TY - BOOK A1 - Laloë, Franck T1 - Grundlagen kontinuierlicher Symmetrien BT - von der Raumzeit zur Quantenmechanik N2 - Das neue Buch von Franck Laloë stellt einen symmetriebasierten Ansatz vor, um die Quantenmechanik auf einer fundamentalen Ebene zu verstehen, und liefert die dazugehörigen Rechentechniken, um fortgeschrittene Kurse über Kernphysik, Quantenoptik und Festkörperphysik zu meistern. Y1 - 2024 SN - 978-3-527-41415-4 SN - 978-3-527-83999-5 SN - 978-3-527-83998-8 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Schröder, Jakob T1 - Fundamentals of diffraction-based residual stress and texture analysis of laser powder bed fused Inconel 718 T1 - Grundlagen der beugungsbasierten Eigenspannungs- und Texturanalyse von laserstrahlgeschmolzenem Inconel 718 N2 - Additive manufacturing (AM) processes enable the production of metal structures with exceptional design freedom, of which laser powder bed fusion (PBF-LB) is one of the most common. In this process, a laser melts a bed of loose feedstock powder particles layer-by-layer to build a structure with the desired geometry. During fabrication, the repeated melting and rapid, directional solidification create large temperature gradients that generate large thermal stress. This thermal stress can itself lead to cracking or delamination during fabrication. More often, large residual stresses remain in the final part as a footprint of the thermal stress. This residual stress can cause premature distortion or even failure of the part in service. Hence, knowledge of the residual stress field is critical for both process optimization and structural integrity. Diffraction-based techniques allow the non-destructive characterization of the residual stress fields. However, such methods require a good knowledge of the material of interest, as certain assumptions must be made to accurately determine residual stress. First, the measured lattice plane spacings must be converted to lattice strains with the knowledge of a strain-free material state. Second, the measured lattice strains must be related to the macroscopic stress using Hooke's law, which requires knowledge of the stiffness of the material. Since most crystal structures exhibit anisotropic material behavior, the elastic behavior is specific to each lattice plane of the single crystal. Thus, the use of individual lattice planes in monochromatic diffraction residual stress analysis requires knowledge of the lattice plane-specific elastic properties. In addition, knowledge of the microstructure of the material is required for a reliable assessment of residual stress. This work presents a toolbox for reliable diffraction-based residual stress analysis. This is presented for a nickel-based superalloy produced by PBF-LB. First, this work reviews the existing literature in the field of residual stress analysis of laser-based AM using diffraction-based techniques. Second, the elastic and plastic anisotropy of the nickel-based superalloy Inconel 718 produced by PBF-LB is studied using in situ energy dispersive synchrotron X-ray and neutron diffraction techniques. These experiments are complemented by ex situ material characterization techniques. These methods establish the relationship between the microstructure and texture of the material and its elastic and plastic anisotropy. Finally, surface, sub-surface, and bulk residual stress are determined using a texture-based approach. Uncertainties of different methods for obtaining stress-free reference values are discussed. The tensile behavior in the as-built condition is shown to be controlled by texture and cellular sub-grain structure, while in the heat-treated condition the precipitation of strengthening phases and grain morphology dictate the behavior. In fact, the results of this thesis show that the diffraction elastic constants depend on the underlying microstructure, including texture and grain morphology. For columnar microstructures in both as-built and heat-treated conditions, the diffraction elastic constants are best described by the Reuss iso-stress model. Furthermore, the low accumulation of intergranular strains during deformation demonstrates the robustness of using the 311 reflection for the diffraction-based residual stress analysis with columnar textured microstructures. The differences between texture-based and quasi-isotropic approaches for the residual stress analysis are shown to be insignificant in the observed case. However, the analysis of the sub-surface residual stress distributions show, that different scanning strategies result in a change in the orientation of the residual stress tensor. Furthermore, the location of the critical sub-surface tensile residual stress is related to the surface roughness and the microstructure. Finally, recommendations are given for the diffraction-based determination and evaluation of residual stress in textured additively manufactured alloys. N2 - Additive Fertigungsverfahren (AM) ermöglichen die Herstellung von Metallstrukturen mit außergewöhnlicher Gestaltungsfreiheit, wobei das pulverbettbasierte Laserstrahlschmelzen (PBF-LB) eines der gängigsten dieser Verfahren darstellt. In diesem Verfahren schmilzt ein Laser ein Pulverbett schichtweise auf, um ein Bauteil mit der gewünschten Geometrie zu erzeugen. Während der Fertigung kommt es aufgrund des wiederholten Aufschmelzens und der schnellen, gerichteten Erstarrung zu hohen Temperaturgradienten, die hohe thermische Spannungen erzeugen. Einerseits können diese thermischen Spannungen während des Fertigungsprozesses zur Rissbildung oder zur Ablösung des Bauteils führen. Häufiger jedoch verbleiben große Eigenspannungen im gefertigten Bauteil als Folge der thermischen Spannungen. Diese Eigenspannungen begünstigen die Verzerrung der Bauteile und können sogar ihr vorzeitiges Versagen im Betrieb verursachen. Daher ist die Kenntnis der Eigenspannungsverteilung im Bauteil sowohl für die Prozessoptimierung als auch die strukturelle Integrität bedeutend. Beugungsbasierte Verfahren ermöglichen die zerstörungsfreie Bestimmung des Eigenspannungsfeldes. Diese Verfahren erfordern jedoch eine vorhergehende Kenntnis der Materialeigenschaften, da gewisse Annahmen getroffen werden müssen, um die Eigenspannungen genau bestimmen zu können. Zunächst müssen aus den gemessenen Abständen der Gitterebenen Gitterdehnungen berechnet werden, wozu der dehnungsfreie Referenzzustand bekannt sein muss. Weiterhin müssen die Gitterdehnungen über das Hookesche Gesetz, unter Bezugnahme der elastischen Eigenschaften, in Spannungen überführt werden. Da die meisten Kristallstrukturen durch ein anisotropes Verhalten gekennzeichnet sind, ist ihr elastisches Verhalten für jede Gitterebene spezifisch. Deshalb bedarf es bei der Nutzung monochromatischer Strahlung zur beugungsbasierten Eigenspannungsbestimmung der Kenntnis der gitterebenenspezifischen elastischen Eigenschaften. Zusätzlich ist das Wissen über die Mikrostruktur des Materials unabdingbar für eine zuverlässige Bestimmung der Eigenspannungen. Die vorliegende Arbeit präsentiert eine Reihe von Bedingungen, die für eine zuverlässige beugungsbasierte Eigenspannungsanalyse notwendig sind. Dies wird exemplarisch an einer mittels PBF-LB gefertigten Nickelbasis Superlegierung gezeigt. Einleitend wird ein Überblick der Literatur im Bereich der beugungsbasierten Eigenspannungsanalyse mit Bezug zur additiven Fertigung gegeben. Anschließend wird die elastische und plastische Anisotropie der mittels PBF-LB gefertigten Nickelbasis Superlegierung Inconel 718 durch in situ energiedispersive Synchrotron Röntgen- und Neutronenbeugung charakterisiert. Diese Methoden werden durch ex situ Untersuchungsverfahren ergänzt. So wird die Beziehung zwischen der Mikrostruktur und der Textur zur elastischen und plastischen Anisotropie hergestellt. Abschließend werden die Oberflächen-, oberflächennahen-, sowie Volumeneigenspannungen in einem texturbasierten Ansatz bestimmt. Dabei werden Unsicherheiten verschiedener Methoden zur Bestimmung der spannungsfreien Referenz diskutiert. Das mechanische Verhalten unter Zugbelastung des as-built Zustandes ist dabei durch die Textur und die zelluläre Substruktur bedingt, während es im wärmebehandelten Zustand vom Ausscheidungszustand und der geänderten Kornmorphologie bestimmt wird. Die Ergebnisse dieser Arbeit zeigen, dass die diffraktionselastischen Konstanten von der zugrundeliegenden Mikrostruktur abhängen. Für die kolumnaren Mikrostrukturen, egal ob im as-built oder wärmebehandeltem Zustand, werden die diffraktionselastischen Konstanten am besten durch die Reuss Annahme homogener Spannung beschrieben. Darüber hinaus zeigt die geringe Akkumulation intergranularer Dehnung des 311 Reflexes seine Robustheit für die beugungsbasierte Eigenspannungsanalyse. Im vorhandenen Fall ist der Unterschied zwischen texturbasierten und quasiisotropen Ansätzen zur Eigenspannungsanalyse unbedeutend. Oberflächennahe Eigenspannungsanalysen zeigen jedoch, dass verschiedene Scanstrategien zu einer Änderung in der Ausrichtung des Eigenspannungstensors führen. Weiterhin zeigt die Lage der kritischen oberflächennahen Zugeigenspannungen eine Abhängigkeit zur Oberflächenrauheit und dem Gefüge. Abschließend werden Empfehlungen zur beugungsbasierten Ermittlung und Bewertung von Eigenspannungen in texturierten additiv gefertigten Legierungen gegeben. KW - residual stress KW - diffraction KW - texture KW - mechanical behavior KW - in-situ testing KW - laser powder bed fusion KW - additive manufacturing KW - electron backscatter diffraction KW - diffraction elastic constants KW - Inconel 718 KW - Inconel 718 KW - additive Fertigung KW - Diffraktion KW - diffraktionselastische Konstanten KW - Elektronenrückstreubeugung KW - In-situ Experimente KW - Laserstrahlschmelzen KW - mechanisches Verhalten KW - Eigenspannung KW - Textur Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-621972 ER - TY - THES A1 - Shaw, Vasundhara T1 - Cosmic-ray transport and signatures in their local environment N2 - The origin and structure of magnetic fields in the Galaxy are largely unknown. What is known is that they are essential for several astrophysical processes, in particular the propagation of cosmic rays. Our ability to describe the propagation of cosmic rays through the Galaxy is severely limited by the lack of observational data needed to probe the structure of the Galactic magnetic field on many different length scales. This is particularly true for modelling the propagation of cosmic rays into the Galactic halo, where our knowledge of the magnetic field is particularly poor. In the last decade, observations of the Galactic halo in different frequency regimes have revealed the existence of out-of-plane bubble emission in the Galactic halo. In gamma rays these bubbles have been termed Fermi bubbles with a radial extent of ≈ 3 kpc and an azimuthal height of ≈ 6 kpc. The radio counterparts of the Fermi bubbles were seen by both the S-PASS telescopes and the Planck satellite, and showed a clear spatial overlap. The X-ray counterparts of the Fermi bubbles were named eROSITA bubbles after the eROSITA satellite, with a radial width of ≈ 7 kpc and an azimuthal height of ≈ 14 kpc. Taken together, these observations suggest the presence of large extended Galactic Halo Bubbles (GHB) and have stimulated interest in exploring the less explored Galactic halo. In this thesis, a new toy model (GHB model) for the magnetic field and non-thermal electron distribution in the Galactic halo has been proposed. The new toy model has been used to produce polarised synchrotron emission sky maps. Chi-square analysis was used to compare the synthetic skymaps with the Planck 30 GHz polarised skymaps. The obtained constraints on the strength and azimuthal height were found to be in agreement with the S-PASS radio observations. The upper, lower and best-fit values obtained from the above chi-squared analysis were used to generate three separate toy models. These three models were used to propagate ultra-high energy cosmic rays. This study was carried out for two potential sources, Centaurus A and NGC 253, to produce magnification maps and arrival direction skymaps. The simulated arrival direction skymaps were found to be consistent with the hotspots of Centaurus A and NGC 253 as seen in the observed arrival direction skymaps provided by the Pierre Auger Observatory (PAO). The turbulent magnetic field component of the GHB model was also used to investigate the extragalactic dipole suppression seen by PAO. UHECRs with an extragalactic dipole were forward-tracked through the turbulent GHB model at different field strengths. The suppression in the dipole due to the varying diffusion coefficient from the simulations was noted. The results could also be compared with an analytical analogy of electrostatics. The simulations of the extragalactic dipole suppression were in agreement with similar studies carried out for galactic cosmic rays. N2 - Unsere Galaxie wird ständig von hochenergetischen geladenen Teilchen unterschiedlicher Energie bombardiert, die als kosmische Strahlung bezeichnet werden und deren Ursprung nicht bekannt ist. Satelliten- und erdgestützte Messungen haben bisher ergeben, dass es in unserer Galaxie Beschleuniger für kosmische Strahlung gibt, z. B. die Überreste explodierender Sterne (Supernova-Überreste), aber bei den höchsten kosmischen Strahlungsenergien bleiben die Quellen ein Rätsel. Fortschritte zu erzielen ist eine Herausforderung, auch weil die kosmische Strahlung durch Magnetfelder abgelenkt wird, was bedeutet, dass die beobachtete Richtung mit der Richtung der Quelle übereinstimmen kann oder auch nicht. Unsere Galaxie weist starke Magnetfelder auf, deren Beschaffenheit noch nicht gut verstanden ist, insbesondere in der Komponente außerhalb der Scheibe (dem galaktischen Halo). Darüber hinaus haben Beobachtungen in den letzten zehn Jahren blasenartige Strukturen im galaktischen Halo mit enormen Gesamtenergien aufgedeckt, die auch als galaktische Halo-Blasen bezeichnet werden. All dies motiviert uns, den galaktischen Halo zu untersuchen. In meiner Doktorarbeit schlagen wir ein neues, vereinfachtes Magnetfeldmodell für galaktische Halo-Blasen vor. Das Modell umfasst sowohl strukturierte als auch turbulente Komponenten des Magnetfelds. Das vereinfachte Modell wurde mit Beobachtungsdaten verglichen, um den am besten passenden Parametersatz zusammen mit den Unsicherheiten zu erhalten. Ich untersuchte die Propagation der ultrahochenergetischen kosmischen Strahlung durch das vereinfachte Modell und untersuchte dessen Auswirkungen auf die Ankunftsrichtungen der ultrahochenergetischen kosmischen Strahlung für zwei potenzielle Quellen, Centaurus~A und NGC~253. Außerdem habe ich sowohl numerisch als auch analytisch abgeschätzt, wie stark ein Dipol der extragalaktischen kosmischen Strahlung durch verschiedene Konfigurationen der turbulenten Magnetfelder des vereinfachten Modells unterdrückt wird. Die Ergebnisse all dieser Arbeiten werden in dieser Arbeit im Detail vorgestellt. KW - galactic magnetic fields KW - synchrotron radiation KW - non-thermal radiation KW - ultra-high energy cosmic rays KW - cosmic ray propagation KW - Ausbreitung der kosmischen Strahlung KW - galaktische Magnetfelder KW - nicht-thermische Strahlung KW - Synchrotronstrahlung KW - ultrahochenergetische kosmische Strahlung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-620198 ER - TY - THES A1 - Sun, Bowen T1 - Energy losses in low-offset organic solar cells T1 - Energieverluste in organischen Solarzellen mit geringer Versetzung BT - from fundamental understanding to characterization considerations BT - von grundlegendem Verständnis bis zu Charakterisierungsüberlegungen N2 - Organic solar cells (OSCs) represent a new generation of solar cells with a range of captivating attributes including low-cost, light-weight, aesthetically pleasing appearance, and flexibility. Different from traditional silicon solar cells, the photon-electron conversion in OSCs is usually accomplished in an active layer formed by blending two kinds of organic molecules (donor and acceptor) with different energy levels together. The first part of this thesis focuses on a better understanding of the role of the energetic offset and each recombination channel on the performance of these low-offset OSCs. By combining advanced experimental techniques with optical and electrical simulation, the energetic offsets between CT and excitons, several important insights were achieved: 1. The short circuit current density and fill-factor of low-offset systems are largely determined by field-dependent charge generation in such low-offset OSCs. Interestingly, it is strongly evident that such field-dependent charge generation originates from a field-dependent exciton dissociation yield. 2. The reduced energetic offset was found to be accompanied by strongly enhanced bimolecular recombination coefficient, which cannot be explained solely by exciton repopulation from CT states. This implies the existence of another dark decay channel apart from CT. The second focus of the thesis was on the technical perspective. In this thesis, the influence of optical artifacts in differential absorption spectroscopy upon the change of sample configuration and active layer thickness was studied. It is exemplified and discussed thoroughly and systematically in terms of optical simulations and experiments, how optical artifacts originated from non-uniform carrier profile and interference can manipulate not only the measured spectra, but also the decay dynamics in various measurement conditions. In the end of this study, a generalized methodology based on an inverse optical transfer matrix formalism was provided to correct the spectra and decay dynamics manipulated by optical artifacts. Overall, this thesis paves the way for a deeper understanding of the keys toward higher PCEs in low-offset OSC devices, from the perspectives of both device physics and characterization techniques. N2 - Organische Solarzellen (OSZ) repräsentieren eine neue Generation von Solarzellen mit einer Vielzahl faszinierender Eigenschaften, darunter geringe Kosten, geringes Gewicht, ästhetisch ansprechendes Erscheinungsbild und Flexibilität. Im Gegensatz zu traditionellen Silizium-Solarzellen erfolgt die Umwandlung von Photonen in Elektronen in OSZ in der Regel in einer aktiven Schicht, die durch das Mischen von zwei Arten organischer Moleküle (Donator und Akzeptor) mit unterschiedlichen Energieniveaus gebildet wird. Der erste Teil dieser Arbeit konzentriert sich auf ein besseres Verständnis der Rolle des energetischen Versatzes und jedes Rekombinationskanals auf die Leistung dieser OSCs mit geringem Versatz. Durch die Kombination fortschrittlicher experimenteller Techniken mit optischer und elektrischer Simulation wurden wichtige Erkenntnisse über die energetischen Versätze zwischen CT und Exzitonen erlangt: 1. Die Stromdichte im Kurzschluss und der Füllfaktor von Systemen mit geringem Versatz werden weitgehend durch feldabhängige Ladungsgenerierung in solchen OSZ mit geringem Versatz bestimmt. Interessanterweise ist deutlich erkennbar, dass eine feldabhängige Ladungsgenerierung aus einer feldabhängigen Exzitonen-Dissociationsausbeute resultiert. 2. Der reduzierte energetische Versatz geht mit einem stark erhöhten bimolekularen Rekombinationskoeffizienten einher, der nicht allein durch die Wiederbevölkerung von Exzitonen aus CT-Zuständen erklärt werden kann. Dies deutet auf die Existenz eines anderen dunklen Zerfallsweges neben CT hin. Der zweite Schwerpunkt der Arbeit lag auf der technischen Perspektive. In dieser Arbeit wurde der Einfluss von optischen Artefakten in der differentiellen Absorptionsspektroskopie auf die Änderung der Probekonfiguration und der aktiven Schichtdicke untersucht. Es wird anhand optischer Simulationen und Experimente ausführlich und systematisch dargelegt und diskutiert, wie optische Artefakte, die durch ein nicht gleichmäßiges Ladungsprofil und Interferenzen verursacht werden, nicht nur die gemessenen Spektren, sondern auch die Zerfalldynamik in verschiedenen Messbedingungen manipulieren können. Am Ende dieser Studie wurde eine generalisierte Methodik auf Basis eines inversen optischen Übertragungsmatrixformalismus bereitgestellt, um die durch optische Artefakte manipulierten Spektren und Zerfalldynamiken zu korrigieren. Insgesamt ebnet diese Arbeit den Weg für ein tieferes Verständnis der Schlüsselaspekte für höhere Wirkungsgrade in OSZ mit geringem Versatz, sowohl aus Sicht der Gerätephysik als auch der Charakterisierungstechniken. KW - organic solar cell KW - organische Solarzelle KW - non-fullerene acceptors KW - Nicht-Fulleren-Akzeptoren KW - charge generation KW - Ladungsgenerierung KW - exciton dissociation KW - Exziton-Dissoziation KW - cavity effects KW - Hohlraumeffekte Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-621430 ER - TY - THES A1 - Stange, Maike T1 - A study on Coronin-A and Aip1 function in motility of Dictyostelium discoideum and on Aip1 interchangeability between Dictyostelium discoideum and Arabidopsis thaliana T1 - Studie über die Funktion von Coronin-A und Aip1 bei der Motilität von Dictyostelium discoideum und zur Aip1-Austauschbarkeit zwischen Dictyostelium discoideum und Arabidopsis thaliana N2 - Actin is one of the most highly conserved proteins in eukaryotes and distinct actin-related proteins with filament-forming properties are even found in prokaryotes. Due to these commonalities, actin-modulating proteins of many species share similar structural properties and proposed functions. The polymerization and depolymerization of actin are critical processes for a cell as they can contribute to shape changes to adapt to its environment and to move and distribute nutrients and cellular components within the cell. However, to what extent functions of actin-binding proteins are conserved between distantly related species, has only been addressed in a few cases. In this work, functions of Coronin-A (CorA) and Actin-interacting protein 1 (Aip1), two proteins involved in actin dynamics, were characterized. In addition, the interchangeability and function of Aip1 were investigated in two phylogenetically distant model organisms. The flowering plant Arabidopsis thaliana (encoding two homologs, AIP1-1 and AIP1-2) and in the amoeba Dictyostelium discoideum (encoding one homolog, DdAip1) were chosen because the functions of their actin cytoskeletons may differ in many aspects. Functional analyses between species were conducted for AIP1 homologs as flowering plants do not harbor a CorA gene. In the first part of the study, the effect of four different mutation methods on the function of Coronin-A protein and the resulting phenotype in D. discoideum was revealed in two genetic knockouts, one RNAi knockdown and a sudden loss-of-function mutant created by chemical-induced dislocation (CID). The advantages and disadvantages of the different mutation methods on the motility, appearance and development of the amoebae were investigated, and the results showed that not all observed properties were affected with the same intensity. Remarkably, a new combination of Selection-Linked Integration and CID could be established. In the second and third parts of the thesis, the exchange of Aip1 between plant and amoeba was carried out. For A. thaliana, the two homologs (AIP1-1 and AIP1-2) were analyzed for functionality as well as in D. discoideum. In the Aip1-deficient amoeba, rescue with AIP1-1 was more effective than with AIP1-2. The main results in the plant showed that in the aip1-2 mutant background, reintroduced AIP1-2 displayed the most efficient rescue and A. thaliana AIP1-1 rescued better than DdAip1. The choice of the tagging site was important for the function of Aip1 as steric hindrance is a problem. The DdAip1 was less effective when tagged at the C-terminus, while the plant AIP1s showed mixed results depending on the tag position. In conclusion, the foreign proteins partially rescued phenotypes of mutant plants and mutant amoebae, despite the organisms only being very distantly related in evolutionary terms. N2 - Actin ist eines der am stärksten konservierten Proteine in Eukaryoten und sogar Prokaryoten weisen Aktin-ähnliche Proteine mit filamentbildenden Eigenschaften auf. Aufgrund dieser Gemeinsamkeiten teilen Aktin-modulierte Proteine vieler Arten ähnliche strukturelle Eigenschaften und vermutlich auch Funktionen. Die Polymerisierung und Depolymerisation von Aktin sind kritische Prozesse für eine Zelle, da sie zu Zellformänderungen beitragen können, um sich an die Umgebung anzupassen und Nährstoffe sowie zelluläre Komponenten innerhalb der Zelle zu bewegen und zu verteilen. Inwieweit die Funktionen von Aktin-bindenden Proteinen zwischen entfernt verwandten Arten funktionell konserviert sind, wurde jedoch nur in wenigen Fällen untersucht. In dieser Arbeit wurden Funktionen von Coronin-A (CorA) und Actin-interagierendem Protein 1 (AIP1), zweier an der Aktindynamik beteiligter Proteine, charakterisiert. Darüber hinaus wurde die Austauschbarkeit und Funktion von AIP1 in zwei phylogenetisch entfernten Modellorganismen untersucht. Die Blütenpflanze Arabidopsis thaliana (kodiert für zwei Homologe: AIP1-1 und AIP1-2) und die Amöbe Dictyostelium discoideum (kodiert für ein Homolog: DdAip1) wurden ausgewählt, weil die Funktionen ihrer Aktin-Zytoskelette in mehreren Aspekten verschieden sein könnten. Funktionelle Analysen zwischen Arten wurden für AIP1-Homologe durchgeführt, da Blütenpflanzen kein CorA Gen tragen. Im ersten Teil der Arbeit wurde die Wirkung von vier verschiedenen Mutationsmethoden auf die Funktion des CorA-Proteins und des resultierenden Phänotyps in D. discoideum in zwei genetischen Knockouts, einem RNAi Knockdown und einem durch chemisch induzierte Delokalisierung (CID) erzeugten Mutanten geprüft. Die Vor- und Nachteile der Methoden zur Motilität, des Aussehens und der Entwicklung der Amöben wurden untersucht. Die Ergebnisse zeigten, dass nicht alle beobachteten Eigenschaften mit der gleichen Intensität beeinflusst wurden. Hierbei wurde eine neue Methodenkombination aus selektionsgebundener Integration und CID etabliert. Im zweiten und im dritten Teil der Arbeit wurde der Austausch von AIP1 zwischen Pflanze und Amöben durchgeführt. Die zwei A. thaliana-Homologe AIP1-1 und AIP1-2 wurden auf Funktionalität in D. discoideum geprüft. In Aip1-defizienten Amöben war die Rettung mit AIP1-1 effektiver als bei AIP1-2. Die Hauptergebnisse der Arbeit wiesen darauf hin, dass AIP1-2 im aip1.2-1 act7 Mutantenhintergrund die effizienteste Rettung zeigte, während A. thaliana AIP1-1 effizienter rettete als DdAip1. Die Auswahl der Tagging-Site war für die AIP1-Funktion bedeutend, da sterische Hinderung eine Rolle spielen könnte. DdAip1 war weniger effektiv, wenn es am C-Terminus fusioniert war, während die Proteinfusionen der A. thaliana AIP1s je nach Position der „tags“ unterschiedliche Ergebnisse zeigten. Zusammenfassend retteten die fremden Proteine teilweise Phänotypen von mutierten Pflanzen und mutierten Amöben, obwohl die Organismen evolutionär weit entfernt verwandt sind. KW - actin KW - cell motility KW - plant growth KW - selection-linked integration KW - chemically induced dislocation KW - interspecies interchange KW - Aktin KW - Zellmotilität KW - Pflanzenwachstum KW - Selection-Linked Integration KW - chemisch-induzierte Dislokation KW - Austausch zwischen zwei Spezies Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-628569 ER - TY - THES A1 - Alawashra, Mahmoud T1 - Plasma instabilities of TeV pair beams induced by blazars T1 - Plasma Instabilitäten von TeV-Paar Strahlen durch Blazare induziert N2 - Relativistic pair beams produced in the cosmic voids by TeV gamma rays from blazars are expected to produce a detectable GeV-scale cascade emission missing in the observations. The suppression of this secondary cascade implies either the deflection of the pair beam by intergalactic magnetic fields (IGMFs) or an energy loss of the beam due to the electrostatic beam-plasma instability. IGMF of femto-Gauss strength is sufficient to significantly deflect the pair beams reducing the flux of secondary cascade below the observational limits. A similar flux reduction may result in the absence of the IGMF from the beam energy loss by the instability before the inverse Compton cooling. This dissertation consists of two studies about the instability role in the evolution of blazar-induced beams. Firstly, we investigated the effect of sub-fG level IGMF on the beam energy loss by the instability. Considering IGMF with correlation lengths smaller than a few kpc, we found that such fields increase the transverse momentum of the pair beam particles, dramatically reducing the linear growth rate of the electrostatic instability and hence the energy-loss rate of the pair beam. Our results show that the IGMF eliminates beam plasma instability as an effective energy-loss agent at a field strength three orders of magnitude below that needed to suppress the secondary cascade emission by magnetic deflection. For intermediate-strength IGMF, we do not know a viable process to explain the observed absence of GeV-scale cascade emission and hence can be excluded. Secondly, we probed how the beam-plasma instability feeds back on the beam, using a realistic two-dimensional beam distribution. We found that the instability broadens the beam opening angles significantly without any significant energy loss, thus confirming a recent feedback study on a simplified one-dimensional beam distribution. However, narrowing diffusion feedback of the beam particles with Lorentz factors less than 1e6 might become relevant even though initially it is negligible. Finally, when considering the continuous creation of TeV pairs, we found that the beam distribution and the wave spectrum reach a new quasi-steady state, in which the scattering of beam particles persists and the beam opening angle may increase by a factor of hundreds. This new intrinsic scattering of the cascade can result in time delays of around ten years, thus potentially mimicking the IGMF deflection. Understanding the implications on the GeV cascade emission requires accounting for inverse Compton cooling and simulating the beam-plasma system at different points in the IGM. N2 - Relativistische Teilchenstrahlen, erzeugt in den Weiten des Weltraums durch TeV- Gammastrahlen von Blazaren, sollen eine Art von Emission im GeV-Bereich erzeugen. Diese Emission wurde jedoch bisher nicht beobachtet. Der Grund für diese fehlende Emission könnte eine von zwei Ursachen sein: Entweder werden die Teilchenstrahlen von den Magnetfeldern im Weltraum (den sogenannten intergalaktischen Magnetfeldern oder IGMFs) umgeleitet, oder die Strahlen verlieren ihre Energie aufgrund einer Art von Instabilität namens Strahlungs-Plasma-Instabilität. Wenn die IGMFs extrem schwach sind (im Femto-Gauss-Bereich gemessen), können sie dennoch eine große Wirkung auf die Teilchenstrahlen haben, indem sie diese von ihrem Kurs abbringen und die Menge der fehlenden Emission verringern. Andererseits kann die Strahlungs-Plasma-Instabilität die Energieverluste der Strahlen verursachen, wenn es keine IGMFs gibt. Diese Forschung besteht aus zwei Studien. In der ersten Studie haben Wissenschaftler erforscht, wie schwache IGMFs den Energieverlust der Strahlen aufgrund von Instabilität beeinflussen. Sie stellten fest, dass diese schwachen Felder den Impuls der Teilchenstrahlen erheblich verändern können, was den Energieverlust aufgrund der Instabilität erheblich verlangsamt. Dies bedeutet, dass selbst extrem schwache IGMFs die Strahlungs Plasma-Instabilität unwirksam machen können, wenn es darum geht, Energieverluste zu verursachen. In der zweiten Studie haben sie untersucht, wie die Strahlungs-Plasma-Instabilität die Teilchenstrahlen beeinflusst. Sie entdeckten, dass die Instabilität den Winkel der Strahlen erweitert, ohne signifikante Energieverluste zu verursachen. Im Laufe der Zeit könnten jedoch Partikel mit niedrigeren Energien anfangen, Energie zu verlieren. Wenn man die kontinuierliche Erzeugung von hochenergetischen Teilchen berücksichtigt, stellten sie fest, dass die Verteilung der Strahlen und das Wellenspektrum schließlich einen stabilen Zustand erreichen, in dem die Partikel weiterhin gestreut werden und der Strahlenwinkel sich erheblich vergrößern kann. Diese intrinsische Streuung der Emission kann Zeitspannen verursachen, die es so aussehen lassen, als ob die IGMFs die Emission umlenken. Um die Auswirkungen auf die fehlende GeV-Emission vollständig zu verstehen, müssen Wissenschaftler Faktoren wie inverse-Compton-Kühlung berücksichtigen und die Wechselwirkung zwischen den Teilchenstrahlen und dem umgebenden Plasma an verschiedenen Stellen im Weltraum simulieren. KW - gamma rays: general KW - instabilities KW - blazar KW - relativistic processes KW - waves KW - Blazar KW - Gammastrahlen: allgemein KW - Instabilitäten KW - relativistische Prozesse KW - Wellen Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-630131 ER - TY - THES A1 - Littmann, Daniela-Christin T1 - Large eddy simulations of the Arctic boundary layer around the MOSAiC drift track T1 - Large-Eddy-Simulationen der arktischen Grenzschicht um die MOSAiC-Driftroute N2 - The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km. The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term. The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions. The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models. N2 - Das icosahedral non-hydrostatische large eddy model (ICON-LEM) wurde entlang des Driftweges des Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 und 20 angewendet. Das Modell nutzte horizontale Gitterauflösungen zwischen 100m und 800m auf Gebieten mit Durchmessern von 17.5km und 140 km. An den seitlichen Rändern wurde das Modell mit Analysedaten des Deutschen Wetterdienstes (DWD) angetrieben, welche mit ICON im limited area mode (ICON-LAM) mit einer horizontalen Auflösung von 3km herunterskaliert wurden. Ziel dieser Arbeit war es, die flache atmosphärische Grenzschicht in der zentralen Arktis während des polaren Winters mit einem hochauflösenden mesoskaligen Modell zu untersuchen. Die standardmäßigen Einstellungen in ICON-LEM machen es dem Modell unmöglich, die wechselwirkenden Austauschprozesse in der arktischen Grenzschicht gemäß der MOSAiC Beobachtungen abzubilden. Das implementierte Meereis-Schema in ICON beinhaltet keine Schneeschicht auf dem Meereis, was eine zu große Verzögerung der Meereisoberflächentemperatur auf atmosphärische Veränderungen bewirkt. Um die Meereisfläche schneller auf Änderungen in der Atmosphäre reagieren lassen zu können, wurde die bestehende Meereisparameterisierung in ICON um einen angepasstenWärmekapazitätsterm erweitert. Die angepasste Meereis-Parameterisierung stimmte besser mit den MOSAiC Beobachtungen überein. Allerdings ist die Meereisoberflächentemperatur im Modell aufgrund der fehlerbehafteten einfallenden, langwelligen Strahlung und dem Fehlen komplexer Oberflächenstrukturen im Meereis generell niedriger als beobachtet. Die groß-wirbellige Turbulenz-Schliessung wird der Darstellung der unteren Grenschicht während starker stabiler Schichtung besser gerecht als die Nicht-Wirbel-auflösende Turbulenz-Schließung. Desweiteren reduzierte die Integration der Risse in der Meereisoberfläche die Abweichung der sensiblen Wärme für verschiedene Wetterzustände. Die Ergebnisse dieser Arbeit helfen die Grenzschicht-Prozesse in der zentralen Arktis während der polaren Nacht besser zu verstehen. Hochauflösende mesoskalige Simulationen ermöglichen die Repräsentation zeitlicher und räumlicher klein-skaliger Wechselwirkungen und bestehende Parametrisierungen auch für regionale und globale Modelle weiterzuentwickeln. KW - Arctic KW - atmosphere KW - atmospheric science KW - high resolution KW - boundary layer KW - stable stratification KW - heat flux KW - heat capacity KW - Arktis KW - Atmosphäre KW - Atmosphärenforschung KW - hohe Auflösung KW - Grenzschicht KW - stabile Schichtung KW - Wärmefluss KW - Wärmekapazität Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-624374 ER - TY - THES A1 - Ketzer, Laura T1 - The impact of stellar activity evolution on atmospheric mass loss of young exoplanets T1 - Der Einfluss der stellaren Aktivitätsentwicklung auf den atmosphärischen Massenverlust von jungen Exoplaneten N2 - The increasing number of known exoplanets raises questions about their demographics and the mechanisms that shape planets into how we observe them today. Young planets in close-in orbits are exposed to harsh environments due to the host star being magnetically highly active, which results in high X-ray and extreme UV fluxes impinging on the planet. Prolonged exposure to this intense photoionizing radiation can cause planetary atmospheres to heat up, expand and escape into space via a hydrodynamic escape process known as photoevaporation. For super-Earth and sub-Neptune-type planets, this can even lead to the complete erosion of their primordial gaseous atmospheres. A factor of interest for this particular mass-loss process is the activity evolution of the host star. Stellar rotation, which drives the dynamo and with it the magnetic activity of a star, changes significantly over the stellar lifetime. This strongly affects the amount of high-energy radiation received by a planet as stars age. At a young age, planets still host warm and extended envelopes, making them particularly susceptible to atmospheric evaporation. Especially in the first gigayear, when X-ray and UV levels can be 100 - 10,000 times higher than for the present-day sun, the characteristics of the host star and the detailed evolution of its high-energy emission are of importance. In this thesis, I study the impact of stellar activity evolution on the high-energy-induced atmospheric mass loss of young exoplanets. The PLATYPOS code was developed as part of this thesis to calculate photoevaporative mass-loss rates over time. The code, which couples parameterized planetary mass-radius relations with an analytical hydrodynamic escape model, was used, together with Chandra and eROSITA X-ray observations, to investigate the future mass loss of the two young multiplanet systems V1298 Tau and K2-198. Further, in a numerical ensemble study, the effect of a realistic spread of activity tracks on the small-planet radius gap was investigated for the first time. The works in this thesis show that for individual systems, in particular if planetary masses are unconstrained, the difference between a young host star following a low-activity track vs. a high-activity one can have major implications: the exact shape of the activity evolution can determine whether a planet can hold on to some of its atmosphere, or completely loses its envelope, leaving only the bare rocky core behind. For an ensemble of simulated planets, an observationally-motivated distribution of activity tracks does not substantially change the final radius distribution at ages of several gigayears. My simulations indicate that the overall shape and slope of the resulting small-planet radius gap is not significantly affected by the spread in stellar activity tracks. However, it can account for a certain scattering or fuzziness observed in and around the radius gap of the observed exoplanet population. N2 - Die steigende Anzahl bekannter Exoplaneten wirft Fragen zu ihrer Demografie und den Mechanismen auf, die Planeten in ihre heutige beobachtete Form bringen. Junge Planeten, die sehr nah um ihren Wirtsstern kreisen, sind extremen Umgebungen ausgesetzt, da der Stern eine hohe magnetische Aktivität aufweist. Das führt wiederum dazu, dass der Planet einer enormen Röntgen- und Extrem-UV-Strahlung ausgesetzt ist. Ist der Planet über einen längeren Zeitraum dieser intensiven photoionisierenden Strahlung ausgesetzt, kann dies dazu führen, dass Planetenatmosphären sich aufheizen, ausdehnen und durch einen hydrodynamischen Entweichungsprozess namens Photoevaporation ins All entweichen, sozusagen verdampfen. Bei Planeten, in der Größenordnung von Super-Erden und Sub-Neptunen, kann dies sogar zur vollständigen Erosion ihrer Ur-Atmosphären führen. Ein interessanter Faktor, der für diesen Massenverlustprozess eine Rolle spielt, ist die Aktivitätsentwicklung des Wirtssterns. Die Rotation eines Sterns, die den Dynamo und damit die magnetische Aktivität antreibt, ändert sich im Laufe der Lebensdauer eines Sterns erheblich. Dies hat einen starken Einfluss auf die Menge der hochenergetischen Strahlung, den ein Planet mit zunehmendem Alter des Sterns empfängt. In jungen Jahren besitzen Planeten noch warme und ausgedehnte Hüllen, was sie besonders anfällig für atmosphärische Verdunstung macht. Insbesondere in den ersten Gigajahren, wenn die Röntgen- und UV-Strahlung 100 - 10,000 Mal höher sein kann als bei der heutigen Sonne, sind die Eigenschaften des Wirtssterns und die detaillierte Entwicklung seiner hochenergetischen Emission von Bedeutung. In dieser Arbeit untersuche ich die Auswirkungen der Entwicklung der stellaren Aktivität auf den durch hochenergetische Strahlung verursachten atmosphärischen Massenverlust junger Exoplaneten. Der PLATYPOS-Code wurde im Rahmen dieser Arbeit entwickelt, um die photoevaporativen Massenverlustraten für verschiedene stellare Alter zu berechnen. Der Code verknüpft parametrisierte Planetenmasse-Radius-Beziehungen mit einem analytischen Modell für den hydrodynamischen Massenverlust. Er wurde zusammen mit Chandra- und eROSITA-Röntgenbeobachtungen dazu verwendet, den zukünftigen Massenverlust der beiden jungen Mehrplanetensysteme V1298 Tau und K2-198 zu untersuchen. Darüber hinaus wurde in einer numerischen Ensemblestudie erstmals der Effekt einer realistischen Verteilung von stellaren Aktivitäts-Tracks auf das sogenannte Radius-Tal bei kleinen Planeten untersucht. Die Arbeiten in dieser Dissertation zeigen, dass für einzelne Systeme, insbesondere wenn die Planetenmassen unbestimmt sind, der Unterschied zwischen einem jungen Wirtsstern, der einem Track mit niedriger Aktivität gegenüber einem solchen mit hoher Aktivität folgt, gravierende Auswirkungen haben kann: Die genaue Form der Aktivitätsentwicklung kann darüber entscheiden, ob ein Planet einen Teil seiner Atmosphäre behält oder seine Hülle vollständig verliert und nur den nackten Gesteinskern behält. Für ein Ensemble von simulierten Planeten ändert eine durch Beobachtungen motivierte Verteilung von Aktivitäts-Tracks die endgültige Radiusverteilung der Planeten nach mehreren Gigajahren nicht wesentlich. Meine Simulationen deuten darauf hin, dass die Form und Steigung des sich ergebenden Radius-Tals bei Kleinplaneten nicht wesentlich von der Streuung der stellaren Aktivitäts-Tracks beeinflusst wird. Eine gewisse Streuung oder Unschärfe im Radius-Tal der beobachteten Exoplanetenpopulation kann damit allerdings durchaus erklärt werden. KW - Exoplaneten KW - star-planet interaction KW - stellar physics KW - exoplanets KW - exoplanet atmospheres KW - Sternphysik KW - Stern-Planeten-Wechselwirkung KW - Exoplanetenatmosphären Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-626819 ER - TY - THES A1 - Gostkowska-Lekner, Natalia Katarzyna T1 - Organic-inorganic hybrids based on P3HT and mesoporous silicon for thermoelectric applications T1 - Organisch-anorganische Hybride basierend auf P3HT und porösem Silizium für thermoelektrische Anwendungen N2 - This thesis presents a comprehensive study on synthesis, structure and thermoelectric transport properties of organic-inorganic hybrids based on P3HT and porous silicon. The effect of embedding polymer in silicon pores on the electrical and thermal transport is studied. Morphological studies confirm successful polymer infiltration and diffusion doping with roughly 50% of the pore space occupied by conjugated polymer. Synchrotron diffraction experiments reveal no specific ordering of the polymer inside the pores. P3HT-pSi hybrids show improved electrical transport by five orders of magnitude compared to porous silicon and power factor values comparable or exceeding other P3HT-inorganic hybrids. The analysis suggests different transport mechanisms in both materials. In pSi, the transport mechanism relates to a Meyer-Neldel compansation rule. The analysis of hybrids' data using the power law in Kang-Snyder model suggests that a doped polymer mainly provides charge carriers to the pSi matrix, similar to the behavior of a doped semiconductor. Heavily suppressed thermal transport in porous silicon is treated with a modified Landauer/Lundstrom model and effective medium theories, which reveal that pSi agrees well with the Kirkpatrick model with a 68% percolation threshold. Thermal conductivities of hybrids show an increase compared to the empty pSi but the overall thermoelectric figure of merit ZT of P3HT-pSi hybrid exceeds both pSi and P3HT as well as bulk Si. N2 - Diese Arbeit präsentiert eine umfassende Studie über Synthese, Struktur und thermoelektrische Transporteigenschaften von organisch-anorganischen Hybriden basierend auf P3HT und porösem Silizium. Es wird die Auswirkung der Einbettung von Polymerin Siliziumporen auf den elektrischen und thermischen Transport untersucht. Morphologische Studien bestätigen eine erfolgreiche Polymerinfiltration und Diffusionsdotierung, wobei etwa 50% des Porenraums mit konjugiertem Polymer gefüllt sind. Synchrotronexperimente zeigen keine spezifische Ordnung des Polymers innerhalb der Poren. P3HT-pSi-Hybride zeigen einen um fünf Größenordnungen verbesserten elektrischen Transport im Vergleich zu porösem Silizium und sogenannte Powerfaktoren, die mit anderen P3HT-anorganischen Hybriden vergleichbar sind oder diese übertreffen. Die Analyse lässt auf unterschiedliche Transportmechanismen in beiden Materialien schließen. In pSi bezieht sich der Transportmechanismus auf eine Meyer-Neldel-{Kompensa\-tionsregel}. Die Analyse der Hybriddaten unter Verwendung des Potenzgesetzes im Kang-Snyder-Modell legt nahe, dass ein dotiertes Polymer hauptsächlich Ladungsträger für die pSi-Matrix bereitstellt, ähnlich dem Verhalten eines {dotier\-ten} Halbleiters. Der stark unterdrückte Wärmetransport in porösem Silizium wird mit einem modifizierten Landauer/Lundstrom-Modell und Effektivmediumtheorien behandelt, die zeigen, dass pSi mit einem Perkolationsschwellenwert von 68% gut mit dem Kirkpatrick-Modell übereinstimmt. Die {Wärmeleitfähigkei\-ten} von Hybriden zeigen einen Anstieg im Vergleich zum leeren pSi, aber der gesamte thermoelektrische Gütefaktor ZT des P3HT-pSi-Hybrids übertrifft sowohl pSi und P3HT als auch den von Bulk-Si. KW - physics KW - energy KW - thermoelectricity KW - organic-inorganic hybrids KW - Energie KW - organisch-anorganische Hybride KW - Physik KW - Thermoelektrizität Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-620475 ER - TY - THES A1 - Ronneberger, Sebastian T1 - Nanolayer Fused Deposition Modeling (NanoFDM) BT - from 2D information labels to 4D printing Y1 - 2024 ER - TY - THES A1 - Ehlert, Kristian T1 - Simulations of active galactic nuclei feedback with cosmic rays and magnetic fields N2 - The central gas in half of all galaxy clusters shows short cooling times. Assuming unimpeded cooling, this should lead to high star formation and mass cooling rates, which are not observed. Instead, it is believed that condensing gas is accreted by the central black hole that powers an active galactic nuclei jet, which heats the cluster. The detailed heating mechanism remains uncertain. A promising mechanism invokes cosmic ray protons that scatter on self-generated magnetic fluctuations, i.e. Alfvén waves. Continuous damping of Alfvén waves provides heat to the intracluster medium. Previous work has found steady state solutions for a large sample of clusters where cooling is balanced by Alfvénic wave heating. To verify modeling assumptions, we set out to study cosmic ray injection in three-dimensional magnetohydrodynamical simulations of jet feedback in an idealized cluster with the moving-mesh code arepo. We analyze the interaction of jet-inflated bubbles with the turbulent magnetized intracluster medium. Furthermore, jet dynamics and heating are closely linked to the largely unconstrained jet composition. Interactions of electrons with photons of the cosmic microwave background result in observational signatures that depend on the bubble content. Those recent observations provided evidence for underdense bubbles with a relativistic filling while adopting simplifying modeling assumptions for the bubbles. By reproducing the observations with our simulations, we confirm the validity of their modeling assumptions and as such, confirm the important finding of low-(momentum) density jets. In addition, the velocity and magnetic field structure of the intracluster medium have profound consequences for bubble evolution and heating processes. As velocity and magnetic fields are physically coupled, we demonstrate that numerical simulations can help link and thereby constrain their respective observables. Finally, we implement the currently preferred accretion model, cold accretion, into the moving-mesh code arepo and study feedback by light jets in a radiatively cooling magnetized cluster. While self-regulation is attained independently of accretion model, jet density and feedback efficiencies, we find that in order to reproduce observed cold gas morphology light jets are preferred. N2 - Das zentrale Gas in der Hälfte aller Galaxienhaufen weist kurze Kühlzeiten auf. Dies sollte zu hohen Sternentstehungs- und Massenkühlungsraten führen. Bei ungehinderter Kühlung würden jedoch viel mehr Sterne entstehen als beobachtet. Stattdessen wird vermutet, dass das kondensierende Gas durch das zentrale Schwarze Loch akkretiert wird, das einen aktiven Galaxienkerne antreibt, der den Haufen heizt. Der genaue Heizmechanismus ist noch unklar. Ein vielversprechender Mechanismus geht von Protonen der kosmischen Strahlung aus, die an selbst erzeugten magnetischen Fluktuationen, d.h. Alfvénwellen, streuen. Die kontinuierliche Dämpfung der Alfvénwellen heizt das Gas. Für eine große Anzahl von Galaxienhaufen wurden stationäre Lösungen gefunden, bei denen Kühlen durch Alfvénwellenheizen ausgeglichen wird. Um die Modellierungsannahmen zu überprüfen, untersuchen wir die CR-Injektion in magnetohydrodynamischen 3D-Simulationen von Jets in einem idealisierten Cluster mit dem Code arepo. Wir simulieren die Entstehung und Entwicklung von Gasblasen durch energetische Ausflüsse in einer turbulenten, magnetische Atmosphäre. Darüberhinaus ist die Dynamik des Jets und das Heizen eng verknüpft mit der soweit unklaren Zusammensetzung des Jets. DieWechselwirkung von Elektronen mit dem kosmischen Mikrowellenhintergrund führt zu beobachtbaren Signaturen, die vom Inhalt der Blasen abhängen. Diese jüngsten Beobachtungen lieferten Beweise für unterdichte Blasen mit einer relativistischen Füllung, wobei vereinfachende Modellannahmen für die Blasen angenommen wurden. Indem wir die Beobachtungen mit unseren Simulationen reproduzieren, bestätigen wir die Gültigkeit ihrer Modellannahmen und damit die wichtige Erkenntnis, dass Jets eine niedrige (Impuls-)Dichte haben. Außerdem haben die Geschwindigkeits- und Magnetfeldstruktur der Haufenatmosphäre tiefgreifende Auswirkungen auf die Blasenentwicklung und Heizprozesse. Da Geschwindigkeits- und Magnetfelder physikalisch gekoppelt sind, zeigen wir, dass numerische Simulationen dazu beitragen können, die jeweiligen Beobachtungsdaten in direkte Verbindung zu setzen, um sie dadurch besser abschätzen zu können. Schließlich implementieren wir das derzeit bevorzugte Akkretionsmodell, cold accretion, in arepo und untersuchen die Rückkopplung durch leichte Jets in einem explizit kühlenden magnetisierten Haufen. Während die Selbstregulierung unabhängig vom Akkretionsmodell, der Jetdichte und der Jeteffizienz erreicht wird, ist die Morphologie des kalten Gases bei Simulationen mit leichten Jets Beobachtungen am ähnlichsten. T2 - Simulationen vom Heizen von Galaxienhaufen durch aktive Galaxienkerne mit kosmischer Strahlung und Magnetfeldern KW - galaxy clusters KW - intracluster medium KW - active galactic nuclei KW - magnetohydrodynamics KW - cosmic rays KW - Galaxienhaufen KW - aktive Galaxienkerne KW - Magnetohydrodynamik KW - kosmische Strahlung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-578168 ER - TY - THES A1 - De Andrade Queiroz, Anna Barbara T1 - The Milky Way disks, bulge, and bar sub-populations T1 - Die Scheiben, der Bulge und der Balken der Milchstraße Subpopulationen BT - a chemo-dynamical view of our Galaxy in the APOGEE + Gaia era BT - ein chemodynamischer Blick auf unsere Galaxie in der APOGEE + Gaia Ära N2 - In recent decades, astronomy has seen a boom in large-scale stellar surveys of the Galaxy. The detailed information obtained about millions of individual stars in the Milky Way is bringing us a step closer to answering one of the most outstanding questions in astrophysics: how do galaxies form and evolve? The Milky Way is the only galaxy where we can dissect many stars into their high-dimensional chemical composition and complete phase space, which analogously as fossil records can unveil the past history of the genesis of the Galaxy. The processes that lead to large structure formation, such as the Milky Way, are critical for constraining cosmological models; we call this line of study Galactic archaeology or near-field cosmology. At the core of this work, we present a collection of efforts to chemically and dynamically characterise the disks and bulge of our Galaxy. The results we present in this thesis have only been possible thanks to the advent of the Gaia astrometric satellite, which has revolutionised the field of Galactic archaeology by precisely measuring the positions, parallax distances and motions of more than a billion stars. Another, though not less important, breakthrough is the APOGEE survey, which has observed spectra in the near-infrared peering into the dusty regions of the Galaxy, allowing us to determine detailed chemical abundance patterns in hundreds of thousands of stars. To accurately depict the Milky Way structure, we use and develop the Bayesian isochrone fitting tool/code called StarHorse; this software can predict stellar distances, extinctions and ages by combining astrometry, photometry and spectroscopy based on stellar evolutionary models. The StarHorse code is pivotal to calculating distances where Gaia parallaxes alone cannot allow accurate estimates. We show that by combining Gaia, APOGEE, photometric surveys and using StarHorse, we can produce a chemical cartography of the Milky way disks from their outermost to innermost parts. Such a map is unprecedented in the inner Galaxy. It reveals a continuity of the bimodal chemical pattern previously detected in the solar neighbourhood, indicating two populations with distinct formation histories. Furthermore, the data reveals a chemical gradient within the thin disk where the content of 𝛼-process elements and metals is