TY - THES A1 - Savatieiev, Oleksandr T1 - Carbon nitride semiconductors: properties and application as photocatalysts in organic synthesis N2 - Graphitic carbon nitrides (g-CNs) are represented by melon-type g-CN, poly(heptazine imides) (PHIs), triazine-based g-CN and poly(triazine imide) with intercalated LiCl (PTI/Li+Cl‒). These materials are composed of sp2-hybridized carbon and nitrogen atoms; C:N ratio is close to 3:4; the building unit is 1,3,5-triazine or tri-s-triazine; the building units are interconnected covalently via sp2-hybridized nitrogen atoms or NH-moieties; the layers are assembled into a stack via weak van der Waals forces as in graphite. Due to medium band gap (~2.7 eV) g-CNs, such as melon-type g-CN and PHIs, are excited by photons with wavelength ≤ 460 nm. Since 2009 g-CNs have been actively studied as photocatalysts in evolution of hydrogen and oxygen – two half-reactions of full water splitting, by employing corresponding sacrificial agents. At the same time application of g-CNs as photocatalysts in organic synthesis has been remaining limited to few reactions only. Cumulative Habilitation summarizes research work conducted by the group ‘Innovative Heterogeneous Photocatalysis’ between 2017-2023 in the field of carbon nitride organic photocatalysis, which is led by Dr. Oleksandr Savatieiev. g-CN photocatalysts activate molecules, i.e. generate their more reactive open-shell intermediates, via three modes: i) Photoinduced electron transfer (PET); ii) Excited state proton-coupled electron transfer (ES-PCET) or direct hydrogen atom transfer (dHAT); iii) Energy transfer (EnT). The scope of reactions that proceed via oxidative PET, i.e. one-electron oxidation of a substrate to the corresponding radical cation, are represented by synthesis of sulfonylchlorides from S-acetylthiophenols. The scope of reactions that proceed via reductive PET, i.e. one-electron reduction of a substrate to the corresponding radical anion, are represented by synthesis of γ,γ-dichloroketones from the enones and chloroform. Due to abundance of sp2-hybridized nitrogen atoms in the structure of g-CN materials, they are able to cleave X-H bonds in organic molecules and store temporary hydrogen atom. ES-PCET or dHAT mode of organic molecules activation to the corresponding radicals is implemented for substrates featuring relatively acidic X-H bonds and those that are characterized by low bond dissociation energy, such as C-H bond next to the heteroelements. On the other hand, reductively quenched g-CN carrying hydrogen atom reduces a carbonyl compound to the ketyl radical via PCET that is thermodynamically more favorable pathway compared to the electron transfer. The scope of these reactions is represented by cyclodimerization of α,β-unsaturated ketones to cyclopentanoles. g-CN excited state demonstrates complex dynamics with the initial formation of singlet excited state, which upon intersystem crossing produces triplet excited state that is characterized by the lifetime > 2 μs. Due to long lifetime, g-CN activate organic molecules via EnT. For example, g-CN sensitizes singlet oxygen, which is the key intermediate in the dehydrogenation of aldoximes to nitrileoxides. The transient nitrileoxide undergoes [3+2]-cycloaddition to nitriles and gives oxadiazoles-1,2,4. PET, ES-PCET and EnT are fundamental phenomena that are applied beyond organic photocatalysis. Hybrid composite is formed by combining conductive polymers, such as poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) with potassium poly(heptazine imide) (K-PHI). Upon PET, K-PHI modulated population of polarons and therefore conductivity of PEDOT:PSS. The initial state of PEDOT:PSS is recovered upon material exposure to O2. K-PHI:PEDOT:PSS may be applied in O2 sensing. In the presence of electron donors, such as tertiary amines and alcohols, and irradiation with light, K-PHI undergoes photocharging – the g-CN material accumulates electrons and charge-compensating cations. Such photocharged