TY - JOUR A1 - Paz, Cristian A1 - Becerra, Jose A1 - Silva, Mario A1 - Burgos, Viviana A1 - Heydenreich, Matthias A1 - Schmidt, Bernd A1 - Thu Tran, A1 - Vetter, Irina T1 - (-)-Pentylsedinine, a New Alkaloid from the Leaves of Lobelia tupa with Agonist Activity at Nicotinic Acetylcholine Receptor JF - Natural product communications : an international journal for communications and reviews N2 - Lobelia tupa, also called devil's tobacco, is a native plant from the center-south of Chile which has been used by the native people of Chile as a hallucinogenic and anesthetic plant. A new piperidine alkaloid, called pentylsedinine, which comprises five carbons in the side chain, was isolated from the aerial part of L. tupa, along with lobeline and lobelanidine. The structure was established on the basis of 1D and 2D NMR spectroscopy. While lobeline is a neutral antagonist at alpha 3 beta 2/alpha 3 beta 4 nAChR and alpha 7 nAChR, both lobelanidine and pentylsedinine act as partial agonists at nAChR KW - Lobelia tupa KW - Piperidine alkaloid KW - nAChR KW - Pentylsedinine Y1 - 2015 SN - 1934-578X SN - 1555-9475 VL - 10 IS - 8 SP - 1355 EP - 1357 PB - NPC CY - Westerville ER - TY - JOUR A1 - Kolocouris, Antonios A1 - Koch, Andreas A1 - Kleinpeter, Erich A1 - Stylianakis, Ioannis T1 - 2-Substituted and 2,2-disubstituted adamantane derivatives as models for studying substituent chemical shifts and C-H-ax center dot center dot center dot Y-ax cyclohexane contacts-results from experimental and theoretical NMR spectroscopic chemical shifts and DFT structures JF - Tetrahedron N2 - The complete H-1 and C-13 NMR chemical shifts assignment for various 2-substituted and 2,2-disubstituted adamantane derivatives 1-38 in CDCl3 solution was realized on the basis of NMR experiments combined with chemical structure information and DFT-GIAO (B3LYP/6-31+G(d,p)-GIAO) calculations of chemical shifts in solution. Substituent-induced C-13 NMR chemical shifts (SCS) are discussed. C-H-ax center dot center dot center dot Y-ax contacts are a textbook prototype of steric hindrance in organic chemistry. The nature of these contacts will be further investigated in this work on basis of new adamantane derivatives, which are substituted at C-2 to provide models for 1,4-C-H-ax center dot center dot center dot Y-ax and 1,5-C-H-ax center dot center dot center dot Y-ax contacts. The B3LYP/6-31+G(d,p) calculations predicted the presence of NBO hyperconjugative attractive interactions between C-H-ax and Y-ax groups along C-H-ax center dot center dot center dot Y-ax contacts. The H-1 NMR signal separation, Delta delta(gamma-CH2), reflects the strength of the H-bonded C-H-ax center dot center dot center dot Y-ax contact. (C) 2015 Elsevier Ltd. All rights reserved. KW - 2-Substituted adamantane derivatives KW - 2,2-Disubstituted adamantane derivatives KW - H-1 NMR KW - C-13 NMR KW - B3LYP/6-31+G(d,p) calculations KW - GIAO calculations KW - Substituent chemical shifts Y1 - 2015 U6 - https://doi.org/10.1016/j.tet.2015.01.044 SN - 0040-4020 VL - 71 IS - 16 SP - 2463 EP - 2481 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Ehlert, Christopher A1 - Kröner, Dominik A1 - Saalfrank, Peter T1 - A combined quantum chemical/molecular dynamics study of X-ray photoelectron spectra of polyvinyl alcohol using oligomer models JF - Journal of electron spectroscopy and related phenomena : the international journal on theoretical and experimental aspects of electron spectroscopy N2 - X-ray photoelectron spectroscopy (XPS) is a powerful tool for probing the local chemical environment of atoms near surfaces. When applied to soft matter, such as polymers, XPS spectra are frequently shifted and broadened due to thermal atom motion and by interchain interactions. We present a combined quantum mechanical QM/molecular dynamics (MD) simulation of X-ray photoelectron spectra of polyvinyl alcohol (PVA) using oligomer models in order to account for and quantify these effects on the XPS (C1s) signal. In our study, molecular dynamics at finite temperature were performed with a classical forcefield and by ab initio MD (AIMD) using the Car-Parrinello method. Snapshots along, the trajectories represent possible conformers and/or neighbouring environments, with different C1s ionization potentials for individual C atoms leading to broadened XPS peaks. The latter are determined by Delta-Kohn Sham calculations. We also examine the experimental practice of gauging XPS (C1s) signals of alkylic C-atoms in C-containing polymers to the C1s signal of polyethylene. We find that (i) the experimental XPS (C1s) spectra of PVA (position and width) can be roughly represented by single-strand models, (ii) interchain interactions lead to red-shifts of the XPS peaks by about 0.6 eV, and (iii) AIMD simulations match the findings from classical MD semi-quantitatively. Further, (iv) the gauging procedure of XPS (C1s) signals to the values of PE, introduces errors of about 0.5 eV. (C) 2014 Elsevier B.V. All rights reserved. KW - Simulation of polymer XPS KW - Delta-Kohn Sham method KW - Thermal broadening effects KW - Interchain interactions KW - Classical MD KW - Poly vinyl alcohol Y1 - 2015 U6 - https://doi.org/10.1016/j.elspec.2014.12.007 SN - 0368-2048 SN - 1873-2526 VL - 199 SP - 38 EP - 45 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Schwarze, Thomas A1 - Riemer, Janine A1 - Eidner, Sascha A1 - Holdt, Hans-Jürgen T1 - A Highly K+-Selective Two-Photon Fluorescent Probe JF - Chemistry - a European journal N2 - A highly K+-selective two-photon fluorescent probe for the in vitro monitoring of physiological K+ levels in the range of 1-100 mM is reported. The two-photon excited fluorescence (TPEF) probe shows a fluorescence enhancement (FE) by a factor of about three in the presence of 160 mM K+, independently of one-photon (OP, 430 nm) or two-photon (TP, 860 nm) excitation and comparable K+-induced FEs in the presence of competitive Na+ ions. The estimated dissociation constant (K-d) values in Na+-free solutions (K-d(OP)=(28 +/- 5) mM and K-d(TP)=(36 +/- 6) mM) and in combined K+/Na+ solutions (K-d(OP)=(38 +/- 8) mM and K-d(TP)=(46 +/- 25) mM) reflecting the high K+/Na+ selectivity of the fluorescent probe. The TP absorption cross-section (sigma(2PA)) of the TPEF probe+160 mMK(+) is 26 GM at 860 nm. Therefore, the TPEF probe is a suitable tool for the in vitro determination of K+. KW - click chemistry KW - fluorescence KW - fluorescent probes KW - potassium KW - two-photon Y1 - 2015 U6 - https://doi.org/10.1002/chem.201501473 SN - 0947-6539 SN - 1521-3765 VL - 21 IS - 32 SP - 11306 EP - 11310 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Matis, Jochen Rene A1 - Schoenborn, Jan Boyke A1 - Saalfrank, Peter T1 - A multi-reference study of the byproduct formation for a ring-closed dithienylethene photoswitch JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Photodriven molecular switches are sometimes hindered in their performance by forming byproducts which act as dead ends in sequences of switching cycles, leading to rapid fatigue effects. Understanding the reaction pathways to unwanted byproducts is a prerequisite for preventing them. This article presents a study of the photochemical reaction pathways for byproduct formation in the photochromic switch 1,2-bis-(3-thienyl)-ethene. Specifically, using single-and multi-reference methods the post-deexcitation reaction towards the byproduct in the electronic ground state S-0 when starting from the S-1-S-0 conical intersection (CoIn), is considered in detail. We find an unusual low-energy pathway, which offers the possibility for the formation of a dyotropic byproduct. Several high-energy pathways can be excluded with high probability. Y1 - 2015 U6 - https://doi.org/10.1039/c5cp00987a SN - 1463-9076 SN - 1463-9084 VL - 17 IS - 21 SP - 14088 EP - 14095 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Matis, Jochen René A1 - Schönborn, Jan Boyke A1 - Saalfrank, Peter T1 - A multi-reference study of the byproduct formation for a ring-closed dithienylethene photoswitch N2 - Photodriven molecular switches are sometimes hindered in their performance by forming byproducts which act as dead ends in sequences of switching cycles, leading to rapid fatigue effects. Understanding the reaction pathways to unwanted byproducts is a prerequisite for preventing them. This article presents a study of the photochemical reaction pathways for byproduct formation in the photochromic switch 1,2-bis-(3-thienyl)-ethene. Specifically, using single- and multi-reference methods the post-deexcitation reaction towards the byproduct in the electronic ground state S0 when starting from the S1–S0 conical intersection (CoIn), is considered in detail. We find an unusual low-energy pathway, which offers the possibility for the formation of a dyotropic byproduct. Several high-energy pathways can be excluded with high probability. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 215 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89594 SP - 14088 EP - 14095 ER - TY - JOUR A1 - Matis, Jochen René A1 - Schönborn, Jan Boyke A1 - Saalfrank, Peter T1 - A multi-reference study of the byproduct formation for a ring-closed dithienylethene photoswitch JF - Physical chemistry, chemical physics : PCCP ; a journal of European Chemical Societies N2 - Photodriven molecular switches are sometimes hindered in their performance by forming byproducts which act as dead ends in sequences of switching cycles, leading to rapid fatigue effects. Understanding the reaction pathways to unwanted byproducts is a prerequisite for preventing them. This article presents a study of the photochemical reaction pathways for byproduct formation in the photochromic switch 1,2-bis-(3-thienyl)-ethene. Specifically, using single- and multi-reference methods the post-deexcitation reaction towards the byproduct in the electronic ground state S0 when starting from the S1–S0 conical intersection (CoIn), is considered in detail. We find an unusual low-energy pathway, which offers the possibility for the formation of a dyotropic byproduct. Several high-energy pathways can be excluded with high probability. Y1 - 2015 U6 - https://doi.org/10.1039/C5CP00987A SN - 1463-9076 SN - 1463-9084 IS - 17 SP - 14088 EP - 14095 PB - The Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Roder, Phillip A1 - Hille, Carsten T1 - A Multifunctional Frontloading Approach for Repeated Recycling of a Pressure-Controlled AFM Micropipette JF - PLoS ONE N2 - Fluid force microscopy combines the positional accuracy and force sensitivity of an atomic force microscope (AFM) with nanofluidics via a microchanneled cantilever. However, adequate loading and cleaning procedures for such AFM micropipettes are required for various application situations. Here, a new frontloading procedure is described for an AFM micropipette functioning as a force- and pressure-controlled microscale liquid dispenser. This frontloading procedure seems especially attractive when using target substances featuring high costs or low available amounts. Here, the AFM micropipette could be filled from the tip side with liquid from a previously applied droplet with a volume of only a few μL using a short low-pressure pulse. The liquid-loaded AFM micropipettes could be then applied for experiments in air or liquid environments. AFM micropipette frontloading was evaluated with the well-known organic fluorescent dye rhodamine 6G and the AlexaFluor647-labeled antibody goat anti-rat IgG as an example of a larger biological compound. After micropipette usage, specific cleaning procedures were tested. Furthermore, a storage method is described, at which the AFM micropipettes could be stored for a few hours up to several days without drying out or clogging of the microchannel. In summary, the rapid, versatile and cost-efficient frontloading and cleaning procedure for the repeated usage of a single AFM micropipette is beneficial for various application situations from specific surface modifications through to local manipulation of living cells, and provides a simplified and faster handling for already known experiments with fluid force microscopy. Y1 - 2015 U6 - https://doi.org/10.1371/journal.pone.0144157 SN - 1932-6203 VL - 10 IS - 12 PB - Public Library of Science CY - Lawrence, Kan. ER - TY - GEN A1 - Roder, Phillip A1 - Hille, Carsten T1 - A Multifunctional Frontloading Approach for Repeated Recycling of a Pressure-Controlled AFM Micropipette N2 - Fluid force microscopy combines the positional accuracy and force sensitivity of an atomic force microscope (AFM) with nanofluidics via a microchanneled cantilever. However, adequate loading and cleaning procedures for such AFM micropipettes are required for various application situations. Here, a new frontloading procedure is described for an AFM micropipette functioning as a force- and pressure-controlled microscale liquid dispenser. This frontloading procedure seems especially attractive when using target substances featuring high costs or low available amounts. Here, the AFM micropipette could be filled from the tip side with liquid from a previously applied droplet with a volume of only a few μL using a short low-pressure pulse. The liquid-loaded AFM micropipettes could be then applied for experiments in air or liquid environments. AFM micropipette frontloading was evaluated with the well-known organic fluorescent dye rhodamine 6G and the AlexaFluor647-labeled antibody goat anti-rat IgG as an example of a larger biological compound. After micropipette usage, specific cleaning procedures were tested. Furthermore, a storage method is described, at which the AFM micropipettes could be stored for a few hours up to several days without drying out or clogging of the microchannel. In summary, the rapid, versatile and cost-efficient frontloading and cleaning procedure for the repeated usage of a single AFM micropipette is beneficial for various application situations from specific surface modifications through to local manipulation of living cells, and provides a simplified and faster handling for already known experiments with fluid force microscopy. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 209 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-86592 ER - TY - JOUR A1 - Roder, Phillip A1 - Hille, Carsten T1 - A Multifunctional Frontloading Approach for Repeated Recycling of a Pressure-Controlled AFM Micropipette JF - PLoS one N2 - Fluid force microscopy combines the positional accuracy and force sensitivity of an atomic force microscope (AFM) with nanofluidics via a microchanneled cantilever. However, adequate loading and cleaning procedures for such AFM micropipettes are required for various application situations. Here, a new frontloading procedure is described for an AFM micropipette functioning as a force-and pressure-controlled microscale liquid dispenser. This frontloading procedure seems especially attractive when using target substances featuring high costs or low available amounts. Here, the AFM micropipette could be filled from the tip side with liquid from a previously applied droplet with a volume of only a few mu L using a short low-pressure pulse. The liquid-loaded AFM micropipettes could be then applied for experiments in air or liquid environments. AFM micropipette frontloading was evaluated with the well-known organic fluorescent dye rhodamine 6G and the AlexaFluor647-labeled antibody goat anti-rat IgG as an example of a larger biological compound. After micropipette usage, specific cleaning procedures were tested. Furthermore, a storage method is described, at which the AFM micropipettes could be stored for a few hours up to several days without drying out or clogging of the microchannel. In summary, the rapid, versatile and cost-efficient frontloading and cleaning procedure for the repeated usage of a single AFM micropipette is beneficial for various application situations from specific surface modifications through to local manipulation of living cells, and provides a simplified and faster handling for already known experiments with fluid force microscopy. Y1 - 2015 U6 - https://doi.org/10.1371/journal.pone.0144157 SN - 1932-6203 VL - 10 IS - 12 PB - PLoS CY - San Fransisco ER - TY - GEN A1 - Pape, Simon A1 - Wessig, Pablo A1 - Brunner, Heiko T1 - A new and environmentally benign synthesis of aroylguanidines using iron trichloride N2 - A new synthetic approach for the guanylation of aroylthioureas using iron trichloride is presented. Our synthetic method distinguishes itself by benign reaction conditions, low costs and a broad product spectrum. The scope of the reaction and calorimetric studies are described. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 308 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102720 SP - 101408 EP - 101411 ER - TY - JOUR A1 - Pape, Simon A1 - Wessig, Pablo A1 - Brunner, Heiko T1 - A new and environmentally benign synthesis of aroylguanidines using iron trichloride JF - RSC Advances N2 - A new synthetic approach for the guanylation of aroylthioureas using iron trichloride is presented. Our synthetic method distinguishes itself by benign reaction conditions, low costs and a broad product spectrum. The scope of the reaction and calorimetric studies are described. Y1 - 2015 U6 - https://doi.org/10.1039/c5ra20869f SN - 2046-2069 VL - 5 IS - 123 SP - 101408 EP - 101411 PB - Royal Society of Chemistry CY - Cambridge ER - TY - CHAP A1 - Haralampiev, Ivan A1 - Mertens, Monique A1 - Schwarzer, Roland A1 - Herrmann, Andreas A1 - Volkmer, Rudolf A1 - Wessig, Pablo A1 - Müller, Peter T1 - A palmitic acid functionalized with a maleimide group is used to recruit SH-containing peptides to lipid and biological membranes T2 - The FEBS journal Y1 - 2015 SN - 1742-464X SN - 1742-4658 VL - 282 SP - 204 EP - 204 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Cywinski, Piotr J. A1 - Olejko, Lydia A1 - Löhmannsröben, Hans-Gerd T1 - A time-resolved luminescent competitive assay to detect L-selectin using aptamers as recognition elements JF - Analytica chimica acta : an international journal devoted to all branches of analytical chemistry N2 - L-selectin is a protein with potential importance for numerous diseases and clinical disorders. In this paper, we present a new aptamer-based luminescent assay developed to detect L-selectin. The sensing system working principle is based on Forster Resonance Energy Transfer (FRET) from a donor terbium complex (TbC) to an acceptor cyanine dye (Cy5). In the present approach, the biotinylated aptamer is combined with Cy5-labelled streptavidin (Cy5-Strep) to yield an aptamer-based acceptor construct (Apta-Cy5-Strep), while L-selectin is conjugated using luminescent TbC. Upon aptamer binding to the TbC-labelled L-selectin (L-selectin-TbC), permanent donor-acceptor proximity is established which allows for radiationless energy transfer to occur. However, when unlabelled L-selectin is added, it competes with the L-selectin-TbC and the FRET signal decreases as the L-selectin concentration increases. FRET from the TbC to Cy5 was observed with time-gated time-resolved luminescence spectroscopy. A significant change in the corrected luminescence signal was observed in the dynamic range of 10 -500 ng/mL L-selectin, the concentration range relevant for accelerated cognitive decline of Alzheimer's disease, with a limit of detection (LOD) equal to 10 ng/mL. The aptasensor-based assay is homogeneous and can be realized within one hour. Therefore, this method has the potential to become an alternative to tedious heterogeneous analytical methods, e.g. based on enzyme-linked immunosorbent assay (ELISA). (C) 2015 Elsevier B.V. All rights reserved. KW - Aptamer KW - FRET KW - L-selectin KW - Luminescence spectroscopy KW - Fluoroassay KW - Lanthanide Y1 - 2015 U6 - https://doi.org/10.1016/j.aca.2015.06.045 SN - 0003-2670 SN - 1873-4324 VL - 887 SP - 209 EP - 215 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Jehannin, Marie T1 - About the role of physico-chemical properties and hydrodynamics on the progress of a precipitation reaction T1 - Über die Rolle physikalisch-chemischer Eigenschaften und Hydrodynamiken auf den Fortschritt einer Fällungsreaktion BT - the case of cerium oxalate particles produced during coalescence of drops BT - Ceroxalat-Partikel, entstanden während der Koaleszenz von Tropfen N2 - The size and morphology control of precipitated solid particles is a major economic issue for numerous industries. For instance, it is interesting for the nuclear industry, concerning the recovery of radioactive species from used nuclear fuel. The precipitates features, which are a key parameter from the post-precipitate processing, depend on the process local mixing conditions. So far, the relationship between precipitation features and hydrodynamic conditions have not been investigated. In this study, a new experimental configuration consisting of coalescing drops is set to investigate the link between reactive crystallization and hydrodynamics. Two configurations of aqueous drops are examined. The first one corresponds to high contact angle drops (>90°) in oil, as a model system for flowing drops, the second one correspond to sessile drops in air with low contact angle (<25°). In both cases, one reactive is dissolved in each drop, namely oxalic acid and cerium nitrate. When both drops get into contact, they may coalesce; the dissolved species mix and react to produce insoluble cerium oxalate. The precipitates features and effect on hydrodynamics are investigated depending on the solvent. In the case of sessile drops in air, the surface tension difference between the drops generates a gradient which induces a Marangoni flow from the low surface tension drop over the high surface tension drop. By setting the surface tension difference between the two drops and thus the Marangoni flow, the hydrodynamics conditions during the drop coalescence could be modified. Diols/water mixtures are used as solvent, in order to fix the surface tension difference between the liquids of both drops regardless from the reactant concentration. More precisely, the used diols, 1,2-propanediol and 1,3-propanediol, are isomer with identical density and close viscosity. By keeping the water volume fraction constant and playing with the 1,2-propanediol and 1,3-propanediol volume fractions of the solvents, the mixtures surface tensions differ up to 10 mN/m for identical/constant reactant concentration, density and viscosity. 