TY - JOUR A1 - Coesfeld, Jacqueline A1 - Kuester, Theres A1 - Kuechly, Helga U. A1 - Kyba, Christopher C. M. T1 - Reducing variability and removing natural light from nighttime satellite imagery: A case study using the VIIRS DNB JF - Sensors N2 - Temporal variation of natural light sources such as airglow limits the ability of night light sensors to detect changes in small sources of artificial light (such as villages). This study presents a method for correcting for this effect globally, using the satellite radiance detected from regions without artificial light emissions. We developed a routine to define an approximate grid of locations worldwide that do not have regular light emission. We apply this method with a 5 degree equally spaced global grid (total of 2016 individual locations), using data from the Visible Infrared Imaging Radiometer Suite (VIIRS) Day-Night Band (DNB). This code could easily be adapted for other future global sensors. The correction reduces the standard deviation of data in the Earth Observation Group monthly DNB composites by almost a factor of two. The code and datasets presented here are available under an open license by GFZ Data Services, and are implemented in the Radiance Light Trends web application. KW - airglow KW - artificial light KW - calibration KW - VIIRS DNB KW - nightlights KW - remote sensing Y1 - 2020 VL - 20 PB - MDPI CY - Basel ER - TY - JOUR A1 - Kappel, Marcel A1 - Abel, Markus A1 - Gerhard, Reimund T1 - Characterization and calibration of piezoelectric polymers in situ measurements of body vibrations JF - Review of scientific instruments : a monthly journal devoted to scientific instruments, apparatus, and techniques N2 - Piezoelectric polymers are known for their flexibility in applications, mainly due to their bending ability, robustness, and variable sensor geometry. It is an optimal material for minimal-invasive investigations in vibrational systems, e.g., for wood, where acoustical impedance matches particularly well. Many applications may be imagined, e. g., monitoring of buildings, vehicles, machinery, alarm systems, such that our investigations may have a large impact on technology. Longitudinal piezoelectricity converts mechanical vibrations normal to the polymer-film plane into an electrical signal, and the respective piezoelectric coefficient needs to be carefully determined in dependence on the relevant material parameters. In order to evaluate efficiency and durability for piezopolymers, we use polyvinylidene fluoride and measure the piezoelectric coefficient with respect to static pressure, amplitude of the dynamically applied force, and long-term stability. A known problem is the slow relaxation of the material towards equilibrium, if the external pressure changes; here, we demonstrate how to counter this problem with careful calibration. Since our focus is on acoustical measurements, we determine accurately the frequency response curve - for acoustics probably the most important characteristic. Eventually, we show that our piezopolymer transducers can be used as a calibrated acoustical sensors for body vibration measurements on a wooden musical instrument, where it is important to perform minimal-invasive measurements. A comparison with the simultaneously recorded airborne sound yields important insight of the mechanism of sound radiation in comparison with the sound propagating in the material. This is especially important for transient signals, where not only the long-living eigenmodes contribute to the sound radiation. Our analyses support that piezopolymer sensors can be employed as a general tool for the determination of the internal dynamics of vibrating systems. KW - acoustic transducers KW - calibration KW - durability KW - electric sensing devices KW - piezoelectricity KW - polymers Y1 - 2011 U6 - https://doi.org/10.1063/1.3607435 SN - 0034-6748 VL - 82 IS - 7 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Francke, Till A1 - Heistermann, Maik A1 - Köhli, Markus A1 - Budach, Christian A1 - Schrön, Martin A1 - Oswald, Sascha T1 - Assessing the feasibility of a directional cosmic-ray neutron sensing sensor for estimating soil moisture JF - Geoscientific Instrumentation, Methods and Data Systems N2 - Cosmic-ray neutron sensing (CRNS) is a non-invasive tool for measuring hydrogen pools such as soil moisture, snow or vegetation. The intrinsic integration over a radial hectare-scale footprint is a clear advantage for averaging out small-scale heterogeneity, but on the other hand the data may become hard to interpret in complex terrain with patchy land use. This study presents a directional shielding approach to prevent neutrons from certain angles from being counted while counting neutrons entering the detector from other angles and explores its potential to gain a sharper horizontal view on the surrounding soil moisture distribution. Using the Monte Carlo code URANOS (Ultra Rapid Neutron-Only Simulation), we modelled the effect of additional polyethylene shields on the horizontal field of view and assessed its impact on the epithermal count rate, propagated uncertainties and aggregation time. The results demonstrate that directional CRNS measurements are strongly dominated by isotropic neutron transport, which dilutes the signal of the targeted direction especially from the far field. For typical count rates of customary CRNS stations, directional shielding of half-spaces could not lead to acceptable precision at a daily time resolution. However, the mere statistical distinction of two rates should be feasible. KW - water-balance KW - quantification KW - calibration KW - validation Y1 - 2021 U6 - https://doi.org/10.5194/gi-11-75-2022 SN - 2193-0864 SN - 2193-0856 VL - 11 SP - 75 EP - 92 PB - Copernicus Publ. CY - Göttingen ER -