state is stable under anaerobic conditions for weeks, but at the same time it is a strong reductant. This feature allows decoupling in time light harvesting and energy storage in the form of electron-proton couples from utilization in organic synthesis. The photocharged state of K-PHI reduces nitrobenzene to aniline, and enables dimerization of α,β-unsaturated ketones to hexadienones in dark. N2 - Graphitische Kohlenstoffnitride (g-CNs) werden durch g-CN vom Melonen-Typ, Poly(heptazinimide) (PHIs), g-CN auf Triazinbasis und Poly(triazinimid) mit interkaliertem LiCl (PTI/Li+Cl-) repräsentiert. Diese Materialien bestehen aus sp2-hybridisierten Kohlenstoff- und Stickstoffatomen; das C:N-Verhältnis liegt nahe bei 3:4; das Grundgerüst ist 1,3,5-Triazin oder Tri-s-Triazin; die Grundgerüste sind kovalent über sp2-hybridisierte Stickstoffatome oder NH-Moleküle miteinander verbunden; die Schichten werden über schwache van-der-Waals-Kräfte wie in Graphit zu einem Stapel zusammengefügt. Aufgrund der mittleren Bandlücke (~2,7 eV) werden g-CNs, wie z. B. g-CN vom Melonen-Typ und PHIs, durch Photonen mit einer Wellenlänge ≤ 460 nm angeregt. Seit 2009 werden g-CNs aktiv als Photokatalysatoren für die Entwicklung von Wasserstoff und Sauerstoff - zwei Halbreaktionen der vollständigen Wasserspaltung - untersucht, indem entsprechende Opferstoffe eingesetzt werden. Gleichzeitig ist die Anwendung von g-CNs als Photokatalysatoren in der organischen Synthese auf wenige Reaktionen beschränkt geblieben. Die kumulative Habilitation fasst die Forschungsarbeiten zusammen, die von der Gruppe "Innovative heterogene Photokatalyse" zwischen 2017 und 2023 auf dem Gebiet der organischen Photokatalyse mit Kohlenstoffnitrid durchgeführt wurden, die von Dr. Oleksandr Savatieiev geleitet wird. g-CN-Photokatalysatoren aktivieren Moleküle, d. h. sie erzeugen ihre reaktiveren Zwischenprodukte mit offener Schale über drei Modi: i) photoinduzierter Elektronentransfer (PET); ii) protonengekoppelter Elektronentransfer im angeregten Zustand (ES-PCET) oder direkter Wasserstoffatomtransfer (dHAT); iii) Energietransfer (EnT). Der Bereich der Reaktionen, die über oxidativen PET ablaufen, d. h. die Ein-Elektronen-Oxidation eines Substrats zum entsprechenden Radikalkation, wird durch die Synthese von Sulfonylchloriden aus S-Acetylthiophenolen dargestellt. Der Bereich der Reaktionen, die über reduktive PET ablaufen, d. h. Reduktion eines Substrats mit einem Elektron zum entsprechenden radikalischen Anion, wird durch die Synthese von γ,γ-Dichloroketonen aus Enonen und Chloroform repräsentiert. Aufgrund der zahlreichen sp2-hybridisierten Stickstoffatome in der Struktur der g-CN-Materialien können sie X-H-Bindungen in organischen Molekülen spalten und temporäre Wasserstoffatome speichern. Der ES-PCET- oder dHAT-Modus der Aktivierung organischer Moleküle zu den entsprechenden Radikalen wird bei Substraten mit relativ sauren X-H-Bindungen und solchen, die sich durch eine niedrige Bindungsdissoziationsenergie auszeichnen, wie z. B. die C-H-Bindung neben den Heteroelementen, durchgeführt. Andererseits reduziert reduktiv gequenchtes g-CN, das ein Wasserstoffatom trägt, eine Carbonylverbindung über PCET zum Ketylradikal, was im Vergleich zum Elektronentransfer der thermodynamisch günstigere Weg ist. Der Umfang dieser Reaktionen wird durch die Cyclodimerisierung von α,β-ungesättigten Ketonen zu Cyclopentanolen dargestellt. Der angeregte Zustand von g-CN zeigt eine komplexe Dynamik mit der anfänglichen Bildung eines angeregten Singulett-Zustands, der beim Übergang zwischen den Systemen einen angeregten Triplett-Zustand erzeugt, der durch eine Lebensdauer von > 2 μs gekennzeichnet ist. Aufgrund der langen Lebensdauer aktivieren g-CN organische Moleküle über EnT. So sensibilisiert g-CN beispielsweise Singulett-Sauerstoff, der das wichtigste Zwischenprodukt bei der Dehydrierung von Aldoximen zu Nitriloxiden ist. Das transiente Nitriloxid unterliegt einer [3+2]-Cycloaddition zu Nitrilen und ergibt