TY - CHAP A1 - Balderjahn, Ingo ED - Boltz, Dirk-Mario ED - Bruhn, Manfred ED - Gröppel-Klein, Andrea ED - Hellmann, Kai-Uwe T1 - Anti-Consumption und Nachhaltigkeit T2 - Marke, Nachhaltigkeit und Verbraucherpolitik : Die Gewährleistungsmarke im Spannungsfeld zwischen Unternehmen, Konsumenten und Regulierung Y1 - 2022 SN - 978-3-7489-1271-2 SN - 978-3-8487-7261-2 U6 - https://doi.org/10.5771/9783748912712-29 SP - 29 EP - 40 PB - Nomos CY - Baden-Baden ER - TY - CHAP A1 - Balderjahn, Ingo A1 - Hedergott, Doreen A1 - Appenfeller, Dennis A1 - Peyer, Mathias ED - Baier, Daniel ED - Brusch, Michael T1 - Choice-Based Conjointanalyse T2 - Conjointanalyse N2 - Die auswahlbasierte oder auch Choice-Based Conjointanalyse (CBC) ist die derzeit wohl beliebteste Variante der Conjointanalyse. Gründe dafür bestehen einerseits in der leichten Verfügbarkeit benutzerfreundlicher Software (z.B. R, Sawtooth Software), andererseits weist das Verfahren aufgrund seiner Sonderstellung auch aus methodischer sowie praktischer Sicht Stärken auf. So werden bei einer CBC im Gegensatz zur bewertungsbasierten Conjointanalyse keine Präferenzurteile, sondern diskrete Entscheidungen der Auskunftspersonen erhoben und ausgewertet. Bei der CBC handelt es sich also genau genommen um eine Discrete Choice Analyse (DCA), die auf ein conjointanalytisches Erhebungsdesign angewandt wird. Beide Bezeichnungen werden nach wie vor verwendet, die Methodik wird in diesem Kapitel grundlegend und anhand eines Anwendungsbeispiels diskutiert. Y1 - 2021 SN - 978-3-662-63363-2 SN - 978-3-662-63364-9 U6 - https://doi.org/10.1007/978-3-662-63364-9_8 SP - 185 EP - 203 PB - Springer Gabler CY - Berlin ; Heidelberg ET - 2., überarbeitete und erweiterte ER - TY - CHAP A1 - Bender, Benedict A1 - Heine, Moreen ED - Kö, Andrea ED - Francesconi, Enrico ED - Kotsis, Gabriele ED - Tjoa, A. Min ED - Khalil, Ismail T1 - Government as a platform? BT - constitutive elements of public service platforms T2 - Electronic government and the information systems perspective N2 - Digital platforms, by their design, allow the coordination of multiple entities to achieve a common goal. Motivated by the success of platforms in the private sector, they increasingly receive attention in the public sector. However, different understandings of the platform concept prevail. To guide the development and further research a coherent understanding is required. To address this gap, we identify the constitutive elements of platforms in the public sector. Moreover, their potential to coordinate partially autonomous entities as typical for federal organized states is highlighted. This study contributes through a uniform understanding of public service platforms. Despite constitutive elements, the proposed framework for platforms in the public sector may guide future analysis. The analysis framework is applied to platforms of federal states in the European Union. KW - public service platforms KW - digital platforms KW - government as a platform KW - public sector KW - platform economy KW - federal states Y1 - 2021 SN - 978-3-030-86610-5 SN - 978-3-030-86611-2 U6 - https://doi.org/10.1007/978-3-030-86611-2_1 SP - 3 EP - 20 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Bender, Benedict A1 - Thim, Christof ED - Bender, Benedict T1 - Entering complementary markets on software platforms BT - the third-party perspective T2 - Platform coring on digital software platforms N2 - Software platforms regularly introduce new features to remain competitive. While platform innovation is considered to be a critical success factor, adding certain features could hurt the ecosystem. If platform owners provide functionality that was previously provided by a contributor, the owners enter complementary product spaces. Complementary market entry frequently occurs on software platforms and is a major concern for third-party developers. Divergent findings on the impact of complementary market entry call for the consideration of additional factors. As prior research neglected the third-party perspective, this contribution aims to address this gap. We explore the use of measures to prevent complementary market entry using a survey approach on browser platforms. The research model is tested with 655 responses among developer from Mozilla Firefox and Google Chrome. To explain countermeasures employment, developer’s attitude and perceived likelihood are important. The results reveal that developers employ countermeasures if complementary market entry is assessed negatively and perceived as likely for their extension. Differences among browser platforms concerning complementary market entry are identified. Product spaces of extensions being available on multiple platforms are less likely to be entered and more heavily protected. Implications for research and stakeholders, i.e. platform owners and contributors are discussed. KW - complementary market entry KW - third-party developer KW - digital platforms KW - software platforms KW - browser platforms KW - platform innovation Y1 - 2021 SN - 978-3-658-34798-7 SN - 978-3-658-34799-4 U6 - https://doi.org/10.1007/978-3-658-34799-4_7 SP - 149 EP - 199 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Bender, Benedict A1 - Thim, Christof A1 - Linke, Felix ED - Bender, Benedict T1 - Platform coring in the browser domain BT - an exploratory study T2 - Platform coring on digital software platforms N2 - Modern browsers are digital software platforms, as they allow third parties to extend functionality by providing extensions. In a highly competitive environment, differentiation through provided functionality is a key factor for browser platforms. As the development of browsers progress, new functions are constantly being released. Browsers could thus enter complementary markets by adding functionality previously provided by third-party extensions, which is referred to as ‘platform coring’. Previous studies have missed the perspective of the parties involved. To address this gap, we conducted interviews with third-party and core developers in the security and privacy domain from Firefox and Chrome. This study provides three contributions. First, insights into stakeholder-specific issues concerning coring. Second, measures to prevent coring. Third, strategical guidance for developers and owners. Third-party vendors experienced and core developers confirmed that coring occurs on browser platforms. While developers with extrinsic motivations assess coring negatively, developers with intrinsic motivations perceive coring positively. KW - platform coring KW - browser platforms KW - platform innovation KW - Firefox KW - Chrome Y1 - 2021 SN - 978-3-658-34798-7 SN - 978-3-658-34799-4 U6 - https://doi.org/10.1007/978-3-658-34799-4_6 SP - 119 EP - 148 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Brandenburger, Bonny A1 - Vladova, Gergana ED - Müller Werder, Claude ED - Erlemann, Jennifer T1 - Technology-enhanced learning in higher education BT - insights from a qualitative study on university-integrated makerspaces in six European countries T2 - Seamless Learning - lebenslanges, durchgängiges Lernen ermöglichen N2 - New technological applications such as Augmented Reality or Massive Open Online Courses (MOOCs) lead to alternative ways of learning. In order to be able to use this to its potential, the promotion of digital competencies “Digital Competence is the set of knowledge, skills, attitudes, abilities, strategies, and awareness that are required when using ICT and digital media to perform tasks; solve problems; communicate; manage information; collaborate; create and share content; and build knowledge effectively, efficiently, appropriately, critically, creatively, autonomously, flexibly, ethically, reflectively for work, le sure, participation, learning, and socialising.” (Ferrari, 2012). and a corresponding amount of practical "learning-by-doing" effects is required (cf. Ecker/Campbell 2019, p. 154). For this purpose, spaces