TY - THES A1 - Polyvyanyy, Artem T1 - Structuring process models T1 - Strukturierung von Prozessmodellen N2 - One can fairly adopt the ideas of Donald E. Knuth to conclude that process modeling is both a science and an art. Process modeling does have an aesthetic sense. Similar to composing an opera or writing a novel, process modeling is carried out by humans who undergo creative practices when engineering a process model. Therefore, the very same process can be modeled in a myriad number of ways. Once modeled, processes can be analyzed by employing scientific methods. Usually, process models are formalized as directed graphs, with nodes representing tasks and decisions, and directed arcs describing temporal constraints between the nodes. Common process definition languages, such as Business Process Model and Notation (BPMN) and Event-driven Process Chain (EPC) allow process analysts to define models with arbitrary complex topologies. The absence of structural constraints supports creativity and productivity, as there is no need to force ideas into a limited amount of available structural patterns. Nevertheless, it is often preferable that models follow certain structural rules. A well-known structural property of process models is (well-)structuredness. A process model is (well-)structured if and only if every node with multiple outgoing arcs (a split) has a corresponding node with multiple incoming arcs (a join), and vice versa, such that the set of nodes between the split and the join induces a single-entry-single-exit (SESE) region; otherwise the process model is unstructured. The motivations for well-structured process models are manifold: (i) Well-structured process models are easier to layout for visual representation as their formalizations are planar graphs. (ii) Well-structured process models are easier to comprehend by humans. (iii) Well-structured process models tend to have fewer errors than unstructured ones and it is less probable to introduce new errors when modifying a well-structured process model. (iv) Well-structured process models are better suited for analysis with many existing formal techniques applicable only for well-structured process models. (v) Well-structured process models are better suited for efficient execution and optimization, e.g., when discovering independent regions of a process model that can be executed concurrently. Consequently, there are process modeling languages that encourage well-structured modeling, e.g., Business Process Execution Language (BPEL) and ADEPT. However, the well-structured process modeling implies some limitations: (i) There exist processes that cannot be formalized as well-structured process models. (ii) There exist processes that when formalized as well-structured process models require a considerable duplication of modeling constructs. Rather than expecting well-structured modeling from start, we advocate for the absence of structural constraints when modeling. Afterwards, automated methods can suggest, upon request and whenever possible, alternative formalizations that are "better" structured, preferably well-structured. In this thesis, we study the problem of automatically transforming process models into equivalent well-structured models. The developed transformations are performed under a strong notion of behavioral equivalence which preserves concurrency. The findings are implemented in a tool, which is publicly available. N2 - Im Sinne der Ideen von Donald E. Knuth ist die Prozessmodellierung sowohl Wissenschaft als auch Kunst. Prozessmodellierung hat immer auch eine ästhetische Dimension. Wie das Komponieren einer Oper oder das Schreiben eines Romans, so stellt auch die Prozessmodellierung einen kreativen Akt eines Individuums dar. Somit kann ein Prozess auf unterschiedlichste Weise modelliert werden. Prozessmodelle können anschließend mit wissenschaftlichen Methoden untersucht werden. Prozessmodelle liegen im Regelfall als gerichtete Graphen vor. Knoten stellen Aktivitäten und Entscheidungspunkte dar, während gerichtete Kanten die temporalen Abhängigkeiten zwischen den Knoten beschreiben. Gängige Prozessmodellierungssprachen, zum Beispiel die Business Process Model and Notation (BPMN) und Ereignisgesteuerte Prozessketten (EPK), ermöglichen die Erstellung von Modellen mit einer beliebig komplexen Topologie. Es gibt keine strukturellen Einschränkungen, welche