TY - JOUR A1 - Wang, Xuebin A1 - Wang, Xiaoli A1 - Hu, Jing A1 - Wang, Zhaoya A1 - Pimpalpalle, Tukaram M. A1 - Linker, Torsten A1 - Yin, Jian T1 - Study on the Synthesis of Novel Sugar Amino Acids T1 - 新型糖氨基酸类化合物的合成研究 JF - Acta chimica Sinica = Huaxue-xuebao N2 - Sugar amino acids (SAAs) are carbohydrate derivatives bearing both amino and carboxylic acid functional groups. SAAs represent an important class of multifunctional building blocks, which are amenable to serve as glycomimetics or peptidomimetics with well-defined structures and useful properties. Because SAAs exist in nature in many forms with various biological activities, recently, many unnatural SAAs, as the demand for finding new molecules to discover new drugs and new materials, have been designed and synthesized by a number of research groups. In this paper, we have developed a convenient method for the synthesis of novel SAAs gluco-7 and galacto-7 for the first time. The structure of gluco-7 was similar to the natural SAA glucosaminuronic acid that was a component of many typical bacterial cell walls and could be used for the preparation of type D flu vaccine; while galacto-7 was similar to the natural SAA galactosaminuronic acid that was one of bacterial Vi-antigen components of Escherichia coli. Starting from unexpensive and commercially available 3,4,6-tri-O-acetyl-D-glucal and 3,4,6-tri-O-acetyl-D-galactal, two novel SAAs gluco-7 and galacto-7 were achieved in the linear 6 steps with 34% overall yield and 19% overall yield, respectively. The key reactions included radical addition, decarboxylation, iodine generation reaction, azide reaction and reductive amination reaction. The crucial step was the synthesis of the target compound gluco-7 from gluco-6. By using method A, the target compound gluco-7 was obtained in 4 steps with 63% overall yield. To optimize the transformation from gluco-6 to gluco-7, method B was developed to generate gluco-7 by using one-pot reaction successfully with 76% yield only in one step. It proved that method B was superior to method A with shorter steps and higher yields. All the new compounds were characterized by IR, H-1 NMR, C-13 NMR and HRMS data. Study on the synthesis and biological evaluation of linear and cyclic oligomers derived from gluco-7 and galacto-7 are currently in progress. KW - sugar amino acids KW - glycal KW - radical addition KW - one-pot reaction KW - synthesis Y1 - 2015 U6 - https://doi.org/10.6023/A15030205 SN - 0567-7351 VL - 73 IS - 7 SP - 699 EP - 704 PB - Science China Press CY - Beijing ER - TY - GEN A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Reinecke, Antje A1 - Koetz, Joachim T1 - “Green” gold nanotriangles: synthesis, purification by polyelectrolyte/micelle depletion flocculation and performance in surface-enhanced Raman scattering N2 - The aim of this study was to develop a one-step synthesis of gold nanotriangles (NTs) in the presence of mixed phospholipid vesicles followed by a separation process to isolate purified NTs. Negatively charged vesicles containing AOT and phospholipids, in the absence and presence of additional reducing agents (polyampholytes, polyanions or low molecular weight compounds), were used as a template phase to form anisotropic gold nanoparticles. Upon addition of the gold chloride solution, the nucleation process is initiated and both types of particles, i.e., isotropic spherical and anisotropic gold nanotriangles, are formed simultaneously. As it was not possible to produce monodisperse nanotriangles with such a one-step procedure, the anisotropic nanoparticles needed to be separated from the spherical ones. Therefore, a new type of separation procedure using combined polyelectrolyte/micelle depletion flocculation was successfully applied. As a result of the different purification steps, a green colored aqueous dispersion was obtained containing highly purified, well-defined negatively charged flat nanocrystals with a platelet thickness of 10 nm and an edge length of about 175 nm. The NTs produce promising results in surface-enhanced Raman scattering. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 317 KW - morphological transformation KW - halide-ions KW - nanoparticles KW - shape KW - size KW - nanoprisms KW - vesicles KW - nanorods KW - silver KW - poly(ethyleneimine) Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394430 SP - 33561 EP - 33568 ER - TY - THES A1 - Raju, Rajarshi Roy T1 - ‘Smart’ Janus emulsions BT - preparation, characterization, and application as a template for aerogel preparation N2 - Emulsions constitute one of the most prominent and continuously evolving research areas in Colloid Chemistry, which involves the preparation of mixtures or dispersions of immiscible components in a continuous medium. Besides conventional oil-in-water or water-in-oil emulsions, other emulsions of complex droplet morphologies have recently attracted significant research interests. Especially Janus emulsions, in which each droplet is comprised of two distinct sub-regions, have shown versatile potential applications. One of their advantages is the possibility of compartmentalization, which enables to play with two different chemistries in a single droplet. Though microfluidic methods are conventionally used to prepare Janus emulsions, their industrial applications are largely hindered by low throughput and extensive instrumentations. Recently, it has been discovered that simply one-pot moderate/high energy emulsification is also capable of developing Janus morphology, although their preparation and stabilization remain rather substantially challenging. This cumulative doctoral thesis focuses on the preparation and characterization of ‘smart’ Janus emulsions, i.e. Janus emulsions with special stimuli-responsive features. One-step moderate/high energy emulsification of olive and silicone oil in an aqueous medium was carried out. Special consideration was devoted to the interfacial tensions among the components to maintain the criteria of forming characteristic droplet architectures, in addition to avoiding multiple emulsion destabilization phenomena like imminent phase separation or even separated droplet formation. A series of investigations were conducted related to the formation of complexes of charged macromolecules and role of them as stabilizers to achieve stable Janus emulsions for a realistic timeframe (more than 3 months). The correlation between the size of the stabilizer particles and the droplet size of emulsion was established. Furthermore, it was observed that Janus emulsion gels with interesting rheological properties can be fabricated in the presence of suitable polyelectrolyte complexes. Janus emulsions that could be influenced by pH, temperature or magnetic field were successfully produced in presence of characteristic stimuli-responsive stabilizers. Afterwards, the effect of these changes was studied by different characterization techniques. The size and morphology could be tuned easily by changing the pH. The incorporation of iron oxide magnetic nanoparticles (synthesized separately by a co-precipitation method) to one component of the Janus emulsion was carried out so that the movement and orientation of the complex droplets in aqueous media could be controlled by an external magnetic field. Additionally, temperature-triggered instantaneous reversible breakdown of Janus droplets was also accomplished. The responses of the Janus droplets by the stimuli were well-documented and explained. Another goal of the present contribution was to exploit this special morphological feature of emulsions as a template for producing porous materials. This was demonstrated by the preparation of ultralight magnetic responsive aerogels, utilizing Janus emulsion gels. The produced aerogels also showed the capacity to separate toxic dye from water. To the best of our knowledge, this is the first example of investigation towards batch scale production of Janus emulsion with such special stimuli-responsive properties by a simple bulk emulsification method. N2 - Emulsionen bilden eines der bekanntesten und sich ständig weiterentwickelnden Forschungsgebiete in der Kolloidchemie. Dabei werden Gemische oder Dispersionen nicht miteinander mischbarer Komponenten in einem kontinuierlichen Medium hergestellt. Neben den herkömmlichen Öl-in-Wasser- oder Wasser-in-Öl-Emulsionen gewinnen in letzter Zeit andere Emulsionen mit komplexeren Tröpfchenmorphologien zunehmend an Forschungsinteresse. Hier sind vor allem Janus-Emulsionen, zu nennen, die aus zwei nicht mischbaren Ölkomponenten, dispergiert in einem wässerigen Medium, bestehen. Da jedes Tröpfchen aus zwei unterschiedlichen Kompartimenten gebildet wird, besteht hier die Möglichkeit gezielt mit der Chemie der Tröpschenbestandteile zu spielen. Obwohl mikrofluidische Verfahren üblicherweise zur Herstellung von Janus-Emulsionen verwendet werden, finden diese nur begrenzt Anwendung in der Industrie aufgrund des geringen Durchsatzes. Kürzlich wurde entdeckt, dass mit einer einfachen Eintopf-Emulgierung bei mittlerer/hoher Energie auch die Janus-Morphologie erzeugt werden kann. Die Herstellung und Stabilisierung der Emulsionen unter Anwendung dieser Methode bleibt jedoch eine große Herausforderung. Der Fokus dieser kumulativen Doktorarbeit konzentriert sich auf die Herstellung und Charakterisierung von „smarten“ Janus-Emulsionen. Diese sind zum Beispiel Janus-Emulsionen, die auf spezielle Reize/Stimuli reagieren. Eine einstufige Emulgierung mit mittlerer/hoher Energie von Oliven- und Silikonöl wurde im wässrigen Medium durchgeführt. Besonderes Augenmerk wurde auf die Grenzflächenspannungen zwischen den Komponenten gelegt, um die Kriterien für die Bildung charakteristischer Tröpfchenarchitekturen beizubehalten und um mehrfache Emulsionsdestabilisierungsphänomene wie eine Phasentrennung oder sogar eine getrennte Tröpfchenbildung zu vermeiden. Eine Reihe von Untersuchungen bezog sich auf die Bildung von Komplexen geladener Makromoleküle und deren Rolle als Stabilisatoren, um stabile Janus-Emulsionen über einen realistischen Zeitraum (länger als 3 Monate) zu erzielen. Dabei wurde eine Korrelation zwischen der Größe der Komplexe und der Tröpfchengröße festgestellt. Weiterhin konnte gezeigt werden, dass Janus-Emulsionsgele mit interessanten rheologischen Eigenschaften in Gegenwart geeigneter Polyelektrolytkomplexe hergestellt werden können. Temperatur und pH-Wert erwiesen sich als Stimulatoren für ausgewählte polymerstabilisierte Janus Emulsionen. Anschließend wurde die Auswirkung dieser Stimuli durch verschiedene Charakterisierungsmethoden untersucht. Dabei konnten die Größe und die Morphologie durch die Änderung des pH-Wertes eingestellt werden. Durch die Einfügung von magnetischen Eisenoxid-Nanopartikeln in eine der Komponenten der Janus-Emulsion konnten die Orientierung und die Bewegung der Tröpfchen durch ein externes Magnetfeld gesteuert werden. Zusätzlich konnte ein temperaturabhängiger sofortiger reversibler Zusammenfall von Janus-Tröpfchen gezeigt werden.. Ein weiteres Ziel des vorliegenden Arbeit war es, dieses spezielle morphologische Merkmal von Emulsionen als Vorlage für die Herstellung poröser Materialien zu nutzen. Dies wurde durch die Herstellung von ultraleichten magnetischen Aerogelen unter Verwendung von Janus-Emulsionsgelen demonstriert. Die hergestellten Aerogele zeigten die Fähigkeit toxischen Farbstoff von Wasser abzutrennen. Nach unserem besten Wissen ist dies das erste Beispiel für eine Untersuchung zur Herstellung von Janus-Emulsionen im Chargenmaßstab mit solchen speziellen Reiz/Stimuli responsiven Eigenschaften durch ein einfaches Emulgierungsverfahren. KW - janus emulsion KW - emulsion KW - magnetic nanoparticles KW - aerogel KW - stimul-responsive KW - stimul-responsive emulsion KW - pH-responsive KW - temperature-responsive Y1 - 2021 ER - TY - THES A1 - Sand, Patrick T1 - Übergangsmetallkatalysierte Funktionalisierungsreaktionen an Vinylsulfonylverbindungen T1 - Transition metal catalysed functionalisation of vinyl sulfonyl compounds N2 - Innerhalb dieser Arbeit erfolgte die erstmalige systematische Untersuchung von Vinylsulfonsäureethylester (1a), Phenylvinylsulfon (1b), N-Benzyl-N-methylethensulfonamid (1c) in der FUJIWARA-MORITANI Reaktion (alternativ als DHR bezeichnet). Bei dieser übergangsmetallkatalysierten Reaktion erfolgt der Aufbau einer neuen C-C-Bindung unter der doppelten Aktivierung einer C-H-Bindung. Somit kann ein atomökonomischer Aufbau von Molekülen realisiert werden, da keine Beiprodukte in Form von Salzen entstehen. Als aromatischer Reaktant wurden Acetanilide (2) verwendet, damit eine regiospezifische Kupplung durch die katalysatordirigierende Acetamid-Gruppe (CDG) erfolgt. Für die Pd-katalysierte DHR wurde eine umfangreiche Optimierung durchgeführt und anschließend konnten neun verschieden, substituierte 2 mit 1a und sieben verschieden, substituierte 2 mit 1b funktionalisiert werden. Da eine Reaktion mit 1c ausblieb, erfolgte ein Wechsel auf eine Ru-katalysierte Methode für die DHR. Mit dieser Methode konnte 1c mit Acetaniliden funktionalisiert werden und das Spektrum der verwendeten 2, in Form von deaktivierenden Substituenten erweitert werden. Im Anschluss wurden die sulfalkenylierten Acetanilide in weiterführenden Reaktionen untersucht. Hierfür wurde eine Reaktionssequenz bestehend aus einer DeacetylierungDiazotierung-Kupplungsreaktion verwendet, um die Acetamid-Gruppe in eine Abgangsgruppe zu überführen und danach in einer MATSUDA-HECK Reaktion zu kuppeln. Mit dieser Methode konnten mehrere 1,2-Dialkenylbenzole erhalten werden und die CDG ein weiteres Mal genutzt werden. Neben der Überführung der CDG in eine Abgangsgruppe konnte diese auch in die Synthese verschiedener Heterozyklen integriert werden. Dafür erfolgte zunächst eine 1,3-Zykloaddition durch deprotonierten Tosylmethylisocanid an der elektronenarmen Sulfalkenylgruppe zur Synthese von Pyrrolen. Anschließend erfolgte eine Kupplung der PyrrolFunktion und der CDG durch Zyklokondensation, wodurch Quinoline dargestellt wurden. Durch diese Synthesen konnten Schwefelanaloga des Naturstoffes Marinoquionolin A erhalten werden. Ein weitere übergangsmetallkatalysierte C-H-Aktivierungsreaktion, die MATSUDA-HECK Reaktion, wurde genutzt, um 1b zu mit verschieden, subtituierten Diazoniumsalzen zu arylieren. Hier konnten zahlreichen Styrenylsulfone erhalten werden. Der erfolgreiche Einsatz der Vinylsulfonylverbindungen in der Kreuzmetathese konnte innerhalb dieser Arbeit nicht erreicht werden. Daher erfolgte die Synthese verschiedener dialkenylierter Sulfonamide. Hierfür wurde die Kettenlänge der Alkenyl-Gruppe am Schwefel zwischen 2-3 und am Stickstoff zwischen 3-4 variiert. Der Einsatz der dialkenylierten Sulfonamide erfolgte in den zuvor untersuchten C-H-Aktivierungsmethoden. N-Allyl-N-phenylethensulfonamid (3) konnte erfolgreich in der DHR und HECK Reaktion funktionalisiert werden. Hierbei erfolgte eine methodenspezifische Kupplung in Abhängigkeit von der Elektronendichte der entsprechenden Alkenyl-Gruppe. Die DHR führte zur selektiven Arylierung der Vinyl-Gruppe und die HECK Reaktion zur Arylierung an der Allyl-Gruppe. Gemischte Produkte wurden nicht erhalten. Für die weiteren Diolefine wurde komplexe Produktgemische erhalten. Des Weiteren wurden die Diolefine in der Ringschlussmetathese untersucht und die entsprechenden Sultame in sehr guten Ausbeuten erhalten. Die Verwendung der Sultame in der C-H-Aktivierung war erfolglos. Es wird vermutet, dass für diese zweifachsubstituierten Sulfonamide die vorhandenen Reaktionsbedingungen optimiert werden müssen. Abschließend wurden verschiedene, enantiomerenreine Olefine ausgehend von Levoglucosenon dargestellt. Hierfür wurde Levoglucosenon zunächst mit einem Allyl- und 3-Butenylgrignard Reagenz umgesetzt. Die entsprechenden Produkte wurden in moderaten Ausbeuten erhalten. Eine weitere Methode begann mit der Reduktion von Levoglucosenon zum Levoglucosenol. Dieser Alkohol wurde mit Allylbromid erfolgreich verethert. Neben der Untersuchungen zur Ethersynthese, erfolgte die Veresterung von Levoglucosenol mit verschiedenen Sulfonylchloriden zu den entsprechenden Sulfonsäureestern. Diese Olefine wurden in einer Dominometathesereaktion untersucht. Ausgehend vom Allyllevoglucosenylether erfolgte die Darstellung eines Dihydrofurans. N2 - Within this work, the first systematic investigation of vinyl sulfonic acid ethyl ester (1a), phenyl vinyl sulfone (1b), N-benzyl-N-methylethene sulfonamide (1c) in the FUJIWARA-MORITANI reaction (alternatively referred to as DHR) was carried out. In this transition metal-catalysed reaction, the formation of a new C-C bond takes place through double activation of a C-H bond. Therefore, an atom-economical construction of molecules can be realised without the formation of by-products in the form of salts. Acetanilides (2) were used as aromatic reactants so that a regiospecific coupling by the catalyst-directing acetamide group (CDG) takes place. An extensive optimisation was carried out for the Pd catalysed DHR and subsequently nine differently substituted 2 could be functionalised with 1a and seven differently substituted 2 with 1b. Since a reaction with 1c failed to occur, a switch was made to a Ru-catalysed method for the DHR. With this method, 1c could be functionalised with acetanilides (2) and the spectrum of the acetanilides (2) used could be expanded to deactivating substituents. Subsequently, the sulfalkenylated acetanilides were investigated in further reactions. For this purpose, a reaction sequence consisting of a deacetylation-diazotisation-coupling reaction was used to convert the acetamide group into a leaving group and then to couple it in a MATSUDA-HECK reaction. With this method, several 1,2-dialkenylbenzenes could be obtained and the CDG was used one more time. In addition to transferring the CDG into a leaving group, it could also be integrated into the synthesis of various heterocycles. First, a 1,3 cycloaddition was carried out by deprotonated tosylmethylisocanide on the electron-deficient sulfalkenyl group for the synthesis of pyrroles. This was followed by coupling of the pyrrole function and the CDG by cyclocondensation, producing quinolines. Through these syntheses, sulfur analogues of the natural product marinoquionoline A could be obtained. Another transition metal-catalysed C-H activation reaction, the MATSUDA-HECK reaction, was used to arylate 1b with different subtituted aryldiazonium salts. Numerous styrenyl sulfones were obtained. Vinylsulfonyl compounds could not be used in cross-metathesis reactions within this work. Therefore, the synthesis of different dialkenylated sulfonamides was carried out. For this purpose, the chain length of the alkenyl group was varied between 2-3 at the sulfur atom and 3-4 at the nitrogen atom. The dialkenylated sulfonamides were used in the previously investigated C-H activation methods. N-allyl-N-phenylethensulfonamide (3) was successfully functionalised using the DHR and HECK reaction. Here, a method-specific coupling took place depending on the electron density of the corresponding alkenyl group. The DHR led to selective arylation at the vinyl group and the HECK reaction to selective arylation at the allyl group. Mixed products were not obtained. For the other diolefins, complex mixtures of products were obtained. Furthermore, the diolefins were investigated in ring closing metathesis reaction and the corresponding sultams were obtained in very good yields. The use of the synthesised sultams in C-H activation was unsuccessful. It is suggested that for these di-substituted sulfonamides the existing reaction conditions need to be optimised. Finally, various enantiomerically pure olefins were prepared starting from levoglucosenone. For this purpose, levoglucosenone was first reacted with an allyl-Grignard and 3 butenyl-Grignard reagent. The corresponding products were obtained in moderate yields. Another method started with the reduction of levoglucosenone to levoglucosenol. This alcohol was successfully etherified with allyl bromide. In addition to the studies on ether synthesis, the esterification of levoglucosenol with various sulfonyl chlorides to the corresponding sulfonic acid esters was carried out. These olefins were investigated in a domino metathesis reaction. Starting with allyl levoglucosenyl ether, the synthesis of a dihydrofuran was presented. KW - Vinylsulfonylverbindungen KW - Übergangsmetallkatalyse KW - vinyl sulfonyl compounds KW - transition metal catalysis Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-536879 ER - TY - THES A1 - Hörnke, Maria T1 - ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces BT - ß-Sheet formation of amyloidogenic model peptides at hydrophobic-hydrophilic interfaces Y1 - 2011 CY - Potsdam ER - TY - GEN A1 - Anton, Peter A1 - Laschewsky, André T1 - Zwitterionic polysoaps with reduced density of surfactant side groups N2 - Several zwitterionic polymers were prepared by radical homopolymerization of surfactant monomers which bear diallyl, diene or vinylcyclopropane moieties. These polymer systems were complemented by alternating copolymers of appropriate zwitterionic vinyl compounds. Thus, polymers with reduced (as compared with simple vinylic homopolymers, or statistical copolymers) and well defined density of surfactant side groups are obtained. The solubilities found for these polymers are dominated by polymer geometry rather than by the balance of hydrophilic and hydrophobic fragments, thus corroborating a main-chain spacer model proposed recently. All water-soluble polymers exhibit characteristic features of classical polysoaps, as shown by surface tension measurements and by solubilization of hydrophobic dyes. In contrast, the water-insoluble copolymers are capable to form stable monolayers at the air-water interface. