TY - THES A1 - Soulié, Virginie T1 - Sessile droplets of salt solutions on inert and metallic surfaces T1 - Gouttes sessiles de solutions salines sur des surfaces inertes et métalliques BT - influence of salt concentration gradients on evaporation and corrosion behaviour BT - influence des gradients de concentration en sel sur la dynamique d’Evaporation et le processus de corrosion N2 - In this thesis we investigate the evaporation behaviour of sessile droplets of aqueous saline solutions on planar inert and metallic surfaces and characterise the corrosion phenomenon for iron surfaces. First we study the evaporation behaviour of sessile salty droplets on inert surfaces for a wide range of salt concentrations, relative humidities, droplet sizes and contact angles. Our study reveals the range of validity of the well-accepted diffusion-controlled evaporation model and highlights the impact of salt concentration (surface tension) gradients driven Marangoni flows on the evaporation behaviour and the subsequent salty deposit patterns. Furthermore we study the spatial-temporal evolution of sessile droplets from saline solutions on metallic surfaces. In contrast to the simple, generally accepted Evans droplet model, we show that the corrosion spreads ahead of the macroscopic contact line with a peripheral film. The three-phase contact line is destabilized by surface tension gradients induced by ionic composition changes during the course of the corrosion process and migration of cations towards the droplet perimeter. Finally we investigate the corrosion behaviour under drying salty sessile droplets on metallic surfaces. The corrosion process, in particular the location of anodic and cathodic activities over the footprint droplet area is correlated to the spatial distribution of the salt inside the drying droplet. N2 - Dans cette thèse, la dynamique d’évaporation de gouttes sessiles de solutions salines sur des surfaces planes inertes et métalliques a été étudiée et le phénomène de corrosion pour les surfaces ferriques caractérisé. En premier lieu, nous nous sommes intéressés à la dynamique d’évaporation de gouttes sessiles salées sur des surfaces inertes pour une large gamme de concentrations en sel, d’humidité relatives, de tailles de goutte et d’angles de contact. Notre étude révèle les domaines de validité du modèle classique d’évaporation, processus contrôlé par la diffusion de la vapeur dans l’air et met en évidence l’impact de flux (de Marangoni) induits par des gradients de concentration (tension de surface) en sel sur la dynamique d’évaporation et les dépôts salins obtenus après évaporation de la goutte. De plus, nous nous sommes consacrés à l’évolution spatio-temporelle de gouttes sessiles de solutions salines sur des surfaces métalliques. Contrairement au modèle simplifié de la goutte d’Evans, nous avons montré que le processus de corrosion s’étend aux abords de la ligne de contact, avec la formation d’un film périphérique. La ligne triple est déstabilisée par des gradients de tension de surface induits par des variations de composition ionique au cours du processus de corrosion et la migration des cations vers la périphérie de la goutte. Enfin nous avons étudié le phénomène de corrosion du métal induit par l’évaporation de gouttes sessiles salées. Le processus de corrosion, en particulier la localisation des réactions anodiques et cathodiques sur la surface métallique en contact avec la goutte est corrélée à la distribution spatiale du sel au sein de la goutte s’évaporant. KW - sessile droplet KW - salt KW - evaporation KW - corrosion KW - liegende Tropfen KW - Salz KW - Verdunstung KW - Korrosion KW - gouttes sessiles KW - sel KW - evaporation KW - corrosion Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90329 ER - TY - THES A1 - Jehannin, Marie T1 - About the role of physico-chemical properties and hydrodynamics on the progress of a precipitation reaction T1 - Über die Rolle physikalisch-chemischer Eigenschaften