higher towards the centre. Focusing on a sample in the inner MW we confirm the extension of the chemical duality to the innermost regions of the Galaxy. We find stars with bar shape orbits to show both high- and low-𝛼 abundances, suggesting the bar formed by secular evolution trapping stars that already existed. By analysing the chemical orbital space of the inner Galactic regions, we disentangle the multiple populations that inhabit this complex region. We reveal the presence of the thin disk, thick disk, bar, and a counter-rotating population, which resembles the outcome of a perturbed proto-Galactic disk. Our study also finds that the inner Galaxy holds a high quantity of super metal-rich stars up to three times solar suggesting it is a possible repository of old super-metal-rich stars found in the solar neighbourhood. We also enter into the complicated task of deriving individual stellar ages. With StarHorse, we calculate the ages of main-sequence turn-off and sub-giant stars for several public spectroscopic surveys. We validate our results by investigating linear relations between chemical abundances and time since the 𝛼 and neutron capture elements are sensitive to age as a reflection of the different enrichment timescales of these elements. For further study of the disks in the solar neighbourhood, we use an unsupervised machine learning algorithm to delineate a multidimensional separation of chrono-chemical stellar groups revealing the chemical thick disk, the thin disk, and young 𝛼-rich stars. The thick disk is shown to have a small age dispersion indicating its fast formation contrary to the thin disk that spans a wide range of ages. With groundbreaking data, this thesis encloses a detailed chemo-dynamical view of the disk and bulge of our Galaxy. Our findings on the Milky Way can be linked to the evolution of high redshift disk galaxies, helping to solve the conundrum of galaxy formation. N2 - In den letzten Jahrzehnten hat die Astronomie mit großen galaktischen Durchmusterungen einen Boom erlebt. Die dadurch gewonnenen detaillierten Informationen über Millionen von Einzelsternen in der Milchstraße bringen uns der Beantwortung einer der wichtigsten Fragen der Astrophysik einen Schritt näher: Wie entstehen und entwickeln sich Galaxien? Die Milchstraße ist die einzige Galaxie, in der wir viele Sterne in ihre hochdimensionale chemische Zusammensetzung und ihren vollständigen Phasenraum zerlegen können, was analog zu fossilen Aufzeichnungen die Entstehungsgeschichte der Galaxie enthüllen kann. Für kosmologische Modelle ist es von entscheidender Bedeutung, die Prozesse zu verstehen, die zur Bildung großer Strukturen wie der Milchstraße führen; wir nennen diese Studienrichtung Galaktische Archäologie oder Nahfeldkosmologie. Im Mittelpunkt dieser Arbeit stehen die Bemühungen, die Scheiben und den Bulge unserer Galaxie chemisch und dynamisch zu charakterisieren. Die Ergebnisse, die wir in dieser Arbeit vorstellen, waren nur dank des starts des astrometrischen Satelliten Gaia möglich, der das Gebiet der galaktischen Archäologie durch die präzise Messung der Positionen, Parallaxenwinkel und Eigenbewegungen von mehr als einer Milliarde Sterne revolutioniert hat. Ein weiterer, aber nicht minder wichtiger Durchbruch ist die APOGEE-Durchmusterung, die Spektren im nahen Infrarot beobachtet hat, was es uns erlaubt, durch die staubigen Regionen der Milchstraße hindurchzublicken und die chemischen Fingerabdrücke von Hunderttausenden von Sternen zu bestimmen. Um die Struktur der Milchstraße genau darzustellen, verwenden und entwickeln wir das Isochrone-fitting-Tool StarHorse; diese Software kann Sternentfernungen, Aussterbezeiten und Alter vorhersagen, indem sie Astrometrie, Photometrie und Spektroskopie auf der Grundlage von Modellen der Sternentwicklung kombiniert. Der Code StarHorse ist von zentraler Bedeutung für die Berechnung von Entfernungen, bei denen Gaia -Parallaxen allein keine Bestimmung ermöglichen. Wir zeigen, dass wir durch die Kombination von Gaia, APOGEE und StarHorse eine chemische Kartographie der Milchstraßenscheiben von ihrem äußersten bis zum innersten Teil erstellen können. Eine solche Karte ist in der inneren Galaxis beispiellos und zeigt ein bimodales chemisches Muster, das auf zwei Populationen mit unterschiedlichen Entstehungsgeschichten hinweist. Darüber hinaus bestätigen die Daten einen chemischen Gradienten innerhalb der dünnen Scheibe, bei dem der Gehalt an Elementen und Metallen aus 𝛼-Prozessen zum Zentrum hin zunimmt ist. Eine Überdichte in der Anzahl der Sterne bestätigt zudem die Signatur eines Balkens in der inneren Galaxie. Modelle der Galaxienentstehung sagen gewöhnlich deren Beginn im galaktischen Zentrum voraus. Wir konzentrieren uns auf eine Stichprobe in der inneren Galaxie und erwarten, dass wir primordiale stellare Populationen finden. Wir bestätigen die chemische Bimodalität der inneren Galaxie und dass der galaktische Balken sowohl aus Sternen mit hohem als auch mit niedrigem 𝛼 besteht, was darauf hindeutet, dass sich der Balken durch säkulare Evolution gebildet hat, bei der bereits existierende Sterne eingefangen wurden. Durch die Analyse des chemischen Orbitalraums der inneren galaktischen Regionen können wir die verschiedenen Populationen, die diese komplexe Region bewohnen, unterscheiden. Wir zeigen das Vorhandensein einer dünnen Scheibe, einer dicken Scheibe, eines Balkens und einer gegenläufig rotierenden Population, die dem Ergebnis einer gestörten proto-galaktischen Scheibe ähnelt. Unsere Studie zeigt auch, dass die innere Galaxie eine große Menge an supermetallreichen Sternen enthält, die bis zum Dreifachen der solaren Metallizität reichen. Möglicherweise handelt es sich bei der Gruppe alter supermetallreicher Sterne, die in der Sonnenumgebung gefunden wurden um Kandidaten für Migranten aus den innersten Regionen. Wir befassen uns auch mit der komplizierten Aufgabe der Bestimmung individueller Sternalter. Mit StarHorse berechnen wir das Alter von Hauptreihenabzweig- und Unterriesensternen für mehrere öffentliche spektroskopische Durchmusterungen. Wir validieren unsere Ergebnisse, indem wir lineare Abhängigkeiten zwischen den chemischen Häufigkeiten und der Zeit untersuchen, da die 𝛼- und Neutroneneinfang-Elemente empfindlich auf das Alter reagieren, was auf die unterschiedlichen Zeitskalen der Anreicherung dieser Elemente zurückzuführen ist. Zur weiteren Untersuchung der Scheiben in der Sonnenumgebung verwenden wir einen nicht überwachten Algorithmus für maschinelles Lernen, um eine mehrdimensionale Trennung der chrono-chemischen Sterngruppen vorzunehmen. Dies macht die chemisch dicke Scheibe, die dünne Scheibe und junge 𝛼 Sterne erkennbar. Es zeigt sich, dass die dicke Scheibe eine geringe Altersstreuung aufweist, was auf ihre schnelle Entstehung hindeutet, während die dünne Scheibe eine große Altersspanne abdeckt. Mit bahnbrechenden Daten liefert diese Arbeit ein detailliertes chemodynamisches Bild der Scheibe und des Bulge der Galaxis. Unsere Erkenntnisse über die Milchstraße können mit der Entwicklung von Scheibengalaxien mit hoher Rotverschiebung in Verbindung gebracht werden und so zur Lösung des Rätsels der Galaxienbildung beitragen. KW - stars: distances KW - fundamental parameters KW - statistics KW - galaxy: general KW - disc KW - bulge KW - stellar content KW - Bulge KW - Scheibe KW - fundamentale Parameter KW - Galaxie: allgemein KW - Sterne: Entfernungen KW - Statistik KW - stellarer Inhalt Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-590615 ER - TY - THES A1 - Werhahn, Maria T1 - Simulating galaxy evolution with cosmic rays: the multi-frequency view T1 - Galaxienentwicklung in Simulationen mit komischer Strahlung und deren Strahlungsprozessen N2 - Cosmic rays (CRs) constitute an important component of the interstellar medium (ISM) of galaxies and are thought to play an essential role in governing their evolution. In particular, they are able to impact the dynamics of a galaxy by driving galactic outflows or heating the ISM and thereby affecting the efficiency of star-formation. Hence, in order to understand galaxy formation and evolution, we need to accurately model this non-thermal constituent of the ISM. But except in our local environment within the Milky Way, we do not have the ability to measure CRs directly in other galaxies. However, there are many ways to indirectly observe CRs via the radiation they emit due to their interaction with magnetic and interstellar radiation fields as well as with the ISM. In this work, I develop a numerical framework to calculate the spectral distribution of CRs in simulations of isolated galaxies where a steady-state between injection and cooling is assumed. Furthermore, I calculate the non-thermal emission processes arising from the modelled CR proton and electron spectra ranging from radio wavelengths up to the very high-energy gamma-ray regime. I apply this code to a number of high-resolution magneto-hydrodynamical (MHD) simulations of isolated galaxies, where CRs are included. This allows me to study their CR spectra and compare them to observations of the CR proton and electron spectra by the Voyager-1 satellite and the AMS-02 instrument in order to reveal the origin of the measured spectral features. Furthermore, I provide detailed emission maps, luminosities and spectra of the non-thermal emission from our simulated galaxies that range from dwarfs to Milk-Way analogues to starburst galaxies at different evolutionary stages. I successfully reproduce the observed relations between the radio and gamma-ray luminosities with the far-infrared (FIR) emission of star-forming (SF) galaxies, respectively, where the latter is a good tracer of the star-formation rate. I find that highly SF galaxies are close to the limit where their CR population would lose all of their energy due to the emission of radiation, whereas CRs tend to escape low SF galaxies more quickly. On top of that, I investigate the properties of CR transport that are needed in order to match the observed gamma-ray spectra. Furthermore, I uncover the underlying processes that enable the FIR-radio correlation (FRC) to be maintained even in starburst galaxies and find that thermal free-free-emission naturally explains the observed radio spectra in SF galaxies like M82 and NGC 253 thus solving the riddle of flat radio spectra that have been proposed to contradict the observed tight FRC. Lastly, I scrutinise the steady-state modelling of the CR proton component by investigating for the first time the influence of spectrally resolved CR transport in MHD simulations on the hadronic gamma-ray emission of SF galaxies revealing new insights into the observational signatures of CR transport both spectrally and spatially. N2 - Kosmische Strahlung (CR) ist ein essentieller Bestandteil des interstellaren Mediums (ISM) von Galaxien und spielt eine wichtige Rolle in deren Entwicklung. Insbesondere ist sie in der Lage, die Dynamik einer Galaxie zu beeinflussen, indem sie galaktische Ausflüsse treibt oder das ISM aufheizt und sich dadurch auf die Effizienz der Sternentstehung auswirkt. Um Galaxienentstehung zu verstehen ist es daher notwendig, diesen nicht-thermischen Bestandteil des ISM genau zu modellieren. Aber außerhalb unserer lokalen Umgebung innerhalb der Milchstraße haben wir keine Möglichkeit, um CRs in anderen Galaxien direkt zu messen. Allerdings gibt es viele Möglichkeiten, CRs indirekt über die Strahlung zu beobachten, die sie auf Grund ihrer Interaktion mit Magnetfeldern und interstellarer Strahlung sowie mit dem ISM emittieren. In dieser Arbeit habe ich einen numerischen Code entwickelt, der die spektrale Verteilung der CRs in Simulationen von isolierten Galaxien berechnet, wobei ein stationäres Verhältnis zwischen Injektion und Kühlen angenommen wird. Des Weiteren berechnet er die nicht-thermischen Strahlungsprozesse, die aus den modellierten CR Protonen- und Elektronenspektren hervorgehen. Diese reichen von Radiowellenlängen bis hin zu hochenergetischer Gammastrahlung. Ich wende diesen Code auf eine Vielzahl von hoch aufgelösten, magneto-hydrodynamischen Simulationen von isolierten Galaxien an, die CRs beinhalten. Das ermöglicht es mir, ihre CR Spektren zu untersuchen und mit Beobachtungen des Voyager-1 Satelliten sowie des AMS-02 Instruments von CR Protonen- und Elektronenspektren zu vergleichen, um dem Ursprung von den gemessenen spektralen Besonderheiten nachzugehen. Außerdem lege ich detaillierte Emissionskarten, Leuchtkräfte und Spektren der nicht-thermischen Strahlung unserer simulierten Galaxien vor, die von Zwerggalaxien über Milchstraßen-ähnliche Galaxien bis hin zu Starburst-Galaxien bei verschiedensten Entwicklungsstadien reichen. Damit kann ich erfolgreich die beobachteten Zusammenhänge zwischen jeweils der Radio- und Gammastrahlungsleuchtkraft mit der Ferninfrarot (FIR) Strahlung der sternbildenden Galaxien reproduzieren, wobei die FIR Strahlung ein guter Indikator für die Rate der Sternentstehung ist. Dabei finde ich heraus, dass Galaxien mit einer hohen Rate an Sternentstehung sehr nah an dem Limit sind, in dem ihre CR Population all ihre Energie an die Produktion von Strahlung verlieren würde, während CRs dazu tendieren, Galaxien mit einer niedrigen Sternentstehungsrate schneller zu verlassen. Zusätzlich untersuche ich die Eigenschaften des Transports von CRs, die benötigt werden, um die beobachteten Spektren der Gammastrahlung zu reproduzieren. Außerdem decke ich die zugrundeliegenden physikalischen Prozesse auf, durch die die Korrelation zwischen der FIR- und Radioleuchtkraft auch in Starburst-Galaxien aufrecht erhalten werden kann und finde heraus, dass die thermische Emission natürlicherweise die beobachteten Radiospektren in Galaxien wie M82 und NGC 253 erklärt, wodurch sich das Rätsel der flachen Radiospektren löst, die scheinbar im Widerspruch zum beobachteten engen Zusammenhang zwischen der FIR- und Radioleuchtkraft standen. Zuletzt hinterfrage ich die Annahme eines stationären Zustandes bei der Modellierung der CR Protonenspektren, indem ich zum ersten Mal den Einfluss von spektral aufgelöstem Transport von CR Protonen in magneto-hydrodynamischen Simulationen auf die hadronische Gammastrahlung von sternbildenden Galaxien untersuche, was neue Einblicke in beobachtbare Signaturen, sowohl spektral als auch räumlich, von CR-Transport ermöglicht. KW - galaxies KW - cosmic rays KW - numerical astrophysics KW - kosmische Strahlung KW - Galaxien KW - numerische Astrophysik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-572851 ER - TY - JOUR A1 - Mattern, Maximilian A1 - Pudell, Jan-Etienne A1 - Dumesnil, Karine A1 - von Reppert, Alexander A1 - Bargheer, Matias T1 - Towards shaping picosecond strain pulses via magnetostrictive transducers JF - Photoacoustics N2 - Using time-resolved x-ray diffraction, we demonstrate the manipulation of the picosecond strain response of a metallic heterostructure consisting of a dysprosium (Dy) transducer and a niobium (Nb) detection layer by an external magnetic field. We utilize the first-order ferromagnetic–antiferromagnetic phase transition of the Dy layer, which provides an additional large contractive stress upon laser excitation compared to its zerofield response. This enhances the laser-induced contraction of the transducer and changes the shape of the picosecond strain pulses driven in Dy and detected within the buried Nb layer. Based on our experiment with rare-earth metals we discuss required properties for functional transducers, which may allow for novel field-control of the emitted picosecond strain pulses. KW - picosecond ultrasonics KW - magnetostriction KW - ultrafast x-ray diffraction KW - ultrafast photoacoustics KW - nanoscale heat transfer KW - negative thermal expansion Y1 - 2023 U6 - https://doi.org/10.1016/j.pacs.2023.100463 SN - 2213-5979 VL - 30 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Kruse, Marlen T1 - Characterization of biomolecules and their interactions using electrically controllable DNA nanolevers N2 - In this work, binding interactions between biomolecules were analyzed by a technique that is based on electrically controllable DNA nanolevers. The technique was applied to virus-receptor interactions for the first time. As receptors, primarily peptides on DNA nanostructures and antibodies were utilized. The DNA nanostructures were integrated into the measurement technique and enabled the presentation of the peptides in a controllable geometrical order. The number of peptides could be varied to be compatible to the binding sites of the viral surface proteins. Influenza A virus served as a model system, on which the general measurability was demonstrated. Variations of the receptor peptide, the surface ligand density, the measurement temperature and the virus subtypes showed the sensitivity and applicability of the technology. Additionally, the immobilization of virus particles enabled the measurement of differences in oligovalent binding of DNA-peptide nanostructures to the viral proteins in their native environment. When the coronavirus pandemic broke out in 2020, work on binding interactions of a peptide from the hACE2 receptor and the spike protein of the SARS-CoV-2 virus revealed that oligovalent binding can be quantified in the switchSENSE technology. It could also be shown that small changes in the amino acid sequence of the spike protein resulted in complete loss of binding. Interactions of the peptide and inactivated virus material as well as pseudo virus particles could be measured. Additionally, the switchSENSE technology was utilized to rank six antibodies for their binding affinity towards the nucleocapsid protein of SARS-CoV-2 for the development of a rapid antigen test device. The technique was furthermore employed to show binding of a non-enveloped virus (adenovirus) and a virus-like particle (norovirus-like particle) to antibodies. Apart from binding interactions, the use of DNA origami levers with a length of around 50 nm enabled the switching of virus material. This proved that the technology is also able to size objects with a hydrodynamic diameter larger than 14 nm. A theoretical work on diffusion and reaction-limited binding interactions revealed that the technique and the chosen parameters enable the determination of binding rate constants in the reaction-limited regime. Overall, the applicability of the switchSENSE technique to virus-receptor binding interactions could be demonstrated on multiple examples. While there are challenges that remain, the setup enables the determination of affinities between viruses and receptors in their native environment. Especially the possibilities regarding the quantification of oligo- and multivalent binding interactions could be presented. N2 - In dieser Arbeit wurden Bindungsinteraktionen zwischen biologischen Molekülen mit Hilfe von elektrisch kontrollierbaren DNA-Nanohebeln untersucht. Die Technologie wurde zum ersten Mal auf Virus-Rezeptor Interaktionen angewendet. Als Rezeptoren wurden überwiegend Peptide und Antikörper untersucht. Die Peptide wurden auf vierarmigen DNA-Nanohebeln angeordnet. Ihre geometrische Anordnung entsprach der Anordnung der Rezeptorbindungsstellen der Proteine auf der Virusoberfläche. An Influenza A Viren wurde die Machbarkeit der Bindungsmessung zuerst demonstriert. Dabei konnte die Anwendbarkeit und Sensitivität der Technologie durch Variation der Peptide, der Ligandendichte auf der Sensoroberfläche, der Messtemperatur und der Virussubtypen gezeigt werden. Weiterhin wurde Virusmaterial auf der Sensoroberfläche immobilisiert und anschließend wurden quantitative Bindungsmessungen mit den oligovalenten DNA-Peptid-Strukturen durchgeführt. Dieser Versuchsaufbau ermöglichte die Messung der Bindungsstärke in Abhängigkeit der Anzahl der pro DNA-Struktur gekoppelten Peptide. Im Zuge des Ausbruchs der Coronavirus-Pandemie im Jahr 2020 wurden Bindungsinteraktionsmessungen zwischen einem Peptid aus dem hACE2-Rezeptor und SARS-CoV-2 Spike Proteinen durchgeführt. Auch hier konnten oligovalente Bindungseffekte quantifiziert werden. Außerdem wurde festgestellt, dass Veränderungen an der Aminosäuresequenz des SARS-CoV-2 Proteins starke Auswirkungen auf das Bindungsverhalten hatten. Auch Interaktionen zwischen dem Peptid und sowohl inaktiviertem Virusmaterial als auch Pseudoviruspartikeln wurden gemessen. Für die Entwicklung eines Antigenschnelltests wurden die Affinitäten von sechs Antikörpern an das Nucleocapsidprotein des SARS-CoV-2 bestimmt. Weiterhin konnte gezeigt werden, dass mit der Technologie auch die Bindung von unbehüllten Viren (am Beispiel von Adenoviren) und Virus-ähnlichen Partikeln (am Beispiel von Norovirus-ähnlichen Partikeln) an Antikörper vermessen werden kann. Neben Bindungsinteraktionen, wurden auch Größenbestimmungen mit Hilfe von DNA Origamis durchgeführt. Die Hebellänge von ca. 50 nm ermöglichte die elektrische Bewegung ("switching") von Virusmaterial. Es konnte so gezeigt werden, dass die Technologie es ermöglicht, Objekte mit einem hydrodynamischen Durchmesser von mehr als 14 nm zu bewegen. In einer theoretischen Betrachtung der Experimente konnte gezeigt werden, dass der Sensoraufbau und die verwendeten Parameter die Messung von Bindungsratenkonstanten in einem Reaktions-limitierten Bereich ermöglichen. Insgesamt konnte die Arbeit an vielen Beispielen zeigen, dass die switch-SENSE Technologie für die Messung von Virus-Rezeptor Interaktionen geeignet ist. Während es weiterhin Herausforderungen gibt, so ermöglicht der Aufbau doch die Bestimmung von Affinitäten zwischen Viren und Rezeptoren. Insbesondere die Möglichkeiten zur Quantifizierung von oligo- und multivalenten Bindungsinteraktionen konnten aufgezeigt werden. T2 - Charakterisierung von Biomolekülen und deren Interaktionen mittels elektrisch kontrollierbarer DNA Nanohebel KW - biomolecule KW - binding interactions KW - switchSENSE KW - virus KW - receptor KW - Biomoleküle KW - Bindungsinteraktion KW - switchSENSE Technologie KW - Virus KW - Rezeptor Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-577384 ER - TY - GEN A1 - Mattern, Maximilian A1 - Pudell, Jan-Etienne A1 - Dumesnil, Karine A1 - von Reppert, Alexander A1 - Bargheer, Matias T1 - Towards shaping picosecond strain pulses via magnetostrictive transducers T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Using time-resolved x-ray diffraction, we demonstrate the manipulation of the picosecond strain response of a metallic heterostructure consisting of a dysprosium (Dy) transducer and a niobium (Nb) detection layer by an external magnetic field. We utilize the first-order ferromagnetic–antiferromagnetic phase transition of the Dy layer, which provides an additional large contractive stress upon laser excitation compared to its zerofield response. This enhances the laser-induced contraction of the transducer and changes the shape of the picosecond strain pulses driven in Dy and detected within the buried Nb layer. Based on our experiment with rare-earth metals we discuss required properties for functional transducers, which may allow for novel field-control of the emitted picosecond strain pulses. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1321 KW - picosecond ultrasonics KW - magnetostriction KW - ultrafast x-ray diffraction KW - ultrafast photoacoustics KW - nanoscale heat transfer KW - negative thermal expansion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-588868 SN - 1866-8372 IS - 1321 ER - TY - THES A1 - Valade, Aurelien Niels Valentin T1 - Unveiling the Local Universe Y1 - 2023 ER - TY - GEN A1 - Regenstein, Wolfgang T1 - Optische Spektroskopie dünner organischer Schichten in Stichpunkten T1 - Optical spectroscopy of thin organic layers in bullet points N2 - Es wird ein Überblick über verschiedene spektroskopische Techniken, mit denen dünne organische Schichten, wie sie in der Fotovoltaik, bei Leuchtdioden oder organischen Halbleitern Anwendung finden, gegeben. Mit einfachen Zusatzgeräten lassen sich Schichtdicke, Schichtaufbau und Zusammensetzung untersuchen. Die Schichtdicke kann monomolekular sein. Unter bestimmten Voraussetzungen sind einzelne Moleküle in einer Schicht charakterisierbar. N2 - An overview of various spectroscopic techniques with thin organic layers, such as those used in photovoltaics, light emitting diodes or find organic semiconductors application given. Layer thickness, layer structure and composition can be examined with simple additional equipment. The layer thickness can be monomolecular. Under certain conditions, individual molecules in a layer can be characterized. KW - dünne organische Schichten KW - thin organic layers KW - Techniken der optischen Spektroskopie: IR-Absorption KW - techniques of optical spectroscopy: IR absorption KW - Fluoreszenz KW - fluorescence KW - RAMAN-Spektroskopie KW - RAMAN spectroscopy KW - Einzelmolekülspektroskopie KW - individual molecules spectroscopy Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-608135 ER - TY - THES A1 - Hantschmann, Markus T1 - Stimulated resonant inelastic X-ray scattering in transition metal systems T1 - Resonante Inelastische Röntgenstreuung in Übergangsmetall-Komplexen N2 - With the implementation of intense, short pulsed light sources throughout the last years, the powerful technique of resonant inelastic X-ray scattering (RIXS) became feasible for a wide range of experiments within femtosecond dynamics in correlated materials and molecules. In this thesis I investigate the potential to bring RIXS into the fluence regime of nonlinear X-ray-matter interactions, especially focusing on the impact of stimulated scattering on RIXS in transition metal systems in a transmission spectroscopy geometry around transition metal L-edges. After presenting the RIXS toolbox and the capabilities of free electron laser light sources for ultrafast intense X-ray experiments, the thesis explores an experiment designed to understand the impact of stimulated scattering on diffraction and direct beam transmission spectroscopy on a CoPd multilayer system. The experiments require short X-ray pulses that can only be generated at free electron lasers (FEL). Here the pulses are not only short, but also very intense, which opens the door to nonlinear X-ray-matter interactions. In the second part of this thesis, we investigate observations in the nonlinear interaction regime, look at potential difficulties for classic spectroscopy and investigate possibilities to enhance the RIXS through stimulated scattering. Here, a study on stimulated RIXS is presented, where we investigate the light field intensity dependent CoPd demagnetization in transmission as well as scattering geometry. Thereby we show the first direct observation of stimulated RIXS as well as light field induced nonlinear effects, namely the breakdown of scattering intensity and the increase in sample transmittance. The topic is of ongoing interest and will just increase in relevance as more free electron lasers are planned and the number of experiments at such light sources will continue to increase in the near future. Finally we present a discussion on the accessibility of small DOS shifts in the absorption-band of transition metal complexes through stimulated resonant X-ray scattering. As these shifts occur for example in surface states this finding could expand the experimental selectivity of NEXAFS and RIXS to the detectability of surface states. We show how stimulation can indeed enhance the visibility of DOS shifts through the detection of stimulated spectral shifts and enhancements in this theoretical study. We also forecast the observation of stimulated enhancements in resonant excitation experiments at FEL sources in systems with a high density of states just below the Fermi edge and in systems with an occupied to unoccupied DOS ratio in the valence band above 1. N2 - In dieser Arbeit wird die Weiterentwicklung der Technik ’Resonante Inelastische Röntgenstreuung’ (RIXS) thematisiert. Vor allem wird das Thema der nichtlinearen Röntgen-Materie-Wechselwirkung an Freien Elektronenlasern wird ausführlich diskutiert. Mit der Etablierung von intensiven kurzpulsigen Röntgenquellen auf Basis von freien Elektronenlasern, ist die Möglichkeit entstanden, zeitaufgelöste Experimente im Femtosekundenbereich mit Röntgenstrahlung durchzuführen. Die dort erzeugten Pulse sind so intensiv und kurz, dass neue Effekte, die analogien in der nichtlinearen Optik haben, auftreten können. Diese neu auftretenden Effekte sind für die Röntgengemeinschaft vollkommen neu und müssen verstanden werden um freie Elektronenlaser sinnvoll auf größerer Skala, sinnvoll nutzen zu können. Außerdem könnten diese Effekte auch ganz neue experimentelle Möglichkeiten eröffnen. Deswegen beschäftigt sich diese Arbeit vor allem mit der potentiellen Möglichkeit, die RIXS Technik im nicht-linearen Licht-Materie Wechselwirkungsbereich zu bringen, die geänderten Interaktionen zu verstehen und vielleicht sogar nutzbar zu machen. Zu Beginn werden die Möglichkeiten der RIXS Technik vorgestellt. Im Anschluss wird ein von uns in Kollaboration mit dem SLAC entwickeltes und durchgeführtes Experiment vorgestellt, welches unter anderem die erste direkte Beobachtung von stimulierter resonanter inelastischer Röntgenbeugung an dünnen CoPd Multischichtsystemen ermöglicht hat. Außerdem sind intensitätsabhängige Veränderungen der Licht-Materie Wechselwirkung beobachtet worden. Speziell konnten wir einen klaren Zusammenhang zwischen dem Zusammenbruch von Streuintensität (entspricht etwa der Intensit¨ at, die nicht in direkter Strahlrichtung abgestrahlt wird) und der Vergrößerung der Transmittivität (Intensität, die in Strahlrichtung durch die Probe propagiert) feststellen. Dies konnte mit der Verschiebung von Auger und Streueffekten zu stimulierten Effekten verknüpft werden. Um das Experiment besser zu verstehen wurde ein Ratengleichungsmodell entwickelt, das intensitätsabhängige Wirkungsquerschnitte inkludiert und damit intensitätsabhängige Puls-induzierte Effekte abschätzen kann. Es konnte gezeigt werden wie die Intensitätsabhängikeit von Puls-Induzierter Transparenz, Puls-induziertem zusammenbruch der Röntgenstreuung, und die Verstärkung von Teilen des Pulses mit stimulierten Emissionen verknüpft sind. Außerdem konnten einige Aspekte identifiziert werden, die dabei helfen können um neue Experimente zu designen, die in der Lage wären durch das Ausnutzen von stimulierter Emission und damit verbundenen Spektralen verschiebungen zusätzliche Informationen aus den zu untersuchenden Systemen zu gewinnen, wie zum Beispiel über die elektronische Zustandsdichte in einer Oberflächen- oder Interface-Schicht. KW - RIXS KW - free electron laser KW - transition metal systems KW - rate equation KW - RIXS KW - resonante inelastische Röntgenstreuung KW - Freie Elektronen Laser KW - Übergangsmetall - Komplexe Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-584761 ER - TY - THES A1 - Magkos, Sotirios T1 - Iterative reconstruction from under-sampled Computed Tomography data T1 - Iterative Rekonstruktion aus unterabgetasteten Computertomographiedaten N2 - In X-ray computed tomography (XCT), an X-ray beam of intensity I0 is transmitted through an object and its attenuated intensity I is measured when it exits the object. The attenuation of the beam depends on the attenuation coefficients along its path. The attenuation coefficients provide information about the structure and composition of the object and can be determined through mathematical operations that are referred to as reconstruction. The standard reconstruction algorithms are based on the filtered backprojection (FBP) of the measured data. While these algorithms are fast and relatively simple, they do not always succeed in computing a precise reconstruction, especially from under-sampled data. Alternatively, an image or volume can be reconstructed by solving a system of linear equations. Typically, the system of equations is too large to be solved but its solution can be approximated by iterative methods, such as the Simultaneous Iterative Reconstruction Technique (SIRT) and the Conjugate Gradient Least Squares (CGLS). This dissertation focuses on the development of a novel iterative algorithm, the Direct Iterative Reconstruction of Computed Tomography Trajectories (DIRECTT). After its reconstruction principle is explained, its performance is assessed for real parallel- and cone-beam CT (including under-sampled) data and compared to that of other established algorithms. Finally, it is demonstrated how the shape of the measured object can be modelled into DIRECTT to achieve even better reconstruction results. N2 - Bei der Röntgen-Computertomographie (XCT) wird ein Röntgenstrahl der Intensität I0 durch ein Objekt gesendet und seine geschwächte Intensität I hinter dem Objekt gemessen. Die Schwächung des Strahls hängt von den Abschwächungskoeffizienten entlang seines Weges innerhald des Objekts ab. Die Schwächungskoeffizienten liefern Informationen uber die Struktur und Zusammensetzung des Objekts und können durch mathematische Operationen, die als Rekonstruktion bezeichnet werden, bestimmt werden. Die Standard-Rekonstruktionsalgorithmen basieren auf der gefilterten Rückprojektion (FBP) der Messdaten. Diese Algorithmen sind zwar schnell und relativ einfach, doch gelingt es ihnen nicht immer, eine präzise Rekonstruktion zu berechnen, vor allem bei unzureichend abgetasteten Daten. Alternativ kann ein Bild oder ein Volumen auch durch die Lösung eines Systems linearer Gleichungen rekonstruiert werden. In der Regel ist das Gleichungssystem zu groß, um gelöst zu werden, aber seine Lösung kann durch iterative Methoden angenähert werden, wie die Simultaneous Iterative Reconstruction Technique (SIRT) und die Conjugate Gradient Least Squares (CGLS). Im Mittelpunkt dieser Dissertation steht die Entwicklung eines neuartigen iterativen Algorithmus, des Direct Iterative Reconstruction of Computed Tomography Trajectories (DIRECTT). Nach der Erläuterung seines Rekonstruktionsprinzips wird seine Leistung für reale Parallel- und Kegelstrahl-CT-Daten (einschließlich unterabgetasteter Daten) bewertet und mit Rekonstruktionen anderer etablierter Algorithmen verglichen. Schließlich wird gezeigt, wie die Form des gemessenen Objekts in DIRECTT modelliert werden kann, um noch bessere Rekonstruktionsergebnisse zu erzielen. KW - Computed Tomography KW - X-rays KW - Iterative reconstruction KW - Computertomographie KW - Röntgenstrahlung KW - iterative Rekonstruktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-572789 ER - TY - THES A1 - Sajedi, Maryam T1 - Investigation of metal-halide-perovskites by state-of-the-art synchrotron-radiation methods T1 - Untersuchung von Metallhalogenid-Perowskiten mit modernsten Synchrotronstrahlungsmethoden N2 - My thesis chiefly aims to shed light on the favourable properties of LHP semiconductors from the point of view of their electronic structure. Currently, various hypotheses are circulating to explain the exceptionally favourable transport properties of LHPs. Seeking an explanation for the low non-radiative recombination rates and long carrier lifetimes is particularly interesting to the halide perovskites research community. The first part of this work investigates the two main hypotheses that are believed to play a significant role: the existence of a giant Rashba effect and large polarons. The experimental method of ARPES is mainly applied to verify their credibility. The first hypothesis presumes that a giant Rashba effect restricts the recombination losses of the charge carriers by making the band gap slightly indirect. The Rashba effect is based on a strong SOC that could appear in LHPs thanks to incorporating the heavy element Pb in their structure. Earlier experimental work had pointed out this effect at the VBM of a hybrid LHP as a viable explanation for the long lifetimes of the charge carriers. My systematic ARPES studies on hybrid MAPbBr3 and spin-resolved ARPES studies on the inorganic CsPbBr3 disprove the presence of any Rashba effect in the VBM of the reported order of magnitude. Therefore, neither the spin texture nor an indirect band gap character at the VBM in the bulk or at the surface can explain the high efficiency of LHP. In case of existence, this effect is in terms of the Rashba parameter at least a factor of a hundred smaller than previously assumed. The second hypothesis proposes large polaron formation in the electronic structure of LHPs and attributes it to their high defect tolerance and low non-radiative recombination rate. Because the perovskite structure consists of negative and positive ions, polarons of this kind can be expected due to the Coulomb interaction between carriers and the polar lattice at intermediate electron-phonon coupling strength. Their existence is proposed to screen the carriers and defects to avoid recombination and trapping, thus leading to long carrier lifetimes. ARPES results by one group supported this assumption, reporting a 50% effective mass enhancement over the theoretical effective mass for CsPbBr3 in the orthorhombic structure. The current thesis examines this hypothesis experimentally by photon-energy-dependent ARPES spectra and theoretically by GW band calculations of CsPbBr3 perovskites. The investigation is based on the fact that a polaron contribution in charge transport can become evident by an increase of the effective mass as measured by ARPES over the calculated one without polaron effects. However, my experiments on crystalline CsPbBr3 did not imply a larger effective mass for which one could postulate large polarons. In fact, the effective masses determined from ARPES agree with that of theoretical predictions. The second part of my thesis thoroughly investigates the possibility of spontaneously magnetizing LHPs by introducing Mn2+ ions. Mn doping was reported to cause ferromagnetism in one of the most common LHPs, MAPbI3, mediated by super-exchange. The current work investigates the magnetic properties of a wide concentration range of Mn-doped MAPbI3 and triple-cation films by XAS, XMCD, and SQUID measurements. Based on the XAS line shape and a sum-rule analysis of the XMCD spectra, a pure Mn2+ configuration has been confirmed. Negative Curie temperatures are extracted from fitting the magnetization with a Curie-Weiss law. However, a remanent magnetization, which would be an indication of the absence of ferromagnetism down to 2K. As far as the double exchange is concerned, the element-specific XAS excludes a sufficient amount of Mn3+ as a prerequisite for this mechanism. All the findings show no evidence of significant double exchange or ferromagnetism in Mn-doped LHPs. The magnetic behavior is paramagnetic rather than ferromagnetic. In the dissertation's last chapter, orthorhombic features of CsPbBr3 are revealed by ARPES, including an extra VBM at the Γ-point. The VBM of CsPbBr3 shows a temperature-dependent splitting, which decreases by 190 meV between 38K and 300K and tracks a shift of a saddle point at the cubic M-point. It is possible to reproduce the energy shift using an atomic model with a larger unit cell for room temperature, allowing local inversion symmetry breaking. This indicates the importance of electric dipoles for the inorganic LHPs, which may contribute to their high efficiency by breaking inversion symmetry and a Berry-phase effect. N2 - In meiner Dissertation geht es vor allem darum, die vorteilhaften Eigenschaften von LHP ausgehend von ihrer elektronischen Struktur zu beleuchten. Derzeit kursieren zahlreiche Hypothesen, um die außergewöhnlich guten Transporteigenschaften von LHPs zu erklären. Die Suche nach einer Erklärung für die niedrigen strahlungslosen Rekombinationsraten und die langen Ladungsträgerlebensdauern ist von besonderem Interesse für die Forschercommunity der Halogenidperowskite. Der erste Teil dieser Arbeit untersucht die beiden Haupthypothesen, von denen angenommen wird, dass sie eine wichtige Rolle spielen: die Existenz eines riesigen Rashba-Effekts und großer Polaronen. Hier wird hauptsächlich die experimentelle Methode der ARPES angewandt, um ihre Glaubwürdigkeit zu überprüfen. Die erste Hypothese geht davon aus, dass ein riesiger Rashba-Effekt die Rekombinationsverluste der Ladungsträger einschränkt, indem er die Bandlücke leicht indirekt macht. Der Rashba-Effekt basiert auf einer starken Spin-Bahn-Wechselwirkung, die in LHPs, dank der Präsenz des schweren Elements Pb in ihrer Struktur, potenziell auftreten könnte. Eine frühere experimentelle Arbeit hatte diesen Effekt am VBM eines hybriden LHP als mögliche Erklärung für die langen Lebensdauern der Ladungsträger vorgeschlagen. Meine systematischen ARPES-Studien am hybriden MAPbBr3 sowie die winkel- und spinaufgelösten ARPES-Studien am anorganischen CsPbBr3 widerlegen das Vorhandensein eines riesigen Rashba-Effekts im VBM in der angegebenen Größenordnung. Daher können weder die Spin-Textur noch der indirekte Bandlückencharakter am VBM im Volumen oder an der Oberfläche die hohe Effizienz von LHP erklären. Dieser Effekt ist, falls er existiert, mindestens um einen Faktor hundert kleiner als bisher angenommen. Die zweite Hypothese geht von der Bildung großer Polaronen in der elektronischen Struktur von LHPs aus, welche zu ihrer hohen Defekttoleranz und niedrigen strahlungslosen Rekombination srate beitragen soll. Da die Perowskit Struktur aus negativen und positiven Ionen besteht, sind solche Polaronen wegen der Coulomb-Wechselwirkung zwischen Ladungsträger und Ionengitter bei mittlerer Stärke der Elektron-Phonon-Kopplung zu erwarten. Es wird angenommen, dass sie die Ladungsträger und Defekte abschirmen, was Rekombination und Trapping verhindert und zu langen Ladungsträgerlebensdauern führt. Die ARPES-Ergebnisse einer Gruppe stützen diese Annahme und zeigen, dass die effektive Masse von CsPbBr3 um 50% höher ist als die theoretische effektive Masse für die orthorhombische Phase. In der vorliegenden Arbeit wird diese Hypothese experimentell mit Hilfe von Photonenenergie-abhängigen ARPES-Spektren und theoretisch mit Hilfe von GW-Bandstrukturberechnungen an CsPbBr3-Perowskiten untersucht. Denn der Beitrag von Polaronen zum Ladungstransport lässt sich durch eine Zunahme der mit ARPES gemessenen effektiven-Masse nachweisen. Meine Experimente an kristallinem CsPbBr3 ergaben jedoch keine erhöhte effektive Masse, für die man große Polaronen postulieren könnte. Tatsächlich stimmen die aus ARPES ermittelten effektiven Massen gut mit den theoretischen Vorhersagen überein. Der zweite Teil meiner Dissertation untersucht die Möglichkeit, LHPs durch den Einbau von Mn2+ Ionen spontan zu magnetisieren. Es wurde berichtet, dass die Mn-Dotierung in einem der häufigsten LHPs - \MAPbI3 - Ferromagnetismus durch "Superaustausch" hervorruft. Außerdem berichteten zwei weitere Arbeiten über Ferromagnetismus sogar bei Raumtemperatur, hervorgerufen jedoch durch Doppalaustausch. In der vorliegenden Arbeit werden die magnetischen Eigenschaften eines weiten Konzentrationsbereichs von Mn-dotiertem MAPbI3 und Dreifachkation-Filmen mittels XAS, XMCD und SQUID-Messungen untersucht. Basierend auf der XAS-Linienform und der Summenregelanalyse der XMCD-Spektren wurde eine reine Mn2+ Konfiguration bestätigt. Negative Curie-Temperaturen werden aus einem Fit der Magnetisierung mit dem Curie-Weiss-Gesetz abgeleitet. Eine remanente Magnetisierung, die auf Ferromagnetismus hindeuten würde, wird jedoch bis hinunter zu 2K nicht beobachtet. Was den Doppelaustausch betrifft, so schließt die elementspezifische XAS eine ausreichende Menge an Mn3+ als Voraussetzung für diesen Mechanismus aus. Nach all diesen Erkenntnissen gibt es keinen Hinweis auf einen signifikanten Doppelaustausch oder Ferromagnetismus in Mn-dotierten LHP. Das magnetische Verhalten ist eher paramagnetisch als ferromagnetisch. Im letzten Kapitel der Dissertation werden orthorhombische ARPES-Strukturen bei CsPbBr3 beobachtet, einschließlich eines zusätzlichen VBM am Γ-Punkt. Das VBM von CsPbBr3 zeigt eine temperaturabhängige Aufspaltung, die zwischen 38K und 300 K um 190 meV abnimmt und von einer Verschiebung eines Sattelpunktes am kubischen M-Punkt stammt. Es ist möglich, die Energieverschiebung mit atomaren Model mit größerer Einzeitszelle für Raumtemperatur, eine Brechung der lokalen Inversionssymmetrie zulässt, zu reproduzieren. Dies deutet auf die Bedeutung elektrischer Dipole für anorganische LHP hin, die zu ihrer hohen Effizienz durch Brechung der Inversionssymmetrie und einen Berry-Phasen-Effekt beitragen könnten. KW - lead halide perovskites (LHP) KW - valence band (VB) KW - valence band maximum (VBM) KW - Brillouin zone (BZ) KW - surface Brillouin zone (SBZ) KW - Spin-orbi coupling (SOC) KW - Brillouin-Zone (BZ) KW - Bleihalogenid-Perowskite (BHP) KW - Oberflächen-Brillouin-Zone (OBZ) KW - Valenzband (VB) KW - Valenzbandmaximum (VBM) KW - Spin-Bahn-Wechselwirkung (SBW) Y1 - 2023 ER - TY - THES A1 - Haseeb, Haider T1 - Charge and heat transport across interfaces in nanostructured porous silicon T1 - Ladungs- und Wärmetransport über Grenzflächen in nanostrukturiertem porösem Silizium N2 - This thesis discusses heat and charge transport phenomena in single-crystalline Silicon penetrated by nanometer-sized pores, known as mesoporous Silicon (pSi). Despite the extensive attention given to it as a thermoelectric material of interest, studies on microscopic thermal and electronic transport beyond its macroscopic characterizations are rarely reported. In contrast, this work reports the interplay of both. PSi samples synthesized by electrochemical anodization display a temperature dependence of specific heat 𝐶𝑝 that deviates from the characteristic 𝑇^3 behaviour (at 𝑇<50𝐾). A thorough analysis reveals that both 3D and 2D Einstein and Debye modes contribute to this specific heat. Additional 2D Einstein modes (~3 𝑚𝑒𝑉) agree reasonably well with the boson peak of SiO2 in pSi pore walls. 2D Debye modes are proposed to account for surface acoustic modes causing a significant deviation from the well-known 𝑇^3 dependence of 𝐶𝑝 at 𝑇<50𝐾. A novel theoretical model gives insights into the thermal conductivity of pSi in terms of porosity and phonon scattering on the nanoscale. The thermal conductivity analysis utilizes the peculiarities of the pSi phonon dispersion probed by the inelastic neutron scattering experiments. A phonon mean-free path of around 10 𝑛𝑚 extracted from the presented model is proposed to cause the reduced thermal conductivity of pSi by two orders of magnitude compared to p-doped bulk Silicon. Detailed analysis indicates that compound averaging may cause a further 10-50% reduction. The percolation threshold of 65% for thermal conductivity of pSi samples is subsequently determined by employing theoretical effective medium models. Temperature-dependent electrical conductivity measurements reveal a thermally activated transport process. A detailed analysis of the activation energy 𝐸𝐴𝜎 in the thermally activated transport exhibits a Meyer Neldel compensation rule between different samples that originates in multi-phonon absorption upon carrier transport. Activation energies 𝐸𝐴𝑆 obtained from temperature-dependent thermopower measurements provide further evidence for multi-phonon assisted hopping between localized states as a dominant charge transport mechanism in pSi, as they systematically differ from the determined 𝐸𝐴𝜎 values. N2 - Diese Dissertation befasst sich mit Wärme- und Ladungstransportphänomenen in mesoporösem Silizium (pSi) oder etwas genauer in einkristallinem Silizium, welches mit nanometergroßen Poren durchsetzt ist. Trotz der großen Aufmerksamkeit, die diesem thermoelektrischen Material zuteil wird, wird nur selten über Studien zum mikroskopischen thermischen und elektronischen Transport jenseits seiner makroskopischen Charakterisierung berichtet. Im Gegensatz dazu wird in dieser Studie das Zusammenspiel von beidem untersucht. PSi-Proben, die durch elektrochemische Anodisierung synthetisiert wurden, zeigen eine Temperaturabhängigkeit der spezifischen Wärme 𝐶𝑝, die vom charakteristischen 𝑇3 Verhalten (bei 𝑇<50𝐾) abweicht. Eine gründliche Analyse zeigt, dass sowohl 3D- als auch 2D-Einstein- und Debye-Moden zu dieser spezifischen Wärme beitragen. Zusätzliche 2D-Einstein-Moden (~3 𝑚𝑒𝑉) stimmen gut mit dem Bosonen-Peak von SiO2 in teilweise oxidierten pSi-Porenwänden überein. 