TY - THES A1 - Audörsch, Stephan T1 - Die Synthese von (2Z,4E)-Diencarbonsäureestern und ihre Anwendung in der Totalsynthese von Polyacetylenen T1 - Synthesis of (2Z,4E)-dienoic acid ester and their application in the total synthesis of natural occurring polyacetylenes N2 - Z,E-Diene sind ein häufig auftretendes Strukturmerkmal in Naturstoffen. Aus diesem Grund ist die einfache Darstellung dieser Struktureinheit von großen Interesse in der organischen Chemie. Das erste Ziel der vorliegenden Arbeit war daher die Weiterentwicklung der Ringschlussmetathese-/ baseninduzierten Ringöffnungs-/ Veresterungssequenz (RBRV-Sequenz) zur Synthese von (2Z,4E)-Diencarbonsäureethylestern ausgehend von Butenoaten. Dazu wurde zunächst die RBRV-Sequenz optimiert. Diese aus drei Schritten bestehende Sequenz konnte in einem Eintopf-Verfahren angewendet werden. Die Ringschlussmetathese gelang mit einer Katalysatorbeladung von 1 mol% des GRUBBS-Katalysators der zweiten Generation in Dichlormethan. Für die baseninduzierte Ringöffnung des β,γ-ungesättigten δ Valerolactons wurde NaHMDS verwendet. Die Alkylierung der Carboxylatspezies gelang mit dem MEERWEIN-Reagenz. Die Anwendbarkeit der Sequenz wurde für verschiedene Substrate demonstriert. Die Erweiterung der Methode auf α-substituierte Butenoate unterlag starken Einschränkungen. So konnte der Zugang für α Hydroxyderivate realisiert werden. Bei der Anwendung der RBRV-Sequenz auf die α-substituierten Butenoate wurde festgestellt, dass diese sich nur in moderaten Ausbeuten umsetzen ließen und zudem nicht selektiv zu den (2E,4E)-konfigurierten α-substituierten-Dienestern reagierten. Der Einsatz von Eninen unter den Standardbedingungen der RBRV-Sequenz gelang nicht. Erst nach Modifizierung der Sequenz (höhere Katalysatorbeladung, Wechsel des Lösungsmittels) konnten die [3]Dendralen-Produkte in geringen Ausbeuten erhalten werden. Im zweiten Teil der Arbeit wurde der Einsatz von (2Z,4E)-Diencarbonsäureethylestern in der Totalsynthese von Naturstoffen untersucht. Dazu wurden zunächst die Transformationsmöglichkeiten der Ester geprüft. Es konnte gezeigt werden, dass sich (2Z,4E)-Diencarbonsäureethylester insbesondere zur Synthese von (2Z,4E)-Aldehyden sowie zum Aufbau der (3Z,5E)-Dien-1-in-Struktur eignen. Anhand dieser Ergebnisse wurde im Anschluss die RBRV-Sequenz in der Totalsynthese eingesetzt. Dazu wurde zunächst der (2Z,4E)-Dienester Microsphaerodiolin in seiner ersten Totalsynthese auf drei verschiedene Routen hergestellt. Im Anschluss wurden sechs verschiedene Polyacetylene mit einer (3Z,5E)-Dien-1-in-Einheit hergestellt. Schlüsselschritte in ihrer Synthese waren immer die RBRV-Sequenz zum Aufbau der Z,E-Dien-Einheit, die Transformation des Esters in ein terminales Alkin sowie die CADIOT-CHODKIEWICZ-Kupplung zum Aufbau unsymmetrischer Polyine. Alle sechs Polyacetylene wurden zum ersten Mal in einer Totalsynthese synthetisiert. Drei Polyacetylene wurden ausgehend von (S)-Butantriol enantiomerenrein dargestellt. Anhand ihrer Drehwerte konnte eine Revision der von YAO und Mitarbeitern vorgenommen Zuordnung der Absolutkonfiguration der Naturstoffe vorgenommen werden. N2 - Z,E-Dienes are a common motif in natural products. Therefore their simple preparation is of high interest. The first part of this work focuses on the improvement of the one-pot sequence “RBRV” consisting of three steps: ring closing metathesis, base induced ring opening and esterification of butenoates. This method yields (2Z,4E) dienoic acid esters. As optimized conditions were found the use of Grubbs catalysts 2nd Generation in dichloromethane, NaHMDS as base and Meerwein’s reagent as alkylating agent. The extension of this method on α-substituted butenoates was subject to many restrictions. The synthesis of precursors was realized for α-hydroxy derivates only. Application of these substrates in the RBRV sequence gave the desired products in moderate yield and diminished selectivity. The use of enines was demonstrated as well. For these substrates changes of the conditions were necessary. The products, [3]dendralenes, were obtained in low yield and excellent selectivity. The second part of this thesis focuses on the application of the RBRV-sequence in the total synthesis of natural products with a Z,E-diene unit. For this purpose it was demonstrated how the ester function can be transformed. As result it was shown that especially Z,E-diene-alkynes can be easily synthesized from Z,E-diene esters. Based on these results the RBRV was used in the synthesis of some natural products. These include Microsphaerodiolin, Atractylodemayne A, C and F as well as three other, unnamed, polyacetylenes. All of them have been synthesized for the first time. Three of them were synthesized in enatioselective manner utilizing enantiopure 1,2,4-butane triole as starting material. KW - Polyacetylene KW - Totalsynthese KW - 2Z,4E-Diencarbonsäureester KW - organische Chemie KW - polyacetylenes KW - total synthesis KW - organic chemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-92366 ER - TY - THES A1 - Won, Jooyoung T1 - Dynamic and equilibrium adsorption behaviour of ß-lactoglobulin at the solution/tetradecane interface: Effect of solution concentration, pH and ionic strength T1 - Dynamik und Gleichgewicht der Adsorption von ß-Lactoglobulin an der Grenzfläche Lösung / Tetradecan (W/TD) N2 - Proteins are amphiphilic and adsorb at liquid interfaces. Therefore, they can be efficient stabilizers of foams and emulsions. β-lactoglobulin (BLG) is one of the most widely studied proteins due to its major industrial applications, in particular in food technology. In the present work, the influence of different bulk concentration, solution pH and ionic strength on the dynamic and equilibrium pressures of BLG adsorbed layers at the solution/tetradecane (W/TD) interface has been investigated. Dynamic interfacial pressure (Π) and interfacial dilational elastic modulus (E’) of BLG solutions for various concentrations at three different pH values of 3, 5 and 7 at a fixed ionic strength of 10 mM and for a selected fixed concentration at three different ionic strengths of 1 mM, 10 mM and 100 mM are measured by Profile Analysis Tensiometer PAT-1 (SINTERFACE Technologies, Germany). A quantitative data analysis requires additional consideration of depletion due to BLG adsorption at the interface at low protein bulk concentrations. This fact makes experiments more efficient when oil drops are studied in the aqueous protein solutions rather than solution drops formed in oil. On the basis of obtained experimental data, concentration dependencies and the effect of solution pH on the protein surface activity was qualitatively analysed. In the presence of 10 mM buffer, we observed that generally the adsorbed amount is increasing with increasing BLG bulk concentration for all three pH values. The adsorption kinetics at pH 5 result in the highest Π values at any time of adsorption while it exhibits a less active behaviour at pH 3. Since the experimental data have not been in a good agreement with the classical diffusion controlled model due to the conformational changes which occur when the protein molecules get in contact with the hydrophobic oil phase in order to adapt to the interfacial environment, a new theoretical model is proposed here. The adsorption kinetics data were analysed with the newly proposed model, which is the classical diffusion model but modified by assuming an additional change in the surface activity of BLG molecules when adsorbing at the interface. This effect can be expressed through the adsorption activity constant in the corresponding equation of state. The dilational visco-elasticity of the BLG adsorbed interfacial layers is determined from measured dynamic interfacial tensions during sinusoidal drop area variations. The interfacial tension responses to these harmonic drop oscillations are interpreted with the same thermodynamic model which is used for the corresponding adsorption isotherm. At a selected BLG concentration of 2×10-6 mol/l, the influence of the ionic strength using different buffer concentration of 1, 10 and 100 mM on the interfacial pressure was studied. It is affected weakly at pH 5, whereas it has a strong impact by increasing buffer concentration at pH 3 and 7. In conclusion, the structure formation of BLG adsorbed layer in the early stage of adsorption at the W/TD interface is similar to those of the solution/air (W/A) surface. However, the equation of state at the W/TD interface provides an adsorption activity constant which is almost two orders of magnitude higher than that for the solution/air surface. At the end of this work, a new experimental tool called Drop and Bubble Micro Manipulator DBMM (SINTERFACE Technologies, Germany) has been introduced to study the stability of protein covered bubbles against coalescence. Among the available protocols the lifetime between the moment of contact and coalescence of two contacting bubble is determined for different BLG concentrations. The adsorbed amount of BLG is determined as a function of time and concentration and correlates with the observed coalescence behaviour of the contacting bubbles. N2 - Die vorliegende Arbeit ist ein Beitrag zum Verständnis des Überganges von der qualitativen zur quantitativen Beschreibung der Adsorption von Proteinen an der Wasser/Öl- Grenzfläche. Dabei wird die Adsorption des Molkeproteins ß-Lactoglobulin (BLG) an der Wasser/Tetradekan (W/TD) Grenzfläche untersucht. Die Proteinadsorption an Grenzflächen zwischen zwei nicht mischbaren Flüssigkeiten ist ein Zeitprozess. Die Tropfenprofil-Analysen-Tensiometrie (PAT) hat sich als optimale Methode erwiesen, um den Prozess der Bildung von Proteinadsorptionsschichten an Flüssig-/flüssig-Grenzflächen quantitativ zu untersuchen. Die gemessenen dynamischen Grenzflächenspannungen können genutzt werden, um die adsorbierte Menge von Protein an Grenzflächen zu bestimmen. Zusätzlich erlaubt die Methode, durch periodische Tropfenoszillationen, die Messung der Dilatations-Viskoelastizität. Die experimentellen Ergebnisse zeigen deutlich, dass die Adsorption von Proteinen mit der Konzentration ansteigt. Der Adsorptionsprozess von Proteinen ist ähnlich dem von Tensiden, allerdings wird seine Beschreibung wesentlich komplizierter, durch die zusätzliche Möglichkeit der Konformationsänderungen der Proteinmoleküle an der Grenzfläche. Ein kürzlich im Rahmen dieser Dissertation entwickeltes Modell zur Adsorptionskinetik von Proteinen wurde genutzt, um experimentelle Daten für BLG zu interpretieren. Dieses kinetische Modell erlaubt es, den Mechanismus der Proteinadsorption an der Wasser/Öl-Grenzfläche zu beschreiben, was durch ältere Modelle bisher nicht möglich war. Im neu entwickelten Modell wurde die klassische Diffusionstheorie so modifiziert, dass eine Änderung der Adsorptionsaktivität der adsorbierenden Proteinmoleküle berücksichtigt wird. Die Änderung der Adsorptionsaktivität geschieht durch den Kontakt adsorbierter BLG-Moleküle an der Wasser/Öl-Grenzfläche. Es wird nach diesem neuen Modell angenommen, dass die Adsorptionsaktivität eine Funktion der Adsorptionszeit ist. Die ansteigende Adsorptionaktivität ist erforderlich, um den Adsorptionsprozess von BLG über den gesamten Zeitbereich quantitativ zu beschrieben. Mit diesem neuen Modell wurde es möglich, die experimentellen Daten zur Adsorptionskinetik sowie zur Dilatationsrheologie von Adsorptionsschichten bei unterschiedlichen BLG-Konzentrationen, pH-Werten und Ionenstärken an der Grenzfläche Lösung/Tetradekan quantitativ zu beschreiben. Die Ergebnisse dienen als Ausgangspunkt für weitere Entwicklungen zur Verbesserung des Verständnisses der Stabilität von Schäumen und Emulsionen, die durch die Dynamik der Adsorption von Molekülen wie BLG signifikant beeinflusst wird. KW - beta-lactoglobulin KW - water/tetradecane interface KW - drop profile analysis tensiometry KW - dynamic interfacial tensions KW - protein adsorption KW - pH effect KW - ionic strength effect KW - protein stabilized foams KW - drop and bubble coalescence KW - interfacial dynamics KW - capillary pressure tensiometry KW - drop-drop interaction KW - bubble-bubble interaction KW - ß-Lactoglobulin KW - Flüssig-/flüssig-Grenzflächen KW - Wasser/Öl-Grenzfläche KW - Grenzfläche Lösung/Tetradecan KW - Dynamik der Adsorption KW - Gleichgewicht der Adsorption KW - Proteinadsorption KW - Tropfenprofil-Analysen-Tensiometrie KW - Tropfenoszillationen KW - Dilatations-Viskoelastizität KW - klassische Diffusionstheorie KW - Konformationsänderungen KW - Adsorptionsaktivität KW - Wirkung des pH-Werten KW - Wirkung des Ionenstärken KW - Stabilität von Schäumen KW - Stabilität von Emulsionen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-99167 ER - TY - THES A1 - Couturier, Jean-Philippe T1 - New inverse opal hydrogels as platform for detecting macromolecules T1 - Neue inverse Opal-Hydrogele als Plattform für die Detektion von Makromolekülen N2 - In this thesis, a route to temperature-, pH-, solvent-, 1,2-diol-, and protein-responsive sensors made of biocompatible and low-fouling materials is established. These sensor devices are based on the sensitivemodulation of the visual band gap of a photonic crystal (PhC), which is induced by the selective binding of analytes, triggering a volume phase transition. The PhCs introduced by this work show a high sensitivity not only for small biomolecules, but also for large analytes, such as glycopolymers or proteins. This enables the PhC to act as a sensor that detects analytes without the need of complex equipment. Due to their periodical dielectric structure, PhCs prevent the propagation of specific wavelengths. A change of the periodicity parameters is thus indicated by a change in the reflected wavelengths. In the case explored, the PhC sensors are implemented as periodically structured responsive hydrogels in formof an inverse opal. The stimuli-sensitive inverse opal hydrogels (IOHs) were prepared using a sacrificial opal template of monodispersed silica particles. First, monodisperse silica particles were assembled with a hexagonally packed structure via vertical deposition onto glass slides. The obtained silica crystals, also named colloidal crystals (CCs), exhibit structural color. Subsequently, the CCs templates were embedded in polymer matrix with low-fouling properties. The polymer matrices were composed of oligo(ethylene glycol) methacrylate derivatives (OEGMAs) that render the hydrogels thermoresponsive. Finally, the silica particles were etched, to produce highly porous hydrogel replicas of the CC. Importantly, the inner structure and thus the ability for light diffraction of the IOHs formed was maintained. The IOH membrane was shown to have interconnected pores with a diameter as well as interconnections between the pores of several hundred nanometers. This enables not only the detection of small analytes, but also, the detection of even large analytes that can diffuse into the nanostructured IOH membrane. Various recognition unit – analyte model systems, such as benzoboroxole – 1,2-diols, biotin – avidin and mannose – concanavalin A, were studied by incorporating functional comonomers of benzoboroxole, biotin and mannose into the copolymers. The incorporated recognition units specifically bind to certain low and highmolar mass biomolecules, namely to certain saccharides, catechols, glycopolymers or proteins. Their specific binding strongly changes the overall hydrophilicity, thus modulating the swelling of the IOH matrices, and in consequence, drastically changes their internal periodicity. This swelling is amplified by the thermoresponsive properties