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 091 Y1 - 1993 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17301 ER - TY - THES A1 - Janietz, Silvia T1 - Zusammnenhänge zwischen Struktur, elektrochemischem Redoxverhalten und dem Einsatz von organischen Halbleitern in der Elektronik Y1 - 2002 ER - TY - JOUR A1 - Thomas, Steffen A1 - Kleinpeter, Erich T1 - Zur Zuordnung der 13C-Chemischen Verschiebungen substituierter Naphthaline aus Ladungsdichten mit Hilfe eines neuronalen Netzes Y1 - 1995 ER - TY - JOUR A1 - Hermanns, Jolanda A1 - Schmidt, Bernd T1 - Zur Verwendung von QR-Codes in Uni-Seminaren – ein Baustein in den neu konzipierten Übungen zur Vorlesung „Organische Chemie für Studierende im Nebenfach“ T1 - The use of QR-Codes in university courses - a building block of the newly constructed accompanying exercises for the lecture "organic chemistry" for chemistry minors JF - Chemkon N2 - Die Verwendung von QR-Codes in Begleitseminaren zur Vorlesung „Organische Chemie“ für Studierende mit Chemie im Nebenfach wird vorgestellt. Die Hausaufgaben zu den Seminaren wurden mit einem QR-Code versehen. Dieser führt zu weiterführenden Hilfen. Der Einsatz der QR-Codes sowie die Neukonzeption der Seminare wurden evaluiert. N2 - The use of QR-Codes in university courses for the lecture "Organic Chemistry" for minor students is presented. The homework to the seminars includes a QR-Code. This code leads to supporting learning aids. The use of the QR-Codes as the new concept into seminars is evaluated. KW - graded learning aids KW - homework KW - Chemical exercises KW - QR-Code Y1 - 2017 U6 - https://doi.org/10.1002/ckon.201710300 SN - 0944-5846 SN - 1521-3730 VL - 24 SP - 139 EP - 141 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Peter, Martin G. A1 - Förster, Hans T1 - Zur Struktur von Eumelaninen : Identifizierung von Konstitutionsmustern durch Festkörper-NMR-Spektroskopie T1 - On the Structure of Eumelanins : Identification of Constitutional Patterns by Solid-state NMR Spectroscopy N2 - Aus dem Inhalt: Melanine sind komplexe polyphenolische Polymere. In der Natur entstehen sie durch meist enzymkatalysierte oxidative Polymerisation von o-Diphenolen. Man unterscheidet die aus Dopa 1 oder Dopamin 3 hervorgehenden, tiefschwarzen Eumelanine von den aus Dopa in Gegenwart von Cystein entstehenden, gelben bis braunen Phaomelaninen. [...] T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 054 Y1 - 1989 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17038 ER - TY - JOUR A1 - Ströhl, D. A1 - Kleinpeter, Erich T1 - Zur Stereochemie acyclischer Verbindungen : III. Bestimmung der Vorzugskonformstion unterschiedlich substituirternY-Chlorpropylether Y1 - 1993 ER - TY - GEN A1 - Breternitz, Joachim A1 - Lehmann, Frederike A1 - Barnett, Sarah A. A1 - Nowell, Harriott A1 - Schorr, Susan T1 - Zur Rolle der Iodid-Methylammonium-Interaktion in der Ferroelektrizität in CH3NH3PbI3 T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Ihre außergewöhnlich hohen Konversionseffizienzen von über 20 % und die einfache Zellherstellung machen Hybridperowskite zu heißen Kandidaten für alternative Solarzellenmaterialien. CH3NH3PbI3 als Archetyp dieser Materialklasse besitzt außergewöhnliche Eigenschaften wie eine sehr effiziente Umwandlung von Solarenergie, wobei besonders Ferroelektrizität als mögliche Erklärung in den Fokus gerückt ist. Diese erfordert allerdings eine nicht-zentrosymmetrische Kristallstruktur als notwendige Voraussetzung. Wir stellen hier eine Erklärung des Symmetriebruchs in diesem Material auf kristallographischem, d. h. fernordnungs-basiertem, Wege vor. Während das Molekülkation CH3NH3+ intrinsisch polar ist, ist es extrem fehlgeordnet und kann deshalb nicht die einzige Erklärung darstellen. Es verzerrt allerdings das umgebende Kristallgitter und ruft dadurch eine Verschiebung der Iod-Atome von den zentrosymmetrischen Positionen hervor. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1199 KW - ferroelectricity KW - hybrid perovskites KW - inorganic chemistry KW - photovoltaic materials KW - structure elucidation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525674 SN - 1866-8372 IS - 1 ER - TY - JOUR A1 - Breternitz, Joachim A1 - Lehmann, Frederike A1 - Barnett, Sarah A. A1 - Nowell, Harriott A1 - Schorr, Susan T1 - Zur Rolle der Iodid-Methylammonium-Interaktion in der Ferroelektrizität in CH3NH3PbI3 JF - Angewandte Chemie N2 - Ihre außergewöhnlich hohen Konversionseffizienzen von über 20 % und die einfache Zellherstellung machen Hybridperowskite zu heißen Kandidaten für alternative Solarzellenmaterialien. CH3NH3PbI3 als Archetyp dieser Materialklasse besitzt außergewöhnliche Eigenschaften wie eine sehr effiziente Umwandlung von Solarenergie, wobei besonders Ferroelektrizität als mögliche Erklärung in den Fokus gerückt ist. Diese erfordert allerdings eine nicht-zentrosymmetrische Kristallstruktur als notwendige Voraussetzung. Wir stellen hier eine Erklärung des Symmetriebruchs in diesem Material auf kristallographischem, d. h. fernordnungs-basiertem, Wege vor. Während das Molekülkation CH3NH3+ intrinsisch polar ist, ist es extrem fehlgeordnet und kann deshalb nicht die einzige Erklärung darstellen. Es verzerrt allerdings das umgebende Kristallgitter und ruft dadurch eine Verschiebung der Iod-Atome von den zentrosymmetrischen Positionen hervor. KW - ferroelectricity KW - hybrid perovskites KW - inorganic chemistry KW - photovoltaic materials KW - structure elucidation Y1 - 2019 VL - 132 IS - 1 PB - John Wiley & Sons, Inc. CY - New Jersey ER - TY - THES A1 - Utecht, Manuel Martin T1 - Zur Optimierung und dem Auslesen molekularer Schalter BT - quantenchemische Untersuchungen an vier Beispielen Y1 - 2015 ER - TY - THES A1 - Priester, Torsten T1 - Zur Lösung eines thermodynamischen Phänomens der Adsorption amphiphiler Stoffe an fluiden Phasengrenzflächen : die lineare Abhängigkeit der Gleichgewichtsoberflächenspannung vom Logarithmus der Volumenkonzentration T2 - UFO Dissertation Y1 - 1999 SN - 3-930803-71-2 VL - 372 PB - UFO Atelier für Gestaltung und Verl. CY - Allensbach ER - TY - THES A1 - Fandrich, Nick T1 - Zur Charakterisierung von amphiphilen Blockcopolymeren aus N-Vinylpryrrolidon und Vinylacetat Y1 - 2009 CY - Potsdam ER - TY - JOUR A1 - Schmidt, Joachim A1 - Bechmann, Wolfgang T1 - Zur Anwendung des Skalarprodukts von Kraft und Weg auf reversible Prozesse (Druck-Volumen-Änderung, Dehnung, Elektrostatische Wechselwirkung, Hub) T1 - To the application of the scalar product of force and displacement to reversible processes (pressure-volume change, elongation, electrostatic interaction, raising) BT - die Verwendung äußerer oder systemimmanenter Kräfte BT - the use of external or system-immanent forces N2 - Wir schlagen einen allgemein anwendbaren Algorithmus vor, der unter Verwendung des Skalarprodukts von Kraft und Weg zum richtigen Vorzeichen in den Gleichungen für die Arbeit und die Potentielle Energie bei reversiblen Prozessen (Druck-Volumen-Änderung, Dehnung, Elektrostatische Wechselwirkung, Hub)führt. Wir zeigen, dass es dabei möglich ist, systemimmanente oder externe Kräfte zu benutzen. Wir zeigen, dass bei Verwendung von systemimmanenten Kräften das Skalarprodukt mit negativem Vorzeichen anzusetzen ist. Zudem ist es sehr wichtig, nötige Vorzeichenwechsel bei den einzelnen Schritten zu beachten. Wir betonen dies, weil gelegentlich übersehen wird, dass ein Vorzeichenwechsel nötig ist, wenn das Wegdifferential ds durch das Höhendifferential dh beziehungsweise durch das Abstandsdifferential dx oder dr ersetzt werden muss. KW - Skalarprodukt von Kraft und Weg KW - systemimmanente Kräfte KW - Druck-Volumen-Änderung KW - Dehnung KW - Elektrostatische Wechselwirkung KW - Gravitation KW - scalar product of force and displacement KW - system-immanent forces KW - pressure-volume change KW - elongation KW - electrostatic interaction KW - gravitation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-69732 ER - TY - THES A1 - Schilde, Uwe T1 - Zur Abtrennung von Oxoanionen mittels chelatbildender Ionenaustauscher Y1 - 1992 ER - TY - JOUR A1 - Schröder, Martina A1 - Kümmel, Rolf A1 - Mickler, Wulfhard A1 - Uhlemann, Erhard T1 - Zur Abtrennung von Kupfer aus ammoniakalischer Lösung durch Flüssig-Flüssig-Extraktion und Flüssigmembranpermeation mit 1-Phenyl-3-methyl-4-stearoylpyrazol-5-on Y1 - 1991 ER - TY - THES A1 - Grobosch, Thomas T1 - Zur Abtrennung von Arsen und anderen Schwermetallen mit Ionenaustauschern und imprägnierten Adsorberpolymeren Y1 - 1997 CY - Potsdam ER - TY - THES A1 - Kraudelt, Heide T1 - Zur Abtrennung komplexer Anionen mit dem chelatbildenden Ionenaustauscher Wofatit MK 51 Y1 - 1997 CY - Potsdam ER - TY - JOUR A1 - Koetz, Joachim A1 - Kosmella, Sabine A1 - Kulicke, Werner-Michael A1 - Heinze, Thomas T1 - Zum Einfluss des Lösungszustandes von Carboxymethylcellulosen auf das Strukturbildungsverhalten in kolloidalen Systemen Y1 - 2002 ER - TY - JOUR A1 - Uhlemann, Erhard A1 - Banße, Wolfgang A1 - Ludwig, Eberhard A1 - Mehner, Hartmut A1 - Zeigan, Dieter T1 - Zinn(IV)-Komplexe mit dreizähnigen diaciden Liganden - 119Sn-NMR und 119mSN-Mössbauer- spektroskopische Untersuchungen Y1 - 1994 ER - TY - JOUR A1 - Greue, Th. A1 - Barberka, Thomas Andreas A1 - Pietsch, Ullrich A1 - Stumpe, Joachim A1 - Kauppe, G. T1 - Zeitaufgelöste Untersuchungen an Photochromen LB-Multischichten mittels energiedispersiver Röntgenkleinwinkelstreuung, in-plane Beugung und AFM Y1 - 1995 ER - TY - JOUR A1 - Guiet, Amandine A1 - Unmüssig, Tobias A1 - Göbel, Caren A1 - Vainio, Ulla A1 - Wollgarten, Markus A1 - Driess, Matthias A1 - Schlaad, Helmut A1 - Polte, Jörg A1 - Fischer, Anna T1 - Yolk@Shell Nanoarchitectures with Bimetallic Nanocores - Synthesis and Electrocatalytic Applications JF - Earth & planetary science letters KW - AgAu alloy nanoparticles KW - tin-rich ITO KW - yolk@shell materials KW - nanoreactor KW - soft-templating KW - inverse micelles KW - polystyrene-block-poly(4-vinylpyridine) Y1 - 2016 U6 - https://doi.org/10.1021/acsami.6b06595 SN - 1944-8244 VL - 8 SP - 28019 EP - 28029 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Koch, Andreas T1 - Y-aromaticity - existing: yes or no? An answer given on the magnetic criterion (TSNMRS) JF - Tetrahedron N2 - The spatial magnetic properties (Through Space NMR Shieldings - TSNMRS) of a number of Y-shaped structures possessing 4n+2 pi-electrons (i.a. the trimethylenemethane ions TMM2+, TMM2-, the guanidinium cation, substituted and hetero analogues) have been computed, visualized as Isochemical Shielding Surfaces (ICSS) of various size and direction, were examined subject to present Y-aromaticity and the results compared with energetic and geometric criteria obtained already. (C) 2016 Elsevier Ltd. All rights reserved. KW - Y-aromaticity KW - pi-Electron delocalization KW - Theoretical calculations KW - ICSS KW - TSNMRS Y1 - 2016 U6 - https://doi.org/10.1016/j.tet.2016.02.020 SN - 0040-4020 VL - 72 SP - 1675 EP - 1685 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Gorfman, Semen A1 - Tsirelson, Vladimir A1 - Pucher, Andreas A1 - Morgenroth, Wolfgang A1 - Pietsch, Ullrich T1 - X-ray diffraction by a crystal in a permanent external electric field : electric-field-induced structural response in alpha-GaPO4 N2 - For the first time, site-selective distortion has been investigated for two different structural units in the ternary compound alpha-GaPO4 under the influence of a permanent external electric field. Based on 54 measured reflection intensities, the electric-field-induced distortion of PO4 and GaO4 tetrahedra in alpha-GaPO4 crystals is evaluated using a model of pseudoatomic displacements introduced recently [Gorfman, Tsirelson & Pietsch (2005). Acta Cryst. A61, 387- 396]. A stronger variation of the P-O bond lengths in the PO4 tetrahedron was found compared to the bonds in the GaO4 tetrahedron. The different distortions of the tetrahedra owing to the electric field were analysed in terms of the valence charge density of alpha-GaPO4 and its topological characteristics. The larger charge of the P pseudoatom compared to the Ga atom was recognized as the main reason for the higher sensitivity of the PO4 tetrahedron to a permanent external electric field Y1 - 2006 UR - http://onlinelibrary.wiley.com/journal/10.1111/(ISSN)1600-5724 U6 - https://doi.org/10.1107/S0108767305036111 SN - 0108-7673 ER - TY - THES A1 - Ermeydan, Mahmut Ali T1 - Wood cell wall modification with hydrophobic molecules T1 - Modifikation von Holzzellwänden durch hydrophobe Moleküle N2 - Wood is used for many applications because of its excellent mechanical properties, relative abundance and as it is a renewable resource. However, its wider utilization as an engineering material is limited because it swells and shrinks upon moisture changes and is susceptible to degradation by microorganisms and/or insects. Chemical modifications of wood have been shown to improve dimensional stability, water repellence and/or durability, thus increasing potential service-life of wood materials. However current treatments are limited because it is difficult to introduce and fix such modifications deep inside the tissue and cell wall. Within the scope of this thesis, novel chemical modification methods of wood cell walls were developed to improve both dimensional stability and water repellence of wood material. These methods were partly inspired by the heartwood formation in living trees, a process, that for some species results in an insertion of hydrophobic chemical substances into the cell walls of already dead wood cells, In the first part of this thesis a chemistry to modify wood cell walls was used, which was inspired by the natural process of heartwood formation. Commercially available hydrophobic flavonoid molecules were effectively inserted in the cell walls of spruce, a softwood species with low natural durability, after a tosylation treatment to obtain “artificial heartwood”. Flavonoid inserted cell walls show a reduced moisture absorption, resulting in better dimensional stability, water repellency and increased hardness. This approach was quite different compared to established modifications which mainly address hydroxyl groups of cell wall polymers with hydrophilic substances. In the second part of the work in-situ styrene polymerization inside the tosylated cell walls was studied. It is known that there is a weak adhesion between hydrophobic polymers and hydrophilic cell wall components. The hydrophobic styrene monomers were inserted into the tosylated wood cell walls for further polymerization to form polystyrene in the cell walls, which increased the dimensional stability of the bulk wood material and reduced water uptake of the cell walls considerably when compared to controls. In the third part of the work, grafting of another hydrophobic and also biodegradable polymer, poly(ɛ-caprolactone) in the wood cell walls by ring opening polymerization of ɛ-caprolactone was studied at mild temperatures. Results indicated that polycaprolactone attached into the cell walls, caused permanent swelling of the cell walls up to 5%. Dimensional stability of the bulk wood material increased 40% and water absorption reduced more than 35%. A fully biodegradable and hydrophobized wood material was obtained with this method which reduces disposal problem of the modified wood materials and has improved properties to extend the material’s service-life. Starting from a bio-inspired approach which showed great promise as an alternative to standard cell wall modifications we showed the possibility of inserting hydrophobic molecules in the cell walls and supported this fact with in-situ styrene and ɛ-caprolactone polymerization into the cell walls. It was shown in this thesis that despite the extensive knowledge and long history of using wood as a material there is still room for novel chemical modifications which could have a high impact on improving wood properties. N2 - Der nachwachsende Rohstoff Holz wird aufgrund seiner guten mechanischen Eigenschaften und der leichten Verfügbarkeit für viele Anwendungszwecke genutzt. Quellen und Schrumpfen bei Feuchtigkeitsänderungen des hygroskopischen Werkstoffs Holz limitieren jedoch die Einsatzmöglichkeiten. Ein weiteres Problem stellt der mitunter leichte Abbau – u.a. bei feuchtem Holz - durch Mikroorganismen und/oder Insekten dar. Durch chemische Modifizierungen können die Dimensionsstabilität, die Hydrophobizität und die Dauerhaftigkeit verbessert und damit die potentielle Lebensdauer des Werkstoffes erhöht werden. Dabei ist die dauerhafte Modifikation der Zellwand nur äußerst schwer realisierbar. Inspiriert von der Kernholzbildung in lebenden Bäumen, ein zellwandverändernder Prozess, der Jahre nach der Holzbildung erfolgt, wurden im Rahmen dieser Arbeit neue Ansätze zur chemischen Modifizierung der Zellwände entwickelt, um die Dimensionsstabilität und Hydrophobizität zu erhöhen. Der erste Teil der Arbeit ist stark vom Prozess der Kernholzbildung inspiriert, eine abgeleitete Chemie wurde verwendet, um die Zellwände von Fichte, einem Nadelholz von geringer natürlicher Dauerhaftigkeit, zu modifizieren. Kommerziell verfügbare hydrophobe Flavonoide wurden nach einem Tosylierungsschritt erfolgreich in die Zellwand eingebracht, um so „artifizielles Kernholz“ zu erzeugen. Die modifizierten Holzproben zeigten eine verringerte Wasseraufnahme, die zu erhöhter Dimensionsstabilität und Härte führte. Dieser Ansatz unterscheidet sich grundlegend von bereits etablierten Modifikationen, die hauptsächlich hypdrophile Substanzen an die Hydroxylgruppen der Zellwand anlagern. Der zweite Teil der Arbeit beschäftigt sich mit der Polymerisation von Styren in tosylierten Zellwänden. Es ist bekannt, dass es nur eine schwache Adhäsion zwischen den hydrophoben Polymeren und den hydrophilen Zellwandkomponenten gibt. Die hydrophoben Styren-Monomere wurden in die tosylierte Zellwand eingebracht und zu Polystyren polymerisiert. Wie bei der Modifikation mit Flavonoiden konnte eine erhöhte Dimensionsstabilität und reduzierte Wasseraufnahme der Zellwände beobachtet werden. Im dritten Teil der Arbeit wurde das biologisch abbaubare, hydrophobe poly(ɛ-caprolacton) in der Zellwand aufpolymerisiert. Die Ergebnisse deuten darauf hin, dass Polycaprolacton in der Zellwand gebunden ist und zu einer permanenten Quellung führt (bis zu 5 %). Die Dimensionsstabilität nahm um 40 % zu und die Wasseraufnahmerate konnte um mehr als 35 % reduziert werden. Mit dieser Methode kann nicht nur dimensionsstabileres Holz realisiert werden, auch biologische Abbaubarkeit und damit eine einfache Entsorgung sind gewährleistest. KW - Holzmodifikation KW - hydrophobe Moleküle KW - Dimensionsstabilität KW - Wassergehalt KW - wood modification KW - hydrophobic molecules KW - dimensional stability KW - moisture content Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-71325 ER - TY - BOOK A1 - Barthel, Helmut T1 - Wieviel Kalkstein wird zur Herstellung von einem Liter Cola gebraucht? Y1 - 1996 PB - Univ. CY - Potsdam ER - TY - BOOK A1 - Barthel, Helmut T1 - Wieviel Kalkstein wird zur Herstellung von einem Liter cola gebraucht Y1 - 1997 ER - TY - JOUR A1 - Tetenoire, Auguste A1 - Ehlert, Christopher A1 - Juaristi, Joseba Iñaki A1 - Saalfrank, Peter A1 - Alducin, Maite T1 - Why ultrafast photoinduced CO desorption dominates over oxidation on Ru(0001) JF - The journal of physical chemistry letters N2 - CO oxidation on Ru(0001) is a long-standing example of a reaction that, being thermally forbidden in ultrahigh vacuum, can be activated by femtosecond laser pulses. In spite of its relevance, the precise dynamics of the photoinduced oxidation process as well as the reasons behind the dominant role of the competing CO photodesorption remain unclear. Here we use ab initio molecular dynamics with electronic friction that account for the highly excited and nonequilibrated system created by the laser to investigate both reactions. Our simulations successfully reproduce the main experimental findings: the existence of photoinduced oxidation and desorption, the large desorption to oxidation branching ratio, and the changes in the O K-edge X-ray absorption spectra attributed to the initial stage of the oxidation process. Now, we are able to monitor in detail the ultrafast CO desorption and CO oxidation occurring in the highly excited system and to disentangle what causes the unexpected inertness to the otherwise energetically favored oxidation. Y1 - 2022 U6 - https://doi.org/10.1021/acs.jpclett.2c02327 SN - 1948-7185 VL - 13 IS - 36 SP - 8516 EP - 8521 PB - American Chemical Society CY - Washington, DC ER - TY - JOUR A1 - Fudickar, Werner A1 - Linker, Torsten T1 - Why triple bonds protect acenes from oxidation and decomposition JF - Journal of the American Chemical Society N2 - An experimental and computational study on the impact of functional groups on the oxidation stability of higher acenes is presented. We synthesized anthracenes, tetracenes, and pentacenes with various substituents at the periphery, identified their photooxygenation products, and measured the kinetics. Furthermore, the products obtained from thermolysis and the kinetics of the thermolysis are investigated. Density functional theory is applied in order to predict reaction energies, frontier molecular orbital interactions, and radical stabilization energies. The combined results allow us to describe the mechanisms of the oxidations and the subsequent thermolysis. We found that the alkynyl group not only enhances the oxidation stability of acenes but also protects the resulting endoperoxides from thermal decomposition. Additionally, such substituents increase the