TY - JOUR A1 - Fischer, Eric Wolfgang A1 - Werther, Michael A1 - Bouakline, Foudhil A1 - Grossmann, Frank A1 - Saalfrank, Peter T1 - Non-Markovian vibrational relaxation dynamics at surfaces JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - Vibrational dynamics of adsorbates near surfaces plays both an important role for applied surface science and as a model lab for studying fundamental problems of open quantum systems. We employ a previously developed model for the relaxation of a D-Si-Si bending mode at a D:Si(100)-(2 x 1) surface, induced by a "bath " of more than 2000 phonon modes [Lorenz and P. Saalfrank, Chem. Phys. 482, 69 (2017)], to extend previous work along various directions. First, we use a Hierarchical Effective Mode (HEM) model [Fischer et al., J. Chem. Phys. 153, 064704 (2020)] to study relaxation of higher excited vibrational states than hitherto done by solving a high-dimensional system-bath time-dependent Schrodinger equation (TDSE). In the HEM approach, (many) real bath modes are replaced by (much less) effective bath modes. Accordingly, we are able to examine scaling laws for vibrational relaxation lifetimes for a realistic surface science problem. Second, we compare the performance of the multilayer multiconfigurational time-dependent Hartree (ML-MCTDH) approach with that of the recently developed coherent-state-based multi-Davydov-D2 Ansatz [Zhou et al., J. Chem. Phys. 143, 014113 (2015)]. Both approaches work well, with some computational advantages for the latter in the presented context. Third, we apply open-system density matrix theory in comparison with basically "exact " solutions of the multi-mode TDSEs. Specifically, we use an open-system Liouville-von Neumann (LvN) equation treating vibration-phonon coupling as Markovian dissipation in Lindblad form to quantify effects beyond the Born-Markov approximation. Published under an exclusive license by AIP Publishing. KW - phonons KW - Vibrational states KW - Chemical dynamics KW - Adsorption KW - Surface science KW - Open quantum systems KW - Density-matrix KW - Coherent states KW - Markov processes Y1 - 2022 U6 - https://doi.org/10.1063/5.0092836 SN - 0021-9606 SN - 1089-7690 SN - 1520-9032 VL - 156 IS - 21 PB - AIP Publishing CY - Melville ER - TY - THES A1 - Ghani, Fatemeh T1 - Nucleation and growth of unsubstituted metal phthalocyanine films from solution on planar substrates T1 - Keimbildung und Wachstum der unsubstituierten Metall-Phthalocyanin-Schichten aus der Lösung auf den planaren Oberflächen N2 - Organic solar cells (OSC) are interesting as low cost alternative to conventional solar cells. Unsubstituted Metal-phthalocyanines (Pc) are excellent electron donating molecules for heterojunction OSC. Usually organic solar cells with Pcs are produced by vapor deposition, although solution based deposition (like spin casting) is cheaper and offers more possibilities to control the structure of the film. With solution based deposition several parameters (like temperature, solvent and etc.) affect the self-organized structure formation via nucleation and growth. The reason why vapor deposition is typically used is the poor solubility of the metal-phthalocyanines in most common solvents. Furthermore the process of nucleation and growth of Pc aggregates from solution is not well understood. For preparation of Pc films from solution, it is necessary to find the appropriate solvents, assess the solution deposition techniques, such as dip coating, and spin casting. It is necessary to understand the nucleation and growth process for aggregation/precipitation and to use this knowledge to produce nanostructures appropriate for OSC. This is important because the nanostructure of the films determines their performance. In this thesis, optical absorption and the stability of 8 different unsubstituted metal Pc’s were studied quantitatively in 28 different solvents. Among the several solution based deposited thin films produced based on this study, copper phthalocyanine (CuPc) dissolved in trifluoroacetic acid (TFA) is chosen as a model system for an in-depth study. CuPc has sufficient solubility and stability in TFA and upon solution processing forms appropriate structures for OSCs. CuPc molecules aggregate into layers of nanoribbons with a thickness of ~ 1 nm and an adjustable width and length. The morphology and the number of deposited layers in the thin films are controlled by different parameters, like temperature and solution concentration. Material properties of CuPc deposited from TFA are studied in detail via x-ray diffraction, UV-Vis and FT-IR spectroscopy. Atomic force microscopy was used to study the morphology of the dried film. The mechanism of the formation of CuPc nanoribbons from spin casted CuPc/TFA solution in ambient temperature is investigated and explained. The parameters (e.g. solution concentration profile) governing nucleation and growth are calculated based on the spin casting theory of a binary mixture of a nonvolatile solute and evaporative solvent. Based on this and intermolecular interactions between CuPc and substrate a nucleation and growth model is developed explaining the aggregation of CuPc in a supersaturated TFA solution. Finally, a solution processed thin film of CuPc is applied as a donor layer in a functioning bilayer heterojunction OSC and the influence of the structure on OSC performance is studied. N2 - In den vergangenen Jahren wurden kosteneffiziente nasschemische Beschichtungsverfahren für die Herstellung organischer Dünnfilme für verschiedene opto-elektronische Anwendungen entdeckt und weiterentwickelt. Unter anderem wurden Phthalocyanin-Moleküle in photoaktiven Schichten für die Herstellung von Solarzellen intensiv