TY - GEN A1 - Peter, Martin G. A1 - Förster, Hans T1 - On the structure of Eumelanins : identification of constitutional patterns by solid-state NMR spectroscopy N2 - Aus dem Inhalt: Melanins are complex polyphenolic polymers. They are usually formed in nature by enzyme-catalyzed oxidative polymerization of o-diphenols. The deep black eumelanins, derived from Dopa 1 or dopamine 3, are distinguished from the yellow to brown phaeomelanins obtained from Dopa in the presence of cysteine. Characteristic of eumelanins are the indole units, which are formed from catecholamines by intramolecular addition of the amino groups to the oxidatively generated o-quinones. [...] T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 053 Y1 - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17027 ER - TY - GEN A1 - Peter, Martin G. A1 - Muiva, Lois M. A1 - Yenesew, Abiy A1 - Derese, Solomon A1 - Heydenreich, Matthias A1 - Akala, Hoseah M. A1 - Eyase, Fredrick A1 - Waters, Norman C. A1 - Mutai, Charles A1 - Keriko, Joseph M. A1 - Walsh, Douglas S. T1 - Antiplasmodial β-hydroxydihydrochalcone from seedpods of Tephrosia elata N2 - From the seedpods of Tephrosia elata, a new β-hydroxydihydrochalcone named (S)-elatadihydrochalcone was isolated. In addition, the known flavonoids obovatachalcone, obovatin, obovatin methyl ether and deguelin were identified. The structures were determined on the basis of spectroscopic evidence. The crude extract and the flavonoids obtained from the seedpods of this plant showed antiplasmodial activities. The literature NMR data on β-hydroxydihydrochalcones is reviewed and the identity of some of the compounds assigned β-hydroxydihydrochalcone skeleton is questioned. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 118 KW - Tephrosia elata KW - Leguminosae KW - Seedpods KW - (S)-Elatadihydrochalcone KW - β-Hydroxydihydrochalcone Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-44437 ER - TY - GEN A1 - Peter, Martin G. A1 - Yenesew, Abiy A1 - Twinomuhwezi, Hannington A1 - Kabaru, Jacques M. A1 - Akala, Hoseah M. A1 - Kiremire, Bernard T. A1 - Heydenreich, Matthias A1 - Eyase, Fredrick A1 - Waters, Norman C. A1 - Walsh, Douglas S. T1 - Antiplasmodial and larvicidal flavonoids from Derris trifoliata N2 - From the dichloromethane-methanol (1:1) extract of the seed pods of Derris trifoliata, a new flavanone derivative (S)-lupinifolin 4´-methyl ether was isolated. In addition, the known flavonoids lupinifolin and rotenone were identified. The structures were determined on the basis of spectroscopic evidence. Lupinfolin showed moderate in vitro antiplasmodial activity against the D6 (chloroquine-sensitive) and W2 (chloroquineresistant) strains of Plasmodium falciparum. The different parts of this plant showed larvicidal activities against Aedes aegypti and rotenoids were identified as the active principles. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 121 KW - Derris trifoliata KW - Leguminosae KW - Flavanone KW - (S)-Lupinifolin 4´-methyl ether KW - Lupinifolin Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-44614 ER - TY - THES A1 - Phung, Thi Thuy Nga T1 - Defect chemistry in halide perovskites BT - material characterisation and device integration N2 - Metallhalogenid-Perowskite haben sich aufgrund ihrer hervorragenden optoelektronischen Eigenschaften zu einer attraktiven Materialklasse für die Photovoltaikindustrie entwickelt. Die Langzeitstabilität ist jedoch noch immer ein Hindernis für die industrielle Realisierung dieser Materialklasse. Zunehmend zeigen sich Hinweise dafür, dass intrinsische Defekte im Perowskit die Material-Degradation fördern. Das Verständnis der Defekte im Perowskit ist wichtig, um seine Stabilität und optoelektronische Qualität weiter zu verbessern. Diese Dissertation konzentriert sich daher auf das Thema Defektchemie im Perowskit. Der erste Teil der Dissertation gibt einen kurzen Überblick über die Defekteigenschaften von Halogenid-Perowskiten. Anschließend zeigt der zweite Teil, dass das Dotieren von Methylammoniumbleiiodid mit einer kleinen Menge von Erdalkalimetallen (Sr und Mg) ein höherwertiges, weniger fehlerhaftes Material erzeugt, was zu hohen Leerlaufspannungen sowohl in der n-i-p als auch in der p-i-n Architektur von Solarzellen führt. Es wurde beobachtet, dass die Dotierung in zwei Domänen stattfindet: eine niedrige Dotierungskonzentration führt zum Einschluss der entsprechenden Elemente in das Kristallgitter ermöglicht, während eine hohe Dotierungskonzentration zu einer Phasentrennung führt. Das Material kann im Niedrigdotierungsbereich mehr n-dotiert sein, während es im Hochdotierungsbereich weniger n-dotiert ist. Die Schwelle dieser beiden Regime hängt von der Atomgröße der Dotierelemente ab. Der nächste Teil der Dissertation untersucht die photoinduzierte Degradation von Methylammonium-Bleiiodid. Dieser Abbaumechanismus hängt eng mit der Bildung und Migration von defekten zusammen. Nach der Bildung können sich diese in Abhängigkeit von der Defektdichte und ihrer Verteilung bewegen. Demnach kann eine hohe Defektdichte wie an den Korngrenzen eines Perowskitfilms die Beweglichkeit von ionischen Punktdefekten hemmen. Diese Erkenntnis ließe sich auf das zukünftige Materialdesign in der Photovoltaikindustrie anwenden, da die Perowskit-Solarzellen normalerweise einen polykristallinen Dünnfilm mit hoher Korngrenzendichte verwenden. Die abschließende Studie, die in dieser Dissertation vorgestellt wird, konzentriert sich auf die Stabilität der neuesten „dreifach-kationen“ Perowskit-basierten Solarzellen unter dem Einfluss einer permanent angelegten elektrischen Spannung. Eine längere Betriebsdauer (mehr als drei Stunden permanente Spannung) fördert die Amorphisierung im Halogenid-Perowskiten. Es wird hierbei vermutet, dass sich eine amorphe Phase an den Grenzflächen bildet, insbesondere zwischen der lochselektiven Schicht und dem Perowskit. Diese amorphe Phase hemmt den Ladungstransport und beeinträchtigt die Leistung der Perowskit-Solarzelle erheblich. Sobald jedoch keine Spannung mehr anliegt können sich die Perowskitschichten im Dunkeln bereits nach einer kurzen Pause regenerieren. Die Amorphisierung wird auf die Migration von ionischen Fehlordnungen zurückgeführt, höchstwahrscheinlich auf die Migration von Halogeniden. Dieser Ansatz zeigt ein neues Verständnis des Abbau-Mechanismus in Perowskit-Solarzellen unter Betriebsbedingungen. N2 - Metal halide perovskites have merged as an attractive class of materials for photovoltaic applications due to their excellent optoelectronic properties. However, the long term stability is a roadblock for this class of material’s industrial pathway. Increasing evidence shows that intrinsic defects in perovskite promote material degradation. Consequently, understanding defect behaviours in perovskite materials is essential to further improve device stability and performance. This dissertation, hence, focuses on the topic of defect chemistry in halide perovskites. The first part of the dissertation gives a brief overview of the defect properties in halide perovskite. Subsequently, the second part shows that doping methylammonium lead iodide with a small amount of alkaline earth metals (Sr and Mg) creates a higher quality, less defective material resulted in high open circuit voltages in both n-i-p and p-i-n architecture. It has been found that the mechanism of doping has two distinct regimes in which a low doping concentration enables the inclusion of the dopants into the lattice whereas higher doping concentrations lead to phase segregation. The material can be more n-doped in the low doping regime while being less n-doped in the high doping regime. The threshold of these two regimes is based on the atomic size of the dopants. The next part of the dissertation examines the photo-induced degradation in methylammonium lead iodide. This degradation mechanism links closely to the formation and migration of ionic defects. After they are formed, these ionic defects can migrate, however, not freely depending on the defect concentration and their distribution. In fact, a highly concentrated defect region such as the grain boundaries can inhibit the migration of ionic defects. This has implications for material design as perovskite solar cells normally employ a polycrystalline thin-film which has a high density of grain boundary. The final study presented in this PhD dissertation focuses on the stability of the state-of-the-art triple cation perovskite-based solar devices under external bias. Prolonged bias (more than three hours) is found to promote amorphization in halide perovskite. The amorphous phase is suspected to accumulate at the interfaces especially between the hole selective layer and perovskite. This amorphous phase inhibits the charge collection and severely affects the device performance. Nonetheless, the devices can recover after resting without bias in the dark. This amorphization is attributed to ionic defect migration most likely halides. This provides a new understanding of the potential degradation mechanisms in perovskite solar cells under operational conditions. KW - halide perovskite KW - solar cells KW - defect chemistry KW - ionic defects KW - Defektchemie KW - Halogenid-Perowskite KW - Defekte KW - Solarzellen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-476529 ER - TY - GEN A1 - Pieper, Imke A1 - Wehe, Christoph A. A1 - Bornhorst, Julia A1 - Ebert, Franziska A1 - Leffers, Larissa A1 - Holtkamp, Michael A1 - Höseler, Pia A1 - Weber, Till A1 - Mangerich, Aswin A1 - Bürkle, Alexander A1 - Karst, Uwe A1 - Schwerdtle, Tanja T1 - Mechanisms of Hg species induced toxicity in cultured human astrocytes BT - genotoxicity and DNA-damage response N2 - The toxicologically most relevant mercury (Hg) species for human exposure is methylmercury (MeHg). Thiomersal is a common preservative used in some vaccine formulations. The aim of this study is to get further mechanistic insight into the yet not fully understood neurotoxic modes of action of organic Hg species. Mercury species investigated include MeHgCl and thiomersal. Additionally HgCl2 was studied, since in the brain mercuric Hg can be formed by dealkylation of the organic species. As a cellular system astrocytes were used. In vivo astrocytes provide the environment necessary for neuronal function. In the present study, cytotoxic effects of the respective mercuricals increased with rising alkylation level and correlated with their cellular bioavailability. Further experiments revealed for all species at subcytotoxic concentrations no induction of DNA strand breaks, whereas all species massively increased H2O2-induced DNA strand breaks. This co- genotoxic effect is likely due to a disturbance of the cellular DNA damage response. Thus, at nanomolar, sub-cytotoxic concentrations, all three mercury species strongly disturbed poly(ADP-ribosyl)ation, a signalling reaction induced by DNA strand breaks. Interestingly, the molecular mechanism behind this inhibition seems to be different for the species. Since chronic PARP-1 inhibition is also discussed to sacrifice neurogenesis and learning abilities, further experiments on neurons and in vivo studies could be helpful to clarify whether the inhibition of poly(ADP-ribosyl) ation contributes to organic Hg induced neurotoxicity. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 171 KW - adduct formation KW - cell-death KW - exposure KW - manganese KW - methylmercury KW - neurodegenerative diseases KW - neurotoxicity KW - poly(ADP-ribose) polymerase-1 KW - repair KW - thimerosal Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-74379 SP - 662 EP - 671 ER - TY - THES A1 - Piluso, Susanna T1 - Design of biopolymer-based networks with defined molecular architecture T1 - Design biopolymer-basierter Netzwerke mit definierter molekularer Architektur N2 - In this work, the synthesis of biopolymer-based hydrogel networks with defined architecture is presented. In order to obtain materials with defined properties, the chemoselective copper-catalyzed azide-alkyne cycloaddition (or Click Chemistry) was used for the synthesis of gelatin-based hydrogels. Alkyne-functionalized gelatin was reacted with four different diazide crosslinkers above its sol-gel transition to suppress the formation of triple helices. By variation of the crosslinking density and the crosslinker flexibility, the swelling (Q: 150-470 vol.-%;) and the Young’s and shear moduli (E: 50 kPa - 635 kPa, G’: 0.1 kPa - 16 kPa) could be tuned in the kPa range. In order to understand the network structure, a method based on the labelling of free functional groups within the hydrogel was developed. Gelatin-based hydrogels were incubated with alkyne-functionalized fluorescein to detect the free azide groups, resulting from the formation of dangling chains. Gelatin hydrogels were also incubated with azido-functionalized fluorescein to check the presence of alkyne groups available for the attachment of bioactive molecules. By using confocal laser scanning microscopy and fluorescence spectroscopy, the amount of crosslinking, grafting and free alkyne groups could be determined. Dangling chains were observed in samples prepared by using an excess of crosslinker and also when using equimolar amounts of alkyne:azide. In the latter case the amount of dangling chains was affected by the crosslinker structure. Specifically, 0.1% of dangling chains were found using 4,4’-diazido-2,2’-stilbene-disulfonic acid as cosslinker, 0.06% with 1,8-diazidooctane, 0.05% with 1,12-diazidododecane and 0.022 % with PEG-diazide. This observation could be explained considering the structure of the crosslinkers. During network formation, the movements of the gelatin chains are restricted due to the formation of covalent netpoints. A further crosslinking will be possible only in the case of crosslinker that are flexible and long enough to reach another chain. The method used to obtain defined gelatin-based hydrogels enabled also the synthesis of hyaluronic acid-based hydrogels with tailorable properties. Alkyne-functionalized hyaluronic acid was crosslinked with three different linkers having two terminal azide functionalities. By variation of the crosslinking density and crosslinker type, hydrogels with elastic moduli in the range of 0.5-3 kPa have been prepared. The variation of the crosslinking density and crosslinker type had furthermore an influence also on the hydrolytic and enzymatic degradation of gelatin-based hydrogels. Hydrogels with a low crosslinker amount experienced a faster decrease in mass loss and elastic modulus compared to hydrogels with higher crosslinker content. Moreover, the structure of the crosslinker had a strong influence on the enzymatic degradation. Hydrogels containing a crosslinker with a rigid structure were much more resistant to enzymatic degradation than hydrogels containing a flexible crosslinker. During hydrolytic degradation, the hydrogel became softer while maintaining the same outer dimensions. These observations are in agreement with a bulk degradation mechanism, while the decrease in size of the hydrogels during enzymatic degradation suggested a surface erosion mechanism. Because of the use of small amount of crosslinker (0.002 mol.% 0.02 mol.%) the networks synthesized can still be defined as biopolymer-based hydrogels. However, they contain a small percentage of synthetic residues. Alternatively, a possible method to obtain biopolymer-based telechelics, which could be used as crosslinkers, was investigated. Gelatin-based fragments with defined molecular weight were obtained by controlled degradation of gelatin with hydroxylamine, due to its specific action on asparaginyl-glycine bonds. The reaction of gelatin with hydroxylamine resulted in fragments with molecular weights of 15, 25, 37, and 50 kDa (determined by SDS-PAGE) independently of the reaction time and conditions. Each of these fragments could be potentially used for the synthesis of hydrogels in which all components are biopolymer-based materials. N2 - In dieser Arbeit wird die Synthese Biopolymer-basierter Hydrogelnetzwerke mit definierter Architektur beschrieben. Um Materialien mit definierten und einstellbaren Eigenschaften zu erhalten, wurde die chemoselektive Kupferkatalysierte Azid-Alkin-Cycloadditionsreaktion (auch als Click-Chemie bezeichnet) für die Synthese Gelatine-basierter Netzwerke eingesetzt. Alkin-funktionalisierte Gelatine wurde mit vier verschiedenen Diazid-Quervernetzern oberhalb der Gel-Sol-Übergangstemperatur umgesetzt, um die Formierung tripelhelikaler Bereiche durch Gelatineketten zu unterdrücken. Durch Variation der Menge an Quervernetzer (und damit der Netzdichte) sowie der Länge und Flexibilität der Quervernetzer konnten u.a. die Quellung (Q: 150-470 vol.-%) sowie der Young’s - und Schermodul im kPa Bereich eingestellt werden (E: 50 kPa - 635 kPa, G’: 0.1 kPa - 16 kPa). Um die Netzwerkarchitektur zu verstehen, wurde eine Methode basierend auf dem Labeln unreagierter Azid- und Alkingruppen im Hydrogel entwickelt. Die Gelatine-basierten Hydrogele wurden mit Alkin-funktionalisiertem Fluorescein umgesetzt, um freie Azidgruppen zu detektieren, die bei einem Grafting entstehen. Darüber hinaus wurden die Hydrogele mit Azid-funktionalisiertem Fluorescein reagiert, um die Menge an freien Alkingruppen zu bestimmen, die zudem potentiell für die Anbindung bioaktiver Moleküle geeignet sind. Quervernetzung, Grafting, und die Anzahl freier Alkingruppen konnten dann mit Hilfe der konfokalen Laser Scanning Mikroskopie und der Fluoreszenzmikroskopie qualitativ und quantitativ nachgewiesen werden. Gegraftete Ketten wurden in Systemen nachgewiesen, die mit einem Überschuss an Quervernetzer hergestellt wurden, entstanden aber auch beim Einsatz äquimolarer Mengen Alkin- und Azidgruppen. Im letzteren Fall wurde in Abhängigkeit von der Struktur des Diazids unterschiedliche Anteile gegrafteter Ketten festgestellt. 0.1 mol-% von gegrafteten Ketten wurden für 4,4’-Diazido-2,2’-stilbendisulfonsäure gefunden, 0.06 mol-% für 1,8-Diazidooktan, 0.05 mol% für 1,12-diazidododecan und 0.022 mol-% für PEG-Diazid. Diese Beobachtung kann durch die unterschiedliche Flexibilität der Vernetzer erklärt werden. Während der Netzwerkbildung werden die Bewegungen der Gelatineketten eingeschränkt, so dass kovalente Netzpunkte nur erhalten werden können, wenn der Vernetzer lang und flexibel genug ist, um eine andere Alkingruppe zu erreichen. Die Strategie zur Synthese von Biopolymer-basierten Hydrogelen mit einstellbaren Eigenschaften wurde von Gelatine- auf Hyaluronsäure-basierte Gele übertragen. Alkin-funktionalisierte Hyaluronäure wurde mit drei verschiedenen Diaziden quervernetzt, wobei Menge, Länge, und Flexibilität des Quervernetzers variiert wurden. In dieser Weise wurden sehr weiche Hydrogele mit E-Moduli im Bereich von 0.5-3 kPa hergestellt. Die Variation der Vernetzungsdichte und des Vernetzertyps beeinflusste weiterhin den hydrolytischen und enzymatischen Abbau der Hydrogele. Hydrogele mit einem geringerem Anteil an Quervernetzer wurden schneller abgebaut als solche mit einem höheren Quervernetzeranteil. Darüber hinaus konnte gezeigt werden, dass Hydrogele mit Quervernetzern mit einer rigiden Struktur deutlich langsamer degradierten als Hydrogele mit flexibleren Quervernetzern. Während des hydrolytischen Abbau wurden die Materialien weicher, behielten aber ihre Form bei, was mit einem Bulk-Abbau-Modell übereinstimmt. Während des enzymatischen Abbaus hingegen änderten sich die Materialeigenschaften kaum, jedoch wurden die Proben kleiner. Diese Beobachtung stimmt mit einem Oberflächenabbaumechanismus überein. Da in allen vorgestellten Systemen nur eine kleine Menge synthetischer Vernetzer eingesetzt wurde (0.002 – 0.02 mol%), können die Materialien noch als Biopolymer-basierte Materialien klassifiziert werden. Jedoch enthalten die Materialien synthetische Abschnitte. In Zukunft könnte es interessant sein, einen Zugang zu Materialien zu haben, die ausschließlich aus Biopolymeren aufgebaut sind. Daher wurde der Zugang zu Biopolymer basierten Telechelen untersucht, die potentiell als Vernetzer dienen können. Dazu wurden durch die kontrollierte Spaltung von Gelatine mit Hydroxylamin Gelatinefragmente mit definiertem Molekulargewicht hergestellt. Hydroxalamin reagiert unter Spaltung mit der Amidbindung zwischen Asparagin und Glycin, wobei Aspartylhydroxamate und Aminoendgruppen entstehen. Die Reaktion von Gelatine mit Hydroxylamin ergab Fragmente mit Molekulargewichten von 15, 25, 37, und 50 kDa (bestimmt mit SDS-PAGE), und die Formierung dieser Fragmente war unabhängig von den weiteren Reaktionsbedingungen und der Reaktionszeit. Jedes dieser Fragmente kann potentiell für die Synthese von Hydrogelen eingesetzt werden, die ausschließlich aus Biopolymeren bestehen. KW - Klickchemie KW - Gelatine KW - Hyaluronsäure KW - Abbau KW - Kollagenase KW - Click Chemistry KW - Gelatin KW - Hyaluronic acid KW - Degradation KW - Collagenase Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59865 ER - TY - GEN A1 - Plehn, Thomas A1 - Megow, Jörg A1 - May, Volkhard T1 - Concerted charge and energy transfer processes in a highly flexible fullerene–dye system BT - a mixed quantum–classical study N2 - Photoinduced excitation energy transfer and accompanying charge separation are elucidated for a supramolecular system of a single fullerene covalently linked to six pyropheophorbide-a dye molecules. Molecular dynamics simulations are performed to gain an atomistic picture of the architecture and the surrounding solvent. Excitation energy transfer among the dye molecules and electron transfer from the excited dyes to the fullerene are described by a mixed quantum–classical version of the Förster rate and the semiclassical Marcus rate, respectively. The mean characteristic time of energy redistribution lies in the range of 10 ps, while electron transfer proceeds within 150 ps. In between, on a 20 to 50 ps time-scale, conformational changes take place in the system. This temporal hierarchy of processes guarantees efficient charge separation, if the structure is exposed to a solvent. The fast energy transfer can adopt the dye excitation to the actual conformation. In this sense, the probability to achieve charge separation is large enough since any dominance of unfavorable conformations that exhibit a large dye–fullerene distance is circumvented. And the slow electron transfer may realize an averaging with respect to different conformations. To confirm the reliability of our computations, ensemble measurements on the charge separation dynamics are simulated and a very good agreement with the experimental data is obtained. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 279 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98791 ER - TY - THES A1 - Popovic, Jelena T1 - Novel lithium iron phosphate materials for lithium-ion batteries T1 - Neuartige Lithium-Eisen-Phosphat-Materialien für Lithium-Ionen-Batterien N2 - Conventional energy sources are diminishing and non-renewable, take million years to form and cause environmental degradation. In the 21st century, we have to aim at achieving sustainable, environmentally friendly and cheap energy supply by employing renewable energy technologies associated with portable energy storage devices. Lithium-ion batteries can repeatedly generate clean energy from stored materials and convert reversely electric into chemical energy. The performance of lithium-ion batteries depends intimately on the properties of their materials. Presently used battery electrodes are expensive to be produced; they offer limited energy storage possibility and are unsafe to be used in larger dimensions restraining the diversity of application, especially in hybrid electric vehicles (HEVs) and electric vehicles (EVs). This thesis presents a major progress in the development of LiFePO4 as a cathode material for lithium-ion batteries. Using simple procedure, a completely novel morphology has been synthesized (mesocrystals of LiFePO4) and excellent electrochemical behavior was recorded (nanostructured LiFePO4). The newly developed reactions for synthesis of LiFePO4 are single-step processes and are taking place in an autoclave at significantly lower temperature (200 deg. C) compared to the conventional solid-state method (multi-step and up to 800 deg. C). The use of inexpensive environmentally benign precursors offers a green manufacturing approach for a large scale production. These newly developed experimental procedures can also be extended to other phospho-olivine materials, such as LiCoPO4 and LiMnPO4. The material with the best electrochemical behavior (nanostructured LiFePO4 with carbon coating) was able to delive a stable 94% of the theoretically known capacity. N2 - Konventionelle Energiequellen sind weder nachwachsend und daher nachhaltig nutzbar, noch weiterhin langfristig verfügbar. Sie benötigen Millionen von Jahren um gebildet zu werden und verursachen in ihrer Nutzung negative Umwelteinflüsse wie starke Treibhausgasemissionen. Im 21sten Jahrhundert ist es unser Ziel nachhaltige und umweltfreundliche, sowie möglichst preisgünstige Energiequellen zu erschließen und nutzen. Neuartige Technologien assoziiert mit transportablen Energiespeichersystemen spielen dabei in unserer mobilen Welt eine große Rolle. Li-Ionen Batterien sind in der Lage wiederholt Energie aus entsprechenden Prozessen nutzbar zu machen, indem sie reversibel chemische in elektrische Energie umwandeln. Die Leistung von Li-Ionen Batterien hängen sehr stark von den verwendeten Funktionsmaterialien ab. Aktuell verwendete Elektrodenmaterialien haben hohe Produktionskosten, verfügen über limitierte Energiespeichekapazitäten und sind teilweise gefährlich in der Nutzung für größere Bauteile. Dies beschränkt die Anwendungsmöglichkeiten der Technologie insbesondere im Gebiet der hybriden Fahrzeugantriebe. Die vorliegende Dissertation beschreibt bedeutende Fortschritte in der Entwicklung von LiFePO4 als Kathodenmaterial für Li-Ionen Batterien. Mithilfe einfacher Syntheseprozeduren konnten eine vollkommen neue Morphologie (mesokristallines LiFePo4) sowie ein nanostrukturiertes Material mit exzellenten elektrochemischen Eigenschaften hergestellt werden. Die neu entwickelten Verfahren zur Synthese von LiFePo4 sind einschrittig und bei signifikant niedrigeren Temperaturen im Vergleich zu konventionellen Methoden. Die Verwendung von preisgünstigen und umweltfreundlichen Ausgangsstoffen stellt einen grünen Herstellungsweg für die large scale Synthese dar. Mittels des neuen Synthesekonzepts konnte meso- und nanostrukturiertes LiFe PO4 generiert werden. Die Methode ist allerdings auch auf andere phospho-olivin Materialien (LiCoPO4, LiMnPO4) anwendbar. Batterietests der besten Materialien (nanostrukturiertes LiFePO4 mit Kohlenstoffnanobeschichtung) ergeben eine mögliche Energiespeicherung von 94%. KW - Li-Ionen-Akkus KW - Kathode KW - LiFePO4 KW - Mesokristalle KW - Nanopartikel KW - Li-ion batteries KW - cathode KW - LiFePO4 KW - mesocrystals KW - nanoparticles Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-54591 ER - TY - GEN A1 - Prestel, Andreas A1 - Möller, Heiko Michael T1 - Spatio-temporal control of cellular uptake achieved by photoswitchable cell-penetrating peptides N2 - The selective uptake of compounds into specific cells of interest is a major objective in cell biology and drug delivery. By incorporation of a novel, thermostable azobenzene moiety we generated peptides that can be switched optically between an inactive state and an active, cell-penetrating state with excellent spatio-temporal control. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 218 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89658 SP - 701 EP - 704 ER - TY - THES A1 - Prinz, Julia T1 - DNA origami substrates as a versatile tool for surface-enhanced Raman scattering (SERS) T1 - DNA Origami-Substrate als ein vielseitiges Werkzeug für die oberflächenverstärkte Raman-Streuung (SERS) N2 - Surface-enhanced Raman scattering (SERS) is a promising tool to obtain rich chemical information about analytes at trace levels. However, in order to perform selective experiments on individual molecules, two fundamental requirements have to be fulfilled. On the one hand, areas with high local field enhancement, so-called “hot spots”, have to be created by positioning the supporting metal surfaces in close proximity to each other. In most cases hot spots are formed in the gap between adjacent metal nanoparticles (NPs). On the other hand, the analyte has to be positioned directly in the hot spot in order to profit from the highest signal amplification. The use of DNA origami substrates provides both, the arrangement of AuNPs with nm precision as well as the ability to bind analyte molecules at predefined positions. Consequently, the present cumulative doctoral thesis aims at the development of a novel SERS substrate based on a DNA origami template. To this end, two DNA-functionalized gold nanoparticles (AuNPs) are attached to one DNA origami substrate resulting in the formation of a AuNP dimer and thus in a hot spot within the corresponding gap. The obtained structures are characterized by correlated atomic force microscopy (AFM) and SERS imaging which allows for the combination of structural and chemical information. Initially, the proof-of principle is presented which demonstrates the potential of the novel approach. It is shown that the Raman signal of 15 nm AuNPs coated with dye-modified DNA (dye: carboxytetramethylrhodamine (TAMRA)) is significantly higher for AuNP dimers arranged on a DNA origami platform in comparison to single AuNPs. Furthermore, by attaching single TAMRA molecules in the hot spot between two 5 nm AuNPs and optimizing the size of the AuNPs by electroless gold deposition, SERS experiments at the few-molecule level are presented. The initially used DNA origami-AuNPs design is further optimized in many respects. On the one hand, larger AuNPs up to a diameter of 60 nm are used which are additionally treated with a silver enhancement solution to obtain Au-Ag-core-shell NPs. On the other hand, the arrangement of both AuNPs is altered to improve the position of the dye molecule within the hot spot as well as to decrease the gap size between the two particles. With the optimized design the detection of single dye molecules (TAMRA and cyanine 3 (Cy3)) by means of SERS is demonstrated. Quantitatively, enhancement factors up to 10^10 are estimated which is sufficiently high to detect single dye molecules. In the second part, the influence of graphene as an additional component of the SERS substrate is investigated. Graphene is a two-dimensional material with an outstanding combination of electronical, mechanical and optical properties. Here, it is demonstrated that single layer graphene (SLG) replicates the shape of underlying non-modified DNA origami substrates very well, which enables the monitoring of structural alterations by AFM imaging. In this way, it is shown that graphene encapsulation significantly increases the structural stability of bare DNA origami substrates towards mechanical force and prolonged exposure to deionized water. Furthermore, SLG is used to cover DNA origami substrates which are functionalized with a 40 nm AuNP dimer. In this way, a novel kind of hybrid material is created which exhibits several advantages compared to the analogue non-covered SERS substrates. First, the fluorescence background of dye molecules that are located in between the AuNP surface and SLG is efficiently reduced. Second, the photobleaching rate of the incorporated dye molecules is decreased up to one order of magnitude. Third, due to the increased photostability of the investigated dye molecules, the performance of polarization-dependent series measurements on individual structures is enabled. This in turn reveals extensive information about the dye molecules in the hot spot as well as about the strain induced within the graphene lattice. Although SLG can significantly influence the SERS substrate in the aforementioned ways, all those effects are strongly related to the extent of contact with the underlying AuNP dimer. N2 - Desoxyribonukleinsäure (engl. deoxyribonucleic acid (DNA)) ist nicht nur Träger der Erbinformation, sondern wird auch seit den frühen 80er Jahren als Gerüstmaterial in der Nanotechnologie verwendet. Im Jahr 2006 wurde die bis dato entwickelte DNA-Nanotechnologie durch die Erfindung der sogenannten DNA Origami-Technik weiter revolutioniert. Diese erlaubt die Konstruktion vielfältiger zwei- und dreidimensionaler Strukturen durch gezielte DNA-Selbstassemblierung. Basierend auf der grundlegenden Watson-Crick Basenpaarung innerhalb eines DNA-Doppelstrangs können die gewünschten Zielstrukturen dabei mit hoher Genauigkeit vorhergesagt werden. Neben der Entwicklung vielfältiger DNA-Konstrukte eignen sich DNA Origami-Substrate zudem hervorragend zur Bindung funktionaler Einheiten mit der Präzision im Bereich von Nanometern. Somit lassen sich beispielsweise Goldnanopartikel (AuNPs) präzise anordnen. Dies ist von höchstem Interesse im Zusammenhang mit der oberflächenverstärkten Ramanstreuung (engl. surface-enhanced Raman scattering (SERS)). SERS basiert darauf, die naturgemäß schwache Ramanstreuung eines Analyten um mehrere Größenordnungen zu verstärken, indem der Analyt nahe einer Metalloberfläche positioniert wird. Die Verstärkung der Ramanstreuung beruht hierbei hauptsächlich auf der Wechselwirkung des Analyten mit dem elektromagnetischen Feld der Metalloberfläche und kann im Zwischenraum zweier benachbarter Metallstrukturen besonders stark ausgeprägt sein. Die vorliegende kumulative Dissertation beschäftigt sich mit der Entwicklung einer DNA Origami-basierten Sensoroberfläche für die Anwendung von SERS-Experimenten. Hierbei werden jeweils zwei AuNPs in gezieltem Abstand an ein DNA Origami-Substrat gebunden und das verstärkte Ramansignal eines Analyten im Zwischenraum des AuNP-Dimers detektiert. Zunächst wird das allgemeine Prinzip in Form eines Wirksamkeitsnachweises vorgestellt, in welchem der Farbstoff Carboxytetramethylrhodamin (TAMRA) als Analyt verwendet wird. Die darauf aufbauenden Experimente zielen auf eine Verringerung der Nachweisgrenze bis hin zur Einzelmoleküldetektion ab. Im Zuge dessen werden vielseitige Optimierungsschritte durchgeführt, die die Größe, die Anordnung sowie die Ummantelung der AuNPs mit einer dünnen Silberschicht betreffen. Es wird gezeigt, dass durch die Optimierung aller Parameter die Detektion einzelner TAMRA- und Cyanin 3 (Cy3)-Moleküle mittels SERS möglich ist. Weiterhin wird Graphen, ein erst im Jahr 2004 entdecktes Material bestehend aus einer einzigen Schicht Kohlenstoffatome, als weiterer Bestandteil der untersuchten Nanostrukturen eingeführt. Graphen zeichnet sich durch eine bislang einzigartige Kombination aus optischen, elektronischen und mechanischen Eigenschaften aus und hat sich daher innerhalb kürzester Zeit zu einem vielfältigen Forschungsschwerpunkt entwickelt. In der vorliegenden Dissertation wird zunächst die erhöhte strukturelle Stabilität von Graphen bedeckten DNA Origami-Substraten im Hinblick auf mechanische Beanspruchung sowie auf die Inkubation in deionisiertem Wasser demonstriert. In weiterführenden Betrachtungen werden auch DNA Origami-Substrate, die mit AuNP-Dimeren funktionalisiert sind, mit Graphen bedeckt, und somit eine neuartige Hybridstruktur erzeugt. Es wird gezeigt, dass Graphen den Fluoreszenzuntergrund der untersuchten Farbstoffmoleküle deutlich reduziert und zusätzlich deren Photostabilität gegenüber der eintreffenden Laserstrahlung effektiv verbessert. KW - DNA origami KW - surface-enhanced Raman scattering KW - DNA nanostructures KW - graphene KW - single-molecule detection KW - DNA Origami KW - oberflächenverstärkte Raman-Streuung KW - DNA Nanostrukturen KW - Graphen KW - Einzelmoleküldetektion Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-104089 ER - TY - GEN A1 - Prinz, Julia A1 - Heck, Christian A1 - Ellerik, Lisa A1 - Merk, Virginia A1 - Bald, Ilko T1 - DNA origami based Au–Ag-core–shell nanoparticle dimers with single-molecule SERS sensitivity N2 - DNA origami nanostructures are a versatile tool to arrange metal nanostructures and other chemical entities with nanometer precision. In this way gold nanoparticle dimers with defined distance can be constructed, which can be exploited as novel substrates for surface enhanced Raman scattering (SERS). We have optimized the size, composition and arrangement of Au/Ag nanoparticles to create intense SERS hot spots, with Raman enhancement up to 1010, which is sufficient to detect single molecules by Raman scattering. This is demonstrated using single dye molecules (TAMRA and Cy3) placed into the center of the nanoparticle dimers. In conjunction with the DNA origami nanostructures novel SERS substrates are created, which can in the future be applied to the SERS analysis of more complex biomolecular targets, whose position and conformation within the SERS hot spot can be precisely controlled. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 221 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89714 SP - 5612 EP - 5620 ER - TY - THES A1 - Prüfert, Christian T1 - Laser ablation and matter sizing BT - a focused view on molecules, sub-micron particles, and aerosols N2 - The doctoral thesis presented provides a comprehensive view of laser-based ablation techniques promoted to new fields of operation, including, but not limited to, size, composition, and concentration analyses. It covers various applications of laser ablation techniques over a wide range of sizes, from single molecules all the way to aerosol particles. The research for this thesis started with broadening and deepening the field of application and the fundamental understanding of liquid-phase IR-MALDI. Here, the hybridization of ion mobility spectrometry and microfluidics was realized by using IR-MALDI as the coupling technique for the first time. The setup was used for monitoring the photocatalytic performance of the E-Z isomerization of olefins. Using this hybrid, measurement times were so drastically reduced that such photocatalyst screenings became a matter of minutes rather than hours. With this on hand, triple measurements screenings could not only be performed within ten minutes, but also with a minimum amount of resources highlighting its potential as a green chemistry alternative to batch-sized reactions. Along the optimizing process of the IR-MALDI source for microfluidics came its application for another liquid sample supply method, the hanging drop. This demarcated one of the first applications of IR-MALDI for the charging of sub-micron particles directly from suspensions via their gas-phase transfer, followed by their characterization with differential mobility analysis. Given the high spectral quality of the data up to octuply charged particles became experimentally accessible, this laid the foundation for deriving a new charge distribution model for IR-MALDI in that size regime. Moving on to even larger analyte sizes, LIBS and LII were employed as ablation techniques for the solid phase, namely the aerosol particles themselves. Both techniques produce light-emitting events and were used to quantify and classify different aerosols. The unique configuration of stroboscopic imaging, photoacoustics, LII, and LIBS measurements opened new realms for analytical synergies and their potential application in industry. The concept of using low fluences, below 100 J/cm2, and high repetition rates of up to 500 Hz for LIBS makes for an excellent phase-selective LIBS setup. This concept was combined with a new approach to the photoacoustic normalization of LIBS. Also, it was possible to acquire statistically relevant amounts of data in a matter of seconds, showing its potential as a real-time optimization technique. On the same time axis, but at much lower fluences, LII was used with a similar methodology to quickly quantify and classify airborne particles of different compositions. For the first time, aerosol particles were evaluated on their LII susceptibility by using a fluence screening approach. N2 - Die vorliegende kumulative Dissertation hat die lasergestützte Flüssig- und Festphasen-Ablation (Ab- tragung) zur Molekül- und Partikelanalyse zur Grundlage. Mittels Infrarotstrahlung wurden die Analyten, vom molekularen bis zum Mikrometergröÿenbereich, in die Gasphase überführt, ionisiert oder geladen und anschließend durch spektrometrische beziehungsweise spektroskopische Analysemethoden identifiziert und quantifiziert. Eingangs wurden IR-MALDIs (infrared laser-assisted matrix dispersion ionization) Anwendungsbereiche als Kopplungsmethode etabliert sowie fundamentale Aspekte des Ionisationsprozesses innerhalb der IR-MALDI beleuchtet. Die als Kopplungsmethode eingesetzte IR-MALDI ermöglichte die erstmalige Zusammenführung eines Mikrochip-Reaktors mit einem Niederdruck-Ionenmobilitätsspektrometer. Dies geschah über die IR-MALDI eines vom Mikrochip ejektierten Flüssigkeitsmikrostrahls und wurde für die Verlaufsbeoachtung photokatalysierter Isomerisierungsreaktionen verwendet. Dieses hybride Konzept aus Mikrochip-Reaktor und Niederdruck-Ionenmobilitätsspektrometer hatte eine erhebliche Reduktion der benötigten Messzeit zur Folge. Die Messzeit konnte, im Vergleich zur mehrstündigen Verlaufsbeobachtung von Reaktionen im Kolben, auf nur wenige Minuten verringert werden. Hiermit war es nun also nicht nur möglich Dreifachmessungen innerhalb von nur zehn Minuten auszuführen, sondern es wurde auch nur ein kleinster Bruchteil der sonst üblichen Rohstoffe benötigt, was wiederum zeigt, welches Potential diese systemische Miniaturisierung für nachhaltige Chemie hat. Entlang der Entwicklung dieser Flüssigkeitsstrahlkopplung konnte IR-MALDI auch auf einen Aufbau mit hängendem Tropfen übertragen werden. Hierdurch kam es zu einer der ersten Gasphasenanalysen von Submikron-Partikeln direkt aus einer Suspension heraus. Nachdem diese durch IR-MALDI mit entsprechender Ladung versehen wurden, konnten sie mittels differentieller Mobilitätsanalyse charakterisiert werden. Durch die hohe spektrale Auflösung der Methode war eine eindeutige Zuordnung von bis zu acht Ladungen auf einem Partikel möglich. Folglich lieferte dies die Grundlage zur Evaluierung bestehender IR-MALDI-Ladungsverteilungsmodelle und schlussendlich zur Entwicklung eines neuen Ladungsverteilungsmodels. Anschließend wurde die Ablation auf noch größere Partikel, auf denen die Ablation direkt und damit in der festen Phase stattfinden konnte, übertragen. Hierbei fanden LIBS (laser-induced break-down spectroscopy) und LII (laser-induced incandescence) ihre Anwendung in der Aerosolquantifizierung sowie in deren Identifizierung beziehungsweise Klassierung. Die vielschichtige Methodenkonfiguration bestehend aus Stroboskopie, Photoakustik, LII und LIBS eröffnete neue Dimensionen für analytische Synergien. In diesem Zusammenhang wurde ein neuer Ansatz zur photoakustischen Normierung von Einzelsignalen in der LIBS entwickelt. Als weiteres Alleinstellungsmerkmal wurde LIBS mit niedrigen Fluenzen (Energie pro Fläche) von unter 100 J/cm2, somit also phasenselektiv, und hohen Wiederholungsraten von bis zu 500 Hz verwendet. Somit konnte innerhalb von Sekunden eine statistisch relevante Menge an Daten erhoben werden, nahezu in Echtzeit, was wiederum Anwendungspotentiale in Industrieprozessen aufzeigt. Auf derselben Zeitskala, jedoch bei deutlich geringeren Fluenzen (<1.5 J/cm2), wurde auch die LII für Partikelzählung verwendet. Hierbei wurde erstmals das Potential der LII zur Klassierung von Partikeln im Rahmen eines Fluenz-Screenings gezeigt. KW - Ion mobility spectrometry (IMS) KW - Infrared matrix-assisted laser desorption ionization (IR-MALDI) KW - Differential mobility analysis (DMA) KW - laser-induced breakdown spectroscopy (LIBS) KW - laser-induced incandescence (LII) KW - Differentielle Mobilitätsanalyse (DMA) KW - Matrix-unterstützte Laser-Desorption/Ionisation (IR-MALDI) KW - Ionenmobilitätsspektrometry (IMS) KW - Laserinduzierte Plasmaspektroskopie (LIBS) KW - Laserinduzierte Inkandeszenz (LII) Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-559745 ER - TY - THES A1 - Qin, Qing T1 - Chemical functionalization of porous carbon-based materials to enable novel modes for efficient electrochemical N2 fixation T1 - Chemische Funktionalisierung von porösen Materialien auf Kohlenstoffbasis zur Ermöglichung neuartiger Verfahren für eine effiziente elektrochemische N2-Fixierung N2 - The central motivation of the thesis was to provide possible solutions and concepts to improve the performance (e.g. activity and selectivity) of electrochemical N2 reduction reaction (NRR). Given that porous carbon-based materials usually exhibit a broad range of structural properties, they could be promising NRR catalysts. Therefore, the advanced design of novel porous carbon-based materials and the investigation of their application in electrocatalytic NRR including the particular reaction mechanisms are the most crucial points to be addressed. In this regard, three main topics were investigated. All of them are related to the functionalization of porous carbon for electrochemical NRR or other electrocatalytic reactions. In chapter 3, a novel C-TixOy/C nanocomposite has been described that has been obtained via simple pyrolysis of MIL-125(Ti). A novel mode for N2 activation is achieved by doping carbon atoms from nearby porous carbon into the anion lattice of TixOy. By comparing the NRR performance of M-Ts and by carrying out DFT calculations, it is found that the existence of (O-)Ti-C bonds in C-doped TixOy can largely improve the ability to activate and reduce N2 as compared to unoccupied OVs in TiO2. The strategy of rationally doping heteroatoms into the anion lattice of transition metal oxides to create active centers may open many new opportunities beyond the use of noble metal-based catalysts also for other reactions that require the activation of small molecules as well. In chapter 4, a novel catalyst construction composed of Au single atoms decorated on the surface of NDPCs was reported. The introduction of Au single atoms leads to active reaction sites, which are stabilized by the N species present in NDPCs. Thus, the interaction within as-prepared AuSAs-NDPCs catalysts enabled promising performance for electrochemical NRR. For the reaction mechanism, Au single sites and N or C species can act as Frustrated Lewis pairs (FLPs) to enhance the electron donation and back-donation process to activate N2 molecules. This work provides new opportunities for catalyst design in order to achieve efficient N2 fixation at ambient conditions by utilizing recycled electric energy. The last topic described in chapter 5 mainly focused on the synthesis of dual heteroatom-doped porous carbon from simple precursors. The introduction of N and B heteroatoms leads to the construction of N-B motives and Frustrated Lewis pairs in a microporous architecture which is also rich in point defects. This can improve the strength of adsorption of different reactants (N2 and HMF) and thus their activation. As a result, BNC-2 exhibits a desirable electrochemical NRR and HMF oxidation performance. Gas adsorption experiments have been used as a simple tool to elucidate the relationship between the structure and catalytic activity. This work provides novel and deep insights into the rational design and the origin of activity in metal-free electrocatalysts and enables a physically viable discussion of the active motives, as well as the search for their further applications. Throughout this thesis, the ubiquitous problems of low selectivity and activity of electrochemical NRR are tackled by designing porous carbon-based catalysts with high efficiency and exploring their catalytic mechanisms. The structure-performance relationships and mechanisms of activation of the relatively inert N2 molecules are revealed by either experimental results or DFT calculations. These fundamental understandings pave way for a future optimal design and targeted promotion of NRR catalysts with porous carbon-based structure, as well as study of new N2 activation modes. N2 - Die zentrale Motivation der Arbeit war es, mögliche Lösungen und Konzepte zur Verbesserung der Leistung (z.B. Aktivität und Selektivität) der elektrochemischen N2-Reduktionsreaktion (NRR) anzubieten. Da poröse Materialien auf Kohlenstoffbasis in der Regel ein breites Spektrum an strukturellen Eigenschaften aufweisen, könnten sie vielversprechende NRR-Katalysatoren sein. Daher sind das fortgeschrittene Design neuartiger poröser Materialien auf Kohlenstoffbasis und die Untersuchung ihrer Anwendung in der elektrokatalytischen NRR einschließlich der besonderen Reaktionsmechanismen die wichtigsten Punkte, die angegangen werden müssen. In diesem Zusammenhang wurden drei Hauptthemen untersucht. Alle von ihnen stehen im Zusammenhang mit der Funktionalisierung von porösem Kohlenstoff für elektrochemische NRR oder andere elektrokatalytische Reaktionen. In Kapitel 3 wurde ein neuartiger C-TixOy/C-Nanokomposit beschrieben, der durch einfache Pyrolyse von MIL-125(Ti) gewonnen wurde. Ein neuartiger Modus für die N2-Aktivierung wird durch Dotierung von Kohlenstoffatomen aus nahegelegenem porösem Kohlenstoff in das Aniongitter von TixOy erreicht. Durch den Vergleich der NRR-Leistung von M-Ts und die Durchführung von DFT-Berechnungen wird festgestellt, dass die Existenz von (O-)Ti-C-Bindungen in C-dotiertem TixOy die Fähigkeit zur Aktivierung und Reduktion von N2 im Vergleich zu unbesetzten OVs in TiO2 erheblich verbessern kann. Die Strategie, Heteroatome rational in das Aniongitter von Übergangsmetalloxiden zu dotieren, um aktive Zentren zu schaffen, kann viele neue Möglichkeiten eröffnen, die über den Einsatz von edelmetallbasierten Katalysatoren hinausgehen, auch für andere Reaktionen, die ebenfalls die Aktivierung von kleinen Molekülen erfordern. In Kapitel 4 wurde über eine neuartige Katalysatorkonstruktion aus Au-Einzelatomen berichtet, die auf der Oberfläche von NDPCs dekoriert sind. Die Einführung von Au-Einzelatomen führt zu aktiven Reaktionsstellen, die durch die in NDPCs vorhandenen N-Spezies stabilisiert werden. So ermöglichte die Interaktion innerhalb von hergestellten AuSAs-NDPCs-Katalysatoren eine vielversprechende Leistung für die elektrochemische NRR. Für den Reaktionsmechanismus können Au-Einzelstandorte und N- oder C-Spezies als frustrierte Lewis-Paare (FLPs) fungieren, um den Elektronenabgabe- und Rückgabeprozess zur Aktivierung von N2-Molekülen zu verbessern. Diese Arbeit bietet neue Möglichkeiten für das Design von Katalysatoren, um eine effiziente N2-Fixierung unter Umgebungsbedingungen durch die Nutzung recycelter elektrischer Energie zu erreichen. Das letzte in Kapitel 5 beschriebene Thema konzentrierte sich hauptsächlich auf die Synthese von dualem heteroatomdotiertem porösem Kohlenstoff aus einfachen Vorläufern. Die Einführung von N- und B-Heteroatomen führt zur Konstruktion von N-B-Motiven und frustrierten Lewis-Paaren in einer mikroporösen Architektur, die ebenfalls reich an Punktdefekten ist. Dies kann die Adsorptionskraft verschiedener Reaktanden (N2 und HMF) und damit deren Aktivierung verbessern. Infolgedessen weist BNC-2 eine wünschenswerte elektrochemische NRR- und HMF-Oxidationsleistung auf. Gasadsorptionsexperimente wurden als einfaches Werkzeug zur Aufklärung des Zusammenhangs zwischen Struktur und katalytischer Aktivität eingesetzt. Diese Arbeit liefert neue und tiefe Einblicke in das rationale Design und den Ursprung der Aktivität bei metallfreien Elektrokatalysatoren und ermöglicht eine physikalisch tragfähige Diskussion der aktiven Motive, sowie die Suche nach deren weiteren Anwendungen. Während dieser Arbeit, die allgegenwärtigen Probleme der niedrigen Selektivität und Aktivität der elektrochemischen NRR werden durch die Gestaltung poröser Katalysatoren auf Kohlenstoffbasis mit hoher Effizienz und die Erforschung ihrer katalytischen Mechanismen. Die Struktur-Leistungsbeziehungen und Aktivierungsmechanismen der relativ inerten N2-Moleküle werden entweder durch experimentelle Ergebnisse oder DFT-Berechnungen aufgezeigt. Diese grundlegenden Erkenntnisse ebnen den Weg für ein zukünftiges optimales Design und eine gezielte Förderung von NRR-Katalysatoren mit poröser Kohlenstoffstruktur, sowie für die Untersuchung neuer N2-Aktivierungsmodi. KW - N2 fixation KW - porous carbon-based materials KW - ammonia KW - selectivity KW - N2-Fixierung KW - porösen Materialien auf Kohlenstoffbasis KW - Ammoniak KW - Selektivität Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-443397 ER - TY - GEN A1 - Raju, Rajarshi Roy A1 - Koetz, Joachim T1 - Inner Rotation of Pickering Janus Emulsions T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Janus droplets were prepared by vortex mixing of three non-mixable liquids, i.e., olive oil, silicone oil and water, in the presence of gold nanoparticles (AuNPs) in the aqueous phase and magnetite nanoparticles (MNPs) in the olive oil. The resulting Pickering emulsions were stabilized by a red-colored AuNP layer at the olive oil/water interface and MNPs at the oil/oil interface. The core–shell droplets can be stimulated by an external magnetic field. Surprisingly, an inner rotation of the silicon droplet is observed when MNPs are fixed at the inner silicon droplet interface. This is the first example of a controlled movement of the inner parts of complex double emulsions by magnetic manipulation via interfacially confined magnetic nanoparticles. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1249 KW - Janus droplets KW - Pickering emulsions KW - magnetic manipulation KW - gold nanoparticles KW - magnetite nanoparticles Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553628 SN - 1866-8372 IS - 1249 ER - TY - GEN A1 - Raju, Rajarshi Roy A1 - Liebig, Ferenc A1 - Hess, Andreas A1 - Schlaad, Helmut A1 - Koetz, Joachim T1 - Temperature-triggered reversible breakdown of polymer-stabilized olive BT - silicone oil Janus emulsions T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - A one-step moderate energy vibrational emulsification method was successfully employed to produce thermo-responsive olive/silicone-based Janus emulsions stabilized by poly(N,N-diethylacrylamide) carrying 0.7 mol% oleoyl side chains. Completely engulfed emulsion droplets remained stable at room temperature and could be destabilized on demand upon heating to the transition temperature of the polymeric stabilizer. Time-dependent light micrographs demonstrate the temperature-induced breakdown of the Janus droplets, which opens new aspects of application, for instance in biocatalysis. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 751 KW - microgels KW - step Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-436461 SN - 1866-8372 IS - 751 SP - 19271 EP - 19277 ER - TY - THES A1 - Ramírez Ríos, Liliana Patricia T1 - Superpara- and paramagnetic polymer colloids by miniemulsion processes N2 - Polymerverkapselte magnetische Nanopartikel versprechen, in der Zukunft sehr erfolgreich bei Anwendungen in der Biologie und der Medizin eingesetzt werden zu können z. B. in der Krebstherapie und als Kontrastmittel bei der magnetischen Kernspinresonanztomographie. Diese Arbeit zeigt, dass durch die interdisziplinäre Kombination verschiedener Techniken Herstellungsverfahren und Eigenschaften solcher Partikel verbessert werden können. Unter Miniemulsionen versteht man wässrige Dispersionen relativ stabiler Öltröpfchen, zwischen 30 und 50 nm Größe. Ein Nanometer (nm) ist der 1.000.000.000ste Teil eines Meters. Ein Haar ist ungefähr 60.000 Nanometer breit. Hergestellt werden Miniemulsionen durch Scherung eines Systems bestehend aus Öl, Wasser, Tensid (Seife) und einer weiteren Komponente, dem Hydrophob, das die Tröpfchen stabilisieren soll. Die Polymerisation von Miniemulsionen ermöglicht die Verkapselung anorganischer Materialen z. B. magnetischer Teilchen oder Gadolinium-haltiger Komponenten. Zu Optimierung des Verkapselung, ist es notwendig, die richtige Menge eines geeigneten Tensids zu finden. Die magnetischen polymerverkapselten Nanopartikel, die in einer wässrigen Trägerflüssigkeit dispergiert sind, zeigen in Abhängigkeit von Partikelgröße, Zusammensetzung, elektronischer Beschaffenheit, etc. ein sogenanntes superpara- oder paramagnetisches Verhalten. Superpara- oder paramagnetisches Verhalten bedeutet, dass die Flüssigkeiten in Anwesenheit äußerer Magnetfeldern ihre Fließfähigkeit beibehalten. Wenn das Magnetfeld entfernt wird, haben sie keine Erinnerung mehr daran, unter dem Einfluss eines Magnetfeldes gestanden zu haben, d. h., dass sie nach Abschalten des Magnetfeldes selbst nicht mehr magnetisch sind. Die Vorteile des Miniemulsionsverfahrens sind der hohe Gehalt und die homogene Verteilung magnetischer Teilchen in den einzelnen Nanopartikeln. Außerdem ermöglicht dieses Verfahren nanostrukturierte Kompositpartikel herzustellen, wie z. B polymerverkapselte Nanopartikel mit Nanoschichten bestehend aus magnetischen Molekülen. N2 - Combining the magnetic properties of a given material with the tremendous advantages of colloids can exponentially increase the advantages of both systems. This thesis deals with the field of magnetic nanotechnology. Thus, the design and characterization of new magnetic colloids with fascinating properties compared with the bulk materials is presented. Ferrofluids are referred to either as water or organic stable dispersions of superparamagnetic nanoparticles which respond to the application of an external magnetic field but lose their magnetization in the absence of a magnetic field. In the first part of this thesis, a three-step synthesis for the fabrication of a novel water-based ferrofluid is presented. The encapsulation of high amounts of magnetite into polystyrene particles can efficiently be achieved by a new process including two miniemulsion processes. The ferrofluids consist of novel magnetite polystyrene nanoparticles dispersed in water which are obtained by three-step process including coprecipitation of magnetite, its hydrophobization and further surfactant coating to enable the redispersion in water and the posterior encapsulation into polystyrene by miniemulsion polymerization. It is a desire to take advantage of a potential thermodynamic control for the design of nanoparticles, and the concept of "nanoreactors" where the essential ingredients for the formation of the nanoparticles are already in the beginning. The formulation and application of polymer particles and hybrid particles composed of polymeric and magnetic material is of high interest for biomedical applications. Ferrofluids can for instance be used in medicine for cancer therapy and magnetic resonance imaging. Superparamagnetic or paramagnetic colloids containing iron or gadolinium are also used as magnetic resonance imaging contrast agent, for example as a important tool in the diagnosis of cancer, since they enhance the relaxation of the water of the neighbouring zones. New nanostructured composites by the thermal decomposition of iron pentacarbonyl in the monomer phase and thereafter the formation of paramagnetic nanocomposites by miniemulsion polymerization are discussed in the second part of this thesis. In order to obtain the confined paramagnetic nanocomposites a two-step process was used. In the first step, the thermal decomposition of the iron pentacarbonyl was obtained in the monomer phase using oleic acid as stabilizer. In the second step, this iron-containing monomer dispersion was used for making a miniemulsion polymerization thereof. The addition of lanthanide complexes to ester-containing monomers such as butyl acrylate and subsequent polymerization leading to the spontaneous formation of highly organized layered nanocomposites is presented in the final part of this thesis. By an one-step miniemulsion process, the formation of a lamellar structure within the polymer nanoparticles is achieved. The magnetization and the NMR relaxation measurements have shown these new layered nanocomposites to be very apt for application as contrast agent in magnetic resonance imaging. T2 - Superpara- and paramagnetic polymer colloids by miniemulsion processes KW - Magnetisch KW - superparamagnetisch KW - paramagnetisch KW - Kolloid KW - Miniemulsion KW - Polymerisation KW - Ferrofluid KW - Überstrukturierte Komposite KW - Gadolinium KW - Lanthano KW - Magnetic KW - superparamagnetic KW - paramagnetic KW - colloid KW - miniemulsion KW - polymerization KW - ferrofluid KW - nanostructured composite KW - gadolinium KW - lanthanide Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001267 ER - TY - GEN A1 - Rasovic, Aleksandar A1 - Blagojevic, Vladimir A1 - Baranac-Stojanovic, Marija A1 - Kleinpeter, Erich A1 - Markovic, Rade A1 - Minic, Dragica M. T1 - Quantification of the push–pull effect in 2-alkylidene-4-oxothiazolidines by using NMR spectral data and barriers to rotation around the C=C bond N2 - Information about the strength of donor–acceptor interactions in push–pull alkenes is valuable, as this so-called “push–pull effect” influences their chemical reactivity and dynamic behaviour. In this paper, we discuss the applicability of NMR spectral data and barriers to rotation around the C[double bond, length as m-dash]C double bond to quantify the push–pull effect in biologically important 2-alkylidene-4-oxothiazolidines. While olefinic proton chemical shifts and differences in 13C NMR chemical shifts of the two carbons constituting the C[double bond, length as m-dash]C double bond fail to give the correct trend in the electron withdrawing ability of the substituents attached to the exocyclic carbon of the double bond, barriers to rotation prove to be a reliable quantity in providing information about the extent of donor–acceptor interactions in the push–pull systems studied. In particular all relevant kinetic data, that is the Arrhenius parameters (apparent activation energy Ea and frequency factor A) and activation parameters (ΔS‡, ΔH‡ and ΔG‡), were determined from the data of the experimentally studied configurational isomerization of (E)-9a. These results were compared to previously published related data for other two compounds, (Z)-1b and (2E,5Z)-7, showing that experimentally determined ΔG‡ values are a good indicator of the strength of push–pull character. Theoretical calculations of the rotational barriers of eight selected derivatives excellently correlate with the calculated C[double bond, length as m-dash]C bond lengths and corroborate the applicability of ΔG‡ for estimation of the strength of the push–pull effect in these and related systems. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 322 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394523 SP - 6364 EP - 6373 ER - TY - GEN A1 - Rausch, Ann-Kristin A1 - Brockmeyer, Robert A1 - Schwerdtle, Tanja T1 - Development, validation, and application of a multi-method for the determination of mycotoxins, plant growth regulators, tropane alkaloids, and pesticides in cereals by two-dimensional liquid chromatography tandem mass spectrometry T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Mycotoxins and pesticides regularly co-occur in agricultural products worldwide. Thus, humans can be exposed to both toxic contaminants and pesticides simultaneously, and multi-methods assessing the occurrence of various food contaminants and residues in a single method are necessary. A two-dimensional high performance liquid chromatography tandem mass spectrometry method for the analysis of 40 (modified) mycotoxins, two plant growth regulators, two tropane alkaloids, and 334 pesticides in cereals was developed. After an acetonitrile/water/formic acid (79:20:1, v/v/v) multi-analyte extraction procedure, extracts were injected into the two-dimensional setup, and an online clean-up was performed. The method was validated according to Commission Decision (EC) no. 657/2002 and document N° SANTE/12682/2019. Good linearity (R2 > 0.96), recovery data between 70-120%, repeatability and reproducibility values < 20%, and expanded measurement uncertainties < 50% were obtained for a wide range of analytes, including very polar substances like deoxynivalenol-3-glucoside and methamidophos. However, results for fumonisins, zearalenone-14,16-disulfate, acid-labile pesticides, and carbamates were unsatisfying. Limits of quantification meeting maximum (residue) limits were achieved for most analytes. Matrix effects varied highly (−85 to +1574%) and were mainly observed for analytes eluting in the first dimension and early-eluting analytes in the second dimension. The application of the method demonstrated the co-occurrence of different types of cereals with 28 toxins and pesticides. Overall, 86% of the samples showed positive findings with at least one mycotoxin, plant growth regulator, or pesticide. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1365 KW - 2D-LC-MS/MS KW - Multi-method KW - Mycotoxins KW - Modified mycotoxins KW - Pesticides KW - Cereals Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-514795 SN - 1866-8372 IS - 143 ER - TY - GEN A1 - Reich, Oliver A1 - Löhmannsröben, Hans-Gerd A1 - Schael, Frank T1 - Optical sensing with photon density waves: investigation of model media N2 - Investigations with frequency domain photon density waves allow elucidation of absorption and scattering properties of turbid media. The temporal and spatial propagation of intensity modulated light with frequencies up to more than 1 GHz can be described by the P1 approximation to the Boltzmann transport equation. In this study, we establish requirements for the appropriate choice of turbid model media and characterize mixtures of isosulfan blue as absorber and polystyrene beads as scatterer. For these model media, the independent determination of absorption and reduced scattering coefficients over large absorber and scatterer concentration ranges is demonstrated with a frequency domain photon density wave spectrometer employing intensity and phase measurements at various modulation frequencies. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 026 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13147 ER - TY - GEN A1 - Rethfeldt, Nina A1 - Brinkmann, Pia A1 - Riebe, Daniel A1 - Beitz, Toralf A1 - Köllner, Nicole A1 - Altenberger, Uwe A1 - Löhmannsröben, Hans-Gerd T1 - Detection of Rare Earth Elements in Minerals and Soils by Laser-Induced Breakdown Spectroscopy (LIBS) Using Interval PLS T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The numerous applications of rare earth elements (REE) has lead to a growing global demand and to the search for new REE deposits. One promising technique for exploration of these deposits is laser-induced breakdown spectroscopy (LIBS). Among a number of advantages of the technique is the possibility to perform on-site measurements without sample preparation. Since the exploration of a deposit is based on the analysis of various geological compartments of the surrounding area, REE-bearing rock and soil samples were analyzed in this work. The field samples are from three European REE deposits in Sweden and Norway. The focus is on the REE cerium, lanthanum, neodymium and yttrium. Two different approaches of data analysis were used for the evaluation. The first approach is univariate regression (UVR). While this approach was successful for the analysis of synthetic REE samples, the quantitative analysis of field samples from different sites was influenced by matrix effects. Principal component analysis (PCA) can be used to determine the origin of the samples from the three deposits. The second approach is based on multivariate regression methods, in particular interval PLS (iPLS) regression. In comparison to UVR, this method is better suited for the determination of REE contents in heterogeneous field samples. View Full-Text T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1254 KW - LIBS KW - rare earth elements KW - minerals KW - PCA KW - iPLS regression Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-557469 SN - 1866-8372 SP - 1 EP - 17 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Riebe, Daniel T1 - Experimental and theoretical investigations of molecular ions by spectroscopy as well as ion mobility and mass spectrometry T1 - Experimentelle und theoretische Untersuchungen molekularer Ionen durch Spektroskopie sowie Ionenmobilitäts- und Massenspektrometrie N2 - The aim of this thesis was the elucidation of different ionization methods (resonance-enhanced multiphoton ionization – REMPI, electrospray ionization – ESI, atmospheric pressure chemical ionization – APCI) in ion mobility (IM) spectrometry. In order to gain a better understanding of the ionization processes, several spectroscopic, mass spectrometric and theoretical methods were also used. Another focus was the development of experimental techniques, including a high resolution spectrograph and various combinations of IM and mass spectrometry. The novel high resolution 2D spectrograph facilitates spectroscopic resolutions in the range of commercial echelle spectrographs. The lowest full width at half maximum of a peak achieved was 25 pm. The 2D spectrograph is based on the wavelength separation of light by the combination of a prism and a grating in one dimension, and an etalon in the second dimension. This instrument was successfully employed for the acquisition of Raman and laser-induced breakdown spectra. Different spectroscopic methods (light scattering and fluorescence spectroscopy) permitting a spatial as well as spectral resolution, were used to investigate the release of ions in the electrospray. The investigation is based on the 50 nm shift of the fluorescence band of rhodamine 6G ions of during the transfer from the electrospray droplets to the gas phase. A newly developed ionization chamber operating at reduced pressure (0.5 mbar) was coupled to a time-of-flight mass spectrometer. After REMPI of H2S, an ionization chemistry analogous to H2O was observed with this instrument. Besides H2S+ and its fragments, H3S+ and protonated analyte ions could be observed as a result of proton-transfer reactions. For the elucidation of the peaks in IM spectra, a combination of IM spectrometer and linear quadrupole ion trap mass spectrometer was developed. The instrument can be equipped with various ionization sources (ESI, REMPI, APCI) and was used for the characterization of the peptide bradykinin and the neuroleptic promazine. The ionization of explosive compounds in an APCI source based on soft x-radiation was investigated in a newly developed ionization chamber attached to the ion trap mass spectrometer. The major primary and secondary reactions could be characterized and explosive compound ions could be identified and assigned to the peaks in IM spectra. The assignment is based on the comparison of experimentally determined and calculated IM. The methods of calculation currently available exhibit large deviations, especially in the case of anions. Therefore, on the basis of an assessment of available methods, a novel hybrid method was developed and characterized. N2 - Ziel dieser Arbeit war die Aufklärung unterschiedlicher Ionisationsmethoden (Resonanz-verstärkte Mehrphotonenionisation – REMPI, Elektrosprayionisation – ESI, chemische Ionisation bei Atmosphärendruck – APCI) in der Ionenmobilitäts (IM)-Spektrometrie. Um ein besseres Verständnis der Ionisationsprozesse zu erhalten, wurden zusätzlich ver¬schiedene spektroskopische, massenspektrometrische und theoretische Methoden eingesetzt. Ein weiterer Schwerpunkt war die Entwicklung neuer experimenteller Techniken, darunter ein hochauflösender Spektrograph und verschiedene Kombinationen von IM- und Massenspektrometern. Der neuartige, hochauflösende 2D Spektrograph ermöglicht spektroskopische Auflösungen im Bereich kommerzieller Echelle-Spektrographen. Die geringste erreichte Halbwertsbreite eines Peaks betrug 25 pm. Der 2D Spektrograph beruht auf der Wellenlängenseparation von Licht durch eine Kombination aus einem Prisma und einem Gitter in der einen Dimension und einem Etalon in der zweiten Dimension. Das Instrument wurde erfolgreich zur Aufnahme von Raman- und laserinduzierten Plasmaspektren ein¬gesetzt. Verschiedene spektroskopische Methoden (Lichtstreuung und Fluoreszenzspektroskopie), die sowohl eine räumliche, als auch eine spektrale Auflösung erlauben, wurden zur Untersuchung der Freisetzung der Ionen im Elektrospray angewandt. Die Untersuchung beruht auf der Verschiebung der Fluoreszenzbande von Rhodamin 6G-Ionen um 50 nm beim Übergang aus den Elektrospray-Tropfen in die Gasphase. Eine neuent¬wickelte Ionisationskammer bei reduziertem Druck (0,5 mbar) wurde an ein Flugzeit-Massenspektrometer gekoppelt. Darin wurde nach REMPI von H2S eine zum H2O analoge Ionisationschemie beobachtet. Neben H2S+ und seinen Fragmenten wurden als Ergebnis von Proto-nen-Transferreaktionen H3S+ und protonierte Analytionen beobachtet. Zur Aufklärung der Peaks in IM-Spektren wurde eine Kopplung von IM-Spektrometer und linearem Quadrupol-Ionenfallen-Massenspektrometer entwickelt. Die Kopplung kann mit verschiedenen Ionisationsquellen (ESI, REMPI, APCI) ausgestattet werden und wurde zur Charakterisierung des Peptids Bradykinin und des Neuroleptikums Promazin angewendet. Die Ionisation von Sprengstoffen in einer APCI-Quelle, die auf weicher Röntgenstrahlung beruht, wurde in einer neu entwickelten, an das Ionenfallen-Massenspektrometer gekoppelten Ionisationskammer untersucht. Dabei konnten die wichtigsten Primär- und Sekundärreaktionen charakterisiert, sowie Sprengstoffionen identifiziert und den Peaks in den IM-Spektren zugeordnet werden. Diese Zuordnung beruht auf dem Vergleich von experimentell bestimmten und berechneten IM. Da die aktuell verfügbaren Berechnungsmethoden insbesondere für Anionen zu große Abweichungen zu den experimentell bestimmten IM aufweisen, wurde auf Basis der Bewertung verfügbarer Methoden eine neue Hybridmethode entwickelt und charakterisiert. KW - ion mobility spectrometry KW - mass spectrometry KW - explosives KW - X-ray KW - photoionization KW - ion mobility calculations KW - Ionenmobilitätsspektrometrie KW - Massenspektrometrie KW - Sprengstoffe KW - Röntgenstrahlung KW - Photoionisation KW - Ionenmobilitäts-Berechnungen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94632 ER - TY - GEN A1 - Riebe, Daniel A1 - Erler, Alexander A1 - Brinkmann, Pia A1 - Beitz, Toralf A1 - Löhmannsröben, Hans-Gerd A1 - Gebbers, Robin T1 - Comparison of Calibration Approaches in Laser-Induced Breakdown Spectroscopy for Proximal Soil Sensing in Precision Agriculture T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - The lack of soil data, which are relevant, reliable, affordable, immediately available, and sufficiently detailed, is still a significant challenge in precision agriculture. A promising technology for the spatial assessment of the distribution of chemical elements within fields, without sample preparation is laser-induced breakdown spectroscopy (LIBS). Its advantages are contrasted by a strong matrix dependence of the LIBS signal which necessitates careful data evaluation. In this work, different calibration approaches for soil LIBS data are presented. The data were obtained from 139 soil samples collected on two neighboring agricultural fields in a quaternary landscape of northeast Germany with very variable soils. Reference analysis was carried out by inductively coupled plasma optical emission spectroscopy after wet digestion. The major nutrients Ca and Mg and the minor nutrient Fe were investigated. Three calibration strategies were compared. The first method was based on univariate calibration by standard addition using just one soil sample and applying the derived calibration model to the LIBS data of both fields. The second univariate model derived the calibration from the reference analytics of all samples from one field. The prediction is validated by LIBS data of the second field. The third method is a multivariate calibration approach based on partial least squares regression (PLSR). The LIBS spectra of the first field are used for training. Validation was carried out by 20-fold cross-validation using the LIBS data of the first field and independently on the second field data. The second univariate method yielded better calibration and prediction results compared to the first method, since matrix effects were better accounted for. PLSR did not strongly improve the prediction in comparison to the second univariate method. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 786 KW - laser-induced breakdown spectroscopy KW - LIBS KW - proximal soil sensing KW - soil nutrients KW - elemental composition Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-440079 SN - 1866-8372 IS - 786 ER - TY - THES A1 - Robinson, Joshua Wayne T1 - Novel Poly(N-substituted glycine)s : synthesis, post-modification, and physical properties T1 - Neuartige Poly(N-substituierte glycine) : Synthese, polymeranaloge Modifikation und physikalische Eigenschaften N2 - Various synthetic approaches were explored towards the preparation of poly(N-substituted glycine) homo/co-polymers (a.k.a. polypeptoids). In particular, monomers that would facilitate in the preparation of bio-relevant polymers via either chain- or step-growth polymerization were targeted. A 3-step synthetic approach towards N-substituted glycine N-carboxyanhydrides (NNCA) was implemented, or developed, and optimized allowing for an efficient gram scale preparation of the aforementioned monomer (chain-growth). After exploring several solvents and various conditions, a reproducible and efficient ring-opening polymerization (ROP) of NNCAs was developed in benzonitrile (PhCN). However, achieving molecular weights greater than 7 kDa required longer reaction times (>4 weeks) and sub-sequentially allowed for undesirable competing side reactions to occur (eg. zwitterion monomer mechanisms). A bulk-polymerization strategy provided molecular weights up to 11 kDa within 24 hours but suffered from low monomer conversions (ca. 25%). Likewise, a preliminary study towards alcohol promoted ROP of NNCAs suffered from impurities and a suspected alternative activated monomer mechanism (AAMM) providing poor inclusion of the initiator and leading to multi-modal dispersed polymeric systems. The post-modification of poly(N-allyl glycine) via thiol-ene photo-addition was observed to be quantitative, with the utilization of photo-initiators, and facilitated in the first glyco-peptoid prepared under environmentally benign conditions. Furthermore, poly(N-allyl glycine) demonstrated thermo-responsive behavior and could be prepared as a semi-crystalline bio-relevant polymer from solution (ie. annealing). Initial efforts in preparing these polymers via standard poly-condensation protocols were insufficient (step-growth). However, a thermally induced side-product, diallyl diketopiperazine (DKP), afforded the opportunity to explore photo-induced thiol-ene and acyclic diene metathesis (ADMET) polymerizations. Thiol-ene polymerization readily led to low molecular weight polymers (<2.5 kDa), that were insoluble in most solvents except heated amide solvents (ie. DMF), whereas ADMET polymerization, with diallyl DKP, was unsuccessful due to a suspected 6 member complexation/deactivation state of the catalyst. This understanding prompted the preparation of elongated DKPs most notably dibutenyl DKP. SEC data supports the aforementioned understanding but requires further optimization studies in both the preparation of the DKP monomers and following ADMET polymerization. This work was supported by NMR, GC-MS, FT-IR, SEC-IR, and MALDI-Tof MS characterization. Polymer properties were measured by UV-Vis, TGA, and DSC. N2 - Die Annehmlichkeiten des Alltags und das hohe Alter das Menschen in der heutigen Zeit erreichen sind ein Ergebnis des wissenschaftlichen und technologischen Fortschritts. Insbesondere in der Medizin haben die Entwicklung neuartiger Medikamente und Therapien, künstlicher Knochen und Gewebeteile sowie der Einsatz von neuen Geräten für die Diagnostik und Assistenz bei Operationen enorm zu diesen Errungenschaften beigetragen. Jede Entwicklung fundierte letztlichen auf den Ergebnissen der Grundlagenforschung sei es von Mikro-/biologen (Identifikation anormalen Verhaltens), Biochemikern (Identifikation von Auslösern und Wirkzentren) Bio-/ organischen Chemikern (Synthese von Makro-/molekülen), Material-/chemikern (Materialsynthese) und/oder Ingenieuren/Mathematikern/Physikern (theoretischen Modelle und Berechnungen). Biomedizinische Anwendungen wie z.B. Biosensoren, künstliche Gewebeteile und Trägersubstanzen zur gezielten Wirkstofffreisetzung sind von besonderem Interesse. Materialien, die nach Kontakt mit einer Zelloberfläche in der Lage sind definiert ihre Struktur oder mechanischen Eigenschaften zu verändern und anschließend bioabbaubar sind ohne toxische Nebenwirkungen zu entfalten befriedigen die zuvor genannten Bedürfnisse. Organismen entwickeln Biomaterialien bereits seit Millionen von Jahren und sind daher ein typischer Startpunkt für die Inspiration zu vielversprechenden Substanzen. Peptoide, als Mimetika von Peptiden, werden bereits längerem von Bio-/chemikern synthetisiert und auf ihren therapeutischen Nutzen hin, neuerdings auch auf ihre Materialeigenschaften untersucht. Grundlegende Eigenschaften dieser Materialien sind ihre Biokompatibilität, kontrollierte Bioabbaubarkeit, thermische Prozessierbarkeit sowie ihre Fähigkeit zur Selbstorganisation in höher geordnete Strukturen. Die sequenzdefinierte Synthese ist jedoch aufwendig und teuer. In dieser Arbeit habe ich ein alternatives Herstellungsverfahren (Ringöffnungspolymerisation) entwickelt mit dem es möglich ist hochmolekulare Substanzen - genannt poly(N-substituierte Glycine) – herzustellen. Ich erwarte, dass diese Materialien ähnliche stimulus responsive und thermische Eigenschaften wie Polypeptide, die bereits intensiv auf ihre biomedizinische Anwendbarkeit untersucht werden, haben. Im Vergleich zu den strukturgleichen Peptiden erwarte ich eine höhere Biokompatibilität sodass diese Materialen eine vielversprechende neue Klasse biorelevanter Materialien darstellen könnte. Die fundamentalen Ergebnisse dieser Arbeit stellen eine Alternative zu den bekannten Methoden zur Herstellung poly(N-substituierter Glycine) dar. Selbige weisen stimulus responsives Verhalten und thermische Prozessierbarkeit auf, das vergleichbar ist mit bereits bekannten Materialien. Darüber hinaus erlauben sie die einfache und vielseitige Funktionalisierung für vielschichtige Anwendungen. KW - Glycopeptoid KW - Polyglycin KW - NCA KW - biorelevant KW - thermoresponsiv KW - glycopeptoid KW - polyglycine KW - NCA KW - biorelevant KW - thermoresponsive Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64789 ER - TY - GEN A1 - Roder, Phillip A1 - Hille, Carsten T1 - A Multifunctional Frontloading Approach for Repeated Recycling of a Pressure-Controlled AFM Micropipette N2 - Fluid force microscopy combines the positional accuracy and force sensitivity of an atomic force microscope (AFM) with nanofluidics via a microchanneled cantilever. However, adequate loading and cleaning procedures for such AFM micropipettes are required for various application situations. Here, a new frontloading procedure is described for an AFM micropipette functioning as a force- and pressure-controlled microscale liquid dispenser. This frontloading procedure seems especially attractive when using target substances featuring high costs or low available amounts. Here, the AFM micropipette could be filled from the tip side with liquid from a previously applied droplet with a volume of only a few μL using a short low-pressure pulse. The liquid-loaded AFM micropipettes could be then applied for experiments in air or liquid environments. AFM micropipette frontloading was evaluated with the well-known organic fluorescent dye rhodamine 6G and the AlexaFluor647-labeled antibody goat anti-rat IgG as an example of a larger biological compound. After micropipette usage, specific cleaning procedures were tested. Furthermore, a storage method is described, at which the AFM micropipettes could be stored for a few hours up to several days without drying out or clogging of the microchannel. In summary, the rapid, versatile and cost-efficient frontloading and cleaning procedure for the repeated usage of a single AFM micropipette is beneficial for various application situations from specific surface modifications through to local manipulation of living cells, and provides a simplified and faster handling for already known experiments with fluid force microscopy. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 209 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-86592 ER - TY - GEN A1 - Roder, Phillip A1 - Hille, Carsten T1 - ANG-2 for quantitative Na+ determination in living cells by time-resolved fluorescence microscopy N2 - Sodium ions (Na+) play an important role in a plethora of cellular processes, which are complex and partly still unexplored. For the investigation of these processes and quantification of intracellular Na+ concentrations ([Na+]i), two-photon coupled fluorescence lifetime imaging microscopy (2P-FLIM) was performed in the salivary glands of the cockroach Periplaneta americana. For this, the novel Na+-sensitive fluorescent dye Asante NaTRIUM Green-2 (ANG-2) was evaluated, both in vitro and in situ. In this context, absorption coefficients, fluorescence quantum yields and 2P action cross-sections were determined for the first time. ANG-2 was 2P-excitable over a broad spectral range and displayed fluorescence in the visible spectral range. Although the fluorescence decay behaviour of ANG-2 was triexponential in vitro, its analysis indicates a Na+-sensitivity appropriate for recordings in living cells. The Na+-sensitivity was reduced in situ, but the biexponential fluorescence decay behaviour could be successfully analysed in terms of quantitative [Na+]i recordings. Thus, physiological 2P-FLIM measurements revealed a dopamine-induced [Na+]i rise in cockroach salivary gland cells, which was dependent on a Na+-K+-2Cl− cotransporter (NKCC) activity. It was concluded that ANG-2 is a promising new sodium indicator applicable for diverse biological systems. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 184 KW - cockroach salivary-glands KW - intracellular na+ KW - sodium green KW - periplaneta-americana KW - ventricular myocytes KW - lifetime microscopy KW - acinar-cells KW - hela-cells KW - rat Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-76851 SP - 1699 EP - 1710 PB - The Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Rozanski, Stanislaw A. A1 - Kremer, Friedrich A1 - Köberle, Peter A1 - Laschewsky, André T1 - Relaxation and charge transport in mixtures of zwitterionic polymers and inorganic salts N2 - Dielectric spectroscopy is employed to analyze the molecular dynamics and the charge transport in mixtures of zwitterionic polymers of the type poly{3 [N(-methacryloyloxyalkyl)] N, [N-dimethylammonio propanesulfonate] with sodium iodide in the frequency range of 10²Hz-10(up)7 Hz and in the temperature range of 110 K-400 K. The amount of inorganic salt added varies from 0-200 mol-% relative to the number of zwitterionic groups present in the polymer, contributing strongly to the conductivity. One relaxation process is observed whose relaxation rate depends strongly on the length of the aliphatic spacer between the polymethacrylate main chain and the zwitterionic group. Exhibiting an Arrhenius-like temperature depence with activation energy EA = 47 KJ/mol, this relaxation process is assigned to fluctuation of the quaternary ammonium groups in the side chains. At higher temperatures, the dielectric properties and the conductivity are primarily dominated by the mobile inorganic ions: conductivity strongly depends on the salt concentration, showing a pronounced electrode polarization effect. The frequency and salt concentration, dependences of the conductivity can be quantitatively described as hopping of charge carriers being subject to spatially randomly varying energy barriers. For the low-frequency regime and for the critical frequency marking the onset of the conductivity's dispersion, the Barton-Nakajima-Namikawa (BNN) relationship is fulfilled. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 093 Y1 - 1995 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17438 ER - TY - THES A1 - Rusu, Viorel Marin T1 - Composite materials made of chitosan and nanosized apatite : preparation and physicochemical characterization T1 - - N2 - Taking inspiration from nature, where composite materials made of a polymer matrix and inorganic fillers are often found, e.g. bone, shell of crustaceans, shell of eggs, etc., the feasibility on making composite materials containing chitosan and nanosized hydroxyapatite were investigated. A new preparation approach based on a co-precipitation method has been developed. In its earlier stage of formation, the composite occurs as hydrogel as suspended in aqueous alkaline solution. In order to get solid composites various drying procedures including freeze-drying technique, air-drying at room temperature and at moderate temperatures, between 50oC and 100oC were used. Physicochemical studies showed that the composites exhibit different properties with respect to their structure and composition. IR and Raman spectroscopy probed the presence of both chitosan and hydroxyapatite in the composites. Hydroxyapatite as dispersed in the chitosan matrix was found to be in the nanosize range (15-50 nm) and occurs in a bimodal distribution with respect to its crystallite length. Two types of distribution domains of hydroxyapatite crystallites in the composite matrix such as cluster-like (200-400 nm) and scattered-like domains were identified by the transmission electron microscopy (TEM), X-ray diffraction (XRD) and by confocal scanning laser microscopy (CSLM) measurements. Relaxation NMR experiments on composite hydrogels showed the presence of two types of water sites in their gel networks, such as free and bound water. Mechanical tests showed that the mechanical properties of composites are one order of magnitude less than those of compact bone but comparable to those of porous bone. The enzymatic degradation rates of composites showed slow degradation processes. The yields of degradation were estimated to be less than 10% by loss of mass, after incubation with lysozyme, for a period of 50 days. Since the composite materials were found biocompatible by the in vivo tests, the simple mode of their fabrication and their properties recommend them as potential candidates for the non-load bearing bone substitute materials. N2 - Inspiriert von Natur, bei der Kompositmaterialien aus Polymermatrices und anorganischen Füllstoffen z.B. in Knochen, Krustentieren und Eierschalen vorzufinden sind, wurde die Herstellungsmöglichkeit von Kompositmaterial aus Chitosan und Hydroxyapatitdispersionen untersucht. Basierend auf einem Kopräzipitationsverfahren wurde eine neue Herstellungsmethode entwickelt, die als flexibler Zugang zu einem Spektrum von Komposittypen führt. In den frühen Phasen der Kompositbildung entsteht ein in der wässrigen alkalischen Lösung suspendiertes Hydrogel, das durch Filtration und Zentrifugation isoliert werden kann. IR und Ramanspektroskopie klären das Vorhandensein von Chitosan und Hydroxyapatit im Kompositmaterial. Hydroxyapatit ist als Nanopartikel der Größe von 15-50 nm in bimodaler Verteilung in der Chitosanmatrix dispersiert, und in durch Transmissionselektronenmikroskopie (TEM), X-Ray Diffraction (XRD) und Konfokaler Laserscanmikroskopie (CSLM) nachweisbaren 200-400 nm großen Clustern assembliert. NMR-Relaxationsmessungen an Hydrogelkompositmaterial decken die Existenz zweier Klassen vorkommenden Wassers im Netzwerk auf, gebundenes und freies Wasser. Mechanische Tests zeigen, dass die mechanische Festigkeit etwa eine Größenordnung unter der von massivem Knochen liegt, der Festigkeit von porösem Knochen aber gleichkommt. Enzymatische Abbauraten des Kompostimaterials sind als langsam einzuschätzen. Eine 50-tägige Einwirkzeit von Lysozym führte zu einem Abbau von 10 % der Kompositmasse. Die sich durch in vivo Tests herausstellende Biokompatibilität, die einfachen Herstellungsmöglichkeiten und die physikochemischen Eigenschaften empfehlen dieses Material als vielversprechenden Kandidaten für Knochenersatzmaterial in mäßig belasteten Bereichen. KW - Chitosan KW - Hydroxyapatit KW - Nanopartikel KW - Kompositmaterial KW - Chitosan KW - hydroxyapatite KW - nanoparticles KW - composites Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-2316 ER - TY - THES A1 - Saatchi, Mersa T1 - Study on manufacturing of multifunctional bilayer systems N2 - Layered structures are ubiquitous in nature and industrial products, in which individual layers could have different mechanical/thermal properties and functions independently contributing to the performance of the whole layered structure for their relevant application. Tuning each layer affects the performance of the whole layered system. Pores are utilized in various disciplines, where low density, but large surfaces are demanded. Besides, open and interconnected pores would act as a transferring channel for guest chemical molecules. The shape of pores influences compression behavior of the material. Moreover, introducing pores decreases the density and subsequently the mechanical strength. To maintain defined mechanical strength under various stress, porous structure can be reinforced by adding reinforcement agent such as fiber, filler or layered structure to bear the mechanical stress on demanded application. In this context, this thesis aimed to generate new functions in bilayer systems by combining layers having different moduli and/or porosity, and to develop suitable processing techniques to access these structures. Manufacturing processes of layered structures employ often organic solvents mostly causing environmental pollution. In this regard, the studied bilayer structures here were manufactured by processes free of organic solvents. In this thesis, three bilayer systems were studied to answer the individual questions. First, while various methods of introducing pores in melt-phase are reported for one-layer constructs with simple geometry, can such methods be applied to a bilayer structure, giving two porous layers? This was addressed with Bilayer System 1. Two porous layers were obtained from melt-blending of two different polyurethanes (PU) and polyvinyl alcohol (PVA) in a co-continuous phase followed by sequential injection molding and leaching the PVA phase in deionized water. A porosity of 50 ± 5% with a high interconnectivity was obtained, in which the pore sizes in both layers ranged from 1 µm to 100 µm with an average of 22 µm in both layers. The obtained pores were tailored by applying an annealing treatment at relevant high temperatures of 110 °C and 130 °C, which allowed the porosity to be kept constant. The disadvantage of this system is that a maximum of 50% porosity could be reached and removal of leaching material in the weld line section of both layers is not guaranteed. Such a construct serves as a model for bilayer porous structure for determining structure-property relationships with respect to the pore size, porosity and mechanical properties of each layer. This fabrication method is also applicable to complex geometries by designing a relevant mold for injection molding. Secondly, utilizing scCO2 foaming process at elevated temperature and pressure is considered as a green manufacturing process. Employing this method as a post-treatment can alter the history orientation of polymer chains created by previous fabrication methods. Can a bilayer structure be fabricated by a combination of sequential injection molding and scCO2 foaming process, in which a porous layer is supported by a compact layer? Such a construct (Bilayer System 2) was generated by sequential injection molding of a PCL (Tm ≈ 58 °C) layer and a PLLA (Tg ≈ 58 °C) layer. Soaking this structure in the autoclave with scCO2 at T = 45 °C and P = 100 bar led to the selective foaming of PCL with a porosity of 80%, while the PLA layer was kept compact. The scCO2 autoclave led to the formation of a porous core and skin layer of the PCL, however, the degree of crystallinity of PLLA layer increased from 0 to 50% at the defined temperature and pressure. The microcellular structure of PCL as well as the degree of crystallinity of PLLA were controlled by increasing soaking time. Thirdly, wrinkles on surfaces in micro/nano scale alter the properties, which are surface-related. Wrinkles are formed on a surface of a bilayer structure having a compliant substrate and a stiff thin film. However, the reported wrinkles were not reversible. Moreover, dynamic wrinkles in nano and micro scale have numerous examples in nature such as gecko foot hair offering reversible adhesion and an ability of lotus leaves for self-cleaning altering hydrophobicity of the surface. It was envisioned to imitate this biomimetic function on the bilayer structure, where self-assembly on/off patterns would be realized on the surface of this construct. In summary, developing layered constructs having different properties/functions in the individual layer or exhibiting a new function as the consequence of layered structure can give novel insight for designing layered constructs in various disciplines such as packaging and transport industry, aerospace industry and health technology. N2 - Schichtstrukturen sind in der Natur und in Industrieprodukten allgegenwärtig, wobei die einzelnen Schichten unterschiedliche mechanische/thermische Eigenschaften und Funktionen haben können, die unabhängig voneinander zur Leistungsfähigkeit der gesamten Schichtstruktur für die jeweilige Anwendung beitragen. Die individuelle Abstimmung jeder einzelnen Schicht wirkt sich auf die Leistungsfähigkeit des gesamten Schichtsystems aus. Poren werden in verschiedenen Bereichen eingesetzt, in denen eine geringe Dichte, aber eine große Oberfläche erforderlich ist. Außerdem können offene und miteinander verbundene Poren als Übertragungskanal für chemische Gast-Moleküle dienen. Die Form der Poren beeinflusst das Kompressionsverhalten des Materials. In diesem Zusammenhang zielte diese Arbeit darauf ab, neue Funktionen in zweischichtigen Systemen durch die Kombination von Schichten mit unterschiedlichen Modulen und/oder Porosität zu erzeugen und geeignete Verarbeitungstechniken zu entwickeln, um diese Strukturen zu erreichen. Bei der Herstellung von Schichtstrukturen werden häufig organische Lösungsmittel verwendet, die meist eine Umweltbelastung darstellen. Daher wurden die hier untersuchten Doppelschichtstrukturen mit Verfahren hergestellt, die frei von organischen Lösungsmitteln sind. In dieser Arbeit wurden drei Doppelschichtsysteme untersucht, um die einzelnen Fragen zu beantworten. Erstens: Während verschiedene Methoden zur Einführung von Poren in der Schmelzphase für einschichtige Konstruktionen mit einfacher Geometrie bekannt sind, stellt sich die Frage, ob solche Methoden sich auf eine zweischichtige Struktur anwenden lassen und somit zwei unterschiedlich poröse Schichten ergibt? Dies wurde mit dem Zweischichtsystem 1 untersucht. Zwei poröse Schichten wurden durch das Mischen in der Schmelze von zwei verschiedenen Polyurethanen (PU) und Polyvinylalkohol (PVA) in einer co-kontinuierlichen Phase erhalten. Es folgte sequentielles Spritzgießen und das Entfernen der PVA-Phase durch „Leaching“ in entionisiertem Wasser. Es wurde eine Porosität von 50 ± 5 % mit einer hohen Interkonnektivität erzielt, wobei die Porengrößen in beiden Schichten zwischen 1 µm und 100 µm lagen, mit einem Durchschnittswert von 22 µm in beiden Schichten. Diese Herstellungsmethode ist auch auf komplexe Geometrien anwendbar, es muss lediglich eine entsprechende Form für das Spritzgießen entworfen werden. Zweitens: die Verwendung des scCO2-Schäumungsverfahrens bei erhöhter Temperatur und erhöhtem Druck wird als umweltfreundlicher Herstellungsprozess betrachtet. Durch den Einsatz dieser Methode als Nachbehandlung kann die Historie der Ausrichtung der Polymerketten, die durch frühere Herstellungsmethoden entstanden ist, verändert werden. Kann eine zweischichtige Struktur durch eine Kombination aus sequentiellem Spritzgießen und scCO2-Schäumverfahren hergestellt werden, bei der eine poröse Schicht von einer kompakten Schicht getragen wird? Ein solches Konstrukt (Bilayer System 2) wurde durch sequentielles Spritzgießen einer