regioselectivity of the photooxygenation of tetracenes and pentacenes. For the first time, we oxidized alkynylpentacenes by using chemically generated singlet oxygen (O-1(2)) without irradiation and identified a 6,13-endoperoxide as the sole regioisomer. The bimolecular rate constant of this oxidation amounts to only 1 X 10(5) s(-1) M-1. This unexpectedly slow reaction is a result of a physical deactivation of O-1(2). In contrast to unsubstituted or aryl-substituted acenes, photooxygenation of alkynyl-substituted acenes proceeds most likely by a concerted mechanism, while the thermolysis is well explained by the formation of radical intermediates. Our results should be important for the future design of oxidation stable acene-based semiconductors. Y1 - 2012 U6 - https://doi.org/10.1021/ja306056x SN - 0002-7863 VL - 134 IS - 36 SP - 15071 EP - 15082 PB - American Chemical Society CY - Washington ER - TY - GEN A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ N2 - Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 190 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-79953 SP - 4623 EP - 4631 ER - TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ JF - Journal of materials chemistry : C, Materials for optical and electronic devices N2 - Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+. Y1 - 2015 U6 - https://doi.org/10.1039/C4TC02919D SN - 2050-7534 SN - 2050-7526 VL - 18 IS - 3 SP - 4623 EP - 4631 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Behrens, Karsten A1 - Matthes, Philipp R. A1 - Schönfeld, Fabian A1 - Nitsch, Jörn A1 - Steffen, Andreas A1 - Primus, Philipp-Alexander A1 - Kumke, Michael Uwe A1 - Müller-Buschbaum, Klaus A1 - Holdt, Hans-Jürgen T1 - White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+ JF - Journal of materials chemistry : C, Materials for optical and electronic devices Y1 - 2015 U6 - https://doi.org/10.1039/c4tc02919d SN - 2050-7526 SN - 2050-7534 VL - 3 IS - 18 SP - 4623 EP - 4631 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Meiling, Till Thomas A1 - Cywiński, Piotr J. A1 - Bald, Ilko T1 - White carbon: Fluorescent carbon nanoparticles with tunable quantum yield in a reproducible green synthesis N2 - In this study, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain carbon nanodots (CNDs) with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch and Tris-acetate-EDTA (TAE) buffer as carbon sources. Three kinds of CNDs are prepared using different sets of above mentioned starting materials. The as-synthesized CNDs: C-CND (starch only), N-CND 1 (starch in TAE) and N-CND 2 (TAE only) exhibit highly homogenous PL and are ready to use without need for further purification. The CNDs are stable over a long period of time (>1 year) either in solution or as freeze-dried powder. Depending on starting material, CNDs with PL quantum yield (PLQY) ranging from less than 1% up to 28% are obtained. The influence of the precursor concentration, reaction time and type of additives on the optical properties (UV-Vis absorption, PL emission spectrum and PLQY) is carefully investigated, providing insight into the chemical processes that occur during CND formation. Remarkably, upon freeze-drying the initially brown CND-solution turns into a non-fluorescent white/slightly brown powder which recovers PL in aqueous solution and can potentially be applied as fluorescent marker in bio-imaging, as a reduction agent or as a photocatalyst. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 264 KW - Fluorescence spectroscopy KW - Nanoparticles KW - Synthesis and processing Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-97087 ER - TY - JOUR A1 - Meiling, Till T. A1 - Cywinski, Piotr J. A1 - Bald, Ilko T1 - White carbon: Fluorescent carbon nanoparticles with tunable quantum yield in a reproducible green synthesis JF - Scientific reports N2 - In this study, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain carbon nanodots (CNDs) with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch and Tris-acetate-EDTA (TAE) buffer as carbon sources. Three kinds of CNDs are prepared using different sets of above mentioned starting materials. The as-synthesized CNDs: C-CND (starch only), N-CND 1 (starch in TAE) and N-CND 2 (TAE only) exhibit highly homogenous PL and are ready to use without need for further purification. The CNDs are stable over a long period of time (> 1 year) either in solution or as freeze-dried powder. Depending on starting material, CNDs with PL quantum yield (PLQY) ranging from less than 1% up to 28% are obtained. The influence of the precursor concentration, reaction time and type of additives on the optical properties (UV-Vis absorption, PL emission spectrum and PLQY) is carefully investigated, providing insight into the chemical processes that occur during CND formation. Remarkably, upon freeze-drying the initially brown CND-solution turns into a non-fluorescent white/slightly brown powder which recovers PL in aqueous solution and can potentially be applied as fluorescent marker in bio-imaging, as a reduction agent or as a photocatalyst. Y1 - 2016 U6 - https://doi.org/10.1038/srep28557 SN - 2045-2322 VL - 6 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Meiling, Till Thomas A1 - Cywiński, Piotr J. A1 - Bald, Ilko T1 - White carbon: Fluorescent carbon nanoparticles with tunable quantum yield in a reproducible green synthesis JF - Scientific reports N2 - In this study, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain carbon nanodots (CNDs) with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch and Tris-acetate-EDTA (TAE) buffer as carbon sources. Three kinds of CNDs are prepared using different sets of above mentioned starting materials. The as-synthesized CNDs: C-CND (starch only), N-CND 1 (starch in TAE) and N-CND 2 (TAE only) exhibit highly homogenous PL and are ready to use without need for further purification. The CNDs are stable over a long period of time (>1 year) either in solution or as freeze-dried powder. Depending on starting material, CNDs with PL quantum yield (PLQY) ranging from less than 1% up to 28% are obtained. The influence of the precursor concentration, reaction time and type of additives on the optical properties (UV-Vis absorption, PL emission spectrum and PLQY) is carefully investigated, providing insight into the chemical processes that occur during CND formation. Remarkably, upon freeze-drying the initially brown CND-solution turns into a non-fluorescent white/slightly brown powder which recovers PL in aqueous solution and can potentially be applied as fluorescent marker in bio-imaging, as a reduction agent or as a photocatalyst. KW - Fluorescence spectroscopy KW - Nanoparticles KW - Synthesis and processing Y1 - 2016 U6 - https://doi.org/10.1038/srep28557 VL - 6 PB - Nature Publishing Group CY - London ER - TY - JOUR A1 - Khadem, S. M. J. A1 - Hille, Carsten A1 - Löhmannsröben, Hans-Gerd A1 - Sokolov, Igor M. T1 - What information is contained in the fluorescence correlation spectroscopy curves, and where JF - Physical review : E, Statistical, nonlinear and soft matter physics Y1 - 2016 U6 - https://doi.org/10.1103/PhysRevE.94.022407 SN - 2470-0045 SN - 2470-0053 VL - 94 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Hiltl, Stephanie A1 - Böker, Alexander T1 - Wetting Phenomena on (Gradient) Wrinkle Substrates JF - Langmuir N2 - We characterize the wetting behavior of nano structured wrinkle and gradient wrinkle substrates. Different contact angles on both sides of a water droplet after deposition on a gradient sample induce the self-propelled motion of the liquid toward smaller wrinkle dimensions. The droplet motion is self-limited by the contact angles balancing out. Because of the correlation between droplet motion and contact angles, we investigate the wetting behavior of wrinkle substrates with constant dimensions (wavelengths of 400-1200 nm). Contact angles of water droplets on those substrates increase with increasing dimensions of the underlying substrate. The results are independent of the two measurement directions, parallel and perpendicular to the longitudinal axis of the nanostructure. The presented findings may be considered for designing microfluidic or related devices and initiate ideas for the development of further wrinkle applications. Y1 - 2016 U6 - https://doi.org/10.1021/acs.langmuir.6b02364 SN - 0743-7463 VL - 32 SP - 8882 EP - 8888 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Glatzel, Stefan A1 - Laschewsky, André A1 - Lutz, Jean-Francois T1 - Well-Defined uncharged polymers with a sharp UCST in water and in physiological milieu JF - Macromolecules : a publication of the American Chemical Society Y1 - 2011 U6 - https://doi.org/10.1021/ma102677k SN - 0024-9297 VL - 44 IS - 2 SP - 413 EP - 415 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Glatzel, Stefan A1 - Badi, Nezha A1 - Paech, Michael A1 - Laschewsky, André A1 - Lutz, Jean-Francois T1 - Well-defined synthetic polymers with a protein-like gelation behavior in water N2 - Homopolymers of N-acryloyl glycinamide were prepared by reversible addition-fragmentation chain transfer polymerization in water. The formed macromolecules exhibit strong polymer-polymer interactions in aqueous milieu and therefore form thermoreversible physical hydrogels in pure water, physiological buffer or cell medium. Y1 - 2010 UR - http://xlink.rsc.org/jumptojournal.cfm?journal_code=CC U6 - https://doi.org/10.1039/C0cc00038h SN - 1359-7345 ER - TY - THES A1 - Toca-Herrara, José Luis = Herrera T1 - Wechselwirkungskräfte und Struktur in Phospholipid-Schaumfilmen Y1 - 1999 CY - Potsdam ER - TY - JOUR A1 - Schuster, Ch. A1 - Koetz, Joachim A1 - Jaeger, Werner A1 - Kulicke, Werner-Michael T1 - Wechselwirkungen zwischen Klärschlammpartikeln und Polyelektrolyten Y1 - 1996 ER - TY - JOUR A1 - Bechmann, Wolfgang A1 - Bald, Ilko T1 - Wechselwirkung zwischen elektromagnetischer Strahlung und Stoff – Grundlagen der Spektroskopie N2 - Unter elektromagnetischer Strahlung versteht man eine Welle aus gekoppelten elektrischen und magnetischen Feldern. Stoffe, die dieser Welle ausgesetzt sind, können von ihr Energie aufnehmen. Dabei wechseln die Stoffe zwischen ihrem, der jeweiligen Temperatur entsprechenden energetischen Grundzustand G und einem energetisch angeregten Zustand A* (Abbildung 4.1). Y1 - 2020 SN - 978-3-662-62033-5 SN - 978-3-662-62034-2 U6 - https://doi.org/10.1007/978-3-662-62034-2_4 SP - 303 EP - 457 PB - Springer CY - Berlin ET - 7. Auflage ER - TY - THES A1 - Delajon, Christophe Bernard T1 - Wechselwirkung von Lipidmembranen mit Polyelektrolytmultischichten Y1 - 2005 CY - Potsdam ER - TY - JOUR A1 - Rading, M. Michael A1 - Sandmann, Michael A1 - Steup, Martin A1 - Chiarugi, Davide A1 - Valleriani, Angelo T1 - Weak correlation of starch and volume in synchronized photosynthetic cells JF - Physical review : E, Statistical, nonlinear and soft matter physics N2 - In cultures of unicellular algae, features of single cells, such as cellular volume and starch content, are thought to be the result of carefully balanced growth and division processes. Single-cell analyses of synchronized photoautotrophic cultures of the unicellular alga Chlamydomonas reinhardtii reveal, however, that the cellular volume and starch content are only weakly correlated. Likewise, other cell parameters, e.g., the chlorophyll content per cell, are only weakly correlated with cell size. We derive the cell size distributions at the beginning of each synchronization cycle considering growth, timing of cell division and daughter cell release, and the uneven division of cell volume. Furthermore, we investigate the link between cell volume growth and starch accumulation. This work presents evidence that, under the experimental conditions of light-dark synchronized cultures, the weak correlation between both cell features is a result of a cumulative process rather than due to asymmetric partition of biomolecules during cell division. This cumulative process necessarily limits cellular similarities within a synchronized cell population. Y1 - 2015 U6 - https://doi.org/10.1103/PhysRevE.91.012711 SN - 1539-3755 SN - 1550-2376 VL - 91 IS - 1 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Schmidt, Burkhard A1 - Lorenz, Ulf T1 - WavePacket BT - a Matlab package for numerical quantum dynamics. I: Closed quantum systems and discrete variable representations JF - Computer physics communications : an international journal devoted to computational physics and computer programs in physics N2 - WavePacket is an open-source program package for the numerical simulation of quantum-mechanical dynamics. It can be used to solve time-independent or time-dependent linear Schrödinger and Liouville–von Neumann-equations in one or more dimensions. Also coupled equations can be treated, which allows to simulate molecular quantum dynamics beyond the Born–Oppenheimer approximation. Optionally accounting for the interaction with external electric fields within the semiclassical dipole approximation, WavePacket can be used to simulate experiments involving tailored light pulses in photo-induced physics or chemistry. The graphical capabilities allow visualization of quantum dynamics ‘on the fly’, including Wigner phase space representations. Being easy to use and highly versatile, WavePacket is well suited for the teaching of quantum mechanics as well as for research projects in atomic, molecular and optical physics or in physical or theoretical chemistry. The present Part I deals with the description of closed quantum systems in terms of Schrödinger equations. The emphasis is on discrete variable representations for spatial discretization as well as various techniques for temporal discretization. The upcoming Part II will focus on open quantum systems and dimension reduction; it also describes the codes for optimal control of quantum dynamics. The present work introduces the MATLAB version of WavePacket 5.2.1 which is hosted at the Sourceforge platform, where extensive Wiki-documentation as well as worked-out demonstration examples can be found. KW - Schrodinger equation KW - Quantum dynamics KW - Numerical propagation KW - Bound states KW - Discrete variable representation KW - Non-adiabatic transitions Y1 - 0207 U6 - https://doi.org/10.1016/j.cpc.2016.12.007 SN - 0010-4655 SN - 1879-2944 VL - 213 SP - 223 EP - 234 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Weiss, Jan A1 - Li, Ang A1 - Wischerhoff, Erik A1 - Laschewsky, André T1 - Water-soluble random and alternating copolymers of styrene monomers with adjustable lower critical solution temperature JF - Polymer Chemistry N2 - Random copolymers of 4-vinylbenzyl tri(oxyethylene) and tetra(oxyethylene) ethers, as well as alternating copolymers of 4-vinylbenzyl methoxytetra(oxyethylene) ether and a series of N-substituted maleimides, were synthesised by conventional free radical polymerisation, reversible addition fragmentation chain transfer (RAFT) and atom transfer radical polymerisation (ATRP). Their thermosensitive behaviour in aqueous solution was studied by turbidimetry and dynamic light scattering. Depending on the copolymer composition, a LCST type phase transition was observed in water. The transition temperature of the obtained random as well as alternating copolymers could be varied within a broad temperature window. In the case of the random copolymers, transition temperatures could be easily fine-tuned, as they showed a linear dependence on the copolymer composition, and were additionally modified by the nature of the polymer end-groups. Alternating copolymers were extremely versatile for implementing a broad range of variations of the phase transition temperatures. Further, while alternating copolymers derived from 4-vinylbenzyl methoxytetra(oxyethylene) ether and maleimides with small hydrophobic side chains underwent macroscopic phase separation when dissolved in water and heated above their cloud point, the incorporation of maleimides bearing larger hydrophobic substituents resulted in the formation of mesoglobules above the phase transition temperature, with hydrodynamic diameters of less than 100 nm. Y1 - 2012 U6 - https://doi.org/10.1039/c1py00422k SN - 1759-9954 VL - 3 IS - 2 SP - 352 EP - 361 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 354 KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400453 ER - TY - THES A1 - Fortes Martín, Rebeca T1 - Water-in-oil microemulsions as soft-templates to mediate nanoparticle interfacial assembly into hybrid nanostructures T1 - Wasser-in-Öl Mikroemulsionen als Soft-Templat für die Grenzfläche-Anordnung von Nanopartikeln in hybride Nanostrukturen T1 - Microemulsiones de aceite-en-agua como estructuras templadas blandas para el ensamblaje de nanoparticulas en su interfase dando nanoestructuras híbridas N2 - Hybrid nanomaterials offer the combination of individual properties of different types of nanoparticles. Some strategies for the development of new nanostructures in larger scale rely on the self-assembly of nanoparticles as a bottom-up approach. The use of templates provides ordered assemblies in defined patterns. In a typical soft-template, nanoparticles and other surface-active agents are incorporated into non-miscible liquids. The resulting self-organized dispersions will mediate nanoparticle interactions to control the subsequent self-assembly. Especially interactions between nanoparticles of very different dispersibility and functionality can be directed at a liquid-liquid interface. In this project, water-in-oil microemulsions were formulated from quasi-ternary mixtures with Aerosol-OT as surfactant. Oleyl-capped superparamagnetic iron oxide and/or silver nanoparticles were incorporated in the continuous organic phase, while polyethyleneimine-stabilized gold nanoparticles were confined in the dispersed water droplets. Each type of nanoparticle can modulate the surfactant film and the inter-droplet interactions in diverse ways, and their combination causes synergistic effects. Interfacial assemblies of nanoparticles resulted after phase-separation. On one hand, from a biphasic Winsor type II system at low surfactant concentration, drop-casting of the upper phase afforded thin films of ordered nanoparticles in filament-like networks. Detailed characterization proved that this templated assembly over a surface is based on the controlled clustering of nanoparticles and the elongation of the microemulsion droplets. This process offers versatility to use different nanoparticle compositions by keeping the surface functionalization, in different solvents and over different surfaces. On the other hand, a magnetic heterocoagulate was formed at higher surfactant concentration, whose phase-transfer from oleic acid to water was possible with another auxiliary surfactant in ethanol-water mixture. When the original components were initially mixed under heating, defined oil-in-water, magnetic-responsive nanostructures were obtained, consisting on water-dispersible nanoparticle domains embedded by a matrix-shell of oil-dispersible nanoparticles. Herein, two different approaches were demonstrated to form diverse hybrid nanostructures from reverse microemulsions as self-organized dispersions of the same components. This shows that microemulsions are versatile soft-templates not only for the synthesis of nanoparticles, but also for their self-assembly, which suggest new approaches towards the production of new sophisticated nanomaterials in larger scale. N2 - Hybride Nanomaterialen ermöglichen die Kombination von individuellen Eigenschaften jeder Art von Nanopartikeln. Einige Strategien für die Herstellung neuer großskaliger Nanostrukturen beruhen auf der Selbstassemblierung von Nanopartikeln über einen Bottom-up-Ansatz. Die Nutzung von Templatstrukturen ermöglicht Anordnungen in definierten Mustern. In einem typischen Soft-Templat werden Nanopartikel und andere oberflächenaktive Wirkstoffe in nicht-mischbare Flüssigkeiten eingebracht. Die resultierenden selbst-organisierten Dispersionen beeinflussen die Nanopartikel Interaktionen und kontrollieren die nachfolgende Selbstassemblierung. Insbesondere Interaktionen zwischen Nanopartikeln mit sehr unterschiedlicher Dispergierbarkeit und Funktionalität können Interaktionen an einer Flüssig-Flüssig Grenzfläche gerichtet werden. In diesem Forschungsprojekt wurden Wasser-in-Öl Mikroemulsionen aus quasi-ternären Mischungen mit Aerosol-OT als Tensid hergestellt. Oleyl-beschichtete superparamagnetische Eisenoxid und/oder Silber Nanopartikel wurden in der kontinuierlichen Ölphase eingebracht, während die Polyethyleneimin-stabilisierten Gold Nanopartikel in feinverteilte Wassertröpfchen inkorporiert wurden. Jede Sorte von Nanopartikeln kann den Tensidfilm und die Tröpfchen-Interaktionen auf verschiedene Weise beeinflussen, und seine Kombination führt dabei zu synergetischen Effekten. Die Anordnung von Nanopartikeln an der Grenzfläche basiert auf der Phasentrennung. Auf der einen Seite, bildeten sich aus einem zweiphasigen Winsor II System mit niedrigen Tensid Konzentrationen durch Evaporation der oberen Phase dünne Schichten aus geordneten Nanopartikeln in Form von Filament-Netzen aus. Eine detaillierte Charakterisierung zeigte, dass die Filament-artige Strukturierung auf ein kontrolliertes Nanopartikeln-Clustering und auf die Ausdehnung der Mikroemulsions-Tröpfchen zurückzuführen ist. Dieser Prozess eröffnet flexible Einsatzmöglichkeiten für unterschiedliche Nanopartikel Kompositionen, indem die Oberflächenfunktionalisierung in unterschiedlichen Lösungsmitteln erhalten bleibt, und auch für verschiedenen Lösungsmitteln und über verschiedene Flächen. Auf der anderen Seite wurde ein magnetisches Heterokoagulat in höheren Tensid Konzentration hergestellt, dessen