die Kreativität oder Produktivität durch eine begrenzte Anzahl von Modellierungsalternativen einschränken würden. Nichtsdestotrotz ist es oft wünschenswert, dass Modelle bestimmte strukturelle Eigenschaften haben. Ein bekanntes strukturelles Merkmal für Prozessmodelle ist Wohlstrukturiertheit. Ein Prozessmodell ist wohlstrukturiert genau dann, wenn jeder Knoten mit mehreren ausgehenden Kanten (ein Split) einen entsprechenden Knoten mit mehreren eingehenden Kanten (einen Join) hat, und umgekehrt, so dass die Knoten welche zwischen dem Split und dem Join liegen eine single-entry-single-exit (SESE) Region bilden. Ist dies nicht der Fall, so ist das Modell unstrukturiert. Wohlstrukturiertheit ist aufgrund einer Vielzahl von Gründen wünschenswert: (i) Wohlstrukturierte Modelle sind einfacher auszurichten, wenn sie visualisiert werden, da sie planaren Graphen entsprechen. (ii) Wohlstrukturierte Modelle zeichnen sich durch eine höhere Verständlichkeit aus. (iii) Wohlstrukturierte Modelle haben oft weniger Fehler als unstrukturierte Modelle. Auch ist die Wahrscheinlichkeit fehlerhafter Änderungen größer, wenn Modelle unstrukturiert sind. (iv) Wohlstrukturierte Modelle eignen sich besser für die formale Analyse, da viele Techniken nur für wohlstrukturierte Modelle anwendbar sind. (v) Wohlstrukturierte Modelle sind eher für die effiziente Ausführung und Optimierung geeignet, z.B. wenn unabhängige Regionen eines Prozesses für die parallele Ausführung identifiziert werden. Folglich gibt es eine Reihe von Prozessmodellierungssprachen, z.B. die Business Process Execution Language (BPEL) und ADEPT, welche den Modellierer anhalten nur wohlstrukturierte Modelle zu erstellen. Solch wohlstrukturiertes Modellieren impliziert jedoch gewisse Einschränkungen: (i) Es gibt Prozesse, welche nicht mittels wohlstrukturierten Prozessmodellen dargestellt werden können. (ii) Es gibt Prozesse, für welche die wohlstrukturierte Modellierung mit einer erheblichen Vervielfältigung von Modellierungs-konstrukten einhergeht. Aus diesem Grund vertritt diese Arbeit den Standpunkt, dass ohne strukturelle Einschränkungen modelliert werden sollte, anstatt Wohlstrukturiertheit von Beginn an zu verlangen. Anschließend können, sofern gewünscht und wo immer es möglich ist, automatische Methoden Modellierungsalternativen vorschlagen, welche "besser" strukturiert sind, im Idealfall sogar wohlstrukturiert. Die vorliegende Arbeit widmet sich dem Problem der automatischen Transformation von Prozessmodellen in verhaltensäquivalente wohlstrukturierte Prozessmodelle. Die vorgestellten Transformationen erhalten ein strenges Verhaltensequivalenzkriterium, welches die Parallelität wahrt. Die Resultate sind in einem frei verfügbaren Forschungsprototyp implementiert worden. KW - Strukturierung KW - Wohlstrukturiertheit KW - Prozesse KW - Verhalten KW - Modellierung KW - Structuring KW - Well-structuredness KW - Process KW - Behavior KW - Modeling Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59024 ER - TY - JOUR A1 - Ewelt-Knauer, Corinna A1 - Schwering, Anja A1 - Winkelmann, Sandra T1 - Probabilistic audits and misreporting BT - the influence of audit process design on employee behavior JF - European accounting review N2 - We investigate how the design of audit processes influences employees’ reporting decisions. We focus specifically on detective employee audits for which several employees are randomly selected after a defined period to audit their ex-post behavior. We investigate two design features of the audit process, namely, employee anonymity and process transparency, and analyze their impact on misreporting. Overall, we find that both components influence the extent of individuals’ misreporting. A nonanonymous audit decreases performance misreporting more than an audit in which the employee remains anonymous. Furthermore, the high incidence of performance misreporting in the case of anonymous audits can be decreased when the process transparency is low. Thus, our study informs accountants about how the two design features of employee anonymity and transparency of the audit process can be used to constrain performance misreporting to increase the efficiency of audits KW - Performance misreporting KW - Employee audits KW - Employee anonymity KW - Process KW - transparency Y1 - 2021 U6 - https://doi.org/10.1080/09638180.2021.1899014 SN - 1468-4497 SN - 0963-8180 VL - 30 