and framework conditions must be created for application-based learning, which is also increasingly required by the employment market. In this context, we take a closer look at a new emerging subculture in university infrastructure called Maker Movement (MM). Our research work aims at investigating the pedagogical potential of particularly university-integrated makerspaces (MS) to enhance experiential learning with digital tools. To decode the innovative potential, we collected qualitative data from nine in-depth, semi-structured interviews with lab managers and researchers at European MS in six different countries. Y1 - 2020 SN - 978-3-8309-4244-3 SN - 978-3-8309-9244-8 U6 - https://doi.org/10.31244/9783830992448 SN - 1434-3436 SP - 27 EP - 37 PB - Waxmann CY - Münster ER - TY - CHAP A1 - Dunn, Malcolm H. A1 - Ganahl, Joseph P. ED - Hickmann, Thomas ED - Lederer, Markus T1 - Das Prinzip und System der modernen Armut T2 - Leidenschaft und Augenmaß : sozialwissenschaftliche Perspektiven auf Entwicklung, Verwaltung, Umwelt und Klima : Festschrift für Harald Fuhr Y1 - 2020 SN - 978-3-8487-5249-2 SN - 978-3-8452-9429-2 U6 - https://doi.org/10.5771/9783845294292-23 SP - 23 EP - 38 PB - Nomos CY - Baden-Baden ER - TY - CHAP A1 - Fischer, Caroline A1 - Proeller, Isabella A1 - Siegel, John A1 - Drathschmidt, Nicolas ED - Klenk, Tanja ED - Nullmeier, Frank ED - Wewer, Göttrik T1 - Virtuelle Teams und Homeoffice T2 - Handbuch Digitalisierung in Staat und Verwaltung N2 - Das Arbeiten im Homeoffice war in der deutschen öffentlichen Verwaltung vor der Covid-19 Pandemie kein verbreitetes Arbeitsmodell. Mit der Pandemie änderte sich die Situation unerwartet und womöglich auch nachhaltig. Vor dem Hintergrund unterschiedlicher Erfahrungen ist die Frage nicht mehr ob, sondern wie zukünftig in der Verwaltung mobil, flexibel und dezentral sowie in virtuellen Teams gearbeitet werden kann und soll. Dieser Beitrag untersucht diese Konzepte genauer, veranschaulicht deren praktische Anwendung und erörtert entsprechende Perspektiven für das zukünftige Arbeiten im öffentlichen Dienst. KW - Homeoffice KW - Corona KW - Telearbeit KW - Verwaltung KW - digitale Führung KW - flexible Arbeitsmodelle KW - virtuelle Führung Y1 - 2022 SN - 978-3-658-23669-4 U6 - https://doi.org/10.1007/978-3-658-23669-4_88-1 SP - 1 EP - 13 PB - Springer VS CY - Wiesbaden ER - TY - CHAP A1 - Gonnermann, Jana A1 - Brandenburger, Bonny A1 - Vladova, Gergana A1 - Gronau, Norbert ED - Bui, Tung X. T1 - To what extent can individualisation in terms of different types of mode improve learning outcomes and learner satisfaction? BT - a pre-study T2 - Proceedings of the 56th Annual Hawaii International Conference on System Sciences January 3-6, 2023 N2 - With the latest technological developments and associated new possibilities in teaching, the personalisation of learning is gaining more and more importance. It assumes that individual learning experiences and results could generally be improved when personal learning preferences are considered. To do justice to the complexity of the personalisation possibilities of teaching and learning processes, we illustrate the components of learning and teaching in the digital environment and their interdependencies in an initial model. Furthermore, in a pre-study, we investigate the relationships between the learner's ability to (digital) self-organise, the learner’s prior- knowledge learning in different variants of mode and learning outcomes as one part of this model. With this pre-study, we are taking the first step towards a holistic model of teaching and learning in digital environments. KW - advances in teaching and learning technologies KW - digital learning KW - digital teaching KW - experimental design KW - personalised learning KW - teaching and learning model Y1 - 2023 SN - 978-0-9981331-6-4 SP - 123 EP - 132 PB - Department of IT Management Shidler College of Business University of Hawaii CY - Honolulu, HI ER - TY - CHAP A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Modeling the handling of knowledge for Industry 4.0 T2 - Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5–7, 2021, Proceedings N2 - Industry 4.0, i.e. the connection of cyber-physical systems via the Internet in production and logistics, leads to considerable changes in the socio-technical system of the factory. The effects range from a considerable need for further training, which is exacerbated by the current shortage of skilled workers, to an opening of the previously inaccessible boundaries of the factory to third-party access, an increasing merging of office IT and manufacturing IT, and a new understanding of what machines can do with their data. This results in new requirements for the modeling, analysis and design of information processing and performance mapping business processes. In the past, procedures were developed under the name of “process-oriented knowledge management” with which the exchange and use of knowledge in business processes could be represented, analyzed and improved. However, these approaches were limited to the office environment. A method that makes it possible to document, analyze and jointly optimize the new possibilities of knowledge processing by using artificial intelligence and machine learning in production and logistics in the same way and in a manner compatible with the approach in the office environment does not exist so far. The extension of the modeling language KMDL, which is described in this paper, will contribute to close this research gap. This paper describes first approaches for an analysis and design method for a knowledge management integrating man and machine in the age of Industry 4.0. KW - 4th industrial revolution KW - knowledge management KW - business process management Y1 - 2021 SN - 978-3-030-79975-5 SN - 978-3-030-79976-2 U6 - https://doi.org/10.1007/978-3-030-79976-2_12 VL - 422 SP - 207 EP - 223 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Errors in the process of modeling business processes T2 - Business modeling and software design : 12th International Symposium, BMSD 2022, Fribourg, Switzerland, June 27–29, 2022, proceedings N2 - Process models are the basic ingredient for many attempts to improve business processes. The graphical depiction of otherwise not observable behavior in an enterprise is one of the most important techniques in the digital society. They help to enable decision making in the design of processes and workflows. Nevertheless it is not easy to correctly model business processes. Some approaches try to detect errors by an automated analysis of the process model. This contribution focuses on the creation of the first model from scratch. Which errors occur most frequently and how can these be avoided? KW - business process modeling KW - errors in modeling KW - process of modeling Y1 - 2022 SN - 978-3-031-11509-7 SN - 978-3-031-11510-3 SN - 978-3-031-11511-0 U6 - https://doi.org/10.1007/978-3-031-11510-3_13 VL - 453 SP - 221 EP - 229 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Gronau, Norbert ED - Freitag, Michael T1 - Modellieren des Umgangs mit Wissen für Industrie 4.0 T2 - Mensch-Technik-Interaktion in der digitalisierten Arbeitswelt Y1 - 2020 SN - 978-3-95545-353-4 U6 - https://doi.org/10.30844/wgab_2020 SP - 79 EP - 101 PB - GITO mbH Verlag CY - Berlin ER - TY - CHAP A1 - Gronau, Norbert ED - Roth, Stefan ED - Corsten, Hans T1 - Künstliche Intelligenz in der Produktionssteuerung T2 - Handbuch Digitalisierung Y1 - 2022 SN - 978-3-8006-6562-4 SN - 978-3-8006-6563-1 SP - 629 EP - 650 PB - Verlag Franz Vahlen CY - München ER - TY - CHAP A1 - Gronau, Norbert A1 - Rojahn, Marcel ED - Leupold, Andreas ED - Wiebe, Andreas ED - Glossner, Silke T1 - Das Industrial Internet of Things (IIOT) T2 - IT-Recht : Recht, Wirtschaft und Technik der digitalen Transformation Y1 - 2021 UR - https://beck-online.beck.de/Bcid/Y-400-W-LeupoldGlossnerHdbITR-GL-Teil10-1 SN - 978-3-406-74458-7 SP - 