PCL-Schicht (Tm ≈ 58 °C) und einer PLLA-Schicht (Tg ≈ 58 °C) erzeugt. Das Einweichen dieser Struktur in scCO2 im Autoklaven bei T = 45 °C und P = 100 bar führte zum selektiven Aufschäumen von PCL mit einer Porosität von 80%, während die PLA-Schicht unverschäumt blieb. Die Behandlung im scCO2-Autoklav führte zur Bildung einer porösen Kern- und Hautschicht des PCL, während der Kristallinitätsgrad der PLLA-Schicht bei der definierten Temperatur und dem definierten Druck von 0 auf 50 % anstieg. Die mikrozelluläre Struktur von PCL sowie der Kristallinitätsgrad von PLLA wurden durch die Erhöhung der Einweichzeit gesteuert. Drittens verändern Falten auf Oberflächen im Mikro-/Nanomaßstab die Eigenschaften, die mit der Oberfläche zusammenhängen. Falten bilden sich auf der Oberfläche einer zweischichtigen Struktur mit einem nachgiebigen Substrat und einem steifen dünnen Film. Die Falten waren jedoch nicht reversibel. Darüber hinaus gibt es in der Natur zahlreiche Beispiele für dynamische Falten im Nano- und Mikromaßstab, wie z. B. Gecko-Fußhaare, die eine reversible Adhäsion ermöglichen, und die Fähigkeit von Lotusblättern, sich selbst zu reinigen, indem sie die Hydrophobizität der Oberfläche verändern. Diese biomimetische Funktion sollte auf der Doppelschichtstruktur nachgeahmt werden, wobei auf der Oberfläche dieses Konstrukts selbstorganisierende On/Off-Muster realisiert werden sollten. Zusammenfassend kann gesagt werden, dass die Entwicklung geschichteter Konstrukte mit unterschiedlichen Eigenschaften/Funktionen in den einzelnen Schichten oder mit einer neuen Funktion als Folge der geschichteten Struktur neue Erkenntnisse für den Entwurf geschichteter Konstrukte in verschiedenen Disziplinen wie der Verpackungs- und Transportindustrie, der Luft- und Raumfahrtindustrie und der Gesundheitstechnologie liefern kann. T2 - Studie zur Herstellung multifunktionaler Doppelschichtsysteme KW - bilayer system KW - biomaterials KW - wrinkles KW - polymer KW - injection molding KW - Doppelschichtstruktur KW - Biomaterialien KW - poröse Struktur KW - Falten KW - Spritzgießen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-601968 ER - TY - THES A1 - Sanay, Berran T1 - Monomers and polymers based on renewable resources for new photopolymer coating N2 - The present work focuses on minimising the usage of toxic chemicals by integration of the biobased monomers, derived from fatty acid esters, to photopolymerization processes, which are known to be nature friendly. Internal double bond present in the oleic acid was converted to more reactive (meth)acrylate or epoxy group. Biobased starting materials, functionalized by different pendant groups, were used for photopolymerizing formulations to design of new polymeric structures by using ultraviolet light emitting diode (UV-LED) (395 nm) via free radical polymerization or cationic polymerization. New (meth)acrylates (2,3 and 4) consisting of two isomers, methyl 9-((meth)acryloyloxy)-10-hydroxyoctadecanoate / methyl 9-hydroxy-10-((meth)acryloyloxy)octadecanoate (2 and 3) and methyl 9-(1H-imidazol-1-yl)-10-(methacryloyloxy)octadecanoate / methyl 9-(methacryloyloxy)-10-(1H-imidazol-1-yl)octadecanoate (4), modified from oleic acid mix, and ionic liquid monomers (1a and 1b) bearing long alkyl chain were polymerized photochemically. New (meth)acrylates are based on vegetable oil, and ionic liquids (ILs) have nonvolatile behaviour. Therefore, both monomer types have green approach. Photoinitiated polymerization of new (meth)acrylates and ionic liquids was investigated in the presence of ethyl (2,4,6-trimethylbenzoyl) phenylphosphinate (Irgacure® TPO−L) or di(4-methoxybenzoyl)diethylgermane (Ivocerin®) as photoinitiator (PI). Additionally, the results were discussed in comparison with those obtained from commercial 1,6-hexanediol di(meth)acrylate (5 and 6) for deeper investigation of biobased monomer’s potential to substitute petroleum derived materials with renewable resources for possible coating applications. Kinetic study shows that methyl 9-(1H-imidazol-1-yl)-10-(methacryloyloxy)octadecanoate / methyl 9-(methacryloyloxy)-10-(1H-imidazol-1-yl)octadecanoate (4) and ionic liquids (1a and 1b) have quantitative conversion after irradiation process which is important for practical applications. On the other hand, heat generation occurs in a longer time during the polymerization of biobased systems or ILs. The poly(meth)acrylates modified from (meth)acrylated fatty acid methyl ester monomers generally show a low glass transition temperature because of the presence of long aliphatic chain in the polymer structure. However, poly(meth)acrylates containing aromatic group have higher glass transition temperature. Therefore, new 4-(4-methacryloyloxyphenyl)-butan-2-one (7) was synthesized which can be a promising candidate for the green techniques, such as light induced polymerization. Photokinetic investigation of the new monomer, 4-(4-methacryloyloxyphenyl)-butan-2-one (7), was discussed using Irgacure® TPO−L or Ivocerin® as photoinitiator. The reactivity of that monomer was compared to commercial 2-phenoxyethyl methacrylate (8) and phenyl methacrylate (9) basis of the differences on monomer structures. The photopolymer of 4-(4-methacryloyloxyphenyl)-butan-2-one (7) might be an interesting candidate for the coating application with the properties of quantitative conversion and high molecular weight. It also shows higher glass transition temperature. In addition to the linear systems based on renewable materials, new crosslinked polymers were also designed in this thesis. Therefore, isomer mixture consisting of ethane-1,2-diyl bis(9-methacryloyloxy-10-hydroxy octadecanoate), ethane-1,2-diyl 9-hydroxy-10-methacryloyloxy-9’-methacryloyloxy10’-hydroxy octadecanoate and ethane-1,2-diyl bis(9-hydroxy-10-methacryloyloxy octadecanoate) (10) was synthesized by derivation of the oleic acid which has not been previously described in the literature. Crosslinked material based on this biobased monomer was produced by photoinitiated free radical polymerization using Irgacure® TPO−L or Ivocerin® as photoinitiator. Furthermore, material properties were diversified by copolymerization of 10 with 4-(4-methacryloyloxyphenyl)-butan-2-one (7) or methyl 9-(1H-imidazol-1-yl)-10-(methacryloyloxy)octadecanoate / methyl 9-(methacryloyloxy)-10-(1H-imidazol-1-yl)octadecanoate (4). In addition to this, influence of comonomer with different chemical structure on the network system was investigated by analysis of thermo-mechanical properties, crosslink density and molecular weight between two crosslink junctions. An increase in the glass transition temperature caused by copolymerization of biobased monomer 10 with the excess amount of 4-(4-methacryloyloxyphenyl)-butan-2-one (7) was confirmed by both techniques, differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). On the other hand, crosslink density decreased as a result of copolymerization reactions due to the reduction in the mean functionality of the system. Furthermore, surface characterization has been tested by contact angle measurements using solvents with different polarity. This work also contributes to the limited data reported about cationic photopolymerization of the epoxidized vegetable oils in the literature in contrast to the widely investigation of thermal curing of the biorenewable epoxy monomers. In addition to the 9,10-epoxystearic acid methyl ester (11), a new monomer of bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) has been synthesized from oleic acid. These two biobased epoxies have been polymerized via cationic photoinitiated polymerization in the presence of bis(t-butyl)-iodonium-tetrakis(perfluoro-t-butoxy)aluminate ([Al(O-t-C4F9)4]-) and isopropylthioxanthone (ITX) as photinitiating system. Polymerization kinetic of 9,10-epoxystearic acid methyl ester (11) and bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) was investigated and compared with the kinetic of commercial monomers being 3,4-epoxycyclohexylmethyl-3’,4’-epoxycyclohexane carboxylate (13), 1,4-butanediol diglycidyl ether (14), and diglycidylether of bisphenol-A (15). Both biobased epoxies (11 and 12) showed higher conversion than cycloaliphatic epoxy (13), and lower reactivity than 1,4-butanediol diglycidyl ether (14). Additional network systems were designed by copolymerization of bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) and diglycidylether of bisphenol-A (15) in different molar ratios (1:1; 1:5; 1:9). It addresses that, final conversion is dependent on polymerization rate as well as physical processes such as vitrification during polymerization. Moreover, low glass transition temperature of homopolymer derived from bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) was successfully increased by copolymerization with diglycidylether bisphenol-A (15). On the other hand, the surface produced from bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) shows hydrophobic character. Higher concentration of biobased diepoxy (12) in the copolymerizing mixture decreases surface free energy. Network systems were also investigated according to the rubber elasticity theory. Crosslinked polymer derived from the mixture of bis-(9,10-epoxystearic acid) 1,2-ethanediyl ester (12) and diglycidylether of bisphenol-A (15) (molar ratio=1:5) exhibits almost ideal polymer network. N2 - Die vorliegende Arbeit konzentriert sich auf die Minimierung des Einsatzes von giftigen Chemikalien durch die Integration von biobasierten Monomeren, die aus Fettsäureestern gewonnen werden, in Photopolymerisationsprozessen, die als naturfreundlich bekannt sind. Die in der Ölsäure vorhandene interne Doppelbindung wurde in eine reaktivere (Meth)acrylat- oder Epoxidgruppe umgewandelt. Biobasierte Ausgangsmaterialien, funktionalisiert durch verschiedene Seitengruppen, wurden für photopolymerisierende Formulierungen verwendet, um neue polymere Strukturen unter Verwendung einer ultravioletten lichtemittierenden Diode (UV-LED) (395 nm) über freie radikalische Polymerisation oder kationische Polymerisation zu entwickeln. Neue (Meth)acrylate, Methyl-9-((meth)acryloyloxy)-10-hydroxyoctadecanoat / Methyl-9-hydroxy-10-((meth)acryloyloxy)octadecanoat (2 und 3) und Methyl-9-(methacryloyloxy)-10-(1H-imidazol-1yl)octadecanoat / Methyl-9-(1H-imidazol-1yl)-10-(methacryloyloxy)octadecanoat (4), modifiziert aus einem Ölsäuregemisch und ionischen flüssigen Monomeren mit eine langen Alkylkette wurden photochemisch polymerisiert. Die neuen (Meth)acrylate basieren auf Pflanzenöl. Die ionischen Flüssigkeiten (ILs) haben ein nichtflüchtiges Verhalten. Daher haben beide Monomertypen einen grünen Ansatz. Photoinitiierte Polymerisationen von neuen (Meth)acrylaten und ionischen Flüssigkeiten wurden in Gegenwart von Ethyl-(2,4,6-trimethylbenzoyl)phenylphosphinat (Irgacure® TPO-L) oder Di(4-methoxybenzoyl)diethylgerman (Ivocerin®) als Photoinitiator untersucht. Zusätzlich wurden die Ergebnisse im Vergleich mit denen von kommerziellem 1,6-hexandiol di(meth)acrylat (5 und 6) diskutiert, um das Potenzial von biobasierten Monomeren zur Substitution von erdölbasierten Materialien durch erneuerbare Ressourcen für mögliche Beschichtungsanwendungen genauer zu untersuchen. Die kinetische Studie zeigt, dass Methyl-9-(1H-imidazol-1yl)-10-(methacryloyloxy)octadecanoat / Methyl-9-(methacryloyloxy)-10-(1H-imidazol-1yl)octadecanoat (4) und die ionischen Flüssigkeiten (1a und 1b) eine quantitative Umsetzung nach dem Bestrahlungsprozess aufweisen, was für praktische Anwendungen wichtig ist. Andererseits erfolgt die Wärmeentwicklung bei der Polymerisation von biobasierten Systemen oder ILs in einem längeren Zeitraum. Die aus Fettsäuren hergestelltem modifizierten Poly(meth)acrylate zeigen im Allgemeinen eine niedrige Glasübergangstemperatur aufgrund der Anwesenheit einer langen aliphatischen Kette in der Polymerstruktur. Poly(meth)acrylate, die eine aromatische Gruppe enthalten, haben jedoch eine höhere Glasübergangstemperatur. Daher wurde das neue 4-(4-Methacryloyloxyphenyl)-butan-2-on (7) synthetisiert, das ein vielversprechender Kandidat für die grünen Techniken, wie zum Beispiel die lichtinduzierte Polymerisation, sein kann. Die photokinetische Untersuchung des neuen Monomers, 4-(4-Methacryloyloxyphenyl)-butan-2-on (7), wurde unter Verwendung von Irgacure® TPO-L oder Ivocerin® als Photoinitiator diskutiert. Die Reaktivität dieses Monomers wurde mit kommerziellem 2-Phenoxyethylmethacrylat (8) und Phenylmethacrylat (9) aufgrund der Unterschiede in der Monomerstruktur verglichen. Das Photopolymer von 4-(4-Methacryloyloxyphenyl)-butan-2-on (7) könnte ein interessanter Kandidat und eine Alternative zu den herkömmlichen Monomeren für die Beschichtungsanwendung sein aufgrund der quantitativen Umsetzung des Monomeren und des hohen Molekulargewichts sowie einer höheren Glasübergangstemperatur des resultieren den Photopolymeren. Neben den linearen Systemen auf Basis nachwachsender Rohstoffe wurden in dieser Arbeit auch neue vernetzte Polymere entwickelt. So wurde ein Ethan-1,2-diyl bis(9-methacryloyloxy-10-hydroxy octadecanoate), Ethane-1,2-diyl 9-hydroxy-10-methacryloyloxy-9’-methacryloyloxy10’-hydroxy octadecanoat und Ethane-1,2-diyl bis(9-hydroxy-10-methacryloyloxy octadecanoat) (10) Monomer mit zwei funktionellen Gruppen durch weitere Derivatisierung der Ölsäure synthetisiert, das bisher in der Literatur nicht beschrieben wurde. Ein vernetztes Material Auf Basis dieses biobasierten Monomers wurde durch photoinitiierte, radikalische Polymerisation unter Verwendung von Irgacure® TPO-L oder Ivocerin® als Photoinitiator hergestellt. Darüber hinaus wurden die Materialeigenschaften durch Copolymerisation des 10 mit 4-(4-Methacryloyloxyphenyl)-butan-2-on (7) oder Methyl-9-(1H-imidazol-1yl)-10-(methacryloyloxy)-octadecanoat /Methyl-9-(methacryloyloxy)-10-(1H-imidazol-1yl)-octadecanoat (4) variiert. Darüber hinaus wurde der Einfluss von Comonomeren mit unterschiedlicher chemischer Struktur auf das Netzwerksystem durch Analyse der mechanischen Eigenschaften, der Glasübergangstemperaturen, der Vernetzungsdichte und des Molekulargewichts zwischen zwei Vernetzungsstellen untersucht. Eine Erhöhung der Glasübergangstemperatur durch die Copolymerisation von 10 mit einem Überschuss von 4-(4-Methacryloyloxyphenyl)-butan-2-on (7) wurde durch DSC und DMA bestätigt. Andererseits verringerte sich die Vernetzungsdichte aufgrund der Verringerung der mittleren Funktionalität des Systems. Darüber hinaus wurde die Oberflächencharakterisierung durch Kontaktwinkelmessungen unter Verwendung von Lösungsmitteln mit unterschiedlicher Polarität getestet. Diese Arbeit trägt auch zur Erweiterung der in der Literatur über die kationische Photopolymerisation der epoxidierten Pflanzenöle berichteten Erkenntnisse bei, die, im Gegensatz zu den weit verbreiteten Untersuchungen zur thermischen Härtung der biobasierten Epoxidmonomere nur begrenzt verfügbar sind. Zusätzlich zum 9,10-Epoxystearinsäuremethylester (11) wurde ein neues Monomer Bis-(9,10-epoxystearinsäure)-1,2-ethandiylester (12) auf der Basis von Ölsäure synthetisiert. Diese beiden biobasierten Epoxide wurden durch kationische photoinitiierte Polymerisation in Gegenwart von Bis(t-butyl)-iodonium-tetrakis(perfluor-t-butoxy)aluminat ([Al(O-t-C4F9)4]-) und Isopropylthioxanthon (ITX) als photostimulierendes System polymerisiert. Die Polymerisationskinetik von 9,10-Epoxystearinsäuremethylester (11) und Bis-(9,10-epoxystearinsäure)-1,2-ethandiylester (12) wurde untersucht und mit der Kinetik der kommerziellen Monomere 3,4-Epoxycyclohexylmethyl-3',4'-epoxycyclohexancarboxylat (13), 1,4-Butandioldiglycidylether (14) und Diglycidylether von Bisphenol-A (15) verglichen. Beide biobasierten Epoxide (11 und 12) zeigten eine höhere Umwandlung als das cycloaliphatische Epoxid (13) und eine geringere als 1,4-Butandioldiglycidylether (14). Weitere Netzwerksysteme wurden durch Copolymerisation von Bis-(9,10-epoxystearinsäure)-1,2-ethandiylester (12) und Diglycidylether von Bisphenol-A (15) in verschiedenen molaren Verhältnissen (1:1; 1:5; 1:9) hergestellt. Es wird angesprochen, dass der endgültige Umsatz sowohl von der Polymerisationsgeschwindigkeit als auch von physikalischen Prozessen wie der Verglasung während der Polymerisation abhängig ist. Darüber hinaus wurde die niedrige Glasübergangstemperatur des Homopolymers aus Bis-(9,10-epoxystearinsäure)-1,2-ethandiylester (12) durch Copolymerisation mit Diglycidylether von Bisphenol-A (15) erfolgreich erhöht. Andererseits zeigt die aus Bis-(9,10-epoxystearinsäure) 1,2-ethan-diylester (12) hergestellte Oberfläche einen hydrophoben Charakter. Eine höhere Konzentration des biobasierten difunktionellen Epoxids (12) in der Copolymerisationsmischung verringert die freie Oberflächenenergie. Die Netzwerksysteme wurden auch unter Einsatz der Gummielastizitätstheorie untersucht. Das vernetzte Polymer, das aus der Mischung von Bis-(9,10-epoxystearinsäure) 1,2-ethan-diylester (12) und Diglycidylether von Bisphenol-A (15) (Molverhältnis=1:5) hergestellt wurde, zeigt ein nahezu ideales Polymernetzwerk. KW - Biobased Polymers KW - Renewable Resources KW - Coating Applications KW - Photopolymers KW - Photopolymerization KW - Biobasierte Polymere KW - Beschichtungsanwendung KW - Photoinitiierte Polymerisationen KW - Photopolymer KW - Erneuerbare Ressourcen Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-518684 ER - TY - THES A1 - Santan, Harshal Diliprao T1 - Synthesis and characterization of thermosensitive hydrogels derived from polysaccharides N2 - In this work, thermosensitive hydrogels having tunable thermo-mechanical properties were synthesized. Generally the thermal transition of thermosensitive hydrogels is based on either a lower critical solution temperature (LCST) or critical micelle concentration/ temperature (CMC/ CMT). The temperature dependent transition from sol to gel with large volume change may be seen in the former type of thermosensitive hydrogels and is negligible in CMC/ CMT dependent systems. The change in volume leads to exclusion of water molecules, resulting in shrinking and stiffening of system above the transition temperature. The volume change can be undesired when cells are to be incorporated in the system. The gelation in the latter case is mainly driven by micelle formation above the transition temperature and further colloidal packing of micelles around the gelation temperature. As the gelation mainly depends on concentration of polymer, such a system could undergo fast dissolution upon addition of solvent. Here, it was envisioned to realize a thermosensitive gel based on two components, one responsible for a change in mechanical properties by formation of reversible netpoints upon heating without volume change, and second component conferring degradability on demand. As first component, an ABA triblockcopolymer (here: Poly(ethylene glycol)-b-poly(propylene glycol)-b-poly(ethylene glycol) (PEPE) with thermosensitive properties, whose sol-gel transition on the molecular level is based on micellization and colloidal jamming of the formed micelles was chosen, while for the additional macromolecular component crosslinking the formed micelles biopolymers were employed. The synthesis of the hydrogels was performed in two ways, either by physical mixing of compounds showing electrostatic interactions, or by covalent coupling of the components. Biopolymers (here: the polysaccharides hyaluronic acid, chondroitin sulphate, or pectin, as well as the protein gelatin) were employed as additional macromolecular crosslinker to simultaneously incorporate an enzyme responsiveness into the systems. In order to have strong ionic/electrostatic interactions between PEPE and polysaccharides, PEPE was aminated to yield predominantly mono- or di-substituted PEPEs. The systems based on aminated PEPE physically mixed with HA showed an enhancement in the mechanical properties such as, elastic modulus (G′) and viscous modulus (G′′) and a decrease of the gelation temperature (Tgel) compared to the PEPE at same concentration. Furthermore, by varying the amount of aminated PEPE in the composition, the Tgel of the system could be tailored to 27-36 °C. The physical mixtures of HA with di-amino PEPE (HA·di-PEPE) showed higher elastic moduli G′ and stability towards dissolution compared to the physical mixtures of HA with mono-amino PEPE (HA·mono-PEPE). This indicates a strong influence of electrostatic interaction between –COOH groups of HA and –NH2 groups of PEPE. The physical properties of HA with di-amino PEPE (HA·di-PEPE) compare beneficially with the physical properties of the human vitreous body, the systems are highly transparent, and have a comparable refractive index and viscosity. Therefore,this material was tested for a potential biological application and was shown to be non-cytotoxic in eluate and direct contact tests. The materials will in the future be investigated in further studies as vitreous body substitutes. In addition, enzymatic degradation of these hydrogels was performed using hyaluronidase to specifically degrade the HA. During the degradation of these hydrogels, increase in the Tgel was observed along with decrease in the mechanical properties. The aminated PEPE were further utilised in the covalent coupling to Pectin and chondroitin sulphate by using EDC as a coupling agent. Here, it was possible to adjust the Tgel (28-33 °C) by varying the grafting density of PEPE to the biopolymer. The grafting of PEPE to Pectin enhanced the thermal stability of the hydrogel. The Pec-g-PEPE hydrogels were degradable by enzymes with slight increase in Tgel and decrease in G′ during the degradation time. The covalent coupling of aminated PEPE to HA was performed by DMTMM as a coupling agent. This method of coupling was observed to be more efficient compared to EDC mediated coupling. Moreover, the purification of the final product was performed by ultrafiltration technique, which efficiently removed the unreacted PEPE from the final product, which was not sufficiently achieved by dialysis. Interestingly, the final products of these reaction were in a gel state and showed enhancement in the mechanical properties at very low concentrations (2.5 wt%) near body temperature. In these hydrogels the resulting increase in mechanical properties was due to the combined effect of micelle packing (physical interactions) by PEPE and covalent netpoints between PEPE and HA. PEPE alone or the physical mixtures of the same components were not able to show thermosensitive behavior at concentrations below 16 wt%. These thermosensitive hydrogels also showed on demand solubilisation by enzymatic degradation. The concept of thermosensitivity was introduced to 3D architectured porous hydrogels, by covalently grafting the PEPE to gelatin and crosslinking with LDI as a crosslinker. Here, the grafted PEPE resulted in a decrease in the helix formation in gelatin chains and after fixing the gelatin chains by crosslinking, the system showed an enhancement in the mechanical properties upon heating (34-42 °C) which was reversible upon cooling. A possible explanation of the reversible changes in mechanical properties is the strong physical interactions between micelles formed by PEPE being covalently linked to gelatin. Above the transition temperature, the local properties were evaluated by AFM indentation of pore walls in which an increase in elastic modulus (E) at higher temperature (37 °C) was observed. The water uptake of these thermosensitive architectured porous hydrogels was also influenced by PEPE and temperature (25 °C and 37 °C), showing lower water up take at higher temperature and vice versa. In addition, due to the lower water uptake at high temperature, the rate of hydrolytic degradation of these systems was found to be decreased when compared to pure gelatin architectured porous hydrogels. Such temperature sensitive architectured porous hydrogels could be important for e.g. stem cell culturing, cell differentiation and guided cell migration, etc. Altogether, it was possible to demonstrate that the crosslinking of micelles by a macromolecular crosslinker increased the shear moduli, viscosity, and stability towards dissolution of CMC-based gels. This effect could be likewise be realized by covalent or non-covalent mechanisms such as, micelle interactions, physical interactions of gelatin chains and physical interactions between gelatin chains and micelles. Moreover, the covalent grafting of PEPE will create additional net-points which also influence the mechanical properties of thermosensitive architectured porous hydrogels. Overall, the physical and chemical interactions and reversible physical interactions in such thermosensitive architectured porous hydrogels gave a control over the mechanical properties of such complex system. The hydrogels showing change of mechanical properties without a sol-gel transition or volume change are especially interesting for further study with cell proliferation and differentiation. N2 - In der vorliegenden Arbeit wurden thermosensitive Hydrogele mit einstellbaren thermo-mechanischen Eigenschaften synthetisiert. Im Allgemeinen basiert der thermische Übergang thermosensitiver Gele auf einer niedrigsten kritischen Löslichkeitstemperatur (LCST) oder kritischer Mizellkonzentration bzw. –temperatur(CMC/ CMT). Der temperaturabhängige Übergang von Sol zu Gel mit großer Volumenänderung wurde im ersten Fall bei thermosensitiven Hydrogelen beobachtet und ist vernachlässigbar für CMC/ CMT abhängige Systeme. Die Änderung des Volumens führt zum Ausschluss von Wassermolekülen, was zum Schrumpfen und Versteifen des Systems oberhalb der Übergangstemperatur führt. Die Volumenänderung kann unerwünscht sein, wenn Zellen in das Gel eingeschlossen werden sollen. Die Gelierung im zweiten Fall beruht hauptsächlich auf der Mizellbildung oberhalb der Übergangstemperatur und weiterem kolloidalem Packen von Mizellen im Bereich der Gelierungstemperatur. Weil die Gelierung hauptsächlich von der Polymerkonzentration abhängt, kann sich das Gel bei Zugabe von Lösungsmittel leicht wieder lösen. Hier sollten thermosensitive Gele entwickelt werden, die auf zwei Komponenten beruhen. Eine Komponente sollte aus einem ABA-Triblockcopolymer mit thermosensitiven Eigenschaften bestehen, dem Poly(ethylen glycol)-b-Poly(propylenglycol)-b-Poly(ethylen glycol) (PEPE), dessen Sol-Gel-Übergang auf Mizellierung und kolloidalem Jamming der gebildeten Mizellen basiert, und einer weiteren makromolekularen Komponente, einem Biopolymer, dass die Mizellen vernetzt. Auf diese Weise sollten thermosensitive Gele realisiert werden, die keine oder nur eine kleine Volumenänderung während der Änderung der mechanischen Eigenschaften zeigen, die stabiler gegenüber Verdünnung sein sollten als klassische Hydrogele mit einem CMC-basierten Übergang und die jedoch gezielt abgebaut werden können. Die Hydrogele wurden auf zwei Arten vernetzt, entweder durch physikalisches Vermischen, bei dem die Vernetzung durch elektrostatische Wechselwirkungen erfolgte, oder durch kovalente Kopplung der beiden Komponenten. Als makromolekulare Komponente zur Vernetzung der Mizellen wurden Biopolymere (hier: die Polysaccharide Hyaluronsäure (HA), Chondroitinsulfat oder Pektin oder das Protein Gelatin) verwendet, um die Hydrogele enzymatisch abbaubar zu gestalten. Um eine starke ionische/elektrostatische Wechselwirkung zwischen dem PEPE und den Polysachariden zu erzielen, wurde PEPE aminiert, um hauptsächlich monoaminiertes bzw. diaminiertes PEPE einsetzen zu können. Die Gele, die auf der physikalischen Mischung von aminierten PEPE mit HA bestehen, zeigten im Vergleich zu PEPE bei gleicher Konzentration eine Zunahme der mechanischen Eigenschaften, wie beispielsweise dem elastischem Modulus (G′) und dem Viskositätsmodulus (G′′) bei gleichzeitiger Abnahme der Gelierungstemperatur (Tgel). Durch Variation des Gehalts an aminierten PEPE-, konnte die Tgel in einem Bereich von 27-36 °C eingestellt werden. Interessanterweise zeigten die physikalischen Mischungen mit diaminierten PEPE (HA·di-PEPE) höhere mechanische Eigenschaften (elastischer Modulus G′) und eine höhere Stabilität gegenüber Verdünnungseffekten als Mischungen mit monoaminiertem PEPE (HA·mono-PEPE). Dies zeigt den starken Einfluss der elektrostatischen Wechselwirkungen zwischen der Carboxylgruppe der HA und der Amingruppe von PEPE. Die physikalischen Eigenschaften HA·di-PEPE sind vergleichbar mit den physikalischen Eigenschaften des Glaskörpers im Auge hinsichtlich Transparenz, Brechungsindex und Viskosität. Deswegen wurde das Material hinsichtlich seiner biologischen Anwendung getestet und zeigte sich sowohl im Überstand als auch im direkten Kontakt als nichtzytotoxisch. Zukünftig wird dieses Material in weiteren Untersuchungen bezüglich seiner Eignung als Glaskörperersatz geprüft werden. Zusätzlich konnte der enzymatische Abbau der Hydrogele mit Hyaluronidase gezeigt werden, die spezifisch HA abbaut. Beim Abbau der Hydrogele stieg Tgel bei gleichzeitiger Abnahme der mechanischen Eigenschaften. Aminiertes PEPE wurde zusätzlich zur kovalenten Bindung unter Verwendung von EDC als Aktivator an Pektin und Chondroitinsulfat eingesetzt. Tgel konnte auf 28 – 33 °C eingestellt werden durch Variation der Pfropfungsdichte am Biopolymer bei gleichzeitiger Zunahme der thermischen Stabilität. Die Pec-g-PEPE Hydrogele waren enzymatisch abbaubar, was zu einer leichten Erhöhung von Tgel und zu einer Abnahme von G′ führte. Die kovalente Bindung der aminierten PEPE an HA erfolgte unter Verwendung von DMTMM als Aktivator, der sich in diesem Fall als effektiver als EDC herausstellte. Die Reinigung mittels Ultrafiltration führte zu einer deutlich besseren Aufreinigung des Produkts als mittels Dialyse. Die gegrafteten Systeme waren in Nähe der Körpertemperatur bereits im Gelstadium und zeigten eine Erhöhung der mechanischen Eigenschaften bereits bei sehr geringen Konzentrationen von 2.5Gew.%. Die höheren mechanischen Eigenschaften dieser Hydrogele erklären sich durch die Kombination der Mizellbildung (physikalische Wechselwirkung) des PEPE und der Bildung kovalenter Netzpunkte zwischen PEPE und HA. PEPE bzw. entsprechende physikalische Mischungen derselben Komponenten zeigten kein thermosensitives Verhalten bei einer Konzentration unterhalb von 16 Gew%. Diese thermosensitiven Hydrogele zeigten auch eine Löslichkeit auf Abruf durch enzymatischen Abbau. Das Konzept der Thermosensitivität wurde in 3D strukturierte, poröse Hydrogele (TArcGel)eingeführt, bei dem PEPE kovalent an Gelatin gebunden wurde und mit LDI vernetzt wurde. Das gepfropfte PEPE führte zu einer Erniedrigung der Helixbildung der Gelatinketten. Nach Fixierung der Gelatinketten durch Vernetzung zeigte das System eine Erhöhung der mechanischen Eigenschaften bei Erwärmung (34-42 °C). Dieses Phänomen war reversibel beim Abkühlen. Eine mögliche Erklärung der reversiblen Änderungen bezüglich der mechanischen Eigenschaften sind die starken physikalischen Wechselwirkungen zwischen den Mizellen des PEPE, die kovalent an Gelatin gebunden wurden. Ferner wurde durch AFM Untersuchungen festgestellt, dass bei Temperaturerhöhung (37 °C) die örtlichen elastischen Moduli (E) der Zellwände zugenommen haben. Zusätzlich wurde die Wasseraufnahme der TArcGele durch PEPE und die Temperatur (25 °C und 37 °C) beeinflusst und zeigte eine niedrigere Wasseraufnahme bei höherer Temperatur und umgekehrt. Durch die niedrigere Wasseraufnahme bei hohen Temperaturen erniedrigte sich die Geschwindigkeit des hydrolytischen Abbaus im Vergleich zu dem strukturierten Hydrogel aus reiner Gelatin. Diese temperatursensitiven ArcGele könnten bedeutsam sein für Anwendungen im Bereich Stammzellkultivierung, Zelldifferenzierung und gerichteter Zellmigration. Zusammenfassend konnte bei den thermosensitiven Hydrogelen gezeigt werden, dass die Vernetzung von Mizellen mit einem makromolekularen Vernetzer die Schermoduli, Viskosität und Löslichkeitsstabilität im Vergleich zu reinen ABATriblockcopolymeren mit CMC-Übergang erhöht. Dieser Effekt konnte durch kovalente und nichtkovalente Mechanismen, wie beispielsweise Mizell- Wechselwirkungen, physikalische Interaktionen von Gelatinketten und physikalische Interaktionen von Gelatinketten und Mizellen, realisiert werden. Das Pfropfen von PEPE führte zu zusätzlichen Netzpunkten, die die mechanischen Eigenschaften der thermosensitiven architekturisierten, porösen Hydrogele beeinflussten. Insgesamt ermöglichten die physikalischen und chemischen Bindungen und die reversiblen physikalischen Wechselwirkungen in den strukturierten, porösen Hydrogelen eine Kontrolle der mechanischen Eigenschaften in diesem sehr komplexen System. Die Hydrogele, die eine Veränderung ihrer mechanischen Eigenschaften ohne Volumenänderung oder Sol-Gel-Übergang zeigen sind besonders interessant für Untersuchungen bezüglich Zellproliferation und –differenzierung. KW - thermosensitive KW - hydrogels KW - biomaterials KW - biopolymers KW - sol-gel Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-69793 ER - TY - THES A1 - Sapei, Lanny T1 - Characterisation of silica in Equisetum hyemale and its transformation into biomorphous ceramics T1 - Charakterisierung von Siliciumdioxid in Winterschachtelhalmen und dessen Umwandlung in biomorphe Keramiken N2 - Equisetum spp. (horsetail / “Schachtelhalm”) is the only surviving genus of the primitive Sphenopsids vascular plants which reached their zenith during the Carboniferous era. It is an herbaceous plant and is distinguished by jointed stems with fused whorl of nodal leaves. The plant has been used for scouring kitchen utensils and polishing wood during the past time due to its high silica encrustations in the epidermis. Equisetum hyemale (scouring rush) can accumulate silica up to 16% dry weight in its tissue, which makes this plant an interesting candidate as a renewable resource of silica for the synthesis of biomorphous ceramics. The thesis comprises a comprehensive experimental study of silica accumulations in E.hyemale using different characterisation techniques at all hierarchical levels. The obtained results shed light on the local distribution, chemical form, crystallinity, and nanostructure of biogenic silica in E.hyemale which were quite unclear until now. Furthermore, isolation of biogenic silica from E.hyemale to obtain high grade mesoporous silica with high purity is investigated. Finally, syntheses of silicon carbide (b-SiC) by a direct thermoconversion process of E.hyemale is attempted, which is a promising material for high performance ceramics. It is found that silica is deposited continuously on the entire epidermal layer with the highest concentration on the knobs. The highest silicon content is at the knob tips (≈ 33%), followed by epidermal flank (≈ 17%), and inner lower knob (≈ 6%), whereas there is almost no silicon found in the interior parts. Raman spectroscopy reveals the presence of at least two silica modifications in E.hyemale. The first type is pure hydrated amorphous silica restricted to the knob tips. The second type is accumulated on the entire continuous outer layer adjacent to the epidermis cell walls. It is lacking silanol groups and is intimately associated with polysaccharides (cellulose, hemicellulose, pectin) and inorganic compounds. Silica deposited in E.hyemale is found to be mostly amorphous with almost negligible amounts of crystalline silica in the form of a-quartz (< 7%). The silica primary particles have a plate-like shape with a thickness of about 2 nm. Pure mesoporous amorphous silica with an open surface area up to 400 m2/g can be obtained from E.hyemale after leaching the plant with HCl to remove the inorganic impurities followed by a calcination treatment. The optimum calcination temperature appears to be around 500°C. Calcination of untreated E.hyemale causes a collapse of the biogenic silica structure which is mainly attributed to the detrimental action of alkali ions present in the native plant. Finally, pure b-SiC with a surface area of about 12 m2/g is obtained upon direct pyrolysis of HCl-treated E.hyemale samples in argon atmosphere. The original structure of native E.hyemale is substantially retained in the biomorphous b-SiC. The results of this thesis lead to a better understanding of the silicification process and allow to draw conclusions about the role of silica in E.hyemale. In particular, a templating role of the plant biopolymers for the synthesis of the nanostructured silica within the plant body can be deduced. Moreover, the high grade ultrafine amorphous silica isolated from E.hyemale promises applications as adsorbent and catalyst support and as silica source for the fabrication of silica-based composites. The synthesis of biomorphous b-SiC from sustainable and low-cost E.hyemale is still in its initial stage. The present thesis demonstrates the principal possibility of carbothermal synthesis of SiC from E.hyemale with the prospect of potential applications, for instance as refractory materials, catalyst supports, or high performance advanced ceramics. N2 - Equisetum spp. (Schachtelhalm) ist die einzige überlebende Gattung der Schachtelhalmgewächse, die ihren Zenit während der Karbon Ära erreichten. Der Schachtelhalm ist eine krautartige Pflanze und wird durch verbundene Stämme mit fixiertem Wirtel der Knotenblätter unterschieden. Aufgrund seiner hohen Siliciumdioxid Bedeckung in der Epidermis sind Winterschachtelhalmen lange Zeit zur Reinigung von Küchegeräten und zum Polieren von Holz verwendet worden. Der Winterschachtelhalm (auch Scheuerkraut genannt) kann Siliciumdioxid bis zu 16% Trockengewicht in seinem Gewebe ansammeln. Dies macht aus dieser Pflanze einen interessanten Kandidaten als erneubare Ressource von Siliciumdioxid für die Synthese von biomorphen Keramiken. Die vorliegende Doktorarbeit beinhaltet eine ausführliche experimentelle Studie der Siliciumdioxidansammlungen in Winterschachtelhalmen mittels unterschiedlicher Charakterisierungstechniken auf allen hierarchischen Ebenen. Die Ergebnisse der Arbeit werfen neues Licht auf die lokale Verteilung, die chemischen Form, die Kristallinität und die Nanostruktur des biogenen Siliciumdioxids, die bisher ziemlich unklar waren. Außerdem werden Möglichkeiten zur Isolierung des biogenen Siliciumdioxids aus Winterschachtelhalmen untersucht, um hochgradig reines Siliciumdioxid zu erhalten. Auch wird die direkte carbothermale Synthese von Siliciumkarbid (b-SiC) aus Schachtelhalmen untersucht, mit dem Ziel einer kostengünstigen Herstellung von Hochleistungskeramiken aus nachwachsenden Rohstoffen Es wird gezeigt, dass das Siliciumdioxid in einer kontinuierlichen Schicht in der Epidermis vorliegt, mit der höchsten Siliciumkonzentration in den auffälligen knopfartigen Ausbuchtungen. Den höchsten Siliciumgehalt zeigen die Knopfspitzen (≈ 33%), gefolgt von der epidermalen Flanke (≈ 17%) und inneren unteren Teile der Knöpfe (≈ 6%), während es in den inneren Teilen der Pflanze praktisch kein Silicium gibt. Ramanspektroskopie beweist eindeutig, dass mindestens zwei Siliciumdioxid Modifikationen vorhanden sind. Der erste Typ ist reines hydratisiertes amorphes Siliciumdioxid, das auf den Bereich der Knopfspitzen beschränkt ist. Der zweite Typ wird in der gesamten kontinuierlichen äußeren Schicht angesammelt, weist keine Ramanbanden von Silanolgruppen auf, und ist örtlich eng verknüpft mit Banden von Polysacchariden (Zellulose, Hemizellulose, Pektin) sowie anorganischen Verbindungen. Der Großteil des Siliciumdioxids in Winterschachtelhalmen ist amorph mit unwesentlichen Mengen an kristallinem a-Quarz (< 7%). Die primären Siliciumdioxidpartikel haben eine plattenähnliche Form mit einer Dicke von ungefähr 2 nm. Hochreines mesoporöses amorphes Siliciumdioxid mit offener Porosität und innerer Oberfläche bis zu 400 m2/g kann aus Winterschachtelhalmen isoliert werden. Dies wird erreicht indem man die Pflanze mit Salzsäure behandelt um die anorganischen Verunreinigungen zu entfernen, gefolgt von einer Kalzinierung, wobei die optimale Temperatur bei etwa 500°C liegt. Im Gegensatz zu den chemisch vorbehandelten Schachtelhalmen, verursacht die Kalzinierung von unbehandelten Winterschachtelhalmen einen Kollaps der biogenen Siliciumdioxidstruktur, und es werden nur sehr kleine innere Oberflächen erzielt. Dies wird hauptsächlich dem Einfluss der Alkaliionen zugeschrieben die in der unbehandelten Pflanze vorhanden sind. Es wird schließlich gezeigt, dass durch direkte Pyrolyse der HCl-behandelten Winterschachtelhalme in Argonatmosphäre reines b-SiC mit einer Oberfläche von ungefähr 12 m2/g erzeugt werden kann. Die ursprüngliche Struktur von natürlichen Winterschachtelhalmen bleibt dabei im Wesentlichen im biomorphen b-SiC erhalten. Die Ergebnisse dieser Arbeit führen zu einem besseren Verständnis des Silicifizierungsprozesses und erlauben es auch, Aussagen über die mögliche Rolle von Siliciumdioxid in E.hyemale zu treffen. Insbesondere kann den Pflanzenpolymeren die Rolle eines Templates bei der Synthese des biogenen Siliciumdioxids im Pflanzengewebe zugeschrieben werden. Das aus den Pflanzen isolierte ultrafeine amorphe Siliciumdioxid mit hoher Reinheit verspricht potentielle Anwendungen, z.B. als Adsorbent oder Katalysatorsupport, und auch als Füllmaterial für die Herstellung von Komopositmaterialien. Die Synthese von biomorphem b-SiC aus erneubaren und preiswerten Winterschachtelhalmen steht zwar erst am Anfang, jedoch konnte die vorliegende Arbeit die prinzipielle Machbarkeit aufzeigen. Dieses Material scheint sehr vielversprechend für eine Reihe technischer Anwendung, zum Beispiel als Refraktärmaterial, Katalysatorsupport oder neuartige Hochleistungskeramik. KW - Siliciumdioxid KW - Winterschachtelhalm KW - Raman KW - Röntgenbeugung KW - Mikrotomographie KW - silica KW - Equisetum hyemale KW - Raman KW - SAXS KW - microtomography Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15883 ER - TY - GEN A1 - Sarauli, David A1 - Xu, Chenggang A1 - Dietzel, Birgit A1 - Schulz, Burkhard A1 - Lisdat, Fred T1 - A multilayered sulfonated polyaniline network with entrapped pyrroloquinoline quinone-dependent glucose dehydrogenase BT - tunable direct bioelectrocatalysis N2 - A feasible approach to construct multilayer films of sulfonated polyanilines – PMSA1 and PABMSA1 – containing different ratios of aniline, 2-methoxyaniline-5-sulfonic acid (MAS) and 3-aminobenzoic acid (AB), with the entrapped redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) on Au and ITO electrode surfaces, is described. The formation of layers has been followed and confirmed by electrochemical impedance spectroscopy (EIS), which demonstrates that the multilayer assembly can be achieved in a progressive and uniform manner. The gold and ITO electrodes subsequently modified with PMSA1:PQQ-GDH and PABMSA1 films are studied by cyclic voltammetry (CV) and UV-Vis spectroscopy which show a significant direct bioelectrocatalytical response to the oxidation of the substrate glucose without any additional mediator. This response correlates linearly with the number of deposited layers. Furthermore, the constructed polymer/enzyme multilayer system exhibits a rather good long-term stability, since the catalytic current response is maintained for more than 60% of the initial value even after two weeks of storage. This verifies that a productive interaction of the enzyme embedded in the film of substituted polyaniline can be used as a basis for the construction of bioelectronic units, which are useful as indicators for processes liberating glucose and allowing optical and electrochemical transduction. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 275 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98744 ER - TY - THES A1 - Saretia, Shivam T1 - Modulating ultrathin films of semi-crystalline oligomers by Langmuir technique T1 - Modulation ultradünner Filme aus semikristalliner Oligomere durch Langmuir-Technik N2 - Polymeric films and coatings derived from semi-crystalline oligomers are of relevance for medical and pharmaceutical applications. In this context, the material surface is of particular importance, as it mediates the interaction with the biological system. Two dimensional (2D) systems and ultrathin films are used to model this interface. However, conventional techniques for their preparation, such as spin coating or dip coating, have disadvantages, since the morphology and chain packing of the generated films can only be controlled to a limited extent and adsorption on the substrate used affects the behavior of the films. Detaching and transferring the films prepared by such techniques requires additional sacrificial or supporting layers, and free-standing or self supporting domains are usually of very limited lateral extension. The aim of this thesis is to study and modulate crystallization, melting, degradation and chemical reactions in ultrathin films of oligo(ε-caprolactone)s (OCL)s with different end-groups under ambient conditions. Here, oligomeric ultrathin films are assembled at the air-water interface using the Langmuir technique. The water surface allows lateral movement and aggregation of the oligomers, which, unlike solid substrates, enables dynamic physical and chemical interaction of the molecules. Parameters like surface pressure (π), temperature and mean molecular area (MMA) allow controlled assembly and manipulation of oligomer molecules when using the Langmuir technique. The π-MMA isotherms, Brewster angle microscopy (BAM), and interfacial infrared spectroscopy assist in detecting morphological and physicochemical changes in the film. Ultrathin films can be easily transferred to the solid silicon surface via Langmuir Schaefer (LS) method (horizontal substrate dipping). Here, the films transferred on silicon are investigated using atomic force microscopy (AFM) and optical microscopy and are compared to the films on the water surface. The semi-crystalline morphology (lamellar thicknesses, crystal number densities, and lateral crystal dimensions) is tuned by the chemical structure of the OCL end-groups (hydroxy or methacrylate) and by the crystallization temperature (Tc; 12 or 21 °C) or MMAs. Compression to lower MMA of ~2 Å2, results in the formation of a highly crystalline film, which consists of tightly packed single crystals. Preparation of tightly packed single crystals on a cm2 scale is not possible by conventional techniques. Upon transfer to a solid surface, these films retain their crystalline morphology whereas amorphous films undergo dewetting. The melting temperature (Tm) of OCL single crystals at the water and the solid surface is found proportional to the inverse crystal thickness and is generally lower than the Tm of bulk PCL. The impact of OCL end-groups on melting behavior is most noticeable at the air-solid interface, where the methacrylate end-capped OCL (OCDME) melted at lower temperatures than the hydroxy end-capped OCL (OCDOL). When comparing the underlying substrate, melting/recrystallization of OCL ultrathin films is possible at lower temperatures at the air water interface than at the air-solid interface, where recrystallization is not visible. Recrystallization at the air-water interface usually occurs at a higher temperature than the initial Tc. Controlled degradation is crucial for the predictable performance of degradable polymeric biomaterials. Degradation of ultrathin films is carried out under acidic (pH ~ 1) or enzymatic catalysis (lipase from Pseudomonas cepcia) on the water surface or on a silicon surface as transferred films. A high crystallinity strongly reduces the hydrolytic but not the enzymatic degradation rate. As an influence of end-groups, the methacrylate end-capped linear oligomer, OCDME (~85 ± 2 % end-group functionalization) hydrolytically degrades faster than the hydroxy end capped linear oligomer, OCDOL (~95 ± 3 % end-group functionalization) at different temperatures. Differences in the acceleration of hydrolytic degradation of semi-crystalline films were observed upon complete melting, partial melting of the crystals, or by heating to temperatures close to Tm. Therefore, films of densely packed single crystals are suitable as barrier layers with thermally switchable degradation rates. Chemical modification in ultrathin films is an intricate process applicable to connect functionalized molecules, impart stability or create stimuli-sensitive cross-links. The reaction of end-groups is explored for transferred single crystals on a solid surface or amorphous monolayer at the air-water interface. Bulky methacrylate end-groups are expelled to the crystal surface during chain-folded crystallization. The density of end-groups is inversely proportional to molecular weight and hence very pronounced for oligomers. The methacrylate end-groups at the crystal surface, which are present at high concentration, can be used for further chemical functionalization. This is demonstrated by fluorescence microscopy after reaction with fluorescein dimethacrylate. The thermoswitching behavior (melting and recrystallization) of fluorescein functionalized single crystals shows the temperature-dependent distribution of the chemically linked fluorescein moieties, which are accumulated on the surfaces of crystals, and homogeneously dispersed when the crystals are molten. In amorphous monolayers at the air-water interface, reversible cross-linking of hydroxy-terminated oligo(ε-caprolactone) monolayers using dialdehyde (glyoxal) lead to the formation of 2D networks. Pronounced contraction in the area occurred for 2D OCL films in dependence of surface pressure and time indicating the reaction progress. Cross linking inhibited crystallization and retarded enzymatic degradation of the OCL film. Altering the subphase pH to ~2 led to cleavage of the covalent acetal cross-links. Besides as model systems, these reversibly cross-linked films are applicable for drug delivery systems or cell substrates modulating adhesion at biointerfaces. N2 - Ultradünne Filme/Beschichtungen aus semikristallinen oligomeren Makromolekülen sind für medizinische und pharmazeutische Anwendungen von Bedeutung. Dabei kommt der Materialoberfläche eine besondere Bedeutung zu, da diese die Interaktion mit dem umgebenden biologischen System ermöglicht. Zur Modellierung der Oberfläche werden 2D Systeme und ultradünne Filme verwendet. Herkömmlichen Techniken zu deren Präparation wie Spin-Coating oder Dip-Coating haben jedoch Nachteile, da sich die Morphologie und Kettenpackung der erzeugten Filme nur sehr bedingt kontrollieren lässt und sich die Adsorption auf dem verwendeten Substrat auf das Verhalten der Filme auswirkt. Zum Ablösen oder Übertragen der mit Hilfe dieser Techniken hergestellten Filme sind zusätzliche Opfer- oder Transferschichten erforderlich. Zudem können mit diesen Methoden nur freistehende oder selbsttragende Filme von sehr geringer lateraler Ausdehnung hergestellt werden. Das Ziel dieser Arbeit ist es, Kristallisation, Schmelzen, Abbau und chemische Reaktionen in ultradünnen Filmen von Oligo(ε-caprolacton)en (OCL)s mit unterschiedlichen Endgruppen unter Umgebungsbedingungen zu untersuchen und zu kontrollieren. Dazu wurden ultradünne Filme an der Luft-Wasser-Grenzfläche mit der Langmuir-Technik erzeugt. Die Wasseroberfläche erlaubt eine ungestörte Bewegung und Aggregation der Oligomere, was, im Gegensatz zu festen Substraten, dynamische physikalische und chemische Interaktion der Moleküle miteinander ermöglicht. Die Langmuir-Technik erlaubt mit Hilfe von Parametern wie Temperatur, Oberflächendruck (π) und Fläche pro Wiederholheinheit eine kontrollierte Manipulation der Oligomere. Kompressionsiothermen, Brewster-Winkelmikroskopie und Grenzflächen-Infrarotspektroskopie halfen beim Nachweis morphologischer und physikalisch-chemischer Veränderungen im Film. Die ultradünnen Filme wurden über das Langmuir-Schäfer-Verfahren (Kontakt mit Substrat in paralleler Orientierung zur Grenzfläche) auf Siliziumsubstrate übertragen. Danach wurden die übertragenen Filme mittels AFM und optischer Mikroskopie untersucht und mit Filmen an der Wasseroberfläche verglichen. Die teilkristalline Morphologie (Lamellendicke, Kristallzahldichte und laterale Dimension der Kristalle) von Polymerfilmen kann durch die chemische Struktur der OCL-Endgruppen (Hydroxy oder Methacrylat) und durch die Kristallisationstemperatur (Tc; 12 oder 21 °C) oder die Fläche pro Wiederholeinheit beeinflusst werden. Die Kompression auf eine sehr kleine Fläche pro Wiederholeinheit von ~2 Å2 führt zur Bildung eines hochkristallinen Films, der aus dicht gepackten Einkristallen besteht. Eine Synthese von derartigen Filmen im cm2 Maßstab ist mit herkömmlichen Techniken nicht möglich. Nach Übertragung auf eine feste Oberfläche behielten die teilkristallinen Filme ihre Morphologie, während amorphe Filme das für Polymere charakteristische Entnetzungsverhalten aufwiesen. Die Schmelztemperaturen (Tm) von OCL-Einkristallen an der Wasser- und Festkörperoberfläche waren proportional zur inversen Kristalldicke und im Allgemeinen niedriger als die Tm von PCL im Festkörper. Der Einfluss der OCL-Endgruppen auf das Schmelzverhalten war an der Luft-Feststoff-Grenzfläche am deutlichsten, wo OCL mit Methacrylat-Endgruppen bei niedrigeren Temperaturen schmolz als OCL mit Hydroxyl-Endgruppen. Das Schmelzen/Rekristallisieren ultradünner OCL-Filme an der Luft-Wasser-Grenzfläche erfolgte bei niedrigeren Temperaturen als an der Luft-Feststoff-Grenzfläche, wo keine Rekristallisation beobachtet wurde. Die Rekristallisation geschmolzener Filme an der Luft-Wasser-Grenzfläche erfolgte normalerweise bei einer höheren Temperatur als der anfänglichen Tc. Der kontrollierte Abbau ist entscheidend für die Performance von abbaubaren Polymeren als Biomaterialien. Der Abbau ultradünner Filme erfolgte hydrolytisch entweder unter saurer (pH ~ 1) oder enzymatischer Katalyse (Lipase aus Pseudomonas cepcia) auf der Wasseroberfläche oder als übertragene Filme auf Siliziumoberflächen. Eine hohe Kristallinität reduzierte die hydrolytische Abbaurate stark, aber die enzymatische dagegen wenig. Das lineare Oligomer mit Methacrylat Endgruppen (~85 ± 2 % Endgruppenfunktionalisierung) wurde bei unterschiedlichen Temperaturen schneller hydrolytisch abgebaut als das lineare Oligomer mit Hydroxyl Endgruppen (~95 ± 3 % Endgruppenfunktionalisierung). Unterschiede in der Beschleunigung des hydrolytischen Abbaus von teilkristallinen Filmen wurden beim vollständigen Schmelzen, teilweisen Schmelzen der Kristalle, oder durch erwärmen in die Nähe von Tm beobachtet. Daher eignen sich Filme aus dicht gepackten Einkristallen als Barriereschichten mit thermisch schaltbarer Degradationsrate. Chemische Reaktionen in ultradünnen Filmen können angewandt werden, um funktionalisierte Moleküle zu verbinden und ihnen Stabilität zu verleihen oder Stimuli-sensitive Vernetzungen zu erzeugen. Hier wurden die Reaktionen der Endgruppen transferierter Einkristalle auf festen Oberflächen und amorphen Monoschichten an der Luft-Wasser-Grenzfläche untersucht. Da die Kettenenden defekte in den Einkristallen darstellen würden, werden sie bei der Kristallisation an der Kristalloberfläche angeordnet. Die Dichte der Endgruppen ist umgekehrt proportional zum Molekulargewicht und daher bei Oligomeren besonders hoch. Hier wurden mit Methacrylatendgruppen versehene OCL Moleküle verwendet. Diese Gruppen können chemisch weiter umgesetzt und für eine Funktionalisierung der Kirstalle verwendet werden. Dies wurde fluoreszenz-mikroskopisch nach der Reaktion mit Fluoresceindimethacrylat nachgewiesen. Das thermische Schalten (Schmelzen und Umkristallisieren) von Fluorescein-funktionalisierten Einkristallen erzeugt eine temperaturabhängige Verteilung der chemisch verknüpften Fluorescein-Einheiten, die sich auf den Oberflächen der Kristalle ansammeln und beim Schmelzen der Kristalle homogen dispergiert werden. In amorphen Monoschichten an der Luft-Wasser-Grenzfläche führt die reversible Vernetzung von Hydroxy-terminierten Oligo(ε-caprolacton) Monoschichten unter Verwendung eines Dialdehyds (Glyoxal) zur Bildung von zweidimensionalen (2D) Netzwerken. Bei 2D-OCL-Filmen trat eine ausgeprägte Kontraktion der Fläche in Abhängigkeit von Oberflächendruck und Zeit auf, was den Fortschritt der Reaktion anzeigte. Die Vernetzung hemmte die Kristallisation und verzögerte den enzymatischen Abbau des OCL-Films. Eine Änderung des pH-Wertes der Subphase auf ~2 führte zur Spaltung der kovalenten Acetalvernetzungen. Außer als Modellsysteme wäre der Einsatz dieser reversibel vernetzten Filme für den Einsatz als Drug-Delivery-Systeme oder als Oberflächen zur Steuerung der Adhäsion von Zellen möglich. KW - polymer KW - poly(ε-caprolactone) KW - 2D material KW - ultrathin film KW - single crystals KW - crystallization KW - melting KW - degradation KW - hydrolysis KW - reactions KW - substrate KW - end-groups KW - hydroxy KW - methacrylate KW - Polymer KW - Poly(ε-caprolacton) KW - 2D-Material KW - Beschichtungen KW - Ultradünne Filme KW - Einkristalle KW - Kristallisation KW - Schmelz KW - Abbau KW - Hydrolyse KW - Reaktion KW - Substrat KW - Hydroxyl KW - Methacrylat Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-542108 ER - TY - THES A1 - Sarhan, Radwan Mohamed T1 - Plasmon-driven photocatalytic reactions monitored by surface-enhanced Raman spectroscopy T1 - Plasmonen-getriebene photokatalytische Reaktionen, gemessen mittels oberflächenverstärkter Raman-Spektroskopie N2 - Plasmonic metal nanostructures can be tuned to efficiently interact with light, converting the photons into energetic charge carriers and heat. Therefore, the plasmonic nanoparticles such as gold and silver nanoparticles act as nano-reactors, where the molecules attached to their surfaces benefit from the enhanced electromagnetic field along with the generated energetic charge carriers and heat for possible chemical transformations. Hence, plasmonic chemistry presents metal nanoparticles as a unique playground for chemical reactions on the nanoscale remotely controlled by light. However, defining the elementary concepts behind these reactions represents the main challenge for understanding their mechanism in the context of the plasmonically assisted chemistry. Surface-enhanced Raman scattering (SERS) is a powerful technique employing the plasmon-enhanced electromagnetic field, which can be used for probing the vibrational modes of molecules adsorbed on plasmonic nanoparticles. In this cumulative dissertation, I use SERS to probe the dimerization reaction of 4-nitrothiophenol (4-NTP) as a model example of plasmonic chemistry. I first demonstrate that plasmonic nanostructures such as gold nanotriangles and nanoflowers have a high SERS efficiency, as evidenced by probing the vibrations of the rhodamine dye R6G and the 4-nitrothiophenol 4-NTP. The high signal enhancement enabled the measurements of SERS spectra with a short acquisition time, which allows monitoring the kinetics of chemical reactions in real time. To get insight into the reaction mechanism, several time-dependent SERS measurements of the 4-NTP have been performed under different laser and temperature conditions. Analysis of the results within a mechanistic framework has shown that the plasmonic heating significantly enhances the reaction rate, while the reaction is probably initiated by the energetic electrons. The reaction was shown to be intensity-dependent, where a certain light intensity is required to drive the reaction. Finally, first attempts to scale up the plasmonic catalysis have been performed showing the necessity to achieve the reaction threshold intensity. Meanwhile, the induced heat needs to quickly dissipate from the reaction substrate, since otherwise the reactants and the reaction platform melt. This study might open the way for further work seeking the possibilities to quickly dissipate the plasmonic heat generated during the reaction and therefore, scaling up the plasmonic catalysis. N2 - Plasmonische Metallnanostrukturen können so eingestellt werden, dass sie effizient mit Licht interagieren, Photonen in energetische Ladungsträger und wärmeenergie umwandeln. Aus diesem Grund wirken plasmonische Nanopartikel wie Gold und Silbernanopartikel als Nanoreaktoren, wenn Moleküle mit deren Oberfläche verbunden sind. Durch das verstärkte elektromagnetische Feld und den somit erzeugten energetischen Ladungsträgern und der wärmeenergie können chemische Umwandlungen entstehen. Das bedeutet, in der plasmonischen Chemie sind Metallnanopartikel ein einzigartiges system um chemische Reaktionen auf der Nanoebene unter der Kontrolle von Licht verfolgen zu können. Die Herausforderung liegt darin, grundlegende Konzepte hinter den Reaktionen für das mechanistische Verständnis in Bezug auf die plasmonisch unterstützte Chemie zu definieren. Oberflächenverstärkte Raman Streuung (SERS) ist eine leistungsfähige Technik, die sich mit plasmonverstärkten, elektromagnetischen Feldern beschäftigt, um die Vibrationsmoden von den auf den Nanopartikeln absorbierten Molekülen zu analysieren. In dieser kumulativen Dissertation wurde die Dimerisierung von 4-Nitrothiophenol (4-NTP) mittels SERS als Beispielreaktion für die plasmonische Chemie untersucht. Aufgrund der hohen SERS Signalverstärkung konnten die SERS Spektren mit einer kurzen Erfassungszeit aufgenommen werden, was die Untersuchung der Kinetik und des Reaktionsmechanismus in Echtzeit ermöglichte. KW - plasmonic chemistry KW - plasmonische Chemie KW - heiße Elektronen KW - SERS KW - SERS Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-433304 ER - TY - GEN A1 - Schilde, Uwe A1 - Kelling, Alexandra A1 - Umbreen, Sumaira A1 - Linker, Torsten T1 - Crystal structures of three bicyclic carbohydrate derivatives N2 - The title compounds, [(1R,3R,4R,5R,6S)-4,5-bis­(acet­yloxy)-7-oxo-2-oxabi­cyclo[4.2.0]octan-3-yl]methyl acetate, C14H18O8, (I), [(1S,4R,5S,6R)-5-acet­yloxy-7-hy­droxy­imino-2-oxobi­cyclo­[4.2.0]octan-4-yl acetate, C11H15NO6, (II), and [(3aR,5R,6R,7R,7aS)-6,7-bis­(acet­yloxy)-2-oxo­octa­hydro­pyrano[3,2-b]pyrrol-5-yl]methyl acetate, C14H19NO8, (III), are stable bicyclic carbohydrate derivatives. They can easily be synthesized in a few steps from commercially available glycals. As a result of the ring strain from the four-membered rings in (I) and (II), the conformations of the carbohydrates deviate strongly from the ideal chair form. Compound (II) occurs in the boat form. In the five-membered lactam (III), on the other hand, the carbohydrate adopts an almost ideal chair conformation. As a result of the distortion of the sugar rings, the configurations of the three bicyclic carbohydrate derivatives could not be determined from their NMR coupling constants. From our three crystal structure determinations, we were able to establish for the first time the absolute configurations of all new stereocenters of the carbohydrate rings. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 296 KW - crystal structure KW - carbohydrate deriv­atives KW - conformation KW - configuration Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100833 ER - TY - GEN A1 - Schilde, Uwe A1 - Paz, Christian A1 - Ortiz, Leandro T1 - Crystal structure of erioflorin isolated from Podanthus mitiqui (L.) N2 - The title compound, erioflorin, C19H24O6 [systematic name: (1aR,3S,4Z,5aR,8aR,9R,10aR)-1a, 2,3,5a, 7,8,8a, 9,10,10a-decahydro-3-hydroxy-4,10a-dimethyl-8-methylidene-7-oxooxireno[5,6] cyclodeca[1,2-b]furan-9-yl methacrylate], is a tricyclic germacrane sesquiterpene lactone, which was isolated from Podanthus mitiqui (L.). The compound crystallizes in the space group P2(1)2(1)2(1), and its molecular structure consists of a methacrylic ester of a ten-membered ring sesquiterpenoid annelated with an epoxide and a butyrolactone. The structure is stabilized by one intramolecular C-H center dot center dot center dot O hydrogen bond. An O-H center dot center dot center dot O hydrogen bond and further C-H center dot center dot center dot O interactions can be observed in the packing. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 379 KW - Podanthus mitiqui KW - crystal structure KW - germacrane sesquiterpene lactone Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401832 ER - TY - THES A1 - Schlaad, Helmut T1 - Polymer self-assembly : adding complexity to mesostructures of diblock copolymers by specific interactions N2 - In dieser Arbeit wurde die Rolle selektiver, nicht-kovalenter Wechselwirkungen bei der Selbstorganisation von Diblockcopolymeren untersucht. Durch Einführung elektrostatischer, dipolarer Wechselwirkungen oder Wasserstoffbrückenbindungen sollte es gelingen, komplexe Mesostrukturen zu erzeugen und die Ordnung vom Nanometerbereich auf größere Längenskalen auszuweiten. Diese Arbeit ist im Rahmen von Biomimetik zu sehen, da sie Konzepte der synthetischen Polymer- und Kolloidchemie und Grundprinzipien der Strukturbildung in supramolekularen und biologischen Systemen verbindet. Folgende Copolymersysteme wurden untersucht: (i) Blockionomere, (ii) Blockcopolymere mit chelatisierenden Acetoacetoxyeinheiten und (iii) Polypeptid-Blockcopolymere. N2 - In this work, the basic principles of self-organization of diblock copolymers having the in¬herent property of selective or specific non-covalent binding were examined. By the introduction of electrostatic, dipole–dipole, or hydrogen bonding interactions, it was hoped to add complexity to the self-assembled mesostructures and to extend the level of ordering from the nanometer to a larger length scale. This work may be seen in the framework of biomimetics, as it combines features of synthetic polymer and colloid chemistry with basic concepts of structure formation applying in supramolecular and biological systems. The copolymer systems under study were (i) block ionomers, (ii) block copolymers with acetoacetoxy chelating units, and (iii) polypeptide block copolymers. T2 - Polymer self-assembly : adding complexity to mesostructures of diblock copolymers by specific interactions KW - block copolymer KW - polypeptide KW - controlled polymerization KW - self-assembly KW - specific interactions KW - micelle KW - vesicle KW - solid-state structure KW - colloids KW - Blockcopolymer KW - Polypeptid KW - kontrollierte Polymerisation KW - Selbstorganisation KW - spezifische Wechselwirkungen KW - Mizelle KW - Vesikel KW - Festkörperstruktur KW - Kol Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001824 ER - TY - GEN A1 - Schmidt, Bernd A1 - Elizarov, Nelli A1 - Berger, René A1 - Hölter, Frank T1 - Scope and limitations of the Heck–Matsuda-coupling of phenol diazonium salts and styrenes BT - a protecting-group economic synthesis of phenolic stilbenes N2 - 4-Phenol diazonium salts undergo Pd-catalyzed Heck reactions with various styrenes to 4’-hydroxy stilbenes. In almost all cases higher yields and fewer side products were observed, compared to the analogous 4-methoxy benzene diazonium salts. In contrast, the reaction fails completely with 2- and 3-phenol diazonium salts. For these substitution patterns the methoxy-substituted derivatives are superior. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 242 KW - catalyzed cross metathesis KW - o bond formation KW - arenediazonium salts KW - stereoselective-synthesis KW - arylboronic acids KW - substituted stilbenes KW - aryldiazonium salts KW - palladium catalyst KW - trans-stilbenes KW - boronic acid Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-95070 SP - 3674 EP - 3691 ER - TY - GEN A1 - Schmidt, Bernd A1 - Hauke, Sylvia T1 - Cross metathesis of allyl alcohols BT - how to suppress and how to promote double bond isomerization N2 - Under standard conditions the cross metathesis of allyl alcohols and methyl acrylate is accompanied by the formation of ketones, resulting from uncontrolled and undesired double bond isomerization. By conducting the CM in the presence of phenol, the catalyst loading and the reaction time required for quantiative conversion can be reduced, and isomerization can be suppressed. On the other hand, consecutive isomerization can be deliberately promoted by evaporating excess methyl acrylate after completing cross metathesis and by adding a base or silane as chemical triggers. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 241 KW - ring-closing metathesis KW - de-novo synthesis KW - catalyzed redox isomerization KW - carbohydrate-based oxepines KW - diels-alder reaction KW - olefin-metathesis KW - in-situ KW - ruthenium carbene KW - alkynol cycloisomerization KW - carbonyl-compounds Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-95037 SP - 4194 EP - 4206 ER - TY - THES A1 - Schmidt, Bernhard V. K. J. T1 - Polymers, self-assembly and materials BT - from polymer synthesis to applications BT - von der Polymersynthese bis zur Anwendung N2 - In der vorliegenden Arbeit wurden die Selbstorganisation von hydrophilen Polymeren, verstärkte Hydrogele, sowie anorganische/Polymer Hybridmaterialien untersucht. Dabei beschreibt die Arbeit den Weg von Polymersynthese mittels verschiedener Methoden über Polymerselbstanordnung bis zur Herstellung von Polymermaterialien mit vielversprechenden Eigenschaften für zukünftige Anwendungen. Hydrophile Polymere wurden verwendet, um Mehrphasensysteme herzustellen, Wasser-in-Wasser Emulsionen zu bilden und selbstangeordneten Strukturen zu erzeugen, z. B. Partikel/Aggregate oder hohle Strukturen aus komplett wasserlöslichen Bausteinen. Die Strukturbildung in wässriger Umgebung wurde ferner für supramolekulare Hydrogele mit definierter Unterstruktur und reversiblem Gelierungsverhalten eingesetzt. Auf dem Gebiet der Hydrogele wurde das anorganische Material graphitisches Kohlenstoffnitrid (g-CN) als Photoinitiator für die Hydrogelsynthese und als Verstärker der Gelstruktur beschrieben. Hierbei konnten Hydrogele mit herausragenden Eigenschaften generiert werden, z. B. hohe Kompressibilität, hohe Speichermodule oder Gleitfähigkeit. Die Kombinationen von g-CN mit verschiedenen Polymeren erlaubte es zudem neue Materialien für die Photokatalyse bereitzustellen. Als weiteres anorganisches Material wurden Metall-organische Gerüste (MOFs) mit Polymeren kombiniert. Es konnte gezeigt werden, dass die Verwendung von MOFs in der Polymersynthese einen starken Einfluss auf die erzeugte Polymerstruktur hat und MOFs als Katalysator für Polymerisationen verwendet werden können. Zuletzt wurde die MOF Synthese an sich untersucht, wobei Polymeradditive oder Lösungsmittel eingesetzt wurden um die kristalline Struktur der MOFs zu modulieren. Insgesamt wurden hier verschiedene Errungenschaften für die Polymerchemie beschrieben, z.B. neuartige hydrophile Polymere und Hydrogele, die zur Zeit wichtige Materialien im Polymerbereich durch ihre vielversprechenden Anwendungen im biomedizinischen Sektor darstellen. Außerdem ergab die Kombination von Polymeren mit Materialien aus anderen Bereichen der Chemie, z. B. g-CN und MOFs, neue Materialien mit bemerkenswerten Eigenschaften, die ebenfalls von Interesse für zukünftige Anwendungen sind, z. B. Beschichtungen, Partikeltechnologie und Katalyse. N2 - In the present thesis, self-assembly of hydrophilic polymers, reinforced hydrogels and inorganic/polymer hybrids were examined. The thesis describes an avenue from polymer synthesis via various methods over polymer self-assembly to the formation of polymer materials that have promising properties for future applications. Hydrophilic polymers were utilized to form multi-phase systems, water-in-water emulsions and self-assembled structures, e.g. particles/aggregates or hollow structures from completely water-soluble building blocks. The structuring of aqueous environments by hydrophilic homo and block copolymers was further utilized in the formation of supramolecular hydrogels with compartments or specific thermal behavior. Furthermore, inorganic graphitic carbon nitride (g-CN) was utilized as photoinitiator for hydrogel formation and as reinforcer for hydrogels. As such, hydrogels with remarkable mechanical properties were synthesized, e.g. high compressibility, high storage modulus or lubricity. In addition, g-CN was combined with polymers for a broad range of materials, e.g. coatings, films or latex, that could be utilized in photocatalytic applications. Another inorganic material class was combined with polymers in the present thesis as well, namely metal-organic frameworks (MOFs). It was shown that the pore structure of MOFs enables improved control over tacticity and achievement of high molar masses. Furthermore, MOF-based polymerization catalysis was introduced with improved control for coordinating monomers, catalyst recyclability and decreased metal contamination in the product. Finally, the effect of external influence on MOF morphology was studied, e.g. via solvent or polymer additives, which allowed the formation of various MOF structures. Overall, advances in several areas of polymer science are presented in here. A major topic of the thesis was hydrophilic polymers and hydrogels that currently constitute significant materials in the polymer field due to promising future applications in biomedicine. Moreover, the combination of polymers with materials from other areas of research, i.e. g-CN and MOFs, provided various new materials with remarkable properties also of interest for applications in the future, e.g. coatings, particle structures and catalysis. T2 - Polymere, Selbstanordnungen und Materialien KW - block copolymers KW - carbon nitride KW - metal-organic frameworks KW - Blockcopolymere KW - Kohlenstoffnitrid KW - Metall-organische Gerüste Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-484819 ER - TY - GEN A1 - Schmidt, Christian A1 - Behl, Marc A1 - Lendlein, Andreas A1 - Bauermann, Sabine T1 - Synthesis of high molecular weight polyglycolide in supercritical carbon dioxide N2 - Polyglycolide (PGA) is a biodegradable polymer with multiple applications in the medical sector. Here the synthesis of high molecular weight polyglycolide by ring-opening polymerization of diglycolide is reported. For the first time stabilizer free supercritical carbon dioxide (scCO2) was used as a reaction medium. scCO2 allowed for a reduction in reaction temperature compared to conventional processes. Together with the lowering of monomer concentration and consequently reduced heat generation compared to bulk reactions thermal decomposition of the product occurring already during polymerization is strongly reduced. The reaction temperatures and pressures were varied between 120 and 150 °C and 145 to 1400 bar. Tin(II) ethyl hexanoate and 1-dodecanol were used as catalyst and initiator, respectively. The highest number average molecular weight of 31 200 g mol−1 was obtained in 5 hours from polymerization at 120 °C and 530 bar. In all cases the products were obtained as a dry white powder. Remarkably, independent of molecular weight the melting temperatures were always at (219 ± 2) °C. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 284 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-99439 ER - TY - GEN A1 - Schmälzlin, Elmar A1 - Dongen, Joost T. van A1 - Klimant, Ingo A1 - Marmodée, Bettina A1 - Steup, Martin A1 - Fishahn, Joachim A1 - Geigenberger, Peter A1 - Löhmannsröben, Hans-Gerd T1 - An optical multifrequency phase-modulation method using microbeads for measuring intracellular oxygen concentrations in plants N2 - A technique has been developed to measure absolute intracellular oxygen concentrations in green plants. Oxygen-sensitive phosphorescent microbeads were injected into the cells and an optical multifrequency phase-modulation technique was used to discriminate the sensor signal from the strong autofluorescence of the plant tissue. The method was established using photosynthesis-competent cells of the giant algae Chara corallina L., and was validated by application to various cell types of other plant species. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 007 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12232 ER - TY - GEN A1 - Schmälzlin, Elmar A1 - Walz, Bernd A1 - Klimant, Ingo A1 - Schewe, Bettina A1 - Löhmannsröben, Hans-Gerd T1 - Monitoring hormone-induced oxygen consumption in the salivary glands of the blowfly, Calliphora vicina, by use of luminescent microbeads N2 - The salivary glands of the blowfly were injected with luminescent oxygen-sensitive microbeads. The changes in oxygen content within individual gland tubules during hormone-induced secretory activity were quantified. The measurements are based on an upgraded phase-modulation technique, where the phase shift of the sensor phosphorescence is determined independently from concentration and background signals. We show that the combination of a lock-in amplifier with a fluorescence microscope results in a convenient setup to measure oxygen concentrations within living animal tissues at the cellular level. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 006 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12206 ER - TY - THES A1 - Schneider, Helen T1 - Reactive eutectic media based on ammonium formate for the valorization of bio-sourced materials T1 - Reaktive eutektische Medien auf Basis von Ammoniumformiat zur Aufwertung von biobasierten Substanzen N2 - In the last several decades eutectic mixtures of different compositions were successfully used as solvents for vast amount of chemical processes, and only relatively recently they were discovered to be widely spread in nature. As such they are discussed as a third liquid media of the living cell, that is composed of common cell metabolites. Such media may also incorporate water as a eutectic component in order to regulate properties such as enzyme activity or viscosity. Taking inspiration form such sophisticated use of eutectic mixtures, this thesis will explore the use of reactive eutectic media (REM) for organic synthesis. Such unconventional media are characterized by the reactivity of their components, which means that mixture may assume the role of the solvent as well as the reactant itself. The thesis focuses on novel REM based on ammonium formate and investigates their potential for the valorization of bio-sourced materials. The use of REM allows the performance of a number of solvent-free reactions, which entails the benefits of a superior atom and energy economy, higher yields and faster rates compared to reactions in solution. This is evident for the Maillard reaction between ammonium formate and various monosaccharides for the synthesis of substituted pyrazines as well as for a Leuckart type reaction between ammonium formate and levulinic acid for the synthesis of 5-methyl-2-pyrrolidone. Furthermore, reaction of ammonium formate with citric acid for the synthesis of yet undiscovered fluorophores, shows that synthesis in REM can open up unexpected reaction pathways. Another focus of the thesis is the study of water as a third component in the REM. As a result, the concept of two different dilution regimes (tertiary REM and in REM in solvent) appears useful for understanding the influence of water. It is shown that small amounts of water can be of great benefit for the reaction, by reducing viscosity and at the same time increasing reaction yields. REM based on ammonium formate and organic acids are employed for lignocellulosic biomass treatment. The thesis thereby introduces an alternative approach towards lignocellulosic biomass fractionation that promises a considerable process intensification by the simultaneous generation of cellulose and lignin as well as the production of value-added chemicals from REM components. The thesis investigates the generated cellulose and the pathway to nanocellulose generation and also includes the structural analysis of extracted lignin. Finally, the thesis investigates the potential of microwave heating to run chemical reactions in REM and describes the synergy between these two approaches. Microwave heating for chemical reactions and the use of eutectic mixtures as alternative reaction media are two research fields that are often described in the scope of green chemistry. The thesis will therefore also contain a closer inspection of this terminology and its greater goal of sustainability. N2 - Ein eutektisches System beschreibt eine homogene Mischung verschiedener Substanzen, welche bei einer einzigen Temperatur schmilzt und dabei einen Schmelzpunkt aufweist der unterhalb der Schmelzpunkte der einzelnen Komponenten liegt. Solche Gemische können aus simplen organischen Substanzen gebildet werden und haben deshalb in den letzten Jahrzehnten große Aufmerksamkeit als neuartige Lösungsmittel erhalten. Mittlerweile wird ihr Nutzung für eine Vielzahl chemischer Prozesse erforscht. Zudem wurde Entdeckt das solche Gemische auch in der Natur Verbreitung finden. In diesem Zuge werden sie z.B. als drittes flüssiges Medium der lebenden Zelle diskutiert, welches durch eutektische Gemische von gewöhnlichen Zellmetaboliten gebildet wird. Sie können dabei auch Wasser als eutektische Komponente enthalten, um Eigenschaften wie Enzymaktivität oder Viskosität zu regulieren. Inspiriert durch diesen raffinierten Einsatz eutektischer Gemische untersucht diese Arbeit die Verwendung reaktiver eutektischer Medien (REM) für die chemische Anwendung. Solche unkonventionellen Medien zeichnen sich durch die Reaktivität ihrer Komponenten aus, was bedeutet, dass das Gemisch sowohl die Rolle des Lösungsmittels als auch des Reaktanten selbst übernehmen kann. Die Arbeit konzentriert sich auf neuartige REM auf Basis von Ammoniumformiat und untersucht deren Potenzial für die Nutzung von bio-basierten Substanzen. Die Verwendung von REM ermöglicht die Durchführung einer Reihe lösungsmittelfreier Reaktionen, was im Vergleich zu Reaktionen in Lösung die Vorteile einer besseren Atomökonomie, höhere Ausbeuten und schnellere Reaktionsgeschwindigkeiten mit sich bringt. Dies zeigt sich an der Maillard-Reaktion zwischen Ammoniumformiat und verschiedenen Monosacchariden zur Synthese substituierter Pyrazine sowie an der Leuckart-Reaktion zwischen Ammoniumformiat und Lävulinsäure zur Synthese von 5-Methyl-2-pyrrolidon. Darüber hinaus zeigt die Reaktion von Ammoniumformiat mit Zitronensäure zur Synthese noch unentdeckter Fluorophore, dass die Synthese in REM bisher unerschlossene Reaktionswege eröffnen kann. Ein weiterer Schwerpunkt der Arbeit ist die Untersuchung von Wasser als dritte Komponente im REM. Daher erscheint das Konzept zweier unterschiedlicher Verdünnungsregime (tertiäres REM und REM im Lösungsmittel) nützlich für das Verständnis des Einflusses von Wasser. Es zeigt sich, dass kleine Mengen Wasser von großem Nutzen für die Reaktion sein können, indem sie die Viskosität senken und gleichzeitig die Reaktionsausbeuten erhöhen. Für den Aufschluss von Lignocellulose werden REM auf Basis von Ammoniumformiat und organischen Säuren eingesetzt. Die Arbeit stellt damit einen neuen Ansatz für das Konzept der Bioraffinerie vor, der eine erhebliche Prozessintensivierung durch die gleichzeitige Erzeugung von Cellulose, Lignin sowie die Herstellung von Chemikalien aus REM-Komponenten verspricht. Die Arbeit untersucht die erzeugte Cellulose, sowie die Bedingungen zur Erzeugung von Nanocellulose und umfasst die Strukturanalyse von extrahiertem Lignin. Abschließend untersucht die Arbeit das Potenzial der Mikrowellenenergie zum Erhitzen chemischer Reaktionen in REM und beschreibt die Synergie zwischen diesen beiden Ansätzen. Mikrowellentechnologie für chemische Reaktionen und die Verwendung eutektischer Gemische als alternative Reaktionsmedien sind zwei Forschungsfelder, die häufig im Rahmen der Grünen Chemie beschrieben werden. Die Arbeit beinhaltet daher auch eine genauere Betrachtung dieser Terminologie und ihres übergeordneten Ziels der Nachhaltigkeit. KW - solvent-free reactions KW - deep eutectic solvents KW - microwave synthesis KW - green chemistry KW - biorefinery KW - deoxyfructosazine KW - citrazinic acid KW - Bioraffinerie KW - Citrazinsäure KW - stark eutektisches Lösungsmittel KW - Deoxyfructosazin KW - Grüne Chemie KW - Mikrowellensynthese KW - lösungsmittelfreie Synthese Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613024 ER - TY - GEN A1 - Schneider, Matthias A1 - Fritzsche, Nora A1 - Puciul-Malinowska, Agnieszka A1 - Balis, Andrzej A1 - Mostafa, Amr A1 - Bald, Ilko A1 - Zapotoczny, Szczepan A1 - Taubert, Andreas T1 - Surface etching of 3D printed poly(lactic acid) with NaOH: a systematic approach T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1212 KW - surface modification KW - sodium hydroxide etching KW - poly(lactic acid) KW - 3D printing KW - roughness KW - wettability KW - erosion Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525088 SN - 1866-8372 IS - 8 ER - TY - GEN A1 - Schneider, Matthias A1 - Günter, Christina A1 - Taubert, Andreas T1 - Co-deposition of a hydrogel/calcium phosphate hybrid layer on 3D printed poly(lactic acid) scaffolds via dip coating BT - Towards automated biomaterials fabrication T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1057 KW - 3D printing KW - dip-coating KW - poly(lactic acid) KW - PLA KW - calcium phosphate KW - gelatin KW - chitosan KW - hydrogel KW - calcium phosphate hybrid material KW - biomaterials Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-474427 SN - 1866-8372 IS - 1057 ER - TY - GEN A1 - Schneider, Ralf A1 - Weigert, Florian A1 - Lesnyak, Vladimir A1 - Leubner, Susanne A1 - Lorenz, Tommy A1 - Behnke, Thomas A1 - Dubavik, Aliaksei A1 - Joswig, Jan-Ole A1 - Resch-Genger, Ute A1 - Gaponik, Nikolai A1 - Eychmüller, Alexander T1 - pH and concentration dependence of the optical properties of thiol-capped CdTe nanocrystals in water and D2O N2 - The optical properties of semiconductor nanocrystals (SC NCs) are largely controlled by their size and surface chemistry, i.e., the chemical composition and thickness of inorganic passivation shells and the chemical nature and number of surface ligands as well as the strength of their bonds to surface atoms. The latter is particularly important for CdTe NCs, which – together with alloyed CdxHg1−xTe – are the only SC NCs that can be prepared in water in high quality without the need for an additional inorganic passivation shell. Aiming at a better understanding of the role of stabilizing ligands for the control of the application-relevant fluorescence features of SC NCs, we assessed the influence of two of the most commonly used monodentate thiol ligands, thioglycolic acid (TGA) and mercaptopropionic acid (MPA), on the colloidal stability, photoluminescence (PL) quantum yield (QY), and PL decay behavior of a set of CdTe NC colloids. As an indirect measure for the strength of the coordinative bond of the ligands to SC NC surface atoms, the influence of the pH (pD) and the concentration on the PL properties of these colloids was examined in water and D2O and compared to the results from previous dilution studies with a set of thiol-capped Cd1−xHgxTe SC NCs in D2O. As a prerequisite for these studies, the number of surface ligands was determined photometrically at different steps of purification after SC NC synthesis with Ellman's test. Our results demonstrate ligand control of the pH-dependent PL of these SC NCs, with MPA-stabilized CdTe NCs being less prone to luminescence quenching than TGA-capped ones. For both types of CdTe colloids, ligand desorption is more pronounced in H2O compared to D2O, underlining also the role of hydrogen bonding and solvent molecules. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 332 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-395143 ER - TY - GEN A1 - Schott, Juliane A1 - Kretzschmar, Jerome A1 - Acker, Margret A1 - Eidner, Sascha A1 - Kumke, Michael Uwe A1 - Drobot, Björn A1 - Barkleit, Astrid A1 - Taut, Steffen A1 - Brendler, Vinzenz A1 - Stumpf, Thorsten T1 - Formation of a Eu(III) borate solid species from a weak Eu(III) borate complex in aqueous solution N2 - In the presence of polyborates (detected by 11B-NMR) the formation of a weak Eu(III) borate complex (lg β11 ∼ 2, estimated) was observed by time-resolved laser-induced fluorescence spectroscopy (TRLFS). This complex is a precursor for the formation of a solid Eu(III) borate species. The formation of this solid in solution was investigated by TRLFS as a function of the total boron concentration: the lower the total boron concentration, the slower is the solid formation. The solid Eu(III) borate was characterized by IR spectroscopy, powder XRD and solid-state TRLFS. The determination of the europium to boron ratio portends the existence of pentaborate units in the amorphous solid. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 277 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98774 ER - TY - GEN A1 - Schuler, Benjamin A1 - Lipman, Everett A. A1 - Steinbach, Peter J. A1 - Kumke, Michael Uwe A1 - Eaton, William A. T1 - Polyproline and the "spectroscopic ruler" revisited with single-molecule fluorescence N2 - To determine whether Förster resonance energy transfer (FRET) measurements can provide quantitative distance information in single-molecule fluorescence experiments on polypeptides, we measured FRET efficiency distributions for donor and acceptor dyes attached to the ends of freely diffusing polyproline molecules of various lengths. The observed mean FRET efficiencies agree with those determined from ensemble lifetime measurements but differ considerably from the values expected from Förster theory, with polyproline treated as a rigid rod. At donor–acceptor distances much less than the Förster radius R0, the observed efficiencies are lower than predicted, whereas at distances comparable to and greater than R0, they are much higher. Two possible contributions to the former are incomplete orientational averaging during the donor lifetime and, because of the large size of the dyes, breakdown of the point-dipole approximation assumed in Förster theory. End-to-end distance distributions and correlation times obtained from Langevin molecular dynamics simulations suggest that the differences for the longer polyproline peptides can be explained by chain bending, which considerably shortens the donor–acceptor distances. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 008 KW - Förster resonance energy transfer KW - molecular dynamics KW - polypeptide KW - FRET Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12229 ER - TY - GEN A1 - Schulze, Michael A1 - Utecht, Manuel Martin A1 - Moldt, Thomas A1 - Przyrembel, Daniel A1 - Gahl, Cornelius A1 - Weinelt, Martin A1 - Saalfrank, Peter A1 - Tegeder, Petra T1 - Nonlinear optical response of photochromic azobenzene-functionalized self-assembled monolayers N2 - The combination of photochromic and nonlinear optical (NLO) properties of azobenzene-functionalized self-assembled monolayers (SAMs) constitutes an intriguing step towards novel photonic and optoelectronic devices. By utilizing the second-order NLO process of second harmonic generation (SHG), supported by density-functional theory and correlated wave function method calculations, we demonstrate that the photochromic interface provides the necessary prerequisites en route towards possible future technical applications: we find a high NLO contrast on the order of 16% between the switching states. These are furthermore accessible reversibly and with high efficiencies in terms of cross sections on the order of 10−18 cm2 for both photoisomerization reactions, i.e., drivable by means of low-power LED light sources. Finally, both photostationary states (PSSs) are thermally stable at ambient conditions. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 196 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81198 ER - TY - GEN A1 - Schulze, Nicole A1 - Koetz, Joachim T1 - Kinetically Controlled Growth of Gold Nanotriangles in a Vesicular Template Phase by Adding a Strongly Alternating Polyampholyte N2 - This paper is focused on the temperature dependent synthesis of gold nanotriangles in a vesicular template phase, containing phosphatidylcholin and AOT, by adding the strongly alternating polyampholyte PalPhBisCarb. UV-vis absorption spectra in combination with TEM micrographs show that flat gold nanoplatelets are formed predominantly in presence of the polyampholyte at 45 °C. The formation of triangular and hexagonal nanoplatelets can be directly influenced by the kinetic approach, i.e., by varying the polyampholyte dosage rate at 45 °C. Corresponding zeta potential measurements indicate that a temperature dependent adsorption of the polyampholyte on the {111} faces will induce the symmetry breaking effect, which is responsible for the kinetically controlled hindered vertical and preferred lateral growth of the nanoplatelets. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 271 KW - Polyampholytes KW - Nanotriangles KW - Kinetically controlled nanocrystal growth Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98380 ER - TY - GEN A1 - Schulze, Sven A1 - Wehrhold, Michel A1 - Hille, Carsten T1 - Femtosecond-pulsed laser written and etched fiber bragg gratings for fiber-optical biosensing T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We present the development of a label-free, highly sensitive fiber-optical biosensor for online detection and quantification of biomolecules. Here, the advantages of etched fiber Bragg gratings (eFBG) were used, since they induce a narrowband Bragg wavelength peak in the reflection operation mode. The gratings were fabricated point-by-point via a nonlinear absorption process of a highly focused femtosecond-pulsed laser, without the need of prior coating removal or specific fiber doping. The sensitivity of the Bragg wavelength peak to the surrounding refractive index (SRI), as needed for biochemical sensing, was realized by fiber cladding removal using hydrofluoric acid etching. For evaluation of biosensing capabilities, eFBG fibers were biofunctionalized with a single-stranded DNA aptamer specific for binding the C-reactive protein (CRP). Thus, the CRP-sensitive eFBG fiber-optical biosensor showed a very low limit of detection of 0.82 pg/L, with a dynamic range of CRP detection from approximately 0.8 pg/L to 1.2 µg/L. The biosensor showed a high specificity to CRP even in the presence of interfering substances. These results suggest that the proposed biosensor is capable for quantification of CRP from trace amounts of clinical samples. In addition, the adaption of this eFBG fiber-optical biosensor for detection of other relevant analytes can be easily realized. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1073 KW - fiber Bragg gratings KW - ultra-fast laser inscription KW - fiber etching KW - nanostructure fabrication KW - fiber-optical sensors KW - aptamers KW - C-reactive Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-472692 SN - 1866-8372 IS - 1073 ER - TY - THES A1 - Schumacher, Soeren T1 - Saccharide recognition : boronic acids as receptors in polymeric networks T1 - Zuckererkennung in polymeren Netzwerken mittels Boronsäuren als Rezeptoren N2 - In this thesis entitled “Saccharide Recognition - Boronic acids as Receptors in Polymeric Networks” different aspects of boronic acid synthesis, their analysis and incorporation or attachment to different polymeric networks and characterisation thereof were investigated. The following key aspects were considered: • Provision of a variety of different characterised arylboronic acids and benzoboroxoles • Attachment of certain derivatives to nanoparticles and the characterisation of saccharide binding by means of isothermal titration calorimetry and displacement assay (ARS) to enhance the association constant to saccharides at pH 7.4 • Enhancement of selectivity in polymeric systems by means of molecular imprinting using fructose as template and a polymerisable benzoboroxole as functional monomer for the recognition at pH 7.4 (Joined by a diploma thesis of F. Grüneberger) • Development of biomimetic saccharide structures and the development of saccharide (especially glucose and fructose) binding MIPs by using these structures as template molecules. In the first part of the thesis different arylboronic acid derivatives were synthesised and their binding to glucose or fructose was investigated by means of isothermal titration calorimetry (ITC). It could be derived, which is in parallel to the literature, that derivatives bearing a methylhydroxyl-group in ortho-position to the boron (benzoboroxole) exhibit in most cases a two-fold higher association constant compared to the corresponding phenylboronic acid derivative. To gain a deeper understanding NMR spectroscopy and mass spectrometry with the benzoboroxole and glucose or fructose was performed. It could be shown that the exchange rate in terms of NMR time scale is quite slow since in titration experiments new peaks appeared. Via mass spectrometry of a mixture between benzoboroxole and glucose or fructose, different binding stoichiometries could be detected showing that the binding of saccharides is comparable with their binding to phenylboronic acid. In addition, the use of Alizarin Red S as an electrochemical reporter was described for the first time to monitor the saccharide binding to arylboronic acids not only with spectroscopy. Here, the redox behaviour and the displacement were recorded by cyclic voltammograms. In the second part different applications of boronic acids in polymeric networks were investigated. The attachment of benzoboroxoles to nanoparticles was investigated and monitored by means of isothermal titration calorimetry and a colourimetric assay with Alizarin Red S as the report dye. The investigations by isothermal titration calorimetry compared the fructose binding of arylboronic acids and benzoboroxoles coupled to these nanoparticles and “free” in solution. It could be shown that the attached derivatives showed a higher binding constant due to an increasing entropy term. This states for possible multivalent binding combined with a higher water release. Since ITC could not characterise the binding of glucose to these nanoparticles due to experimental restrictions the glucose binding at pH 7.4 was shown with ARS. Here, the displacement of ARS by fructose and also glucose could be followed and consequently these nanoparticles can be used for saccharide determination. Within this investigation also the temperature stability of these nanoparticles was examined and after normal sterilisation procedures (121°C, 20 min.) the binding behaviour was still unchanged. To target the selectivity of the used polymeric networks, molecular imprinting was used as a technique for creating artificial binding pockets on a molecular scale. As functional monomer 3-methacrylamidobenzoboroxole was introduced for the recognition of fructose. In comparison to polymers prepared with vinylphenylboronic acid the benzoboroxole containing polymer had a stronger binding at pH 7.4 which was shown for the first time. In addition, another imprinted polymer was synthesised especially for the recognition of glucose and fructose employing biomimetic saccharide analogues as template molecule. The advantage to use the saccharide analogues is the defined template-functional monomer complex during the polymerisation which is not the case, for example, for glucose-boronic acid interaction. The biomimetic character was proven through structural superimposition of crystal structures of the analogues with already described crystal structures of boronic acid esters of glucose and fructose. A molecularly imprinted polymer was synthesised with vinylphenylboronic acid as the functional monomer to show that both glucose and fructose are able to bind to the polymer which was predicted by the structural similarity of the analogues. The major scientific contributions of this thesis are • the determination of binding constants for some, not yet reported saccharide – boronic acid / benzoboroxole pairs, • the use of ARS as electrochemical reporter for saccharide detection, • the thermodynamic characterisation of a saccharide binding nanoparticle system containing benzoboroxole and functioning at pH 7.4, • the use of a polymerisable benzoboroxole as functional monomer for saccharide recognition in neutral, aqueous environments • and the synthesis and utilisation of biomimetic saccharide analogues as template molecules especially for the development of a glucose binding MIP. N2 - Die vorliegende Arbeit beschäftigte sich mit der Synthese verschiedener Boronsäurederivate und deren Charakterisierung und Anbindung oder Einbau in polymeren Netzwerken. Die synthetisierten Polymere werden charakterisiert bezüglich ihrer Morphologie und besonders hinsichtlich ihrer Saccharidbindung. Im Wesentlichen wurden die folgenden Aspekte bearbeitet: • Bereitstellung einer Reihe von verschiedenen Arylboronsäuren und Benzoboroxolderivaten • Modifizierung von Nanopartikeln mit verschiedenen Derivaten aus der Bibliothek mit dem Ziel die Bindingkonstanten zu Monosacchariden bei pH 7.4. zu erhöhen. Dabei werden isothermale Titrationskalorimetrie und ein spektroskopischer Verdrängungsassay (Alizarin Rot S) zum Bindungsnachweis verwendet. • Erhöhung der Selektivität von Polymeren mittels molekularen Prägens von Fruktose als Matrizenmolekül. Durch den Einsatz eines polymerisierbaren Benzoboroxolderivatives konnte die Anbindung bei pH 7.4 stattfinden (Dieser Teil der Arbeit wurde durch eine Diplomarbeit von F. Grüneberger unterstützt). • Entwicklung von biomimetischen saccharidanalogen Strukturen, die als Matrizenmoleküle während des molekularen Prägens eingesetzt werden, um ein Polymer für die Anbindung von Monosacchariden wie etwa Fruktose oder Glukose zu generieren. Im ersten Teil der Arbeit wurde die Synthese und Charakterisierung von verschiedenen Boronsäurederivaten beschrieben. Die Charakterisierung der Bindungskonstanten wurde mittels isothermaler Titrationskalorimetrie durchgeführt. Dabei konnte im Einklang mit der Literatur gezeigt werden, dass Derivative, die zusätzlich mit einer Methylhydroxygruppe in ortho-Position zum Bor (Benzoboroxol) derivatisiert sind, eine meist zweifach höhere Bindungskonstante als gleich substituierte Arylboronsäurederivate aufweisen. Durch 1H-NMR-Spektroskopie und Massenspektrometrie mit Benzoboroxol und Glukose oder Fruktose konnten die Bindung weiter charakterisiert werden. Dabei zeigten die Ergebnisse der 1H-NMR-Spektroskopie, dass die Bindung bezogen auf NMR-Zeitskalen recht langsam stattfindet, da es zu einer Verbreiterung der Peaks kommt. Die Ergebnisse der Massenspektrometrie zeigen, dass hinsichtlich der Stöchiometrie der Binding verschiedene Komplexe möglich sind, was in ähnlicher Weise für Phenylboronsäure schon gezeigt wurde. Zusätzlich wurde in diesem Teil der Arbeit wurde die Elektrochemie von Alizarin Rot S untersucht, um den Farbstoff, der spektroskopisch schon für den Bindungsnachweis zwischen einem Boronsäurederivat und verschiedenen Zuckern beschrieben ist, auch elektrochemisch zu nutzen. Im zweiten Teil der Arbeit wurden verschiedene Anwendungen von den charakterisierten Boronsäuren in polymeren Netzwerken beschrieben. Dabei wurde zunächst ein Polystyrollatex mit Benzoboroxol modifiziert und die Bindung von Glukose oder Fruktose mittels isothermaler Titrationskalorimetrie und einem spektroskopischen Farbassay untersucht. Die Untersuchungen mittels isothermaler Titrationskalorimetrie (ITC) wurden vergleichend zu frei in Lösung befindlichem Benzoboroxol durchgeführt. Es wurde eine höhere Bindungskonstante für die modifizierten Nanopartikel ermittelt, was auf die Erhöhung der Entropie im System zurückzuführen ist. Dies kann durch eine mutivalente Bindung und einer einhergehenden erhöhten Wasserfreisetzung erklärt werden. Da es nicht möglich war, die Glukosebindung mittels ITC zu verfolgen, wurde zusätzlich ein spektroskopischer Assay bei pH 7.4. durchgeführt. Bei diesem wird die Bindung von Fruktose oder Glukose durch Freisetzung von Alizarin Rot S verfolgt. In diesem Zusammenhang konnte auch gezeigt werden, dass die Nanopartikel nach Sterilisation bei 121°C für 20 Minuten eine vergleichbare Bindung des Farbstoffes zeigen, was die Temperaturstabilität der Partikel unterstreicht. Da in diesem System die Bindung von Zuckern abhängig von der Affinität der Zucker zu den Boronsäuren bestimmt wird, wurden molekular geprägte Polymere synthetisiert, die eine Selektivität für bestimmte Zucker zeigen. Als Funktionsmonomer wurde 3-Methacrylamidobenzboroxol verwendet. Im Vergleich zu Polymeren, die mit 3-Vinylphenylboronsäure als literaturbekanntes Funktionsmonomer synthetisiert worden sind, zeigt sich bei pH 7.4 eine höhere Bindung von Fruktose an Benzoboroxolpolymere. In einem anderen geprägten Polymer wurden biomimetische (zuckeranaloge) Substanzen als Matrizenmolekül verwendet. Der Vorteil dieser Substanz ist die Bildung eines definierten Boronsäureesters, der als Templat-Funktionsmonomerkomplexes einpolymerisiert wird. Im Gegensatz dazu weist beispielsweise ein Boronsäureester der Glukose keine definierte Struktur auf. Der biomimetische Charakter wurde durch strukturelle Überlagerung mit schon publizierten Kristallstrukturen von Boronsäureestern von Glukose und Fruktose gezeigt. Das zugehörige molekular geprägte Polymer wurde mit Vinylphenylboronsäure synthetisiert und zeigt eine Bindung von Glukose und Fruktose, was durch die Strukturüberlagerungen vorhergesagt wurde. Zusammenfassend sind die wesentlichen wissenschaftlichen Ergebnisse: • Bindungskostanten von neuen Zucker-Benzoboroxolpaaren, • Eignung von ARS als elektrochemische Nachweissubstanz der Saccharidbindung • Die thermodynamische Charakterisierung der Bindung von Fruktose oder Glukose an Nanopartikel, die Benzoboroxol - modifziert sind und so bei pH 7.4 Zucker binden können • Einsatz von Benzoboroxol als Funktionsmonomer • die Synthese und Nutzung von biomimetischen zuckeranalogen Matrizenmolekülen für die Entwicklung von molekular geprägten Polymeren für die Glukosebindung. KW - Zuckererkennung KW - Glucose KW - physiolgischer pH KW - Boronsäure KW - Benzoboroxol KW - Saccharide Recognition KW - Glucose KW - physiological pH KW - boronic acid KW - benzoboroxole Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52869 ER - TY - THES A1 - Schutjajew, Konstantin T1 - Electrochemical sodium storage in non-graphitizing carbons - insights into mechanisms and synthetic approaches towards high-energy density materials T1 - Elektrochemische Natriumspeicherung in nicht-graphitisierbaren Kohlenstoffen - Untersuchungen zu Mechanismen und synthetische Ansätze für die Darstellung von Materialien mit hohen Energiedichten N2 - To achieve a sustainable energy economy, it is necessary to turn back on the combustion of fossil fuels as a means of energy production and switch to renewable sources. However, their temporal availability does not match societal consumption needs, meaning that renewably generated energy must be stored in its main generation times and allocated during peak consumption periods. Electrochemical energy storage (EES) in general is well suited due to its infrastructural independence and scalability. The lithium ion battery (LIB) takes a special place, among EES systems due to its energy density and efficiency, but the scarcity and uneven geological occurrence of minerals and ores vital for many cell components, and hence the high and fluctuating costs will decelerate its further distribution. The sodium ion battery (SIB) is a promising successor to LIB technology, as the fundamental setup and cell chemistry is similar in the two systems. Yet, the most widespread negative electrode material in LIBs, graphite, cannot be used in SIBs, as it cannot store sufficient amounts of sodium at reasonable potentials. Hence, another carbon allotrope, non-graphitizing or hard carbon (HC) is used in SIBs. This material consists of turbostratically disordered, curved graphene layers, forming regions of graphitic stacking and zones of deviating layers, so-called internal or closed pores. The structural features of HC have a substantial impact of the charge-potential curve exhibited by the carbon when it is used as the negative electrode in an SIB. At defects and edges an adsorption-like mechanism of sodium storage is prevalent, causing a sloping voltage curve, ill-suited for the practical application in SIBs, whereas a constant voltage plateau of relatively high capacities is found immediately after the sloping region, which recent research attributed to the deposition of quasimetallic sodium into the closed pores of HC. Literature on the general mechanism of sodium storage in HCs and especially the role of the closed pore is abundant, but the influence of the pore geometry and chemical nature of the HC on the low-potential sodium deposition is yet in an early stage. Therefore, the scope of this thesis is to investigate these relationships using suitable synthetic and characterization methods. Materials of precisely known morphology, porosity, and chemical structure are prepared in clear distinction to commonly obtained ones and their impact on the sodium storage characteristics is observed. Electrochemical impedance spectroscopy in combination with distribution of relaxation times analysis is further established as a technique to study the sodium storage process, in addition to classical direct current techniques, and an equivalent circuit model is proposed to qualitatively describe the HC sodiation mechanism, based on the recorded data. The obtained knowledge is used to develop a method for the preparation of closed porous and non-porous materials from open porous ones, proving not only the necessity of closed pores for efficient sodium storage, but also providing a method for effective pore closure and hence the increase of the sodium storage capacity and efficiency of carbon materials. The insights obtained and methods developed within this work hence not only contribute to the better understanding of the sodium storage mechanism in carbon materials of SIBs, but can also serve as guidance for the design of efficient electrode materials. N2 - Eine nachhaltige Energiewirtschaft kann nur durch die Abkehr von fossilen Brennstoffen als Energiequellen und den ausschließlichen Einsatz erneuerbarer Quellen für die Energieerzeugung erreicht werden. Da diese jedoch naturgemäß nur diskontinuierlich zur Verfügung stehen und sich die tageszeitliche Verfügbarkeit kaum mit dem Bedarf deckt, muss erneuerbar gewonnene Energie zwischengespeichert werden. Dies kann mittels elektrochemischer Energiespeicher geschehen, wobei sich die Lithium-Ionen-Batterie (LIB) aufgrund ihrer hohen Energiedichte und Effizienz besonders dafür eignet. Da jedoch Ressourcen, welche für entscheidende Zellkomponenten der LIB benötigt werden, knapper werden und oft in geopolitisch komplizierten Regionen vorkommen, muss auch dafür eine Alternative gefunden werden. Die Natrium-Ionen-Batterie (NIB) bietet sich als Nachfolger für LIBs an, da sich die Zellchemie der beiden Systeme ähnelt und somit Kenntnisse direkt aus der LIB-Forschung übernommen werden können. Es erweist sich allerdings als problematisch, dass das kommerziell wichtigste negative Elektrodenmaterial in LIBs, Graphit, nicht für die Anwendung in NIBs eignet und daher eine andere Kohlenstoffmodifikation, sogenannter nicht-graphitisierbarer Kohlenstoff, oder aus dem Englischen hard carbon (HC), verwendet werden muss. HC ist durch eine besondere Art der Fehlordnung geprägt und besteht im Wesentlichen aus Regionen, in denen die Kohlenstoffschichten parallel zueinander verlaufen und aus Regionen, in denen die Schichten innere Hohlräume, sogenannte geschlossene Poren bilden. Die Lade-Entladekurve von HCs ist geprägt von diesen Strukturmerkmalen, sodass sie in einen linear-abflachenden, aus dem Englischen sloping Bereich, und einen Plateaubereich unterteilt werden kann. Die Speicherung im für Energieanwendungen relevanteren Plateaubereich erfolgt durch Abscheidung quasimetallischer Natriumstrukturen in eingangs erwähnten geschlossenen Poren, bei geringen, konstanten Spannungen, wie zahlreiche Forschungsarbeiten unter Berufung auf verschiedene Strukturcharakterisierungsmethoden � uberzeugend nahelegen. Jedoch ist über den Einfluss der Größe und Form der geschlossenen Poren sowie derer chemischer Eigenschaften auf die Natriumspeicherung nur wenig bekannt. Eben diese Fragestellung soll in der vorliegenden Arbeit behandelt werden. Durch die Herstellung von Materialien mit genau definierter und bekannter Morphologie, Porenstruktur sowie chemischer Beschaffenheit wird die Bedeutung dieser Merkmale für die Natriumabscheidung bei geringen Potentialen beleuchtet. Mittels elektrochemischer Impedanzspektroskopie wird desweiteren der Natriumspeichermechanismus detailliert untersucht und die Kinetik der reversiblen Natriumspeicherung mit der der irreversiblen Metallabscheidung verglichen, wobei eine bemerkenswerte Ähnlichkeit der beiden Prozesse zu beobachten ist. Abschließend ist die gezielte Herstellung geschlossenporiger Materialien aus offenporigen Vorläufermaterialien gelungen, welche es nicht nur ermöglicht, geschlossen- und offenporige Materialien ansonsten gleicher Porenstruktur zu vergleichen und die Notwendigkeit geschlossener Poren nachzuweisen, sondern auch die Speicherkapazität und Effizienz der Elektrodenmaterialien zu erhöhen. Insgesamt tragen die im Rahmen der vorliegenden Dissertation gewonnenen Erkenntisse nicht nur zum tiefergehenden Verständnis des Natriumspeichermechanismus in HCs bei, sondern es werden auch synthetische und analytische Methoden vorgestellt, die der weiteren Forschung auf diesem Gebiet dienen werden. KW - sodium-ion batteries KW - energy storage KW - carbon KW - Natrium-Ionen-Akkumulator KW - Energiespeicher KW - Kohlenstoff Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-541894 ER - TY - GEN A1 - Schwarze, Thomas A1 - Müller, Holger A1 - Ast, Sandra A1 - Steinbrück, Dörte A1 - Eidner, Sascha A1 - Geißler, Felix A1 - Kumke, Michael Uwe A1 - Holdt, Hans-Jürgen T1 - Fluorescence lifetime-based sensing of sodium by an optode N2 - We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1–10 mM by measuring reversible fluorescence decay time changes. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 182 KW - ion optodes KW - sensors KW - indicators KW - chromoionophore KW - ionophore KW - membrane KW - switches KW - systems KW - samples KW - green Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-76785 SP - 14167 EP - 14170 PB - The Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Schwarze, Thomas A1 - Riemer, Janine A1 - Müller, Holger A1 - John, Leonard A1 - Holdt, Hans‐Jürgen A1 - Wessig, Pablo T1 - Na+ Selective Fluorescent Tools Based on Fluorescence Intensity Enhancements, Lifetime Changes, and on a Ratiometric Response T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Over the years, we developed highly selective fluorescent probes for K+ in water, which show K+-induced fluorescence intensity enhancements, lifetime changes, or a ratiometric behavior at two emission wavelengths (cf. Scheme 1, K1-K4). In this paper, we introduce selective fluorescent probes for Na+ in water, which also show Na+ induced signal changes, which are analyzed by diverse fluorescence techniques. Initially, we synthesized the fluorescent probes 2, 4, 5, 6 and 10 for a fluorescence analysis by intensity enhancements at one wavelength by varying the Na+ responsive ionophore unit and the fluorophore moiety to adjust different K-d values for an intra- or extracellular Na+ analysis. Thus, we found that 2, 4 and 5 are Na+ selective fluorescent tools, which are able to measure physiologically important Na+ levels at wavelengths higher than 500 nm. Secondly, we developed the fluorescent probes 7 and 8 to analyze precise Na+ levels by fluorescence lifetime changes. Herein, only 8 (K-d=106 mm) is a capable fluorescent tool to measure Na+ levels in blood samples by lifetime changes. Finally, the fluorescent probe 9 was designed to show a Na+ induced ratiometric fluorescence behavior at two emission wavelengths. As desired, 9 (K-d=78 mm) showed a ratiometric fluorescence response towards Na+ ions and is a suitable tool to measure physiologically relevant Na+ levels by the intensity change of two emission wavelengths at 404 nm and 492 nm. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1136 KW - crown compounds KW - fluorescence lifetime KW - fluorescent probes KW - ratiometric KW - sodium Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-437482 SN - 1866-8372 IS - 1136 ER - TY - GEN A1 - Schäfer-Bung, Boris A1 - Nest, Mathias T1 - Correlated dynamics of electrons with reduced two-electron density matrices N2 - We present an approach to the correlated dynamics of many-electron systems. We show, that the twoelectron reduced density matrix (2RDM) can provide a suitable description of the real time evolution of a system. To achieve this, the hierarchy of equations of motion must be truncated in a practical way. Also, the computational effort, given that the 2RDM is represented by products of two-electron determinants, is discussed, and numerical model calculations are presented. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 100 Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-41774 SN - 1866-8372 ER - TY - GEN A1 - Schönborn, Jan Boyke A1 - Hartke, Bernd T1 - Photochemical dynamics of E-methylfurylfulgide BT - kinematic effects on photorelaxation dynamics of furylfulgides N2 - With the present theoretical study of the photochemical switching of E-methylfurylfulgide we contribute an important step towards the understanding of the photochemical processes in furylfulgide-related molecules. We have carried out large-scale, full-dimensional direct semiempirical configuration-interaction surface-hopping dynamics of the photoinduced ring-closure reaction. Simulated static and dynamical UV/Vis-spectra show good agreement with experimental data of the same molecule. By a careful investigation of our dynamical data, we were able to identify marked differences to the dynamics of the previously studied E-isopropylfurylfulgide. With our simulations we can not only reproduce the experimentally observed quantum yield differences qualitatively but we can also pinpoint two reasons for them: kinematics and pre-orientation. With our analysis, we thus offer straightforward molecular explanations for the high sensitivity of the photodynamics towards seemingly minor changes in molecular constitution. Beyond the realm of furylfulgides, these insights provide additional guidance to the rational design of photochemically switchable molecules. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 237 KW - decay dynamics KW - fulgides KW - implementation KW - molecular-dynamics KW - photoinduced nonadiabatic dynamics KW - photoisomerization KW - ring-closure KW - semiempirical methods KW - spectroscopy KW - state Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94516 SP - 2483 EP - 2490 ER - TY - GEN A1 - Schönemann, Eric A1 - Koc, Julian A1 - Aldred, Nick A1 - Clare, Anthony S. A1 - Laschewsky, André A1 - Rosenhahn, Axel A1 - Wischerhoff, Erik T1 - Synthesis of novel sulfobetaine polymers with differing dipole orientations in their side chains, and their effects on the antifouling properties T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The impact of the orientation of zwitterionic groups, with respect to the polymer backbone, on the antifouling performance of thin hydrogel films made of polyzwitterions is explored. In an extension of the recent discussion about differences in the behavior of polymeric phosphatidylcholines and choline phosphates, a quasi-isomeric set of three poly(sulfobetaine methacrylate)s is designed for this purpose. The design is based on the established monomer 3-[N-2-(methacryloyloxy)ethyl-N,N-dimethyl]ammonio-propane-1-sulfonate and two novel sulfobetaine methacrylates, in which the positions of the cationic and the ionic groups relative to the polymerizable group, and thus also to the polymer backbone, are altered. The effect of the varied segmental dipole orientation on their water solubility, wetting behavior by water, and fouling resistance is compared. As model systems, the adsorption of the model proteins bovine serum albumin (BSA), fibrinogen, and lysozyme onto films of the various polyzwitterion surfaces is studied, as well as the settlement of a diatom (Navicula perminuta) and barnacle cyprids (Balanus improvisus) as representatives of typical marine fouling communities. The results demonstrate the important role of the zwitterionic group's orientation on the polymer behavior and fouling resistance T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1184 KW - antifouling KW - coatings KW - crosslinking KW - hydrophilic polymers KW - polyzwitterions Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-524820 SN - 1866-8372 IS - 1 ER - TY - GEN A1 - Schönemann, Eric A1 - Laschewsky, André A1 - Rosenhahn, Axel T1 - Exploring the long-term hydrolytic behavior of zwitterionic polymethacrylates and polymethacrylamides T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) (“sulfobetaine methacrylate”), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) (“sulfobetaine methacrylamide”) as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by ¹H NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1091 KW - polyzwitterions KW - stability KW - polymer degradation KW - hydrolysis KW - polysulfobetaine KW - polysulfabetaine KW - anti-fouling materials Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473052 SN - 1866-8372 IS - 1091 ER - TY - THES A1 - Schürings, Marco Philipp Hermann T1 - Synthesis of 1D microgel strands and their motion analysis in solution T1 - Synthese von 1D-Mikrogelsträngen und ihre Bewegungsanalyse in der Lösung N2 - The fabrication of 1D nanostrands composed of stimuli responsive microgels has been shown in this work. Microgels are well known materials able to respond to various stimuli from outer environment. Since these microgels respond via a volume change to an external stimulus, a targeted mechanical response can be achieved. Through carefully choosing the right composition of the polymer matrix, microgels can be designed to react precisely to the targeted stimuli (e.g. drug delivery via pH and temperature changes, or selective contractions through changes in electrical current125). In this work, it was aimed to create flexible nano-filaments which are capable of fast anisotropic contractions similar to muscle filaments. For the fabrication of such filaments or strands, nanostructured templates (PDMS wrinkles) were chosen due to a facile and low-cost fabrication and versatile tunability of their dimensions. Additionally, wrinkling is a well-known lithography-free method which enables the fabrication of nanostructures in a reproducible manner and with a high long-range periodicity. In Chapter 2.1, it was shown for the first time that microgels as soft matter particles can be aligned to densely packed microgel arrays of various lateral dimensions. The alignment of microgels with different compositions (e.g. VCL/AAEM, NIPAAm, NIPAAm/VCL and charged microgels) was shown by using different assembly techniques (e.g. spin-coating, template confined molding). It was chosen to set one experimental parameter constant which was the SiOx surface composition of the templates and substrates (e.g. oxidized PDMS wrinkles, Si-wafers and glass slides). It was shown that the fabrication of nanoarrays was feasible with all tested microgel types. Although the microgels exhibited different deformability when aligned on a flat surface, they retained their thermo-responsivity and swelling behavior. Towards the fabrication of 1D microgel strands interparticle connectivity was aspired. This was achieved via different cross-linking methods (i.e. cross-linking via UV-irradiation and host-guest complexation) discussed in Chapter 2.2. The microgel arrays created by different assembly methods and microgel types were tested for their cross-linking suitability. It was observed that NIPAAm based microgels cannot be cross-linked with UV light. Furthermore, it was found that these microgels exhibit a strong surface-particle-interaction and therefore could not be detached from the given substrates. In contrast to the latter, with VCL/AAEM based microgels it was possible to both UV cross-link them based on the keto-enol tautomerism of the AAEM copolymer, and to detach them from the substrate due to the lower adhesion energy towards SiOx surfaces. With VCL/AAEM microgels long, one-dimensional microgel strands could be re-dispersed in water for further analysis. It has also been shown that at least one lateral dimension of the free dispersed 1D microgel strands is easily controllable by adjusting the wavelength of the wrinkled template. For further work, only VCL/AAEM based microgels were used to focus on the main aim of this work, i.e. the fabrication of 1D microgel nanostrands. As an alternative to the unspecific and harsh UV cross-linking, the host-guest complexation via diazobenzene cross-linkers and cyclodextrin hosts was explored. The idea behind this approach was to give means to a future construction kit-like approach by incorporation of cyclodextrin comonomers in a broad variety of particle systems (e.g. microgels, nanoparticles). For this purpose, VCL/AAEM microgels were copolymerized with different amounts of mono-acrylate functionalized β-cyclodextrin (CD). After successfully testing the cross-linking capability in solution, the cross-linking of aligned VCL/AAEM/CD microgels was tried. Although the cross-linking worked well, once the single arrays came into contact to each other, they agglomerated. As a reason for this behavior residual amounts of mono-complexed diazobenzene linkers were suspected. Thus, end-capping strategies were tried out (e.g. excess amounts of β-cyclodextrin and coverage with azobenzene functionalized AuNPs) but were unsuccessful. With deeper thought, entropy effects were taken into consideration which favor the release of complexed diazobenzene linker leading to agglomerations. To circumvent this entropy driven effect, a multifunctional polymer with 50% azobenzene groups (Harada polymer) was used. First experiments with this polymer showed promising results regarding a less pronounced agglomeration (Figure 77). Thus, this approach could be pursued in the future. In this chapter it was found out that in contrast to pearl necklace and ribbon like formations, particle alignment in zigzag formation provided the best compromise in terms of stability in dispersion (see Figure 44a and Figure 51) while maintaining sufficient flexibility. For this reason, microgel strands in zigzag formation were used for the motion analysis described in Chapter 2.3. The aim was to observe the properties of unrestrained microgel strands in solution (e.g. diffusion behavior, rotational properties and ideally, anisotropic contraction after temperature increase). Initially, 1D microgel strands were manipulated via AFM in a liquid cell setup. It could be observed that the strands required a higher load force compared to single microgels to be detached from the surface. However, with the AFM it was not possible to detach the strands in a controllable manner but resulted in a complete removal of single microgel particles and a tearing off the strands from the surface, respectively. For this reason, to observe the motion behavior of unrestrained microgel strands in solution, confocal microscopy was used. Furthermore, to hinder an adsorption of the strands, it was found out that coating the surface of the substrates with a repulsive polymer film was beneficial. Confocal and wide-field microscopy videos showed that the microgel strands exhibit translational and rotational diffusive motion in solution without perceptible bending. Unfortunately, with these methods the detection of the anisotropic stimuli responsive contraction of the free moving microgel strands was not possible. To summarize, the flexibility of microgel strands is more comparable to the mechanical behavior of a semi flexible cable than to a yarn. The strands studied here consist of dozens or even hundreds of discrete submicron units strung together by cross-linking, having few parallels in nanotechnology. With the insights gained in this work on microgel-surface interactions, in the future, a targeted functionalization of the template and substrate surfaces can be conducted to actively prevent unwanted microgel adsorption for a given microgel system (e.g. PVCL and polystyrene coating235). This measure would make the discussed alignment methods more diverse. As shown herein, the assembly methods enable a versatile microgel alignment (e.g. microgel meshes, double and triple strands). To go further, one could use more complex templates (e.g. ceramic rhombs and star shaped wrinkles (Figure 14) to expand the possibilities of microgel alignment and to precisely control their aspect ratios (e.g. microgel rods with homogeneous size distributions). N2 - In dieser Arbeit wurde die Herstellung von Nanostrukturen aus stimuli-responsiven Mikrogelen gezeigt. Mikrogele sind bekannt dafür auf verschiedene Reize aus der Umgebung reagieren zu können, so werden sie z.B. in der Industrie seit langem als Superabsorber eingesetzt. Da diese Mikrogele über eine Volumenäderung auf den externen Reiz reagieren, kann so eine gezielte mechanische Antwort erreicht werden. Durch eine sorgfältige Auswahl der Polymermatrix ist es möglich die Mikrogele so zu gestalten, dass sie präzise auf die gesetzten Stimuli reagieren (z.B. Wirkstoffabgabe über pH- und Temperaturänderungen oder selektive Kontraktionen durch Zufuhr von elektrischem Strom). In dieser Arbeit wurde das Ziel verfolgt, flexible Nanofilamente zu schaffen, die ähnlich wie Muskelfilamente zu schnellen anisotropen Kontraktionen fähig sind. Für die Herstellung solcher Stränge wurden nanostrukturierte Template (PDMS-Wrinkles) verwendet, da diese einfach und kostengünstig herzustellen und in ihren Abmessungen vielseitig skalierbar sind. Darüber hinaus ist die Strukturbildung via Wrinkles ein bekanntes lithographiefreies Verfahren, das die Herstellung von Nanostrukturen in reproduzierbarer Weise und mit hoher Fernordnung auf Nanoskala ermöglicht. In Kapitel 2.1 wurde erstmals gezeigt, dass Mikrogele als weiche bzw. schwammartige Materialien zu dicht gepackten Mikrogelarrays mit einstellbaren lateralen Dimensionen ausgerichtet werden können. Obwohl die Mikrogele bei der Anordnung auf ebene Oberflächen unterschiedliche Verformbarkeiten zeigten, behielten sie ihre Thermoresponsivität und ihr Quellverhalten bei. Zur Herstellung von Mikrogelsträngen wurde eine interpartikuläre Konnektivität angestrebt. In Kapitel 2.2 wurde dies durch verschiedene Vernetzungsmethoden (d.h. Vernetzung durch UV-Bestrahlung und Wirt-Gast-Komplexierung) erreicht. Mit VCL/AAEM-Mikrogelen ist es möglich stabile, eindimensionale Mikrogelstränge herzustellen und zur weiteren Analyse in Wasser zu redispergieren. In diesem Kapitel wurde gezeigt, dass eindimensionale Partikelanordnungen in der Zickzackformation im Gegensatz zu Anordnungen in einer Perlenkettenstruktur oder zweidimensionaler Bandstruktur den besten Kompromiss in Bezug auf die Stabilität der Mikrogelstränge in Lösung bei gleichzeitigem Erhalt einer ausreichenden Flexibilität darstellt. In Kapitel 2.3 wurden für die Bewegungsanalysen Mikrogelstränge in Zickzackformation verwendet. Zusammenfassend lässt sich sagen, dass die Flexibilität der Mikrogelstränge eher mit der mechanischen Biegefähigkeit eines halbflexiblen Kabels als mit dem eines Fadens vergleichbar ist. Die hier untersuchten Stränge bestehen aus Dutzenden oder sogar Hunderten von diskreten Einzelpartikeln, die durch Vernetzung miteinander verbunden sind und für die es in der Nanotechnologie nur wenige Parallelen gibt. Wie hier dargestellt, ermöglichen die diversen Anordnungsmethoden eine vielseitige Mikrogelarchitektur (z.B. Mikrogelnetze, Doppel- und Dreifachstränge). In Zukunft könnte man komplexere Template (z.B. keramische Rhomben und sternförmige Wrinkles) verwenden, um die Möglichkeiten der nanoskaligen Mikrogelanordnungen zu erweitern und deren Seitenverhältnisse präzise zu steuern (z.B. zur Herstellung von homogenen Mikrogelstäbchen). KW - anisotropic microgels KW - microgel strands KW - microgel chains KW - template assisted alignment of soft particles KW - microgel array KW - Mikrogele KW - Mikrogelstränge KW - Mikrogelketten KW - tamplat unterstütze Anordnung von weichen Partikeln KW - Mikrogel-Array Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439532 ER - TY - GEN A1 - Schürmann, Robin Mathis A1 - Bald, Ilko T1 - Real-time monitoring of plasmon induced dissociative electron transfer to the potential DNA radiosensitizer 8-bromoadenine N2 - The excitation of localized surface plasmons in noble metal nanoparticles (NPs) results in different nanoscale effects such as electric field enhancement, the generation of hot electrons and a temperature increase close to the NP surface. These effects are typically exploited in diverse fields such as surface-enhanced Raman scattering (SERS), NP catalysis and photothermal therapy (PTT). Halogenated nucleobases are applied as radiosensitizers in conventional radiation cancer therapy due to their high reactivity towards secondary electrons. Here, we use SERS to study the transformation of 8-bromoadenine (8BrA) into adenine on the surface of Au and AgNPs upon irradiation with a low-power continuous wave laser at 532, 633 and 785 nm, respectively. The dissociation of 8BrA is ascribed to a hot-electron transfer reaction and the underlying kinetics are carefully explored. The reaction proceeds within seconds or even milliseconds. Similar dissociation reactions might also occur with other electrophilic molecules, which must be considered in the interpretation of respective SERS spectra. Furthermore, we suggest that hot-electron transfer induced dissociation of radiosensitizers such as 8BrA can be applied in the future in PTT to enhance the damage of tumor tissue upon irradiation. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 330 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-395113 ER - TY - GEN A1 - Shin, Jaeoh A1 - Cherstvy, Andrey G. A1 - Metzler, Ralf T1 - Kinetics of polymer looping with macromolecular crowding: effects of volume fraction and crowder size N2 - The looping of polymers such as DNA is a fundamental process in the molecular biology of living cells, whose interior is characterised by a high degree of molecular crowding. We here investigate in detail the looping dynamics of flexible polymer chains in the presence of different degrees of crowding. From the analysis of the looping–unlooping rates and the looping probabilities of the chain ends we show that the presence of small crowders typically slows down the chain dynamics but larger crowders may in fact facilitate the looping. We rationalise these non-trivial and often counterintuitive effects of the crowder size on the looping kinetics in terms of an effective solution viscosity and standard excluded volume. It is shown that for small crowders the effect of an increased viscosity dominates, while for big crowders we argue that confinement effects (caging) prevail. The tradeoff between both trends can thus result in the impediment or facilitation of polymer looping, depending on the crowder size. We also examine how the crowding volume fraction, chain length, and the attraction strength of the contact groups of the polymer chain affect the looping kinetics and hairpin formation dynamics. Our results are relevant for DNA looping in the absence and presence of protein mediation, DNA hairpin formation, RNA folding, and the folding of polypeptide chains under biologically relevant high-crowding conditions. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 185 KW - gene-regulation kinetics KW - physiological consequences KW - spatial-organization KW - anomalous diffusion KW - folding kinetics KW - living cells KW - dna coiling KW - in-vitro KW - dynamics KW - mixtures Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-76961 SP - 472 EP - 488 PB - The Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Simsek, Ibrahim T1 - Ink-based preparation of chalcogenide perovskites as thin films for PV applications T1 - Präparation von Chalkogeniden Perowskiten auf Basis von molekularer Tinte als Dünnschichten für PV Anwendungen N2 - The increasing demand for energy in the current technological era and the recent political decisions about giving up on nuclear energy diverted humanity to focus on alternative environmentally friendly energy sources like solar energy. Although silicon solar cells are the product of a matured technology, the search for highly efficient and easily applicable materials is still ongoing. These properties made the efficiency of halide perovskites comparable with silicon solar cells for single junctions within a decade of research. However, the downside of halide perovskites are poor stability and lead toxicity for the most stable ones. On the other hand, chalcogenide perovskites are one of the most promising absorber materials for the photovoltaic market, due to their elemental abundance and chemical stability against moisture and oxygen. In the search of the ultimate solar absorber material, combining the good optoelectronic properties of halide perovskites with the stability of chalcogenides could be the promising candidate. Thus, this work investigates new techniques for the synthesis and design of these novel chalcogenide perovskites, that contain transition metals as cations, e.g., BaZrS3, BaHfS3, EuZrS3, EuHfS3 and SrHfS3. There are two stages in the deposition techniques of this study: In the first stage, the binary compounds are deposited via a solution processing method. In the second stage, the deposited materials are annealed in a chalcogenide atmosphere to form the perovskite structure by using solid-state reactions. The research also focuses on the optimization of a generalized recipe for a molecular ink to deposit precursors of chalcogenide perovskites with different binaries. The implementation of the precursor sulfurization resulted in either binaries without perovskite formation or distorted perovskite structures, whereas some of these materials are reported in the literature as they are more favorable in the needle-like non-perovskite configuration. Lastly, there are two categories for the evaluation of the produced materials: The first category is about the determination of the physical properties of the deposited layer, e.g., crystal structure, secondary phase formation, impurities, etc. For the second category, optoelectronic properties are measured and compared to an ideal absorber layer, e.g., band gap, conductivity, surface photovoltage, etc. N2 - Der stetig wachsende Energieverbrauch in der aktuellen technologischen Ära und die kürzliche Entscheidung der Politik auf Nuklearenergie zu verzichten hat die Menschheit dazu geleitet sich auf alternative umweltfreundliche Energiequellen wie Solare Energie zu fokussieren. Obwohl Silizium Solarzellen das Produkt einer ausgereiften Technologie sind geht die Suche nach hocheffizienten Materialien, die einfach umzusetzen sind weiter. Diese Eigenschaften führten zur Vergleichbarkeit von Halogeniden Perowskiten mit Silizium in Einfachsolarzellen innerhalb eines Jahrzehnts der Forschung. Allerdings mangelt es bei Halogeniden Perowskiten an Stabilität und jene stabile haben eine Blei-Toxizität. Andererseits bieten Chalkogenide Perowskite aussichtsreiche Eigenschaften als Absorber Materialien für den Photovoltaik Markt auf Grund des hohen Vorkommens der Elemente auf dem Planeten und ihrer chemischen Stabilität in Luft. Auf der Suche nach dem ultimativen Absorber Material für Solarzellen könnte sich eine Kombination der guten optoelektronischen Eigenschaften von Halogeniden Perowskiten mit der Stabilität von Chalkogeniden als guter Kandidat herausstellen. Infolgedessen untersucht diese Arbeit neue Methoden für die Synthese und das Design dieser neuartigen Chalkogeniden Perowskite, welche Übergangsmetalle als Kationen enthalten, z.B. BaZrS3, BaHfS3, EuZrS3, EuHfS3 and SrHfS3. Es gibt zwei Schritte in den Methoden der Deposition in dieser Untersuchung: Im ersten Schritt werden die binären Verbindungen durch eine Lösungsmittelprozessierung auf dem Substrat aufgebracht. Daraufhin wird im zweiten Schritt das aufgetragene Material in einer Chalkogeniden Atmosphäre getempert, um die Perowskit Struktur durch Festkörperreaktion zu bilden. Die Untersuchung fokussiert sich außerdem auf die Optimierung eines generalisierten Rezeptes für molekulare Tinte zur Deposition eines Präkursors aus unterschiedlichen binären Verbindungen. Die Implementierung der Präkursor Schwefelung führt entweder zu einer Formation der binären Verbindungen ohne Perowskit Struktur oder in der verzerrten Perowskit Struktur, obwohl für manche dieser Materialien laut Literatur die nadelförmige nicht-Perowskit Struktur günstiger sein sollte. Zuletzt gibt es zwei Kategorien für die Evaluierung der hergestellten Materialien: Die erste Kategorie behandelt die Determinierung der physikalischen Eigenschaften der deponierten Dünnschicht, z.B. Kristallstruktur, Sekundärphasen, Unreinheiten. In der zweiten Kategorie werden die optoelektronischen Eigenschaften gemessen und mit einem idealen Absorber verglichen, z.B. Bandlücke, Leitfähigkeit, Oberflächen Photospannung, etc. KW - chalcogenide KW - perovskite KW - Perowskite KW - Chalkogenide Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-572711 ER - TY - THES A1 - Sinn, Cornelia G. T1 - Ion binding to polymers and lipid membranes in aqueous solutions : Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen N2 - Ziel dieser Arbeit ist die Untersuchung der Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen. Im ersten Teil dieser Arbeit wurde der Einfluss verschiedener anorganischer Salze und Polyelektrolyte auf die Struktur des Wassers mit Hilfe Isothermer Mikrotitrationskalorimetrie (ITC) erforscht. Die Verdünnungswärme der Salze wurde als Maß für die Fähigkeit der Ionen, die geordnete Struktur des Wassers zu stabilisieren oder zu zerstören, verwendet. Die Verdünnungswärmen konnten auf Hofmeister Effekte zurückgeführt werden. Im Anschluss daran wurde die Bindung von Ca2+ an Natrium- Poly(acrylsäure) (NaPAA) untersucht. Mit Hilfe von ITC und einer Ca2+- selektiven Elektrode wurde die Reaktionsenthalpie und Bindungsisotherme gemessen. Es wurde gezeigt, dass die Binding von Ca2+ - Ionen an NaPAA stark endotherm und daher entropiegetrieben ist. Anschließend wurde die Bindung von Ca2+ an die eindimensionale Polymerkette mit der an ein Lipidvesikel mit denselben funktioniellen Gruppen verglichen. Es wurde beobachtet, dass die Ionenbindung –wie auch im Fall des Polymers- endotherm ist. Ein Vergleich der Ca2+- Bindung an die Lipidmembran mit der an das Polymer konnte zeigen, dass das Ion schwächer an die Membran bindet. Im Zusammenhang mit diesen Experimenten wurde auch beobachtet, dass Ca2+ nicht nur an geladene, sondern auch an zwitterionische Lipidvesikel bindet. Schließlich wurde die Wechselwirkung zweier Salze, KCl and NaCl, mit einem neutralen Polymergel, PNIPAAM, und dem geladenen Polymer PAA untersucht. Mit Hilfe von Kalorimetrie und einer kaliumselektiven Elektrode wurde beobachtet, dass die Ionen mit beiden Polymeren wechselwirken, unabhängig davon, ob diese Ladungen tragen, oder nicht. N2 - The goal of this work was to study the binding of ions to polymers and lipid bilayer membranes in aqueous solutions. In the first part of this work, the influence of various inorganic salts and polyelectrolytes on the structure of water was studied using Isothermal Titration Calorimetry (ITC). The heat of dilution of the salts was used as a scale of water structure making and breaking of the ions. The heats of dilution could be attributed to the Hofmeister Series. Following this, the binding of Ca2+ to poly(sodium acrylate) (NaPAA) was studied. ITC and a Ca2+ Ion Selective Electrode were used to measure the reaction enthalpy and binding isotherm. Binding of Ca2+ ions to PAA, was found to be highly endothermic and therefore solely driven by entropy. We then compared the binding of ions to the one-dimensional PAA polymer chain to the binding to lipid vesicles with the same functional groups. As for the polymer, Ca2+ binding was found to be endothermic. Binding of calcium to the lipid bilayer was found to be weaker than to the polymer. In the context of these experiments, it was shown that Ca2+ not only binds to charged but also to zwitterionic lipid vesicles. Finally, we studied the interaction of two salts, KCl and NaCl, to a neutral polymer gel, PNIPAAM, and to the ionic polymer PAA. Combining calorimetry and a potassium selective electrode we observed that the ions interact with both polymers, whether containing charges or not. T2 - Ion binding to polymers and lipid membranes in aqueous solutions : Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen KW - Ionen KW - Bindung KW - Salz KW - Wasser KW - Struktur KW - Hofmeister KW - Polyelektrolyt KW - Isotherme Titrationskalorimetrie KW - ionenselektive Elektrode KW - Vesikel KW - Calcium KW - Micr KW - ions KW - binding KW - salt KW - water KW - structure KW - Hofmeister KW - polyelectrolyte KW - Isothermal Titration Calorimetry KW - ion selective electrode KW - vesicle KW - calcium KW - micro Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001778 ER - TY - THES A1 - Skrabania, Katja T1 - The multifarious self-assembly of triblock copolymers : from multi-responsive polymers and multi-compartment micelles T1 - Die Vielfalt der Selbstorganisation von Triblockcopolymeren : von mehrfach schaltbaren Polymeren und Multi-Kompartiment Mizellen N2 - New ABC triblock copolymers were synthesized by controlled free-radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT). Compared to amphiphilic diblock copolymers, the prepared materials formed more complex self-assembled structures in water due to three different functional units. Two strategies were followed: The first approach relied on double-thermoresponsive triblock copolymers exhibiting Lower Critical Solution Temperature (LCST) behavior in water. While the first phase transition triggers the self-assembly of triblock copolymers upon heating, the second one allows to modify the self-assembled state. The stepwise self-assembly was followed by turbidimetry, dynamic light scattering (DLS) and 1H NMR spectroscopy as these methods reflect the behavior on the macroscopic, mesoscopic and molecular scale. Although the first phase transition could be easily monitored due to the onset of self-assembly, it was difficult to identify the second phase transition unambiguously as the changes are either marginal or coincide with the slow response of the self-assembled system to relatively fast changes of temperature. The second approach towards advanced polymeric micelles exploited the thermodynamic incompatibility of “triphilic” block copolymers – namely polymers bearing a hydrophilic, a lipophilic and a fluorophilic block – as the driving force for self-assembly in water. The self-assembly of these polymers in water produced polymeric micelles comprising a hydrophilic corona and a microphase-separated micellar core with lipophilic and fluorophilic domains – so called multi-compartment micelles. The association of triblock copolymers in water was studied by 1H NMR spectroscopy, DLS and cryogenic transmission electron microscopy (cryo-TEM). Direct imaging of the polymeric micelles in solution by cryo-TEM revealed different morphologies depending on the block sequence and the preparation conditions. While polymers with the sequence hydrophilic-lipophilic-fluorophilic built core-shell-corona micelles with the core being the fluorinated compartment, block copolymers with the hydrophilic block in the middle formed spherical micelles where single or multiple fluorinated domains “float” as disks on the surface of the lipophilic core. Increasing the temperature during micelle preparation or annealing of the aqueous solutions after preparation at higher temperatures induced occasionally a change of the micelle morphology or the particle size distribution. By RAFT polymerization not only the desired polymeric architectures could be realized, but the technique provided in addition a precious tool for molar mass characterization. The thiocarbonylthio moieties, which are present at the chain ends of polymers prepared by RAFT, absorb light in the UV and visible range and were employed for end-group analysis by UV-vis spectroscopy. A variety of dithiobenzoate and trithiocarbonate RAFT agents with differently substituted initiating R groups were synthesized. The investigation of their absorption characteristics showed that the intensity of the absorptions depends sensitively on the substitution pattern next to the thiocarbonylthio moiety and on the solvent polarity. According to these results, the conditions for a reliable and convenient end-group analysis by UV-vis spectroscopy were optimized. As end-group analysis by UV-vis spectroscopy is insensitive to the potential association of polymers in solution, it was advantageously exploited for the molar mass characterization of the prepared amphiphilic block copolymers. N2 - Die Arbeit widmet sich der Synthese von neuen amphiphilen ternären "ABC" Block-Copolymeren und der Untersuchung ihrer Selbstorganisation zu mizellaren Überstrukturen in wässriger Lösung. Die Block-Copolymere wurden durch kontrollierte radikalische Polymerisation mittels des sogenannten „RAFT“ Prozesses (radical addition fragmentation chain transfer) hergestellt. Neben der Realisierung der gewünschten Polymerarchitekturen erlaubte es die Methode, die Molmassen der Polymere durch Endgruppenanalyse zu bestimmen. Die Kettenenden der Polymere tragen infolge des Polymerisationsmechanismus’ definierte Funktionalitäten, welche UV- und sichtbares Licht absorbieren und somit durch UV-vis-Spektroskopie quantifizierbar sind. Das Absorptionsverhalten der Endgruppen wurde untersucht und die UV-vis-Endgruppenanalyse optimiert. Es zeigte sich, dass die Vorteile der Methode ihre generelle Anwendbarkeit und ihre Unempfindlichkeit gegenüber der Assoziation von Polymeren in Lösung sind. Aufgrund ihrer drei unterschiedlichen Blöcke bilden die synthetisierten ABC Triblockcopolymere komplexere selbstorganisierte Strukturen als die bisher üblichen Diblockcopolymere. Die Triebkraft für ihre Selbstorganisation in wässriger Lösung ist im wesentlichen der hydrophobe Effekt. Es wurden zwei unterschiedliche Ansätze verfolgt: Zum einen wurden doppelt-schaltbare Triblockcopolymere hergestellt, von denen ein Block permanent wasserlöslich ist, während die anderen Blöcke jeweils eine untere Entmischungstemperatur in wässriger Lösung aufweisen. Diese Blöcke „schalten“ beim Erwärmen von hydrophil auf hydrophob. Oberhalb des ersten Phasenübergangs - bei der niedrigeren Entmischungstemperatur - assoziieren die Makromoleküle und bilden Polymermizellen im Nanometerbereich. Beim weiteren Erwärmen „schaltet“ auch der zweite Block und modifiziert den selbstorganisierten Zustand, während der permanent wasserlösliche Block für die Stabilisierung der Aggregate sorgt. Die Assoziation der Block-Copolymere ist nach Abkühlen der wässrigen Lösung vollständig reversibel. Die stufenweise Selbstorganisation wurde mit Hilfe von Turbidimetrie, Dynamischer Lichtstreuung (DLS) und 1H-NMR-Spektroskopie untersucht, da diese Methoden das Verhalten auf der makroskopischen, mesoskopischen und molekularen Skala widerspiegeln. Obwohl der einsetzende Selbstorganisationsprozess problemlos zu detektieren war, konnten die Veränderungen infolge des zweiten Phasenübergang nicht immer eindeutig identifiziert werden, da sie zum Teil mit der langsamen Reaktion des Systems auf relativ schnelle Temperaturänderungen zusammenfielen. Außerdem hängt die Aggregatbildung nicht nur sensibel von der detaillierten Polymerarchitektur ab, sondern unterliegt auch teilweise einer kinetischen Kontrolle. Der zweite Ansatz zu komplexeren Polymermizellen basierte auf der Inkompatibilität „triphiler“ Blockcopolymere als Triebkraft für die Selbstorganisation. Das heißt, die Block-Copolymere bestehen aus einem hydrophilen, einen lipophilen und einen fluorophilen (Fluorkohlenwasserstoff-liebenden) Teil, die jeweils miteinander unverträglich sind. Die Polymere assoziierten in Wasser zu Polymermizellen mit einer hydrophilen Korona und einem unterstrukturierten Mizellkern mit separaten Kohlenwasserstoff- und Fluorkohlenwasserstoff-Domänen – sogenannten Multi-Kompartiment-Mizellen. Die Assoziation der Triblock-Copolymere wurde mit 1H-NMR-Spektroskopie, DLS und cryogener Transmissionselektronenmikroskopie (cryo-TEM) untersucht. Die unmittelbare Abbildung der Polymermizellen in Lösung mittels cryo-TEM enthüllte unterschiedliche Morphologien in Abhängigkeit von der Blocksequenz und den Präparationsbedingungen. Während Polymere mit der Blocksequenz hydrophil-lipophil-fluorophil Kern-Schale-Korona-Mizellen mit der Fluor-Domäne als Kern bildeten, wurde eine neue, unerwartete Mizellmorphologie für die Polymere mit dem hydrophilen Block in der Mitte gefunden: Einzelne oder mehrere Fluordomänen “schwimmen” als Scheiben auf dem lipophilen Kern. Die beobachteten Morphologien sind weitgehend stabil, unterliegen aber ebenfalls - zumindest teilweise - einer kinetischen Kontrolle. So führten erhöhte Temperaturen während der Mizellpräparation gelegentlich zu einer Veränderung der Mizellmorphologie oder Partikelgröße. KW - ABC triblock copolymer KW - reversible addition fragmentation chain transfer (RAFT) KW - thermoresponsive polymer KW - multicompartment micelle Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-30764 ER - TY - THES A1 - Soulié, Virginie T1 - Sessile droplets of salt solutions on inert and metallic surfaces T1 - Gouttes sessiles de solutions salines sur des surfaces inertes et métalliques BT - influence of salt concentration gradients on evaporation and corrosion behaviour BT - influence des gradients de concentration en sel sur la dynamique d’Evaporation et le processus de corrosion N2 - In this thesis we investigate the evaporation behaviour of sessile droplets of aqueous saline solutions on planar inert and metallic surfaces and characterise the corrosion phenomenon for iron surfaces. First we study the evaporation behaviour of sessile salty droplets on inert surfaces for a wide range of salt concentrations, relative humidities, droplet sizes and contact angles. Our study reveals the range of validity of the well-accepted diffusion-controlled evaporation model and highlights the impact of salt concentration (surface tension) gradients driven Marangoni flows on the evaporation behaviour and the subsequent salty deposit patterns. Furthermore we study the spatial-temporal evolution of sessile droplets from saline solutions on metallic surfaces. In contrast to the simple, generally accepted Evans droplet model, we show that the corrosion spreads ahead of the macroscopic contact line with a peripheral film. The three-phase contact line is destabilized by surface tension gradients induced by ionic composition changes during the course of the corrosion process and migration of cations towards the droplet perimeter. Finally we investigate the corrosion behaviour under drying salty sessile droplets on metallic surfaces. The corrosion process, in particular the location of anodic and cathodic activities over the footprint droplet area is correlated to the spatial distribution of the salt inside the drying droplet. N2 - Dans cette thèse, la dynamique d’évaporation de gouttes sessiles de solutions salines sur des surfaces planes inertes et métalliques a été étudiée et le phénomène de corrosion pour les surfaces ferriques caractérisé. En premier lieu, nous nous sommes intéressés à la dynamique d’évaporation de gouttes sessiles salées sur des surfaces inertes pour une large gamme de concentrations en sel, d’humidité relatives, de tailles de goutte et d’angles de contact. Notre étude révèle les domaines de validité du modèle classique d’évaporation, processus contrôlé par la diffusion de la vapeur dans l’air et met en évidence l’impact de flux (de Marangoni) induits par des gradients de concentration (tension de surface) en sel sur la dynamique d’évaporation et les dépôts salins obtenus après évaporation de la goutte. De plus, nous nous sommes consacrés à l’évolution spatio-temporelle de gouttes sessiles de solutions salines sur des surfaces métalliques. Contrairement au modèle simplifié de la goutte d’Evans, nous avons montré que le processus de corrosion s’étend aux abords de la ligne de contact, avec la formation d’un film périphérique. La ligne triple est déstabilisée par des gradients de tension de surface induits par des variations de composition ionique au cours du processus de corrosion et la migration des cations vers la périphérie de la goutte. Enfin nous avons étudié le phénomène de corrosion du métal induit par l’évaporation de gouttes sessiles salées. Le processus de corrosion, en particulier la localisation des réactions anodiques et cathodiques sur la surface métallique en contact avec la goutte est corrélée à la distribution spatiale du sel au sein de la goutte s’évaporant. KW - sessile droplet KW - salt KW - evaporation KW - corrosion KW - liegende Tropfen KW - Salz KW - Verdunstung KW - Korrosion KW - gouttes sessiles KW - sel KW - evaporation KW - corrosion Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90329 ER - TY - THES A1 - Steeples, Elliot T1 - Amino acid-derived imidazolium salts: platform molecules for N-Heterocyclic carbene metal complexes and organosilica materials T1 - Imidazolium-Salze aus Aminosäure: Bausteine für N-Heterozyklische-Carben Metallkomplexe und Organosilicamaterialien N2 - In the interest of producing functional catalysts from sustainable building-blocks, 1, 3-dicarboxylate imidazolium salts derived from amino acids were successfully modified to be suitable as N-Heterocyclic carbene (NHC) ligands within metal complexes. Complexes of Ag(I), Pd(II), and Ir(I) were successfully produced using known procedures using ligands derived from glycine, alanine, β-alanine and phenylalanine. The complexes were characterized in solid state using X-Ray crystallography, which allowed for the steric and electronic comparison of these ligands to well-known NHC ligands within analogous metal complexes. The palladium complexes were tested as catalysts for aqueous-phase Suzuki-Miyaura cross-coupling. Water-solubility could be induced via ester hydrolysis of the N-bound groups in the presence of base. The mono-NHC–Pd complexes were seen to be highly active in the coupling of aryl bromides with phenylboronic acid; the active catalyst of which was determined to be mostly Pd(0) nanoparticles. Kinetic studies determined that reaction proceeds quickly in the coupling of bromoacetophenone, for both pre-hydrolyzed and in-situ hydrolysis catalyst dissolution. The catalyst could also be recycled for an extra run by simply re-using the aqueous layer. The imidazolium salts were also used to produce organosilica hybrid materials. This was attempted via two methods: by post-grafting onto a commercial organosilica, and co-condensation of the corresponding organosilane. The co-condensation technique harbours potential for the production of solid-support catalysts. N2 - Um Katalysatoren aus nachhaltigen Chemikalien herzustellen, wurden 1,3-Dicarbonsäure-Imidazolium-Salze, welche aus Aminosäuren synthetisiert wurden als N-heterozyklische-Carben-Liganden (NHC) in Metallkomplexen modifiziert. Liganden aus Glycin, Alanin, β-Alanin und Phenylalanin wurden wiederum genutzt, um Metallkomplexe aus Silber(I), Palladium(II) und Iridium(I) darzustellen. Alle Komplexverbindungen wurden mit Röntgenkristallographie charakterisiert. Die Palladiumkomplexe wurden als Katalysatoren in der Suzuki-Miyaura Reaktion eingesetzt. Durch zusätzliche Hydrolyse der Ester-Gruppen konnte eine gute Wasserlöslichkeit erreicht werden. Die hohe Aktivität der Mono-NHC–Palladium-Komplexe konnte bei der Kupplung von Arylbromiden mit Phenylboronsäuren aufgezeigt werden. Die aktive Spezies wurde hauptsächlich Pd(0) Nanopartikeln zugeschrieben. Nach erfolgreichem Recycling konnte der Katalysator noch einmal wiederverwendet werden. Die Imidazolium-Salze wurden ebenfalls herangezogen, um Organosilicamaterialien zu synthetisieren. Die Herstellung wurde durch zwei Methoden erreicht. Zum einen durch nachträgliches Aufbringen auf kommerzielle Siliziummaterialien, sowie durch Co-Kondensation auf das entsprechende Organosilan. Diese Co-Kondensation birgt Potential zur Herstellung von festen Trägerkatalysatoren. KW - synthesis KW - Synthese KW - sustainable chemistry KW - nachhaltige Chemie KW - organometallics KW - Metallorganischen KW - water KW - Wasser Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101861 ER - TY - GEN A1 - Steeples, Elliot A1 - Kelling, Alexandra A1 - Schilde, Uwe A1 - Esposito, Davide T1 - Amino acid-derived N-heterocyclic carbene palladium complexes for aqueous phase Suzuki–Miyaura couplings N2 - In this work, three ligands produced from amino acids were synthesized and used to produce five bis- and PEPPSI-type palladium–NHC complexes using a novel synthesis route from sustainable starting materials. Three of these complexes were used as precatalysts in the aqueous-phase Suzuki–Miyaura coupling of various substrates displaying high activity. TEM and mercury poisoning experiments provide evidence for Pd-nanoparticle formation stabilized in water. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 319 KW - transition-metal-complexes KW - imidazolium salts KW - green chemistry KW - water KW - catalysts KW - nhc KW - hydrogenation KW - isomerization KW - nanoparticles KW - precatalysts Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394488 SP - 4922 EP - 4930 ER - TY - THES A1 - Strauß, Volker T1 - Laser-induced carbonization - from fundamentals to applications N2 - Fabricating electronic devices from natural, renewable resources has been a common goal in engineering and materials science for many years. In this regard, carbon is of special significance due to its biological compatibility. In the laboratory, carbonized materials and their composites have been proven as promising solutions for a range of future applications in electronics, optoelectronics, or catalytic systems. On the industrial scale, however, their application is inhibited by tedious and expensive preparation processes and a lack of control over the processing and material parameters. Therefore, we are exploring new concepts for the direct utilization of functional carbonized materials in electronic applications. In particular, laser-induced carbonization (carbon laser-patterning (CLaP)) is emerging as a new tool for the precise and selective synthesis of functional carbon-based materials for flexible on-chip applications. We developed an integrated approach for on-the-spot laser-induced synthesis of flexible, carbonized films with specific functionalities. To this end, we design versatile precursor inks made from naturally abundant starting compounds and reactants to cast films which are carbonized with an infrared laser to obtain functional patterns of conductive porous carbon networks. In our studies we obtained deep mechanistic insights into the formation process and the microstructure of laser-patterned carbons (LP-C). We shed light on the kinetic reaction mechanism based on the interplay between the precursor properties and the reaction conditions. Furthermore, we investigated the use of porogens, additives, and reactants to provide a toolbox for the chemical and physical fine-tuning of the electronic and surface properties and the targeted integration of functional sites into the carbon network. Based on this knowledge, we developed prototype resistive chemical and mechanical sensors. In further studies, we show the applicability of LP-C as electrode materials in electrocatalytic and charge-storage applications. To put our findings into a common perspective, our results are embedded into the context of general carbonization strategies, fundamentals of laser-induced materials processing, and a broad literature review on state-of-the-art laser-carbonization, in the general part. N2 - Die Herstellung elektronischer Geräte aus natürlichen, erneuerbaren Ressourcen ist seit vielen Jahren ein gemeinsames Ziel in den Ingenieurs- und Materialwissenschaften. Kohlenstoff kommt dabei aufgrund seiner biologischen Verträglichkeit eine besondere Bedeutung zu. Im Labor haben sich karbonisierte Materialien und ihre Verbundwerkstoffe als vielversprechende Lösungen für eine Reihe zukünftiger Anwendungen in der Elektronik, Optoelektronik oder katalytischen Systemen erwiesen. Im industriellen Maßstab wird ihre Anwendung jedoch durch langwierige und teure Herstellungsverfahren und mangelnde Kontrolle über die Verarbeitungs- und Materialparameter gehemmt. Daher erforschen wir neue Konzepte für die direkte Nutzung funktionaler karbonisierter Materialien in elektronischen Anwendungen. Insbesondere die laserinduzierte Karbonisierung / Kohlenstoff-Laserstrukturierung (KoLaSt) entwickelt sich zu einem neuen Werkzeug für die präzise und selektive Synthese von funktionellen Materialien auf Kohlenstoffbasis für flexible On-Chip-Anwendungen. Wir haben einen integrierten Ansatz für die direkte laserinduzierte Synthese von flexiblen, karbonisierten Filmen mit spezifischen Funktionalitäten entwickelt. Zu diesem Zweck haben wir vielseitige Vorläufertinten aus natürlich vorkommenden organischen Ausgangsstoffen und Reaktanten entwickelt, um Filme aufzutragen, die mit einem Infrarotlaser karbonisiert werden um dadurch funktionelle Muster aus leitfähigen porösen Kohlenstoffnetzwerken zu erhalten. In unseren Studien haben wir tiefe mechanistische Einblicke in den Bildungsprozess und die Mikrostruktur von laserstrukturierten Kohlenstoffen (LP-C) erhalten. Wir beleuchten den kinetischen Reaktionsmechanismus basierend auf dem Zusammenspiel zwischen den Vorläufereigenschaften und den Reaktionsbedingungen. Darüber hinaus untersuchen wir die Verwendung von Porogenen, Additiven und Reaktanten, um eine Toolbox für die chemische und physikalische Feineinstellung der elektronischen und Oberflächeneigenschaften und die gezielte Integration von funktionellen Einheiten in das Kohlenstoffnetzwerk bereitzustellen. Basierend auf diesem Wissen haben wir Prototypen resistiver chemischer und mechanischer Sensoren entwickelt. In weiteren Studien zeigen wir die Anwendbarkeit von LP-C als Elektrodenmaterialien in elektrokatalytischen und Ladungsspeicheranwendungen. Um unsere Erkenntnisse in eine allgemeine Perspektive zu bringen, betten wir unsere Ergebnisse im allgemeinen Teil in den Kontext bekannter Karbonisierungsstrategien, Grundlagen der laserinduzierten Materialbearbeitung und einer breiten Literaturübersicht zum Stand der Technik der Laserkarbonisierung ein. KW - Laser-Carbonization KW - Carbonization KW - Chemical Sensors KW - Electronic materials KW - Laserkarbonisierung KW - Karbonisierung KW - chemische Sensoren KW - elektronische Materialien Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-591995 ER - TY - THES A1 - Stöckle, Silke T1 - Thin liquid films with nanoparticles and rod-like ions as models for nanofluidics T1 - Dünne flüssige Filme mit Nanopartikeln und stäbchenförmigen Ionen als Nanofluidische Modelle N2 - With the rise of nanotechnology in the last decade, nanofluidics has been established as a research field and gained increased interest in science and industry. Natural aqueous nanofluidic systems are very complex, there is often a predominance of liquid interfaces or the fluid contains charged or differently shaped colloids. The effects, promoted by these additives, are far from being completely understood and interesting questions arise with regards to the confinement of such complex fluidic systems. A systematic study of nanofluidic processes requires designing suitable experimental model nano – channels with required characteristics. The present work employed thin liquid films (TLFs) as experimental models. They have proven to be useful experimental tools because of their simple geometry, reproducible preparation, and controllable liquid interfaces. The thickness of the channels can be adjusted easily by the concentration of electrolyte in the film forming solution. This way, channel dimensions from 5 – 100 nm are possible, a high flexibility for an experimental system. TLFs have liquid IFs of different charge and properties and they offer the possibility to confine differently shaped ions and molecules to very small spaces, or to subject them to controlled forces. This makes the foam films a unique “device” available to obtain information about fluidic systems in nanometer dimensions. The main goal of this thesis was to study nanofluidic processes using TLFs as models, or tools, and to subtract information about natural systems plus deepen the understanding on physical chemical conditions. The presented work showed that foam films can be used as experimental models to understand the behavior of liquids in nano – sized confinement. In the first part of the thesis, we studied the process of thinning of thin liquid films stabilized with the non – ionic surfactant n – dodecyl – β – maltoside (β – C₁₂G₂) with primary interest in interfacial diffusion processes during the thinning process dependent on surfactant concentration 64. The surfactant concentration in the film forming solutions was varied at constant electrolyte (NaCl) concentration. The velocity of thinning was analyzed combining previously developed theoretical approaches. Qualitative information about the mobility of the surfactant molecules at the film surfaces was obtained. We found that above a certain limiting surfactant concentration the film surfaces were completely immobile and they behaved as non – deformable, which decelerated the thinning process. This follows the predictions for Reynolds flow of liquid between two non – deformable disks. In the second part of the thesis, we designed a TLF nanofluidic system containing rod – like multivalent ions and compared this system to films containing monovalent ions. We presented first results which recognized for the first time the existence of an additional attractive force in the foam films based on the electrostatic interaction between rod – like ions and oppositely charged surfaces. We may speculate that this is an ion bridging component of the disjoining pressure. The results show that for films prepared in presence of spermidine the transformation of the thicker CF to the thinnest NBF is more probable as films prepared with NaCl at similar conditions of electrostatic interaction. This effect is not a result of specific adsorption of any of the ions at the fluid surfaces and it does not lead to any changes in the equilibrium properties of the CF and NBF. Our hypothesis was proven using the trivalent ion Y3+ which does not show ion bridging. The experimental results are compared to theoretical predictions and a quantitative agreement on the system’s energy gain for the change from CF to NBF could be obtained. In the third part of the work, the behavior of nanoparticles in confinement was investigated with respect to their impact on the fluid flow velocity. The particles altered the flow velocity by an unexpected high amount, so that the resulting changes in the dynamic viscosity could not be explained by a realistic change of the fluid viscosity. Only aggregation, flocculation and plug formation can explain the experimental results. The particle systems in the presented thesis had a great impact on the film interfaces due to the stabilizer molecules present in the bulk solution. Finally, the location of the particles with respect to their lateral and vertical arrangement in the film was studied with advanced reflectivity and scattering methods. Neutron Reflectometry studies were performed to investigate the location of nanoparticles in the TLF perpendicular to the IF. For the first time, we study TLFs using grazing incidence small angle X – ray scattering (GISAXS), which is a technique sensitive to the lateral arrangement of particles in confined volumes. This work provides preliminary data on a lateral ordering of particles in the film. N2 - Mit dem Heranwachsen der Nanotechnologie in den vergangenen zehn Jahren hat sich die Nanofluidik als Forschungsbereich etabliert und erfährt wachsende Aufmerksamkeit in der Wissenschaft, sowie auch in der Industrie. Im biomedizinischen Bereich, wo intrazelluläre Prozesse häufig komplexer, nanofluidischer Natur sind, wird sich vermehrt für ein detailliertes Verständnis von nanofluidischen Prozessen interessiert, z.B. für den Einfluss von Kolloiden verschiedenster Form oder elektrischer Ladung auf die Kanäle und auf das Fließverhalten oder die Auswirkungen der Einengung von Flüssigkeiten und Kolloiden in Nanometer Geometrien. In der vorliegenden Arbeit werden dünne flüssige Filme, hinsichtlich ihrer Funktion als nanofluidische Modelle untersucht. Im ersten Teil der Arbeit wurde die Fließgeschwindigkeit des Fluids aus dem dünnen Film, abhängig von der Konzentration der filmstabilisierenden Tensidmoleküle n – Dodecyl β – D – Maltoside ( β – C₁₂G₂) bei einer konstanten Elektrolytkonzentration von 0.2 mM NaCl untersucht. Mit einem theoretischen Modell konnte das Dünnungsverhalten nachgezeichnet werden. Es wurde eine kritische Tensidkonzentration gefunden, unter der die Oberflächen lateral mobil sind und über der sie sich wie fest verhalten. Dadurch konnten wir Aufschluss darüber erlangen, wie die Oberfläche des Films unter verschiedenen Bedingungen geschaffen ist, und das in Bezug zur Verteilungsdichte der Moleküle an den Oberflächen setzen. Im weiteren wurden komplexere, nanofluidische Systeme untersucht, wobei zum einen ~ 1 nm lange, stäbchenförmige, multivalent geladene Spermidin - Moleküle die punktförmigen Elektrolyte ersetzten. Es konnte eine deutliche Veränderung der Stabilität zwischen Filmen mit und ohne Stäbchen festgestellt werden. Die Filme, mit NaCl, blieben länger in dem metastabilen „Common Film“ (CF) Zustand als die Filme, die eine vergleichbare Konzentration von Spermidin Stäbchen beinhalteten. Die Ergebnisse deuteten auf eine zusätzliche Anziehungskraft durch Brückenbildung zwischen zwei geladenen Oberflächen durch gegensätzlich geladene Stäbchenförmige Moleküle hin. Es konnte gezeigt werden, dass dieser Effekt weder ein Ergebnis von spezifischer Ionenadsorption an die Filmoberfläche war, noch ein Unterschied in den Gleichgewichtszuständen von den Dicken der CFs und der Newton Black Films (NBFs) hervorrief, was auf die korrekte Annahme der Ionenstärke in der Lösung schließen ließ. Auch in Versuchen mit ebenfalls trivalenten Ionen YCl3 wurde festgestellt, dass kein vergleichbarer Überbrückungseffekt auftritt. Die Ergebnisse wurden mit theoretischen Simulationen verglichen und es wurde eine quantitative Übereinstimmung gefunden bezüglich der Größe des Systeminternen Energiegewinns durch den Überbrückungseffekt. Desweiteren wurde das Fließverhalten von Fluiden mit Kolloiden eingeengt in Nanometer Geometrien untersucht. Für zwei verschiedene Arten von Nanopartikeln (Fe3O4 stabilisiert mit Oleinsäure und polymerstabilisierte Goldpartikel) wurde eine Verlangsamung der Fließgeschwindigkeit festgestellt. Mit einem theoretischen Modell konnte das Fließverhalten nur für enorm erhöhte Viskositätswerte des Fluids erklärt werden. Die Viskositätserhöhung wurde mit Partikelaggregaten, die den Ausfluss behindern, erklärt und diskutiert, unter der Annahme eines nicht - Newtonischen Fließverhaltens der Dispersionen. Gleichermaßen wurde die strukturelle Anordnung der Partikel in den Filmen hinsichtlich ihrer vertikalen und lateralen Verteilung untersucht. In dieser Arbeit werden vorläufige Ergebnisse präsentiert, die noch weiteren Studien bedürfen. Mit Neutronenreflexion sollte die Anordnung der Partikel orthogonal zur Oberfläche im Film analysiert werden. Eine qualitative Analyse lässt schließen, dass bei einer höheren Konzentration von Partikeln in Lösung, sich auch eine erhöhte Konzentration von Partikeln im dünnen Film befindet. Leider konnten die Daten nicht hinsichtlich der Lage der Partikel analysiert werden. Zum ersten Mal wurden dünne flüssige Filme mit Kleinwinkelröntgenstreuung unter streifendem Einfall (GISAXS) analysiert. Mit Hilfe dieser Methode sollte eine laterale Anordnung der Partikel im Film untersucht werden. Es konnten erfolgreiche Messungen durchgeführt werden und mit Hilfe der rechnergestützten Analyse konnte eine Aussage gemacht werden, dass ~ 6 nm große Teilchen in ~ 43 nm Abstand sich im Film befinden. Die Aussage bezüglich der kleinen Teilchen könnte sich auf einzelne, kleinere Partikel beziehen, allerdings könnten auch die 43 nm eine relevante Strukturgröße darstellen, da es in der Dispersion gehäuft Aggregate mit dem Durchmesser in dem Größenbereich vorliegen. Zusammenfassend können sich mit dieser Arbeit die dünnen flüssigen Filme als eine wichtige Kernmethode der Untersuchung von nanofluidischen Prozessen, wie sie häufig in der Natur vorkommen, behaupten. KW - Nanofluidik KW - Schaumfilme KW - Spermidin KW - Nanopartikel KW - Oberflächenkräfte KW - nanofluidics KW - foam films KW - spermidine KW - nanoparticles KW - interfacial forces Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-46370 ER - TY - THES A1 - Sütterlin, Martin T1 - New inverse hydogel opals as protein responsive sensors T1 - Neue inverse Hydrogelopale als proteinresponsive Sensoren N2 - In this work, the development of temperature- and protein-responsive sensor materials based on biocompatible, inverse hydrogel opals (IHOs) is presented. With these materials, large biomolecules can be specifically recognised and the binding event visualised. The preparation of the IHOs was performed with a template process, for which monodisperse silica particles were vertically deposited onto glass slides as the first step. The obtained colloidal crystals with a thickness of 5 μm displayed opalescent reflections because of the uniform alignment of the colloids. As a second step, the template was embedded in a matrix consisting of biocompatible, thermoresponsive hydrogels. The comonomers were selected from the family of oligo(ethylene glycol)methacrylates. The monomer solution was injected into a polymerisation mould, which contained the colloidal crystals as a template. The space in-between the template particles was filled with the monomer solution and the hydrogel was cured via UV-polymerisation. The particles were chemically etched, which resulted in a porous inner structure. The uniform alignment of the pores and therefore the opalescent reflection were maintained, so these system were denoted as inverse hydrogel opals. A pore diameter of several hundred nanometres as well as interconnections between the pores should facilitate a diffusion of bigger (bio)molecules, which was always a challenge in the presented systems until now. The copolymer composition was chosen to result in a hydrogel collapse over 35 °C. All hydrogels showed pronounced swelling in water below the critical temperature. The incorporation of a reactive monomer with hydroxyl groups ensured a potential coupling group for the introduction of recognition units for analytes, e.g. proteins. As a test system, biotin as a recognition unit for avidin was coupled to the IHO via polymer-analogous Steglich esterification. The amount of accessible biotin was quantified with a colorimetric binding assay. When avidin was added to the biotinylated IHO, the wavelength of the opalescent reflection was significantly shifted and therefore the binding event was visualised. This effect is based on the change in swelling behaviour of the hydrogel after binding of the hydrophilic avidin, which is amplified by the thermoresponsive nature of the hydrogel. A swelling or shrinking of the pores induces a change in distance of the crystal planes, which are responsible for the colour of the reflection. With these findings, the possibility of creating sensor materials or additional biomolecules in the size range of avidin is given. N2 - In dieser Arbeit wird die Entwicklung von temperatur- und proteinresponsiven Sensormaterialien auf Basis von biokompatiblen, inversen Hydrogelopalen (IHO) vorgestellt, mit welchen die spezifische Erkennung größerer Biomoleküle visuell ausgelesen werden kann. Die Darstellung der IHOs erfolgte mittels Templatverfahren, bei dem im ersten Schritt monodisperse Silicapartikel vertikal auf Objektträger abgeschieden wurden. Die so erhaltenen Kolloidkristalle mit einer Dicke von 5 μm zeigten opaleszente Reflexionen aufgrund der gleichförmigen Anordnung der Partikel. Im zweiten Schritt wurde das Templat in eine Matrix aus biokompatiblen, thermoresponsiven Hydrogelen eingebettet. Die Comonomere wurden aus der Familie der Oligo(ethylenglykol)methacrylate ausgewählt. Zur Synthese des Hydrogels wurde die Monomerlösung in eine Polymerisationsform injiziert, welche die Kolloidkristalle als Templat beinhaltete. Die Zwischenräume der Templatpartikel wurden mit der Monomerlösung gefüllt und das Hydrogelnetzwerk per UV-Polymerisation erhalten. Die Templatpartikel wurden anschließend nasschemisch heraus gelöst, so dass eine poröse innere Struktur erhalten wurde. Die regelmäßige Anordnung der Poren und damit die opaleszenten Reflexionen wurden dabei beibehalten, so dass diese Systeme als inverse Hydorgelopale bezeichnet werden. Ein Porendurchmesser von mehreren hundert Nanometer, sowie durchgängige Verbindungskanäle zwischen den einzelnen Poren sollten eine Diffusion von großen (Bio)molekülen erleichtern, was bei bisherigen Systemen ein Problem darstellte. Die Copolymerzusammensetzung wurde dabei so gewählt, dass ein Kollaps des Hydrogels über 35 °C stattfand. Alle Hydrogele zeigten ausgeprägte Quellung in Wasser unterhalb der kritischen Temperatur. Der Einbau von reaktiven Comonomeren mit Hydroxylgruppen gewährleistete dabei die Funktionalisierbarkeit des Hydrogels mit Erkennungsgruppen für entsprechende Analytmoleküle, wie z.B. Proteine. Als Testsystem wurde Biotin als Erkennungseinheit für Avidin in das Hydrogel mittels polymeranaloger Steglich Veresterung eingebaut. Die Menge an zugänglichem Biotin wurde dabei per colorimetrischem Bindungsassay quantifiziert. Dabei zeigte sich, dass sich die Wellenlänge der Reflexion nach Zugabe von Avidin zum biotinylierten inversen Hydrogelopal signifikant verschob und damit das Bindungsereignis visuell auslesbar ist. Dieser Effekt beruht auf dem veränderten Quellungsverhalten des Hydrogels nach Bindung des hydrophilen Proteins Avidin in Wasser, welches durch den thermosresponsiven Charakter des Hydrogels verstärkt ist. Ein Aufweiten oder Schrumpfen der Poren ändert die Abstände der gleichmäßig angeordneten Poren, welche für die Farbe des inversen Opals verantwortlich sind. Auf Basis dieser Erkenntnisse lassen sich möglicherweise Sensormaterialen für die Erkennung weiterer Biomoleküle in der Größenordnung von Avidin erstellen. KW - hydrogel KW - opal KW - protein KW - responsive KW - sensor Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-70179 ER - TY - THES A1 - Tan, Irene T1 - Towards greener stationary phases : thermoresponsive and carbonaceous chromatographic supports T1 - Zu grüner Separation : thermoresponsive und kohlenstoffhaltige chromatographische Trägermaterialien N2 - Polymers which are sensitive towards external physical, chemical and electrical stimuli are termed as ‘intelligent materials’ and are widely used in medical and engineering applications. Presently, polymers which can undergo a physical change when heat is applied at a certain temperature (cloud point) in water are well-studied for this property in areas of separation chemistry, gene and drug delivery and as surface modifiers. One example of such a polymer is the poly (N-isopropylacrylamide) PNIPAAM, where it is dissolved well in water below 32 oC, while by increasing the temperature further leads to its precipitation. In this work, an alternative polymer poly (2-(2-methoxy ethoxy)ethyl methacrylate-co- oligo(ethylene glycol) methacrylate) (P(MEO2MA-co-OEGMA)) is studied due to its biocompatibility and the ability to vary its cloud points in water. When a layer of temperature responsive polymer was attached to a single continuous porous piece of silica-based material known as a monolith, the thermoresponsive characteristic was transferred to the column surfaces. The hybrid material was demonstrated to act as a simple temperature ‘switch’ in the separation of a mixture of five steroids under water. Different analytes were observed to be separated under varying column temperatures. Furthermore, more complex biochemical compounds such as proteins were also tested for separation. The importance of this work is attributed to separation processes utilizing environmentally friendly conditions, since harsh chemical environments conventionally used to resolve biocompounds could cause their biological activities to be rendered inactive. N2 - Polymere, welche empfindlich gegenüber externen physikalischen, chemischen und elektrischen Einflüssen sind, werden „intelligente Materialien“ genannt. Diese werden weitverbreitet in medizinischen und technischen Anwendungen eingesetzt. Auf diesem Gebiet ausführlich erforschte Materialien sind Polymere, welche durch Hitze bei einer bestimmten Temperatur (Trübungspunkt) eine physikalische Veränderung eingehen können, genannt thermoresponsive Polymere. Eingesetzt werden diese z.B. in chromatographischen Trennverfahren, in Gen- und Wirkstofftransport Vorgängen und zur Oberflächenmodifikation. Ein Beispiel für so ein Polymer ist das poly(N-isopropylacrylamide) PNIPAAM, welches unter 32 °C in Wasser gelöst vorliegt und mit Erhöhung der Temperatur als Niederschlag ausfällt. In dieser Arbeit wurde ein alternatives Polymer, das poly(2-(2-methoxyethoxy)ethylmethacrylate-co-oligo(ethyleneglycol) methacrylate) (P(MEO2MA-co-OEGMA)), untersucht, in Bezug auf Biokompatibilität und der Änderung des Trübungspunktes in Wasser. Wenn eine Schicht eines temperaturempfindlichen Polymers auf einen Monolithen (einteiliger, poröser und auf Silika-basierendes Material) aufgebracht wird, werden die thermoresponsiven Eigenschaften auf die Oberfläche dieses Monolithen übertragen. Der Monolith dient hier als Säule in einer HPLC-Anlage. Es wurde gezeigt, dass das Hybrid-Material als einfacher „Temperaturschalter“ in der Trennung von fünf verschiedenen Steroiden in Wasser agieren kann. Untersucht wurde die Separation verschiedener Analyten mit dem Variieren der Säulentemperatur. Zusätzlich wurden mehr komplexe biochemische Stoffe, wie Proteine, getestet. Die Bedeutung dieser Arbeit ist zurückzuführen auf Separationsprozesse, welche umweltfreundlichen Bedingungen nutzen, da die rauen chemischen Bedingungen in konventionellen Separationsprozessen die biologische Inaktivität der Verbindungen zur Folge haben können. Der zweite Teil der Arbeit beschäftigte sich mit der Entwicklung eines alternativen Trägermaterials als Ersatz zu den Silika-basierende Trennungssäulen. Kohlenstoffmaterialien sind aufgrund ihrer ausgezeichneten mechanischen Härte und chemischen Stabilität eine vielversprechend Alternative. Die Synthese von Kohlenstoffkugeln als Trägermaterial kann als „grüner“ Prozess in meiner Arbeit angesehen werden, da milde Synthesebedingungen in purem Wasser verwendet wurden. Die Leistungsfähigkeit des Materials wurde mit einer Serie von Separationsreaktionen gezeigt. KW - thermoresponsive KW - poly(N-isopropylacrylamide) KW - oligo(ethyleneglycol) KW - Monolith KW - Chromatographie KW - thermoresponsive KW - poly(N-isopropyl acrylamide) KW - oligo(ethylene glycol) KW - monolith KW - chromatography Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-53130 ER - TY - THES A1 - Tan, Li T1 - Synthesis, assembly and thermo-responsivity of polymer-functionalized magnetic cobalt nanoparticles T1 - Synthese, Assemblierung und Temperatur-Responsivität von Polymer-funktionalisierten magnetischen Cobalt Nanopartikeln N2 - This thesis mainly covers the synthesis, surface modification, magnetic-field-induced assembly and thermo-responsive functionalization of superparamagnetic Co NPs initially stabilized by hydrophobic small molecules oleic acid (OA) and trioctylphosphine oxide (TOPO), as well as the synthesis of both superparamagnetic and ferromagnetic Co NPs by using end-functionalized-polystyrene as stabilizer. Co NPs, due to their excellent magnetic and catalytic properties, have great potential application in various fields, such as ferrofluids, catalysis, and magnetic resonance imaging (MRI). Superparamagnetic Co NPs are especially interesting, since they exhibit zero coercivity. They get magnetized in an external magnetic field and reach their saturation magnetization rapidly, but no magnetic moment remains after removal of the applied magnetic field. Therefore, they do not agglomerate in the body when they are used in biomedical applications. Normally, decomposition of metallic precursors at high temperature is one of the most important methods in preparation of monodisperse magnetic NPs, providing tunability in size and shape. Hydrophobic ligands like OA, TOPO and oleylamine are often used to both control the growth of NPs and protect them from agglomeration. The as-prepared magnetic NPs can be used in biological applications as long as they are transferred into water. Moreover, their supercrystal assemblies have the potential for high density data storage and electronic devices. In addition to small molecules, polymers can also be used as surfactants for the synthesis of ferromagnetic and superparamagnetic NPs by changing the reaction conditions. Therefore, chapter 2 gives an overview on the basic concept of synthesis, surface modification and self-assembly of magnetic nanoparticles. Various examples were used to illustrate the recent work. The hydrophobic Co NPs synthesized with small molecules as surfactants limit their biological applications, which require a hydrophilic or aqueous environment. Surface modification (e.g., ligand exchange) is a general idea for either phase transition or surface-functionalization. Therefore, in chapter 3, a ligand exchange process was conducted to functionalize the surface of Co NPs. PNIPAM is one of the most popular smart polymers and its lower critical solution temperature (LCST) is around 32 °C, with a reversible change in the conformation structure between hydrophobic and hydrophilic. The novel nanocomposites of superparamagnetic Co NPs and thermo-responsive PNIPAM are of great interest. Thus, well-defined superparamagnetic Co NPs were firstly synthesized through the thermolysis of cobalt carbonyl by using OA and TOPO as surfactants. A functional ATRP initiator, containing an amine (as anchoring group) and a 2-bromopropionate group (SI-ATRP initiator), was used to replace the original ligands. This process is rapid and facial for efficient surface functionalization and afterwards the Co NPs can be dispersed into polar solvent DMF without aggregation. FT-IR spectroscopy showed that the TOPO was completely replaced, but a small amount of OA remained on the surface. A TGA measurement allowed the calculation of the grafting density of the initiator as around 3.2 initiator/nm2. Then, the surface-initiated ATRP was conducted for the polymerization of NIPAM on the surface of Co NPs and rendered the nanocomposites water-dispersible. A temperature-dependent dynamic light scattering study showed the aggregation behavior of PNIPAM-coated Co NPs upon heating and this process was proven to be reversible. The combination of superparamagnetic and thermo-responsive properties in these hybrid nanoparticles is promising for future applications e.g. in biomedicine. In chapter 4, the magnetic-field-induced assembly of superparamagnetic cobalt nanoparticles both on solid substrates and at liquid-air interface was investigated. OA- and TOPO-coated Co NPs were synthesized via the thermolysis of cobalt carbonyl and dispersed into either hexane or toluene. The Co NP dispersion was dropped onto substrates (e.g., TEM grid, silicon wafer) and at liquid-air (water-air or ethylene glycol-air) interface. Due to the attractive dipolar interaction, 1-D chains formed in the presence of an external magnetic field. It is known that the concentration and the strength of the magnetic field can affect the assembly behavior of superparamagnetic Co NPs. Therefore, the influence of these two parameters on the morphology of the assemblies was studied. The formed 1-D chains were shorter and flexible at either lower concentration of the Co NP dispersion or lower strength of the external magnetic field due to thermal fluctuation. However, by increasing either the concentration of the NP dispersion or the strength of the applied magnetic field, these chains became longer, thicker and straighter. The reason could be that a high concentration led to a high fraction of short dipolar chains, and their interaction resulted in longer and thicker chains under applied magnetic field. On the other hand, when the magnetic field increased, the induced moments of the magnetic nanoparticles became larger, which dominated over the thermal fluctuation. Thus, the formed short chains connected to each other and grew in length. Thicker chains were also observed through chain-chain interaction. Furthermore, the induced moments of the NPs tended to direct into one direction with increased magnetic field, thus the chains were straighter. In comparison between the assembly on substrates, at water-air interface and at ethylene glycol-air interface, the assembly of Co NPs in hexane dispersion at ethylene glycol-air interface showed the most regular and homogeneous chain structures due to the better spreading of the dispersion on ethylene glycol subphase than on water subphase and substrates. The magnetic-field-induced assembly of superparamagnetic nanoparticles could provide a powerful approach for applications in data storage and electronic devices. Chapter 5 presented the synthesis of superparamagnetic and ferromagnetic cobalt nanoparticles through a dual-stage thermolysis of cobalt carbonyl (Co2(CO)8) by using polystyrene as surfactant. The amine end-functionalized polystyrene surfactants with different molecular weight were prepared via atom transfer radical polymerization technique. The molecular weight determination of polystyrene was conducted by gel permeation chromatography (GPC) and matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) mass spectrometry techniques. The results showed that, when the molecular weight distribution is low (Mw/Mn < 1.2), the measurement by GPC and MALDI-ToF MS provided nearly similar results. For example, the molecular weight of 10600 Da was obtained by MALDI-ToF MS, while GPC gave 10500 g/mol (Mw/Mn = 1.17). However, if the polymer is poly distributed, MALDI-ToF MS cannot provide an accurate value. This was exemplified for a polymer with a molecular weight of 3130 Da measured by MALDI-TOF MS, while GPC showed 2300 g/mol (Mw/Mn = 1.38). The size, size distribution and magnetic properties of the hybrid particles were different by changing either the molecular weight or concentration of the polymer surfactants. The analysis from TEM characterization showed that the size of cobalt nanoparticles stabilized with polystyrene of lower molecular weight (Mn = 2300 g/mol) varied from 12–22 nm, while the size with middle (Mn = 4500 g/mol) and higher molecular weight (Mn = 10500 g/mol) of polystyrene-coated cobalt nanoparticles showed little change. Magnetic measurements exhibited that the small cobalt particles (12 nm) were superparamagnetic, while larger particles (21 nm) were ferromagnetic and assembled into 1-D chains. The grafting density calculated from thermogravimetric analysis showed that a higher grafting density of polystyrene was obtained with lower molecular weight (Mn = 2300 g/mol) than those with higher molecular weight (Mn = 10500 g/mol). Due to the larger steric hindrance, polystyrene with higher molecular weight cannot form a dense shell on the surface of the nanoparticles, which resulted in a lower grafting density. Wide angle X-ray scattering measurements revealed the epsilon cobalt crystalline phases of both superparamagnetic Co NPs coated with polystyrene (Mn = 2300 g/mol) and ferromagnetic Co NPs coated with polystyrene (Mn = 10500 g/mol). Furthermore, a stability study showed that PS-Co NPs prepared with higher polymer concentration and polymer molecular weight exhibited a better stability. N2 - Im Rahmen dieser Arbeit wurden superparamagnetische Cobalt Nanopartikel (NP) synthetisiert, die Selbstassemblierung im Magnetfeld untersucht und die ursprünglichen Liganden Ölsäure (Englisch oleic acid, OA) und Trioctylphosphanoxid (TOPO) ersetzt, um eine Funktionalisierung der Nanopartikel mit einem Temperatur-responsiven Polymer zu erreichen. Außerdem wurden superparamagnetische und ferromagnetische Co NP mit Polystyrol als Stabilisator synthetisiert. Co NP haben aufgrund ihrer herausragenden magnetischen und katalytischen Eigenschaften viele potentielle Anwendungen beispielsweise als Ferrofluide, in der Katalyse und der Magnetresonanztomografie (Englisch magnetic resonance imaging, MRI). Besonders interessant sind dabei superparamagnetische Co NP, die in einem äußeren Magnetfeld magnetisiert werden, aber nach Entfernen des angelegten Magnetfelds keine Magnetisierung mehr aufweisen. Bei biomedizinischen Anwendungen aggregieren sie daher nicht im Körper. Hydrophobe Co NP, die von kleinen Molekülen stabilisiert werden, eignen sich nicht für biologische Anwendungen, für die ein hydrophiles oder wässriges Medium vonnöten ist. Kapitel 3 beschreibt einen Ligandenaustausch zur Funktionalisierung von Co Nanopartikeln und das Herstellen neuer Nanokomposite aus superparamagnetischen Co NP und Temperatur-responsivem PNIPAM. Zunächst wurden wohldefinierte superparamagnetische Co NP mit OA und TOPO als Stabilisatoren durch die Thermolyse von Cobalt Carbonyl synthetisiert. Die ursprünglichen Liganden wurden dann durch einen funktionalen Liganden mit einer Amingruppe (zum Binden an die Oberfläche) und einer 2 Brompropionat-Gruppe (Polymerisationsinitiator) ersetzt. Nach diesem schnellen und einfachen Prozess der Oberflächenfunktionalisierung können die Nanopartikel ohne Aggregation in dem polaren Lösungsmittel DMF dispergiert werden. Nach thermogravimetrischen Messungen konnte die Dichte der Initiatoren mit ungefähr 3,2 Initiatoren / nm2 berechnet werden. Anschließend wurde Oberflächen-initiierte ATRP zur Polymerisation von NIPAM durchgeführt. Temperatur-abhängige Messungen der dynamischen Lichtstreuung der nun in Wasser dispergierbaren Nanokomposite zeigte das reversible Aggregationsverhalten nach Erhitzen über 32 °C. Kapitel 4 behandelt die Untersuchung der Assemblierung von superparamagnetischen OA- und TOPO-stabilisierten Co NP im äußeren Magnetfeld sowohl auf festen Oberflächen als auch der Flüssigkeit-Luft Grenzfläche. Durch die anziehende dipolare Wechselwirkung bildeten sich im äußeren Magnetfeld 1-D Ketten. Der Einfluss der Konzentration der Dispersion und der Stärke des Magnetfelds auf die Morphologie der assemblierten Strukturen wurde untersucht. Bei niedrigerer Konzentration der Dispersion und geringerer Magnetfeldstärke bildeten sich kurze und flexible Ketten. Bei höherer Konzentration oder höherer Magnetfeldstärke wurden die Ketten länger, breiter und gerader. Andererseits sind die induzierten magnetischen Momente bei erhöhter Magnetfeldstärke größer und dominieren über die thermische Fluktuation. Daher verbinden sich die kurzen Ketten zu längeren, und dickere Ketten entstehen durch Interaktion benachbarter Ketten. Außerdem zeigen die induzierten Momente der NP verstärkt in die gleiche Richtung je größer das äußere Magnetfeld ist, weshalb die Ketten gerader werden. Im Vergleich der Assemblierung auf Substraten (TEM-Grids, Siliciumwafer), an der Wasser-Luft und Ethylenglycol-Luft Grenzfläche, zeigte die Assemblierung von Co NP aus Hexan-Dispersion an der Ethylenglycol-Luft Grenzfläche die geordnetsten und homogensten Strukturen. Kapitel 5 präsentierte die Synthese von superparamagnetischen und ferromagnetischen Cobalt Nanopartikeln durch die zwei-stufige Thermolyse von Cobalt Carbonyl (Co2(CO)8) mit Polystyrol als Stabilisator. Polystyrol Polymere mit Amin-Endgruppen wurden durch ATRP-Technik mit unterschiedlichen Molekulargewichten hergestellt. Die Größe, Größenverteilung und magnetischen Eigenschaften der hybriden Partikel haben sich mit dem Molekulargewicht und der Konzentration der Polymer-Stabilisatoren unterschieden. Eine Analyse mit Transmissionselektronenmikroskopie zeigte, dass die Größe der Co NP zwischen 12–22 nm variierte, wenn sie durch Polystyrol geringen Molekulargewichts (Mn = 2300 g/mol) stabilisiert wurden, während sich die Größe der Partikel mit Polystyrol mittleren (Mn = 4500 g/mol) und höheren (Mn = 10500 g/mol) Molekulargewichts kaum unterschied. Messungen der magnetischen Eigenschaften zeigten, dass die kleinen Cobalt Partikel (12 nm) superparamagnetisch waren, während größere Partikel (21 nm) ferromagnetisch waren und zu 1-D Ketten assemblierten. Die Dichte der Polymere auf der Oberfläche wurde nach einer