Oxadiazole-1,2,4. PET, ES-PCET und EnT sind grundlegende Phänomene, die über die organische Photokatalyse hinaus Anwendung finden. Hybridkomposit wird durch die Kombination von leitfähigen Polymeren wie Poly(3,4-ethylendioxythiophen)polystyrolsulfonat (PEDOT:PSS) mit Kaliumpoly(heptazinimid) (K-PHI) gebildet. Nach PET modulierte K-PHI die Population der Polaronen und damit die Leitfähigkeit von PEDOT:PSS. Der Ausgangszustand von PEDOT:PSS wird wiederhergestellt, wenn das Material O2 ausgesetzt wird. K-PHI:PEDOT:PSS kann für die O2-Sensorik verwendet werden. In Gegenwart von Elektronendonatoren, wie tertiären Aminen und Alkoholen, und bei Lichteinstrahlung wird K-PHI photogeladen - das g-CN-Material sammelt Elektronen und ladungsausgleichende Kationen an. Dieser photogeladene Zustand ist unter anaeroben Bedingungen wochenlang stabil, gleichzeitig ist er aber ein starkes Reduktionsmittel. Diese Eigenschaft ermöglicht die zeitliche Entkopplung von Lichtsammlung und Energiespeicherung in Form von Elektron-Protonen-Paaren von der Nutzung in der organischen Synthese. Der photogeladene Zustand von K-PHI reduziert Nitrobenzol zu Anilin und ermöglicht die Dimerisierung von α,β-ungesättigten Ketonen zu Hexadienonen im Dunkeln. KW - carbon nitride KW - photocatalysis KW - photochemistry KW - photocharging KW - organic synthesis Y1 - 2023 ER - TY - JOUR A1 - López-Salas, Nieves A1 - Albero, Josep T1 - CxNy BT - new carbon nitride organic photocatalysts JF - Frontiers in Materials N2 - The search for metal-free and visible light-responsive materials for photocatalytic applications has attracted the interest of not only academics but also the industry in the last decades. Since graphitic carbon nitride (g-C3N4) was first reported as a metal-free photocatalyst, this has been widely investigated in different light-driven reactions. However, the high recombination rate, low electrical conductivity, and lack of photoresponse in most of the visible range have elicited the search for alternatives. In this regard, a broad family of carbon nitride (CxNy) materials was anticipated several decades ago. However, the attention of the researchers in these materials has just been awakened in the last years due to the recent success in the syntheses of some of these materials (i.e., C3N3, C2N, C3N, and C3N5, among others), together with theoretical simulations pointing at the excellent physico-chemical properties (i.e., crystalline structure and chemical morphology, electronic configuration and semiconducting nature, or high refractive index and hardness, among others) and optoelectronic applications of these materials. The performance of CxNy, beyond C3N4, has been barely evaluated in real applications, including energy conversion, storage, and adsorption technologies, and further work must be carried out, especially experimentally, in order to confirm the high expectations raised by simulations and theoretical calculations. Herein, we have summarized the scarce literature related to recent results reporting the synthetic routes, structures, and performance of these materials as photocatalysts. Moreover, the challenges and perspectives at the forefront of this field using CxNy materials are disclosed. We aim to stimulate the research of this new generation of CxNy-based photocatalysts, beyond C3N4, with improved photocatalytic efficiencies by harnessing the striking structural, electronic, and optical properties of this new family of materials. KW - CXNY KW - carbon nitrides KW - C2N KW - C3N KW - C1N1 KW - C3N5 KW - photocatalysis Y1 - 2021 U6 - https://doi.org/10.3389/fmats.2021.772200 SN - 2296-8016 VL - 8 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Prüfert, Chris A1 - Urban, Raphael David A1 - Fischer, Tillmann Georg A1 - Villatoro, José Andrés A1 - Riebe, Daniel A1 - Beitz, Toralf A1 - Belder, Detlev A1 - Zeitler, Kirsten A1 - Löhmannsröben, Hans-Gerd T1 - In situ monitoring of photocatalyzed isomerization reactions on a microchip flow reactor by IR-MALDI