3 precipitation behaviors were identified for the coalescence of water/diols/recatants drops depending on the oxalic excess. The corresponding precipitates patterns are visualized by optical microscopy and the precipitates are characterized by confocal microscopy SEM, XRD and SAXS measurements. In the intermediate oxalic excess regime, formation of periodic patterns can be observed. These patterns consist in alternating cerium oxalate precipitates with distinct morphologies, namely needles and “microflowers”. Such periodic fringes can be explained by a feedback mechanism between convection, reaction and the diffusion. N2 - Die Kontrolle der Morphologie und Größe fester durch Fällung erzeugter Partikel ist eine wichtige Herausforderung in Industrie und Forschung. Insbesondere gilt dies für die Wiederaufbereitung verbrauchter Brennstäber in der Atomindustrie. Die Eigenschaften der Ausfällungen hängen von den Mischbedingungen der Flüssigkeiten in den Prozessen ab. Dennoch sind die Beziehungen zwischen den physischen Charakteristiken der erzeugten Partikeln und den hydrodynamischen Bedingungen ungewiss. In dieser Arbeit werden Zwei-Tropfen-Koalezenz-Experiment genutzt, um die Verbindungen zwischen Hydrodynamik und Fällungsreaktion besser zu verstehen. Zwei Konfigurationen von ruhenden wässrigen Tropfen wurden untersucht: Zum einen Tropfen mit hohem Kontaktwinkel (> 90°) in Öl und zum anderen Tropfen mit kleinem Kontaktwinkel (< 25°) in Luft. In beiden Fällen wurde Oxalsäure und Ceriumnitrat jeweils in einem Tropfen gelöst. Wenn beide Tropfen einander in Kontakt treten, können sie sich vereinigen. Dabei mischen sich die Reagenzien und erzeugen Ceriumoxalat. In Abhängigkeit von Lösungsmitteln werden die Eigenschaften der Fällung sowie ihr Einfluss auf die Hydrodynamik untersucht. In Experimenten Tropfen in Luft ist es außerdem möglich, mittels Wasser/Diol-Mischungen den Oberflächenspannungsgradienten zwischen beiden Tropfenflüssigkeiten zu ändern. Damit ist es möglich den resultierenden Marangoni-Fluss zu kontrollieren. So werden die hydrodynamischen Bedingungen unabhängig von dem Oxalsäureüberschuss verwirklicht. In diesem Fall werden drei Fällungsverhalten abhängig er Oxalsäure-Konzentration beobachtet. Das Zwischenverhalten zeigt überraschende periodische Strukturen, welche verschiedenen Morphologien bilden, nämlich Nägeln und „Microflower“. Die Strukturen wurden über Optische Mikroskopie Identifiziert und charakterisiert mit Hilfe von Konfokaler Mikroskopie, SEM, XRD und SAXS. Die Entstehung solcher Strukturen könnte durch eine Konvektion- Diffusion- Reaktion-Rückkopplung erklärt werden. N2 - Réussir à contrôler la morphologie et la taille de particules solides obtenues par précipitation est un enjeu industriel majeur. C’est notamment le cas dans l’industrie nucléaire pour le recyclage du combustible usé. Les caractéristiques des précipités sont liées aux conditions de mélange des phases liquides dans les procédés. Les corrélations entre les paramètres physiques des particules obtenues et les conditions hydrodynamiques n’ont pas été examinées jusqu’à présent. Dans cette étude, des systèmes expérimentaux originaux, basés sur la coalescence de deux gouttes, sont utilisés afin de mieux comprendre les liens entre hydrodynamique et réaction de précipitation. Deux configurations de gouttes aqueuses ont été investiguées, la première consiste en deux goutes posées à fort angle de contact (>90°) dans l’huile, il s’agit d’un système modèle pour les gouttes en émulsion, la second configuration correspond à deux gouttes posées à faible angle de contact (>25°) dans l’air. Dans chaque cas, une espèce réactive est dissoute dans chaque goutte, à savoir de l’acide oxalique ou du nitrate de cérium dans la seconde. Lorsque les deux gouttes se touchent, elles peuvent éventuellement coalescer, alors les espèces chimiques se mélangent et réagissent pour produire un précipité d’oxalate de cérium. Les caractéristiques de ce précipité et ses effets sur l’hydrodynamique sont examinés en fonction du solvant utilisé. De plus, dans le cas des gouttes posées sur une surface de silice dans l’air, une différence de tension de surface entre deux gouttes crée un gradient qui génère un flux de Marangoni dirigé de la goutte de faible tension de surface au-dessus de la goutte de forte tension de surface. En jouant sur la différence de tension de surface entre les deux gouttes, et ainsi sur le flux de Marangoni, il est possible de modifier les conditions hydrodynamiques lors de la coalescence des gouttes. Des mélanges eau/diols ont été utilisés comme solvant afin de pouvoir modifier la différence de tension de surface entre les liquides des deux gouttes indépendamment de leur concentration en réactif. Les diols utilisés, le 1,2-propanediol et le 1,3-propanediol sont des isomères, ils sont la même densité, des viscosités semblables mais des tensions de surface différentes. En fixant la fraction volumique d’eau dans le solvant, et en jouant sur les fractions volumiques de chaque diols, il est possible de contrôler la tension de surface des mélanges sur une gamme de 10 mN/m pour une concentration en réactifs donnée, et en conservant la densité et viscosité des solvants. Trois régimes de précipitation ont été identifiés dans le cas de la coalescence de gouttes d’eau/diols/réactifs en fonction de l’excès oxalique. Les motifs de précipitation en découlant ont été imagés par microscopie optique et les différents précipités ont été caractérisés à l’aide de microscopie confocale, MEB, DRX et SAXS. Le régime intermédiaire présente des motifs périodiques surprenants. Ces motifs correspondent à des domaines nettement délimités d’oxalate de cérium de différentes morphologies, à savoir des aiguilles et des « microflowers ». L’obtention de tels motifs peut s’expliquer par un mécanisme de rétroaction entre convection, réaction et diffusion. KW - Marangoni flow KW - coalescence KW - periodic pattern KW - oxalic precipitation KW - drop KW - Marangoni-Fluss KW - Koaleszenz KW - Tropfen KW - Fällungsreaktion KW - periodisches Muster KW - Oxalat-Fällung KW - flux de Marangoni KW - coalescence KW - gouttes KW - précipitation KW - motif périodique KW - précipitation oxalique Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-88364 ER - TY - JOUR A1 - Schmidt, Bernd A1 - Elizarov, Nelli A1 - Riemer, Nastja A1 - Hölter, Frank T1 - Acetamidoarenediazonium Salts: Opportunities for Multiple Arene Functionalization JF - European journal of organic chemistry N2 - Unlike their ortho counterparts, meta- and para-acetamidoanilines can be converted into the corresponding acetamidoarenediazonium salts. These offer various opportunities for multiple Pd-catalyzed arene functionalization reactions, such as Matsuda-Heck-, Suzuki-Miyaura- or Fujiwara-Moritani couplings. KW - Arenes KW - Amides KW - C-C coupling KW - Cross-coupling KW - Palladium Y1 - 2015 U6 - https://doi.org/10.1002/ejoc.201500795 SN - 1434-193X SN - 1099-0690 IS - 26 SP - 5826 EP - 5841 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Secker, Christian A1 - Robinson, Joshua W. A1 - Schlaad, Helmut T1 - Alkyne-X modification of polypeptoids JF - European polymer journal N2 - Poly(N-propargyl glycine) (PNPG) can be readily prepared by ring-opening polymerization of N-propargyl glycine N-carboxyanhydride (NCA) and modified using various addition reactions such as copper catalyzed [3+2] cycloaddition of azide, radical (photo-)addition of thiol, nucleophilic addition of ethylene oxide, and thermal induced cross-linking. It is demonstrated that PNPG can serve as a modular platform to produce a bibliography of novel functional polypeptoid or pseudopeptide materials, including polypeptoid ionic liquids and graft copolymers. KW - Polypeptoid KW - NCA KW - Post-polymerization modification KW - Click chemistry Y1 - 2015 U6 - https://doi.org/10.1016/j.eurpolymj.2014.08.028 SN - 0014-3057 SN - 1873-1945 VL - 62 SP - 394 EP - 399 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Zühlke, Martin A1 - Riebe, Daniel A1 - Beitz, Toralf A1 - Löhmannsröben, Hans-Gerd A1 - Zenichowski, Karl A1 - Diener, Marc A1 - Linscheid, Michael W. T1 - An electrospray ionization-ion mobility spectrometer as detector for high-performance liquid chromatography JF - European journal of mass spectrometry N2 - The application of electrospray ionization (ESI) ion mobility (IM) spectrometry on the detection end of a high-performance liquid chromatograph has been a subject of study for some time. So far, this method has been limited to low flow rates or has required splitting of the liquid flow. This work presents a novel concept of an ESI source facilitating the stable operation of the spectrometer at flow rates between 10 mu L min(-1) and 1500 mu L min(-1) without flow splitting, advancing the T-cylinder design developed by Kurnin and co-workers. Flow rates eight times faster than previously reported were achieved because of a more efficient dispersion of the liquid at increased electrospray voltages combined with nebulization by a sheath gas. Imaging revealed the spray operation to be in a rotationally symmetric multijet-mode. The novel ESI-IM spectrometer tolerates high water contents (<= 90%) and electrolyte concentrations up to 10 mM, meeting another condition required of high-performance liquid chromatography (HPLC) detectors. Limits of detection of 50 nM for promazine in the positive mode and 1 mu M for 1,3-dinitrobenzene in the negative mode were established. Three mixtures of reduced complexity (five surfactants, four neuroleptics, and two isomers) were separated in the millisecond regime in stand-alone operation of the spectrometer. Separations of two more complex mixtures (five neuroleptics and 13 pesticides) demonstrate the application of the spectrometer as an HPLC detector. The examples illustrate the advantages of the spectrometer over the established diode array detector, in terms of additional IM separation of substances not fully separated in the retention time domain as well as identification of substances based on their characteristic IMs. KW - ESI KW - IMS KW - HPLC KW - spray imaging KW - neuroleptics KW - pesticides KW - surfactants Y1 - 2015 U6 - https://doi.org/10.1255/ejms.1367 SN - 1469-0667 SN - 1751-6838 VL - 21 IS - 3 SP - 391 EP - 402 PB - WeltTrends CY - Sussex ER - TY - GEN A1 - Tasior, Mariusz A1 - Bald, Ilko A1 - Deperasińska, Irena A1 - Cywiński, Piotr J. A1 - Gryko, Daniel T. T1 - An internal charge transfer-dependent solvent effect in V-shaped azacyanines N2 - New V-shaped non-centrosymmetric dyes, possessing a strongly electron-deficient azacyanine core, have been synthesized based on a straightforward two-step approach. The key step in this synthesis involves palladium-catalysed cross-coupling of dibromo-N,N′-methylene-2,2′-azapyridinocyanines with arylacetylenes. The resulting strongly polarized π-expanded heterocycles exhibit green to orange fluorescence and they strongly respond to changes in solvent polarity. We demonstrate that differently electron-donating peripheral groups have a significant influence on the internal charge transfer, hence on the solvent effect and fluorescence quantum yield. TD-DFT calculations confirm that, in contrast to the previously studied bis(styryl)azacyanines, the proximity of S1 and T2 states calculated for compounds bearing two 4-N,N-dimethylaminophenylethynyl moieties establishes good conditions for efficient intersystem crossing and is responsible for its low fluorescence quantum yield. Non-linear properties have also been determined for new azacyanines and the results show that depending on peripheral groups, the synthesized dyes exhibit small to large two-photon absorption cross sections reaching 4000 GM. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 306 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102704 SP - 11714 EP - 11720 ER - TY - JOUR A1 - Klier, Dennis Tobias A1 - Kumke, Michael Uwe T1 - Analysing the effect of the crystal structure on upconversion luminescence in Yb3+, Er3+-co-doped NaYF4 nanomaterials JF - Journal of materials chemistry : C, Materials for optical and electronic devices N2 - NaYF4:Yb:Er nanoparticles (UCNP) were synthesized under mild experimental conditions to obtain a pure cubic lattice. Upon annealing at different temperatures up to T-an = 700 degrees C phase transitions to the hexagonal phase and back to the cubic phase were induced. The UCNP materials obtained for different T-an were characterized with respect to the lattice phase using standard XRD and Raman spectroscopy as well as steady state and time resolved upconversion luminescence. The standard techniques showed that for the annealing temperature range 300 degrees C < T-an < 600 degrees C the hexagonal lattice phase was dominant. For T-an < 300 degrees C hardly any change in the lattice phase could be deduced, whereas for T-an > 600 degrees C a back transfer to the alpha-phase was observed. Complementarily, the luminescence upconversion properties of the annealed UCNP materials were characterized in steady state and time resolved luminescence measurements. Distinct differences in the upconversion luminescence intensity, the spectral intensity distribution and the luminescence decay kinetics were found for the cubic and hexagonal lattice phases, respectively, corroborating the results of the standard analytical techniques used. In laser power dependent measurements of the upconversion luminescence intensity it was found that the green (G1, G2) and red (R) emission of Er3+ showed different effects of T-an on the number of required photons reflecting the differences in the population routes of different energy levels involved. Furthermore, the intensity ratio of G(full)/R is highly effected by the laser power only when the beta-phase is present, whereas the G1/G2 intensity ratio is only slightly effected regardless of the crystal phase. Moreover, based on different upconversion luminescence kinetics characteristics of the cubic and hexagonal phase time-resolved area normalized emission spectra (TRANES) proved to be a very sensitive tool to monitor the phase transition between cubic and hexagonal phases. Based on the TRANES analysis it was possible to resolve the lattice phase transition in more detail for 200 degrees C < T-an < 300 degrees C, which was not possible with the standard techniques. Y1 - 2015 U6 - https://doi.org/10.1039/c5tc02218e SN - 2050-7526 SN - 2050-7534 VL - 3 IS - 42 SP - 11228 EP - 11238 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Klier, Dennis Tobias A1 - Kumke, Michael Uwe T1 - Analysing the effect of the crystal structure on upconversion luminescence in Yb3+,Er3+-co-doped NaYF4 nanomaterials JF - Journal of materials chemistry C ; Materials for optical and electronic devices N2 - NaYF4:Yb:Er nanoparticles (UCNP) were synthesized under mild experimental conditions to obtain a pure cubic lattice. Upon annealing at different temperatures up to Tan = 700 °C phase transitions to the hexagonal phase and back to the cubic phase were induced. The UCNP materials obtained for different Tan were characterized with respect to the lattice phase using standard XRD and Raman spectroscopy as well as steady state and time resolved upconversion luminescence. The standard techniques showed that for the annealing temperature range 300 °C < Tan < 600 °C the hexagonal lattice phase was dominant. For Tan < 300 °C hardly any change in the lattice phase could be deduced, whereas for Tan > 600 °C a back transfer to the α-phase was observed. Complementarily, the luminescence upconversion properties of the annealed UCNP materials were characterized in steady state and time resolved luminescence measurements. Distinct differences in the upconversion luminescence intensity, the spectral intensity distribution and the luminescence decay kinetics were found for the cubic and hexagonal lattice phases, respectively, corroborating the results of the standard analytical techniques used. In laser power dependent measurements of the upconversion luminescence intensity it was found that the green (G1, G2) and red (R) emission of Er3+ showed different effects of Tan on the number of required photons reflecting the differences in the population routes of different energy levels involved. Furthermore, the intensity ratio of Gfull/R is highly effected by the laser power only when the β-phase is present, whereas the G1/G2 intensity ratio is only slightly effected regardless of the crystal phase. Moreover, based on different upconversion luminescence kinetics characteristics of the cubic and hexagonal phase time-resolved area normalized emission spectra (TRANES) proved to be a very sensitive tool to monitor the phase transition between cubic and hexagonal phases. Based on the TRANES analysis it was possible to resolve the lattice phase transition in more detail for 200 °C < Tan < 300 °C, which was not possible with the standard techniques. Y1 - 2015 U6 - https://doi.org/10.1039/C5TC02218E SN - 2050-7526 SN - 2050-7534 IS - 3 SP - 11228 EP - 11238 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Klier, Dennis Tobias A1 - Kumke, Michael Uwe T1 - Analysing the effect of the crystal structure on upconversion luminescence in Yb3+,Er3+-co-doped NaYF4 nanomaterials N2 - NaYF4:Yb:Er nanoparticles (UCNP) were synthesized under mild experimental conditions to obtain a pure cubic lattice. Upon annealing at different temperatures up to Tan = 700 °C phase transitions to the hexagonal phase and back to the cubic phase were induced. The UCNP materials obtained for different Tan were characterized with respect to the lattice phase using standard XRD and Raman spectroscopy as well as steady state and time resolved upconversion luminescence. The standard techniques showed that for the annealing temperature range 300 °C < Tan < 600 °C the hexagonal lattice phase was dominant. For Tan < 300 °C hardly any change in the lattice phase could be deduced, whereas for Tan > 600 °C a back transfer to the α-phase was observed. Complementarily, the luminescence upconversion properties of the annealed UCNP materials were characterized in steady state and time resolved luminescence measurements. Distinct differences in the upconversion luminescence intensity, the spectral intensity distribution and the luminescence decay kinetics were found for the cubic and hexagonal lattice phases, respectively, corroborating the results of the standard analytical techniques used. In laser power dependent measurements of the upconversion luminescence intensity it was found that the green (G1, G2) and red (R) emission of Er3+ showed different effects of Tan on the number of required photons reflecting the differences in the population routes of different energy levels involved. Furthermore, the intensity ratio of Gfull/R is highly effected by the laser power only when the β-phase is present, whereas the G1/G2 intensity ratio is only slightly effected regardless of the crystal phase. Moreover, based on different upconversion luminescence kinetics characteristics of the cubic and hexagonal phase time-resolved area normalized emission spectra (TRANES) proved to be a very sensitive tool to monitor the phase transition between cubic and hexagonal phases. Based on the TRANES analysis it was possible to resolve the lattice phase transition in more detail for 200 °C < Tan < 300 °C, which was not possible with the standard techniques. