TY - GEN A1 - Zwieback, Simon A1 - Kokelj, Steven V. A1 - Günther, Frank A1 - Boike, Julia A1 - Grosse, Guido A1 - Hajnsek, Irena T1 - Sub-seasonal thaw slump mass wasting is not consistently energy limited at the landscape scale T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Predicting future thaw slump activity requires a sound understanding of the atmospheric drivers and geomorphic controls on mass wasting across a range of timescales. On sub-seasonal timescales, sparse measurements indicate that mass wasting at active slumps is often limited by the energy available for melting ground ice, but other factors such as rainfall or the formation of an insulating veneer may also be relevant. To study the sub-seasonal drivers, we derive topographic changes from single-pass radar interferometric data acquired by the TanDEM-X satellites. The estimated elevation changes at 12m resolution complement the commonly observed planimetric retreat rates by providing information on volume losses. Their high vertical precision (around 30 cm), frequent observations (11 days) and large coverage (5000 km(2)) allow us to track mass wasting as drivers such as the available energy change during the summer of 2015 in two study regions. We find that thaw slumps in the Tuktoyaktuk coastlands, Canada, are not energy limited in June, as they undergo limited mass wasting (height loss of around 0 cm day 1) despite the ample available energy, suggesting the widespread presence of early season insulating snow or debris veneer. Later in summer, height losses generally increase (around 3 cm day 1), but they do so in distinct ways. For many slumps, mass wasting tracks the available energy, a temporal pattern that is also observed at coastal yedoma cliffs on the Bykovsky Peninsula, Russia. However, the other two common temporal trajectories are asynchronous with the available energy, as they track strong precipitation events or show a sudden speed-up in late August respectively. The observed temporal patterns are poorly related to slump characteristics like the headwall height. The contrasting temporal behaviour of nearby thaw slumps highlights the importance of complex local and temporally varying controls on mass wasting. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 926 KW - ground-ice KW - Tandem-X KW - Northeast Siberia KW - thermal regime KW - Peel Plateau KW - permafrost KW - erosion KW - Island KW - delta KW - yedoma Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-445688 SN - 1866-8372 IS - 926 SP - 549 EP - 564 ER - TY - THES A1 - Wulf, Hendrik T1 - Seasonal precipitation, river discharge, and sediment flux in the western Himalaya T1 - Saisonaler Niederschlag, Wasserabfluss und Sedimentationsfluss im westlichen Himalaya N2 - Rainfall, snow-, and glacial melt throughout the Himalaya control river discharge, which is vital for maintaining agriculture, drinking water and hydropower generation. However, the spatiotemporal contribution of these discharge components to Himalayan rivers is not well understood, mainly because of the scarcity of ground-based observations. Consequently, there is also little known about the triggers and sources of peak sediment flux events, which account for extensive hydropower reservoir filling and turbine abrasion. We therefore lack basic information on the distribution of water resources and controls of erosion processes. In this thesis, I employ various methods to assess and quantify general characteristics of and links between precipitation, river discharge, and sediment flux in the Sutlej Valley. First, I analyze daily precipitation data (1998-2007) from 80 weather stations in the western Himalaya, to decipher the distribution of rain- and snowfall. Rainfall magnitude frequency analyses indicate that 40% of the summer rainfall budget is attributed to monsoonal rainstorms, which show higher variability in the orogenic interior than in frontal regions. Combined analysis of rainstorms and sediment flux data of a major Sutlej River tributary indicate that monsoonal rainfall has a first order control on erosion processes in the orogenic interior, despite the dominance of snowfall in this region. Second, I examine the contribution of rainfall, snow and glacial melt to river discharge in the Sutlej Valley (s55,000 km2), based on a distributed hydrological model, which covers the period 2000-2008. To achieve high spatial and daily resolution despite limited ground-based observations the hydrological model is forced by daily remote sensing data, which I adjusted and calibrated with ground station data. The calibration shows that the Tropical Rainfall Measuring Mission (TRMM) 3B42 rainfall product systematically overestimates rainfall in semi-arid and arid regions, increasing with aridity. The model results indicate that snowmelt-derived discharge (74%) is most important during the pre-monsoon season (April to June) whereas rainfall (56%) and glacial melt (17%) dominate the monsoon season (July-September). Therefore, climate change most likely causes a reduction in river discharge during the pre-monsoon season, which especially affects the orogenic interior. Third, I investigate the controls on suspended sediment flux in different parts of the Sutlej catchments, based on daily gauging data from the past decade. In conjunction with meteorological data, earthquake records, and rock strength measurements I find that rainstorms are the most frequent trigger of high-discharge events with peaks in suspended sediment concentrations (SSC) that account for the bulk of the suspended sediment flux. The suspended sediment flux increases downstream, mainly due to increases in runoff. Pronounced erosion along the Himalayan Front occurs throughout the monsoon season, whereas efficient erosion of the orogenic interior is confined to single extreme events. The results of this thesis highlight the importance of snow and glacially derived melt waters in the western Himalaya, where extensive regions receive only limited amounts of monsoonal rainfall. These regions are therefore particularly susceptible to global warming with major implications on the hydrological cycle. However, the sediment discharge data show that infrequent monsoonal rainstorms that pass the orographic barrier of the Higher Himalaya are still the primary trigger of the highest-impact erosion events, despite being subordinate to snow and glacially–derived discharge. These findings may help to predict peak sediment flux events and could underpin the strategic development of preventative measures for hydropower infrastructures. N2 - Regen, Schnee- und Gletscherschmelze speisen die Flüsse des Himalajas, die eine große Bedeutung für die Landwirtschaft, Trinkwasserversorgung und Wasserkraftnutzung in Südasien aufweisen. Welchen Anteil die einzelnen Abflusskomponenten am Gesamtabfluss in Raum und Zeit besitzen, ist jedoch kaum quantifiziert, da es in der entlegenen Region an Bodenmessstationen mangelt. Aus diesem Grund ist auch wenig über die Auslöser und Herkunftsgebiete von hohen Sedimentaustragsereignissen bekannt, die im erheblichen Maße dazu beitragen, dass die Kapazität vonWasserkraftreservoiren abnimmt undWasserkraftturbinen abradieren. Daher fehlen bisher grundlegende Informationen zur räumlichen Verteilung von Wasserressourcen und zu den Ursachen von Erosionsprozessen. In dieser Arbeit benutze ich verschiedene Methoden um die Eigenschaften von und die Beziehungen zwischen Niederschlag, Abflussmenge und Sedimentaustrag im Sutlej-Tal zu untersuchen. In einer ersten Studie analysiere ich Tagesniederschläge (1998-2007) von 80 Wetterstationen aus dem westlichen Himalaja, um die räumliche Verteilung von Regen- und Schneeniederschlägen zu charakterisieren. Die weitere Analyse der Magnituden-Häufigkeitsverteilung von Regenfällen zeigt, dass 40% der sommerlichen Niederschläge auf monsunale Starkregenereignisse zurückgehen, die eine höhere Variabilität im Gebirgsinneren aufweisen als an der Gebirgsfront. Die Kombination von Niederschlagsdaten mit Sedimentaustragsdaten für einen der größten Zuflüsse des Sutlejs zeigt, dass monsunaler Niederschlag der primäre Auslöser von Erosionsprozessen im Gebirgsinneren ist, ungeachtet größerer Abflussmengen durch Schnee- und Gletscherschmelze. In einer zweiten Studie untersuche ich den Beitrag von Regen, Schnee- und Gletscherschmelze zur Abflussmenge im Sutlej-Tal (s55.000 km2) mit Hilfe eines hydrologischen Modells für den Jahreszeitraum 2000-2008. Um trotz der begrenzten Bodenmessungen eine hohe räumliche und zeitliche Auflösung zu erzielen, basiert das Modell auf täglichen Fernerkundungsdaten, die ich mit allen verfügbaren Bodenstationsdaten kalibriert und an diese angepasst habe. Die Kalibrierung zeigt, dass das Regenniederschlagsprodukt 3B42 der „Tropical Rainfall Measuring Mission“ (TRMM) den Bodenniederschlag in den semi-ariden bis ariden Gebirgsregionen mit zunehmender Trockenheit systematisch überschätzt. Die Modellierungsergebnisse verdeutlichen, dass die Schneeschmelze den bedeutendsten Beitrag zur Abflussmenge (74 %) zwischen April und Juni aufbringt, während Regen (56%) und Gletscherschmelze (17%) die Monsunsaison (Juli-September) prägen. Daher ist anzunehmen, dass der Klimawandel zu einer Verringerung der Abflussmenge zwischen April und Juni führen wird, was sich besonders auf das Gebirgsinnere auswirkt. In einer dritten Studie untersuche ich mit Hilfe von täglichen Messdaten der letzten Dekade die Ursachen und Eigenschaften des Sedimentaustrags in verschiedenen Bereichen des Sutlej-Einzugsgebietes. Auf der Grundlage von meteorologischen Daten, Erdbebenaufzeichnungen und Gesteinsfestigkeitsmessungen identifiziere ich Starkregenereignisse als häufigste Ursache für extreme Erosionsereignisse, die einen Großteil des gesamten Sedimentaustrags ausmachen. Großräumig betrachtet nimmt der Sedimentaustrag flussabwärts zu, was hauptsächlich auf den Anstieg der Abflussmenge zurückzuführen ist. Zur Monsunzeit treten Erosionsprozesse entlang der Himalajafront besonders häufig auf, während im Gebirgsinneren die Erosion auf einzelne Extremereignisse beschränkt ist. Die Ergebnisse dieser Arbeit untersteichen die Bedeutung von Schnee- und Gletscherschmelze im westlichen Himalaja, in dem große Gebiete nur vereinzelt von monsunalen Niederschlägen erreicht werden. Diese Gebiete sind daher besonders anfällig für den Klimawandel mit weitreichenden Konsequenzen für den Wasserhaushalt in der Region. Die Analyse von Sedimentaustragsdaten zeigt jedoch, dass vereinzelte monsunale Regenstürme, welche die topographische Barriere des Himalaja überqueren, die primäre Ursache von extremen Erosionsereignissen sind, trotz der größeren Abflussmengen von Schnee- und Gletscherschmelze im Gebirgsinneren. Diese Ergebnisse können dazu beitragen, große Erosionsereignisse vorherzusagen und vorbeugende Maßnahmen zum Schutz von Wasserkraftanlagen zu entwickeln. KW - Klimawandel KW - Erosion KW - Monsun KW - Regensturm KW - Suspendsionsfracht KW - climate change KW - erosion KW - monsoon KW - rainstorm KW - suspended sediment Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-57905 ER - TY - JOUR A1 - Wehrhan, Marc A1 - Sommer, Michael T1 - A parsimonious approach to estimate soil organic carbon applying Unmanned Aerial System (UAS) multispectral imagery and the topographic position index in a heterogeneous soil landscape JF - Remote sensing / Molecular Diversity Preservation International (MDPI) N2 - Remote sensing plays an increasingly key role in the determination of soil organic carbon (SOC) stored in agriculturally managed topsoils at the regional and field scales. Contemporary Unmanned Aerial Systems (UAS) carrying low-cost and lightweight multispectral sensors provide high spatial resolution imagery (<10 cm). These capabilities allow integrate of UAS-derived soil data and maps into digitalized workflows for sustainable agriculture. However, the common situation of scarce soil data at field scale might be an obstacle for accurate digital soil mapping. In our case study we tested a fixed-wing UAS equipped with visible and near infrared (VIS-NIR) sensors to estimate topsoil SOC distribution at two fields under the constraint of limited sampling points, which were selected by pedological knowledge. They represent all releva nt soil types along an erosion-deposition gradient; hence, the full feature space in terms of topsoils' SOC status. We included the Topographic Position Index (TPI) as a co-variate for SOC prediction. Our study was performed in a soil landscape of hummocky ground moraines, which represent a significant of global arable land. Herein, small scale soil variability is mainly driven by tillage erosion which, in turn, is strongly dependent on topography. Relationships between SOC, TPI and spectral information were tested by Multiple Linear Regression (MLR) using: (i) single field data (local approach) and (ii) data from both fields (pooled approach). The highest prediction performance determined by a leave-one-out-cross-validation (LOOCV) was obtained for the models using the reflectance at 570 nm in conjunction with the TPI as explanatory variables for the local approach (coefficient of determination (R-2) = 0.91; root mean square error (RMSE) = 0.11% and R-2 = 0.48; RMSE = 0.33, respectively). The local MLR models developed with both reflectance and TPI using values from all points showed high correlations and low prediction errors for SOC content (R-2 = 0.88, RMSE = 0.07%; R-2 = 0.79, RMSE = 0.06%, respectively). The comparison with an enlarged dataset consisting of all points from both fields (pooled approach) showed no improvement of the prediction accuracy but yielded decreased prediction errors. Lastly, the local MLR models were applied to the data of the respective other field to evaluate the cross-field prediction ability. The spatial SOC pattern generally remains unaffected on both fields; differences, however, occur concerning the predicted SOC level. Our results indicate a high potential of the combination of UAS-based remote sensing and environmental covariates, such as terrain attributes, for the prediction of topsoil SOC content at the field scale. The temporal flexibility of UAS offer the opportunity to optimize flight conditions including weather and soil surface status (plant cover or residuals, moisture and roughness) which, otherwise, might obscure the relationship between spectral data and SOC content. Pedologically targeted selection of soil samples for model development appears to be the key for an efficient and effective prediction even with a small dataset. KW - Unmanned Aerial System (UAS) KW - multispectral KW - Topographic Position Index KW - (TPI) KW - Multiple Linear Regression (MLR) KW - soil organic carbon (SOC) KW - agriculture KW - erosion KW - soil landscape KW - hummocky ground moraine Y1 - 2021 U6 - https://doi.org/10.3390/rs13183557 SN - 2072-4292 VL - 13 IS - 18 PB - MDPI CY - Basel ER - TY - THES A1 - Weege, Stefanie T1 - Climatic drivers of retrogressive thaw slump activity and resulting sediment and carbon release to the nearshore zone of Herschel Island, Yukon Territory, Canada T1 - Einfluss des Klimas auf das Auftauen einer rückschreitenden Erosionsfront und die daraus resultierende Sediment- und Kohlenstofffreigabe in den Küstenbereich von Herschel Island, Kanada N2 - The Yukon Coast in Canada is an ice-rich permafrost coast and highly sensitive to changing environmental conditions. Retrogressive thaw slumps are a common thermoerosion feature along this coast, and develop through the thawing of exposed ice-rich permafrost on slopes and removal of accumulating debris. They contribute large amounts of sediment, including organic carbon and nitrogen, to the nearshore zone. The objective of this study was to 1) identify the climatic and geomorphological drivers of sediment-meltwater release, 2) quantify the amount of released meltwater, sediment, organic carbon and nitrogen, and 3) project the evolution of sediment-meltwater release of retrogressive thaw slumps in a changing future climate. The analysis is based on data collected over 18 days in July 2013 and 18 days in August 2012. A cut-throat flume was set up in the main sediment-meltwater channel of the largest retrogressive thaw slump on Herschel Island. In addition, two weather stations, one on top of the undisturbed tundra and one on the slump floor, measured incoming solar radiation, air temperature, wind speed and precipitation. The discharge volume eroding from the ice-rich permafrost and retreating snowbanks was measured and compared to the meteorological data collected in real time with a resolution of one minute. The results show that the release of sediment-meltwater from thawing of the ice-rich permafrost headwall is strongly related to snowmelt, incoming solar radiation and air temperature. Snowmelt led to seasonal differences, especially due to the additional contribution of water to the eroding sediment-meltwater from headwall ablation, lead to dilution of the sediment-meltwater composition. Incoming solar radiation and air temperature were the main drivers for diurnal and inter-diurnal fluctuations. In July (2013), the retrogressive thaw slump released about 25 000 m³ of sediment-meltwater, containing 225 kg dissolved organic carbon and 2050 t of sediment, which in turn included 33 t organic carbon, and 4 t total nitrogen. In August (2012), just 15 600 m³ of sediment-meltwater was released, since there was no additional contribution from snowmelt. However, even without the additional dilution, 281 kg dissolved organic carbon was released. The sediment concentration was twice as high as in July, with sediment contents of up to 457 g l-1 and 3058 t of sediment, including 53 t organic carbon and 5 t nitrogen, being released. In addition, the data from the 36 days of observations from Slump D were upscaled to cover the main summer season of 1 July to 31 August (62 days) and to include all 229 active retrogressive thaw slumps along the Yukon Coast. In total, all retrogressive thaw slumps along the Yukon Coast contribute a minimum of 1.4 Mio. m³ sediment-meltwater each thawing season, containing a minimum of 172 000 t sediment with 3119 t organic carbon, 327 t nitrogen and 17 t dissolved organic carbon. Therefore, in addition to the coastal erosion input to the Beaufort Sea, retrogressive thaw slumps additionally release 3 % of sediment and 8 % of organic carbon into the ocean. Finally, the future evolution of retrogressive thaw slumps under a warming scenario with summer air temperatures increasing by 2-3 °C by 2081-2100, would lead to an increase of 109-114% in release of sediment-meltwater. It can be concluded that retrogressive thaw slumps are sensitive to climatic conditions and