IS - 5 SP - 989 EP - 1012 PB - Routledge CY - London ER - TY - JOUR A1 - Sandmann, Michael A1 - Münzberg, Marvin A1 - Bressel, Lena A1 - Reich, Oliver A1 - Hass, Roland T1 - Inline monitoring of high cell density cultivation of Scenedesmus rubescens in a mesh ultra-thin layer photobioreactor by photon density wave spectroscopy JF - BMC Research Notes / Biomed Central N2 - Objective Due to multiple light scattering that occurs inside and between cells, quantitative optical spectroscopy in turbid biological suspensions is still a major challenge. This includes also optical inline determination of biomass in bioprocessing. Photon Density Wave (PDW) spectroscopy, a technique based on multiple light scattering, enables the independent and absolute determination of optical key parameters of concentrated cell suspensions, which allow to determine biomass during cultivation. Results A unique reactor type, called "mesh ultra-thin layer photobioreactor" was used to create a highly concentrated algal suspension. PDW spectroscopy measurements were carried out continuously in the reactor without any need of sampling or sample preparation, over 3 weeks, and with 10-min time resolution. Conventional dry matter content and coulter counter measurements have been employed as established offline reference analysis. The PBR allowed peak cell dry weight (CDW) of 33.4 g L-1. It is shown that the reduced scattering coefficient determined by PDW spectroscopy is strongly correlated with the biomass concentration in suspension and is thus suitable for process understanding. The reactor in combination with the fiber-optical measurement approach will lead to a better process management. KW - Photon density wave spectroscopy KW - Multiple light scattering KW - Process KW - analytical technology KW - Fiber-optical spectroscopy KW - Mesh ultra-thin layer KW - photobioreactor Y1 - 2022 U6 - https://doi.org/10.1186/s13104-022-05943-2 SN - 1756-0500 VL - 15 IS - 1 PB - Biomed Central (London) CY - London ER - TY - BOOK A1 - Gerken, Stefanie A1 - Uebernickel, Falk A1 - de Paula, Danielly T1 - Design Thinking: a Global Study on Implementation Practices in Organizations T1 - Design Thinking: eine globale Studie über Implementierungspraktiken in Organisationen BT - Past - Present - Future BT - Vergangenheit - Gegenwart - Zukunft N2 - These days design thinking is no longer a “new approach”. Among practitioners, as well as academics, interest in the topic has gathered pace over the last two decades. However, opinions are divided over the longevity of the phenomenon: whether design thinking is merely “old wine in new bottles,” a passing trend, or still evolving as it is being spread to an increasing number of organizations and industries. Despite its growing relevance and the diffusion of design thinking, knowledge on the actual status quo in organizations remains scarce. With a new study, the research team of Prof. Uebernickel and Stefanie Gerken investigates temporal developments and changes in design thinking practices in organizations over the past six years comparing the results of the 2015 “Parts without a whole” study with current practices and future developments. Companies of all sizes and from different parts of the world participated in the survey. The findings from qualitative interviews with experts, i.e., people who have years of knowledge with design thinking, were cross-checked with the results from an exploratory analysis of the survey data. This analysis uncovers significant variances and similarities in how design thinking is interpreted and applied in businesses. N2 - Heutzutage ist Design Thinking kein "neuer Ansatz" mehr. Unter Praktikern und Akademikern hat das Interesse an diesem Thema in den letzten zwei Jahrzehnten stark zugenommen. Die Meinungen sind jedoch geteilt, ob Design Thinking lediglich "alter Wein in neuen Schläuchen" ist, ein vorübergehender Trend, oder ein sich weiterentwickelndes Phänomen, welches in immer mehr Organisationen und Branchen Fuß fast. Trotz der wachsenden Relevanz und Verbreitung von Design Thinking ist das Wissen über den tatsächlichen Status quo in Organisationen nach wie vor spärlich. Mit einer neuen Studie untersucht das Forschungsteam von Prof. Uebernickel, Stefanie Gerken und Dr. Danielly de Paula die zeitlichen Entwicklungen und Veränderungen von Design Thinking Praktiken in Organisationen über die letzten