ion mobility spectrometry JF - Analytical and bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica N2 - The visible-light photocatalyticE/Zisomerization of olefins can be mediated by a wide spectrum of triplet sensitizers (photocatalysts). However, the search for the most efficient photocatalysts through screenings in photo batch reactors is material and time consuming. Capillary and microchip flow reactors can accelerate this screening process. Combined with a fast analytical technique for isomer differentiation, these reactors can enable high-throughput analyses. Ion mobility (IM) spectrometry is a cost-effective technique that allows simple isomer separation and detection on the millisecond timescale. This work introduces a hyphenation method consisting of a microchip reactor and an infrared matrix-assisted laser desorption ionization (IR-MALDI) ion mobility spectrometer that has the potential for high-throughput analysis. The photocatalyzedE/Zisomerization of ethyl-3-(pyridine-3-yl)but-2-enoate (E-1) as a model substrate was chosen to demonstrate the capability of this device. Classic organic triplet sensitizers as well as Ru-, Ir-, and Cu-based complexes were tested as catalysts. The ionization efficiency of theZ-isomer is much higher at atmospheric pressure which is due to a higher proton affinity. In order to suppress proton transfer reactions by limiting the number of collisions, an IM spectrometer working at reduced pressure (max. 100 mbar) was employed. This design reduced charge transfer reactions and allowed the quantitative determination of the reaction yield in real time. Among 14 catalysts tested, four catalysts could be determined as efficient sensitizers for theE/Zisomerization of ethyl cinnamate derivativeE-1. Conversion rates of up to 80% were achieved in irradiation time sequences of 10 up to 180 s. With respect to current studies found in the literature, this reduces the acquisition times from several hours to only a few minutes per scan. KW - microchip KW - reaction monitoring KW - IR-MALDI KW - ion mobility spectrometry KW - photochemistry KW - photocatalysis KW - Olefin isomerization Y1 - 2020 U6 - https://doi.org/10.1007/s00216-020-02923-y SN - 1618-2642 SN - 1618-2650 VL - 412 IS - 28 SP - 7899 EP - 7911 PB - Springer CY - Heidelberg ER - TY - THES A1 - Markushyna, Yevheniia T1 - Modern photoredox transformations applied to the needs of organic synthesis N2 - Abstract. Catalysis is one of the most effective tools for the highly efficient assembly of complex molecular structures. Nevertheless, it is mainly represented by transition metal-based catalysts and typically is an energy consuming process. Therefore, photocatalysis utilizing solar energy is one of the appealing approaches to overcome these problems. A great alternative to classic transition metal-based photocatalysts, carbon nitrides, a group of organic polymeric semiconductors, have already shown their efficiency in water splitting, CO2 reduction, and organic pollutants degradation. However, these materials have also a great potential for the use in functionalization of complex organic molecules for synthetic needs as it was shown in recent years. This work addresses the challenge to develop efficient system for heterogeneous organic photocatalysis, employing cheap and environmentally benign photocatalysts – carbon nitrides. Herein, fundamental properties of semiconductors are studied from the organic chemistry standpoint; the inherent properties of carbon nitrides, such as ability to accumulate electrons, are deeply investigated and their effect on the reaction outcome is established. Thus, understanding of the electron charging processes allowed for the synthesis of otherwise hardly-achieved diazetidines-1,3 by tetramerization of benzylamines. Furthermore, the high electron capacity of Potassium Poly(heptazine imide)s (K-PHI) made possible a multi-electron reduction of aromatic nitro compounds to bare or formylated anilines. Additionally, two