of the polymer matrix. The shift of the interference band gap due to the specific molecular recognition is easily visible by the naked eye (up to 150 nm shifts). Moreover, preliminary trial were attempted to detect even larger entities. Therefore anti-bodies were immobilized on hydrogel platforms via polymer-analogous esterification. These platforms incorporate comonomers made of tri(ethylene glycol) methacrylate end-functionalized with a carboxylic acid. In these model systems, the bacteria analytes are too big to penetrate into the IOH membranes, but can only interact with their surfaces. The selected model bacteria, as Escherichia coli, show a specific affinity to anti-body-functionalized hydrogels. Surprisingly in the case functionalized IOHs, this study produced weak color shifts, possibly opening a path to detect directly living organism, which will need further investigations. N2 - Periodisch strukturierte, funktionelle responsive Hydrogele wurden in Form von inversen Opalen (IOH) aufgebaut und als Basiselement für Temperatur-, pH-, lösungsmittel-, 1,2-diol- oder protein-sensitive Sensorsysteme entwickelt. Dazu wurden aus biokompatiblen Bausteinen funktionelle photonische Kristalle aufgebaut, deren optische Bandlücke durch selektive Bindung eines Analyten moduliert wird, indem dieser einen Volumen-Phasenübergang induziert.Mittels solcher responsiver photonische Kristalle ist es möglich, Analyte ohne aufwendige Geräte durch Farbänderung einfach zu detektieren. Die entwickelten Systeme zeigen nicht nur eine hohe Empfindlichkeit gegenüber kleinen Biomolekülen, sondern auch gegenüber größeren Analyten wie z.B. Glycopolymeren und Proteinen, was bisher nicht bekannt war. Die stimuli-sensitiven inversen Opal Hydrogele (IOHs) wurden in mehreren Stufen hergestellt. Als erstes wurden dafür kolloidale Kristalle mit hexagonal gepackten Strukturen aus monodispersen SiO2-Partikeln auf Glasträgern auf ebaut (“Opal”). Die Opale mit charakteristischen Strukturfarben wurden anschließend in eine polymere Hydrogelmatrix eingebettet. Diese wurde aus Oligo(ethylenglycol)methacrylaten (OEGMAs) hergestellt, so dass die Hydrogele sowohl thermosensitives als auch “lowfouling” Verhalten zeigen. Im letzten Schritt wurden die SiO2-Partikel entfernt und so eine hochporöse Hydrogel-Replika der Opale erhalten unter Erhalt deren innerer Struktur und Strukturfarbe. Die miteinander verbunden Poren der IOHMembran besitzen einen Durchmesser von einigen hundert Nanometern. Dies ermöglichte nicht nur die Detektion von kleinen Analyten, sondern auch die Detektion von deutlich größeren, makromolekularen Analyten, die ebenfalls in die Nanostrukturen der IOH Membran diffundieren können. Modellsysteme bestanden immer aus einer Erkennungsgruppe und einem Analyten, beispielsweise aus Benzoboroxol – 1,2-Diol, Biotin – Avidin und Mannose – Lectin (Concanavalin A). Für dieseModellsysteme wurden OEGMAs mitMonomeren copolymerisiert, die mit Benzoboroxol, Biotin bzw.Mannose funktionalisiert waren. Die so im Polymer eingebauten Erkennungsgruppen binden spezifisch an bestimmte Biomoleküle unterschiedlicherMolmassen, wie z.B. niedermolekulare Saccharide oder Catechin, als auch hochmolekulare Glycopolymere oder Proteine. Der spezifische Bindungsvorgang moduliert die Gesamthydrophilie, so dass sich der Quellgrad der IOH-Matrix ändert. Dies wiederrumverändert die innere Periodizität und damit die Strukturfarbe. Dabei wird der Quelleffekt durch die Thermosensitivität der Hydrogele massiv verstärkt. Eine spezifischeMolekülanbindung lässt sich so optisch, z.T. sogar mit dem Auge, erkennen aufgrund der deutlichen Verschiebung der Strukturfarbe um bis zu 150 nm. Des Weiteren wurden auch erste Versuche zur Detektion von noch größeren Analyten unternommen. Dafür wurden Antiköper durch nachträgliche Modifizierung der Polymerseitenketten auf den Hydrogeloberflächen immobilisiert. Mit diesem Modellsystem konnten unterschiedliche Bakterienarten durch Antikörper spezifisch gebunden werden. Die verwendeten Bakterienarten sind zwar zu groß, um in die Membran des IOH Systems einzudringen, können jedoch mit der IOH-Oberfläche wechselwirken. Insbesondere dasModellsystem mit Escherichia coli zeigte eine starke, spezifische Affinität zu dem Antikörper-funktionalisierten IOH. Überraschenderweise zeigte sich bei den Versuchen in Gegenwart des Analyten eine kleine Farbänderung der funktionalisierten IOH. Damit eröffnet sich u.U. dieMöglichkeit, mit solchen responsiven photonischen Kristallen auch lebende Organismen spezifisch und einfach zu detektieren, was in weiterführenden Arbeiten zu klären sein wird. KW - inverse opal KW - hydrogel KW - responsive polymer KW - inverse Opale KW - Hydrogel KW - schaltbare Polymere Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98412 ER - TY - THES A1 - Hildebrand, Viet T1 - Twofold switchable block copolymers based on new polyzwitterions T1 - Neue Polyzwitterionbasierte Blockcopolymere mit „Schizophrenem Verhalten“ N2 - In complement to the well-established zwitterionic monomers 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate (“SPE”) and 3-((3-methacrylamidopropyl)dimethylammonio)propane-1-sulfonate (“SPP”), the closely related sulfobetaine monomers were synthesized and polymerized by reversible addition-fragmentation chain transfer (RAFT) polymerization, using a fluorophore labeled RAFT agent. The polyzwitterions of systematically varied molar mass were characterized with respect to their solubility in water, deuterated water, and aqueous salt solutions. These poly(sulfobetaine)s show thermoresponsive behavior in water, exhibiting upper critical solution temperatures (UCST). Phase transition temperatures depend notably on the molar mass and polymer concentration, and are much higher in D2O than in H2O. Also, the phase transition temperatures are effectively modulated by the addition of salts. The individual effects can be in parts correlated to the Hofmeister series for the anions studied. Still, they depend in a complex way on the concentration and the nature of the added electrolytes, on the one hand, and on the detailed structure of the zwitterionic side chain, on the other hand. For the polymers with the same zwitterionic side chain, it is found that methacrylamide-based poly(sulfobetaine)s exhibit higher UCST-type transition temperatures than their methacrylate analogs. The extension of the distance between polymerizable unit and zwitterionic groups from 2 to 3 methylene units decreases the UCST-type transition temperatures. Poly(sulfobetaine)s derived from aliphatic esters show higher UCST-type transition temperatures than their analogs featuring cyclic ammonium cations. The UCST-type transition temperatures increase markedly with spacer length separating the cationic and anionic moieties from 3 to 4 methylene units. Thus, apparently small variations of their chemical structure strongly affect the phase behavior of the polyzwitterions in specific aqueous environments. Water-soluble block copolymers were prepared from the zwitterionic monomers and the non-ionic monomer N-isopropylmethacrylamide (“NIPMAM”) by the RAFT polymerization. Such block copolymers with two hydrophilic blocks exhibit twofold thermoresponsive behavior in water. The poly(sulfobetaine) block shows an UCST, whereas the poly(NIPMAM) block exhibits a lower critical solution temperature (LCST). This constellation induces a structure inversion of the solvophobic aggregate, called “schizophrenic micelle”. Depending on the relative positions of the two different phase transitions, the block copolymer passes through a molecularly dissolved or an insoluble intermediate regime, which can be modulated by the polymer concentration or by the addition of salt. Whereas, at low temperature, the poly(sulfobetaine) block forms polar aggregates that are kept in solution by the poly(NIPMAM) block, at high temperature, the poly(NIPMAM) block forms hydrophobic aggregates that are kept in solution by the poly(sulfobetaine) block. Thus, aggregates can be prepared in water, which switch reversibly their “inside” to the “outside”, and vice versa. N2 - Diese Arbeit befasst sich mit der Synthese und Charakterisierung von doppelt thermisch-responsiven Blockcopolymeren mit einem polaren nicht-ionischen Block (der einen LCST-Übergang in wässriger Lösung induziert) und einem zwitterionischen Block (der einen UCST-Übergang aufweisen soll), der durch Salzzusatz über einen weiten Temperaturbereich modulierbar ist. Dafür wurden geeignete zwitterionische Polymer¬blöcke identifiziert und hergestellt, die ein derartiges Löslichkeitsprofil aufweisen. Da bislang nur relativ wenige Poly-sulfobetaine beschrieben sind und entsprechend das wässrige Phasenverhalten nur für einzelne ausgewählte Polymere bekannt ist, wurde ein Grundverständnis von chemischer Struktur und Phasen¬übergangs¬verhalten durch eine systematische Variation des Substitutionsmusters angestrebt. Die als geeignet erkannten Sulfobetain-Monomere wurden mit dem nicht-ionischen Monomer N-Isopropyl-methacrylamid („NIPMAM“) zu Blockcopolymeren von unterschiedlicher Größe und Blocklängen zusammengefügt. Die neuen Blockcopolymere wurden anschließend bezüglich der Lage der Phasenübergänge mit Trübheitsmessungen untersucht. Es wurden 2 Serien neuer zwitterionischer Monomere synthetisiert, deren Struktur den sehr gut untersuchten 3-((2-(methacryloyloxy)ethyl)dimethylammonio)propane-1-sulfonate („SPE“) und 3-((3-methacrylamidopropyl)dimethylammonio)propane-1-sulfonate („SPP“) ähnlich ist. Aus den Monomeren wurden fluoreszenz-markierte Homopolymere mit unterschiedlichen Molmassen mittels der Reversiblen Additions-Fragmentierungs Kettenübertragungs (RAFT) – Polymerisation unter Verwendung eines geeigneten RAFT Reagenzes synthetisiert. Die Poly¬sulfobetaine wurden bezüglich ihrer Löslichkeit in Wasser, in deuteriertem Wasser und in Salzlösungen untersucht. Ihr wässriges Phasenverhalten mit einem UCST-Übergang ist stark abhängig von ihrer Molmasse und von der Polymerkonzentration der untersuchten Lösung. Auffällig ist, dass die Phasenübergangstemperatur in D2O deutlich höher liegt als in H2O. Des Weiteren konnten die Löslichkeit und Phasen-übergangstemperatur durch Salzzusatz effektiv moduliert werden. Prinzipiell stellte sich bei den untersuchten Anionen heraus, dass das Einsalzen bzw. das Aussalzen der empirischen Hofmeister Serie folgt. Dabei hängen die individuellen Effekte sehr stark von der Konzentration und von der Art des Salzes, aber auch in nicht-trivialer Weise von der detaillierten zwitterionischen Struktur stark ab. Durch die systematische Variation der Monomerstruktur wurden interessante Tendenzen offenbar. Die Methacrylamid-basierte Polysulfobetaine besitzen eine höhere Phasenübergangstemperatur als ihre Methacrylat-basierten Analoga. Die Vergrößerung der Distanz zwischen Polymerrückrat und der zwitterionischen Gruppe von 2 auf 3 Methylengruppen führt zu einer Erniedrigung der Phasenübergangstemperatur. Polysulfobetaine mit aliphatischen Resten (Methyl-gruppen) am Ammonium-Ion haben eine höhere Phasenübergangstemperatur als ihre Analoga, in denen der Ammonium-Stickstoff Teil eines Heterozyklus ist. Als letzte Strukturvariable wurde die Distanz zwischen Kation und Anion von 3 auf 4 Methylengruppen vergrößert; diese Änderung führt zu einer massiven Erhöhung der Phasenübergangstemperatur. Die Polysulfobetaine wurden verwendet, um mit dem nicht-ionischen Monomer NIPMAM wasserlösliche Blockcopolymere mittels der RAFT Polymerisation herzustellen. Diese Blockcopolymere besitzen doppelt thermisch-responsives Verhalten (mit einem UCST- und einem LCST-Übergang). Die Besonderheit einer solchen Konstellation ist, dass eine Strukturinversion der solvophoben Aggregate induziert werden kann. Daher werden solche Blockcopolymer-Assoziate auch als „schizophrene Mizellen“ bezeichnet. Je nach der relativen Lage der beiden Phasenübergänge, die sich durch Polymerkonzentration oder durch Salzzusatz einstellen lässt, läuft die Strukturinversion über ein molekular gelöstes oder über ein unlösliches Zwischenstadium ab. Der Polysulfobetain-Block bildet bei niedriger Temperatur Aggregate, die durch den gelösten poly(NIPMAM)-Block in Lösung gehalten werden. Dahingegen bildet der poly(NIPMAM)-Block bei hoher Temperatur Aggregate, welche ihrerseits durch den gelösten Polysulfobetain-Block in Lösung gehalten werden. Somit werden „schizophrene“ Aggregate in Wasser erzeugt, die fähig sind, reversibel ihr „Inneres“ nach „Außen“ und umgekehrt zu schalten durch Nutzen eines einfachen thermischen Impulses. KW - switchable block copolymer KW - polyzwitterion KW - polysulfobetaine KW - thermoresponsive polymers KW - schizophrenic behavior KW - LCST and UCST KW - electrolyte sensitivity KW - zweifach schaltbare Blockcopolymere KW - Polyzwitterion KW - Polysulfobetaine KW - thermoresponsive Polymere KW - schizophrenes Verhalten KW - LCST und UCST KW - Elektrolytempfindlichkeit Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101372 ER - TY - THES A1 - Knoop, Mats Timothy T1 - Neue Polyacrylnitril-basierte, schmelzspinnbare Präkursoren für Carbonfasern N2 - Diese Arbeit zu Grunde liegenden Forschung zielte darauf ab, neue schmelzbare Acrylnitril-Copolymere zu entwickeln. Diese sollten im Anschluss über ein Schmelzspinnverfahren zur Chemiefaser geformt und im letzten Schritt zur Carbonfaser konvertiert werden. Zu diesem Zweck wurden zunächst orientierende Untersuchungen an unterschiedlichen Copolymeren des Acrylnitril aus Lösungspolymerisation durchgeführt. Die Untersuchungen zeigten, dass elektrostatische Wechselwirkungen besser als sterische Abschirmung dazu geeignet sind, Schmelzbarkeit unterhalb der Zersetzungstemperatur von Polyacrylnitril zu bewirken. Aus der Vielzahl untersuchter Copolymere stellten sich jene mit Methoxyethylacrylat (MEA) als am effektivsten heraus. Für diese Copolymere wurden sowohl die Copolymerisationsparameter bestimmt als auch die grundlegende Kinetik der Lösungspolymerisation untersucht. Die Copolymere mit MEA wurden über Schmelzspinnen zur Faser umgeformt und diese dann untersucht. Hierbei wurden auch Einflüsse verschiedener Parameter, wie z.B. die der Molmasse, auf die Fasereigenschaften und -herstellung untersucht. Zuletzt wurde ein Heterophasenpolymerisationsverfahren zur Herstellung von Copolymeren aus AN/MEA entwickelt; dadurch konnten die Materialeigenschaften weiter verbessert werden. Zur Unterdrückung der thermoplastischen Eigenschaften der Fasern wurde ein geeignetes Verfahren entwickelt und anschließend die Konversion zu Carbonfasern durchgeführt. N2 - The aim of this work was to develop new meltable acrylonitrile co-polymers. Those should be processed into a fiber via melt-spinning, and finally be converted into carbon fibers. Various co-polymers of acrylonitrile were synthesized by solution polymerization. The investigations showed that electrostatic interactions are more effective than steric shielding for achieving meltability of co-polymers of acrylonitrile. Out of the wide range of co-polymers prepared, those with the co-monomer methoxyethylacrylate were the most effective ones. For these co-polymers copolymerization parameters and basic kinetics were investigated. The co-polymers were processed into fibers via melt-spinning. The influence of various parameters such as molar mass on the process and the mechanical properties of the fibers was studied. Subsequently, a new emulsion polymerization process for the synthesis of the co-polymers was developed, resulting in further improved material properties. Finally a process for deactivation of thermoplasticity by chemical treatment was developed. T2 - Novel meltable polyacrylonitrile