2D-Debye-Moden werden vorgeschlagen, um akustische Oberflächenmoden zu erklären, die eine signifikante Abweichung von der bekannten 𝑇3Abhängigkeit von 𝐶𝑝 bei 𝑇<50𝐾 verursachen. Ein neuartiges theoretisches Modell gibt Einblicke in die Wärmeleitfähigkeit von pSi in Bezug auf Porosität und Phononenstreuung auf der Nanoskala. Die Analyse der Wärmeleitfähigkeit nutzt die Besonderheiten der pSi-Phononendispersion, die durch Experimente mit inelastischer Neutronenstreuung untersucht wurden. Ein mittlerer freier Weg der Phononen von etwa 10 𝑛𝑚, der aus dem vorgestellten Modell extrahiert wurde, wird als Ursache für die um zwei Größenordnungen geringere Wärmeleitfähigkeit von pSi im Vergleich zu p-dotiertem Silizium vorgeschlagen. Eine detaillierte Analyse zeigt, dass die Porosität selbst eine weitere Verringerung der Wärmeleitfähigkeit um 10-50% verursachen kann. Die Perkolationsschwelle von 65 % für die Wärmeleitfähigkeit von pSi-Proben wird anschließend mit Hilfe eines theoretischen Ansatzes für effektive Medien bestimmt. Temperaturabhängige Messungen der elektrischen Leitfähigkeit lassen einen thermisch aktivierten Transportprozess erkennen. Eine detaillierte Analyse der Aktivierungsenergie 𝐸𝐴𝜎 im thermisch aktivierten Transport zeigt eine Meyer-Neldel-Kompensationsregel zwischen verschiedenen Proben, die auf Multiphononenabsorption beim Ladungsträgertransport zurückzuführen ist. Aktivierungsenergien 𝐸𝐴𝑆, die aus temperaturabhängigen Seebeck-Messungen gewonnen wurden, liefern weitere Beweise für Multiphononen-unterstütztes Springen zwischen lokalisierten Zuständen als dominanten Ladungstransportmechanismus in pSi, da sie sich systematisch von den ermittelten 𝐸𝐴𝜎 Werten unterscheiden. KW - mesoporous KW - silicon KW - Meyer-Neldel-rule KW - nanomaterials KW - Meyer-Neldel-Regel KW - mesoporös KW - Nanomaterialien KW - Silizium Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-611224 ER - TY - THES A1 - Voroshnin, Vladimir T1 - Control over spin and electronic structure of MoS₂ monolayer via interactions with substrates T1 - Kontrolle der Spin- und elektronischen Strukturen von MoS₂-Monolagen durch Wechselwirkungen mit Substraten N2 - The molybdenum disulfide (MoS2) monolayer is a semiconductor with a direct bandgap while it is a robust and affordable material. It is a candidate for applications in optoelectronics and field-effect transistors. MoS2 features a strong spin-orbit coupling which makes its spin structure promising for acquiring the Kane-Mele topological concept with corresponding applications in spintronics and valleytronics. From the optical point of view, the MoS2 monolayer features two valleys in the regions of K and K' points. These valleys are differentiated by opposite spins and a related valley-selective circular dichroism. In this study we aim to manipulate the MoS2 monolayer spin structure in the vicinity of the K and K' points to explore the possibility of getting control over the optical and electronic properties. We focus on two different substrates to demonstrate two distinct routes: a gold substrate to introduce a Rashba effect and a graphene/cobalt substrate to introduce a magnetic proximity effect in MoS2. The Rashba effect is proportional to the out-of-plane projection of the electric field gradient. Such a strong change of the electric field occurs at the surfaces of a high atomic number materials and effectively influence conduction electrons as an in-plane magnetic field. A molybdenum and a sulfur are relatively light atoms, thus, similar to many other 2D materials, intrinsic Rashba effect in MoS2 monolayer is vanishing small. However, proximity of a high atomic number substrate may enhance Rashba effect in a 2D material as it was demonstrated for graphene previously. Another way to modify the spin structure is to apply an external magnetic field of high magnitude (several Tesla), and cause a Zeeman splitting, the conduction electrons. However, a similar effect can be reached via magnetic proximity which allows us to reduce external magnetic fields significantly or even to zero. The graphene on cobalt interface is ferromagnetic and stable for MoS2 monolayer synthesis. Cobalt is not the strongest magnet; therefore, stronger magnets may lead to more significant results. Nowadays most experimental studies on the dichalcogenides (MoS2 included) are performed on encapsulated heterostructures that are produced by mechanical exfoliation. While mechanical exfoliation (or scotch-tape method) allows to produce a huge variety of structures, the shape and the size of the samples as well as distance between layers in heterostructures are impossible to control reproducibly. In our study we used molecular beam epitaxy (MBE) methods to synthesise both MoS2/Au(111) and MoS2/graphene/Co systems. We chose to use MBE, as it is a scalable and reproducible approach, so later industry may adapt it and take over. We used graphene/cobalt instead of just a cobalt substrate because direct contact of MoS2\ monolayer and a metallic substrate may lead to photoluminescence (PL) quenching in the metallic substrate. Graphene and hexagonal boron nitride monolayer are considered building blocks of a new generation of electronics also commonly used as encapsulating materials for PL studies. Moreover graphene is proved to be a suitable substrate for the MBE growth of transitional metal dichalcogenides (TMDCs). In chapter 1, we start with an introduction to TMDCs. Then we focus on MoS2 monolayer state of the art research in the fields of application scenario; synthesis approaches; electronic, spin, and optical properties; and interactions with magnetic fields and magnetic materials. We briefly touch the basics of magnetism in solids and move on to discuss various magnetic exchange interactions and magnetic proximity effect. Then we describe MoS2 optical properties in more detail. We start from basic exciton physics and its manifestation in the MoS2 monolayer. We consider optical selection rules in the MoS2 monolayer and such properties as chirality, spin-valley locking, and coexistence of bright and dark excitons. Chapter 2 contains an overview of the employed surface science methods: angle-integrated, angle-resolved, and spin-resolved photoemission; low energy electron diffraction and scanning tunneling microscopy. In chapter 3, we describe MoS2 monolayer synthesis details for two substrates: gold monocrystal with (111) surface and graphene on cobalt thin film with Co(111) surface orientation. The synthesis descriptions are followed by a detailed characterisation of the obtained structures: fingerprints of MoS2 monolayer formation; MoS2 monolayer symmetry and its relation to the substrate below; characterisation of MoS2 monolayer coverage, domain distribution, sizes and shapes, and moire structures. In chapter~4, we start our discussion with MoS2/Au(111) electronic and spin structure. Combining density functional theory computations (DFT) and spin-resolved photoemission studies, we demonstrate that the MoS2 monolayer band structure features an in-plane Rashba spin splitting. This confirms the possibility of MoS2 monolayer spin structure manipulation via a substrate. Then we investigate the influence of a magnetic proximity in the MoS2/graphene/Co system on the MoS2 monolayer spin structure. We focus our investigation on MoS2 high symmetry points: G and K. First, using spin-resolved measurements, we confirm that electronic states are spin-split at the G point via a magnetic proximity effect. Second, combining spin-resolved measurements and DFT computations for MoS2 monolayer in the K point region, we demonstrate the appearance of a small in-plane spin polarisation in the valence band top and predict a full in-plane spin polarisation for the conduction band bottom. We move forward discussing how these findings are related to the MoS2 monolayer optical properties, in particular the possibility of dark exciton observation. Additionally, we speculate on the control of the MoS2 valley energy via magnetic proximity from cobalt. As graphene is spatially buffering the MoS2 monolayer from the Co thin film, we speculate on the role of graphene in the magnetic proximity transfer by replacing graphene with vacuum and other 2D materials in our computations. We finish our discussion by investigating the K-doped MoS2/graphene/Co system and the influence of this doping on the electronic and spin structure as well as on the magnetic proximity effect. In summary, using a scalable MBE approach we synthesised MoS2/Au(111) and MoS2/graphene/Co systems. We found a Rashba effect taking place in MoS2/Au(111) which proves that the MoS2 monolayer in-plane spin structure can be modified. In MoS2/graphene/Co the in-plane magnetic proximity effect indeed takes place which rises the possibility of fine tuning the MoS2 optical properties via manipulation of the the substrate magnetisation. N2 - Die Molybdändisulfid-Monolage MoS2 ist ein mechanisch und chemisch robuster Direktband-Halbleiter. Seine Valley-Eigenschaften versprechen spin- und valleybezogene spintronische, valleytronische und optoelektronische Anwendungen. Hier wurde die Möglichkeit untersucht, die elektronische und Spin-Struktur von MoS2 durch Wechselwirkung mit einem Substrat zu beeinflussen. Eine Kontrolle der elektronischen Struktur und der Spinstruktur ist unerlässlich, wenn man die optischen Eigenschaften kontrollieren will. Wir haben zwei Methoden angewandt, um die Spinentartung aufzuheben. Zum einen haben wir die MoS2-Monolage einem elektrischen Potentialgradienten ausgesetzt, zum anderen einem starken Magnetfeld in der Ebene, das durch einen magnetischen Proximity-Effekt erzeugt wurde. Zu diesem Zweck haben wir zwei Systeme hergestellt: eine MoS2-Monolage auf einem Gold-Einkristall und eine MoS2-Monolage auf Graphen auf einer dünnen Kobalt-Schicht. Wir modifizierten ein zuvor vorgeschlagenes Verfahren zur Synthese der MoS2-Monolage auf der Au(111)-Oberfläche und erzielten mit der MBE-Methode eine Bedeckung von ≈0,4 MoS2-Monolage. Die Bedeckung wies eine 10×10-Überstruktur auf und bestand aus gleichmäßig verteilten und ähnlich orientierten Domänen von ≈30 nm Größe. Die Kombination aus DFT-Simulationen und spinaufgelöster Photoemissionsspektroskopie bestätigte das Vorhandensein einer Rashba-ähnlichen Spinaufspaltung in der Ebene der MoS2-Valenzbandzustände in Bereichen mit k ⃗≠0, aus Symmetriegründen mit Ausnahme des K ̅-Punktes. Wir untersuchten die Möglichkeit, die Spinstruktur der MoS2-Monolage durch den magnetischen Proximity-Effekt zu manipulieren, einschließlich der Bereiche um Hochsymmetriepunkte. Die Regionen der K ̅ und (K') ̅ Punkte sind am interessantesten, da sich dort die direkte Bandlücke der MoS2-Monolage befindet. Eine energetische Verschiebung der Valenz- und Leitungsbandzustände relativ zueinander in diesen Bereichen sollte die Kontrolle über die Valley-Aufspaltung der MoS2-Monolage ermöglichen. Andererseits sollte eine Neigung der Spinrichtung dieser Zustände in Richtung der Spinrichtung in der Ebene die optischen Auswahlregeln drastisch ändern und ein dunkles Exziton aufhellen. Wir haben ein Kobalt-Dünnschichtsubstrat aufgrund seiner in der Ebene liegenden magnetischen Anisotropie als Testobjekt für den magnetischen Proximity-Effekt gewählt. Wir benutzten die CVD-Methode, um es zunächst mit Graphen zu beschichten, und dann die MBE-Methode, um eine ≈0,4 MoS2-Monolage auf dem Substrat herzustellen. Wir platzierten das Graphen zwischen der MoS2-Monolage und der Kobalt-Dünnschicht, um zu verhindern, dass die Exzitonen von MoS2 durch das metallische Substrat ausgelöscht werden. Für die Herstellung der MoS2-Monolage auf dem Graphen/Co-Substrat haben wir ein Verfahren modifiziert, das für die Herstellung von MoS2 auf einem Graphen/Ir-Substrat vorgeschlagen wurde. Die einschichtige MoS2-Bedeckung von ≈0,4 Atomlagen zeigt eine große Fläche kristalliner Domänen von mehr als 200 nm Größe. Vier MoS2-Einheitszellen entsprechen fünf Graphen-Einheitszellen. Dies lässt auf eine 5×5-Überstruktur schließen, was durch die LEED-Bilder bestätigt wird. Andererseits zeigt die STM-Abbildung mit atomarer Auflösung eine quasi-periodische Struktur mit mehreren Arten von Moiré-Mustern. Da das epitaktische Wachstum von MoS2 entlang der Graphen-Untergitter A und B gleich wahrscheinlich ist, weist die MoS2-Monolage eine gleiche Anzahl von um 180° gedrehten Domänen (Spiegeldomänen) auf. Wir bestätigten zunächst das Vorhandensein des magnetischen Proximity-Effekts, indem wir ≈20 meV Zeeman in-plane Spinaufspaltung von MoS2-Valenzbandzuständen im Bereich von Γ ̅ sowohl in DFT-Berechnungen als auch in spinaufgelösten Photoemissionsmessungen beobachteten. Im Bereich von K ̅ stimmen Berechnungen und Messungen in Bezug auf die Spinpolarisation der Valenzbandzustände von 15% überein. Im Gegensatz dazu deuten die DFT-Berechnungen für die Leitungsbandzustände auf eine 100%ige Spinpolarisierung der Zustände hin. Dieses Ergebnis impliziert die Aufhellung der dunklen Exzitonen der MoS2-Monolage. Im Falle der Magnetisierung von Kobalt senkrecht zur Ebene sagen DFT-Berechnungen eine Spinaufspaltung von ≈16 meV bei Γ ̅ und ≈8 meV bei K ̅ und (K') ̅ voraus. Um die Leitungsbandzustände von MoS2 zu untersuchen, haben wir MoS2/Graphen/Co mit Kaliumatomen dotiert. Das resultierende System zeichnet sich dadurch aus, dass Kaliumatome unter MoS2 interkaliert sind, was den Abstand zwischen der MoS2-Monolage und dem Kobaltfilm vergrößert. Spinaufgelöste Messungen zeigten keine in-plane Spinaufspaltung der MoS2-Valenzbandzustände im Bereich von Γ ̅ und der MoS2-Leitungsbandzustände im Bereich von K ̅. Da Graphen eine Pufferschicht zwischen der MoS2-Monolage und der Kobaltschicht bildet, um ein mögliches Exzitonen-Löschen zu verhindern, untersuchten wir die Rolle von Graphen für den magnetischen Proximity-Effekt. In unseren Berechnungen ersetzten wir Graphen durch eine Graphen-Doppelschicht, h-BN, Vakuum und eine Kupfer-Monolage und kamen zu dem Schluss, dass der Effekt stark vom Orbitalüberlapp abhängt. MoS2/h-BN/Co zeigen ähnliche Ergebnisse, während MoS2-Graphen-Doppelschicht/Co und MoS2/Vakuum/Co fast keinen magnetischen Proximity-Effekt aufweisen. Zusammenfassend haben wir mittels spektroskopischer Methoden und DFT-Berechnungen bewiesen, dass die Spinstruktur einer MoS2-Monolage durch Wechselwirkung mit einem Substrat manipuliert werden kann. Wir blicken daher mit Zuversicht auf zukünftige optische Untersuchungen zur optischen Kontrolle von MoS2 und Dichalcogeniden der Gruppe VI durch den magnetischen Proximity-Effekt. KW - MoS₂ KW - Au(111) KW - gold substrate KW - magnetic proximity effect KW - dark exciton KW - Molybdenum sulfide monolayer KW - graphene KW - spin structure KW - valence band structure KW - Cobalt thin film KW - ARPES KW - Angle- and spin-resolved photoemission spectroscopy KW - MBE KW - Molecular Beam Epitaxy KW - CVD KW - Chemical Vapour Deposition KW - synthesis KW - XPS KW - X-rays Photoemission Spectroscopy KW - LEED KW - Low Energy Electron Diffraction KW - MoS₂ KW - Molybdänsulfid Monolagen KW - Graphene KW - Au(111) KW - Goldsubstrat KW - magnetischer Näherungseffekt KW - dunkles Exziton KW - Spinstruktur KW - Leitungsbandstruktur KW - Kobalt-Dünnfilm KW - Photoelektronenspektroskopie KW - Molekularstrahlepitaxie KW - chemische Gasphasenabscheidung KW - Synthese KW - Beugung niederenergetischer Elektronen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-590709 ER - TY - THES A1 - Alexoudi, Xanthippi T1 - Clarifying the discrepant results in the characterization of exoplanetary atmospheres T1 - Klärung der widersprüchlichen Ergebnisse bei der Charakterisierung von exoplaneten Atmosphären N2 - Planets outside our solar system, so-called "exoplanets", can be detected with different methods, and currently more than 5000 exoplanets have been confirmed, according to NASA Exoplanet Archive. One major highlight of the studies on exoplanets in the past twenty years is the characterization of their atmospheres usingtransmission spectroscopy as the exoplanet transits. However, this characterization is a challenging process and sometimes there are reported discrepancies in the literature regarding the atmosphere of the same exoplanet. One potential reason for the observed atmospheric inconsistencies is called impact parameter degeneracy, and it is highly driven by the limb darkening effect of the host star. A brief introductionto those topics in presented in chapter 1, while the motivation and objectives of thiswork are described in chapter 2.The first goal is to clarify the origin of the transmission spectrum, which is anindicator of an exoplanet’s atmosphere; whether it is real or influenced by the impactparameter degeneracy. A second goal is to determine whether photometry from space using the Transiting Exoplanet Survey Satellite (TESS), could improve on the major parameters, which are responsible for the aforementioned degeneracy, of known exoplanetary systems. Three individual projects were conducted in order toaddress those goals. The three manuscripts are presented, in short, in the manuscriptoverview in chapter 3.More specifically, in chapter 4, the first manuscript is presented, which is an ex-tended investigation on the impact parameter degeneracy and its application onsynthetic transmission spectra. Evidently, the limb darkening of the host star isan important driver for this effect. It keeps the degeneracy persisting through different groups of exoplanets, based on the uncertainty of their impact parameter and on the type of their host star. The second goal, was addressed in the second and third manuscripts (chapter 5 and chapter 6 respectively). Using observationsfrom the TESS mission, two samples of exoplanets were studied; 10 transiting inflated hot-Jupiters and 43 transiting grazing systems. Potentially, the refinement or confirmation of their major system parameters’ measurements can assist in solving current or future discrepancies regarding their atmospheric characterization.In chapter 7 the conclusions of this work are discussed, while in chapter 8 itis proposed how TESS’s measurements can be able to discern between erroneousinterpretations of transmission spectra, especially on systems where the impact parameter degeneracy is likely not applicable. N2 - Planeten außerhalb unseres Sonnensystems, sogenannte Exoplaneten", lassen sichmit verschiedenen Methoden aufspüren, und nach Angaben des NASA ExoplanetArchive wurden bisher mehr als 5000 Exoplaneten bestätigt. Ein großer Höhepunktder Studien über Exoplaneten in den letzten zwanzig Jahren ist die Charakterisierung ihrer Atmosphäre mit Hilfe der Methode der Transmissionsspektroskopie. Diese Charakterisierung ist jedoch ein schwieriger Prozess, und manchmal wird in derLiteratur für den gleichen Planeten unterschiedliche Resultate bezüglich seiner Systemparameter gezeigt. Ein möglicher Grund für die beobachteten atmosphärischen Unstimmigkeiten könnte durch die Entartung des Impaktparameters herrühren, diein hohem Maße durch den Verdunkelungseffekt des Muttersterns beeinflusst wird.Eine kurze Einführung in diese Themen wird in Kapitel 1 gegeben, während die Motivation und die Ziele dieser Arbeit in Kapitel 2 beschrieben werden.Das erste Ziel dieser Arbeit ist die Klärung der Herkunft von Merkmalen im Transmissionsspektrum, die Indikatoren für die Atmosphäre eines Exoplaneten sind; obsie real sind oder durch die Entartung des Impaktparameters beeinflusst werden. Einzweites Ziel ist es, festzustellen, ob die Photometrie aus dem Weltraum mit Hilfe desTransiting Exoplanet Survey Satellite (TESS) die atmosphärischen Systemparameter bekannter Exoplanetensysteme verbessern könnte. Drei Einzelprojekte wurdendurchgeführt, um diese Ziele zu erreichen. Die drei Manuskripte werden in der Manuskriptübersicht in Kapitel 3 kurz vorgestellt.Genauer gesagt, wird in Kapitel 4 das erste Manuskript vorgestellt, welches eineerweiterte Untersuchung der Entartung des Impaktparameters und seine Anwendungauf synthetische Transmissionsspektren darstellt. Offensichtlich ist die Randverdunkelung des Muttersterns ein wichtiger Treiber für diesen Effekt. Sie sorgt dafür, dass die Entartung über verschiedene Gruppen von Exoplaneten, die auf der Unsicherheitihrer Impaktparameters und dem Typ ihres Muttersterns beruhen, auftaucht. Daszweite Ziel wurde im zweiten und dritten Manuskript behandelt (Kapitel 5 und Kapitel 6, jeweils). Anhand von Beobachtungen der TESS-Mission wurden zwei Populationen von Exoplaneten untersucht: zehn transitierende, aufgeblähte heiße-Jupiter Planeten und 43 nicht-zentral transitierende. Möglicherweise kann die Verbesserungoder Bestätigung der Messungen der wichtigsten Systemparameter dazu beitragen,aktuelle oder zukünftige Diskrepanzen bei der Charakterisierung ihrer Atmosphärezu lösen.In Kapitel 7 werden die Schlussfolgerungen dieser Arbeit erörtert, während inKapitel 8 diskutiert wird, wie die Messungen von TESS in der Lage sein können,zwischen fehlerhaften Interpretationen von Transmissionsspektren zu unterscheiden,insbesondere bei Systemen, bei denen die Entartung des Impaktparameters wahrscheinlich nicht zutrifft. KW - Exoplaneten KW - exoplanets KW - atmosphere KW - Atmosphäre KW - photometry KW - Photometrie KW - transmission spectroscopy KW - Transmissionsspektroskopie KW - observations with TESS KW - Beobachtungen mit TESS Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-605659 ER - TY - THES A1 - Braun, Tobias T1 - Recurrences in past climates T1 - Rekurrenzen in vergangenen Klimaperioden BT - novel concepts & tools for the study of Palaeoseasonality and beyond BT - neue Konzepte und Methoden zur Analyse von Paläosaisonalität und darüber hinaus N2 - Our ability to predict the state of a system relies on its tendency to recur to states it has visited before. Recurrence also pervades common intuitions about the systems we are most familiar with: daily routines, social rituals and the return of the seasons are just a few relatable examples. To this end, recurrence plots (RP) provide a systematic framework to quantify the recurrence of states. Despite their conceptual simplicity, they are a versatile tool in the study of observational data. The global climate is a complex system for which an understanding based on observational data is not only of academical relevance, but vital for the predurance of human societies within the planetary boundaries. Contextualizing current global climate change, however, requires observational data far beyond the instrumental period. The palaeoclimate record offers a valuable archive of proxy data but demands methodological approaches that adequately address its complexities. In this regard, the following dissertation aims at devising novel and further developing existing methods in the framework of recurrence analysis (RA). The proposed research questions focus on using RA to capture scale-dependent properties in nonlinear time series and tailoring recurrence quantification analysis (RQA) to characterize seasonal variability in palaeoclimate records (‘Palaeoseasonality’). In the first part of this thesis, we focus on the methodological development of novel approaches in RA. The predictability of nonlinear (palaeo)climate time series is limited by abrupt transitions between regimes that exhibit entirely different dynamical complexity (e.g. crossing of ‘tipping points’). These possibly depend on characteristic time scales. RPs are well-established for detecting transitions and capture scale-dependencies, yet few approaches have combined both aspects. We apply existing concepts from the study of self-similar textures to RPs to detect abrupt transitions, considering the most relevant time scales. This combination of methods further results in the definition of a novel recurrence based nonlinear dependence measure. Quantifying lagged interactions between multiple variables is a common problem, especially in the characterization of high-dimensional complex systems. The proposed ‘recurrence flow’ measure of nonlinear dependence offers an elegant way to characterize such couplings. For spatially extended complex systems, the coupled dynamics of local variables result in the emergence of spatial patterns. These patterns tend to recur in time. Based on this observation, we propose a novel method that entails dynamically distinct regimes of atmospheric circulation based on their recurrent spatial patterns. Bridging the two parts of this dissertation, we next turn to methodological advances of RA for the study of Palaeoseasonality. Observational series of palaeoclimate ‘proxy’ records involve inherent limitations, such as irregular temporal sampling. We reveal biases in the RQA of time series with a non-stationary sampling rate and propose a correction scheme. In the second part of this thesis, we proceed with applications in Palaeoseasonality. A review of common and promising time series analysis methods shows that numerous valuable tools exist, but their sound application requires adaptions to archive-specific limitations and consolidating transdisciplinary knowledge. Next, we study stalagmite proxy records from the Central Pacific as sensitive recorders of mid-Holocene El Niño-Southern Oscillation (ENSO) dynamics. The records’ remarkably high temporal resolution allows to draw links between ENSO and seasonal dynamics, quantified by RA. The final study presented here examines how seasonal predictability could play a role for the stability of agricultural societies. The Classic Maya underwent a period of sociopolitical disintegration that has been linked to drought events. Based on seasonally resolved stable isotope records from Yok Balum cave in Belize, we propose a measure of seasonal predictability. It unveils the potential role declining seasonal predictability could have played in destabilizing agricultural and sociopolitical systems of Classic Maya populations. The methodological approaches and applications presented in this work reveal multiple exciting future research avenues, both for RA and the study of Palaeoseasonality. N2 - Unsere Fähigkeit, den Zustand eines Systems vorherzusagen, hängt grundlegend von der Tendenz des Systems ab, zu früheren Zuständen zurückzukehren. Solche "Rekurrenzen" sind sogar Bestandteil unserer Intuition und alltäglichen Erfahrungswelt: regelmäßige Routinen, soziale Zusammentreffen and die Wiederkehr der Jahreszeiten sind hierfür nur vereinzelte Beispiele. Rekurrenzplots (RPs) stellen uns in diesem Kontext eine systematische Methode zur Verfügung, um die Wiederkehreigenschaften von Systemzuständen quantitativ zu untersuchen. Obwohl RPs konzeptionell vergleichsweise simpel sind, stellen sie eine vielseitige Methode zur Analyse von gemessenen Beobachtungsdaten dar. Das globale Klimasystem ist ein komplexes System, bei dem ein datenbasiertes Verständnis nicht lediglich von rein akademischen Wert ist – es ist viel mehr relevant für das Fortbestehen der Gesellschaft innerhalb der natürlichen planetaren Grenzen. Um die heute beobachteten Klimaveränderungen allerdings in einen langfristigen Kontext einzuordnen, benötigen wir empirische Daten, die weit über die Periode hinaus gehen, für die instrumentelle Daten verfügbar sind. Paläoklimatologische Datenreihen repräsentieren hier ein wertvolles Archiv, dessen Auswertung jedoch Analysemethoden erfordert, die an die Komplexitäten von paläoklimatologischen ‘Proxydaten’ angepasst sind. Um einen wissenschaftlichen Beitrag zu dieser Problemstellung zu leisten, befasst sich diese Doktorarbeit mit der Konzeptionierung neuer Methoden und der problemstellungsbezogenen Anpassung bewährter Methoden in der Rekurrenzanalyse (RA). Die hier formulierten zentralen Forschungsfragen konzentrieren sich auf den Nachweis zeitskalen-abhängiger Eigenschaften in nichtlinearen Zeitreihen und, insbesondere, der Anpassung von quantitativen Maßen in der RA, um paläosaisonale Proxydaten zu charakterisieren (‘Paläosaisonalität’). Im ersten Teil dieser Arbeit liegt der Schwerpunkt auf der Entwicklung neuer methodischer Ansätze in der RA. Die Vorhersagbarkeit nichtlinearer (paläo)klimatologischer Zeitreihen ist durch abrupte Übergänge zwischen dynamisch grundlegend verschiedenen Zuständen erschwert (so zum Beispiel das Übertreten sogenannter ‘Kipppunkte’). Solche Zustandsübergänge zeigen oft charakteristische Zeitskalen-Abhängigkeiten. RPs haben sich als Methode zum Nachweis von Zustandsübergängen bewährt und sind darüber hinaus geeignet, Skalenabhängigkeiten zu identifizieren. Dennoch wurden beide Aspekte bislang selten methodisch zusammengeführt. Wir kombinieren hier bestehende Konzepte aus der Analyse selbstähnlicher Strukturen und RPs, um abrupte Zustandsübergänge unter Einbezug der relevantesten Zeitskalen zu identifizieren. Diese Kombination von Konzepten führt uns ferner dazu, ein neues rekurrenzbasiertes, nichtlineares Abhängigkeitsmaß einzuführen. Die quantitative Untersuchung zeitversetzter Abhängigkeiten zwischen zahlreichen Variablen ist ein zentrales Problem, das insbesondere in der Analyse hochdimensionaler komplexer Systeme auftritt. Das hier definierte ‘Rekurrenzfluß’-Abhängigkeitsmaß ermöglicht es auf elegante Weise, derartige Abhängigkeiten zu charakterisieren. Bei räumlich ausgedehnten komplexen Systemen führen Interaktionen zwischen lokalen Variablen zu der Entstehung räumlicher Muster. Diese räumlichen Muster zeigen zeitliche Rekurrenzen. In einer auf dieser Beobachtung aufbauenden Publikation stellen wir eine neue Methode vor, mit deren Hilfe differenzierbare, makroskopische Zustände untersucht werden können, die zu zentralen, zeitlich wiederkehrenden räumlichen Mustern korrespondieren. Folgend leiten wir über zum zweiten Teil dieser Arbeit, indem wir uns Anpassungen von Methoden zur Untersuchung von Paläosaisonalität zuwenden. Messreihen paläoklimatologischer Proxydaten geben uns nur indirekt Informationen über die ihnen zugrunde liegenden Klimavariablen und weisen inhärente Limitationen auf, wie zum Beispiel unregelmäßige Zeitabstände zwischen Datenpunkten. Wir zeigen statistische Verzerrungseffekte auf, die in der quantitativen RA auftreten, wenn Signale mit nichtstationärer Abtastrate untersucht werden. Eine Methode zur Korrektur wird vorgestellt und anhand von Messdaten validiert. Der zweite Teil dieser Dissertation befasst sich mit angewandten Analysen von paläosaisonalen Zeitreihen. Eine Literaturauswertung verbreiteter und potentiell vielversprechender Zeitreihenanalysemethoden zeigt auf, dass es eine Vielzahl solcher Methoden gibt, deren adäquate Anwendung aber Anpassungen an Klimaarchiv-spezifische Grenzen und Probleme sowie eine Zusammenführung interdisziplinärer Fähigkeiten erfordert. Daraufhin untersuchen wir an einem Stalagmiten gemessene Proxydaten aus der zentralen Pazifikregion als ein natürliches Archiv für potentielle Veränderungen der El Niño-Southern Oscillation (ENSO) währen des mittleren Holozäns. Die bemerkenswert hohe zeitliche Auflösung der Proxy-Zeitreihen erlaubt es uns, Verbindungen zwischen der Ausprägung der ENSO und saisonalen Zyklen herzustellen, wobei wir erneut Gebrauch von der RA machen. Die letzte Publikation in dieser Arbeit untersucht, in wie fern die Vorhersagbarkeit saisonaler Veränderungen eine Rolle für die Stabilität von Gesellschaften spielen könnte, deren Nahrungsversorgung auf Landwirtschaft beruht. Die klassische Maya-Zivilisation erlitt zwischen 750-950 CE eine drastische Fragmentierung urbaner Zentren, die mit regionalen Dürren in Verbindung gebracht werden. Auf Grundlage von saisonal-aufgelösten Proxydaten aus der Yok Balum Höhle in Belize, definieren wir ein quantitatives Maß für saisonale Vorhersagbarkeit. Dies erlaubt Schlussfolgerungen über die potentielle Rolle, die ein Verlust saisonaler Vorhersagbarkeit für die sich destablisierenden agrarwirtschaftlichen und soziopolitischen Systeme der Maya gehabt haben könnte. Die methodischen Ansätze und Anwendungen in dieser Arbeit zeigen vielseitige, spannende Forschungsfragen für zukünftige Untersuchungen in der RA und Paläosaisonalität auf. KW - recurrence analysis KW - palaeoclimate KW - seasonality KW - nonlinear time series analysis KW - self-similarity KW - regime shifts KW - climate impact research KW - Klimafolgenforschung KW - nichtlineare Zeitreihenanalyse KW - Paläoklima KW - Rekurrenzanalyse KW - abrupte Übergänge KW - Selbstähnlichkeit Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-586900 ER - TY - THES A1 - Herrero Alonso, Yohana T1 - Properties of high-redshift galaxies in different environments T1 - Eigenschaften von Galaxien mit hoher Rotverschiebung in verschiedenen Umgebungen N2 - The Lyman-𝛼 (Ly𝛼) line commonly assists in the detection of high-redshift galaxies, the so-called Lyman-alpha emitters (LAEs). LAEs are useful tools to study the baryonic matter distribution of the high-redshift universe. Exploring their spatial distribution not only reveals the large-scale structure of the universe at early epochs, but it also provides an insight into the early formation and evolution of the galaxies we observe today. Because dark matter halos (DMHs) serve as sites of galaxy formation, the LAE distribution also traces that of the underlying dark matter. However, the details of this relation and their co-evolution over time remain unclear. Moreover, theoretical studies predict that the spatial distribution of LAEs also impacts their own circumgalactic medium (CGM) by influencing their extended Ly𝛼 gaseous halos (LAHs), whose origin is still under investigation. In this thesis, I make several contributions to improve the knowledge on these fields using samples of LAEs observed with the Multi Unit Spectroscopic Explorer (MUSE) at redshifts of 3 < 𝑧 < 6. N2 - Die Lyman-𝛼 (Ly𝛼)-Linie erleichtert die Detektion von Galaxien bei hoher Rotverschiebung, sogenannten den Lyman-Alpha-Emittern (LAEs). Die Erforschung ihrer Verteilung enthüllt nicht nur die großräumige Struktur des Universums in frühen Epochen, sondern bietet auch einen Einblick in die Entstehung und Entwicklung der Galaxien, die wir heute beobachten. Da Halos aus Dunkler Materie (DMHs) als Orte der Galaxienentstehung dienen, spiegelt die LAE-Verteilung auch die der zugrunde liegenden Dunklen Materie wider. Darüber hinaus sagen theoretische Studien voraus, dass die Verteilung von LAEs auch Auswirkungen auf ihr eigenes zirkumgalaktisches Medium (CGM) hat, indem sie ihre ausgedehnten gasförmigen Ly𝛼-Halos (LAHs) beeinflusst. In dieser Dissertation leiste ich mehrere Beiträge zur Verbesserung des Wissens über diese Felder anhand von Stichproben von LAEs, die mit dem Multi Unit Spectroscopic Explorer (MUSE) bei Rotverschiebungen von 3 < 𝑧 < 6 beobachtet wurden. KW - high-redshift KW - Lyman-alpha emitters KW - clustering KW - large-scale structure KW - Lyman-Alpha-Emitter KW - Clustering KW - hoher Rotverschiebung KW - großräumige Struktur des Universums Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613288 ER - TY - THES A1 - Ilić Petković, Nikoleta T1 - Stars under influence: evidence of tidal interactions between stars and substellar companions T1 - Sterne unter Einfluss: Beweise für Gezeitenwechselwirkungen zwischen Sternen und substellaren Begleitern N2 - Tidal interactions occur between gravitationally bound astrophysical bodies. If their spatial separation is sufficiently small, the bodies can induce tides on each other, leading to angular momentum transfer and altering of evolutionary path the bodies would have followed if they were single objects. The tidal processes are well established in the Solar planet-moon systems and close stellar binary systems. However, how do stars behave if they are orbited by a substellar companion (e.g. a planet or a brown dwarf) on a tight orbit? Typically, a substellar companion inside the corotation radius of a star will migrate toward the star as it loses orbital angular momentum. On the other hand, the star will gain angular momentum which has the potential to increase its rotation rate. The effect should be more pronounced if the substellar companion is more massive. As the stellar rotation rate and the magnetic activity level are coupled, the star should appear more magnetically active under the tidal influence of the orbiting substellar companion. However, the difficulty in proving that a star has a higher magnetic activity level due to tidal interactions lies in the fact that (I) substellar companions around active stars are easier to detect if they are more massive, leading to a bias toward massive companions around active stars and mimicking the tidal interaction effect, and that (II) the age of a main-sequence star cannot be easily determined, leaving the possibility that a star is more active due to its young age. In our work, we overcome these issues by employing wide stellar binary systems where one star hosts a substellar companion, and where the other star provides the magnetic activity baseline for the host star, assuming they have coevolved, and thereby provides the host's activity level if tidal interactions have no effect on it. Firstly, we find that extrasolar planets can noticeably increase the host star's X-ray luminosity and that the effect is more pronounced if the exoplanet is at least Jupiter-like in mass and close to the star. Further, we find that a brown dwarf will have an even stronger effect, as expected, and that the X-ray surface flux difference between the host star and the wide stellar companion is a significant outlier when compared to a large sample of similar wide binary systems without any known substellar companions. This result proves that substellar hosting wide binary systems can be good tools to reveal the tidal effect on host stars, and also show that the typical stellar age indicators as activity or rotation cannot be used for these stars. Finally, knowing that the activity difference is a good tracer of the substellar companion's tidal impact, we develop an analytical method to calculate the modified tidal quality factor Q' of individual host stars, which defines the tidal dissipation efficiency in the convective envelope of a given main-sequence star. N2 - Gezeitenwechselwirkungen treten zwischen gravitativ gebundenen astrophysikalischen Körpern auf. Wenn ihr räumlicher Abstand hinreichend gering ist, können die Körper gegenseitig Gezeiten hervorrufen, die eine Drehimpulsübertragung bewirken und den Entwicklungsweg der Körper verändern, den sie als Einzelobjekte einschlagen würden. Die Gezeitenprozesse sind in den Planet-Mond-Systemen des Sonnensystems und in engen Doppelsternsystemen gut bekannt. Wie verhalten sich jedoch Sterne, die von einem substellaren Begleiter (z. B. einem Planeten oder einem Braunen Zwerg) auf einer engen Bahn umkreist werden? In der Regel wandert ein substellarer Begleiter innerhalb des Korotationsradius eines Sterns in Richtung des Sterns, da er an Bahndrehimpuls verliert. Auf der anderen Seite gewinnt der Stern an Drehimpuls, was seine Rotationsrate erhöhen kann. Dieser Effekt dürfte umso ausgeprägter sein, je massereicher der substellare Begleiter ist. Da die Rotationsrate des Sterns und das Niveau der magnetischen Aktivität gekoppelt sind, sollte der Stern unter dem Gezeiteneinfluss des ihn umkreisenden substellaren Begleiters magnetisch aktiver erscheinen. Die Schwierigkeit beim Nachweis, dass ein Stern aufgrund von Gezeitenwechselwirkungen eine höhere magnetische Aktivität aufweist, liegt jedoch darin, dass (I) substellare Begleiter um aktive Sterne leichter aufzuspüren sind, wenn sie massereicher sind, wodurch eine Tendenz zu massereichen Begleitern um aktive Sterne entsteht und der Effekt der Gezeitenwechselwirkung nachgeahmt wird, und dass (II) das Alter eines Hauptreihensterns nicht leicht bestimmt werden kann, so dass die Möglichkeit besteht, dass ein Stern aufgrund seines jungen Alters aktiver ist. In unserer Arbeit überwinden wir diese Hindernisse, indem wir weiträumige Doppelsternsysteme verwenden, in denen ein Stern einen substellaren Begleiter beherbergt und in denen der andere Stern den Referenzwert für die magnetische Aktivität des Wirtssterns liefert im Fall das Gezeitenwechselwirkungen keinen Einfluss auf ihn haben, wobei wir davon ausgehen, dass die Sterne sich gemeinsam entwickelt haben. Erstens stellen wir fest, dass extrasolare Planeten die Röntgenleuchtkraft des Wirtssterns merklich erhöhen können und dass der Effekt ausgeprägter ist, wenn der Exoplanet mindestens eine jupiterähnliche Masse hat und sich nahe am Stern befindet. Darüber hinaus stellen wir fest, dass ein Brauner Zwerg erwartungsgemäß einen noch stärkeren Einfluss hat und dass der Unterschied im Röntgenflächenfluss zwischen dem Wirtsstern und dem weiträumigen stellaren Begleiter ein signifikanter Ausreißer im Vergleich zu einer großen Stichprobe ähnlicher weiträumiger Doppelsternsysteme ohne bekannte substellare Begleiter ist. Dieses Ergebnis beweist, dass weiträumige Doppelsternsysteme mit substellaren Begleitern ein gutes Werkzeug sein können, um den Gezeiteneffekt auf Wirtssterne aufzudecken, und zeigt auch, dass die typischen stellaren Altersindikatoren wie Aktivität oder Rotation für diese Sterne nicht verwendet werden können. Mit dem Wissen, dass der Aktivitätsunterschied ein guter Indikator für den Gezeiteneinfluss des substellaren Begleiters ist, entwickeln wir schließlich eine analytische Methode zur Berechnung des modifizierten Gezeitenqualitätsfaktors Q' für einzelne Wirtssterne, der die Effizienz der Gezeitendissipation in der konvektiven Hülle eines gegebenen Hauptreihensterns definiert. KW - stellar evolution KW - tidal interactions KW - star-planet systems KW - star-brown dwarf systems KW - Stern-Brauner Zwerg Systeme KW - Stern-Planet Systeme KW - Sternentwicklung KW - Gezeitenwechselwirkungen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-615972 ER - TY - THES A1 - Eggers, Nele T1 - Properties of Arctic aerosol in the transition between Arctic haze to summer season derived by lidar N2 - During the Arctic haze period, the Arctic troposphere consists of larger, yet fewer, aerosol particles than during the summer (Tunved et al., 2013; Quinn et al., 2007). Interannual variability (Graßl and Ritter, 2019; Rinke et al., 2004), as well as unknown origins (Stock et al., 2014) and properties of aerosol complicate modeling these annual aerosol cycles. This thesis investigates the modification of the microphysical properties of Arctic aerosols in the transition from Arctic haze to the summer season. Therefore, lidar measurements of Ny-Ålesund from April 2021 to the end of July 2021 are evaluated based on the aerosols’ optical properties. An overview of those properties will be provided. Furthermore, parallel radiosonde data is considered for indication of hygroscopic growth. The annual aerosol cycle in 2021 differs from expectations based on previous studies from Tunved et al. (2013) and Quinn et al. (2007). Developments of backscatter, extinction, aerosol depolarisation, lidar ratio and color ratio show a return of the Arctic haze in May. The haze had already reduced in April, but regrew afterwards. The average Arctic aerosol displays hygroscopic behaviour, meaning growth due to water uptake. To determine such a behaviour is generally laborious because various meteorological circumstances need to be considered. Two case studies provide further information on these possible events. In particular, a day with a rare ice cloud and with highly variable water cloud layers is observed. N2 - Während der Arctic haze Periode sind größere, jedoch auch weniger, Aerosole in der arktischen Troposphäre vorhanden als im Sommer (Tunved et al., 2013; Quinn et al., 2007). Interannuale Variabilität (Graßl and Ritter, 2019; Rinke et al., 2004), sowie unbekannte Herkunft (Stock et al., 2014) und Eigenschaften der Aerosole erschweren die Modellierung der Aerosol-Jahresgänge. Diese Arbeit untersucht, wie sich die mikrophysikalischen Eigenschaften der Aerosole beim Übergang vom Arctic haze zur Sommerzeit ändern. Dafür werden Lidar Messungen aus Ny-Ålesund von April 2021 bis Ende Juli 2021 hinsichtlich der optischen Eigenschaften der Aerosole untersucht. Ein Überblick über diese Eigenschaften wird gegeben. Zusätzlich werden parallele Radiosondendaten mit einbezogen, um Hinweise auf hygroskopisches Wachstum zu erhalten. Der Jahresgang der Aerosole in 2021 unterscheidet sich von Erwartungen, gebildet aus früheren Studien von Tunved et al. (2013) und Quinn et al. (2007). Die zeitliche Entwicklung des Rückstreuungskoeffizienten, Extinktionskoeffizienten, der Aerosol Depolarisation, des Lidarverhältnisses und des Farbverhältnisses zeigen, dass der Arctic haze im Mai zurückkehrt. Im April hatte der haze bereits abgenommen, stieg in Mai jedoch wieder an. In der Arktis zeigt ein Aerosol typischerweise hygroskopisches Verhalten - mit anderen Worten, es wächst durch Aufnahme von Wasser. Ein solches alleine aus Fernerkundungsdaten zu bestimmen ist jedoch in der Regel aufwendig, weil unterschiedliche meteorologische Bedingungen zu berücksichtigen sind. Zwei Fallstudien geben mehr Informationen über die möglichen hygroskopischen Verhaltensweisen der Aerosole. Insbesondere wird auch ein Tag mit einer Eiswolke und stark fluktuierenden Wasserwolken beobachtet. KW - remote sensing KW - Lidar KW - Arctic aerosol KW - aerosol: optical properties KW - aerosol: hygroscopic growth KW - Arctic haze KW - arktischer Dunst KW - aerosol: hygroskopisches Wachstum KW - aerosol: optische Eigenschaften KW - arktisches Aerosol KW - Fernerkundung KW - Lidar Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-619438 ER - TY - THES A1 - Gruner, David T1 - New frontiers in gyrochronology T1 - Neue Horizonte in Gyrochronologie BT - exploring the evolution of stellar rotation in open clusters and wide binaries BT - eine Untersuchung der Entwicklung von Sternrotation in offenen Sternhaufen und weiten Doppelsternsystemen N2 - Late-type stars are by far the most frequent stars in the universe and of fundamental interest to various fields of astronomy – most notably to Galactic archaeology and exoplanet research. However, such stars barely change during their main sequence lifetime; their temperature, luminosity, or chemical composition evolve only very slowly over the course of billions of years. As such, it is difficult to obtain the age of such a star, especially when it is isolated and no other indications (like cluster association) can be used. Gyrochronology offers a way to overcome this problem. Stars, just like all other objects in the universe, rotate and the rate at which stars rotate impacts many aspects of their appearance and evolution. Gyrochronology leverages the observed rotation rate of a late-type main sequence star and its systematic evolution to estimate their ages. Unlike the above-mentioned parameters, the rotation rate of a main sequence star changes drastically throughout its main sequence lifetime; stars spin down. The youngest stars rotate every few hours, whereas much older stars rotate only about once a month, or – in the case of some late M-stars – once in a hundred days. Given that this spindown is systematic (with an additional mass dependence), it gave rise to the idea of using the observed rotation rate of a star (and its mass or a suitable proxy thereof) to estimate a star’s age. This has been explored widely in young stellar open clusters but remains essentially unconstrained for stars older than the sun, and K and M stars older than 1 Gyr. This thesis focuses on the continued exploration of the spindown behavior to assess, whether gyrochronology remains applicable for stars of old ages, whether it is universal for late-type main sequence stars (including field stars), and to provide calibration mileposts for spindown models. To accomplish this, I have analyzed data from Kepler space telescope for the open clusters Ruprecht 147 (2.7 Gyr old) and M 67 (4 Gyr). Time series photometry data (light curves) were obtained for both clusters during Kepler’s K2 mission. However, due to technical limitations and telescope malfunctions, extracting usable data from the K2 mission to identify (especially long) rotation periods requires extensive data preparation. For Ruprecht 147, I have compiled a list of about 300 cluster members from the literature and adopted preprocessed light curves from the Kepler archive where available. They have been cleaned of the gravest of data artifacts but still contained systematics. After correcting them for said artifacts, I was able to identify rotation periods in 31 of them. For M 67 more effort was taken. My work on Ruprecht 147 has shown the limitations imposed by the preselection of Kepler targets. Therefore, I adopted the time series full frame image directly and performed photometry on a much higher spatial resolution to be able to obtain data for as many stars as possible. This also means that I had to deal with the ubiquitous artifacts in Kepler data. For that, I devised a method that correlates the artificial flux variations with the ongoing drift of the telescope pointing in order to remove it. This process was a large success and I was able to create light curves whose quality match and even exceede those that were created by the Kepler mission – all while operating on higher spatial resolution and processing fainter stars. Ultimately, I was able to identify signs of periodic variability in the (created) light curves for 31 and 47 stars in Ruprecht 147 and M 67, respectively. My data connect well to bluer stars of cluster of the same age and extend for the first time to stars redder than early-K and older than 1 Gyr. The cluster data show a clear flattening in the distribution of Ruprecht 147 and even a downturn for M 67, resulting in a somewhat sinusoidal shape. With that, I have shown that the systematic spindown of stars continues at least until 4 Gyr and stars continue to live on a single surface in age-rotation periods-mass space which allows gyrochronology to be used at least up to that age. However, the shape of the spindown – as exemplified by the newly discovered sinusoidal shape of the cluster sequence – deviates strongly from the expectations. I then compiled an extensive sample of rotation data in open clusters – very much including my own work – and used the resulting cluster skeleton (with each cluster forming a rip in color-rotation period-mass space) to investigate if field stars follow the same spindown as cluster stars. For the field stars, I used wide binaries, which – with their shared origin and coevality – are in a sense the smallest possible open clusters. I devised an empirical method to evaluate the consistency between the rotation rates of the wide binary components and found that the vast majority of them are in fact consistent with what is observed in open clusters. This leads me to conclude that gyrochronology – calibrated on open clusters – can be applied to determine the ages of field stars. N2 - Sterne mit späten Spektraltypen sind mit Abstand die Häufigsten im Universum und von großem Interesse für verschiedene Bereiche der Astronomie. Dabei sind insbesondere galaktische Archäologie und die Erforschung von Exoplanten zu nennen. Das Problem ist jedoch, dass sich diese Sterne nur sehr langsam entwickeln; ihre Temperatur, Helligkeit und chemische Zusammensetzung ändern kaum während ihrer langen Hauptreihenphase. Daher ist es schwierig für solche Sterne ein Alter zu bestimmen – vorallem wenn sie isoliert sind und es keine anderne Indikatoren (z.B. die Zugehörigkeit zu einem Sternhaufen) gibt. Eine Möglichkeit dieses Problem zu umgehen ist Gyrochronologie. Sterne, wie alle anderen Objekte im Universum, rotieren und die Rate, mit der sie rotieren, beeinflusst viele Aspekte ihrer Evolution. Gyrochronologie nutzt die beobachtete Rotation und ihre Änderung mit der Zeit als ein Mittel zur Altersbestimmung. Anders als zuvor genannte Parameter ändert sich die Rate, mit der Sterne rotieren, deutlich im Laufe ihrer Hauptreihenentwicklung. Sie verlangsamt sich. Junge Sterne rotieren in wenigen Stunden einmal um sich selbst – ältere brauchen dafür schon einen Monat oder gar bis zu über hundert Tage. Die Tatsache, dass das Abbremsen systematischen Gesetzmäßigkeiten unterliegt, gebar die Idee dies zu nutzen um das Alter eines Sternes zu bestimmen. Das Verhalten junger Sterne wurde ausführlich erfoscht, jedoch für die meisten Sterne älter als 1 Gyr nicht bekannt, wie sich die Rotationsraten entwickeln. Diese Arbeit fokussiert sich auf die fortgesetzte Erforschung des Abbremsens; insbesondere ob Gyrochronologie auch für ältere Sterne nutzbar ist, ob es universell für alle Sterne (inklusive Feldsterne) ist und darauf weitere Kalibrationspunkte für Abbrems-Modelle bereitzustellen. Dafür habe ich, basierend auf photometrischen Zeitserien (Lichtkurven) von Keplers K2 Programm, die offenen Sternhaufen Ruprecht 147 (2.7 Gyr alt) and M 67 (4 Gyr) untersucht. Es sind jedoch umfangreiche Schritte in der Datenverarbeitung notwendig um Fehlfunktionen und technischen Limitationen des Teleskops zu begegnen. Für Ruprecht 147 habe ich aus Literaturdaten eine Liste von 300 Haufen-zugehörigen Sternen erstellt und mit fertigreduzierte Lichtkurven aus dem Kepler Archiv kombiniert. Die gröbsten Datensystematiken wurden in diesen bereinigt, denoch sind problematische Artefakte weiterhin vorhanden. Die Arbeit an Ruprecht 147 hat die Limitationen von archivierten Kepler Daten gezeigt. Daher wurde für M 67 mehr Aufwand betrieben. Direkt basierend auf den photometrischen Auffnahmen habe ich eigene Lichtkurven erzeugt, was eine deutlich höhere räumliche Auflösung erlaubt hat. Das hieß jedoch auch, dass ich mich mit all Systematiken in Kepler Daten befassen musste. Dafür habe ich eine Methodik konzipiert, die die künstlichen Variation im aufgezeichneten Fluss mit der Position eines Sterns auf dem Detektor korreliert und daraus eine Korrektur bestimmt. Dieser Prozess war so erfolgreich, dass ich Lichtkurven kreiert habe, die in ihrer Qualität an die archivierten Daten heran kommen oder sie gar übersteigen. Nach entsprechender Korrektur der Artefakte konnte ich Rotationsperioden für 31 (in Ruprecht 147) und 47 (in M 67) Sterne identifizieren. Genau wie zuvor in jüngeren Sternhaufen gesehen, folgen auch die äelteren Sternhaufen einer klaren Sequenz im Farb-Rotations-Raum. Meine Daten schließen direkt an Ergebnisse gleichaltriger Haufen an und erweitern diese zum ersten Mal zu Sternen älter als 1 Gyr und röter als frühe K-Sterne. Meine Ergebnisse zeigen eine deutliche Abweichung von der erwarteten Entwicklung, verkörpert durch eine klare Abflachung der Sequenz für Ruprecht 147, die für M 67 eine sinusförmige Struktur annimmt. Dennoch konnte ich damit zeigen, dass sich das systematische Abbremsen der Rotation von Sterne auch bis 4 Gyr fortsetzt und Sterne sich weiterhin auf eine wohldefinierten Ebene im Farb-Rotations-Alters-Raum befinden. Das heißt auch, Gyrochronologie kann mindestens für bis zu 4 Gyr alte Sterne genutzt werden. Basierend auf meinen eigenen Ergebnissen und Literaturdaten für jüngere Sternhaufen habe ich einen Vergleich mit Feldsternen durchgeführt. Die Feldsterne für diesen Vergleich entstammen weiten Doppelsternsystemen. Deren gemeinsamer Ursprung erlaubt eine Evaluierung der inneren Konsistenz beider Sterne. Mein Vergleich hat gezeigt, dass Doppelsternsysteme mit sich selbst aber auch mit den Sternhaufen konsistent sind. Ich habe damit erstmalig gezeigt, dass sich die Rotation von Feldsternen und Haufensternen gleich entwickelt. In Konsequenz bedeutet dies auch, dass Gyrochronologie angewandt werden kann, um das Alter von Feldsternen zu bestimmen. KW - Gyrochronologie KW - gyrochronology KW - spindown KW - rotation KW - Rotation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-615268 ER - TY - THES A1 - Bastian, Martin T1 - An emergent machine learning approach for seasonal cyclone activity forecasts N2 - Seasonal forecasts are of great interest in many areas. Knowing the amount of precipitation for the upcoming season in regions of water scarcity would facilitate a better water management. If farmers knew the weather conditions of the upcoming summer at sowing time, they could select those cereal species that are best adapted to these conditions. This would allow farmers to improve the harvest and potentially even reduce the amount of pesticides used. However, the undoubted advantages of seasonal forecasts are often opposed by their high degree of uncertainty. The great challenge of generating seasonal forecasts with lead times of several months mainly originates from the chaotic nature of the earth system. In a chaotic system, even tiny differences in the initial conditions can lead to strong deviations in the system’s state in the long run. In this dissertation we propose an emergent machine learning approach for seasonal forecasting, called the AnlgModel. The AnlgModel combines the analogue method with myopic feature selection and bootstrapping. To benchmark the abilities of the AnlgModel we apply it to seasonal cyclone activity forecasts in the North Atlantic and Northwest Pacific. The AnlgModel demonstrates competitive hindcast skills with two operational forecasts and even outperforms these for long lead times. In the second chapter we comprehend the forecasting strategy of the Anlg-Model. We thereby analyse the analogue selection process for the 2017 North Atlantic and the 2018 Northwest Pacific seasonal cyclone activity. The analysis shows that those climate indices which are known to influence the seasonal cyclone activity, such as the Niño 3.4 SST, are correctly represented among the selected analogues. Furthermore the selected analogues reflect large-scale climate patterns that were identified by expert reports as being determinative for these particular seasons. In the third chapter we analyse the features that are used by the AnlgModel for its predictions. We therefore inspect the feature relevance (FR). The FR patterns learned by the AnlgModel show a high congruence with the predictor regions used by the operational forecasts. However, the AnlgModel also discovered new features, such as the SST anomaly in the Gulf of Guinea during November. This SST pattern exhibits a remarkably high predictive potential for the upcoming Atlantic hurricane activity. In the final chapter we investigate potential mechanisms, that link two of these regions with high feature relevance to the Atlantic hurricane activity. We mainly focus on ocean surface transport. The ocean surface flow paths are calculated using Lagrangian particle analysis. We demonstrate that the FR patterns in the region of the Canary islands do not correspond with ocean surface transport. It is instead likely that these FR patterns fingerprint a wind transport of latent heat. The second region to be studied is situated in the Gulf of Guinea. Our analysis shows that the FR patterns seen there do fingerprint ocean surface transport. However, our simulations also show that at least one other mechanism is involved in linking the Gulf of Guinea SST anomaly in November to the hurricane activity of the upcoming season. In this work the AnlgModel does not only demonstrate its outstanding forecast skills but also shows its capabilities as research tool for detecting oceanic and atmospheric mechanisms. KW - seasonal cyclone activity forecasts Y1 - 2023 ER - TY - THES A1 - Stechemesser, Annika T1 - Human behaviour in a warming world BT - empirical evidence from social media and mobility data Y1 - 2023 ER - TY - THES A1 - Damle, Mitali T1 - Gas distribution around galaxies in cosmological simulations T1 - Gasverteilung um Galaxien in kosmologischen Simulationen N2 - The evolution of a galaxy is pivotally governed by its pattern of star formation over a given period of time. The star formation rate at any given time is strongly dependent on the amount of cold gas available in the galaxy. Accretion of pristine gas from the Intergalactic medium (IGM) is thought to be one of the primary sources for star-forming gas. This gas first passes through the virial regions of the galaxy before reaching the Interstellar medium (ISM), the hub of star formation. On the other hand, owing to the evolutionary course of young and massive stars, energetic winds are ejected from the ISM to the virial regions of the galaxy. A bunch of interlinked, complex astrophysical processes, arising from the concurrent presence of both infalling as well as outbound gas, play out over a range of timescales in the halo region or the Circumgalactic medium (CGM) of a galaxy. It would not be incorrect to say that the CGM has a stronghold over the gas reserves of a galaxy and thus, plays a backhand, yet, rather pivotal role in shaping many galactic properties, some of which are also readily observable. Observing the multi-phase CGM (via spectral-line ion measurements), however, remains a non-trivial effort even today. Low particle densities as well as the CGM’s vast spatial extent, coupled with likely deviations from a spherical distribution, marr the possibility of obtaining complete, unbiased, high-quality spectral information tracing the full extent of the gaseous halo. This often incomplete information leads to multiple inferences about the CGM properties that give rise to multiple contradicting models. In this regard, computer simulations offer a neat solution towards testing and, subsequently, falsifying many of these existing CGM models. Thanks to their controlled environments, simulations are able to not only effortlessly transcend several orders of magnitude in time and space, but also get around many of the observational limitations and provide some unique views on many CGM properties. In this thesis, I focus on effectively using different computer simulations to understand the role of CGM in various astrophysical contexts, namely, the