und Hydrodynamiken auf den Fortschritt einer Fällungsreaktion BT - the case of cerium oxalate particles produced during coalescence of drops BT - Ceroxalat-Partikel, entstanden während der Koaleszenz von Tropfen N2 - The size and morphology control of precipitated solid particles is a major economic issue for numerous industries. For instance, it is interesting for the nuclear industry, concerning the recovery of radioactive species from used nuclear fuel. The precipitates features, which are a key parameter from the post-precipitate processing, depend on the process local mixing conditions. So far, the relationship between precipitation features and hydrodynamic conditions have not been investigated. In this study, a new experimental configuration consisting of coalescing drops is set to investigate the link between reactive crystallization and hydrodynamics. Two configurations of aqueous drops are examined. The first one corresponds to high contact angle drops (>90°) in oil, as a model system for flowing drops, the second one correspond to sessile drops in air with low contact angle (<25°). In both cases, one reactive is dissolved in each drop, namely oxalic acid and cerium nitrate. When both drops get into contact, they may coalesce; the dissolved species mix and react to produce insoluble cerium oxalate. The precipitates features and effect on hydrodynamics are investigated depending on the solvent. In the case of sessile drops in air, the surface tension difference between the drops generates a gradient which induces a Marangoni flow from the low surface tension drop over the high surface tension drop. By setting the surface tension difference between the two drops and thus the Marangoni flow, the hydrodynamics conditions during the drop coalescence could be modified. Diols/water mixtures are used as solvent, in order to fix the surface tension difference between the liquids of both drops regardless from the reactant concentration. More precisely, the used diols, 1,2-propanediol and 1,3-propanediol, are isomer with identical density and close viscosity. By keeping the water volume fraction constant and playing with the 1,2-propanediol and 1,3-propanediol volume fractions of the solvents, the mixtures surface tensions differ up to 10 mN/m for identical/constant reactant concentration, density and viscosity. 3 precipitation behaviors were identified for the coalescence of water/diols/recatants drops depending on the oxalic excess. The corresponding precipitates patterns are visualized by optical microscopy and the precipitates are characterized by confocal microscopy SEM, XRD and SAXS measurements. In the intermediate oxalic excess regime, formation of periodic patterns can be observed. These patterns consist in alternating cerium oxalate precipitates with distinct morphologies, namely needles and “microflowers”. Such periodic fringes can be explained by a feedback mechanism between convection, reaction and the diffusion. N2 - Die Kontrolle der Morphologie und Größe fester durch Fällung erzeugter Partikel ist eine wichtige Herausforderung in Industrie und Forschung. Insbesondere gilt dies für die Wiederaufbereitung verbrauchter Brennstäber in der Atomindustrie. Die Eigenschaften der Ausfällungen hängen von den Mischbedingungen der Flüssigkeiten in den Prozessen ab. Dennoch sind die Beziehungen zwischen den physischen Charakteristiken der erzeugten Partikeln und den hydrodynamischen Bedingungen ungewiss. In dieser Arbeit werden Zwei-Tropfen-Koalezenz-Experiment genutzt, um die Verbindungen zwischen Hydrodynamik und Fällungsreaktion besser zu verstehen. Zwei Konfigurationen von ruhenden wässrigen Tropfen wurden untersucht: Zum einen Tropfen mit hohem Kontaktwinkel (> 90°) in Öl und zum anderen Tropfen mit kleinem Kontaktwinkel (< 25°) in Luft. In beiden Fällen wurde Oxalsäure und Ceriumnitrat jeweils in einem Tropfen gelöst. Wenn beide Tropfen einander in Kontakt treten, können sie sich vereinigen. Dabei mischen