erforscht. Aufgrund der kleinen bzw. unbekannten Löslichkeit wurden Phthalocyanin-Schichten durch Aufdampfverfahren im Vakuum hergestellt. Des Weiteren wurde die Löslichkeit durch chemische Synthese erhöht, was aber die Eigenschaften von Pc beeinträchtigte. In dieser Arbeit wurde die Löslichkeit, optische Absorption und Stabilität von 8 verschiedenen unsubstituierten Metall-Phthalocyaninen in 28 verschiedenen Lösungsmitteln quantitativ gemessen. Wegen ausreichender Löslichkeit, Stabilität und Anwendbarkeit in organischen Solarzellen wurde Kupferphthalocyanin (CuPc) in Trifluoressigsäure (TFA) für weitere Untersuchungen ausgewählt. Durch die Rotationsbeschichtung von CuPc aus TFA Lösung wurde ein dünner Film aus der verdampfenden Lösung auf dem Substrat platziert. Nach dem Verdampfen des Lösungsmittels, die Nanobändern aus CuPc bedecken das Substrat. Die Nanobänder haben eine Dicke von etwa ~ 1 nm (typische Dimension eines CuPc-Molekül) und variierender Breite und Länge, je nach Menge des Materials. Solche Nanobändern können durch Rotationsbeschichtung oder auch durch andere Nassbeschichtungsverfahren, wie Tauchbeschichtung, erzeugt werden. Ähnliche Fibrillen-Strukturen entstehen durch Nassbeschichtung von anderen Metall-Phthalocyaninen, wie Eisen- und Magnesium-Phthalocyanin, aus TFA-Lösung sowie auf anderen Substraten, wie Glas oder Indium Zinnoxid. Materialeigenschaften von aufgebrachten CuPc aus TFA Lösung und CuPc in der Lösung wurden ausführlich mit Röntgenbeugung, Spektroskopie- und Mikroskopie Methoden untersucht. Es wird gezeigt, dass die Nanobänder nicht in der Lösung, sondern durch Verdampfen des Lösungsmittels und der Übersättigung der Lösung entstehen. Die Rasterkraftmikroskopie wurde dazu verwendet, um die Morphologie des getrockneten Films bei unterschiedlicher Konzentration zu studieren. Der Mechanismus der Entstehung der Nanobändern wurde im Detail studiert. Gemäß der Keimbildung und Wachstumstheorie wurde die Entstehung der CuPc Nanobänder aus einer übersättigt Lösung diskutiert. Die Form der Nanobändern wurde unter Berücksichtigung der Wechselwirkung zwischen den Molekülen und dem Substrat diskutiert. Die nassverarbeitete CuPc-Dünnschicht wurde als Donorschicht in organischen Doppelschicht Solarzellen mit C60-Molekül, als Akzeptor eingesetzt. Die Effizienz der Energieumwandlung einer solchen Zelle wurde entsprechend den Schichtdicken der CuPc Schicht untersucht. KW - Kupferphthalocyanin KW - Keimbildung und Wachstum KW - Rotationsbeschichtung KW - Organische Solarzellen KW - Copper Phthalocyanine KW - Adsorption KW - nucleation and growth KW - Spin casting KW - Organic Solar Cell Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64699 ER - TY - THES A1 - Gutjahr, Petra T1 - Conformations of semiflexible polymers and filaments T1 - Konformationen von semiflexiblen Polymeren und Filamenten N2 - The biological function and the technological applications of semiflexible polymers, such as DNA, actin filaments and carbon nanotubes, strongly depend on their rigidity. Semiflexible polymers are characterized by their persistence length, the definition of which is the subject of the first part of this thesis. Attractive interactions, that arise e.g.~in the adsorption, the condensation and the bundling of filaments, can change the conformation of a semiflexible polymer. The conformation depends on the relative magnitude of the material parameters and can be influenced by them in a systematic manner. In particular, the morphologies of semiflexible polymer rings, such as circular nanotubes or DNA, which are adsorbed onto substrates with three types of structures, are studied: (i) A topographical channel, (ii) a chemically modified stripe and (iii) a periodic pattern of topographical steps. The results are compared with the condensation of rings by attractive interactions. Furthermore, the bundling of two individual actin filaments, whose ends are anchored, is analyzed. This system geometry is shown to provide a systematic and quantitative method to extract the magnitude of the attraction between the filaments from experimentally observable conformations of the filaments. N2 - Die biologische Funktion und die technologischen Anwendungen semiflexibler Polymere, wie DNA, Aktinfilamente und Nanoröhren aus Kohlenstoff, werden wesentlich von deren Biegesteifigkeit bestimmt. Semiflexible Polymere werden charakterisiert durch ihre Persistenzlänge, mit deren Definition sich der erste Teil dieser Arbeit befasst. Anziehende Wechselwirkungen, wie sie z.B. bei der Adsorption, der Kondensation und der Bündelung von Filamenten auftreten, können die Konformation eines semiflexiblen Polymers verändern. Die Konformation ist dabei abhängig von der relativen Größe der Materialparameter und kann durch diese gezielt beeinflusst werden. Im Einzelnen werden hier die Morphologien semiflexibler Polymerringe, wie z.B. DNA oder ringförmiger Nanoröhren, untersucht, die auf drei verschieden strukturierten Substraten adsorbieren: (i) Ein topographischer Kanal, (ii) ein chemisch modifizierter Streifen und (iii) ein periodisches Muster topographischer Oberflächenstufen. Die Ergebnisse werden mit der Kondensation von Ringen durch anziehende Wechselwirkungen verglichen. Des Weiteren wird die Bündelung zweier Aktinfilamente, deren Enden verankert sind, untersucht. Diese Systemgeometrie liefert eine systematische Methode, um die Stärke der Anziehung zwischen den Filamenten aus experimentell beobachtbaren Konformationen zu berechnen. KW - Polymere KW - Filamente KW - Persistenzlänge KW - Adsorption KW - Filament-Bündel KW - polymers KW - filaments KW - persistence length KW - adsorption KW - filament bundles Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15918 ER - TY - THES A1 - Haase, Martin F. T1 - Modification of nanoparticle surfaces for emulsion stabilization and encapsulation of active molecules for anti-corrosive coatings T1 - Nanopartikel Oberflächenmodifikationen zur Emulsionsstabilisierung und Verkapselung von Wirkstoffen für Antikorrosionsbeschichtungen N2 - Within this work, three physicochemical methods for the hydrophobization of initially hydrophilic solid particles are investigated. The modified particles are then used for the stabilization of oil-in-water (o/w) emulsions. For all introduced methods electrostatic interactions between strongly or weakly charged groups in the system are es-sential. (i) Short chain alkylammonium bromides (C4 – C12) adsorb on oppositely charged solid particles. Macroscopic contact angle measurements of water droplets under air and hexane on flat silica surfaces in dependency of the surface charge density and alkylchain-length allow the calculation of the surface energy and give insights into the emulsification properties of solid particles modified with alkyltrimethylammonium bromides. The measure-ments show an increase of the contact angle with increasing surface charge density, due to the enhanced adsorp-tion of the oppositely charged alkylammonium bromides. Contact angles are higher for longer alkylchain lengths. The surface energy calculations show that in particular the surface-hexane or surface-air interfacial en-ergy is being lowered upon alkylammonium adsorption, while a significant increase of the surface-water interfa-cial energy occurs only at long alkyl chain lengths and high surface charge densities. (ii) The thickness and the charge density of an adsorbed weak polyelectrolyte layer (e.g. PMAA, PAH) influence the wettability of nanoparticles (e.g. alumina, silica, see Scheme 1(b)). Furthermore, the isoelectric point and the pH range of colloidal stability of particle-polyelectrolyte composites depend on the thickness of the weak polye-lectrolyte layer. Silica nanoparticles with adsorbed PAH and alumina nanoparticles with adsorbed PMAA be-come interfacially active and thus able to stabilize o/w emulsions when the degree of dissociation of the polye-lectrolyte layer is below 80 %. The average droplet size after emulsification of dodecane in water depends on the thickness and the degree of dissociation of the adsorbed PE-layer. The visualization of the particle-stabilized o/w emulsions by cryogenic SEM shows that for colloidally stable alumina-PMAA composites the oil-water interface is covered with a closely packed monolayer of particles, while for the colloidally unstable case closely packed aggregated particles deposit on the interface. (iii) By emulsifying a mixture of the corrosion inhibitor 8-hydroxyquinoline (8-HQ) and styrene with silica nanoparticles a highly stable o/w emulsion can be obtained in a narrow pH window. The amphoteric character of 8-HQ enables a pH dependent electrostatic interaction with silica nanoparticles, which can render them interfa-cially active. Depending on the concentration and the degree of dissociation of 8-HQ the adsorption onto silica results from electrostatic or aromatic interactions between 8-HQ and the particle-surface. At intermediate amounts of adsorbed 8-HQ the oil wettability of the particles becomes sufficient for stabilizing o/w emulsions. Cryogenic SEM visualization shows that the particles arrange then in a closely packed shell consisting of partly of aggregated domains on the droplet interface. For further increasing amounts of adsorbed 8-HQ the oil wet-tability is reduced again and the particles ability to stabilize emulsions decreases. By the addition of hexadecane to the oil phase the size of the droplets can be reduced down to 200 nm by in-creasing the silica mass fraction. Subsequent polymerization produces corrosion inhibitor filled (20 wt-%) poly-styrene-silica composite particles. The measurement of the release of 8-hydroxyquinoline shows a rapid increase of 8-hydroxyquinoline in a stirred aqueous solution indicating the release of the total content in less than 5 min-utes. The method is extended for the encapsulation of other organic corrosion inhibitors. The silica-polymer-inhibitor composite particles are then dispersed in a water based alkyd emulsion, and the dispersion is used to coat flat aluminium substrates. After drying and cross-linking the polmer-film Confocal Laser Scanning Micros-copy is employed revealing a homogeneous distribution of the particles in the film. Electrochemical Impedance Spectroscopy in aqueous electrolyte solutions shows that films with aggregated particle domains degrade with time and don’t provide long-term corrosion protection of the substrate. However, films with highly dispersed particles have high barrier properties for corrosive species. The comparison of films containing silica-polystyrene composite particles with and without 8-hydroxyquinoline shows higher electrochemical impedances when the inhibitor is present in the film. By applying the Scanning Vibrating Electrode Technique the localized corrosion rate in the fractured area of scratched polymer films containing the silica-polymer-inhibitor composite particles is studied. Electrochemical corrosion cannot be suppressed but the rate is lowered when inhibitor filled composite particles are present in the film. By depositing six polyelectrolyte layers on particle stabilized emulsion droplets their surface morphology changes significantly as shown by SEM visualization. When the oil wettability of the outer polyelectrolyte layer increases, the polyelectrolyte coated droplets can act as emulsion stabilizers themselves by attaching onto bigger oil droplets in a closely packed arrangement. In the