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 217 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89630 SP - 11228 EP - 11238 ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Kriiger, Stefanie A1 - Koch, Andreas T1 - Anisotropy Effect of Three-Membered Rings in H-1 NMR Spectra: Quantification by TSNMRS and Assignment of the Stereochemistry JF - The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment & general theory N2 - The spatial magnetic properties (through Space NAIR shieldings, TSNMRSs) of cyclopropane; of the heteroanalogous oxirane, thiirane, and aziridine; and of various substituted dis-, and tris-cyclic analogues have been computed by the GIAO perturbation method employing the nucleus independent chemical shift (NICS) concept and visualized as iso-chemical-shielding surfaces (ICSSs) of various size and direction. The TSNMRS values, thus obtained, can be employed to visualize the anisotropy (ring current) effect of I the cyclopropane ring moiety. This approach has been employed to qualify and quantify substituent influences and contributions of appropriate ring heteroatoms O, NH, and S on the anisotropy (ring current) effect of three-mernbered ring moieties, and to assign the stereochemistry of mono-, bis-, and tris cyclic structures containing cyclopropane as a structural element. Characteristic examples are included. Y1 - 2015 U6 - https://doi.org/10.1021/acs.jpca.5b03078 SN - 1089-5639 VL - 119 IS - 18 SP - 4268 EP - 4276 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Irungu, Beatrice N. A1 - Adipo, Nicholas A1 - Orwa, Jennifer A. A1 - Kimani, Francis A1 - Heydenreich, Matthias A1 - Midiwo, Jacob O. A1 - Bjoremark, Per Martin A1 - Hakansson, Mikael A1 - Yenesew, Abiy A1 - Erdelyi, Mate T1 - Antiplasmodial and cytotoxic activities of the constituents of Turraea robusta and Turraea nilotica JF - Journal of ethnopharmacology : an interdisciplinary journal devoted to bioscientific research on indigenous drugs N2 - Ethnopharmacological relevance: Turraea robusta and Turraea nilotica are African medicinal plants used for the treatment of a wide variety of diseases, including malaria. The genus Turraea is rich in limonoids and other triterpenoids known to possess various biological activities. Materials and methods: From the stem bark of T. robusta six compounds, and from various parts of T nilotica eleven compounds were isolated by the use of a combination of chromatographic techniques. The structures of the isolated compounds were elucidated using NMR and MS, whilst the relative configuration of one of the isolated compounds, toonapubesin F, was established by X-ray crystallography. The antiplasmodial activities of the crude extracts and the isolated constituents against the D6 and W2 strains of Plasmodium falciparum were determined using the semiautomated micro dilution technique that measures the ability of the extracts to inhibit the incorporation of (G-H-3, where G is guanine) hypoxanthine into the malaria parasite. The cytotoxicity of the crude extracts and their isolated constituents was evaluated against the mammalian cell lines African monkey kidney (vero), mouse breast cancer (4T1) and human larynx carcinoma (HEp2). Results: The extracts showed good to moderate antiplasmodial activities, where the extract of the stem bark of T. robusta was also cytotoxic against the 4T1 and the HEp2 cells (IC50 < 10 mu g/ml). The compounds isolated from these extracts were characterized as limonoids, protolimonoids and phytosterol glucosides. These compounds showed good to moderate activities with the most active one being azadironolide, IC50 2.4 +/- 0.03 mu M and 1.1 +/- 0.01 mu M against the D6 and W2 strains of Plasmodium falciparum, respectively; all other compounds possessed IC50 14.4-40.5 mu M. None of the compounds showed significant cytotoxicity against vero cells, yet four of them were toxic against the 4T1 and HEp2 cancer cell lines with piscidinol A having IC50 8.0 +/- 0.03 and 8.4 +/- 0.01 mu M against the 4T1 and HEp2 cells, respectively. Diacetylation of piscidinol A resulted in reduced cytotoxicity. Conclusion: From the medicinal plants T. robusta and T. nilotica, twelve compounds were isolated and characterized; two of the isolated compounds, namely 11-epi-toonacilin and azadironolide showed good antiplasmodial activity with the highest selectivity indices. (C) 2015 The Authors. Published by Elsevier Ireland Ltd. KW - Turraea robusta KW - Turraea nilotica KW - Antiplasmodial activity KW - Cytotoxicity KW - Limonoid KW - Toonapubesins F KW - Toonacilin KW - Azadironolide Y1 - 2015 U6 - https://doi.org/10.1016/j.jep.2015.08.039 SN - 0378-8741 VL - 174 SP - 419 EP - 425 PB - Elsevier CY - Clare ER - TY - THES A1 - Ambrogi, Martina T1 - Application of Poly(Ionic Liquid)s for the synthesis of functional carbons Y1 - 2015 ER - TY - JOUR A1 - Brosnan, Sarah M. A1 - Schlaad, Helmut A1 - Antonietti, Markus T1 - Aqueous Self-Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Self-assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self-assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500nm) and microsized (>5m) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics. KW - block copolymers KW - polymersomes KW - polysaccharides KW - self-assembly KW - vesicles Y1 - 2015 U6 - https://doi.org/10.1002/anie.201502100 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 33 SP - 9715 EP - 9718 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Michaelis, Marcus A1 - Koch, Andreas T1 - Are para-nitro-pyridine N-oxides quinonoid or benzenoid? An answer given by spatial NICS (TSNMRS) JF - Tetrahedron N2 - The spatial magnetic properties (Through-Space NMR Shieldings-TSNMRS) of a number of substituted para-nitro-pyridine N-oxides have been computed, visualized as Iso-Chemical-Shielding-Surfaces (ICSS) of various size and direction, and were examined subject to the present quinonoid or benzenoid pi-relectron distribution of the six-membered ring. (C) 2015 Elsevier Ltd. All rights reserved. KW - para-Nitro-pyridine N-oxides KW - Quinonoid structure KW - Benzenoid structure KW - Ring current effect KW - Anisotropy effect KW - Theoretical calculations Y1 - 2015 U6 - https://doi.org/10.1016/j.tet.2015.02.043 SN - 0040-4020 VL - 71 IS - 15 SP - 2273 EP - 2279 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wessig, Pablo A1 - Merkel, Roswitha A1 - Mueller, Peter T1 - Articulated rods - a novel class of molecular rods based on oligospiroketals (OSK) JF - Beilstein journal of organic chemistry N2 - We developed a new type of molecular rods consisting of two (or more) rigid units linked by a flexible joint. Consequently we called these constructs articulated rods (ARs). The syntheses of ARs were carried out by a flexible and modular approach providing access to a number of compounds with various functionalizations in terminal positions. First applications were presented with pyrene, cinnamoyl and anthracenyl labelled ARs. KW - articulated rods KW - click chemistry KW - molecular rods KW - oligospiroketals KW - pyrene excimer Y1 - 2015 U6 - https://doi.org/10.3762/bjoc.11.11 SN - 1860-5397 VL - 11 SP - 74 EP - 84 PB - Beilstein-Institut zur Förderung der Chemischen Wissenschaften CY - Frankfurt, Main ER - TY - GEN A1 - Klaper, M. A1 - Wessig, Pablo A1 - Linker, Torsten T1 - Base catalysed decomposition of anthracene endoperoxide N2 - Catalytic amounts of a weak base are sufficient to induce the decomposition of anthracene endoperoxides to anthraquinone. The mechanism has been elucidated by isolation of intermediates in combination with DFT calculations. The whole process is suitable for the convenient generation of hydrogen peroxide under very mild conditions. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 219 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89676 SP - 1210 EP - 1213 ER - TY - JOUR A1 - Klaper, M. A1 - Wessig, Pablo A1 - Linker, Torsten T1 - Base catalysed decomposition of anthracene endoperoxide JF - Chemical communications : ChemComm N2 - Catalytic amounts of a weak base are sufficient to induce the decomposition of anthracene endoperoxides to anthraquinone. The mechanism has been elucidated by isolation of intermediates in combination with DFT calculations. The whole process is suitable for the convenient generation of hydrogen peroxide under very mild conditions. Y1 - 2015 U6 - https://doi.org/10.1039/C5CC08606J SN - 1364-548X IS - 52 SP - 1210 EP - 1213 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Boese, Adrian Daniel T1 - Basis set limit coupled-cluster studies of hydrogen-bonded systems JF - Molecular physics N2 - As hydrogen-bonded systems are of utmost importance in especially biological and chemical systems, a new set of highly accurate reference dissociation energies, denoted HB49, is devised. For the molecules in this set, the basis set convergence of post-Hartree-Fock methods, including F12 methods, is investigated. Using combined Moller-Plesset perturbation theory (MP2) and CCSD(T) approaches for energies and MP2 and QCISD(T) for gradients, we achieve CCSD(T) accuracy, which has been determined before to yield an accuracy of 0.2 kJ/mol for a subset of HB49. Both conventional extrapolation techniques and F12 techniques are competitive with each other. By using MP2+Delta CCSD(T), a rather fast basis set convergence is obtained when both basis sets are carefully chosen. KW - coupled-cluster KW - hydrogen bonds KW - ab initio KW - F12 methods Y1 - 2015 U6 - https://doi.org/10.1080/00268976.2014.1001806 SN - 0026-8976 SN - 1362-3028 VL - 113 IS - 13-14 SP - 1618 EP - 1629 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - JOUR A1 - Strauch, Peter A1 - Neumann, Mike A1 - Kelling, Alexandra A1 - Schilde, Uwe T1 - Bis(1,2-dithiosquarato)nickelates(II): Synthesis, Structure, EPR and Thermal Behavior JF - Acta chimica Slovenica N2 - 1,2-Dithiosquaratonickelates are available by direct synthesis from metal salts with dipotassium-1,2-dithiosquarate and the appropriate counter cations. The synthesis and characterization, including mass spectrometry, of a series 1,2-dithiosquaratonickelates(II), [Ni(dtsq)(2)](2-), with several "onium" cations is reported and the X-ray structures of two diamagnetic complexes, (HexPh(3)P)(2)[Ni(dtsq)(2)] and (BuPh3P)(2)[Ni(dtsq)(2)] with sterically demanding counter ions are presented. The diamagnetic nickel complexes have been doped as host lattices with traces of Cu(II) to measure EPR for additional structural information. The thermal behavior of this series is studied by thermogravimetry and differential thermal analysis (TG/DTA). The thermolysis in air as well as under nitrogen atmosphere of these complexes results in nickel oxide nano-particles in all cases, which are characterized by X-ray powder diffraction. KW - 1,2-Dithiosquarate,1,2-Dithiosquaratonickelate KW - X-ray structure KW - TG/DTA KW - Nickel oxide KW - EPR spectroscopy Y1 - 2015 SN - 1318-0207 SN - 1580-3155 VL - 62 IS - 2 SP - 288 EP - 296 PB - Drustvo CY - Ljubljana ER - TY - JOUR A1 - Bartoloni, Marco A1 - Jin, Xian A1 - Marcaida, Maria José A1 - Banha, Joao A1 - Dibonaventura, Ivan A1 - Bongoni, Swathi A1 - Bartho, Kathrin A1 - Gräbner, Olivia A1 - Sefkow, Michael A1 - Darbre, Tamis A1 - Reymond, Jean-Louis T1 - Bridged bicyclic peptides as potential drug scaffolds BT - synthesis, structure, protein binding and stability JF - Chemical Science N2 - Double cyclization of short linear peptides obtained by solid phase peptide synthesis was used to prepare bridged bicyclic peptides (BBPs) corresponding to the topology of bridged bicyclic alkanes such as norbornane. Diastereomeric norbornapeptides were investigated by 1H-NMR, X-ray crystallography and CD spectroscopy and found to represent rigid globular scaffolds stabilized by intramolecular backbone hydrogen bonds with scaffold geometries determined by the chirality of amino acid residues and sharing structural features of β-turns and α-helices. Proteome profiling by capture compound mass spectrometry (CCMS) led to the discovery of the norbornapeptide 27c binding selectively to calmodulin as an example of a BBP protein binder. This and other BBPs showed high stability towards proteolytic degradation in serum. Y1 - 2015 U6 - https://doi.org/10.1039/C5SC01699A SN - 2041-6520 SN - 2041-6539 VL - 10 IS - 6 SP - 5473 EP - 5490 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Bartoloni, Marco A1 - Jin, Xian A1 - Marcaida, Maria José A1 - Banha, Joao A1 - Dibonaventura, Ivan A1 - Bongoni, Swathi A1 - Bartho, Kathrin A1 - Gräbner, Olivia A1 - Sefkow, Michael A1 - Darbre, Tamis A1 - Reymond, Jean-Louis T1 - Bridged bicyclic peptides as potential drug scaffolds BT - synthesis, structure, protein binding and stability N2 - Double cyclization of short linear peptides obtained by solid phase peptide synthesis was used to prepare bridged bicyclic peptides (BBPs) corresponding to the topology of bridged bicyclic alkanes such as norbornane. Diastereomeric norbornapeptides were investigated by 1H-NMR, X-ray crystallography and CD spectroscopy and found to represent rigid globular scaffolds stabilized by intramolecular backbone hydrogen bonds with scaffold geometries determined by the chirality of amino acid residues and sharing structural features of β-turns and α-helices. Proteome profiling by capture compound mass spectrometry (CCMS) led to the discovery of the norbornapeptide 27c binding selectively to calmodulin as an example of a BBP protein binder. This and other BBPs showed high stability towards proteolytic degradation in serum. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 197 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81239 ER - TY - JOUR A1 - Eisold, Ursula A1 - Sellrie, Frank A1 - Schenk, Jörg A. A1 - Lenz, Christine A1 - Stöcklein, Walter F. M. A1 - Kumke, Michael Uwe T1 - Bright or dark immune complexes of anti-TAMRA antibodies for adapted fluorescence-based bioanalysis JF - Analytical & bioanalytical chemistry N2 - Fluorescence labels, for example fluorescein or rhodamin derivatives, are widely used in bioanalysis applications including lateral-flow assays, PCR, and fluorescence microscopy. Depending on the layout of the particular application, fluorescence quenching or enhancement may be desired as the detection principle. Especially for multiplexed applications or high-brightness requirements, a tunable fluorescence probe can be beneficial. The alterations in the photophysics of rhodamine derivatives upon binding to two different anti-TAMRA antibodies were investigated by absorption and fluorescence-spectroscopy techniques, especially determining the fluorescence decay time and steady-state and time-resolved fluorescence anisotropy. Two monoclonal anti-TAMRA antibodies were generated by the hybridoma technique. Although surface-plasmon-resonance measurements clearly proved the high affinity of both antibodies towards 5-TAMRA, the observed effects on the fluorescence of rhodamine derivatives were very different. Depending on the anti-TAMRA antibody either a strong fluorescence quenching (G71-DC7) or a distinct fluorescence enhancement (G71-BE11) upon formation of the immune complex was observed. Additional rhodamine derivatives were used to gain further information on the binding interaction. The data reveal that such haptens as 5-TAMRA could generate different paratopes with equal binding affinities but different binding interactions, which provide the opportunity to adapt bioanalysis methods including immunoassays for optimized detection principles for the same hapten depending on the specific requirements. KW - mAb KW - Fluorescence KW - Anisotropy KW - Exciplex KW - Energy-transfer probe Y1 - 2015 U6 - https://doi.org/10.1007/s00216-015-8538-0 SN - 1618-2642 SN - 1618-2650 VL - 407 IS - 12 SP - 3313 EP - 3323 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Megow, Jörg A1 - Körzdörfer, Thomas A1 - Renger, Thomas A1 - Sparenberg, Mino A1 - Blumstengel, Sylke A1 - Henneberger, Fritz A1 - May, Volkhard T1 - Calculating Optical Absorption Spectra of Thin Polycrystalline Organic Films: Structural Disorder and Site-Dependent van der Waals Interaction JF - The journal of physical chemistry : C, Nanomaterials and interfaces N2 - We propose a new approach for calculating the change of the absorption spectrum of a molecule when moved from the gas phase to a crystalline morphology. The so-called gas-to-crystal shift Delta epsilon(m) is mainly caused by dispersion effects and depends sensitively on the molecules specific position in the nanoscopic setting. Using an extended dipole approximation, we are able to divide Delta epsilon(m)= -QW(m) in two factors, where Q depends only on the molecular species and accounts for all nonresonant electronic transitions contributing to the dispersion while W-m is a geometry factor expressing the site dependence of the shift in a given molecular structure. The ability of our approach to predict absorption spectra is demonstrated using the example of polycrystalline films of 3,4,9,10-perylenetetracarboxylic diimide (PTCDI). Y1 - 2015 U6 - https://doi.org/10.1021/acs.jpcc.5b01587 SN - 1932-7447 VL - 119 IS - 10 SP - 5747 EP - 5751 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Koch, Andreas T1 - Characterization and quantification of quasi-aromaticity by spatial magnetic properties (TSNMRS) JF - Tetrahedron N2 - The spatial magnetic properties (Through Space NMR Shieldings-TSNMRS) of various types of structures with suggested quasi-aromaticity (a summaring topic: in detail push pull, captodative, chelate, supramolecular aromaticity, etc.) have been computed, are visualized as Isochemical Shielding Surfaces (ICSS) of various size/direction and examined subject to identify and quantify present (partial) aromaticity. While the TSNMRS approach proves really helpful [even in cases of (4n+2) pi-electron cyclic moieties formed via non-covalent polar interactions] quasi-aromaticity suggested for enol forms of 1,3-dicarbonyl compounds via resonance-assisted intramolecular and intermolecular hydrogen bonding cannot be confirmed. (C) 2015 Elsevier Ltd. All rights reserved. KW - Quasi-aromaticity KW - Ring current effect KW - Anisotropy effect KW - Theoretical calculations KW - ICSS KW - TSNMRS Y1 - 2015 U6 - https://doi.org/10.1016/j.tet.2015.06.019 SN - 0040-4020 VL - 71 IS - 33 SP - 5275 EP - 5284 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Wang, Li A1 - Baudis, Stefan A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Characterization of bi-layered magnetic nanoparticles synthesized via two-step surface-initiated ring-opening polymerization JF - Pure and applied chemistry : official journal of the International Union of Pure and Applied Chemistry N2 - A versatile strategy to integrate multiple functions in a polymer based material is the formation of polymer networks with defined nanostructures. Here, we present synthesis and comprehensive characterization of covalently surface functionalized magnetic nanoparticles (MNPs) comprising a bi-layer oligomeric shell, using Sn(Oct)(2) as catalyst for a two-step functionalization. These hydroxy-terminated precursors for degradable magneto-and thermo-sensitive polymer networks were prepared via two subsequent surfaceinitiated ring-opening polymerizations (ROPs) with omega-pentadecalactone and e-caprolactone. A two-step mass loss obtained in thermogravimetric analysis and two distinct melting transitions around 50 and 85 degrees C observed in differential scanning calorimetry experiments, which are attributed to the melting of OPDL and OCL crystallites, confirmed a successful preparation of the modified MNPs. The oligomeric coating of the nanoparticles could be visualized by transmission electron microscopy. The investigation of degrafted oligomeric coatings by gel permeation chromatography and H-1-NMR spectroscopy showed an increase in number average molecular weight as well as the presence of signals related to both of oligo(omega-pentadecalactone) (OPDL) and oligo(e-caprolactone) (OCL) after the second ROP. A more detailed analysis of the NMR results revealed that only a few.