under projected future Arctic warming will contribute larger amounts of thawed permafrost material (including organic carbon and nitrogen) into the environment. N2 - Die Yukon Küste in Kanada ist eine eisreiche Permafrost Küste und reagiert hoch sensibel auf verändernde Umweltbedingungen. Rückschreitende auftaubedingte Rutschungen sind vielzählig entlang der Küste und entstehen, wenn exponierter eisreicher Permafrost an Hängen auftaut und der daraus resultierende Schlamm abtransportiert wird. Diese Rutschungen tragen große Mengen von Sediment, inklusive organischen Kohlenstoff und Stickstoff, in den küstennahen Bereich. Das Ziel dieser Studie war 1) die klimatischen und geomorphologischen Antriebskräfte für die Freisetzung von Sediment-Schmelzwasser zu identifizieren 2) die Mengen an Schmelzwasser, Sediment, organischen Kohlenstoff und Stickstoff zu quantifizieren und 3) die Entwicklung der Sediment-Schmelzwasser-Freigabe von rückschreitenden Rutschungen unter zukünftigen klimatischen Veränderungen abzuschätzen. Die größte rückschreitende Rutschung auf Herschel Island wird als „Slump D“ bezeichnet und steht im Fokus dieser Arbeit. Die Analysen basierten auf den Daten, die über 18 Tage im Juli (2013) und 18 Tage im August (2012) erhoben wurden. Eine Abfluss-Messrinne wurde in den Haupt-Sediment-Schmelzwasser-Kanal eingebaut, um die Sediment-Schmelzwassermassen zu erfassen. Zusätzlich wurden zwei Wetterstationen aufgebaut (auf der unberührten Tundra und innerhalb der Erosionsfläche), die Sonneneinstrahlung, Lufttemperatur, Windgeschwindigkeit und Niederschlagsmenge aufzeichneten. Das Abflussvolumen, das vom auftauenden, eisreichen Permafrost und den schmelzenden Schneebänken ablief, wurde gemessen und mit den meteorologischen Daten in Echtzeit mit einer Auflösung von einer Minute verglichen. Die Ergebnisse zeigen, dass eine Freigabe von Sediment-Schmelzwasser beim Auftauen der eisreichen Permafrost-Steilklippe stark von Schneeschmelze, Sonneneinstrahlung und Lufttemperatur abhängen. Die Schneeschmelze führt zu saisonalen Unterschieden, besonders durch den zusätzlichen Betrag von Wasser zu dem erodierenden Sediment-Schmelzwasser der auftauenden Steilklippe. Dies führt zu einer Verdünnung des Sediment-Schmelzwassers. Sonneneinstrahlung und Lufttemperaturen waren die Hauptantriebskräfte für die Schwankungen im Tagesverlauf und die Unterschiede zwischen den Tagen. Die rückschreitende Rutschung gab im Juli (2013) ungefähr 25 000 m³ Sediment-Schmelzwasser frei, welches 225 kg gelösten organischen Kohlenstoff, 2050 t Sediment, inklusive 33 t organischen Kohlenstoff und 4 t Stickstoff enthielt. Im August (2012) fehlte der zusätzliche Eintrag der Schneeschmelze und das Sediment-Schmelzwasser-Volumen war geringer mit 15 600 m³. Dennoch, ohne die zusätzliche Verdünnung, wurden 281 kg gelöster organischer Kohlenstoff freigesetzt. Die Sedimentkonzentration war doppelt so hoch und führte zu einem Sedimentgehalt mit bis zu 457 g l-1 zu 3058 t Sediment, inklusive 53 t organischen Kohlenstoff und 5 t Stickstoff. Zusätzlich wurden die Daten der 36-tägigen Abflussmessung der rückschreitenden Rutschung auf 62 Tage, von 1. Juli bis 31. August auf alle 229 aktiven Rutschungen entlang der Yukon Küste hochgerechnet. Es wurde diskutiert, dass alle rückschreitenden Rutschungen entlang der Yukon Küste zusammen mindestens 1,4 Mio. m³ Sediment-Schmelzwasser während jeder Auftausaison freigeben. Diese enthalten ein Minimum von 172 000 t Sediment, 3119 t organischen Kohlenstoff, 327 t Stickstoff und 17 t gelösten organischen Kohlenstoff. Daher kann zusammengefasst werden, dass zusätzlich zur Küstenerosion von allen Rutschungen noch ein zusätzlicher Beitrag von 3 % Sediment und 8 % organischen Kohlenstoff in die Beaufort See eingetragen wird. Schließlich wurde die zukünftige Entwicklung dieser rückschreitenden Rutschungen bei einem Temperaturanstieg von 2-3 °C bis 2081-2100 diskutiert. Dies könnte zu einem Anstieg der Sediment-Schmelzwasser-Freigabe von 109-114 % führen. Es kann daraus geschlossen werden, dass rückschreitende Rutschungen sensibel auf Klimabedingungen reagieren und mit der Arktischen Erwärmung größere Mengen an auftauenden Permafrost (inklusive organischen Kohlenstoff und Stickstoff) in die Umwelt freigeben werden. KW - permafrost KW - arctic KW - Canada KW - coast KW - erosion KW - Permafrost KW - Arktik KW - Kanada KW - Küste KW - Erosion Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-397947 ER - TY - JOUR A1 - van der Meij, Marijn W. A1 - Reimann, Tony A1 - Vornehm, V. K. A1 - Temme, Arnaud J. A. M. A1 - Wallinga, Jakob A1 - van Beek, Roy A1 - Sommer, Michael T1 - Reconstructing rates and patterns of colluvial soil redistribution in agrarian (hummocky) landscapes JF - Earth surface processes and landforms : the journal of the British Geomorphological Research Group N2 - Humans have triggered or accelerated erosion processes since prehistoric times through agricultural practices. Optically stimulated luminescence (OSL) is widely used to quantify phases and rates of the corresponding landscape change, by measuring the last moment of daylight exposure of sediments. However, natural and anthropogenic mixing processes, such as bioturbation and tillage, complicate the use of OSL as grains of different depositional ages become mixed, and grains become exposed to light even long after the depositional event of interest. Instead, OSL determines the stabilization age, indicating when sediments were buried below the active mixing zone. These stabilization ages can cause systematic underestimation when calculating deposition rates. Our focus is on colluvial deposition in a kettle hole in the Uckermark region, northeastern Germany. We took 32 samples from five locations in the colluvium filling the kettle hole to study both spatial and temporal patterns in colluviation. We combined OSL dating with advanced age modelling to determine the stabilization age of colluvial sediments. These ages were combined with an archaeological reconstruction of historical ploughing depths to derive the levels of the soil surface at the moment of stabilization; the deposition depths, which were then used to calculate unbiased deposition rates. We identified two phases of colluvial deposition. The oldest deposits (similar to 5 ka) were located at the fringe of the kettle hole and accumulated relatively slowly, whereas the youngest deposits (<0.3 ka) rapidly filled the central kettle hole with rates of two orders of magnitude higher. We suggest that the latter phase is related to artificial drainage, facilitating accessibility in the central depression for agricultural practices. Our results show the need for numerical dating techniques that take archaeological and soil-geomorphological information into account to identify spatiotemporal patterns of landscape change, and to correctly interpret landscape dynamics in anthropogenically influenced hilly landscapes. (c) 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd. KW - geochronology KW - OSL KW - tillage KW - erosion KW - kettle hole KW - hummocky KW - landscape evolution Y1 - 2019 U6 - https://doi.org/10.1002/esp.4671 SN - 0197-9337 SN - 1096-9837 VL - 44 IS - 12 SP - 2408 EP - 2422 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Thiede, Rasmus Christoph A1 - Ehlers, Todd T1 - Large spatial and temporal variations in Himalayan denudation JF - Earth & planetary science letters N2 - In the last decade growing interest has emerged in quantifying the spatial and temporal variations in mountain building. Until recently, insufficient data have been available to attempt such a task at the scale of large orogens such as the Himalaya. The Himalaya accommodates ongoing convergence between India and Eurasia and is a focal point for studying orogen evolution and hypothesized interactions between tectonics and climate. Here we integrate 1126 published bedrock mineral cooling ages with a transient 1D Monte-Carlo thermal-kinematic erosion model to quantify the denudation histories along similar to 2700 km of the Himalaya. The model free parameter is a temporally variable denudation rate from 50 Ma to present. Thermophysical material properties and boundary conditions were tuned to individual study areas. Monte-Carlo simulations were conducted to identify the range of denudation histories that can reproduce the observed cooling ages. Results indicate large temporal and spatial variations in denudation and these are resolvable across different tectonic units of the Himalaya. More specifically, across > 1000 km of the southern Greater Himalaya denudation rates were highest (similar to 1.5-3 mm/yr) between similar to 10 and 2 Ma and lower (0.5-2.6 mm/yr) over the last 2 My. These differences are best determined in the NW-Himalaya. In contrast to this, across the similar to 2500 km length of the northern Greater Himalaya denudation rates vary over length scales of similar to 300-1700 km. Slower denudation (<1 mm/yr) occurred between 10 and 4 Ma followed by a large increase (1.2-2.6 mm/yr) in the last similar to 4 Ma. We find that only the southern Greater Himalayan Sequence clearly supports a continuous co-evolution of tectonics, climate and denudation. Results from the higher elevation northern Greater Himalaya suggest either tectonic driven variations in denudation due to a ramp-flat geometry in the main decollement and/or recent glacially enhanced denudation. KW - Himalaya KW - exhumation KW - low temperature chronology KW - thermal modeling KW - erosion Y1 - 2013 U6 - https://doi.org/10.1016/j.epsl.2013.03.004 SN - 0012-821X VL - 371 IS - 2 SP - 278 EP - 293 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Thiede, Rasmus Christoph T1 - Tectonic and climatic controls on orogenic processes : the Northwest Himalaya, India N2 - The role of feedback between erosional unloading and tectonics controlling the development of the Himalaya is a matter of current debate. The distribution of precipitation is thought to control surface erosion, which in turn results in tectonic exhumation as an isostatic compensation process. Alternatively, subsurface structures can have significant influence in the evolution of this actively growing orogen. Along the southern Himalayan front new 40Ar/39Ar white mica and apatite fission track (AFT) thermochronologic data provide the opportunity to determine the history of rock-uplift and exhumation paths along an approximately 120-km-wide NE-SW transect spanning the greater Sutlej region of the northwest Himalaya, India. 40Ar/39Ar data indicate, consistent with earlier studies that first the High Himalayan Crystalline, and subsequently the Lesser Himalayan Crystalline nappes were exhumed rapidly during Miocene time, while the deformation front propagated to the south. In contrast, new AFT data delineate synchronous exhumation of an elliptically shaped, NE-SW-oriented ~80 x 40 km region spanning both crystalline nappes during Pliocene-Quaternary time. The AFT ages correlate with elevation, but show within the resolution of the method no spatial relationship to preexisting major tectonic structures, such as the Main Central Thrust or the Southern Tibetan Fault System. Assuming constant exhumation rates and geothermal gradient, the rocks of two age vs. elevation transects were exhumed at ~1.4 ±0.2 and ~1.1 ±0.4 mm/a with an average cooling rate of ~50-60 °C/Ma during Pliocene-Quaternary time. The locus of pronounced exhumation defined by the AFT data coincides with a region of enhanced precipitation, high discharge, and sediment flux rates under present conditions. We therefore hypothesize that the distribution of AFT cooling ages might reflect the efficiency of surface processes and fluvial erosion, and thus demonstrate the influence of erosion in localizing rock-uplift and exhumation along southern Himalayan front, rather than encompassing the entire orogen.Despite a possible feedback between erosion and exhumation along the southern Himalayan front, we observe tectonically driven, crustal exhumation within the arid region behind the orographic barrier of the High Himalaya, which might be related to and driven by internal plateau forces. Several metamorphic-igneous gneiss dome complexes have been exhumed between the High Himalaya to the south and Indus-Tsangpo suture zone to the north since the onset of Indian-Eurasian collision ~50 Ma ago. Although the overall tectonic setting is characterized by convergence the exhumation of these domes is accommodated by extensional fault systems.Along the Indian-Tibetan border the poorly described Leo Pargil metamorphic-igneous gneiss dome (31-34°N/77-78°E) is located within the Tethyan Himalaya. New field mapping, structural, and geochronologic data document that the western flank of the Leo Pargil dome was formed by extension along temporally linked normal fault systems. Motion on a major detachment system, referred to as the Leo Pargil detachment zone (LPDZ) has led to the juxtaposition of low-grade metamorphic, sedimentary rocks in the hanging wall and high-grade metamorphic gneisses in the footwall. However, the distribution of new 40Ar/39Ar white mica data indicate a regional cooling event during middle Miocene time. New apatite fission track (AFT) data demonstrate that subsequently more of the footwall was extruded along the LPDZ in a brittle stage between 10 and 2 Ma with a minimum displacement of ~9 km. Additionally, AFT-data indicate a regional accelerated cooling and exhumation episode starting at ~4 Ma. Thus, tectonic processes can affect the entire orogenic system, while potential feedbacks between erosion and tectonics appear to be limited to the windward sides of an orogenic systems. N2 - Welche Rolle Wechselwirkungen zwischen der Verteilung des Niederschlags, Erosion und Tektonik während der Entwicklung des Himalayas über geologische Zeiträume gespielt haben bzw. heute spielen, ist umstritten. Dabei ist von besonderem Interesse, ob Erosion ausschliesslich in Folge tiefkrustaler Hebungsprozesse entsteht und gesteuert wird, oder ob Regionen besonders effektiver Erosion, bedingt durch isostatische Kompensation, die Lokation tektonischer Deformation innerhalb aktiver Orogene beeinflussen können. Entlang der südlichen Himalayafront ermöglichen neue thermochronologische 40Ar/39Ar-Hellglimmer- und Apatite-Spaltspur-Alter die Bestimmung der Exhumationspfade entlang eines 120-km-langen NE-SW-gerichteten Profils, dass quer durch die gesamte Sutlej-Region des nordwestlichen, indischen Himalayas verläuft. Dabei deuten die 40Ar/39Ar-Daten in übereinstimmung mit früheren Studien darauf hin, dass zuerst das Kristallin des Hohen Himalayas und anschliessend, südwärts propagierend, das Kristallin des Niederen Himalayas während des Miozäns exhumiert worden ist. Im Gegensatz dazu weisen die neuen Apatit-Spaltspur-Alter auf eine gleichmässige und zeitgleiche Exhumation beider kristallinen Decken entlang des Sutlejflusses. Dieser 80x40 km weite Bereich formt einen elliptischen, nordost-südwest orientierten Sektor erhöhter Exhumationsraten während des Pliozäns und Quartärs. Innerhalb des Fehlerbereichs der Spaltspurmethode zeigen die Alter eine gute Korrelation mit der Höhe, zeigen aber gleichzeitig keine Abhängigkeit zu bedeutenden tektonischen Störungen, wie die "Main Central Thrust" oder dem "Southern Tibetan Fault System". Unter der vereinfachten Annahme konstanter Exhumationsraten deuten zwei verschiedene Höhenprofile auf Exhumationraten in der Grössenordnung von ~1,4 ±0,2 und ~1,1 ±0,4 mm/a bei einer durchschnittlichen Abkühlrate von ~50-60 °C/m.y. während des Pliozäns bzw. Quartärs hin. Der anhand von Spaltspuraltern bestimmte Sektor verstärkter Exhumation korreliert mit dem Gebiet, das während des Holozäns hohen Niederschlags-, Erosion- bzw. Sedimenttransportraten ausgesetzt ist. Daher vermuten wir, dass die Verteilung von jungen Spaltspuraltern den regionalen Grad der Effiziens von Oberflächenprozessen und fluviatiler Erosion wiederspiegelt. Dies deutet auf einen Zusammenhang zwischen Erosion und der Lokalisierung von Hebung und Exhumation entlang der südlichen Front des Himalayas hin, und zeigt gleichzeitig, dass die Exhumation nicht einfach über die gesamte Front gleichmässig verteilt ist.Trotz der Wechselwirkungen zwischen Exhumation und Erosion, die möglicherweise die Entwicklung der südlichen Himalayafront beeinflussen, beobachten wir auch tiefkrustale tektonische Exhumation in ariden Gebieten nördlich des Hohen Himalayas, die vermutlich im Zusammenhang mit plateauinternenen Deformationsprozessen steht. So haben sich zum Beispiel mehrere metaplutonische Gneissdomkomplexe zwischen dem Hohen Himalaya im Süden und der Indus-Tsangpo Suturzone im Norden seit der Indien-Asien Kollision vor ca. 50 Millionen Jahren entwickelt. Obwohl die Dome sich grossräumig in einem kommpressiven Spannungsfeld befinden, werden sie lokal entlang von Extensionsstrukturen exhumiert. Bis heute sind die Ursachen für die Entstehung dieser Prozesse umstritten.Entlang der Indisch-Tibetischen Grenze erstreckt sich der fast vollkommen unbeschriebene Leo-Pargil-Gneissdomkomplex (31-34°N/77-78°E) innerhalb des Tethyschen Himalayas. Neue Geländekartierungen, strukturelle und geochronologische Daten der westliche Flanke des Leo Pargil Domes dokumentieren, dass dieser sich entlang zeitlich verbundener Abschiebungssysteme in einem extensionalen Regime entwickelt hat. Im Gelände wird der Dome von einem mächtigen Störungssystem begrenzt, die "Leo Pargil Detachment Zone" (LPDZ). Durch den tektonischen Versatz entlang der LPDZ liegen heute niedriggradig metamorphe Sedimentgesteine im Hangenden neben hochgradigen Gneisen in Liegenden. Unabhängig von der Probenlokation entlang des aufgeschlossenen Störungssystemes ergeben alle neuen 40Ar/39Ar-Hellglimmeralter um die 15 Ma und deuten auf ein regional wichtiges Abkühlungsereignis hin. Im Gegensatz dazu deuten die neuen Apatit-Spaltspuralter (AFT) auf eine kontinuierliche Exhumation der hochmetamorphen Einheiten im Liegenden der LPDZ unter sprödtektonischen Bedingungen zwischen 10 und 2 Ma hin, bei einem minimalen Versatz von ungefähr 9 km. Desweiteren deuten die Apatit-Spaltspur-Daten auf überregionale beschleunigte Abkülhlungs- bzw Exhumationsphase seit 4 Ma.Daraus kann gefolgert werden, dass die tektonischen Prozesse die Entwicklung des gesamten Gebirges beflussen können, während potenzielle Wechselwirkungen zwischen Erosion und Tektonik auf die luvwärtigen Gebirgsflanken beschränkt zu bleiben scheinen. KW - Gebirgsbildung KW - Erosion KW - Hebung KW - Himalaya KW - Spalt Spuren KW - Thermochronologie KW - Klima KW - Monsoon KW - Indien KW - Orogen KW - erosion KW - uplift KW - Himalaya KW - fission track KW - thermochronology KW - climate KW - monsoon KW - India Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-2281 