1115 EP - 1124 PB - C.H. Beck CY - München ET - 4., überarbeitet und erweitert ER - TY - CHAP A1 - Gronau, Norbert A1 - Teichmann, Malte A1 - Weber, Edzard ED - Shishkov, Boris T1 - Serious game-based haptic modeling BT - an application-oriented approach for sequentially developing new business models from tacit knowledge T2 - Business modeling and software design N2 - The authors propose that while tacit knowledge is a valuable resource for developing new business models, its externalization presents several challenges. One major challenge is that individuals often don’t recognize their tacit knowledge resources, while another is the reluctance to share one’s knowledge with others. Addressing these challenges, the authors present an application-oriented serious game-based haptic modeling approach for externalize tacit knowledge, which can be used to develop the first versions of business models based on tacit knowledge. Both conceptual and practical design fundamentals are presented based on elaborated theoretical approaches, which were developed with the help of a design science approach. The development of the research process is presented step by step, whereby we focused on the high accessibility of the presented research. Practitioners are presented with guidelines for implementing their serious game projects. Scientists benefit from starting points for their research topics of externalization, internalization, and socialization of tacit knowledge, development of business models, and serious games or gamification. The paper concludes with open research desiderata and questions from the presented research process. KW - serious game KW - tacit knowledge KW - business model KW - SECI-model KW - conversion sequences KW - design science Y1 - 2023 SN - 978-3-031-36756-4 U6 - https://doi.org/10.1007/978-3-031-36757-1_3 SP - 32 EP - 55 PB - Springer Nature CY - Cham ER - TY - CHAP A1 - Gronau, Norbert A1 - Weber, Edzard A1 - Wander, Paul A1 - Ullrich, André ED - Plapper, Peter T1 - A regional remanufacturing network approach BT - modeling and simulation of circular economy processes in the era of industry 4.0 T2 - Digitization of the work environment for sustainable production N2 - Manufacturing companies still have relatively few points of contact with the circular economy. Especially, extending life time of whole products or parts via remanufacturing is an promising approach to reduce waste. However, necessary cost-efficient assessment of the condition of the individual parts is challenging and assessment procedures are technically complex (e.g., scanning and testing procedures). Furthermore, these assessment procedures are usually only available after the disassembly process has been completed. This is where conceptualization, data acquisition and simulation of remanufacturing processes can help. One major constraining aspect of remanufacturing is reducing logistic efforts, since these also have negative external effects on the environment. Thus regionalization is an additional but in the end consequential challenge for remanufacturing. This article aims to fill a gap by providing an regional remanufacturing approach, in particular the design of local remanufacturing chains. Thereby, further focus lies on modeling and simulating alternative courses of action, including feasibility study and eco-nomic assessment. KW - regional network KW - remanufacturing KW - scenario modeling Y1 - 2022 SN - 978-3-95545-407-4 U6 - https://doi.org/10.30844/WGAB_2022_8 SP - 145 EP - 170 PB - GITO Verlag CY - Berlin ER - TY - CHAP A1 - Grum, Marcus ED - Shishkov, Boris T1 - Managing human and artificial knowledge bearers BT - the creation of a symbiotic knowledge management approach T2 - Business modeling and software design : 10th International Symposium, BMSD 2020, Berlin, Germany, July 6-8, 2020, Proceedings N2 - As part of the digitization, the role of artificial systems as new actors in knowledge-intensive processes requires to recognize them as a new form of knowledge bearers side by side with traditional knowledge bearers, such as individuals, groups, organizations. By now, artificial intelligence (AI) methods were used in knowledge management (KM) for knowledge discovery, for the reinterpreting of information, and recent works focus on the studying of different AI technologies implementation for knowledge management, like big data, ontology-based methods and intelligent agents [1]. However, a lack of holistic management approach is present, that considers artificial systems as knowledge bearers. The paper therefore designs a new kind of KM approach, that integrates the technical level of knowledge and manifests as Neuronal KM (NKM). Superimposing traditional KM approaches with the NKM, the Symbiotic Knowledge Management (SKM) is conceptualized furthermore, so that human as well as artificial kinds of knowledge bearers can be managed as symbiosis. First use cases demonstrate the new KM, NKM and SKM approaches in a proof-of-concept and exemplify their differences. KW - knowledge management KW - artificial intelligence KW - neuronal systems KW - design of knowledge-driven systems KW - symbiotic system design Y1 - 2020 SN - 978-3-030-52305-3 SN - 978-3-030-52306-0 U6 - https://doi.org/10.1007/978-3-030-52306-0_12 SP - 182 EP - 201 PB - Springer International Publishing AG CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Quantification of knowledge transfers BT - the design of an experiment setting for the examination of knowledge transfers T2 - Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5–7, 2021, Proceedings N2 - Faced with the triad of time-cost-quality, the realization of knowledge-intensive tasks at economic conditions is not trivial. Since the number of knowledge-intensive processes is increasing more and more nowadays, the efficient design of knowledge transfers at business processes as well as the target-oriented improvement of them is essential, so that process outcomes satisfy high quality criteria and economic requirements. This particularly challenges knowledge management, aiming for the assignment of ideal manifestations of influence factors on knowledge transfers to a certain task. Faced with first attempts of knowledge transfer-based process improvements [1], this paper continues research about the quantitative examination of knowledge transfers and presents a ready-to-go experiment design that is able to examine quality of knowledge transfers empirically and is suitable to examine knowledge transfers on a quantitative level. Its use is proven by the example of four influence factors, which namely are stickiness, complexity, competence and time pressure. KW - knowledge management KW - knowledge transfer KW - conversion KW - empirical examination KW - experiment Y1 - 2021 SN - 978-3-030-79975-5 SN - 978-3-030-79976-2 U6 - https://doi.org/10.1007/978-3-030-79976-2_13 VL - 422 SP - 224 EP - 242 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Adaptable knowledge-driven information systems improving knowledge transfers BT - design of context-sensitive, AR-enabled furniture assemblies T2 - Business modeling and software design : 10th International Symposium, BMSD 2020, Berlin, Germany, July 6-8, 2020, Proceedings N2 - A growing number of business processes can be characterized as knowledge-intensive. The ability to speed up the transfer of knowledge between any kind of knowledge carriers in business processes with AR techniques can lead to a huge competitive advantage, for instance in manufacturing. This includes the transfer of person-bound knowledge as well as externalized knowledge of physical and virtual objects. The contribution builds on a time-dependent knowledge transfer model and conceptualizes an adaptable, AR-based application. Having the intention to accelerate the speed of knowledge transfers between a manufacturer and an information system, empirical results of an experimentation show the validity of this approach. For