-pentadecalactone repeating units are present in the degrafted oligomeric bi-layers, whereby a considerable degree of transesterification could be observed when OPDL was polymerized in the 2nd ROP step. These findings are supported by a low degree of crystallinity for OPDL in the degrafted oligomeric bi-layers obtained in wide angle X-ray scattering experiments. Based on these findings it can be concluded that Sn(Oct)(2) was suitable as catalyst for the preparation of nanosized bi-layered coated MNP precursors by a two-step ROP. KW - degradable polyester KW - magnetic nanoparticles KW - nanoparticle characterization KW - NICE-2014 KW - ring opening polymerization KW - surface functionalization Y1 - 2015 U6 - https://doi.org/10.1515/pac-2015-0607 SN - 0033-4545 SN - 1365-3075 VL - 87 IS - 11-12 SP - 1085 EP - 1097 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Bauer, Monika A1 - Hartmann, Lutz A1 - Kleinpeter, Erich A1 - Kuschel, Frank A1 - Pithart, Cornelia A1 - Weissflog, Wolfgang T1 - Chiral Dopants Derived from Ephedrine/Pseudoephedrine: Structure and Medium Effects on the Helical Twisting Power JF - Molecular crystals and liquid crystals N2 - Chiral dopants were obtained by acylation of enantiomerically pure ephedrine and pseudoephedrine with promesogenic carbonyl reagents. The products have been investigated with respect to their chiral transfer ability on nematic host matrices characterized by extreme differences of the dielectric anisotropy. It has been found that the medium dependence of the helicity induction nearly disappears at reduced temperatures. Based on variable temperature H-1 NMR studies on monoacylated homologues, the estimated coalescence temperatures and free activation enthalpies for the hindered rotation around C-N bonds could be correlated with the helical twisting power. Measurements by dielectric spectroscopy reveal the correlation between the molar mass of substituents linked to the chiral building block and the dynamic glass transition of corresponding chiral dopants. Furthermore, the effect of intramolecular and intermolecular hydrogen bonds has been studied by ATR-FTIR spectroscopy. KW - ephedrine/pseudoephedrine KW - Chiral dopants KW - ATR-FTIR KW - molecular structure KW - dielectric spectroscopy KW - H-1 NMR Y1 - 2015 U6 - https://doi.org/10.1080/15421406.2014.949592 SN - 1542-1406 SN - 1563-5287 VL - 608 IS - 1 SP - 14 EP - 24 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - JOUR A1 - Kröner, Dominik A1 - Gaebel, Tina T1 - Circular Dichroism in Mass Spectrometry: Quantum Chemical Investigations for the Differences between (R)-3-Methylcyclopentanone and Its Cation JF - The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment & general theory N2 - In mass spectrometry enantiomers can be distinguished by multiphoton ionization employing circular polarized laser pulses. The circular dichroism (CD) is detected from the normalized difference in the ion yield after excitation with light of opposite handedness. While there are cases in which fragment and parent ions exhibit the same sign of the CD in the ion yield, several experiments show that they might also differ in sign and magnitude. Supported by experimental observations it has been proposed that the parent ion, once it has been formed, is further excited by the laser, which may result in a change of the CD in the ion yield of the formed fragments compared to the parent ion. To gain a deeper insight in possible excitation pathways we calculated and compared the electronic CD absorption spectra of neutral and cationic (R)-3-methylcyclopentanone, applying density functional theory. In addition, electron wavepacket dynamics were used to compare the CD of one- and two-photon transitions. Our results support the proposed subsequent excitation of the parent ion as a possible origin of the difference of the CD in the ion yield between parent ion and fragments. Y1 - 2015 U6 - https://doi.org/10.1021/acs.jpca.5b05247 SN - 1089-5639 VL - 119 IS - 34 SP - 9167 EP - 9177 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kathrein, Christine C. A1 - Bai, Wubin A1 - Currivan-Incorvia, Jean Anne A1 - Liontos, George A1 - Ntetsikas, Konstantinos A1 - Avgeropoulos, Apostolos A1 - Böker, Alexander A1 - Tsarkova, Larisa A1 - Ross, Caroline A. T1 - Combining Graphoepitaxy and Electric Fields toward Uniaxial Alignment of Solvent-Annealed Polystyrene-b-Poly(dimethylsiloxane) Block Copolymers JF - Chemistry of materials : a publication of the American Chemical Society N2 - We report a combined directing effect of the simultaneously applied graphoepitaxy and electric field on the self-assembly of cylinder forming polystyrene-b-poly(dimethylsiloxane) block copolymer in thin films. A correlation length of up to 20 mu m of uniaxial ordered striped patterns is an order of magnitude greater than that produced by either graphoepitaxy or electric field alignment alone and is achieved at reduced annealing times. The angle between the electric field direction and the topographic guides as well as the dimensions of the trenches affected both the quality of the ordering and the direction of the orientation of cylindrical domains: parallel or perpendicular to the topographic features. We quantified the interplay between the electric field and the geometry of the topographic structures by constructing the phase diagram of microdomain orientation. This combined approach allows the fabrication of highly ordered block copolymer structures using macroscopically prepatterned photolithographic substrates. Y1 - 2015 U6 - https://doi.org/10.1021/acs.chemmater.5b03354 SN - 0897-4756 SN - 1520-5002 VL - 27 IS - 19 SP - 6890 EP - 6898 PB - American Chemical Society CY - Washington ER - TY - GEN A1 - Lorenz, Ulf A1 - Saalfrank, Peter T1 - Comparing thermal wave function methods for multi-configuration time-dependent Hartree simulations (vol 140, 044106, 2014) T2 - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr Y1 - 2015 U6 - https://doi.org/10.1063/1.4938051 SN - 0021-9606 SN - 1089-7690 VL - 143 IS - 22 PB - American Institute of Physics CY - Melville ER - TY - JOUR A1 - Vukicevic, Radovan A1 - Neffe, Axel T. A1 - Luetzow, Karola A1 - Pierce, Benjamin F. A1 - Lendlein, Andreas T1 - Conditional Ultrasound Sensitivity of Poly[(N-isopropylacrylamide)-co-(vinyl imidazole)] Microgels for Controlled Lipase Release JF - Macromolecular rapid communications N2 - Triggering the release of cargo from a polymer network by ultrasonication as an external, non-invasive stimulus can be an interesting concept for on-demand release. Here, it is shown that, in pH-and thermosensitive microgels, the ultrasound sensitivity of the polymer network depends on the external conditions. Crosslinked poly[(N-isopropylacrylamide)-co-(vinyl imidazole)] microgels showed a volume phase transition temperature (VPTT) of 25-50 degrees C, which increases with decreasing pH. Above the VPTT the polymer chains are collapsed, while below VPTT they are extended. Only in the case of maximum observed swelling, where the polymer chains are expanded, the microgels are mechanically fragmented through ultrasonication. In contrast, when the polymer chains are partially collapsed it is not possible to manipulate the microgels by ultrasound. Additionally, the ultrasound-induced on-demand release of wheat germ lipase from the microgels could be demonstrated successfully. The principle of conditional ultrasound sensitivity is likely to be general and can be used for selection of matrix-cargo combinations. KW - ultrasound KW - polymers KW - microgels KW - lipase release KW - controlled release KW - thermoresponsive polymers KW - biomaterials Y1 - 2015 U6 - https://doi.org/10.1002/marc.201500311 SN - 1022-1336 SN - 1521-3927 VL - 36 IS - 21 SP - 1891 EP - 1896 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Saatchi, Mersa A1 - Behl, Marc A1 - Nöchel, Ulrich A1 - Lendlein, Andreas T1 - Copolymer Networks From Oligo(epsilon-caprolactone) and n-Butyl Acrylate Enable a Reversible Bidirectional Shape-Memory Effect at Human Body Temperature JF - Macromolecular rapid communications N2 - Exploiting the tremendous potential of the recently discovered reversible bidirectional shape-memory effect (rbSME) for biomedical applications requires switching temperatures in the physiological range. The recent strategy is based on the reduction of the melting temperature range (T-m) of the actuating oligo(epsilon-caprolactone) (OCL) domains in copolymer networks from OCL and n-butyl acrylate (BA), where the reversible effect can be adjusted to the human body temperature. In addition, it is investigated whether an rbSME in the temperature range close or even above T-m,T-offset (end of the melting transition) can be obtained. Two series of networks having mixtures of OCLs reveal broad T(m)s from 2 degrees C to 50 degrees C and from -10 degrees C to 37 degrees C, respectively. In cyclic, thermomechanical experiments the rbSME can be tailored to display pronounced actuation in a temperature interval between 20 degrees C and 37 degrees C. In this way, the application spectrum of the rbSME can be extended to biomedical applications. KW - body temperature KW - broad melting temperature range KW - orientational memory KW - reversible bidirectional shape-memory polymer KW - copolymer networks Y1 - 2015 U6 - https://doi.org/10.1002/marc.201400729 SN - 1022-1336 SN - 1521-3927 VL - 36 IS - 10 SP - 880 EP - 884 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Wessig, Pablo A1 - Budach, Dennis B. A1 - Thünemann, Andreas F. T1 - Dendrimers with Oligospiroketal (OSK) Building Blocks: Synthesis and Properties JF - Chemistry - a European journal N2 - The development of novel dendrimers containing oligospiroketal (OSK) rods as building blocks is described. The linkage between the core unit (CU), branching units (BU), and OSK rods relies on the CuAAC reaction between terminal alkynes and azides. Two different strategies of dendrimer synthesis were investigated and it was found that the convergent approach is clearly superior to the divergent one. SAXS measurements and MD simulations indicate that the obtained dendrimer features a globular structure with very low density. Obviously, the OSK rods stabilize a rather loose mass-fractal structure. KW - click chemistry KW - dendrimers KW - molecular rods KW - oxygen heterocycles KW - SAXS Y1 - 2015 U6 - https://doi.org/10.1002/chem.201501386 SN - 0947-6539 SN - 1521-3765 VL - 21 IS - 29 SP - 10466 EP - 10471 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Boese, Adrian Daniel T1 - Density Functional Theory and Hydrogen Bonds: Are We There Yet? JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - Density functional theory (DFT) has become more successful at introducing dispersion interactions, and can be thus applied to a wide range of systems. Amongst these are systems that contain hydrogen bonds, which are extremely important for the biological regime. Here, the description of hydrogen-bonded interactions by DFT with and without dispersion corrections is investigated. For small complexes, for which electrostatics are the determining factor in the intermolecular interactions, the inclusion of dispersion with most functionals yields large errors. Only for larger systems, in which van der Waals interactions are more important, do dispersion corrections improve the performance of DFT for hydrogen-bonded systems. None of the studied functionals, including double hybrid functionals (with the exception of DSD-PBEP86 without dispersion corrections), are more accurate than MP2 for the investigated species. KW - ab initio calculations KW - basis sets KW - density functional calculations KW - hydrogen bonds KW - intermolecular interactions Y1 - 2015 U6 - https://doi.org/10.1002/cphc.201402786 SN - 1439-4235 SN - 1439-7641 VL - 16 IS - 5 SP - 978 EP - 985 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Federico, Stefania A1 - Pierce, Benjamin F. A1 - Piluso, Susanna A1 - Wischke, Christian A1 - Lendlein, Andreas A1 - Neffe, Axel T. T1 - Design of Decorin-Based Peptides That Bind to CollagenI and their Potential as Adhesion Moieties in Biomaterials JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Mimicking the binding epitopes of protein-protein interactions by using small peptides is important for generating modular biomimetic systems. A strategy is described for the design of such bioactive peptides without accessible structural data for the targeted interaction, and the effect of incorporating such adhesion peptides in complex biomaterial systems is demonstrated. The highly repetitive structure of decorin was analyzed to identify peptides that are representative of the inner and outer surface, and it was shown that only peptides based on the inner surface of decorin bind to collagen. The peptide with the highest binding affinity for collagenI, LHERHLNNN, served to slow down the diffusion of a conjugated dye in a collagen gel, while its dimer could physically crosslink collagen, thereby enhancing the elastic modulus of the gel by one order of magnitude. These results show the potential of the identified peptides for the design of biomaterials for applications in regenerative medicine. KW - biomaterials KW - collagen KW - gels KW - peptides KW - protein-protein interactions Y1 - 2015 U6 - https://doi.org/10.1002/anie.201505227 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 37 SP - 10980 EP - 10984 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Morgner, Frank A1 - Lecointre, Alexandre A1 - Charbonniere, Loic J. A1 - Löhmannsröben, Hans-Gerd T1 - Detecting free hemoglobin in blood plasma and serum with luminescent terbium complexes JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Hemolysis, the rupturing of red blood cells, can result from numerous medical conditions (in vivo) or occur after collecting blood specimen or extracting plasma and serum out of whole blood (in vitro). In clinical laboratory practice, hemolysis can be a serious problem due to its potential to bias detection of various analytes or biomarkers. Here we present the first "mix-and-measure' method to assess the degree of hemolysis in biosamples using luminescence spectroscopy. Luminescent terbium complexes (LTC) were studied in the presence of free hemoglobin (Hb) as indicators for hemolysis in TRIS-buffer, and in fresh human plasma with absorption, excitation and emission measurements. Our findings indicate dynamic as well as resonance energy transfer (FRET) between the LTC and the porphyrin ligand of hemoglobin. This transfer leads to a decrease in luminescence intensity and decay time even at nanomolar hemoglobin concentrations either in buffer or plasma. Luminescent terbium complexes are very sensitive to free hemoglobin in buffer and blood plasma. Due to the instant change in luminescence properties of the LTC in presence of Hb it is possible to access the concentration of hemoglobin via spectroscopic methods without incubation time or further treatment of the sample thus enabling a rapid and sensitive detection of hemolysis in clinical diagnostics. Y1 - 2015 U6 - https://doi.org/10.1039/c4cp04206a SN - 1463-9076 SN - 1463-9084 VL - 17 IS - 3 SP - 1740 EP - 1745 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wirth, Jonas A1 - Hatter, Nino A1 - Drost, Robert A1 - Umbach, Tobias R. A1 - Barja, Sara A1 - Zastrow, Matthias A1 - Rück-Braun, Karola A1 - Pascual, Jose Ignacio A1 - Saalfrank, Peter A1 - Franke, Katharina J. T1 - Diarylethene Molecules on a Ag(111) Surface: Stability and Electron-Induced Switching JF - The journal of physical chemistry : C, Nanomaterials and interfaces N2 - Diarylethene derivatives are photochromic molecular switches, undergoing a ring-opening/-closing reaction by illumination with light. The symmetry of the closed form is determined by the WoodWard Hoffinann rules according to which the reaction proceeds by corirotatory rotation -in that case. Here, we show by a cOrnbined approach of scanning tunneling microscopy (STM) and density functional theory (DFT) calculations that the Open isomer of 4,4'-(4,4'-(perfluorocydopent-1-ene-1,2-diyl)bis(5-methyl-thiophent-4,2,4-dipyridine) (PDTE) retains its open form upon adsorption on a Ag(111) surface. It caribe switched into a closed form, which we identify as the digrotatOly cydization product, by controlled manipulation 'With the STM tip, Evidence of an electric-field dependent switching-process 'is interpreted on the basis of a Simple electroStatic Model, which suggests that the reaction proceedS via an "upright" intermediate state. This pathway thus strongly differs from the switching reaction in solution. Y1 - 2015 U6 - https://doi.org/10.1021/jp5122036 SN - 1932-7447 VL - 119 IS - 9 SP - 4874 EP - 4883 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Attenberger, Bianca A1 - Moussa, Mehdi El Sayed A1 - Brietzke, Thomas Martin A1 - Vreshch, Volodimir A1 - Holdt, Hans-Jürgen A1 - Lescop, Christophe A1 - Scheer, Manfred T1 - Discrete Polymetallic Arrangements of Ag-I and Cu-I Ions Based on Multiple Bridging Phosphane Ligands and pi-pi Interactions JF - European journal of inorganic chemistry : a journal of ChemPubSoc Europe N2 - A simple and straightforward approach to new polymetallic Ag-I and Cu-I supramolecules is presented. The reaction of N,P,N,P,N ligand 2 with Ag-I ions affords a trimetallic complex bearing a triangular Ag-3 core; metallophilic interactions are stabilized by ligands that display a multiple bridging coordination mode as 10-electron donors. Heteroleptic polymetallic Ag-I and Cu-I complexes based on ligand 2 and the 1,12-diazaperylene (dape) ligand are obtained by an alternative molecular organization of the polymetallic arrays compared to that in homoleptic complexes of ligand 2. KW - Heterocycles KW - N KW - P ligands KW - Pi interactions KW - Polyaromatic fragments KW - Supramolecular chemistry Y1 - 2015 U6 - https://doi.org/10.1002/ejic.201500445 SN - 1434-1948 SN - 1099-0682 IS - 18 SP - 2934 EP - 2938 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schmidt, Bernd A1 - Elizarov, Nelli A1 - Schilde, Uwe A1 - Kelling, Alexandra T1 - Dual Role of Acetanilides: Traceless Removal of a Directing Group through Deacetylation/Diazotation and Palladium-Catalyzed C-C-Coupling Reactions JF - The journal of organic chemistry N2 - The acetamide group enables regioselective oxidative ortho-C-H activation reactions, such as Pd-catalyzed acylation. The synthetic utility of these transformations can be significantly enhanced by using the acetamide as a quasi-leaving group in a subsequent conventional Pd-catalyzed coupling or cross-coupling reaction. The concept is illustrated herein for the synthesis of o-alkenyl- and o-arylphenones, which have potential for the synthesis of arylated aromatic heterocycles. Y1 - 2015 U6 - https://doi.org/10.1021/acs.joc.5b00272 SN - 0022-3263 VL - 80 IS - 9 SP - 4223 EP - 4234 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Pester, Christian W. A1 - Schmidt, Kristin A1 - Ruppel, Markus A1 - Schoberth, Heiko G. A1 - Böker, Alexander T1 - Electric-Field-Induced Order-Order Transition from Hexagonally Perforated Lamellae to Lamellae JF - Macromolecules : a publication of the American Chemical Society N2 - Block copolymers form a variety of microphase morphologies due to their ability to phase separate. The hexagonally perforated lamellar (HPL) morphology represents an unusually long-lived, nonequilibrium