ER - TY - JOUR A1 - Struck, Martin A1 - Andermann, Christoff A1 - Hovius, Niels A1 - Korup, Oliver A1 - Turowski, Jens M. A1 - Bista, Raj A1 - Pandit, Hari P. A1 - Dahal, Ranjan K. T1 - Monsoonal hillslope processes determine grain size-specific suspended sediment fluxes in a trans-Himalayan river JF - Geophysical research letters N2 - Sediments in rivers record the dynamics of erosion processes. While bulk sediment fluxes are easily and routinely obtained, sediment caliber remains underexplored when inferring erosion mechanisms. Yet sediment grain size distributions may be the key to discriminating their origin. We have studied grain size-specific suspended sediment fluxes in the Kali Gandaki, a major trans-Himalayan river. Two strategically located gauging stations enable tracing of sediment caliber on either side of the Himalayan orographic barrier. The data show that fine sediment input into the northern headwaters is persistent, while coarse sediment comes from the High Himalayas during the summer monsoon. A temporally matching landslide inventory similarly indicates the prominence of monsoon-driven hillslope mass wasting. Thus, mechanisms of sediment supply can leave strong traces in the fluvial caliber, which could project well beyond the mountain front and add to the variability of the sedimentary record of orogen erosion. KW - Himalayas KW - erosion KW - grain size KW - suspended sediments KW - landslide KW - river transport Y1 - 2015 U6 - https://doi.org/10.1002/2015GL063360 SN - 0094-8276 SN - 1944-8007 VL - 42 IS - 7 SP - 2302 EP - 2308 PB - American Geophysical Union CY - Washington ER - TY - GEN A1 - Sparkes, Robert B. A1 - Hovius, Niels A1 - Galy, Albert A1 - Liu, James T. T1 - Survival of graphitized petrogenic organic carbon through multiple erosional cycles T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Graphite forms the endpoint for organic carbon metamorphism; it is extremely resilient to physical, biological and chemical degradation. Carbonaceous materials (CM) contained within sediments, collected across Taiwan and from the Gaoping submarine canyon, were analyzed using Raman spectroscopy to determine the crystallinity. This allowed the erosional and orogenic movements of petrogenic organic carbon (OCpetro) during the Taiwanese orogeny to be deduced. After automatically fitting and classifying spectra, the distribution of four groups of CM within the sediments provides evidence that many forms of OCpetro have survived at least one previous cycle of erosion, transport and burial before forming rocks in the Western Foothills of the island. There is extensive detrital graphite present in rocks that have not experienced high-grade metamorphism, and graphite flakes are also found in recently deposited marine sediments off Taiwan. The tectonic and geological history of the island shows that these graphite flakes must have survived at least three episodes of recycling. Therefore, transformation to graphite during burial and orogeny is a mechanism for stabilizing organic carbon over geological time, removing biospheric carbon from the active carbon cycle and protecting it from oxidation during future erosion events. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1223 KW - graphite KW - organic carbon KW - orogeny KW - recycling KW - Raman spectroscopy KW - erosion Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-533541 SN - 1866-8372 ER - TY - JOUR A1 - Smith, Taylor A1 - Bookhagen, Bodo T1 - Climatic and biotic controls on topographic asymmetry at the global scale JF - Journal of geophysical research : JGR, Earth surface N2 - Insolation differences play a primary role in controlling microclimate and vegetation cover, which together influence the development of topography. Topographic asymmetry (TA), or slope differences between terrain aspects, has been well documented in small-scale, field-based, and modeling studies. Here we combine a suite of environmental (e.g., vegetation, temperature, solar insolation) and topographic (e.g., elevation, drainage network) data to explore the driving mechanisms and markers of TA on a global scale. Using a novel empirical TA analysis method, we find that (1) steeper terrain has higher TA magnitudes, (2) globally, pole-facing terrain is on average steeper than equator-facing terrain, especially in mid-latitude, tectonically quiescent, and vegetated landscapes, and (3) high-elevation and low-temperature regions tend to have terrain steepened toward the equator. We further show that there are distinct differences in climate and vegetation cover across terrain aspects, and that TA is reflected in the size and form of fluvial drainage networks. Our work supports the argument that insolation asymmetries engender differences in local microclimates and vegetation on opposing terrain aspects, which broadly encourage the development of asymmetric topography across a range of lithologic, tectonic, geomorphic, and climatic settings. KW - erosion KW - freeze-thaw cycling KW - solar radiation KW - topographic asymmetry KW - topography KW - vegetation cover Y1 - 2021 U6 - https://doi.org/10.1029/2020JF005692 SN - 2169-9003 SN - 2169-9011 VL - 126 IS - 1 PB - American Geophysical Union CY - Washington ER - TY - THES A1 - Schröder, Sarah T1 - Modelling surface evolution coupled with tectonics T1 - Modellierung von Oberflächenprozessen gekoppelt mit Tektonik BT - A case study for the Pamir BT - Eine Fallstudie zum Pamir N2 - This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west. N2 - Im Rahmen dieser Studie werden 1D und 2D Erosionsmodelle im Gebirgsmaßstab implementiert und mit Modellen für tektonische Deformation gekoppelt. Die Kopplungsmethode erlaubt unterschiedlich räumliche und zeitliche Auflösungen im tektonischen und im Erosionsmodell. Es werden sowohl vertikale als auch horizontale Bewegungen zwischen den Modellen transferiert. Darüber hinaus enthält die Kopplungsmethode ein Glättungsverfahren, um eventuelle Instabilitäten des tektonischen Modelles zu kompensieren. Beide Erosionsmodelle beziehen Hangerosion, Flusseinschneidung und Sedimentation ein. Der 1D Code nutzt Hack's Law, um die Wassermengen zu berechnen. Er garantiert Massenerhaltung, indem er Sedimente in Senken speichert. Das 2D Erosionsmodell DANSER basiert auf einem zellulären Automaten. Ein zusätzlicher steigungsabhängiger Faktor erweitert lineare zu nichtlinearer Diffusion. Wassermengen werden mit Hilfe des D8-Algorithmus und einer veränderten Form von O'Callaghans (1984) Algorithmus akkumuliert. Laterale Einschneidung, berechnet durch einen neuen Verteilungs-Algorithmus, verbessert die Modellierung von Flusssystemen. Flüsse sind dabei repräsentiert durch eine unterschiedliche Anzahl an Zellen orthogonal zur Fließrichtung. Ihre Breite wird nach empirischen Gesetzen ermittelt. Die präsentierten Anwendungen dienen der Studie des Pamirgebirges. Zunächst werden die Modellparameter anhand von Einschneidungs- und Erosionsraten sowie Sedimentdurchflüssen kalibriert. Ein digitales Höhenmodell dient als Anfangstopographie und zur Extraktion von Flussprofilen. Laterale Einschneidung zeigt eine deutliche Verbesserung zu bisher vorhandenen Modellen. Sie ermöglicht die Erhaltung der Flussbreite und zeigt hohe Einschneidungsraten in engen Flusspassagen. Modelle von Flussanzapfungen in einem System paralleler Verwerfungen bestätigen die Wichtigkeit von lateraler Einschneidung für Flussanzapfungsmodelle, die Hangerosion einbeziehen. Während die Modelle eine geringe Wahrscheinlichkeit von Flussanzapfungen mit hohem Ablenkungswinkel zeigen, belegen sie auch, dass deren (allgemeine) Wahrscheinlichkeit direkt von der Hebungsrate der Verwerfungen abhängt. Die Erodibilität beschleunigt lediglich die Geschwindigkeit von Flussanzapfungen. Ein Modell, das die Codes SLIM 3D und DANSER koppelt, dokumentiert die vielseitige Verwendbarkeit des neuen Codes: Es zeigt einen geringen Einfluss von Oberflächenprozessen auf die Lithosphärendeformation, während die Sedimentationsroutine erheblich auf spröde Oberflächendeformationen einwirkt. Das Modell legt nahe, dass Sedimentation ein zwischen zwei entstehenden Gebirgen gelegenes Becken weitet. Außerdem weitet sich der südlich von der interkontinentalen Kollisionszone gelegene Teil des Gebirge-Models ebenfalls durch Sedimentation. KW - erosion KW - coupling KW - SEC KW - surface evolution KW - thermo-mechanics KW - surface processes KW - DANSER KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - tectonics KW - modelling KW - modeling KW - numerical model KW - simulation KW - surface KW - fluvial incision KW - hillslope diffusion KW - finite differences KW - finite elements KW - Eulerian grid KW - DANSER KW - DANSER KW - Erosion KW - Modellierung KW - Tektonik KW - Koppelung KW - SEC KW - numerische Modellierung KW - Oberflächenprozesse KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - Tiefendeformation KW - Software KW - Simulation KW - Oberfläche KW - fluviale Einschneidung KW - Hangerosion KW - finite Differenzen KW - finite Elemente KW - Eulerische Gitter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90385 ER - TY - JOUR A1 - Schneider, Matthias A1 - Fritzsche, Nora A1 - Puciul-Malinowska, Agnieszka A1 - Baliś, Andrzej A1 - Mostafa, Amr A1 - Bald, Ilko A1 - Zapotoczny, Szczepan A1 - Taubert, Andreas T1 - Surface etching of 3D printed poly(lactic acid) with NaOH BT - a systematic approach JF - Polymers N2 - The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds. KW - surface modification KW - sodium hydroxide etching KW - poly(lactic acid) KW - 3D KW - printing KW - roughness KW - wettability KW - erosion Y1 - 2020 U6 - https://doi.org/10.3390/polym12081711 SN - 2073-4360 VL - 12 IS - 8 PB - MDPI CY - Basel ER - TY - JOUR A1 - Schneider, Matthias A1 - Fritzsche, Nora A1 - Puciul-Malinowska, Agnieszka A1 - Balis, Andrzej A1 - Mostafa, Amr A1 - Bald, Ilko A1 - Zapotoczny, Szczepan A1 - Taubert, Andreas T1 - Surface etching of 3D printed poly(lactic acid) with NaOH: a systematic approach JF - Polymers N2 - The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds. KW - surface modification KW - sodium hydroxide etching KW - poly(lactic acid) KW - 3D printing KW - roughness KW - wettability KW - erosion Y1 - 2020 VL - 12 IS - 8 PB - MDPI CY - Basel ER - TY - GEN A1 - Schneider, Matthias A1 - Fritzsche, Nora A1 - Puciul-Malinowska, Agnieszka A1 - Balis, Andrzej A1 - Mostafa, Amr A1 - Bald, Ilko A1 - Zapotoczny, Szczepan A1 - Taubert, Andreas T1 - Surface etching of 3D printed poly(lactic acid) with NaOH: a systematic approach T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1212 KW - surface modification KW - sodium hydroxide etching KW - poly(lactic acid) KW - 3D printing KW - roughness KW - wettability KW - erosion Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-525088 SN - 1866-8372 IS - 8 ER - TY - JOUR A1 - Scherler, Dirk A1 - Bookhagen, Bodo A1 - Strecker, Manfred T1 - Tectonic control on Be-10-derived erosion rates in the Garhwal Himalaya, India JF - Journal of geophysical research : Earth surface N2 - Erosion in the Himalaya is responsible for one of the greatest mass redistributions on Earth and has fueled models of feedback loops between climate and tectonics. Although the general trends of erosion across the Himalaya are reasonably well known, the relative importance of factors controlling erosion is less well constrained. Here we present 25 Be-10-derived catchment-averaged erosion rates from the Yamuna catchment in the Garhwal Himalaya, northern India. Tributary erosion rates range between similar to 0.1 and 0.5mmyr(-1) in the Lesser Himalaya and similar to 1 and 2mmyr(-1) in the High Himalaya, despite uniform hillslope angles. The erosion-rate data correlate with catchment-averaged values of 5 km radius relief, channel steepness indices, and specific stream power but to varying degrees of nonlinearity. Similar nonlinear relationships and coefficients of determination suggest that topographic steepness is the major control on the spatial variability of erosion and that twofold to threefold differences in annual runoff are of minor importance in this area. Instead, the spatial distribution of erosion in the study area is consistent with a tectonic model in which the rock uplift pattern is largely controlled by the shortening rate and the geometry of the Main Himalayan Thrust fault (MHT). Our data support a shallow dip of the MHT underneath the Lesser Himalaya, followed by a midcrustal ramp underneath the High Himalaya, as indicated by geophysical data. Finally, analysis of sample results from larger main stem rivers indicates significant variability of Be-10-derived erosion rates, possibly related to nonproportional sediment supply from different tributaries and incomplete mixing in main stem channels. KW - Himalaya KW - erosion KW - tectonics KW - cosmogenic nuclides KW - channel steepness KW - stream power Y1 - 2014 U6 - https://doi.org/10.1002/2013JF002955 SN - 2169-9003 SN - 2169-9011 VL - 119 IS - 2 SP - 83 EP - 105 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Rosenkranz, Ruben A1 - Schildgen, Taylor F. A1 - Wittmann, Hella A1 - Spiegel, Cornelia T1 - Coupling erosion and topographic development in the rainiest place on Earth BT - Reconstructing the Shillong Plateau uplift history with in-situ cosmogenic Be-10 JF - Earth & planetary science letters N2 - The uplift of the Shillong Plateau, in northeast India between the Bengal floodplain and the Himalaya Mountains, has had a significant impact on regional precipitation patterns, strain partitioning, and the path of the Brahmaputra River. Today, the plateau receives the highest measured yearly rainfall in the world and is tectonically active, having hosted one of the strongest intra-plate earthquakes ever recorded. Despite the unique tectonic and climatic setting of this prominent landscape feature, its exhumation and surface uplift history are poorly constrained. We collected 14 detrital river sand and 3 bedrock samples from the southern margin of the Shillong Plateau to measure erosion rates using the terrestrial cosmogenic nuclide 10Be. The calculated bedrock erosion rates range from 2.0 to 5.6 m My−1, whereas catchment average erosion rates from detrital river sands range from 48 to 214 m My−1. These rates are surprisingly low in the context of steep, tectonically active slopes and extreme rainfall. Moreover, the highest among these rates, which occur on the low-relief plateau surface, appear to have been affected by anthropogenic land-use change. To determine the onset of surface uplift, we coupled the catchment averaged erosion rates with topographic analyses of the plateau's southern margin. We interpolated an inclined, pre-incision surface from minimally eroded remnants along the valley interfluves and calculated the eroded volume of the valleys carved beneath the surface. The missing volume was then divided by the volume flux derived from the erosion rates to obtain the onset of uplift. The results of this calculation, ranging from 3.0 to 5.0 Ma for individual valleys, are in agreement with several lines of stratigraphic evidence from the Brahmaputra and Bengal basin that constrain the onset of topographic uplift, specifically the onset of flexural loading and the transgression from deltaic to marine deposition. Ultimately, our data corroborate the hypothesis that surface uplift was decoupled from the onset of rapid exhumation, which occurred several millions of years earlier. KW - river profile analysis KW - land-use change KW - Be-10 KW - orographic rainfall KW - erosion Y1 - 2017 U6 - https://doi.org/10.1016/j.epsl.2017.11.047 SN - 0012-821X SN - 1385-013X VL - 483 SP - 39 EP - 51 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Rolph, Rebecca A1 - Overduin, Pier Paul A1 - Ravens, Thomas A1 - Lantuit, Hugues A1 - Langer, Moritz T1 - ArcticBeach v1.0 BT - a physics-based parameterization of pan-Arctic coastline erosion JF - Frontiers in Earth Science N2 - In the Arctic, air temperatures are increasing and sea ice is declining, resulting in larger waves and a longer open water season, all of which intensify the thaw and erosion of ice-rich coasts. Climate change has been shown to increase the rate of Arctic coastal erosion, causing problems for Arctic cultural heritage, existing industrial, military, and civil infrastructure, as well as changes in nearshore biogeochemistry. Numerical models that reproduce historical and project future Arctic erosion rates are necessary to understand how further climate change will affect these problems, and no such model yet exists to simulate the physics of erosion on a pan-Arctic scale. We have coupled a bathystrophic storm surge model to a simplified physical erosion model of a permafrost coastline. This Arctic erosion model, called ArcticBeach v1.0, is a first step toward a physical parameterization of Arctic shoreline erosion for larger-scale models. It is forced by wind speed and direction, wave period and height, sea surface temperature, all of which are masked during times of sea ice cover near the coastline. Model tuning requires observed historical retreat rates (at least one value), as well as rough nearshore bathymetry. These parameters are already available on a pan-Arctic scale. The model is validated at three study sites at 1) Drew Point (DP), Alaska, 2) Mamontovy Khayata (MK), Siberia, and 3) Veslebogen Cliffs, Svalbard. Simulated cumulative retreat rates for DP and MK respectively (169 and 170 m) over the time periods studied at each site (2007-2016, and 1995-2018) are found to the same order of magnitude as observed cumulative retreat (172 and 120 m). The rocky Veslebogen cliffs have small observed cumulative retreat rates (0.05 m over 2014-2016), and our model was also able to reproduce this same order of magnitude of retreat (0.08 m). Given the large differences in geomorphology between the study sites, this study provides a proof-of-concept that ArcticBeach v1.0 can be applied on very different permafrost coastlines. ArcticBeach v1.0 provides a promising starting point to project retreat of Arctic shorelines, or to evaluate historical retreat in places that have had few observations. KW - permafrost KW - erosion KW - modelling KW - arctic KW - climate change Y1 - 2022 U6 - https://doi.org/10.3389/feart.2022.962208 SN - 2296-6463 VL - 10 PB - Frontiers Media CY - Lausanne ER - TY - THES A1 - Rohrmann, Alexander T1 - The role of wind and water in shaping earth's plateaus T1 - Die Rolle von Wind und Wasser bei der Bildung von Hochplateaus der Erde N2 - The overarching goal of this dissertation is to provide a better understanding of the role of wind and water in shaping Earth’s Cenozoic orogenic plateaus - prominent high-elevation, low