Phasentransfer von Ölsäure in Wasser mit einem anderen zusätzlichen Tensid in einer Ethanol-Wasser Mischung ermöglicht wurde. In Abhängigkeit von der Ausgangstemperatur der initialen Komponenten konnten definierte magnetisch-stimulierbare Öl-in-Wasser Nanostrukturen erhaltet werden. Dabei gelang es Wasser-dispergierbare Nanopartikelkompartimente in eine Matrix-Hülle aus Öl-dispergierbaren Nanopartikeln einzubetten. In dieser Arbeit wurden zwei verschiedene Wege aufgezeigt, um hybride Nanostrukturen aus inversen Mikroemulsionen selbst-organisiert herzustellen. Dies belegt, dass Mikroemulsions-Template nicht nur für die Nanopartikel Synthese geeignet sind, sondern auch für die Herstellung filamentartiger, selbstorganisierter Systeme. Es eröffnen sich hiermit neue Zugänge für die selbstorganisierte Strukturierung von Nanopartikeln auf der Mikrometerskala. N2 - Los nanomateriales híbridos ofrecen la combinación de propiedades individuales de diferentes tipos de nanopartículas. Algunas estrategias para el desarrollo de nuevas nanoestructuras en mayor escala se basan en el auto-ensamblaje (self-assembly) de nanopartículas, como una estrategia “de abajo hacia arriba” (bottom-up). El uso de estructuras de plantilla (templates) proporciona ensamblajes ordenados de formas definidas. En una plantilla blanda típica, las nanopartículas y otros agentes de actividad superficial se incorporan en líquidos no miscibles. Esto da lugar a dispersiones auto-organizadas que mediarán las interacciones entre las nanopartículas, para controlar su auto-ensamblaje resultante. Especialmente las interacciones entre nanopartículas de dispersibilidad y funcionalidades muy diferentes pueden ser redirigidas a una interfase líquido-líquido. En este proyecto se formularon microemulsiones de agua-en-aceite a partir de mezclas cuasi-ternarias con Aerosol-OT (docusato de sodio) como tensioactivo. Las nanopartículas cubiertas de ligandos oleicos, de óxido de hierro superparamagnéticas o de plata, se incorporaron en la fase orgánica continua, mientras que las nanopartículas de oro estabilizadas por polietilenimina fueron confinadas en las gotículas de agua dispersas. Cada tipo de nanopartícula puede modular de fomas muy diversas la capa de tensioactivo y las interacciones entre gotículas, y además su combinación resulta en efectos sinérgicos. Los ensamblajes interfase de nanopartículas se obtuvieron bajo procesos de separación entre fases. Por un lado, a partir de un sistema bifásico de Winsor del tipo II con baja concentración del tensioactivo, la deposición y evaporación de una gota sobre una superficie (drop-casting) de la fase superior proporcionó películas finas de nanopartículas ordenadas como redes de filamentos. Su caracterización detallada probó que este ensamblaje por plantilla sobre una superficie se basa en un agrupamiento (clustering) controlado entre nanopartículas y en la elongación de las gotículas de microemulsiones. Este proceso ofrece versatilidad para usar diferentes composiciones de nanopartículas siempre que su funcionalidad en su superficie se mantenga, además de poder usar diferentes disolventes y sobre diferentes superficies. Por otro lado, un heterocoagulado magnético se formó sobre concentraciones más altas del tensioactivo, y su transferencia de fase desde ácido oleico a agua fue posible usando otro tensioactivo auxiliar en una mezcla de agua y etanol. Cuando los componentes iniciales fueron mezclados al principio bajo calentamiento, se obtuvieron nanoestucturas definidas de aceite-en-agua que responden a un imán, las cuales consisten de dominios de nanopartículas dispersibles en agua que se rodean por un embalaje (matrix-shell) de nanopartículas dispersibles en fase oleosa. De este modo, se demostraron dos propuestas para formar diversos tipos de nanoestructuras híbridas a partir de microemulsiones inversas como dispersiones auto-organizadas de unos mismos componentes. Esto demuestra que las microemulsiones constituyen estructuras de plantilla blandas no sólo para la síntesis de nanopartículas, sino también para su auto-ensamblaje, lo que sugiere novedosas estrategias para la producción de nuevos nanomateriales sofisticados en mayor escala. KW - microemulsions KW - nanoparticles KW - surfactants KW - Colloid Chemistry KW - soft-templates KW - nanostructures KW - nanoparticle assembly KW - hybrid nanostructures KW - Kolloidchemie KW - hybride Nanostrukturen KW - Mikroemulsionen KW - Nanopartikeln-Anordnung KW - Nanopartikeln KW - Nanostrukturen KW - Soft-Templaten KW - Tenside KW - Química de Coloides KW - nanoestructuras híbridas KW - microemulsiones KW - ensamblaje de nanopartículas KW - nanopartículas KW - nanoestructuras KW - estructuras templadas blandas KW - tensioactivos Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-571801 ER - TY - JOUR A1 - Penschke, Christopher A1 - Edler von Zander, Robert A1 - Beqiraj, Alkit A1 - Zehle, Anna A1 - Jahn, Nicolas A1 - Neumann, Rainer A1 - Saalfrank, Peter T1 - Water on porous, nitrogen-containing layered carbon materials BT - the performance of computational model chemistries JF - Physical chemistry, chemical physics : PCCP ; a journal of European chemical societies / RSC, Royal Society of Chemistry N2 - Porous, layered materials containing sp(2)-hybridized carbon and nitrogen atoms, offer through their tunable properties, a versatile route towards tailormade catalysts for electrochemistry and photochemistry. A key molecule interacting with these quasi two-dimensional materials (2DM) is water, and a photo(electro)chemical key reaction catalyzed by them, is water splitting into H-2 and O-2, with the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) as half reactions. The complexity of some C/N-based 2DM in contact with water raises special needs for their theoretical modelling, which in turn is needed for rational design of C/N-based catalysts. In this work, three classes of C/N-containing porous 2DM with varying pore sizes and C/N ratios, namely graphitic carbon nitride (g-C3N4), C2N, and poly(heptazine imides) (PHI), are studied with various computational methods. We elucidate the performance of different models and model chemistries (the combination of electronic structure method and basis set) for water and water fragment adsorption in the low-coverage regime. Further, properties related to the photo(electro)chemical activity like electrochemical overpotentials, band gaps, and optical excitation energies are in our focus. Specifically, periodic models will be tested vs. cluster models, and density functional theory (DFT) vs. wavefunction theory (WFT). This work serves as a basis for a systematic study of trends for the photo(electro)chemical activity of C/N-containing layered materials as a function of water content, pore size and density. Y1 - 2022 U6 - https://doi.org/10.1039/d2cp00657j SN - 1463-9076 SN - 1463-9084 VL - 24 IS - 24 SP - 14709 EP - 14726 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Heiden, Sophia A1 - Wirth, Jonas A1 - Campen, Richard Kramer A1 - Saalfrank, Peter T1 - Water molecular beam scattering at alpha-Al2O3(0001) BT - an ab initio molecular dynamics study JF - The journal of physical chemistry : C, Nanomaterials and interfaces N2 - Recent molecular beam experiments have shown that water may adsorb molecularly or dissociatively on an α-Al2O3(0001) surface, with enhanced dissociation probability compared to “pinhole dosing”, i.e., adsorption under thermal equilibrium conditions. However, precise information on the ongoing reactions and their relative probabilities is missing. In order to shed light on molecular beam scattering for this system, we perform ab initio molecular dynamics calculations to simulate water colliding with α-Al2O3(0001). We find that single water molecules hitting a cold, clean surface from the gas phase are either reflected, molecularly adsorbed, or dissociated (so-called 1–2 dissociation only). A certain minimum translational energy (above 0.1 eV) seems to be required to enforce dissociation, which may explain the higher dissociation probability in molecular beam experiments. When the surface is heated and/or when refined surface and beam models are applied (preadsorption with water or water fragments, clustering and internal preexcitation in the beam), additional channels open, among them physisorption, water clustering on the surface, and so-called 1–4 and 1–4′ dissociation. Y1 - 2018 U6 - https://doi.org/10.1021/acs.jpcc.8b04179 SN - 1932-7447 VL - 122 IS - 27 SP - 15494 EP - 15504 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Heiden, Sophia A1 - Yue, Yanhua A1 - Kirsch, Harald A1 - Wirth, Jonas A. A1 - Saalfrank, Peter A1 - Campen, Richard Kramer T1 - Water dissociative adsorption on α-Al2O3(112̅0) is controlled by surface site undercoordination, density, and topology JF - The journal of physical chemistry / publ. weekly by the American Chemical Society : C, Nanomaterials and interfaces N2 - α-Al2O3 surfaces are common in a wide variety of applications and useful models of more complicated, environmentally abundant, alumino-silicate surfaces. While decades of work have clarified that all properties of these surfaces depend sensitively on the crystal face and the presence of even small amounts of water, quantitative insight into this dependence has proven challenging. Overcoming this challenge requires systematic study of the mechanism by which water interacts with various α-Al2O3 surfaces. Such insight is most easily gained for the interaction of small amounts of water with surfaces in ultra high vacuum. In this study, we continue our combined theoretical and experimental approach to this problem, previously applied to water interaction with the α-Al2O3 (0001) and (11̅02) surfaces, now to water interaction with the third most stable surface, that is, the (112̅0). Because we characterize all three surfaces using similar tools, it is straightforward to conclude that the (112̅0) is most reactive with water. The most important factor explaining its increased reactivity is that the high density of undercoordinated surface Al atoms on the (112̅0) surface allows the bidentate adsorption of OH fragments originating from dissociatively adsorbed water, while only monodentate adsorption is possible on the (0001) and (11̅02) surfaces: the reactivity of α-Al2O3 surfaces with water depends strongly, and nonlinearly, on the density of undercoordinated surface Al atoms. Y1 - 2018 U6 - https://doi.org/10.1021/acs.jpcc.7b10410 SN - 1932-7447 VL - 122 IS - 12 SP - 6573 EP - 6584 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Heiden, Sophia L. T1 - Water at α-alumina surfaces T1 - Wasser auf alpha-Aluminiumoxid-Oberflächen BT - energetics, dynamics and kinetics BT - Energetik, Dynamik und Kinetik N2 - The (0001) surface of α-Al₂O₃ is the most stable surface cut under UHV conditions and was studied by many groups both theoretically and experimentally. Reaction barriers computed with GGA functionals are known to be underestimated. Based on an example reaction at the (0001) surface, this work seeks to improve this rate by applying a hybrid functional method and perturbation theory (LMP2) with an atomic orbital basis, rather than a plane wave basis. In addition to activation barriers, we calculate the stability and vibrational frequencies of water on the surface. Adsorption energies were compared to PW calculations and confirmed PBE+D2/PW stability results. Especially the vibrational frequencies with the B3LYP hybrid functional that have been calculated for the (0001) surface are in good agreement with experimental findings. Concerning the barriers and the reaction rate constant, the expectations are fully met. It could be shown that recalculation of the transition state leads to an increased barrier, and a decreased rate constant when hybrid functionals or LMP2 are applied. Furthermore, the molecular beam scattering of water on (0001) surface was studied. In a previous work by Hass the dissociation was studied by AIMD of molecularly adsorbed water, referring to an equilibrium situation. The experimental method to obtaining this is pinhole dosing. In contrast to this earlier work, the dissociation process of heavy water that is brought onto the surface from a molecular beam source was modeled in this work by periodic ab initio molecular dynamics simulations. This experimental method results in a non-equilibrium situation. The calculations with different surface and beam models allow us to understand the results of the non-equilibrium situation better. In contrast to a more equilibrium situation with pinhole dosing, this gives an increase in the dissociation probability, which could be explained and also understood mechanistically by those calculations. In this work good progress was made in understanding the (1120) surface of α-Al₂O₃ in contact with water in the low-coverage regime. This surface cut is the third most stable one under UHV conditions and has not been studied to a great extent yet. After optimization of the clean, defect free surface, the stability of different adsorbed species could be classified. One molecular minimum and several dissociated species could be detected. Starting from these, reaction rates for various surface reactions were evaluated. A dissociation reaction was shown to be very fast because the molecular minimum is relatively unstable, whereas diffusion reactions cover a wider range from fast to slow. In general, the (112‾0) surface appears to be much more reactive against water than the (0001) surface. In addition to reactivity, harmonic vibrational frequencies were determined for comparison with the findings of the experimental “Interfacial Molecular Spectroscopy” group from Fritz-Haber institute in Berlin. Especially the vibrational frequencies of OD species could be assigned to vibrations from experimental SFG spectra with very good agreement. Also, lattice vibrations were studied in close collaboration with the experimental partners. They perform SFG spectra at very low frequencies to get deep into the lattice vibration region. Correspondingly, a bigger slab model with greater expansion perpendicular to the surface was applied, considering more layers in the bulk. Also with the lattice vibrations we could obtain reasonably good agreement in terms of energy differences between the peaks. N2 - Das wissenschaftliche Interesse an der Untersuchung von Oberflächen hat in den letzten Jahren stark zugenommen. Oberflächen spielen unter anderem in Katalyse, Nanotechnologie und Korrosionsforschung eine wichtige Rolle. Es wurden nicht nur Fortschritte im experimentellen Bereich, sondern auch in der theoretischen, computergestützten Analyse dieser Systeme erzielt. Durch leistungsstärkere Computer und ausgefeiltere Software mit immer besseren Methoden können heutzutage wesentlich größere, komplexere Systeme mit höherer Genauigkeit untersucht werden, als noch vor zehn Jahren. In dieser Arbeit wurden derartige Rechnungen angewandt, um Prozesse der α-Aluminiumoxid-Oberfläche besser zu verstehen. Es wurde in drei Teilprojekten wissenschaftlichen Fragestellungen zu Aufbau, Stabilität, Wasseradsorption, Reaktivität und Schwingungseigenschaften nachgegangen, letztere auch im Vergleich zu experimentellen Befunden. Im ersten Teilprojekt wurde auf ein bekanntes Problem der genutzten Methodik eingegangen. Wie aus der Literatur bekannt ist, werden bei dem Dichtefunktional PBE, das in dieser Arbeit hauptsächlich verwendet wurde, die Reaktionsbarrieren unterschätzt, und somit Raten überschätzt. Mit Hilfe zweier unterschiedlicher Methoden konnte dieses Problem deutlich verbessert werden, sodass die Barrieren erhöht und die Raten verringert wurden, was mehr dem Bild der Realität entspricht. Diese Methoden sind zum einen die sogenannten Hybridfunktionale und zum anderen lokale Møller-Plesset Störungstheorie. Außerdem wurden Adsorptionsenergien und Vibrationen berechnet und mit vorherigen Rechnungen, sowie experimentellen Daten verglichen. In einem zweiten Teilprojekt wurde die Streuung von Wasser an der Oberfläche untersucht. In einem Molekularstrahlexperiment konnte kürzlich nachgewiesen werden, dass sich die Dissoziationswahrscheinlichkeit im Vergleich zur Pinhole-Dosierung erhöht (beides sind Methoden um Wasser auf die Oberfläche aufzubringen). In dieser Arbeit konnte dies durch Simulationen nachgewiesen und mechanistisch aufgeklärt werden. Ein weiteres Teilprojekt befasste sich mit der (112‾0)-Oberfläche, zu der es bislang wenige Untersuchungen gibt. Hier wurde zunächst die Oberfläche ohne Wasser untersucht, um die Beschaffenheit zu erkunden. Anschließend wurde das Verhalten eines Wassermoleküls auf der Oberfläche untersucht. Es kann sowohl molekular adsorbieren, als auch in seine Bestandteile OH und H dissoziiert vorliegen, wobei die dissoziierten Strukturen wesentlich stabiler sind. Die Reaktionsraten für Dissoziation und Diffusion wurden untersucht. Erstere sind sehr schnell (Größenordnung 10¹² pro Sekunde) und letztere können einen weiten Bereich abdecken (10⁻¹³-10⁶s⁻¹). Im Vergleich mit oberflächenspezifischen Schwingungsspektroskopie-Experimenten konnte gute Übereinstimmung gefunden werden. So waren wir in der Lage, die jeweiligen OD Gruppen jeder Schwingung den experimentellen Daten zuzuweisen, wobei D hier Deuterium, also schwerer Wasserstoff ist. KW - surface science KW - alumina KW - water at alumina KW - theoretical chemistry KW - theoretische Chemie KW - Aluminiumoberfläche KW - Wasser auf Aluminiumoxid KW - Oberflächenchemie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426366 ER - TY - JOUR A1 - von Reppert, Alexander A1 - Sarhan, Radwan Mohamed A1 - Stete, Felix A1 - Pudell, Jan-Etienne A1 - Del Fatti, N. A1 - Crut, A. A1 - Koetz, Joachim A1 - Liebig, Ferenc A1 - Prietzel, Claudia Christina A1 - Bargheer, Matias T1 - Watching the Vibration and Cooling of Ultrathin Gold Nanotriangles by Ultrafast X-ray Diffraction JF - The journal of physical chemistry : C, Nanomaterials and interfaces N2 - We study the vibrations of ultrathin gold nanotriangles upon optical excitation of the electron gas by ultrafast X-ray diffraction. We quantitatively measure the strain evolution in these highly asymmetric nano-objects, providing a direct estimation of the amplitude and phase of the excited vibrational motion. The maximal strain value is well reproduced by calculations addressing pump absorption by the nanotriangles and their resulting thermal expansion. The amplitude and phase of the out-of-plane vibration mode with 3.6 ps period dominating the observed oscillations are related to two distinct excitation mechanisms. Electronic and phonon pressures impose stresses with different time dependences. The nanosecond relaxation of the expansion yields a direct temperature sensing of the nano-object. The presence of a thin organic molecular layer at the nanotriangle/substrate interfaces drastically reduces the thermal conductance to the substrate. Y1 - 2016 U6 - https://doi.org/10.1021/acs.jpcc.6b11651 SN - 1932-7447 VL - 120 SP - 28894 EP - 28899 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Lachmann, Joachim A1 - Börger, Ilka A1 - Birkhahn, Gisela T1 - Wandlung halogenierter Kohlenwasserstoffe im wasserstoffhaltigen thermischen Plasma Y1 - 1996 ER - TY - THES A1 - Goedel, Werner Andreas T1 - Von Monoschichten verankerter Polymere zu freitragenden, gummielastischen Membranen Y1 - 1998 CY - Potsdam ER - TY - THES A1 - Bomm, Jana T1 - Von Gold Plasmonen und Exzitonen : Synthese, Charakterisierung und Applikationen von Gold Nanopartikeln T1 - Of gold plasmons and excitons : synthesis, characterization and applications of gold nanoparticles N2 - In dieser Arbeit wurden sphärische Gold Nanopartikel (NP) mit einem Durchmesser größer ~ 2 nm, Gold Quantenpunkte (QDs) mit einem Durchmesser kleiner ~ 2 nm sowie Gold Nanostäbchen (NRs) unterschiedlicher Länge hergestellt und optisch charakterisiert. Zudem wurden zwei neue Synthesevarianten für die Herstellung thermosensitiver Gold QDs entwickelt werden. Sphärische Gold NP zeigen eine Plasmonenbande bei ~ 520 nm, die auf die kollektive Oszillation von Elektronen zurückzuführen ist. Gold NRs weisen aufgrund ihrer anisotropen Form zwei Plasmonenbanden auf, eine transversale Plasmonenbande bei ~ 520 nm und eine longitudinale Plasmonenbande, die vom Länge-zu-Durchmesser-Verhältnis der Gold NRs abhängig ist. Gold QDs besitzen keine Plasmonenbande, da ihre Elektronen Quantenbeschränkungen unterliegen. Gold QDs zeigen jedoch aufgrund diskreter Energieniveaus und einer Bandlücke Photolumineszenz (PL). Die synthetisierten Gold QDs besitzen eine Breitbandlumineszenz im Bereich von ~ 500-800 nm, wobei die Lumineszenz-eigenschaften (Emissionspeak, Quantenausbeute, Lebenszeiten) stark von den Herstellungs-bedingungen und den Oberflächenliganden abhängen. Die PL in Gold QDs ist ein sehr komplexes Phänomen und rührt vermutlich von Singulett- und Triplett-Zuständen her. Gold NRs und Gold QDs konnten in verschiedene Polymere wie bspw. Cellulosetriacetat eingearbeitet werden. Polymernanokomposite mit Gold NRs wurden erstmals unter definierten Bedingungen mechanisch gezogen, um Filme mit optisch anisotropen (richtungsabhängigen) Eigenschaften zu erhalten. Zudem wurde das Temperaturverhalten von Gold NRs und Gold QDs untersucht. Es konnte gezeigt werden, dass eine lokale Variation der Größe und Form von Gold NRs in Polymernanokompositen durch Temperaturerhöhung auf 225-250 °C erzielt werden kann. Es zeigte sich, dass die PL der Gold QDs stark temperaturabhängig ist, wodurch die PL QY der Proben beim Abkühlen (-7 °C) auf knapp 30 % verdoppelt und beim Erhitzen auf 70 °C nahezu vollständig gelöscht werden konnte. Es konnte demonstriert werden, dass die Länge der Alkylkette des