presence of 3 mM LaCl3 8-HQ hydrophobized silica particles aggregate strongly on the oil-water inter-face. The application of an ultrasonic field can remove two dimensional shell-compartments from the droplet surface, which are then found in the aqueous bulk phase. Their size ranges up to 1/4th of the spherical particle shell. N2 - Im Rahmen dieser Arbeit wurden drei Oberflächenmodifikationen zur Hydrophobierung von ursprünglich hydrophilen Feststoffpartikeln entwickelt. Die so modifizierten Partikel werden dann zur Stabilisierung von Öl-in-Wasser Emulsionen verwendet. Für sämtliche entwickelte Methoden sind elektrostatische Wechselwirkungen zwischen stark oder schwach dissoziierten chemischen Gruppen essentiell. (i) Kurzkettige Alkyltrimethylammonium Bromide (C4-C12) adsorbieren auf entgegengesetzt geladenen Partikeln. Makroskopische Kontaktwinkelmessungen von Wasser Tropfen in Luft und Hexan auf flachen Siliziumoxid Oberflächen mit variabler Oberflächenladungsdichte und Alkylkettenlänge ermöglichen die Berechnung der Oberflächenenergie und geben Einblicke in die Emulgationseigenschaften von so modifizierten Feststoffpartikeln. Die Messungen zeigen einen Anstieg des Kontakwinkels mit steigender Oberflächenladungsdichte, bedingt durch die verstärkte Adsorption von entgegengesetzt geladenen Alkyltrimethylammonium Bromiden. Die Kontaktwinkel sind zudem größer für längerkettige Alkyltrimethylammonium Bromide. Die Berechnungen der Oberflächenenergie zeigen, dass besonders die Feststoff-Hexan oder Feststoff-Luft Grenzflächenenergie durch die Adsorption verringert wird, wohingegen die Feststoff-Wasser Oberflächenenergie nur bei längeren Alkylkettenlängen und hohen Oberflächenladungsdichten signifikant ansteigt. (ii) Die Schichtdicke und Ladungsdichte von adsorbierten schwachen Polyelektrolyten (z.B. PMAA, PAH) beeinflusst die Benetzbarkeit von Nanopartikeln (z.B. Aluminiumoxid, Siliziumoxid). Der isoelektrische Punkt und der pH Bereich für kolloidale Stabilität solcher Polyelektrolyt modifizierter Partikel hängt von der Dicke der Polyelektrolytschicht ab. Siliziumoxid und Aluminiumoxid Nanopartikel mit adsorbierten PAH bzw. PMAA werden Grenzflächenaktiv und dadurch befähigt Öl-in-Wasser Emulsionen zu stabilisieren, wenn der Dissoziationsgrad der Polyelektrolytschicht geringer als 80 % ist. Die durchschnittliche Tropfengröße von Dodecan-in-Wasser Emulsionen ist abhängig von der Polyelektrolytschichtdicke und dem Dissoziationsgrad. Die Visualisierung von Partikel stabilisierten Öl-in-Wasser Emulsionen durch kryogene REM zeigt, dass im Falle von kolloidal stabilen Aluminiumoxid-PMAA Partikeln die Öl-Tröpfchen mit einer dichtgepackten Partikelhülle belegt sind, während für kolloidal destabilisierte Partikel eine Hülle aus aggregierten Partikeln gefunden wird. (iii) Durch das Emulgieren einer Lösung des Korrosionsinhibitors 8-Hydroxychinolins (8HQ) in Styrol mit Siliziumoxid Nanopartikeln können stabile Öl-in-Wasser Emulsionen in einem pH Fenster von 4 - 6 hergestellt werden. Der amphoterische Charakter von 8HQ ermöglicht eine pH abhängige elektrostatische Wechselwirkung mit den Siliziumdioxid Nanopartikeln, welche diese Grenzflächenaktiv werden lässt. In Abhängigkeit der Konzentration und des Dissoziationsgrads von 8HQ folgt die Adsorption auf Siliziumdioxid aus elektrostatischen oder aromatischen Wechselwirkungen zwischen 8HQ und der Partikeloberfläche. Bei mittleren adsorbierten Mengen wird die Öl Benetzbarkeit der Partikel ausreichend erhöht um Öl-in-Wasser Emulsionen zu stabilisieren. Kryogene REM zeigt, dass die Partikel dann in dicht gepackte Hüllen, mit teilweise aggregierten Domänen auf der Öltröpfchenoberfläche vorliegen. Durch weiter ansteigende adsorbierte 8HQ Mengen wird die Öl-Benetzbarkeit wieder zurückgesetzt und die Emulgationsfähigkeit der Partikel aufgehoben. Durch die Zugabe von Hexadecan zur Öl Phase kann die Tropfengröße durch Erhöhung des Siliziumdioxid Anteils auf 200 nm herabgesetzt werden. Anschließende Polymerisation des Styrols generiert Korrosionsinhibitor gefüllte (20 Gew-%) Polystyrol-Silizumoxid Komposite. Die Messung der Freisetzungsrate von 8HQ zeigt einen schnellen Anstieg der 8HQ Konzentration in einer gerührten wässrigen Lösung innerhalb von 5 Minuten. Die Verkapselungsmethode wird auch für andere organische Korrosionsinhibitoren erweitert. Die Komposite werden dann in einer wasserbasierten Alkydpräpolymeremulsion dispergiert und diese Mischung wird zur Beschichtung von flachen Aluminiumplatten genutzt. Nach Trocknung und Quervernetzung des Films wird Konfokale Laser Mikroskopie dazu verwendet um die räumliche Verteilung der Composite im Film zu visualisieren. Elektrochemische Impedanzspektroskopie zeigt, dass die Barriereeigenschaften des Films durch die Anwesenheit der Komposite verbessert sind. Raster Vibrationselektroden Messungen zeigen, dass die Korrosionsrate in einem Kratzer des Films durch die Anwesenheit der Inhibitor efüllten Komposite reduziert ist. Durch die Ablagerung von 6 Polyelektroytschichten auf Feststoffstabilisierten Emulsionströpfchen verändert sich deren Oberflächenmorphologie deutlich (gezeigt durch REM). Wenn die Ölbenetzbarkeit der äußeren Polyelektrolytschicht ansteigt, dann können solche Polyelektolytbeschichteten Feststoffstabilisierte Emulsionströpfchen selber als Emulsionsstabilisatoren verwendet werden. Diese lagern sich dann in einer dicht gepackten Schicht auf der Oberfläche von größeren Emulsionstropfen ab. In der Gegenwart von 3 mM LaCl3 aggregieren 8HQ modifizierte Siliziumoxid Partikel stark auf der Öl-Wasser Grenzfläche. Der Einsatz von Ultraschall kann aggregierte Schalenbestandteile von der Tropfenoberfläche wegreißen. Diese Wracks können bis zu einem Viertel der Kugelhülle