relief sectors in the interior of Cenozoic mountain belts. In particular, the feedbacks between surface uplift, the build-up of topography and ensuing changes in precipitation, erosion, and vegetation patterns are addressed in light of past and future climate change. Regionally, the study focuses on the two world’s largest plateaus, the Altiplano-Puna Plateau of the Andes and Tibetan Plateau, both characterized by average elevations of >4 km. Both plateaus feature high, deeply incised flanks with pronounced gradients in rainfall, vegetation, hydrology, and surface processes. These characteristics are rooted in the role of plateaus to act as efficient orographic barriers to rainfall and to force changes in atmospheric flow. The thesis examines the complex topics of tectonic and climatic forcing of the surface-process regime on three different spatial and temporal scales: (1) bedrock wind-erosion rates are quantified in the arid Qaidam Basin of NW Tibet over millennial timescales using cosmogenic radionuclide dating; (2) present-day stable isotope composition in rainfall is examined across the south-central Andes in three transects between 22° S and 28° S; these data are modeled and assessed with remotely sensed rainfall data of the Tropical Rainfall Measuring Mission and the Moderate Resolution Imaging Spectroradiometer; (3) finally, a 2.5-km-long Mio-Pliocene sedimentary record of the intermontane Angastaco Basin (25°45’ S, 66°00’ W) is presented in the context of hydrogen and carbon compositions of molecular lipid biomarker, and oxygen and carbon isotopes obtained from pedogenic carbonates; these records are compared to other environmental proxies, including hydrated volcanic glass shards from volcanic ashes intercalated in the sedimentary strata. There are few quantitative estimates of eolian bedrock-removal rates from arid, low relief landscapes. Wind-erosion rates from the western Qaidam Basin based on cosmogenic 10Be measurements document erosion rates between 0.05 to 0.4 mm/yr. This finding indicates that in arid environments with strong winds, hyperaridity, exposure of friable strata, and ongoing rock deformation and uplift, wind erosion can outpace fluvial erosion. Large eroded sediment volumes within the Qaidam Basin and coeval dust deposition on the Chinese Loess plateau, exemplify the importance of dust production within arid plateau environments for marine and terrestrial depositional processes, but also health issues and fertilization of soils. In the south-central Andes, the analysis of 234 stream-water samples for oxygen and hydrogen reveals that areas experiencing deep convective storms do not show the commonly observed patterns of isotopic fractionation and the expected co-varying relationships between oxygen and hydrogen with increasing elevation. These convective storms are formed over semi-arid intermontane basins in the transition between the broken foreland of the Sierras Pampeanas, the Eastern Cordillera, and the Puna Plateau in the interior of the orogen. Here, convective rainfall dominates the precipitation budget and no systematic stable isotope-elevation relationship exists. Regions to the north, in the transition between the broken foreland and the Subandean foreland fold-and-thrust belt, the impact of convection is subdued, with lower degrees of storminess and a stronger expected isotope-elevation relationship. This finding of present-day fractionation trends of meteoric water is of great importance for paleoenvironmental studies in attempts to use stable isotope relationships in the reconstruction of paleoelevations. The third part of the thesis focuses on the paleohydrological characteristics of the Mio-Pliocene (10-2 Ma) Angastaco Basin sedimentary record, which reveals far-reaching environmental changes during Andean uplift and orographic barrier formation. A precipitation- evapotranspiration record identifies the onset of a precipitation regime related to the South American Low Level Jet at this latitude after 9 Ma. Humid foreland conditions existed until 7 Ma, followed by orographic barrier uplift to the east of the present-day Angastaco Basin. This was superseded by rapid (~0.5 Myr) aridification in an intermontane basin, highlighting the effects of eastward-directed deformation. A transition in vegetation cover from a humid C3 forest ecosystem to semi-arid C4-dominated vegetation was coeval with continued basin uplift to modern elevations. N2 - Das übergreifende Ziel dieser Dissertation ist es, ein besseres Verständnis des Einflusses von Wind und Wasser auf die Entstehung orogener Plateaus im Känozoikum zu erlangen. Orogene Plateaus sind hochgelegene, durch geringes Relief und oft endorheische Entwässerung charakterisierte trockene Hochgebirgsregionen. In dieser Arbeit wird vor allem die Rückkopplung zwischen tektonischer Hebung, dem Aufbau von Relief und den daraus resultierenden Veränderungen des Niederschlags, der Erosion und variierenden Vegetationsmustern im Zusammenhang mit vergangenen und zukünftigen Klimaveränderungen untersucht. Der regionale Fokus dieser Arbeit liegt auf den zwei größten Plateaus der Erde, das Altiplano-Puna-Plateau in den Anden und das Tibet Plateau. Beide besitzen eine durchschnittliche Höhe von > 4 km. Als effiziente orographische Barrieren und „Heizflächen“ beeinflussen Plateaus großräumig die atmosphärische Zirkulation und bewirken somit ausgeprägte Gradienten in Niederschlag, Vegetation, Hydrologie und Oberflächenprozessen. Vor diesem Hintergrund untersucht diese Arbeit das komplexe Zusammenspiel zwischen Tektonik und Klima und damit verbundene Auswirkungen auf Erdoberflächenprozesse auf drei verschiedenen zeitlichen und räumlichen Skalen: (1) die Quantifizierung von Wind-Erosionsraten im Festgestein des ariden Qaidam-Beckens von Nordwest-Tibet mittels kosmogener Nukliddatierungen über Zeiräume von mehreren 103 Jahren; (2) die heutige Isotopenzusammensetzung von Niederschläge wird entlang von drei Transekten über die Südzentralanden zwischen 22° und 28° S ermittelt; diese Daten werden modelliert und der Niederschlag mit satellitenbasierten Fernerkundungsdaten der Tropical Rainfall Measuring Mission und des Moderate Resolution Imaging Spectroradiometer ausgewertet; (3) eine 2,5 km mächtige mio-pliozäne Sedimentabfolge des intermontanen Angastaco-Beckens (25°45’ S, 66°00’ W) wird auf die Wasserstoff- und Kohlenstoffzusammensetzungen von molekularen Blattwachsen und hinsichtlich der Sauerstoff- und Kohlenstoffisotopie von Bodenkarbonaten untersucht; diese Datensätze werden mit anderen Umweltindikatoren verglichen, u.a. mit hydratisierten Gläsern vulkanischer Aschen, die in der Sedimentabfolge aufgeschlossen sind. Es gibt nur wenige quantitative Abschätzungen von Winderosionsraten im Festgestein arider Gebiete mit geringem Relief. Kosmogene 10Be-Messungen im westlichen Qaidam-Becken dokumentieren Erosionsraten zwischen 0,05 bis 0,4 mm/a. Diese Resultate zeigen, dass in ariden Gebieten mit hohen Windgeschwindigkeiten, leicht erodierbaren Gesteinen und andauernder Deformation und Hebung, Wind-Erosionsprozesse die Denudationsraten der fluvialen Erosion bei weitem übersteigen kann. Das große Volumen erodierter Gesteine im Qaidam-Becken und die gleichzeitige Lössablagerung im chinesischen Löss-Plateau veranschaulichen die wichtige Rolle der äolischen Sedimentproduktion in ariden Plateaugebieten und unterstreichen deren Bedeutung für marine und terrestrische Ablagerungsprozesse sowie Nährstoffeinträge in Böden und respiratorische Gesundheitsprobleme. Die Analyse der Sauerstoff- und Wasserstoffisotopie von 234 Flusswasserproben aus den Südzentralanden belegt, dass Gebiete mit starken konvektiven meteorologischen Ereignissen nicht die erwarteten Isotopenmuster zwischen der Abnahme der Isotopie und der Höhe aufweisen. Diese konvektiven Ereignisse werden über semiariden intermontanen Becken in der Übergangszone zwischen dem zerbrochenen Vorland der Sierras Pampeanas, der Ostkordillere und dem Puna-Plateau im Inneren des Orogens gebildet. Konvektiver Niederschlag dominiert hier den Niederschlagshaushalt und eliminiert jegliche systematische Beziehung zwischen der Isotopie und der Höhe. In den nördlichen Regionen, - in der Übergangszone zwischen dem zerbrochenen Vorland und dem subandinen Falten- und Überschiebungsgürtel, verringert sich der Einfluss konvektiver Niederschläge und hydrometeorologische Extremereignisse gegenüber den orographischen bedingten Niederschlagsmechanismen. Dieser Unterschied wirkt sich in einer besseren Beziehung zwischen Isotopenverhältnissen und Höhe aus. Eine bessere Kenntnis der meteorologischen Einflüsse auf die Wasserisotopie sind der Schlüssel für zukünftige Paläoumweltstudien und zukünftige Bestrebungen, mit Hilfe der Trends in der Isotopie meteorischer Wässer das vertikale Wachstum von Gebirgen zu quantifizieren. Der dritte Teil der Arbeit behandelt die Isotopenverhältnisse in Blattwachsen und daraus abgeleitete paläohydrologische Eigenschaften des Anagastaco-Beckens im Mio-Pliozän (10-2 Ma), welche weitreichende Umweltveränderungen während der Hebung der Anden und der Bildung von orografischen Barrieren im Vorland aufzeigen. Als Proxies für Niederschlag und Evapotranspiration dokumentieren Isotopenverhältnisse in Blattwachsen, Bodenkarbonaten und vulkanischen Gläsern den Beginn eines Niederschlagsystems in diesem Teil der Anden, welches durch feuchtebringende Winde des South American Low Level Jet ab 9 Ma etabliert war. Humide Bedingungen existierten bis 7 Ma im Vorland, gefolgt von einer Bildung einer orografischen Barriere im Osten des heutigen Angastaco-Beckens. Als Folge dieser Hebung folgte eine rasche Aridifikation (innerhalb ~0,5 Ma) des nun intermontanen Angastaco-Beckens. Ein Wechsel von einem feuchten C3-Wald-Ökosystem zu semiariden Umweltbedingungen mit einer C4-dominierten Vegetationsdecke vollzog sich gleichzeitig mit der fortlaufenden Hebung des Beckens auf heutige Höhen. KW - plateau KW - isotopes KW - erosion KW - water KW - leaf wax KW - Plateau KW - stabile Isotope KW - Wasser KW - Erosion KW - Blattwachse Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-77938 ER - TY - JOUR A1 - Olen, Stephanie M. A1 - Bookhagen, Bodo A1 - Strecker, Manfred T1 - Role of climate and vegetation density in modulating denudation rates in the Himalaya JF - Earth & planetary science letters N2 - Vegetation has long been hypothesized to influence the nature and rates of surface processes. We test the possible impact of vegetation and climate on denudation rates at orogen scale by taking advantage of a pronounced along-strike gradient in rainfall and vegetation density in the Himalaya. We combine 12 new Be-10 denudation rates from the Sutlej Valley and 123 published denudation rates from fluvially-dominated catchments in the Himalaya with remotely-sensed measures of vegetation density and rainfall metrics, and with tectonic and lithologic constraints. In addition, we perform topographic analyses to assess the contribution of vegetation and climate in modulating denudation rates along strike. We observe variations in denudation rates and the relationship between denudation and topography along strike that are most strongly controlled by local rainfall amount and vegetation density, and cannot be explained by along-strike differences in tectonics or lithology. A W-E along-strike decrease in denudation rate variability positively correlates with the seasonality of vegetation density (R = 0.95, p < 0.05), and negatively correlates with mean vegetation density (R = -0.84, p < 0.05). Vegetation density modulates the topographic response to changing denudation rates, such that the functional relationship between denudation rate and topographic steepness becomes increasingly linear as vegetation density increases. We suggest that while tectonic processes locally control the pattern of denudation rates across strike of the Himalaya (i.e., S-N), along strike of the orogen (i.e., E-W) climate exerts a measurable influence on how denudation rates scatter around long-term, tectonically-controlled erosion, and on the functional relationship between topography and denudation. (C) 2016 Elsevier B.V. All rights reserved. KW - geomorphology KW - erosion KW - vegetation KW - rainfall KW - Himalaya KW - 10-Be terrestrial cosmogenic nuclides Y1 - 2016 U6 - https://doi.org/10.1016/j.epsl.2016.03.047 SN - 0012-821X SN - 1385-013X VL - 445 SP - 57 EP - 67 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Nord, Guillaume A1 - Boudevillain, Brice A1 - Berne, Alexis A1 - Branger, Flora A1 - Braud, Isabelle A1 - Dramais, Guillaume A1 - Gérard, Simon A1 - Le Coz, Jérôme A1 - Legoût, Cédric A1 - Molinié, Gilles A1 - Van Baelen, Joel A1 - Vandervaere, Jean-Pierre A1 - Andrieu, Julien A1 - Aubert, Coralie A1 - Calianno, Martin A1 - Delrieu, Guy A1 - Grazioli, Jacopo A1 - Hachani, Sahar A1 - Horner, Ivan A1 - Huza, Jessica A1 - Le Boursicaud, Raphaël A1 - Raupach, Timothy H. A1 - Teuling, Adriaan J. A1 - Uber, Magdalena A1 - Vincendon, Béatrice A1 - Wijbrans, Annette T1 - A high space–time resolution dataset linking meteorological forcing and hydro-sedimentary response in a mesoscale Mediterranean catchment (Auzon) of the Ardèche region, France T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - A comprehensive hydrometeorological dataset is presented spanning the period 1 January 201131 December 2014 to improve the understanding of the hydrological processes leading to flash floods and the relation between rainfall, runoff, erosion and sediment transport in a mesoscale catchment (Auzon, 116 km(2)) of the Mediterranean region. Badlands are present in the Auzon catchment and well connected to high-gradient channels of bedrock rivers which promotes the transfer of suspended solids downstream. The number of observed variables, the various sensors involved (both in situ and remote) and the space-time resolution (similar to km(2), similar to min) of this comprehensive dataset make it a unique contribution to research communities focused on hydrometeorology, surface hydrology and erosion. Given that rainfall is highly variable in space and time in this region, the observation system enables assessment of the hydrological response to rainfall fields. Indeed, (i) rainfall data are provided by rain gauges (both a research network of 21 rain gauges with a 5 min time step and an operational network of 10 rain gauges with a 5 min or 1 h time step), S-band Doppler dual-polarization radars (1 km(2), 5 min resolution), disdrometers (16 sensors working at 30 s or 1 min time step) and Micro Rain Radars (5 sensors, 100m height resolution). Additionally, during the special observation period (SOP-1) of the HyMeX (Hydrological Cycle in the Mediterranean Experiment) project, two X-band radars provided precipitation measurements at very fine spatial and temporal scales (1 ha, 5 min). (ii) Other meteorological data are taken from the operational surface weather observation stations of Meteo-France (including 2m air temperature, atmospheric pressure, 2 m relative humidity, 10m wind speed and direction, global radiation) at the hourly time resolution (six stations in the region of interest). (iii) The monitoring of surface hydrology and suspended sediment is multi-scale and based on nested catchments. Three hydrometric stations estimate water discharge at a 2-10 min time resolution. Two of these stations also measure additional physico-chemical variables (turbidity, temperature, conductivity) and water samples are collected automatically during floods, allowing further geochemical characterization of water and suspended solids. Two experimental plots monitor overland flow and erosion at 1 min time resolution on a hillslope with vineyard. A network of 11 sensors installed in the intermittent hydrographic network continuously measures water level and water temperature in headwater subcatchments (from 0.17 to 116 km(2)) at a time resolution of 2-5 min. A network of soil moisture sensors enables the continuous measurement of soil volumetric water content at 20 min time resolution at 9 sites. Additionally, concomitant observations (soil moisture measurements and stream gauging) were performed during floods between 2012 and 2014. Finally, this dataset is considered appropriate for understanding the rainfall variability in time and space at fine scales, improving areal rainfall estimations and progressing in distributed hydrological and erosion modelling. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 671 KW - hydraulic properties KW - soil moisture KW - flash floods KW - rainfall KW - radar KW - scale KW - variability KW - transport KW - erosion KW - model Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419127 SN - 1866-8372 IS - 671 ER - TY - JOUR A1 - Nguyen Nghia Hung, A1 - Delgado, José Miguel Martins A1 - Guentner, Andreas A1 - Merz, Bruno A1 - Bardossy, Andras A1 - Apel, Heiko T1 - Sedimentation in the floodplains of the Mekong Delta, Vietnam Part II: deposition and erosion JF - Hydrological processes N2 - Deposition and erosion play a key role in the determination of the sediment budget of a river basin, as well as for floodplain sedimentation. Floodplain sedimentation, in turn, is a relevant factor for the design of flood protection measures, productivity of agro-ecosystems, and for ecological rehabilitation plans. In the Mekong Delta, erosion and deposition are important factors for geomorphological processes like the compensation of deltaic subsidence as well as for agricultural productivity. Floodplain deposition is also counteracting the increasing climate change induced hazard by sea level rise in the delta. Despite this importance, a sediment database of the Mekong Delta is lacking, and the knowledge about erosion and deposition processes is limited. In the Vietnamese part of the Delta, the annually flooded natural floodplains have been replaced by a dense system of channels, dikes, paddy fields, and aquaculture ponds, resulting in floodplain compartments protected by ring dikes. The agricultural productivity depends on the sediment and associated nutrient input to the floodplains by the annual floods. However, no quantitative information regarding their sediment trapping efficiency has been reported yet. The present study investigates deposition and erosion based on intensive field measurements in three consecutive years (2008, 2009, and 2010). Optical backscatter sensors are used in combination with sediment traps for interpreting deposition and erosion processes in different locations. In our study area, the mean calculated deposition rate is 6.86kg/m(2) (approximate to 6mm/year). The key parameters for calculating erosion and deposition are estimated, i.e. the critical bed shear stress for deposition and erosion and the surface constant erosion rate. The bulk of the floodplain sediment deposition is found to occur during the initial stage of floodplain inundation. This finding has direct implications on the operation of sluice gates in order to optimize sediment input and distribution in the floodplains. KW - Mekong delta KW - sediment dynamics KW - deposition KW - erosion KW - floodplain sedimentation Y1 - 2014 U6 - https://doi.org/10.1002/hyp.9855 SN - 0885-6087 SN - 1099-1085 VL - 28 IS - 7 SP - 3145 EP - 3160 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Morgenstern, Anne A1 - Overduin, Pier Paul A1 - Günther, Frank A1 - Stettner, Samuel A1 - Ramage, Justine A1 - Schirrmeister, Lutz A1 - Grigoriev, Mikhail N. A1 - Grosse, Guido T1 - Thermo-erosional valleys in Siberian ice-rich permafrost JF - Permafrost and Periglacial Processes N2 - Thermal erosion is a major mechanism of permafrost degradation, resulting in characteristic landforms. We inventory thermo-erosional valleys in ice-rich coastal lowlands adjacent to the Siberian Laptev Sea based on remote sensing, Geographic Information System (GIS), and field investigations for a first regional assessment of their spatial distribution and characteristics. Three study areas with similar geological (Yedoma Ice Complex) but diverse geomorphological conditions vary in valley areal extent, incision depth, and branching geometry. The most extensive valley networks are incised deeply (up to 35 m) into the broad inclined lowland around Mamontov Klyk. The flat, low-lying plain forming the Buor Khaya Peninsula is more degraded by thermokarst and characterized by long valleys of lower depth with short tributaries. Small, isolated Yedoma Ice Complex remnants in the Lena River Delta predominantly exhibit shorter but deep valleys. Based on these hydrographical network and topography assessments, we discuss geomorphological and hydrological connections to erosion processes. Relative catchment size along with regional slope interact with other Holocene relief-forming processes such as thermokarst and neotectonics. Our findings suggest that thermo-erosional valleys are prominent, hitherto overlooked permafrost degradation landforms that add to impacts on biogeochemical cycling, sediment transport, and hydrology in the degrading Siberian Yedoma Ice Complex. KW - geomorphology KW - periglacial landscapes KW - permafrost degradation KW - thermal KW - erosion KW - valley distribution KW - Yedoma Ice Complex Y1 - 2020 U6 - https://doi.org/10.1002/ppp.2087 SN - 1045-6740 SN - 1099-1530 VL - 32 IS - 1 SP - 59 EP - 75 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Mohr, Christian Heinrich A1 - Coppus, Ruben A1 - Iroume, Andres A1 - Huber, Anton A1 - Bronstert, Axel T1 - Runoff generation and soil erosion processes after clear cutting JF - Journal of geophysical research : Earth surface N2 - Timber harvesting by clear cutting is known to impose environmental impacts, including severe disturbance of the soil hydraulic properties which intensify the frequency and magnitude of surface runoff and soil erosion. However, it remains unanswered if harvest areas act as sources or sinks for runoff and soil erosion and whether such behavior operates in a steady state or evolves through time. For this purpose, 92 small-scale rainfall simulations of different intensities were carried out under pine plantation conditions and on two clear-cut harvest areas of different age. Nonparametrical Random Forest statistical models were set up to quantify the impact of environmental variables on the hydrological and erosion response. Regardless of the applied rainfall intensity, runoff always initiated first and yielded most under plantation cover. Counter to expectations, infiltration rates increased after logging activities. Once a threshold rainfall intensity of 20mm/h was exceeded, the younger harvest area started to act as a source for both runoff and erosion after connectivity was established, whereas it remained a sink under lower applied rainfall intensities. The results suggest that the impact of microtopography on surface runoff connectivity and water-repellent properties of the topsoil act as first-order controls for the hydrological and erosion processes in such environments. Fast rainfall-runoff response, sediment-discharge-hystereses, and enhanced postlogging groundwater recharge at catchment scale support our interpretation. At the end, we show the need to account for nonstationary hydrological and erosional behavior of harvest areas, a fact previously unappreciated in predictive models. KW - infiltration KW - runoff KW - erosion KW - connectivity KW - rainfall simulation KW - catchment Y1 - 2013 U6 - https://doi.org/10.1002/jgrf.20047 SN - 2169-9003 VL - 118 IS - 2 SP - 814 EP - 831 PB - American Geophysical Union CY - Washington ER - TY - THES A1 - Mohr, Christian Heinrich T1 - Hydrological and erosion responses to man-made and natural disturbances : insights from forested catchments in South-central Chile T1 - Hydrologische und Erosions-Reaktionen auf anthropogene und natürliche Störungen : Einblicke aus bewaldeten Einzugsgebieten im südlichen Zentralchile N2 - Logging and large earthquakes are disturbances that may significantly affect hydrological and erosional processes and process rates, although in decisively different ways. Despite numerous studies that have documented the impacts of both deforestation and earthquakes on water and sediment fluxes, a number of details regarding the timing and type of de- and reforestation; seismic impacts on subsurface water fluxes; or the overall geomorphic work involved have remained unresolved. The main objective of this thesis is to address these shortcomings and to better understand and compare the hydrological and erosional process responses to such natural and man-made disturbances. To this end, south-central Chile provides an excellent natural laboratory owing to its high seismicity and the ongoing conversion of land into highly productive plantation forests. In this dissertation I combine paired catchment experiments, data analysis techniques, and physics-based modelling to investigate: 1) the effect of plantation forests on water resources, 2) the source and sink behavior of timber harvest areas in terms of overland flow generation and sediment fluxes, 3) geomorphic work and its efficiency as a function of seasonal logging, 4) possible hydrologic responses of the saturated zone to the 2010 Maule earthquake and 5) responses of the vadose zone to this earthquake. Re 1) In order to quantify the hydrologic impact of plantation forests, it is fundamental to first establish their water balances. I show that tree species is not significant in this regard, i.e. Pinus radiata and Eucalyptus globulus do not trigger any decisive different hydrologic response. Instead, water consumption is more sensitive to soil-water supply for the local hydro-climatic conditions. Re 2) Contradictory opinions exist about whether timber harvest areas (THA) generate or capture overland flow and sediment. Although THAs contribute significantly to hydrology and sediment transport because of their spatial extent, little is known about the hydrological and erosional processes occurring on them. I show that THAs may act as both sources and sinks for overland flow, which in turn intensifies surface erosion. Above a rainfall intensity of ~20 mm/h, which corresponds to <10% of all rainfall, THAs may generate runoff whereas below that threshold they remain sinks. The overall contribution of Hortonian runoff is thus secondary considering the local rainfall regime. The bulk of both runoff and sediment is generated by Dunne, saturation excess, overland flow. I also show that logging may increase infiltrability on THAs which may cause an initial decrease in streamflow followed by an increase after the groundwater storage has been refilled. Re 3) I present changes in frequency-magnitude distributions following seasonal logging by applying Quantile Regression Forests at hitherto unprecedented detail. It is clearly the season that controls the hydro-geomorphic work efficiency of clear cutting. Logging, particularly dry seasonal logging, caused a shift of work efficiency towards less flashy and mere but more frequent moderate rainfall-runoff events. The sediment transport is dominated by Dunne overland flow which is consistent with physics-based modelling using WASA-SED. Re 4) It is well accepted that earthquakes may affect hydrological processes in the saturated zone. Assuming such flow conditions, consolidation of saturated saprolitic material is one possible response. Consolidation raises the hydraulic gradients which may explain the observed increase in discharge following earthquakes. By doing so, squeezed water saturates the soil which in turn increases the water accessible for plant transpiration. Post-seismic enhanced transpiration is reflected in the intensification of diurnal cycling. Re 5) Assuming unsaturated conditions, I present the first evidence that the vadose zone may also respond to seismic waves by releasing pore water which in turn feeds groundwater reservoirs. By doing so, water tables along the valley bottoms are elevated thus providing additional water resources to the riparian vegetation. By inverse modelling, the transient increase in transpiration is found to be 30-60%. Based on the data available, both hypotheses, are not testable. Finally, when comparing the hydrological and erosional effects of the Maule earthquake with the impact of planting exotic plantation forests, the overall observed earthquake effects are comparably small, and limited to short time scales. N2 - Landmanagement und tektonische Prozesse haben einen erheblichen Einfluss auf das Abflussverhalten und den Wasser-, sowie den Sedimenthaushalt von Gebirgsregionen. Sowohl forstwirtschaftliche Bewirtschaftung, als auch starke Erdbeben sind Impulse, die hydrologische und Erosionsprozesse, sowie deren Prozessraten beeinflussen. Obwohl zahlreiche Arbeiten bereits den Einfluss von forstlicher Bewirtschaftung (Abholzungen, Aufforstungen) als auch von Erdbeben auf Wasser und Sedimentflüsse dokumentiert haben, bleiben wichtige Fragen offen. Wie entscheidend ist der Zeitpunkts der Abholzung und des nachfolgenden Wiederaufforstens? Wie wirken seismische Störungen auf unterirdische Wasserflüsse? Wie ändert sich die geomorphologische Arbeit nach Kahlschlägen? Zur Erforschung dieser Fragen bietet sich das südliche Zentralchile aufgrund seiner hohen lokalen seismischen Aktivität und der kontinuierlichen Umwidmung von Flächen in hochproduktive Plantagenwälder hervorragend an. Letztere verursachen sich häufig verändernde Umweltbedingungen durch kurze forstwirtschaftliche Rotationszyklen. Diese Dissertation betrachtet Einzugsgebiete mit vergleichbarer naturräumlicher Ausstattung. Dabei werden experimentelle Datenerhebung, ein Monitoring-Programm und Datenanalysetechniken mit prozessbasierter Modellierung kombiniert. Ziel der vorliegenden Arbeit ist: 1) die Untersuchung des Einflusses von Plantagenwäldern auf den lokalen Wasserhaushalt. Hier zeigt sich, dass die Baumart (Pinus radiata vs. Eucalyptus globulus) keinen entscheidenden Einfluss auf die lokale Wasserbilanz hat. Vielmehr ist der Bodenwasserspeicher unter dem gegebenen lokalen Hydroklima der entscheidende Faktor für den Wasserverbrauch. 2) die Untersuchung des Verhaltens von Kahlschlagflächen im Hinblick auf Quellen oder Senkenwirkung für Oberflächenabfluss und Sedimenttransport. Hier zeigt sich, dass diese Flächen sowohl als Quelle als auch als Senke für Oberflächenabfluss und Sedimenttransport wirken können – abhängig von der Regenintensität. Übersteigt diese ~20 mm/h, was <10 % der lokalen Niederschlagsereignisse entspricht, generieren Kahlschlagflächen Horton-Oberflächenabfluss (Infiltrationsüberschuss) und Sedimenttransport. Unterhalb dieses Schwellenwerts wirken sie als Senke. In Anbetracht der lokalen Niederschlagintensitäten ist der Gesamtbeitrag des Horton-Oberflächenabflusses daher sekundär. Der Großteil des Abflusses entsteht durch Dunne-Oberflächenabfluss (Sättigungsüberschuss). Zudem zeigt die vorliegende Arbeit, dass Abholzen die Infiltrabilität erhöhen kann. Dies führte dazu, dass zunächst der Gebietsabfluss abfällt bevor er erst nach Auffüllen des Grundwasserspeichers signifikant ansteigt. 3) Die Untersuchung des Einflusses von Kahlschlägen auf die hydro-geomorphologische Arbeit und ihre Effizienz. Durch das Anwenden von Quantile Regression Forests (QRF) wird auf kurzer Prozessskala gezeigt, dass Abholzung zu unterschiedlicher Jahreszeit zu signifikanten Veränderungen im Sedimenttransport führt. Vor allem Kahlschläge die während der Trockenzeit durchgeführt werden, verursachten einen Bedeutungsverlust von seltenen, stärkeren Abflussereignissen zu Gunsten der häufigeren, jedoch weniger starken Ereignissen. Hierbei dominierte der Dunne-Oberflächenabfluss. Dies stimmt mit den Ergebnissen eines prozessbasierten hydrologischen Modells (WASA-SED) überein. Es ist somit eindeutig die Jahreszeit, die die Leistung der hydro-geomorphologischer Arbeit nach Kahlschlägen prägte. 4) die Untersuchung von Grundwasserreaktionen auf das M8.8 Maule Erdbeben. Unter Grundwasserbedingungen kann der gesättigte Saprolith mit Verdichtung auf die Erdbebenerschütterungen reagieren. Dieser Prozess erhöht den hydraulischen Gradienten, der eine plausible Erklärung für den beobachteten Anstieg am Gebietsausfluss nach dem Erdbeben liefert. Die Verdichtung mobilisiert Grundwasser, das zudem von der ungesättigten Bodenmatrix aufgenommen werden kann. Hierdurch erhöht sich das Wasservolumen im Wurzelraum und begünstigt die Pflanzaktivität. Eine solche Aktivitätserhöhung spiegelt sich in verstärkten Tagesgängen wider. 5) die Untersuchung von hydrologischen Reaktionen auf das Erdbeben in der ungesättigten Zone. Hier zeigt sich, dass auch Bodenwasser aus der ungesättigten Bodenzone durch Erdbebenerschütterungen freigesetzt werden kann und den darunter liegenden Grundwasserspeicher zufließt. Hierdurch steigt der Grundwasserspiegel in den Talböden und erhöht dort die Pflanzenwasserverfügbarkeit. Durch inverse Modellierung wurde ein erdbebenbedingter Anstieg der Pflanzenaktivität von 30-60% quantifiziert. Beide Hypothesen sind jedoch auf Basis der verfügbaren Daten nicht eindeutig verifizierbar. Vergleicht man den Effekt des Erdbebens auf den Wasserhaushalt mit dem Effekt der exotischen Plantagenwälder zeigt sich, dass die Gesamtwirkung des Erdbebens auf den Wasserhaushalt vergleichsweise klein war und sich zudem auf kurze Zeiträume beschränkte. KW - Hydrologie KW - Erosion KW - Chile KW - Waldbewirtschaftung KW - Erdbeben KW - hydrology KW - erosion KW - Chile KW - forest management KW - earthquake Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-70146 ER - TY - JOUR A1 - Menges, Johanna A1 - Hovius, Niels A1 - Andermann, Christoff A1 - Lupker, Maarten A1 - Haghipour, Negar A1 - Märki, Lena A1 - Sachse, Dirk T1 - Variations in organic carbon sourcing along a trans-Himalayan river determined by a Bayesian mixing approach JF - Geochimica et cosmochimica acta : journal of the Geochemical Society and the Meteoritical Society N2 - Rivers transfer particulate organic carbon (POC) from eroding mountains into geological sinks. Organic carbon source composition and selective mobilization have been shown to affect the type and quantity of POC export, but their combined effects across complex mountain ranges remain underexplored. Here, we examine the variation in organic carbon sourcing and transport in the trans-Himalayan Kali Gandaki River catchment, along strong gradients in precipitation, rock type and vegetation. Combining bulk stable nitrogen, and stable and radioactive organic carbon isotopic composition of bedrock, litter, soil and river sediment samples with a Bayesian end-member mixing approach, we differentiate POC sources along the river and quantify their export. Our analysis shows that POC export from the Tibetan segment of the catchment, where carbon bearing shales are partially covered by aged and modern soils, is dominated by petrogenic POC. Based on our data we re-assess the presence of aged biospheric OC in this part of the catchment, and its contribution to the river load. In the High Himalayan segment, we observed low inputs of petrogenic and biospheric POC, likely due to very low organic carbon concentrations in the metamorphic bedrock, combined with erosion dominated by deep-seated landslides. Our findings show that along the Kali Gandaki River, the sourcing of sediment and organic carbon are decoupled, due to differences in rock organic carbon content, soil and above ground carbon stocks, and geomorphic process activity. While the fast eroding High Himalayas are the principal source of river sediment, the Tibetan headwaters, where erosion rates are lower, are the principal source of organic carbon. To robustly estimate organic carbon export from the Himalayas, the mountain range should be divided into tectono-physiographic zones with distinct organic carbon yields due to differences in substrate and erosion processes and rates. KW - particulate organic carbon KW - Himalaya KW - rivers KW - carbon cycle KW - stable KW - isotopes KW - erosion KW - end-member mixing Y1 - 2020 U6 - https://doi.org/10.1016/j.gca.2020.07.003 SN - 0016-7037 VL - 286 SP - 159 EP - 176 PB - Elsevier CY - New York [u.a.] ER - TY - GEN A1 - Marc, Odin A1 - Hovius, Niels T1 - Amalgamation in landslide maps BT - effects and automatic detection T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Inventories of individually delineated landslides are a key to understanding landslide physics and mitigating their impact. They permit assessment of area–frequency distributions and landslide volumes, and testing of statistical correlations between landslides and physical parameters such as topographic gradient or seismic strong motion. Amalgamation, i.e. the mapping of several adjacent landslides as a single polygon, can lead to potentially severe distortion of the statistics of these inventories. This problem can be especially severe in data sets produced by automated mapping. We present five inventories of earthquake-induced landslides mapped with different materials and techniques and affected by varying degrees of amalgamation. Errors on the total landslide volume and power-law exponent of the area–frequency distribution, resulting from amalgamation, may be up to 200 and 50%, respectively. We present an algorithm based on image and digital elevation model (DEM) analysis, for automatic identification of amalgamated polygons. On a set of about 2000 polygons larger than 1000 m2, tracing landslides triggered by the 1994 Northridge earthquake, the algorithm performs well, with only 2.7–3.6% incorrectly amalgamated landslides missed and 3.9–4.8% correct polygons incorrectly identified as amalgams. This algorithm can be used broadly to check landslide inventories and allow faster correction by automating the identification of amalgamation. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 485 KW - 2008 Wenchuan earthquake KW - size distributions KW - mountain belt KW - sediment KW - erosion KW - Taiwan KW - model Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-408075 SN - 1866-8372 IS - 485 ER - TY - THES A1 - Marc, Odin T1 - Earthquake-induced landsliding T1 - Erdbeben induzierten Hangrutschungen BT - earthquakes as erosional agents across timescales BT - Erdbeben als Erosions-Agenten über Zeitskalen N2 - Earthquakes deform Earth's surface, building long-lasting topographic features and contributing to landscape and mountain formation. However, seismic waves produced by earthquakes may also destabilize hillslopes, leading to large amounts of soil and bedrock moving downslope. Moreover, static deformation and shaking are suspected to damage the surface bedrock and therefore alter its future properties, affecting hydrological and erosional dynamics. Thus, earthquakes participate both in mountain building and stimulate directly or indirectly their erosion. Moreover, the impact of earthquakes on hillslopes has important implications for the amount of sediment and organic matter delivered to rivers, and ultimately to oceans, during episodic catastrophic seismic crises, the magnitude of life and property losses associated with landsliding, the perturbation and recovery of landscape properties after shaking, and the long term topographic evolution of mountain belts. Several of these aspects have been addressed recently through individual case studies but additional data compilation as well as theoretical or numerical modelling are required to tackle these issues in a more systematic and rigorous manner. This dissertation combines data compilation of earthquake characteristics, landslide mapping, and seismological data interpretation with physically-based modeling in order to address how earthquakes impact on erosional processes and landscape evolution. Over short time scales (10-100 s) and intermediate length scales (10 km), I have attempted to improve our understanding and ability to predict the amount of landslide debris triggered by seismic shaking in epicentral areas. Over long time scales (1-100 ky) and across a mountain belt (100 km) I have modeled the competition between erosional unloading and building of topography associated with earthquakes. Finally, over intermediate time scales (1-10 y) and at the hillslope scale (0.1-1 km) I have collected geomorphological and seismological data that highlight persistent effects of earthquakes on landscape properties and behaviour. First, I compiled a database on earthquakes that produced significant landsliding, including an estimate of the total landslide volume and area, and earthquake characteristics such as seismic moment and source depth. A key issue is the accurate conversion of landslide maps into volume estimates. Therefore I also estimated how amalgamation - when mapping errors lead to the bundling of multiple landslide into a single polygon - affects volume estimates from various earthquake-induced landslide inventories and developed an algorithm to automatically detect this artifact. The database was used to test a physically-based prediction of the total landslide area and volume caused by earthquakes, based on seismological scaling relationships and a statistical description of the landscape properties. The model outperforms empirical fits in accuracy, with 25 out of 40 cases well predicted, and allows interpretation of many outliers in physical terms. Apart from seismological complexities neglected by the model I found that exceptional rock strength properties or antecedent conditions may explain most outliers. Second, I assessed the geomorphic effects of large earthquakes on landscape dynamics by surveying the temporal evolution of precipitation-normalized landslide rate. I found strongly elevated landslide rates following earthquakes that progressively recover over 1 to 4 years, indicating that regolith strength drops and recovers. The relaxation is clearly non-linear for at least one case, and does not seem to correlate with coseismic landslide reactivation, water table level increase or tree root-system recovery. I suggested that shallow bedrock is damaged by the earthquake and then heals on annual timescales. Such variations in ground strength must be translated into shallow subsurface seismic velocities that are increasingly surveyed with ambient seismic noise correlations. With seismic noise autocorrelation I computed the seismic velocity in the epicentral areas of three earthquakes where I constrained a change in landslide rate. We found similar recovery dynamics and timescales, suggesting that seismic noise correlation techniques could be further developed to meaningfully assess ground strength variations for landscape dynamics. These two measurements are also in good agreement with the temporal dynamics of post-seismic surface displacement measured by GPS. This correlation suggests that the surface healing mechanism may be driven by tectonic deformation, and that the surface regolith and fractured bedrock may behave as a granular media that slowly compacts as it is sheared or vibrated. Last, I compared our model of earthquake-induced landsliding with a standard formulation of surface deformation caused by earthquakes to understand which parameters govern the competition between the building and destruction of topography caused by earthquakes. In contrast with previous studies I found that very large (Mw>8) earthquakes always increase the average topography, whereas only intermediate (Mw ~ 7) earthquakes in steep landscapes may reduce topography. Moreover, I illustrated how the net effect of earthquakes varies with depth or landscape steepness implying a complex and ambivalent role through the life of a mountain belt. Further I showed that faults producing a Gutenberg-Richter distribution of earthquake sizes, will limit topography over a larger range of fault sizes than faults producing repeated earthquakes with a characteristic size. N2 - Erdbeben gestalten die Erdoberfläche, sie tragen langfristig zum Aufbau von Topografie sowie zur Landschafts- und Gebirgsbildung bei. Die von Erdbeben erzeugten seismischen Erschütterungen können Gebirge jedoch auch destabilisieren und grosse Mengen an Boden sowie Grundgestein zum Abrutschen bringen und zerrüten. Erdbeben wirken daher sowohl auf die Gebirgsbildung als auch auf ihre Denudation. Ein detailliertes Verständnis der Auswirkungen von Erdbeben auf Hangstabilität ist eine wichtige Voraussetzung um die Zusammenhänge mit anderen Prozesse besser nachzuvollziehen: der kurzfristige Transport von Sedimenten und organischem Material in Flüsse und ihre Ablagerung bis in die Ozeane; der Verlust von Leben und Infrastruktur durch Hangrutschungen verbunden mit episodischen, katastrophalen, seismischen Ereignissen; die Störung und Wiederherstellung von Landschaftseigenschaften nach Erdbeben; sowie die langfristigen topographischen Entwicklung von ganzen Gebirgsketten. Einige dieser Forschungsfragen wurden kürzlich in einzelnen Fallstudien betrachtet aber zusätzliche Datenerfassung, theoretische und numerische Modellierung sind erforderlich, um diese Prozesse detaillierter zu erfassen. In dieser Dissertation werden Daten zu Eigenschaften der Erdbeben sowie aus Hangrutsch kartierungen und die Interpretation seismologischer Daten mit physikalischer Modellierung kombiniert, um die folgende übergreifende Frage zu beantworten: Wie beeinflussen Erdbeben die Erosionsprozesse in der Landschaftsentwicklung? Auf einer kurzen Zeitskala (10-100 s) und einer mittleren räumlichen Skala (10 km), habe ich versucht sowohl unser Prozessverständnis zu vertiefen als auch Vorhersagen über das gesamte Volumen der Rutschungen welche durch seismische Beben in der unmittelbaren Umgebung von Epizentren ausgelöst wurden, zu treffen und zu verbessern Auf einer langen Zeitskala (1-100 ky) und über einen Gebirgsgürtel (100 km) habe ich die durch Erdbeben ausgelösten konkurrierenden Prozesse von Abflachung von Topografie durch Erosion und den Aufbau von Topografie durch Hebung, modelliert. Auf einer mittleren Zeitskala (1-10 Jahre) und einer relativ kleinen Hangskala (0,1-1 km) habe ich geomorphologische und seismologische Daten erhoben, welche die anhaltenden Auswirkungen von Erdbeben auf Landschaftseigenschaften und deren Dynamic hervorheben. Zuerst habe ich eine Datenbank von Erdbeben erstellt, welche erhebliche Hangrutschungen ausgelöst hatten, einschliesslich einer Schätzung des gesamten Hangrutschungsvolumens und der Erdbebencharakteristiken wie z.B. seismischer Moment und Lage des Hypozentrums. Ich habe auch beurteilt, wie die Kartierung von Erdrutschen die Abschätzungen des Gesamtvolumens fehlerhaft beeinflussen können und präsentiere einen Algorithmus, um solche Fehler automatisch zu erkennen. Diese Datenbank wurde verwendet, um eine physisch-basierte Vorhersage der durch Erdbeben verursachten gesamten Hangrutschungsflächen und Volumen zu testen, welche auf seismologischen Skalierungsbeziehungen und auf einer statistischen Beschreibung der Landschaftseigenschaften basiert. Zweitens untersuchte ich den Einfluss von starken Erdbeben auf die Landschaftsdynamik durch das Vermessen der temporalen Entwicklung der Suszeptibilität von Hangrutschungen. Ich habe gezeigt, dass die stark erhöhte Hangrutschrate nach dem Erdbeben schrittweise nach einigen Jahren zurückging. Diesen Rückgang über die Zeit interpretiere ich als die Zerrüttung von oberflächennahem Gestein durch das Erdbeben und die Heilung der dadurch entstandenen Risse über der Zeit. Meine Daten deuten darauf hin, dass die Zerrüttungen und die anschliessende Heilung des Festgesteins in dem epizentralen Gebieten mit ambienten, seismischen Hintergrundrauschen überwacht werden kann. Möglicherweise wird die Heilung zusätzlich durch andauernde post-seismische Deformation angetrieben. Am Ende der Arbeit vergleiche ich meine entwickelten Modelle von erdbebenbedingten Hangrutschungen mit einer Standardformel für erdbebenverursachte Oberflächendeformierung. Mit diesem Vergleich zeige ich welche Parameter den Wettstreit zwischen der Hebung von Topografie und der gleichzeitigen Zerstörung von Topografie durch Erdbeben bestimmen. Ich zeige, dass nur mittlere - Mw ~ 7 - Erdbeben die Topografie reduzieren können im Gegensatz zu stärkeren - Mw > 8 - Beben die immer einen effektive Bildung von Topografie verursachen. Meine Ergebnisse zeigen die komplexen Zusammenhänge von Erdbeben in der Gebirgsbildung. KW - earthquake KW - landslide KW - erosion KW - Erdbeben KW - Erdrutsch KW - Erosion KW - topography KW - Topographie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-96808 ER - TY - JOUR A1 - Hoffmann, Bernd A1 - Feakins, Sarah J. A1 - Bookhagen, Bodo A1 - Olen, Stephanie M. A1 - Adhikari, Danda P. A1 - Mainali, Janardan A1 - Sachse, Dirk T1 - Climatic and geomorphic drivers of plant organic matter transport in the Arun River, E Nepal JF - Earth & planetary science letters KW - plant wax biomarker KW - leaf wax delta D KW - carbon cycle KW - remote sensing KW - erosion Y1 - 2016 U6 - https://doi.org/10.1016/j.epsl.2016.07.008 SN - 0012-821X SN - 1385-013X VL - 452 SP - 104 EP - 114 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Hoffmann, Bernd T1 - Plant organic matter mobilization and export in fluvial systems T1 - Mobilisierung und Export pflanzlicher Biomasse in Flusssystemen BT - a case study from the eastern Nepalese Arun Valley BT - Fallstudie im ost-nepalesischen Arun-Tal N2 - The global carbon cycle is closely linked to Earth’s climate. In the context of continuously unchecked anthropogenic CO₂ emissions, the importance of natural CO₂ bond and carbon storage is increasing. An important biogenic mechanism of natural atmospheric CO₂ drawdown is the photosynthetic carbon fixation in plants and the subsequent longterm deposition of plant detritus in sediments. The main objective of this thesis is to identify factors that control mobilization and transport of plant organic matter (pOM) through rivers towards sedimentation basins. I investigated this aspect in the eastern Nepalese Arun Valley. The trans-Himalayan Arun River is characterized by a strong elevation gradient (205 − 8848 m asl) that is accompanied by strong changes in ecology and climate ranging from wet tropical conditions in the Himalayan forelad to high alpine tundra on the Tibetan Plateau. Therefore, the Arun is an excellent natural laboratory, allowing the investigation of the effect of vegetation cover, climate, and topography on plant organic matter mobilization and export in tributaries along the gradient. Based on hydrogen isotope measurements of plant waxes sampled along the Arun River and its tributaries, I first developed a model that allows for an indirect quantification of pOM contributed to the mainsetm by the Arun’s tributaries. In order to determine the role of climatic and topographic parameters of sampled tributary catchments, I looked for significant statistical relations between the amount of tributary pOM export and tributary characteristics (e.g. catchment size, plant cover, annual precipitation or runoff, topographic measures). On one hand, I demonstrated that pOMsourced from the Arun is not uniformly derived from its entire catchment area. On the other, I showed that dense vegetation is a necessary, but not sufficient, criterion for high tributary pOM export. Instead, I identified erosion and rainfall and runoff as key factors controlling pOM sourcing in the Arun Valley. This finding is supported by terrestrial cosmogenic nuclide concentrations measured on river sands along the Arun and its tributaries in order to quantify catchment wide denudation rates. Highest denudation rates corresponded well with maximum pOM mobilization and export also suggesting the link between erosion and pOM sourcing. The second part of this thesis focusses on the applicability of stable isotope records such as plant wax n-alkanes in sediment archives as qualitative and quantitative proxy for the variability of past Indian Summer Monsoon (ISM) strength. First, I determined how ISM strength affects the hydrogen and oxygen stable isotopic composition (reported as δD and δ18O values vs. Vienna Standard Mean Ocean Water) of precipitation in the Arun Valley and if this amount effect (Dansgaard, 1964) is strong enough to be recorded in potential paleo-ISM isotope proxies. Second, I investigated if potential isotope records across the Arun catchment reflect ISM strength dependent precipitation δD values only, or if the ISM isotope signal is superimposed by winter precipitation or glacial melt. Furthermore, I tested if δD values of plant waxes in fluvial deposits reflect δD values of environmental waters in the respective catchments. I showed that surface water δD values in the Arun Valley and precipitation δD from south of the Himalaya both changed similarly during two consecutive years (2011 & 2012) with distinct ISM rainfall amounts (~20% less in 2012). In order to evaluate the effect of other water sources (Winter-Westerly precipitation, glacial melt) and evapotranspiration in the Arun Valley, I analysed satellite remote sensing data of rainfall distribution (TRMM 3B42V7), snow cover (MODIS MOD10C1), glacial coverage (GLIMSdatabase, Global Land Ice Measurements from Space), and evapotranspiration (MODIS MOD16A2). In addition to the predominant ISM in the entire catchment I found through stable isotope analysis of surface waters indications for a considerable amount of glacial melt derived from high altitude tributaries and the Tibetan Plateau. Remotely sensed snow cover data revealed that the upper portion of the Arun also receives considerable winter precipitation, but the effect of snow melt on the Arun Valley hydrology could not be evaluated as it takes place in early summer, several months prior to our sampling campaigns. However, I infer that plant wax records and other potential stable isotope proxy archives below the snowline are well-suited for qualitative, and potentially quantitative, reconstructions of past changes of ISM strength. N2 - Da der globale Kohlenstoffkreislauf stark mit dem Klima der Erde verknüpft ist, sind im Zusammenhang mit dem weiterhin ungebremsten anthropogenen CO₂-Ausstoß die natürliche Bindung von CO₂ und die langfristige Speicherung von Kohlenstoff um so wichtiger. Einer der wesentlichen Mechanismen des natürlichen CO₂-Abbaus ist die photosynthetische Kohlenstoffbindung in Pflanzen verknüpft mit der anschließenden langfristigen Ablagerung von Pflanzenmaterial in Sedimenten. Hauptziel der vorliegenden Dissertation ist daher, jene Faktoren zu identifizieren, die für den Abtransport toten Pflanzenmaterials in Flüssen hin zu Sedimentationsräumen verantwortlich sind. Das entsprechende Untersuchungsgebiet ist das ost-nepalesische Arun Tal. Der Arun durchschneidet den Himalaya von Nord nach Süd und sein Einzugsgebiet ist geprägt vom stärksten Höhengradienten der Erde (8848-205 m ü.N.N.). Entsprechend durchfließt er mehrere Klimazonen von alpiner Tundra auf dem Tibetischen Plateau hin zu subtropischen Bedingungen im Süden Nepals. Wegen dieses starken Gefälles bietet der Arun die Möglichkeit, die Mobilisierung und den Abtransport von Pflanzenmaterial unter sehr unterschiedlichen klimatischen, ökologischen und topographischen Gegenbenheiten zu untersuchen. Zunächst entwickelte ich ein auf Wasserstoff-Isotopen-Messungen an Pflanzenwachsen in Flusssedimenten basierendes Modell, das es ermöglicht, indirekt den Pflanzendetritus-Beitrag der Nebenflüsse in Relation zur Gesamtmasse des vom Arun abtransportierten Pflanzenmaterials zu quantifizieren. Um jene klimatischen und topografischen Eigenschaften der Seitenflüsse zu ermitteln, welche die jeweils exportierte Menge an Pflanzenmaterial kontrollieren, suchte ich im nächsten Schritt nach einem statistischen Zusammenhang zwischen exportierten Pflanzenrestmengen der Nebenflüsse sowie der Größe ihrer Einzugsgebiete, Pflanzenbedeckung, Niederschlagsmenge (bzw. Abfluss), und ihrer Topografie als Maß für Erosionsvermögen. Mit diesen Methoden kann ich einerseits klar belegen, dass das vom Arun transportierte Pflanzenmaterial nicht flächendeckend gleichmäßig aus seinem Einzugsgebiet stammt. Andererseits zeigt sich, dass dichter Pflanzenbewuchs zwar ein notwendiges, jedoch kein hinreichendes Kriterium für hohe Exportraten ist. Meine Untersuchung im Arun Tal führte