the first time, it will be possible to discover how to improve the transfer among knowledge carriers of an organization with knowledge-driven information systems (KDIS). Within an experiment setting, the paper shows how to improve the quantitative effects regarding the quality and amount of time needed for an example manufacturing process realization by an adaptable KDIS. KW - augmented reality KW - knowledge transfers KW - empirical studies KW - context-aware computing KW - adaptable software systems KW - business process improvement Y1 - 2020 SN - 978-3-030-52305-3 SN - 978-3-030-52306-0 U6 - https://doi.org/10.1007/978-3-030-52306-0_13 VL - 391 SP - 202 EP - 220 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Kotarski, David A1 - Ambros, Maximilian A1 - Biru, Tibebu A1 - Krallmann, Hermann A1 - Gronau, Norbert ED - Shishkov, Boris T1 - Managing knowledge of intelligent systems BT - the design of a chatbot using domain-specific knowledge T2 - Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5–7, 2021, Proceedings N2 - Since more and more business tasks are enabled by Artificial Intelligence (AI)-based techniques, the number of knowledge-intensive tasks increase as trivial tasks can be automated and non-trivial tasks demand human-machine interactions. With this, challenges regarding the management of knowledge workers and machines rise [9]. Furthermore, knowledge workers experience time pressure, which can lead to a decrease in output quality. Artificial Intelligence-based systems (AIS) have the potential to assist human workers in knowledge-intensive work. By providing a domain-specific language, contextual and situational awareness as well as their process embedding can be specified, which enables the management of human and AIS to ease knowledge transfer in a way that process time, cost and quality are improved significantly. This contribution outlines a framework to designing these systems and accounts for their implementation. KW - domain-specific language KW - morphologic box KW - explainability Y1 - 2021 SN - 978-3-030-79975-5 SN - 978-3-030-79976-2 U6 - https://doi.org/10.1007/978-3-030-79976-2_5 VL - 422 SP - 78 EP - 96 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Thim, Christof A1 - Gronau, Norbert ED - Andersen, Ann-Louise ED - Andersen, Rasmus ED - Brunoe, Thomas Ditlev ED - Larsen, Maria Stoettrup Schioenning ED - Nielsen, Kjeld ED - Napoleone, Alessia ED - Kjeldgaard, Stefan T1 - Aiming for knowledge-transfer-optimizing intelligent cyber-physical systems T2 - Towards sustainable customization : cridging smart products and manufacturing systems N2 - Since more and more production tasks are enabled by Industry 4.0 techniques, the number of knowledge-intensive production tasks increases as trivial tasks can be automated and only non-trivial tasks demand human-machine interactions. With this, challenges regarding the competence of production workers, the complexity of tasks and stickiness of required knowledge occur [1]. Furthermore, workers experience time pressure which can lead to a decrease in output quality. Cyber-Physical Systems (CPS) have the potential to assist workers in knowledge-intensive work grounded on quantitative insights about knowledge transfer activities [2]. By providing contextual and situational awareness as well as complex classification and selection algorithms, CPS are able to ease knowledge transfer in a way that production time and quality is improved significantly. CPS have only been used for direct production and process optimization, knowledge transfers have only been regarded in assistance systems with little contextual awareness. Embedding production and knowledge transfer optimization thus show potential for further improvements. This contribution outlines the requirements and a framework to design these systems. It accounts for the relevant factors. KW - smart automation KW - smart production KW - human-machine-interaction Y1 - 2021 SN - 978-3-030-90699-3 SN - 978-3-030-90700-6 SN - 978-3-030-90702-0 U6 - https://doi.org/10.1007/978-3-030-90700-6_16 SP - 149 EP - 157 PB - Springer CY - Cham ER - TY - CHAP A1 - Haase, Jennifer A1 - Thim, Christof A1 - Bender, Benedict ED - Marrella, Andrea ED - Weber, Barbara T1 - Expanding modeling notations BT - requirements for creative process modeling T2 - Business process management workshops N2 - Creativity is a common aspect of business processes and thus needs a proper representation through process modeling notations. However, creative processes constitute highly flexible process elements, as new and unforeseeable outcome is developed. This presents a challenge for modeling languages. Current methods representing creative-intensive work are rather less able to capture creative specifics which are relevant to successfully run and manage these processes. We outline the concept of creative-intensive processes and present an example from a game design process in order to derive critical process aspects relevant for its modeling. Six aspects are detected, with first and foremost: process flexibility, as well as temporal uncertainty, experience, types of creative problems, phases of the creative process and individual criteria. By first analyzing what aspects of creative work modeling notations already cover, we further discuss which modeling extensions need to be developed to better represent creativity within business processes. We argue that a proper representation of creative work would not just improve the management of those processes, but can further enable process actors to more efficiently run these creative processes and adjust them to better fit to the creative needs. KW - modeling KW - requirements KW - pockets of creativity KW - creative process Y1 - 2022 SN - 978-3-030-94342-4 SN - 978-3-030-94344-8 SN - 978-3-030-94343-1 U6 - https://doi.org/10.1007/978-3-030-94343-1_15 VL - 436 SP - 197 EP - 208 PB - Springer CY - Cham ER - TY - CHAP A1 - Heuberger, Moritz ED - Klenk, Tanja ED - Nullmeier, Frank ED - Wewer, Göttrik T1 - Digitaler Organisationswandel T2 - Handbuch Digitalisierung in Staat und Verwaltung N2 - In diesem Artikel werden die Voraussetzungen für eine erfolgreiche Digitalisierung der öffentlichen Verwaltung diskutiert. Dabei liegt der Fokus auf den internen Verwaltungsprozessen sowie auf der Kommunikation und Koordination innerhalb und zwischen Behörden. Zur richtigen Anlage eines digitalen Organisationswandels sind vor allem das Personalmanagement, die Organisationsform des Veränderungsprozesses sowie der Technologieeinsatz von zentraler Bedeutung. Y1 - 2020 SN - 978-3-658-23667-0 SN - 978-3-658-23668-7 U6 - https://doi.org/10.1007/978-3-658-23668-7_54 N1 - Zweitveröffentlichung mit DOI 10.1007/978-3-658-23669-4_54-1 als Teil eines "Living reference work entry" SP - 587 EP - 598 PB - Springer CY - Wiesbaden ER - TY - CHAP A1 - Höchenberger, Ralf A1 - Hummel, Detlev A1 - Seitz, Jürgen ED - Sharma, Neha ED - Goje, Amol ED - Chakrabarti, Amlan ED - Bruckstein, Alfred M. T1 - Do women shy away from cryptocurrency investment? BT - cross-country evidence from survey data T2 - Data management, analytics and innovation N2 - This study utilizes cross-country survey data to analyze differences in attitudes toward cryptocurrency as an alternative to traditional money issued by a central bank. Particularly, we investigate women’s general attitude toward cryptocurrency systems. Results suggest that women invest less into cryptocurrency, show less interest in the future cryptocurrency investment, and see less economic potential in these systems than men do. Further evidence shows that these attitudes are directly connected with lower literacy in cryptocurrency systems. These findings support theory on gender differences in investment behavior. We contribute to the existing literature by conducting a cross-country survey on cryptocurrency attitudes in Europe and Asia, and hence show that this gender effect is robust across these cultures. KW - cryptocurrencies KW - bitcoin KW - financial literacy KW - gender gap KW - risk tolerance Y1 - 2023 SN - 978-981-99-1413-5 SN - 978-981-99-1414-2 U6 - https://doi.org/10.1007/978-981-99-1414-2_6 SP - 69 EP - 76 PB - Springer Nature CY - Singapore ER - TY - CHAP A1 - Hölzle, Katharina A1 - Tiberius, Victor ED - Hölzle, Katharina ED - Tiberius, Victor ED - Surrey, Heike T1 - Aspekte, Standpunkte und Ausblicke BT - Perspektiven des Entrepreneurships T2 - Perspektiven des Entrepreneurships : Unternehmerische Konzepte zwischen Theorie und Praxis Y1 - 2020 UR - https://www.wiso-net.de/document/SPEB__80ed5110e71fb95c3b3bfc1ebb8fa2cd6e141477 SN - 978-3-7910-4473-6 SN - 978-3-7910-4471-2 SN - 978-3-7910-4472-9 SP - 13 EP - 17 PB - Schäffer-Poeschel Verlag CY - Stuttgart ER - TY - CHAP A1 - Lamprecht, Selma A1 - Vladova, Gergana ED - Rüdiger, Thomas-Gabriel ED - Bayerl, Petra Saskia T1 - Cyber-Viktimisierung von Unternehmen T2 - Cyberkriminologie N2 - Viktimologie als die Erforschung von Kriminalitätsopfern war lange Zeit auf „street crimes“ fokussiert. Inzwischen gibt es Opfertypologien und -betrachtungen für eine Vielzahl weiterer Delikte – jedoch bleibt der Fokus nach wie vor auf menschlichen Opfern. Gerade mit Blick auf neue digitale Angriffsformen werden Unternehmen allerdings als Opfer immer interessanter und – unter dem Stichwort Cybersecurity – stellen als Forschungsobjekt verstärkt neue Anforderungen. Diese Entwicklung läuft weitgehend unabhängig von der Viktimologie; Bezüge zur klassischen Opferforschung werden kaum hergestellt. Dieses Kapitel widmet sich dieser Lücke, indem es existierende Forschungsansätze zu Unternehmen als Opfer von Cybercrime anhand viktimologischer Schemata und Fragestellungen einordnet. Weiterhin wird mit dem Verständnis von Unternehmen und Individuen als Systeme eine Vorgehensweise skizziert, um bestehende Ansätze aus der Viktimologie auf die Betrachtung von Unternehmen als Opfer anzupassen und zu übertragen. Y1 - 2020 SN - 978-3-658-28506-7 SN - 978-3-658-28507-4 U6 - https://doi.org/10.1007/978-3-658-28507-4_14 SP - 345 EP - 371 PB - Springer VS CY - Wiesbaden ER - TY - CHAP A1 - Langemeyer, Ines A1 - Gronau, Norbert A1 - Schmid-Walz, Sabrina A1 - Kotarski, David A1 - Reimann, Daniela A1 - Teichmann, Malte T1 - From employee to expert BT - towards a corona-sensitive approach for data collection T2 - 2021 Crossing Boundaries Muttenz/Basel and Bern : 4th International VET Conference Crossing Boundaries 8 to 9 April 2021, online, Muttenz and Bern, Switzerland N2 - In the context of the collaborative project Ageing-appropriate, process-oriented and interactive further training in SME (API-KMU), innovative solutions for the challenges of demographic change and digitalisation are being developed for SMEs. To this end, an approach to age-appropriate training will be designed with the help of AR technology. In times of the corona pandemic, a special research design is necessary for the initial survey of the current state in the companies, which will be systematically elaborated in this paper. The results of the previous methodological considerations illustrate the necessity of a mix of methods to generate a deeper insight into the work processes. Video-based retrospective interviews seem to be a suitable instrument to adequately capture the employees' interpretative perspectives on their work activities. In conclusion, the paper identifies specific challenges, such as creating acceptance among employees, open questions, e.g., how a transfer or generalization of the results can succeed, and hypotheses that will have to be tested in the further course of the research process. KW - cross self-confrontation KW - recording of workplaces KW - corona-sensitive data collection KW - age-appropriate vocational training KW - augmented reality Y1 - 2021 U6 - https://doi.org/10.5281/zenodo.4590196 SP - 226 EP - 231 ER - TY - CHAP A1 - Mishra, Vidisha A1 - Vladova, Gergana ED - Miller, Katharina ED - Wendt, Karen T1 - It’s personal BT - 4IR and the future of learning T2 - The fourth industrial revolution and its impact on ethics N2 - The new technologies of the Fourth Industrial Revolution (4IR) are disrupting traditional models of work and learning. While the impact of digitalization on education was already a point of serious deliberation, the COVID-19 pandemic has expedited ongoing transitions. With 90% of the world’s student population having been impacted by national lockdowns—online learning has gone from being a luxury to a necessity, in a context where around 3.6 billion people are offline. As the impacts of the 4IR unfold alongside the current crisis, it is not enough for future policy pathways to prioritize educational attainment in the traditional sense; it is essential to reimagine education itself as well as its delivery entirely. Future policy narratives will need to evaluate the very process of learning and identify the ways in which technology can help reduce existing disparities and enhance digital access, literacy and fluency in a scalable manner. In this context, this chapter analyses the status quo of online learning in India and Germany. Drawing on the experiences of these two economies with distinct trajectories of digitalization, the chapter explores how new technologies intersect with traditional education and local sociocultural conditions. Further, the limitations and opportunities presented by dominant ed-tech models is critically analyzed against the ongoing COVID-19 pandemic. KW - 4IR KW - digital KW - online KW - gender KW - automation KW - inequality Y1 - 2021 SN - 978-3-030-57019-4 SN - 978-3-030-57020-0 U6 - https://doi.org/10.1007/978-3-030-57020-0_12 SP - 151 EP - 158 PB - Springer CY - Cham ER - TY - CHAP A1 - Proeller, Isabella A1 - Drathschmidt, Nicolas A1 - Adam, Jan P. T1 - Coronitalization BT - Effekte der Corona-Pandemie auf die Digitalisierung der Verwaltung T2 - Handbuch Digitalisierung der Verwaltung N2 - Nach mehreren Jahren weltweiter Pandemie ist deutlich geworden, dass Corona Verwaltungshandeln in erheblichem Maße beeinflusst und bestimmt hat. Dieser Beitrag fasst die Forschung und empirischen Erkenntnisse zur Verwaltungsdigitalisierung während der Corona-Pandemie in Deutschland thematisch zusammen. Dabei wird untersucht, inwiefern die Kontaktbeschränkungen und Infektionsschutzmaßnahmen die Digitalisierungsvorhaben in der öffentlichen Verwaltung beeinflusst und vorangebracht haben. Insgesamt ist von einem Schub für die Digitalisierung durch die Corona-Pandemie auszugehen. Eine solche Coronitalization äußerte sich vor allem in verstärkten Investitionen in IKT und E-Services und der vermehrten Abkehr von analogen Prozessen sowie dem Einsatz flexibler Arbeitsmodelle, wie dem Homeoffice, unter Zuhilfenahme digitaler Infrastruktur. KW - Corona KW - Digitalisierung KW - Verwaltung KW - Transformation KW - E-Government Y1 - 2023 SN - 978-3-82525-929-7 SN - 978-3-83855-929-2 U6 - https://doi.org/10.36198/9783838559292 SP - 34 EP - 55 PB - transcript CY - Bielefeld ER - TY - CHAP A1 - Proeller, Isabella A1 - Siegel, John ED - Schedler, Kuno T1 - 'Tools' in public management BT - how efficiency and effectiveness are thought to be controlled T2 - Elgar encyclopedia of public management N2 - Tools are methods or procedures, and thus operational patterns of action, applied in public administrations to solve standard problems. It is also possible to consider them as structured communication according to professional standards aiming at complexity reduction. Regularly, tools in management stem on a deductive-synoptic rationale offering a seemingly ‘objective’ decision basis. They have a strong formative influence on the organization, regularly also beyond the intended effects. The prominence of tools is sometimes confused with management as such, e.g. introducing tools is mistaken as equivalent to managing for a particular purpose. However, tools have to be closely and carefully managed regarding