precursor for carbon fibres KW - schmelzbares PAN KW - PAN Emulsionspolymerisation KW - meltable PAN KW - Carbonfaserprecursor KW - carbon fibre KW - precursor Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-103972 ER - TY - THES A1 - Leiendecker, Mai-Thi T1 - Physikalische Hydrogele auf Polyurethan-Basis T1 - Physical hydrogels based on polyurethanes N2 - Physical hydrogels have gained recent attention as cell substrates, since viscoelasticity or stress relaxation is a powerful parameter in mechanotransduction, which has long been neglected. We designed multi-functional polyurethanes to form physical hydrogels via a unique tunable gelation mechanism. The anionic polyurethanes spontaneously form aggregates in water that are kept in a soluble state through electrostatic repulsion. Fast subsequent gelation can be triggered by charge shielding which allows the aggregation and network building to proceed. This can be induced by adding either acids or salts, resulting in acidic (pH 4-5) or pH-neutral hydrogels, respectively. Whereas conventional polyurethane-based hydrogels are commonly prepared from toxic isocyanate precursors, the physical hydrogelation mechanism described here does not involve chemically reactive species which is ideal for in situ applications in sensitive environments. Both stiffness and stress relaxation can be tuned independently over a broad range and the gels exhibit excellent stress recovery behavior. N2 - Physikalische Hydrogele gewinnen derzeit als Zellsubstrate zunehmend an Interesse, da Viskoelastizität oder Stressrelaxation ein bedeutender Parameter in der Mechanotransduktion ist, der bisher vernachlässigt wurde. In dieser Arbeit wurden multi-funktionelle Polyurethane entworfen, die über einen neuartigen Gelierungsmechanismus physikalische Hydrogele bilden. In Wasser bilden die anionischen Polyurethane spontan Aggregate, welche durch elektrostatische Abstoßung in Lösung gehalten werden. Eine schnelle Gelierung kann von hier aus durch Ladungsabschirmung erreicht werden, wodurch die Aggregation voranschreitet und ein Netzwerk ausgebildet wird. Dies kann durch die Zugabe von verschiedenen Säuren oder Salzen geschehen, sodass sowohl saure (pH 4 - 5) als auch pH-neutrale Hydrogele erhalten werden können. Während konventionelle Hydrogele auf Polyurethan-Basis in der Regel durch toxische isocyanat-haltige Präpolymere hergestellt werden, eignet sich der hier beschriebene physikalische Gelierungsmechanismus für in situ Anwendungen in sensitiven Umgebungen. Sowohl Härte als auch Stressrelaxation der Hydrogele können unabhängig voneinander über einen breiten Bereich eingestellt werden. Darüberhinaus zeichnen sich die Hydrogele durch exzellente Stressregeneration aus. KW - Polyurethane KW - Hydrogele KW - physikalische Hydrogele KW - Kolloidchemie KW - Viskoelastizität KW - Stressrelaxation KW - Stressrelaxierung KW - Bulkgele KW - Mikrogele KW - Mechanotransduktion KW - polyurethanes KW - hydrogels KW - physical hydrogels KW - colloidal chemistry KW - viscoelasticity KW - stress-relaxation KW - stress relaxation KW - bulk gels KW - microgels KW - mechanotransduction Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-103917 ER - TY - THES A1 - Fandrich, Artur T1 - Untersuchung des Verhaltens von thermoresponsiven Polymeren auf Elektroden in Interaktion mit biomolekularen Systemen T1 - Investigation of the behavior of thermoresponsive polymers on electrodes in interaction with biomolecular systems N2 - Diese Arbeit befasst sich mit der Herstellung und Charakterisierung von thermoresponsiven Filmen auf Goldelektroden durch Fixierung eines bereits synthetisierten thermoresponsiven Polymers. Als Basis für die Entwicklung der responsiven Grenzfläche dienten drei unterschiedliche Copolymere (Polymere I, II und III) aus der Gruppe der thermisch schaltbaren Poly(oligo(ethylenglykol)methacrylate). Die turbidimetrischen Messungen der Copolymere in Lösungen haben gezeigt, dass der Trübungspunkt vom pH-Wert, der Gegenwart von Salzen sowie von der Ionenstärke der Lösung abhängig ist. Nach der Charakterisierung der Polymere in Lösung wurden Experimente der kovalenten Kopplung der Polymere I bis III an die Oberfläche der Gold-Elektroden durchgeführt. Während bei Polymeren I und II die Ankopplung auf einer Amidverbrückung basierte, wurde bei Polymer III als alternative Methode zur Immobilisierung eine photoinduzierte Anbindung unter gleichzeitiger Vernetzung gewählt. Der Nachweis der erfolgreichen Ankopplung erfolgte bei allen Polymeren elektrochemisch mittels Cyclovoltammetrie und Impedanzspektroskopie in K3/4[Fe(CN)6]-Lösungen. Wie die Ellipsometrie-Messungen zeigten, waren die erhaltenen Polymer-Filme unterschiedlich dick. Die Ankopplung über Amidverbrückung lieferte dünne Filme (10 – 15 nm), während der photovernetzte Film deutlich dicker war (70-80 nm) und die darunter liegende Oberfläche relativ gut isolierte. Elektrochemische Temperaturexperimente an Polymer-modifizierten Oberflächen in Lösungen in Gegenwart von K3/4[Fe(CN)6] zeigten, dass auch die immobilisierten Polymere I bis III responsives Temperaturverhalten zeigen. Bei Elektroden mit den immobilisierten Polymeren I und II ist der Temperaturverlauf der Parameterwerte diskontinuierlich – ab einem kritischen Punkt (37 °C für Polymer I und 45 °C für Polymer II) wird zunächst langsame Zunahme der Peakströme wird deutlich schneller. Das Temperaturverhalten von Polymer III ist dagegen bis 50 °C kontinuierlich, der Peakstrom sinkt hier durchgehend. Weiterhin wurde mit den auf Polymeren II und III basierten Elektroden deren Anwendung als responsive Matrix für Bioerkennungsreaktionen untersucht. Es wurde die Ankopplung von kleinen Biorezeptoren, TAG-Peptiden, an Polymer II- und Polymer III-modifizierten Elektroden durchgeführt. Das hydrophile FLAG-TAG-Peptid verändert das Temperaturverhalten des Polymer II-Films unwesentlich, da es die Hydrophilie des Netzwerkes nicht beeinflusst. Weiterhin wurde der Effekt der Ankopplung der ANTI-FLAG-TAG-Antikörper an FLAG-TAG-modifizierte Polymer II-Filme untersucht. Es konnte gezeigt werden, dass die Antikörper spezifisch an FLAG-TAG-modifiziertes Polymer II binden. Es wurde keine unspezifische Anbindung von ANTI-FLAG-TAG an Polymer II beobachtet. Die Temperaturexperimente haben gezeigt, dass die thermische Restrukturierung des Polymer II-FLAG-TAG-Filmes auch nach der Antikörper-Ankopplung noch stattfindet. Der Einfluss der ANTI-FLAG-TAG-Ankopplung ist gering, da der Unterschied in der Hydrophilie zwischen Polymer II und FLAG-TAG bzw. ANTI-FLAG-TAG zu gering ist. Für die Untersuchungen mit Polymer III-Elektroden wurde neben dem hydrophilen FLAG-TAG-Peptid das deutlich hydrophobere HA-TAG-Peptid ausgewählt. Wie im Falle der Polymer II Elektrode beeinflusst das gekoppelte FLAG-TAG-Peptid das Temperaturverhalten des Polymer III-Netzwerkes nur geringfügig. Die gemessenen Stromwerte sind geringer als bei der Polymer III-Elektrode. Das Temperaturverhalten der FLAG-TAG-Elektrode ähnelt dem der reinen Polymer III-Elektrode – die Stromwerte sinken kontinuierlich bis die Temperatur von ca. 40 °C erreicht ist, bei der ein Plateau beobachtet wird. Offensichtlich verändert FLAG-TAG auch in diesem Fall nicht wesentlich die Hydrophilie des Polymer III-Netzwerkes. Das an Polymer III-Elektroden gekoppelte hydrophobe HA-TAG-Peptid beeinflusst dagegen im starken Maße den Quellzustand des Netzwerkes. Die Ströme für die HA-TAG-Elektroden sind deutlich geringer als die für die FLAG-TAG-Polymer III-Elektroden, was auf geringeren Wassergehalt und dickeren Film zurückzuführen ist. Bereits ab 30 °C erfolgt der Anstieg von Stromwerten, der bei Polymer III- bzw. bei Polymer III-FLAG-TAG-Elektroden nicht beobachtet werden kann. Das gekoppelte hydrophobe HA-TAG-Peptid verdrängt Wasser aus dem Polymer III-Netzwerk, was in der Stauchung des Films bereits bei Raumtemperatur resultiert. Dies führt dazu, dass der Film im Laufe des Temperaturanstieges kaum noch komprimiert. Die Stromwerte steigen in diesem Fall entsprechend des Anstiegs der temperaturabhängigen Diffusion des Redoxpaares. Diese Untersuchungen zeigen, dass das HA-TAG-Peptid als Ankermolekül deutlich besser für eine potentielle Verwendung der Polymer III-Filme für sensorische Zwecke geeignet ist, da es sich deutlich in der Hydrophilie von Polymer III unterscheidet. N2 - This work describes the immobilization and characterization of thermoresponsive polymer films on gold electrodes. The immobilized films were thermoresponsive copolymers (polymers I, II and III) from the group of poly(oligo(ethylene glycol)methacrylates). After the synthesis, the aqueous solutions of copolymers in presence of (buffering) salts were investigated. The turbidimetry measurements revealed that the responsive behaviour of the polymers strongly depends on the pH and the ionic strength of the solution. After the studies in the solution, experiments on the covalent immobilization of the polymers on gold electrodes were performed. The fixation strategy for the polymers I and II was based on the amide coupling. The polymer III was immobilized by irradiation with UV-light. The successful immobilization was proved by cyclic voltammetry and electrochemical impedance spectroscopy measurements in solutions containing K3/4[Fe(CN)6]. The ellipsometry measurements showed that the obtained films were of different thickness. Polymer I and II films obtained from the amide coupling were thinner (10 – 15 nm) compared to photolytically immobilized polymer III films (70-80 nm). Electrochemical temperature experiments on polymer modified electrodes in K3/4[Fe(CN)6] solutions showed that the polymer I, II and III retain the responsivity after the fixation on the electrode surface. The thermoresponsive behaviour of the thin polymer I and II films is discontinuous – after the achieving of the critical temperature point (37 °C for polymer I and 45 °C for polymer II) the increase of the peak currents changes significantly and becomes faster hinting at the restructuration process. In contrast to this the temperature behaviour of the polymer III films is continuous in the temperature range between 25 and 50 °C. The peak currents for the polymer III electrodes decrease with increasing temperature. Furthermore, the application of polymer II and polymer III surfaces as a responsive platform for bio-recognition reactions was investigated. For this purpose, the coupling of small bioreceptors (tag peptides) on polymer films was performed. It was found that the hydrophilic FLAG-TAG peptide does not significantly alter the temperature behaviour of the polymer II film because it does not affect the hydrophilicity of the network. Additionally, the effect of coupling the ANTI-FLAG-TAG antibodies to FLAG-TAG-modified polymer II films was investigated. It was shown that the antibodies specifically bind to FLAG-TAG-modified polymer II. No nonspecific binding of ANTI-FLAG-TAG to polymer II was observed. The temperature experiments have shown that the thermal restructuring of the polymer II-FLAG-TAG film still takes place after antibody coupling. The influence of ANTI-FLAG-TAG coupling is low, since the difference in the hydrophilicity between polymer II and FLAG-TAG or ANTI-FLAG-TAG is too low. In addition to the hydrophilic FLAG-TAG peptide, the significantly more hydrophobic HA-TAG peptide was selected for the investigations with polymer III electrodes. As in the case of the polymer II electrode, the coupled FLAG-TAG peptide only slightly affects the temperature behaviour of the polymer III network. The measured current values are lower than for the polymer III electrode. The temperature behaviour of the FLAG-TAG electrode resembles that of the pure polymer III electrode - the current values sink continuously until the temperature of approx. 40 ° C is reached, at which a plateau is observed. Obviously, FLAG-TAG does not significantly alter the hydrophilicity of the polymer III network even in this case. The hydrophobic HA-TAG peptide coupled to polymer III electrodes, on the other hand, strongly influences the swelling state of the network. The currents for the HA-TAG electrodes are significantly lower than those for the FLAG-TAG polymer III electrodes, which is due to lower water content and thicker film. The increase in current values occurs at temperatures as low as 30 ° C, which cannot be observed with polymer III or with polymer III FLAG TAG electrodes. The coupled hydrophobic HA-TAG peptide displaces water from the polymer III network, resulting in the compression of the film even at room temperature. As a result, the film hardly compresses during the temperature rise. The current values increase in this case according to the increase in the temperature-dependent diffusion of the redox pair. These studies show that the HA-TAG peptide as an anchoring molecule is much better suited for a potential use of the polymer III films for sensory purposes since it is clearly different in the hydrophilicity of polymer III. KW - thermoresponsiv KW - Polymer KW - Biosensor KW - Cyclovoltammetrie KW - Elektrochemie KW - thermoresponsive KW - polymer KW - biosensor KW - cyclic voltammetry KW - electrochemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396551 ER - TY - THES A1 - Vacogne, Charlotte D. T1 - New synthetic routes towards well-defined polypeptides, morphologies and hydrogels T1 - Neue Syntheserouten zu wohldefinierten Polypeptiden, Morphologien und Hydrogelen N2 - Proteins are natural polypeptides produced by cells; they can be found in both animals and plants, and possess a variety of functions. One of these functions is to provide structural support to the surrounding cells and tissues. For example, collagen (which is found in skin, cartilage, tendons and bones) and keratin (which is found in hair and nails) are structural proteins. When a tissue is damaged, however, the supporting matrix formed by structural proteins cannot always spontaneously regenerate. Tailor-made synthetic polypeptides can be used to help heal and restore tissue formation. Synthetic polypeptides are typically synthesized by the so-called ring opening polymerization (ROP) of α-amino acid N-carboxyanhydrides (NCA). Such synthetic polypeptides are generally non-sequence-controlled and thus less complex than proteins. As such, synthetic polypeptides are rarely as efficient as proteins in their ability to self-assemble and form hierarchical or structural supramolecular assemblies in water, and thus, often require rational designing. In this doctoral work, two types of amino acids, γ-benzyl-L/D-glutamate (BLG / BDG) and allylglycine (AG), were selected to synthesize a series of (co)polypeptides of different compositions and molar masses. A new and versatile synthetic route to prepare polypeptides was developed, and its mechanism and kinetics were investigated. The polypeptide properties were thoroughly studied and new materials were developed from them. In particular, these polypeptides were able to aggregate (or self-assemble) in solution into microscopic fibres, very similar to those formed by collagen. By doing so, they formed robust physical networks and organogels which could be processed into high water-content, pH-responsive hydrogels. Particles with highly regular and chiral spiral morphologies were also obtained by emulsifying these polypeptides. Such polypeptides and the materials derived from them are, therefore, promising candidates for biomedical applications. N2 - Proteine, auch Polypeptide genannt, sind große Biomoleküle, die aus kleineren Aminosäuren bestehen. Diese sind zu langen Ketten miteinander verbunden, wie die Perlen auf einer Perlenkette. Sie werden in