letztlich zu dem Ergebnis, dass die für die Mobilisierung und den Export von Pflanzenmaterial wesentlichen Faktoren Niederschlagsmenge und Erosion sind, wobei Pflanzenbedeckung zwar vorausgesetzt ist, oft jedoch als Resultat hohen Niederschlags auftritt. Dass Erosion hierbei eine Schlüsselrolle zukommt, legt auch die Analyse von kosmogenen Nuklid-Konzentrationen in Flusssanden zur Bestimmung von Erosionsraten nahe. Ich fand eine sehr gute räumliche Übereinstimmung von hohen Erosionsraten und maximalem Pflanzendetritus-Abtransport, die den Zusammenhang beider Parameter zusätzlich belegt. Der zweite, im Rahmen der beschriebenen Untersuchung näher beleuchtete Aspekt, ist die potentielle Nutzung der Isotopenzusammensetzung von in Sedimenten enthaltenen Pflanzenwachsen als quantitativer Marker für Monsun-Variabilität in der Vergangenheit. Voraussetzung für eine entsprechende Nutzung ist einerseits, dass sich Schwankungen der Monsun-Intensität in der Isotopie des Regenwassers niederschlagen (der sogenannte amount effect, Dansgaard, 1964) und andererseits, dass die Blattwachsproduzierenden Pflanzen Monsun-Wasser aufnehmen und ausschließlich dessen Isotopie in ihre Blattwachse übernehmen. Die erste Voraussetzung konnte ich als gegeben bestätigen, da sich die Isotopenzusammensetzung der Oberflächenwasser im Arun-Tal während zwei aufeinanderfolgender, sehr unterschiedlich starker Monsun-Regenzeiten (2011 & 2012) gleichermaßen änderte, wie es an einer Wetterstation südlich des Himalaya in Bangladesh beobachtet wurde. Zur Überprüfung der zweiten Bedingung wurde zunächst mit Fernerkundungsmethoden die Regenverteilung (TRMM 3B42V7) und Schneebedeckung (MODIS MOD10C1) im Arun-Tal vor und während der Probenkampagnen 2011 und 2012 ausgewertet. Unter Hinzuziehung der stabilen Wasserstoff und Sauerstoff Isotopen-Messungen an Oberflächenwassern konnte der Einfluss verschiedenerWasserquellen (Indischer Sommer-Monsun, Schnee der Winter-Westwinde, Gletscherschmelze) sehr gut beurteilt werden: Ich konnte zeigen, dass der Arun-Fluss stark von Monsun und Eisschmelze beeinflusst wird und dass darum davon auszugehen ist, dass Blattwachse seines Einzugsgebietes nicht nur die Isotopenzusammensetzung des Monsun-Regens repräsentieren. Die Nebenflüsse jedoch, welche südlich des Himalaya-Hauptkammes unterhalb der Schneegrenze liegen, sind klar dominiert von Monsun-Regen. Das bedeutet, dass potentielle stabile Isotopen-Archive in den entsprechenden Einzugsgebieten quantitativ interpretiert werden können und die Variabilität des Sommer-Monsuns in der Vergangenheit dort absolut rekonstruiert werden könnte. KW - Pflanzenwachs KW - stabile Isotope KW - Satelliten-Fernerkundung KW - Erosion KW - plant waxes KW - stable isotopes KW - remote sensing KW - erosion Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-99336 ER - TY - JOUR A1 - Garcin, Yannick A1 - Schildgen, Taylor F. A1 - Acosta, Veronica Torres A1 - Melnick, Daniel A1 - Guillemoteau, Julien A1 - Willenbring, Jane A1 - Strecker, Manfred T1 - Short-lived increase in erosion during the African Humid Period BT - evidence from the northern Kenya Rift JF - Earth & planetary science letters N2 - The African Humid Period (AHP) between similar to 15 and 5.5 cal. kyr BP caused major environmental change in East Africa, including filling of the Suguta Valley in the northern Kenya Rift with an extensive (similar to 2150 km(2)), deep (similar to 300 m) lake. Interfingering fluvio-lacustrine deposits of the Baragoi paleo-delta provide insights into the lake-level history and how erosion rates changed during this time, as revealed by delta-volume estimates and the concentration of cosmogenic Be-10 in fluvial sand. Erosion rates derived from delta-volume estimates range from 0.019 to 0.03 mm yr(-1). Be-10-derived paleo-erosion rates at similar to 11.8 cal. kyr BP ranged from 0.035 to 0.086 mm yr(-1), and were 2.7 to 6.6 times faster than at present. In contrast, at similar to 8.7 cal. kyr BP, erosion rates were only 1.8 times faster than at present. Because Be-10-derived erosion rates integrate over several millennia; we modeled the erosion-rate history that best explains the 10Be data using established non-linear equations that describe in situ cosmogenic isotope production and decay. Two models with different temporal constraints (15-6.7 and 12-6.7 kyr) suggest erosion rates that were 25 to 300 times higher than the initial erosion rate (pre-delta formation). That pulse of high erosion rates was short (similar to 4 kyr or less) and must have been followed by a rapid decrease in rates while climate remained humid to reach the modern Be-10-based erosion rate of,similar to 0.013 mm yr(-1). Our simulations also flag the two highest Be-10-derived erosion rates at 11.8 kyr BP related to nonuniform catchment erosion. These changes in erosion rates and processes during the AHP may reflect a strong increase in precipitation, runoff, and erosivity at the arid-to-humid transition either at 15 or similar to 12 cal. kyr BP, before the landscape stabilized again, possibly due to increased soil production and denser vegetation. KW - northern Kenya Rift KW - Baragoi KW - paleo-delta KW - African Humid Period KW - erosion KW - Be-10 Y1 - 2017 U6 - https://doi.org/10.1016/j.epsl.2016.11.017 SN - 0012-821X SN - 1385-013X VL - 459 SP - 58 EP - 69 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Francke, Till T1 - Measurement and modelling of water and sediment fluxes in meso-scale dryland catchments T1 - Messung und Modellierung von Wasser- und Sedimentflüssen in mesoskaligen Trockeneinzugsgebieten N2 - Water shortage is a serious threat for many societies worldwide. In drylands, water management measures like the construction of reservoirs are affected by eroded sediments transported in the rivers. Thus, the capability of assessing water and sediment fluxes at the river basin scale is of vital importance to support management decisions and policy making. This subject was addressed by the DFG-funded SESAM-project (Sediment Export from large Semi-Arid catchments: Measurements and Modelling). As a part of this project, this thesis focuses on (1) the development and implementation of an erosion module for a meso-scale catchment model, (2) the development of upscaling and generalization methods for the parameterization of such model, (3) the execution of measurements to obtain data required for the modelling and (4) the application of the model to different study areas and its evaluation. The research was carried out in two meso-scale dryland catchments in NE-Spain: Ribera Salada (200 km²) and Isábena (450 km²). Adressing objective 1, WASA-SED, a spatially semi-distributed model for water and sediment transport at the meso-scale was developed. The model simulates runoff and erosion processes at the hillslope scale, transport processes of suspended and bedload fluxes in the river reaches, and retention and remobilisation processes of sediments in reservoirs. This thesis introduces the model concept, presents current model applications and discusses its capabilities and limitations. Modelling at larger scales faces the dilemma of describing relevant processes while maintaining a manageable demand for input data and computation time. WASA-SED addresses this challenge by employing an innovative catena-based upscaling approach: the landscape is represented by characteristic toposequences. For deriving these toposequences with regard to multiple attributes (eg. topography, soils, vegetation) the LUMP-algorithm (Landscape Unit Mapping Program) was developed and related to objective 2. It incorporates an algorithm to retrieve representative catenas and their attributes, based on a Digital Elevation Model and supplemental spatial data. These catenas are classified to provide the discretization for the WASA-SED model. For objective 3, water and sediment fluxes were monitored at the catchment outlet of the Isábena and some of its sub-catchments. For sediment yield estimation, the intermittent measurements of suspended sediment concentration (SSC) had to be interpolated. This thesis presents a comparison of traditional sediment rating curves (SRCs), generalized linear models (GLMs) and non-parametric regression using Random Forests (RF) and Quantile Regression Forests (QRF). The observed SSCs are highly variable and range over six orders of magnitude. For these data, traditional SRCs performed poorly, as did GLMs, despite including other relevant process variables (e.g. rainfall intensities, discharge characteristics). RF and QRF proved to be very robust and performed favourably for reproducing sediment dynamics. QRF additionally excels in providing estimates on the accuracy of the predictions. Subsequent analysis showed that most of the sediment was exported during intense storms of late summer. Later floods yielded successively less sediment. Comparing sediment generation to yield at the outlet suggested considerable storage effects within the river channel. Addressing objective 4, the WASA-SED model was parameterized for the two study areas in NE Spain and applied with different foci. For Ribera Salada, the uncalibrated model yielded reasonable results for runoff and sediment. It provided quantitative measures of the change in runoff and sediment yield for different land-uses. Additional land management scenarios were presented and compared to impacts caused by climate change projections. In contrast, the application for the Isábena focussed on exploring the full potential of the model's predictive capabilities. The calibrated model achieved an acceptable performance for the validation period in terms of water and sediment fluxes. The inadequate representation of the lower sub-catchments inflicted considerable reductions on model performance, while results for the headwater catchments showed good agreement despite stark contrasts in sediment yield. In summary, the application of WASA-SED to three catchments proved the model framework to be a practicable multi-scale approach. It successfully links the hillslope to the catchment scale and integrates the three components hillslope, river and reservoir in one model. Thus, it provides a feasible approach for tackling issues of water and sediment yield at the meso-scale. The crucial role of processes like transmission losses and sediment storage in the river has been identified. Further advances can be expected when the representation of connectivity of water and sediment fluxes (intra-hillslope, hillslope-river, intra-river) is refined and input data improves. N2 - In vielen Regionen der Erde stellt Wassermangel ein Problem für die menschliche Gesellschaft dar. Insbesondere in Trockengebieten werden jedoch Maßnahmen des Wassermanagements, wie die Wasserspeicherung in Stauseen, durch die im Fluss transportierten Sedimentfrachten negativ beeinflusst. Somit stellen eine adäquate Beurteilung von Wasser- und Sedimentflüssen eine wichtige Voraussetzung für Entscheidungen in Wassermanagement und -planung dar. Dieser Problematik widmete sich das SESAM-Projekt (Sediment Export from large Semi-Arid catchments: Measurements and Modelling). Im Rahmen dieses Projektes befasste sich diese Dissertation mit (1) der Entwicklung und Umsetzung eines Erosions-Moduls für ein Einzugsgebietsmodell auf der Meso-Skala, (2) der Entwicklung von Skalierungs- und Generalisierungsmethoden für die Parametrisierung eines solchen Modells, (3) der Durchführung von Messungen, um die notwendigen Daten für das Modell zu gewinnen und (4) die Anwendung des Modells für verschiedene Einzugsgebiete und seiner Bewertung. Die Studie umfasste zwei mesoskalige Trockeneinzugsgebiete in NO-Spanien: Ribera Salada (200 km²) und Isábena (450 km²). Im Hinblick auf Zielstellung 1 wurde WASA-SED, ein räumlich semi-distribuiertes Modell für Wasserflüsse und Sedimenttransport, entwickelt. Das Modell simuliert Abfluss- und Erosionsprozesse auf der Hangskala, den Transport von suspendierten und Geschiebesedimenten auf der Skala von Flussabschnitten sowie Rückhalt- und Remobilisierungsprozesse von Sedimenten in Stauseen. Die vorliegende Arbeit stellt das Modellkonzept und Modellanwendungen vor und beschreibt Fähigkeiten und Grenzen des Modells. Die Modellierung auf größeren Skalen beinhaltet das Dilemma, dass relevante Prozesse beschrieben werden müssen, gleichzeitig aber die Anforderungen an Eingabedaten und Rechenzeit realisierbar bleiben. In WASA-SED wird diesem durch die Anwendung eines innovativen Hangprofil-basierten Skalierungsansatzes Rechnung getragen, indem die Landschaft durch charakteristische Toposequenzen repräsentiert wird. Um derartige Toposequenzen hinsichtlich verschiedener Landschaftseigenschaften (z.B. Relief, Böden, Vegetation) abzuleiten, wurde in Bezug zur Zielstellung 2 der LUMP-Algorithmus (Landscape Unit Mapping Program) entwickelt. LUMP beinhaltet ein Verfahren zur Berechnung repräsentativer Hangprofile und ihrer Attribute aus einem digitalen Geländemodell und optionalen Zusatzdaten. Durch die Klassifikation dieser Hangprofile wird die Grundlage der räumlichen Diskretisierung des WASA-SED Modells bereitgestellt. Im Zusammenhang mit Zielstellung 3 wurden Abfluss und Sedimentkonzentration (SSC) am Auslass und in einigen Teileinzugsgebieten des Isábena-Einzugsgebietes gemessen. Um den Sedimentaustrag zu bestimmen, mussten die Einzelmessung der Sedimentkonzentration interpoliert werden. Diese Arbeit vergleicht die Eignung traditioneller Eichkurvenansätze (SRCs), Generalized Linear Models (GLMs) und der nichtparametrischen Regressionstechniken Random Forests (RF) und Quantile Regression Forests (QRF). Da die beobachteten SSC-Werte stark über sechs Größenordnungen variieren, erwiesen sich die traditionellen SRCs als unzureichend. Gleichfalls versagten GLMs trotz der Einbeziehung weiterer relevanter Prozessgrößen wie Niederschlagsintensitäten und Abflusscharakteristika. RF und QRF stellten sich hingegen als sehr robust und für die Rekonstruktion der Sedimentdynamik geeignet dar. QRF liefert darüber hinaus auch Informationen zur Genauigkeit dieser Schätzungen. Die darauf aufbauende Analyse ergab, dass der Großteil der Sedimentfracht während der Starkregenereignisse des Spätsommers transportiert wurde. Spätere Niederschlagsereignisse erzeugten deutlich geringeren Austrag. Durch den Vergleich von Sedimentfrachten im Oberlauf mit Austragsmengen am Gebietsauslass konnte die Bedeutung der Sedimentspeicherung im Flussbett identifiziert werden. Zielstellung 4 wurde bearbeitet, indem das WASA-SED-Modell für zwei Untersuchungsgebiete in NO-Spanien unter unterschiedlichen Gesichtspunkten angewendet wurde. Für das Ribera-Salada-Einzugsgebiet lieferte das unkalibrierte Modell plausible Ergebnisse hinsichtlich der Wasser- und Sedimentflüsse. Damit war es möglich, die potentiellen Änderungen dieser Größen durch verschiedene Landnutzungsszenarien zu quantifizieren. Diese wurden den prognostizierten Veränderungen, die durch Klimaänderungen hervorgerufen würden, gegenübergestellt. Im Gegensatz dazu konzentrierte sich die Anwendung im Isábena-Einzugsgebiet auf die Untersuchung der bestmöglichen Modellanpassung. Im Validierungszeitraum ergab sich eine befriedigende Modellgüte für Wasser- und Sedimentflüsse. Diese Gesamtgüte wurde maßgeblich durch die unzureichende Abbildung der Unterliegergebiete beeinflusst, wohingegen die Gebiete des Oberlaufs, trotz ihrer stark kontrastierenden Sedimentausträge, gut dargestellt wurden. Die Anwendung des WASA-SED-Modells auf drei verschiedene Untersuchungsgebiete bestätigt die generelle Eignung des Modellkonzepts als einen sinnvollen multiskaligen Ansatz, der in einem Modell effektiv die Hangskala mit der Einzugsgebietsskala sowie den Einfluss von Flüssen und Stauseen vereint. Er stellt somit eine mögliche Grundlage für die Bearbeitung von wasser- und sedimentbezogenen Fragestellungen auf der Meso-Skala dar. Die besondere Bedeutung der Prozesse der Sickerverluste und Sedimentspeicherung im Gerinne konnten herausgearbeitet werden. Mögliche Verbesserungen betreffen die Berücksichtigung der Konnektivität von Wasser- und Sedimentflüssen (auf dem Hang, zwischen Hang und Fluss, innerhalb des Flusses) und die Qualität der Eingangsdaten für das Modell. KW - Erosion KW - Sediment KW - Modellierung KW - Spanien KW - Brasilien KW - erosion KW - sediment KW - modelling KW - Spain KW - Brazil Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-31525 ER - TY - JOUR A1 - Forte, Adam M. A1 - Whipple, Kelin X. A1 - Bookhagen, Bodo A1 - Rossi, Matthew W. T1 - Decoupling of modern shortening rates, climate, and topography in the Caucasus JF - Earth & planetary science letters N2 - The Greater and Lesser Caucasus mountains and their associated foreland basins contain similar rock types, experience a similar two-fold, along-strike variation in mean annual precipitation, and were affected by extreme base-level drops of the neighboring Caspian Sea. However, the two Caucasus ranges are characterized by decidedly different tectonic regimes and rates of deformation that are subject to moderate (less than an order of magnitude) gradients in climate, and thus allow for a unique opportunity to isolate the effects of climate and tectonics in the evolution of topography within active orogens. There is an apparent disconnect between modern climate, shortening rates, and topography of both the Greater Caucasus and Lesser Caucasus which exhibit remarkably similar topography along-strike despite the gradients in forcing. By combining multiple datasets, we examine plausible causes for this disconnect by presenting a detailed analysis of the topography of both ranges utilizing established relationships between catchment-mean erosion rates and topography (local relief, hillslope gradients, and channel steepness) and combining it with a synthesis of previously published low-temperature thermochronologic data. Modern climate of the Caucasus region is assessed through an analysis of remotely-sensed data (TRMM and MODIS) and historical streamflow data. Because along-strike variation in either erosional efficiency or thickness of accreted material fail to explain our observations, we suggest that the topography of both the western Lesser and Greater Caucasus are partially supported by different geodynamic forces. In the western Lesser Caucasus, high relief portions of the landscape likely reflect uplift related to ongoing mantle lithosphere delamination beneath the neighboring East Anatolian Plateau. In the Greater Caucasus, maintenance of high topography in the western portion of the range despite extremely low (<2-4 mm/y) modern convergence rates may be related to dynamic topography from detachment of the north-directed Greater Caucasus slab or to a recent slowing of convergence rates. Large-scale spatial gradients in climate are not reflected in the topography of the Caucasus and do not seem to exert any significant control on the tectonics or structure of either range. (C) 2016 Elsevier B.V. All rights reserved. KW - tectonics KW - erosion KW - climate KW - dynamic topography KW - orogenic processes Y1 - 2016 U6 - https://doi.org/10.1016/j.epsl.2016.06.013 SN - 0012-821X SN - 1385-013X VL - 449 SP - 282 EP - 294 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Campforts, Benjamin A1 - Schwanghart, Wolfgang A1 - Govers, Gerard T1 - Accurate simulation of transient landscape evolution by eliminating numerical diffusion BT - the TTLEM 1.0 model T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Landscape evolution models (LEMs) allow the study of earth surface responses to changing climatic and tectonic forcings. While much effort has been devoted to the development of LEMs that simulate a wide range of processes, the numerical accuracy of these models has received less attention. Most LEMs use first-order accurate numerical methods that suffer from substantial numerical diffusion. Numerical diffusion particularly affects the solution of the advection equation and thus the simulation of retreating landforms such as cliffs and river knickpoints. This has potential consequences for the integrated response of the simulated landscape. Here we test a higher-order flux-limiting finite volume method that is total variation diminishing (TVD-FVM) to solve the partial differential equations of river incision and tectonic displacement. We show that using the TVD-FVM to simulate river incision significantly influences the evolution of simulated landscapes and the spatial and temporal variability of catchment-wide erosion rates. Furthermore, a two-dimensional TVD-FVM accurately simulates the evolution of landscapes affected by lateral tectonic displacement, a process whose simulation was hitherto largely limited to LEMs with flexible spatial discretization. We implement the scheme in TTLEM (TopoToolbox Landscape Evolution Model), a spatially explicit, raster-based LEM for the study of fluvially eroding landscapes in TopoToolbox 2. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 664 KW - stream power law KW - river incision model KW - transport KW - topography KW - hillslopes KW - equation KW - implicit KW - erosion KW - ranges Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418784 SN - 1866-8372 IS - 664 ER - TY - JOUR A1 - Bookhagen, Bodo A1 - Strecker, Manfred T1 - Spatiotemporal trends in erosion rates across a pronounced rainfall gradient: Examples from the southern Central Andes JF - Earth & planetary science letters N2 - The tectonic and climatic boundary conditions of the broken foreland and the orogen interior of the southern Central Andes of northwestern Argentina cause strong contrasts in elevation, rainfall, and surface-process regimes. The climatic gradient in this region ranges from the wet, windward eastern flanks (similar to 2 m/yr rainfall) to progressively drier western basins and ranges (similar to 0.1 m/yr) bordering the arid Altiplano-Puna Plateau. In this study, we analyze the impact of spatiotemporal climatic gradients on surface erosion: First, we present 41 new catchment-mean erosion rates derived from cosmogenic nuclide inventories to document spatial erosion patterns. Second, we re-evaluate paleoclimatic records from the Calchaquies basin (66 W, 26 S), a large intermontane basin bordered by high (> 4.5 km) mountain ranges, to demonstrate temporal variations in erosion rates associated with changing climatic boundary conditions during the late Pleistocene and Holocene. Three key observations in this region emphasize the importance of climatic parameters on the efficiency of surface processes in space and time: (1) First-order spatial patterns of erosion rates can be explained by a simple specific stream power (SSP) approach. We explicitly account for discharge by routing high-resolution, satellite derived rainfall. This is important as the steep climatic gradient results in a highly non-linear relation between drainage area and discharge. This relation indicates that erosion rates (ER) scale with ER similar to SSP1.4 on cosmogenic-nuclide time scales. (2) We identify an intrinsic channel-slope behavior in different climatic compartments. Channel slopes in dry areas (< 0.25 m/yr rainfall) are slightly steeper than in wet areas (> 0.75 m/yr) with equal drainage areas, thus compensating lower amounts of discharge with steeper slopes. (3) Erosion rates can vary by an order of magnitude between presently dry (similar to 0.05 mm/yr) and well-defined late Pleistocene humid (similar to 0.5 mm/yr) conditions within an intemontane basin. Overall, we document a strong climatic impact on erosion rates and channel slopes. We suggest that rainfall reaching areas with steeper channel slopes in the orogen interior during wetter climate periods results in intensified sediment mass transport, which is primarily responsible for maintaining the balance between surface uplift, erosion, sediment routing and transient storage in the orogen. KW - erosion KW - landscape evolution KW - specific stream power KW - cosmogenic radionuclides KW - paleoclimate KW - climate-tectonic feedback processes Y1 - 2012 U6 - https://doi.org/10.1016/j.epsl.2012.02.005 SN - 0012-821X VL - 327 IS - 8 SP - 97 EP - 110 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Behrens, Ricarda T1 - Causes for slow weathering and erosion in the steep, warm, monsoon-subjected Highlands of Sri Lanka T1 - Ursache von langsamer Verwitterung und Erosion im steilen, warmen und Monsun-beeinflussten Hochland von Sri Lanka N2 - In the Highlands of Sri Lanka, erosion and chemical weathering rates are among the lowest for global mountain denudation. In this tropical humid setting, highly weathered deep saprolite profiles have developed from high-grade metamorphic charnockite during spheroidal weathering of the bedrock. The spheroidal weathering produces rounded corestones and spalled rindlets at the rock-saprolite interface. I used detailed textural, mineralogical, chemical, and electron-microscopic (SEM, FIB, TEM) analyses to identify the factors limiting the rate of weathering front advance in the profile, the sequence of weathering reactions, and the underlying mechanisms. The first mineral attacked by weathering was found to be pyroxene initiated by in situ Fe oxidation, followed by in situ biotite oxidation. Bulk dissolution of the primary minerals is best described with a dissolution – re-precipitation process, as no chemical gradients towards the mineral surface and sharp structural boundaries are observed at the nm scale. Only the local oxidation in pyroxene and biotite is better described with an ion by ion process. The first secondary phases are oxides and amorphous precipitates from which secondary minerals (mainly smectite and kaolinite) form. Only for biotite direct solid state transformation to kaolinite is likely. The initial oxidation of pyroxene and biotite takes place in locally restricted areas and is relatively fast: log J = -11 molmin/(m2 s). However, calculated corestone-scale mineral oxidation rates are comparable to corestone-scale mineral dissolution rates: log R = -13 molpx/(m2 s) and log R = -15 molbt/(m2 s). The oxidation reaction results in a volume increase. Volumetric calculations suggest that this observed oxidation leads to the generation of porosity due to the formation of micro-fractures in the minerals and the bedrock allowing for fluid transport and subsequent dissolution of plagioclase. At the scale of the corestone, this fracture reaction is responsible for the larger fractures that lead to spheroidal weathering and to the formation of rindlets. Since these fractures have their origin from the initial oxidational induced volume increase, oxidation is the rate limiting parameter for weathering to take place. The ensuing plagioclase weathering leads to formation of high secondary porosity in the corestone over a distance of only a few cm and eventually to the final disaggregation of bedrock to saprolite. As oxidation is the first weathering reaction, the supply of O2 is a rate-limiting factor for chemical weathering. Hence, the supply of O2 and its consumption at depth connects processes at the weathering front with erosion at the surface in a feedback mechanism. The strength of the feedback depends on the relative weight of advective versus diffusive transport of O2 through the weathering profile. The feedback will be stronger with dominating diffusive transport. The low weathering rate ultimately depends on the transport of O2 through the whole regolith, and on lithological factors such as low bedrock porosity and the amount of Fe-bearing primary minerals. In this regard the low-porosity charnockite with its low content of Fe(II) bearing minerals impedes fast weathering reactions. Fresh weatherable surfaces are a pre-requisite for chemical weathering. However, in the case of the charnockite found in the Sri Lankan Highlands, the only process that generates these surfaces is the fracturing induced by oxidation. Tectonic quiescence in this region and low pre-anthropogenic erosion rate (attributed to a dense vegetation cover) minimize the rejuvenation of the thick and cohesive regolith column, and lowers weathering through the feedback with erosion. N2 - Erosions- und chemische Verwitterungsraten im srilankischen Hochland gehören zu den langsamsten der globalen Gebirgsdenudationsraten. In diesem tropischen, humiden Gebiet entwickelten sich mächtige Verwitterungsprofile – sogenannte Saprolite – auf spheroidal verwittertem, hochgradig metamorphen Charnockit. Spheroidale Verwitterung führt zu abgerundeten „corestones“ mit abgesplitterten Rinden („rindlets“) an der Gesteins – Saprolit Grenze. Zur Identifizierung der ratenlimitierenden Faktoren des Fortschreiten der Verwitterungsfront, der Sequenz der Verwitterungsreaktionen und der dahinterliegenden Mechanismen nutzte ich detaillierte gesteinsstrukturelle, mineralogische, chemische und elektronenmikroskopische (SEM, FIB, TEM) Analysemethoden. Die initiale Verwitterung beginnt mit lokal begrenzter in situ Oxidation in Pyroxen, gefolgt von in situ Oxidation von Biotit. Die Auflösung der Minerale wird am besten durch einen Auflöse – Wiederausfällungs-prozess beschrieben, da zur Mineralgrenze hin keine chemischen Gradienten, dafür aber auf der nm-Skala scharfe strukturelle Grenzen zu beobachten sind. Die ersten ausfallenden Sekundärphasen sind Oxide und amorphe Phasen aus denen sich Sekundärmineral (hauptsächlich Smectit und Kaolinit) bilden. Für Biotit ist auch eine direkte Umwandlung im Festzustand zu Kaolinit möglich. Die initiale Pyroxen- und Biotitoxidation ist relativ schnell: log J = -11 molmin/(m2 s). Berechnete Oxidationsraten auf der corestone-Skala (cm) sind vergleichbar zu Auflöseraten auf derselben Skala: log R = -13 molpx/(m2 s) und log R = -15 molbt/(m2 s). Volumetrische Berechnungen führen zum Schluss, dass die Oxidation mit einhergehender Volumenzunahme zur Entwicklung von Mikrofrakturen in den Mineralen und dem Gesamtgestein führt. Diese begünstigen Fluidtransport und damit einhergehende Plagioklasverwitterung. Des Weiteren ist diese Oxidationsreaktion verantwortlich für die Entstehung der Frakturen bei spheroidaler Verwitterung des Gesteins, welche die „rindlets“ vom „corestone“ abgrenzen. Daraus kann geschlossen werden, dass in situ Oxidation der ratenlimitierende Prozess bei der Verwitterung ist. Plagioklasverwitterung führt zu einer hohen Porositätszunahme und der endgültigen Umwandlung von Gestein zu Saprolit. Da Oxidation die erste Verwitterungsreaktion ist, verbinden die Zuführung und der Verbrauch von O2 zur, beziehungsweise an die Verwitterungsfront Erosion an der Oberfläche mit Prozessen an der Verwitterungsfront über einen Feedbackmechanismus. Daher hängt die langsame Verwitterungsrate letztlich vom Sauerstofftransport durch das Verwitterungsprofil und von lithologischen Faktoren des Charnockit wie zum Beispiel geringe Gesteinsporosität und/oder wenige Fe(II)-haltige Primärminerale ab. Des Weiteren ist der einzige Prozess im Charnockit der frische verwitterbare Oberflächen (eine Voraussetzung für chemische Verwitterung) generiert die oxidations-induzierte Frakturierung. Darüber hinaus minimieren die Abwesenheit von tektonischer Aktivität und geringe prä-anthropogene Erosionsraten in dieser Region den Abtrag des mächtigen und kohäsiven Verwitterungsprofils und somit über den beschriebenen Feedback auch die chemische Verwitterungsrate. KW - Sri Lanka KW - chemical weathering KW - erosion KW - saprolite KW - weathering feedback KW - charnockite KW - critical zone KW - mineral weathering reactions KW - Sri Lanka KW - chemische Verwitterung KW - Erosion KW - Saprolit KW - Verwitterungsfeedback KW - Charnockit KW - kritische Zone KW - Mineralverwitterungsreaktionen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-408503 ER - TY - JOUR A1 - Ballato, Paolo A1 - Landgraf, Angela A1 - Schildgen, Taylor F. A1 - Stockli, Daniel F. A1 - Fox, Matthew A1 - Ghassemi, Mohammad R. A1 - Kirby, Eric A1 - Strecker, Manfred T1 - The growth of a mountain belt forced by base-level fall: Tectonics and surface processes during the evolution of the Alborz Mountains, N Iran JF - Earth & planetary science letters N2 - The idea that climatically modulated erosion may impact orogenic processes has challenged geoscientists for decades. Although modeling studies and physical calculations have provided a solid theoretical basis supporting this interaction, to date, field-based work has produced inconclusive results. The central-western Alborz Mountains in the northern sectors of the Arabia-Eurasia collision zone constitute a promising area to explore these potential feedbacks. This region is characterized by asymmetric precipitation superimposed on an orogen with a history of spatiotemporal changes in exhumation rates, deformation patterns, and prolonged, km-scale base-level changes. Our analysis suggests that despite the existence of a strong climatic gradient at least since 17.5 Ma, the early orogenic evolution (from similar to 36 to 9-6 Ma) was characterized by decoupled orographic precipitation and tectonics. In particular, faster exhumation and sedimentation along the more arid southern orogenic flank point to a north-directed accretionary flux and underthrusting of Central Iran. Conversely, from 6 to 3 Ma, erosion rates along the northern orogenic flank became higher than those in the south, where they dropped to minimum values. This change occurred during a similar to 3-Myr-long, km-scale base-level lowering event in the Caspian Sea. We speculate that mass redistribution processes along the northern flank of the Alborz and presumably across all mountain belts adjacent to the South Caspian Basin and more stable areas of the Eurasian plate increased the sediment load in the basin and ultimately led to the underthrusting of the Caspian Basin beneath the Alborz Mountains. This underthrusting in turn triggered a new phase of northward orogenic expansion, transformed the wetter northern flank into a new pro-wedge, and led to the establishment of apparent steady-state conditions along the northern orogenic flank (i.e., rock uplift equal to erosion rates). Conversely, the southern mountain front became the retro-wedge and experienced limited tectonic activity. These observations overall raise the possibility that mass-distribution processes during a pronounced erosion phase driven by base-level changes may have contributed to the inferred regional plate-tectonic reorganization of the northern Arabia-Eurasia collision during the last similar to 5 Ma. (C) 2015 Elsevier B.V. All rights reserved. KW - orogenic processes KW - surface processes KW - base-level fall KW - erosion KW - rock uplift KW - knickpoints Y1 - 2015 U6 - https://doi.org/10.1016/j.epsl.2015.05.051 SN - 0012-821X SN - 1385-013X VL - 425 SP - 204 EP - 218 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Andermann, Christoff A1 - Crave, Alain A1 - Gloaguen, Richard A1 - Davy, Philippe A1 - Bonnet, Stephane T1 - Connecting source and transport: Suspended sediments in the Nepal Himalayas JF - Earth & planetary science letters N2 - Understanding the dynamics of sediment fluxes is a key issue to constrain modern erosion rates in mountain belts and determine the still debated level of control exerted by precipitation, topography and tectonics. The well defined monsoon seasonality in the Himalayas, together with active tectonics and strong relief provide an ideal environment to assess these possible interactions. For this purpose, we present a new compilation of daily suspended sediment data for 12 stations of the major rivers of the Nepal Himalayas. We analyze the relationships of sediment transport with daily river discharge and precipitation data as well as with morphometric parameters. We show that suspended sediment concentrations vary systematically through the seasons and asynchronously to river discharge displaying a hysteresis effect. This clockwise hysteresis effect disappears when suspended sediment fluxes are directly compared with direct storm discharge. Therefore we attribute the hysteresis effect to groundwater dilution rather than a sediment supply limitation. We infer a rating model to calculate erosion rates directly from long river discharge chronicles. We show that, when normalized by drainage area and mean sediment flux, all rivers exhibit the same trend. This similarity implies that all river basins have the same erosion behavior, independent of location, size and catchment characteristics. Erosion rates calculated from suspended sediment fluxes range between 0.1 and 2.8 mm/yr. The erosion rates of the three main basins of Nepal are in the range 0.9-1.5 mm/yr. Erosion rates in the Higher Himalayas are relatively low ( <0.5 mm/yr, except for Kali Gandaki), while in the Lesser Himalayas they range from 0.2 to 2 mm/yr. We propose that material transport in the rivers depends on hillslope sediment supply, which is, in turn, controlled by those rainfalls producing direct runoff. In other words, the rivers in the Nepal Himalayas are supply-limited and the hillsopes as a contributing source are transport-limited. We also show that erosion processes are not as much controlled by infrequently occurring extreme precipitation events, than by moderate ones with a high recurrence interval. KW - suspended sediment transport KW - Himalayas KW - erosion KW - sediment flux hysteresis KW - monsoon river hydrology KW - Himalayan rivers Y1 - 2012 U6 - https://doi.org/10.1016/j.epsl.2012.06.059 SN - 0012-821X VL - 351 SP - 158 EP - 170 PB - Elsevier CY - Amsterdam ER -