the objectives and purposes they should serve. KW - cost cutting KW - instruments KW - methods KW - tools KW - zero-based budgeting Y1 - 2022 SN - 978-1-80037-548-2 SN - 978-1-80037-549-9 U6 - https://doi.org/10.4337/9781800375499.tools SP - 186 EP - 190 PB - Edward Elgar Publishing CY - Cheltenham ER - TY - CHAP A1 - Proeller, Isabella A1 - Siegel, John Philipp A1 - Adam, Jan P. ED - Corsten, Hans ED - Roth, Stefan T1 - Digitalisierung der öffentlichen Verwaltung T2 - Handbuch Digitalisierung Y1 - 2021 SN - 978-3-8006-6562-4 SN - 978-3-8006-6563-1 SP - 1099 EP - 1120 PB - Franz Vahlen CY - München ER - TY - CHAP A1 - Rojahn, Marcel A1 - Ambros, Maximilian A1 - Biru, Tibebu A1 - Krallmann, Hermann A1 - Gronau, Norbert A1 - Grum, Marcus ED - Rutkowski, Leszek ED - Scherer, Rafał ED - Korytkowski, Marcin ED - Pedrycz, Witold ED - Tadeusiewicz, Ryszard ED - Zurada, Jacek M. T1 - Adequate basis for the data-driven and machine-learning-based identification T2 - Artificial intelligence and soft computing N2 - Process mining (PM) has established itself in recent years as a main method for visualizing and analyzing processes. However, the identification of knowledge has not been addressed adequately because PM aims solely at data-driven discovering, monitoring, and improving real-world processes from event logs available in various information systems. The following paper, therefore, outlines a novel systematic analysis view on tools for data-driven and machine learning (ML)-based identification of knowledge-intensive target processes. To support the effectiveness of the identification process, the main contributions of this study are (1) to design a procedure for a systematic review and analysis for the selection of relevant dimensions, (2) to identify different categories of dimensions as evaluation metrics to select source systems, algorithms, and tools for PM and ML as well as include them in a multi-dimensional grid box model, (3) to select and assess the most relevant dimensions of the model, (4) to identify and assess source systems, algorithms, and tools in order to find evidence for the selected dimensions, and (5) to assess the relevance and applicability of the conceptualization and design procedure for tool selection in data-driven and ML-based process mining research. KW - data mining KW - knowledge engineering KW - various applications Y1 - 2023 SN - 978-3-031-42504-2 SN - 978-3-031-42505-9 U6 - https://doi.org/10.1007/978-3-031-42505-9_48 SP - 570 EP - 588 PB - Springer CY - Cham ER - TY - CHAP A1 - Schwab, Christian A1 - Bogumil, Jörg A1 - Kuhlmann, Sabine A1 - Gerber, Sascha T1 - Digitalisierung von Verwaltungsleistungen in Bürgerämtern T2 - Handbuch Digitalisierung in Staat und Verwaltung N2 - Die Digitalisierung der öffentlichen Leistungserbringung für die Bürger bildet gegenwärtig einen Schwerpunkt der Modernisierungsaktivitäten in Staat und Verwaltung. Hinsichtlich der digitalen Informationsbereitstellung hat es zwar deutliche Fortschritte gegeben, insgesamt zeigt sich jedoch eine allenfalls moderate „E-Government-Performanz“ bei der digitalen Kommunikation zwischen Verwaltung und Bürgern sowie bei Transaktionen, d. h. der medienbruchfreien Abschließbarkeit von Verwaltungsvorgängen. Als wesentliche Gründe für die ernüchternde Bilanz der lokalen Verwaltungsdigitalisierung sind neben technischen, rechtlichen, finanziellen und personellen Barrieren insbesondere politische und institutionelle Hürden zu nennen. Viele Probleme sind zudem auch bei E-Government-Funktionen (z. B. der Online-Formulare oder elektronischen Bezahlmöglichkeiten) zu verzeichnen. Positiv schneidet dagegen die elektronische Terminvergabe ab, die in den Bürgerämtern zu wesentlichen Prozess- und Serviceverbesserungen geführt hat. Allerdings sind neben positiven Effekten, wie beispielsweise schnelleren Bearbeitungszeiten und kürzeren Wartezeiten, auch dysfunktionale Digitalisierungseffekte zu verzeichnen, wie erhöhter Arbeitsstress aufgrund eines gestiegenen Kommunikationsaufkommens (v. a. durch Email) und der damit einhergehenden Verlagerung des Arbeitsaufkommens vom Frontoffice ins Backoffice. Y1 - 2020 SN - 978-3-658-23667-0 SN - 978-3-658-23668-7 U6 - https://doi.org/10.1007/978-3-658-23668-7 SP - 437 EP - 448 PB - Springer CY - Wiesbaden ER - TY - CHAP A1 - Siegel, John A1 - Proeller, Isabella ED - Schedler, Kuno T1 - Strategic management in public administration T2 - Elgar encyclopedia of public management N2 - Strategic management is the deliberate engagement of an administration with the challenges of fulfilling its mission and ensuring and improving its ability to act by clarifying measures of success, an understanding of how to influence patterns of action, and organiza-tional learning. In this respect, it is not just about planning, but about an understanding of the emerging strategies of the administration in fulfilling its tasks and the use of opportunities for performance improvement, taking into account stakeholder expectations, resource base and organizational capabilities. KW - strategy KW - performance KW - leadership KW - change KW - digitalization Y1 - 2022 SN - 978-1-80037-548-2 SN - 978-1-80037-549-9 U6 - https://doi.org/10.4337/9781800375499.strategic SP - 302 EP - 306 PB - Edward Elgar Publishing CY - Cheltenham ER - TY - CHAP A1 - Teichmann, Malte A1 - Busse, Jana A1 - Gonnermann, Jana A1 - Reimann, Daniela A1 - Ritterbusch, Georg David A1 - Langemeyer, Ines A1 - Gronau, Norbert ED - Nitsch, Verena ED - Brandl, Christopher ED - Häußling, Roger ED - Roth, Philip ED - Gries, Thomas ED - Schmenk, Bernhard T1 - Konzeption, Erstellung und Evaluation von VR-Räumen für die betriebliche Weiterbildung in KMU BT - Erfahrungen und Handlungsempfehlungen aus dem Forschungsprojekt API-KMU T2 - Digitalisierung der Arbeitswelt im Mittelstand 3 N2 - Der Beitrag adressiert die Erstellung von Virtual-Reality gestützten (Lehr- und Lern-) Räumen für die betriebliche Weiterbildung im Rahmen eines Forschungsprojektes. Der damit verbundene Konzeptions- und Umsetzungsprozess ist mit verschiedenen Herausforderungen verbunden: einerseits ist Virtual-Reality ein vergleichsweise neues Lehr- und Lernmedium, womit wenig praktische Handreichungen zur praktischen Umsetzung existieren. Andererseits existieren theoretisch-konzeptionelle Ansätze zur Gestaltung digitaler Lehr- und Lernarrangements, die jedoch 1) oft Gefahr laufen, an den realen Bedürfnissen der Praxis „vorbei“ zu gehen und 2) zumeist nicht konkret Virtual-Reality bzw. damit verbundene Lehr- und Lernumgebungen adressieren. In dieser Folge sind Best-Practice Beispiele basierend auf erfolgreichen Umsetzungsvorhaben, die nachfolgenden Projekten als „Wegweiser“ dienen könnten, äußerst rar. Der Beitrag setzt an dieser Stelle an: basierend auf zwei real existierenden betrieblichen Anwendungsfällen aus den Bereichen Natursteinbearbeitung sowie Einzel- und Sondermaschinenbau werden Herausforderungen und Lösungswege des Erstellungsprozesses von Virtual-Reality gestützten (Lehr- und Lern-)Räumen beschrieben. Ebenfalls werden basierend auf den gemachten Projekterfahrungen Handlungsempfehlungen für die gelingende Konzeption, Umsetzung und Evaluation dieser Räume formuliert. Betriebliche Beschäftigte aus den Bereichen Aus- und Weiterbildung, Management oder Human Ressources, die in eigenen Projekten im Bereich Virtual Reality aktiv werden wollen, profitieren von den herausgestellten praktischen Handreichungen. Forschende Personen sollen Anregungen für weiterführende Forschungsvorhaben erhalten. Y1 - 2023 SN - 978-3-662-67023-1 SN - 978-3-662-67024-8 U6 - https://doi.org/10.1007/978-3-662-67024-8_5 SP - 155 EP - 204 PB - Springer Vieweg CY - Berlin ER - TY - CHAP A1 - Teichmann, Malte A1 - Lass, Sander A1 - Ullrich, André A1 - Gronau, Norbert ED - Weber, Kristin ED - Reinheimer, Stefan T1 - Modellfabriken als Enabler flexibler Lehr- und Lernsituationen für die Kompetenzentwicklung im Fabrikkontext BT - die Lernfabrik des Zentrums