effect of Local Group (LG) environment, major merger events and satellite galaxies. In Chapter 2, I discuss the approach used for modeling various phases of the simulated z = 0 LG CGM in Hestia constrained simulations. Each of the three realizations contain a Milky Way (MW)–Andromeda (M31) galaxy pair, along with their corresponding sets of satellite galaxies, all embedded within the larger cosmological context. For characterizing the different temperature–density phases within the CGM, I model five tracer ions with cloudy ionization modeling. The cold and cool–ionized CGM (H i and Si iii respectively) in Hestia is very clumpy and distributed close to the galactic centers, while the warm-hot and hot CGM (O vi, O vii and O viii) is tenuous and volume-filling. On comparing the H i and Si iii column densities for the simulated M31 with observational measurements from Project AMIGA survey and other low-z galaxies, I found that Hestia galaxies produced less gas in the outer CGM, unlike observations. My carefully designed observational bias model subsequently revealed the possibility that some MW gas clouds might be incorrectly associated with the M31 CGM in observations, and hence, may be partly responsible for giving rise to the detected mismatch between simulated data and observations. In Chapter 3, I present results from four zoom–in, major merger, gas–rich simulations and the subsequent role of the gas, originally situated in the CGM, in influencing some of the galactic observables. The progenitor parameters are selected such that the post–merger remnants are MW–mass galaxies. We generally see a very clear gas bridge joining the merging galaxies in case of multiple passage mergers while such a bridge is mostly absent when a direct collision occurs. On the basis of particle–to–galaxy distance computations and tracer particle analysis, I found that about 33–48 percent of the cold gas contributing to the merger–induced star formation in the bridge originated from the CGM regions. In Chapter 4, I used a sample of 234 MW-mass, L* galaxies from the TNG50 cosmological simulations, with an aim of characterizing the impact of their global satellite populations on the extended cold CGM properties of their host L* halos. On the basis of halo mass and number of satellite galaxies (N_sats ), I categorized the sample into low and high mass bins, and subsequently into bottom, inter and top quartiles respectively. After confirming that satellites indeed influence the extended cold halo gas density profiles of the host galaxies, I investigated the effects of different satellite population parameters on the host halo cold CGMs. My analysis showed that there is hardly any cold gas associated with the satellite population of the lowest mass halos. The stellar mass of the most massive satellite (M_*mms ) impacted the cold gas in low mass bin halos the most, while N_sats (followed by M_*mms ) was the most influential factor for the high mass halos. In any case, how easily cold gas was stripped off the most massive satellite did not play much role. The number of massive (Stellar mass, M* > 10^8 M_solar) satellites as well as the M_*mms associated with a galaxy are two of the most crucial parameters determining how much cold gas ultimately finds its way from the satellites to the host halo. Low mass galaxies are found rather lacking on both these fronts unlike their high mass counterparts. This work highlights some aspects of the complex gas physics that constitute the basic essence of a low-z CGM. My analysis proved the importance of a cosmological environment, local surroundings and merger history in defining some key observable properties of a galactic CGM. Furthermore, I found that different satellite properties were responsible for affecting the cold–dense CGM of the low and high-mass parent galaxies. Finally, the LG emerged as an exciting prospect for testing and pinning down several intricate details about the CGM. N2 - Die zeitliche Entwicklung der Sternenentstehung in einer Galaxie ist ein bestimmender Faktor für deren Entwicklung. Dabei ist die Sternenentstehungsrate stark abhängig von der in der Galaxie verfügbaren Menge an kaltem Gas. Die Akkretion von Gas aus dem intergalaktischen Medium (IGM) wird als eine der wichtigsten Quellen für das Gasreservoir angesehen, aus dem sich junge Sterne bilden. Bei diesem Prozess passiert das Gas zunächst die virialisierten äußeren Regionen der Milchstraße bevor es das Interstellare Medium (ISM) erreicht, der wichtigste Ort für die galaktische Sternentstehung. Im Gegensatz dazu tragen energiereiche Winde Gas zurück in die virialisierten Außenbereiche der Galaxie. Diese entstehen aufgrund der spezifischen Evolutionsprozesse von besonders jungen und massereichen Sternen in der galaktischen Scheibe. Durch das Zusammenspiel von einfallendem und das die Galaxie verlassendem Gas entsteht eine Vielzahl von astrophysikalischen Prozessen welche auf unterschiedlichsten Zeitskalen sowie in der Haloregion der Galaxie und dem zirkumgalaktischen Medium (CGM) von besonderer Wichtigkeit sind. Es kann behauptet werden, dass das CGM maßgeblich über die Gasreserven der Galaxie entscheidet und daher eine elementare Rolle in der Bestimmung vieler galaktischer Eigenschaften spielt von denen mache direkt beobachtbar sind. Die Beobachtung des CGM in seinen vielen unterschiedlichen Gasphasen (durch die Spektrallinienanalyse mehrerer Ionenspezies) gestaltet sich auch heute noch als kompliziert. Die geringen Teilchendichten und die schiere Größe im Zusammenspiel mit Abweichungen von sphärischer Geometrie erschweren es, vollständige, repräsentative und hochqualitative spektrale Datensätze zu erhalten welche das volle Ausmaß das galaktischen Halos in Betracht ziehen. Diese unvollständige Informationslage führt oft zu unterschiedlichen Interpretationen der Eigenschaften des CGM welche sich in verschiedenen, sich mitunter widersprechenden Modellen, widerspiegeln. In diesem Zusammenhang bieten Computersimulationen eine elegante Lösung, um viele der CGM Modelle zu testen und schließlich zu verifizieren oder falsifizieren. Die kontrollierte Umgebung erlaubt es, das CGM mühelos auf unterschiedlichsten Größenordnungen in Raum und Zeit zu untersuchen aber auch observationstechnische Limitationen zu umgehen, um ein einzigartiges Bild der Eingenschaften des CGM zu erhalten. In dieser Arbeit fokussiere ich mich auf die effektive Nutzung von verschiedenen Computersimulationen, um die Rolle des CGM im verschiedenen astrophysikalischen Kontexten zu verstehen. Im Kapitel 2 diskutiere ich den Ansatz, welcher für das Modellieren derunterschiedlichen Gasphasen des CGM in der Lokalen Gruppe (LG) bei z = 0 in den ”constrained” Simulationen des Hestia Projekts angewandt worden iii ist. Jede der drei Realisierungen enthält ein Milchstraßen-M31 Paar zusammen ihren Satellitengalaxien. Alle zusammen sind dabei eingebettet in den größeren kosmologischen Kontext. Für die Charakterisierung der unterschiedlichen Temperatur-Dichte Phasen im CGM habe ich eine Gruppe von fünf Ionen gewählt welche das Vorhandensein der Phasen anzeigen. Für jede der Zellen in der Simulation habe ich das cloudy post-processing Toolkit angewandt und die entsprechenden Anteile der Ionen im Gas bestimmt. Das kalte und kühle CGM (entsprechend charakterisiert durch H i beziehungsweise Si iii) zeigt sich sehr klumpig und ist nahe an den galaktischen Zentren verteilt während das warm-heiße CGM (charakterisiert durch O vi, O vii, O viii) dünn verteilt und volumenfüllend ist. Durch den Vergleich der Säulendichten für H i und Si iii aus den Simulationen zusammen mit Beobachtungsdaten der AMIGA Durchmusterung und Studien über andere Galaxien mit geringer Rotverschiebung habe ich herausgefunden, dass hestia weniger Gas in den Außenbereichen des CGM produziert als es die Beobachtungsdaten suggerieren. Mein sorgfältig entworfenes Modell für den Beobachtungsbias hat die Möglichkeit aufgezeigt, dass in Beobachtungen mache der Milchstraße zugehörigen Gaswolken als M31-zugehörig missinterpretiert werden könnten. Im Kapitel 3 präsentiere ich Ergebnisse von vier zoom-in, major merger und gasreichen Simulationen unter dem Gesichtspunkt der Rolle des Gases, welches ursprünglich dem CGM zugehörig ist und dessen Einfluss auf einige galaktische Observablen. Die initialen Parameter sind so ausgewählt, dass die den Verschmelzungen entspringenden Galaxien eine vergleichbare Masse wie die der Milchstraße besitzen. Im Allgemeinen sehen wir eine klare Brücke von Gas im Falle von Verschmelzungen welche mehrere separate Annäherungen durchlebten. Im Vergleich dazu fehlt diese Brücke in den Fällen einer direkten Kollision. Auf der Grundlage von particle-to-galaxy Distanz Berechnungen und tracer particle Analysen habe ich herausgefunden, dass rund 33–48 Prozent des kalten Gases aus dem CGM zur Sternenentstehung, welche in Folge der Kollision erfolgt, beiträgt. In Kapitel 4 habe ich eine Stichprobe aus 234 L* Galaxien, jeweils mit der Masse der Milchstraße, aus der Kosmologischen Simulation TNG50 genutzt, um den Einfluss der globalen Begleitgalaxienpopulation auf die Eigenschaften des ausgedehnten und kalten CGM der Zentralhalos zu bestimmen. Auf der Basis der Halomasse habe ich die Galaxienhalos in Bins niedriger und hohern Masse eingeteilt. Dabei ist jeder dieser Bins wiederum unterteilt in das untere, mittlere und obere Quartil in Abhängigkeit der Anzahl der Begleitgalaxien (N_sats) im jeweiligen Halo. Nach der Bestätigung dass Begleitgalaxien in der Tat die Gasdichteprofile ihrer Zentralgalaxie beeinflussen, habe ich die Effekte von verschiedenen Populationsparametern der Begleitgalaxien auf die CGM der jeweiligen Zentralgalaxien untersucht. Meine Analyse zeigt, dass nahezu kein kaltes Gas mit der Population der Satellitengalaxien in den Halos mit der geringsten Masse assoziiert ist. Das Gas der Halos im masseärmeren Bin ist primär beeinflusst durch die stellare Masse der massereichsten Satelliten-galaxie (M_*mms), wohingegen N_sats (gefolgt von M _*mms) die Masse des kalten Gases der massereichsten Zentralhalos am signifikantesten beeinflusst hat. Unabhängig davon schien es nicht von Relevanz zu sein wie einfach das Gas von der massereichsten Satellitengalaxie abgetragen werden kann. Die Anzahl der der massereichen (M* > 10^8 M_solar) Satellitengalaxien, sowie die mit einer Galaxie assoziierten M_*mms zeigten sich als zwei der Wichtigsten Parameter um zu verstehen wie das kalte Gas von den Satellitengalaxien in den Halo transferiert wird. Im Falle von masseärmeren Galaxien scheinen sich diese in beiden Aspekten von ihren massereichen Gegenstücken zu unterscheiden und zeigen keine besondere Abhängingkeit. Diese Arbeit behandelt einige Aspekte der komplexem physikalischen Aspekte von astrophysikalischen Gasen welche die Basis für die Untersuchung des CGM bei geringen Rotverschiebungen bildet. Meine Analyse zeigt die Wichtigkeit des Kosmologischen Umfelds, die lokale Umgebung, sowie die Verschmelzungshistorie indem sie fundamentale Observablen des galaktischen CGM beeinflussen. Des weiteren habe ich herausgefunden, dass verschiedene Satelliteneigenschaften für die Beeinflussung des kalt–dichten CGM der masseärmeren und massereichen Muttergalaxien verantwortlich waren. Schließlich stellte sich heraus, dass die LG eine vielversprechendes Beispiel zum Testen und Festhalten mehrerer komplizierter Details über das CGM darstellt. KW - circumgalactic medium KW - cosmological simulations KW - local group KW - major mergers KW - satellite galaxies KW - zirkumgalaktischen Medium KW - kosmologische Computersimulationen KW - lokalen Gruppe KW - Major mergers KW - Begleitgalaxien Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-590543 ER - TY - THES A1 - Das, Samata T1 - Modelling particle acceleration in core-collapse supernova remnants inside circumstellar wind-blown bubbles T1 - Modellierung der Teilchenbeschleunigung in Kernkollaps-Supernova-Überresten innerhalb zirkumstellaren windgeblasenen Blasen N2 - Supernova remnants are considered to be the primary sources of galactic cosmic rays. These cosmic rays are assumed to be accelerated by the diffusive shock acceleration mechanism, specifically at shocks in the remnants. Particularly in the core-collapse scenario, these supernova remnant shocks expand inside the wind-blown bubbles structured by massive progenitors during their lifetime. Therefore, the complex environment of wind bubbles can influence the particle acceleration and radiation from the remnants. Further, the evolution of massive stars depends on their Zero Age Main Sequence mass, rotation, and metallicity. Consequently, the structures of the wind bubbles generated during the lifetime of massive stars should be considerably different. Hence, the particle acceleration in the core-collapse supernova remnants should vary, not only from the remnants evolving in the uniform environment but also from one another, depending on their progenitor stars. A core-collapse supernova remnant with a very massive 60 𝑀 ⊙ progenitor star has been considered to study the particle acceleration at the shock considering Bohm-like diffusion. This dissertation demonstrates the modification in particle acceleration and radiation while the remnant propagates through different regions of the wind bubble by impacts from the profiles of gas density, the temperature of the bubble and the magnetic field structure. Subsequently, in this thesis, I discuss the impacts of the non-identical ambient environment of core-collapse supernova remnants on particle spectra and the non-thermal emissions, considering 20 𝑀 ⊙ and 60 𝑀⊙ massive progenitors having different evolutionary tracks. Additionally, I also analyse the effect of cosmic ray streaming instabilities on particle spectra. To model the particle acceleration in the remnants, I have performed simulations in one-dimensional spherical symmetry using RATPaC code. The transport equation for cosmic rays and magnetic turbulence in test-particle approximation, along with the induction equation for the evolution of the large-scale magnetic field, have been solved simultaneously with the hydrodynamic equations for the expansion of remnants inside the pre-supernova circumstellar medium. The results from simulations describe that the spectra of accelerated particles in supernova remnants are regulated by density fluctuations, temperature variations, the large-scale magnetic field configuration and scattering turbulence. Although the diffusive shock acceleration mechanism at supernova remnant shock predicts the spectral index of 2 for the accelerated non-thermal particles, I have obtained the particle spectra that deviate from this prediction, in the core-collapse scenario. I have found that the particle spectral index reaches 2.5 for the supernova remnant with 60 𝑀 ⊙ progenitor when the remnant resides inside the shocked wind region of the wind bubble, and this softness persists at later evolutionary stages even with Bohm-like diffusion for accelerated particles. However, the supernova remnant with 20 𝑀 ⊙ progenitor does not demonstrate persistent softness in particle spectra from the influence of the hydrodynamics of the corresponding wind bubble. At later stages of evolution, the particle spectra illustrate softness at higher energies for both remnants as the consequence of the escape of high-energy particles from the remnants while considering the cosmic ray streaming instabilities. Finally, I have probed the emission morphology of remnants that varies depending on the progenitors, particularly in earlier evolutionary stages. This dissertation provides insight into different core-collapse remnants expanding inside wind bubbles, for instance, the calculated gamma-ray spectral index from the supernova remnant with 60 𝑀 ⊙ progenitor at later evolutionary stages is consistent with that of the observed supernova remnants expanding in dense molecular clouds. N2 - Supernova-Überreste gelten als die Hauptquellen der galaktischen kosmischen Strahlung. Diese kosmische Strahlung wird vermutlich durch den Mechanismus der diffusiven Schockbeschleunigung beschleunigt, insbesondere durch Schocks in den Überresten. Insbesondere im Szenario des Kernkollapses werden diese Supernova-Überreste innerhalb der windgeblasenen Blasen aus, die von massiven Progenitoren während ihrer Lebenszeit. Daher kann die komplexe Umgebung der Windblasen die Teilchenbeschleunigung und die Strahlung der Überreste beeinflussen. Außerdem hängt die Entwicklung von massereichen Sternen von ihrer Masse, Rotation und Metallizität in der Nullzeit der Hauptreihe ab. Folglich sollten die Strukturen der Windblasen, die während der Lebensdauer massereicher Sterne erzeugt werden, sehr unterschiedlich sein. Folglich sollte die Teilchenbeschleunigung in den Kernkollaps Supernovaüberresten nicht nur von den Überresten unterscheiden, die sich in einer einheitlichen Umgebung, sondern auch voneinander, je nach ihren Vorgängersternen. Ein Kernkollaps-Supernova-Überrest mit einem sehr massereichen 60 𝑀 ⊙ Vorläuferstern wurde betrachtet, um die Teilchenbeschleunigung am Schock unter Berücksichtigung der Bohm-ähnlichen Diffusion zu untersuchen. Diese Dissertation zeigt die Veränderung der Teilchenbeschleunigung und der Strahlung, während sich der Überrest durch verschiedene Regionen der Windblase ausbreitet, anhand der Profile der Gasdichte, der Temperatur der Blase und der Magnetfeldstruktur. Anschließend diskutiere ich in dieser Arbeit die Auswirkungen der nicht-identischen Umgebung von Supernova-Überresten auf die Teilchenspektren und die nicht-thermischen Emissionen unter Berücksichtigung von 20 𝑀 ⊙ und 60 𝑀 ⊙ massiven Vorläufern mit unterschiedlichen Entwicklungspfaden. Darüber hinaus analysiere ich auch die Auswirkungen von Instabilitäten der kosmischen Strahlung auf die Teilchenspektren. Um die Teilchenbeschleunigung in den Überresten zu modellieren, habe ich Simulationen in eindimensionaler dimensionalen sphärischen Symmetrie mit dem RATPaC-Code durchgeführt. Die Transportgleichung für kosmische Strahlung und die magnetische Turbulenz in der Testteilchen-Näherung, zusammen mit der Induktionsgleichung Induktionsgleichung für die Entwicklung des großräumigen Magnetfeldes, wurden gleichzeitig mit den hydro-dynamischen Gleichungen für die Expansion der Überreste im zirkumstellaren Medium vor der Supernova zirkumstellaren Mediums gelöst. Die Ergebnisse der Simulationen beschreiben, dass die Spektren der beschleunigten Teilchen in Supernovaüberresten durch Dichtefluktuationen, Temperaturschwankungen, die großräumige Magnetfeldkonfiguration und Streuturbulenzen reguliert werden. Obwohl der Mechanismus der diffusiven Schockbeschleunigung im Supernova-Überrest einen Spektralindex von 2 für die beschleunigten nicht-thermischen Teilchen vorhersagt, habe ich im Szenario des Kernkollapses Teilchenspektren erhalten, die von dieser Vorhersage abweichen. Ich habe herausgefunden, dass der Spektralindex der Teilchen für den Supernova-Überrest mit einem 60 𝑀 ⊙ Vorläufer 2,5 erreicht, wenn sich der Überrest in der geschockten Windregion der Windblase befindet, und diese Schwäche bleibt auch in späteren Entwicklungsstadien bestehen, selbst bei einer Bohm-ähnlichen Diffusion für beschleunigte Teilchen. Der Supernova-Überrest mit 20 𝑀 ⊙ Vorläufer zeigt jedoch keine anhaltende Weichheit in Teilchenspektren durch den Einfluss der Hydrodynamik der entsprechenden Windblase. In späteren Entwicklungsstadien zeigen die Teilchenspektren für beide Überreste eine Weichheit bei höheren Energien als Folge des Entweichens hochenergetischer Teilchen aus den Überresten unter Berücksichtigung der Instabilitäten des kosmischen Strahlenstroms. Schließlich habe ich die Emissionsmorphologie der Überreste untersucht, die je nach den Vorläufern variiert, insbesondere in früheren Entwicklungsstadien. Diese Dissertation gibt Aufschluss über verschiedene Kernkollapsüberreste, die sich in Windblasen ausdehnen. So stimmt beispielsweise der berechnete Gammastrahlen-Spektralindex des Supernova-Überrests mit 60 𝑀 ⊙ Vorläufer in späteren Entwicklungsstadien mit dem der beobachteten Supernova-Überreste überein, die sich in dichten Molekülwolken ausdehnen. KW - stellar evolution KW - wind bubble KW - supernova remnant KW - particle acceleration KW - non-thermal emission KW - nicht-thermische Emission KW - Teilchenbeschleunigung KW - Sternentwicklung KW - Supernova-Überrest KW - Windblase Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-614140 ER - TY - THES A1 - Meyer, Dominique M.-A. T1 - The circumstellar medium of massive stars Y1 - 2023 ER - TY - THES A1 - Pfrang, Konstantin Johannes T1 - Search for light primordial black holes with VERITAS using gamma γ-ray and optical observations T1 - Suche nach leichten primordialen Schwarzen Löchern mit VERITAS anhand von Gammastrahlen- und optischen Beobachtungen N2 - The Very Energetic Radiation Imaging Telescope Array System (VERITAS) is an array of four imaging atmospheric Cherenkov telescopes (IACTs). VERITAS is sensitive to very-high-energy gamma-rays in the range of 100 GeV to >30 TeV. Hypothesized primordial black holes (PBHs) are attractive targets for IACTs. If they exist, their potential cosmological impact reaches beyond the candidacy for constituents of dark matter. The sublunar mass window is the largest unconstrained range of PBH masses. This thesis aims to develop novel concepts searching for light PBHs with VERITAS. PBHs below the sublunar window lose mass due to Hawking radiation. They would evaporate at the end of their lifetime, leading to a short burst of gamma-rays. If PBHs formed at about 10^15 g, the evaporation would occur nowadays. Detecting these signals might not only confirm the existence of PBHs but also prove the theory of Hawking radiation. This thesis probes archival VERITAS data recorded between 2012 and 2021 for possible PBH signals. This work presents a new automatic approach to assess the quality of the VERITAS data. The array-trigger rate and far infrared temperature are well suited to identify periods with poor data quality. These are masked by time cuts to obtain a consistent and clean dataset which contains about 4222 hours. The PBH evaporations could occur at any location in the field of view or time within this data. Only a blind search can be performed to identify these short signals. This thesis implements a data-driven deep learning based method to search for short transient signals with VERITAS. It does not depend on the modelling of the effective area and radial acceptance. This work presents the first application of this method to actual observational IACT data. This thesis develops new concepts dealing with the specifics of the data and the transient detection method. These are reflected in the developed data preparation pipeline and search strategies. After correction for trial factors, no candidate PBH evaporation is found in the data. Thus, new constraints of the local rate of PBH evaporations are derived. At the 99% confidence limit it is below <1.07 * 10^5 pc^-3 yr^-1. This constraint with the new, independent analysis approach is in the range of existing limits for the evaporation rate. This thesis also investigates an alternative novel approach to searching for PBHs with IACTs. Above the sublunar window, the PBH abundance is constrained by optical microlensing studies. The sampling speed, which is of order of minutes to hours for traditional optical telescopes, is a limiting factor in expanding the limits to lower masses. IACTs are also powerful instruments for fast transient optical astronomy with up to O(ns) sampling. This thesis investigates whether IACTs might constrain the sublunar window with optical microlensing observations. This study confirms that, in principle, the fast sampling speed might allow extending microlensing searches into the sublunar mass window. However, the limiting factor for IACTs is the modest sensitivity to detect changes in optical fluxes. This thesis presents the expected rate of detectable events for VERITAS as well as prospects of possible future next-generation IACTs. For VERITAS, the rate of detectable microlensing events in the sublunar range is ~10^-6 per year of observation time. The future prospects for a 100 times more sensitive instrument are at ~0.05 events per year. N2 - Das Very Energetic Radiation Imaging Telescope Array System (VERITAS) ist ein Instrument mit vier atmosphärischen Cherenkov-Teleskopen (IACTs). VERITAS ist empfindlich für sehr hoch-energetische gamma-Strahlung im Bereich von 100 GeV bis >30 TeV. Hypothetische primordiale Schwarze Löcher (PBHs) sind interessante Ziele für IACTs. Falls sie existieren, könnte ihr potentieller kosmologischer Einfluss über die Möglichkeit, dass sie ein Bestandteil der dunklen Materie sind, hinausgehen. Der größte nicht eingeschränkte Bereich der PBH-Massen ist das sublunare Fenster. Das Ziel dieser Arbeit ist es, neue Konzepte für die Suche nach leichten PBHs mit VERITAS zu entwickeln. Durch die Hawking-Strahlung verlieren PBHs unterhalb des sublunaren Fensters an Masse. Am Ende ihrer Lebenszeit verdampfen diese, was einen kurzen Ausbruch an gamma-Strahlung verursacht. Falls PBHs mit ~10^15 g entstanden sind, würde sich dieser Ausbruch in der heutigen Zeit ereignen. Der Nachweis dieser Signale könnte nicht nur die Existenz von PBHs bestätigen, sondern auch die Theorie der Hawking-Strahlung beweisen. In dieser Arbeit werden VERITAS-Daten aus den Jahren 2012 bis 2021 auf mögliche PBH-Signale untersucht. Es wird ein neuer automatisierter Ansatz zur Beurteilung der Qualität der VERITAS-Daten vorgestellt. Die Array-Trigger-Rate und die ferne Infrarot-Temperatur sind gut geeignet, um Zeiträume mit schlechter Datenqualität zu identifizieren. Diese werden maskiert, um einen konsistenten Datensatz zu erhalten, der etwa 4222 Stunden umfasst. Die PBH-Verdampfungen könnten an jeder beliebigen Stelle im Sichtfeld oder zu jeder beliebigen Zeit innerhalb dieser Daten auftreten. Zur Identifizierung dieser kurzen Signale kann nur eine Blindsuche durchgeführt werden. In dieser Arbeit wird eine datengestützte, auf Deep Learning basierende Methode zur Suche nach kurzen vorübergehenden Signalen mit VERITAS implementiert. Die Methode ist nicht von der Modellierung der effektiven Fläche und der radialen Akzeptanz abhängig. Diese Arbeit präsentiert die erste Anwendung dieser Methode mit echten IACT-Beobachtungsdaten. In dieser Arbeit werden neue Konzepte entwickelt, die sich mit den Besonderheiten der Daten und der Methode befassen. Sie spiegeln sich in der entwickelten Datenvorbereitung und den Suchstrategien wider. Nach Korrektur der Versuchsfaktoren wird in den Daten kein Kandidat für PBH-Verdampfung gefunden. Daher wird die lokale Rate von PBH-Verdampfungen auf unter <1.07 * 10^5 pc^-3 yr^-1 an der 99%-Konfidenzgrenze beschränkt. Dieses Limit, welches mit dem neuen, unabhängigen Analyseansatz erreicht wurde, liegt im Bereich der bestehenden Grenzwerte für die Verdunstungsrate. In dieser Arbeit wird auch ein alternativer neuer Ansatz für die Suche nach PBHs mit IACTs untersucht. Oberhalb des sublunaren Fensters wird die Existenz von PBHs durch optische Mikrolensing-Studien eingeschränkt. Für niedrige Massen ist die Abtastgeschwindigkeit, die bei herkömmlichen optischen Teleskopen in der Größenordnung von Minuten bis Stunden liegt, ein limitierender Faktor. IACTs sind auch leistungsstarke Instrumente für die schnelle optische Astronomie mit Abtastraten von bis zu O(ns). In dieser Arbeit wird untersucht, ob IACTs das sublunare Fenster mit optischen Mikrolensing-Beobachtungen beschränken könnten. Diese Studie bestätigt, dass die schnelle Abtastgeschwindigkeit eine Ausweitung der Mikrolensing-Suche auf das sublunare Massenfenster ermöglichen könnte. Der begrenzende Faktor für IACTs ist jedoch die eingeschränkte Empfindlichkeit, um Änderungen im optischen Fluss zu detektieren. In dieser Arbeit werden die erwarteten Raten der nachweisbaren Ereignisse für VERITAS sowie für mögliche zukünftige IACTs der nächsten Generation vorgestellt. Für VERITAS beträgt die Rate der nachweisbaren Microlensing-Ereignisse im sublunaren Bereich ~10^-6 pro Jahr. Die Zukunftsaussichten für ein 100-mal empfindlicheres Instrument liegen bei ~0,05 Ereignissen pro Jahr. KW - PBH KW - dark matter KW - primordial black holes KW - microlensing KW - gamma-rays KW - deep learning KW - LSTM KW - LSTM KW - PBH KW - Dunkle Materie KW - Deep Learning KW - Gammastrahlung KW - Microlensing KW - Primordiale Schwarzen Löchern Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-587266 ER - TY - THES A1 - Giuri, Chiara T1 - VERITAS Dark Matter search in dwarf spheroidal galaxies: an extended analysis T1 - VERITAS-Suche nach dunkler Materie in sphäroidischen Zwerggalaxien: eine erweiterte Analyse” N2 - In the last century, several astronomical measurements have supported that a significant percentage (about 22%) of the total mass of the Universe, on galactic and extragalactic scales, is composed of a mysterious ”dark” matter (DM). DM does not interact with the electromagnetic force; in other words it does not reflect, absorb or emit light. It is possible that DM particles are weakly interacting massive particles (WIMPs) that can annihilate (or decay) into Standard Model (SM) particles, and modern very- high-energy (VHE; > 100 GeV) instruments such as imaging atmospheric Cherenkov telescopes (IACTs) can play an important role in constraining the main properties of such DM particles, by detecting these products. One of the most privileged targets where to look for DM signal are dwarf spheroidal galaxies (dSphs), as they are expected to be high DM-dominated objects with a clean, gas-free environment. Some dSphs could be considered as extended sources, considering the angular resolution of IACTs; their angu- lar resolution is adequate to detect extended emission from dSphs. For this reason, we performed an extended-source analysis, by taking into account in the unbinned maximum likelihood estimation both the energy and the angular extension dependency of observed events. The goal was to set more constrained upper limits on the velocity-averaged cross-section annihilation of WIMPs with VERITAS data. VERITAS is an array of four IACTs, able to detect γ-ray photons ranging between 100 GeV and 30 TeV. The results of this extended analysis were compared against the traditional spectral analysis. We found that a 2D analysis may lead to more constrained results, depending on the DM mass, channel, and source. Moreover, in this thesis, the results of a multi-instrument project are presented too. Its goal was to combine already published 20 dSphs data from five different experiments, such as Fermi-LAT, MAGIC, H.E.S.S., VERITAS and HAWC, in order to set upper limits on the WIMP annihilation cross-section in the widest mass range ever reported. N2 - Im letzten Jahrhundert haben verschiedene mehrere astronomische Messungen gezeigt, dass ein erheblicher Prozentsatz (etwa 22 %) der Gesamtmasse des Universums auf galaktischer und extragalaktischer Ebene aus einer geheimnisvollen ”dunklen” Materie (DM) besteht. DM interagiert nicht mit der elektromagnetischen Kraft und reflektiert, absorbiert oder emittiert daher kein Licht. Es ist möglich, dass es sich bei DM-Teilchen um schwach wechselwirkende massive Teilchen (engl. weakly interacting massive particles, WIMPs) handelt, die in Teilchen des Standardmodells (SM) annihilieren (oder zerfallen) können. Indem sie diese Produkte nachweisen, können moderne Detektoren für sehr hoch energetische (engl. very-high-energy, VHE; 100 GeV) Gammastrahlung, wie zum Beispiel bildgebende atmosphärische Cherenkov-Teleskope (engl. imaging atmospheric Cherenkov telescopes, IACTs), eine wichtige Rolle bei der Bestimmung der Haupteigenschaften solcher DM-Teilchen spielen. Eines der am besten geeignetsten Ziele für die Suche nach DM-Signalen sind sphäroidische Zwerggalaxien (engl. dwarf spheroidal galaxies, dSphs), da diese stark DM-dominierte Objekte mit einer gasfreien Umgebung sind. Die Winkelauflösung von IACTs ist ausreichend, um ausgedehnte Emission von dSphs zu entdecken. Aus diesem Grund haben wir eine Analyse dieser Quellen durchgeführt, indem wir in der unbinned Maximum-Likelihood-Schätzung sowohl die Energie als auch die Abhängigkeit der Winkelausdehnung der beobachteten Gammastrahlung berücksichtigt haben. Das Ziel war es, mit Hilfe der VERITAS-Daten genauere Obergrenzen für den geschwindigkeitsgemittelten Annihilationsquerschnitt von WIMPs zu bestimmen. VERITAS ist eine Anordnung von vier IACTs, die Gammastrahlen im Bereich von 100 GeV bis 30 TeV detektieren können. Die Ergebnisse dieser erweiterten Analyse wurden mit der traditionellen Spektralanalyse verglichen. Es zeigte sich, dass je nach DM-Masse, Kanal und Quelle eine 2D-Analyse zu aussagekräftigeren Ergebnissen führen kann. Darüber hinaus werden in dieser Arbeit auch die Ergebnisse eines Multi-Instrumenten-Projekts vorgestellt. Das Ziel war es, die bereits veröffentlichte 20 dSphs-Datensätze von Fermi-LAT, MAGIC, H.E.S.S., VERITAS und HAWC zu kombinieren, um obere Grenzwerte für den WIMP-Annihilationsquerschnitt im breitesten jemals veröffentlichten Massenbereich zu bestimmen. KW - Dark Matter KW - data analysis KW - Cherenkov telescopes KW - dwarf spheroidal galaxies KW - Dunkle Materie KW - Datenanalyse KW - Cherenkov-Teleskope KW - sphäroidische Zwerggalaxien Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-575869 ER - TY - THES A1 - Maiti, Snehanshu T1 - Magnetohydrodynamic turbulence and cosmic ray transport T1 - Magnetohydrodynamische Turbulenz und Transport kosmischer Strahlung N2 - The first part of the thesis studies the properties of fast mode in magneto hydro-dynamic (MHD) turbulence. 1D and 3D numerical simulations are carried out to generate decaying fast mode MHD turbulence. The injection of waves are carried out in a collinear and isotropic fashion to generate fast mode turbulence. The properties of fast mode turbulence are analyzed by studying their energy spectral density, 2D structure functions and energy decay/cascade time. The injection wave vector is varied to study the dependence of the above properties on the injection wave vectors. The 1D energy spectrum obtained for the velocity and magnetic fields has 𝐸 (𝑘) ∝ 𝑘−2. The 2D energy spectrum and 2D structure functions in parallel and perpendicular directions shows that fast mode turbulence generated is isotropic in nature. The cascade/decay rate of fast mode MHD turbulence is proportional to 𝑘−0.5 for different kinds of wave vector injection. Simulations are also carried out in 1D and 3D to compare balanced and imbalanced turbulence. The results obtained shows that while 1D imbalanced turbulence decays faster than 1D balanced turbulence, there is no difference in the decay of 3D balanced and imbalanced turbulence for the current resolution of 512 grid points. "The second part of the thesis studies cosmic ray (CR) transport in driven MHD turbulence and is strongly dependent on it’s properties. Test particle simulations are carried out to study CR interaction with both total MHD turbulence and decomposed MHD modes. The spatial diffusion coefficients and the pitch angle scattering diffusion coefficients are calculated from the test particle trajectories in turbulence. The results confirms that the fast modes dominate the CR propagation, whereas Alfvén, slow modes are much less efficient with similar pitch angle scattering rates. The cross field transport on large and small scales are investigated next. On large/global scales, normal diffusion is observed and the diffusion coefficient is suppressed by 𝑀𝜁𝐴 compared to the parallel diffusion coefficients, with 𝜁 closer to 4 in Alfvén modes than that in total turbulence as theoretically expected. For the CR transport on scales smaller than the turbulence injection scale 𝐿, both the local and global magnetic reference frames are adopted. Super diffusion is observed on such small scales in all the cases. Particularly, CR transport in Alfvén modes show clear Richardson diffusion in the local reference frame. The diffusion transition smoothly from the Richardson’s one with index 1.5 to normal diffusion as particle’s mean free path decreases from 𝜆∥ ≫ 𝐿 to 𝜆∥ ≪ 𝐿. These results have broad applications to CRs in various astrophysical environments". N2 - Der erste Teil der Arbeit untersucht die Eigenschaften des schnellen Modus in magnetohydrodynamischen (MHD) Turbulenzen. Es werden numerische 1D- und 3D-Simulationen durchgeführt, um eine abklingende Fast-Mode-MHD-Turbulenz zu erzeugen. Die Injektion von Wellenvektoren wird kollinear und isotrop durchgeführt, um Fast-Mode-Turbulenzen zu erzeugen. Die Eigenschaften der Fast-Mode-Turbulenz werden durch die Untersuchung ihrer Energie-Spektraldichte, 2D-Strukturfunktionen und Energieabfall-/Kaskadenzeit analysiert. Die Injektionswellenvektoren werden in verschiedenen Simulationen für unterschiedliche Arten der Injektion variiert, um die Abhängigkeit der oben genannten Eigenschaften von den Injektionswellenvektoren zu untersuchen. Das für die Geschwindigkeits- und Magnetfelder erhaltene 1D-Energiespektrum hat E(k) ∝ k−2. Das 2D-Energiespektrum und die 2D-Strukturfunktionen in parallelen und senkrechten Richtungen zeigen, dass die erzeugte Fast-Mode-Turbulenz von Natur aus isotrop ist. Die Kaskaden-/Zerfallsrate der Fast-Mode-MHD-Turbulenz ist proportional zu k−0.5 für verschiedene Arten der Wellenvektorinjektion. Es werden auch Simulationen in 1D und 3D durchgeführt, um ausgeglichene und unausgeglichene Turbulenzen zu vergleichen. Die Ergebnisse zeigen, dass eine unausgewogene 1D-Turbulenz schneller abklingt als eine ausgeglichene 1D-Turbulenz, während es bei der derzeitigen Auflösung von 512 Gitterpunkten keinen Unterschied im Abklingen von ausgeglichener und unausgewogener 3D-Turbulenz gibt. Der zweite Teil der Arbeit untersucht den Transport kosmischer Strahlung (CR) in angetriebenen MHD-Turbulenzen und ist stark von deren Eigenschaften abhängig. Es werden Testpartikelsimulationen durchgeführt, um die Wechselwirkung von kosmischer Strahlung sowohl mit der gesamten MHD-Turbulenz als auch mit zerlegten MHD-Moden zu untersuchen. Aus den Flugbahnen der Testteilchen in der Turbulenz werden die räumlichen Diffusionskoeffizienten und die Diffusionskoeffizienten für die Streuung im Neigungswinkel berechnet. Die Ergebnisse bestätigen, dass die schnellen Moden die CR-Ausbreitung dominieren, während Alfv´en langsame Moden bei ähnlichen Neigungswinkelstreuungsraten viel weniger effizient sind. Der Querfeldtransport auf großen und kleinen Skalen wird als nächstes untersucht. Auf großen/globalen Skalen wird normale Diffusion beobachtet und der Diffusionskoeffizient wird durch MζA im Vergleich zu den parallelen Diffusionskoeffizienten unterdrückt, wobei ζin Alfv´en-Moden näher bei 4 liegt als in der Gesamtturbulenz, wie theoretisch erwartet. Für den CR-Transport auf Skalen, die kleiner sind als die Turbulenzinjektionsskala L, werden sowohl der lokale als auch der globale magnetische Bezugsrahmen verwendet. Auf solch kleinen Skalen wird in allen Fällen Superdiffusion beobachtet. Insbesondere der CRTransport in Alfv’en-Moden zeigt eine deutliche Richardson-Diffusion im lokalen Bezugssystem. Die Diffusion geht fließend von der Richardson-Diffusion mit dem Index 1,5 zur normalen Diffusion über, wenn die mittlere freie Weglänge der Teilchen, λ∥, von λ∥ ≫ L auf λ∥ ≪ L abnimmt. Diese Ergebnisse haben eine breite Anwendung auf CRs in verschiedenen astrophysikalischen Umgebungen. KW - isotropic fast mode turbulence KW - cascade rate KW - Alfv´en mode MHD turbulence KW - cosmic ray diffusion KW - efficient scattering KW - mean free path KW - Richardson Superdiffusion KW - Alfv´en-Modus MHD-Turbulenz KW - Richardson-Superdiffusion KW - Kaskadenrate KW - Diffusion kosmischer Strahlung KW - effiziente Streuung KW - Isotroper schneller Modus Turbulenzen KW - bedeuten freie Bahn Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-589030 ER - TY - THES A1 - Rikani, Albano T1 - Modeling global human migration dynamics under climate change N2 - International migration has been an increasing phenomenon during the past decades and has involved all the regions of the globe. Together with fertility and mortality rates, net migration rates represent the components that fully define the demographic evolution of the population in a country. Therefore, being able to capture the patterns of international migration flows and to produce projections of how they might change in the future is of relevant importance for demographic studies and for designing policies informed on the potential scenarios. Existing forecasting methods do not account explicitly for the main drivers and processes shaping international migration flows: existing migrant communities at the destination country, termed diasporas, would reduce the costs of migration and facilitate the settling for new migrants, ultimately producing a positive feedback; accounting for the heterogeneity in the type of migration flows, e.g. return and transit Ćows, becomes critical in some specific bilateral migration channels; in low- to middle- income countries economic development could relax poverty constraint and result in an increase of emigration rates. Economic conditions at both origin and destination are identified as major drivers of international migration. At the same time, climate change impacts have already appeared on natural and human-made systems such as the economic productivity. These economic impacts might have already produced a measurable effect on international migration flows. Studies that provide a quantification of the number of migration moves that might have been affected by climate change are usually specific to small regions, do not provide a mechanistic understanding of the pathway leading from climate change to migration and restrict their focus to the effective induced flows, disregarding the impact that climate change might have had in inhibiting other flows. Global climate change is likely to produce impacts on the economic development of the countries during the next decades too. Understanding how these impacts might alter future global migration patterns is relevant for preparing future societies and understanding whether the response in migration flows would reduce or increase population's exposure to climate change impacts. This doctoral research aims at investigating these questions and fill the research gaps outlined above. First, I have built a global bilateral international migration model which accounts explicitly for the diaspora feedback, distinguishes between transit and return flows, and accounts for the observed non-linear effects that link emigration rates to income levels in the country of origin. I have used this migration model within a population dynamic model where I account also for fertility and mortality rates, producing hindcasts and future projections of international migration flows, covering more than 170 countries. Results show that the model reproduces past patterns and trends well. Future projections highlight the fact that,depending on the assumptions regarding future evolution of income levels and between-country inequality, migration at the end of the century might approach net zero or be still high in many countries. The model, parsimonious in the explanatory variables that includes, represents a versatile tool for assessing the impacts of different socioeconomic scenarios on international migration. I consider then a counterfactual past without climate change impacts on the economic productivity. By prescribing these counterfactual economic conditions to the migration model I produce counterfactual migration flows for the past 30 years. I compare the counterfactual migration flows to factual ones, where historical economic conditions are used to produce migration flows. This provides an estimation of the recent international migration flows attributed to climate change impacts. Results show that a counterfactual world without climate change would have seen less migration globally. This effect becomes larger if I consider separately the increase and decrease in migration moves: a Ągure of net change in the migration flows is not representative of the effective magnitude of the climate change impact on migration. Indeed, in my results climate change produces a divergent effect on richer and poorer countries: by slowing down the economic development, climate change might have reduced international mobility from and to countries of the Global South, and increased it from and to richer countries in the Global North. I apply the same methodology to a scenario of future 3℃ global warming above pre-industrial conditions. I Ąnd that climate change impacts, acting by reorganizing the relative economic attractiveness of destination countries or by affecting the economic growth in the origin, might produce a substantial effect in international migration flows, inhibiting some moves and inducing others. Overall my results suggest that climate change might have had and might have in the future a significant effect on global patterns of international migration. It also emerges clearly that, for a comprehensive understanding of the effects of climate change on international migration, we need to go beyond net effects and consider separately induced and inhibited flows. N2 - Die internationale Migration ist in den letzten Jahrzehnten ein zunehmendes Phänomen, das alle Regionen der Welt betrifft. Die wirtschaftlichen Bedingungen sowohl im Herkunftsals auch im Zielland gelten als wichtige Triebkräfte der internationalen Migration. Die wirtschaftlichen Auswirkungen des Klimawandels haben sich in der Vergangenheit bereits messbar auf die internationalen Migrationsströme ausgewirkt, und künftige Auswirkungen werden dies wahrscheinlich ebenfalls tun. Diese Dissertation zielt darauf ab, dieses Thema zu untersuchen. Zunächst habe ich ein globales bilaterales internationales Migrationsmodell entwickelt, das explizit die wichtigsten Triebkräfte der internationalen Migration berücksichtigt. Ich habe dieses Migrationsmodell für die Erstellung retrospektiver und zukünftiger Projektionen der internationalen Migrationsströme weltweit verwendet. Die Ergebnisse zeigen, dass das Modell die Muster und Trends der Vergangenheit gut wiedergibt, und die Zukunftsprojektionen verdeutlichen, dass je nach den Annahmen über die künftige Entwicklung des Einkommensniveaus und der Ungleichheit zwischen den Ländern die Migration gegen Null gehen oder in vielen Ländern bis zum Ende des Jahrhunderts noch hoch sein könnte. Anschließend betrachte ich eine kontrafaktische Vergangenheit, in der der Klimawandel keine Auswirkungen auf die wirtschaftliche Produktivität hat. Ich vergleiche die kontrafaktischen Migrationsströme mit den faktischen Strömen. Die Ergebnisse zeigen, dass es in einer kontrafaktischen Welt ohne Klimawandel weniger globale Migration gegeben hätte. Dieser Effekt wird sogar noch größer, wenn ich den Anstieg und den Rückgang der Migrationsströme getrennt betrachte. Ich wende dieselbe Methodik auf ein Szenario einer zukünftigen globalen Erwärmung von 3℃ über den vorindustriellen Bedingungen an. Ich komme zu dem Schluss, dass die Folgen des Klimawandels erhebliche Auswirkungen auf die internationalen Migrationsströme haben könnten, indem sie die relative wirtschaftliche Attraktivität der Zielländer verändern oder das Wirtschaftswachstum in den Herkunftsländern beeinträchtigen, wodurch einige Wanderungen verhindert und andere ausgelöst werden. Insgesamt deuten meine Ergebnisse darauf hin, dass der Klimawandel möglicherweise erhebliche Auswirkungen auf die globalen Muster der internationalen Migration hatte und auch weiterhin haben wird. Es wird auch deutlich, dass wir, um die Auswirkungen des Klimawandels auf die internationale Migration vollständig zu verstehen, über die Nettoeffekte hinausgehen und die induzierten und gehemmten Ströme getrennt betrachten müssen. KW - climate change KW - international migration KW - macroeconomic impacts KW - international migration modeling KW - Klimawandel KW - internationale Migration KW - Modellierung der internationalen Migration KW - makroökonomische Folgen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-583212 ER - TY - THES A1 - Dixit, Sneha T1 - Tension-induced conformational changes of the Piezo protein-membrane nano-dome N2 - Mechanosensation is a fundamental biological process that provides the basis for sensing touch and pain as well as for hearing and proprioception. A special class of ion-channel proteins known as mechanosensitive proteins convert the mechanical stimuli into electrochemical signals to mediate this process. Mechanosensitive proteins undergo conformational changes in response to mechanical force, which eventually leads to the opening of the proteins' ion channel. Mammalian mechanosensitive proteins remained a long sought-after mystery until 2010 when a family of two proteins - Piezo1 and Piezo2 - was identifed as mechanosensors [1]. The cryo-EM structures of Piezo1 and Piezo2 protein were resolved in the last years and reveal a propeller-shaped homotrimer with 114 transmembrane helices [2, 3, 4, 5]. The protein structures are curved and have been suggested to deform the surrounding membrane into a nano-dome, which mechanically responds to membrane tension resulting from external forces [2]. In this thesis, the conformations of membrane-embedded Piezo1 and Piezo2 proteins and their tension-induced conformational changes are investigated using molecular dynamics simulations. Our coarse-grained molecular dynamics simulations show that the Piezo proteins induce curvature in the surrounding membrane and form a stable protein-membrane nano-dome in the tensionless membrane. These membrane-embedded Piezo proteins, however, adopt substantially less curved conformations in our simulations compared to the cryo-EM structures solved in detergent micelles, which agrees with recent experimental investigations of the overall Piezo nano-dome shape in membrane vesicles [6, 7, 8]. At high membrane tension, the Piezo proteins attain nearly planar conformations in our simulations. Our systematic investigation of Piezo proteins under different membrane tensions indicates a half-maximal conformational response at membrane tension values rather close to the experimentally suggested values of Piezo activation [9, 10]. In addition, our simulations indicate a widening of the Piezo1 ion channel at high membrane tension, which agrees with the channel widening observed in recent nearly flattened cryo-EM structures of Piezo1 in small membrane vesicles [11]. In contrast, the Piezo2 ion channel does not respond to membrane tension in our simulations. These different responses of the Piezo1 and Piezo2 ion channels in our simulations are in line with patch-clamp experiments, in which Piezo1, but not Piezo2, was shown to be activated by membrane tension alone [12]. N2 - Mechanosensitivität ist ein fundamentaler biologischer Prozess, der sowohl dem Empfinden von Berührung und Schmerz als auch dem Hören und der Propriozeption zu Grunde liegt. Ein Klasse von Ionenkanalproteinen, die mechanosensitiven Proteine, wandeln dazu mechanische Reize in elektrochemische Signal um. Mechanische Kräfte führen zu Konformationsänderungen dieser mechanosensitiven Proteine, die dann wiederum die Öffnung der Ionenkanäle in den Proteinen bewirken. Die mechanosensitiven Proteine von Säugetieren wurden über viele Jahre gesucht und 2010 schließlich als Familie zweier Proteine – Piezo1 und Piezo2 – entdeckt. Die cryo-EM-Strukturen dieser Proteine wurden in den letzten Jahren entschlüsselt und zeigen einen propellerförmigen Homotrimer, der 114 Transmembranhelizes aufweist. Die Proteinstrukturen sind gekrümmt, was zu dem Vorschlag führte, dass die Proteine die umgebende Membran in eine Nanokuppel überführen, die mechanisch auf durch äußere Krafte induzierte Membranspannungen reagiert. In dieser Doktorarbeit werden die Konformationen von Piezo1 und Piezo2 in Membranen und die spannungsinduzierten Konformationsänderungen dieser Proteine in Molekulardynamiksimulationen untersucht. Unsere vergröberten Molekulardynamiksimulationen zeigen, dass die Piezo-Proteine zu Membrankrümmung und einer stabilen Protein-Membran-Nanokuppel führen. Die Piezo-Proteine nehmen in Membranen jedoch deutlich schwächer gekrümmte Konformationen an als in den aus Detergenzien bestehen Mizellen der cryo-EM-Strukturen, was mit jüngsten experimentellen Befunden zur Form der Piezo-Nanokuppel in Membranvesikeln übereinstimmt. Bei hohen Membranspannungen nehmen die Piezo-Proteine nahezu flache Konformationen in unseren Simulationen an. Unsere systematische Untersuchung von Piezo-Proteinen bei verschiedenen Membranspannungen zeigen halbmaximale Konformationsänderungen bei Werten der Membranspannung, die nahe bei experimentell gefundenen Aktivierungsspannungswerten von Piezo1 liegen. Zudem ist in unseren Simulationen eine Aufweitung des Ionenkanals von Piezo1 bei hohen Membranspannungen zu sehen, die mit Ionenkanalkonformationen in jüngsten, nahezu flachen cryo-EM-Strukuren von Piezo1 in kleinen Membranvesikeln übereinstimmt. In Gegensatz dazu zeigt der Ionenkanal von Piezo2 keine Konformationsänderungen bei hohen Membranspannungen. Diese unterschiedlichen Reaktionen der Ionenkanäle von Piezo1 und Piezo2 wiederum stimmen mit Befunden aus Patch-Clamp-Experimenten überein, in denen Piezo1, aber nicht Piezo2, alleinig durch Membranspannung aktiviert werden konnte. KW - Piezo1 KW - Piezo2 KW - Mechanosensitive proteins KW - Membrane tension KW - MD simulations KW - Piezo1 KW - Piezo2 KW - Mechanosensitiven Proteine KW - Membranspannung KW - MD-Simulationen Y1 - 2023 ER - TY - THES A1 - Kairaliyeva, Talmira T1 - Surfactant adorption at liquid interfaces measured by drop and bubble experiments BT - Considertation ot the surfactant mass balance in a single drop Y1 - 2023 ER - TY - THES A1 - Kanehira, Yuya T1 - Versatile DNA origami based SERS substrates for spectroscopic applications Y1 - 2023 ER - TY - BOOK A1 - Mientus, Lukas A1 - Klempin, Christiane A1 - Nowak, Anna A1 - Wyss, Corinne A1 - Aufschnaiter, Claudia von A1 - Faix, Ann-Christin A1 - te Poel, Kathrin A1 - Wahbe, Nadia A1 - Pieper, Martin A1 - Höller, Katharina A1 - Kallenbach, Lea A1 - Förster, Magdalena A1 - Redecker, Anke A1 - Dick, Mirjam A1 - Holle, Jörg A1 - Schneider, Edina A1 - Rehfeldt, Daniel A1 - Brauns, Sarah A1 - Abels, Simone A1 - Ferencik-Lehmkuhl, Daria A1 - Fränkel, Silvia A1 - Frohn, Julia A1 - Liebsch, Ann-Catherine A1 - Pech, Detlef A1 - Schreier, Pascal A1 - Jessen, Moiken A1 - Großmann, Uta A1 - Skintey, Lesya A1 - Voerkel, Paul A1 - Vaz Ferreira, Mergenfel A. A1 - Zimmermann, Jan-Simon A1 - Buddeberg, Magdalena A1 - Henke, Vanessa A1 - Hornberg, Sabine A1 - Völschow, Yvette A1 - Warrelmann, Julia-Nadine A1 - Malek, Jennifer A1 - Tinnefeld, Anja A1 - Schmidt, Peggy A1 - Bauer, Tobias A1 - Jänisch, Christopher A1 - Spitzer, Lisa A1 - Franken, Nadine A1 - Degeling, Maria A1 - Preisfeld, Angelika A1 - Meier, Jana A1 - Küth, Simon A1 - Scholl, Daniel A1 - Vogelsang, Christoph A1 - Watson, Christina A1 - Weißbach, Anna A1 - Kulgemeyer, Christoph A1 - Oetken, Mandy A1 - Gorski, Sebastian A1 - Kubsch, Marcus A1 - Sorge, Stefan A1 - Wulff, Peter A1 - Fellenz, Carolin D. A1 - Schnell, Susanne A1 - Larisch, Cathleen A1 - Kaiser, Franz A1 - Knott, Christina A1 - Reimer, Stefanie A1 - Stegmüller, Nathalie A1 - Boukrayâa Trabelsi, Kathrin A1 - Schißlbauer, Franziska A1 - Lemberger, Lukas A1 - Barth, Ulrike A1 - Wiehl, Angelika A1 - Rogge, Tim A1 - Böhnke, Anja A1 - Dietz, Dennis A1 - Großmann, Leroy A1 - Wienmeister, Annett A1 - Zoppke, Till A1 - Jiang, Lisa A1 - Grünbauer, Stephanie A1 - Ostersehlt, Dörte A1 - Peukert, Sophia A1 - Schäfer, Christoph A1 - Löbig, Anna A1 - Bröll, Leena A1 - Brandt, Birgit A1 - Breuer, Meike A1 - Dausend, Henriette A1 - Krelle, Michael A1 - Andersen, Gesine A1 - Falke, Sascha A1 - Kindermann-Güzel, Kristin A1 - Körner, Katrina A1 - Lottermoser, Lisa-Marie A1 - Pügner, Kati A1 - Sonnenburg, Nadine A1 - Akarsu, Selim A1 - Rechl, Friederike A1 - Gadinger, Laureen A1 - Heinze, Lena A1 - Wittmann, Eveline A1 - Franke, Manuela A1 - Lachmund, Anne-Marie A1 - Böttger, Julia A1 - Hannover, Bettina A1 - Behrendt, Renata A1 - Conty, Valentina A1 - Grundmann, Stephanie A1 - Ghassemi, Novid A1 - Opitz, Ben A1 - Brämer, Martin A1 - Gasparjan, David A1 - Sambanis, Michaela A1 - Köster, Hilde A1 - Lücke, Martin A1 - Nordmeier, Volkhard A1 - Schaal, Sonja A1 - Haberbosch, Maximilian A1 - Meissner, Maren A1 - Schaal, Steffen A1 - Brüchner, Melanie A1 - Riehle, Tamara A1 - Leopold, Bengta Marie A1 - Gerlach, Susanne A1 - Rau-Patschke, Sarah A1 - Skorsetz, Nina A1 - Weber, Nadine A1 - Damköhler, Jens A1 - Elsholz, Markus A1 - Trefzger, Thomas A1 - Lewek, Tobias A1 - Borowski, Andreas ED - Mientus, Lukas ED - Klempin, Christiane ED - Nowak, Anna T1 - Reflexion in der Lehrkräftebildung BT - Empirisch – Phasenübergreifend – Interdisziplinär T3 - Potsdamer Beiträge für Lehrkräftebildung und Bildungsforschung N2 - Reflexion ist eine Schlüsselkategorie für die professionelle Entwicklung von Lehrkräften, welche als Ausbildungsziel in den Bildungsstandards für die Lehrkräftebildung verankert ist. Eine Verstetigung universitär geprägter Forschung und Modellierung in der praxisnahen Anwendung im schulischen Kontext bietet Potentiale nachhaltiger Professionalisierung. Die Stärkung reflexionsbezogener Kompetenzen durch Empirie und Anwendung scheint eine phasenübergreifende Herausforderung der Lehrkräftebildung zu sein, die es zu bewältigen gilt. Ziele des Tagungsbandes Reflexion in der Lehrkräftebildung sind eine theoretische Schärfung des Konzeptes „Reflexive Professionalisierung“ und der Austausch über Fragen der Einbettung wirksamer reflexionsbezogener Lerngelegenheiten in die Lehrkräftebildung. Forschende und Lehrende der‚ drei Phasen (Studium, Referendariat sowie Fort- und Weiterbildung) der Lehrkräftebildung stellen Lehrkonzepte und Forschungsprojekte zum Thema Reflexion in der Lehrkräftebildung vor und diskutieren diese. Gemeinsam mit Teilnehmenden aller Phasen und von verschiedenen Standorten der Lehrkräftebildung werden zukünftige Herausforderungen identifiziert und Lösungsansätze herausgearbeitet. T3 - Potsdamer Beiträge zur Lehrkräftebildung und Bildungsforschung - 4 KW - Reflexion KW - Lehrkräftebildung KW - Reflexionskompetenz KW - Reflexivität KW - Feedback KW - Reflection KW - Teacher Education KW - Reflection Skills KW - Reflexivity KW - Feedback Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-591717 SN - 978-3-86956-566-8 SN - 2626-3556 SN - 2626-4722 IS - 4 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Nowak, Anna T1 - Untersuchung der Qualität von Selbstreflexionstexten zum Physikunterricht BT - Entwicklung des Reflexionsmodells REIZ JF - Studien zum Physik- und Chemielernen N2 - Reflexion wird als notwendig für die professionelle Entwicklung von Lehrer:innen und die Verbesserung von Unterricht angesehen, wenngleich aus theoretischer Sicht große Uneinigkeit über den Begriff selbst, den Reflexionsprozess und die damit verbundenen Kompetenzen herrscht. Ziel dieser Arbeit war die Entwicklung, Untersuchung und Weiterentwicklung eines Reflexionsmodells mit einem theoriebasierten, klaren Konzept des Reflexionsprozesses und einem passenden Anspruch an die Reflexionsleistung der Reflektierenden. Grundlage für die empirische Untersuchung waren N = 132 Selbstreflexionstexte von N = 22 Studierenden aus dem Praxissemester Physik. Zur Codierung der Texte wurden vier mittels qualitativer Inhaltsanalyse entwickelte Manuale angewandt. Mit quantitativen Methoden wurden Zusammenhänge zwischen strukturellen Elementen, Begründungen, Inhalten und dem Qualitätsmerkmal Reflexionstiefe überprüft. Es zeigte sich ein "Überhang an Negativität": negative Bewertungen, negative Reflexionsauslöser und negative Inhalte hängen signifikant positiv mit größerer Reflexionstiefe zusammen. Auf Grundlage der empirischen Ergebnisse wurde das Reflexionsmodell mit externaler und internaler Zielorientierung (REIZ) entwickelt. Zudem wurde darauf aufbauend eine Definition für Reflexionstiefe in vier Argumentationsclustern formuliert. Für die Lehrkräftebildung wird der in REIZ dargestellte differenzierte Ansatz der Zielorientierung von Reflexion empfohlen. KW - Reflexion KW - Reflexionsmodell KW - Reflexionstiefe KW - Reflexionsqualität Y1 - 2023 SN - 978-3-8325-5739-3 U6 - https://doi.org/10.30819/5739 SN - 1614-8967 VL - 371 PB - Logos CY - Berlin ER - TY - THES A1 - Mientus, Lukas T1 - Reflexion und Reflexivität T1 - Reflection and reflexivity BT - Befunde reflexionsbezogener Dispositionen BT - findings of reflection-related amplifiers and filters N2 - Reflexion gilt in der Lehrkräftebildung als eine Schlüsselkategorie der professionellen Entwicklung. Entsprechend wird auf vielfältige Weise die Qualität reflexionsbezogener Kompetenzen untersucht. Eine Herausforderung hierbei kann in der Annahme bestehen, von der Analyse schriftlicher Reflexionen unmittelbar auf die Reflexivität einer Person zu schließen, da Reflexion stets kontextspezifisch als Abbild reflexionsbezogener Argumentationsprozesse angesehen werden sollte und reflexionsbezogenen Dispositionen unterliegt. Auch kann die Qualität einer Reflexion auf mehreren Dimensionen bewertet werden, ohne quantifizierbare, absolute Aussagen treffen zu können. Daher wurden im Rahmen einer Physik-Videovignette N = 134 schriftliche Fremdreflexionen verfasst und kontextspezifische reflexionsbezogene Dispositionen erhoben. Expert*innen erstellten theoriegeleitet Qualitätsbewertungen zur Breite, Tiefe, Kohärenz und Spezifität eines jeden Reflexionstextes. Unter Verwendung computerbasierter Klassifikations- und Analyseverfahren wurden weitere Textmerkmale erhoben. Mittels explorativer Faktorenanalyse konnten die Faktoren Qualität, Quantität und Deskriptivität gefunden werden. Da alle konventionell eingeschätzten Qualitätsbewertungen durch einen Faktor repräsentiert wurden, konnte ein maximales Qualitätskorrelat kalkuliert werden, zu welchem jede schriftliche Fremdreflexion im Rahmen der vorliegenden Vignette eine computerbasiert bestimmbare Distanz aufweist. Diese Distanz zum maximalen Qualitätskorrelat konnte validiert werden und kann die Qualität der schriftlichen Reflexionen unabhängig von menschlichen Ressourcen quantifiziert repräsentieren. Abschließend konnte identifiziert werden, dass ausgewählte Dispositionen in unterschiedlichem Maße mit der Reflexionsqualität zusammenhängen. So konnten beispielsweise bezogen auf das Physik-Fachwissen minimale Zusammenhänge identifiziert werden, wohingegen Werthaltung sowie wahrgenommene Unterrichtsqualität eng mit der Qualität einer schriftlichen Reflexion in Verbindung stehen können. Es wird geschlussfolgert, dass reflexionsbezogene Dispositionen moderierenden Einfluss auf Reflexionen nehmen können. Es wird empfohlen bei der Erhebung von Reflexion mit dem Ziel der Kompetenzmessung ausgewählte Dispositionen mit zu erheben. Weiter verdeutlicht diese Arbeit die Möglichkeit, aussagekräftige Quantifizierungen auch in der Analyse komplexer Konstrukte vorzunehmen. Durch computerbasierte Qualitätsabschätzungen können objektive und individuelle Analysen und differenzierteres automatisiertes Feedback ermöglicht werden. N2 - Reflection is considered as a key category of professional development in teacher education. Thus, the quality of reflection-related performance has been studied in a variety of ways. To derive teacher's reflection-related personal Pedagogical Content Knowledge (PCK) from the analysis of a written reflection (reflection-related enacted PCK) seems to be challenging. The enactment of reflection-related personal PCK is context-specific and should be seen as a manifestation under the influence of Amplifiers & Filters. Also, it is difficult to make quantifiable statements of reasoning quality in a written reflection without using stage models or categorical scoring. Therefore, N = 134 (preservice) physics teachers wrote a reflection text in the context of a video vignette and answered items related to context-specific reflection-related dispositions. Experts rated the quality of each reflection text according to the breadth, depth, coherence, and specificity. Using computer-based classification and analysis, additional text features were extracted. An exploratory factor analysis was used to reduce date to the factors quality, quantity, and descriptiveness of a written reflection. Cause experts’ quality ratings were represented by just one factor, a maximum quality-correlate for the present vignette was calculated. Each written reflection was determined a distance to this maximum computer-based. This quality index was validated and can represent the quality of the written reflections in a quantified way without the need of human expertise. Finally, it could be identified that selected Amplifiers & Filters are related to the reflection quality. For example, minimal correlations could be identified with respect to physics content knowledge, whereas values and perceived teaching quality can be closely related to the quality of a written reflection. It is concluded that reflection-related Amplifiers & Filters can have a measurable influence on reflection-related enacted PCK. It is recommended to include measurements of Amplifiers & Filters in each research of reflection with the aim of measuring competence. Further, this work illustrates the possibility of meaningful quantification even in the analysis of complex constructs. Computer-based quality assessments can enable objective and individualized analyses and more differentiated automated feedback. KW - Reflexion KW - Reflexivität KW - Physikdidaktik KW - pedagogical content knowledge KW - refined consensus model KW - machine learning Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-610003 ER - TY - JOUR A1 - Mientus, Lukas A1 - Nowak, Anna A1 - Wulff, Peter A1 - Borowski, Andreas ED - Mientus, Lukas ED - Klempin, Christiane ED - Nowak, Anna T1 - Unterrichtsanalyse und Reflexion BT - Ableitung eines Workshopangebots für die zweite und dritte Phase der Lehrkräftebildung JF - Reflexion in der Lehrkräftebildung: Empirisch – Phasenübergreifend – Interdisziplinär (Potsdamer Beiträge zur Lehrerbildung und Bildungsforschung ; 4) N2 - Schulpraktische Phasen stellen eine bedeutende praxisnahe Lerngelegenheit im Lehramtsstudium dar, da sie Raum für umfangreiche Reflexionen der eigenen Lernerfahrung bieten. Das im Studium erworbene theoretisch-formale Wissen steht hierbei dem praktischen Wissen und Können gegenüber. Mit der professionellen Entwicklung im Referendariat, besonders im Kompetenzbereich des Unterrichtens, kann geschlussfolgert werden, dass sich eine Reflexion über eher fachliche Aspekte unter den Studierenden im Referendariat auf eine Reflexion über eher überfachliche und pädagogische Aspekte weitet. Infolge der Analyse von N = 55 schriftlichen Fremdreflexionen von angehenden Physiklehrkräften aus Studium und Referendariat konnte diese Hypothese für den Bereich der Unterrichtsanalyse und -reflexion unterstützt werden. Weiter wurde aus der Videovignette ein Workshopangebot für Lehrkräfte der zweiten und dritten Phase der Lehrkräftebildung entwickelt, erprobt und evaluiert. KW - Reflexion KW - Unterrichtsanalyse KW - Referendariat KW - Fortbildung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-632005 SN - 978-3-86956-566-8 SN - 2626-3556 SN - 2626-4722 IS - 4 SP - 445 EP - 452 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Wulff, Peter A1 - Mientus, Lukas A1 - Nowak, Anna A1 - Borowski, Andreas T1 - KI-basierte Auswertung von schriftlichen Unterrichtsreflexionen im Fach Physik und automatisierte Rückmeldung JF - PSI-Potsdam: Ergebnisbericht zu den Aktivitäten im Rahmen der Qualitätsoffensive Lehrerbildung (2019-2023) (Potsdamer Beiträge zur Lehrerbildung und Bildungsforschung ; 3) N2 - Für die Entwicklung professioneller Handlungskompetenzen angehender Lehrkräfte stellt die Unterrichtsreflexion ein wichtiges Instrument dar, um Theoriewissen und Praxiserfahrungen in Beziehung zu setzen. Die Auswertung von Unterrichtsreflexionen und eine entsprechende Rückmeldung stellt Forschende und Dozierende allerdings vor praktische wie theoretische Herausforderungen. Im Kontext der Forschung zu Künstlicher Intelligenz (KI) entwickelte Methoden bieten hier neue Potenziale. Der Beitrag stellt überblicksartig zwei Teilstudien vor, die mit Hilfe von KI-Methoden wie dem maschinellen Lernen untersuchen, inwieweit eine Auswertung von Unterrichtsreflexionen angehender Physiklehrkräfte auf Basis eines theoretisch abgeleiteten Reflexionsmodells und die automatisierte Rückmeldung hierzu möglich sind. Dabei wurden unterschiedliche Ansätze des maschinellen Lernens verwendet, um modellbasierte Klassifikation und Exploration von Themen in Unterrichtsreflexionen umzusetzen. Die Genauigkeit der Ergebnisse wurde vor allem durch sog. Große Sprachmodelle gesteigert, die auch den Transfer auf andere Standorte und Fächer ermöglichen. Für die fachdidaktische Forschung bedeuten sie jedoch wiederum neue Herausforderungen, wie etwa systematische Verzerrungen und Intransparenz von Entscheidungen. Dennoch empfehlen wir, die Potenziale der KI-basierten Methoden gründlicher zu erforschen und konsequent in der Praxis (etwa in Form von Webanwendungen) zu implementieren. N2 - For the development of professional competencies in pre-service teachers, reflection on teaching experiences is proposed as an important tool to link theoretical knowledge and practice. However, evaluating reflections and providing appropriate feedback poses challenges of both theoretical and practical nature to researchers and educators. Methods associated with artificial intelligence research offer new potentials to discover patterns in complex datasets like reflections, as well as to evaluate these automatically and create feedback. In this article, we provide an overview of two sub-studies that investigate, using artificial intelligence methods such as machine learning, to what extent an evaluation of reflections of pre-service physics teachers based on a theoretically derived reflection model and automated feedback are possible. Across the sub-studies, different machine learning approaches were used to implement model-based classification and exploration of topics in reflections. Large language models in particular increase the accuracy of the results and allow for transfer to other locations and disciplines. However, entirely new challenges arise for educational research in relation to large language models, such as systematic biases and lack of transparency in decisions. Despite these uncertainties, we recommend further exploring the potentials of artificial intelligence-based methods and implementing them consistently in practice (for example, in the form of web applications). KW - Künstliche Intelligenz KW - Maschinelles Lernen KW - Natural Language Processing KW - Reflexion KW - Professionalisierung KW - artificial intelligence KW - machine learning KW - natural language processing KW - reflexion KW - professionalization Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-616363 SN - 978-3-86956-568-2 SN - 2626-3556 SN - 2626-4722 IS - 3 SP - 103 EP - 115 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - JOUR A1 - Mientus, Lukas A1 - Klempin, Christiane A1 - Nowak, Anna T1 - Reflexion in der Lehrkräftebildung: Empirisch – Phasenübergreifend – Interdisziplinär JF - Reflexion in der Lehrkräftebildung: Empirisch – Phasenübergreifend – Interdisziplinär (Potsdamer Beiträge zur Lehrerbildung und Bildungsforschung ; 4) N2 - Reflexion – unhinterfragt eines der wichtigsten Worte im Kontext der Lehrkräftebildung. Fest verankert in den bundesdeutschen Bildungsstandards sind in Forschung und Lehre die Suche nach Evidenz und die Unterstützung (angehender) Lehrkräfte ständiger Antrieb unzähliger Akteur:innen aller Phasen der Lehrkräftebildung. Wenngleich begriff liche Unklarheiten die Kommunikation von Forschungsergebnissen nicht immer intuitiv und die Unterstützung in der Lehre nicht immer praktikabel werden lassen, besteht Einigkeit darüber, dass ein Diskurs zur reflexiven Professionalisierung von Lehrkräften geführt werden muss. Aus diesem Grund veranstalteten die beiden QLB-Projekte PSI-Potsdam der Universität Potsdam und K2teach der Freien Universität Berlin vom 5. bis 7. Oktober 2022 die Onlinetagung „Reflexion in der Lehrkräftebildung. Empirisch – Phasenübergreifend – Interdisziplinär“. Ausgehend von den verschiedensten Fachdisziplinen diskutierten Akteur:innen aller Phasen der Lehrkräftebildung unterschiedlicher Standorte Ergebnisse empirischer Studien und Erfahrungen aus der Arbeit mit (angehenden) Lehrkräften. Beiträge der Tagung sind in diesem Buch festgehalten und sind als Momentaufnahme eines sich ständig entwickelnden Themenfelds zu verstehen. Forschende und Lehrende haben mit dieser Momentaufnahme die Möglichkeit, Eindrücke für die eigene Arbeit aufzunehmen und weiterzuentwickeln. KW - Reflexion KW - Reflexivität KW - Lehrkräftebildung KW - Tagung KW - Sammelband Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-618890 SN - 978-3-86956-566-8 SN - 2626-3556 SN - 2626-4722 IS - 4 SP - 13 EP - 18 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Sharma, Anjali T1 - Optical manipulation of multi-responsive microgels N2 - This dissertation focuses on the understanding of the optical manipulation of microgels dispersed in aqueous solution of azobenzene containing surfactant. The work consists of three parts where each part is a systematic investigation of the (1) photo-isomerization kinetics of the surfactant in complex with the microgel polymer matrix, (2) light driven diffusiosmosis (LDDO) in microgels and (3) photo-responsivity of microgel on complexation with spiropyran. The first part comprises three publications where the first one [P1] investigates the photo-isomerization kinetics and corresponding isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged polymers or micro sized polymer networks to understand the structural response of such photo-sensitive complexes. We report that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in an aqueous solution. The surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration. This, along with the inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates, pushes the isomer-ratio to a higher trans-isomer concentration for all irradiation wavelengths. The second publication [P2] combines experimental results and non-adiabatic dynamic simulations for the same surfactant molecules embedded in the micelles with absorption spectroscopy measurements of micellar solutions to uncover the reasons responsible for the slowdown in photo induced trans → cis azobenzene isomerization at concentrations higher than the critical micelle concentration (CMC). The simulations reveal a decrease of isomerization quantum yields for molecules inside the micelles and observes a reduction of extinction coefficients upon micellization. These findings explain the deceleration of the trans → cis switching in micelles of the azobenzene-containing surfactants. Finally, the third publication [P3] focusses on the kinetics of adsorption and desorption of the same surfactant within anionic microgels in the dark and under continuous irradiation. Experimental data demonstrate, that microgels can serve as a selective absorber of the trans isomers. The interaction of the isomers with the gel matrix induces a remotely controllable collapse or swelling on appropriate irradiation wavelengths. Measuring the kinetics of the microgel size response and knowing the exact isomer composition under light exposure, we calculate the adsorption rate of the trans-isomers. The second part comprises two publications. The first publication [P4] reports on the phenomenon of light-driven diffusioosmotic (DO) long-range attractive and repulsive interactions between micro-sized objects, whose range extends several times the size of microparticles and can be adjusted to point towards or away from the particle by varying irradiation parameters such as intensity or wavelength of light. The phenomenon is fueled by the aforementioned photosensitive surfactant. The complex interaction of dynamic exchange of isomers and photo-isomerization rate yields to relative concentrations gradients of the isomers in the vicinity of micro-sized object inducing a local diffusioosmotic (DO) flow thereby making a surface act as a micropump. The second publication [P5] exclusively aims the visualization and investigation of the DO flows generated from microgels by using small tracer particles. Similar to micro sized objects, the flow is able to push adjacent tracers over distances several times larger than microgel size. Here we report that the direction and the strength of the l-LDDO depends on the intensity, irradiation wavelength and the amount of surfactant adsorbed by the microgel. For example, the flow pattern around a microgel is directed radially outward and can be maintained quasi-indefinitely under exposure at 455 nm when the trans:cis ratio is 2:1, whereas irradiation at 365 nm, generates a radially transient flow pattern, which inverts at lower intensities. Lastly, the third part consists of one publication [P6] which, unlike the previous works, reports on the study of the kinetics of photo- and thermo-switching of a new surfactant namely, spiropyran, upon exposure with light of different wavelengths and its interaction with p(NIPAM-AA) microgels. The surfactant being an amphiphile, switches between its ring closed spiropyran (SP) form and ring open merocyanine (MC) form which results in a change in the hydrophilic–hydrophobic balance of the surfactant as MC being a zwitterionic form along with the charged head group, generates three charges on the molecule. Therefore, the MC form of the surfactant is more hydrophilic than in the case of the neutral SP state. Here, we investigate the initial shrinkage of the gel particles via charge compensation on first exposure to SP molecules which results from the complex formation of the molecules with the gel matrix, triggering them to become photo responsive. The size and VPTT of the microgels during irradiation is shown to be a combination of heating up of the solution during light absorption by the surfactant (more pronounced in the case of UV irradiation) and the change in the hydrophobicity of the surfactant. N2 - Diese Dissertation befasst sich mit dem Verständnis der optischen Manipulation von Mikrogelen, die in einer wässrigen Lösung eines azobenzol-haltigen Tensides mit einer kationischen Kopfgruppe, welches licht-sensitiv ist, dispergiert sind. Die Arbeit besteht aus drei Teilen, wobei jeder Teil eine systematische Untersuchung der (1) Photoisomerisierungskinetik des Tensids im Komplex mit der Mikrogel-Polymermatrix, (2) einer daraus induzierten lokalen lichtinduzierten Diffusiosmose (eng. local light driven diffusio osmosis, l-LDDO) in der Nähe von Mikrogelen und (3) der photo-responsivität von Mikrogelen bei Komplexierung mit Spiropyran darstellt. Der erste Teil umfasst drei Veröffentlichungen, von denen die erste [P1] die Photoisomerisierungskinetik und die entsprechende Isomerenzusammensetzung im photostationären Zustand dieses Tensids in Komplex mit Polyelektrolyten oder mikroskopisch kleinen Polymernetzwerken untersucht. Dabei verläuft die trans-cis-Kinetik in einem Polymerkomplex langsamer als in reinen wässrigen Lösungen, da innerhalb der Polyelektrolytnetzwerken eine erhöhte Mizellisierungstendez des licht-schaltbare Tensides vorliegt. In einer Mizelle ist die geometrische Molekülstrukturänderung vom trans- zum cis-Isomer kinetisch durch sterische Hindernisse von dicht gepackten benachbarten Tensiden gehemmt und führt dazu, dass das Isomerverhältnis bei allen Bestrahlungswellenlängen zu höheren trans-Isomerkonzentration im photostationären Zustand verschoben sind. Diese experimentellen Ergebnisse werden in der zweiten Veröffentlichung [P2] mittels nicht-adiabatische dynamische Simulationen unterstützt, wobei die Ergebnisse zeigen, dass Moleküle, welche einer Mizelle aggregiert sind, eine Abnahme der Isomerisierungsquantenausbeute mit einer gleichzeitigen Verringerung der Extinktionskoeffizienten die Verlangsamung der Kinetik bestätigen. Die dritte Veröffentlichung [P3] befasst sich mit der Kinetik des dynamischen Austauschverhalten desselben Tensids in anionischen Mikrogelen im Dunkeln aber auch unter kontinuierlicher Beleuchtung. Dabei kann die Größe des Mikrogeles bei geeigneten Beleuchtungswellenlängen zu einem lichtgesteuerten Kollaps oder Schwellen des Mikrogeles vollständig reversible induziert werden. Möglich ist dies, weil die Mikrogele als selektiver Absorber für die trans-Isomere dienen. Durch die Messung der Kinetik der Größenänderung des Mikrogels und die Kenntnis der kinetischen Daten aus den vorigen Publikationen wurde die Adsorptionsrate des trans-Isomere zum Mikrogel berechnet. Der zweite Teil umfasst zwei Veröffentlichungen. Der erste [P4] berichtet über das tiefere Verständnis der lokalen lichtinduzierten Diffusioosmose (l-LDDO) an verschiedenen Mikroobjekten, die abstoßende oder anziehende Ströme induzieren. Triebkraft dieses Mechanismus ist eine Verschiebung des cis-Isomerengleichgewichtes bei Beleuchtung und dessen resultierenden Konzentrationsgradienten der Isomere in der Nähe dieser Objekte, welche durch eine komplexe Wechselwirkung zwischen dem dynamischen Austausch von beiden Isomeren und einer unterschiedlichen Photo-Isomerisierungsrate an der Grenzfläche im Vergleich zum Kontinuum vorliegen. Stärke des l-LDDO hängt von typischen Lichtparameter (Intensität und Wellenlänge) und der Größe und Oberfläche der Mikropartikels ab. Unter geeigneten Bedingungen (hohe Lichtintensität) kann fast jede Oberfläche als Mikropumpe wirken. Die zweite Publikation [P5] befasst sich mit der Visualisierung und Untersuchung des l-LDDO von Mikrogelen unter Verwendung von kleinen Tracerpartikel. Ähnlich wie bei mikroskopisch kleinen Objekten können auch hier benachbarte Tracer über Entfernungen um ein Vielfaches größer als die Größe des Mikrogels bewegt werden. Die Richtung und die Stärke des l-LDDO hängt von der Intensität, der Wellenlänge der Bestrahlung und der Menge des vom Mikrogel adsorbierten Tensids ab. So ist beispielsweise das Strömungsmuster um ein Mikrogel radial nach außen gerichtet und kann bei einer Bestrahlung mit blauem Licht (455 nm) quasi unbegrenzt aufrechterhalten werden, während eine Bestrahlung mit UV-Licht (365 nm) mit niedrigen Intensitäten ein temporäres radial verlaufendes Strömungsmuster zum Mikrogel erzeugt. Schließlich besteht der dritte und letzte Teil dieser Dissertation aus einer Veröffentlichung [P6], die im Gegensatz zu den vorangegangenen Arbeiten über die Untersuchung der Kinetik des Photo- und Thermoschaltens eines Spiropyran basierten Tensides mit einer kationischen Kopfgruppe bei der Bestrahlung mit Licht verschiedener Wellenlängen und seiner Wechselwirkung mit Mikrogelen berichtet. Das Tensid wechselt zwischen seiner ringgeschlossenen Spiropyranform (SP) und seiner ringoffenen Merocyaninform (MC), was zu einer Änderung des hydrophilen/hydrophoben Gleichgewichts des Tensids führt. Die anfängliche Schrumpfung der Mikrogele bei der ersten Exposition gegenüber SP-Molekülen wurde untersucht, die auf einen Ladungsausgleich durch die Komplexierung der Moleküle mit der Gelmatrix zurückzuführen ist, wodurch das Mikrogel lichtempfindlich wird. Darüber hinaus wird gezeigt, dass die Temperatur des Größen- und Volumenphasenübergangs der Mikrogele unter Beleuchtung eine Kombination aus dem lichtinduzierten Austauschverhalten und der Erwärmung der Lösung durch die Lichtabsorption des Tensids ist, die unter UV-Bestrahlung besonders ausgeprägt ist. KW - optical manipulation KW - microgel KW - kinetics KW - surfactant KW - photo-isomerization KW - polymer KW - azobenzene KW - spectroscopy KW - microscopy Y1 - 2023 ER - TY - THES A1 - Smirnov, Artem T1 - Understanding the dynamics of the near-earth space environment utilizing long-term satellite observations T1 - Verständnis der Dynamik der erdnahen Weltraumumgebung mit Hilfe von Langzeit-Satellitenbeobachtungen N2 - The near-Earth space environment is a highly complex system comprised of several regions and particle populations hazardous to satellite operations. The trapped particles in the radiation belts and ring current can cause significant damage to satellites during space weather events, due to deep dielectric and surface charging. Closer to Earth is another important region, the ionosphere, which delays the propagation of radio signals and can adversely affect navigation and positioning. In response to fluctuations in solar and geomagnetic activity, both the inner-magnetospheric and ionospheric populations can undergo drastic and sudden changes within minutes to hours, which creates a challenge for predicting their behavior. Given the increasing reliance of our society on satellite technology, improving our understanding and modeling of these populations is a matter of paramount importance. In recent years, numerous spacecraft have been launched to study the dynamics of particle populations in the near-Earth space, transforming it into a data-rich environment. To extract valuable insights from the abundance of available observations, it is crucial to employ advanced modeling techniques, and machine learning methods are among the most powerful approaches available. This dissertation employs long-term satellite observations to analyze the processes that drive particle dynamics, and builds interdisciplinary links between space physics and machine learning by developing new state-of-the-art models of the inner-magnetospheric and ionospheric particle dynamics. The first aim of this thesis is to investigate the behavior of electrons in Earth's radiation belts and ring current. Using ~18 years of electron flux observations from the Global Positioning System (GPS), we developed the first machine learning model of hundreds-of-keV electron flux at Medium Earth Orbit (MEO) that is driven solely by solar wind and geomagnetic indices and does not require auxiliary flux measurements as inputs. We then proceeded to analyze the directional distributions of electrons, and for the first time, used Fourier sine series to fit electron pitch angle distributions (PADs) in Earth's inner magnetosphere. We performed a superposed epoch analysis of 129 geomagnetic storms during the Van Allen Probes era and demonstrated that electron PADs have a strong energy-dependent response to geomagnetic activity. Additionally, we showed that the solar wind dynamic pressure could be used as a good predictor of the PAD dynamics. Using the observed dependencies, we created the first PAD model with a continuous dependence on L, magnetic local time (MLT) and activity, and developed two techniques to reconstruct near-equatorial electron flux observations from low-PA data using this model. The second objective of this thesis is to develop a novel model of the topside ionosphere. To achieve this goal, we collected observations from five of the most widely used ionospheric missions and intercalibrated these data sets. This allowed us to use these data jointly for model development, validation, and comparison with other existing empirical models. We demonstrated, for the first time, that ion density observations by Swarm Langmuir Probes exhibit overestimation (up to ~40-50%) at low and mid-latitudes on the night side, and suggested that the influence of light ions could be a potential cause of this overestimation. To develop the topside model, we used 19 years of radio occultation (RO) electron density profiles, which were fitted with a Chapman function with a linear dependence of scale height on altitude. This approximation yields 4 parameters, namely the peak density and height of the F2-layer and the slope and intercept of the linear scale height trend, which were modeled using feedforward neural networks (NNs). The model was extensively validated against both RO and in-situ observations and was found to outperform the International Reference Ionosphere (IRI) model by up to an order of magnitude. Our analysis showed that the most substantial deviations of the IRI model from the data occur at altitudes of 100-200 km above the F2-layer peak. The developed NN-based ionospheric model reproduces the effects of various physical mechanisms observed in the topside ionosphere and provides highly accurate electron density predictions. This dissertation provides an extensive study of geospace dynamics, and the main results of this work contribute to the improvement of models of plasma populations in the near-Earth space environment. N2 - Die erdnahe Weltraumumgebung ist ein hochkomplexes System, das aus mehreren Regionen und Partikelpopulationen besteht, die für den Satellitenbetrieb gefährlich sind. Die in den Strahlungsgürteln und dem Ringstrom gefangenen Teilchen können bei Weltraumwetterereignissen aufgrund der tiefen dielektrischen und oberflächlichen Aufladung erhebliche Schäden an Satelliten verursachen. Näher an der Erde liegt eine weitere wichtige Region, die Ionosphäre, die die Ausbreitung von Funksignalen verzögert und die Navigation und Positionsbestimmung beeinträchtigen kann. Als Reaktion auf Fluktuationen der solaren und geomagnetischen Aktivität können sowohl die Populationen der inneren Magnetosphäre als auch der Ionosphäre innerhalb von Minuten bis Stunden drastische und plötzliche Veränderungen erfahren, was eine Herausforderung für die Vorhersage ihres Verhaltens darstellt. Angesichts der zunehmenden Abhängigkeit unserer Gesellschaft von der Satellitentechnologie ist ein besseres Verständnis und eine bessere Modellierung dieser Populationen von größter Bedeutung. In den letzten Jahren wurden zahlreiche Raumsonden gestartet, um die Dynamik von Partikelpopulationen im erdnahen Weltraum zu untersuchen, was diesen in eine datenreiche Umgebung verwandelt hat. Um aus der Fülle der verfügbaren Beobachtungen wertvolle Erkenntnisse zu gewinnen, ist der Einsatz fortschrittlicher Modellierungstechniken unabdingbar, und Methoden des maschinellen Lernens gehören zu den leistungsfähigsten verfügbaren Ansätzen. Diese Dissertation nutzt langfristige Satellitenbeobachtungen, um die Prozesse zu analysieren, die die Teilchendynamik antreiben, und schafft interdisziplinäre Verbindungen zwischen Weltraumphysik und maschinellem Lernen, indem sie neue hochmoderne Modelle der innermagnetosphärischen und ionosphärischen Teilchendynamik entwickelt. Das erste Ziel dieser Arbeit ist es, das Verhalten von Elektronen im Strahlungsgürtel und Ringstrom der Erde zu untersuchen. Unter Verwendung von ~18 Jahren Elektronenflussbeobachtungen des Global Positioning System (GPS) haben wir das erste maschinelle Lernmodell des Elektronenflusses im mittleren Erdorbit (MEO) entwickelt, das ausschließlich durch Sonnenwind und geomagnetische Indizes gesteuert wird und keine zusätzlichen Flussmessungen als Eingaben benötigt. Anschließend analysierten wir die Richtungsverteilungen der Elektronen und verwendeten zum ersten Mal Fourier-Sinus-Reihen, um die Elektronen-Stellwinkelverteilungen (PADs) in der inneren Magnetosphäre der Erde zu bestimmen. Wir führten eine epochenübergreifende Analyse von 129 geomagnetischen Stürmen während der Van-Allen-Sonden-Ära durch und zeigten, dass die Elektronen-PADs eine starke energieabhängige Reaktion auf die geomagnetische Aktivität haben. Außerdem konnten wir zeigen, dass der dynamische Druck des Sonnenwindes als guter Prädiktor für die PAD-Dynamik verwendet werden kann. Anhand der beobachteten Abhängigkeiten haben wir das erste PAD-Modell mit einer kontinuierlichen Abhängigkeit von L, der magnetischen Ortszeit (MLT) und der Aktivität erstellt und zwei Techniken entwickelt, um die Beobachtungen des äquatornahen Elektronenflusses aus Daten mit niedrigem Luftdruck mit Hilfe dieses Modells zu rekonstruieren. Das zweite Ziel dieser Arbeit ist die Entwicklung eines neuen Modells der Topside-Ionosphäre. Um dieses Ziel zu erreichen, haben wir Beobachtungen von fünf der meistgenutzten Ionosphärenmissionen gesammelt und diese Datensätze interkalibriert. So konnten wir diese Daten gemeinsam für die Modellentwicklung, die Validierung und den Vergleich mit anderen bestehenden empirischen Modellen nutzen. Wir haben zum ersten Mal gezeigt, dass die Ionendichtebeobachtungen von Swarm-Langmuir-Sonden in niedrigen und mittleren Breiten auf der Nachtseite eine Überschätzung (bis zu ~40-50%) aufweisen, und haben vorgeschlagen, dass der Einfluss leichter Ionen eine mögliche Ursache für diese Überschätzung sein könnte. Zur Entwicklung des Oberseitenmodells wurden 19 Jahre lang Elektronendichteprofile aus der Radio-Okkultation (RO) verwendet, die mit einer Chapman-Funktion mit einer linearen Abhängigkeit der Skalenhöhe von der Höhe angepasst wurden. Aus dieser Näherung ergeben sich 4 Parameter, nämlich die Spitzendichte und die Höhe der F2-Schicht sowie die Steigung und der Achsenabschnitt des linearen Trends der Skalenhöhe, die mit Hilfe von neuronalen Feedforward-Netzwerken (NN) modelliert wurden. Das Modell wurde sowohl anhand von RO- als auch von In-situ-Beobachtungen umfassend validiert und übertrifft das Modell der Internationalen Referenz-Ionosphäre (IRI). Unsere Analyse zeigte, dass die größten Abweichungen des IRI-Modells von den Daten in Höhen von 100-200 km über der F2-Schichtspitze auftreten. Das entwickelte NN-basierte Ionosphärenmodell reproduziert die Auswirkungen verschiedener physikalischer Mechanismen, die in der Topside-Ionosphäre beobachtet werden, und liefert sehr genaue Vorhersagen der Elektronendichte. Diese Dissertation bietet eine umfassende Untersuchung der Dynamik in der Geosphäre, und die wichtigsten Ergebnisse dieser Arbeit tragen zur Verbesserung der Modelle von Plasmapopulationen in der erdnahen Weltraumumgebung bei. KW - Ionosphere KW - radiation belts KW - ring current KW - space physics KW - empirical modeling KW - machine learning KW - gradient boosting KW - neural networks KW - Ionosphäre KW - empirische Modellierung KW - Gradient Boosting KW - maschinelles Lernen KW - neuronale Netze KW - Strahlungsgürtel KW - Ringstrom KW - Weltraumphysik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-613711 ER - TY - THES A1 - Stoll, Andreas T1 - Advanced spectroscopic instruments enabled by integrated optics N2 - The aim of this work is the study of silica Arrayed Waveguide Gratings (AWGs) in the context of applications in astronomy. The specific focus lies on the investigation of the feasibility and technology limits of customized silica AWG devices for high resolution near-infrared spectroscopy. In a series of theoretical and experimental studies, AWG devices of varying geometry, foot-print and spectral resolution are constructed, simulated using a combination of a numerical beam propagation method and Fraunhofer diffraction and fabricated devices are characterized with respect to transmission efficiency, spectral resolution and polarization sensitivity. The impact of effective index non-uniformities on the performance of high-resolution AWG devices is studied numerically. Characterization results of fabricated devices are used to extrapolate the technology limits of the silica platform. The important issues of waveguide birefringence and defocus aberration are discussed theoretically and addressed experimentally by selection of an appropriate aberration-minimizing anastigmatic AWG layout structure. The drawbacks of the anastigmatic AWG geometry are discussed theoretically. From the results of the experimental studies, it is concluded that fabrication-related phase errors and waveguide birefringence are the primary limiting factors for the growth of AWG spectral resolution. It is shown that, without post-processing, the spectral resolving power is phase-error-limited to R < 40, 000 and, in the case of unpolarized light, birefringence-limited to R < 30, 000 in the AWG devices presented in this work. Necessary measures, such as special waveguide geometries and post-fabrication phase error correction are proposed for future designs. The elimination of defocus aberration using an anastigmatic AWG geometry is successfully demonstrated in experiment. Finally, a novel, non-planar dispersive in-fibre waveguide structure is proposed, discussed and studied theoretically. N2 - Das Ziel der vorliegenden Arbeit ist die Untersuchung von Arrayed Waveguide Gratings (AWGs) auf SiO2-Basis im Kontext von Anwendungen in der Astronomie. Der besondere Fokus liegt auf der Untersuchung der Machbarkeit und der technologischen Grenzen von spezialisierten AWGs für die hochauflösende Nahinfrarot-Spektroskopie. In einer Reihe von theoretischen und experimentellen Studien werden AWGs unterschiedlicher Geometrie, Größe und spektraler Auflösung konstruiert, unter Verwendung einer numerischen Beam-Propagation-Methode (BPM) und Fraunhofer-Beugung simuliert und hinsichtlich Effizienz, spektraler Auflösung und Polarisationsempfindlichkeit charakterisiert. Der Einfluss von Variationen des effektiven Brechungsindex auf die Leistung von hochauflösenden AWGs wird numerisch untersucht. Mit hergestellten AWGs gewonnene Messergebnisse werden verwendet, um die technologischen Grenzen der SiO2-Plattform zu extrapolieren. Die relevanten Probleme der Polarisationsempfindlichkeit und der in kanonischen Rowland-Geometrien auftretenden Defokusaberration werden theoretisch diskutiert und experimentell durch die Auswahl einer geeigneten aberrationsminimierenden AWG-Struktur angegangen. Die Nachteile anastigmatischer AWGs werden theoretisch diskutiert. Aus den Ergebnissen der experimentellen Studien wird geschlossen, dass herstellungsbedingte Phasenfehler und Wellenleiter-Doppelbrechung die primären begrenzenden Faktoren für die Erhöhung der AWG-Spektralauflösung sind. Es wird gezeigt, dass das spektrale Auflösungsvermögen der in dieser Arbeit präsentierten AWGs ohne Phasenfehlerkorrektur auf R < 40, 000 und durch Doppelbrechung auf R < 30, 000 im Fall unpolarisierten Lichtes begrenzt ist. Notwendige Maßnahmen wie spezielle Wellenleitergeometrien und Phasenfehlerkorrektur nach der Herstellung werden für zukünftige AWG-Designs empfohlen. Die Eliminierung von Defokussierungsfehlern unter Verwendung einer anastigmatischen AWG-Geometrie wird erfolgreich im Experiment demonstriert. Schließlich wird eine neuartige, in eine optische Faser eingebettete, nicht-planare dispersive Wellenleiterstruktur vorgeschlagen, diskutiert und theoretisch untersucht. KW - Astrophotonics KW - Integrated spectrograph KW - planar lightwave circuit KW - arrayed waveguide grating KW - silica-on-silicon KW - Astrophotonik KW - integrierter Spektrograph KW - planare Lichtwellenleiter KW - Siliziumdioxid-auf-Silizium Y1 - 2022 ER - TY - THES A1 - Späker, Oliver C. T1 - Structure-property-function relationships in the cornea of Limulus polyphemus Y1 - 2022 ER - TY - JOUR A1 - Fritsch, Daniel T1 - Revisiting the Cu-Zn disorder in kesterite type Cu2ZnSnSe4 employing a novel approach to hybrid functional calculations JF - Applied Sciences : open access journal N2 - In recent years, the search for more efficient and environmentally friendly materials to be employed in the next generation of thin film solar cell devices has seen a shift towards hybrid halide perovskites and chalcogenide materials crystallising in the kesterite crystal structure. Prime examples for the latter are Cu2ZnSnS4, Cu2ZnSnSe4, and their solid solution Cu2ZnSn(SxSe1-x)(4), where actual devices already demonstrated power conversion efficiencies of about 13 %. However, in their naturally occurring kesterite crystal structure, the so-called Cu-Zn disorder plays an important role and impacts the structural, electronic, and optical properties. To understand the influence of Cu-Zn disorder, we perform first-principles calculations based on density functional theory combined with special quasirandom structures to accurately model the cation disorder. Since the electronic band gaps and derived optical properties are severely underestimated by (semi)local exchange and correlation functionals, supplementary hybrid functional calculations have been performed. Concerning the latter, we additionally employ a recently devised technique to speed up structural relaxations for hybrid functional calculations. Our calculations show that the Cu-Zn disorder leads to a slight increase in the unit cell volume compared to the conventional kesterite structure showing full cation order, and that the band gap gets reduced by about 0.2 eV, which is in very good agreement with earlier experimental and theoretical findings. Our detailed results on structural, electronic, and optical properties will be discussed with respect to available experimental data, and will provide further insights into the atomistic origin of the disorder-induced band gap lowering in these promising kesterite type materials. KW - Cu2ZnSnSe4 KW - CZTSe KW - chalcogenide KW - kesterite KW - Cu-Zn disorder KW - density KW - functional theory KW - hybrid functional KW - special quasirandom structure Y1 - 2022 U6 - https://doi.org/10.3390/app12052576 SN - 2076-3417 VL - 12 IS - 5 PB - MDPI CY - Basel ER - TY - THES A1 - Velk, Natalia T1 - Investigation of the interaction of lysozyme with poly(l-lysine)/hyaluronic acid multilayers BT - Fluorescence and ATR-FTIR study Y1 - 2022 ER - TY - JOUR A1 - Teichmann, Erik A1 - Lewandowski, Heather J. A1 - Alemani, Micol T1 - Investigating students’ views of experimental physics in German laboratory classes JF - Physical Review Physics Education Research N2 - There is a large variety of goals instructors have for laboratory courses, with different courses focusing on different subsets of goals. An often implicit, but crucial, goal is to develop students’ attitudes, views, and expectations about experimental physics to align with practicing experimental physicists. The assessment of laboratory courses upon this one dimension of learning has been intensively studied in U.S. institutions using the Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS). However, there is no such an instrument available to use in Germany, and the influence of laboratory courses on students views about the nature of experimental physics is still unexplored at German-speaking institutions. Motivated by the lack of an assessment tool to investigate this goal in laboratory courses at German-speaking institutions, we present a translated version of the E-CLASS adapted to the context at German-speaking institutions. We call the German version of the E-CLASS, the GE-CLASS. We describe the translation process and the creation of an automated web-based system for instructors to assess their laboratory courses. We also present first results using GE-CLASS obtained at the University of Potsdam. A first comparison between E-CLASS and GE-CLASS results shows clear differences between University of Potsdam and U.S. students’ views and beliefs about experimental physics. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevPhysEducRes.18.010135 SN - 1554-9178 VL - 18 SP - 010135-1 EP - 010135-17 PB - APS CY - College Park, Maryland, United States ET - 1 ER - TY - JOUR A1 - Cestnik, Rok A1 - Pikovsky, Arkady T1 - Hierarchy of exact low-dimensional reductions for populations of coupled oscillators JF - Physical review letters N2 - We consider an ensemble of phase oscillators in the thermodynamic limit, where it is described by a kinetic equation for the phase distribution density. We propose an Ansatz for the circular moments of the distribution (Kuramoto-Daido order parameters) that allows for an exact truncation at an arbitrary number of modes. In the simplest case of one mode, the Ansatz coincides with that of Ott and Antonsen [Chaos 18, 037113 (2008)]. Dynamics on the extended manifolds facilitate higher-dimensional behavior such as chaos, which we demonstrate with a simulation of a Josephson junction array. The findings are generalized for oscillators with a Cauchy-Lorentzian distribution of natural frequencies. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevLett.128.054101 SN - 0031-9007 SN - 1079-7114 VL - 128 IS - 5 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Sarabadani, Jalal A1 - Metzler, Ralf A1 - Ala-Nissila, Tapio T1 - Driven polymer translocation into a channel: Isoflux tension propagation theory and Langevin dynamics simulations JF - Physical Review Research N2 - Isoflux tension propagation (IFTP) theory and Langevin dynamics (LD) simulations are employed to study the dynamics of channel-driven polymer translocation in which a polymer translocates into a narrow channel and the monomers in the channel experience a driving force fc. In the high driving force limit, regardless of the channel width, IFTP theory predicts τ ∝ f βc for the translocation time, where β = −1 is the force scaling exponent. Moreover, LD data show that for a very narrow channel fitting only a single file of monomers, the entropic force due to the subchain inside the channel does not play a significant role in the translocation dynamics and the force exponent β = −1 regardless of the force magnitude. As the channel width increases the number of possible spatial configurations of the subchain inside the channel becomes significant and the resulting entropic force causes the force exponent to drop below unity. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevResearch.4.033003 SN - 2643-1564 VL - 4 SP - 033003-1 EP - 033003-14 PB - American Physical Society CY - College Park, Maryland, USA ET - 3 ER - TY - JOUR A1 - Sposini, Vittoria A1 - Krapf, Diego A1 - Marinari, Enzo A1 - Sunyer, Raimon A1 - Ritort, Felix A1 - Taheri, Fereydoon A1 - Selhuber-Unkel, Christine A1 - Benelli, Rebecca A1 - Weiss, Matthias A1 - Metzler, Ralf A1 - Oshanin, Gleb T1 - Towards a robust criterion of anomalous diffusion JF - Communications Physics N2 - Anomalous-diffusion, the departure of the spreading dynamics of diffusing particles from the traditional law of Brownian-motion, is a signature feature of a large number of complex soft-matter and biological systems. Anomalous-diffusion emerges due to a variety of physical mechanisms, e.g., trapping interactions or the viscoelasticity of the environment. However, sometimes systems dynamics are erroneously claimed to be anomalous, despite the fact that the true motion is Brownian—or vice versa. This ambiguity in establishing whether the dynamics as normal or anomalous can have far-reaching consequences, e.g., in predictions for reaction- or relaxation-laws. Demonstrating that a system exhibits normal- or anomalous-diffusion is highly desirable for a vast host of applications. Here, we present a criterion for anomalous-diffusion based on the method of power-spectral analysis of single trajectories. The robustness of this criterion is studied for trajectories of fractional-Brownian-motion, a ubiquitous stochastic process for the description of anomalous-diffusion, in the presence of two types of measurement errors. In particular, we find that our criterion is very robust for subdiffusion. Various tests on surrogate data in absence or presence of additional positional noise demonstrate the efficacy of this method in practical contexts. Finally, we provide a proof-of-concept based on diverse experiments exhibiting both normal and anomalous-diffusion. Y1 - 2022 U6 - https://doi.org/10.1038/s42005-022-01079-8 SN - 2399-3650 VL - 5 PB - Springer Nature CY - London ER - TY - JOUR A1 - López de Guereñu Kurganova, Anna A1 - Klier, Dennis Tobias A1 - Haubitz, Toni A1 - Kumke, Michael Uwe T1 - Influence of Gd3+ doping concentration on the properties of Na(Y,Gd)F-4 BT - Yb3+, Tm3+ upconverting nanoparticles and their long-term aging behavior JF - Photochemical & photobiological sciences / European Society for Photobiology N2 - We present a systematic study on the properties of Na(Y,Gd)F-4-based upconverting nanoparticles (UCNP) doped with 18% Yb3+, 2% Tm3+, and the influence of Gd3+ (10-50 mol% Gd3+). UCNP were synthesized via the solvothermal method and had a range of diameters within 13 and 50 nm. Structural and photophysical changes were monitored for the UCNP samples after a 24-month incubation period in dry phase and further redispersion. Structural characterization was performed by means of X-ray diffraction (XRD), transmission electron microscopy (TEM) as well as dynamic light scattering (DLS), and the upconversion luminescence (UCL) studies were executed at various temperatures (from 4 to 295 K) using time-resolved and steady-state spectroscopy. An increase in the hexagonal lattice phase with the increase of Gd3+ content was found, although the cubic phase was prevalent in most samples. The Tm3+-luminescence intensity as well as the Tm3+-luminescence decay times peaked at the Gd3+ concentration of 30 mol%. Although the general upconverting luminescence properties of the nanoparticles were preserved, the 24-month incubation period lead to irreversible agglomeration of the UCNP and changes in luminescence band ratios and lifetimes. KW - Upconversion luminescence KW - Lanthanides KW - Near infra-red KW - Ultra-low KW - temperature KW - Time-resolved spectroscopy Y1 - 2022 U6 - https://doi.org/10.1007/s43630-021-00161-4 SN - 1474-905X SN - 1474-9092 VL - 21 IS - 2 SP - 235 EP - 245 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Vilk, Ohad A1 - Aghion, Erez A1 - Avgar, Tal A1 - Beta, Carsten A1 - Nagel, Oliver A1 - Sabri, Adal A1 - Sarfati, Raphael A1 - Schwartz, Daniel K. A1 - Weiß, Matthias A1 - Krapf, Diego A1 - Nathan, Ran A1 - Metzler, Ralf A1 - Assaf, Michael T1 - Unravelling the origins of anomalous diffusion BT - from molecules to migrating storks JF - Physical Review Research N2 - Anomalous diffusion or, more generally, anomalous transport, with nonlinear dependence of the mean-squared displacement on the measurement time, is ubiquitous in nature. It has been observed in processes ranging from microscopic movement of molecules to macroscopic, large-scale paths of migrating birds. Using data from multiple empirical systems, spanning 12 orders of magnitude in length and 8 orders of magnitude in time, we employ a method to detect the individual underlying origins of anomalous diffusion and transport in the data. This method decomposes anomalous transport into three primary effects: long-range correlations (“Joseph effect”), fat-tailed probability density of increments (“Noah effect”), and nonstationarity (“Moses effect”). We show that such a decomposition of real-life data allows us to infer nontrivial behavioral predictions and to resolve open questions in the fields of single-particle tracking in living cells and movement ecology. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevResearch.4.033055 SN - 2643-1564 VL - 4 IS - 3 SP - 033055-1 EP - 033055-16 PB - American Physical Society CY - College Park, MD ER - TY - JOUR A1 - Seckler, Henrik A1 - Metzler, Ralf T1 - Bayesian deep learning for error estimation in the analysis of anomalous diffusion JF - Nature Communnications N2 - Modern single-particle-tracking techniques produce extensive time-series of diffusive motion in a wide variety of systems, from single-molecule motion in living-cells to movement ecology. The quest is to decipher the physical mechanisms encoded in the data and thus to better understand the probed systems. We here augment recently proposed machine-learning techniques for decoding anomalous-diffusion data to include an uncertainty estimate in addition to the predicted output. To avoid the Black-Box-Problem a Bayesian-Deep-Learning technique named Stochastic-Weight-Averaging-Gaussian is used to train models for both the classification of the diffusionmodel and the regression of the anomalous diffusion exponent of single-particle-trajectories. Evaluating their performance, we find that these models can achieve a wellcalibrated error estimate while maintaining high prediction accuracies. In the analysis of the output uncertainty predictions we relate these to properties of the underlying diffusion models, thus providing insights into the learning process of the machine and the relevance of the output. KW - random-walk KW - models Y1 - 2022 U6 - https://doi.org/10.1038/s41467-022-34305-6 SN - 2041-1723 VL - 13 PB - Nature Publishing Group UK CY - London ER - TY - JOUR A1 - Mayer, Dennis A1 - Lever, Fabiano A1 - Gühr, Markus T1 - Data analysis procedures for time-resolved x-ray photoelectron spectroscopy at a SASE free-electron-laser JF - Journal of physics : B, Atomic, molecular and optical physics N2 - The random nature of self-amplified spontaneous emission (SASE) is a well-known challenge for x-ray core level spectroscopy at SASE free-electron lasers (FELs). Especially in time-resolved experiments that require a combination of good temporal and spectral resolution the jitter and drifts in the spectral characteristics, relative arrival time as well as power fluctuations can smear out spectral-temporal features. We present a combination of methods for the analysis of time-resolved photoelectron spectra based on power and time corrections as well as self-referencing of a strong photoelectron line. Based on sulfur 2p photoelectron spectra of 2-thiouracil taken at the SASE FEL FLASH2, we show that it is possible to correct for some of the photon energy drift and jitter even when reliable shot-to-shot photon energy data is not available. The quality of pump-probe difference spectra improves as random jumps in energy between delay points reduce significantly. The data analysis allows to identify coherent oscillations of 1 eV shift on the mean photoelectron line of 4 eV width with an error of less than 0.1 eV. KW - free-electron laser KW - photoelectron spectroscopy KW - FLASH Y1 - 2022 U6 - https://doi.org/10.1088/1361-6455/ac3c91 SN - 0953-4075 SN - 1361-6455 VL - 55 IS - 5 PB - IOP Publ. CY - Bristol ER - TY - JOUR A1 - Anders, Janet A1 - Sait, Connor R. J. A1 - Horsley, Simon A. R. T1 - Quantum Brownian motion for magnets JF - New journal of physics : the open-access journal for physics N2 - Spin precession in magnetic materials is commonly modelled with the classical phenomenological Landau-Lifshitz-Gilbert (LLG) equation. Based on a quantized three-dimensional spin + environment Hamiltonian, we here derive a spin operator equation of motion that describes precession and includes a general form of damping that consistently accounts for memory, coloured noise and quantum statistics. The LLG equation is recovered as its classical, Ohmic approximation. We further introduce resonant Lorentzian system-reservoir couplings that allow a systematic comparison of dynamics between Ohmic and non-Ohmic regimes. Finally, we simulate the full non-Markovian dynamics of a spin in the semi-classical limit. At low temperatures, our numerical results demonstrate a characteristic reduction and flattening of the steady state spin alignment with an external field, caused by the quantum statistics of the environment. The results provide a powerful framework to explore general three-dimensional dissipation in quantum thermodynamics. KW - open quantum systems KW - coloured and quantum noise KW - memory effects KW - spin KW - dynamics KW - LLG equation KW - magnetisation KW - quantum thermodynamics Y1 - 2022 U6 - https://doi.org/10.1088/1367-2630/ac4ef2 SN - 1367-2630 VL - 24 IS - 3 PB - IOP Publ. Ltd. CY - Bristol ER - TY - THES A1 - Ilin, Ekaterina T1 - High lights: stellar flares as probes of magnetism in stars and star-planet systems T1 - Highlights: Sterneruptionen als Sonden des Magnetismus in Sternen und Stern-Planeten Systemen N2 - Flares are magnetically driven explosions that occur in the atmospheres of all main sequence stars that possess an outer convection zone. Flaring activity is rooted in the magnetic dynamo that operates deep in the stellar interior, propagates through all layers of the atmosphere from the corona to the photosphere, and emits electromagnetic radiation from radio bands to X-ray. Eventually, this radiation, and associated eruptions of energetic particles, are ejected out into interplanetary space, where they impact planetary atmospheres, and dominate the space weather environments of young star-planet systems. Thanks to the Kepler and the Transit Exoplanet Survey Satellite (TESS) missions, flare observations have become accessible for millions of stars and star-planet systems. The goal of this thesis is to use these flares as multifaceted messengers to understand stellar magnetism across the main sequence, investigate planetary habitability, and explore how close-in planets can affect the host star. Using space based observations obtained by the Kepler/K2 mission, I found that flaring activity declines with stellar age, but this decline crucially depends on stellar mass and rotation. I calibrated the age of the stars in my sample using their membership in open clusters from zero age main sequence to solar age. This allowed me to reveal the rapid transition from an active, saturated flaring state to a more quiescent, inactive flaring behavior in early M dwarfs at about 600-800 Myr. This result is an important observational constraint on stellar activity evolution that I was able to de-bias using open clusters as an activity-independent age indicator. The TESS mission quickly superseded Kepler and K2 as the main source of flares in low mass M dwarfs. Using TESS 2-minute cadence light curves, I developed a new technique for flare localization and discovered, against the commonly held belief, that flares do not occur uniformly across their stellar surface: In fast rotating fully convective stars, giant flares are preferably located at high latitudes. This bears implications for both our understanding of magnetic field emergence in these stars, and the impact on the exoplanet atmospheres: A planet that orbits in the equatorial plane of its host may be spared from the destructive effects of these poleward emitting flares. AU Mic is an early M dwarf, and the most actively flaring planet host detected to date. Its innermost companion, AU Mic b is one of the most promising targets for a first observation of flaring star-planet interactions. In these interactions, the planet influences the star, as opposed to space weather, where the planet is always on the receiving side. The effect reflects the properties of the magnetosphere shared by planet and star, as well as the so far inaccessible magnetic properties of planets. In the about 50 days of TESS monitoring data of AU Mic, I searched for statistically robust signs of flaring interactions with AU Mic b as flares that occur in surplus of the star's intrinsic activity. I found the strongest yet still marginal signal in recurring excess flaring in phase with the orbital period of AU Mic b. If it reflects true signal, I estimate that extending the observing time by a factor of 2-3 will yield a statistically significant detection. Well within the reach of future TESS observations, this additional data may bring us closer to robustly detecting this effect than we have ever been. This thesis demonstrates the immense scientific value of space based, long baseline flare monitoring, and the versatility of flares as a carrier of information about the magnetism of star-planet systems. Many discoveries still lay in wait in the vast archives that Kepler and TESS have produced over the years. Flares are intense spotlights into the magnetic structures in star-planet systems that are otherwise far below our resolution limits. The ongoing TESS mission, and soon PLATO, will further open the door to in-depth understanding of small and dynamic scale magnetic fields on low mass stars, and the space weather environment they effect. N2 - Flares sind magnetisch getriebene Explosionen. Sie treten in den Atmosphären aller Hauptreihensterne mit einer äußeren Konvektionszone auf, und sind auf den magnetischen Dynamo zurückzuführen, der tief im Sterninneren arbeitet. Das entstehende Magnetfeld durchdringt alle Schichten der Atmosphäre von der Korona bis zur Photosphäre und sendet elektromagnetische Strahlung vom Radio- bis in den Röntgenbereich aus. Diese Strahlung und die damit verbundenen Eruptionen energiereicher Teilchen werden anschließend in den interplanetaren Raum geschleudert, wo sie auf die Planetenatmosphären treffen und das Weltraumwetter junger Stern-Planeten-Systeme bestimmen. Die Kepler und die Transiting Exoplanet Survey Satellite (TESS) Missionen haben in den letzten Jahren die systematische Beobachtung von Flares auf Millionen von Sternen ermöglicht. Das Ziel dieser Dissertation ist es, Flares in jungen Sternen und Stern-Planeten-Systemen als vielseitige Werkzeuge zur Sondierung des stellaren Magnetismus auf der Hauptreihe zu etablierten, ihre Rolle bei der Bewohnbarkeit von Planeten zu untersuchen und zu erforschen, wie die Wechselwirkung mit nahen Planeten die magnetische Aktivität des Wirtssterns beeinflusst. Anhand von weltraumgestützten Beobachtungen der Kepler/K2-Mission habe ich herausgefunden, dass die Flare-Aktivität mit dem Alter des Sterns abnimmt, wobei dieser Rückgang entscheidend von der Masse und der Rotation des Sterns abhängt. Ich kalibrierte das Alter der Sterne in meiner Stichprobe anhand ihrer Zugehörigkeit zu offenen Sternhaufen von der Nullalter-Hauptreihe bis zum Zustand der heutigen Sonne. Auf diese Weise konnte ich den schnellen Übergang von einer aktiven, gesättigten Flare-Aktivität zu einem ruhigeren, inaktiven Zustand bei frühen M-Zwergen bei etwa 600-800 Millionen Jahren aufdecken. Dieser Zeitpunkt ist eine wichtige Randbedingung für die Entwicklung der Sternaktivität, die ich Dank der offenen Sternhaufen als aktivitätsunabhängigem Altersindikator eindeutig bestimmen konnte. Die TESS-Mission hat Kepler und K2 bereits als Hauptquelle von Flares in M-Zwergen abgelöst. Anhand der zeitlich hochaufgelösten Lichtkurven von TESS entwickelte ich eine neue Technik zur Lokalisierung von Flares und entdeckte, dass -- entgegen der allgemeinen Annahme -- Flares nicht gleichmäßig über die Sternoberfläche verteilt sind: Bei schnell rotierenden, vollkonvektiven Sternen sind die energiereichsten Flares bevorzugt bei hohen Breitengraden zu finden. Das Ergebnis hat Auswirkungen sowohl auf unser Verständnis der Magnetfeldentstehung in diesen Sternen als auch auf die Auswirkungen auf die Atmosphären von Planeten, die in deren Äquatorebene kreisen. Die jungen Welten könnten durch die Lage ihrer Orbits den zerstörerischen Auswirkungen dieser polwärts strahlenden Flares entkommen. AU Mic ist ein früher M-Zwerg und der bisher magnetisch aktivste Stern mit bekannten Planeten. Sein innerster Begleiter, AU Mic b, ist eines der vielversprechendsten Ziele für eine erste Beobachtung der Wechselwirkungen zwischen Stern und Planet. Dabei beeinflusst der Planet den Stern, und nicht, wie bei Weltraumwetter, andersherum. In diesem Effekt spiegeln sich die Eigenschaften der von beiden geteilten Magnetosphäre, sowie beispielsweise die bisher unzugänglichen magnetischen Eigenschaften von Planeten. In den vorhandenen etwa 50 Tagen von TESS-Beobachtungsdaten von AU Mic suchte ich nach statistisch robusten Anzeichen für magnetische Wechselwirkungen mit AU Mic b, die sich als Flares offenbaren, die im Überschuss zur Eigenaktivität des Sterns auftreten. Das stärkste, aber doch vorläufige Signal fand ich in mit der Umlaufperiode von AU Mic b wiederkehrenden, überzähligen Flares. Wenn es sich hierbei um ein wahres Signal handelt, schätze ich anhand der Daten, dass eine Verlängerung der Beobachtungszeit um einen Faktor 2-3 einen statistisch signifikanten Nachweis erbringen wird. Die Anforderung liegt in Bereich zukünftiger TESS-Beobachtungen, und bringt uns somit womöglich näher an eine robuste Detektion dieses Effekts heran, als wir es jemals waren. Die Untersuchungen in dieser Arbeit sind nur durch das Eintreten ins Zeitalter der Flare-Statistik möglich geworden. Diese Arbeit demonstriert den immensen wissenschaftlichen Wert der weltraumgestützten, wochen- und monatelangen Beobachtung von Flares, als auch die Vielseitigkeit von Flares als Informationsträger über den dynamischen Magnetismus in Stern-Planeten-Systemen. In den riesigen Archiven, die Kepler und TESS im Laufe der Jahre angelegt haben, schlummern noch viele Entdeckungen. Flares werfen kontrastreiche Schlaglichter auf magnetische Strukturen in Stern-Planeten-Systemen, die sonst weit unterhalb der modernen Auflösungsgrenze liegen. Die laufenden Beobachtungen von TESS, und bald PLATO, werden die Tür zu einem tiefen Verständnis der kleinen und dynamischen Magnetfelder in diesen Systemen weiter öffnen. KW - stars KW - exoplanets KW - flares KW - Exoplaneten KW - Flares KW - Sterne Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-563565 ER - TY - THES A1 - Zeuschner, Steffen Peer T1 - Magnetoacoustics observed with ultrafast x-ray diffraction N2 - In the present thesis I investigate the lattice dynamics of thin film hetero structures of magnetically ordered materials upon femtosecond laser excitation as a probing and manipulation scheme for the spin system. The quantitative assessment of laser induced thermal dynamics as well as generated picosecond acoustic pulses and their respective impact on the magnetization dynamics of thin films is a challenging endeavor. All the more, the development and implementation of effective experimental tools and comprehensive models are paramount to propel future academic and technological progress. In all experiments in the scope of this cumulative dissertation, I examine the crystal lattice of nanoscale thin films upon the excitation with femtosecond laser pulses. The relative change of the lattice constant due to thermal expansion or picosecond strain pulses is directly monitored by an ultrafast X-ray diffraction (UXRD) setup with a femtosecond laser-driven plasma X-ray source (PXS). Phonons and spins alike exert stress on the lattice, which responds according to the elastic properties of the material, rendering the lattice a versatile sensor for all sorts of ultrafast interactions. On the one hand, I investigate materials with strong magneto-elastic properties; The highly magnetostrictive rare-earth compound TbFe2, elemental Dysprosium or the technological relevant Invar material FePt. On the other hand I conduct a comprehensive study on the lattice dynamics of Bi1Y2Fe5O12 (Bi:YIG), which exhibits high-frequency coherent spin dynamics upon femtosecond laser excitation according to the literature. Higher order standing spinwaves (SSWs) are triggered by coherent and incoherent motion of atoms, in other words phonons, which I quantified with UXRD. We are able to unite the experimental observations of the lattice and magnetization dynamics qualitatively and quantitatively. This is done with a combination of multi-temperature, elastic, magneto-elastic, anisotropy and micro-magnetic modeling. The collective data from UXRD, to probe the lattice, and time-resolved magneto-optical Kerr effect (tr-MOKE) measurements, to monitor the magnetization, were previously collected at different experimental setups. To improve the precision of the quantitative assessment of lattice and magnetization dynamics alike, our group implemented a combination of UXRD and tr-MOKE in a singular experimental setup, which is to my knowledge, the first of its kind. I helped with the conception and commissioning of this novel experimental station, which allows the simultaneous observation of lattice and magnetization dynamics on an ultrafast timescale under identical excitation conditions. Furthermore, I developed a new X-ray diffraction measurement routine which significantly reduces the measurement time of UXRD experiments by up to an order of magnitude. It is called reciprocal space slicing (RSS) and utilizes an area detector to monitor the angular motion of X-ray diffraction peaks, which is associated with lattice constant changes, without a time-consuming scan of the diffraction angles with the goniometer. RSS is particularly useful for ultrafast diffraction experiments, since measurement time at large scale facilities like synchrotrons and free electron lasers is a scarce and expensive resource. However, RSS is not limited to ultrafast experiments and can even be extended to other diffraction techniques with neutrons or electrons. N2 - In der vorliegenden Arbeit untersuche ich die Gitterdynamik von magnetisch geordneten und dünnen Filmen, deren Spinsystem mit Femtosekunden-Laserpulsen angeregt und untersucht wird. Die Quantifizierung der laserinduzierten thermischen Dynamik, der erzeugten Pikosekunden-Schallpulse sowie deren jeweiliger Einfluss auf die Magnetisierungsdynamik ist ein schwieriges Unterfangen. Umso mehr ist die Entwicklung und Anwendung von effizienten experimentellen Konzepten und umfangreichen Modellen grundlegend für das Antreiben des zukünftigen wissenschaftlichen und technologischen Fortschritt. In jedem Experiment dieser kummulativen Dissertation untersuche ich das Kristallgitter von Nanometer dünnen Filmen nach der Anregung mit Femtosekunden-Laserpulsen. Die relative Änderung der Gitterkonstante, hervorgerufen durch thermische Ausdehnung oder Pikosekunden-Schallpulse, wird dabei direkt mittels ultraschneller Röntgenbeugung (UXRD) gemessen. Der Aufbau nutzt zur Bereitstellung von ultrakurzen Röntgenpulsen eine lasergetriebene Plasma-Röntgenquelle (PXS). Phononen und Spins üben gleichermaßen einen Druck auf das Gitter aus, welches entsprechend der elastsischen Eigenschaften des Materials reagiert, was das Gitter zu einem vielseitigen Sensor für ultraschenlle Wechselwirkungen macht. Zum einen untersuche ich Materialien mit starken magnetoelastischen Eigentschaften: die stark magnetostriktive Seltenen-Erden-Verbindung TbFe2, elementares Dysprosium oder das technologisch relavante Invar-Material FePt. Zum anderen habe ich eine umfangreiche Studie der Gitterdynamik von Bi1Y2Fe5O12 (Bi:YIG) angestellt, in dem der Literatur zufolge hochfrequente kohärente Spindynamiken durch Femtosekunden-Laseranregung zu beobachten sind. Diese stehenden Spinwellen (SSWs) höherer Ordnung entstehen durch die kohärente und inkohärente Bewegung von Atomen, in anderen Worten Phononen, welche ich durch UXRD vermessen habe. Somit sind wir in der Lage, die experimentellen Beobachtungen der Gitter- und Spindynamik qualitativ und quantitativ zu vereinigen. Dies geschieht durch eine Kombination von Viel-Temperatur- und Anisotropiemodellierung sowie elastische, magnetoelastische, und mikromagnetsiche Modelle. Die gemeinsamen Daten von UXRD und der zeitaufgelösten magnetooptischen Kerr-Effekt Messungen (tr-MOKE), um jeweils die Gitter- und Spindynamik zu messen, wurden in der Vergangenheit noch an unterschiedlichen experimentellen Aufbauten gemessen. Um die Quantifizierung präziser zu gestalten, haben wir in unserer Arbeitsgruppe UXRD und tr-MOKE in einem einzigen Aufbau kombiniert, welcher somit meines Wissens der erste seiner Art ist. Ich half bei dem Entwurf und der Inbetriebnahme des neuen Aufbaus, welcher die gleichzeitige Messung von Gitter- und Spindynamik auf einer ultraschnellen Zeitskala unter identischen Anregungsbedingungen ermöglicht. Außerdem entwickelte ich eine neue Messroutine für Röntgenbeugung, welche die Messzeit von UXRD-Experimenten um bis zu einer Größenordnungen reduziert. Es nennt sich das Schneiden des reziproken Raumes (reciprocal space slicing, RSS) und nutzt den Vorteil von Flächendetektoren die Bewegung von Beugungsreflexen zu detektieren, was von einer Änderung der Gitterkonstante einhergeht, ohne zeitintensive Scans der Beugungswinkel mit dem Goniometer durchzuführen. RSS ist besonders nützlich für ultraschnelle Beugungsexperimente, weil die Messzeit an Großgeräten wie Synchrotrons oder Freie Elektronen Laser eine seltene und teure Ressource ist. Darüber hinaus ist RSS nicht zwangsläufig auf die Anwendung in ultraschnellen Experimenten beschränkt und kann sogar auf andere Beugungsexperimente, wie die mit Neutronen und Elektronen, ausgeweitet werden. KW - ultrafast KW - X-ray diffraction KW - thin films KW - magnetoelasticity KW - ultraschnell KW - Röntgenbeugung KW - dünne Filme KW - Magnetoelastizität Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-561098 ER - TY - THES A1 - Mayer, Dennis T1 - Time-resolved x-ray spectroscopy of 2-thiouracil T1 - Zeitaufgelöste Röntgenspektroskopie an 2-Thiouracil N2 - In this thesis, I present my contributions to the field of ultrafast molecular spectroscopy. Using the molecule 2-thiouracil as an example, I use ultrashort x-ray pulses from free- electron lasers to study the relaxation dynamics of gas-phase molecular samples. Taking advantage of the x-ray typical element- and site-selectivity, I investigate the charge flow and geometrical changes in the excited states of 2-thiouracil. In order to understand the photoinduced dynamics of molecules, knowledge about the ground-state structure and the relaxation after photoexcitation is crucial. Therefore, a part of this thesis covers the electronic ground-state spectroscopy of mainly 2-thiouracil to provide the basis for the time-resolved experiments. Many of the previously published studies that focused on the gas-phase time-resolved dynamics of thionated uracils after UV excitation relied on information from solution phase spectroscopy to determine the excitation energies. This is not an optimal strategy as solvents alter the absorption spec- trum and, hence, there is no guarantee that liquid-phase spectra resemble the gas-phase spectra. Therefore, I measured the UV-absorption spectra of all three thionated uracils to provide a gas-phase reference and, in combination with calculations, we determined the excited states involved in the transitions. In contrast to the UV absorption, the literature on the x-ray spectroscopy of thionated uracil is sparse. Thus, we measured static photoelectron, Auger-Meitner and x-ray absorption spectra on the sulfur L edge before or parallel to the time-resolved experiments we performed at FLASH (DESY, Hamburg). In addition, (so far unpublished) measurements were performed at the synchrotron SOLEIL (France) which have been included in this thesis and show the spin-orbit splitting of the S 2p photoline and its satellite which was not observed at the free-electron laser. The relaxation of 2-thiouracil has been studied extensively in recent years with ultrafast visible and ultraviolet methods showing the ultrafast nature of the molecular process after photoexcitation. Ultrafast spectroscopy probing the core-level electrons provides a complementary approach to common optical ultrafast techniques. The method inherits its local sensitivity from the strongly localised core electrons. The core energies and core-valence transitions are strongly affected by local valence charge and geometry changes, and past studies have utilised this sensitivity to investigate the molecular process reflected by the ultrafast dynamics. We have built an apparatus that provides the requirements to perform time-resolved x-ray spectroscopy on molecules in the gas phase. With the apparatus, we performed UV-pump x-ray-probe electron spectroscopy on the S 2p edge of 2-thiouracil using the free-electron laser FLASH2. While the UV triggers the relaxation dynamics, the x-ray probes the single sulfur atom inside the molecule. I implemented photoline self-referencing for the photoelectron spectral analysis. This minimises the spectral jitter of the FEL, which is due to the underlying self-amplified spontaneous emission (SASE) process. With this approach, we were not only able to study dynamical changes in the binding energy of the electrons but also to detect an oscillatory behaviour in the shift of the observed photoline, which we associate with non-adiabatic dynamics involving several electronic states. Moreover, we were able to link the UV-induced shift in binding energy to the local charge flow at the sulfur which is directly connected to the electronic state. Furthermore, the analysis of the Auger-Meitner electrons shows that energy shifts observed at early stages of the photoinduced relaxation are related to the geometry change in the molecule. More specifically, the observed increase in kinetic energy of the Auger-Meitner electrons correlates with a previously predicted C=S bond stretch. N2 - In dieser Arbeit präsentiere ich meine Beiträge zum Gebiet der ultraschnellen Molekülspektroskopie. Am Beispiel des Moleküls 2-Thiouracil verwende ich ultrakurze Röntgenpulse von Freie-Elektronen-Lasern, um die Relaxationsdynamik von Molekülproben in der Gasphase zu untersuchen. Unter Ausnutzung der für Röntgenstrahlung typischen Element- und Ortsselektivität untersuche ich den Ladungsfluss und die geometrischen Veränderungen in den angeregten Zuständen von 2-Thiouracil. Um die photoinduzierte Dynamik von Molekülen zu verstehen, ist das Wissen über die Grundzustandsstruktur und die Relaxation nach Photoanregung entscheidend. Daher befasst sich ein Teil dieser Arbeit mit der elektronischen Grundzustandsspektroskopie von 2-Thiouracil, um die Grundlage für die zeitaufgelösten Experimente zu schaffen. Viele der bisher veröffentlichten Studien, die sich mit der zeitaufgelösten Dynamik von Thiouracilen in der Gasphase nach UV-Anregung befassten, stützten sich zur Bestimmung der Anregungsenergien auf Informationen aus der Spektroskopie in Lösung. Dies ist nicht optimal, da Lösungsmittel das Absorptionsspektrum verändern und es daher keine Garantie dafür gibt, dass die Spektren in Lösung den Spektren der Gasphase ähneln. Daher habe ich die UV-Absorptionsspektren aller drei Thiouracile gemessen, um eine Referenz für die Gasphase zu erhalten, und in Kombination mit Berechnungen die an den Übergängen beteiligten angeregten Zustände bestimmt. Im Gegensatz zur UV-Absorption ist die Literatur zur Röntgenspektroskopie von thioniertem Uracil spärlich. Daher haben wir statische Photoelektronen-, Auger-Meitner- und Röntgenabsorptionsspektren an der Schwefel-L-Kante vor oder parallel zu den zeitaufgelösten Experimenten an FLASH (DESY, Hamburg) gemessen. Darüber hinaus wurden (bisher unveröffentlichte) Messungen am Synchrotron SOLEIL (Frankreich) durchgeführt, die in diese Arbeit eingeflossen sind und die Spin-Orbit-Aufspaltung der S 2p-Photolinie und ihres Satelliten zeigen, die am Freie-Elektronen-Laser nicht beobachtet wurde. Die Relaxation von 2-Thiouracil wurde in den letzten Jahren ausgiebig mit ultraschnellen Methoden im sichtbaren und ultravioletten Spektralbereich untersucht, die die ultraschnelle Natur des molekularen Prozesses nach der Photoanregung zeigen. Die ultraschnelle Spektroskopie, bei der die Elektronen des Kernniveaus untersucht werden, bietet einen ergänzenden Ansatz zu den üblichen optischen Techniken. Die Methode erhält ihre lokale Empfindlichkeit durch die stark lokalisierten Kernelektronen. Die Kernenergien und Kern-Valenz-Übergänge werden stark von lokalen Valenzladungs- und Geometrieänderungen beeinflusst, und frühere Studien haben diese Empfindlichkeit genutzt, um den molekularen Prozess zu untersuchen, der sich in der ultraschnellen Dynamik widerspiegelt. Wir haben eine Apparatur gebaut, die die Voraussetzungen für die Durchführung zeitaufgelöster Röntgenspektroskopie an Molekülen in der Gasphase bietet. Mit dieser Apparatur haben wir Anregungs-Abfrage-Elektronenspektroskopie an der S 2p-Kante von 2-Thiouracil an dem Freie-Elektronen-Laser FLASH2 durchgeführt. Zuerst triggert ein UV-Puls die Relaxationsdynamik und anschließend tastet ein Röntgenpuls das einzelne Schwefelatom im Inneren des Moleküls ab. Für die Analyse der Photoelektronenspektren habe ich eine Selbstrefernzierung der Photolinie implementiert, mit deren Hilfe der spektrale Jitter des FEL minimiert werden konnte. Dieser ist auf den zugrunde liegenden Prozess der selbstverstärkten spontanen Emission (SASE) zurückzuführen. Mit diesem Ansatz konnten wir nicht nur dynamische Veränderungen in der Bindungsenergie der Elektronen untersuchen, sondern auch ein oszillierendes Verhalten in der Verschiebung der beobachteten Photolinie feststellen, das wir mit einer nicht-adiabatischen Dynamik in Verbindung bringen, an der mehrere elektronische Zustände beteiligt sind. Außerdem konnten wir die UV-induzierte Verschiebung der Bindungsenergie mit dem lokalen Ladungsfluss am Schwefel in Verbindung bringen, der direkt mit dem elektronischen Zustand verbunden ist. Darüber hinaus zeigt die Analyse der Auger-Meitner-Elektronen, dass die in frühen Stadien der photoinduzierten Relaxation beobachteten Energieverschiebungen mit der Geometrieänderung des Moleküls zusammenhängen. Genauer gesagt korreliert der beobachtete Anstieg der kinetischen Energie der Auger-Meitner-Elektronen mit einer zuvor vorhergesagten Dehnung der C=S-Bindung. KW - thiouracil KW - ultrafast molecular dynamics KW - x-ray spectroscopy KW - Auger-Meitner electron spectroscopy KW - photoelectron spectroscopy KW - free-electron laser KW - FLASH KW - excited-state chemical shift KW - Thiouracil KW - ultraschnelle Moleküldynamik KW - Röntgenspektroskopie KW - Photoelektronenspektroskopie KW - pump-probe spectroscopy KW - Freie-Elektronen-Laser KW - Anregungs-Abfrage-Spektroskopie Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-571636 ER - TY - JOUR A1 - Seckler, Henrik A1 - Metzler, Ralf T1 - Bayesian deep learning for error estimation in the analysis of anomalous diffusion JF - Nature Communications N2 - Modern single-particle-tracking techniques produce extensive time-series of diffusive motion in a wide variety of systems, from single-molecule motion in living-cells to movement ecology. The quest is to decipher the physical mechanisms encoded in the data and thus to better understand the probed systems. We here augment recently proposed machine-learning techniques for decoding anomalous-diffusion data to include an uncertainty estimate in addition to the predicted output. To avoid the Black-Box-Problem a Bayesian-Deep-Learning technique named Stochastic-Weight-Averaging-Gaussian is used to train models for both the classification of the diffusion model and the regression of the anomalous diffusion exponent of single-particle-trajectories. Evaluating their performance, we find that these models can achieve a well-calibrated error estimate while maintaining high prediction accuracies. In the analysis of the output uncertainty predictions we relate these to properties of the underlying diffusion models, thus providing insights into the learning process of the machine and the relevance of the output.
Diffusive motions in complex environments such as living biological cells or soft matter systems can be analyzed with single-particle-tracking approaches, where accuracy of output may vary. The authors involve a machine-learning technique for decoding anomalous-diffusion data and provide an uncertainty estimate together with predicted output. Y1 - 2022 U6 - https://doi.org/10.1038/s41467-022-34305-6 SN - 2041-1723 VL - 13 IS - 1 PB - Nature portfolio CY - Berlin ER - TY - THES A1 - Vu, Nils Leif T1 - A task-based parallel elliptic solver for numerical relativity with discontinuous Galerkin methods N2 - Elliptic partial differential equations are ubiquitous in physics. In numerical relativity---the study of computational solutions to the Einstein field equations of general relativity---elliptic equations govern the initial data that seed every simulation of merging black holes and neutron stars. In the quest to produce detailed numerical simulations of these most cataclysmic astrophysical events in our Universe, numerical relativists resort to the vast computing power offered by current and future supercomputers. To leverage these computational resources, numerical codes for the time evolution of general-relativistic initial value problems are being developed with a renewed focus on parallelization and computational efficiency. Their capability to solve elliptic problems for accurate initial data must keep pace with the increasing detail of the simulations, but elliptic problems are traditionally hard to parallelize effectively. In this thesis, I develop new numerical methods to solve elliptic partial differential equations on computing clusters, with a focus on initial data for orbiting black holes and neutron stars. I develop a discontinuous Galerkin scheme for a wide range of elliptic equations, and a stack of task-based parallel algorithms for their iterative solution. The resulting multigrid-Schwarz preconditioned Newton-Krylov elliptic solver proves capable of parallelizing over 200 million degrees of freedom to at least a few thousand cores, and already solves initial data for a black hole binary about ten times faster than the numerical relativity code SpEC. I also demonstrate the applicability of the new elliptic solver across physical disciplines, simulating the thermal noise in thin mirror coatings of interferometric gravitational-wave detectors to unprecedented accuracy. The elliptic solver is implemented in the new open-source SpECTRE numerical relativity code, and set up to support simulations of astrophysical scenarios for the emerging era of gravitational-wave and multimessenger astronomy. N2 - Elliptische partielle Differentialgleichungen sind in der Physik allgegenwärtig. Das elektrische Feld einer Ladung, die Gravitation der Erde, die Statik einer Brücke, oder die Temperaturverteilung auf einer heißen Herdplatte folgen trotz verschiedenster zugrundeliegender Physik elliptischen Gleichungen ähnlicher Struktur, denn es sind statische, also zeitunabhängige Effekte. Elliptische Gleichungen beschreiben auch astrophysikalische Szenarien von kataklysmischen Ausmaßen, die jegliche Gegebenheiten auf der Erde weit überschreiten. So werden Schwarze Löcher und Neutronensterne -- zwei mögliche Endstadien von massereichen Sternen -- ebenfalls von elliptischen Gleichungen beschrieben. In diesem Fall sind es Einstein's Feldgleichungen von Raum, Zeit, Gravitation und Materie. Da Schwarze Löcher und Neutronensterne mehr Masse als unsere Sonne auf die Größe einer Stadt wie Potsdam komprimieren übernimmt die Gravitation, und damit Einstein's allgemeine Relativitätstheorie, die Kontrolle. Es ist die Aufgabe der numerischen Relativität, Szenarien wie die Kollision solcher gewaltigen Objekte mithilfe von Supercomputern zu simulieren und damit die Gravitationswellensignale vorherzusagen, die von Detektoren auf der Erde gemessen werden können. Jede dieser Simulationen beginnt mit Anfangsdaten, die elliptische Gleichungen erfüllen müssen. In dieser Dissertation entwickle ich neue numerische Methoden um elliptische partielle Differentialgleichungen auf Supercomputern zu lösen, mit besonderem Augenmerk auf Anfangsdaten für Simulationen von Schwarzen Löchern und Neutronensternen. Ich entwickle dafür eine sogenannte discontinuous Galerkin Methode um elliptische Gleichungen auf Computern zu repräsentieren, sowie eine Reihe von Algorithmen um diese Gleichungen anschließend schrittweise numerisch zu lösen bis sie die notwendige Präzision erfüllen. Die Besonderheit dieser Algorithmen liegt in ihrer Eigenschaft, in viele Teilprobleme zerlegt auf einer großen Zahl von Rechenkernen parallel arbeiten zu können. Dieses task-based parallelism ermöglicht die effektive Verwendung von Supercomputern. Ich demonstriere die Fähigkeit meiner Algorithmen, Berechnungen von über 200 Millionen Unbekannten mit hoher Effizienz auf mindestens einige Tausend Rechenkerne verteilen zu können, und Anfangsdaten zweier sich umkreisender Schwarzer Löcher bereits etwa zehnmal schneller zu lösen als der langjährig verwendete Computercode SpEC. Außerdem zeige ich, dass mein neuer Code auch außerhalb der Relativitätstheorie anwendbar ist. Dazu simuliere ich thermisches Rauschen in den Beschichtungen von Spiegeln, das ebenfalls von elliptischen Gleichungen beschrieben wird. Solche Spiegel sind Objekt großen Forschungsinteresses, da sie ein zentrales Element von Gravitationswellendetektoren darstellen. Mein Code zur numerischen Lösung elliptischer Gleichungen ist Teil des kollaborativen und quelloffenen SpECTRE Forschungsprojekts zur Simulation astrophysikalischer Szenarien für die aufstrebende Ära der Gravitationswellen- und Multimessenger-Astronomie. KW - numerical relativity KW - task-based parallelism KW - discontinuous Galerkin methods KW - elliptic partial differential equations KW - black holes KW - initial data KW - high-performance computing KW - iterative methods for sparse linear systems KW - gravitational waves KW - thermal noise in mirror coatings KW - numerische Relativität KW - elliptische partielle Differentialgleichungen KW - schwarze Löcher KW - Anfangsdaten KW - Hochleistungscomputer KW - iterative Methoden zur Lösung linearer Systeme KW - Gravitationswellen KW - thermisches Rauschen in Spiegelbeschichtungen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-562265 ER - TY - JOUR A1 - Regenstein, Wolfgang T1 - Statistische Beschreibung des Resonanzenergietransfers in Lösungen N2 - In resonance energy transfer, photons are transferred from an excited donor to an acceptor over an interaction distance. According to Förster's quantum mechanical theory, this distance can be calculated using the overlap integral of the fluorescence spectrum of the donor and the absorption spectrum of the acceptor. Another possibility of determination is obtained with the help of statistical models, which are compiled in an overview. The distance can be determined by evaluating the extinction curve. In this work, a further statistical variant of the determination of the interaction radius is added and demonstrated in detail using an example. N2 - Beim Resonanzenergietransfer werden Fotonen von einem angeregten Donator über einen Wechselwirkungsabstand auf einen Akzeptor übertragen. Nach der quantenmechanischen Theorie von FÖRSTER kann dieser Abstand mit Hilfe des Überlappungsintegrals von Fluoreszenzspektrum des Donators und Absorp-tionsspektrum des Akzeptors berechnet werden. Eine andere Möglichkeit der Bestimmung erhält man mit Hilfe von statistischen Modellen, die in einem Überblick zusammengestellt sind. Dabei kann der Abstand durch Auswertung der Löschkurve bestimmt werden. In dieser Arbeit wird dazu eine weitere statistische Variante der Bestimmung des Wechselwirkungsradius hinzugefügt und an einem Beispiel ausführlich demonstriert. KW - resonant energy transfer KW - statistical models KW - theory of Förster KW - quenching curve KW - interaction distance KW - Resonanzenergietransfer KW - statistische Modelle KW - Theorie von Förster KW - Löschkurve KW - Wechselwirkungsabstand Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-565009 ER - TY - THES A1 - Thomas, Timon T1 - Cosmic-ray hydrodynamics: theory, numerics, applications T1 - Hydrodynamik der kosmischen Strahlung: Theorie, Numerik, Anwendungen N2 - Cosmic rays (CRs) are a ubiquitous and an important component of astrophysical environments such as the interstellar medium (ISM) and intracluster medium (ICM). Their plasma physical interactions with electromagnetic fields strongly influence their transport properties. Effective models which incorporate the microphysics of CR transport are needed to study the effects of CRs on their surrounding macrophysical media. Developing such models is challenging because of the conceptional, length-scale, and time-scale separation between the microscales of plasma physics and the macroscales of the environment. Hydrodynamical theories of CR transport achieve this by capturing the evolution of CR population in terms of statistical moments. In the well-established one-moment hydrodynamical model for CR transport, the dynamics of the entire CR population are described by a single statistical quantity such as the commonly used CR energy density. In this work, I develop a new hydrodynamical two-moment theory for CR transport that expands the well-established hydrodynamical model by including the CR energy flux as a second independent hydrodynamical quantity. I detail how this model accounts for the interaction between CRs and gyroresonant Alfvén waves. The small-scale magnetic fields associated with these Alfvén waves scatter CRs which fundamentally alters CR transport along large-scale magnetic field lines. This leads to the effects of CR streaming and diffusion which are both captured within the presented hydrodynamical theory. I use an Eddington-like approximation to close the hydrodynamical equations and investigate the accuracy of this closure-relation by comparing it to high-order approximations of CR transport. In addition, I develop a finite-volume scheme for the new hydrodynamical model and adapt it to the moving-mesh code Arepo. This scheme is applied using a simulation of a CR-driven galactic wind. I investigate how CRs launch the wind and perform a statistical analysis of CR transport properties inside the simulated circumgalactic medium (CGM). I show that the new hydrodynamical model can be used to explain the morphological appearance of a particular type of radio filamentary structures found inside the central molecular zone (CMZ). I argue that these harp-like features are synchrotron-radiating CRs which are injected into braided magnetic field lines by a point-like source such as a stellar wind of a massive star or a pulsar. Lastly, I present the finite-volume code Blinc that uses adaptive mesh refinement (AMR) techniques to perform simulations of radiation and magnetohydrodynamics (MHD). The mesh of Blinc is block-structured and represented in computer memory using a graph-based approach. I describe the implementation of the mesh graph and how a diffusion process is employed to achieve load balancing in parallel computing environments. Various test problems are used to verify the accuracy and robustness of the employed numerical algorithms. N2 - Kosmische Strahlung (CR) ist ein allgegenwärtiger und wichtiger Bestandteil astrophysikalischer Umgebungen wie des interstellaren Mediums (ISM) und des Intracluster-Mediums (ICM). Ihre plasmaphysikalischen Wechselwirkungen mit elektromagnetischen Feldern beeinflussen ihre Transporteigenschaften weitgehend. Effektive Modelle, die die Mikrophysik des CR-Transports einbeziehen, sind erforderlich, um die Auswirkungen von CRs auf die sie umgebenden makrophysikalischen Medien zu untersuchen. Die Entwicklung solcher Modelle ist eine Herausforderung, aufgrund der konzeptionellen, Längenskalen-, und Zeitskalen-Unterschiede zwischen den Mikroskalen der Plasmaphysik und den Makroskalen der Umgebung. Hydrodynamische Theorien des CR-Transports erreichen dies, indem sie die Entwicklung der CR-Population in Form von statistischen Momenten erfassen. Im etablierten hydrodynamischen Ein-Moment Modell für den CR-Transport wird die Dynamik der gesamten CR-Population durch eine einzige statistische Größe wie der häufig verwendeten CR-Energiedichte beschrieben. In dieser Arbeit entwickle ich eine neue hydrodynamische Zwei-Momenten Theorie für den CR-Transport, die das etablierte hydrodynamische Modell um den CR-Energiefluss als zweite unabhängige hydrodynamische Größe erweitert. Ich erläutere, wie dieses Modell die Wechselwirkung zwischen CRs und gyroresonanten Alfvén-Wellen berücksichtigt. Die mit diesen Alfvén-Wellen verbundenen kleinskaligen Magnetfelder streuen die CRs, was den CR-Transport entlang großskaligen Magnetfeldlinien grundlegend verändert. Dies führt zu den CR-Strömungs-und Diffusioneffekten, welche beide in der neu vorgestellten hydrodynamischen Theorie erfasst werden. Ich verwende eine adaptierte Eddington Näherung, um die hydrodynamischen Gleichungen zu schließen und untersuche die Genauigkeit dieser Näherung, indem ich sie mit Näherungen höherer Ordnung für den CR-Transport vergleiche. Darüber hinaus entwickle ich ein Finite-Volumen-Schema für das neue hydrodynamische Modell und passe es an den mitbewegten Gitter Code Arepo an. Dieses Schema wird mittels einer Simulation eines CR-getriebenen galaktischen Windes angewendet. Ich untersuche, wie CRs den Wind beschleunigen und führe eine statistische Analyse der CR-Transporteigenschaften innerhalb des simulierten zirkumgalaktischen Mediums (CGM) durch. Ich zeige, dass das neue hydrodynamische Modell das morphologische Erscheinungsbild eines neu-entdeckten bestimmten Typs von filamentartigen Radiostrukturen, welcher in der zentralen molekularen Zone (CMZ) auffindbar ist, erklären kann. Ich schlage vor, dass es sich bei diesen harfenartigen Strukturen um synchrotronstrahlende CRs handelt, die zuvor von einer punktförmigen Quelle wie dem stellaren Wind eines massereichen Sterns oder eines Pulsars in geflochtene Magnetfeldlinien injiziert wurden. Schließlich stelle ich den Finite-Volumen-Code Blinc vor, der adaptive Gitterverfeinerungstechniken (AMR) verwendet, um Simulationen von Strahlungs-und Magnetohydrodynamik (MHD) durchzuführen. Das Gitter von Blinc ist blockstrukturiert und wird im Computerspe-icher mittels eines graphbasierten Ansatzes dargestellt. Ich beschreibe die Implementierung des Gittergraphen und wie ein Diffusionsprozess eingesetzt wird, um einen Lastausgleich in parallelen Rechenumgebungen zu erreichen. Verschiedene Testprobleme werden verwendet, um die Genauigkeit und Robustheit der verwendeten numerischen Algorithmen zu überprüfen. KW - cosmic rays KW - hydrodynamics KW - radiative transfer KW - methods: analytical KW - methods: numerical KW - Galactic center KW - Non-thermal radiation sources KW - galaktisches Zentrum KW - Quellen nichtthermischer Strahlung KW - kosmische Strahlung KW - Hydrodynamik KW - Methoden: analytisch KW - Methoden: numerisch KW - Strahlungstransport Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-563843 ER - TY - GEN A1 - Xu, Pengbo A1 - Zhou, Tian A1 - Metzler, Ralf A1 - Deng, Weihua T1 - Stochastic harmonic trapping of a Lévy walk: transport and first-passage dynamics under soft resetting strategies T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We introduce and study a Lévy walk (LW) model of particle spreading with a finite propagation speed combined with soft resets, stochastically occurring periods in which an harmonic external potential is switched on and forces the particle towards a specific position. Soft resets avoid instantaneous relocation of particles that in certain physical settings may be considered unphysical. Moreover, soft resets do not have a specific resetting point but lead the particle towards a resetting point by a restoring Hookean force. Depending on the exact choice for the LW waiting time density and the probability density of the periods when the harmonic potential is switched on, we demonstrate a rich emerging response behaviour including ballistic motion and superdiffusion. When the confinement periods of the soft-reset events are dominant, we observe a particle localisation with an associated non-equilibrium steady state. In this case the stationary particle probability density function turns out to acquire multimodal states. Our derivations are based on Markov chain ideas and LWs with multiple internal states, an approach that may be useful and flexible for the investigation of other generalised random walks with soft and hard resets. The spreading efficiency of soft-rest LWs is characterised by the first-passage time statistic. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1262 KW - diffusion KW - anomalous diffusion KW - stochastic resetting KW - Levy walks Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-560402 SN - 1866-8372 SP - 1 EP - 28 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - GEN A1 - Teichmann, Erik A1 - Lewandowski, Heather J. A1 - Alemani, Micol T1 - Investigating students’ views of experimental physics in German laboratory classes T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - There is a large variety of goals instructors have for laboratory courses, with different courses focusing on different subsets of goals. An often implicit, but crucial, goal is to develop students’ attitudes, views, and expectations about experimental physics to align with practicing experimental physicists. The assessment of laboratory courses upon this one dimension of learning has been intensively studied in U.S. institutions using the Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS). However, there is no such an instrument available to use in Germany, and the influence of laboratory courses on students views about the nature of experimental physics is still unexplored at German-speaking institutions. Motivated by the lack of an assessment tool to investigate this goal in laboratory courses at German-speaking institutions, we present a translated version of the E-CLASS adapted to the context at German-speaking institutions. We call the German version of the E-CLASS, the GE-CLASS. We describe the translation process and the creation of an automated web-based system for instructors to assess their laboratory courses. We also present first results using GE-CLASS obtained at the University of Potsdam. A first comparison between E-CLASS and GE-CLASS results shows clear differences between University of Potsdam and U.S. students’ views and beliefs about experimental physics. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1263 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-560429 SN - 1866-8372 SP - 010135-1 EP - 010135-17 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Schemenz, Victoria T1 - Correlations between osteocyte lacuno-canalicular network and material characteristics in bone adaptation and regeneration T1 - Korrelationen zwischen dem lakuno-kanalikulären Netzwerk der Osteozyten und Materialeigenschaften bei der Knochenanpassung und -regeneration N2 - The complex hierarchical structure of bone undergoes a lifelong remodeling process, where it adapts to mechanical needs. Hereby, bone resorption by osteoclasts and bone formation by osteoblasts have to be balanced to sustain a healthy and stable organ. Osteocytes orchestrate this interplay by sensing mechanical strains and translating them into biochemical signals. The osteocytes are located in lacunae and are connected to one another and other bone cells via cell processes through small channels, the canaliculi. Lacunae and canaliculi form a network (LCN) of extracellular spaces that is able to transport ions and enables cell-to-cell communication. Osteocytes might also contribute to mineral homeostasis by direct interactions with the surrounding matrix. If the LCN is acting as a transport system, this should be reflected in the mineralization pattern. The central hypothesis of this thesis is that osteocytes are actively changing their material environment. Characterization methods of material science are used to achieve the aim of detecting traces of this interaction between osteocytes and the extracellular matrix. First, healthy murine bones were characterized. The properties analyzed were then compared with three murine model systems: 1) a loading model, where a bone of the mouse was loaded during its life time; 2) a healing model, where a bone of the mouse was cut to induce a healing response; and 3) a disease model, where the Fbn1 gene is dysfunctional causing defects in the formation of the extracellular tissue. The measurement strategy included routines that make it possible to analyze the organization of the LCN and the material components (i.e., the organic collagen matrix and the mineral particles) in the same bone volumes and compare the spatial distribution of different data sets. The three-dimensional network architecture of the LCN is visualized by confocal laser scanning microscopy (CLSM) after rhodamine staining and is then subsequently quantified. The calcium content is determined via quantitative backscattered electron imaging (qBEI), while small- and wide-angle X-ray scattering (SAXS and WAXS) are employed to determine the thickness and length of local mineral particles. First, tibiae cortices of healthy mice were characterized to investigate how changes in LCN architecture can be attributed to interactions of osteocytes with the surrounding bone matrix. The tibial mid-shaft cross-sections showed two main regions, consisting of a band with unordered LCN surrounded by a region with ordered LCN. The unordered region is a remnant of early bone formation and exhibited short and thin mineral particles. The surrounding, more aligned bone showed ordered and dense LCN as well as thicker and longer mineral particles. The calcium content was unchanged between the two regions. In the mouse loading model, the left tibia underwent two weeks of mechanical stimulation, which results in increased bone formation and decreased resorption in skeletally mature mice. Here the specific research question addressed was how do bone material characteristics change at (re)modeling sites? The new bone formed in response to mechanical stimulation showed similar properties in terms of the mineral particles, like the ordered calcium region but lower calcium content compared to the right, non-loaded control bone of the same mice. There was a clear, recognizable border between mature and newly formed bone. Nevertheless, some canaliculi went through this border connecting the LCN of mature and newly formed bone. Additionally, the question should be answered whether the LCN topology and the bone matrix material properties adapt to loading. Although, mechanically stimulated bones did not show differences in calcium content compared to controls, different correlations were found between the local LCN density and the local Ca content depending on whether the bone was loaded or not. These results suggest that the LCN may serve as a mineral reservoir. For the healing model, the femurs of mice underwent an osteotomy, stabilized with an external fixator and were allowed to heal for 21 days. Thus, the spatial variations in the LCN topology with mineral properties within different tissue types and their interfaces, namely calcified cartilage, bony callus and cortex, could be simultaneously visualized and compared in this model. All tissue types showed structural differences across multiple length scales. Calcium content increased and became more homogeneous from calcified cartilage to bony callus to lamellar cortical bone. The degree of LCN organization increased as well, while the lacunae became smaller, as did the lacunar density between these different tissue types that make up the callus. In the calcified cartilage, the mineral particles were short and thin. The newly formed callus exhibited thicker mineral particles, which still had a low degree of orientation. While most of the callus had a woven-like structure, it also served as a scaffold for more lamellar tissue at the edges. The lamelar bone callus showed thinner mineral particles, but a higher degree of alignment in both, mineral particles and the LCN. The cortex showed the highest values for mineral length, thickness and degree of orientation. At the same time, the lacunae number density was 34% lower and the lacunar volume 40% smaller compared to bony callus. The transition zone between cortical and callus regions showed a continuous convergence of bone mineral properties and lacunae shape. Although only a few canaliculi connected callus and the cortical region, this indicates that communication between osteocytes of both tissues should be possible. The presented correlations between LCN architecture and mineral properties across tissue types may suggest that osteocytes have an active role in mineralization processes of healing. A mouse model for the disease marfan syndrome, which includes a genetic defect in the fibrillin-1 gene, was investigated. In humans, Marfan syndrome is characterized by a range of clinical symptoms such as long bone overgrowth, loose joints, reduced bone mineral density, compromised bone microarchitecture, and increased fracture rates. Thus, fibrillin-1 seems to play a role in the skeletal homeostasis. Therefore, the present work studied how marfan syndrome alters LCN architecture and the surrounding bone matrix. The mice with marfan syndrome showed longer tibiae than their healthy littermates from an age of seven weeks onwards. In contrast, the cortical development appeared retarded, which was observed across all measured characteristics, i. e. lower endocortical bone formation, looser and less organized lacuno-canalicular network, less collagen orientation, thinner and shorter mineral particles. In each of the three model systems, this study found that changes in the LCN architecture spatially correlated with bone matrix material parameters. While not knowing the exact mechanism, these results provide indications that osteocytes can actively manipulate a mineral reservoir located around the canaliculi to make a quickly accessible contribution to mineral homeostasis. However, this interaction is most likely not one-sided, but could be understood as an interplay between osteocytes and extra-cellular matrix, since the bone matrix contains biochemical signaling molecules (e.g. non-collagenous proteins) that can change osteocyte behavior. Bone (re)modeling can therefore not only be understood as a method for removing defects or adapting to external mechanical stimuli, but also for increasing the efficiency of possible osteocyte-mineral interactions during bone homeostasis. With these findings, it seems reasonable to consider osteocytes as a target for drug development related to bone diseases that cause changes in bone composition and mechanical properties. It will most likely require the combined effort of materials scientists, cell biologists, and molecular biologists to gain a deeper understanding of how bone cells respond to their material environment. N2 - Knochen haben eine komplexe hierarchische Struktur, die einen lebenslangen Umbauprozess durchläuft, bei dem der Knochen sich seinen mechanischen Anforderungen anpasst. Um ein gesundes und stabiles Organ zu erhalten müssen Knochenresorption (durch Osteoklasten) und Knochenbildung (durch Osteoblasten) ausgewogen sein. Osteozyten lenken dieses Wechselspiel, indem sie mechanische Belastungen wahrnehmen und sie in biochemische Signale übersetzen. Die Osteozyten sitzen in Lakunen und sind durch Kanälchen untereinander und mit anderen Knochenzellen über ein Netzwerk (LCN) verbunden, das in der Lage ist, Ionen zu transportieren und eine Kommunikation von Zelle zu Zelle zu ermöglichen. Außerdem vermutet man, dass Osteozyten auch durch direkte Wechselwirkungen mit der umgebenden Matrix zur Mineralhomöostase beitragen könnten. Im Mittelpunkt dieser Arbeit steht die Frage, ob Osteozyten ihre materielle Umgebung aktiv verändern können. Um Spuren dieser Wechselwirkung zwischen Osteozyten und der extrazellulären Matrix nachzuweisen, werden materialwissenschaftliche Charakterisierungsmethoden eingesetzt. Zunächst wurden gesunde Mäuseknochen charakterisiert. Die erworbenen Ergebnisse wurden dann mit drei murinen Modellsystemen verglichen: 1) einem Belastungsmodell; 2) ein Heilungsmodell und 3) ein Krankheitsmodell, bei dem das Fbn1-Gen dysfunktional ist und Defekte in der Bildung des extrazellulären Gewebes verursacht werden. Die Messstrategie umfasste Routinen, die es ermöglichen, die Organisation des LCN und der Materialkomponenten (d.h. die organische Kollagenmatrix und die mineralischen Partikel) in denselben Knochenvolumina zu analysieren und die räumliche Verteilung der verschiedenen Datensätze zu vergleichen. Die dreidimensionale Netzwerkarchitektur des LCN wird durch konfokale Laser-Scanning-Mikroskopie nach Rhodamin-Färbung gemessen und anschließend quantifiziert. Der Kalziumgehalt wird mittels quantitativer Rückstreuelektronenbildgebung bestimmt, während Klein- und Weitwinkel-Röntgenstreuung verwendet werden, um die Dicke und Länge der Mineralpartikel zu bestimmen. Zunächst wurden Querschnitte der Unterschenkel von gesunden Mäusen charakterisiert, um zu untersuchen, ob Veränderungen in der LCN-Architektur auf Wechselwirkungen von Osteozyten mit der umgebenden Knochenmatrix zurückgeführt werden können. Die Kortizes zeigten zwei Hauptregionen, ein Band mit ungeordneter LCN-Architektur, umgeben von einer Region mit geordneter LCN. Die ungeordnete Region ist ein Überbleibsel der frühen Knochenbildung und wies kurze und dünne Mineralpartikel auf. Der umgebende, stärker ausgerichtete Knochen zeigte ein geordnetes und dichtes LCN, sowie dickere und längere Mineralpartikel. Der Kalziumgehalt blieb bei beiden Regionen unverändert. Im Mausbelastungsmodell wurde das linke Schienbein zwei Wochen lang mechanisch stimuliert, was zu einer erhöhten Knochenbildung führt. Hier sollte die Forschungsfrage beantwortet werden, wie sich Knochenmaterialeigenschaften an (Re-)Modellierungsstellen aufgrund von Belastung ändern. Der, als Reaktion auf die mechanische Stimulation, gebildete neue Knochen zeigte ähnliche Eigenschaften in Bezug auf die Mineralpartikel, wie die geordnete Kortexregion. Es gab eine klar erkennbare Grenze zwischen reifem und neu gebildetem Knochen. Trotzdem gingen einige Kanälchen durch diese Grenze, die die LCN aus reifem und neu gebildetem Knochen verband. Für das Heilungsmodell wurden die Oberschenkel von Mäusen einer Osteotomie unterzogen (einer Operation, bei der durch einen Schnitt in der Diaphyse ein Bruch erzeugt wird). Danach konnte die Fraktur 21 Tage heilen. Dadurch konnten in diesem Modell gleichzeitig verkalkter Knorpel, knöcherner Kallus und Kortex untersucht werden. Dafür wurde die räumliche Verteilung der LCN-Topologie sowie die Mineraleigenschaften der verschiedenen Gewebetypen und ihrer Grenzflächen visualisiert und verglichen. Alle Gewebetypen zeigten strukturelle Unterschiede über mehrere Längenskalen hinweg. Der Kalziumgehalt nahm von kalzifiziertem Knorpel zu knöchernem Kallus zu lamellarem kortikalem Knochen zu und wurde homogener. Der Grad der LCN-Organisation nahm ebenfalls zu, während die Lakunen vom Kallus zum Kortexgewebe kleiner wurden, ebenso wie die Lakunendichte. Im verkalkten Knorpel waren die Mineralpartikel kurz und dünn. Der größte Teil des Kallus wies eine Geflechtsknochenstruktur auf und diente als Gerüst für lamellares Gewebe, das dünnere Mineralpartikel, aber einen höheren Grad an Ausrichtung sowohl in den Mineralpartikeln als auch im LCN aufwies. Der Kortex zeigte die höchsten Werte für Minerallänge, Dicke und Orientierungsgrad. Obwohl nur wenige Kanälchen den Kallus und kortikale Regionen verbinden, weist dies darauf hin, dass eine Kommunikation zwischen Osteozyten beider Gewebe möglich sein sollte. Es wurde auch ein Mausmodell für das Marfan-Syndrom untersucht, das einen Gendefekt im Fibrillin-1-Gen beinhaltet. Beim Menschen ist das Marfan-Syndrom durch eine Reihe klinischer Symptome gekennzeichnet, wie z. B. übermäßiges Wachstum der Gliedmaßen, überstreckbare Gelenke, verringerte Knochenmineraldichte, beeinträchtigte Knochenmikroarchitektur und erhöhte Frakturraten. Somit scheint Fibrillin-1 eine Rolle in der Skeletthomöostase zu spielen. Deswegen untersuchte die vorliegende Arbeit, ob und wie das Marfan-Syndrom die LCN-Architektur und die umgebende Knochenmatrix verändert. Die Mäuse mit Marfan-Syndrom zeigten bereits ab einem Alter von sieben Wochen längere Schienbeine als ihre gesunden Wurfgeschwister. Im Gegensatz dazu erschien die kortikale Entwicklung verzögert, was über alle gemessenen Merkmale hinweg beobachtet wurde, d.h. niedrigere endokortikale Knochenbildung, lockereres und weniger organisiertes LCN, geringerer Grad an Kollagenorientierung sowie ein Trend zu dünneren und kürzeren Mineralpartikel. In jedem der drei Modellsysteme fand diese Studie, dass Änderungen in der LCN-Architektur räumlich mit Parametern des Knochenmatrixmaterials korrelierten. Obwohl der genaue Mechanismus nicht bekannt ist, liefern diese Ergebnisse Hinweise darauf, dass Osteozyten ein Mineralreservoir aktiv manipulieren können. Dieses Reservoir befindet sich um die Kanälchen herum und dieser Prozess würde es ermöglichen, einen schnell zugänglichen Beitrag zur Mineralhomöostase zu leisten. Diese Interaktion ist jedoch höchstwahrscheinlich nicht einseitig, sondern könnte als Wechselspiel zwischen Osteozyten und extrazellulärer Matrix verstanden werden, da die Knochenmatrix biochemische Signalmoleküle enthält, die das Verhalten von Osteozyten verändern können. Knochen(re)modellierung kann daher nicht nur als Methode zur Defektbeseitigung oder Anpassung an äußere mechanische Reize verstanden werden, sondern auch zur Effizienzsteigerung möglicher Osteozyten-Mineral-Interaktionen während der Knochenhomöostase. Angesichts dieser Ergebnisse erscheint es sinnvoll, Osteozyten als Ziel für die Arzneimittelentwicklung im Zusammenhang mit Knochenerkrankungen in Betracht zu ziehen, die Veränderungen der Knochenzusammensetzung und deren mechanischen Eigenschaften verursachen. KW - bone KW - lacunae KW - mineralization KW - SAXS KW - lacuno-canalicular network KW - µCT KW - CLSM KW - konfokales Laser-Scanning-Mikroskop KW - Kleinwinkelröntgenstreuung KW - Knochen KW - Lakunen KW - lakuno-kanaliculäres Netzwerk KW - Mineralisierung KW - µCT Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-559593 ER - TY - THES A1 - Nayak, Abani Shankar T1 - Design, Characterization and On-sky Testing of an Integrated Optics Device for Stellar Interferometry: from Pupil Remappers to Discrete Beam Combiner T1 - Entwicklung, Charakterisierung und Erprobung einer integrierten, optischen Vorrichtung für die stellare Interferometrie: von Pupil Remappers zum diskreten Strahlkombinierer N2 - Stellar interferometry is the only method in observational astronomy for obtaining the highest resolution images of astronomical targets. This method is based on combining light from two or more separate telescopes to obtain the complex visibility that contains information about the brightness distribution of an astronomical source. The applications of stellar interferometry have made significant contributions in the exciting research areas of astronomy and astrophysics, including the precise measurement of stellar diameters, imaging of stellar surfaces, observations of circumstellar disks around young stellar objects, predictions of Einstein's General relativity at the galactic center, and the direct search for exoplanets to name a few. One important related technique is aperture masking interferometry, pioneered in the 1960s, which uses a mask with holes at the re-imaged pupil of the telescope, where the light from the holes is combined using the principle of stellar interferometry. While this can increase the resolution, it comes with a disadvantage. Due to the finite size of the holes, the majority of the starlight (typically > 80 %) is lost at the mask, thus limiting the signal-to-noise ratio (SNR) of the output images. This restriction of aperture masking only to the bright targets can be avoided using pupil remapping interferometry - a technique combining aperture masking interferometry and advances in photonic technologies using single-mode fibers. Due to the inherent spatial filtering properties, the single-mode fibers can be placed at the focal plane of the re-imaged pupil, allowing the utilization of the whole pupil of the telescope to produce a high-dynamic range along with high-resolution images. Thus, pupil remapping interferometry is one of the most promising application areas in the emerging field of astrophotonics. At the heart of an interferometric facility, a beam combiner exists whose primary function is to combine light to obtain high-contrast fringes. A beam combiner can be as simple as a beam splitter or an anamorphic lens to combine light from 2 apertures (or telescopes) or as complex as a cascade of beam splitters and lenses to combine light for > 2 apertures. However, with the field of astrophotonics, interferometric facilities across the globe are increasingly employing some form of photonics technologies by using single-mode fibers or integrated optics (IO) chips as an efficient way to combine light from several apertures. The state-of-the-art instrument - GRAVITY at the very large telescope interferometer (VLTI) facility uses an IO-based beam combiner device reaching visibilities accuracy of better than < 0.25 %, which is roughly 50× as precise as a few decades back. Therefore, in the context of IO-based components for applications in stellar interferometry, this Thesis describes the work towards the development of a 3-dimensional (3-D) IO device - a monolithic astrophotonics component containing both the pupil remappers and a discrete beam combiner (DBC). In this work, the pupil remappers are 3-D single-mode waveguides in a glass substrate collecting light from the re-imaged pupil of the telescope and feeding the light to a DBC, where the combination takes place. The DBC is a lattice of 3-D single-mode waveguides, which interact through evanescent coupling. By observing the output power of single-mode waveguides of the DBC, the visibilities are retrieved by using a calibrated transfer matrix ({U}) of the device. The feasibility of the DBC in retrieving the visibilities theoretically and experimentally had already been studied in the literature but was only limited to laboratory tests with monochromatic light sources. Thus, a part of this work extends these studies by investigating the response of a 4-input DBC to a broad-band light source. Hence, the objectives of this Thesis are the following: 1) Design an IO device for broad-band light operation such that accurate and precise visibilities could be retrieved experimentally at astronomical H-band (1.5-1.65 μm), and 2) Validation of the DBC as a possible beam combination scheme for future interferometric facilities through on-sky testing at the William Herschel Telescope (WHT). This work consisted of designing three different 3-D IO devices. One of the popular methods for fabricating 3-D photonic components in a glass substrate is ultra-fast laser inscription (ULI). Thus, manufacturing of the designed devices was outsourced to Politecnico di Milano as part of an iterative fabrication process using their state-of-the-art ULI facility. The devices were then characterized using a 2-beam Michelson interferometric setup obtaining both the monochromatic and polychromatic visibilities. The retrieved visibilities for all devices were in good agreement as predicted by the simulation results of a DBC, which confirms both the repeatability of the ULI process and the stability of the Michelson setup, thus fulfilling the first objective. The best-performing device was then selected for the pupil-remapping of the WHT using a different optical setup consisting of a deformable mirror and a microlens array. The device successfully collected stellar photons from Vega and Altair. The visibilities were retrieved using a previously calibrated {U} but showed significant deviations from the expected results. Based on the analysis of comparable simulations, it was found that such deviations were primarily caused by the limited SNR of the stellar observations, thus constituting a first step towards the fulfillment of the second objective. N2 - Das Auflösungsvermögen eines Teleskops, also die Fähigkeit, zwei Punktquellen voneinander zu trennen, wird durch ~λ/A bestimmt, wobei λ die Wellenlänge des Lichts und A der Durchmesser des Hauptspiegels des Teleskops ist. Wenn bei einem gegebenen Teleskop zwei punktförmige Objekte durch <λ/A getrennt sind, kann kein eindeutiges Bild dieser Objekte erzeugt werden und das Teleskopsystem ist somit beugungsbegrenzt. Kombiniert man jedoch das Licht von zwei Teleskopen, die durch einen Abstand B voneinander getrennt sind, erhöht sich die Auflösung um einen Faktor ~2B/A und überwindet damit die Beugungsgrenze eines einzelnen Teleskops. Daher wird bei der stellaren Interferometrie - deren Konzept von Michelson in den 1920er Jahren entwickelte wurde - Licht von zwei oder mehr Teleskopen kombiniert, um hochauflösende Bilder von astronomischen Objekten zu erzeugen. Die Anwendung der stellaren Interferometrie hat wichtige Beiträge zur Astronomie und Astrophysik geleistet, von der Untersuchung grundlegender Eigenschaften von Sternen bis hin zur Abbildung extragalaktischer Objekte. Das Herzstück einer interferometrischen Anlage ist ein Strahlkombinierer, der das Licht von mehreren Teleskopen (oder Aperturen) kombiniert, um kontrastreiche Interferenzstreifen zu erhalten. In der Anfangszeit konnte ein Strahlkombinierer ganz einfach sein, wie z.B. ein Strahlteiler oder eine anamorphotische Linse für die Kombination des Lichts von 2 Aperturen (oder Teleskopen), oder sehr komplex, wie z.B. eine Kaskade von Strahlteilern und Linsen, um Licht für >2 Aperturen zu kombinieren. Mit dem aufkommenden Gebiet der Astrophotonik setzen interferometrische Einrichtungen jedoch vermehrt photonische Technologien ein, indem Einzelmoden-Fasern oder ein Chip mit integrierter Optik (IO) verwendet werden, um Licht aus mehreren Aperturen effizient zu kombinieren. Bei der sogenannten pupil remapping interferometry Technik (dt etwa: neugeordnete Pupille) wird beispielsweise Licht mit mehreren Einzelmoden-Wellenleitern auf einem IO-Chip gesammelt. Diese Komponenten werden an der Position im Strahlengang eingefügt, an der die Pupille des Teleskops abgebildet wird. Anschließend wird das Licht aus den Fasern oder Wellenleitern durch eine Freistrahloptik oder IO-basierte Komponente interferometrisch überlagert, um Bilder sowohl mit hohem Kontrast als auch hoher Auflösung zu erzeugen. Im Kontext von IO-basierten Komponenten für stellare Interferometrie ist das Ziel dieser Arbeit die Entwicklung eines 3-dimensionalen (3-D) IO-Bauteils - eine monolithische Astrophotonik-Komponente, die sowohl die Pupil Remapper als auch einen discrete beam combiner (DBC) (dt: Diskreten Strahlkombinierer ) enthält. In dieser Arbeit sind die Pupil Remapper 3-D Einzelmoden-Wellenleiter, die in ein Glassubstrat eingeschrieben sind und das Licht von der abgebildeten Pupille des Teleskops sammeln und zu einem DBC leiten, in dem die Kombination stattfindet. Der DBC ist eine 3-D Gitteranordnung von Einzelmoden-Wellenleitern, die durch evaneszente Kopplung miteinander wechselwirken. Durch Beobachtung der Ausgangsleistung der Einzelmoden-Wellenleiter des DBCs werden mit Hilfe einer kalibrierten Übertragungsmatrix des Systems die Visibilities (dt: Kontrastwerte) ermittelt, die für eine hochauflösende Bildgebung erforderlich sind. Die Eignung von DBCs für die Ermittlung der Kontrastwerte wurde sowohl theoretisch als auch experimentell untersucht und in Fachzeitschriften publiziert. Bisher beschränkten sich diese Untersuchungen jedoch auf Labortests mit monochromatischen Lichtquellen. Die Ziele dieser Arbeit sind daher die folgenden: 1) Die Entwicklung eines IO-Bauteils für die Anwendung mit breitbandigem Licht, so dass Kontrastwerte im astronomischen H-Band (1,5-1,65 μm) ermittelt werden können, 2) experimentelle Demonstration genauer und präziser Kontrastwerte mit dem IO-Bauteil, welches mit der Femtosekundenlaser-Bearbeitungsmethode hergestellt wird, und 3) Validierung des DBCs als mögliches Konzept für die Strahlkombination für zukünftige interferometrische Anlagen durch On-Sky-Tests am William Herschel Teleskop. KW - stellar interferometry KW - ultra-fast laser inscription technology KW - astrophotonics KW - discrete beam cominer KW - pupil remappers KW - visibility KW - integrated optics KW - William Herschel telescope KW - on-sky tests KW - stellare Interferometrie KW - Femtosekundenlaser-Bearbeitungsmethode KW - Astrophotonik KW - diskreter Strahlkombinierer KW - Pupil Remapper KW - Kontrastwerte KW - integrierte Optik KW - William Herschel Teleskop KW - On-Sky-Tests Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-558743 ER - TY - GEN A1 - Sarabadani, Jalal A1 - Metzler, Ralf A1 - Ala-Nissila, Tapio T1 - Driven polymer translocation into a channel: Isoflux tension propagation theory and Langevin dynamics simulations T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Isoflux tension propagation (IFTP) theory and Langevin dynamics (LD) simulations are employed to study the dynamics of channel-driven polymer translocation in which a polymer translocates into a narrow channel and the monomers in the channel experience a driving force fc. In the high driving force limit, regardless of the channel width, IFTP theory predicts τ ∝ f βc for the translocation time, where β = −1 is the force scaling exponent. Moreover, LD data show that for a very narrow channel fitting only a single file of monomers, the entropic force due to the subchain inside the channel does not play a significant role in the translocation dynamics and the force exponent β = −1 regardless of the force magnitude. As the channel width increases the number of possible spatial configurations of the subchain inside the channel becomes significant and the resulting entropic force causes the force exponent to drop below unity. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1292 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574387 SN - 1866-8372 IS - 1292 SP - 033003-1 EP - 033003-14 ER - TY - GEN A1 - Smirnov, Lev A. A1 - Bolotov, Maxim A1 - Bolotov, Dmitri A1 - Osipov, Grigory V. A1 - Pikovsky, Arkady T1 - Finite-density-induced motility and turbulence of chimera solitons T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - We consider a one-dimensional oscillatory medium with a coupling through a diffusive linear field. In the limit of fast diffusion this setup reduces to the classical Kuramoto–Battogtokh model. We demonstrate that for a finite diffusion stable chimera solitons, namely localized synchronous domain in an infinite asynchronous environment, are possible. The solitons are stable also for finite density of oscillators, but in this case they sway with a nearly constant speed. This finite-density-induced motility disappears in the continuum limit, as the velocity of the solitons is inverse proportional to the density. A long-wave instability of the homogeneous asynchronous state causes soliton turbulence, which appears as a sequence of soliton mergings and creations. As the instability of the asynchronous state becomes stronger, this turbulence develops into a spatio-temporal intermittency. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1291 KW - chimera KW - soliton KW - finite-size effects Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574281 SN - 1866-8372 IS - 1291 ER - TY - GEN A1 - Vilk, Ohad A1 - Aghion, Erez A1 - Avgar, Tal A1 - Beta, Carsten A1 - Nagel, Oliver A1 - Sabri, Adal A1 - Sarfati, Raphael A1 - Schwartz, Daniel K. A1 - Weiß, Matthias A1 - Krapf, Diego A1 - Nathan, Ran A1 - Metzler, Ralf A1 - Assaf, Michael T1 - Unravelling the origins of anomalous diffusion BT - from molecules to migrating storks T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Anomalous diffusion or, more generally, anomalous transport, with nonlinear dependence of the mean-squared displacement on the measurement time, is ubiquitous in nature. It has been observed in processes ranging from microscopic movement of molecules to macroscopic, large-scale paths of migrating birds. Using data from multiple empirical systems, spanning 12 orders of magnitude in length and 8 orders of magnitude in time, we employ a method to detect the individual underlying origins of anomalous diffusion and transport in the data. This method decomposes anomalous transport into three primary effects: long-range correlations (“Joseph effect”), fat-tailed probability density of increments (“Noah effect”), and nonstationarity (“Moses effect”). We show that such a decomposition of real-life data allows us to infer nontrivial behavioral predictions and to resolve open questions in the fields of single-particle tracking in living cells and movement ecology. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1303 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-577643 SN - 1866-8372 IS - 1303 ER - TY - JOUR A1 - Mau, Erik Thomas Klaus A1 - Rosenblum, Michael T1 - Optimizing charge-balanced pulse stimulation for desynchronization JF - Chaos : an interdisciplinary journal of nonlinear science N2 - Collective synchronization in a large population of self-sustained units appears both in natural and engineered systems. Sometimes this effect is in demand, while in some cases, it is undesirable, which calls for control techniques. In this paper, we focus on pulsatile control, with the goal to either increase or decrease the level of synchrony. We quantify this level by the entropy of the phase distribution. Motivated by possible applications in neuroscience, we consider pulses of a realistic shape. Exploiting the noisy Kuramoto-Winfree model, we search for the optimal pulse profile and the optimal stimulation phase. For this purpose, we derive an expression for the change of the phase distribution entropy due to the stimulus. We relate this change to the properties of individual units characterized by generally different natural frequencies and phase response curves and the population's state. We verify the general result by analyzing a two-frequency population model and demonstrating a good agreement of the theory and numerical simulations. Y1 - 2022 U6 - https://doi.org/10.1063/5.0070036 SN - 1054-1500 SN - 1089-7682 VL - 32 IS - 1 PB - AIP CY - Melville ER - TY - JOUR A1 - Moreno, Eduardo A1 - Großmann, Robert A1 - Beta, Carsten A1 - Alonso, Sergio T1 - From single to collective motion of social amoebae BT - a computational study of interacting cells JF - Frontiers in physics N2 - The coupling of the internal mechanisms of cell polarization to cell shape deformations and subsequent cell crawling poses many interdisciplinary scientific challenges. Several mathematical approaches have been proposed to model the coupling of both processes, where one of the most successful methods relies on a phase field that encodes the morphology of the cell, together with the integration of partial differential equations that account for the polarization mechanism inside the cell domain as defined by the phase field. This approach has been previously employed to model the motion of single cells of the social amoeba Dictyostelium discoideum, a widely used model organism to study actin-driven motility and chemotaxis of eukaryotic cells. Besides single cell motility, Dictyostelium discoideum is also well-known for its collective behavior. Here, we extend the previously introduced model for single cell motility to describe the collective motion of large populations of interacting amoebae by including repulsive interactions between the cells. We performed numerical simulations of this model, first characterizing the motion of single cells in terms of their polarity and velocity vectors. We then systematically studied the collisions between two cells that provided the basic interaction scenarios also observed in larger ensembles of interacting amoebae. Finally, the relevance of the cell density was analyzed, revealing a systematic decrease of the motility with density, associated with the formation of transient cell clusters that emerge in this system even though our model does not include any attractive interactions between cells. This model is a prototypical active matter system for the investigation of the emergent collective dynamics of deformable, self-driven cells with a highly complex, nonlinear coupling of cell shape deformations, self-propulsion and repulsive cell-cell interactions. Understanding these self-organization processes of cells like their autonomous aggregation is of high relevance as collective amoeboid motility is part of wound healing, embryonic morphogenesis or pathological processes like the spreading of metastatic cancer cells. KW - cell motility KW - cell polarity KW - reaction-diffusion models KW - cell-cell KW - interactions KW - phase field model KW - collective motion KW - active matter Y1 - 2022 U6 - https://doi.org/10.3389/fphy.2021.750187 SN - 2296-424X VL - 9 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Poelking, Carl A1 - Benduhn, Johannes A1 - Spoltore, Donato A1 - Schwarze, Martin A1 - Roland, Steffen A1 - Piersimoni, Fortunato A1 - Neher, Dieter A1 - Leo, Karl A1 - Vandewal, Koen A1 - Andrienko, Denis T1 - Open-circuit voltage of organic solar cells BT - interfacial roughness makes the difference JF - Communications physics N2 - Organic photovoltaics (PV) is an energy-harvesting technology that offers many advantages, such as flexibility, low weight and cost, as well as environmentally benign materials and manufacturing techniques. Despite growth of power conversion efficiencies to around 19 % in the last years, organic PVs still lag behind inorganic PV technologies, mainly due to high losses in open-circuit voltage. Understanding and improving open circuit voltage in organic solar cells is challenging, as it is controlled by the properties of a donor-acceptor interface where the optical excitations are separated into charge carriers. Here, we provide an electrostatic model of a rough donor-acceptor interface and test it experimentally on small molecule PV materials systems. The model provides concise relationships between the open-circuit voltage, photovoltaic gap, charge-transfer state energy, and interfacial morphology. In particular, we show that the electrostatic bias generated across the interface reduces the photovoltaic gap. This negative influence on open-circuit voltage can, however, be circumvented by adjusting the morphology of the donor-acceptor interface. Organic solar cells, despite their high power conversion efficiencies, suffer from open circuit voltage losses making them less appealing in terms of applications. Here, the authors, supported with experimental data on small molecule photovoltaic cells, relate open circuit voltage to photovoltaic gap, charge-transfer state energy, and donor-acceptor interfacial morphology. Y1 - 2022 U6 - https://doi.org/10.1038/s42005-022-01084-x SN - 2399-3650 VL - 5 IS - 1 PB - Nature portfolio CY - Berlin ER - TY - JOUR A1 - Kölsch, Maximilian A1 - Dietrich, Tim A1 - Ujevic, Maximiliano A1 - Brügmann, Bernd T1 - Investigating the mass-ratio dependence of the prompt-collapse threshold with numerical-relativity simulations JF - Physical review : D, Particles, fields, gravitation, and cosmology N2 - The next observing runs of advanced gravitational-wave detectors will lead to a variety of binary neutron star detections and numerous possibilities for multimessenger observations of binary neutron star systems. In this context a clear understanding of the merger process and the possibility of prompt black hole formation after merger is important, as the amount of ejected material strongly depends on the merger dynamics. These dynamics are primarily affected by the total mass of the binary, however, the mass ratio also influences the postmerger evolution. To determine the effect of the mass ratio, we investigate the parameter space around the prompt-collapse threshold with a new set of fully relativistic simulations. The simulations cover three equations of state and seven mass ratios in the range of 1.0 <= q <= 1.75, with five to seven simulations of binary systems of different total mass in each case. The threshold mass is determined through an empirical relation based on the collapse time, which allows us to investigate effects of the mass ratio on the threshold mass and also on the properties of the remnant system. Furthermore, we model effects of mass ratio and equation of state on tidal parameters of threshold configurations. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevD.106.044026 SN - 2470-0010 SN - 2470-0029 VL - 106 IS - 4 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Deb, Marwan A1 - Popova, Elena A1 - Jaffrès, Henri-Yves A1 - Keller, Niels A1 - Bargheer, Matias T1 - Controlling high-frequency spin-wave dynamics using double-pulse laser excitation JF - Physical review applied N2 - Manipulating spin waves is highly required for the development of innovative data transport and processing technologies. Recently, the possibility of triggering high-frequency standing spin waves in magnetic insulators using femtosecond laser pulses was discovered, raising the question about how one can manipulate their dynamics. Here we explore this question by investigating the ultrafast magnetiza-tion and spin-wave dynamics induced by double-pulse laser excitation. We demonstrate a suppression or enhancement of the amplitudes of the standing spin waves by precisely tuning the time delay between the two pulses. The results can be understood as the constructive or destructive interference of the spin waves induced by the first and second laser pulses. Our findings open exciting perspectives towards generating single-mode standing spin waves that combine high frequency with large amplitude and low magnetic damping. Y1 - 2022 U6 - https://doi.org/10.1103/PhysRevApplied.18.044001 SN - 2331-7019 VL - 18 IS - 4 PB - American Physical Society CY - College Park ER - TY - THES A1 - Büchner, Robby T1 - Understanding local electronic structure variations in bio-inspired aromatic molecules T1 - Erkenntnisse über lokale Variationen der elektronischen Struktur in biologisch inspirierten aromatischen Molekülen N2 - In this thesis, the dependencies of charge localization and itinerance in two classes of aromatic molecules are accessed: pyridones and porphyrins. The focus lies on the effects of isomerism, complexation, solvation, and optical excitation, which are concomitant with different crucial biological applications of specific members of these groups of compounds. Several porphyrins play key roles in the metabolism of plants and animals. The nucleobases, which store the genetic information in the DNA and RNA are pyridone derivatives. Additionally, a number of vitamins are based on these two groups of substances. This thesis aims to answer the question of how the electronic structure of these classes of molecules is modified, enabling the versatile natural functionality. The resulting insights into the effect of constitutional and external factors are expected to facilitate the design of new processes for medicine, light-harvesting, catalysis, and environmental remediation. The common denominator of pyridones and porphyrins is their aromatic character. As aromaticity was an early-on topic in chemical physics, the overview of relevant theoretical models in this work also mirrors the development of this scientific field in the 20th century. The spectroscopic investigation of these compounds has long been centered on their global, optical transition between frontier orbitals. The utilization and advancement of X-ray spectroscopic methods characterizing the local electronic structure of molecular samples form the core of this thesis. The element selectivity of the near-edge X-ray absorption fine structure (NEXAFS) is employed to probe the unoccupied density of states at the nitrogen site, which is key for the chemical reactivity of pyridones and porphyrins. The results contribute to the growing database of NEXAFS features and their interpretation, e.g., by advancing the debate on the porphyrin N K-edge through systematic experimental and theoretical arguments. Further, a state-of-the-art laser pump – NEXAFS probe scheme is used to characterize the relaxation pathway of a photoexcited porphyrin on the atomic level. Resonant inelastic X-ray scattering (RIXS) provides complementary results by accessing the highest occupied valence levels including symmetry information. It is shown that RIXS is an effective experimental tool to gain detailed information on charge densities of individual species in tautomeric mixtures. Additionally, the hRIXS and METRIXS high-resolution RIXS spectrometers, which have been in part commissioned in the course of this thesis, will gain access to the ultra-fast and thermal chemistry of pyridones, porphyrins, and many other compounds. With respect to both classes of bio-inspired aromatic molecules, this thesis establishes that even though pyridones and porphyrins differ largely by their optical absorption bands and hydrogen bonding abilities, they all share a global stabilization of local constitutional changes and relevant external perturbation. It is because of this wide-ranging response that pyridones and porphyrins can be applied in a manifold of biological and technical processes. N2 - In dieser Arbeit werden die Abhängigkeiten von Ladungslokalisierung und -wanderung in zwei Klassen von aromatischen Molekülen untersucht: Pyridone und Porphyrine. Der Schwerpunkt liegt auf den Auswirkungen von Isomerie, Komplexierung, Lösung (in Wasser) und optischer Anregung, die mit verschiedenen entscheidenden biologischen Anwendungen spezifischer Mitglieder dieser Gruppen von Verbindungen einhergehen. Mehrere Porphyrine spielen eine Schlüsselrolle im Stoffwechsel von Pflanzen und Tieren. Die Nukleobasen, die die genetische Information in der DNA und RNA speichern, sind Pyridonderivate. Auch mehrere Vitamine basieren auf diesen beiden Stoffgruppen. Ziel dieser Arbeit ist es, die Frage zu beantworten, wie die elektronische Struktur dieser Molekülklassen modifiziert wird, sodass die vielfältigen Funktionen in der Natur ermöglicht werden. Die sich daraus ergebenden Erkenntnisse über die Wirkung konstitutioneller und externer Einflussfaktoren ermöglichen die Entwicklung neuer Verfahren in der Medizin, Katalyse, Solar- und Umwelttechnik. Die Gemeinsamkeit von Pyridonen und Porphyrinen ist ihr aromatischer Charakter. Da Aromatizität von Beginn der chemischen Physik an thematisiert wurde, spiegelt der Überblick relevanter theoretischer Modelle in dieser Arbeit auch die Entwicklung dieses Wissenschaftsgebiets im 20. Jahrhundert wieder. Die spektroskopische Untersuchung dieser Verbindungen konzentrierte sich lange Zeit auf die globalen, optischen Übergänge zwischen den Grenzorbitalen. Die Anwendung und Weiterentwicklung röntgenspektroskopischer Methoden zur Charakterisierung der lokalen elektronischen Struktur von molekularen Proben bilden den Kern dieser Arbeit. Die Elementselektivität der Röntgen-Nahkanten-Absorptions-Spektroskopie (NEXAFS) wird genutzt, um die unbesetzte Zustandsdichte an den Stickstoffatomen zu untersuchen, welche für die chemische Reaktivität von Pyridonen und Porphyrinen verantwortlich sind. Die Ergebnisse tragen zum wachsenden Bestand von NEXAFS-Spektren und ihrer Interpretation bei, z.B. indem sie die Debatte über die N K-Kante von Porphyrinen durch systematische experimentelle und theoretische Argumente voranbringen. Zudem wird ein modernes Laser-Pump – NEXAFS-Probe System verwendet, um den Relaxationsprozess eines photoangeregten Porphyrins auf atomarer Ebene zu charakterisieren. Die resonante inelastische Röntgenstreuung (RIXS) liefert komplementäre Ergebnisse, indem sie die höchsten besetzten Valenzniveaus einschließlich Symmetrieinformationen zugänglich macht. Es wird gezeigt, dass RIXS eine effektive experimentelle Methode ist, um detaillierte Informationen über die Ladungsdichten einzelner Tautomere in einem Gemisch zu erhalten. Zudem werden es die hochauflösenden RIXS-Spektrometer hRIXS und METRIXS, die im Rahmen dieser Arbeit mit in Betrieb genommen wurden, erlauben, Informationen zur ultraschnellen und thermischen Chemie von Pyridonen, Porphyrinen und vielen anderen Verbindungen zu gewinnen. Im Hinblick auf beide Klassen biologisch inspirierter, aromatischer Moleküle wird in dieser Arbeit gezeigt, dass sich Pyridone und Porphyrine zwar durch ihre optischen Absorptionsbanden und ihre Fähigkeit zu Wasserstoffbrückenbindungen unterscheiden, aber alle Verbindungen eine globale Stabilisierung lokaler Konstitutionsänderungen und relevanter äußerer Einflüsse aufweisen. Aufgrund dieser weitreichenden Anpassung können Pyridone und Porphyrine in einer Vielzahl von biologischen und technischen Prozessen eingesetzt werden. KW - NEXAFS KW - RIXS KW - X-ray spectroscopy KW - Aromaticity KW - Porphyrins KW - Pyridones KW - Röntgenspektroskopie KW - Aromatizität KW - Porphyrine KW - Pyridone KW - NEXAFS KW - RIXS Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553192 ER - TY - JOUR A1 - Adolfs, Marjolijn A1 - Hoque, Mohammed Mainul A1 - Shprits, Yuri Y. T1 - Storm-time relative total electron content modelling using machine learning techniques JF - Remote sensing N2 - Accurately predicting total electron content (TEC) during geomagnetic storms is still a challenging task for ionospheric models. In this work, a neural-network (NN)-based model is proposed which predicts relative TEC with respect to the preceding 27-day median TEC, during storm time for the European region (with longitudes 30 degrees W-50 degrees E and latitudes 32.5 degrees N-70 degrees N). The 27-day median TEC (referred to as median TEC), latitude, longitude, universal time, storm time, solar radio flux index F10.7, global storm index SYM-H and geomagnetic activity index Hp30 are used as inputs and the output of the network is the relative TEC. The relative TEC can be converted to the actual TEC knowing the median TEC. The median TEC is calculated at each grid point over the European region considering data from the last 27 days before the storm using global ionosphere maps (GIMs) from international GNSS service (IGS) sources. A storm event is defined when the storm time disturbance index Dst drops below 50 nanotesla. The model was trained with storm-time relative TEC data from the time period of 1998 until 2019 (2015 is excluded) and contains 365 storms. Unseen storm data from 33 storm events during 2015 and 2020 were used to test the model. The UQRG GIMs were used because of their high temporal resolution (15 min) compared to other products from different analysis centers. The NN-based model predictions show the seasonal behavior of the storms including positive and negative storm phases during winter and summer, respectively, and show a mixture of both phases during equinoxes. The model's performance was also compared with the Neustrelitz TEC model (NTCM) and the NN-based quiet-time TEC model, both developed at the German Aerospace Agency (DLR). The storm model has a root mean squared error (RMSE) of 3.38 TEC units (TECU), which is an improvement by 1.87 TECU compared to the NTCM, where an RMSE of 5.25 TECU was found. This improvement corresponds to a performance increase by 35.6%. The storm-time model outperforms the quiet-time model by 1.34 TECU, which corresponds to a performance increase by 28.4% from 4.72 to 3.38 TECU. The quiet-time model was trained with Carrington averaged TEC and, therefore, is ideal to be used as an input instead of the GIM derived 27-day median. We found an improvement by 0.8 TECU which corresponds to a performance increase by 17% from 4.72 to 3.92 TECU for the storm-time model using the quiet-time-model predicted TEC as an input compared to solely using the quiet-time model. KW - ionosphere KW - relative total electron content KW - geomagnetic storms KW - neural KW - networks KW - NTCM KW - European storm-time model Y1 - 2022 U6 - https://doi.org/10.3390/rs14236155 SN - 2072-4292 VL - 14 IS - 23 PB - MDPI CY - Basel ER - TY - JOUR A1 - Schaffenroth, Veronika A1 - Pelisoli, Ingrid A1 - Barlow, Brad N. A1 - Geier, Stephan A1 - Kupfer, Thomas T1 - Hot subdwarfs in close binaries observed from space I. BT - orbital, atmospheric, and absolute parameters and the nature of their companions JF - Astronomy and astrophysics : an international weekly journal N2 - Context: About a third of the hot subdwarfs of spectral type B (sdBs), which are mostly core-helium-burning objects on the extreme horizontal branch, are found in close binaries with cool, low-mass stellar, substellar, or white dwarf companions. They can show light variations due to di fferent phenomena. Aims: Many hot subdwarfs now have space-based light curves with a high signal-to-noise ratio available. We used light curves from the Transiting Exoplanet Survey Satellite and the K2 space mission to look for more sdB binaries. Their light curves can be used to study the hot subdwarf primaries and their companions, and obtained orbital, atmospheric, and absolute parameters for those systems, when combined with other analysis methods. Methods: By classifying the light variations and combining these with the fit of the spectral energy distribution, the distance derived by the parallaxes obtained by Gaia, and the atmospheric parameters, mainly from the literature, we could derive the nature of the primaries and secondaries in 122 (75%) of the known sdB binaries and 82 newly found reflection e ffect systems. We derived absolute masses, radii, and luminosities for a total of 39 hot subdwarfs with cool, low-mass companions, as well 29 known and newly found sdBs with white dwarf companions. Results: The mass distribution of hot subdwarfs with cool, low-mass stellar and substellar companions, di ffers from those with white dwarf companions, implying they come from di fferent populations. By comparing the period and minimum companion mass distributions, we find that the reflection e ffect systems all have M dwarf or brown dwarf companions, and that there seem to be several di fferent populations of hot subdwarfs with white dwarf binaries - one with white dwarf minimum masses around 0.4 M-circle dot, one with longer periods and minimum companion masses up to 0.6 M-circle dot, and at the shortest period, another with white dwarf minimum masses around 0.8 M-circle dot. We also derive the first orbital period distribution for hot subdwarfs with cool, low-mass stellar or substellar systems selected from light variations instead of radial velocity variations. It shows a narrower period distribution, from 1.5 h to 35 h, compared to the distribution of hot subdwarfs with white dwarfs, which ranges from 1 h to 30 days. These period distributions can be used to constrain the previous common-envelope phase. KW - binaries: close KW - subdwarfs KW - white dwarfs KW - stars: late-type KW - stars: KW - horizontal-branch KW - stars: fundamental parameters Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202244214 SN - 0004-6361 SN - 1432-0746 VL - 666 PB - EDP Sciences CY - Les Ulis ER - TY - THES A1 - Foster, Mary Grace T1 - X-Ray studies of exoplanet systems N2 - X-rays are integral to furthering our knowledge of exoplanetary systems. In this work we discuss the use of X-ray observations to understand star-planet interac- tions, mass-loss rates of an exoplanet’s atmosphere and the study of an exoplanet’s atmospheric components using future X-ray spectroscopy. The low-mass star GJ 1151 was reported to display variable low-frequency radio emission, which is an indication of coronal star-planet interactions with an unseen exoplanet. In chapter 5 we report the first X-ray detection of GJ 1151’s corona based on XMM-Newton data. Averaged over the observation, we detect the star with a low coronal temperature of 1.6 MK and an X-ray luminosity of LX = 5.5 × 1026 erg/s. This is compatible with the coronal assumptions for a sub-Alfvénic star- planet interaction origin of the observed radio signals from this star. In chapter 6, we aim to characterise the high-energy environment of known ex- oplanets and estimate their mass-loss rates. This work is based on the soft X-ray instrument on board the Spectrum Roentgen Gamma (SRG) mission, eROSITA, along with archival data from ROSAT, XMM-Newton, and Chandra. We use these four X-ray source catalogues to derive X-ray luminosities of exoplanet host stars in the 0.2-2 keV energy band. A catalogue of the mass-loss rates of 287 exoplan- ets is presented, with 96 of these planets characterised for the first time using new eROSITA detections. Of these first time detections, 14 are of transiting exoplanets that undergo irradiation from their host stars that is of a level known to cause ob- servable evaporation signals in other systems, making them suitable for follow-up observations. In the next generation of space observatories, X-ray transmission spectroscopy of an exoplanet’s atmosphere will be possible, allowing for a detailed look into the atmospheric composition of these planets. In chapter 7, we model sample spectra using a toy model of an exoplanetary atmosphere to predict what exoplanet transit observations with future X-ray missions such as Athena will look like. We then estimate the observable X-ray transmission spectrum for a typical Hot Jupiter-type exoplanet, giving us insights into the advances in X-ray observations of exoplanets in the decades to come. N2 - Röntgenstrahlen sind ein wesentlicher Bestandteil, um unser Wissen über extrasolare Planetensysteme zu vertiefen und zu erweitern. In dieser Arbeit erörtern wir den Einsatz von Röntgenbeobachtungen zum Verständnis von Stern-Planeten-Interaktionen, der Abschätzung von Massenverlustraten von Exoplanetenatmosphären und die Untersuchung der atmosphärischen Komponenten eines Exoplaneten mithilfe zukünftiger Röntgenspektroskopie. Beobachtungen des massearmen Sterns GJ 1151 deuten auf eine variable Emission niederfrequenter Radiostrahlung hin, was als Indiz für koronale Stern-Planeten-Wechselwirkungen mit einem unsichtbaren Exoplaneten angesehen wird. In Kapitel 5 berichten wir über den ersten Röntgennachweis der Korona von GJ 1151, basierend auf XMM-Newton Daten. Über die gesamte Beobachtungsdauer gemittelt, weisen wir den Stern mit einer niedrigen koronalen Temperatur von 1,6 MK und einer Röntgenluminosität von LX = 5, 5 ◊ 1026 erg/s nach. Dieser Nachweis im Röntgenlicht ist kompatibel mit der Annahme, dass sub-Alfvénische Wechselwirkungen zwischen stellarer Corona und Exoplanet die Ursache für die beobachteten Radiosignale des Sterns sind. Kapitel 6 zielt darauf ab, die hochenergetische Umgebung bekannter Exoplaneten zu charakterisieren und die Massenverlustraten der Planetenatmosphären abzuschätzen. Diese Arbeit basiert auf neu gewonnenen Daten des Instruments für weiche Röntgenstrahlung an Bord der Spectrum Roentgen Gamma (SRG) Mission, eROSITA, und wird komplementiert von Archivdaten von ROSAT, XMM-Newton und Chandra. Mithilfe dieser vier Röntgenquellenkataloge vermessen wir die Röntgenhelligkeit der Zentralsterne von bekannten Exoplanetensytemen im Energiebereich von 0,2-2 keV. Die Ergebnisse sind zusammen mit den errechneten Massenverlustraten von 287 Exoplaneten in einem Katalog zusammengefasst, darunter 96 Planeten, die zum ersten Mal durch neue eROSITA-Nachweise charakterisiert wurden. Bei 14 dieser Erstnachweise handelt es sich um transitierende Exoplaneten, die von ihrem Heimatstern so stark bestrahlt werden, dass beobachtbare Signale, ausgelöst durch die Verdampfung ihrer Atmosphäre, zu erwarten sind. Speziell diese Systeme eignen sich besonders für Folgebeobachtungen. Mit der nächsten Generation von Weltraumobservatorien wird die Röntgentransmissionsspektroskopie von extrasolaren Planetenatmosphären möglich sein, was nie dagewesene Details über die atmosphärische Zusammensetzung dieser Planeten ans Licht bringen wird. In Kapitel 7 modellieren wir Transmissionsspektren mithilfe eines vereinfachten Modells einer Exoplanetenatmosphäre um vorherzusagen, wie Transitbeobachtungen von Exoplaneten mit zukünftigen Röntgenmissionen wie Athena aussehen werden. Wir schätzen dann das beobachtbare Röntgentransmissionsspektrum für einen typischen Exoplaneten vom Typ Hot Jupiter ab, was uns einen Einblick in die zu erwartenden Fortschritte bei der Röntgenbeobachtung von Exoplaneten in den kommenden Jahrzehnten gibt. KW - exoplanets KW - x-rays KW - stellar physics KW - Exoplaneten KW - Röntgenstrahlen KW - stellare Physik Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-562152 PB - xiii, 92 ER - TY - JOUR A1 - Kranjc Horvat, Anja A1 - Wiener, Jeff A1 - Schmeling, Sascha A1 - Borowski, Andreas T1 - Learning goals of professional development programs at science research institutions BT - a Delphi study with different stakeholder groups JF - Journal of science teacher education : the official journal of the Association for the Education of Teachers in Science N2 - Effective professional development programs (PDPs) rely on