sich die Reagenzien und erzeugen Ceriumoxalat. In Abhängigkeit von Lösungsmitteln werden die Eigenschaften der Fällung sowie ihr Einfluss auf die Hydrodynamik untersucht. In Experimenten Tropfen in Luft ist es außerdem möglich, mittels Wasser/Diol-Mischungen den Oberflächenspannungsgradienten zwischen beiden Tropfenflüssigkeiten zu ändern. Damit ist es möglich den resultierenden Marangoni-Fluss zu kontrollieren. So werden die hydrodynamischen Bedingungen unabhängig von dem Oxalsäureüberschuss verwirklicht. In diesem Fall werden drei Fällungsverhalten abhängig er Oxalsäure-Konzentration beobachtet. Das Zwischenverhalten zeigt überraschende periodische Strukturen, welche verschiedenen Morphologien bilden, nämlich Nägeln und „Microflower“. Die Strukturen wurden über Optische Mikroskopie Identifiziert und charakterisiert mit Hilfe von Konfokaler Mikroskopie, SEM, XRD und SAXS. Die Entstehung solcher Strukturen könnte durch eine Konvektion- Diffusion- Reaktion-Rückkopplung erklärt werden. N2 - Réussir à contrôler la morphologie et la taille de particules solides obtenues par précipitation est un enjeu industriel majeur. C’est notamment le cas dans l’industrie nucléaire pour le recyclage du combustible usé. Les caractéristiques des précipités sont liées aux conditions de mélange des phases liquides dans les procédés. Les corrélations entre les paramètres physiques des particules obtenues et les conditions hydrodynamiques n’ont pas été examinées jusqu’à présent. Dans cette étude, des systèmes expérimentaux originaux, basés sur la coalescence de deux gouttes, sont utilisés afin de mieux comprendre les liens entre hydrodynamique et réaction de précipitation. Deux configurations de gouttes aqueuses ont été investiguées, la première consiste en deux goutes posées à fort angle de contact (>90°) dans l’huile, il s’agit d’un système modèle pour les gouttes en émulsion, la second configuration correspond à deux gouttes posées à faible angle de contact (>25°) dans l’air. Dans chaque cas, une espèce réactive est dissoute dans chaque goutte, à savoir de l’acide oxalique ou du nitrate de cérium dans la seconde. Lorsque les deux gouttes se touchent, elles peuvent éventuellement coalescer, alors les espèces chimiques se mélangent et réagissent pour produire un précipité d’oxalate de cérium. Les caractéristiques de ce précipité et ses effets sur l’hydrodynamique sont examinés en fonction du solvant utilisé. De plus, dans le cas des gouttes posées sur une surface de silice dans l’air, une différence de tension de surface entre deux gouttes crée un gradient qui génère un flux de Marangoni dirigé de la goutte de faible tension de surface au-dessus de la goutte de forte tension de surface. En jouant sur la différence de tension de surface entre les deux gouttes, et ainsi sur le flux de Marangoni, il est possible de modifier les conditions hydrodynamiques lors de la coalescence des gouttes. Des mélanges eau/diols ont été utilisés comme solvant afin de pouvoir modifier la différence de tension de surface entre les liquides des deux gouttes indépendamment de leur concentration en réactif. Les diols utilisés, le 1,2-propanediol et le 1,3-propanediol sont des isomères, ils sont la même densité, des viscosités semblables mais des tensions de surface différentes. En fixant la fraction volumique d’eau dans le solvant, et en jouant sur les fractions volumiques de chaque diols, il est possible de contrôler la tension de surface des mélanges sur une gamme de 10 mN/m pour une concentration en réactifs donnée, et en conservant la densité et viscosité des solvants. Trois régimes de précipitation ont été identifiés dans le cas de la coalescence de gouttes d’eau/diols/réactifs en fonction de l’excès oxalique. Les motifs de précipitation en découlant ont été imagés par microscopie optique et les différents précipités ont été caractérisés à l’aide de microscopie confocale, MEB, DRX et SAXS. Le régime intermédiaire présente des motifs périodiques surprenants. Ces