transient structure between lamellar and cylindrical phases. We present a detailed study of a concentrated, HPL-forming poly(styrene-b-isoprene) diblock copolymer solution in toluene in the presence of an electric field. We will show that this phase is readily aligned by a moderate electric field and provide experimental evidence for an electric-field-induced order order transition toward the lamellar phase under sufficiently strong fields. This process is shown to be fully reversible as lamellar perforations reconnect immediately upon secession of the external stimulus, recovering highly aligned perforated lamellae. Y1 - 2015 U6 - https://doi.org/10.1021/acs.macromol.5b01336 SN - 0024-9297 SN - 1520-5835 VL - 48 IS - 17 SP - 6206 EP - 6213 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Fandrich, Artur A1 - Buller, Jens A1 - Schäfer, Daniel A1 - Wischerhoff, Erik A1 - Laschewsky, André A1 - Lisdat, Fred T1 - Electrochemical characterization of a responsive macromolecular interface on gold JF - Physica status solidi : A, Applications and materials science N2 - This study reports on the investigation of a thermoresponsive polymer as a thin film on electrodes and the influence of coupling a peptide and an antibody to the film. The utilized polymer from the class of poly(oligoethylene glycol)-methacrylate polymers (poly(OEGMA)) with carboxy functions containing side chains was synthesized and properly characterized in aqueous solutions. The dependence of the cloud point on the pH of the surrounding media is discussed. The responsive polymer was immobilized on gold electrodes as shown by electrochemical, quartz crystal microbalance (QCM), and atomic force microscopy (AFM) techniques. The temperature dependent behavior of the polymer covalently grafted to gold substrates is investigated using cyclic voltammetry (CV) in ferro-/ferricyanide solution. Significant changes in the slope of the temperature-dependence of the voltammetric peak current and the peak separation values clearly indicate the thermally induced conformational change on the surface. Finally, a biorecognition reaction between a short FLAG peptide (N-Asp-Tyr-Lys-Asp-Asp-Asp-Asp-Lys-C) covalently immobilized on the polymer interface and the corresponding IgG antibody was performed. The study shows that the responsiveness of the electrode is retained after peptide coupling and antibody binding, although the response is diminished. KW - biorecognition reactions KW - cyclic voltammetry KW - electrodes KW - gold KW - interfaces KW - responsive polymers Y1 - 2015 U6 - https://doi.org/10.1002/pssa.201431698 SN - 1862-6300 SN - 1862-6319 VL - 212 IS - 6 SP - 1359 EP - 1367 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Tritschler, U. A1 - Beck, F. A1 - Schlaad, Helmut A1 - Cölfen, Helmut T1 - Electrochromic properties of self-organized multifunctional V2O5-polymer hybrid films JF - Journal of materials chemistry : C, Materials for optical and electronic devices N2 - Bio-inspired V2O5-polymer hybrid films were prepared following a one-step self-organization procedure based on liquid crystal formation of organic and inorganic components. These materials were previously reported to exhibit advantageous mechanical properties, comparable to biomaterials, such as human bone and dentin. Here, we show that these hybrid films prepared via a fast and simple synthesis procedure have an additional function as an electrochromic material, exhibiting a long-term cycle stability under alternating potentials. The structures were found to remain intact without visible changes after more than hundred switching cycles and storing the devices for several weeks. Consequently, this multifunctional V2O5-polymer hybrid system shows great promise for various technical applications. Y1 - 2015 U6 - https://doi.org/10.1039/c4tc02138j SN - 2050-7526 SN - 2050-7534 VL - 3 IS - 5 SP - 950 EP - 954 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Ryabchun, Alexander A1 - Bobrovsky, Alexey A1 - Stumpe, Joachim A1 - Shibaev, Valery T1 - Electroinduced Diffraction Gratings in Cholesteric Polymer with Phototunable Helix Pitch JF - Advanced optical materials N2 - For the first time the cholesteric mixture containing nematic polymer with small amount of chiral-photochromic dopant is used for electroinduced diffraction gratings production. The gratings are obtained by applying electric field to the planar-aligned cholesteric polymer layer causing its periodical distortion. Material developed permits manipulating supramolecular helical structure by means of UV exposure resulting in helix untwisting. Photo-controlling of helix pitch brings to change parameters of the electroinduced gratings. Due to macromolecular "nature" of the material one can easily stabilize electroinduced gratings by fast sample cooling. All-known cholesteric grating types are realized in the studied polymer material. It is observed that the grating vector can be oriented along or perpendicular to the rubbing direction of the cell. It is shown that the diffraction efficiency is dictated by grating type and the amplitude of the applied electric field and can achieve about 80%. Moreover, the period of gratings can be tuned upon UV light illumination. The possibility of 2D gratings creation is also demonstrated. The described material and approach gives an opportunity to easily fabricate a variety of diffraction gratings with flexibly controllable parameters. Such gratings can be potentially applied in optics, optoelectronics, and photonics as intelligent diffraction elements. Y1 - 2015 U6 - https://doi.org/10.1002/adom.201500293 SN - 2195-1071 VL - 3 IS - 10 SP - 1462 EP - 1469 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Taubert, Andreas T1 - Electrospinning of Ionogels: Current Status and Future Perspectives JF - European journal of inorganic chemistry : a journal of ChemPubSoc Europe N2 - Ionogels (IGs), also termed ion gels, are functional hybrid materials based on an ionic liquid (IL) and a polymeric, hybrid, or inorganic matrix. IGs combine the properties of the matrix such as mechanical strength with IL properties like high ionic conductivity, high thermal stability, or catalytic activity. IGs are thus attractive for many applications, but the vast majority of IGs made and published so far are bulk materials or dense films. Applications like sensing or catalysis, however, would benefit from IGs with high surface areas or defined surface morphologies or architectures. In spite of this, only relatively few examples of high-surface-area IGs have been made so far; this has mostly been achieved by electrospinning, which has proven to be a promising strategy towards advanced IGs. The current review discusses first developments and outlines the future potential of electrospun ionogels, predominantly from a materials and inorganic chemistry perspective. KW - Ionic liquids KW - Ionogels KW - Hybrid materials KW - Electrospinning KW - Heterogeneous catalysis KW - Sensors KW - Energy KW - Health Y1 - 2015 U6 - https://doi.org/10.1002/ejic.201402490 SN - 1434-1948 SN - 1099-0682 IS - 7 SP - 1148 EP - 1159 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Crone, Barbara A1 - Aschner, Michael A. A1 - Schwerdtle, Tanja A1 - Karst, Uwe A1 - Bornhorst, Julia T1 - Elemental bioimaging of Cisplatin in Caenorhabditis elegans by LA-ICP-MS N2 - cis-Diamminedichloroplatinum(II) (Cisplatin) is one of the most important and frequently used cytostatic drugs for the treatment of various solid tumors. Herein, a laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) method incorporating a fast and simple sample preparation protocol was developed for the elemental mapping of Cisplatin in the model organism Caenorhabditis elegans (C. elegans). The method allows imaging of the spatially-resolved elemental distribution of platinum in the whole organism with respect to the anatomic structure in L4 stage worms at a lateral resolution of 5 μm. In addition, a dose- and time-dependent Cisplatin uptake was corroborated quantitatively by a total reflection X-ray fluorescence spectroscopy (TXRF) method, and the elemental mapping indicated that Cisplatin is located in the intestine and in the head of the worms. Better understanding of the distribution of Cisplatin in this well-established model organism will be instrumental in deciphering Cisplatin toxicity and pharmacokinetics. Since the cytostatic effect of Cisplatin is based on binding the DNA by forming intra- and interstrand crosslinks, the response of poly(ADP-ribose)metabolism enzyme 1 (pme-1) deletion mutants to Cisplatin was also examined. Loss of pme-1, which is the C. elegans ortholog of human poly(ADP-ribose) polymerase 1 (PARP-1) led to disturbed DNA damage response. With respect to survival and brood size, pme-1 deletion mutants were more sensitive to Cisplatin as compared to wildtype worms, while Cisplatin uptake was indistinguishable. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 192 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-80031 SP - 1189 EP - 1195 ER - TY - JOUR A1 - Crone, Barbara A1 - Aschner, Michael A. A1 - Schwerdtle, Tanja A1 - Karst, Uwe A1 - Bornhorst, Julia T1 - Elemental bioimaging of Cisplatin in Caenorhabditis elegans by LA-ICP-MS JF - Metallomics N2 - cis-Diamminedichloroplatinum(II) (Cisplatin) is one of the most important and frequently used cytostatic drugs for the treatment of various solid tumors. Herein, a laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) method incorporating a fast and simple sample preparation protocol was developed for the elemental mapping of Cisplatin in the model organism Caenorhabditis elegans (C. elegans). The method allows imaging of the spatially-resolved elemental distribution of platinum in the whole organism with respect to the anatomic structure in L4 stage worms at a lateral resolution of 5 μm. In addition, a dose- and time-dependent Cisplatin uptake was corroborated quantitatively by a total reflection X-ray fluorescence spectroscopy (TXRF) method, and the elemental mapping indicated that Cisplatin is located in the intestine and in the head of the worms. Better understanding of the distribution of Cisplatin in this well-established model organism will be instrumental in deciphering Cisplatin toxicity and pharmacokinetics. Since the cytostatic effect of Cisplatin is based on binding the DNA by forming intra- and interstrand crosslinks, the response of poly(ADP-ribose)metabolism enzyme 1 (pme-1) deletion mutants to Cisplatin was also examined. Loss of pme-1, which is the C. elegans ortholog of human poly(ADP-ribose) polymerase 1 (PARP-1) led to disturbed DNA damage response. With respect to survival and brood size, pme-1 deletion mutants were more sensitive to Cisplatin as compared to wildtype worms, while Cisplatin uptake was indistinguishable. Y1 - 2015 U6 - https://doi.org/10.1039/c5mt00096c SN - 1756-591X SN - 1756-5901 VL - 2015 IS - 7 SP - 1189 EP - 1195 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Gambinossi, Filippo A1 - Sefcik, Lauren S. A1 - Wischerhoff, Erik A1 - Laschewsky, André A1 - Ferri, James K. T1 - Engineering Adhesion to Thermoresponsive Substrates: Effect of Polymer Composition on Liquid-Liquid-Solid Wetting JF - ACS applied materials & interfaces N2 - Adhesion control in liquidliquidsolid systems represents a challenge for applications ranging from self-cleaning to biocompatibility of engineered materials. By using responsive polymer chemistry and molecular self-assembly, adhesion at solid/liquid interfaces can be achieved and modulated by external stimuli. Here, we utilize thermosensitive polymeric materials based on random copolymers of di(ethylene glycol) methyl ether methacrylate (x = MEO(2)MA) and oligo(ethylene glycol) methyl ether methacrylate (y = OEGMA), that is, P(MEO(2)MA(x)-co-OEGMA(y)), to investigate the role of hydrophobicity on the phenomenon of adhesion. The copolymer ratio (x/y) dictates macromolecular changes enabling control of the hydrophilic-to-lipophilic balance (HBL) of the polymer brushes through external triggers such as ionic strength and temperature. We discuss the HBL of the thermobrushes in terms of the surface energy of the substrate by measuring the contact angle at waterdecaneP(MEO(2)MA(x)-co-OEGMA(y)) brush contact line as a function of polymer composition and temperature. Solid supported polyelectrolyte layers grafted with P(MEO(2)MA(x)-co-OEGMA(y)) display a transition in the wettability that is related to the lower critical solution temperature of the polymer brushes. Using experimental observation of the hydrophilic to hydrophobic transition by the contact angle, we extract the underlying energetics associated with liquidliquidsolid adhesion as a function of the copolymer ratio. The change in cellular attachment on P(MEO(2)MA(x)-co-OEGMA(y)) substrates of variable (x/y) composition demonstrates the subtle role of compositional tuning on the ability to control liquidliquidsolid adhesion in biological applications. KW - water/decane contact angle KW - thermoresponsive substrates KW - di(ethylene glycol) methy ether methacrylate KW - oligo(ethylene glycol) methyl ether methacrylate KW - hydrophilic-to-lipophilic balance KW - programmable adhesion Y1 - 2015 U6 - https://doi.org/10.1021/am507418m SN - 1944-8244 VL - 7 IS - 4 SP - 2518 EP - 2528 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Munzke, Dorit T1 - Faseroptische Spektroskopie mit hochfrequent modulierten Diodenlasern zur Analyse kleinster Volumina Y1 - 2015 ER - TY - GEN A1 - Vacogne, Charlotte D. A1 - Brosnan, Sarah M. A1 - Masic, Admir A1 - Schlaad, Helmut T1 - Fibrillar gels via the self-assembly of poly(L-glutamate)-based statistical copolymers N2 - Polypeptides having secondary structures often undergo self-assembly which can extend over multiple length scales. Poly(γ-benzyl-L-glutamate) (PBLG), for example, folds into α-helices and forms physical organogels, whereas poly(L-glutamic acid) (PLGA at acidic pH) or poly(L-glutamate) (PLG at neutral/basic pH) do not form hydrogels. We explored the gelation of modified PBLG and investigated the deprotection of the carboxylic acid moieties in such gels to yield unique hydrogels. This was accomplished through photo-crosslinking gelation of poly(γ-benzyl-L-glutamate-co-allylglycine) statistical copolymers in toluene, tetrahydrofuran, and 1,4-dioxane. Unlike most polymer-based chemical gels, our gels were prepared from dilute solutions (<20 g L−1, i.e., <2% w/v) of low molar mass polymers. Despite such low concentrations and molar masses, our dioxane gels showed high mechanical stability and little shrinkage; remarkably, they also exhibited a porous fibrillar network. Deprotection of the carboxylic acid moieties in dioxane gels yielded pH responsive and highly absorbent PLGA/PLG-based hydrogels (swelling ratio of up to 87), while preserving the network structure, which is an unprecedented feature in the context of crosslinked PLGA gels. These outstanding properties are highly attractive for biomedical materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 301 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102289 SP - 5040 EP - 5052 ER - TY - JOUR A1 - Vacogne, Charlotte D. A1 - Brosnan, Sarah M. A1 - Masic, Admir A1 - Schlaad, Helmut T1 - Fibrillar gels via the self-assembly of poly(L-glutamate)-based statistical copolymers JF - Polymer Chemistry N2 - Polypeptides having secondary structures often undergo self-assembly which can extend over multiple length scales. Poly(gamma-benzyl-L-glutamate) (PBLG), for example, folds into a-helices and forms physical organogels, whereas poly(L-glutamic acid) (PLGA at acidic pH) or poly(L-glutamate) (PLG at neutral/basic pH) do not form hydrogels. We explored the gelation of modified PBLG and investigated the deprotection of the carboxylic acid moieties in such gels to yield unique hydrogels. This was accomplished through photo-crosslinking gelation of poly(gamma-benzyl-L-glutamate-co-allylglycine) statistical copolymers in toluene, tetrahydrofuran, and 1,4-dioxane. Unlike most polymer-based chemical gels, our gels were prepared from dilute solutions (<20 g L-1, i.e., <2% w/v) of low molar mass polymers. Despite such low concentrations and molar masses, our dioxane gels showed high mechanical stability and little shrinkage; remarkably, they also exhibited a porous fibrillar network. Deprotection of the carboxylic acid moieties in dioxane gels yielded pH responsive and highly absorbent PLGA/PLG-based hydrogels (swelling ratio of up to 87), while preserving the network structure, which is an unprecedented feature in the context of crosslinked PLGA gels. These outstanding properties are highly attractive for biomedical materials. Y1 - 2015 U6 - https://doi.org/10.1039/c5py00491h SN - 1759-9954 SN - 1759-9962 VL - 6 IS - 28 SP - 5040 EP - 5052 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Cramer, Ashley D. A1 - Gambinossi, Filippo A1 - Wischerhoff, Erik A1 - Laschewsky, André A1 - Miller, Reinhard A1 - Ferri, James K. T1 - Flexible thermoresponsive nanomembranes at the aqueous-air interface JF - Chemical communications N2 - A synthetic pathway is described to construct thermoresponsive freestanding nanomembranes at the aqueous-air interface of a pendant drop. Dynamic control of the reaction kinetics allows formation of viscoelastic interfaces supporting anisotropic stresses and mechanical stability, which can be tuned by external stimuli. Y1 - 2015 U6 - https://doi.org/10.1039/c4cc07359b SN - 1359-7345 SN - 1364-548X VL - 51 IS - 5 SP - 877 EP - 880 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Primus, Philipp-Alexander A1 - Menski, Antonia A1 - Yeste, Maria Pilar A1 - Cauqui, Miguel Angel A1 - Kumke, Michael Uwe T1 - Fluorescence Line-Narrowing Spectroscopy as a Tool to Monitor Phase Transitions and Phase Separation in Efficient Nanocrystalline CexZr1-xO2:Eu3+ Catalyst Materials JF - The journal of physical chemistry : C, Nanomaterials and interfaces N2 - Despite the wide range of industrial applications for ceria-zirconia mixed oxides (CexZr1-xO2), the complex correlation between their atomic structure and catalytic performance is still under debate. Catalytically interesting CexZr1-xO2 nanomaterials can form homogeneous solid solutions and, depending on the composition, show phase separation under the formation of small domains. The characterization of homogeneity and atomic structure of these materials remains a major challenge. High-resolution emission spectroscopy recorded under cryogenic conditions using Eu3+ as a structural probe in doped CeZrO2 nanoparticles offers an effective way to identify the different atomic environments of the Eu3+ dopants and, subsequently, to monitor structural parameters of the ceria-zirconia mixed oxides. It is found that, in stoichiometric CeZrO2:Eu3+, phase separation occurs at elevated temperatures beginning with the gradual formation of (pseudo)cubic crystallites in the amorphous materials at 500 degrees C and a sudden phase separation into tetragonal, zirconia-rich and cubic, ceria-rich domains over 900 degrees C. The presented technique allows us to easily monitor subtle changes even in amorphous, high surface area samples, yielding structural information not accessible by conventional techniques such as X-ray diffraction (XRD) and Raman. Moreover, in reference experiments investigating the reducibility of largely unordered Ce0.2Zr0.8O2:Eu3+, the main reduction peak in temperature-programmed reduction measurements appeared at exceptionally low temperatures below 200 degrees C, thus suggesting the outstanding potential of this oxide to activate catalytic oxidation reactions. This effect was found to be dependent on the amount of Eu3+ dopant introduced into the CeZrO2 matrix as well as to be connected to the atomic structure of the catalyst material. Y1 - 2015 U6 - https://doi.org/10.1021/acs.jpcc.5b01271 SN - 1932-7447 VL - 119 IS - 19 SP - 10682 EP - 10692 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kedracki, Dawid A1 - Filippov, Sergey K. A1 - Gour, Nidhi A1 - Schlaad, Helmut A1 - Nardin, Corinne T1 - Formation of DNA-Copolymer Fibrils Through an Amyloid-Like Nucleation Polymerization Mechanism JF - Macromolecular rapid communications N2 - Conjugation of a hydrophobic poly(2-oxazoline) bearing tertiary amide groups along its backbone with a short single