Oberflächenliganden einen Einfluss auf die Temperaturstabilität der Gold QDs hat. Zudem wurden verschiedene neuartige und optisch anisotrope Sicherheitslabels mit Gold NRs sowie thermosensitive Sicherheitslabel mit Gold QDs entwickelt. Ebenso scheinen Gold NRs und QDs für die und die Optoelektronik (bspw. Datenspeicherung) und die Medizin (bspw. Krebsdiagnostik bzw. -therapie) von großem Interesse zu sein. N2 - In this thesis, the synthesis and optical characterization of spherical gold nanoparticles (NP) with diameters larger than ~ 2 nm, gold quantum dots (QDs) with diameters smaller than ~ 2 nm and gold nanorods (NRs) with different lengths are presented. In addition, a novel one-pot synthesis for the preparation of thermosensitive gold QDs is introduced. Gold NP solutions appear red colored due to their strong absorption in the visible range at ~ 520 nm. This absorption band is a result of surface plasmon resonance, which is caused by the coherent oscillation of conduction band electrons induced by an electromagnetic field. In contrast to spherical gold NPs, gold NRs show two surface plasmon bands due to their anisotropic shape, a transverse plasmon band at ~ 520 nm and a longitudinal plasmon band depending on the aspect ratio (length-to-width-ratio) of the gold NRs. If the size of the gold NPs decreases to values below ~ 2 nm, quantum-size confinement occurs and the surface plasmon band disappears. Additionally, the overlap between conduction band and valence band disappears, discrete electronic levels arise and a band gap is created. As a consequence of quantum confinement, the gold QDs show photoluminescence (PL) upon UV-irradiation. The gold QDs synthesized via the one-pot synthesis exhibit a broadband luminescence between 500 nm and 800 nm. The luminescence properties (emission peak, quantum yield, lifetime) strongly depend on the synthetic parameters like reaction temperature, stoichiometry and the surface ligand. Gold NRs and gold QDs were incoroporated into different polymers (e.g. cellulose triacetate). Polymer nanocomposite films showing optical anisotropy are obtainded by stretching polymer films containing gold NRs uniaxial in a tensile test machine. In addition to the optical characterization of gold NRs and QDs, their thermal behavior in solution as well as in different nanocomposites is studied. A shortening of the gold NRs or a transformation into spherical gold NP is observed, if the polymer nanocomposites containing gold NRs are heated above a temperature of 200 °C. The PL of the synthesized gold QDs strongly depends on the ambient temperature. An increase of PL quantum yield (QY) and PL lifetime occur, if the solutions are cooled. The best PL QY of 16.6 % was observed for octadecyl mercaptan capped gold QDs at room temperature, which could be improved to 28.6 % when cooling the solutions to -7 °C. Furthermore, optically anisotropic security labels containing gold NRs and thermosensitive security devices containing gold QDs are developed. Due to their unique optical properties, gold NRs and QDs are interesting candidates for optoelectronical as well as data storage devices and medical applications like biomedical imaging or cancer therapy. KW - Gold KW - Nanopartikel KW - Quantenpunkte KW - Nanostäbchen KW - Oberflächenplasmonenlasmonen KW - gold KW - nanoparticles KW - quantum dots KW - nanorods KW - surface plasmons Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66402 ER - TY - THES A1 - Halbrügge, Lena T1 - Von der Curricularen Innovation zur Wissenschaftskommunikation T1 - From curriculum innovation to science communication BT - Explorative Entwicklung und Evaluation einer Wissenschaftskommunikationsstrategie für naturwissenschaftliche Forschungsverbünde BT - exploratory development and evaluation of a strategy for science communication in scientific research associations N2 - Im Rahmen einer explorativen Entwicklung wurde in der vorliegenden Studie ein Konzept zur Wissenschaftskommunikation für ein Graduiertenkolleg, in dem an photochemischen Prozessen geforscht wird, erstellt und anschließend evaluiert. Der Grund dafür ist die immer stärker wachsende Forderung nach Wissenschaftskommunikation seitens der Politik. Es wird darüber hinaus gefordert, dass die Kommunikation der eigenen Forschung in Zukunft integrativer Bestandteil des wissenschaftlichen Arbeitens wird. Um junge Wissenschaftler bereits frühzeitig auf diese Aufgabe vorzubereiten, wird Wissenschaftskommunikation auch in Forschungsverbünden realisiert. Aus diesem Grund wurde in einer Vorstudie untersucht, welche Anforderungen an ein Konzept zur Wissenschaftskommunikation im Rahmen eines Forschungsverbundes gestellt werden, indem die Einstellung der Doktoranden zur Wissenschaftskommunikation sowie ihre Kommunikationsfähigkeiten anhand eines geschlossenen Fragebogens evaluiert wurden. Darüber hinaus wurden aus den Daten Wissenschaftskommunikationstypen abgeleitet. Auf Grundlage der Ergebnisse wurden unterschiedliche Wissenschaftskommunikationsmaßnahmen entwickelt, die sich in der Konzeption, den Rezipienten, sowie der Form der Kommunikation und den Inhalten unterscheiden. Im Rahmen dieser Entwicklung wurde eine Lerneinheit mit Bezug auf die Inhalte des Graduiertenkollegs, bestehend aus einem Lehr-Lern-Experiment und den dazugehörigen Begleitmaterialien, konzipiert. Anschließend wurde die Lerneinheit in eine der Wissenschaftskommunikationsmaßnahmen integriert. Je nach Anforderung an die Doktoranden, wurden die Maßnahmen durch vorbereitende Workshops ergänzt. Durch einen halboffenen Pre-Post-Fragebogen wurde der Einfluss der Wissenschaftskommunikationsmaßnahmen und der dazugehörigen Workshops auf die Selbstwirksamkeit der Doktoranden evaluiert, um Rückschlüsse darauf zu ziehen, wie sich die Wahrnehmung der eigenen Kommunikationsfähigkeiten durch die Interventionen verändert. Die Ergebnisse deuten darauf hin, dass die einzelnen Wissenschaftskommunikationsmaßnahmen die verschiedenen Typen in unterschiedlicher Weise beeinflussen. Es ist anzunehmen, dass es abhängig von der eigenen Einschätzung der Kommunikationsfähigkeit unterschiedliche Bedürfnisse der Förderung gibt, die durch dedizierte Wissenschaftskommunikationsmaßnahmen berücksichtigt werden können. Auf dieser Grundlage werden erste Ansätze für eine allgemeingültige Strategie vorgeschlagen, die die individuellen Fähigkeiten zur Wissenschaftskommunikation in einem naturwissenschaftlichen Forschungsverbund fördert. N2 - As part of an exploratory research approach a concept for science communication was developed and evaluated for a research training group that focuses on photochemical processes. The increasing demand for science communication by politics justifies this approach. Furthermore, for future scientists the communication of their own research is demanded to be an integrative part of good scientific practice. To prepare young researchers for the upcoming task at an early stage, science communication is also required in research associations. Hence, a preliminary study was conducted to first investigate the requirements of a science communication concept by evaluating doctoral students’ attitudes towards science communication and their communication skills using a questionnaire comprising closed questions. Moreover, science communication types where derived from the data. Based on these results multiple science communication measures that differ in the conception, the recipients, the form of the communication and their content were developed. With reference to the content of the graduate program an experiment and the accompanying material for teaching was designed. It can be used in schools and extracurricular learning settings. Subsequently, the teaching unit was implemented into one measure. Depending on the requirements of each science communication measure for the doctoral students the measures were complemented by preparatory workshops. Through a semi-open pre-post questionnaire, the impact of the science communication measures and the associated workshops on the doctoral students’ self-efficacy was evaluated. Also, conclusions about how the perception of their own communication skills changed as a result of the intervention could be drawn. The results suggest that the individual science communication measures affect the different types in various ways. It is likely that depending on one’s assessment of communication skills, there are different funding needs that can be addressed through dedicated measures. In this way, a generally applicable strategy which promotes individual science communication skills in a scientific research association will be proposed. KW - Wissenschaftskommunikation KW - Curriculare Innovation KW - Chemie KW - Elektrolumineszenz KW - Lerneinheit KW - Elektrolumineszenz-Folie KW - Wissenschaftskommunikationstypen KW - chemistry KW - curriculum innovation KW - electroluminescence KW - electroluminescent foil KW - learning unit KW - science communication KW - science communication types Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-620357 ER - TY - THES A1 - Riemer, Martin T1 - Vom Phenol zum Naturstoff : Entwicklung nachhaltiger Mikrowellen-vermittelter SUZUKI-MIYAURA-Kupplungen und Tandem-Reaktionen T1 - From phenol to natural products : development of sustainable microwave-mediated Suzuki-Miyaura couplings and tandem reactions N2 - Ziel dieser Arbeit war die Entwicklung von Methoden zur Synthese von auf Phenol basierenden Naturstoffen. Insbesondere wurde bei der Methodenentwicklung die Nachhaltigkeit in den Vordergrund gerückt. Dies bedeutet, dass durch die Zusammenfassung mehrerer Syntheseschritte zu einem (Tandem-Reaktion) beispielsweise unnötige Reaktionsschritte vermieden werden sollten. Ferner sollten im Sinne der Nachhaltigkeit möglichst ungiftige Reagenzien und Lösungmittel verwendet werden, ebenso wie mehrfach wiederverwertbare Katalysatoren zum Einsatz kommen. Im Rahmen dieser Arbeit wurden Methoden zum Aufbau von Biphenolen mittels Pd/C-katalysierten Suzuki-Miyaura-Kupplungen entwickelt. Diese Methoden sind insofern äußerst effizient, da der ansonsten gebräuchliche Syntheseweg über drei Reaktionsschritte somit auf lediglich eine Reaktionsstufe reduziert wurde. Weiterhin wurden die Reaktionsbedingungen so gestaltet, dass einfaches Wasser als vollkommen ungiftiges Lösungsmittel verwendet werden konnte. Des Weiteren wurde für diese Reaktionen ein Katalysator gewählt, der einfach durch Filtration vom Reaktionsgemisch abgetrennt und für weitere Reaktionen mehrfach wiederverwendet werden konnte. Darüber hinaus konnte durch die Synthese von mehr als 100 Verbindungen die breite Anwendbarkeit der Methoden aufgezeigt werden. Mit den entwickelten Methoden konnten 14 Naturstoffe - z. T. erstmals - synthetisiert werden. Derartige Stoffe werden u. a. von den ökonomisch bedeutenden Kernobstgewächsen (Äpfeln, Birnen) als Abwehrmittel gegenüber Schädlingen erzeugt. Folglich konnte mit Hilfe dieser Methoden ein Syntheseweg für potentielle Pflanzenschutzmittel entwickelt werden. Im zweiten Teil dieser Arbeit wurde ein Zugang zu den sich ebenfalls vom Phenol ableitenden Chromanonen, Chromonen und Cumarinen untersucht. Bei diesen Untersuchungen konnte durch die Entwicklung zweier neuer Tandem-Reaktionen ein nachhaltiger und stufenökonomischer Syntheseweg zur Darstellung substituierter Benzo(dihydro)pyrone aufgezeigt werden. Durch die erstmalige Kombination der Claisen-Umlagerung mit einer Oxa-Michael-Addition bzw. konjugierten-Addition wurden zwei vollkommen atomökonomische Reaktionen miteinander verknüpft und somit eine überaus effiente Synthese von allyl- bzw. prenylsubstituierten Chromanonen und Chromonen ermöglicht. Ferner konnten durch die Anwendung einer Claisen-Umlagerung-Wittig-Laktonisierungs-Reaktion allyl- bzw. prenylsubstituierte Cumarine erhalten werden. Herausragendes Merkmal dieser Methoden war, dass in nur einem Schritt der jeweilige Naturstoffgrundkörper aufgebaut und eine lipophile Seitenkette generiert werden konnte. Die Entwicklung dieser Methoden ist von hohem pharmazeutischem Stellenwert, da auf diesen Wegen Verbindungen synthetisiert werden können, die zum einem über das notwendige pharmakologische Grundgerüst verfügen und zum anderen über eine Seitenkette, welche die Aufnahmefähigkeit und damit die Wirksamkeit im Organismus beträchtlich erhöht. Insgesamt konnten mittels der entwickelten Methoden 15 Chromanon-, Chromon- und Cumarin-Naturstoffe z. T. erstmals synthetisiert werden. N2 - The aim of this work was the development of methods for the synthesis of natural products based on phenol. In particular, in developing methods, sustainability has been brought to the fore. This means that, for example, unnecessary reaction steps should be avoided by the combination of several synthetic steps to a (tandem reaction). Furthermore, non-toxic as possible in terms of sustainability reagents and solvents should be used, as well as multiple reusable catalysts are used. In this work, methods have been developed for the synthesis of bisphenols using Pd / C-catalyzed Suzuki-Miyaura coupling reactions. These methods are so far äuÿerst e? Cient, since the otherwise common synthetic route was thus reduced to merely a reaction stage, three reaction steps. Furthermore, the reaction conditions were designed to plain water could be used as a completely non-toxic solvent. It was also elected a catalyst for these reactions, which could be easily separated by filtration from the reaction mixture and reused several times for further reactions. In addition, it could be demonstrated through the synthesis of more than 100 compounds, the broad applicability of the methods. ., For the first time T. - - Using the methods developed 14 natural compounds could be synthesized. Such substances are among others generated by the economically important pome fruit crops (apples, pears) as a defense against pests. Consequently, it could be developed using these methods, a synthetic route for potential plant protection products. In the second part of this work, access to the likewise derived from phenol chromanones, chromones and coumarins was investigated. In these studies, a sustainable and economical route in stages to represent substituted benzo (dihydro) pyrones could be demonstrated by the development of two new tandem reactions. The initial combination of the Claisen rearrangement with an oxa-Michael addition or conjugated addition of two perfectly atom-economical reactions were interlinked and thus allows a very effiente synthesis of allyl or prenylsubstituierten chromanones and chromones. Furthermore or prenylsubstituierte coumarins could be obtained by the application of a Claisen rearrangement Wittig lactonization reaction allyl. The outstanding feature of these methods was that built up in only one step of the respective natural product base and a lipophilic side chain could be generated. The development of these methods is of great pharmaceutical importance, since these paths compounds can be synthesized on a the necessary pharmacological Backbone and on the other hand have a side chain, which increases the absorption and thus the effectiveness in the body considerably. Overall, z. T. were synthesized using the methods developed Chromanon- 15, chromone and coumarin-natural products for the first time. KW - Phenol KW - Biphenol KW - Cumarin KW - Chromon KW - Chromanon KW - phenol KW - biphenol KW - coumarine KW - chromone KW - chromanone Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72525 ER - TY - THES A1 - Schulte-Osseili, Christine T1 - Vom Monomer zum Glykopolymer T1 - From monomer to glycopolymer BT - Anwendung als Biofunktionalitäten auf Oberflächen und als Transportmoleküle BT - application as biofunctionalized surfaces and transport molecules N2 - Glykopolymere sind synthetische und natürlich vorkommende Polymere, die eine Glykaneinheit in der Seitenkette des Polymers tragen. Glykane sind durch die Glykan-Protein-Wechselwirkung verantwortlich für viele biologische Prozesse. Die Beteiligung der Glykanen in diesen biologischen Prozessen ermöglicht das Imitieren und Analysieren der Wechselwirkungen durch geeignete Modellverbindungen, z.B. der Glykopolymere. Dieses System der Glykan-Protein-Wechselwirkung soll durch die Glykopolymere untersucht und studiert werden, um die spezifische und selektive Bindung der Proteine an die Glykopolymere nachzuweisen. Die Proteine, die in der Lage sind, Kohlenhydratstrukturen selektiv zu binden, werden Lektine genannt. In dieser Dissertationsarbeit wurden verschiedene Glykopolymere synthetisiert. Dabei sollte auf einen effizienten und kostengünstigen Syntheseweg geachtet werden. Verschiedene Glykopolymere wurden durch funktionalisierte Monomere mit verschiedenen Zuckern, wie z.B. Mannose, Laktose, Galaktose oder N-Acetyl-Glukosamin als funktionelle Gruppe, hergestellt. Aus diesen funktionalisierten Glykomonomeren wurden über ATRP und RAFT-Polymerisation Glykopolymere synthetisiert. Die erhaltenen Glykopolymere wurden in Diblockcopolymeren als hydrophiler Block angewendet und die Selbstassemblierung in wässriger Lösung untersucht. Die Polymere formten in wässriger Lösung Mizellen, bei denen der Zuckerblock an der Oberfläche der Mizellen sitzt. Die Mizellen wurden mit einem hydrophoben Fluoreszenzfarbstoff beladen, wodurch die CMC der Mizellenbildung bestimmt werden konnte. Außerdem wurden die Glykopolymere als Oberflächenbeschichtung über „Grafting from“ mit SI-ATRP oder über „Grafting to“ auf verschiedene Oberflächen gebunden. Durch die glykopolymerbschichteten Oberflächen konnte die Glykan Protein Wechselwirkung über spektroskopische Messmethoden, wie SPR- und Mikroring Resonatoren untersucht werden. Hierbei wurde die spezifische und selektive Bindung der Lektine an die Glykopolymere nachgewiesen und die Bindungsstärke untersucht. Die synthetisierten Glykopolymere könnten durch Austausch der Glykaneinheit für andere Lektine adressierbar werden und damit ein weites Feld an anderen Proteinen erschließen. Die bioverträglichen Glykopolymere wären alternativen für den Einsatz in biologischen Prozessen als Transporter von Medikamenten oder Farbstoffe in den Körper. Außerdem könnten die funktionalisierten Oberflächen in der Diagnostik zum Erkennen von Lektinen eingesetzt werden. Die Glykane, die keine selektive und spezifische Bindung zu Proteinen eingehen, könnten als antiadsorptive Oberflächenbeschichtung z.B. in der Zellbiologie eingesetzt werden. N2 - Glycopolymers are synthetic and naturally occurring polymers that carry a gylcan unit in the side chain of the polymer. Glycans are responsible for many biological processes due to the glycn-protein interaction. The involvement of glcans in these biological processes enables the imitation and analysis of interactions by suitable model coumponds, e.g. glycopolymers. This system of glycan-protein interaction will be investigated and studied by glycopolymers in order to demonstrate the specific and selective binding of proteins to glycopolymers. The proteins that are able to selectively bind carbohydrate structures are called lectins. In this dissertation different glycopolymers were synthesized. Care should be taken to ensure an effficient and cost-effective synthesis route. Different glycopolymers were produced by functionalized monomers with different sugars, such as mannose, lactose, galactose or N-acetyl-glucosamine as functional group. From these functionalized glycomonomers, glycopolymers were synthesized via ATRP and RAFT polymerization. The glycopolymers obtained were used as hydrophilic blocks in diblock copolymers and self-assembly in aqueous solution was investigated. In aqueoussolution, the polymers formed micelles in which the sugar block sits on the surface of the micelles. The micelles were loaded with a hydrophobic fluorescent dxe, which made it possible to determine the CMC of micelle formation. In additiom, the glycopolymers were bound to various surfaces as surface coatings via “grafting from” with SI-ATRP or via “grafting to”. Through the glycopolymer-coated surfaces, the glycan-protein interaction could be investigated by spectroscpic measurement methods such as SPR and microring resonators. The specific and selective binding of lectins to the glycopolymers was detected and the binding strength was investigated. The synthesised glycopolymers could become adressable for other lectins by exchanging the glycan unit and thus open up a broad field of other proteins. The biocompatible glycopolymers would be an alternative for use in iological processes as transporters of drugs or dyes into the body. In addtion, the functionalised surfaces could be used in diagnostics for regognition of lectins. The glycan, which do nit bind selectively and specifically to proetins, could be used as anit-adsoptive surface coatings, e.g. in cell biology. KW - Glykopolymere KW - Polymerisation KW - Oberflächenbeschichtung KW - Lektine KW - Glykan-Protein-Wechselwirkung KW - glycopolymers KW - polymerization KW - surface modification KW - lectins KW - glycan-protein interaction Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432169 ER - TY - JOUR A1 - Mickler, Wulfhard A1 - Mönner, Anke A1 - Hefele, Heike A1 - Ludwig, Eberhard A1 - Uhlemann, Erhard T1 - Voltammetric studies of non-oxo Vanadium (IV)-chelates Y1 - 1997 ER - TY - JOUR A1 - Friedrich, Alwin A1 - Hefele, Heike A1 - Mickler, Wulfhard A1 - Mönner, Anke A1 - Uhlemann, Erhard A1 - Scholz, F. T1 - Voltammetric and potentiometric studies on the stability of vanadium(IV) complexes : a comparision of sulution phase voltammetry with the voltammetry of the microcrystalline solid compounds Y1 - 1998 ER - TY - JOUR A1 - Sun, Fu A1 - Dong, Kang A1 - Osenberg, Markus A1 - Hilger, Andre A1 - Risse, Sebastian A1 - Lu, Yan