deep eutectic solvents (DES) were designed as a sustainable reaction media and reducing reagent for this reaction. Eventually, the high oxidation ability of carbon nitride K-PHI is employed in a challenging reaction of halide anion oxidation (Cl―, Br―) to accomplish electrophilic substitution in aromatic ring. The possibility to utilize NaCl solution (seawater mimetic) for the chlorination of electron rich arenes was shown. Eventually, light itself is used as a tool in a chromoselective photocatalytic oxidation of aromatic thiols and thioacetatas to three different compounds, using UV, blue, and red LEDs. All in all, the work enhances understanding the mechanism of heterogeneous photocatalysis in synthetic organic reactions and therefore, is a step forward to the sustainable methods of synthesis in organic chemistry. N2 - Abstrakt. Die Katalyse ist eines der effektivsten Werkzeuge für den hocheffizienten Aufbau komplexer molekularer Strukturen. Dennoch wird sie hauptsächlich durch Katalysatoren auf der Basis von Übergangsmetallen repräsentiert und ist typischerweise ein energieaufwendiger Prozess. Daher ist die Photokatalyse unter Nutzung der Sonnenenergie einer der attraktiven Ansätze zur Überwindung dieser Probleme. Kohlenstoffnitride, eine Gruppe organischer polymerer Halbleiter, haben ihre Effizienz bei der Wasserspaltung, der CO2-Reduktion und dem Abbau organischer Schadstoffe bereits unter Beweis gestellt. Diese Materialien haben jedoch auch ein großes Potenzial für die Funktionalisierung komplexer organischer Moleküle für synthetische Zwecke, wie sich in den letzten Jahren gezeigt hat. Diese Arbeit befasst sich mit der Herausforderung, ein effizientes System für die heterogene organische Photokatalyse zu entwickeln, bei dem billige und umweltfreundliche Photokatalysatoren – Kohlenstoffnitride – zum Einsatz kommen. Dabei werden grundlegende Eigenschaften von Halbleitern aus organisch-chemischer Sicht untersucht; die inhärenten Eigenschaften von Kohlenstoffnitriden, wie die Fähigkeit zur Elektronenanreicherung, werden eingehend untersucht und ihr Einfluss auf das Reaktionsergebnis festgestellt. So ermöglichte das Verständnis der Elektronenladungsvorgänge die Synthese von sonst kaum erreichten Diazetidinen-1,3 durch Tetramerisierung von Benzylaminen. Darüber hinaus ermöglichte die hohe Elektronenkapazität von Kalium-Polyheptazinimid (K-PHI) eine Mehrelektronenreduktion von aromatischen Nitroverbindungen zu „nackten“ oder formylierten Anilinen. Zudem wird die hohe Oxidationsfähigkeit von Kohlenstoffnitrid, K-PHI, in einer herausfordernden Reaktion der Oxidation von Halogenidanionen genutzt, um eine elektrophile Substitution im aromatischen Ring zu erreichen. Schließlich wird das Licht selbst als Werkzeug in einer chromoselektiven photokatalytischen Oxidation von aromatischen Thiolen und Thioacetaten verwendet, um drei verschiedene Verbindungen unter Verwendung von UV-, blauen und roten LEDs zu syntetisieren. Alles in allem verbessert die Arbeit das Verständnis des Mechanismus der heterogenen Photokatalyse in synthetischen organischen Reaktionen und ist daher ein Schritt vorwärts zu nachhaltigen Synthesemethoden in der organischen Chemie. KW - photocatalysis KW - carbon nitride KW - organic chemistry KW - photoredox catalysis KW - Photochemie KW - Photokatalyse Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-477661 ER - TY - THES A1 - Li, Lina T1 - Preparation of novel photoactive materials T1 - Herstellung von neuen photoaktiven Materialien BT - different pre-compositions, post-modifications and improved performance BT - verschiedene Vorzusammensetzungen, Post-Modifikationen und verbesserte Leistung N2 - Photocatalysis is considered significant in this new energy era, because the inexhaustibly abundant, clean, and safe energy of the sun can be harnessed for sustainable, nonhazardous, and economically development of our society. In the research of photocatalysis, the current focus was held by the design and modification of