Zellen produziert, können in Tieren und Pflanzen gefunden werden und haben vielfältige Funktionen. Eine dieser Funktionen ist es, die umgebenen Zellen und Gewebe wie ein Gerüst zu stützen. Kollagen (welches in Haut, Knorpel, Sehnen und Knochen zu finden ist) und Keratin (welches in Haaren und Nägeln vorkommt) gehören zu diesen Strukturproteinen. Jedoch wenn ein Gewebe beschädigt ist, beispielsweise als Folge eines Unfalls, kann sich das Grundgerüst aus diesen Strukturproteinen manchmal nicht mehr selbst regenerieren. Maßgefertigte synthetische Polypeptide, können dafür verwendet werden, die Heilung und Wiederherstellung des Gewebes zu Unterstützen. Diese Polypeptide werden mit einer Reihe an chemischen Reaktionen synthetisiert, welche hauptsächlich darauf abzielen Aminosäuren miteinander zu verknüpfen. Synthetische Polypeptide sind weniger Komplex als die von Zellen hergestellten, natürlichen Polypeptide (Proteine). Während in den natürlichen Polypeptiden die Aminosäuren in einer von der DNA definierten Reihenfolge, welche als Sequenz bezeichnet wird, angeordnet sind, sind sie in synthetischen Polypeptiden zumeist zufällig verteilt. Die Konsequenz daraus ist, dass synthetische Polypeptide nicht immer so Leistungsfähig sind wie natürliche Proteine und ein durchdachtes Design benötigen. Zwei Aminosäuren wurden in dieser Dissertation sorgfältig ausgewählt und verwendet um eine Serie an Polypeptiden mit unterschiedlicher Zusammensetzung und Länge zu synthetisieren. Ein neuer und vielseitiger Syntheseweg wurde ebenfalls entwickelt und der zugrundeliegende Mechanismus untersucht. Die Polypeptide wurden gründlich analysiert und neue Materialien wurden aus ihnen entwickelt. In Lösung gebracht formten diese Fasern, ähnlich denen von Kollagen, welche sich wiederum zu robusten Netzwerken anordneten. Aus diesen Netzwerken ließen sich Hydrogele herstellen, welche in der Lage waren große Mengen an Wasser aufzunehmen. Diese Hydrogele wiederum stellen vielversprechende Kandidaten für biomedizinische Anwendungen dar. KW - polymer KW - chemistry KW - biomaterial KW - polymerization KW - kinetics KW - polypeptide KW - colloid KW - gelation KW - hydrogel KW - organogel KW - secondary structure KW - physical KW - NCA KW - N-carboxyanhydride KW - Polymer KW - Chemie KW - Biomaterial KW - Polymerisation KW - Kinetik KW - Polypeptid KW - Kolloid KW - Gelieren KW - Hydrogel KW - Organogel KW - Sekundärstruktur KW - physikalisch KW - NCA KW - N-carboxyanhydrid Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396366 ER - TY - THES A1 - Prinz, Julia T1 - DNA origami substrates as a versatile tool for surface-enhanced Raman scattering (SERS) T1 - DNA Origami-Substrate als ein vielseitiges Werkzeug für die oberflächenverstärkte Raman-Streuung (SERS) N2 - Surface-enhanced Raman scattering (SERS) is a promising tool to obtain rich chemical information about analytes at trace levels. However, in order to perform selective experiments on individual molecules, two fundamental requirements have to be fulfilled. On the one hand, areas with high local field enhancement, so-called “hot spots”, have to be created by positioning the supporting metal surfaces in close proximity to each other. In most cases hot spots are formed in the gap between adjacent metal nanoparticles (NPs). On the other hand, the analyte has to be positioned directly in the hot spot in order to profit from the highest signal amplification. The use of DNA origami substrates provides both, the arrangement of AuNPs with nm precision as well as the ability to bind analyte molecules at predefined positions. Consequently, the present cumulative doctoral thesis aims at the development of a novel SERS substrate based on a DNA origami template. To this end, two DNA-functionalized gold nanoparticles (AuNPs) are attached to one DNA origami substrate resulting in the formation of a AuNP dimer and thus in a hot spot within the corresponding gap. The obtained structures are characterized by correlated atomic force microscopy (AFM) and SERS imaging which allows for the combination of structural and chemical information. Initially, the proof-of principle is presented which demonstrates the potential of the novel approach. It is shown that the Raman signal of 15 nm AuNPs coated with dye-modified DNA (dye: carboxytetramethylrhodamine (TAMRA)) is significantly higher for AuNP dimers arranged on a DNA origami platform in comparison to single AuNPs. Furthermore, by attaching single TAMRA molecules in the hot spot between two 5 nm AuNPs and optimizing the size of the AuNPs by electroless gold deposition, SERS experiments at the few-molecule level are presented. The initially used DNA origami-AuNPs design is further optimized in many respects. On the one hand, larger AuNPs up to a diameter of 60 nm are used which are additionally treated with a silver enhancement solution to obtain Au-Ag-core-shell NPs. On the other hand, the arrangement of both AuNPs is altered to improve the position of the dye molecule within the hot spot as well as to decrease the gap size between the two particles. With the optimized design the detection of single dye molecules (TAMRA and cyanine 3 (Cy3)) by means of SERS is demonstrated. Quantitatively, enhancement factors up to 10^10 are estimated which is sufficiently high to detect single dye molecules. In the second part, the influence of graphene as an additional component of the SERS substrate is investigated. Graphene is a two-dimensional material with an outstanding combination of electronical, mechanical and optical properties. Here, it is demonstrated that single layer graphene (SLG) replicates the shape of underlying non-modified DNA origami substrates very well, which enables the monitoring of structural alterations by AFM imaging. In this way, it is shown that graphene encapsulation significantly increases the structural stability of bare DNA origami substrates towards mechanical force and prolonged exposure to deionized water. Furthermore, SLG is used to cover DNA origami substrates which are functionalized with a 40 nm AuNP dimer. In this way, a novel kind of hybrid material is created which exhibits several advantages compared to the analogue non-covered SERS substrates. First, the fluorescence background of dye molecules that are located in between the AuNP surface and SLG is efficiently reduced. Second, the photobleaching rate of the incorporated dye molecules is decreased up to one order of magnitude. Third, due to the increased photostability of the investigated dye molecules, the performance of polarization-dependent series measurements on individual structures is enabled. This in turn reveals extensive information about the dye molecules in the hot spot as well as about the strain induced within the graphene lattice. Although SLG can significantly influence the SERS substrate in the aforementioned ways, all those effects are strongly related to the extent of contact with the underlying AuNP dimer. N2 - Desoxyribonukleinsäure (engl. deoxyribonucleic acid (DNA)) ist nicht nur Träger der Erbinformation, sondern wird auch seit den frühen 80er Jahren als Gerüstmaterial in der Nanotechnologie verwendet. Im Jahr 2006 wurde die bis dato entwickelte DNA-Nanotechnologie durch die Erfindung der sogenannten DNA Origami-Technik weiter revolutioniert. Diese erlaubt die Konstruktion vielfältiger zwei- und dreidimensionaler Strukturen durch gezielte DNA-Selbstassemblierung. Basierend auf der grundlegenden Watson-Crick Basenpaarung innerhalb eines DNA-Doppelstrangs können die gewünschten Zielstrukturen dabei mit hoher Genauigkeit vorhergesagt werden. Neben der Entwicklung vielfältiger DNA-Konstrukte eignen sich DNA Origami-Substrate zudem hervorragend zur Bindung funktionaler Einheiten mit der Präzision im Bereich von Nanometern. Somit lassen sich beispielsweise Goldnanopartikel (AuNPs) präzise anordnen. Dies ist von höchstem Interesse im Zusammenhang mit der oberflächenverstärkten Ramanstreuung (engl. surface-enhanced Raman scattering (SERS)). SERS basiert darauf, die naturgemäß schwache Ramanstreuung eines Analyten um mehrere Größenordnungen zu verstärken, indem der Analyt nahe einer Metalloberfläche positioniert wird. Die Verstärkung der Ramanstreuung beruht hierbei hauptsächlich auf der Wechselwirkung des Analyten mit dem elektromagnetischen Feld der Metalloberfläche und kann im Zwischenraum zweier benachbarter Metallstrukturen besonders stark ausgeprägt sein. Die vorliegende kumulative Dissertation beschäftigt sich mit der Entwicklung einer DNA Origami-basierten Sensoroberfläche für die Anwendung von SERS-Experimenten. Hierbei werden jeweils zwei AuNPs in gezieltem Abstand an ein DNA Origami-Substrat gebunden und das verstärkte Ramansignal eines Analyten im Zwischenraum des AuNP-Dimers detektiert. Zunächst wird das allgemeine Prinzip in Form eines Wirksamkeitsnachweises vorgestellt, in welchem der Farbstoff Carboxytetramethylrhodamin (TAMRA) als Analyt verwendet wird. Die darauf aufbauenden Experimente zielen auf eine Verringerung der Nachweisgrenze bis hin zur Einzelmoleküldetektion ab. Im Zuge dessen werden vielseitige Optimierungsschritte durchgeführt, die die Größe, die Anordnung sowie die Ummantelung der AuNPs mit einer dünnen Silberschicht betreffen. Es wird gezeigt, dass durch die Optimierung aller Parameter die Detektion einzelner TAMRA- und Cyanin 3 (Cy3)-Moleküle mittels SERS möglich ist. Weiterhin wird Graphen, ein erst im Jahr 2004 entdecktes Material bestehend aus einer einzigen Schicht Kohlenstoffatome, als weiterer Bestandteil der untersuchten Nanostrukturen eingeführt. Graphen zeichnet sich durch eine bislang einzigartige Kombination aus optischen, elektronischen und mechanischen Eigenschaften aus und hat sich daher innerhalb kürzester Zeit zu einem vielfältigen Forschungsschwerpunkt entwickelt. In der vorliegenden Dissertation wird zunächst die erhöhte strukturelle Stabilität von Graphen bedeckten DNA Origami-Substraten im Hinblick auf mechanische Beanspruchung sowie auf die Inkubation in deionisiertem Wasser demonstriert. In weiterführenden Betrachtungen werden auch DNA Origami-Substrate, die mit AuNP-Dimeren funktionalisiert sind, mit Graphen bedeckt, und somit eine neuartige Hybridstruktur erzeugt. Es wird gezeigt, dass Graphen den Fluoreszenzuntergrund der untersuchten Farbstoffmoleküle deutlich reduziert und zusätzlich deren Photostabilität gegenüber der eintreffenden Laserstrahlung effektiv verbessert. KW - DNA origami KW - surface-enhanced Raman scattering KW - DNA nanostructures KW - graphene KW - single-molecule detection KW - DNA Origami KW - oberflächenverstärkte Raman-Streuung KW - DNA Nanostrukturen KW - Graphen KW - Einzelmoleküldetektion Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-104089 ER - TY - THES A1 - Pampel, Jonas T1 - Ionothermal carbon materials T1 - Ionothermale Kohlenstoffmaterialien BT - advanced synthesis and electrochemical applications BT - erweiterte Synthese und elektrochemische Anwendungen N2 - Alternative concepts for energy storage and conversion have to be developed, optimized and employed to fulfill the dream of a fossil-independent energy economy. Porous carbon materials play a major role in many energy-related devices. Among different characteristics, distinct porosity features, e.g., specific surface area (SSA), total pore volume (TPV), and the pore size distribution (PSD), are important to maximize the performance in the final device. In order to approach the aim to synthesize carbon materials with tailor-made porosity in a sustainable fashion, the present thesis focused on biomass-derived precursors employing and developing the ionothermal carbonization. During the ionothermal carbonization, a salt melt simultaneously serves as solvent and porogen. Typically, eutectic mixtures containing zinc chloride are employed as salt phase. The first topic of the present thesis addressed the possibility to precisely tailor the porosity of ionothermal carbon materials by an experimentally simple variation of the molar composition of the binary salt mixture. The developed pore tuning tool allowed the synthesis of glucose derived carbon materials with predictable SSAs in the range of ~ 900 to ~ 2100 m2 g-1. Moreover, the nucleobase adenine was employed as precursor introducing nitrogen functionalities in the final material. Thereby, the chemical properties of the carbon materials are varied leading to new application fields. Nitrogen doped carbons (NDCs) are able to catalyze the oxygen reduction reaction (ORR) which takes place on the cathodic site of a fuel cell. The herein developed porosity tailoring allowed the synthesis of adenine derived NDCs with outstanding SSAs of up to 2900 m2 g-1 and very large TPV of 5.19 cm3 g-1. Furthermore, the influence of the porosity on the ORR could be directly investigated enabling the precise optimization of the porosity characteristics of NDCs for this application. The second topic addressed the development of a new method to investigate the not-yet unraveled mechanism of the oxygen reduction reaction using a rotating disc electrode setup. The focus was put on noble-metal free catalysts. The results showed that the reaction pathway of the investigated catalysts is pH-dependent indicating different active species at different pH-values. The third topic addressed the expansion of the used salts for the ionothermal approach towards hydrated calcium and magnesium chloride. It was shown that hydrated salt phases allowed the introduction of a secondary templating effect which was connected to the coexistence of liquid and solid salt phases. The method enabled the synthesis of fibrous NDCs with SSAs of up to 2780 m2 g-1 and very large TPV of 3.86 cm3 g-1. Moreover, the concept of active site implementation by a facile low-temperature metalation employing the obtained NDCs as solid ligands could be shown for the first time in the context of ORR. Overall, the thesis may pave the way towards highly porous carbon with tailor-made porosity materials prepared by an inexpensive and sustainable pathway, which can be applied in energy related field thereby supporting the needed expansion of the renewable energy sector. N2 - Alternative Konzepte für Energiespeicherung und –umwandlung müssen entwickelt, optimiert und praktisch angewendet werden, um den Traum einer erdölunabhängigen Energiewirtschaft zu realisieren. Poröse Kohlenstoffmaterialien spielen eine bedeutende Rolle in vielen energierelevanten Anwendungen. Speziell die porösen Eigenschaften des Kohlenstoffs, wie die spezifische Oberfläche (engl. specific surface area: SSA), das totale Porenvolumen (engl. total pore volume: TPV) und die Porengrößenverteilung, sind von großer Bedeutung für eine Maximierung der Leistung in der Endanwendung. Die vorliegende Arbeit konzentrierte sich auf den Einsatz und die Weiterentwicklung der ionothermalen Karbonisierung ausgehend von biomassebasierten Präkursoren, um eine nachhaltige Synthese hochporöser Kohlenstoffe mit einstellbarer Porosität zu ermöglichen. In der ionothermalen Synthese fungieren Salzschmelzen simultan als Lösungsmittel und Porogen während der Karbonisierung. Als Salzphase werden hierbei häufig eutektische Zinkchloridhaltige binäre Salzmischungen verwendet. In der vorliegenden Arbeit wurde im ersten Schritt die Variation der molaren Zusammensetzung der binären Salzphase als neue Methode eingeführt, um eine kontinuierliche Veränderung der Porosität des synthetisierten Kohlenstoffs zu bewirken. Diese Methode erlaubte die Synthese von Glukose-basierten Kohlenstoffen mit einstellbarer SSA zwischen ~ 900 und ~ 2100 m2 g-1. Des Weiteren wurde die Nukleinbase Adenin als Präkursor verwendet, wodurch