A1 - Kamm, Paul H. A1 - Klaus, Manuela A1 - Markoetter, Henning A1 - Garcia-Moreno, Francisco A1 - Arlt, Tobias A1 - Manke, Ingo T1 - Visualizing the morphological and compositional evolution of the interface of InLi-anode|thio-LISION electrolyte in an all-solid-state Li-S cell by in operando synchrotron X-ray tomography and energy dispersive diffraction JF - Journal of materials chemistry : A, Materials for energy and sustainability N2 - Dynamic and direct visualization of interfacial evolution is helpful in gaining fundamental knowledge of all-solid-state-lithium battery working/degradation mechanisms and clarifying future research directions for constructing next-generation batteries. Herein, in situ and in operando synchrotron X-ray tomography and energy dispersive diffraction were simultaneously employed to record the morphological and compositional evolution of the interface of InLi-anode|sulfide-solid-electrolyte during battery cycling. Compelling morphological evidence of interfacial degradation during all-solid-state-lithium battery operation has been directly visualized by tomographic measurement. The accompanying energy dispersive diffraction results agree well with the observed morphological deterioration and the recorded electrochemical performance. It is concluded from the current investigation that a fundamental understanding of the phenomena occurring at the solid-solid electrode|electrolyte interface during all-solid-state-lithium battery cycling is critical for future progress in cell performance improvement and may determine its final commercial viability. Y1 - 2018 U6 - https://doi.org/10.1039/c8ta08821g SN - 2050-7488 SN - 2050-7496 VL - 6 IS - 45 SP - 22489 EP - 22496 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Klod, Sabrina A1 - Koch, Andreas T1 - Visualization of through space NMR shieldings of aromatic and anti-aromatic molecules and a simple means to compare and estimate aromaticity N2 - Through space NMR shieldings of aromatic (benzene, mono-substituted and annelated benzenes, ferrocene, [14]- and [18]-annulenes, phenylenes and tetra- to heptahelicene) and anti-aromatic molecules (cyclobutadiene and pentalene) were assessed by ab initio molecular-orbital calculations. Employing the nucleus-independent chemical shifts (NICS) concept, these through space NMR shieldings were visualized as iso-chemical-shielding surfaces (ICSSs) and can be applied quantitatively to determine the stereochemistry of proximal nuclei. In addition, the distances in Å at ICSS values of ±0.1 ppm in-plane and perpendicular-to-center of the aromatic ring system were employed as a simple means to compare and estimate qualitatively the aromaticity of the systems at hand. Y1 - 2007 UR - http://www.sciencedirect.com/science/journal/01661280 U6 - https://doi.org/10.1016/j.theochem.2007.02.049 SN - 0166-1280 ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Koch, Andreas T1 - Visualization of homoaromaticity in cations, neutral molecules and anions by spatial magnetic properties (through space NMR shieldings) - an 1H/13C NMR chemical shift study N2 - Prototypes for homoaromaticity in cations, neutral molecules, and anions are theoretically studied at the MP2 level of theory. For the global minimum structures on the potential energy surface both 1H/13C chemical shifts and spatial magnetic properties as through space NMR shieldings (TSNMRS) were calculated by the GIAO perturbation method. The TSNMRS are visualized as iso-chemical-shielding surfaces (ICSS) of different sign and size. Coincident experimental and computed 1H/13C chemical shifts afforded the possibility to decide from the TSNMRSs at hand on both the existence and the size of homoaromaticity in the molecules studied. Y1 - 2009 UR - http://www.sciencedirect.com/science/journal/00404020 U6 - https://doi.org/10.1016/j.tet.2009.04.063 SN - 0040-4020 ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Koch, Andreas A1 - Seidl, Peter R. T1 - Visualization and quantification of the anisotropic effect of C=C double bonds on 1H NMR spectra of highly congested hydrocarbons-indirect estimates of steric strain N2 - The anisotropic effect of the olefinic C=C double bond has been calculated by employing the NICS (nucleus independent chemical shift) concept and visualized as an anisotropic cone by a through space NMR shielding grid. Sign and size of this spatial effect on 1H chemical shifts of protons in norbornene, exo- and endo-2-methylnorbornenes, and in three highly congested tetracyclic norbornene analogs have been compared with the experimental 1H NMR spectra as far as published. 1H NMR spectra have also been calculated at the HF/6-31G* level of theory to get a full, comparable set of proton chemical shifts. Differences between ;(1H)/ppm and the calculated anisotropic effect of the C=C double bond are discussed in terms of the steric compression that occurs in the compounds studied. Y1 - 2008 UR - http://pubs.acs.org/doi/full/10.1021/jp801063t U6 - https://doi.org/10.1021/Jp801063t ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Szatmári, István A1 - Lázár, László A1 - Koch, Andreas A1 - Heydenreich, Matthias A1 - Fulop, Ferenc T1 - Visualization and quantification of anisotropic effects on the 1H NMR spectra of 1,3-oxazino[4,3- alpha]isoquinolines - indirect estimates of steric compression N2 - The anisotropic effects of the phenyl, alpha- and beta-naphthyl moieties in four series of 1,3-oxazino[4,3- a]isoquinolines on the H-1 chemical shifts of the isoquinoline protons were calculated by employing the Nucleus Independent Chemical Shift (NICS) concept and Visualized as anisotropic cones by a through-space NMR shielding grid. The signs and extents of these spatial effects on the H-1 chemical shifts of the isoquinoline protons were compared with the experimental H-1 NMR spectra. The differences between the experimental delta (H-1)/ppm values and the calculated anisotropic effects of the aromatic moieties are discussed in terms of the steric compression that occurs in the Compounds studied. Y1 - 2009 U6 - https://doi.org/10.1016/j.tet.2009.07.038 SN - 0040-4020 ER - TY - JOUR A1 - Ugwuja, Chidinma G. A1 - Adelowo, Olawale O. A1 - Ogunlaja, Aemere A1 - Omorogie, Martins O. A1 - Olukanni, Olumide D. A1 - Ikhimiukor, Odion O. A1 - Iermak, Ievgeniia A1 - Kolawole, Gabriel A. A1 - Günter, Christina A1 - Taubert, Andreas A1 - Bodede, Olusola A1 - Moodley, Roshila A1 - Inada, Natalia M. A1 - Camargo, Andrea S.S. de A1 - Unuabonah, Emmanuel Iyayi T1 - Visible-Light-Mediated Photodynamic Water Disinfection @ Bimetallic-Doped Hybrid Clay Nanocomposites JF - ACS applied materials & interfaces N2 - This study reports a new class of photocatalytic hybrid clay nanocomposites prepared from low-cost sources (kaolinite clay and Carica papaya seeds) doped with Zn and Cu salts via a solvothermal process. X-ray diffraction analysis suggests that Cu-doping and Cu/Zn-doping introduce new phases into the crystalline structure of Kaolinite clay, which is linked to the reduced band gap of kaolinite from typically between 4.9 and 8.2 eV to 2.69 eV for Cu-doped and 1.5 eV for Cu/Zn hybrid clay nanocomposites (Nisar, J.; Arhammar, C.; Jamstorp, E.; Ahuja, R. Phys. Rev. B 2011, 84, 075120). In the presence of solar light irradiation, Cu- and Cu/Zn-doped nanocomposites facilitate the electron hole pair separation. This promotes the generation of singlet oxygen which in turn improves the water disinfection efficiencies of these novel nanocomposite materials. The nanocomposite materials were further characterized using high-resolution scanning electron microscopy, fluorimetry, therrnogravimetric analysis, and Raman spectroscopy. The breakthrough times of the nanocomposites for a fixed bed mode of disinfection of water contaminated with 2.32 x 10(7) cfu/mL E. coli ATCC 25922 under solar light irradiation are 25 h for Zn-doped, 30 h for Cu-doped, and 35 h for Cu/Zn-doped nanocomposites. In the presence of multidrug and multimetal resistant strains of E. coli, the breakthrough time decreases significantly. Zn-only doped nanocomposites are not photocatalytically active. In the absence of light, the nanocomposites are still effective in decontaminating water, although less efficient than under solar light irradiation. Electrostatic interaction, metal toxicity, and release of singlet oxygen (only in the Cu-doped and Cu/Zn-doped nanocomposites) are the three disinfection mechanisms by which these nanocomposites disinfect water. A regrowth study indicates the absence of any living E. coli cells in treated water even after 4 days. These data and the long hydraulic times (under gravity) exhibited by these nanocomposites during photodisinfection of water indicate an unusually high potential of these nanocomposites as efficient, affordable, and sustainable point-of-use systems for the disinfection of water in developing countries. KW - disinfection KW - nanocomposite material KW - multidrug-resistant Escherichia coli KW - water KW - reactive oxygen species Y1 - 2019 U6 - https://doi.org/10.1021/acsami.9b01212 SN - 1944-8244 SN - 1944-8252 VL - 11 IS - 28 SP - 25483 EP - 25494 PB - American Chemical Society CY - Washington, DC ER - TY - JOUR A1 - Xiong, Tao A1 - Włodarczyk, Radosław Stanisław A1 - Gallandi, Lukas A1 - Körzdörfer, Thomas A1 - Saalfrank, Peter T1 - Vibrationally resolved photoelectron spectra of lower diamondoids BT - a time-dependent approach JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry N2 - Vibrationally resolved lowest-energy bands of the photoelectron spectra (PES) of adamantane, diamantane, and urotropine were simulated by a time-dependent correlation function approach within the harmonic approximation. Geometries and normal modes for neutral and cationic molecules were obtained from B3LYP hybrid density functional theory (DFT). It is shown that the simulated spectra reproduce the experimentally observed vibrational finestructure (or its absence) quite well. Origins of the finestructure are discussed and related to recurrences of autocorrelation functions and dominant vibrations. Remaining quantitative and qualitative errors of the DFT-derived PES spectra refer to (i) an overall redshift by ∼0.5 eV and (ii) the absence of satellites in the high-energy region of the spectra. The former error is shown to be due to the neglect of many-body corrections to ordinary Kohn-Sham methods, while the latter has been argued to be due to electron-nuclear couplings beyond the Born-Oppenheimer approximation [Gali et al., Nat. Commun. 7, 11327 (2016)]. Y1 - 2018 U6 - https://doi.org/10.1063/1.5012131 SN - 0021-9606 SN - 1089-7690 VL - 148 IS - 4 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Banerjee, Shiladitya A1 - Stueker, Tony A1 - Saalfrank, Peter T1 - Vibrationally resolved optical spectra of modified diamondoids obtained from time-dependent correlation function methods JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Optical properties of modified diamondoids have been studied theoretically using vibrationally resolved electronic absorption, emission and resonance Raman spectra. A time-dependent correlation function approach has been used for electronic two-state models, comprising a ground state (g) and a bright, excited state (e), the latter determined from linear-response, time-dependent density functional theory (TD-DFT). The harmonic and Condon approximations were adopted. In most cases origin shifts, frequency alteration and Duschinsky rotation in excited states were considered. For other cases where no excited state geometry optimization and normal mode analysis were possible or desired, a short-time approximation was used. The optical properties and spectra have been computed for (i) a set of recently synthesized sp(2)/sp(3) hybrid species with CQC double-bond connected saturated diamondoid subunits, (ii) functionalized (mostly by thiol or thione groups) diamondoids and (iii) urotropine and other C-substituted diamondoids. The ultimate goal is to tailor optical and electronic features of diamondoids by electronic blending, functionalization and substitution, based on a molecular-level understanding of the ongoing photophysics. Y1 - 2015 U6 - https://doi.org/10.1039/c5cp02615f SN - 1463-9076 SN - 1463-9084 VL - 17 IS - 29 SP - 19656 EP - 19669 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Banerjee, Shiladitya A1 - Stüker, Tony A1 - Saalfrank, Peter T1 - Vibrationally resolved optical spectra of modified diamondoids obtained from time-dependent correlation function methods N2 - Optical properties of modified diamondoids have been studied theoretically using vibrationally resolved electronic absorption, emission and resonance Raman spectra. A time-dependent correlation function approach has been used for electronic two-state models, comprising a ground state (g) and a bright, excited state (e), the latter determined from linear-response, time-dependent density functional theory (TD-DFT). The harmonic and Condon approximations were adopted. In most cases origin shifts, frequency alteration and Duschinsky rotation in excited states were considered. For other cases where no excited state geometry optimization and normal mode analysis were possible or desired, a short-time approximation was used. The optical properties and spectra have been computed for (i) a set of recently synthesized sp2/sp3 hybrid species with C[double bond, length as m-dash]C double-bond connected saturated diamondoid subunits, (ii) functionalized (mostly by thiol or thione groups) diamondoids and (iii) urotropine and other C-substituted diamondoids. The ultimate goal is to tailor optical and electronic features of diamondoids by electronic blending, functionalization and substitution, based on a molecular-level understanding of the ongoing photophysics. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 211 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-86826 ER - TY - JOUR A1 - Banerjee, Shiladitya A1 - Stüker, Tony A1 - Saalfrank, Peter T1 - Vibrationally resolved optical spectra of modified diamondoids obtained from time-dependent correlation function methods JF - Physical chemistry, chemical physics : PCCP ; a journal of European chemical societies N2 - Optical properties of modified diamondoids have been studied theoretically using vibrationally resolved electronic absorption, emission and resonance Raman spectra. A time-dependent correlation function approach has been used for electronic two-state models, comprising a ground state (g) and a bright, excited state (e), the latter determined from linear-response, time-dependent density functional theory (TD-DFT). The harmonic and Condon approximations were adopted. In most cases origin shifts, frequency alteration and Duschinsky rotation in excited states were considered. For other cases where no excited state geometry optimization and normal mode analysis were possible or desired, a short-time approximation was used. The optical properties and spectra have been computed for (i) a set of recently synthesized sp2/sp3 hybrid species with C[double bond, length as m-dash]C double-bond connected saturated diamondoid subunits, (ii) functionalized (mostly by thiol or thione groups) diamondoids and (iii) urotropine and other C-substituted diamondoids. The ultimate goal is to tailor optical and electronic features of diamondoids by electronic blending, functionalization and substitution, based on a molecular-level understanding of the ongoing photophysics. Y1 - 2015 U6 - https://doi.org/10.1039/C5CP02615F SN - 1463-9084 SN - 1463-9076 VL - 17 IS - 29 SP - 19656 EP - 19669 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Xiong, Tao T1 - Vibrationally resolved absorption, emission, resonance Raman and photoelectron spectra of selected organic molecules, associated radicals and cations T1 - Schwingungsaufgelöste Absorptions-, Emissions-, Resonanz-Raman- und Photoelektronenspektren ausgewählter organischer Moleküle, assoziierter Radikale und Kationen BT - a time-dependent approach BT - ein zeitabhängiger Ansatz N2 - Time-dependent correlation function based methods to study optical spectroscopy involving electronic transitions can be traced back to the work of Heller and coworkers. This intuitive methodology can be expected to be computationally efficient and is applied in the current work to study the vibronic absorption, emission, and resonance Raman spectra of selected organic molecules. Besides, the "non-standard" application of this approach to photoionization processes is also explored. The application section consists of four chapters as described below. In Chapter 4, the molar absorptivities and vibronic absorption/emission spectra of perylene and several of its N-substituted derivatives are investigated. By systematically varying the number and position of N atoms, it is shown that the presence of nitrogen heteroatoms has a negligible effect on the molecular structure and geometric distortions upon electronic transitions, while spectral properties are more sensitive: In particular the number of N atoms is important while their position is less decisive. Thus, N-substitution can be used to fine-tune the optical properties of perylene-based molecules. In Chapter 5, the same methods are applied to study the vibronic absorption/emission and resonance Raman spectra of a newly synthesized donor-acceptor type molecule. The simulated absorption/emission spectra agree fairly well with experimental data, with discrepancies being attributed to solvent effects. Possible modes which may dominate the fine-structure in the vibronic spectra are proposed by analyzing the correlation function with the aid of Raman and resonance Raman spectra. In the next two chapters, besides the above types of spectra, the methods are extended to study photoelectron spectra of several small diamondoid-related systems (molecules, radicals, and cations). Comparison of the photoelectron spectra with available experimental data suggests that the correlation function based approach can describe ionization processes reasonably well. Some of these systems, cationic species in particular, exhibit somewhat peculiar optical behavior, which presents them as possible candidates for functional devices. Correlation function based methods in a more general sense can be very versatile. In fact, besides the above radiative processes, formulas for non-radiative processes such as internal conversion have been derived in literature. Further implementation of the available methods is among our next goals. N2 - Molekülsysteme bestehen aus Kernen und Elektronen, deren viel kleinere Masse sie in die Lage versetzten, sich der Bewegung des ersteren augenblicklich anzupassen. Daher ist die Bewegung der Elektronen und Kerne in einer guten ersten Annäherung "unabhängig", und die Energie der Elektronen kann zuerst berechnet werden, vorausgesetzt, die Kerne sind stationär. Die so gewonnene elektronische Energie wird zur Abstoßungsenergie zwischen den Kernen addiert, um ein Potential zu erhalten, das die Bewegung der Kerne bestimmt. Quantenmechanisch können sowohl die Elektronen als auch die Kerne nur bestimmte Energieniveaus haben. Die molekulare vibronische (= Schwingung + Elektronik) Absorptionsspektroskopie beinhaltet den Übergang der Elektronen und Kerne von ihrem Anfangs- in ihren Endzustand durch Photonenabsorption. Die größere elektronische Übergangsenergie bestimmt die Position des Absorptionsmaximums, während die kleinere nukleare Schwingungsübergangsenergie (ohne Berücksichtigung von Translation und Rotation) die Position der Teilmaxima innerhalb des Absorptionsbereichs bestimmt, wodurch die vibronische Feinstruktur entsteht. Ähnliche Ideen gelten auch für die vibronische Emissionsspektroskopie. Die Resonanz-Raman-Spektroskopie untersucht die Energieänderung des einfallenden Photons (dessen Energie ausreichend ist, um die Elektronen in einen höheren elektronischen Zustand anzuregen), nachdem es mit dem Molekül wechselwirkt. Der Energiegewinn oder -verlust des einfallenden Photons bewirkt eine Änderung des Schwingungszustandes. Die Photoelektronenspektroskopie ist ähnlich wie die vibronische Absorption, benötigt aber in der Regel mehr Energie des einfallenden Photons, da neben der Anregung des Moleküls in einen höheren vibronischen Zustand zusätzliche Energie benötigt wird, um ein Elektron aus dem Molekül zu entfernen. Diese spektroskopischen Techniken liefern wertvolle Informationen über die elektronische und nukleare Bewegung des Moleküls. Theoretisch können wir eine zeitabhängige Korrelationsfunktion verwenden, um die Spektren zu simulieren. Die Korrelationsfunktion für die Absorption ist beispielsweise eine Funktion der Zeit, deren Entwicklung Informationen über die elektronischen Energien und die nukleare Bewegung enthält. Um das Absorptionsspektrum in Form von Energie zu erhalten, wird ein mathematisches Verfahren, die so genannte Fourier-Transformation, auf die zeitabhängige Korrelationsfunktion angewendet, um ein energieabhängiges Spektrum zu erhalten. Diese Methode wird auf ausgewählte organische Moleküle, darunter einige Radikale und Kationen, angewandt, um deren elektronisches und optisches Verhalten unter dem Einfluss von einfallendem Licht zu untersuchen und Einblicke in das Design neuer optoelektronischer Bauelemente zu gewinnen. Bei einigen Molekülen/Systemen wird die vibronische Feinstruktur durch Faktoren wie molekulare Zusammensetzung und Umgebung wie Lösungsmittel beeinflusst, was darauf hindeutet, dass diese Systeme zur Feinabstimmung der gewünschten Eigenschaften verwendet werden können. Für andere Systeme gibt es fast keine sichtbare vibronische Feinstruktur, was bedeutet, dass sich die nukleare Bewegung solcher Systeme im Allgemeinen von derjenigen der vorherigen Kategorie unterscheidet. KW - vibrationally resolved electronic spectroscopy KW - photoelectron spectroscopy KW - resonance Raman spectroscopy KW - correlation function KW - ionization potential KW - time-dependent density functional theory KW - perylene KW - diamondoid KW - Schwingungsaufgelöste UV/VIS-Spektroskopie KW - Photoelektronenspektroskopie KW - Resonanz-Raman-Spektroskopie KW - Korrelationsfunktion KW - Ionisationspotential KW - Zeitabhängige Dichtefunktionaltheorie KW - Perylen KW - Diamondoide Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418105 ER - TY - JOUR A1 - Banerjee, Shiladitya A1 - Saalfrank, Peter T1 - Vibrationally resolved absorption, emission and resonance Raman spectra of diamondoids: a study based on time-dependent correlation functions JF - Physical chemistry, chemical physics : a journal of European Chemical Societies Y1 - 2014 U6 - https://doi.org/10.1039/c3cp53535e SN - 1463-9076 SN - 1463-9084 VL - 16 IS - 1 SP - 144 EP - 158 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Banerjee, Shiladitya A1 - Saalfrank, Peter T1 - Vibrationally resolved absorption, emission and resonance Raman spectra of diamondoids : a study based on time- dependent correlation functions Y1 - 2014 UR - http://pubs.rsc.org/en/content/articlehtml/2014/cp/c3cp53535e U6 - https://doi.org/10.1039/C3CP53535E ER - TY - GEN A1 - Banerjee, Shiladitya A1 - Saalfrank, Peter T1 - Vibrationally resolved absorption, emission and resonance Raman spectra of diamondoids BT - a study based on time-dependent correlation functions N2 - The time-dependent approach to electronic spectroscopy, as popularized by Heller and coworkers in the 1980's, is applied here in conjunction with linear-response, time-dependent density functional theory to study vibronic absorption, emission and resonance Raman spectra of several diamondoids. Two-state models, the harmonic and the Condon approximations, are used for the calculations, making them easily applicable to larger molecules. The method is applied to nine pristine lower and higher diamondoids: adamantane, diamantane, triamantane, and three isomers each of tetramantane and pentamantane. We also consider a hybrid species “Dia = Dia” – a shorthand notation for a recently synthesized molecule comprising two diamantane units connected by a C[double bond, length as m-dash]C double bond. We resolve and interpret trends in optical and vibrational properties of these molecules as a function of their size, shape, and symmetry, as well as effects of “blending” with sp2-hybridized C-atoms. Time-dependent correlation functions facilitate the computations and shed light on the vibrational dynamics following electronic transitions. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 238 KW - adamantane KW - models KW - molecules KW - states KW - thermochemistry Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94542 SP - 144 EP - 158 ER - TY - JOUR A1 - Xiong, Tao A1 - Wlodarczyk, Radoslaw A1 - Saalfrank, Peter T1 - Vibrationally resolved absorption and fluorescence spectra of perylene and N-substituted derivatives from autocorrelation function approaches JF - Chemical physics : a journal devoted to experimental and theoretical research involving problems of both a chemical and physical nature N2 - Vibrationally resolved absorption and emission (fluorescence) spectra of perylene and its N-derivatives in gas phase and in solution (acetonitrile) were simulated using a time-dependent approach based on correlation functions determined by density functional theory. By systematically varying the number and position of N atoms, it is shown that the presence of nitrogen heteroatoms has a negligible effect on the molecular structure and geometric distortions upon electronic transitions, while spectral properties change: in particular the number of N atoms is important while their position is less decisive. Thus, the N-substitution can be used to fine-tune the optical properties of perylene-based molecules. KW - Perylene KW - Vibronic spectrum KW - Correlation function KW - Dimer KW - Excimer KW - PCM Y1 - 2018 U6 - https://doi.org/10.1016/j.chemphys.2018.06.011 SN - 0301-0104 SN - 1873-4421 VL - 515 SP - 728 EP - 736 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Vazhappilly, Tijo Joseph T1 - Vibrationally enhanced associative photodesorption of H2 (D2) from Ru(0001) : quantum and classical approaches T1 - Vibrationsgesteigerte assoziative Photodesorptionvon H2 (D2 ) von Ru(0001) : Quantendynamische und klassiche Simulationen N2 - Nowadays, reactions on surfaces are attaining great scientific interest because of their diverse applications. Some well known examples are production of ammonia on metal surfaces for fertilizers and reduction of poisonous gases from automobiles using catalytic converters. More recently, also photoinduced reactions at surfaces, useful, \textit{e.g.}, for photocatalysis, were studied in detail. Often, very short laser pulses are used for this purpose. Some of these reactions are occurring on femtosecond (1 fs=$10^{-15}$ s) time scales since the motion of atoms (which leads to bond breaking and new bond formation) belongs to this time range. This thesis investigates the femtosecond laser induced associative photodesorption of hydrogen, H$_2$, and deuterium, D$_2$, from a ruthenium metal surface. Many interesting features of this reaction were explored by experimentalists: (i) a huge isotope effect in the desorption probability of H$_2$ and D$_2$, (ii) the desorption yield increases non-linearly with the applied visible (vis) laser fluence, and (iii) unequal energy partitioning to different degrees of freedom. These peculiarities are due to the fact that an ultrashort vis pulse creates hot electrons in the metal. These hot electrons then transfer energy to adsorbate vibrations which leads to desorption. In fact, adsorbate vibrations are strongly coupled to metal electrons, \textit{i.e.}, through non-adiabatic couplings. This means that, surfaces introduce additional channels for energy exchange which makes the control of surface reactions more difficult than the control of reactions in the gas phase. In fact, the quantum yield of surface photochemical reactions is often notoriously small. One of the goals of the present thesis is to suggest, on the basis of theoretical simulations, strategies to control/enhance the photodesorption yield of H$_2$ and D$_2$ from Ru(0001). For this purpose, we suggest a \textit{hybrid scheme} to control the reaction, where the adsorbate vibrations are initially excited by an infrared (IR) pulse, prior to the vis pulse. Both \textit{adiabatic} and \textit{non-adiabatic} representations for photoinduced desorption problems are employed here. The \textit{adiabatic} representation is realized within the classical picture using Molecular Dynamics (MD) with electronic frictions. In a quantum mechanical description, \textit{non-adiabatic} representations are employed within open-system density matrix theory. The time evolution of the desorption process is studied using a two-mode reduced dimensionality model with one vibrational coordinate and one translational coordinate of the adsorbate. The ground and excited electronic state potentials, and dipole function for the IR excitation are taken from first principles. The IR driven vibrational excitation of adsorbate modes with moderate efficiency is achieved by (modified) $\pi$-pulses or/and optimal control theory. The fluence dependence of the desorption reaction is computed by including the electronic temperature of the metal calculated from the two-temperature model. Here, our theoretical results show a good agreement with experimental and previous theoretical findings. We then employed the IR+vis strategy in both models. Here, we found that vibrational excitation indeed promotes the desorption of hydrogen and deuterium. To summarize, we conclude that photocontrol of this surface reaction can be achieved by our IR+vis scheme. N2 - Heutzutage werden Reaktionen auf Oberflächen wegen ihrer vielfältigen Anwendungen intensiv untersucht. Einige der bekannten Beispiele sind die Herstellung von Ammoniak auf Metalloberflächen für die Kunstdüngerproduktion und die Reduktion giftiger Abgase in Autokatalysatoren. In letzter Zeit wurden auch photoinduzierte Reaktionen an Oberflächen eingehender untersucht, die z.B. für die Photokatalyse verwandt werden können. Häufig werden in diesen Untersuchungen sehr kurze Laserpulse benutzt. Einige der Reaktionen finden auf einer Femtosekunden-Zeitskala \mbox{(1 fs =10$^{-15}$ s)} statt, da die Bewegungen einzelner Atome in derart kurzen Zeitspannen ablaufen (durch die der Bindungsbruch und das Knüpfen neuer Bindungen verursacht wird). Diese Arbeit untersucht die femtosekunden-laserinduzierte assoziative Photodesorption von Wasserstoff, H$_2$, und Deuterium, D$_2$, von einer Rutheniumoberfläche. Viele interessante Eigenschaften dieser Reaktion wurden in Experimenten entdeckt: (i) ein großer Isotopeneffekt in der Desorptionswahrscheinlichkeit von H$_2$ und D$_2$, (ii) die Desorptionsausbeute steigt nicht-linear mit der (vis) Laserfluenz an und (iii) eine Nicht-Gleichverteilung der Energie auf die einzelnen Freiheitsgrade. Diese Auffälligkeiten sind durch den Umstand verursacht, dass der ultrakurze vis-Laserpuls heiße Elektronen im Metall erzeugt. Die heißen Elektronen transferieren dann Energie in die Schwingungen des Adsorbats, was zur Desorption führt. Tatsächlich sind die Adsorbatschwingungen stark an die Elektronen gekoppelt, nämlich durch nicht-adiabatische Kopplungen. Dies bedeutet, dass durch Oberflächen neue Kanäle für den Energietransfer geöffnet werden, was die Kontrolle von Oberflächenreaktionen im Vergleich zu solchen in der Gasphase erschwert. In der Tat sind die Quantenausbeuten von photochemischen Oberflächenreaktionen bekannterweise klein. Eines der Ziele in der vorliegenden Arbeit ist es auf der Basis von theoretischen Simulationen Strategien vorzuschlagen, um die Photodesorptionsausbeute von H$_2$ und D$_2$ von Ru(0001) zu kontrollieren bzw. zu verbessern. Zu diesem Zweck schlagen wir ein gemischtes Kontrollschema für die Reaktion vor, bei dem zunächst die Adsorbatschwingungen vor dem vis-Puls durch einen infraroten (IR) Puls angeregt werden. Sowohl adiabatische als auch nicht-adiabatische Repräsentationen für photoinduzierte Desorptionsprozesse werden dabei benutzt. Die adiabatische Repräsentation ist in klassischen Molekulardynamik-Simulationen mit elektronischer Reibung verwirklicht. In einer quantenmechanischen Beschreibung werden nicht-adiabatische Repräsentationen innerhalb der Dichtematrixtheorie für offene Quantensysteme verwandt. Die zeitliche Entwicklung des Desorptionsprozesses wird in einem Zwei-Modenmodell reduzierter Dimensionalität mit einer Schwingungs- und einer Translationskoordinate des Adsorbats beschrieben. Die Potentiale für den elektronische Grundzustand und den angeregten Zustand sind abgeleitet aus quantenchemischen Rechnungen (\textsl{first principles}). Die IR-getriebene Schwingungsanregung der Adsorbatmoden mit moderatem Wirkungsgrad wird mit (modifizierten) $\pi$-Pulsen und/oder der Theorie der optimalen Kontrolle erreicht. Die Abhängigkeit der Desorption von der Fluenz wird mit Hilfe der elektronischen Temperatur des Metalls berechnet, welche im Rahmen des Zwei-Temperatur-Modells bestimmt wird. Dabei weisen unsere Ergebnisse eine gute Übereinstimmung mit experimentellen und früheren theoretischen Arbeiten auf. Daraufhin wandten wir die IR+vis Strategie in beiden Modellen an. Dadurch konnten wir zeigen, dass Schwingungsanregung in der Tat die Desorption von Wasserstoff und Deuterium begünstigt. Zusammenfassend stellen wir fest, dass die Photokontrolle dieser Oberflächenreaktion durch unser IR+vis Schema erreichbar ist. KW - Quantendynamische Simulationen KW - Klassiche Simulationen KW - assoziative Photodesorption KW - Schwingungsanregung KW - Photodesorption KW - quantum dynamics KW - classical dynamics KW - vibrational control KW - vibrational excitation Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19056 ER - TY - JOUR A1 - Xiong, Tao A1 - Saalfrank, Peter T1 - Vibrationally Broadened Optical Spectra of Selected Radicals and Cations Derived from Adamantane: A Time-Dependent Correlation Function Approach JF - The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment & general theory N2 - Diamondoids are hydrogen-saturated molecular motifs cut out of diamond, forming a class of materials with tunable optoelectronic properties. In this work, we extend previous work on neutral, closed-shell diamondoids by computing with hybrid density functional theory and time-dependent correlation functions vibrationally broadened absorption spectra of cations and radicals derived from the simplest diamondoid, adamantane, namely, the neutral 1- and 2-adamantyl radicals (C10H15), the 1- and 2-adamantyl cations (C10H15+), and the adamantane radical cation (C10H16+). For selected cases, we also report vibrationally broadened emission, photoelectron, and resonance Raman spectra. Furthermore, the effect of the damping factor on the vibrational fine-structure is studied. The following trends are found: (1) Low-energy absorptions of the adamantyl radicals and cations, and of the adamantane cation, are all strongly red-shifted with respect to adamantane; (2) also, emission spectra are strongly red-shifted, whereas photoelectron spectra are less affected for the cases studied; (3) vibrational fine-structures are reduced compared to those of adamantane; (4) the spectroscopic signals of 1- and 2-adamantyl species are significantly different from each other; and (5) reducing the damping factor has only a limited effect on the vibrational fine-structure in most cases. This suggests that removing hydrogen atoms and/or electrons from adamantane leads to new optoelectronic properties, which should be detectable by vibronic spectroscopy. Y1 - 2019 U6 - https://doi.org/10.1021/acs.jpca.9b03305 SN - 1089-5639 SN - 1520-5215 VL - 123 IS - 41 SP - 8871 EP - 8880 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Melani, Giacomo A1 - Nagata, Yuki A1 - Wirth, Jonas A1 - Saalfrank, Peter T1 - Vibrational spectroscopy of hydroxylated alpha-Al2O3(0001) surfaces with and without water BT - an ab initio molecular dynamics study JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - Using gradient- and dispersion-corrected density functional theory in connection with ab initio molecular dynamics and efficient, parametrized Velocity-Velocity Autocorrelation Function (VVAF) methodology, we study the vibrational spectra (Vibrational Sum Frequency, VSF, and infrared, IR) of hydroxylated alpha-Al2O3(0001) surfaces with and without additional water. Specifically, by considering a naked hydroxylated surface and the same surface with a particularly stable, "ice-like" hexagonal water later allows us to identify and disentangle main spectroscopic bands of OH bonds, their orientation and dynamics, and the role of water adsorption. In particular, we assign spectroscopic signals around 3700 cm(-1) as being dominated by perpendicularly oriented non-hydrogen bonded aluminol groups, with and without additional water. Furthermore, the thin water layer gives spectroscopic signals which are already comparable to previous theoretical and experimental findings for the solid/(bulk) liquid interface, showing that water molecules closest to the surface play a decisive role in the vibrational response of these systems. From a methodological point of view, the effects of temperature, anharmonicity, hydrogen-bonding, and structural dynamics are taken into account and analyzed, allowing us to compare the calculated IR and VSF spectra with the ones based on normal mode analysis and vibrational density of states. The VVAF approach employed in this work appears to be a computationally accurate yet feasible method to address the vibrational fingerprints and dynamical properties of water/metal oxide interfaces. Published by AIP Publishing. Y1 - 2018 U6 - https://doi.org/10.1063/1.5023347 SN - 0021-9606 SN - 1089-7690 VL - 149 IS - 1 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Melani, Giacomo A1 - Nagata, Yuki A1 - Campen, Richard Kramer A1 - Saalfrank, Peter T1 - Vibrational spectra of dissociatively adsorbed D2O on Al-terminated alpha-Al2O3(0001) surfaces from ab initio molecular dynamics JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - Water can adsorb molecularly or dissociatively onto different sites of metal oxide surfaces. These adsorption sites can be disentangled using surface-sensitive vibrational spectroscopy. Here, we model Vibrational Sum Frequency (VSF) spectra for various forms of dissociated, deuterated water on a reconstructed, Al-terminated α-Al2O3(0001) surface at submonolayer coverages (the so-called 1-2, 1-4, and 1-4′ modes). Using an efficient scheme based on velocity-velocity autocorrelation functions, we go beyond previous normal mode analyses by including anharmonicity, mode coupling, and thermal surface motion in the framework of ab initio molecular dynamics. In this way, we calculate vibrational density of states curves, infrared, and VSF spectra. Comparing computed VSF spectra with measured ones, we find that relative frequencies of resonances are in quite good agreement and linewidths are reasonably well represented, while VSF intensities coincide not well. We argue that intensities are sensitively affected by local interactions and thermal fluctuations, even at such low coverage, while absolute peak positions strongly depend on the choice of the electronic structure method and on the appropriate inclusion of anharmonicity. Y1 - 2019 U6 - https://doi.org/10.1063/1.5099895 SN - 0021-9606 SN - 1089-7690 VL - 150 IS - 24 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Scholz, Robert A1 - Lindner, Steven A1 - Loncaric, Ivor A1 - Tremblay, Jean Christophe A1 - Juaristi, J. A1 - Alducin, Maite A1 - Saalfrank, Peter T1 - Vibrational response and motion of carbon monoxide on Cu(100) driven by femtosecond laser pulses: Molecular dynamics with electronic friction JF - Physical review : B, Condensed matter and materials physics N2 - Carbon monoxide on copper surfaces continues to be a fascinating, rich microlab for many questions evolving in surface science. Recently, hot-electron mediated, femtosecond-laser pulse induced dynamics of CO molecules on Cu(100) were the focus of experiments [Inoue et al., Phys. Rev. Lett. 117, 186101 (2016)] and theory [Novko et al., Phys. Rev. Lett. 122, 016806 (2019)], unraveling details of the vibrational nonequilibrium dynamics on ultrashort (subpicoseconds) timescales. In the present work, full-dimensional time-resolved hot-electron driven dynamics are studied by molecular dynamics with electronic friction (MDEF). Dissipation is included by a friction term in a Langevin equation which describes the coupling of molecular degrees of freedom to electron-hole pairs in the copper surface, calculated from gradient-corrected density functional theory (DFT) via a local density friction approximation (LDFA). Relaxation due to surface phonons is included by a generalized Langevin oscillator model. The hot-electron induced excitation is described via a time-dependent electronic temperature, the latter derived from an improved two-temperature model. Our parameter-free simulations on a precomputed potential energy surface allow for excellent statistics, and the observed trends are confirmed by on-the-fly ab initio molecular dynamics with electronic friction (AIMDEF) calculations. By computing time-resolved frequency maps for selected molecular vibrations, instantaneous frequencies, probability distributions, and correlation functions, we gain microscopic insight into hot-electron driven dynamics and we can relate the time evolution of vibrational internal CO stretch-mode frequencies to measured data, notably an observed redshift. Quantitatively, the latter is found to be larger in MDEF than in experiment and possible reasons are discussed for this observation. In our model, in addition we observe the excitation and time evolution of large-amplitude low-frequency modes, lateral CO surface diffusion, and molecular desorption. Effects of surface atom motion and of the laser fluence are also discussed. Y1 - 2019 U6 - https://doi.org/10.1103/PhysRevB.100.245431 SN - 2469-9950 SN - 2469-9969 VL - 100 IS - 24 PB - American Physical Society CY - College Park ER - TY - JOUR A1 - Saalfrank, Peter A1 - Juaristi, J. I. A1 - Alducin, Maite A1 - Blanco-Rey, Maria A1 - Muino, R. Diez T1 - Vibrational lifetimes of hydrogen on lead films : an ab initio molecular dynamics with electronic friction (AIMDEF) study JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - Using density functional theory and Ab Initio Molecular Dynamics with Electronic Friction (AIMDEF), we study the adsorption and dissipative vibrational dynamics of hydrogen atoms chemisorbed on free-standing lead films of increasing thickness. Lead films are known for their oscillatory behaviour of certain properties with increasing thickness, e.g., energy and electron spill-out change in discontinuous manner, due to quantum size effects [G. Materzanini, P. Saalfrank, and P.J.D. Lindan, Phys. Rev. B 63, 235405 (2001)]. Here, we demonstrate that oscillatory features arise also for hydrogen when chemisorbed on lead films. Besides stationary properties of the adsorbate, we concentrate on finite vibrational lifetimes of H-surface vibrations. As shown by AIMDEF, the damping via vibration-electron hole pair coupling dominates clearly over the vibration-phonon channel, in particular for high-frequency modes. Vibrational relaxation times are a characteristic function of layer thickness due