thermogravimetrischen Analyse berechnet. Mit kleinem Molekulargewicht (Mn = 2300 g/mol) wurde eine höhere Dichte erreicht als mit hohem Molekulargewicht (Mn = 10500 g/mol). Durch eine stärker ausgeprägte sterische Hinderung kann ein Polymer hohen Molekulargewichts keine dichte Hülle um die Nanopartikel bilden. Das Vorliegen einer epsilon kristallinen Phase wurde durch Weitwinkel-Röntgenstreuung sowohl für superparamagnetische Co NP (mit PS Mn = 2300 g/mol) als auch ferromagnetische Co NP (mit PS Mn = 10500 g/mol) bestimmt. KW - magnetic nanoparticles KW - assembly KW - polymer KW - cobalt nanoparticles KW - magnetische Nanopartikel KW - Assemblierung KW - Polymer KW - Cobalt Nanopartikeln Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418153 ER - TY - THES A1 - Tang, Jo Sing Julia T1 - Biofunctional polymers for medical applications T1 - Biofunktionale Polymere für medizinische Anwendungen N2 - Carbohydrates are found in every living organism, where they are responsible for numerous, essential biological functions and processes. Synthetic polymers with pendant saccharides, called glycopolymers, mimic natural glycoconjugates in their special properties and functions. Employing such biomimetics furthers the understanding and controlling of biological processes. Hence, glycopolymers are valuable and interesting for applications in the medical and biological field. However, the synthesis of carbohydrate-based materials can be very challenging. In this thesis, the synthesis of biofunctional glycopolymers is presented, with the focus on aqueous-based, protecting group free and short synthesis routes to further advance in the field of glycopolymer synthesis. A practical and versatile precursor for glycopolymers are glycosylamines. To maintain biofunctionality of the saccharides after their amination, regioselective functionalization was performed. This frequently performed synthesis was optimized for different sugars. The optimization was facilitated using a design of experiment (DoE) approach to enable a reduced number of necessary experiments and efficient procedure. Here, the utility of using DoE for optimizing the synthesis of glycosylamines is discussed. The glycosylamines were converted to glycomonomers which were then polymerized to yield biofunctional glycopolymers. Here, the glycopolymers were aimed to be applicable as layer-by-layer (LbL) thin film coatings for drug delivery systems. To enable the LbL technique, complimentary glycopolymer electrolytes were synthesized by polymerization of the glycomonomers and subsequent modification or by post-polymerization modification. For drug delivery, liposomes were embedded into the glycopolymer coating as potential cargo carriers. The stability as well as the integrity of the glycopolymer layers and liposomes were investigated at physiological pH range. Different glycopolymers were also synthesized to be applicable as anti-adhesion therapeutics by providing advanced architectures with multivalent presentations of saccharides, which can inhibit the binding of pathogene lectins. Here, the synthesis of glycopolymer hydrogel particles based on biocompatible poly(N-isopropylacrylamide) (NiPAm) was established using the free-radical precipitation polymerization technique. The influence of synthesis parameters on the sugar content in the gels and on the hydrogel morphology is discussed. The accessibility of the saccharides to model lectins and their enhanced, multivalent interaction were investigated. At the end of this work, the synthesis strategies for the glycopolymers are generally discussed as well as their potential application in medicine. N2 - Kohlenhydrate sind in jedem Lebewesen zu finden, wo sie für zahlreiche, essenzielle biologische Funktionen und Prozesse verantwortlich sind. Synthetische Polymere, die Saccharide tragen, werden Glykopolymere genannt und können natürliche Glykokonjugate in ihren besonderen Eigenschaften und Funktionen nachahmen. Der Einsatz solcher Biomimetika fördert das Verständnis und die Kontrolle biologischer Prozesse. Daher sind Glykopolymere besonders interessant für Anwendungen im medizinischen und biologischen Bereich. Die Synthese von Materialien auf Kohlenhydratbasis kann jedoch eine große Herausforderung darstellen. In dieser Arbeit wird die Synthese biofunktioneller Glykopolymere vorgestellt, wobei der Schwerpunkt auf wässrigen, schutzgruppenfreien und kurzen Synthesewegen liegt, um weitere Fortschritte auf dem Gebiet der Glykopolymersynthese zu erzielen. Ein praktisches und vielseitiges Ausgangsmaterial für Glykopolymere sind Glykosylamine. Um die Biofunktionalität der Saccharide nach deren Aminierung zu erhalten, wurde eine regioselektive Funktionalisierung durchgeführt. Diese häufig durchgeführte Synthese wurde für verschiedene Zucker optimiert. Die Optimierung wurde durch die Anwendung von statistischer Versuchsplanung (Design of Experiments, DoE) vereinfacht, um die Anzahl der erforderlichen Experimente zu reduzieren und ein effizientes Verfahren zu ermöglichen. Hier wird der Nutzen des DoE-Ansatzes für die Optimierung der Synthese von Glykosylaminen diskutiert. Die Glykosylamine wurden in Glykomonomere umgewandelt, die daraufhin polymerisiert wurden, um biofunktionelle Glykopolymere zu erhalten. Die Glykopolymere sollten als Layer-by-Layer (LbL)-Beschichtungen für Drug-Delivery-Systeme anwendbar sein. Um die LbL-Technik zu ermöglichen, wurden komplementäre Glykopolymerelektrolyte durch Polymerisation der Glykomonomere mit anschließender Modifkation oder durch Postpolymerisationsglykosylierung hergestellt. Für die Verabreichung von Arzneimitteln wurden Liposomen als potenzielle Wirkstoffcarrier in die Glykopolymerbeschichtung eingebettet. Die Stabilität sowie die Unversehrtheit der Glykopolymerschichten und Liposomen wurden im physiologischen pH-Bereich nachgewiesen. Abschließend wurden verschiedene Glykopolymere synthetisiert, die als Anti-Adhäsions-Therapeutika anwendbar sein könnten, indem sie komplexe Architekturen mit multivalenter Präsentation von Sacchariden bereitstellen, welche die Bindung von Pathogenenlektinen hemmen können. Hier wurde die Synthese von Glykopolymer-Hydrogelpartikeln auf der Basis von biokompatiblem Poly(N-isopropylacrylamid) (NiPAm) mit Hilfe einer radikalischen Fällungspolymerisation etabliert. Der Einfluss der Syntheseparameter auf den Zuckergehalt in den Gelen und auf die Hydrogelmorphologie wurde diskutiert. Die Zugänglichkeit der Saccharide für Modell-Lektine und ihre verstärkte, multivalente Interaktion wurden untersucht. Zum Abschluss dieser Arbeit werden die Synthesestrategien für die Glykopolymere sowie deren mögliche Anwendung in der Medizin allgemein diskutiert. KW - glycopolymers KW - Glykopolymere KW - glycoconjugates KW - Glykokonjugate KW - glycogels KW - Glykogele KW - layer-by-layer glycopolymer coating KW - Layer-by-Layer Glykopolymerbeschichtung KW - design of experiments KW - statistische Versuchsplanung (Design of Experiments) KW - glycopolymer electrolytes KW - Glykopolymer-Elektrolyt Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-563639 ER - TY - GEN A1 - Tao, Lumi A1 - Liu, Yuchuan A1 - Wu, Dan A1 - Wei, Qiao-Hua A1 - Taubert, Andreas A1 - Xie, Zailai T1 - Luminescent Ionogels with Excellent Transparency, High Mechanical Strength, and High Conductivity T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The paper describes a new kind of ionogel with both good mechanical strength and high conductivity synthesized by confining the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide ([Bmim][NTf₂]) within an organic–inorganic hybrid host. The organic–inorganic host network was synthesized by the reaction of methyltrimethoxysilane (MTMS), tetraethoxysilane (TEOS), and methyl methacrylate (MMA) in the presence of a coupling agent, offering the good mechanical strength and rapid shape recovery of the final products. The silane coupling agent 3-methacryloxypropyltrimethoxysilane (KH-570) plays an important role in improving the mechanical strength of the inorganic–organic hybrid, because it covalently connected the organic component MMA and the inorganic component SiO₂. Both the thermal stability and mechanical strength of the ionogel significantly increased by the addition of IL. The immobilization of [Bmim][NTf₂] within the ionogel provided the final ionogel with an ionic conductivity as high as ca. 0.04 S cm⁻¹ at 50 °C. Moreover, the hybrid ionogel can be modified with organosilica-modified carbon dots within the network to yield a transparent and flexible ionogel with strong excitation-dependent emission between 400 and 800 nm. The approach is, therefore, a blueprint for the construction of next-generation multifunctional ionogels. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1058 KW - ionic liquid KW - ionogel KW - carbon dots KW - organic–inorganic hybrid KW - luminescence KW - mechanical strength Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-487334 SN - 1866-8372 IS - 1058 ER - TY - GEN A1 - Tasior, Mariusz A1 - Bald, Ilko A1 - Deperasińska, Irena A1 - Cywiński, Piotr J. A1 - Gryko, Daniel T. T1 - An internal charge transfer-dependent solvent effect in V-shaped azacyanines N2 - New V-shaped non-centrosymmetric dyes, possessing a strongly electron-deficient azacyanine core, have been synthesized based on a straightforward two-step approach. The key step in this synthesis involves palladium-catalysed cross-coupling of dibromo-N,N′-methylene-2,2′-azapyridinocyanines with arylacetylenes. The resulting strongly polarized π-expanded heterocycles exhibit green to orange fluorescence and they strongly respond to changes in solvent polarity. We demonstrate that differently electron-donating peripheral groups have a significant influence on the internal charge transfer, hence on the solvent effect and fluorescence quantum yield. TD-DFT calculations confirm that, in contrast to the previously studied bis(styryl)azacyanines, the proximity of S1 and T2 states calculated for compounds bearing two 4-N,N-dimethylaminophenylethynyl moieties establishes good conditions for efficient intersystem crossing and is responsible for its low fluorescence quantum yield. Non-linear properties have also been determined for new azacyanines and the results show that depending on peripheral groups, the synthesized dyes exhibit small to large two-photon absorption cross sections reaching 4000 GM. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 306 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102704 SP - 11714 EP - 11720 ER - TY - GEN A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 354 KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400453 ER - TY - THES A1 - ten Brummelhuis, Niels T1 - Self-assembly of cross-linked polymer micelles into complex higher-order aggregates T1 - Selbstorganisation von vernetzten Polymermizellen zu Komplexen Aggregaten mit höherer Ordnung N2 - The creation of complex polymer structures has been one of the major research topics over the last couple of decades. This work deals with the synthesis of (block co-)polymers, the creation of complex and stimuli-responsive aggregates by self-assembly, and the cross-linking of these structures. Also the higher-order self-assembly of the aggregates is investigated. The formation of poly-2-oxazoline based micelles in aqueous solution and their simultaneous functionalization and cross-linking using thiol-yne chemistry is e.g. presented. By introducing pH responsive thiols in the core of the micelles the influence of charged groups in the core of micelles on the entire structure can be studied. The charging of these groups leads to a swelling of the core and a decrease in the local concentration of the corona forming block (poly(2-ethyl-2-oxazoline)). This decrease in concentration yields a shift in the cloud point temperature to higher temperatures for this Type I thermoresponsive polymer. When the swelling of the core is prohibited, e.g. by the introduction of sufficient amounts of salt, this behavior disappears. Similar structures can be prepared using complex coacervate core micelles (C3Ms) built through the interaction of weakly acidic and basic polymer blocks. The advantage of these structures is that two different stabilizing blocks can be incorporated, which allows for more diverse and complex structures and behavior of the micelles. Using block copolymers with either a polyanionic or a polycationic block C3Ms could be created with a corona which contains two different soluble nonionic polymers, which either have a mixed corona or a Janus type corona, depending on the polymers that were chosen. Using NHS and EDC the micelles could easily be cross-linked by the formation of amide bonds in the core of the micelles. The higher-order self-assembly behavior of these core cross-linked complex coacervate core micelles (C5Ms) was studied. Due to the cross-linking the micelles are stabilized towards changes in pH and ionic strength, but polymer chains are also no longer able to rearrange. For C5Ms with a mixed corona likely network structures were formed upon the collapse of the thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm), whereas for Janus type C5Ms well defined spherical aggregates of micelles could be obtained, depending on the pH of the solution. Furthermore it could be shown that Janus micelles can adsorb onto inorganic nanoparticles such as colloidal silica (through a selective interaction between PEO and the silica surface) or gold nanoparticles (by the binding of thiol end-groups). Asymmetric aggregates were also formed using the streptavidin-biotin binding motive. This is achieved by using three out of the four binding sites of streptavidin for the binding of one three-arm star polymer, end-functionalized with biotin groups. A homopolymer with one biotin end-group can be used to occupy the last position. This binding of two different polymers makes it possible to create asymmetric complexes. This phase separation is theoretically independent of the kind of polymer since the structure of the protein is the driving force, not the intrinsic phase separation between polymers. Besides Janus structures also specific cross-linking can be achieved by using other mixing ratios. N2 - In den letzten Jahrzehnten war die Herstellung von komplizierten Polymerstrukturen ein wichtiges Forschungsthema für Polymerchemiker. Diese Arbeit behandelt die Synthese von (Blockco-)Polymere, die Herstellung von komplexen und stimulus-responsiven Aggregaten (Mizellen) durch Selbstorganisation, sowie die Vernetzung dieser Strukturen. Auch die Anordnung dieser Mizellen zu Aggregaten mit höherer Ordnung wurde untersucht. Zum Beispiel wird die Bildung von Poly(2-oxazolin) basierter Mizellen in wässriger Lösung und die gleichzeitige Funktionalisierung und Vernetzung dieser Mizellen mittels Thiol-In-Chemie beschrieben. Durch die Einführung von pH-responsiven Gruppen in den Kern der Mizellen konnte der Einfluss von geladenen Gruppen im Kern auf das gesamte Aggregat untersucht werden. Das Einführen von Ladung führt zum Quellen des Mizellkerns und damit zu einer niedrigeren lokalen Konzentration von wasserlöslichem Poly(2-ethyl-2-oxazolin) (PEtOx). Diese niedrigere Konzentration ergibt eine Verschiebung des Trübungspunkt dieses Typ I thermoresponsiven Polymers zu höheren Temperaturen. Wenn die Ausdehnung des Kerns nicht erfolgt, z.B. in Anwesenheit einer hohen Salzkonzentration, findet dieser Effekt nicht statt. Ähnliche Strukturen können mithilfe von Mizellen mit komplexen Koazervatkern (English: Complex Coacervate Core Micelles, C3Ms) durch die Interaktion zwischen Polymeren mit negativ und positiv geladenen Blöcken hergestellt werden. Der Vorteil dieser Strukturen ist, dass zwei verschiedene stabilisierende Polymerblöcke in einem Aggregat vereint werden können, was zur Bildung einer Vielzahl noch komplizierterer Strukturen und zu mehr Responsivität führen kann. Mithilfe von Blockcopolymeren, bestehend aus jeweils einen polyionischen Block und einem neutralen Block (z.B. PEtOx, PEO oder poly(N-isopropylacrylamid) (PNIPAAm)), konnten C3Ms hergestellt werden, in denen zwei neutrale Polymere vereint wurden. Es konnte gezeigt werden, dass diese Polymere sowohl gemischt als auch phasensepariert vorliegen können (letzteres ergibt Janus Mizellen), abhängig welche Polymere gewählt werden. Durch Vernetzung im Kern konnten die Mizellen stabilisiert und fixiert werden (C5Ms). Die Selbstanordnung dieser vernetzten Mizellen zu größeren Aggregaten wurde untersucht. Wenn eine Lösung mit vernetzten Mizellen über den Trübungspunkt von PNIPAAm erhitzt wurde, bildeten sich Netzwerke aus Mizellen mit einer gemischten Korona, während Janus Mizellen sich zu wohldefinierten Aggregaten höherer Ordnung anordneten. Weiterhin konnte gezeigt werden, dass Janus Mizellen sich auf der Oberfläche von anorganischen Nanopartikeln anlagern können; z.B. durch die selektive Wechselwirkung zwischen PEO und Silica oder durch die Adsorption von Thiolgruppen auf Gold-Nanopartikeln. Asymmetrische Aggregate konnten auch mithilfe des Streptavidin-Biotin Komplexes erhalten werden. Durch das Binden der Biotin-Endgruppen eines dreiarmigen Sternpolymeren an eine Streptavidin-Einheit und anschließende Belegung der verbliebenen Bindungsstelle mit der Biotin-gruppe eines Homopolymers, können sehr spezifisch zwei verschiedene Polymere in einem Janus Aggregat vereint werden. Auch die Vernetzung des Streptavidins kann erzielt werden, indem andere Mischverhältnisse gewählt werden. KW - Polymerchemie KW - Selbstorganisation KW - Mizellen KW - Janus KW - Vernetzung KW - Polymer chemistry KW - self-assembly KW - micelles KW - Janus KW - cross-linking Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52320 ER - TY - GEN A1 - Thete, Aniket A1 - Rojas, Oscar A1 - Neumeyer, David A1 - Koetz, Joachim A1 - Dujardin, Erik T1 - Ionic liquid-assisted morphosynthesis of gold nanorods using polyethyleneimine-capped seeds N2 - Seed-mediated gold nanorods with tunable lengths are prepared using new polyethyleneimine-capped gold nanoparticles synthesized in ionic liquid. The effect of polyethyleneimine and ionic liquid during nanorod growth is investigated and shows a marked effect on their final aspect ratio. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 245 KW - aqueous-solution KW - aspect-ratio KW - cationic surfactants KW - chemical-synthesis KW - delivery KW - metal nanoparticles KW - mixtures KW - shape KW - silver nanowires KW - surface-plasmon resonance Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-95196 SP - 14294 EP - 14298 ER - TY - GEN A1 - Thiel, Kerstin A1 - Zehbe, Rolf A1 - Roeser, Jerômé A1 - Strauch, Peter A1 - Enthaler, Stephan A1 - Thomas, Arne T1 - A polymer analogous reaction for the formation of imidazolium and NHC based porous polymer networks N2 - A polymer analogous reaction was carried out to generate a porous polymeric network with N-heterocyclic carbenes (NHC) in the polymer backbone. Using a stepwise approach, first a polyimine network is formed by polymerization of the tetrafunctional amine tetrakis(4-aminophenyl)methane. This polyimine network is converted in the second step into polyimidazolium chloride and finally to a polyNHC network. Furthermore a porous Cu(II)-coordinated polyNHC network can be generated. Supercritical drying generates polymer networks with high permanent surface areas and porosities which can be applied for different catalytic reactions. The catalytic properties were demonstrated for example in the activation of CO2 or in the deoxygenation of sulfoxides to the corresponding sulfides. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 243 KW - covalent organic framework KW - n-heterocyclic carbenes KW - carbon-dioxide KW - intrinsic microporosity KW - heterogeneous catalysis KW - sulfoxides KW - reduction KW - complex KW - system KW - transformation Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-95118 SP - 1848 EP - 1856 ER - TY - THES A1 - Titirici, Maria-Magdalena T1 - Hydrothermal carbonisation T1 - Hydrothermale Karbonisierung BT - A sustainable alternative to versatile carbon materials BT - Eine nachhaltige Alternative zu Kohle N2 - The world’s appetite for energy is producing growing quantities of CO2, a pollutant that contributes to the warming of the planet and which currently cannot be removed or stored in any significant way. Other natural reserves are also being devoured at alarming rates and current assessments suggest that we will need to identify alternative sources in the near future. With the aid of materials chemistry it should be possible to create a world in which energy use needs not be limited and where usable energy can be produced and stored wherever it is needed, where we can minimize and remediate emissions as new consumer products are created, whilst healing the planet and preventing further disruptive and harmful depletion of valuable mineral assets. In achieving these aims, the creation of new and very importantly greener industries and new sustainable pathways are crucial. In all of the aforementioned applications, new materials based on carbon, ideally produced via inexpensive, low energy consumption methods, using renewable resources as precursors, with flexible morphologies, pore structures and functionalities, are increasingly viewed as ideal candidates to fulfill these goals. The resulting materials should be a feasible solution for the efficient storage of energy and gases. At the end of life, such materials ideally must act to improve soil quality and to act as potential CO2 storage sinks. This is exactly the subject of this habilitation thesis: an alternative technology to produce carbon materials from biomass in water using low carbonisation temperatures and self-generated pressures. This technology is called hydrothermal carbonisation. It has been developed during the past five years by a group of young and talented researchers working under the supervision of Dr. Titirici at the Max-Planck Institute of Colloids and Interfaces and it is now a well-recognised methodology to produce carbon materials with important application in our daily lives. These applications include electrodes for portable electronic devices, filters for water purification, catalysts for the production of important chemicals as well as drug delivery systems and sensors. N2 - Der stets wachsende globale Energiebedarf führt zu immer weiter zunehmenden Emissionen von Kohlenstoffdioxid, einem umweltschädlichen Gas, das als eines der Hauptprobleme im weltweiten Klimawandel darstellt. Bislang ist es jedoch nicht möglich, dieses Kohlenstoffdioxid in sinnvoller Weise zu verwerten oder einzulagern. Zudem existieren weitere Probleme in der globalen Energieversorgung, da viele natürlich vorkommende Rohstoffe sehr schnell ausgebeutet werden, so dass in naher Zukunft dringend alternative Energiequellen gefunden werden müssen, um den aktuellen Problemen zu begegnen. Der Wissenschaftszweig der Materialchemie zielt in diesem Zusammenhang darauf ab, dazu beizutragen, die bestehende Energieinfrastruktur nachhaltig zu verändern. Dabei stehen verschiedene Aspekte im Vordergrund: Energie sollte in allen gewünschten Mengen jederzeit verfügbar und auch speicherbar sein. Zudem sollte ihre Erzeugung ohne umweltschädliche Abfallprodukte ablaufen. Tiefgreifende Eingriffe in die Umwelt, v.a. durch den übermäßigen Abbau von Rohstoffen, sollte nicht mehr erforderlich sein. Auf diese Weise können die Folgen des bisherigen Klimawandels eingedämmt werden und neue Schäden an der Umwelt vermieden werden. Neue, grüne Industrie- und Energieprozesse schützen hier also nachhaltig den Planeten. Bei der Forschung an nachhaltigen Formen der Energieversorgung beschäftigen sich Materialchemiker in mannigfaltiger Weise mit Kohlenstoffmaterialien. Diese sollten idealerweise kostengünstig und ohne hohen Energiebedarf produziert werden können. Am vielversprechendsten sind Materialien, die eine flexibel gestaltbare Morphologie besitzen, d.h. die besondere strukturelle Eigenschaften besitzen, wie z.B. Porosität oder chemisch veränderte und damit funktionale Oberflächen. Idealerweise sollten solche neu entwickelten Materialien nicht nur als Speicher von Energie oder Energieträgern dienen, sondern auch nach ihrer Lebensdauer als funktionales Material zur Verbesserung der Bodenqualität eingesetzt werden können und dort noch weiter als potentielle Senke für Kohlenstoffdioxid dienen können. Die zuvor beschriebenen Themen und Probleme stellen den Gegenstand der vorliegenden Habilitationsschrift dar: die Entwicklung einer alternativen Methode zur Herstellung von Kohlenstoffmaterialien aus Biomasse in Wasser bei geringen Temperaturen. Dabei handelt es sich um die sogenannte hydrothermale Karbonisierung, die in den letzten fünf Jahren von einer Gruppe junger, talentierter Wissenschaftler unter der Anleitung von Frau Dr. Titirici am Max-Planck-Institut für Kolloid- und Grenzflächenforschung erarbeitet und weiterentwickelt wurde zu einer heutzutage anerkannten und verbreiteten Methode. Zudem wurden die über diesen Weg gewonnenen Materialien erfolgreich in zahlreichen, für den Alltag wichtigen Anwendungen eingesetzt, so z.B. als Elektroden in tragbaren elektronischen Geräten, als Filtermaterialien für die Aufreinigung kontaminierten Wassers, als Katalysatoren für wichtige chemische Reaktionen, als Trägermaterial für Arzneimittel und als Sensoren. KW - Hydrothermale Karbonisierung KW - Kohlenstoffe auf Biomasse-Basis KW - hydrothermal carbonization KW - biomass-derived carbons Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66885 ER - TY - THES A1 - Titov, Evgenii T1 - Quantum chemistry and surface hopping dynamics of azobenzenes T1 - Quantenchemie und Surface Hopping Dynamik von Azobenzolen BT - free and constrained models BT - freie und eingeschränkte Modelle N2 - This cumulative doctoral dissertation, based on three publications, is devoted to the investigation of several aspects of azobenzene molecular switches, with the aid of computational chemistry. In the first paper, the isomerization rates of a thermal cis → trans isomerization of azobenzenes for species formed upon an integer electron transfer, i.e., with added or removed electron, are calculated from Eyring’s transition state theory and activation energy barriers, computed by means of density functional theory. The obtained results are discussed in connection with an experimental study of the thermal cis → trans isomerization of azobenzene derivatives in the presence of gold nanoparticles, which is demonstrated to be greatly accelerated in comparison to the same isomerization reaction in the absence of nanoparticles. The second paper is concerned with electronically excited states of (i) dimers, composed of two photoswitchable units placed closely side-by-side, as well as (ii) monomers and dimers adsorbed on a silicon cluster. A variety of quantum chemistry methods, capable of calculating molecular electronic absorption spectra, based on density functional and wave function theories, is employed to quantify changes in optical absorption upon dimerization and covalent grafting to a surface. Specifically, the exciton (Davydov) splitting between states of interest is determined from first-principles calculations with the help of natural transition orbital analysis, allowing for insight into the nature of excited states. In the third paper, nonadiabatic molecular dynamics with trajectory surface hopping is applied to model the photoisomerization of azobenzene dimers, (i) for the isolated case (exhibiting the exciton coupling between two molecules) as well as (ii) for the constrained case (providing the van der Waals interaction with environment in addition to the exciton coupling between two monomers). For the latter, the additional azobenzene molecules, surrounding the dimer, are introduced, mimicking a densely packed self-assembled monolayer. From obtained results it is concluded that the isolated dimer is capable of isomerization likewise the monomer, whereas the steric hindrance considerably suppresses trans → cis photoisomerization. Furthermore, the present dissertation comprises the general introduction describing the main features of the azobenzene photoswitch and objectives of this work, theoretical basis of the employed methods, and discussion of gained findings in the light of existing literature. Also, additional results on (i) activation parameters of the thermal cis → trans isomerization of azobenzenes, (ii) an approximate scheme to account for anharmonicity of molecular vibrations in calculation of the activation entropy, as well as (iii) absorption spectra of photoswitch–silicon composites obtained from time-demanding wave function-based methods are presented. N2 - Die vorliegende kumulative Dissertationsschrift basiert auf drei wissenschaftlichen Publikationen und beschäftigt sich mit der computerchemischen Erforschung von molekularen Azobenzol-Schaltern. Die erste Publikation behandelt die thermische cis → trans Isomerisierung von Azobenzol durch einen Elektronentransfer (ein Elektron wird hinzugefügt oder entnommen). Dabei ist die Berechnung der Isomerisierungsrate des Elektronenübergangs nach der Eyringschen Theorie des Übergangszustands unter Einsatz von Aktivierungsenenergien durchgeführt worden. Die Letzteren sind mittels Dichtefunktionaltheorie berechnet worden. Die daraus erhaltenen Ergebnisse sind in Zusammenhang mit experimentellen Untersuchungen der thermische cis → trans Isomerisierung von Azobenzol-Derivaten in Lösung mit und ohne Goldnanopartikeln diskutiert worden. Die thermische Isomerisierung in Anwesenheit der Goldnanopartikeln läuft stark beschleunigt ab. Die zweite Publikation beschäftigt sich mit elektronisch angeregten Zuständen von (i) Dimeren bestehend aus zwei schaltbaren Einheiten, die dicht nebeneinander platziert sind, sowie (ii) Monomeren und Dimeren, die an einen Siliziumcluster adsorbiert sind. Mehrere quantenchemische Methoden basierend auf Dichtefunktionaltheorie und Wellenfunktionstheorie sind zur Berechnung der molekularen elektronischen Absorptionsspektren verwendet worden. Dadurch sind die Änderungen in der optischen Absorption sowohl bei der Dimerisierung, als auch beim kovalenten Anbinden an die Oberfläche bestimmt worden. Dazu ist die exzitonische Aufspaltung (Davydov splitting) zwischen den angeregten Zuständen aus ersten Prinzipien unter Verwendung von speziellen Orbitalen für Übergangszustände (natural transition orbitals) berechnet worden. Dadurch wird ein Einblick in die Natur der angeregten Zuständen erreicht. In der dritten Publikation ist eine nicht-adiabatische Molekulardynamik-Simulation unter Anwendung von trajectory surface hopping durchgeführt worden, um die Photoisomerisirung von Azobenzol-Dimeren zu modellieren. Dabei sind (i) ein isoliertes sowie (ii) ein Dimer in der Monolage betrachtet worden. Es sind die exzitonische Kopplung zwischen den zwei Molekülen, sowie, im Falle der Monolage, auch Van-der-Waals-Wechselwirkungen berücksicht worden. Die Ergebnisse weisen darauf hin, dass ein isoliertes Dimer gleichermaßen isomerisierungsfähig wie ein Monomer ist, wobei die cis → trans Photoisomerisierung durch die sterische Hinderung erheblich unterdrückt wird. Außerdem beinhaltet die darliegende Dissertationsschrift eine allgemeine Einführung, theoretische Grundlagen der verwendeten Methoden und die Diskussion der erhaltenen Ergebnisse mit Blick auf die vorhandene Literatur. Ferner sind zusätzliche Ergebnisse bezüglich der folgenden Aspekte dargestellt: (i) Aktivierungsparameter der thermischen cis → trans Isomerisierung von Azobenzol; (ii) ein Näherungsverfahren zur Berücksichtigung der Anharmonizität von Molekülschwingungen bei Berechnung der Aktivierungsentropie; (iii) Absorptionspektren von Photoschalter-Silizium-Kompositen berechnet mithilfe von zeitaufwändigen Wellenfunktions-basierten Methoden. KW - quantum chemistry KW - surface hopping dynamics KW - azobenzene KW - Quantenchemie KW - Surface Hopping Dynamik KW - Azobenzol Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394610 ER - TY - GEN A1 - Tremblay, Jean Christophe A1 - Blanco-Rey, Maria T1 - Manipulating interfacial hydrogens at palladium via STM N2 - In this contribution, we provide a detailed dynamical analysis of the interfacial hydrogen migration mediated by scanning tunneling microscopy (STM). Contributions from the STM-current and from the non-adiabatic couplings are taken into account using only first principle models. The slight asymmetry of the tunnelling rates with respect to the potential bias sign inferred from experimental observations is reproduced by weighting the contributions of the metal acceptor–donor states for the propagation of the impinging electrons. The quasi-thermal inelastic collision mechanism is treated perturbatively. The influence of hydrogen pre-coverage is also investigated using new potential energy surfaces obtained from periodic density functional theory calculations. Fully quantum dynamical simulations of the system evolution are performed by solving the Pauli master equation, providing insight into the reaction mechanism of STM manipulation of subsurface hydrogens. It is observed that the hydrogen impurity favors resurfacing over occupation of the bulk and subsurface sites whenever possible. The present simulations give strong indication that the experimentally observed protuberances after STM-excitation are due to hydrogen accumulating in the vicinity of the surface. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 291 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-99511 ER - TY - GEN A1 - Tsukamoto, Junko A1 - Heabel, Sophie A1 - Valenca, Gustavo P. A1 - Peter, Martin A1 - Franco, Telma T1 - Enzymatic direct synthesis of acrylic acid esters of mono- and disaccharides N2 - BACKGROUND: There is an increased need to replace materials derived from fossil sources by renewables. Sugar-cane derived carbohydrates are very abundant in Brazil and are the cheapest sugars available in the market, with more than 400 million tons of sugarcane processed in the year 2007. The objective of this work was to study the preparation of sugar acrylates from free sugars and free acrylic acid, thus avoiding the previous preparation of protected sugar derivatives, such as glycosides, or activated acrylates, such as vinyl acrylate. RESULTS: Lipase catalyzed esterification of three mono- and two disaccharides with acrylic acid, in the presence or absence of molecular sieves was investigated. The reactions were monitored by high-performance liquid chromatography (HPLC) and the products were analyzed by matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry. The main products are mono- and diacrylates, while higher esters are formed as minor products. The highest conversion to sugar acrylates was observed for the D-glucose and D-fructose, followed by D-xylose and D-maltose. Molecular sieves had no pronounced effect on the conversion CONCLUSIONS: A feasible method is described to produce and to characterize sugar acrylates, including those containing more than two acrylate groups. The process for production of these higher esters could potentially be optimized further to produce molecules for cross-linking in acrylate polymerization and other applications. The direct enzymatic esterification of free carbohydrates with acrylic acid is unprecedented. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 106 KW - carbohydrate esters KW - enzymatic esterification KW - acrylic acid esters KW - MALDI-TOF mass spectrometry Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-42652 ER - TY - GEN A1 - Tsukruk, Vladimir A1 - Mischenko, Nikolay A1 - Köberle, Peter A1 - Laschewsky, André T1 - The structural order of some novel ionic polymers; 2. : Models of molecular packing N2 - The molecular packing and spatial correlations of two isomeric zwitterionic polymethacrylates and one polyacrylate analog are studied by means of X-ray analysis and conformational calculations. The analysis of the correlation functions and density distribution profiles suggest a double-layered molecular packing which is discussed for the three polymers investigated, with respect to their different chemical structures. Whereas the zwitterionic polymethacrylates studied exhibit liquid-like short-range order, the polyacrylate analog exhibits an ordered double-layered superstructure. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 096 Y1 - 1992 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17256 ER - TY - THES A1 - Tzoneva-Velinova, Rumiana T1 - The wettability of biomaterials determines the protein adsorption and the cellular responses N2 - During the past several decades polymer materials become widely used as components of medical devices and implants such as hemodialysers, bioartificial organs as well as vascular and recombinant surgery. Most of the devices cannot avoid the blood contact in their use. When the polymer materials come in contact with blood they can cause different undesired host responses like thrombosis, inflammatory reactions and infections. Thus the materials must be hemocompatible in order to minimize these undesired body responses. The earliest and one of the main problems in the use of blood-contacting biomaterials is the surface induced thrombosis. The sequence of the thrombus formation on the artificial surfaces has been well established. The first event, which occurs, after exposure of biomaterials to blood, is the adsorption of blood proteins. Surface physicochemical properties of the materials as wettability greatly influence the amount and conformational changes of adsorbed proteins. In turn the type, amount and conformational state of the adsorbed protein layer determines whether platelets will adhere and become activated or not on the artificial surface and thus to complete the thrombus formation. The adsorption of fibrinogen (FNG), which is present in plasma, has been shown to be closely related to surface induced thrombosis by participating in all processes of the thrombus formation such as fibrin formation, platelet adhesion and aggregation. Therefore study the FNG adsorption to artificial surfaces could contribute to better understanding of the mechanisms of platelet adhesion and activation and thus to controlling the surface induced thrombosis. Endothelization of the polymer surfaces is one of the strategies for improving the materials hemocompatibility, which is believed to be the most ideal solution for making truly blood-compatible materials. Since at physiological conditions proteins such as FNG and fibronectin (FN) are the usual extracellular matrix (ECM) for endothelial cells (EC) adhesion, precoating of the materials with these proteins has been shown to improve EC adhesion and growth in vitro. ECM proteins play an essential role not only like a structural support for cell adhesion and spreading, but also they are important factor in transmitting signals for different cell functions. The ability of cells to remodel plasma proteins such as FNG and FN in matrix-like structures together with the classical cell parameters such as actin cytoskeleton and focal adhesion formation could be used as an criteria for proper cell functioning. The establishment and the maintaining of delicate balance between cell-cell and cell-substrate contacts is another important factor for better EC colonization of the implants. The functionality of newly established endothelium in order to produce antithromotic substances should be always considered when EC seeding is used for improving the hemocompatibility of the polymer materials. Controlling the polymer surface properties such as surface wettability represents a versatile approach to manipulate the above cellular responses and therefore can be used in biomaterial and tissue engineering applications for producing better hemocompatible materials. KW - wettability KW - hemocompatibility KW - extracellular matrix proteins KW - endothelization Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001103 ER - TY - GEN A1 - Töpfer, Kai A1 - Tremblay, Jean Christophe T1 - How surface reparation prevents catalytic oxidation of carbon monoxide on atomic gold at defective magnesium oxide surfaces N2 - In this contribution, we study using first principles the co-adsorption and catalytic behaviors of CO and O2 on a single gold atom deposited at defective magnesium oxide surfaces. Using cluster models and point charge embedding within a density functional theory framework, we simulate the CO oxidation reaction for Au1 on differently charged oxygen vacancies of MgO(001) to rationalize its experimentally observed lack of catalytic activity. Our results show that: (1) co-adsorption is weakly supported at F0 and F2+ defects but not at F1+ sites, (2) electron redistribution from the F0 vacancy via the Au1 cluster to the adsorbed molecular oxygen weakens the O2 bond, as required for a sustainable catalytic cycle, (3) a metastable carbonate intermediate can form on defects of the F0 type, (4) only a small activation barrier exists for the highly favorable dissociation of CO2 from F0, and (5) the moderate adsorption energy of the gold atom on the F0 defect cannot prevent insertion of molecular oxygen inside the defect. Due to the lack of protection of the color centers, the surface becomes invariably repaired by the surrounding oxygen and the catalytic cycle is irreversibly broken in the first oxidation step. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 325 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394978 ER - TY - THES A1 - Ulaganathan, Vamseekrishna T1 - Molecular fundamentals of foam fractionation T1 - Molekulare Grundlagen der Schaumfraktionierung N2 - Foam fractionation of surfactant and protein solutions is a process dedicated to separate surface active molecules from each other due to their differences in surface activities. The process is based on forming bubbles in a certain mixed solution followed by detachment and rising of bubbles through a certain volume of this solution, and consequently on the formation of a foam layer on top of the solution column. Therefore, systematic analysis of this whole process comprises of at first investigations dedicated to the formation and growth of single bubbles in solutions, which is equivalent to the main principles of the well-known bubble pressure tensiometry. The second stage of the fractionation process includes the detachment of a single bubble from a pore or capillary tip and its rising in a respective aqueous solution. The third and final stage of the process is the formation and stabilization of the foam created by these bubbles, which contains the adsorption layers formed at the growing bubble surface, carried up and gets modified during the bubble rising and finally ends up as part of the foam layer. Bubble pressure tensiometry and bubble profile analysis tensiometry experiments were performed with protein solutions at different bulk concentrations, solution pH and ionic strength in order to describe the process of accumulation of protein and surfactant molecules at the bubble surface. The results obtained from the two complementary methods allow understanding the mechanism of adsorption, which is mainly governed by the diffusional transport of the adsorbing protein molecules to the bubble surface. This mechanism is the same as generally discussed for surfactant molecules. However, interesting peculiarities have been observed for protein adsorption kinetics at sufficiently short adsorption times. First of all, at short adsorption times the surface tension remains constant for a while before it decreases as expected due to the adsorption of proteins at the surface. This time interval is called induction time and it becomes shorter with increasing protein bulk concentration. Moreover, under special conditions, the surface tension does not stay constant but even increases over a certain period of time. This so-called negative surface pressure was observed for BCS and BLG and discussed for the first time in terms of changes in the surface conformation of the adsorbing protein molecules. Usually, a negative surface pressure would correspond to a negative adsorption, which is of course impossible for the studied protein solutions. The phenomenon, which amounts to some mN/m, was rather explained by simultaneous changes in the molar area required by the adsorbed proteins and the non-ideality of entropy of the interfacial layer. It is a transient phenomenon and exists only under dynamic conditions. The experiments dedicated to the local velocity of rising air bubbles in solutions were performed in a broad range of BLG concentration, pH and ionic strength. Additionally, rising bubble experiments were done for surfactant solutions in order to validate the functionality of the instrument. It turns out that the velocity of a rising bubble is much more sensitive to adsorbing molecules than classical dynamic surface tension measurements. At very low BLG or surfactant concentrations, for example, the measured local velocity profile of an air bubble is changing dramatically in time scales of seconds while dynamic surface tensions still do not show any measurable changes at this time scale. The solution’s pH and ionic strength are important parameters that govern the measured rising velocity for protein solutions. A general theoretical description of rising bubbles in surfactant and protein solutions is not available at present due to the complex situation of the adsorption process at a bubble surface in a liquid flow field with simultaneous Marangoni effects. However, instead of modelling the complete velocity profile, new theoretical work has been started to evaluate the maximum values in the profile as characteristic parameter for dynamic adsorption layers at the bubble surface more quantitatively. The studies with protein-surfactant mixtures demonstrate in an impressive way that the complexes formed by the two compounds change the surface activity as compared to the original native protein molecules and therefore lead to a completely different retardation behavior of rising bubbles. Changes in the velocity profile can be interpreted qualitatively in terms of increased or decreased surface activity of the formed protein-surfactant complexes. It was also observed that the pH and ionic strength of a protein solution have strong effects on the surface activity of the protein molecules, which however, could be different on the rising bubble velocity and the equilibrium adsorption isotherms. These differences are not fully understood yet but give rise to discussions about the structure of protein adsorption layer under dynamic conditions or in the equilibrium state. The third main stage of the discussed process of fractionation is the formation and characterization of protein foams from BLG solutions at different pH and ionic strength. Of course a minimum BLG concentration is required to form foams. This minimum protein concentration is a function again of solution pH and ionic strength, i.e. of the surface activity of the protein molecules. Although at the isoelectric point, at about pH 5 for BLG, the hydrophobicity and hence the surface activity should be the highest, the concentration and ionic strength effects on the rising velocity profile as well as on the foamability and foam stability do not show a maximum. This is another remarkable argument for the fact that the interfacial structure and behavior of BLG layers under dynamic conditions and at equilibrium are rather different. These differences are probably caused by the time required for BLG molecules to adapt respective conformations once they are adsorbed at the surface. All bubble studies described in this work refer to stages of the foam fractionation process. Experiments with different systems, mainly surfactant and protein solutions, were performed in order to form foams and finally recover a solution representing the foamed material. As foam consists to a large extent of foam lamella – two adsorption layers with a liquid core – the concentration in a foamate taken from foaming experiments should be enriched in the stabilizing molecules. For determining the concentration of the foamate, again the very sensitive bubble rising velocity profile method was applied, which works for any type of surface active materials. This also includes technical surfactants or protein isolates for which an accurate composition is unknown. N2 - Die Fraktionierung ist ein Trennprozess, bei dem verschiedene Materialien auf Grund ihrer Eigenschaften voneinander getrennt werden. Bei der Sedimentation von Teilchen in einer Flüssigkeit dient deren unterschiedliche Dichte zu ihrer Trennung, da schwere Teilchen schneller auf den Boden des Gefäßes sinken als leichtere. Bei der Schaumfraktionierung als Trennprozess dient zur Trennung verschiedener Moleküle in einer Lösung deren Grenzflächenaktivität, d.h. das unterschiedliche Vermögen der Moleküle, sich an der Oberfläche von Gasblasen anzureichern. Durch das Aufsteigen der Blasen in der Flüssigkeit werden daher die Moleküle mit der höheren Grenzflächenaktivität stärker in der Schaumschicht angereichert als die weniger stark grenzflächenaktiven Komponenten. Ziel der vorliegenden Dissertation ist es, den Prozess der Schaumfraktionierung hinsichtlich der Trennung von grenzflächenaktiven Molekülen zu analysieren. Die Bildung von Blasen und deren anschließendes Aufsteigen in der Lösung kann als wichtigstes Element in diesem Prozess angesehen werden. Es ist bekannt, dass die Geschwindigkeit aufsteigender Luftblasen in Wasser eine charakteristische Größe ist, die durch die Anwesenheit grenzflächenaktiver Stoffe (Tenside, Proteine) stark verringert wird. Die vorliegende Dissertation zeigt für das ausgewählte Protein ß-Lactoglobulin und für verschiedene Lebensmittel-Tenside, dass die Messung der Aufstiegsgeschwindigkeit von Luftblasen zur Beurteilung der Anreicherung dieser Moleküle an der Blasenoberfläche ausgezeichnet geeignet ist. Die experimentellen Ergebnisse bei verschiedenen Lösungsbedingungen, wie Konzentration von Protein bzw. Tensid, pH-Wert und Ionenstärke der Lösung, zeigen deutlich, dass die Anreicherung der Proteinmoleküle wesentlich stärker ist als die von Tensiden. Dies gilt auch für Tenside mit einer sehr hohen Grenzflächenaktivität, was im Wesentlichen durch die extrem feste (nahezu irreversible) Anreicherung der Proteinmoleküle zu erklären ist. Die erzielten experimentellen Ergebnisse dienen jetzt als Grundlage für die Weiterentwicklung der Theorie aufsteigender Blasen, die besonders von der Dynamik der Anreicherung der Moleküle geprägt ist. Neueste Untersuchungen haben gezeigt, dass auf der Grundlage dieser experimentellen Ergebnisse erstmals die Geschwindigkeitskonstanten der Anreicherung (Adsorption und Desorption) unabhängig voneinander ermittelt werden können. KW - adsorption KW - air-water interface KW - protein KW - foam KW - rising bubble KW - Adsorption KW - Wasser/Luft Grenzflächen KW - steigende Blasen KW - Schaum KW - Beta-Lactoglobulin Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94263 ER - TY - GEN A1 - Unterberg, Marlies A1 - Leffers, Larissa A1 - Hübner, Florian A1 - Humpf, Hans-Ulrich A1 - Lepikhov, Konstantin A1 - Walter, Jörn A1 - Ebert, Franziska A1 - Schwerdtle, Tanja T1 - Toxicity of arsenite and thio-DMAV after long-term (21 days) incubation of human urothelial cells: cytotoxicity, genotoxicity and epigenetics N2 - This study aims to further mechanistically understand toxic modes of action after chronic inorganic arsenic exposure. Therefore long-term incubation studies in cultured cells were carried out, to display chronically attained changes, which cannot be observed in the generally applied in vitro short-term incubation studies. Particularly, the cytotoxic, genotoxic and epigenetic effects of an up to 21 days incubation of human urothelial (UROtsa) cells with pico- to nanomolar concentrations of iAsIII and its metabolite thio-DMAV were compared. After 21 days of incubation, cytotoxic effects were strongly enhanced in the case of iAsIII and might partly be due to glutathione depletion and genotoxic effects on the chromosomal level. These results are in strong contrast to cells exposed to thio-DMAV. Thus, cells seemed to be able to adapt to this arsenical, as indicated among others by an increase in the cellular glutathione level. Most interestingly, picomolar concentrations of both iAsIII and thio-DMAV caused global DNA hypomethylation in UROtsa cells, which was quantified in parallel by 5-medC immunostaining and a newly established, reliable, high resolution mass spectrometry (HRMS)-based test system. This is the first time that epigenetic effects are reported for thio-DMAV; iAsIII induced epigenetic effects occur in at least 8000 fold lower concentrations as reported in vitro before. The fact that both arsenicals cause DNA hypomethylation at really low, exposure-relevant concentrations in human urothelial cells suggests that this epigenetic effect might contribute to inorganic arsenic induced carcinogenicity, which for sure has to be further investigated in future studies. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 178 KW - induced malignant-transformation KW - genomic dna methylation KW - vitro toxicological characterization KW - thio-dimethylarsinic acid KW - bladder-cancer KW - methyltransferases dnmt3a KW - cytosine methylation KW - carcinogen exposure KW - mass-spectrometry KW - gene-expression Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-76239 SP - 456 EP - 464 ER - TY - THES A1 - Vacogne, Charlotte D. T1 - New synthetic routes towards well-defined polypeptides, morphologies and hydrogels T1 - Neue Syntheserouten zu wohldefinierten Polypeptiden, Morphologien und Hydrogelen N2 - Proteins are natural polypeptides produced by cells; they can be found in both animals and plants, and possess a variety of functions. One of these functions is to provide structural support to the surrounding cells and tissues. For example, collagen (which is found in skin, cartilage, tendons and bones) and keratin (which is found in hair and nails) are structural proteins. When a tissue is damaged, however, the supporting matrix formed by structural proteins cannot always spontaneously regenerate. Tailor-made synthetic polypeptides can be used to help heal and restore tissue formation. Synthetic polypeptides are typically synthesized by the so-called ring opening polymerization (ROP) of α-amino acid N-carboxyanhydrides (NCA). Such synthetic polypeptides are generally non-sequence-controlled and thus less complex than proteins. As such, synthetic polypeptides are rarely as efficient as proteins in their ability to self-assemble and form hierarchical or structural supramolecular assemblies in water, and thus, often require rational designing. In this doctoral work, two types of amino acids, γ-benzyl-L/D-glutamate (BLG / BDG) and allylglycine (AG), were selected to synthesize a series of (co)polypeptides of different compositions and molar masses. A new and versatile synthetic route to prepare polypeptides was developed, and its mechanism and kinetics were investigated. The polypeptide properties were thoroughly studied and new materials were developed from them. In particular, these polypeptides were able to aggregate (or self-assemble) in solution into microscopic fibres, very similar to those formed by collagen. By doing so, they formed robust physical networks and organogels which could be processed into high water-content, pH-responsive hydrogels. Particles with highly regular and chiral spiral morphologies were also obtained by emulsifying these polypeptides. Such polypeptides and the materials derived from them are, therefore, promising candidates for biomedical applications. N2 - Proteine, auch Polypeptide genannt, sind große Biomoleküle, die aus kleineren Aminosäuren bestehen. Diese sind zu langen Ketten miteinander verbunden, wie die Perlen auf einer Perlenkette. Sie werden in Zellen produziert, können in Tieren und Pflanzen gefunden werden und haben vielfältige Funktionen. Eine dieser Funktionen ist es, die umgebenen Zellen und Gewebe wie ein Gerüst zu stützen. Kollagen (welches in Haut, Knorpel, Sehnen und Knochen zu finden ist) und Keratin (welches in Haaren und Nägeln vorkommt) gehören zu diesen Strukturproteinen. Jedoch wenn ein Gewebe beschädigt ist, beispielsweise als Folge eines Unfalls, kann sich das Grundgerüst aus diesen Strukturproteinen manchmal nicht mehr selbst regenerieren. Maßgefertigte synthetische Polypeptide, können dafür verwendet werden, die Heilung und Wiederherstellung des Gewebes zu Unterstützen. Diese Polypeptide werden mit einer Reihe an chemischen Reaktionen synthetisiert, welche hauptsächlich darauf abzielen Aminosäuren miteinander zu verknüpfen. Synthetische Polypeptide sind weniger Komplex als die von Zellen hergestellten, natürlichen Polypeptide (Proteine). Während in den natürlichen Polypeptiden die Aminosäuren in einer von der DNA definierten Reihenfolge, welche als Sequenz bezeichnet wird, angeordnet sind, sind sie in synthetischen Polypeptiden zumeist zufällig verteilt. Die Konsequenz daraus ist, dass synthetische Polypeptide nicht immer so Leistungsfähig sind wie natürliche Proteine und ein durchdachtes Design benötigen. Zwei Aminosäuren wurden in dieser Dissertation sorgfältig ausgewählt und verwendet um eine Serie an Polypeptiden mit unterschiedlicher Zusammensetzung und Länge zu synthetisieren. Ein neuer und vielseitiger Syntheseweg wurde ebenfalls entwickelt und der zugrundeliegende Mechanismus untersucht. Die Polypeptide wurden gründlich analysiert und neue Materialien wurden aus ihnen entwickelt. In Lösung gebracht formten diese Fasern, ähnlich denen von Kollagen, welche sich wiederum zu robusten Netzwerken anordneten. Aus diesen Netzwerken ließen sich Hydrogele herstellen, welche in der Lage waren große Mengen an Wasser aufzunehmen. Diese Hydrogele wiederum stellen vielversprechende Kandidaten für biomedizinische Anwendungen dar. KW - polymer KW - chemistry KW - biomaterial KW - polymerization KW - kinetics KW - polypeptide KW - colloid KW - gelation KW - hydrogel KW - organogel KW - secondary structure KW - physical KW - NCA KW - N-carboxyanhydride KW - Polymer KW - Chemie KW - Biomaterial KW - Polymerisation KW - Kinetik KW - Polypeptid KW - Kolloid KW - Gelieren KW - Hydrogel KW - Organogel KW - Sekundärstruktur KW - physikalisch KW - NCA KW - N-carboxyanhydrid Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396366 ER - TY - GEN A1 - Vacogne, Charlotte D. A1 - Brosnan, Sarah M. A1 - Masic, Admir A1 - Schlaad, Helmut T1 - Fibrillar gels via the self-assembly of poly(L-glutamate)-based statistical copolymers N2 - Polypeptides having secondary structures often undergo self-assembly which can extend over multiple length scales. Poly(γ-benzyl-L-glutamate) (PBLG), for example, folds into α-helices and forms physical organogels, whereas poly(L-glutamic acid) (PLGA at acidic pH) or poly(L-glutamate) (PLG at neutral/basic pH) do not form hydrogels. We explored the gelation of modified PBLG and investigated the deprotection of the carboxylic acid moieties in such gels to yield unique hydrogels. This was accomplished through photo-crosslinking gelation of poly(γ-benzyl-L-glutamate-co-allylglycine) statistical copolymers in toluene, tetrahydrofuran, and 1,4-dioxane. Unlike most polymer-based chemical gels, our gels were prepared from dilute solutions (<20 g L−1, i.e., <2% w/v) of low molar mass polymers. Despite such low concentrations and molar masses, our dioxane gels showed high mechanical stability and little shrinkage; remarkably, they also exhibited a porous fibrillar network. Deprotection of the carboxylic acid moieties in dioxane gels yielded pH responsive and highly absorbent PLGA/PLG-based hydrogels (swelling ratio of up to 87), while preserving the network structure, which is an unprecedented feature in the context of crosslinked PLGA gels. These outstanding properties are highly attractive for biomedical materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 301 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102289 SP - 5040 EP - 5052 ER - TY - GEN A1 - Vacogne, Charlotte D. A1 - Schlaad, Helmut T1 - Primary ammonium/tertiary amine-mediated controlled ring opening polymerisation of amino acid N-carboxyanhydrides N2 - Stable commercial primary ammonium chlorides were combined with tertiary amines to initiate the controlled ring opening polymerisation of amino acid N-carboxyanhydrides to yield polypeptides with defined end group structure, predetermined molar mass and narrow molar mass distribution. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 307 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102718 SP - 15645 EP - 15648 ER - TY - THES A1 - Valverde Serrano, Clara T1 - Self-assembly behavior in hydrophilic block copolymers T1 - Selbstorganisation von hydrophilen Blockcopolymeren N2 - Block copolymers are receiving increasing attention in the literature. Reports on amphiphilic block copolymers have now established the basis of their self-assembly behavior: aggregate sizes, morphologies and stability can be explained from the absolute and relative block lengths, the nature of the blocks, the architecture and also solvent selectiveness. In water, self-assembly of amphiphilic block copolymers is assumed to be driven by the hydrophobic. The motivation of this thesis is to study the influence on the self-assembly in water of A b B type block copolymers (with A hydrophilic) of the variation of the hydrophilicity of B from non-soluble (hydrophobic) to totally soluble (hydrophilic). Glucose-modified polybutadiene-block-poly(N-isopropylacrylamide) copolymers were prepared and their self-assembly behavior in water studied. The copolymers formed vesicles with an asymmetric membrane with a glycosylated exterior and poly(N-isopropylacrylamide) on the inside. Above the low critical solution temperature (LCST) of poly(N-isopropylacrylamide), the structure collapsed into micelles with a hydrophobic PNIPAM core and glycosylated exterior. This collapse was found to be reversible. As a result, the structures showed a temperature-dependent interaction with L-lectin proteins and were shown to be able to encapsulate organic molecules. Several families of double hydrophilic block copolymers (DHBC) were prepared. The blocks of these copolymers were biopolymers or polymer chimeras used in aqueous two-phase partition systems. Copolymers based on dextran and poly(ethylene glycol) blocks were able to form aggregates in water. Dex6500-b-PEG5500 copolymer spontaneously formed vesicles with PEG as the “less hydrophilic” barrier and dextran as the solubilizing block. The aggregates were found to be insensitive to the polymer's architecture and concentration (in the dilute range) and only mildly sensitive to temperature. Variation of the block length, yielded different morphologies. A longer PEG chain seemed to promote more curved aggregates following the inverse trend usually observed in amphiphilic block copolymers. A shorter dextran promoted vesicular structures as usually observed for the amphiphilic counterparts. The linking function was shown to have an influence of the morphology but not on the self-assembly capability in itself. The vesicles formed by dex6500-b-PEG5500 showed slow kinetics of clustering in the presence of Con A lectin. In addition both dex6500-b-PEG5500 and its crosslinked derivative were able to encapsulate fluorescent dyes. Two additional dextran-based copolymers were synthesized, dextran-b-poly(vinyl alcohol) and dextran-b-poly(vinyl pyrrolidone). The study of their self-assembly allowed to conclude that aqueous two-phase systems (ATPS) is a valid source of inspiration to conceive DHBCs capable of self-assembling. In the second part the principle was extended to polypeptide systems with the synthesis of a poly(N-hydroxyethylglutamine)-block-poly(ethylene glycol) copolymer. The copolymer that had been previously reported to have emulsifying properties was able to form vesicles by direct dissolution of the solid in water. Last, a series of thermoresponsive copolymers were prepared, dextran-b-PNIPAMm. These polymers formed aggregates below the LCST. Their structure could not be unambiguously elucidated but seemed to correspond to vesicles. Above the LCST, the collapse of the PNIPAM chains induced the formation of stable objects of several hundreds of nanometers in radius that evolved with increasing temperature. The cooling of these solution below LCST restored the initial aggregates. This self-assembly of DHBC outside any stimuli of pH, ionic strength, or temperature has only rarely been described in the literature. This work constituted the first formal attempt to frame the phenomenon. Two reasons were accounted for the self-assembly of such systems: incompatibility of the polymer pairs forming the two blocks (enthalpic) and a considerable solubility difference (enthalpic and entropic). The entropic contribution to the positive Gibbs free energy of mixing is believed to arise from the same loss of conformational entropy that is responsible for “the hydrophobic effect” but driven by a competition for water of the two blocks. In that sense this phenomenon should be described as the “hydrophilic effect”. N2 - Blockcopolymere erfahren ein stetig wachsendes Interesse, was an der steigenden Anzahl an Publikationen zu diesem Thema erkennbar ist. Zahlreiche Studien zu amphiphilen Blockcopolymeren haben dabei einige grundlegende Erkenntnisse über deren chemisches und physikalisches Verhalten, vor allem über die Selbstorganisation, hervorgebracht. So können die Größe, die verschiedenen Morphologien und auch die Stabilität der gebildeten Aggregate anhand der relativen und absoluten Blocklängen, die chemischen Struktur der Blöcke, der molekularen Architektur und der Eigenschaften des verwendeten Lösungsmittel erklärt werden. Im speziellen Fall des Wassers als Lösungsmittel bist die Selbstorganisation amphiphiler Blockcopolymere durch den hydrophoben Effekt bedingt. Dieser Arbeit liegt das Interesse an der Selbstorganisation in wässrigem Medium von Blockcopolymeren des Typs A-b-B mit A als hydrophilem Block und B als Block mit variierender Hydrophilie bzw. Hydrophpobie von unlöslich bis vollständig löslich zugrunde. Durch Variation dieser Eigenschaften von Block B soll dessen Einfluss auf das Selbstorganisationsverhalten untersucht werden. Dazu wurden mit Glucose modifizierte Polybutadien-block-Poly(N-Isopropylacrylamid)-Copolymere hergestellt und deren Selbstorganisation in Wasser untersucht. Die Copolymere bilden Vesikel mit einer asymmetrischen Membran, wobei im äußeren Bereich glycolysierte Gruppen und im inneren Bereich Poly(N-Isopropylacrylamid) (PNIPAM) vorliegen. Beim Überschreiten der low critical solution temperature (LCST) kollabiert die vesikuläre Struktur unter Bildung von Mizellen mit einem hydrophoben PNIPAM-Mizellinneren und nach außen gerichteten glycolysierten Blöcken. Diese strukturelle Umwandlung ist reversibel. Die Strukturen zeigten außerdem eine temperaturabhängige Wechselwirkung mit L-Lectin-Proteinen und die Möglichkeit zur Einkapselung organischer Moleküle konnte belegt werden. Des weiteren wurden verschiedene Gruppen von Blockcopolymeren mit zwei hydrophilen Blöcken synthetisiert (double hydrophilic block copolymers – DHBC). Die Blöcke dieser Systeme waren entweder Biopolymere oder Polymerchimäre, die in wässrigen Zwei-Phasen-Trennverfahren eingesetzt werden. Polymere, die auf Dextran- und Poly(ethylenglycol)-Blöcken basieren, zeigen Aggregatbildung in wässriger Phase. Dex6500-b-PEG5500 bildet spontan Vesikel mit PEG als „weniger hydrophilem“ Bestandteil und Dextran als löslichem Block. Die Bildung dieser Vesikel zeigte keine Emfpindlichkeit gegenüber einer Veränderung der Polymerarchitektur und der Konzentration, und nur eine geringe Sensitivität gegenüber Temperaturänderungen. Veränderungen der Blocklängen dagegen beeinflussten die Selbstorganisation und führten zu unterschiedlichen Morphologien. Längere PEG-Blöcke bevorzugten dabei die Bildung eher gekrümmter Aggregate, entgegen dem Trend, der gewöhnlicherweise für amphiphile Blockcopolymere beobachtet wird. Die Verkürzung des Dextran-Blocks fördert die Ausbildung vesikulärer Strukturen, was dem Verhalten der amphiphilen Gegenspieler der DHBC-Systeme entspricht. Die funktionelle Gruppe zur Verbindung der beiden Blöcke hat zwar einen Einfluss auf die Morphologie der gebildeten Aggregate, nicht jedoch auf die eigentliche Fähigkeit der Systeme zur Selbstorganisation. Die Dex6500-b-PEG5500-Vesikel wiesen zudem eine langsame Bildungskinetik in Gegenwart von Con-A-Lectin auf. Des Weiteren waren sowohl Dex6500-b-PEG5500 als auch das quervernetzte Derivate dieses Copolymers in der Lage, Fluoreszenzfarbstoffe einzulagern. Um zu zeigen, dass wässrige Zwei-Phasen-Systeme (aqueous two phase systems – ATPS) eine belastbare Grundlage für die Untersuchung und Entwicklung selbstorganisierender DHBC-Systeme sind, wurden weitere Dextran-basierte Copolymere synthetsisiert: Dextran-b-Poly(vinylalokohol) und Detran-b-Poly(vinylpyrrolidon). In einem zweiten Teil dieser Arbeit wurde das zuvor erarbeitete Prinzip auf auf Polypeptidsysteme ausgeweitet. Dazu wurde ein Poly(N-Hydroxyethylglutamin)-block-Poly(ethylenglycol)-Copolymer hergestellt. Dieses Copolymer, dessen emulgierenden Eigenschaften bereits bekannt waren, wies unmittelbar nach Lösung des Feststoffes in Wasser Vesikelbildung auf. In einem dritten Teil der Studie wurden thermoresponsive Copolymere hergestellt und untersucht: Dextran-b-PNIPAMm. Unterhalb der LCST konnte die Bildung von Aggregaten nachgewiesen werden, deren Struktur nicht zweifelsfrei entschlüsselt werden konnte, wobei jedoch zahlreiche Hinweise auf eine vesikuläre Struktur hindeuten. Oberhalb der LCST wurde durch die Kollabierung der PNIPAM-Ketten die Bildung stabiler Strukturen mit Radien von mehreren hundert Nanometern induziert, deren weitere Entwicklung durch eine weitere Temperaturerhöhung gefördert werden konnte. Durch Rückkühlung in den Temperaturebereich unterhalb der LCST konnten die zuvor beobachteten Aggregate reversibel zurückgebildet werden. Das Selbstorganisationsverhalten von DHBC, unabhängig vom Einfluss des pH-Werts, der Ionenstärke oder der Temperatur are bisher nur in sehr geringem Umfang Gegenstand wissenschaftlicher Veröffentlichungen. Diese Arbeit stellt damit den ersten umfassenden Beitrag zur systematischen Erarbeitung dieses Phänomens dar. Es konnten dabei zwei Ursachen für die beobachteten Selbstorganisationseffekte bestimmt werden: die Inkompatibilität der beiden Polymerblöcke (enthalpischer Effekt) und der Unterschied in deren Löslichkeit (enthalpische und entropische Effekte). Der entropische Beitrag zur positiven Gibbs’schen Freien Mischungsenergie wird dem selben Verlust konformativer Entropie zugeordnet, der auch für den hydrophoben Effekt verantwortlich ist, allerdings angetrieben durch einen Wettbewerb der beiden Polymerblöcke um das Wasser. In diesem Sinne kann man das beobachtete Phänomen als „hydrophilen Effekt“ bezeichnen. KW - Selbstorganisation KW - Blockcopolymere KW - hydrophil KW - self-assembly KW - copolymers KW - hydrophilic Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-54163 ER - TY - THES A1 - Vazhappilly, Tijo Joseph T1 - Vibrationally enhanced associative photodesorption of H2 (D2) from Ru(0001) : quantum and classical approaches T1 - Vibrationsgesteigerte assoziative Photodesorptionvon H2 (D2 ) von Ru(0001) : Quantendynamische und klassiche Simulationen N2 - Nowadays, reactions on surfaces are attaining great scientific interest because of their diverse applications. Some well known examples are production of ammonia on metal surfaces for fertilizers and reduction of poisonous gases from automobiles using catalytic converters. More recently, also photoinduced reactions at surfaces, useful, \textit{e.g.}, for photocatalysis, were studied in detail. Often, very short laser pulses are used for this purpose. Some of these reactions are occurring on femtosecond (1 fs=$10^{-15}$ s) time scales since the motion of atoms (which leads to bond breaking and new bond formation) belongs to this time range. This thesis investigates the femtosecond laser induced associative photodesorption of hydrogen, H$_2$, and deuterium, D$_2$, from a ruthenium metal surface. Many interesting features of this reaction were explored by experimentalists: (i) a huge isotope effect in the desorption probability of H$_2$ and D$_2$, (ii) the desorption yield increases non-linearly with the applied visible (vis) laser fluence, and (iii) unequal energy partitioning to different degrees of freedom. These peculiarities are due to the fact that an ultrashort vis pulse creates hot electrons in the metal. These hot electrons then transfer energy to adsorbate vibrations which leads to desorption. In fact, adsorbate vibrations are strongly coupled to metal electrons, \textit{i.e.}, through non-adiabatic couplings. This means that, surfaces introduce additional channels for energy exchange which makes the control of surface reactions more difficult than the control of reactions in the gas phase. In fact, the quantum yield of surface photochemical reactions is often notoriously small. One of the goals of the present thesis is to suggest, on the basis of theoretical simulations, strategies to control/enhance the photodesorption yield of H$_2$ and D$_2$ from Ru(0001). For this purpose, we suggest a \textit{hybrid scheme} to control the reaction, where the adsorbate vibrations are initially excited by an infrared (IR) pulse, prior to the vis pulse. Both \textit{adiabatic} and \textit{non-adiabatic} representations for photoinduced desorption problems are employed here. The \textit{adiabatic} representation is realized within the classical picture using Molecular Dynamics (MD) with electronic frictions. In a quantum mechanical description, \textit{non-adiabatic} representations are employed within open-system density matrix theory. The time evolution of the desorption process is studied using a two-mode reduced dimensionality model with one vibrational coordinate and one translational coordinate of the adsorbate. The ground and excited electronic state potentials, and dipole function for the IR excitation are taken from first principles. The IR driven vibrational excitation of adsorbate modes with moderate efficiency is achieved by (modified) $\pi$-pulses or/and optimal control theory. The fluence dependence of the desorption reaction is computed by including the electronic temperature of the metal calculated from the two-temperature model. Here, our theoretical results show a good agreement with experimental and previous theoretical findings. We then employed the IR+vis strategy in both models. Here, we found that vibrational excitation indeed promotes the desorption of hydrogen and deuterium. To summarize, we conclude that photocontrol of this surface reaction can be achieved by our IR+vis scheme. N2 - Heutzutage werden Reaktionen auf Oberflächen wegen ihrer vielfältigen Anwendungen intensiv untersucht. Einige der bekannten Beispiele sind die Herstellung von Ammoniak auf Metalloberflächen für die Kunstdüngerproduktion und die Reduktion giftiger Abgase in Autokatalysatoren. In letzter Zeit wurden auch photoinduzierte Reaktionen an Oberflächen eingehender untersucht, die z.B. für die Photokatalyse verwandt werden können. Häufig werden in diesen Untersuchungen sehr kurze Laserpulse benutzt. Einige der Reaktionen finden auf einer Femtosekunden-Zeitskala \mbox{(1 fs =10$^{-15}$ s)} statt, da die Bewegungen einzelner Atome in derart kurzen Zeitspannen ablaufen (durch die der Bindungsbruch und das Knüpfen neuer Bindungen verursacht wird). Diese Arbeit untersucht die femtosekunden-laserinduzierte assoziative Photodesorption von Wasserstoff, H$_2$, und Deuterium, D$_2$, von einer Rutheniumoberfläche. Viele interessante Eigenschaften dieser Reaktion wurden in Experimenten entdeckt: (i) ein großer Isotopeneffekt in der Desorptionswahrscheinlichkeit von H$_2$ und D$_2$, (ii) die Desorptionsausbeute steigt nicht-linear mit der (vis) Laserfluenz an und (iii) eine Nicht-Gleichverteilung der Energie auf die einzelnen Freiheitsgrade. Diese Auffälligkeiten sind durch den Umstand verursacht, dass der ultrakurze vis-Laserpuls heiße Elektronen im Metall erzeugt. Die heißen Elektronen transferieren dann Energie in die Schwingungen des Adsorbats, was zur Desorption führt. Tatsächlich sind die Adsorbatschwingungen stark an die Elektronen gekoppelt, nämlich durch nicht-adiabatische Kopplungen. Dies bedeutet, dass durch Oberflächen neue Kanäle für den Energietransfer geöffnet werden, was die Kontrolle von Oberflächenreaktionen im Vergleich zu solchen in der Gasphase erschwert. In der Tat sind die Quantenausbeuten von photochemischen Oberflächenreaktionen bekannterweise klein. Eines der Ziele in der vorliegenden Arbeit ist es auf der Basis von theoretischen Simulationen Strategien vorzuschlagen, um die Photodesorptionsausbeute von H$_2$ und D$_2$ von Ru(0001) zu kontrollieren bzw. zu verbessern. Zu diesem Zweck schlagen wir ein gemischtes Kontrollschema für die Reaktion vor, bei dem zunächst die Adsorbatschwingungen vor dem vis-Puls durch einen infraroten (IR) Puls angeregt werden. Sowohl adiabatische als auch nicht-adiabatische Repräsentationen für photoinduzierte Desorptionsprozesse werden dabei benutzt. Die adiabatische Repräsentation ist in klassischen Molekulardynamik-Simulationen mit elektronischer Reibung verwirklicht. In einer quantenmechanischen Beschreibung werden nicht-adiabatische Repräsentationen innerhalb der Dichtematrixtheorie für offene Quantensysteme verwandt. Die zeitliche Entwicklung des Desorptionsprozesses wird in einem Zwei-Modenmodell reduzierter Dimensionalität mit einer Schwingungs- und einer Translationskoordinate des Adsorbats beschrieben. Die Potentiale für den elektronische Grundzustand und den angeregten Zustand sind abgeleitet aus quantenchemischen Rechnungen (\textsl{first principles}). Die IR-getriebene Schwingungsanregung der Adsorbatmoden mit moderatem Wirkungsgrad wird mit (modifizierten) $\pi$-Pulsen und/oder der Theorie der optimalen Kontrolle erreicht. Die Abhängigkeit der Desorption von der Fluenz wird mit Hilfe der elektronischen Temperatur des Metalls berechnet, welche im Rahmen des Zwei-Temperatur-Modells bestimmt wird. Dabei weisen unsere Ergebnisse eine gute Übereinstimmung mit experimentellen und früheren theoretischen Arbeiten auf. Daraufhin wandten wir die IR+vis Strategie in beiden Modellen an. Dadurch konnten wir zeigen, dass Schwingungsanregung in der Tat die Desorption von Wasserstoff und Deuterium begünstigt. Zusammenfassend stellen wir fest, dass die Photokontrolle dieser Oberflächenreaktion durch unser IR+vis Schema erreichbar ist. KW - Quantendynamische Simulationen KW - Klassiche Simulationen KW - assoziative Photodesorption KW - Schwingungsanregung KW - Photodesorption KW - quantum dynamics KW - classical dynamics KW - vibrational control KW - vibrational excitation Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19056 ER - TY - THES A1 - Vijayakrishnan, Balakumar T1 - Solution and solid phase synthesis of N,N'-diacetyl chitotetraoses T1 - Synthese von N,N'-Diacetylchitotetraosen in Lösung und an Fester Phase N2 - The three major biopolymers, proteins, nucleic acids and glycoconjugates are mainly responsible for the information transfer, which is a fundamental process of life. The biological importance of proteins and nucleic acids are well explored and oligosaccharides in the form of glycoconjugates have gained importance recently. The β-(1→4) linked N-acetylglucosamine (GlcNAc) moiety is a frequently occurring structural unit in various naturally and biologically important oligosaccharides and related conjugates. Chitin which is the most abundant polymer of GlcNAc is widely distributed in nature whereas the related polysaccharide chitosan (polymer of GlcN and GlcNAc) occurs in certain fungi. Chitooligosaccharides of mixed acetylation patterns are of interest for the determination of the substrate specificities and mechanism of chitinases. In this report, we describe the chemical synthesis of three chitotetraoses namely GlcNAc-GlcN-GlcNAc-GlcN, GlcN-GlcNAc-GlcNAc-GlcN and GlcN-GlcN-GlcNAc-GlcNAc. Benzyloxycarbonyl (Z) and p-nitrobenzyloxycarbonyl (PNZ) were used for the amino functionality due to their ability to form the β-linkage during the glycosylation reactions through neighboring group participation and the trichloroacetimidate approach was utilized for the donor. Monomeric, dimeric acceptors and donors have been prepared by utilizing the Z and PNZ groups and coupling between the appropriate donor and acceptors in the presence of Lewis acid yielded the protected tetrasaccharides. Finally cleavage of PNZ followed by reacetylation and the deblocking of other protecting groups afforded the N,N’-diacetyl chitotetraoses in good yield. Successful syntheses for the protected diacetyl chitotetraoses by solid phase synthesis have also been described. N2 - Die drei wichtigsten Biopolymere sind Proteine, Nukleinsäuren und Glykokonjugate. Sie sind von fundamentaler Bedeutung für lebenswichtige Prozesse, wie z.B. den Informationstransfer. Die biologische Bedeutung von Proteinen und Nukleinsäuren ist eingehend erforscht, während Oligosaccharide in Form von Glykokonjugaten erst in neuerer Zeit an Bedeutung gewonnen haben. Die β-(1→4) verknüpfte N-Acetylglucosamin (GlcNAc) Einheit kommt häufig als in vielen natürlichen und biologisch wichtigen Oligosacchariden und ihren Konjugaten vor. Chitin, ein Polymer von GlcNAc, ist in der Natur weit verbreitet, während das verwandte Polysaccharid Chitosan (Polymer of GlcN und GlcNAc) in gewissen Pilzen auftritt. Chitooligosaccharide gemischter Acetylierungsmuster sind von Bedeutung für die Bestimmung von Substratwirkungen und für den Mechanismus von Chitinasen. In dieser Arbeit beschreiben wir die chemische Synthese von drei Chitotetraosen, nämlich GlcNAc-GlcN-GlcNAc-GlcN, GlcN-GlcNAc-GlcNAc-GlcN and GlcN-GlcN-GlcNAc-GlcNAc. Benzyloxycarbonyl (Z) und p-Nitrobenzyloxycarbonyl (PNZ) wurden aufgrund ihrer Fähigkeit, die β-Verknüpfung während der Glykosylierung durch die Nachbargruppenbeteiligung zu steuern, als Aminoschutzgruppen verwendet. Zur Aktivierung der Donoren wurde die Trichloracetamidat Methode angewendet. Monomere und dimere Akzeptoren und Donoren wurden unter Verwendung von Z und PNZ Gruppen hergestellt. Die Kupplung von geeigneten Donoren und Akzeptoren in Gegenwart einer Lewis Säure ergaben die Tetrasaccharide. Schließlich ergab die Entschützung von PNZ, gefolgt von der Reacetylierung der Aminogruppe und Abspalten der übrigen Schutzgruppen die N,N’-Diacetylchitotetraosen in guten Ausbeuten. Weiterhin wird die erfolgreiche Synthese der geschützten Diacetylchitotetraosen durch Festphasensynthese beschrieben. KW - Chitooligosaccharide KW - Chemische Synthese KW - Festphasensynthese KW - Glykosylierung KW - Chitooligosaccharides KW - Chemical Synthesis KW - Solution phase synthesis KW - Solid phase synthesis KW - Glycosylation Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-18830 ER - TY - THES A1 - Villatoro Leal, José Andrés T1 - A combined approach for the analysis of biomolecules using IR-MALDI ion mobility spectrometry and molecular dynamics simulations of peptide ions in the gas phase T1 - Kombinierter Einsatz von IR-MALDI Ionenmobilitätsspektrometrie und Simulationen der Molekulardynamik von Peptidionen in der Gasphase zur Analyse von Biomolekülen N2 - The aim of this doctoral thesis was to establish a technique for the analysis of biomolecules with infrared matrix-assisted laser dispersion (IR-MALDI) ion mobility (IM) spectrometry. The main components of the work were the characterization of the IR-MALDI process, the development and characterization of different ion mobility spectrometers, the use of IR-MALDI-IM spectrometry as a robust, standalone spectrometer and the development of a collision cross-section estimation approach for peptides based on molecular dynamics and thermodynamic reweighting. First, the IR-MALDI source was studied with atmospheric pressure ion mobility spectrometry and shadowgraphy. It consisted of a metal capillary, at the tip of which a self-renewing droplet of analyte solution was met by an IR laser beam. A relationship between peak shape, ion desolvation, diffusion and extraction pulse delay time (pulse delay) was established. First order desolvation kinetics were observed and related to peak broadening by diffusion, both influenced by the pulse delay. The transport mechanisms in IR-MALDI were then studied by relating different laser impact positions on the droplet surface to the corresponding ion mobility spectra. Two different transport mechanisms were determined: phase explosion due to the laser pulse and electrical transport due to delayed ion extraction. The velocity of the ions stemming from the phase explosion was then measured by ion mobility and shadowgraphy at different time scales and distances from the source capillary, showing an initially very high but rapidly decaying velocity. Finally, the anatomy of the dispersion plume was observed in detail with shadowgraphy and general conclusions over the process were drawn. Understanding the IR-MALDI process enabled the optimization of the different IM spectrometers at atmospheric and reduced pressure (AP and RP, respectively). At reduced pressure, both an AP and an RP IR-MALDI source were used. The influence of the pulsed ion extraction parameters (pulse delay, width and amplitude) on peak shape, resolution and area was systematically studied in both AP and RP IM spectrometers and discussed in the context of the IR-MALDI process. Under RP conditions, the influence of the closing field and of the pressure was also examined for both AP and RP sources. For the AP ionization RP IM spectrometer, the influence of the inlet field (IF) in the source region was also examined. All of these studies led to the determination of the optimal analytical parameters as well as to a better understanding of the initial ion cloud anatomy. The analytical performance of the spectrometer was then studied. Limits of detection (LOD) and linear ranges were determined under static and pulsed ion injection conditions and interpreted in the context of the IR-MALDI mechanism. Applications in the separation of simple mixtures were also illustrated, demonstrating good isomer separation capabilities and the advantages of singly charged peaks. The possibility to couple high performance liquid chromatography (HPLC) to IR-MALDI-IM spectrometry was also demonstrated. Finally, the reduced pressure spectrometer was used to study the effect of high reduced field strength on the mobility of polyatomic ions in polyatomic gases. The last focus point was on the study of peptide ions. A dataset obtained with electrospray IM spectrometry was characterized and used for the calibration of a collision cross-section (CCS) determination method based on molecular dynamics (MD) simulations at high temperature. Instead of producing candidate structures which are evaluated one by one, this semi-automated method uses the simulation as a whole to determine a single average collision cross-section value by reweighting the CCS of a few representative structures. The method was compared to the intrinsic size parameter (ISP) method and to experimental results. Additional MD data obtained from the simulations was also used to further analyze the peptides and understand the experimental results, an advantage with regard to the ISP method. Finally, the CCS of peptide ions analyzed by IR-MALDI were also evaluated with both ISP and MD methods and the results compared to experiment, resulting in a first validation of the MD method. Thus, this thesis brings together the soft ionization technique that is IR-MALDI, which produces mostly singly charged peaks, with ion mobility spectrometry, which can distinguish between isomers, and a collision cross-section determination method which also provides structural information on the analyte at hand. N2 - Das Ziel dieser Arbeit war die Zusammenführung der schonende Ionisationsquelle Infrared Matrix-Assisted Laser Dispersion Ionization (IR-MALDI), der Isomer-diskriminierende Ionenmobilitätsspektrometrie und einer neuartigen, auf Molecular Dynamics (MD) Simulationen basierte Berechnungsmethode für Stoßquerschnitte. Der erste Schritt war die Charakterisierung des Flüssigkeitsdispersionsphänomens in IR-MALDI: Zwei verschiedenen Ionentransportmechanismen wurden nachgewiesen und weiter studiert. Die Beziehung zwischen Peakform, Diffusion, Desolvatation und Ionen Extraktionspuls wurde beschrieben. Die Geschwindigkeit der Ionen, die aus dem Dispersionsphänomen stammen, wurde durch Ionenmobilitätsspektrometrie und Shadowgraphie untersucht. Shadowgraphie hat ebenfalls das Verhalten des Dispersionsphänomens erläutert. Eine hohe, schnell abklingende initielle Geschwindigkeit wurde beobachtet. Das Verständnis des IR-MALDI Verfahrens ermöglichte die Optimierung der verschiedenen Ionenmobilität (IM) Spektrometer zum analytischen Zweck. Eine Atmosphärendruck- und zwei Niederdruckvariante von IM Spektrometern wurden mit gepulster Ionenextraktion genutzt. Die Pulsparameter (Pulsverzögerung, ‑breite, -höhe) und verschiedene elektrische Felder an unterschiedlichen Stellen der Spektrometer wurden systematisch variiert. Deren Einfluss auf die Peakauflösung und -fläche wurde untersucht und im Rahmen des IR-MALDI Verfahrens erklärt. Das Verständnis der Anatomie der Anfangsionenwolke wurde ebenfalls durch diese Experimente vertieft. Die analytische Leistungsfähigkeit eines IM-Spektrometers wurde dann untersucht. Nachweisgrenzen und lineare Bereiche wurden bestimmt und in Zusammenhang mit dem IR-MALDI Verfahren interpretiert. Anhand der Trennung von Isomeren und einfachen Mischungen wurde die Anwendung dieser Technik demonstriert und ihre Vorteile, die Detektion einfachgeladener Ionen und die Möglichkeit der HPLC-Kopplung (High Performance Liquid Chromatography), aufgezeigt. Mit dem Niederdruckspektrometer wurde der Einfluss hoher reduzierter Feldstärken auf die Ionenmobilität von polyatomische Ionen in polyatomische Gasen untersucht. Der letzte Schwerpunkt war die Charakterisierung von Peptidionen. Die Peptiden wurden mit Elektrospray (ESI) IM-Spektrometrie vermessen. Der hieraus erhaltene Datensatz diente zur Etablierung einer Stoßquerschnitt Berechnungsmethode mittels MD. Anstatt verschiedener Kandidat-Strukturen und deren Stoßquerschnitte, ergibt diese neuartige semi-automatisierte Methode einen einzigen, gemittelten Stoßquerschnitt. Die MD Methode wurde dann mit einer anderen, einfacheren Methode und mit den experimentellen Ergebnissen von ESI und IR-MALDI-IM Spektrometrie verglichen. Zudem wurde der Zusammenhang zwischen Ladungszustands- und Stoßquerschnittsdifferenzen zwischen den Peptiden untersucht. Weitere Strukturelle Informationen konnten aus den Simulationen extrahiert, und zur Charakterisierung der Peptiden verwendet werden. KW - Ion mobility spectrometry KW - Molecular dynamics KW - IR-MALDI KW - Peptides KW - Shadowgraphy KW - Liquid dispersion KW - Ionenmobilitätsspektrometrie KW - Molekulardynamik KW - Collision cross-section KW - IR-MALDI KW - Peptiden KW - Shadowgraphie KW - Stoßquerschnitt KW - Flüssigkeitszerstäubung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419723 ER - TY - GEN A1 - Vioux, André A1 - Taubert, Andreas T1 - Ionic liquids 2014 and selected papers from ILMAT 2013 BT - Highlighting the ever-growing potential of Ionic Liquids T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1055 KW - electrolytes KW - extraction KW - system Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-475062 SN - 1866-8372 IS - 1055 ER - TY - THES A1 - Vogel, Stefanie T1 - Sequence dependency of photon and electron induced DNA strand breaks T1 - Sequenzabhängigkeit von photonen-und elektroneninduzierten DNA Strangbrüchen N2 - Deoxyribonucleic acid (DNA) is the carrier of human genetic information and is exposed to environmental influences such as the ultraviolet (UV) fraction of sunlight every day. The photostability of the DNA against UV light is astonishing. Even if the DNA bases have a strong absorption maximum at around 260 nm/4.77 eV, their quantum yield of photoproducts remains very low 1. If the photon energies exceed the ionization energy (IE) of the nucleobases ( ̴ 8-9 eV) 2, the DNA can be severely damaged. Photoexcitation and -ionization reactions occur, which can induce strand breaks in the DNA. The efficiency of the excitation and ionization induced strand breaks in the target DNA sequences are represented by cross sections. If Si as a substrate material is used in the VUV irradiation experiments, secondary electrons with an energy below 3.6 eV are generated from the substrate. This low energy electrons (LEE) are known to induce dissociative electron attachment (DEA) in DNA and with it DNA strand breakage very efficiently. LEEs play an important role in cancer radiation therapy, since they are generated secondarily along the radiation track of ionizing radiation. In the framework of this thesis, different single stranded DNA sequences were irradiated with 8.44 eV vacuum UV (VUV) light and cross sections for single strand breaks (SSB) were determined. Several sequences were also exposed to secondary LEEs, which additionally contributed to the SSBs. First, the cross sections for SSBs depending on the type of nucleobases were determined. Both types of DNA sequences, mono-nucleobase and mixed sequences showed very similar results upon VUV radiation. The additional influence of secondarily generated LEEs resulted in contrast in a clear trend for the SSB cross sections. In this, the polythymine sequence had the highest cross section for SSBs, which can be explained by strong anionic resonances in this energy range. Furthermore, SSB cross sections were determined as a function of sequence length. This resulted in an increase in the strand breaks to the same extent as the increase in the geometrical cross section. The longest DNA sequence (20 nucleotides) investigated in this series, however, showed smaller cross section values for SSBs, which can be explained by conformational changes in the DNA. Moreover, several DNA sequences that included the radiosensitizers 5-Bromouracil (5BrU) and 8-Bromoadenine (8BrA) were investigated and the corresponding SSB cross sections were determined. It was shown that 5BrU reacts very strongly to VUV radiation leading to high strand break yields, which showed in turn a strong sequence-dependency. 8BrA, on the other hand, showed no sensitization to the applied VUV radiation, since almost no increase in strand breakage yield was observed in comparison to non-modified DNA sequences. In order to be able to identify the mechanisms of radiation damage by photons, the IEs of certain DNA sequences were further explored using photoionization tandem mass spectrometry. By varying the DNA sequence, both the IEs depending on the type of nucleobase as well as on the DNA strand length could be identified and correlated to the SSB cross sections. The influence of the IE on the photoinduced reaction in the brominated DNA sequences could be excluded. N2 - Desoxyribonukleinsäure (DNA) ist als Träger der menschlichen Erbinformation täglich vielen Einflüssen ausgesetzt. Diese Einflüsse können Teil unserer Umwelt sein, wie der ultraviolette (UV) Anteil des Sonnenlichts. Die Photostabilität der DNA gegen UV-Licht ist erstaunlich, denn trotz eines starkes Absorptionsmaximum der DNA-Basen bei etwa 260 nm/4,77 eV, bleibt ihre Quantenausbeute an Photoprodukten sehr gering 1. Überschreiten die Photonenenergien die Ionisationsenergie (IE) der Nukleinbasen ( ̴ 8-9 eV) 2, kann die DNA schwer geschädigt werden. Es treten Anregungs- und Ionisierungsreaktionen auf, die zu Strangbrüchen in der DNA führen. Die Effizienz der induzierten Strangbrüche in den untersuchten DNA-Sequenzen wird durch Wirkungsquerschnitte dargestellt. Wird in den Bestrahlungsexperimenten Silizium als Substratmaterial verwendet, werden aus dem Substrat zusätzliche Sekundärelektronen mit einer Energie unter 3,6 eV erzeugt, die weiteren Schaden an der DNA verursachen. Diese niederenergetischen Elektronen (LEE) sind dafür bekannt, dissoziative Elektronenanlagerung (DEA) und damit Strangbrüche in der DNA zu erzeugen. LEEs entstehen sekundär entlang des Strahlungsweges von ionisierender Strahlung im biologischen Gewebe, wenn in der Behandlung der Krankheit Krebs Strahlentherapie eingesetzt wird. Im Rahmen dieser Arbeit wurden verschiedene Einzelstrang-DNA-Sequenzen mit 8.44 eV Vakuum-UV (VUV) Licht bestrahlt und Wirkungsquerschnitte für Einzel-strangbrüche (SSB) bestimmt. Ein Teil der Sequenzen wurde außerdem sekundär erzeugten LEEs ausgesetzt, die einen zusätzlichen Beitrag zu den SSBs liefern. Als erstes wurde der Wirkungsquerschnitt für SSBs in Abhängigkeit der Nukleinbasen bestimmt. Hierbei weisen sowohl die DNA Sequenzen, die nur ein Sorte an Nukleinbasen besitzen als auch die gemischte Sequenzen sehr ähnliche Werte auf. Durch den zusätzlichen Einfluss der LEEs hat sich wiederum für die DNA Sequenzen mit nur einer Sorte an Nukleinbasen ein stark ausgeprägter Trend gezeigt. Die Polythymin-Sequenz weist den höchsten Wirkungsquerschnitt für SSBs auf, was durch ausgeprägte anionische Resonanzen in diesem Energiebereich begründet werden kann. Des Weiteren wurden Wirkungsquerschnitte für SSBs in Abhängigkeit Sequenzlänge ermittelt. Dabei ergab sich eine Erhöhung der SSBs im gleichen Maße wie die Vergrößerung des geometrischen Wirkungsquerschnitts. Die längste DNA Sequenz (20 Nukleotide), die in dieser Reihe untersucht wurde, zeigte hingegen kleinere Werte für den SSB Wirkungsquerschnitt, was durch Konformationsänderungen in der DNA erklärt werden kann. Einige der untersuchten DNA Sequenzen wurden zusätzlich mit den Radiosensibilisatoren 5-Bromouracil (5BrU) und 8-Bromoadenine (8BrA) modifiziert und entsprechende SSB Wirkungsquerschnitte bestimmt. Hierbei hat sich gezeigt, dass 5BrU mittels einer hohen Strangbruchausbeute sehr stark auf VUV Strahlung reagiert, wobei das Ausmaß der Reaktion stark sequenzabhängig ist. 8BrA hingegen, weist keine Sensibilisierung gegenüber der verwendeten VUV Strahlung auf, da keine Erhöhung der Strangbruchausbeute gegenüber unmodifizierten DNA Sequenzen ersichtlich ist. Um die Mechanismen der Strahlenschädigung durch Photonen besser einschätzen zu können, wurden zusätzlich die IEs bestimmter DNA Sequenzen mit Hilfe der Photoionisations-Tandem-Massenspektrometrie untersucht. Durch Variation der DNA-Sequenzen konnte sowohl ein Trend der IEs in Abhängigkeit der Nukleinbasen und der DNA-Stranglänge identifiziert und als auch eine Abhängigkeit der Reaktivität von 5BrU von seinem IE in der entsprechenden DNA Sequenz ausgeschlossen werden. Die IE Trends und die Wirkungsquerschnitte für SSBs wurden abschließend in Korrelation gebracht. KW - DNA KW - photo ionization KW - dissociative electron attachment KW - DNA origami KW - radiosensitizer KW - ionization energy KW - tandem mass spectrometry KW - DNS KW - Photoionisation KW - Dissoziative Elektronenanlagerung KW - DNA Origami KW - Radiosensibilisator KW - Ionisierungsenergie KW - Tandemmassenspektrometrie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419669 ER - TY - THES A1 - Voß, Rebecca T1 - Mesoporous organosilica materials with amine functions : surface characteristics and chirality T1 - Mesoporöse Amin-funktionalisierte Organo-Silik ate : Oberflächen Eigenschaften und Chiralität N2 - In this work mesoporous organisilica materials are synthesized through the silica sol-gel process. For this a new class of precursors which are also surfactant are synthesized and self-assembled. This leads to a high surface area functionality which is analysized with copper (II) and water adsorption. N2 - Im Rahmen dieser Arbeit werden mesoporöse Amin-funktionalisierte Organo-Silikate durch den Silika Sol-Gel Prozess hergestellt. Dabei werden neue Alkoxysilyl-Precursoren synthetisiert und condensiert die die gewünschte Funktion auf die Oberfläche dirigieren. Herstellt werden primäre, secundäre und chirale Amine. Die Oberflächenfunktionalität wird mit Kupfer (II) und Wasser Adsorption analysiert. T2 - Mesoporous organosilica materials with amine functions : surface characteristics and chirality KW - Silicate KW - Chiralität KW - Adsorption KW - Poröser Stoff KW - Hydroborierung KW - Amine KW - Mesoporöse Materialien KW - Organo-Silikate KW - mesoporous materials KW - organosilica Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5287 ER -