motifs correspondent à des domaines nettement délimités d’oxalate de cérium de différentes morphologies, à savoir des aiguilles et des « microflowers ». L’obtention de tels motifs peut s’expliquer par un mécanisme de rétroaction entre convection, réaction et diffusion. KW - Marangoni flow KW - coalescence KW - periodic pattern KW - oxalic precipitation KW - drop KW - Marangoni-Fluss KW - Koaleszenz KW - Tropfen KW - Fällungsreaktion KW - periodisches Muster KW - Oxalat-Fällung KW - flux de Marangoni KW - coalescence KW - gouttes KW - précipitation KW - motif périodique KW - précipitation oxalique Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-88364 ER - TY - THES A1 - Ambrogi, Martina T1 - Application of Poly(Ionic Liquid)s for the synthesis of functional carbons Y1 - 2015 ER - TY - THES A1 - Schwarz, Dana T1 - Nanoporous melamine resin materials BT - synthetic strategies, shape control and adsorption proberties Y1 - 2015 ER - TY - THES A1 - Chen, Zupeng T1 - Novel strategies to improve (photo)catalytic performance of carbon nitride-based composites Y1 - 2015 ER - TY - THES A1 - Taßler, Stephanie T1 - Physical-Chemical Investigation of newly-synthesised Lysine-Based Amino-Functionalised Lipids for gene transfection in 2D and 3D model systems Y1 - 2015 ER - TY - THES A1 - Primus, Philipp-Alexander T1 - High resolution spectroscopy as a tool to unravel structure-reactivity relationships in Eu3+ doped ceria/ceria-zirconia based catalyst nanomaterials Y1 - 2015 ER - TY - THES A1 - Grygiel, Konrad T1 - Poly(ionic liquid) stabilizers and new synthetic approaches T1 - Polyionische Flüssigkeiten als Stabilisatoren und neue Synthesewege N2 - The main focus of the present thesis was to investigate the stabilization ability of poly(ionic liquid)s (PILs) in several examples as well as develop novel chemical structures and synthetic routes of PILs. The performed research can be specifically divided into three parts that include synthesis and application of hybrid material composed of PIL and cellulose nanofibers (CNFs), thiazolium-containing PILs, and main-chain imidazolium-type PILs. In the first chapter, a vinylimidazolium-type IL was polymerized in water in the presence of CNFs resulting in the in situ electrostatic grafting of polymeric chains onto the surface of CNFs. The synthesized hybrid material merged advantages of its two components, that is, superior mechanical strength of CNFs and anion dependent solution properties of PILs. In contrast to unmodified CNFs, the hybrid could be stabilized and processed in organic solvents enabling its application as reinforcing agent for porous polyelectrolyte membranes. In the second part, PILs and ionic polymers containing two types of thiazolium repeating units were synthesized. Such polymers displayed counterion dependent thermal stability and solubility in organic solvents of various dielectric constants. This new class of PILs was tested as stabilizers and phase transfer agents for carbon nanotubes in aqueous and organic media, and as binder materials to disperse electroactive powders and carbon additives in solid electrode in lithium-ion batteries. The incorporation of S and N atoms into the polymeric structures make such PILs also potential precursors for S, N - co-doped carbons. In the last chapter, reactants originating from biomass were successfully harnessed to synthesize main-chain imidazolium-type PILs. An imidazolium-type diester IL obtained via a modified Debus-Radziszewski reaction underwent transesterification with diol in a polycondensation reaction. This yielded a polyester-type PIL which CO2 sorption properties were investigated. In the next step, the modified Debus-Radziszewski reaction was further applied to synthesize main-chain PILs according to a convenient, one-step protocol, using water as a green solvent and simple organic molecules as reagents. Depending on the structure of the employed diamine, the synthesized PILs after anion exchange showed