stranded nucleotide sequence results in an amphiphilic comb/graft copolymer, which organizes in fibrils upon direct dissolution in water. Supported by circular dichroism, atomic force microscopy, transmission electron microscopy, and scattering data, fibrils are formed through inter- and intramolecular hydrogen bonding between hydrogen accepting amide groups along the polymer backbone and hydrogen donating nucleic acid grafts leading to the formation of hollow tubes. KW - DNA copolymers KW - fibers KW - hydrogen bonding KW - nucleation polymerization KW - self-assembly Y1 - 2015 U6 - https://doi.org/10.1002/marc.201400728 SN - 1022-1336 SN - 1521-3927 VL - 36 IS - 8 SP - 768 EP - 773 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Plehn, Thomas A1 - Ziemann, Dirk A1 - Megow, Jörg A1 - May, Volkhard T1 - Frenkel to Wannier-Mott Exciton Transition: Calculation of FRET Rates for a Tubular Dye Aggregate Coupled to a CdSe Nanocrystal JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - The coupling is investigated of Frenkel-like exciton states formed in a tubular dye aggregate (TDA) to Wannier-Mott-like excitations of a semiconductor nanocrystal (NC). A double well TDA of the cyanine dye C8S3 with a length of 63.4 nm and a diameter of 14.7 nm is considered. The TDA interacts with a spherical Cd819Te630 NC of 4.5 nm diameter. Electronic excitations of the latter are described in a tight-binding model of the electrons and holes combined with a configuration interaction scheme to consider their mutual Coulomb coupling. To achieve a proper description of TDA excitons, a recently determined structure has been used, the energy transfer coupling has been defined as a screened interaction of atomic centered transition charges, and the site energies of the dye molecules have been the subject of a polarization correction. Even if both nanoparticles are in direct contact, the energy transfer coupling between the exciton levels of the TDA and of the NC stays below 1 meV. It results in FRET-type energy transfer with rates somewhat larger than 10(9)/s. They coincide rather well with recent preliminary experiments. Y1 - 2015 U6 - https://doi.org/10.1021/jp5111696 SN - 1520-6106 VL - 119 IS - 24 SP - 7467 EP - 7472 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Munzke, Dorit A1 - Böhm, Michael A1 - Reich, Oliver T1 - Gaseous Oxygen Detection Using Hollow-Core Fiber-Based Linear Cavity Ring-Down Spectroscopy JF - Journal of lightwave technology N2 - We demonstrate a method for the calibration-free and quantitative analysis of small volumes of gaseous samples. A 10 m hollow-core photonic bandgap fiber is used as the sample cell (volume = 0.44 mu L) and is placed inside a linear resonator setup. The application of cavity ring-down spectroscopy and in consideration of rather small coupling losses, this leads to an increased effective optical path length of up to 70 m. This implies a volume per optical interaction path length of 6.3 nL.m(-1). We used tunable diode laser spectroscopy at 760 nm and scanned the absorption for oxygen sensing. The optical loss due to sample absorption is obtained by measuring the ring-down time of light propagating inside the cavity. The resultant absorption coefficient shows a discrepancy of only 5.1% comparing to the HITRAN database. This approach is applicable for sensitive measurements if only submicroliter sample volumes are available. KW - Cavity ring-down spectroscopy KW - gas sensing KW - hollow-core photonic bandgap fiber KW - oxygen Y1 - 2015 U6 - https://doi.org/10.1109/JLT.2015.2397177 SN - 0733-8724 SN - 1558-2213 VL - 33 IS - 12 SP - 2524 EP - 2529 PB - Inst. of Electr. and Electronics Engineers CY - Piscataway ER - TY - THES A1 - Feldbusch, Elvira T1 - Geochemische Charakterisierung eines Formationsfluids im Unteren Perm T1 - Geochemical characterization of a formation fluid of Lower Permian reservoir BT - Herkunft, betriebsbedingte Prozesse und Rolle organischer Verbindungen im geothermischen Kreislauf BT - origin, operational processes and role of organic compounds in the geothermal cycle N2 - Diese Arbeit befasst sich mit der ganzheitlichen Betrachtung der Fluideigenschaften eines unterpermischen Reservoirs am Geothermie Forschungsstandort Groß Schönebeck (GrSk) bei Reservoirbedingungen und im Betrieb der Geothermieanlage. Die Untersuchungen zur Fluidherkunft ergeben, dass es sich um ein konnates Wasser meteorischen Ursprungs ohne den Einfluss der darüberliegenden Zechsteinwässer handelt. Die Ionen und Isotopenverhältnisse im Formationswasser gelöster Komponenten in GrSk belegen einen gemeinsamen Genesepfad mit Wässern anderer Rotliegend-Reservoire des Nordostdeutschen Beckens (NEGB). Die Isotopenverhältnisse von ⁸⁷Sr/⁸⁶Sr ≈ 0,7158 und von δ³⁴SV CDT ≈ 4,1 ‰ des Sulfats weisen auf die Anreicherung des Fluids mit schweren Isotopen durch die Fluid Gestein-Wechselwirkung mit Vulkaniten und Rotliegend Sandsteinen des Unteren Perms hin. Das im Formationswasser bei Reservoirbedingungen gelöste Gas (Gas/Wasser ≤ 2 bei STP) enthält Stickstoff (δ¹⁵NAir ≈ 0,6 ‰) und thermogenes Methan (δ¹³CV-PDB ≈ - 18 ‰) aus organischen Karbonablagerungen (Kerogen Typ - III Kohlen) hoher Reife. Die Isotopenverhältnisse der Edelgase belegen eine krustale Herkunft des Gasgemisches. Die berechnete Verweilzeit τ (⁴He) der Gase im Reservoir liegt zwischen 275 und 317 Ma und überschreitet damit bei gegebener Konzentration von Mutternukliden im Reservoirgestein das allgemein angenommene Zeitalter der Sedimentgruppe. Das lässt sich durch eine Zuwanderung von Gasen aus älteren Sedimentfolgen erklären. Die Veränderungen der physikochemischen Fluidparameter während des Anlagenbetriebs sind hauptsächlich temperaturbedingt. Bei stabilen Produktionsbedingungen und einer Temperatur von ca. 100 °C stabilisieren sich auch die Fluideigenschaften. Bei In situ Bedingungen übertage beträgt die Dichte ρ = 1,1325 ± 0,0002 g ∙ mL⁻¹, das Redoxpotential Eh = -105,5 ± 1,3 mV und der pH = 6,61 ± 0,002. Die relative Zusammensetzung der Gasphase bei stabilen Produktionsbedingungen zeigt dagegen eine geringe Erhöhung des Stickstoffanteils sowie des Anteils der Kohlenwasserstoffe (Ethan, Propan, usw.) und Abnahme des relativen Methananteils im Laufe des Betriebs. Die quantitative Untersuchung der sekundären mineralischen Ausfällungen im Fluid mittels sequentieller Extraktion zeigte, dass Schwermetalle als eine Hauptkomponente der Fluidfestphase größtenteils in Verbindung mit organischen Molekülen vorliegen. Experimente zum Einfluss organischer Verbindungen unterschiedlicher Substanzklassen auf eine Mobilisierung der Schwermetalle aus dem Reservoirgestein ergaben, dass die Verbindungen wie Fettsäuren und PAK (polyzyklische aromatische Kohlenwasserstoffe) die Freisetzung von Kupfer, Nickel, Chrom und Blei verhindern bzw. zu derer Immobilisierung beitragen. Im Gegensatz dazu wird die Mobilität von Zink in Anwesenheit von diesen Verbindungen erhöht. Niedermolekulare Monocarbonsäuren und stickstoffhaltige Heteroaromaten tragen, mit Ausnahme von Blei, zur Freisetzung bzw. Mobilisierung von Schwermetallen aus dem Reservoirgestein bei. Die gewonnenen Erkenntnisse dieser Arbeit bestätigen das Risiko massiver Ausfällungen auf der kalten Seite der Geothermieanlage bei Inbetriebnahme des Kraftwerks, wenn keine an den Fluidchemismus angepassten Präventionsmethoden eingesetzt werden. Die Isotopenzusammensetzung der Fluidkomponenten sowie geringfügige Schwankungen der Gaszusammensetzung im kontinuierlichen Anlagenbetrieb lässt eine Kommunikation des unterpermischen Reservoirs mit dem darunter liegenden Oberkarbon vermuten, was eine nachträgliche Veränderung der Fluidzusammensetzung beim Dauerbetrieb der Anlage bedeuten kann. N2 - This work represents a holistic study of the properties of fluid from the Lower Permian reservoirs of the geothermal research site Gross Schönebeck at reservoir and at wellhead conditions during fluid circulation. Investigations of the fluid origin show that the formation water represents a connate water of meteoric origin without any evidence of influences from overlying Zechstein. The tracers of formation water as well as the isotopic signatures of relevant components reveal a common genesis path with waters of other Rotliegend reservoirs of the Northeast German Basin (NEGB). The isotope ratios of ⁸⁷Sr/⁸⁶Sr ≈ 0,7158 and sulphate δ³⁴SV-CDT ≈ 4,1 ‰ indicate strong water rock interaction with Lower Permian Rotliegend sandstones and volcanic rocks, resulting in an enrichment with 87Sr and 34S. The fluid dissolves about gas/water ≤ 2 (at STP) of formation gas at reservoir conditions. Major components are nitrogen (δ¹⁵NAir ≈ 0,6 ‰) and methane (δ¹³CV PDB ≈ - 18 ‰) of thermogenic origin from carboniferous organic matter with kerogen Type III coals of high maturity. The noble gases represent a gas mixture of crustal origin with a residence time τ (⁴He) in the reservoir of 275 - 317 Ma. This value exceeds commonly accepted age and parent radionuclide content of the stratigraphic group. This indicates migration of gases from older sediment layers. The changes of physico-chemical fluid properties above ground during plant operation are primarily temperature-affected. At steady operating conditions with a stable temperature of ~ 100 °C fluid properties stabilise with an in-situ density ρ = 1,1325 ± 0,0002 g ∙ mL⁻¹, redox potential Eh = -105,5 ± 1,3 mV and pH = 6,61 ± 0,002. The composition of formation gas at steady operating conditions shows a slight increase of nitrogen content and lower concentrated hydrocarbons (ethane, propane, etc.). Methane content decreases during fluid production, which could be an indicator for gas migration from different reservoir sections. A quantitative examination of secondary mineral precipitations in the fluid by means of sequential extractions indicates that heavy metals are largely bonded on the organic matter. Experiments on the impact different classes of organic components on the mobilisation of heavy metals from the reservoir rock demonstrated that the most heavy metals (Cu, Pb, Cr and Ni) can hardly be mobilized by fatty acids and polycyclic aromatic hydrocarbons or can be precipitated from the fluid. Zinc showed the opposite behaviour with these organic compounds. Organic components such as monocarboxylic acids and nitrogen heterocycles contribute to removing of heavy metals from the reservoir rock, with exception of lead. The findings of this work confirm the risk of considerable precipitation on the cold side of the geothermal plant during commissioning of the power station unless prevention methods adapted for the fluid chemistry are applied. The isotopic composition of fluid components as well as a minor fluctuation of gas composition during continuous plant operation indicates a potential communication of the Lower Permian reservoir with the underlying Upper Carboniferous formation. This may lead to a subsequent change of the fluid composition during a long-term operation of the plant in GrSk. KW - Groß Schönebeck KW - Rotliegend KW - Formationsfluid KW - Schwermetalle KW - Herkunft KW - geothermal KW - origin KW - formation fluid KW - heavy metals KW - onsite monitoring Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-87402 ER - TY - JOUR A1 - Mardoukhi, Yousof A1 - Jeon, Jae-Hyung A1 - Metzler, Ralf T1 - Geometry controlled anomalous diffusion in random fractal geometries BT - looking beyond the infinite cluster JF - Physical chemistry, chemical physics : PCCP ; a journal of European Chemical Societies N2 - We investigate the ergodic properties of a random walker performing (anomalous) diffusion on a random fractal geometry. Extensive Monte Carlo simulations of the motion of tracer particles on an ensemble of realisations of percolation clusters are performed for a wide range of percolation densities. Single trajectories of the tracer motion are analysed to quantify the time averaged mean squared displacement (MSD) and to compare this with the ensemble averaged MSD of the particle motion. Other complementary physical observables associated with ergodicity are studied, as well. It turns out that the time averaged MSD of individual realisations exhibits non-vanishing fluctuations even in the limit of very long observation times as the percolation density approaches the critical value. This apparent non-ergodic behaviour concurs with the ergodic behaviour on the ensemble averaged level. We demonstrate how the non-vanishing fluctuations in single particle trajectories are analytically expressed in terms of the fractal dimension and the cluster size distribution of the random geometry, thus being of purely geometrical origin. Moreover, we reveal that the convergence scaling law to ergodicity, which is known to be inversely proportional to the observation time T for ergodic diffusion processes, follows a power-law BT� h with h o 1 due to the fractal structure of the accessible space. These results provide useful measures for differentiating the subdiffusion on random fractals from an otherwise closely related process, namely, fractional Brownian motion. Implications of our results on the analysis of single particle tracking experiments are provided. Y1 - 2015 U6 - https://doi.org/10.1039/c5cp03548a SN - 1439-7641 IS - 17 SP - 30134 EP - 30147 PB - Wiley-VCH Verl. CY - Weinheim ER - TY - GEN A1 - Mardoukhi, Yousof A1 - Jeon, Jae-Hyung A1 - Metzler, Ralf T1 - Geometry controlled anomalous diffusion in random fractal geometries BT - looking beyond the infinite cluster N2 - We investigate the ergodic properties of a random walker performing (anomalous) diffusion on a random fractal geometry. Extensive Monte Carlo simulations of the motion of tracer particles on an ensemble of realisations of percolation clusters are performed for a wide range of percolation densities. Single trajectories of the tracer motion are analysed to quantify the time averaged mean squared displacement (MSD) and to compare this with the ensemble averaged MSD of the particle motion. Other complementary physical observables associated with ergodicity are studied, as well. It turns out that the time averaged MSD of individual realisations exhibits non-vanishing fluctuations even in the limit of very long observation times as the percolation density approaches the critical value. This apparent non-ergodic behaviour concurs with the ergodic behaviour on the ensemble averaged level. We demonstrate how the non-vanishing fluctuations in single particle trajectories are analytically expressed in terms of the fractal dimension and the cluster size distribution of the random geometry, thus being of purely geometrical origin. Moreover, we reveal that the convergence scaling law to ergodicity, which is known to be inversely proportional to the observation time T for ergodic diffusion processes, follows a power-law BT� h with h o 1 due to the fractal structure of the accessible space. These results provide useful measures for differentiating the subdiffusion on random fractals from an otherwise closely related process, namely, fractional Brownian motion. Implications of our results on the analysis of single particle tracking experiments are provided. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 207 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-85247 ER - TY - JOUR A1 - Neffe, Axel T. A1 - Lendlein, Andreas T1 - Going Beyond Compromises in Multifunctionality of Biomaterials JF - Advanced healthcare materials Y1 - 2015 U6 - https://doi.org/10.1002/adhm.201400724 SN - 2192-2640 SN - 2192-2659 VL - 4 IS - 5 SP - 642 EP - 645 PB - Wiley-Blackwell CY - Hoboken ER - TY - BOOK A1 - Buddrus, Joachim A1 - Schmidt, Bernd T1 - Grundlagen der organischen Chemie Y1 - 2015 SN - 978-3-11-030559-3 PB - de Gruyter CY - Berlin ET - 5., überarb. und aktualisierte Aufl. ER - TY - THES A1 - Primus, Philipp-Alexander T1 - High resolution spectroscopy as a tool to unravel structure-reactivity relationships in Eu3+ doped ceria/ceria-zirconia based catalyst nanomaterials Y1 - 2015 ER - TY - JOUR A1 - Megow, Jörg T1 - How Van der Waals Interactions Influence the Absorption Spectra of Pheophorbide a Complexes: A Mixed Quantum-Classical Study JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The computation of dispersive site energy shifts due to van der Waals interaction (London dispersion forces) was combined with mixed quantum-classical methodology to calculate the linear optical absorption spectra of large pheophorbide a (Pheo) dendrimers. The computed spectra agreed very well with the measurements considering three characteristic optical features occurring with increasing aggregate size: a strong line broadening, a redshift, and a low-energy shoulder. The improved mixed quantum-classical methodology is considered a powerful tool in investigating molecular aggregates. KW - dispersion KW - electrostatic interactions KW - mixed quantum-classical methodology KW - optical spectra KW - supramolecular chemistry Y1 - 2015 U6 - https://doi.org/10.1002/cphc.201500326 SN - 1439-4235 SN - 1439-7641 VL - 16 IS - 14 SP - 3101 EP - 3107 PB - Wiley-VCH CY - Weinheim ER - TY - INPR A1 - Leroux, Fabrice A1 - Rabu, Pierre A1 - Sommerdijk, Nico A. J. M. A1 - Taubert, Andreas T1 - Hybrid Materials Engineering in Biology, Chemistry, and Physics T2 - European journal of inorganic chemistry : a journal of ChemPubSoc Europe N2 - The Guest Editors emphasize the rapidly growing research in advanced materials.Telecommunication, health and environment, energy and transportation, and sustainability are just a few examples where new materials have been key for technological advancement. Y1 - 2015 U6 - https://doi.org/10.1002/ejic.201500098 SN - 1434-1948 SN - 1099-0682 IS - 7 SP - 1086 EP - 1088 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Niedl, Robert Raimund A1 - Beta, Carsten T1 - Hydrogel-driven paper-based microfluidics N2 - Paper-based microfluidics provide an inexpensive, easy to use technology for point-of-care diagnostics in developing countries. Here, we combine paper-based microfluidic devices with responsive hydrogels to add an entire new class of functions to these versatile low-cost fluidic systems. The hydrogels serve as fluid reservoirs. In response to an external stimulus, e.g. an increase in temperature, the hydrogels collapse and release fluid into the structured paper substrate. In this way, chemicals that are either stored on the paper substrate or inside the hydrogel pads can be dissolved, premixed, and brought to reaction to fulfill specific analytic tasks. We demonstrate that multi-step sequences of chemical reactions can be implemented in a paper-based system and operated without the need for external precision pumps. We exemplify this technology by integrating an antibody-based E. coli test on a small and easy to use paper device. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 193 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81083 SP - 2452 EP - 2459 ER - TY - JOUR A1 - Niedl, Robert Raimund A1 - Beta, Carsten T1 - Hydrogel-driven paper-based microfluidics JF - LAB on a chip : miniaturisation for chemistry and biology N2 - Paper-based microfluidics provide an inexpensive, easy to use technology for point-of-care diagnostics in developing countries. Here, we combine paper-based microfluidic devices with responsive hydrogels to add an entire new class of functions to these versatile low-cost fluidic systems. The hydrogels serve as fluid reservoirs. In response to an external stimulus, e.g. an increase in temperature, the hydrogels collapse and release fluid into the structured paper substrate. In this way, chemicals that are either stored on the paper substrate or inside the hydrogel pads can be dissolved, premixed, and brought to reaction to fulfill specific analytic tasks. We demonstrate that multi-step sequences of chemical reactions can be implemented in a paper-based system and operated without the need for external precision pumps. We exemplify this technology by integrating an antibody-based E. coli test on a small and easy to use paper device. Y1 - 2015 U6 - https://doi.org/10.1039/c5lc00276a SN - 1473-0197 SN - 1473-0189 VL - 11 IS - 15 SP - 2452 EP - 2459 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Guiet, Amandine A1 - Goebel, Caren A1 - Klingan, Katharina A1 - Lublow, Michael A1 - Reier, Tobias A1 - Vainio, Ulla A1 - Kraehnert, Ralph A1 - Schlaad, Helmut A1 - Strasser, Peter A1 - Zaharieva, Ivelina A1 - Dau, Holger A1 - Driess, Matthias A1 - Polte, Joerg A1 - Fischer, Anna T1 - Hydrophobic Nanoreactor Soft-Templating: A Supramolecular Approach to Yolk@Shell Materials JF - Advanced functional materials N2 - Due to their unique morphology-related properties, yolk@shell materials are promising materials for catalysis, drug delivery, energy conversion, and storage. Despite their proven potential, large-scale applications are however limited due to demanding synthesis protocols. Overcoming these limitations, a simple soft-templated approach for the one-pot synthesis of yolk@shell nanocomposites and in particular of multicore metal nanoparticle@metal oxide nanostructures (M-NP@MOx) is introduced. The approach here, as demonstrated for Au-NP@ITOTR (ITOTR standing for tin-rich ITO), relies on polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) inverse micelles as two compartment nanoreactor templates. While the hydrophilic P4VP core incorporates the hydrophilic metal precursor, the hydrophobic PS corona takes up the hydrophobic metal oxide precursor. As a result, interfacial reactions between the precursors can take place, leading to the formation of yolk@shell structures in solution. Once calcined these micelles yield Au-NP@ITOTR nanostructures, composed of multiple 6 nm sized Au NPs strongly anchored onto the inner surface of porous 35 nm sized ITOTR hollow spheres. Although of multicore nature, only limited sintering of the metal nanoparticles is observed at high temperatures (700 degrees C). In addition, the as-synthesized yolk@shell structures exhibit high and stable activity toward CO electrooxidation, thus demonstrating the applicability of our approach for the design of functional yolk@shell nanocatalysts. KW - inverse micelles KW - nanoreactor KW - polystyrene-block-poly(4-vinylpyridine) KW - soft-templating KW - tin-rich ITO KW - yolk@shell materials Y1 - 2015 U6 - https://doi.org/10.1002/adfm.201502388 SN - 1616-301X SN - 1616-3028 VL - 25 IS - 39 SP - 6228 EP - 6240 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Mirskova, Anna N. A1 - Adamovich, Sergey N. A1 - Mirskov, Rudolf G. A1 - Kolesnikova, Olga P. A1 - Schilde, Uwe T1 - Immunoactive ionic liquids based on 2-hydroxyethylamines and 1-R-indol-3-ylsulfanylacetic acids. Crystal and molecular structure of immunodepressant tris-(2-hydroxyethyl)ammonium indol-3-ylsulfanylacetate JF - Open chemistry : formerly Central European journal of chemistry N2 - Immunoactive ionic liquids (2-hydroxyethyl) ammonium 1-R-indol-3-ylsulfanyl-acetates HN+R1R2(CH2CH2OH)center dot O-(O)CCH2S-Ind-R-3-1(1-5), were synthesized by the reaction of (2-hydroxyethyl)amines with indol-3-ylsulfanylacetic- or 1-benzylindol-3-ylsulfanylacetic acid. 1: R-1 = R-2 = CH2CH2OH, R-3 = H; 2: R-1 =CH3, R-2=CH2CH2OH, R3 = H; 3: R-1 = R-2 = CH3, R-3 = H; 4: R-1 = R-2 = CH2CH2OH, R-3 = CH2C6H5; 5: R-1 = CH3; R-2 = CH2CH2OH; R-3 = CH2C6H5. The structure of each compound was elucidated by IR, NMR H-1, C-13, and N-15 techniques and their composition was confirmed by elemental analysis. The crystal structure of tris-(2-hydroxyethyl) ammonium indol-3-ylsulfanylacetate was investigated by X-ray diffraction analysis. Immunoactive properties of the title compounds were screened. KW - Protic 2-hydroxyethylammonium ionic liquids KW - 2-Hydroxyethylammonium 1-R-indol-3-ylsulfanylacetates KW - Crystal and molecular structure KW - Immunoactive properties Y1 - 2015 U6 - https://doi.org/10.1515/chem-2015-0018 SN - 2391-5420 VL - 13 IS - 1 SP - 149 EP - 155 PB - De Gruyter Open CY - Warsaw ER - TY - JOUR A1 - Mondal, Suvendu Sekhar A1 - Thomas, Arne A1 - Holdt, Hans-Jürgen T1 - In situ synthesis of amide-imidate-imidazolate ligand and formation of metal-organic frameworks: Application for gas storage JF - Microporous and mesoporous materials : zeolites, clays, carbons and related materials N2 - In this review article, we highlight the synthesis, structures and gas-sorption properties of a series of nine isostructural IFPs (IFP = Imidazolate Framework Potsdam) and two H-bonded networks. IFPs were synthesized by in situ partial hydrolysis of a 4,5-dicyanoimidazole under solvothermal conditions and hence an imidazolate-4-amide-5-imidate linker (C5H3N4O2) was generated, forming the metal -amide-imidate-imidazolateframeworks [M(C5H3N4O2)-R]. Varying R in the 2-substitued linker (R = Me, Cl, Br, Et, OMe and OEt) and metal centre (M2+ = zinc and cobalt) allowed the variation in channel diameter (4.2-03 angstrom) and a fine-tuning of the polarity and functionality of the channel walls of IFPs. Furthermore, we show that using ethyl or alkoxy substituted IFPs the flexible groups act as molecular gates for guest molecules. This allows highly selective CO2 sorption over Ny and CH4 gases. Moreover, during the synthesis of methoxy substituted IFPs (IFP-7 and -8), an imidazolate-4,5-diamide-2-olate linker (C5H4N4O3) formed in situ leads to the formation of a molecular building block (MBB) with a M-6 octahedron inscribed in a M-8 cube (M Zn2+ and Co2+). The MBBs connect by amide amide hydrogen bonds to a 3D robust supramolecular networks [Zn-14(C5H4N4O3)(12)(O) (OH)(2) (DMF)(4) denoted as 1 and 2, respectively, DMF = N,N'-dimethylformamide], which can be activated for N-2, CO2, CH4, and H-2 gas-sorption. (C) 2015 Elsevier Inc. All rights reserved. KW - Flexible linker KW - Gas sorption KW - Gate-effects KW - Hydrogen-bonding KW - Solvothermal synthesis Y1 - 2015 U6 - https://doi.org/10.1016/j.micromeso.2015.01.049 SN - 1387-1811 SN - 1873-3093 VL - 216 SP - 2 EP - 12 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Meyer, S. A1 - Raber, G. A1 - Ebert, Franziska A1 - Leffers, L. A1 - Müller, Sandra Marie A1 - Taleshi, M. S. A1 - Francesconi, Kevin A. A1 - Schwerdtle, Tanja T1 - In vitro toxicological characterisation of arsenic-containing fatty acids and three of their metabolites JF - Toxicology research N2 - Arsenic-containing fatty acids are a group of fat-soluble arsenic species (arsenolipids) which are present in marine fish and other seafood. Recently, it has been shown that arsenic-containing hydrocarbons, another group of arsenolipids, exert toxicity in similar concentrations comparable to arsenite although the toxic modes of action differ. Hence, a risk assessment of arsenolipids is urgently needed. In this study the cellular toxicity of a saturated (AsFA 362) and an unsaturated (AsFA 388) arsenic-containing fatty acid and three of their proposed metabolites (DMAV, DMAPr and thio-DMAPr) were investigated in human liver cells (HepG2). Even though both arsenic-containing fatty acids were less toxic as compared to arsenic-containing hydrocarbons and arsenite, significant effects were observable at μM concentrations. DMAV causes effects in a similar concentration range and it could be seen that it is metabolised to its highly toxic thio analogue thio-DMAV in HepG2 cells. Nevertheless, DMAPr and thio-DMAPr did not exert any cytotoxicity. In summary, our data indicate that risks to human health related to the presence of arsenic-containing fatty acids in marine food cannot be excluded. This stresses the need for a full in vitro and in vivo toxicological characterisation of these arsenolipids. Y1 - 2015 U6 - https://doi.org/10.1039/c5tx00122f SN - 2045-4538 VL - 5 IS - 4 SP - 1289 EP - 1296 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Meyer, S. A1 - Raber, G. A1 - Ebert, Franziska A1 - Leffers, L. A1 - Müller, Sandra Marie A1 - Taleshi, M. S. A1 - Francesconi, Kevin A. A1 - Schwerdtle, Tanja T1 - In vitro toxicological characterisation of arsenic-containing fatty acids and three of their metabolites N2 - Arsenic-containing fatty acids are a group of fat-soluble arsenic species (arsenolipids) which are present in marine fish and other seafood. Recently, it has been shown that arsenic-containing hydrocarbons, another group of arsenolipids, exert toxicity in similar concentrations comparable to arsenite although the toxic modes of action differ. Hence, a risk assessment of arsenolipids is urgently needed. In this study the cellular toxicity of a saturated (AsFA 362) and an unsaturated (AsFA 388) arsenic-containing fatty acid and three of their proposed metabolites (DMAV, DMAPr and thio-DMAPr) were investigated in human liver cells (HepG2). Even though both arsenic-containing fatty acids were less toxic as compared to arsenic-containing hydrocarbons and arsenite, significant effects were observable at μM concentrations. DMAV causes effects in a similar concentration range and it could be seen that it is metabolised to its highly toxic thio analogue thio-DMAV in HepG2 cells. Nevertheless, DMAPr and thio-DMAPr did not exert any cytotoxicity. In summary, our data indicate that risks to human health related to the presence of arsenic-containing fatty acids in marine food cannot be excluded. This stresses the need for a full in vitro and in vivo toxicological characterisation of these arsenolipids. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 199 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82008 ER - TY - JOUR A1 - Yan, Wan A1 - Fang, Liang A1 - Nöchel, Ulrich A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Influence of deformation temperature on structural variation and shape-memory effect of a thermoplastic semi-crystalline multiblock copolymer JF - eXPRESS polymer letters N2 - A multiblock copolymer termed as PCL-PIBMD, consisting of crystallizable poly(epsilon-caprolactone) (PCL) segments and crystallizable poly(3S-isobutyl-morpholine-2,5-dione) (PIBMD) segments, has been reported as a material showing a thermally-induced shape-memory effect. While PIBMD crystalline domains act as netpoints to determine the permanent shape, both PCL crystalline domains and PIBMD amorphous domains, which have similar transition temperatures (T-trans) can act as switching domains. In this work, the influence of the deformation temperature (T-deform = 50 or 20 degrees C), which was above or below T-trans, on the structural changes of PCL-PIBMD during uniaxial deformation and the shapememory properties were investigated. Furthermore, the relative contribution of crystalline PCL and PIBMD amorphous phases to the fixation of the temporary shape were distinguished by a toluene vapor treatment approach. The results indicated that at 50 degrees C, both PCL and PIBMD amorphous phases can be orientated during deformation, resulting in thermally-induced crystals of PCL domains and joint contribution to the switching domains. In contrast at 20 degrees C, the temporary shape was mainly fixed by PCL crystals generated via strain-induced crystallization. KW - biodegradable polymers KW - shape-memory polymer KW - multiblock copolymer KW - polydepsipeptide Y1 - 2015 U6 - https://doi.org/10.3144/expresspolymlett.2015.58 SN - 1788-618X VL - 9 IS - 7 SP - 624 EP - 635 PB - Budapest University of Technology and Economics, Department of Polymer Engineering CY - Budapest ER - TY - JOUR A1 - Schöne, Anne-Christin A1 - Richau, Klaus A1 - Kratz, Karl A1 - Schulz, Burkhard A1 - Lendlein, Andreas T1 - Influence of Diurethane Linkers on the Langmuir Layer Behavior of Oligo[(rac-lactide)-co-glycolide]-based Polyesterurethanes JF - Macromolecular rapid communications N2 - Three oligo[(rac-lactide)-co-glycolide] based polyesterurethanes (OLGA-PUs) containing different diurethane linkers are investigated by the Langmuir monolayer technique and compared to poly[(rac-lactide)-co-glycolide] (PLGA) to elucidate the influence of the diurethane junction units on hydrophilicity and packing motifs of these polymers at the air-water interface. The presence of diurethane linkers does not manifest itself in the Langmuir layer behavior both in compression and expansion experiments when monomolecular films of OLGA-PUs are spread on the water surface. However, the linker retard the evolution of morphological structures at intermediate compression level under isobaric conditions (with a surface pressure greater than 11 mN m(-1)) compared to the PLGA, independent on the chemical structure of the diurethane moiety. The layer thicknesses of both OLGA-PU and PLGA films decrease in the high compression state with decreasing surface pressure, as deduced from ellipsometric data. All films must be described with the effective medium approximation as water swollen layers. KW - Brewster angle microscopy KW - Langmuir monolayer KW - poly[(rac-lactide)-co-glycolide] KW - polyesterurethanes KW - spectroscopic ellipsometry Y1 - 2015 U6 - https://doi.org/10.1002/marc.201500316 SN - 1022-1336 SN - 1521-3927 VL - 36 IS - 21 SP - 1910 EP - 1915 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Perez-Anes, Alexandra A1 - Rodrigues, Fernanda A1 - Caminade, Anne-Marie A1 - Stefaniu, Cristina A1 - Tiersch, Brigitte A1 - Turrin, Cedric-Olivier A1 - Blanzat, Muriel T1 - Influence of structural parameters on the self-association properties of anti-HIV catanionic dendrimers JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The self-association properties of anti-HIV catanionic dendrimers as multivalent galactosylceramide (GalCer)-derived inhibitors are presented. The study was designed to elucidate the origin of the relatively high cytotoxicity values of these antiHIV catanionic dendrimers, which have previously been found to exhibit in vitro anti-HIV activity in the submicromolar range. The physicochemical properties of these catanionic dendrimers were studied to tentatively correlate the structural parameters with self-association and biological properties. We can conclude from this study that the absence of correlation between the hydrophobicity and the cytotoxicity of the catanionic systems could be explained by the partial segregation of the different partners of the catanionic entities. KW - anti-HIV KW - catanionic surfactants KW - dendrimers KW - galactosylceramide KW - glycolipids Y1 - 2015 U6 - https://doi.org/10.1002/cphc.201500484 SN - 1439-4235 SN - 1439-7641 VL - 16 IS - 16 SP - 3433 EP - 3437 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Beisebekov, Madiar Maratovich A1 - Serikpayeva, Saniya B. A1 - Zhumagalieva, Shynar Nurlanovna A1 - Beisebekov, Marat Kianovich A1 - Abilov, Zharylkasyn Abduachitovich A1 - Kosmella, Sabine A1 - Koetz, Joachim T1 - Interactions of bentonite clay in composite gels of non-ionic polymers with cationic surfactants and heavy metal ions JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - Chemically cross-linked composite gels based on bentonite clay from Manyrak deposit (Kazakhstan Republic) and nonionic polymers, i.e., poly(hydroxyethylacrylate) and poly(acrylamide), were polymerized in situ after preliminary intercalation of monomers in an aqueous suspension of bentonite clay. By means of cryo-scanning electron microscopy, it was shown that bentonite clay is well incorporated into the gel network structure with pore sizes up to 1.5 mu m. The intercalated bentonite clay can adsorb cationic surfactants as well as heavy metal ions due to electrostatic interactions. Conductometric and surface tension measurements indicate not only the adsorption of surfactants and heavy metals inside the hydrogel, but also the displacement of the critical micellization concentration (CMC) of the surfactants. KW - Bentonite clay KW - Cationic surfactants KW - Heavy metal ions KW - Composite hydrogels Y1 - 2015 U6 - https://doi.org/10.1007/s00396-014-3463-x SN - 0303-402X SN - 1435-1536 VL - 293 IS - 2 SP - 633 EP - 639 PB - Springer CY - New York ER - TY - JOUR A1 - Hentrich, Doreen A1 - Junginger, Mathias A1 - Bruns, Michael A1 - Börner, Hans Gerhard A1 - Brandt, Jessica A1 - Brezesinski, Gerald A1 - Taubert, Andreas T1 - Interface-controlled calcium phosphate mineralization BT - effect of oligo(aspartic acid)-rich interfaces JF - CrystEngComm N2 - The phase behavior of an amphiphilic block copolymer based on a poly(aspartic acid) hydrophilic block and a poly(n-butyl acrylate) hydrophobic block was investigated at the air–water and air–buffer interface. The polymer forms stable monomolecular films on both subphases. At low pH, the isotherms exhibit a plateau. Compression–expansion experiments and infrared reflection absorption spectroscopy suggest that the plateau is likely due to the formation of polymer bi- or multilayers. At high pH the films remain intact upon compression and no multilayer formation is observed. Furthermore, the mineralization of calcium phosphate beneath the monolayer was studied at different pH. The pH of the subphase and thus the polymer charge strongly affects the phase behavior of the film and the mineral formation. After 4 h of mineralization at low pH, atomic force microscopy shows smooth mineral films with a low roughness. With increasing pH the mineral films become inhomogeneous and the roughness increases. Transmission electron microscopy confirms this: at low pH a few small but uniform particles form whereas particles grown at higher pH are larger and highly agglomerated. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirm the formation of calcium phosphate. The levels of mineralization are higher in samples grown at high pH. Y1 - 2015 U6 - https://doi.org/10.1039/C4CE02274B SN - 1466-8033 IS - 17 SP - 6901 EP - 6913 PB - Royal Society of Chemistry CY - London ER - TY - GEN A1 - Hentrich, Doreen A1 - Junginger, Mathias A1 - Bruns, Michael A1 - Börner, Hans Gerhard A1 - Brandt, Jessica A1 - Brezesinski, Gerald A1 - Taubert, Andreas T1 - Interface-controlled calcium phosphate mineralization BT - effect of oligo(aspartic acid)-rich interfaces N2 - The phase behavior of an amphiphilic block copolymer based on a poly(aspartic acid) hydrophilic block and a poly(n-butyl acrylate) hydrophobic block was investigated at the air–water and air–buffer interface. The polymer forms stable monomolecular films on both subphases. At low pH, the isotherms exhibit a plateau. Compression–expansion experiments and infrared reflection absorption spectroscopy suggest that the plateau is likely due to the formation of polymer bi- or multilayers. At high pH the films remain intact upon compression and no multilayer formation is observed. Furthermore, the mineralization of calcium phosphate beneath the monolayer was studied at different pH. The pH of the subphase and thus the polymer charge strongly affects the phase behavior of the film and the mineral formation. After 4 h of mineralization at low pH, atomic force microscopy shows smooth mineral films with a low roughness. With increasing pH the mineral films become inhomogeneous and the roughness increases. Transmission electron microscopy confirms this: at low pH a few small but uniform particles form whereas particles grown at higher pH are larger and highly agglomerated. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirm the formation of calcium phosphate. The levels of mineralization are higher in samples grown at high pH. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 213 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89540 SP - 6901 EP - 6913 ER - TY - JOUR A1 - Hentrich, Doreen A1 - Junginger, Mathias A1 - Bruns, Michael A1 - Boerner, Hans G. A1 - Brandt, Jessica A1 - Brezesinski, Gerald A1 - Taubert, Andreas T1 - Interface-controlled calcium phosphate mineralization: effect of oligo(aspartic acid)-rich interfaces JF - CrystEngComm N2 - The phase behavior of an amphiphilic block copolymer based on a poly(aspartic acid) hydrophilic block and a poly(n-butyl acrylate) hydrophobic block was investigated at the air-water and air-buffer interface. The polymer forms stable monomolecular films on both subphases. At low pH, the isotherms exhibit a plateau. Compression-expansion experiments and infrared reflection absorption spectroscopy suggest that the plateau is likely due to the formation of polymer bi- or multilayers. At high pH the films remain intact upon compression and no multilayer formation is observed. Furthermore, the mineralization of calcium phosphate beneath the monolayer was studied at different pH. The pH of the subphase and thus the polymer charge strongly affects the phase behavior of the film and the mineral formation. After 4 h of mineralization at low pH, atomic force microscopy shows smooth mineral films with a low roughness. With increasing pH the mineral films become inhomogeneous and the roughness increases. Transmission electron microscopy confirms this: at low pH a few small but uniform particles form whereas particles grown at higher pH are larger and highly agglomerated. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirm the formation of calcium phosphate. The levels of mineralization are higher in samples grown at high pH. Y1 - 2015 U6 - https://doi.org/10.1039/c4ce02274b SN - 1466-8033 VL - 17 IS - 36 SP - 6901 EP - 6913 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Klaper, Matthias A1 - Linker, Torsten T1 - Intramolecular Transfer of Singlet Oxygen JF - Journal of the American Chemical Society N2 - The intramolecular transfer of energy (FRET) and electrons (Dexter) are of great interest for the scientific community and are well-understood. In contrast, the intramolecular transfer of singlet oxygen (O-1(2)), a reactive and short-lived oxygen species, has until now been unknown. This process would be very interesting because O-1(2) plays an important role in photodynamic therapy (PDT). Herein, we present the first successful intramolecular transfer of O-1(2) from a donor to acceptor. Also, we found a dependence of conformation and temperature comparable with those of FRET. We provide several pieces of evidence for the intramolecular character of this transfer, including competition experiments. Our studies should be interesting not only from the theoretical and mechanistic point of view but also for the design of new O-1(2) donors and applications in PDT. Y1 - 2015 U6 - https://doi.org/10.1021/jacs.5b07848 SN - 0002-7863 VL - 137 IS - 43 SP - 13744 EP - 13747 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Madaan, Nitesh A1 - Romriell, Naomi A1 - Tuscano, Joshua A1 - Schlaad, Helmut A1 - Linford, Matthew R. T1 - Introduction of thiol moieties, including their thiol-ene reactions and air oxidation, onto polyelectrolyte multilayer substrates JF - Journal of colloid and interface science KW - Thiol-ene KW - Layer-by-layer KW - XPS KW - ToF-SIMS KW - Hydrophobic KW - AFM KW - Ellipsometry Y1 - 2015 U6 - https://doi.org/10.1016/j.jcis.2015.08.017 SN - 0021-9797 SN - 1095-7103 VL - 459 SP - 199 EP - 205 PB - Elsevier CY - San Diego ER - TY - GEN A1 - de Carvalho, Sidney J. A1 - Metzler, Ralf A1 - Cherstvy, Andrey G. T1 - Inverted critical adsorption of polyelectrolytes in confinement N2 - What are the fundamental laws for the adsorption of charged polymers onto oppositely charged surfaces, for convex, planar, and concave geometries? This question is at the heart of surface coating applications, various complex formation phenomena, as well as in the context of cellular and viral biophysics. It has been a long-standing challenge in theoretical polymer physics; for realistic systems the quantitative understanding is however often achievable only by computer simulations. In this study, we present the findings of such extensive Monte-Carlo in silico experiments for polymer–surface adsorption in confined domains. We study the inverted critical adsorption of finite-length polyelectrolytes in three fundamental geometries: planar slit, cylindrical pore, and spherical cavity. The scaling relations extracted from simulations for the critical surface charge density sc—defining the adsorption–desorption transition—are in excellent agreement with our analytical calculations based on the ground-state analysis of the Edwards equation. In particular, we confirm the magnitude and scaling of sc for the concave interfaces versus the Debye screening length 1/k and the extent of confinement a for these three interfaces for small ka values. For large ka the critical adsorption condition approaches the known planar limit. The transition between the two regimes takes place when the radius of surface curvature or half of the slit thickness a is of the order of 1/k. We also rationalize how sc(k) dependence gets modified for semi-flexible versus flexible chains under external confinement. We examine the implications of the chain length for critical adsorption—the effect often hard to tackle theoretically—putting an emphasis on polymers inside attractive spherical cavities. The applications of our findings to some biological systems are discussed, for instance the adsorption of nucleic acids onto the inner surfaces of cylindrical and spherical viral capsids. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 214 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89562 SP - 4430 EP - 4443 ER - TY - JOUR A1 - de Carvalho, Sidney J. A1 - Metzler, Ralf A1 - Cherstvy, Andrey G. T1 - Inverted critical adsorption of polyelectrolytes in confinement JF - Soft matter N2 - What are the fundamental laws for the adsorption of charged polymers onto oppositely charged surfaces, for convex, planar, and concave geometries? This question is at the heart of surface coating applications, various complex formation phenomena, as well as in the context of cellular and viral biophysics. It has been a long-standing challenge in theoretical polymer physics; for realistic systems the quantitative understanding is however often achievable only by computer simulations. In this study, we present the findings of such extensive Monte-Carlo in silico experiments for polymer–surface adsorption in confined domains. We study the inverted critical adsorption of finite-length polyelectrolytes in three fundamental geometries: planar slit, cylindrical pore, and spherical cavity. The scaling relations extracted from simulations for the critical surface charge density sc—defining the adsorption–desorption transition—are in excellent agreement with our analytical calculations based on the ground-state analysis of the Edwards equation. In particular, we confirm the magnitude and scaling of sc for the concave interfaces versus the Debye screening length 1/k and the extent of confinement a for these three interfaces for small ka values. For large ka the critical adsorption condition approaches the known planar limit. The transition between the two regimes takes place when the radius of surface curvature or half of the slit thickness a is of the order of 1/k. We also rationalize how sc(k) dependence gets modified for semi-flexible versus flexible chains under external confinement. We examine the implications of the chain length for critical adsorption—the effect often hard to tackle theoretically—putting an emphasis on polymers inside attractive spherical cavities. The applications of our findings to some biological systems are discussed, for instance the adsorption of nucleic acids onto the inner surfaces of cylindrical and spherical viral capsids. Y1 - 2015 U6 - https://doi.org/10.1039/C5SM00635J SN - 1744-6848 SN - 1744-683X IS - 11 SP - 4430 EP - 4443 PB - Royal Society of Chemistry CY - London ER - TY - JOUR A1 - Olejko, Lydia A1 - Cywinski, Piotr J. A1 - Bald, Ilko T1 - Ion-Selective formation of a guanine quadruplex on DNA origami structures JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - DNA origami nanostructures are a versatile tool that can be used to arrange functionalities with high local control to study molecular processes at a single-molecule level. Here, we demonstrate that DNA origami substrates can be used to suppress the formation of specific guanine (G) quadruplex structures from telomeric DNA. The folding of telomeres into G-quadruplex structures in the presence of monovalent cations (e.g. Na+ and K+) is currently used for the detection of K+ ions, however, with insufficient selectivity towards Na+. By means of FRET between two suitable dyes attached to the 3- and 5-ends of telomeric DNA we demonstrate that the formation of G-quadruplexes on DNA origami templates in the presence of sodium ions is suppressed due to steric hindrance. Hence, telomeric DNA attached to DNA origami structures represents a highly sensitive and selective detection tool for potassium ions even in the presence of high concentrations of sodium ions. KW - DNA nanotechnology KW - FRET KW - G-quadruplexes KW - nanostructures KW - self-assembly Y1 - 2015 U6 - https://doi.org/10.1002/anie.201409278 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 2 SP - 673 EP - 677 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Fettkenhauer, Christian T1 - Ionothermale Synthese funktioneller Kohlenstoffnitrid basierter Materialien T1 - Ionothermal synthesis of functional carbon nitride based materials N2 - Die Doktorarbeit behandelt die Synthese Kohlenstoffnitrid basierter Materialien in eutektischen Mischungen bivalenter Metallchloride. Der Fokus liegt dabei auf ZnCl2-, SnCl2- und CoCl2-haltigen eutektischen Mischungen, in denen die Kondensation gebräuchlicher organischer Precursoren durchgeführt wird. Im Rahmen dessen wird untersucht wie durch die Reaktionsführung in Salzschmelzen unterschiedlicher Lewis-Acidität, neben der Molekülstruktur andere charakteristische Eigenschaften, wie Morphologie, Kristallinität und spezifische Oberflächen, der Materialien kontrolliert werden können. Darüber hinaus werden die optischen Eigenschaften der Materialien erörtert und in diesem Zusammenhang die Eignung als Photokatalysatoren für den oxidativen Abbau organischer Farbstoffe und für die photokatalytische Wasserreduktion bzw. –oxidation untersucht. Zusätzlich wird gezeigt, wie im System LiCl/KCl in einem einstufigen Prozess edelmetallfreie Kohlenstoffnitrid Komposite zur photokatalytischen Wasserreduktion hergestellt werden können. N2 - The thesis deals with the synthesis of carbon nitride based materials in eutectic mixtures of bivalent metal chlorides. The focus is on ZnCl2, SnCl2 and CoCl2 containing eutectic mixtures in which the condensation reaction of classical organic precursors is carried out. In this context, it is investigated how to control molecular structure and other materials properties, like morphology, crystallinity and specific surface areas by using salt melts of different Lewis acidity. Moreover optical properties of the materials are discussed and in this connection their suitability as photocatalysts for dye degradation and photocatalytic water reduction and oxidation is investigated. Additionally it is demonstrated how to produce noble metal free carbon nitride composites in LiCl/KCl melt for photocatalytic water reduction. KW - Kohlenstoffnitride KW - ionothermal KW - Komposite KW - Photokatalyse KW - Wasserstoff KW - carbon nitride KW - ionothermal KW - composites KW - photocatalysis KW - hydrogen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-78087 ER - TY - JOUR A1 - Guha, S. A1 - Warsinke, A. A1 - Tientcheu, Ch. M. A1 - Schmalz, K. A1 - Meliani, C. A1 - Wenger, Ch. T1 - Label free sensing of creatinine using a 6 GHz CMOS near-field dielectric immunosensor JF - The analyst : the analytical journal of the Royal Society of Chemistry N2 - In this work we present a CMOS high frequency direct immunosensor operating at 6 GHz (C-band) for label free determination of creatinine. The sensor is fabricated in standard 0.13 μm SiGe:C BiCMOS process. The report also demonstrates the ability to immobilize creatinine molecules on a Si3N4 passivation layer of the standard BiCMOS/CMOS process, therefore, evading any further need of cumbersome post processing of the fabricated sensor chip. The sensor is based on capacitive detection of the amount of non-creatinine bound antibodies binding to an immobilized creatinine layer on the passivated sensor. The chip bound antibody amount in turn corresponds indirectly to the creatinine concentration used in the incubation phase. The determination of creatinine in the concentration range of 0.88–880 μM is successfully demonstrated in this work. A sensitivity of 35 MHz/10 fold increase in creatinine concentration (during incubation) at the centre frequency of 6 GHz is gained by the immunosensor. The results are compared with a standard optical measurement technique and the dynamic range and sensitivity is of the order of the established optical indication technique. The C-band immunosensor chip comprising an area of 0.3 mm2 reduces the sensing area considerably, therefore, requiring a sample volume as low as 2 μl. The small analyte sample volume and label free approach also reduce the experimental costs in addition to the low fabrication costs offered by the batch fabrication technique of CMOS/BiCMOS process. Y1 - 2015 U6 - https://doi.org/10.1039/c4an02194k SN - 0003-2654 SN - 1364-5528 VL - 9 IS - 140 SP - 3019 EP - 3027 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Guha, S. A1 - Warsinke, A. A1 - Tientcheu, Ch. M. A1 - Schmalz, K. A1 - Meliani, C. A1 - Wenger, Ch. T1 - Label free sensing of creatinine using a 6 GHz CMOS near-field dielectric immunosensor N2 - In this work we present a CMOS high frequency direct immunosensor operating at 6 GHz (C-band) for label free determination of creatinine. The sensor is fabricated in standard 0.13 μm SiGe:C BiCMOS process. The report also demonstrates the ability to immobilize creatinine molecules on a Si3N4 passivation layer of the standard BiCMOS/CMOS process, therefore, evading any further need of cumbersome post processing of the fabricated sensor chip. The sensor is based on capacitive detection of the amount of non-creatinine bound antibodies binding to an immobilized creatinine layer on the passivated sensor. The chip bound antibody amount in turn corresponds indirectly to the creatinine concentration used in the incubation phase. The determination of creatinine in the concentration range of 0.88–880 μM is successfully demonstrated in this work. A sensitivity of 35 MHz/10 fold increase in creatinine concentration (during incubation) at the centre frequency of 6 GHz is gained by the immunosensor. The results are compared with a standard optical measurement technique and the dynamic range and sensitivity is of the order of the established optical indication technique. The C-band immunosensor chip comprising an area of 0.3 mm2 reduces the sensing area considerably, therefore, requiring a sample volume as low as 2 μl. The small analyte sample volume and label free approach also reduce the experimental costs in addition to the low fabrication costs offered by the batch fabrication technique of CMOS/BiCMOS process. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 195 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81177 ER - TY - JOUR A1 - Kröner, Dominik T1 - Laser-driven electron dynamics for circular dichroism in mass spectrometry BT - from one-photon excitations to multiphoton ionization JF - Physical chemistry, chemical physics : PCCP ; a journal of European Chemical Societies N2 - The distinction of enantiomers is a key aspect of chemical analysis. In mass spectrometry the distinction of enantiomers has been achieved by ionizing the sample with circularly polarized laser pulses and comparing the ion yields for light of opposite handedness. While resonant excitation conditions are expected to be most efficient, they are not required for the detection of a circular dichroism (CD) in the ion yield. However, the prediction of the size and sign of the circular dichroism becomes challenging if non-resonant multiphoton excitations are used to ionize the sample. Employing femtosecond laser pulses to drive electron wavepacket dynamics based on ab initio calculations, we attempt to reveal underlying mechanisms that determine the CD under non-resonant excitation conditions. Simulations were done for (R)-1,2-propylene oxide, using time-dependent configuration interaction singles with perturbative doubles (TD-CIS(D)) and the aug-cc-pVTZ basis set. Interactions between the electric field and the electric dipole and quadrupole as well as between the magnetic field and the magnetic dipole were explicitly accounted for. The ion yield was determined by treating states above the ionization potential as either stationary or non-stationary with energy-dependent lifetimes based on an approved heuristic approach. The observed population dynamics do not allow for a simple interpretation, because of highly non-linear interactions. Still, the various transition pathways are governed by resonant enantiospecific n-photon excitation, with preferably high transition dipole moments, which eventually dominate the CD in the ionized population. Y1 - 2015 U6 - https://doi.org/10.1039/C5CP02193F SN - 1463-9076 SN - 1463-9084 VL - 29 IS - 17 SP - 19643 EP - 19655 PB - The Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Kröner, Dominik T1 - Laser-driven electron dynamics for circular dichroism in mass spectrometry BT - from one-photon excitations to multiphoton ionization N2 - The distinction of enantiomers is a key aspect of chemical analysis. In mass spectrometry the distinction of enantiomers has been achieved by ionizing the sample with circularly polarized laser pulses and comparing the ion yields for light of opposite handedness. While resonant excitation conditions are expected to be most efficient, they are not required for the detection of a circular dichroism (CD) in the ion yield. However, the prediction of the size and sign of the circular dichroism becomes challenging if non-resonant multiphoton excitations are used to ionize the sample. Employing femtosecond laser pulses to drive electron wavepacket dynamics based on ab initio calculations, we attempt to reveal underlying mechanisms that determine the CD under non-resonant excitation conditions. Simulations were done for (R)-1,2-propylene oxide, using time-dependent configuration interaction singles with perturbative doubles (TD-CIS(D)) and the aug-cc-pVTZ basis set. Interactions between the electric field and the electric dipole and quadrupole as well as between the magnetic field and the magnetic dipole were explicitly accounted for. The ion yield was determined by treating states above the ionization potential as either stationary or non-stationary with energy-dependent lifetimes based on an approved heuristic approach. The observed population dynamics do not allow for a simple interpretation, because of highly non-linear interactions. Still, the various transition pathways are governed by resonant enantiospecific n-photon excitation, with preferably high transition dipole moments, which eventually dominate the CD in the ionized population. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 201 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82109 ER - TY - JOUR A1 - Kroener, Dominik T1 - Laser-driven electron dynamics for circular dichroism in mass spectrometry: from onephoton excitations to multiphoton ionization JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - The distinction of enantiomers is a key aspect of chemical analysis. In mass spectrometry the distinction of enantiomers has been achieved by ionizing the sample with circularly polarized laser pulses and comparing the ion yields for light of opposite handedness. While resonant excitation conditions are expected to be most efficient, they are not required for the detection of a circular dichroism (CD) in the ion yield. However, the prediction of the size and sign of the circular dichroism becomes challenging if non-resonant multiphoton excitations are used to ionize the sample. Employing femtosecond laser pulses to drive electron wavepacket dynamics based on ab initio calculations, we attempt to reveal underlying mechanisms that determine the CD under non-resonant excitation conditions. Simulations were done for (R)-1,2-propylene oxide, using time-dependent configuration interaction singles with perturbative doubles (TD-CIS(D)) and the aug-cc-pVTZ basis set. Interactions between the electric field and the electric dipole and quadrupole as well as between the magnetic field and the magnetic dipole were explicitly accounted for. The ion yield was determined by treating states above the ionization potential as either stationary or non-stationary with energy-dependent lifetimes based on an approved heuristic approach. The observed population dynamics do not allow for a simple interpretation, because of highly non-linear interactions. Still, the various transition pathways are governed by resonant enantiospecific n-photon excitation, with preferably high transition dipole moments, which eventually dominate the CD in the ionized population. Y1 - 2015 U6 - https://doi.org/10.1039/c5cp02193f SN - 1463-9076 SN - 1463-9084 VL - 17 IS - 29 SP - 19643 EP - 19655 PB - Royal Society of Chemistry CY - Cambridge ER -