photocatalyst. As one of the most promising photocatalysts, g-C3N4 has gained considerable attention for its eye-catching properties. It has been extensively explored in photocatalysis applications, such as water splitting, organic pollutant degradation, and CO2 reduction. Even so, it also has its own drawbacks which inhibit its further application. Inspired by that, this thesis will mainly present and discuss the process and achievement on the preparation of some novel photocatalysts and their photocatalysis performance. These materials were all synthesized via the alteration of classic g-C3N4 preparation method, like using different pre-compositions for initial supramolecular complex and functional group post-modification. By taking place of cyanuric acid, 2,5-Dihydroxy-1,4-benzoquinone and chloranilic acid can form completely new supramolecular complex with melamine. After heating, the resulting products of the two complex shown 2D sheet-like and 1D fiber-like morphologies, respectively, which maintain at even up to high temperature of 800 °C. These materials cover crystals, polymers and N-doped carbons with the increase of synthesis temperature. Based on their different pre-compositions, they show different dye degradation performances. For CLA-M-250, it shows the highest photocatalytic activity and strong oxidation capacity. It shows not only great photo-performance in RhB degradation, but also oxygen production in water splitting. In the post-modification method, a novel photocatalysis solution was proposed to modify carbon nitride scaffold with cyano group, whose content can be well controlled by the input of sodium thiocyanate. The cyanation modification leads to narrowed band gap as well as improved photo-induced charges separation. Cyano group grafted carbon nitride thus shows dramatically enhanced performance in the photocatalytic coupling reaction between styrene and sodium benzenesulfinate under green light irradiation, which is in stark contrast with the inactivity of pristine g-C3N4. N2 - Die Sonne stellt eine Quelle für unerschöpfliche, saubere und sichere Energie dar, die für eine nachhaltige, ungefährliche und ökonomische Entwicklung unserer Gesellschaft genutzt werden kann, daher wird Photokatalyse heutzutage als äußerst vielversprechend angesehen. Bei der Erforschung der Photokatalyse lag der Fokus auf dem Design und der Modifizierung von Photokatalysatoren. Als einer der vielversprechendsten Photokatalysatoren hat sich g-C3N4 erwiesen. Es wurde ausführlich für Anwendungen wie z.B. Wasserspaltung, den Abbau organischer Schadstoffe und CO2-Reduktion untersucht. Trotzdem hat es auch Nachteile, die eine weitere Anwendung erschweren. Deshalb wird in dieser Arbeit hauptsächlich die Herstellung und Eigenschaften von neuartigen auf auf g-C3N4 basierenden Photokatalysatoren vorgestellt und diskutiert. Diese Materialien wurden mittels Verfahren hergestellt, bei denen die klassische g-C3N4-Herstellungsmethode geändert wurde, wie z.B. durch die Verwendung unterschiedlicher Zusammensetzungen und durch die Modifizierung von funktionellen Gruppen. Im Vergleich zu g-C3N4 weisen diese neu hergestellten Materialien unterschiedliche photokatalytische Eigenschaften auf. KW - photocatalysis KW - Photokatalyse KW - CN materials KW - CN-Materialien KW - supramolecular KW - Supramolekular KW - post-modification KW - Post-Modifikationen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-410952 ER - TY - THES A1 - Jordan, Thomas T1 - CxNy-materials from supramolecular precursors for “All-Carbon” composite materials T1 - CxNy-Materialien aus supramolekularen Precursoren für „All-Carbon“-Komposit-Materialien N2 - Among modern functional materials, the class of nitrogen-containing carbons combines non-toxicity and sustainability with outstanding properties. The versatility of this materials class is based on the opportunity to tune electronic and catalytic properties via the nitrogen content and –motifs: This ranges from the electronically conducting