superior thermal stability with unusually high carbonization yields. Overall, the outcome of these studies will actively contribute to the current research on PILs by introducing novel PIL chemical structures, improved synthetic routes, and new examples of stabilized materials. The synthesis of main-chain imidazolium-type PILs by a modified Debus-Radziszewski reaction is of a special interest for the future work on porous ionic liquid networks as well as colloidal PIL nanoparticles. N2 - Im Mittelpunkt der vorliegenden Arbeit stand die Entwicklung neuer polymerer ionischen Flüssigkeiten (PILs) mittels neuer Synthesewege als auch auf diesen PILs basierenden Kompositmaterialien. Die hergestellten Materialien wurden folgend hinsichtlich ihrer Tauglichkeit als Stabilisatoren, Phasentransferreagenzien, „binder“ oder CO2-Absorber untersucht. Die Untersuchungen lassen sich in drei Teile untergliedern und beinhalten Herstellung und Anwendungsuntersuchungen von Hybridmaterialien basierend auf PILs und Cellulosefasern im Nanometerbereich (CNF), von PILs mit Thiazoliumgruppen und schließlich PILs welche teilweise oder vollständig aus Biomaterialien hergestellt wurden mit Imidazoliumgruppen in der Hauptkette. In Gegenwart von CNF wurde eine vinylimidazoliumbasierte ionische Flüssigkeit (IL) in Wasser polymerisiert. Dies führte in situ zu einem elektrostatischen angraften der Ketten auf der Oberfläche der CNFs. Diese Kompositmaterialien vereinigen die Vorteile beider Komponenten, die außerordentliche mechanische Stabilität der CNFs und die vielseitigen mittels Gegenionen einstellbaren Lösungseigenschaften der PIL. Beispielsweise können diese Hybridmaterialien im Gegensatz zu den unmodifizierten CNFs in organischen Lösungsmitteln und somit zur Verstärkung für poröse Polyelektrolytmembranen eingesetzt werden. Im zweiten Teil wurden PILs und ioniosche Polymere synthetisiert mit Thiazoliumkationen in den Monomerbausteinen. Diese Polymere zeigten eine vom Gegenion abhängige thermische Stabilität und Löslichkeit in Lösungsmitteln verschiedenster Dielektrizitätskonstanten. Diese neue Klasse der PILs bzw. ionischen Polymere wurde hinsichtlich der Nutzbarkeit als Vorläufer für Stickstoff- und Schwefel-codotierte Kohlenstoffsysteme, Stabilisator sowie Phasentransferreagenz für „carbon nanotubes“ in wässrigem und organischen Lösungsmitteln und „binder“ für Elektrodenmaterialien in Lithiumionenbatterien. Im letzten Teil wurden aus Biomaterialien die Ausgangsstoffe für PILs mit imidazoliumbasierter Hauptkette gewonnen. Hierzu wurde der imidazoliumbasierende Diester mittels abgewandelter Debus-Radziszewski-Reaktion gewonnen und eine Umesterung mittels eines ebenfalls aus Biomaterialien stammenden Diols vorgenommen. Die erhaltene polyesterbasierte PIL wurde folgend hinsichtlich ihres CO2 – Absorbtionspotentials untersucht. Die geänderte Debus-Radziszewski-Reaktion wurde folgend für eine PIL-Einstufensynthese mit Wasser als grünem Lösungsmittel und einfachen hauptsächlich aus Biomasse gewonnen Reagenzien herangezogen. Abhängig von den eingesetzten Diaminen und Gegenionen konnten für die hergestellten PILs hervorragende thermische Stabilitäten oder beträchtliche Karbonisierungsausbeuten erreicht werden, welche für PILs zu den höchsten publizierten Werten in der Literatur zählen. Die vorgelegten Studien stellen einen wichtigen Beitrag auf dem Gebiet der PIL-Forschung dar mit neuen PIL-Strukturen, verbesserten Synthesewegen und neuen Stabilisierungsmöglichkeiten. Die Synthese der Hauptkettenimidazolium-PIL mittels angepasster Debus-Radziszewski-Reaktion ist eine vielversprechende Methode sowohl für die Herstellung poröser IL-Netzwerke als auch kolloidaler PIL-Nanopartikel. KW - ionic polymers KW - polymerised ionic liquids KW - ionic liquids KW - Debus-Radziszewski polymerization KW - thiazolium KW - ionische Flüssigkeit KW - Thiazol-Salze KW - ionischen Polymere KW - elektroaktive Polymere Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-80367 ER -