ausmachen und liegen dann als kolloidale Schalen im Wasser vor. KW - Nanopartikel KW - Emulsionen KW - Polyelektrolyte KW - Korrosion KW - Adsorption KW - nanoparticles KW - emulsions KW - polyelectrolytes KW - corrosion KW - adsorption Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-55413 ER - TY - THES A1 - Kraikivski, Pavel T1 - Non-equilibrium dynamics of adsorbed polymers and filaments T1 - Nichtgleichgewichtsdynamik adsorbierter Polymere und Filamente N2 - In the present work, we discuss two subjects related to the nonequilibrium dynamics of polymers or biological filaments adsorbed to two-dimensional substrates. The first part is dedicated to thermally activated dynamics of polymers on structured substrates in the presence or absence of a driving force. The structured substrate is represented by double-well or periodic potentials. We consider both homogeneous and point driving forces. Point-like driving forces can be realized in single molecule manipulation by atomic force microscopy tips. Uniform driving forces can be generated by hydrodynamic flow or by electric fields for charged polymers. In the second part, we consider collective filament motion in motility assays for motor proteins, where filaments glide over a motor-coated substrate. The model for the simulation of the filament dynamics contains interactive deformable filaments that move under the influence of forces from molecular motors and thermal noise. Motor tails are attached to the substrate and modeled as flexible polymers (entropic springs), motor heads perform a directed walk with a given force-velocity relation. We study the collective filament dynamics and pattern formation as a function of the motor and filament density, the force-velocity characteristics, the detachment rate of motor proteins and the filament interaction. In particular, the formation and statistics of filament patterns such as nematic ordering due to motor activity or clusters due to blocking effects are investigated. Our results are experimentally accessible and possible experimental realizations are discussed. N2 - In der vorliegenden Arbeit behandeln wir zwei Probleme aus dem Gebiet der Nichtgleichgewichtsdynamik von Polymeren oder biologischen Filamenten, die an zweidimensionale Substrate adsorbieren. Der erste Teil befasst sich mit der thermisch aktivierten Dynamik von Polymeren auf strukturierten Substraten in An- oder Abwesenheit einer treibenden Kraft. Das strukturierte Substrat wird durch Doppelmulden- oder periodische Potentiale dargestellt. Wir betrachten sowohl homogene treibende Kräfte als auch Punktkräfte. Punktkräfte können bei der Manipulation einzelner Moleküle mit die Spitze eines Rasterkraftmikroskops realisiert werden. Homogene Kräfte können durch einen hydrodynamischen Fluss oder ein elektrisches Feld im Falle geladener Polymere erzeugt werden. Im zweiten Teil betrachten wir die kollektive Bewegung von Filamenten in Motility-Assays, in denen Filamente über ein mit molekularen Motoren überzogenes Substrat gleiten. Das Modell zur Simulation der Filamentdynamik beinhaltet wechselwirkende, deformierbare Filamente, die sich unter dem Einfluss von Kräften, die durch molekulare Motoren erzeugt werden, sowie thermischem Rauschen bewegen. Die Schaftdomänen der Motoren sind am Substrat angeheftet und werden als flexible Polymere (entropische Federn) modelliert. Die Kopfregionen der Motoren vollführen eine gerichtete Schrittbewegung mit einer gegebenen Kraft-Geschwindigkeitsbeziehung. Wir untersuchen die kollektive Filamentdynamik und die Ausbildung von Mustern als Funktion der Motor- und der Filamentdichte, der Kraft-Geschwindigkeitscharakteristik, der Ablöserate der Motorproteine und der Filamentwechselwirkung. Insbesondere wird die Bildung und die Statistik der Filamentmuster, wie etwa die nematische Anordnung aufgrund der Motoraktivität oder die Clusterbildung aufgrund von Blockadeeffekten, untersucht. Unsere Ergebnisse sind experimentell zugänglich und mögliche experimentelle Realisierungen werden diskutiert. KW - Polymere KW - Nichtgleichgewicht KW - Nichtgleichgewichts-Phasenübergang KW - Filament KW - Molekularer Motor KW - Motilität KW - Adsorption KW - thermisch aktivierte Dynamik KW - strukturierte Substrate KW - Motility-Assay KW - non-equilibrium dynamics KW - adsorption KW - polymers KW - filaments KW - motility assay KW - molecular motors KW - structured substrates KW - thermally activated dynamics Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5979 ER - TY - JOUR A1 - Ofomaja, Augustine Enakpodia A1 - Unuabonah, Emmanuel Iyayi T1 - Kinetics and time-dependent Langmuir modeling of 4-nitrophenol adsorption onto Mansonia sawdust JF - Journal of the Taiwan Institute of Chemical Engineers N2 - Often time's adsorption of large molecules onto untreated lignocellulosic materials is viewed as a two stage process and has frequently been characterized only by kinetic models while the rate limiting step of adsorption is determined only at various stages of the adsorption process. In this study the kinetics and the contribution of diffusion processes to 4-nitrophenol adsorption onto untreated sawdust was examined and the overall rate limiting step evaluated. The adsorption profile showed an initial rapid uptake of 4-nitrophenol which decreased and became almost constant after 5 min of contact. Analysis of the adsorption profile with the intraparticle diffusion equation and fractional 4-nitrophenol uptake with time showed that the profile can be divided into three different stages. The rate determining step of 4-nitrophenol adsorption was then evaluated based on the activation energies of each processes along with their activation parameters (Delta G*, Delta H* and