eine Stickstoffdotierung des finalen Kohlenstoffmaterials erreicht wurde. Die damit einhergehende Veränderung der chemischen Eigenschaften des Materials führt zu neuen Anwendungsbereichen. Stickstoffdotierte Kohlen (engl. nitrogen doped carbons: NDCs) können beispielsweise die Sauerstoffreduktion katalysieren, welche auf der Kathodenseite der Brennstoffzelle abläuft. Das entwickelte Verfahren zur Einstellung der Porosität erlaubte einerseits die Synthese von Adenin-basierten NDCs mit beeindruckenden SSAs von bis zu 2900 m2 g-1 und extrem hohen TPVs von bis zu 5,19 cm3 g-1. Andererseits konnte der Einfluss der Porosität auf die Sauerstoffreduktion direkt untersucht und infolge dessen die Porosität der NDCs für diese Anwendung optimiert werden. Im zweiten Schritt wurde ein neues Verfahren entwickelt, um mittels der rotierenden Scheibenelektrode den noch nicht geklärten Mechanismus der Sauerstoffreduktion zu untersuchen, vor allem in Bezug auf edelmetallfreie Katalysatoren. Die Ergebnisse zeigten, dass der Reaktionsverlauf der Sauerstoffreduktion pH-Wert abhängig ist. Diese deutet auf verschiedene aktive Spezies in Abhängigkeit des pH-Werts hin. Im dritten Schritt wurde der gezielte Einsatz von hydrierten Salzen (Magnesium- und Calciumchlorid) als Salzphase für die ionothermale Synthese untersucht. Es konnte gezeigt werden, dass Hydrate einen sekundären Templatierungseffekt erlauben, was anhand der Koexistenz von flüssigen und festen Salzphasen erklärt werden konnte. Hierdurch konnten faserartige NDC-Materialien mit SSAs von bis zu 2780 m2 g-1 und TPVs von bis zu 3,86 cm3 g-1 synthetisiert werden. Des Weiteren wurde anhand dieser NDC-Materialien erfolgreich gezeigt, dass es möglich ist sauerstoffreduktionsaktive Spezies durch einfache Metallierung mit Eisenionen bei niedrigen Temperaturen einzuführen. Zusammenfassend konnte die vorliegende Arbeit die kostengünstige und nachhaltige Synthese hochporöser Materialien mit einstellbarer Porosität zeigen, welche in energierelevanten Bereichen eingesetzt werden können. Hierdurch kann die notwendige Erweiterung des Sektors der erneuerbaren Energien unterstützt werden. KW - porous materials KW - nitrogen doped carbons KW - ORR KW - oxygen reduction reaction KW - electrocatalysis KW - poröse Materialien KW - stickstoffdotierte Kohlenstoffe KW - ORR KW - Sauerstoff Reduktion KW - Elektrokatalyse KW - ionothermal synthesis KW - ionothermale Synthese Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101323 ER - TY - THES A1 - Steeples, Elliot T1 - Amino acid-derived imidazolium salts: platform molecules for N-Heterocyclic carbene metal complexes and organosilica materials T1 - Imidazolium-Salze aus Aminosäure: Bausteine für N-Heterozyklische-Carben Metallkomplexe und Organosilicamaterialien N2 - In the interest of producing functional catalysts from sustainable building-blocks, 1, 3-dicarboxylate imidazolium salts derived from amino acids were successfully modified to be suitable as N-Heterocyclic carbene (NHC) ligands within metal complexes. Complexes of Ag(I), Pd(II), and Ir(I) were successfully produced using known procedures using ligands derived from glycine, alanine, β-alanine and phenylalanine. The complexes were characterized in solid state using X-Ray crystallography, which allowed for the steric and electronic comparison of these ligands to well-known NHC ligands within analogous metal complexes. The palladium complexes were tested as catalysts for aqueous-phase Suzuki-Miyaura cross-coupling. Water-solubility could be induced via ester hydrolysis of the N-bound groups in the presence of base. The mono-NHC–Pd complexes were seen to be highly active in the coupling of aryl bromides with phenylboronic acid; the active catalyst of which was determined to be mostly Pd(0) nanoparticles. Kinetic studies determined that reaction proceeds quickly in the coupling of bromoacetophenone, for both pre-hydrolyzed and in-situ hydrolysis catalyst dissolution. The catalyst could also be recycled for an extra run by simply re-using the aqueous layer. The imidazolium salts were also used to produce organosilica hybrid materials. This was attempted via two methods: by post-grafting onto a commercial organosilica, and co-condensation of the corresponding organosilane. The co-condensation technique harbours potential for the production of solid-support catalysts. N2 - Um Katalysatoren aus nachhaltigen Chemikalien herzustellen, wurden 1,3-Dicarbonsäure-Imidazolium-Salze, welche aus Aminosäuren synthetisiert wurden als N-heterozyklische-Carben-Liganden (NHC) in Metallkomplexen modifiziert. Liganden aus Glycin, Alanin, β-Alanin und Phenylalanin wurden wiederum genutzt, um Metallkomplexe aus Silber(I), Palladium(II) und Iridium(I) darzustellen. Alle Komplexverbindungen wurden mit Röntgenkristallographie charakterisiert. Die Palladiumkomplexe wurden als Katalysatoren in der Suzuki-Miyaura Reaktion eingesetzt. Durch zusätzliche Hydrolyse der Ester-Gruppen konnte eine gute Wasserlöslichkeit erreicht werden. Die hohe Aktivität der Mono-NHC–Palladium-Komplexe konnte bei der Kupplung von Arylbromiden mit Phenylboronsäuren aufgezeigt werden. Die aktive Spezies wurde hauptsächlich Pd(0) Nanopartikeln zugeschrieben. Nach erfolgreichem Recycling konnte der Katalysator noch einmal wiederverwendet werden. Die Imidazolium-Salze wurden ebenfalls herangezogen, um Organosilicamaterialien zu synthetisieren. Die Herstellung wurde durch zwei Methoden erreicht. Zum einen durch nachträgliches Aufbringen auf kommerzielle Siliziummaterialien, sowie durch Co-Kondensation auf das entsprechende Organosilan. Diese Co-Kondensation birgt Potential zur Herstellung von festen Trägerkatalysatoren. KW - synthesis KW - Synthese KW - sustainable chemistry KW - nachhaltige Chemie KW - organometallics KW - Metallorganischen KW - water KW - Wasser Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-101861 ER - TY - THES A1 - Ledendecker, Marc T1 - En route towards advanced catalyst materials for the electrocatalytic water splitting reaction T1 - Innovative Katalysatormaterialien für die elektrokatalytische Wasserspaltung BT - mechanistic insights into the formation of metal carbides, phosphides, sulfides and nitrides BT - mechanistische Einblicke in die Bildung von Metallcarbiden, -phosphiden, -sulfiden und –nitriden N2 - The thesis on hand deals with the development of new types of catalysts based on pristine metals and ceramic materials and their application as catalysts for the electrocatalytic water splitting reaction. In order to breathe life into this technology, cost-efficient, stable and efficient catalysts are imploringly desired. In this manner, the preparation of Mn-, N-, S-, P-, and C-containing nickel materials has been investigated together with the theoretical and electrochemical elucidation of their activity towards the hydrogen (and oxygen) evolution reaction. The Sabatier principle has been used as the principal guideline towards successful tuning of catalytic sites. Furthermore, two pathways have been chosen to ameliorate the electrocatalytic performance, namely, the direct improvement of intrinsic properties through appropriate material selection and secondly the increase of surface area of the catalytic material with an increased amount of active sites. In this manner, bringing materials with optimized hydrogen adsorption free energy onto high surface area support, catalytic performances approaching the golden standards of noble metals were feasible. Despite varying applied synthesis strategies (wet chemistry in organic solvents, ionothermal reaction, gas phase reaction), one goal has been systematically pursued: to understand the driving mechanism of the growth. Moreover, deeper understanding of inherent properties and kinetic parameters of the catalytic materials has been gained. N2 - Wasserstoff ist einer der vielversprechendsten Energieträger aufgrund seiner hohen massenbezogenen Energiedichte. In diesem Zusammenhang erlaubt die elektrokatalytische Wasserspaltung die einfache und saubere Herstellung von Wasserstoff. Allerdings erfordert die Trennung der relativ starken Wasserstoff-Sauerstoff Bindungen beträchtliche Energie und teure Edelmetalle wie Platin oder Iridium zeigen die höchste katalytische Aktivität mit geringer Überspannung und hohen Stromdichten was zu einem guten Wirkungsgrad führt. Aus dieser Motivation heraus befasst sich die vorliegende Arbeit mit der Entwicklung neuer Katalysatoren, die auf Metalllegierungen und Keramiken basieren, sowie ihrer Anwendung für die elektrokatalytische Wasserspaltung. Besonderes Augenmerk wurde auf die Herstellung von kostengünstigen mangan-, stickstoff-, schwefel-, phosphor- und kohlenstoffhaltigen Nickelwerkstoffen gelegt und deren Aktivität experimentell und theoretisch erforscht. Nickel wurde aufgrund seines relativ günstigen Preises und hohen Vorkommens gewählt. Das Prinzip von Sabatier – die Wechselwirkung zwischen Adsorbat und Substrat sollte weder zu stark noch zu schwach sein – wurde als Leitfaden für die Entwicklung effizienter Katalysatoren benutzt. Trotz unterschiedlich angewendeter Synthesestrategien (Synthese in organischen Lösungsmitteln, ionothermale Reaktion oder Gasphasenreaktion), wurde zusätzlich systematisch ein weiteres Ziel verfolgt: Die Wachstums- und Entstehungsmechanismen dieser Materialen zu ergründen. Darüber hinaus wurde ein tieferes Verständnis der inhärenten Eigenschaften und kinetischen Parameter der katalytischen Materialien gewonnen. KW - Wasserspaltung KW - Katalysatoren KW - Keramik KW - Legierungen KW - Materialwissenschaft KW - HER KW - OER KW - water splitting reaction KW - ceramics KW - metal alloys KW - material science KW - HER KW - OER Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-93296 ER - TY - THES A1 - Riebe, Daniel T1 - Experimental and theoretical investigations of molecular ions by spectroscopy as well as ion mobility and mass spectrometry T1 - Experimentelle und theoretische Untersuchungen molekularer Ionen durch Spektroskopie sowie Ionenmobilitäts- und Massenspektrometrie N2 - The aim of this thesis was the elucidation of different ionization methods (resonance-enhanced multiphoton ionization – REMPI, electrospray ionization – ESI, atmospheric pressure chemical ionization – APCI) in ion mobility (IM) spectrometry. In order to gain a better understanding of the ionization processes, several spectroscopic, mass spectrometric and theoretical methods were also used. Another focus was the development of experimental techniques, including a high resolution spectrograph and various combinations of IM and mass spectrometry. The novel high resolution 2D spectrograph facilitates spectroscopic resolutions in the range of commercial echelle spectrographs. The lowest full width at half maximum of a peak achieved was 25 pm. The 2D spectrograph is based on the wavelength separation of light by the combination of a prism and a grating in one dimension, and an etalon in the second dimension. This instrument was successfully employed for the acquisition of Raman and laser-induced breakdown spectra. Different spectroscopic methods (light scattering and fluorescence spectroscopy) permitting a spatial as well as spectral resolution, were used to investigate the release of ions in the electrospray. The investigation is based on the 50 nm shift of the fluorescence band of rhodamine 6G ions of during the transfer from the electrospray droplets to the gas phase. A newly developed ionization chamber operating at reduced pressure (0.5 mbar) was coupled to a time-of-flight mass spectrometer. After REMPI of H2S, an ionization chemistry analogous to H2O was observed with this instrument. Besides H2S+ and its fragments, H3S+ and protonated analyte ions could be observed as a result of proton-transfer reactions. For the elucidation of the peaks in IM spectra, a combination of IM spectrometer and linear quadrupole ion trap mass spectrometer was developed. The instrument can be equipped with various ionization sources (ESI, REMPI, APCI) and was used for the characterization of the peptide bradykinin and the neuroleptic promazine. The ionization of explosive compounds in an APCI source based on soft x-radiation was investigated in a newly developed ionization chamber attached to the ion trap mass spectrometer. The major primary and secondary reactions could be characterized and explosive compound ions could be identified and assigned to the peaks in IM spectra. The assignment is based on the comparison of experimentally determined and calculated IM. The methods of calculation currently available exhibit large deviations, especially in the case of anions. Therefore, on the basis of an assessment of available methods, a novel hybrid method was developed and characterized. N2 - Ziel dieser Arbeit war die Aufklärung unterschiedlicher Ionisationsmethoden (Resonanz-verstärkte Mehrphotonenionisation – REMPI, Elektrosprayionisation – ESI, chemische Ionisation bei Atmosphärendruck – APCI) in der Ionenmobilitäts (IM)-Spektrometrie. Um ein besseres Verständnis der Ionisationsprozesse zu erhalten, wurden zusätzlich ver¬schiedene spektroskopische, massenspektrometrische und theoretische Methoden eingesetzt. Ein weiterer Schwerpunkt war die Entwicklung neuer experimenteller Techniken, darunter ein hochauflösender Spektrograph und verschiedene Kombinationen von IM- und Massenspektrometern. Der neuartige, hochauflösende 2D Spektrograph ermöglicht spektroskopische Auflösungen im Bereich kommerzieller Echelle-Spektrographen. Die geringste erreichte Halbwertsbreite eines Peaks betrug 25 pm. Der 2D Spektrograph beruht auf der Wellenlängenseparation von Licht durch eine Kombination aus einem Prisma und einem Gitter in der einen Dimension und einem Etalon in der zweiten Dimension. Das Instrument wurde erfolgreich zur Aufnahme von Raman- und laserinduzierten Plasmaspektren ein¬gesetzt. Verschiedene spektroskopische Methoden (Lichtstreuung und Fluoreszenzspektroskopie), die sowohl eine räumliche, als auch eine spektrale Auflösung erlauben, wurden zur Untersuchung der Freisetzung der Ionen im Elektrospray angewandt. Die Untersuchung beruht auf der Verschiebung der Fluoreszenzbande von Rhodamin 6G-Ionen um 50 nm beim Übergang aus den Elektrospray-Tropfen in die Gasphase. Eine neuent¬wickelte Ionisationskammer bei reduziertem Druck (0,5 mbar) wurde an ein Flugzeit-Massenspektrometer gekoppelt. Darin wurde nach REMPI von H2S eine zum H2O analoge Ionisationschemie beobachtet. Neben H2S+ und seinen Fragmenten wurden als Ergebnis von Proto-nen-Transferreaktionen H3S+ und protonierte Analytionen beobachtet. Zur Aufklärung der Peaks in IM-Spektren wurde eine Kopplung von IM-Spektrometer und linearem Quadrupol-Ionenfallen-Massenspektrometer entwickelt. Die Kopplung kann mit verschiedenen Ionisationsquellen (ESI, REMPI, APCI) ausgestattet werden und wurde zur Charakterisierung des Peptids Bradykinin und des Neuroleptikums Promazin angewendet. Die Ionisation von Sprengstoffen in einer APCI-Quelle, die auf weicher Röntgenstrahlung beruht, wurde in einer neu entwickelten, an das Ionenfallen-Massenspektrometer gekoppelten Ionisationskammer untersucht. Dabei konnten die wichtigsten Primär- und Sekundärreaktionen charakterisiert, sowie Sprengstoffionen identifiziert und den Peaks in den IM-Spektren zugeordnet werden. Diese Zuordnung beruht auf dem Vergleich von experimentell bestimmten und berechneten IM. Da die aktuell verfügbaren Berechnungsmethoden insbesondere für Anionen zu große Abweichungen zu den experimentell bestimmten IM aufweisen, wurde auf Basis der Bewertung verfügbarer Methoden eine neue Hybridmethode entwickelt und charakterisiert. KW - ion mobility