N-doped carbon, where few carbon atoms in the graphitic lattice are substituted by nitrogen, to the organic semiconductor graphitic carbon nitride (g-C₃N₄), with a structure based on tri-s-triazine units. In general, composites can reveal outstanding catalytic properties due to synergistic behavior, e.g. the formation of electronic heterojunctions. In this thesis, the formation of an “all-carbon” heterojunction was targeted, i.e. differences in the electronic properties of the single components were achieved by the introduction of different nitrogen motives into the carbon lattice. Such composites are promising as metal-free catalysts for the photocatalytic water splitting. Here, hydrogen can be generated from water by light irradiation with the use of a photocatalyst. As first part of the heterojunction, the organic semiconductor g-C₃N₄ was employed, because of its suitable band structure for photocatalytic water splitting, high stability and non-toxicity. The second part was chosen as C₂N, a recently discovered semiconductor. Compared to g-C₃N₄, the less nitrogen containing C₂N has a smaller band gap and a higher absorption coefficient in the visible light range, which is expected to increase the optical absorption in the composite eventually leading to an enhanced charge carrier separation due to the formation of an electronic heterojunction. The aim of preparing an “all-carbon” composite included the research on appropriate precursors for the respective components g-C₃N₄ and C₂N, as well as strategies for appropriate structuring. This was targeted by applying precursors which can form supramolecular pre-organized structures. This allows for more control over morphology and atom patterns during the carbonization process. In the first part of this thesis, it was demonstrated how the photocatalytic activity of g-C₃N₄ can be increased by the targeted introduction of defects or surface terminations. This was achieved by using caffeine as a “growth stopping” additive during the formation of the hydrogen-bonded supramolecular precursor complexes. The increased photocatalytic activity of the obtained materials was demonstrated with dye degradation experiments. The second part of this thesis was focused on the synthesis of the second component C₂N. Here, a deep eutectic mixture from hexaketocyclohexane and urea was structured using the biopolymer chitosan. This scaffolding resulted in mesoporous nitrogen-doped carbon monoliths and beads. CO₂- and dye-adsorption experiments with the obtained monolith material revealed a high isosteric heat of CO₂-adsorption and showed the accessibility of the monolithic pore system to larger dye molecules. Furthermore, a novel precursor system for C₂N was explored, based on organic crystals from squaric acid and urea. The respective C₂N carbon with an unusual sheet-like morphology could be synthesized by carbonization of the crystals at 550 °C. With this precursor system, also microporous C₂N carbon with a BET surface area of 865 m²/g was obtained by “salt-templating” with ZnCl₂. Finally, the preparation of a g-C₃N₄/C₂N “all carbon” composite heterojunction was attempted by the self-assembly of g-C₃N₄ and C₂N nanosheets and tested for photocatalytic water splitting. Indeed, the composites revealed high rates of hydrogen evolution when compared to bulk g-C₃N₄. However, the increased catalytic activity was mainly attributed to the high surface area of the nanocomposites rather than to the composition. With regard to alternative composite synthesis ways, first experiments indicated N-Methyl-2-pyrrolidon to be suitable for higher concentrated dispersion of C₂N nanosheets. Eventually, the results obtained in this thesis provide precious synthetic contributions towards the preparation and processing of carbon/nitrogen compounds for energy applications. N2 - Eine interessante Materialklasse für technologische Anwendungen sind Kohlenstoff/Stickstoff-Materialien, die sich durch Ungiftigkeit und Umweltfreundlichkeit bei