Delta S*). The results revealed that external mass transfer was the overall rate limiting step with activation parameters E-a = 21.11, Delta H* = 23.75 and Delta S* = 144.97. Time dependent Langmuir modeling was carried out to optimize process parameters. (c) 2013 Taiwan Institute of Chemical Engineers. Published by Elsevier B.V. All rights reserved. KW - Untreated agricultural wastes KW - Activation parameters KW - Diffusion processes KW - Double exponential model KW - 4-Nitrophenol KW - Adsorption Y1 - 2013 U6 - https://doi.org/10.1016/j.jtice.2012.12.021 SN - 1876-1070 VL - 44 IS - 4 SP - 566 EP - 576 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Omorogie, Martins O. A1 - Babalola, Jonathan Oyebamiji A1 - Unuabonah, Emmanuel I. A1 - Song, Weiguo A1 - Gong, Jian Ru T1 - Efficient chromium abstraction from aqueous solution using a low-cost biosorbent: Nauclea diderrichii seed biomass waste JF - Journal of Saudi Chemical Society N2 - Toxic Cr(III) which poses environmental hazard to flora and fauna was efficiently abstracted by low-cost Nauclea diderrichii seed biomass (NDS) with good sequestral capacity for this metal was investigated in this study. The NDS surface analyses showed that it has a specific surface area of 5.36 m(2)/g and pHpzc of 4.90. Thermogravimetric analysis of NDS showed three consecutive weight losses from 50-200 degrees C (ca. 5%), 200-400 C (ca. 35%), >400 degrees C (ca. 10%), corresponding to external water molecules, structural water molecules and heat induced condensation reactions respectively. Differential thermogram of NDS presented a large endothermic peak between 20-510 degrees C suggesting bond breakage and dissociation with the ultimate release of small molecules. The experimental data showed kinetically fast biosorption with increased initial Cr(III) concentrations, indicating the role of external mass transfer mechanism as the rate controlling mechanism in this adsorption process. The Langmuir biosorption capacity of NDS was 483.81 mg/g. The use of the corrected Akaike Information Criterion tool for ranking equilibrium models suggested that the Freundlich model best described the experimental data, which is an indication of the heterogeneous nature of the active sites on the surface of NDS. N. diderrichii seed biomass is an easily sourced, cheap and environmental friendly biosorbent which will serve as a good and cost effective alternative to activated carbon for the treatment of polluted water and industrial effluents. (C) 2012 King Saud University. Production and hosting by Elsevier B.V. All rights reserved. KW - Biomass KW - Equilibrium KW - External mass transfer KW - Kinetics KW - Adsorption KW - Water Y1 - 2016 U6 - https://doi.org/10.1016/j.jscs.2012.09.017 SN - 1319-6103 SN - 2212-4640 VL - 20 SP - 49 EP - 57 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Shahinyan, A. A. A1 - Koetz, Joachim T1 - Self-assembled monolayer formation of distorted cylindrical AOT micelles on gold surfaces JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - Self-assembling features of sodium dioctyl sulfosuccinate (AOT) molecules and micelle adsorption on gold Au (111) surfaces have been examined using molecular dynamics simulation. We argue that AOT micelles display a strong adsorption on gold surfaces resulting in distorted cylindrical micelles attached to the (111) facets. The well protected Au(111) facets decorated by a dense packed elongated ellipsoidal AOT layer hinder the diffusion of the reactant to the (111) facets and could result in the preferential growth of ultra-thin gold nanoplatelets. KW - Surfactant micelles KW - Adsorption KW - Gold surface KW - Molecular dynamics Y1 - 2018 U6 - https://doi.org/10.1016/j.colsurfa.2018.02.067 SN - 0927-7757 SN - 1873-4359 VL - 546 SP - 20 EP - 27 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Scharf, Christina A1 - Weinelt, Ferdinand Anton A1 - Schroeder, Ines A1 - Paal, Michael A1 - Weigand, Michael A1 - Zoller, Michael A1 - Irlbeck, Michael A1 - Kloft, Charlotte A1 - Briegel, Josef A1 - Liebchen, Uwe T1 - Does the cytokine adsorber CytoSorb (R) reduce vancomycin exposure in critically ill patients with sepsis or septic shock? BT - a prospective observational study JF - Annals of intensive care N2 - Background: Hemadsorption of cytokines is used in critically ill patients with sepsis or septic shock. Concerns have been raised that the cytokine adsorber CytoSorb (R) unintentionally adsorbs vancomycin. This study aimed to quantify vancomycin elimination by CytoSorb (R) . Methods: Critically ill patients with sepsis or septic shock receiving continuous renal replacement therapy and CytoSorb (R) treatment during a prospective observational study were included in the analysis. Vancomycin pharmacokinetics was characterized using population pharmacokinetic modeling. Adsorption of vancomycin by the CytoSorb (R) was investigated as linear or saturable process. The final model was used to derive dosing recommendations based on stochastic simulations. Results: 20 CytoSorb (R) treatments in 7 patients (160 serum samples/24 during CytoSorb (R)-treatment, all continuous infusion) were included in the study. A classical one-compartment model, including effluent flow rate of the continuous hemodialysis as linear covariate on clearance, best described the measured concentrations (without CytoSorb (R)). Significant adsorption with a linear decrease during CytoSorb (R) treatment was identified (p <0.0001) and revealed a maximum increase in vancomycin clearance of 291% (initially after CytoSorb (R) installation) and a maximum adsorption capacity of 572 mg. For a representative patient of our cohort a reduction of the area under the curve (AUC) by 93 mg/L*24 h