spectrometry KW - mass spectrometry KW - explosives KW - X-ray KW - photoionization KW - ion mobility calculations KW - Ionenmobilitätsspektrometrie KW - Massenspektrometrie KW - Sprengstoffe KW - Röntgenstrahlung KW - Photoionisation KW - Ionenmobilitäts-Berechnungen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94632 ER - TY - THES A1 - Ulaganathan, Vamseekrishna T1 - Molecular fundamentals of foam fractionation T1 - Molekulare Grundlagen der Schaumfraktionierung N2 - Foam fractionation of surfactant and protein solutions is a process dedicated to separate surface active molecules from each other due to their differences in surface activities. The process is based on forming bubbles in a certain mixed solution followed by detachment and rising of bubbles through a certain volume of this solution, and consequently on the formation of a foam layer on top of the solution column. Therefore, systematic analysis of this whole process comprises of at first investigations dedicated to the formation and growth of single bubbles in solutions, which is equivalent to the main principles of the well-known bubble pressure tensiometry. The second stage of the fractionation process includes the detachment of a single bubble from a pore or capillary tip and its rising in a respective aqueous solution. The third and final stage of the process is the formation and stabilization of the foam created by these bubbles, which contains the adsorption layers formed at the growing bubble surface, carried up and gets modified during the bubble rising and finally ends up as part of the foam layer. Bubble pressure tensiometry and bubble profile analysis tensiometry experiments were performed with protein solutions at different bulk concentrations, solution pH and ionic strength in order to describe the process of accumulation of protein and surfactant molecules at the bubble surface. The results obtained from the two complementary methods allow understanding the mechanism of adsorption, which is mainly governed by the diffusional transport of the adsorbing protein molecules to the bubble surface. This mechanism is the same as generally discussed for surfactant molecules. However, interesting peculiarities have been observed for protein adsorption kinetics at sufficiently short adsorption times. First of all, at short adsorption times the surface tension remains constant for a while before it decreases as expected due to the adsorption of proteins at the surface. This time interval is called induction time and it becomes shorter with increasing protein bulk concentration. Moreover, under special conditions, the surface tension does not stay constant but even increases over a certain period of time. This so-called negative surface pressure was observed for BCS and BLG and discussed for the first time in terms of changes in the surface conformation of the adsorbing protein molecules. Usually, a negative surface pressure would correspond to a negative adsorption, which is of course impossible for the studied protein solutions. The phenomenon, which amounts to some mN/m, was rather explained by simultaneous changes in the molar area required by the adsorbed proteins and the non-ideality of entropy of the interfacial layer. It is a transient phenomenon and exists only under dynamic conditions. The experiments dedicated to the local velocity of rising air bubbles in solutions were performed in a broad range of BLG concentration, pH and ionic strength. Additionally, rising bubble experiments were done for surfactant solutions in order to validate the functionality of the instrument. It turns out that the velocity of a rising bubble is much more sensitive to adsorbing molecules than classical dynamic surface tension measurements. At very low BLG or surfactant concentrations, for example, the measured local velocity profile of an air bubble is changing dramatically in time scales of seconds while dynamic surface tensions still do not show any measurable changes at this time scale. The solution’s pH and ionic strength are important parameters that govern the measured rising velocity for protein solutions. A general theoretical description of rising bubbles in surfactant and protein solutions is not available at present due to the complex situation of the adsorption process at a bubble surface in a liquid flow field with simultaneous Marangoni effects. However, instead of modelling the complete velocity profile, new theoretical work has been started to evaluate the maximum values in the profile as characteristic parameter for dynamic adsorption layers at the bubble surface more quantitatively. The studies with protein-surfactant mixtures demonstrate in an impressive way that the complexes formed by the two compounds change the surface activity as compared to the original native protein molecules and therefore lead to a completely different retardation behavior of rising bubbles. Changes in the velocity profile can be interpreted qualitatively in terms of increased or decreased surface activity of the formed protein-surfactant complexes. It was also observed that the pH and ionic strength of a protein solution have strong effects on the surface activity of the protein molecules, which however, could be different on the rising bubble velocity and the equilibrium adsorption isotherms. These differences are not fully understood yet but give rise to discussions about the structure of protein adsorption layer under dynamic conditions or in the equilibrium state. The third main stage of the discussed process of fractionation is the formation and characterization of protein foams from BLG solutions at different pH and ionic strength. Of course a minimum BLG concentration is required to form foams. This minimum protein concentration is a function again of solution pH and ionic strength, i.e. of the surface activity of the protein molecules. Although at the isoelectric point, at about pH 5 for BLG, the hydrophobicity and hence the surface activity should be the highest, the concentration and ionic strength effects on the rising velocity profile as well as on the foamability and foam stability do not show a maximum. This is another remarkable argument for the fact that the interfacial structure and behavior of BLG layers under dynamic conditions and at equilibrium are rather different. These differences are probably caused by the time required for BLG molecules to adapt respective conformations once they are adsorbed at the surface. All bubble studies described in this work refer to stages of the foam fractionation process. Experiments with different systems, mainly surfactant and protein solutions, were performed in order to form foams and finally recover a solution representing the foamed material. As foam consists to a large extent of foam lamella – two adsorption layers with a liquid core – the concentration in a foamate taken from foaming experiments should be enriched in the stabilizing molecules. For determining the concentration of the foamate, again the very sensitive bubble rising velocity profile method was applied, which works for any type of surface active materials. This also includes technical surfactants or protein isolates for which an accurate composition is unknown. N2 - Die Fraktionierung ist ein Trennprozess, bei dem verschiedene Materialien auf Grund ihrer Eigenschaften voneinander getrennt werden. Bei der Sedimentation von Teilchen in einer Flüssigkeit dient deren unterschiedliche Dichte zu ihrer Trennung, da schwere Teilchen schneller auf den Boden des Gefäßes sinken als leichtere. Bei der Schaumfraktionierung als Trennprozess dient zur Trennung verschiedener Moleküle in einer Lösung deren Grenzflächenaktivität, d.h. das unterschiedliche Vermögen der Moleküle, sich an der Oberfläche von Gasblasen anzureichern. Durch das Aufsteigen der Blasen in der Flüssigkeit werden daher die Moleküle mit der höheren Grenzflächenaktivität stärker in der Schaumschicht angereichert als die weniger stark grenzflächenaktiven Komponenten. Ziel der vorliegenden Dissertation ist es, den Prozess der Schaumfraktionierung hinsichtlich der Trennung von grenzflächenaktiven Molekülen zu analysieren. Die Bildung von Blasen und deren anschließendes Aufsteigen in der Lösung kann als wichtigstes Element in diesem Prozess angesehen werden. Es ist bekannt, dass die Geschwindigkeit aufsteigender Luftblasen in Wasser eine charakteristische Größe ist, die durch die Anwesenheit grenzflächenaktiver Stoffe (Tenside, Proteine) stark verringert wird. Die vorliegende Dissertation zeigt für das ausgewählte Protein ß-Lactoglobulin und für verschiedene Lebensmittel-Tenside, dass die Messung der Aufstiegsgeschwindigkeit von Luftblasen zur Beurteilung der Anreicherung dieser Moleküle an der Blasenoberfläche ausgezeichnet geeignet ist. Die experimentellen Ergebnisse bei verschiedenen Lösungsbedingungen, wie Konzentration von Protein bzw. Tensid, pH-Wert und Ionenstärke der Lösung, zeigen deutlich, dass die Anreicherung der Proteinmoleküle wesentlich stärker ist als die von Tensiden. Dies gilt auch für Tenside mit einer sehr hohen Grenzflächenaktivität, was im Wesentlichen durch die extrem feste (nahezu irreversible) Anreicherung der Proteinmoleküle zu erklären ist. Die erzielten experimentellen Ergebnisse dienen jetzt als Grundlage für die Weiterentwicklung der Theorie aufsteigender Blasen, die besonders von der Dynamik der Anreicherung der Moleküle geprägt ist. Neueste Untersuchungen haben gezeigt, dass auf der Grundlage dieser experimentellen Ergebnisse erstmals die Geschwindigkeitskonstanten der Anreicherung (Adsorption und Desorption) unabhängig voneinander ermittelt werden können. KW - adsorption KW - air-water interface KW - protein KW - foam KW - rising bubble KW - Adsorption KW - Wasser/Luft Grenzflächen KW - steigende Blasen KW - Schaum KW - Beta-Lactoglobulin Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-94263 ER - TY - THES A1 - Klier, Dennis Tobias T1 - Upconversion luminescence in Er-codoped NaYF4 nanoparticles T1 - Frequenzaufkonversion in Er-codotierten NaYF4 Nanopartikeln BT - fundamental photophysics and optimization for life science applications BT - fundamentale Photophysik und Optimierung für Anwendungen in den Lebenswissenschaften N2 - In the context of an increasing population of aging people and a shift of medical paradigm towards an individualized medicine in health care, nanostructured lanthanides doped sodium yttrium fluoride (NaYF4) represents an exciting class of upconversion nanomaterials (UCNM) which are suitable to bring forward developments in biomedicine and -biodetection. Despite the fact that among various fluoride based upconversion (UC) phosphors lanthanide doped NaYF4 is one of the most studied upconversion nanomaterial, many open questions are still remaining concerning the interplay of the population routes of sensitizer and activator electronic states involved in different luminescence upconversion photophysics as well as the role of phonon coupling. The collective work aims to explore a detailed understanding of the upconversion mechanism in nanoscaled NaYF4 based materials co-doped with several lanthanides, e.g. Yb3+ and Er3+ as the "standard" type upconversion nanoparticles (UCNP) up to advanced UCNP with Gd3+ and Nd3+. Especially the impact of the crystal lattice structure as well as the resulting lattice phonons on the upconversion luminescence was investigated in detail based on different mixtures of cubic and hexagonal NaYF4 nanoscaled crystals. Three synthesis methods, depending on the attempt of the respective central spectroscopic questions, could be accomplished in the following work. NaYF4 based upconversion nanoparticles doped with several combination of lanthanides (Yb3+, Er3+, Gd3+ and Nd3+) were synthesized successfully using a hydrothermal synthesis method under mild conditions as well as a co-precipitation and a high temperature co-precipitation technique. Structural information were gathered by means of X-ray diffraction (XRD), electron microscopy (TEM), dynamic light scattering (DLS), Raman spectroscopy and inductively coupled plasma atomic emission spectrometry (ICP-OES). The results were discussed in detail with relation to the spectroscopic results. A variable spectroscopic setup was developed for multi parameter upconversion luminescence studies at various temperature 4 K to 328 K. Especially, the study of the thermal behavior of upconversion luminescence as well as time resolved area normalized emission spectra were a prerequisite for the detailed understanding of intramolecular deactivation processes, structural changes upon annealing or Gd3+ concentration, and the role of phonon coupling for the upconversion efficiency. Subsequently it became possible to synthesize UCNP with tailored upconversion luminescence properties. In the end, the potential of UCNP for life science application should be enunciated in context of current needs and improvements of a nanomaterial based optical sensors, whereas the "standard" UCNP design was attuned according to the special conditions in the biological matrix. In terms of a better biocompatibility due to a lower impact on biological tissue and higher penetrability for the excitation light. The first step into this direction was to use Nd3+ ions as a new sensitizer in tridoped NaYF4 based UCNP, whereas the achieved absolute and relative temperature sensitivity is comparable to other types of local temperature sensors in the literature. N2 - Ziel der Arbeit war es ein erweitertes Verständnis des Mechanismus der Lichtaufkonversion, sowie dessen gezielte Manipulation in verschiedenen Nanomaterialien auf Natriumyttrium-fluoridbasis zu erlangen. Die optischen Eigenschaften werden dabei durch eine gezielte Zusammenstellung verschiedener Lanthanoidionen hervorgerufen, welche während der Synthese in die Materialien eingebracht werden. Der Fokus lag hierbei in der Aufklärung des Zusammenspiels zwischen der Struktur der Materialien und deren Lichtaufkonver-sionsvermögen sowie dem Erlangen eines generellen Verständnisses der einzelnen Teilschritte des Lichtaufkonversionsmechanismus. Dabei wird das Licht, welches nach Anregung der Lanthanoidionen durch einen Laser von diesen emittiert wird, hinsichtlich der Farbzusammensetzung und des Abklingverhaltens der Lumineszenz untersucht. Diese Erkenntnisse geben sowohl einen Einblick in die verschiedenen Teilschritte des Lichtaufkonversionsmechanismus, als auch deren Korrelation zur Struktur der Nanomaterialien. Während der Arbeit wurde ein variabler Messplatz mit einer wellenlängendurchstimmbaren Anregungslichtquelle, einer Detektionseinheit mit hervorragender spektraler und zeitlicher Auflösung für die Messung des emittierten Lichtes sowie einer Temperiereinheit, mit der die Proben in einem Temperaturbereich von 4 Kelvin (-269,15 °C) bis 328 Kelvin (50 °C) temperiert werden können, aufgebaut. Die Proben wurden mithilfe der modernen Kopräzipitations- und Hydrothermalsynthese in verschiedenen Zusammensetzungen und Oberflächenmodifizierungen hergestellt, um sowohl Partikel für fundamentale Untersuchungen der Lichtaufkonversion verfügbar zu haben, als auch den hohen Anforderungen für Anwendungen in den Lebenswissenschaften gerecht zu werden. Die Reaktion fand bei hohen Temperaturen (160 °C bis 320 °C) unter Schutzgasatmosphäre statt und gewährleistete so die Bildung von hochkristallinen Partikeln, deren Größe stark mit der Synthesetemperatur korreliert. Mithilfe von zeitaufgelösten Lumineszenzuntersuchungen gelang ein sehr detaillierter Einblick in strukturelle Veränderungen der Nanopartikeln, welche durch klassische strukturanalytische Methoden, wie