Industrie 4.0 Potsdam T2 - Faktor Mensch N2 - Dieses Kapitel diskutiert die Notwendigkeit einer stärkeren Praxisorientierung für die Schaffung konkreter Lehr- und Lernräume in Unternehmen und zeigt die Vorteile einer Lernfabrik vor dem Hintergrund der stattfindenden Digitalisierung als Mittel zur Kompetenzentwicklung auf. Die technologiebedingt erweiterten Weiterbildungsziele erfordern die Nutzung geeigneter Konzepte und Lösungen. Dahingehend erfolgt die zielorientierte Konkretisierung der Kreation geeigneter Lehr- und Lernsituationen. Die Darstellung der Nutzbarmachung einer Modellfabrik als Lernfabrik der betrieblichen Weiterbildungspraxis zeigt nicht nur eine Lösung für die intendierte Bereitstellung flexibler Lehr- und Lernsituationen, sondern liefert ebenso Handlungsempfehlungen und Best-Practices für die erfolgreiche Kompetenzentwicklung. Insbesondere Praktiker profitieren von der Darstellung der Lernfabrik: aus dieser können sowohl betriebliche Weiterbildner als auch Geschäftsverantwortliche Implikationen für die didaktische Transformation betrieblicher Arbeitsorte in betriebliche Lern-Orte ableiten. Die detaillierte Darstellung einer Tagesschulung zum Thema Auswirkungen von Industrie 4.0 auf die Arbeit der Mitarbeiter sowie Illustration eines Lernszenarios geben reale Einblicke, wie betriebliche Weiterbildung abseits von Lehr-Lern-Kurzschluss-orientierter Didaktik gelingt. KW - betriebliche Weiterbildung KW - Digitalisierung KW - Modellfabrik KW - Lehr-Lernsituationen KW - Industrie 4.0 KW - Zentrum Industrie 4.0 Y1 - 2022 SN - 978-3-658-34523-5 SN - 978-3-658-34524-2 U6 - https://doi.org/10.1007/978-3-658-34524-2_10 N1 - vollständig überarbeiteter und erweiterter Beitrag basierend auf dem Artikel „Herausforderungen und Handlungsempfehlungen betrieblicher Weiterbildungspraxis in Zeiten der Digitalisierung“ von Malte Teichmann, André Ullrich, Julian Wenz, Norbert Gronau, HMD Heft 333, Stefan Reinheimer, Kristin Weber (Hrsg.): Faktor Mensch, Juni 2020, S. 512–527. SP - 173 EP - 196 PB - Springer Fachmedien CY - Wiesbaden ER - TY - CHAP A1 - Thim, Christof A1 - Gronau, Norbert A1 - Haase, Jennifer A1 - Grum, Marcus A1 - Schüffler, Arnulf A1 - Roling, Wiebke A1 - Kluge, Annette ED - Shishkov, Boris T1 - Modeling change in business processes T2 - Business modeling and software design N2 - Business processes are regularly modified either to capture requirements from the organization’s environment or due to internal optimization and restructuring. Implementing the changes into the individual work routines is aided by change management tools. These tools aim at the acceptance of the process by and empowerment of the process executor. They cover a wide range of general factors and seldom accurately address the changes in task execution and sequence. Furthermore, change is only framed as a learning activity, while most obstacles to change arise from the inability to unlearn or forget behavioural patterns one is acquainted with. Therefore, this paper aims to develop and demonstrate a notation to capture changes in business processes and identify elements that are likely to present obstacles during change. It connects existing research from changes in work routines and psychological insights from unlearning and intentional forgetting to the BPM domain. The results contribute to more transparency in business process models regarding knowledge changes. They provide better means to understand the dynamics and barriers of change processes. KW - intentional forgetting KW - routines KW - business processes KW - unlearning Y1 - 2023 SN - 978-3-031-36756-4 SN - 978-3-031-36757-1 U6 - https://doi.org/10.1007/978-3-031-36757-1_1 SP - 3 EP - 17 PB - Springer Nature CY - Cham ER - TY - CHAP A1 - Thim, Christof A1 - Grum, Marcus A1 - Schüffler, Arnulf A1 - Roling, Wiebke A1 - Kluge, Annette A1 - Gronau, Norbert ED - Andersen, Ann-Louise ED - Andersen, Rasmus ED - Brunoe, Thomas Ditlev ED - Larsen, Maria Stoettrup Schioenning ED - Nielsen, Kjeld ED - Napoleone, Alessia ED - Kjeldgaard, Stefan T1 - A concept for a distributed Interchangeable knowledge base in CPPS T2 - Towards sustainable customization: cridging smart products and manufacturing systems N2 - As AI technology is increasingly used in production systems, different approaches have emerged from highly decentralized small-scale AI at the edge level to centralized, cloud-based services used for higher-order optimizations. Each direction has disadvantages ranging from the lack of computational power at the edge level to the reliance on stable network connections with the centralized approach. Thus, a hybrid approach with centralized and decentralized components that possess specific abilities and interact is preferred. However, the distribution of AI capabilities leads to problems in self-adapting learning systems, as knowledgebases can diverge when no central coordination is present. Edge components will specialize in distinctive patterns (overlearn), which hampers their adaptability for different cases. Therefore, this paper aims to present a concept for a distributed interchangeable knowledge base in CPPS. The approach is based on various AI components and concepts for each participating node. A service-oriented infrastructure allows a decentralized, loosely coupled architecture of the CPPS. By exchanging knowledge bases between nodes, the overall system should become more adaptive, as each node can “forget” their present specialization. KW - learning KW - distributed knowledge base KW - artificial intelligence KW - CPPS Y1 - 2021 SN - 978-3-030-90699-3 SN - 978-3-030-90702-0 SN - 978-3-030-90700-6 U6 - https://doi.org/10.1007/978-3-030-90700-6_35 SP - 314 EP - 321 PB - Springer CY - Cham ER - TY - CHAP A1 - Tiberius, Victor ED - Hölzle, Katharina ED - Tiberius, Victor ED - Surrey, Heike T1 - Traits, Kognition, Kompetenzen, Verhalten? BT - Erfolgsdeterminanten im Entrepreneurship T2 - Perspektiven des Entrepreneurships : Unternehmerische Konzepte zwischen Theorie und Praxis Y1 - 2020 UR - https://www.wiso-net.de/document/SPEB__80ed5110e71fb95c3b3bfc1ebb8fa2cd6e141477 SN - 978-3-7910-4473-6 SN - 978-3-7910-4471-2 SN - 978-3-7910-4472-9 SP - 21 EP - 31 PB - Schäffer-Poeschel Verlag CY - Stuttgart ER - TY - CHAP A1 - Ullrich, André A1 - Gronau, Norbert ED - Panetto, Hervé ED - Madani, Kurosh ED - Smirnov, Alexander T1 - Time to change BT - considering the 4th Industrial Revolution from three sustainability perspectives T2 - Proceedings of the International Conference on Innovative Intelligent Industrial Production and Logistics N2 - Industry 4.0 leads to a radical change that is progressing incrementally. The new information and communication technologies provide many conceivable opportunities for their application in the context of sustainable corporate management. The combination of new digital technologies with the ecological and social goals of companies offers a multitude of unimagined potentials and challenges. Although companies already see the need for action, there was in the past and currently still is a lack of concrete measures that lever the potential of Industry 4.0 for sustainability management. During the course of this position paper we develop six theses (two from each sustainability perspective) against the background of the current situation in research and practice, and policy. KW - industry 4.0 KW - sustainability KW - triple bottom line Y1 - 2020 SN - 978-989-758-476-3 U6 - https://doi.org/10.5220/0010148601090116 SP - 109 EP - 116 PB - SciTePress CY - [Erscheinungsort nicht ermittelbar] ER - TY - CHAP A1 - Vladova, Gergana A1 - Bertheau, Clementine ED - de Witt, Claudia ED - Gloerfeld, Christina ED - Wrede, Silke Elisabeth T1 - Unter dem Zeichen Künstlicher Intelligenz BT - Berufe, Kompetenzen und Kompetenzvermittlung der Zukunft T2 - Künstliche Intelligenz in der Bildung N2 - Der Einsatz Künstlicher Intelligenz (KI) wird zunehmend relevant – sowohl in Berufen mit formalisierbaren