gleichzeitig interessanten katalytischen Eigenschaften auszeichnen. Die Vielseitigkeit dieser Materialkasse basiert auf der Möglichkeit ihre katalytischen und elektronischen Eigenschaften über Stickstoff-Anteil und –Funktionalitäten zu beeinflussen. Die vorliegende Arbeit fokussierte sich auf Komposite zwischen verschiedenen Kohlenstoff/Stickstoff-Derivaten, für welche aufgrund ihrer unterschiedlichen elektronischen Eigenschaften die Bildung elektronischer Heteroübergänge erwartet werden kann. Solche Komposite sind vielversprechende Materialien für die Erzeugung von Wasserstoff durch die photokatalytische Spaltung von Wasser. Für die eine Komponente des Komposits wurde das graphitische Kohlenstoffnitrid g-C₃N₄ eingesetzt, welches durch seine elektronische Struktur und Stabilität ein geeignetes Material für die photokatalytische Wasserspaltung ist. Für die andere Komponente des Komposits wurde eine erst kürzlich erstmalig beschriebene Kohlenstoff/Stickstoff Verbindung eingesetzt, das Kohlenstoffnitrid C₂N. Für dieses Komposit ist eine im Vergleich zu den einzelnen Komponenten stark erhöhte photokatalytische Aktivität zu erwarten. Neben dem Ziel der Herstellung eines solchen Komposits, fokussierte sich diese Arbeit auch darauf, neue Wege zur Synthese und Strukturierung der einzelnen Komponenten zu entwickeln. Dies sollte über supramolekulare Präkursor-Komplexe erfolgen, mit welchen eine erhöhte Einflussnahme auf Karbonisierungsprozesse erlangt werden kann. Im ersten Teil der Arbeit, welcher auf das graphitische Kohlenstoffnitrid g-C₃N₄ fokussiert war, wurde gezeigt wie die photokatalytische Aktivität dieser Komponente durch den gezielten Einbau von Defekten erhöht werden kann. Dies wurde über einen durch Koffein modifizierten supramolekularen Komplex als Präkursor erreicht. Die erhöhte photokatalytische Aktivität wurde über Farbstoff-Zersetzung nachgewiesen. Der zweite Teil der Arbeit war auf die Herstellung und Strukturierung der neuartigen Verbindung C₂N fokussiert. Hier wurde gezeigt, wie eine eutektische Mischung zwischen Hexaketocyclohexan und Harnstoff als C₂N-Präkursor mit dem Polysaccharid Chitosan strukturiert werden kann. Hierbei wurden poröse Stickstoffhaltige Kohlenstoff-Monolithen und -Perlen erhalten, die eine hohe Adsorptionswärme für die CO₂-Adsorption zeigten. Weiterhin wurde ein neuartiger Präkursor für C₂N vorgestellt, eine organisch-kristalline Verbindung zwischen Quadratsäure und Harnstoff. Durch Karbonisation dieser Verbindung bei 550 °C wurde ein Material mit einer Zusammensetzung von C₂N und einer ungewöhnlichen, schichtartigen Morphologie erhalten. Über eine eutektische Salzschmelze mit Zinkchlorid, konnte mit diesem Präkursor-System auch mikroporöser C₂N-Kohlenstoff mit einer BET-Oberfläche von 865 m²/g hergestellt werden. Im letzten Teil dieser Arbeit wurde die Herstellung des g-C₃N₄/C₂N-Komposits versucht, über die Selbstassemblierung von kolloidal dispergierten g-C₃N₄- und C₂N-Nanopartikeln. Die Nanopartikel wurden über Ultraschall-Behandlungen von Dispersionen dieser Komponenten hergestellt. Die erhaltenen Komposite zeigten eine hohe Aktivität zur photokatalytischen Wasserspaltung, wobei dies eher auf die hohe Oberfläche der Nanopartikel als auf ihre Zusammensetzung zurückgeführt wurde. Im Hinblick auf mögliche Alternativen zur Kompositherstellung, wurden erste Experimente zu höher konzentrierten kolloidalen Dispersionen von C₂N in dem organischen Lösungsmittel N-Methyl-2-pyrrolidon durchgeführt. Zusammenfassend, die Ergebnisse die in dieser Arbeit erhalten wurden, liefern einen wertvollen Beitrag zur Synthese und Strukturierung von Kohlenstoff/Stickstoff-Materialien sowie deren Anwendungen im Bereich alternative Energien. KW - carbon nitrides KW - supramolecular chemistry KW - porous materials KW - composite materials KW - photocatalysis KW - Kohlenstoffnitride KW - supramolekulare Chemie KW - poröse Materialien KW - Komposite KW - Photokatalyse Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398855 ER -