der Röntgenpulverdiffraktometrie, nicht in dem Maße möglich sind. Zudem konnte ein erheblicher Teil dazu beigetragen werden, das komplexe Zusammenspiel von Energietransportmechanismen, Gitterschwingungen und thermisch induzierten Prozessen zu verstehen. Zuletzt wurden, basierend auf der Vielzahl an gewonnenen Erkenntnissen, speziell designte Nanopartikel hergestellt. Die Farbe des Emissionslichts dieser Partikel wies dabei eine hohe Abhängigkeit von der Umgebungstemperatur auf. Auftretende Herausforderungen induziert durch das verwendete Anregungslicht im Nahinfrarotenbereich, wie das Aufheizen oder die zu hohe Absorption der Probe, wurden durch die Erweiterung des Aufkonversionssystems gelöst. Damit konnten beste Voraussetzungen für potentielle Anwendungen, wie zum Beispiel als Nanothermometer geschaffen werden. KW - Nanopartikel KW - nanoparticle KW - Frequenzaufkonversion KW - upconversion KW - Lanthanoide KW - lanthanides Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-98486 ER - TY - THES A1 - Stahlhut, Frank T1 - Entwicklung neuer triphiler, fluorkohlenstofffreier Blockcopolymere und Untersuchung ihrer Eigenschaften für Multikompartiment-Mizellen T1 - Synthesis of new triphilic fluorocarbon -free block copolymers and analysis of their suitability as multicompartment micelles N2 - Neue Systeme für triphile, fluorkohlenstofffreie Blockcopolymere in Form von Acrylat-basierten thermoresponsiven Blockcopolymeren sowie Acrylat- bzw. Styrol-basierten Terblock-Polyelektrolyten mit unterschiedlich chaotropen Kationen des jeweiligen polyanionischen Blocks wurden entwickelt. Multikompartiment-Mizellen, mizellare Aggregate mit ultrastrukturiertem hydrophobem Mizellkern die biologischen Strukturen wie dem Humanalbumin nachempfunden sind, sollten bei der Selbstorganisation in wässriger Umgebung entstehen. Durch Verwendung apolarer und polarer Kohlenwasserstoff-Domänen anstelle von fluorophilen Fluorkohlenstoff-Domänen sollte erstmals anhand solcher triphilen Systeme nachgewiesen werden, ob diese in der Lage zur selektiven Aufnahme hydrophober Substanzen in unterschiedliche Domänen des Mizellkerns sind. Mit Hilfe von sequentieller RAFT-Polymerisation wurden diese neuen triphilen Systeme hergestellt, die über einen permanent hydrophilen, eine permanent stark hydrophoben und einen dritten Block verfügen, der durch externe Einflüsse, speziell die Induzierung eines thermischen Coil-to-globule-Übergangs bzw. die Zugabe von organischen, hydrophoben Gegenionen von einem wasserlöslichen in einen polar-hydrophoben Block umgewandelt werden kann. Als RAFT-Agens wurde 4-(Trimethylsilyl)benzyl(3-(trimethylsilyl)-propyl)-trithiocarbonat mit zwei unterschiedlichen TMS-Endgruppen verwendet, das kontrollierte Reaktions-bedingungen sowie die molekulare Charakterisierung der komplexen Copolymere ermöglichte. Die beiden Grundtypen der linearen ternären Blockcopolymere wurden jeweils in zwei 2 Modell-Systeme, die geringfügig in ihren chemischen Eigenschaften sowie in dem Blocklängenverhältnis von hydrophilen und hydrophoben Polymersegmenten variierten, realisiert und unterschiedliche Permutation der Blöcke aufwiesen. Als ersten Polymertyp wurden amphiphile thermoresponsive Blockcopolymere verwendet. Modell-System 1 bestand aus dem permanent hydrophoben Block Poly(1,3-Bis(butylthio)-prop-2-yl-acrylat), permanent hydrophilen Block Poly(Oligo(ethylenglykol)monomethyletheracrylat) und den thermoresponsiven Block Poly(N,N‘-Diethylacrylamid), dessen Homopolymer eine LCST-Phasenübergang (LCST, engl.: lower critical solution temperature) bei ca. 36°C aufweist. Das Modell-System 2 bestand aus dem permanent hydrophilen Block Poly(2-(Methylsulfinyl)ethylacrylat), dem permanent hydrophoben Block Poly(2-Ethylhexylacrylat) und wiederum Poly(N,N‘-Diethylacrylamid). Im ternären Blockcopolymer erhöhte sich, je nach Blocksequenz und relativen Blocklängen, der LCST-Übergang auf 50 – 65°C. Bei der Untersuchung der Selbstorganisation für die Polymer-Systeme dieses Typs wurde die Temperatur variiert, um verschieden mizellare Überstrukturen in wässriger Umgebung zu erzeugen bzw. oberhalb des LCST-Übergangs Multikompartiment-Mizellen nachzuweisen. Die Unterschiede in der Hydrophilie bzw. den sterischen Ansprüche der gewählten hydrophilen Blöcke sowie die Variation der jeweiligen Blocksequenzen ermöglichte darüber hinaus die Bildung verschiedenster Morphologien mizellarer Aggregate. Der zweite Typ basierte auf ein Terblock-Polyelektrolyt-System mit Polyacrylaten bzw. Polystyrolen als Polymerrückgrat. Polymere ionische Flüssigkeiten wurden als Vorlage der Entwicklung zweier Modell-Systeme genommen. Eines der beiden Systeme bestand aus dem permanent hydrophilen Block Poly(Oligo(ethylenglykol)monomethyletheracrylat, dem permanent hydrophoben Block Poly(2-Ethylhexylacrylat) sowie dem Polyanion-Block Poly(3-Sulfopropylacrylat). Die Hydrophobie des Polyanion-Blocks variierte durch Verwendung großer organischer Gegenionen, nämlich Tetrabutylammonium, Tetraphenylphosphonium und Tetraphenylstibonium. Analog wurde in einem weiteren System aus dem permanent hydrophilen Block Poly(4-Vinylbenzyltetrakis(ethylenoxy)methylether), dem permanent hydrophoben Block Poly(para-Methylstyrol) und Poly(4-Styrolsulfonat) mit den entsprechenden Gegenionen gebildet. Aufgrund unterschiedlicher Kettensteifigkeit in beiden Modell-Systemen sollte es bei der Selbstorganisation der mizellarer Aggregate zu unterschiedlichen Überstrukturen kommen. Mittels DSC-Messungen konnte nachgewiesen werden, dass für alle Modell-Systeme die Blöcke in Volumen-Phase miteinander inkompatibel waren, was eine Voraussetzung für Multikompartimentierung von mizellaren Aggregaten ist. Die Größe mizellarer Aggregate sowie der Einfluss externer Einflüsse wie der Veränderung der Temperatur bzw. der Hydrophobie und Größe von Gegenionen auf den hydrodynamischen Durchmesser mittels DLS-Untersuchungen wurden für alle Modell-Systeme untersucht. Die Ergebnisse zu den thermoresponsiven ternären Blockcopolymeren belegten , dass sich oberhalb der Phasenübergangstemperatur des thermoresponsiven Blocks die Struktur der mizellaren Aggregate änderte, indem der p(DEAm)-Block scheinbar kollabierte und so zusammen mit den permanent hydrophoben Block den jeweiligen Mizellkern bildete. Nach gewisser Equilibrierungszeit konnten bei Raumtemperatur dir ursprünglichen mizellaren Strukturen regeneriert werden. Hingegen konnte für die Terblock-Polyelektrolyt-Systeme bei Verwendung der unterschiedlich hydrophoben Gegenionen kein signifikanter Unterschied in der Größe der mizellaren Aggregate beobachtet werden. Zur Abbildung der mizellaren Aggregate mittels kryogene Transmissionselektronenmikroskopie (cryo-TEM) der mizellaren Aggregate war mit Poly(1,3-Bis(butylthio)-prop-2-yl-acrylat) ein Modell-System so konzipiert, dass ein erhöhter Elektronendichtekontrast durch Schwefel-Atome die Visualisierung ultrastrukturierter hydrophober Mizellkerne ermöglichte. Dieser Effekt sollte in den Terblock-Polyelektrolyt-Systemen auch durch die Gegenionen Tetraphenylphosphonium und Tetraphenylstibonium nachgestellt werden. Während bei den thermoresponsiven Systemen auch oberhalb des Phasenübergangs kein Hinweis auf Ultrastrukturierung beobachtet wurde, waren für die Polyelektrolyt-Systeme, insbesondere im Fall von Tetraphenylstibonium als Gegenion Überstrukturen zu erkennen. Der Nachweis der Bildung von Multikompartiment-Mizellen war für beide Polymertypen mit dieser abbildenden Methode nicht möglich. Die Unterschiede in der Elektronendichte einzelner Blöcke müsste möglicherweise weiter erhöht werden um Aussagen diesbezüglich zu treffen. Die Untersuchung von ortsspezifischen Solubilisierungsexperimenten mit solvatochromen Fluoreszenzfarbstoffen mittels „steady-state“-Fluoreszenzspektroskopie durch Vergleich der Solubilisierungsorte der Terblockcopolymere bzw. –Polyelektrolyte mit den jeweiligen Solubilisierungsorten von Homopolymer- und Diblock-Vorstufen sollten den qualitativen Nachweis der Multikompartimentierung erbringen. Aufgrund der geringen Mengen an Farbstoff, die für die Solubilisierungsexperimente eingesetzt wurden zeigten DLS-Untersuchungen keine störenden Effekte der Sonden auf die Größe der mizellaren Aggregate. Jedoch erschwerten Quench-Effekte im Falle der Polyelektrolyt Modell-Systeme eine klare Interpretation der Daten. Im Falle der Modell-Systeme der thermoresponsiven Blockcopolymere waren dagegen deutliche solvatochrome Effekte zwischen der Solubilisierung in den mizellaren Aggregaten unterhalb und oberhalb des Phasenübergangs zu erkennen. Dies könnte ein Hinweis auf Multikompartimentierung oberhalb des LCST-Übergangs sein. Ohne die Informationen einer Strukturanalyse wie z.B. der Röntgen- oder Neutronenkleinwinkelstreuung (SAXS oder SANS), kann nicht abschließend geklärt werden, ob die Solubilisierung in mizellaren hydrophoben Domänen des kollabierten Poly(N,N‘-Diethylacrylamid) erfolgt oder in einer Mischform von mizellaren Aggregaten mit gemittelter Polarität. N2 - New systems for triphilic fluorine-carbon-free block copolymers in the form of acrylate-based thermoresponsive block copolymers and acrylate- and styrene-based ternary block polyelectrolytes with different chaotropic cations of the respective polyanionic blocks have been developed. Multicompartment micelles, micellar aggregates with ultrastructured hydrophobic micelle core which are bio-inspired by biological structures like human serum albumin, should occur during the self-assembly in aqueous environment. By having nonpolar and polar hydrocarbon domains instead of fluorocarbon domains in these triphilic systems, it should be possible to demonstrate for the first time, whether they are capable of selectively uptaking hydrophobic substances in different hydrophobic domains of the micelle core. These new triphilic systems were prepared by using sequential RAFT polymerization. These polymers are based on a permanently hydrophilic polymer block; a permanent highly hydrophobic block and a third block which is sensitive to the result of external influences, especially the induction of a thermal coil-to-globule transition in the case of thermoresponsive block copolymers or adding organic hydrophobic counter ions in the case of block polyelectrolytes. The third block for each system can be converted from a water-soluble in a polar hydrophobic block due to external stimulus. The RAFT agent, 4- (trimethylsilyl) benzyl (3- (trimethylsilyl) propyl) trithiocarbonate, has two different TMS-labeled end groups, which enable controlled polymerization conditions and the exact molecular characterization of the complex copolymers. Each of the two basic types of linear ternary block copolymers, which were prepared for this work, were implemented in two 2 model systems that varied slightly in their chemical properties, as well as in the block length ratio of hydrophilic and hydrophobic polymer segments and different block sequences. The first polymer type is based on amphiphilic thermoresponsive block copolymers. Model system 1 consisted of the permanent hydrophobic block p(1,3-bis (butylthio) prop-2-yl acrylate), the permanently hydrophilic block p(oligo (ethylene glycol) mono methyl ether acrylate) and the thermoresponsive block p(N,N–diethyl acrylamide) whose homopolymer has a LCST (lower critical solution temperature) like phase transition approximately about 36°C. The model system 2 consisted of the permanent hydrophilic block p(2- (methylsulfinyl) ethyl acrylate), the permanently hydrophobic block p(2-ethylhexyl acrylate) and again p(N,N–diethyl acrylamide). The LCST is increased in ternary block copolymers to 50 - 65°C, depending on the block sequence and relative block lengths. To study the self-assembly of these two polymer systems, their aqueous micellar solutions where analyzed above and below LCST to produce different micellar superstructures in an aqueous environment and to prove the occurrence of multicompartment micelles above LCST. The differences in the hydrophilicity or the individual steric requirements of the chosen hydrophilic blocks as well as the variation of the respective block sequences lead additionally to different morphologies of micellar aggregates. The second type of polymers is based on ternary block polyelectrolytes with polyacrylates and polystyrenes as polymer backbone respectively. Polymeric ionic liquids were taken as role model for the development of two model systems of block polyelectrolytes. One of the two systems consisting of the permanently hydrophilic p(oligo (ethylene glycol) mono methyl ether acrylate), the permanent hydrophobic block p(2-ethylhexyl acrylate) and the polyanion block p(3-sulfopropyl acrylate) (= model system 3). The hydrophobicity of the polyanion blocks varied largely by using organic counter ions, namely tetrabutyl ammonium, tetraphenyl phosphonium and tetraphenyl stibonium. Analogously, model system 4 consists of a permanently hydrophilic block p(4-vinylmethoxybenzyltetrakis (oxyethylene) ether), a permanently hydrophobic block p(para-methyl styrene) and p(4-styrene sulfonate) formed with the corresponding counter ions. Due to different chain stiffness in both model systems there should be different superstructures of micellar aggregates in aqueous solution. DSC (differential scanning calorimetry) measurements could demonstrate that the all polymer blocks for each modell system were incompatible with each other in bulk phase. This property is a prerequisite for ultra-structured hydrophobic cores of micellar aggregates. The influence of external factors such as change of temperature or change of hydrophobicity and size of counter ions on the size of micellar aggregates for all model systems was examined by DLS measurements. The results on the thermoresponsive ternary block copolymers showed that above the phase transition temperature of the thermo-responsive block the structure of micellar aggregates changed because the p(N,N–diethyl acrylamide) block apparently collapsed formed a subdivided micellar core together with the permanently hydrophobic block. Some equilibration time for the thermoresponsive block copolymer systems were needed to ensure that heoriginal micellar structures could be regenerated after cooling heated auqeous micellar solutions to room temperature. However, for the ternary block polyelectrolytes, there was no significant difference in the size of the micellar aggregates due to the exchange of counter ions which differ by their hydrophobicity. For imaging the micellar aggregates and especially multicompartment micelles by means of cryogenic transmission electron microscopy (cryo-TEM), the model system 1 with p(1,3-bis (butylthio) -prop-2-yl acrylate) as permanently hydrophobic block was specifically designed so that the increased electron density contrast by sulfur atoms should enable the visualization of multicompartment micelles. This effect should be readjusted in the ternary block polyelectrolyte systems by the counter ions tetraphenyl phosphonium and tetraphenyl stibonium. While in the thermoresponsive block copolymer systems it was possible to observe new kinds of micellar aggregates above LCST, there was no indication on ultrastructuring in the micellar cores for all analyzed systems. Otherwise by using tetraphenyl stibonium counter ions in block polyelectrolyte systems, some kind of ultrastructured micellar aggregates with seemingly subdivided micellar cores could be observed. The detection of the formation of multicompartment micelles was not possible for both types of polymers with this direct imaging method. The differences in the electron density of individual blocks might have to be further increased