sechs Jahre und vergleicht die Ergebnisse der Studie "Parts without a whole" aus dem Jahr 2015 mit aktuellen Praktiken und perspektivischen Entwicklungen. An der Studie haben Unternehmen aller Größen und aus verschiedenen Teilen der Welt teilgenommen. Um dem komplexen Untersuchungsgegenstand gerecht zu werden, wurde eine Mixed-Method-Ansatz gewählt: Die Erkenntnisse aus qualitativen Experteninterviews, d.h. Personen, die sich seit Jahren mit dem Thema Design Thinking in der Praxis beschäftigen, wurden mit den Ergebnissen einer quantitativen Analyse von Umfragedaten abgeglichen. Die vorliegende Studie erörtert signifikante Unterschiede und Gemeinsamkeiten bei der Interpretation und Anwendung von Design Thinking in Unternehmen. KW - Design Thinking KW - Agile KW - Implementation in Organizations KW - life-centered KW - human-centered KW - Innovation KW - Behavior change KW - Problem Solving KW - Creative KW - Solution Space KW - Process KW - Mindset KW - Tools KW - Wicked Problems KW - VUCA-World KW - Ambiguity KW - Interdisciplinary Teams KW - Multidisciplinary Teams KW - Impact KW - Measurement KW - Ideation KW - Agilität KW - agil KW - Ambiguität KW - Verhaltensänderung KW - Kreativität KW - Design Thinking KW - Ideenfindung KW - Auswirkungen KW - Implementierung in Organisationen KW - Innovation KW - interdisziplinäre Teams KW - Messung KW - Denkweise KW - multidisziplinäre Teams KW - Problemlösung KW - Prozess KW - Lösungsraum KW - Werkzeuge KW - Aktivitäten KW - verzwickte Probleme KW - menschenzentriert KW - lebenszentriert KW - VUCA-World Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-534668 SN - 978-3-86956-525-5 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Grum, Marcus T1 - Construction of a concept of neuronal modeling N2 - The business problem of having inefficient processes, imprecise process analyses, and simulations as well as non-transparent artificial neuronal network models can be overcome by an easy-to-use modeling concept. With the aim of developing a flexible and efficient approach to modeling, simulating, and optimizing processes, this paper proposes a flexible Concept of Neuronal Modeling (CoNM). The modeling concept, which is described by the modeling language designed and its mathematical formulation and is connected to a technical substantiation, is based on a collection of novel sub-artifacts. As these have been implemented as a computational model, the set of CoNM tools carries out novel kinds of Neuronal Process Modeling (NPM), Neuronal Process Simulations (NPS), and Neuronal Process Optimizations (NPO). The efficacy of the designed artifacts was demonstrated rigorously by means of six experiments and a simulator of real industrial production processes. N2 - Die vorliegende Arbeit addressiert das Geschäftsproblem von ineffizienten Prozessen, unpräzisen Prozessanalysen und -simulationen sowie untransparenten künstlichen neuronalen Netzwerken, indem ein Modellierungskonzept zum Neuronalen Modellieren konstruiert wird. Dieses neuartige Konzept des Neuronalen Modellierens (CoNM) fungiert als flexibler und effizienter Ansatz zum Modellieren, Simulieren und Optimieren von Prozessen mit Hilfe von neuronalen Netzwerken und wird mittels einer Modellierungssprache, dessen mathematischen Formalisierung und technischen Substanziierung sowie einer Sammlung von neuartigen Subartefakten beschrieben. In der Verwendung derer Implementierung als CoNM-Werkzeuge können somit neue Arten einer Neuronalen-Prozess-Modellierung (NPM), Neuronalen-Prozess-Simulation (NPS) sowie Neuronalen-Prozess-Optimierung (NPO) realisiert werden. Die Wirksamkeit der erstellten Artefakte wurde anhand von sechs Experimenten demonstriert sowie in einem Simulator in realen Produktionsprozessen gezeigt. T2 - Konzept des Neuronalen Modellierens KW - Deep Learning KW - Artificial Neuronal Network KW - Explainability KW - Interpretability KW - Business Process KW - Simulation KW - Optimization KW - Knowledge Management KW - Process Management KW - Modeling KW - Process KW - Knowledge KW - Learning KW - Enterprise Architecture KW - Industry 4.0 KW - Künstliche Neuronale Netzwerke KW - Erklärbarkeit KW - Interpretierbarkeit KW - Geschäftsprozess KW - Simulation KW - Optimierung KW - Wissensmanagement KW - Prozessmanagement KW - Modellierung KW - Prozess KW - Wissen KW - Lernen KW - Enterprise Architecture KW - Industrie 4.0 Y1 - 2021 ER -