Aufgaben als auch in Berufsfeldern, für deren Aufgaben Erfahrungswissen notwendig ist und situationsabhängig Entscheidungen getroffen werden, die mit folgenschweren Konsequenzen verbunden sein können. Um das Potenzial der Zusammenarbeit zwischen Mensch und KI auszuschöpfen, muss sich der Mensch entsprechend wappnen. Somit verändern sich die Kompetenzanforderungen an Mitarbeiter:innen auf allen Ebenen und an ihre Führungskräfte. Relevante Konzepte des lebenslangen Lernens und der betrieblichen Weiterbildung gewinnen durch den Einfluss der Technologie auch unter teilweise veränderten Lernbedingungen vermehrt an Bedeutung. Neben neuen technischen und Fachkompetenzen, sind für die Nutzung von und die Zusammenarbeit mit der neuen Technologie weitere Kompetenzen notwendig, um z. B. einschätzen zu können, wann die Arbeit der Maschine ethisch vertretbar, effektiv, verantwortungsvoll, fair, transparent und nachvollziehbar ist. Auch neue Tätigkeitsprofile entstehen und die beruflichen Rollen verändern sich entsprechend. Neben den Anforderungen, die die KI an Bildung und Kompetenzentwicklung stellt, wird sie weiterhin zunehmend zur Gestaltung von Lernumgebungen und für den Kompetenzaufbau im Beruf eingesetzt. Sie ist somit nicht nur der Auslöser von Veränderungen, sondern auch das Instrument, welches genutzt wird, um die Lehre zu unterstützen und individueller, abwechslungsreicher sowie zeit- und ortunabhängiger zu gestalten. Im Beitrag werden Chancen und Herausforderungen durch den Einsatz von KI für zwei Dimensionen diskutiert: die Transformationsprozesse in der Berufswelt und die Gestaltung von Lernprozessen. KW - Künstliche Intelligenz KW - Weiterbildung KW - Berufsbilder KW - Beruf KW - Kompetenzen Y1 - 2023 SN - 978-3-658-40078-1 SN - 978-3-658-40079-8 U6 - https://doi.org/10.1007/978-3-658-40079-8_19 SP - 393 EP - 410 PB - Springer VS CY - Wiesbaden ER - TY - CHAP A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert ED - Reis, Arsénio ED - Barroso, João ED - Lopes, J. Bernardino ED - Mikropoulos, Tassos ED - Fan, Chih-Wen T1 - Yes, we can (?) BT - a critical review of the COVID-19 semester T2 - Technology and innovation in learning, teaching and education : second international conference, TECH-EDU 2020, Vila Real, Portugal, December 2-4, 2020 : proceedings N2 - The COVID-19 crisis has caused an extreme situation for higher education institutions around the world, where exclusively virtual teaching and learning has become obligatory rather than an additional supporting feature. This has created opportunities to explore the potential and limitations of virtual learning formats. This paper presents four theses on virtual classroom teaching and learning that are discussed critically. We use existing theoretical insights extended by empirical evidence from a survey of more than 850 students on acceptance, expectations, and attitudes regarding the positive and negative aspects of virtual teaching. The survey responses were gathered from students at different universities during the first completely digital semester (Spring-Summer 2020) in Germany. We discuss similarities and differences between the subjects being studied and highlight the advantages and disadvantages of virtual teaching and learning. Against the background of existing theory and the gathered data, we emphasize the importance of social interaction, the combination of different learning formats, and thus context-sensitive hybrid learning as the learning form of the future. KW - COVID-19 KW - higher education KW - virtual learning KW - digital learning KW - subject differences Y1 - 2021 SN - 978-3-030-73987-4 SN - 978-3-030-73988-1 U6 - https://doi.org/10.1007/978-3-030-73988-1_17 SP - 225 EP - 235 PB - Springer CY - Cham ER - TY - CHAP A1 - Wagner, Dieter A1 - Tellez, Ibrahin Amhed León ED - Hickmann, Thomas ED - Lederer, Markus T1 - Knowledge and technology-transfer-networks BT - examples in the nutrition, food and agricultural sector in Germany and Cuba T2 - Leidenschaft und Augenmaß : sozialwissenschaftliche Perspektiven auf Entwicklung, Verwaltung, Umwelt und Klima : Festschrift für Harald Fuhr Y1 - 2020 SN - 978-3-8487-5249-2 SN - 978-3-8452-9429-2 U6 - https://doi.org/10.5771/9783845294292-285 SP - 285 EP - 298 PB - Nomos CY - Baden-Baden ER - TY - CHAP A1 - Weyland, Michael A1 - Pallast, Gregor A1 - Tiberius, Victor ED - Brahm, Taiga ED - Iberer, Ulrich ED - Kärner, Tobias ED - Weyland, Michael T1 - Ökonomisches Denken fördern durch kognitiv aktivierende Aufgaben T2 - Ökonomisches Denken lehren und lernen N2 - In diesem Beitrag möchten wir einen Gedanken des amerikanischen Mathematikers Paul Halmos aufgreifen und konkretisieren. Wir möchten verdeutlichen, dass ökonomisches Denken nicht abstrakt gelehrt, sondern „erfahren“ werden muss, wenn es nachhaltig und in seiner ganzen Breite gefördert werden soll. Dazu dienen kognitiv aktivierende Aufgaben. Was man darunter versteht und welche Funktionen und Qualitätsmerkmale Aufgaben in der ökonomischen Bildung besitzen, verdeutlichen wir in den Abschnitten 1 und 2. Im Praxisteil (Abschnitte 3 bis 8) werden konkrete, unterrichtlich erprobte Beispielaufgaben vorgestellt, mit denen ökonomisches Denken erfolgreich gefördert werden kann. Unser Beitrag schließt mit einer kurzen Skizze wirtschaftsdidaktischer Implikationen (Abschnitt 9). N2 - In this chapter, we refer to the American mathematician Paul Halmos’ notion that economic thinking cannot be taught in an abstract way but has to be “experienced” so that it can be facilitated in a sustainable and broad way. This can be accomplished with cognitively activating tasks. In sections 1 and 2, we define these and explain their functions and quality requirements for economic education. In the practice sections 3 to 8, we show specific exemplary tasks, which have been successfully tested in classes tofoster economic thinking. The chapter concludes with implications for economic education. KW - Ökonomische Bildung KW - kognitive Aktivierung KW - Lernaufgaben KW - ökonomische Experimente KW - Verhaltensökonomie KW - Umweltökonomie KW - economic education KW - cognitive activation KW - tasks KW - classroom experiments KW - behavioral economics KW - environmental economics Y1 - 2022 UR - https://elibrary.utb.de/doi/book/10.3278/9783763973088 SN - 978-3-7639-7048-3 SN - 978-3-7639-7308-8 U6 - https://doi.org/10.3278/9783763973088_25 SP - 26 EP - 48 PB - wbv CY - Bielefeld ER - TY - CHAP A1 - Wulff, Markus A1 - Tiberius, Victor A1 - Mahto, Raj V. ED - Kraus, Sascha ED - Clauß, Thomas ED - Kallmuenzer, Andreas T1 - Mapping the intellectual structure of family firm research and proposing a research agenda T2 - Research handbook on entrepreneurship and innovation in family firms N2 - In this chapter, we conduct bibliometric performance analyses and a co-citation analysis on all articles relating to family firms indexed in Scopus and Web of Science and all articles published in the Family Business Review, Journal of Family Business Management, and the Journal of Family Business Strategy. Based on the literature sample of 4,056 articles published between 1960 and 2020 by 3,600 authors in 783 journals and their 175,163 references, we identify the most productive and most cited journals, the most cited authors, and the 25 most cited articles. Our science mapping reveals the agency theory, definitions, entrepreneurship, internationalization, ownership, resources, socioemotional wealth, and succession as the predominant research themes in family firm research. Whereas entrepreneurship explicitly appears in one of the clusters, innovation does not yet. Based on our findings, we propose a research framework and point to several research gaps to be addressed by future research. KW - bibliometric analysis KW - family firms KW - research agenda Y1 - 2023 SN - 978-1-80088-923-1 SN - 978-1-80088-924-8 U6 - https://doi.org/10.4337/9781800889248.00007 SP - 14 EP - 37 PB - Edward Elgar Publishing CY - Cheltenham ER -