during CytoSorb (R) treatment was observed. The additional administration of 500 mg vancomycin over 2 h during CytoSorb (R) attenuated the effect and revealed a negligible reduction of the AUC by 4 mg/L*24h. Conclusion: We recommend the infusion of 500 mg vancomycin over 2 h during CytoSorb (R) treatment to avoid subtherapeutic concentrations. KW - Vancomycin KW - Critically ill patients KW - CytoSorb (R) KW - Sepsis; KW - Pharmacokinetics KW - Adsorption Y1 - 2022 U6 - https://doi.org/10.1186/s13613-022-01017-5 SN - 2110-5820 VL - 12 IS - 1 PB - Springer CY - Heidelberg ER - TY - THES A1 - Ulaganathan, Vamseekrishna T1 - Molecular fundamentals of foam fractionation T1 - Molekulare Grundlagen der Schaumfraktionierung N2 - Foam fractionation of surfactant and protein solutions is a process dedicated to separate surface active molecules from each other due to their differences in surface activities. The process is based on forming bubbles in a certain mixed solution followed by detachment and rising of bubbles through a certain volume of this solution, and consequently on the formation of a foam layer on top of the solution column. Therefore, systematic analysis of this whole process comprises of at first investigations dedicated to the formation and growth of single bubbles in solutions, which is equivalent to the main principles of the well-known bubble pressure tensiometry. The second stage of the fractionation process includes the detachment of a single bubble from a pore or capillary tip and its rising in a respective aqueous solution. The third and final stage of the process is the formation and stabilization of the foam created by these bubbles, which contains the adsorption layers formed at the growing bubble surface, carried up and gets modified during the bubble rising and finally ends up as part of the foam layer. Bubble pressure tensiometry and bubble profile analysis tensiometry experiments were performed with protein solutions at different bulk concentrations, solution pH and ionic strength in order to describe the process of accumulation of protein and surfactant molecules at the bubble surface. The results obtained from the two complementary methods allow understanding the mechanism of adsorption, which is mainly governed by the diffusional transport of the adsorbing protein molecules to the bubble surface. This mechanism is the same as generally discussed for surfactant molecules. However, interesting peculiarities have been observed for protein adsorption kinetics at sufficiently short adsorption times. First of all, at short adsorption times the surface tension remains constant for a while before it decreases as expected due to the adsorption of proteins at the surface. This time interval is called induction time and it becomes shorter with increasing protein bulk concentration. Moreover, under special conditions, the surface tension does not stay constant but even increases over a certain period of time. This so-called negative surface pressure was observed for BCS and BLG and discussed for the first time in terms of changes in the surface conformation of the adsorbing protein molecules. Usually, a negative surface pressure would correspond to a negative adsorption, which is of course impossible for the studied protein solutions. The phenomenon, which amounts to some mN/m, was rather explained by simultaneous changes in the molar area required by the adsorbed proteins and the non-ideality of entropy of the interfacial layer. It is a transient phenomenon and exists only under dynamic conditions. The experiments dedicated to the local velocity of rising air bubbles in solutions were performed in a broad range of BLG concentration, pH and ionic strength. Additionally, rising bubble experiments were done for surfactant solutions in order to validate the functionality of the instrument. It turns out that the velocity of a rising bubble is much more sensitive to adsorbing molecules than classical dynamic surface tension measurements. At very low BLG or surfactant concentrations, for example, the measured local velocity profile of an air bubble is changing dramatically in time scales of seconds while dynamic surface tensions still do not show any measurable changes at this time scale. The solution’s pH and ionic strength are important parameters that govern the measured rising velocity for protein solutions. A general theoretical description of rising bubbles in surfactant and protein solutions is not available at present due to the complex situation of the adsorption process at a bubble surface in a liquid flow field with simultaneous Marangoni effects. However, instead of modelling the complete velocity profile, new theoretical work has been started to evaluate the maximum values in the profile as characteristic parameter for dynamic adsorption layers at the bubble surface more quantitatively. The studies with protein-surfactant mixtures demonstrate in an impressive way that the complexes formed by the two compounds change the surface activity as compared to the original native protein molecules and therefore lead to a completely different retardation behavior of rising bubbles. Changes in the velocity profile can be interpreted qualitatively in terms of increased or decreased surface activity of the formed protein-surfactant complexes. It was also observed that the pH and ionic strength of a protein solution have strong effects on the surface activity of the protein molecules, which however, could be different on the rising bubble velocity and the equilibrium adsorption isotherms. These differences are not fully understood yet but give rise to discussions about the structure of protein adsorption layer under dynamic conditions