to the oscillating behaviour of the embedding surface electronic density. Implications derived from AIMDEF for frictional many-atom dynamics, and physisorbed species will also be given. (C) 2014 AIP Publishing LLC. Y1 - 2014 U6 - https://doi.org/10.1063/1.4903309 SN - 0021-9606 SN - 1089-7690 VL - 141 IS - 23 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Melani, Giacomo A1 - Nagata, Yuki A1 - Saalfrank, Peter T1 - Vibrational energy relaxation of interfacial OH on a water-covered alpha-Al2O3(0001) surface BT - a non-equilibrium ab initio molecular dynamics study JF - Physical chemistry, chemical physics : PCCP ; a journal of European chemical societies N2 - Vibrational relaxation of adsorbates is a sensitive tool to probe energy transfer at gas/solid and liquid/solid interfaces. The most direct way to study relaxation dynamics uses time-resolved spectroscopy. Here we report on a non-equilibrium ab initio molecular dynamics (NE-AIMD) methodology to model vibrational relaxation of OH vibrations on a hydroxylated, water-covered alpha-Al2O3(0001) surface. In our NE-AIMD approach, after exciting selected O-H bonds their coupling to surface phonons and to the water adlayer is analyzed in detail, by following both the energy flow in time, as well as the time-evolution of Vibrational Density of States (VDOS) curves. The latter are obtained from Time-dependent Correlation Functions (TCFs) and serve as prototypical, generic representatives of time-resolved vibrational spectra. As most important results, (i) we find a few-picosecond lifetime of the excited modes and (ii) identify both hydrogen-bonded aluminols and water molecules in the adsorbed water layer as main dissipative channels, while the direct coupling to Al2O3 surface phonons is of minor importance on the timescales of interest. Our NE-AIMD/TCF methodology is powerful for complex adsorbate systems, in principle even reacting ones, and opens a way towards time-resolved vibrational spectroscopy. Y1 - 2021 U6 - https://doi.org/10.1039/d0cp03777j SN - 1463-9076 SN - 1463-9084 VL - 23 IS - 13 SP - 7714 EP - 7723 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Kleinpeter, Erich A1 - Shainyan, Bagrat A. T1 - Very low-temperature dynamic Si-29 NMR study of the conformational equilibrium of (1,1-phenyl-1,1-silacyclohex-1-yl)disiloxane T2 - Magnetic resonance in chemistry Y1 - 2019 U6 - https://doi.org/10.1002/mrc.4870 SN - 0749-1581 SN - 1097-458X VL - 57 IS - 6 SP - 317 EP - 319 PB - Wiley CY - Hoboken ER - TY - THES A1 - Hainich, Kerstin T1 - Verwendung von Metallen unter ökologischen Gesichtspunkten - Materialien für den Chemieunterricht und Bereitstellung fachwissenschaftlicher (chemischer) Kenntnisse Y1 - 1992 ER - TY - THES A1 - Rojas Carillo, Oscar Mario T1 - Versatile uses of halogen-free Ionic Liquids for the formulation of non-aqueous microemulsion and synthesis of gold nanoparticles Y1 - 2012 CY - Potsdam ER - TY - JOUR A1 - Duvinage, Brigitte A1 - Müller, Ulrike T1 - Verklappung von Dünnsäure Y1 - 1994 ER - TY - JOUR A1 - Kienzler, Andrea Altevogt Nee A1 - Flehr, Roman A1 - Gehne, Sören A1 - Kumke, Michael Uwe A1 - Bannwarth, Willi T1 - Verification and biophysical characterization of a New Three-Color Forster Resonance-Energy-Transfer (FRET) System in DNA JF - Helvetica chimica acta N2 - We report on a new three-color FRET system consisting of three fluorescent dyes, i.e., of a carbostyril (=quinolin-2(1H)-one)-derived donor D, a (bathophenanthroline)ruthenium complex as a relay chromophore A1, and a Cy dye as A2 (FRET=Forster resonance-energy-transfer) (cf. Fig. 1). With their widely matching spectroscopic properties (cf. Fig. 2), the combination of these dyes yielded excellent FRET efficiencies. Furthermore, fluorescence lifetime measurements revealed that the long fluorescence lifetime of the Ru complex was transferred to the Cy dye offering the possibility to measure the whole system in a time-resolved mode. The FRET system was established on double-stranded DNA (cf. Fig. 3) but it should also be generally applicable to other biomolecules. KW - Forster resonance energy transfer (FRET) system KW - DNA KW - Fluorescence KW - Ruthenium complexes Y1 - 2012 U6 - https://doi.org/10.1002/hlca.201100460 SN - 0018-019X VL - 95 IS - 4 SP - 543 EP - 555 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Küchler, Thoralf T1 - Verhalten von Tensiden und ihre Auswirkungen auf die Mobilität organischer Schadstoffe in sorptionsschwachen Sandböden Y1 - 1995 ER - TY - JOUR A1 - Soyez, Konrad A1 - Baier, Dieter A1 - Costa, A. A1 - Fieback, K. A1 - Gabel, H. A1 - Koller, Matthias A1 - Matthäi, M. A1 - Prause, M. A1 - Reinhold, J. A1 - Sommerfeldt, H. A1 - Tannenberger, K. T1 - Verfahrensentwicklung zur Kopplung von Kompostierung und Gewächshausproduktion Y1 - 1995 ER - TY - JOUR A1 - Soyez, Konrad A1 - Prause, M. A1 - Tannenberger, K. A1 - Costa, A. T1 - Verfahrensentwicklung zur Kopplung von Kompostierung und Gewächshausproduktion Y1 - 1994 ER - TY - JOUR A1 - Shainyan, Bagrat A. A1 - Ushakov, Igor A. A1 - Meshcheryakov, Vladimir I. A1 - Koch, Andreas A1 - Kleinpeter, Erich T1 - Variable temperature NMR and theoretical study of the stereodynamics of 5-trifluoromethylsulfonyl-1,3,5- dioxaazinane : Perlin effect subject to heteroatom substitution N2 - Multinuclear dynamic NMR spectroscopy of 5-trifluoromethylsulfonyl-1,3,5-dioxaazinane (4) revealed the existence of two close in energy chair conformers with differently oriented CF3 groups with respect to the ring. Of the two alternative routes for their interconversion, the ring inversion path with intermediate formation of the corresponding 2,5-twist-conformer is preferred, with the energy barrier of 11.2 kcal/mol in excellent agreement with the experimental value (11.7 kcal/mol). The Perlin effect is studied experimentally and calculated theoretically for all CH2 groups and found to be subject to the nature of the adjacent heteroatoms O and N, respectively. Y1 - 2008 ER - TY - JOUR A1 - Zude-Sasse, Manuela A1 - Hashim, Norhashila A1 - Hass, Roland A1 - Polley, Nabarun A1 - Regen, Christian T1 - Validation study for measuring absorption and reduced scattering coefficients by means of laser-induced backscattering imaging JF - Postharvest Biology and Technology N2 - Decoupling of optical properties appears challenging, but vital to get better insight of the relationship between light and fruit attributes. In this study, nine solid phantoms capturing the ranges of absorption (μa) and reduced scattering (μs’) coefficients in fruit were analysed non-destructively using laser-induced backscattering imaging (LLBI) at 1060 nm. Data analysis of LLBI was carried out on the diffuse reflectance, attenuation profile obtained by means of Farrell’s diffusion theory either calculating μa [cm−1] and μs’ [cm−1] in one fitting step or fitting only one optical variable and providing the other one from a destructive analysis. The nondestructive approach was approved when calculating one unknown coefficient non-destructively, while no ability of the method was found to analysis both, μa and μs’, non-destructively. Setting μs’ according to destructive photon density wave (PDW) spectroscopy and fitting μa resulted in root mean square error (rmse) of 18.7% in comparison to fitting μs’ resulting in rmse of 2.6%, pointing to decreased measuring uncertainty, when the highly variable μa was known. The approach was tested on European pear, utilizing destructive PDW spectroscopy for setting one variable, while LLBI was applied for calculating the remaining coefficient. Results indicated that the optical properties of pear obtained from PDW spectroscopy as well as LLBI changed concurrently in correspondence to water content mainly. A destructive batch-wise analysis of μs’ and online analysis of μa may be considered in future developments for improved fruit sorting results, when considering fruit with high variability of μs’. KW - Absorption KW - European pear KW - Fruit quality KW - Phantoms KW - Reduced scattering coefficient KW - Scattering KW - Spatially resolved spectroscopy Y1 - 2019 U6 - https://doi.org/10.1016/j.postharvbio.2019.04.002 SN - 0925-5214 SN - 1873-2356 VL - 153 SP - 161 EP - 168 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Vogel, Stefanie A1 - Ebel, Kenny A1 - Heck, Christian A1 - Schürmann, Robin Mathis A1 - Milosavljevic, Aleksandar R. A1 - Giuliani, Alexandre A1 - Bald, Ilko T1 - Vacuum-UV induced DNA strand breaks BT - influence of the radiosensitizers 5-bromouracil and 8-bromoadenine JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Radiation therapy is a basic part of cancer treatment. To increase the DNA damage in carcinogenic cells and preserve healthy tissue at the same time, radiosensitizing molecules such as halogenated nucleobase analogs can be incorporated into the DNA during the cell reproduction cycle. In the present study 8.44 eV photon irradiation induced single strand breaks (SSB) in DNA sequences modified with the radiosensitizer 5-bromouracil (U-5Br) and 8-bromoadenine ((8Br)A) are investigated. U-5Br was incorporated in the 13mer oligonucleotide flanked by different nucleobases. It was demonstrated that the highest SSB cross sections were reached, when cytosine and thymine were adjacent to U-5Br, whereas guanine as a neighboring nucleobase decreases the activity of U-5Br indicating that competing reaction mechanisms are active. This was further investigated with respect to the distance of guanine to U-5Br separated by an increasing number of adenine nucleotides. It was observed that the SSB cross sections were decreasing with an increasing number of adenine spacers between guanine and U-5Br until the SSB cross sections almost reached the level of a non-modified DNA sequence, which demonstrates the high sequence dependence of the sensitizing effect of U-5Br. (8Br)A was incorporated in a 13mer oligonucleotide as well and the strand breaks were quantified upon 8.44 eV photon irradiation in direct comparison to a non-modified DNA sequence of the same composition. No clear enhancement of the SSB yield of the modified in comparison to the non-modified DNA sequence could be observed. Additionally, secondary electrons with a maximum energy of 3.6 eV were generated when using Si as a substrate giving rise to further DNA damage. A clear enhancement in the SSB yield can be ascertained, but to the same degree for both the non-modified DNA sequence and the DNA sequence modified with (8Br)A. Y1 - 2019 U6 - https://doi.org/10.1039/c8cp06813e SN - 1463-9076 SN - 1463-9084 VL - 21 IS - 4 SP - 1972 EP - 1979 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Vogel, Stefanie A1 - Ebel, Kenny A1 - Schürmann, Robin Mathis A1 - Heck, Christian A1 - Meiling, Till A1 - Milosavljevic, Aleksandar R. A1 - Giuliani, Alexandre A1 - Bald, Ilko T1 - Vacuum-UV and Low-Energy Electron-Induced DNA Strand Breaks BT - Influence of the DNA Sequence and Substrate JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - DNA is effectively damaged by radiation, which can on the one hand lead to cancer and is on the other hand directly exploited in the treatment of tumor tissue. DNA strand breaks are already induced by photons having an energy below the ionization energy of DNA. At high photon energies, most of the DNA strand breaks are induced by low-energy secondary electrons. In the present study we quantified photon and electron induced DNA strand breaks in four different 12mer oligonucleotides. They are irradiated directly with 8.44 eV vacuum ultraviolet (VUV) photons and 8.8 eV low energy electrons (LEE). By using Si instead of VUV transparent CaF2 as a substrate the VUV exposure leads to an additional release of LEEs, which have a maximum energy of 3.6 eV and can significantly enhance strand break cross sections. Atomic force microscopy is used to visualize strand breaks on DNA origami platforms and to determine absolute values for the strand break cross sections. Upon irradiation with 8.44 eV photons all the investigated sequences show very similar strand break cross sections in the range of 1.7-2.3x10(-16) cm(2). The strand break cross sections for LEE irradiation at 8.8 eV are one to two orders of magnitude larger than the ones for VUV photons, and a slight sequence dependence is observed. The sequence dependence is even more pronounced for LEEs with energies <3.6 eV. The present results help to assess DNA damage by photons and electrons close to the ionization threshold. KW - DNA origami KW - DNA radiation damage KW - DNA strand breaks KW - low-energy electrons KW - vacuum-UV radiation Y1 - 2019 U6 - https://doi.org/10.1002/cphc.201801152 SN - 1439-4235 SN - 1439-7641 VL - 20 IS - 6 SP - 823 EP - 830 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Zhong, Qi A1 - Metwalli, Ezzeldin A1 - Rawolle, Monika A1 - Kaune, Gunar A1 - Bivigou Koumba, Achille Mayelle A1 - Laschewsky, Andre A1 - Papadakis, Christine M. A1 - Cubitt, Robert A1 - Wang, Jiping A1 - Müller-Buschbaum, Peter T1 - Vacuum induced dehydration of swollen poly(methoxy diethylene glycol acrylate) and polystyrene-block-poly(methoxy diethylene glycol acrylate)-block-polystyrene films probed by in-situ neutron reflectivity JF - Polymer : the international journal for the science and technology of polymers N2 - The isothermal vacuum-induced dehydration of thin films made of poly(methoxy diethylene glycol acrylate) (PMDEGA), which were swollen under ambient conditions, is studied. The dehydration behavior of the homopolymer film as well as of a nanostructured film of the amphiphilic triblock copolymer polystyrene-block-poly(methoxy diethylene glycol acrylate)-block-polystyrene, abbreviated as PS-b-PMDEGA-b-PS, are probed, and compared to the thermally induced dehydration behavior of such thin thermo-responsive films when they pass through their LCST-type coil-to globule collapse transition. The dehydration kinetics is followed by in-situ neutron reflectivity measurements. Contrast results from the use of deuterated water. Water content and film thickness are significantly reduced during the process, which can be explained by Schott second order kinetics theory for both films. The water content of the dehydrated equilibrium state from this model is very close to the residual water content obtained from the final static measurements, indicating that residual water still remains in the film even after prolonged exposure to the vacuum. In the PS-b-PMDEGA-b-PS film that shows micro-phase separation, the hydrophobic PS domains modify the dehydration process by hindering the water removal, and thus retarding dehydration by about 30%. Whereas residual water remains tightly bound in the PMDEGA domains, water is completely removed from the PS domains of the block copolymer film. (C) 2017 Elsevier Ltd. All rights reserved. KW - Dehydration KW - Vacuum drying KW - In-situ neutron reflectivity Y1 - 2017 U6 - https://doi.org/10.1016/j.polymer.2017.07.066 SN - 0032-3861 SN - 1873-2291 VL - 124 SP - 263 EP - 273 PB - Elsevier CY - Oxford ER - TY - THES A1 - Kumru, Baris T1 - Utilization of graphitic carbon nitride in dispersed media T1 - Anwendung von graphitischem Kohlenstoffnitrid in dispergierten Medien N2 - Utilization of sunlight for energy harvesting has been foreseen as sustainable replacement for fossil fuels, which would also eliminate side effects arising from fossil fuel consumption such as drastic increase of CO2 in Earth atmosphere. Semiconductor materials can be implemented for energy harvesting, and design of ideal energy harvesting devices relies on effective semiconductor with low recombination rate, ease of processing, stability over long period, non-toxicity and synthesis from abundant sources. Aforementioned criteria have attracted broad interest for graphitic carbon nitride (g-CN) materials, metal-free semiconductor which can be synthesized from low cost and abundant precursors. Furthermore, physical properties such as band gap, surface area and absorption can be tuned. g-CN was investigated as heterogeneous catalyst, with diversified applications from water splitting to CO2 reduction and organic coupling reactions. However, low dispersibility of g-CN in water and organic solvents was an obstacle for future improvements. Tissue engineering aims to mimic natural tissues mechanically and biologically, so that synthetic materials can replace natural ones in future. Hydrogels are crosslinked networks with high water content, therefore are prime candidates for tissue engineering. However, the first requirement is synthesis of hydrogels with mechanical properties that are matching to natural tissues. Among different approaches for reinforcement, nanocomposite reinforcement is highly promising. This thesis aims to investigate aqueous and organic dispersions of g-CN materials. Aqueous g-CN dispersions were utilized for visible light induced hydrogel synthesis, where g-CN acts as reinforcer and photoinitiator. Varieties of methodologies were presented for enhancing g-CN dispersibility, from co-solvent method to prepolymer formation, and it was shown that hydrogels with diversified mechanical properties (from skin-like to cartilage-like) are accessible via g-CN utilization. One pot photografting method was introduced for functionalization of g-CN surface which provides functional groups towards enhanced dispersibility in aqueous and organic media. Grafting vinyl thiazole groups yields stable additive-free organodispersions of g-CN which are electrostatically stabilized with increased photophysical properties. Colloidal stability of organic systems provides transparent g-CN coatings and printing g-CN from commercial inkjet printers. Overall, application of g-CN in dispersed media is highly promising, and variety of materials can be accessible via utilization of g-CN and visible light with simple chemicals and synthetic conditions. g-CN in dispersed media will bridge emerging research areas from tissue engineering to energy harvesting in near future. N2 - Sonnenlicht kann fossile Brennstoffe in der Energieerzeugung ersetzen und ermöglicht neben der Nutzung einer nachhaltigen Ressource dabei auch die deutliche Reduktion der Umweltbelastung in der Energieerzeugung. Die Verfügbarkeit geeigneter Energiegewinnungstechnologien hängt entscheidend von der Verfügbarkeit geeigneter Superkondensatoren (SC) ab. Ideale SC sollten sich in diesem Zusammenhang durch eine geringe Rekombinationsrate, gute Verarbeitbarkeit, Langzeitstabilität, Ungiftigkeit und die Verfügbarkeit aus nachhaltigen Ressourcen auszeichnen. Graphitisches Kohlenstoffnitrid (graphitic carbon nitride – g-CN), ein metall-freier Halbleiter, der aus nachhaltigen und in großer Menge verfügbaren Ausgangsstoffen hergestellt werden kann, ist als Material für dieses Eigenschaftsprofil hervorragend geeignet. Darüber hinaus können die Eigenschaften dieses Materials (innere Oberfläche, Bandlücke, Lichtabsorption) eingestellt werden. Daraus ergibt sich ein großes Forschungsinteresse z.B. im Bereich heterogener Katalyse, wie in der Kohlenstoffdioxidreduktion, elektrolytischen Wasserspaltung und verschiedener organischer Kupplungsreaktionen. Unglücklicherweise ist die schlechte Dispergierbarkeit von g-CN in organischen Lösungsmitteln und Wasser ein wesentlicher Hinderungsgrund für die erfolgreiche Nutzbarmachung dieser hervorragenden Eigenschaften. Das Design von Materialien, die biologisches Gewebe in seinen mechanischen und biologischen Eigenschaften nachahmen und ersetzen können, ist das Ziel der Gewebekonstruktion (Tissue Engineering – TE). Hydrogele, also Netzwerke mit hohem Wassergehalt, gelten als die vielversprechendsten Materialen in diesem Forschungsfeld. Die Herstellung von Hydrogelen, die biologischem Gewebe in seinen mechanischen Eigenschaften ähnelt gilt allerdings als äußerst schwierig und erfordert die Stabilisierung der Netzwerke. Besonders der Einsatz von Nanoverbundstrukturen (nanocomposites) erscheint in diesem Zusammenhang vielversprechend. Die vorliegende Arbeit beschäftigt sich mit der Untersuchung von g-CN in sowohl wässrigen, als auch organischen Dispersionen. Im Zuge dessen werden wässrige Dispersionen für die Synthese von Hydrogelen, bei der g-CN sowohl als Photoinitiator für die durch sichtbares Licht ausgelöste Vernetzung, als auch als Strukturverstärker fungiert. Zur Verbesserung der Dispergierbarkeit des g CN werden vielseitige Ansätze präsentiert, welche von der Verwendung von Co-Lösungsmitteln bis zur Präpolymerbildung reichen. Durch die aufgezeigten Ansätze können Hydrogele mit unterschiedlichen mechanischen Eigenschaften hergestellt werden (hautartig bis knorpelig). Darüber hinaus wird eine Ein-Topf Synthese für die Oberflächenfunktionalisierung vorgestellt, durch die die Dispergierbarkeit von g-CN in organischen und wässrigen Medien verbessert werden kann. Beispielsweise erlaubt die Oberflächenfunktionalisierung mit Vinylthiazol die Herstellung von kolloidal dispergiertem g-CN mit verbesserten photophysikalischen Eigenschaften ohne zusätzliche Additive und eröffnet damit die Möglichkeit transparenter g-CN Beschichtungen und ermöglicht die Druckbarkeit von g-CN aus handelsüblichen Tintenstrahldruckern. Die Anwendung von g-CN in dispergierten Medien ist vielversprechend, da eine große Zahl sehr vielfältiger Materialien durch die Kombination von g-CN mit sichtbarem Licht aus günstigen, nachhaltigen Ressourcen verfügbar ist. Daher ist zu erwarten, dass g-CN in dispergierten Medien verschiedene im Entstehen begriffene Forschungsfelder von TE bis zur Energiegewinnung überspannen wird. KW - polymer chemistry KW - Polymerchemie KW - photochemistry KW - Photochemie KW - colloid chemistry KW - kolloidchemie KW - hydrogels KW - Hydrogelen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427339 ER -