well-defined goals. However, recent studies on PDPs have not explored the goals from a multi-stakeholder perspective. This study identifies the most important learning goals of PDPs at science research institutions as perceived by four groups of stakeholders, namely teachers, education researchers, government representatives, and research scientists. Altogether, over 100 stakeholders from 42 countries involved in PDPs at science research institutions in Europe and North America participated in a three-round Delphi study. In the first round, the stakeholders provided their opinions on what they thought the learning goals of PDPs should be through an open-ended questionnaire. In the second and third rounds, the stakeholders assessed the importance of the learning goals that emerged from the first round by rating and ranking them, respectively. The outcome of the study is a hierarchical list of the ten most important learning goals of PDPs at particle physics laboratories. The stakeholders identified enhancing teachers' knowledge of scientific concepts and models and enhancing their knowledge of the curricula as the most important learning goals. Furthermore, the results show strong agreement between all the stakeholder groups regarding the defined learning goals. Indeed, all groups ranked the learning goals by their perceived importance almost identically. These outcomes could help policymakers establish more specific policies for PDPs. Additionally, they provide PDP practitioners at science research institutions with a solid base for future research and planning endeavors. KW - Teacher professional development KW - Delphi study KW - multi-stakeholder KW - analysis KW - pedagogical content knowledge Y1 - 2021 U6 - https://doi.org/10.1080/1046560X.2021.1905330 SN - 1046-560X SN - 1573-1847 VL - 33 IS - 1 SP - 32 EP - 54 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - JOUR A1 - Lewenstein, Maciej A1 - Cirauqui, David A1 - Angel Garcia-March, Miguel A1 - Corominas, Guillem Guigo A1 - Grzybowski, Przemyslaw A1 - Saavedra, Jose R. M. A1 - Wilkens, Martin A1 - Wehr, Jan T1 - Haake-Lewenstein-Wilkens approach to spin-glasses revisited JF - Journal of physics : A, Mathematical and theoretical N2 - We revisit the Haake-Lewenstein-Wilkens approach to Edwards-Anderson (EA) model of Ising spin glass (SG) (Haake et al 1985 Phys. Rev. Lett. 55 2606). This approach consists in evaluation and analysis of the probability distribution of configurations of two replicas of the system, averaged over quenched disorder. This probability distribution generates squares of thermal copies of spin variables from the two copies of the systems, averaged over disorder, that is the terms that enter the standard definition of the original EA order parameter, qEA 0 0 KW - Edwards-Anderson order parameter KW - Haake-Lewenstein-Wilkens approach KW - spin glass KW - Saddle Point KW - Steppest Descend method Y1 - 2022 U6 - https://doi.org/10.1088/1751-8121/ac9d10 SN - 1751-8113 SN - 1751-8121 VL - 55 IS - 45 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Walker, Simon N. A1 - Boynton, Richard J. A1 - Shprits, Yuri Y. A1 - Balikhin, Michael A. A1 - Drozdov, Alexander Y. T1 - Forecast of the energetic electron environment of the radiation belts JF - Space Weather: The International Journal of Research and Applications N2 - Different modeling methodologies possess different strengths and weakness. For instance, data based models may provide superior accuracy but have a limited spatial coverage while physics based models may provide lower accuracy but provide greater spatial coverage. This study investigates the coupling of a data based model of the electron fluxes at geostationary orbit (GEO) with a numerical model of the radiation belt region to improve the resulting forecasts/pastcasts of electron fluxes over the whole radiation belt region. In particular, two coupling methods are investigated. The first assumes an average value for L* for GEO, namely LGEO* L-GEO* = 6.2. The second uses a value of L* that varies with geomagnetic activity, quantified using the Kp index. As the terrestrial magnetic field responds to variations in geomagnetic activity, the value of L* will vary for a specific location. In this coupling method, the value of L* is calculated using the Kp driven Tsyganenko 89c magnetic field model for field line tracing. It is shown that this addition can result in changes in the initialization of the parameters at the Versatile Electron Radiation Belt model outer boundary. Model outputs are compared to Van Allen Probes MagEIS measurements of the electron fluxes in the inner magnetosphere for the March 2015 geomagnetic storm. It is found that the fixed LGEO* L-GEO* coupling method produces a more realistic forecast. KW - radiation belt forecasts KW - data based NARMAX modeling KW - verb simulations; KW - geostationary orbit KW - electron flux forecasts Y1 - 2022 U6 - https://doi.org/10.1029/2022SW003124 SN - 1542-7390 VL - 20 IS - 12 PB - American Geophysical Union CY - Washington ER - TY - THES A1 - Kranjc Horvat, Anja T1 - Particle physics in high-school education T1 - Teilchenphysik im Oberstufenunterricht BT - what should students and teachers learn? BT - was sollten Jugendliche und Lehrpersonen lernen? N2 - Elementary particle physics is a contemporary topic in science that is slowly being integrated into high-school education. These new implementations are challenging teachers’ professional knowledge worldwide. Therefore, physics education research is faced with two important questions, namely, how can particle physics be integrated in high-school physics curricula and how best to support teachers in enhancing their professional knowledge on particle physics. This doctoral research project set up to provide better guidelines for answering these two questions by conducting three studies on high-school particle physics education. First, an expert concept mapping study was conducted to elicit experts’ expectations on what high-school students should learn about particle physics. Overall, 13 experts in particle physics, computing, and physics education participated in 9 concept mapping rounds. The broad knowledge base of the experts ensured that the final expert concept map covers all major particle physics aspects. Specifically, the final expert concept map includes 180 concepts and examples, connected with 266 links and crosslinks. Among them are also several links to students’ prior knowledge in topics such as mechanics and thermodynamics. The high interconnectedness of the concepts shows possible opportunities for including particle physics as a context for other curricular topics. As such, the resulting expert concept map is showcased as a well-suited tool for teachers to scaffold their instructional practice. Second, a review of 27 high-school physics curricula was conducted. The review uncovered which concepts related to particle physics can be identified in most curricula. Each curriculum was reviewed by two reviewers that followed a codebook with 60 concepts related to particle physics. The analysis showed that most curricula mention cosmology, elementary particles, and charges, all of which are considered theoretical particle physics concepts. None of the experimental particle physics concepts appeared in more than half of the reviewed curricula. Additional analysis was done on two curricular subsets, namely curricula with and curricula without an explicit particle physics chapter. Curricula with an explicit particle physics chapter mention several additional explicit particle physics concepts, namely the Standard Model of particle physics, fundamental interactions, antimatter research, and particle accelerators. The latter is an example of experimental particle physics concepts. Additionally, the analysis revealed that, overall, most curricula include Nature of Science and history of physics, albeit both are typically used as context or as a tool for teaching, respectively. Third, a Delphi study was conducted to investigate stakeholders’ expectations regarding what teachers should learn in particle physics professional development programmes. Over 100 stakeholders from 41 countries represented four stakeholder groups, namely physics education researchers, research scientists, government representatives, and high-school teachers. The study resulted in a ranked list of the 13 most important topics to be included in particle physics professional development programmes. The highest-ranked topics are cosmology, the Standard Model, and real-life applications of particle physics. All stakeholder groups agreed on the overall ranking of the topics. While the highest-ranked topics are again more theoretical, stakeholders also expect teachers to learn about experimental particle physics topics, which are ranked as medium importance topics. The three studies addressed two research aims of this doctoral project. The first research aim was to explore to what extent particle physics is featured in high-school physics curricula. The comparison of the outcomes of the curricular review and the expert concept map showed that curricula cover significantly less than what experts expect high-school students to learn about particle physics. For example, most curricula do not include concepts that could be classified as experimental particle physics. However, the strong connections between the different concept show that experimental particle physics can be used as context for theoretical particle physics concepts, Nature of Science, and other curricular topics. In doing so, particle physics can be introduced in classrooms even though it is not (yet) explicitly mentioned in the respective curriculum. The second research aim was to identify which aspects of content knowledge teachers are expected to learn about particle physics. The comparison of the Delphi study results to the outcomes of the curricular review and the expert concept map showed that stakeholders generally expect teachers to enhance their school knowledge as defined by the curricula. Furthermore, teachers are also expected to enhance their deeper school knowledge by learning how to connect concepts from their school knowledge to other concepts in particle physics and beyond. As such, professional development programmes that focus on enhancing teachers’ school knowledge and deeper school knowledge best support teachers in building relevant context in their instruction. Overall, this doctoral research project reviewed the current state of high-school particle physics education and provided guidelines for future enhancements of the particle physics content in high-school student and teacher education. The outcomes of the project support further implementations of particle physics in high-school education both as explicit content and as context for other curricular topics. Furthermore, the mixed-methods approach and the outcomes of this research project lead to several implications for professional development programmes and science education research, that are discussed in the final chapters of this dissertation. N2 - Elementarteilchenphysik ist ein aktuelles naturwissenschaftliches Thema, das langsam in den Oberstufenunterricht integriert wird. Diese neuen Umsetzungen stellen das Professionswissen der Lehrpersonen weltweit infrage. Die Fachdidaktik sieht sich daher mit zwei wichtigen Fragen beschäftigt: Wie kann die Teilchenphysik in die Oberstufenlehrpläne integriert werden und wie können Lehrpersonen am besten dabei unterstützt werden, ihr Professionswissen über Teilchenphysik zu erweitern? Im Rahmen dieses Promotionsprojekts wurden drei Studien zum Unterricht von Teilchenphysik in der Oberstufe durchgeführt, um bessere Leitlinien für die Beantwortung dieser beiden Fragen zu erarbeiten. Zunächst wurde eine Concept-Mapping-Studie durchgeführt, um die Erwartungen von ExpertInnen darüber zu ermitteln, was SchülerInnen der Oberstufe über Teilchenphysik lernen sollten. Insgesamt nahmen 13 ExpertInnen aus den Bereichen Teilchenphysik, Informatik und Physikdidaktik an 9 Concept-Mapping-Runden teil. Die breite Wissensbasis der Experten stellte sicher, dass die endgültige Expert Concept Map alle wichtigen Aspekte der Teilchenphysik umspannt. Die endgültige Expert Concept Map enthält 180 Konzepte und Beispiele, die mit 266 Verbindungen und Querverweisen verknüpft sind. Darunter befinden sich auch mehrere Bezüge zum Vorwissen der SchülerInnen in Themen wie Mechanik und Thermodynamik. Die starke Vernetzung der Konzepte zeigt, dass es möglich ist, die Teilchenphysik als Kontext für andere Lehrplanthemen zu nutzen. Die so entstandene Expert Concept Map wird als geeignetes Instrument für Lehrpersonen zur Unterstützung ihrer Unterrichtspraxis vorgestellt. Zweitens wurde ein Vergleich von 27 Physiklehrplänen für die Oberstufe durchgeführt. Dabei wurde festgestellt, welche Konzepte mit Bezug zur Teilchenphysik in den meisten Lehrplänen zu finden sind. Jeder Lehrplan wurde von zwei Gutachtern mittels einer Kodieranleitung mit 60 Konzepten zur Teilchenphysik analysiert. Die Lehrplananalyse ergab, dass in den meisten Lehrplänen Kosmologie, Elementarteilchen und Ladungen erwähnt werden, die alle als theoretische Konzepte der Teilchenphysik gelten. Keines der Konzepte der experimentellen Teilchenphysik kam in mehr als der Hälfte der untersuchten Lehrpläne vor. Eine zusätzliche Analyse wurde für zwei Untergruppen von Lehrplänen durchgeführt, nämlich Lehrpläne mit und Lehrpläne ohne ein explizites Teilchenphysik-Kapitel. In Lehrplänen mit einem expliziten Teilchenphysik-Kapitel werden mehrere zusätzliche Teilchenphysik-Konzepte erwähnt, nämlich das Standardmodell der Teilchenphysik, fundamentale Wechselwirkungen, Antimaterieforschung und Teilchenbeschleuniger. Letzteres ist ein Beispiel für Konzepte der experimentellen Teilchenphysik. Darüber hinaus ergab die Analyse, dass die meisten Lehrpläne Aspekte der Nature of Science und der Geschichte der Physik enthalten, obwohl beide typischerweise als Kontext bzw. als Hilfsmittel für den Unterricht verwendet werden. Drittens wurde eine Delphi-Studie durchgeführt, um die Erwartungen von Stakeholder in Bezug darauf zu untersuchen, was Lehrpersonen in Weiterbildungsprogrammen zur Teilchenphysik lernen sollten. Über 100 Stakeholder aus 41 Ländern vertraten vier Stakeholder-Gruppen, nämlich FachdidaktikerInnen, FachwissenschaftlerInnen, RegierungsvertreterInnen und Lehrpersonen. Das Ergebnis der Studie ist eine Rangliste der 13 wichtigsten Themen, die in Fortbildungsprogrammen für Teilchenphysik behandelt werden sollten. Die am höchsten bewerteten Themen waren Kosmologie, das Standardmodell der Teilchenphysik und Anwendungen der Teilchenphysik. Alle Stakeholder-Gruppen waren sich über die Gesamtwertung der Themen einig. Während die am höchsten bewerteten Themen wiederum eher theoretischer Natur waren, erwarten die Stakeholder auch, dass Lehrpersonen etwas über experimentelle Teilchenphysik Themen lernen, die mit mittlerer Bedeutung eingestuft wurden. Mit den drei Studien wurden zwei Forschungsziele dieses Promotionsprojekts verfolgt. Das erste Forschungsziel bestand darin, zu untersuchen, inwiefern die Teilchenphysik in den Physiklehrplänen für die Oberstufe behandelt wird. Der Vergleich der Ergebnisse der Lehrplananalyse und der Expert Concept Map zeigte, dass die Lehrpläne deutlich weniger abdecken als das, was ExpertInnen von OberstufenschülerInnen über Teilchenphysik erwarten. Beispielsweise enthalten die meisten Lehrpläne keine Konzepte, die der experimentellen Teilchenphysik zugeordnet werden können. Die vielfältigen Verbindungen zwischen den verschiedenen Konzepten zeigen jedoch, dass die experimentelle Teilchenphysik als Kontext für Konzepte der theoretischen Teilchenphysik, Nature of Science und andere Lehrplanthemen verwendet werden kann. Auf diese Weise kann die Teilchenphysik im Unterricht eingeführt werden, selbst wenn diese (noch) nicht explizit im jeweiligen Lehrplan erwähnt wird. Das zweite Forschungsziel bestand darin, herauszufinden, welche Aspekte des Fachwissens Lehrpersonen über Teilchenphysik vermittelt werden sollen. Der Vergleich der Ergebnisse der Delphi-Studie mit den Resultaten der Lehrplananalyse und der Expert Concept Map zeigte, dass die Stakeholder im Allgemeinen erwarten, dass Lehrpersonen ihr Schulwissen im Sinne der Lehrpläne erweitern. Darüber hinaus wird von den Lehrpersonen erwartet, dass sie ihr Schulwissen vertiefen, indem sie lernen, wie sie Konzepte aus ihrem Schulwissen mit anderen Konzepten der Teilchenphysik verbinden können. Fortbildungsprogramme, die den Schwerpunkt auf die Verbesserung des Schulwissens und des vertieften Schulwissens der Lehrpersonen legen, unterstützen somit bestmöglich die Lehrpersonen beim Aufbau relevanter Zusammenhänge für ihren Unterricht. Insgesamt wurde im Rahmen dieses Promotionsprojekts der aktuelle Stand des Teilchenphysikunterrichts in der Oberstufe untersucht und es wurden Leitlinien für die künftige Aufwertung teilchenphysikalischer Inhalte in der Ausbildung von Jugendlichen und Lehrpersonen erarbeitet. Die Ergebnisse des Projekts unterstützen die aktuelle Einführung der Teilchenphysik im Oberstufenunterricht sowohl als expliziten Inhalt als auch als Kontext für andere Lehrplanthemen. Darüber hinaus ergeben sich aus der Methodik und den Ergebnissen dieses Forschungsprojekts mehrere Implikationen für Weiterbildungsprogramme und für die Physikdidaktik, die in den letzten Kapiteln dieser Dissertation diskutiert werden. KW - physics education KW - particle physics KW - high-school education KW - teacher professional development KW - Physik Lehramt KW - Teilchenphysik KW - Lehrerfortbildung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-560260 ER - TY - JOUR A1 - Regenstein, Wolfgang T1 - Statistische Beschreibung des Resonanzenergietransfers in Lösungen N2 - Beim Resonanzenergietransfer werden Fotonen von einem angeregten Donator über einen Wechselwirkungsabstand auf einen Akzeptor übertragen. Nach der quantenmechanischen Theorie von FÖRSTER kann dieser Abstand mit Hilfe des Überlappungsintegrals von Fluoreszenzspektrum des Donators und Absorp-tionsspektrum des Akzeptors berechnet werden. Eine andere Möglichkeit der Bestimmung erhält man mit Hilfe von statistischen Modellen, die in einem Überblick zusammengestellt sind. Dabei kann der Abstand durch Auswertung der Löschkurve bestimmt werden. In dieser Arbeit wird dazu eine weitere statistische Variante der Bestimmung des Wechselwirkungsradius hinzugefügt und an einem Beispiel ausführlich demonstriert. N2 - In resonance energy transfer, photons are transferred from an excited donor to an acceptor over an interaction distance. According to Förster's quantum mechanical theory, this distance can be calculated using the overlap integral of the fluorescence spectrum of the donor and the absorption spectrum of the acceptor. Another possibility of determination is obtained with the help of statistical models, which are compiled in an overview. The distance can be determined by evaluating the extinction curve. In this work, a further statistical variant of the determination of the interaction radius is added and demonstrated in detail using an example. KW - resonant energy transfer KW - statistical models KW - theory of Förster KW - quenching curve KW - interaction distance KW - Resonanzenergietransfer KW - statistische Modelle KW - Theorie von Förster KW - Löschkurve KW - Wechselwirkungsabstand Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-565977 ET - 2. Version ER - TY - JOUR A1 - Kliem, Bernhard A1 - Seehafer, Norbert T1 - Helicity shedding by flux rope ejection JF - Astronomy and astrophysics : an international weekly journal N2 - We quantitatively address the conjecture that magnetic helicity must be shed from the Sun by eruptions launching coronal mass ejections in order to limit its accumulation in each hemisphere. By varying the ratio of guide and strapping field and the flux rope twist in a parametric simulation study of flux rope ejection from approximately marginally stable force-free equilibria, different ratios of self- and mutual helicity are set and the onset of the torus or helical kink instability is obtained. The helicity shed is found to vary over a broad range from a minor to a major part of the initial helicity, with self helicity being largely or completely shed and mutual helicity, which makes up the larger part of the initial helicity, being shed only partly. Torus-unstable configurations with subcritical twist and without a guide field shed up to about two-thirds of the initial helicity, while a highly twisted, kink-unstable configuration sheds only about one-quarter. The parametric study also yields stable force-free flux rope equilibria up to a total flux-normalized helicity of 0.25, with a ratio of self- to total helicity of 0.32 and a ratio of flux rope to external poloidal flux of 0.94. These results numerically demonstrate the conjecture of helicity shedding by coronal mass ejections and provide a first account of its parametric dependence. Both self- and mutual helicity are shed significantly; this reduces the total initial helicity by a fraction of ∼0.4--0.65 for typical source region parameters. KW - instabilities KW - magnetic fields KW - magnetohydrodynamics (MHD) KW - Sun KW - corona KW - coronal mass ejections (CMEs) KW - flares Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202142422 SN - 0004-6361 SN - 1432-0746 VL - 659 PB - EDP Sciences CY - Les Ulis ER - TY - THES A1 - Laquai, René T1 - Extending synchrotron X-ray refraction techniques to the quantitative analysis of metallic materials N2 - In this work, two X-ray refraction based imaging methods, namely, synchrotron X-ray refraction radiography (SXRR) and synchrotron X-ray refraction computed tomography (SXRCT), are applied to analyze quantitatively cracks and porosity in metallic materials. SXRR and SXRCT make use of the refraction of X-rays at inner surfaces of the material, e.g., the surfaces of cracks and pores, for image contrast. Both methods are, therefore, sensitive to smaller defects than their absorption based counterparts X-ray radiography and computed tomography. They can detect defects of nanometric size. So far the methods have been applied to the analysis of ceramic materials and fiber reinforced plastics. The analysis of metallic materials requires higher photon energies to achieve sufficient X-ray transmission due to their higher density. This causes smaller refraction angles and, thus, lower image contrast because the refraction index depends on the photon energy. Here, for the first time, a conclusive study is presented exploring the possibility to apply SXRR and SXRCT to metallic materials. It is shown that both methods can be optimized to overcome the reduced contrast due to smaller refraction angles. Hence, the only remaining limitation is the achievable X-ray transmission which is common to all X-ray imaging methods. Further, a model for the quantitative analysis of the inner surfaces is presented and verified. For this purpose four case studies are conducted each posing a specific challenge to the imaging task. Case study A investigates cracks in a coupon taken from an aluminum weld seam. This case study primarily serves to verify the model for quantitative analysis and prove the sensitivity to sub-resolution features. In case study B, the damage evolution in an aluminum-based particle reinforced metal-matrix composite is analyzed. Here, the accuracy and repeatability of subsequent SXRR measurements is investigated showing that measurement errors of less than 3 % can be achieved. Further, case study B marks the fist application of SXRR in combination with in-situ tensile loading. Case study C is out of the highly topical field of additive manufacturing. Here, porosity in additively manufactured Ti-Al6-V4 is analyzed with a special interest in the pore morphology. A classification scheme based on SXRR measurements is devised which allows to distinguish binding defects from keyhole pores even if the defects cannot be spatially resolved. In case study D, SXRCT is applied to the analysis of hydrogen assisted cracking in steel. Due to the high X-ray attenuation of steel a comparatively high photonenergy of 50 keV is required here. This causes increased noise and lower contrast in the data compared to the other case studies. However, despite the lower data quality a quantitative analysis of the occurance of cracks in dependence of hydrogen content and applied mechanical load is possible. N2 - In der vorliegenden Arbeit werden die zwei, auf Refraktion basierende, Röntgenbildgebungsverfahren Synchrotron Röntgen-Refraktions Radiographie (engl.: SXRR) und Synchrotron Röntgen-Refraktions Computertomographie (engl.: SXRCT) für die quantitative Analyse von Rissen und Porosität in metallischenWerkstoffen angewandt. SXRR und SXRCT nutzen die Refraktion von Röntgenstrahlen an inneren Oberflächen des Materials, z.B. die Oberflächen von Rissen und Poren, zur Bildgebung. Beide Methoden sind daher empfindlich gegenüber kleineren Defekten als ihre auf Röntgenabsorption basierenden Gegenstücke, Röntgenradiographie und Röntgen-Computertomographie. Sie sind in der Lage Defekte von nanometrischer Größe zu detektieren. Bislang wurden die Methoden für die Analyse von keramischen Werkstoffen und faserverstärkten Kunststoffen eingesetzt. Die Analyse von metallischenWerkstoffen benötigt höhere Photonenenergien benötigt werden um eine ausreichende Transmission zu erreichen. Dies hat kleinere Refraktionswinkel, und damit geringeren Bildkontrast, zur Folge, da der Brechungsindex von der Photonenenergie abhängt. Hier wird erstmals eine umfassende Studie vorgelegt, welche die Möglichkeiten zur Untersuchung metallischer Werkstoffe mittels SXRR und SXRCT untersucht. Es wird gezeigt, dass der geringere Kontrast, verursacht durch die kleineren Refraktionswinkel, überwunden werden kann. Somit ist die einzig verbleibende Beschränkung die erreichbare Transmission, die alle Röntgenbildgebungsverfahren gemeinsam haben. Darüber hinaus wird ein Modell für die quantitative Auswertung der inneren Oberflächen präsentiert und verifiziert. Zu diesem Zweck werden vier Fallstudien durchgeführt, wobei jede eine spezifische Herausforderung darstellt. In Fallstudie A werden Risse in einer Probe aus einer Aluminiumschweißnaht untersucht. Diese Fallstudie dient hauptsächlich dazu das Modell für die quantitative Analyse zu verifizieren und die Empfindlichkeit gegenüber Strukturen unterhalb des Auflösungsvermögens zu beweisen. In Fallstudie B wird die Entwicklung der Schädigung in einem aluminiumbasierten partikelverstärktem Metall-Matrix Komposit untersucht. Dabei wird die Genauigkeit und Wiederholbarkeit der SXRR Messungen analysiert und es wird gezeigt das Messfehler kleiner 3% erreicht werden können. Darüber hinaus wird in Fallstudie B erstmals SXRR in Kombination mit in-situ Zugbelastung eingesetzt. Fallstudie C ist aus dem hochaktuellen Bereich der additive Fertigung. Hier wird Porosität in additiv gefertigtem Ti-Al6-V4 analysiert mit besonderem Augenmerk auf der Morphologie der Poren. Es wurde ein Verfahren zur Klassifizierung, basierend auf SXRR Messungen, erfunden, welches Bindefehler und Poren voneinander unterscheiden kann auch wenn die Defekte nicht räumlich aufgelöst werden können. In Fallstudie D wird SXRCT zur Analyse von wasserstoffunterstützter Rissbildung in Stahl angewandt. Wegen der hohen Röntgenschwächung des Stahls muss hier mit 50 keV eine vergleichsweise hohe Photonenenergie genutzt werden. Dadurch zeigen die Daten ein erhöhtes Rauschen und geringeren Kontrast verglichen mit den anderen Fallstudien. Allerdings ist es, trotz der geringeren Datenqualität, möglich das Auftreten von Rissen in Abhängigkeit der Wasserstoffkonzentration und mechanischen Belastung zu untersuchen. T2 - Erweiterung von Röntgenrefraktions-Bildgebungsmethoden auf die quantitative Analyse von metallischen Werkstoffen KW - X-ray refraction imaging KW - non-destructive evaluation KW - computed tomography KW - porosity analysis KW - crack detection KW - Röntgen-Refraktions Bildgebung KW - zerstörungfreie Prüfung KW - Computertomography KW - Porositätsanalyse KW - Risserkennung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-541835 ER - TY - THES A1 - Hosseini, Seyed Mehrdad T1 - Non-Langevin Recombination in Fullerene and Non-Fullerene Acceptor Solar Cells T1 - Nicht-Langevin-Rekombination in Fulleren- und Nicht-Fulleren-Akzeptor-Solarzellen N2 - Organic solar cells (OSCs), in recent years, have shown high efficiencies through the development of novel non-fullerene acceptors (NFAs). Fullerene derivatives have been the centerpiece of the accepting materials used throughout organic photovoltaic (OPV) research. However, since 2015 novel NFAs have been a game-changer and have overtaken fullerenes. However, the current understanding of the properties of NFAs for OPV is still relatively limited and critical mechanisms defining the performance of OPVs are still topics of debate. In this thesis, attention is paid to understanding reduced-Langevin recombination with respect to the device physics properties of fullerene and non-fullerene systems. The work is comprised of four closely linked studies. The first is a detailed exploration of the fill factor (FF) expressed in terms of transport and recombination properties in a comparison of fullerene and non-fullerene acceptors. We investigated the key reason behind the reduced FF in the NFA (ITIC-based) devices which is faster non-geminate recombination relative to the fullerene (PCBM[70]-based) devices. This is then followed by a consideration of a newly synthesized NFA Y-series derivative which exhibits the highest power conversion efficiency for OSC at the time. Such that in the second study, we illustrated the role of disorder on the non-geminate recombination and charge extraction of thick NFA (Y6-based) devices. As a result, we enhanced the FF of thick PM6:Y6 by reducing the disorder which leads to suppressing the non-geminate recombination toward non-Langevin system. In the third work, we revealed the reason behind thickness independence of the short circuit current of PM6:Y6 devices, caused by the extraordinarily long diffusion length of Y6. The fourth study entails a broad comparison of a selection of fullerene and non-fullerene blends with respect to charge generation efficiency and recombination to unveil the importance of efficient charge generation for achieving reduced recombination. I employed transient measurements such as Time Delayed Collection Field (TDCF), Resistance dependent Photovoltage (RPV), and steady-state techniques such as Bias Assisted Charge Extraction (BACE), Temperature-Dependent Space Charge Limited Current (T-SCLC), Capacitance-Voltage (CV), and Photo-Induce Absorption (PIA), to analyze the OSCs. The outcomes in this thesis together draw a complex picture of multiple factors that affect reduced-Langevin recombination and thereby the FF and overall performance. This provides a suitable platform for identifying important parameters when designing new blend systems. As a result, we succeeded to improve the overall performance through enhancing the FF of thick NFA device by adjustment of the amount of the solvent additive in the active blend solution. It also highlights potentially critical gaps in the current experimental understanding of fundamental charge interaction and recombination dynamics. N2 - Organische Solarzellen (OSZ) haben in den letzten Jahren durch die Entwicklung neuartiger Nicht-Fulleren-Akzeptoren (NFA) hohe Wirkungsgrade erzielt. Fulleren-Derivate waren das Herzstück der Akzeptor-Materialien, die in der Forschung zur organischen Photovoltaik (OPV) verwendet wurden. Doch seit 2015 haben neuartige NFAs den Fullerenen den Rang abgelaufen. Allerdings ist das derzeitige Verständnis der Eigenschaften von NFA für OPV noch relativ begrenzt und kritische Mechanismen, die die Leistung von OPV bestimmen, sind immer noch Gegenstand von Diskussionen. In dieser Arbeit geht es um das Verständnis der Reduced-Langevin-Rekombination in Hinblick auf die bauteilphysikalischen Eigenschaften von Fulleren- und Nicht-Fulleren-Systemen. Die Arbeit besteht aus vier eng miteinander verbundenen Studien. Die erste ist eine detaillierte Untersuchung des Füllfaktors (FF), ausgedrückt als Transport- und Rekombinationseigenschaften in einem Vergleich von Fulleren und Nicht-Fulleren-Akzeptoren. Wir untersuchten den Hauptgrund für die geringere FF im NFA-Bauelement (auf ITIC-Basis), nämlich die schnellere nicht-geminate Rekombination im Vergleich zum Fulleren-Bauelement (auf PCBM[70]-Basis). Anschließend wird ein neu synthetisiertes NFA-Derivat der Y-Serie betrachtet, das derzeit die höchste Leistungsumwandlungseffizienz für OSZ aufweist. In der zweiten Studie veranschaulichten wir die Rolle der Unordnung bei der nicht-geminaten Rekombination und der Ladungsextraktion von dicken NFA-Bauelementen (auf Y6-Basis). Infolgedessen haben wir die FF von dickem PM6:Y6 verbessert, indem wir die Unordnung reduziert haben, was zur Unterdrückung der nicht-geminaten Rekombination in Richtung Nicht-Langevin-System führt. In der dritten Arbeit haben wir den Grund für die Dickenunabhängigkeit des Kurzschlussstroms von NFA-Bauelementen aufgedeckt, die durch die außerordentlich lange Diffusionslänge von Y6 verursacht wird. Die vierte Studie umfasst einen umfassenden Vergleich einer Auswahl von Fulleren- und Nicht-Fulleren-Mischungen in Hinblick auf die Effizienz der Ladungserzeugung und Rekombination, um die Bedeutung einer effizienten Ladungserzeugung zum Erzielen einer geringeren Rekombination aufzuzeigen. Zur Analyse der OSCs habe ich transiente Messungen wie das Time Delayed Collection Field (TDCF), Resistance dependent Photovoltage (RPV) sowie stationäre Techniken wie die Bias Assisted Charge Extraction (BACE), Temperature-Dependent Space Charge Limited Current (T-SCLC), Capacitance-Voltage (CV) und Photo-Induce Absorption (PIA) eingesetzt. Die Ergebnisse dieser Arbeit zeichnen ein komplexes Bild zahlreicher Faktoren, die die Rekombination nach dem Prinzip des reduzierten Langèvins und damit die FF und die Gesamtleistung beeinflussen. Dies bietet eine geeignete Plattform zum Identifizieren wichtiger Parameter bei der Entwicklung neuer Mischsysteme. So ist es uns gelungen, die Gesamtleistung zu verbessern, indem wir die FF der dicken NFA-Vorrichtung durch Anpassung der Menge des Lösungsmittelzusatzes in der aktiven Mischungslösung erhöht haben. Außerdem werden potenziell kritische Lücken im derzeitigen experimentellen Verständnis der grundlegenden Ladungswechselwirkung und Rekombinationsdynamik aufgezeigt. KW - Organic solar cells KW - Non-fullerene acceptors KW - Charge recombination KW - Non-Langevin systems KW - Structural and energetic disorder KW - Ladungsrekombination KW - Nicht-Langevin-Systeme KW - Nicht-Fulleren-Akzeptoren KW - Organische Solarzellen KW - Strukturelle und energetische Unordnung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-547831 ER - TY - JOUR A1 - Fischer, Eric Wolfgang A1 - Anders, Janet A1 - Saalfrank, Peter T1 - Cavity-altered thermal isomerization rates and dynamical resonant localization in vibro-polaritonic chemistry JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - It has been experimentally demonstrated that reaction rates for molecules embedded in microfluidic optical cavities are altered when compared to rates observed under "ordinary" reaction conditions. However, precise mechanisms of how strong coupling of an optical cavity mode to molecular vibrations affects the reactivity and how resonance behavior emerges are still under dispute. In the present work, we approach these mechanistic issues from the perspective of a thermal model reaction, the inversion of ammonia along the umbrella mode, in the presence of a single-cavity mode of varying frequency and coupling strength. A topological analysis of the related cavity Born-Oppenheimer potential energy surface in combination with quantum mechanical and transition state theory rate calculations reveals two quantum effects, leading to decelerated reaction rates in qualitative agreement with experiments: the stiffening of quantized modes perpendicular to the reaction path at the transition state, which reduces the number of thermally accessible reaction channels, and the broadening of the barrier region, which attenuates tunneling. We find these two effects to be very robust in a fluctuating environment, causing statistical variations of potential parameters, such as the barrier height. Furthermore, by solving the time-dependent Schrodinger equation in the vibrational strong coupling regime, we identify a resonance behavior, in qualitative agreement with experimental and earlier theoretical work. The latter manifests as reduced reaction probability when the cavity frequency omega(c) is tuned resonant to a molecular reactant frequency. We find this effect to be based on the dynamical localization of the vibro-polaritonic wavepacket in the reactant well. Y1 - 2022 U6 - https://doi.org/10.1063/5.0076434 SN - 0021-9606 SN - 1089-7690 VL - 156 IS - 15 PB - American Institute of Physics CY - Melville, NY ER - TY - THES A1 - Perdigón-Toro, Lorena T1 - On the Generation and Fate of Free Carriers in Non-Fullerene Acceptor Organic Solar Cells N2 - Organic solar cells offer an efficient and cost-effective alternative for solar energy harvesting. This type of photovoltaic cell typically consists of a blend of two organic semiconductors, an electron donating polymer and a low molecular weight electron acceptor to create what is known as a bulk heterojunction (BHJ) morphology. Traditionally, fullerene-based acceptors have been used for this purpose. In recent years, the development of new acceptor molecules, so-called non-fullerene acceptors (NFA), has breathed new life into organic solar cell research, enabling record efficiencies close to 19%. Today, NFA-based solar cells are approaching their inorganic competitors in terms of photocurrent generation, but lag in terms of open circuit voltage (V_OC). Interestingly, the V_OC of these cells benefits from small offsets of orbital energies at the donor-NFA interface, although previous knowledge considered large energy offsets to be critical for efficient charge carrier generation. In addition, there are several other electronic and structural features that distinguish NFAs from fullerenes. My thesis focuses on understanding the interplay between the unique attributes of NFAs and the physical processes occurring in solar cells. By combining various experimental techniques with drift-diffusion simulations, the generation of free charge carriers as well as their recombination in state-of-the-art NFA-based solar cells is characterized. For this purpose, solar cells based on the donor polymer PM6 and the NFA Y6 have been investigated. The generation of free charge carriers in PM6:Y6 is efficient and independent of electric field and excitation energy. Temperature-dependent measurements show a very low activation energy for photocurrent generation (about 6 meV), indicating barrierless charge carrier separation. Theoretical modeling suggests that Y6 molecules have large quadrupole moments, leading to band bending at the donor-acceptor interface and thereby reducing the electrostatic Coulomb dissociation barrier. In this regard, this work identifies poor extraction of free charges in competition with nongeminate recombination as a dominant loss process in PM6:Y6 devices. Subsequently, the spectral characteristics of PM6:Y6 solar cells were investigated with respect to the dominant process of charge carrier recombination. It was found that the photon emission under open-circuit conditions can be almost entirely attributed to the occupation and recombination of Y6 singlet excitons. Nevertheless, the recombination pathway via the singlet state contributes only 1% to the total recombination, which is dominated by the charge transfer state (CT-state) at the donor-acceptor interface. Further V_OC gains can therefore only be expected if the density and/or recombination rate of these CT-states can be significantly reduced. Finally, the role of energetic disorder in NFA solar cells is investigated by comparing Y6 with a structurally related derivative, named N4. Layer morphology studies combined with temperature-dependent charge transport experiments show significantly lower structural and energetic disorder in the case of the PM6:Y6 blend. For both PM6:Y6 and PM6:N4, disorder determines the maximum achievable V_OC, with PM6:Y6 benefiting from improved morphological order. Overall, the obtained findings point to avenues for the realization of NFA-based solar cells with even smaller V_OC losses. Further reduction of nongeminate recombination and energetic disorder should result in organic solar cells with efficiencies above 20% in the future. N2 - Organische Solarzellen bieten eine effiziente und kostengünstige Alternative für die Nutzung von Sonnenenergie. Bei dieser Art von Photovoltaikzellen werden in der Regel zwei organische Halbleiter, ein elektronenspendendes Polymer und ein niedermolekularer Elektronenakzeptor gemischt, um eine sogenannte „Bulk-Heterojunction“ (BHJ)-Morphologie zu erzeugen. Traditionell wurden hierfür Fulleren-basierte Akzeptoren verwendet. In den letzten Jahren hat die Entwicklung neuer Akzeptor-Moleküle, so genannter Nicht-Fulleren-Akzeptoren (NFA), der organischen Solarzellenforschung neues Leben eingehaucht und damit Rekordwirkungsgrade >19 % ermöglicht. Heutzutage nähern sich NFA-basierte Solarzellen ihren anorganischen Konkurrenten bezüglich der Photostromerzeugung an, nicht jedoch im Hinblick auf die Leerlaufspannung (V_OC). Interessanterweise profitiert der V_OC dieser Zellen von kleinen Offsets der Orbitalenergien an der Donor-NFA-Grenzfläche, obwohl nach bisherigem Wissen große Energieoffsets als entscheidend für die effiziente Ladungsträgergenerierung an der Heterogrenzfläche galten. Darüber hinaus gibt es eine Reihe weiterer elektronischer und struktureller Merkmale, die NFAs von Fullerenen unterscheiden. Meine Dissertation konzentriert sich auf ein tiefgreifendes Verständnis des Zusammenspiels der einzigartigen Eigenschaften von NFAs und den physikalischen Prozessen in daraus hergestellten Solarzellen. Durch die Kombination verschiedener experimenteller Techniken mit Drift-Diffusions-Simulationen wird die Erzeugung freier Ladungsträger sowie deren Rekombination in modernen NFA-basierten Solarzellen charakterisiert. Zu diesem Zweck wurden Solarzellen auf Basis des Donor-Polymers PM6 und des NFA Y6 untersucht. Die Erzeugung freier Ladungsträger in PM6:Y6 erweist sich dabei als effizient und unabhängig von elektrischem Feld und Anregungsenergie. Temperaturabhängige Messungen zeigen eine sehr geringe Aktivierungsenergie für die Photostromerzeugung (ca. 6 meV), was auf eine barrierefreie Ladungsträgertrennung hinweist. Theoretische Modellierungen legen nahe, dass Y6-Moleküle große Quadrupolmomente aufweisen, was zu einer Bandverbiegung an der Donor-Akzeptor-Grenzfläche führt und dabei die elektrostatische Coulombsch-Dissoziationsbarriere reduziert. In dieser Hinsicht identifiziert diese Arbeit die schlechte Extraktion freier Ladungen in Konkurrenz zur „nongeminalen“ Rekombination als einen dominanten Verlustprozess in PM6:Y6 Zellen. In weiterer Folge wurden die spektralen Eigenschaften von PM6:Y6-Solarzellen im Hinblick auf den dominanten Prozess der Ladungsträgergenerierung und rekombination untersucht. Es zeigte sich, dass die Photonenemission unter Leerlaufbedingungen fast vollständig auf die Besetzung und Rekombination von Y6-Singlet-Exzitonen zurückgeführt werden kann. Trotzdem trägt der Rekombinationspfad über den Singlett-Zustand nur zu 1 % zur gesamten Rekombination bei, die über den Ladungstransfer-Zustand (CT-state) an der Donor-Akzeptor-Grenzfläche dominiert wird. Weitere V_OC Gewinne sind daher nur zu erwarten, wenn die Dichte und/oder die Rekombinationsrate dieser CT-Zustände erheblich reduziert werden kann. Schließlich wird die Rolle der energetischen Unordnung in NFA-Solarzellen durch den Vergleich von Y6 mit einem strukturverwandten Derivat, genannt N4, untersucht. Untersuchungen zur Schichtmorphologie in Kombination mit Experimenten zum temperaturabhängigen Ladungstransport zeigen eine deutlich geringere strukturelle und energetische Unordnung im Fall des PM6:Y6 Blends. Sowohl für PM6:Y6 als auch für PM6:N4 bestimmt die Unordnung den maximal erreichbaren V_OC, wobei PM6:Y6 von der verbesserten morphologischen Ordnung profitiert. Insgesamt weisen die gewonnenen Erkenntnisse Wege für die Realisierung von NFA-basierten Solarzellen mit noch kleineren V_OC-Verlusten auf. Durch die weitere Reduzierung der „nongeminaten“ Rekombination als auch der energetischen Unordnung sollten in Zukunft organische Solarzellen mit einem Wirkungsgrad von über 20 % möglich werden. T2 - Über die Photogenerierung und Rekombination freier Ladungsträger in organischen Solarzellen mit Nicht-Fulleren-Akzeptoren KW - organic solar cells KW - non-fullerene acceptors KW - free charge generation KW - free charge recombination KW - energetic disorder KW - organic semiconductors KW - energetische Unordnung KW - Generierung freier Ladungsträger KW - freie Ladungsträger Rekombination KW - Nicht-Fulleren-Akzeptoren KW - organische Halbleiter KW - organische Solarzellen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-558072 ER - TY - JOUR A1 - Oster, Simon A1 - Fritsch, Tobias A1 - Ulbricht, Alexander A1 - Mohr, Gunther A1 - Bruno, Giovanni A1 - Maierhofer, Christiane A1 - Altenburg, Simon T1 - On the registration of thermographic in situ monitoring data and computed tomography reference data in the scope of defect prediction in laser powder bed fusion JF - Metals : open access journal N2 - The detection of internal irregularities is crucial for quality assessment in metal-based additive manufacturing (AM) technologies such as laser powder bed fusion (L-PBF). The utilization of in-process thermography as an in situ monitoring tool in combination with post-process X-ray micro computed tomography (XCT) as a reference technique has shown great potential for this aim. Due to the small irregularity dimensions, a precise registration of the datasets is necessary as a requirement for correlation. In this study, the registration of thermography and XCT reference datasets of a cylindric specimen containing keyhole pores is carried out for the development of a porosity prediction model. The considered datasets show variations in shape, data type and dimensionality, especially due to shrinkage and material elevation effects present in the manufactured part. Since the resulting deformations are challenging for registration, a novel preprocessing methodology is introduced that involves an adaptive volume adjustment algorithm which is based on the porosity distribution in the specimen. Thus, the implementation of a simple three-dimensional image-to-image registration is enabled. The results demonstrate the influence of the part deformation on the resulting porosity location and the importance of registration in terms of irregularity prediction. KW - selective laser melting (SLM) KW - laser powder bed fusion (L-PBF) KW - additive KW - manufacturing (AM) KW - process monitoring KW - infrared thermography KW - X-ray KW - micro computed tomography (XCT) KW - defect detection KW - image registration Y1 - 2022 U6 - https://doi.org/10.3390/met12060947 SN - 2075-4701 VL - 12 IS - 6 PB - MDPI CY - Basel ER - TY - JOUR A1 - Mallonn, Matthias A1 - Poppenhäger, Katja A1 - Granzer, Thomas A1 - Weber, Michael A1 - Strassmeier, Klaus G. T1 - Detection capability of ground-based meter-sized telescopes for shallow exoplanet transits JF - Astronomy and astrophysics : an international weekly journal N2 - Meter-sized ground-based telescopes are frequently used today for the follow-up of extrasolar planet candidates. While the transit signal of a Jupiter-sized object can typically be detected to a high level of confidence with small telescope apertures as well, the shallow transit dips of planets with the size of Neptune and smaller are more challenging to reveal. We employ new observational data to illustrate the photometric follow-up capabilities of meter-sized telescopes for shallow exoplanet transits. We describe in detail the capability of distinguishing the photometric signal of an exoplanet transit from an underlying trend in the light curve. The transit depths of the six targets we observed, Kepler-94b, Kepler-63b, K2-100b, K2-138b, K2-138c, and K2-138e, range from 3.9 ppt down to 0.3 ppt. For five targets of this sample, we provide the first ground-based photometric follow-up. The timing of three targets is precisely known from previous observations, and the timing of the other three targets is uncertain and we aim to constrain it. We detect or rule out the transit features significantly in single observations for the targets that show transits of 1.3 ppt or deeper. The shallower transit depths of two targets of 0.6 and 0.8 ppt were detected tentatively in single light curves, and were detected significantly by repeated observations. Only for the target of the shallowest transit depth of 0.3 ppt were we unable to draw a significant conclusion despite combining five individual light curves. An injection-recovery test on our real data shows that we detect transits of 1.3 ppt depth significantly in single light curves if the transit is fully covered, including out-of-transit data toward both sides, in some cases down to 0.7 ppt depth. For Kepler-94b, Kepler-63b, and K2-100b, we were able to verify the ephemeris. In the case of K2-138c with a 0.6 ppt deep transit, we were able to refine it, and in the case of K2-138e, we ruled out the transit in the time interval of more than ±1.5 σ of its current literature ephemeris. KW - methods: observational KW - techniques: photometric KW - planets and satellites: fundamental parameters Y1 - 2022 U6 - https://doi.org/10.1051/0004-6361/202140599 SN - 0004-6361 SN - 1432-0746 VL - 657 PB - EDP Sciences CY - Les Ulis ER - TY - JOUR A1 - Poppenhäger, Katja T1 - Helium absorption in exoplanet atmospheres is connected to stellar coronal abundances JF - Monthly notices of the Royal Astronomical Society N2 - Transit observations in the helium triplet around 10 830 Angstrom are a successful tool to study exoplanetary atmospheres and their mass loss. Forming those lines requires ionization and recombination of helium in the exoplanetary atmosphere. This ionization is caused by stellar photons at extreme ultraviolet (EUV) wavelengths; however, no currently active telescopes can observe this part of the stellar spectrum. The relevant part of the stellar EUV spectrum consists of individual emission lines, many of them being formed by iron at coronal temperatures. The stellar iron abundance in the corona is often observed to be depleted for high-activity low-mass stars due to the first ionization potential (FIP) effect. I show that stars with high versus low coronal iron abundances follow different scaling laws that tie together their X-ray emission and the narrow-band EUV flux that causes helium ionization. I also show that the stellar iron to oxygen abundance ratio in the corona can be measured reasonably well from X-ray CCD spectra, yielding similar results to high-resolution X-ray observations. Taking coronal iron abundance into account, the currently observed large scatter in the relationship of EUV irradiation with exoplanetary helium transit depths can be reduced, improving the target selection criteria for exoplanet transmission spectroscopy. In particular, previously puzzling non-detections of helium for Neptunic exoplanets are now in line with expectations from the revised scaling laws. KW - planets and satellites: atmospheres KW - stars: abundances KW - stars: coronae KW - stars: late-type KW - ultraviolet: stars KW - X-rays: stars Y1 - 2022 U6 - https://doi.org/10.1093/mnras/stac507 SN - 0035-8711 SN - 1365-2966 VL - 512 IS - 2 SP - 1751 EP - 1764 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Nemati, Somayyeh A1 - Henkel, Carsten A1 - Anders, Janet T1 - Coupling function from bath density of states JF - epl : a letters journal exploring the frontiers of physics N2 - Modelling of an open quantum system requires knowledge of parameters that specify how it couples to its environment. However, beyond relaxation rates, realistic parameters for specific environments and materials are rarely known. Here we present a method of inferring the coupling between a generic system and its bosonic (e.g., phononic) environment from the experimentally measurable density of states (DOS). With it we confirm that the DOS of the well-known Debye model for three-dimensional solids is physically equivalent to choosing an Ohmic bath. We further match a real phonon DOS to a series of Lorentzian coupling functions, allowing us to determine coupling parameters for gold, yttrium iron garnet (YIG) and iron as examples. The results illustrate how to obtain material-specific dynamical properties, such as memory kernels. The proposed method opens the door to more accurate modelling of relaxation dynamics, for example for phonon-dominated spin damping in magnetic materials. Y1 - 2022 U6 - https://doi.org/10.1209/0295-5075/ac7b42 SN - 0295-5075 SN - 1286-4854 VL - 139 IS - 3 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Emma, Mattia A1 - Schianchi, Federico A1 - Pannarale, Francesco A1 - Sagun, Violetta A1 - Dietrich, Tim T1 - Numerical simulations of dark matter admixed neutron star binaries JF - Particles N2 - Multi-messenger observations of compact binary mergers provide a new way to constrain the nature of dark matter that may accumulate in and around neutron stars. In this article, we extend the infrastructure of our numerical-relativity code BAM to enable the simulation of neutron stars that contain an additional mirror dark matter component. We perform single star tests to verify our code and the first binary neutron star simulations of this kind. We find that the presence of dark matter reduces the lifetime of the merger remnant and favors a prompt collapse to a black hole. Furthermore, we find differences in the merger time for systems with the same total mass and mass ratio, but different amounts of dark matter. Finally, we find that electromagnetic signals produced by the merger of binary neutron stars admixed with dark matter are very unlikely to be as bright as their dark matter-free counterparts. Given the increased sensitivity of multi-messenger facilities, our analysis gives a new perspective on how to probe the presence of dark matter. KW - numerical relativity KW - dark matter KW - neutron stars KW - equation of state; KW - gravitational-wave astronomy KW - multi-messenger astrophysics Y1 - 2022 U6 - https://doi.org/10.3390/particles5030024 SN - 2571-712X VL - 5 IS - 3 SP - 273 EP - 286 PB - MDPI CY - Basel ER -