or in the equilibrium state. The third main stage of the discussed process of fractionation is the formation and characterization of protein foams from BLG solutions at different pH and ionic strength. Of course a minimum BLG concentration is required to form foams. This minimum protein concentration is a function again of solution pH and ionic strength, i.e. of the surface activity of the protein molecules. Although at the isoelectric point, at about pH 5 for BLG, the hydrophobicity and hence the surface activity should be the highest, the concentration and ionic strength effects on the rising velocity profile as well as on the foamability and foam stability do not show a maximum. This is another remarkable argument for the fact that the interfacial structure and behavior of BLG layers under dynamic conditions and at equilibrium are rather different. These differences are probably caused by the time required for BLG molecules to adapt respective conformations once they are adsorbed at the surface. All bubble studies described in this work refer to stages of the foam fractionation process. Experiments with different systems, mainly surfactant and protein solutions, were performed in order to form foams and finally recover a solution representing the foamed material. As foam consists to a large extent of foam lamella – two adsorption layers with a liquid core – the concentration in a foamate taken from foaming experiments should be enriched in the stabilizing molecules. For determining the concentration of the foamate, again the very sensitive bubble rising velocity profile method was applied, which works for any type of surface active materials. This also includes technical surfactants or protein isolates for which an accurate composition is unknown. N2 - Die Fraktionierung ist ein Trennprozess, bei dem verschiedene Materialien auf Grund ihrer Eigenschaften voneinander getrennt werden. Bei der Sedimentation von Teilchen in einer Flüssigkeit dient deren unterschiedliche Dichte zu ihrer Trennung, da schwere Teilchen schneller auf den Boden des Gefäßes sinken als leichtere. Bei der Schaumfraktionierung als Trennprozess dient zur Trennung verschiedener Moleküle in einer Lösung deren Grenzflächenaktivität, d.h. das unterschiedliche Vermögen der Moleküle, sich an der Oberfläche von Gasblasen anzureichern. Durch das Aufsteigen der Blasen in der Flüssigkeit werden daher die Moleküle mit der höheren Grenzflächenaktivität stärker in der Schaumschicht angereichert als die weniger stark grenzflächenaktiven Komponenten. Ziel der vorliegenden Dissertation ist es, den Prozess der Schaumfraktionierung hinsichtlich der Trennung von grenzflächenaktiven Molekülen zu analysieren. Die Bildung von Blasen und deren anschließendes Aufsteigen in der Lösung kann als wichtigstes Element in diesem Prozess angesehen werden. Es ist bekannt, dass die Geschwindigkeit aufsteigender Luftblasen in Wasser eine charakteristische Größe ist, die durch die Anwesenheit grenzflächenaktiver Stoffe (Tenside, Proteine) stark verringert wird. Die vorliegende Dissertation zeigt für das ausgewählte Protein ß-Lactoglobulin und für verschiedene Lebensmittel-Tenside, dass die Messung der Aufstiegsgeschwindigkeit von Luftblasen zur Beurteilung der Anreicherung dieser Moleküle an der Blasenoberfläche ausgezeichnet geeignet ist. Die experimentellen Ergebnisse bei verschiedenen Lösungsbedingungen, wie Konzentration von Protein bzw. Tensid, pH-Wert und Ionenstärke der Lösung, zeigen deutlich, dass die Anreicherung der Proteinmoleküle wesentlich stärker ist als die von Tensiden. Dies gilt auch für Tenside mit einer sehr hohen Grenzflächenaktivität, was im Wesentlichen durch die extrem feste (nahezu irreversible) Anreicherung der Proteinmoleküle zu erklären ist. Die erzielten experimentellen Ergebnisse dienen jetzt als Grundlage für die Weiterentwicklung der Theorie aufsteigender Blasen, die besonders von der Dynamik der Anreicherung der Moleküle geprägt ist. Neueste Untersuchungen haben gezeigt, dass auf der Grundlage dieser experimentellen Ergebnisse erstmals die Geschwindigkeitskonstanten der Anreicherung (Adsorption und Desorption) unabhängig voneinander ermittelt werden können. KW - adsorption KW - air-water interface KW - protein KW - foam KW - rising bubble KW - Adsorption KW - Wasser/Luft Grenzflächen KW - steigende Blasen KW - Schaum KW - Beta-Lactoglobulin Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94263 ER - TY - THES A1 - Voß, Rebecca T1 - Mesoporous organosilica materials with amine functions : surface characteristics and chirality T1 - Mesoporöse Amin-funktionalisierte Organo-Silik ate : Oberflächen Eigenschaften und Chiralität N2 - In this work mesoporous organisilica materials are synthesized through the silica sol-gel process. For this a new class of precursors which are also surfactant are synthesized and self-assembled. This leads to a high surface area functionality which is analysized with copper (II) and water adsorption. N2 - Im Rahmen dieser Arbeit werden mesoporöse Amin-funktionalisierte Organo-Silikate durch den Silika Sol-Gel Prozess hergestellt. Dabei werden neue Alkoxysilyl-Precursoren synthetisiert und condensiert die die gewünschte Funktion auf die Oberfläche dirigieren. Herstellt werden primäre, secundäre und chirale Amine. Die Oberflächenfunktionalität wird mit Kupfer (II) und Wasser Adsorption analysiert. T2 - Mesoporous organosilica materials with amine functions : surface characteristics and chirality KW - Silicate KW - Chiralität KW - Adsorption KW - Poröser Stoff KW - Hydroborierung KW - Amine KW - Mesoporöse Materialien KW - Organo-Silikate KW - mesoporous materials KW - organosilica Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5287 ER -