to make statements concerning the self-assembly into multicompartment micelles. Site-specific solubilization experiments with solvatochromic fluorescent dyes by using steady-state fluorescence spectroscopy should provide the qualitative evidence of multicompartment micelles. The selective solubilization areas of different kinds of substances in self-assembled structures of all ternary block copolymers and ternary polyelectrolytes were compared with the solubilization areas in their respective homopolymer and diblock precursors. Because of the small amounts of dye that have been used for the solubilization DLS measurements showed no interfering effects of the probes on the size of the micellar aggregates. However, quenching effects made a clear interpretation of the data in the case of polyelectrolyte model systems difficult. In the case of model systems 1 and 2 a change of the solubilization areas of fluorescent dyes due to the occurrence significant solvatochromic effects (stokes shifts) above LCST could be observed. The effect was reversibel. This could be an indication that the micellar aggregates self-assemble into multicompartment micelles above the LCST transition. Without the information of a structural analysis such as the small angle x-ray scattering or small angle neutron scattering (SAXS or SANS), it cannot be conclusively clarified whether the solubilization occurs in micellar hydrophobic domains of the collapsed p(N,N–diethyl acrylamide), or in a mixed form of micellar aggregates with mixed polarity. KW - Blockcopolymere KW - RAFT KW - Multikompartiment-Mizellen KW - cryo-TEM KW - Solubilisierung KW - Fluoereszenzsonden KW - block copolymers KW - triphilic KW - RAFT KW - multicompartment micelles KW - cryo-TEM KW - fluorescent dyes KW - fluorescence probe experiments KW - triphil Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-96299 SP - iv, 191 ER - TY - THES A1 - Mai, Tobias T1 - Polymerunterstützte Calciumphosphatmineralisation T1 - Polymer supported calcium phosphate mineralization N2 - Im Verlauf dieser Arbeit sind Blockcopolymere verschiedener Ladung auf Basis von PEO mit hohen Molekulargewichten durch lebendende freie radikalische Polymerisation hergestellt worden. Die Polymere sind einfach im Grammmaßstab herstellbar. Sie zeigen sowohl einen großen Einfluss auf die Nukleation als auch auf die Auflösung von Calciumphosphat. Gleichwohl scheint das Vorhandensein von positiven Gruppen (Kationen, Ampholyten und Betainen) keinen dramatischen Einfluss auf die Nukleation zu haben. So verursachen Polymere mit positiven Ladungen die gleiche Retentionwirkung wie solche, die ausschließlich anionische Gruppen enthalten. Aus der Verwendung der kationischen, ampholytischen und betainischen Copolymere resultiert allerdings eine andersartige Morphologie der Niederschläge, als aus der Verwendung der Anionischen hervorgeht. Bei der Stabilisierung einer HAP-Oberfläche setzt sich dieser Trend fort, das heißt, rein anionische Copolymere wirken stärker stabilisierend als solche, die positive Ladungen enthalten. Durch Inkubation von menschlichem Zahnschmelz mit anionischen Copolymeren konnte gezeigt werden, dass die Biofilmbildung verglichen mit einer unbehandelten Zahnoberfläche eingeschränkt abläuft. All dies macht die Polymere zu interessanten Additiven für Zahnpflegeprodukte. Zusätzlich konnten auf Basis dieser rein anionischen Copolymere Polymerbürsten, ebenfalls über lebendende freie radikalische Polymerisation, hergestellt werden. Diese zeichnen sich durch einen großen Einfluss auf die Kristallphase aus und bilden mit dem CHAP des AB-Types das Material, welches auch in Knochen und Zähnen vorkommt. Erste Cytotoxizitätstests lassen auf das große Potential dieser Polymerbürsten für Beschichtungen in der Medizintechnik schließen. N2 - The thesis at hand describes the preparation of block-copolymers composed of uncharged polyethyleneoxides and differently charged methacrylate-based blocks. Synthesized via living free-radical polymerization the charged blocks were prepared by using of the following monomers: I) for anionic blocks 3-Sulfopropyl methacrylate potassium salt (SPM); II) for cationic blocks 2-(trimethyl ammonium) ethyl methacrylate chloride (TMAEMA) or2-(N-3-Cyanopropyl-N,N-dimethyl ammonium chloride) ethyl methacrylate (CPDMAEMA); III) for betainic blocks [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (MEDSAH) and IV) for ampholytic blocks the anionic SPM and one of the two cationic monomers TMAEMA or CPDMAEMA were used in equal parts. The polymers were accessible in a multigram scale. The resulting block-copolymers show a strong effect on both the dissolution and the nucleation of calcium phosphate. The presence of positively charged moieties in case of applying polycations, polyampholytes and polybetaines does not seem to influence the nucleation in a different manner than the negatively charged polyanions. Nontheless the application of cationic, betainic or ampholytic polymers leads to different morphology of the calcium phosphate precipitates compared to the anionic polymers. The presence of anions results in the formation of spherical well-separated particles whereas cations, ampholytes and betaines cause the composition of smaller particles. In contrast to this data obtained by energy-dispersive X-ray spectroscopy and X-ray crystallography show that calcium deficient hydroxyapatite was formed in all cases. Therefore it can be concluded that the polymers' charge influences the morphology but not the crystal phase. This observation extends to the stabilization of the hydroxyapatite's (HAP) surface. A comparison of polymers containing cations and anionic polymers reveals a stronger stabilizing effect for anions. With the calcium phosphate's dissolution per monomer unit taken into consideration only the anionic charges lead to a stabilization of the HAP-surface at low polymer concentrations while in presence of positive charges a destabilization is observed. By incubating human enamel specimen with mixtures of anionic copolymers and natural human saliva a reduced biofilm formation could be detected when compared to polymer free saliva. Thus the polymers could be potentially used for dental care products. Additionally it was possible to synthesize polymer brushes based on the anionic copolymers' architecture. Again SPM was polymerized yet fastened on a silicon surface via living free-radical polymerization in a grafting-from mechanism. The brushes stand out due to a great influence on the crystal phase of calcium phosphate. They promote the formation of AB-type carbonate substituted hydroxyapatite (CHAP) a material in human bones and teeth that is formed increasingly with age. Initial cytotoxicity tests of both mineralized and unmineralized brushes indicate a high potential of the brushes for biomedical engineering. KW - Polymerchemie KW - polymer chemistry KW - Calciumphosphat KW - calcium phosphate KW - Mineralisation KW - mineralization Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89056 ER - TY - THES A1 - Ehlert, Christopher T1 - Simulationen von Röntgenabsorptionsprozessen zur Charakterisierung von Systemen in kondensierter Phase T1 - Simulation of X-ray absorption processes to characterize condensed phase systems N2 - Die vorgelegte Dissertation präsentiert wissenschaftliche Ergebnisse, die in der Zeit vom Dezember 2012 bis August 2016, erarbeitet wurden. Der zentrale Inhalt der Arbeit ist die Simulation von Röntgenabsorptionsprozessen von verschiedenen Systemen in kondensierter Phase. Genauer gesagt, werden Nahkantenabsorptions- (NEXAFS) sowie Röntgenphotoelektronenspektren (XPS) berechnet. In beiden Fällen wird ein Röntgenphoton von einem molekularen System absorbiert. Aufgrund der hohen Photonenenergie wird ein stark gebundenes kernnahes Elektron angeregt. Bei der XPS gelangt dieses mit einer zu messenden kinetischen Energie in Kontinuumszustände. In Abhängigkeit der eingestrahlten Photonenenergie und der kinetischen Energie des austreten Elektrons, kann die Bindungsenergie berechnet werden, welche die zentrale Größe der XPS ist. Im Falle der NEXAFS-Spektroskopie wird das kernnahe Elektron in unbesetzte gebundene Zustände angeregt. Die zentrale Größe ist die Absorption als Funktion der eingestrahlten Photonenenergie. Das erste Kapitel meiner Arbeit erörtert detailliert die experimentellen Methoden sowie die daraus gewonnenen charakteristischen Größen. Die experimentellen Spektren zeigen oft viele Resonanzen, deren Interpretation aufgrund fehlender Referenzmaterialien schwierig ist. In solchen Fällen bietet es sich an, die Spektren mittels quantenchemischer Methoden zu simulieren. Der dafür erforderliche mathematisch-physikalische Methodenkatalog wird im zweiten Kapitel der Arbeit erörtert. Das erste von mir untersuchte System ist Graphen. In experimentellen Arbeiten wurde die Oberfläche mittels Bromplasma modifiziert. Die im Anschluss gemessenen NEXAFS-Spektren unterscheiden sich maßgeblich von den Spektren der unbehandelten Oberfläche. Mithilfe periodischer DFT-Rechnungen wurden verschiedene Gitterdefekte sowie bromierte Systeme untersucht und die NEXAFS-Spektren simuliert. Mittels der Simulationen können die Beiträge verschiedener Anregungszentren analysiert werden. Die Berechnungen erlauben den Schluss, dass Gitterdefekte maßgeblich für die entstandenen Veränderungen verantwortlich sind. Polyvinylalkohol (PVA) wurde als zweites System behandelt. Hierbei sollte untersucht werden, wie groß der Einfluss der Molekularbewegung auf die Verbreiterung der Peaks im XP-Spektrum ist. Des Weiteren wurde untersucht, wie groß der Einfluss von intermolekularen Wechselwirkungen auf die Peakpositionen und Peakverbreiterung ist. Für die Berechnung dieses Systems wurde eine Kombination aus molekulardynamischen und quantenchemischen Methoden verwendet. Als Strukturen dienten Oligomermodelle, die unter dem Einfluss eines (ab initio) Potentials propagiert wurden. Entlang der erstellten Trajektorie wurden Schnappschüsse der Geometrien extrahiert und für die Berechnung der XP-Spektren verwendet. Die Spektren werden bereits mithilfe klassischer Molekulardynamik sehr gut reproduziert. Die erhaltenen Peakbreiten sind verglichen mit dem Experiment allerdings zu klein. Die Hauptursache der Peakverbreiterung ist die Molekularbewegung. Intermolekulare Wechselwirkungen verschieben die Peakpositionen um 0.6 eV zu kleineren Anregungsenergien. Im dritten Teil der Arbeit stehen die NEXAFS-Spektren von ionischen Flüssigkeiten (ILs) im Fokus. Die experimentell gefundenen Spektren zeigen eine komplexe Struktur mit vielen Resonanzen. In der Arbeit wurden zwei ILs untersucht. Als Geometrien verwenden wir Clustermodelle, die aus experimentellen Kristallstrukturen extrahiert wurden. Die berechneten Spektren erlauben es, die Resonanzen den Anregungszentren zuzuordnen. Außerdem kann eine erstmals gemessene Doppelresonanz simuliert und erklärt werden. Insgesamt kann die Interpretation der Spektren mithilfe der Simulation signifikant erweitert werden. In allen Systemen wurde zur Berechnung des NEXAFS-Spektrums eine auf Dichtefunktionaltheorie basierende Methode verwendet (die sogenannte Transition-Potential Methode). Gängige wellenfunktionsbasierte Methoden, wie die Konfigurationswechselwirkung mit Einfachanregungen (CIS), zeigen eine starke Blauverschiebung, wenn als Referenz eine Hartree-Fock Slaterdeterminante verwendet wird. Wir zeigen, dass die Verwendung von kernnah-angeregten Determinanten sowohl das resultierende Spektrum als auch die Anregungsenergien deutlich verbessert. Des Weiteren werden auch Referenzen aus Dichtefunktionalrechnungen getestet. Zusätzlich werden auch Referenzen mit gebrochenen Besetzungszahlen für kernnahe Elektronen verwendet. In der Arbeit werden die Resultate der verschiedenen Referenzen miteinander verglichen. Es zeigt sich, dass Referenzen mit gebrochenen Besetzungszahlen das Spektrum nicht weiter verbessern. Der Einfluss der verwendeten Elektronenstrukturmethode ist eher gering. N2 - The dissertation presents scientific results, which were worked out during December 2012 - August 2016. The work focuses on the simulation of X-ray absorption processes of several condensed phase systems. In particular, we calculated near edge X-ray absorption (NEXAFS) as well as X-ray photoelectron spectra (XPS). In both cases an incoming X-ray photon is absorbed by a molecular system. Due to the relatively high photon energy, a tightly bound core electron is excited. For XPS, this electron is promoted to high lying continuum states. The binding energy of the core electron, which is the key feature of XPS, can be calculated as the difference between the energy of the incoming photon and the measured kinetic energy of the electron. For NEXAFS spectra, the absorption probability of a photon as a function of the wavelength of the incoming radiation is measured. Both experimental methods are presented in chapter one of my thesis. Often the experimental spectra contain a lot of resonances, which make the interpretation and analysis complicated. In such cases, quantum chemical calculations can help to understand the spectra. In chapter two the central theoretical methods are presented, which are necessary to simulate the X-ray absorption processes. The first investigated system is graphene, which was treated with bromine plasma in order to modify the chemical and physical properties by adding bromine. The measured NEXAFS spectra of modified graphene show significant differences with respect to the spectra of the untreated surface. With the help of periodic density functional theory (DFT) calculations and simulations of spectra, it is demonstrated that physical defects are primarily responsible for the observed changes in the spectra. Polyvinyl alcohol (PVA) is the second investigated system. We were interested in the influence of the molecular motion on the broadening of the XPS peaks. Further, we looked at the intermolecular interactions and their influence on the peak positions and broadenings. In order to accomplish this, a combination of molecular dynamics and quantum chemical methods have been used. Appropriate structures based on oligomer models were created and propagated under the influence of an (ab initio) potential. Snapshots were taken during the propagation to calculate the core electron binding energies. In the third part of my work, Ionic Liquids have been investigated. The experiment found a very complex and complicated absorption behavior with a lot of resonances. We used cluster models, based on experimental crystallographic data, to simulate the spectra with density functional methods. Our calculations allow a comprehensive and in-depth analysis of the experimental spectra. The interpretation could be significantly extended. In all presented systems, the so-called transition potential (TP)-DFT method based on density functional theory has been used. Common wave function based methods like configuration interaction singles (CIS) are inappropriate to calculate X-ray absorption spectra, when a Hartree-Fock reference is used. We demonstrate that, by using core-hole excited determinants as reference wave function for CIS calculations, the quality of the obtained spectra can be significantly improved. We further investigate the influence of different density functionals as well as fractional occupations to the shape and position of the resulting spectra. KW - quantum chemical calculations KW - XPS KW - NEXAFS KW - DFT KW - condensed phase systems KW - quantenchemische Berechnungen KW - XPS KW - NEXAFS KW - DFT KW - kondensierte Phase Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-104844 ER -