TY - JOUR A1 - Stubning, Tobias A1 - Denes, Istvan A1 - Gerhard, Reimund T1 - Tuning electro-mechanical properties of EAP-based haptic actuators by adjusting layer thickness and number of stacked layers BT - a comparison JF - Engineering research express N2 - In our fast-changing world, human-machine interfaces (HMIs) are of ever-increasing importance. Among the most ubiquitous examples are touchscreens that most people are familiar with from their smartphones. The quality of such an HMI can be improved by adding haptic feedback-an imitation of using mechanical buttons-to the touchscreen. Thin-film actuators on the basis of electro-mechanically active polymers (EAPs), with the electroactive material sandwiched between two compliant electrodes, offer a promising technology for haptic surfaces. In thin-film technology, the thickness and the number of stacked layers of the electroactive dielectric are key parameters for tuning a system. Therefore, we have experimentally investigated the influence of the thickness of a single EAP layer on the electrical and the electro-mechanical performance of the transducer. In order to achieve high electro-mechanical actuator outputs, we have employed relaxor-ferroelectric ter-fluoropolymers that can be screen-printed. By means of a model-based approach, we have also directly compared single- and multi-layer actuators, thus providing guidelines for optimized transducer configurations with respect to the system requirements of haptic applications for which the operation frequency is of particular importance. KW - haptic feedback KW - vinylidenefluoride(VDF)-based polymers KW - screen-printed KW - systems KW - thin-film actuators KW - multi-layer systems KW - equivalent-circuit KW - modelling KW - electro-mechanically active polymers Y1 - 2021 U6 - https://doi.org/10.1088/2631-8695/abd286 SN - 2631-8695 VL - 3 IS - 1 PB - Institute of Physics CY - London ER - TY - THES A1 - Grimbs, Sergio T1 - Towards structure and dynamics of metabolic networks T1 - Struktur und Dynamik metabolischer Netzwerke N2 - This work presents mathematical and computational approaches to cover various aspects of metabolic network modelling, especially regarding the limited availability of detailed kinetic knowledge on reaction rates. It is shown that precise mathematical formulations of problems are needed i) to find appropriate and, if possible, efficient algorithms to solve them, and ii) to determine the quality of the found approximate solutions. Furthermore, some means are introduced to gain insights on dynamic properties of metabolic networks either directly from the network structure or by additionally incorporating steady-state information. Finally, an approach to identify key reactions in a metabolic networks is introduced, which helps to develop simple yet useful kinetic models. The rise of novel techniques renders genome sequencing increasingly fast and cheap. In the near future, this will allow to analyze biological networks not only for species but also for individuals. Hence, automatic reconstruction of metabolic networks provides itself as a means for evaluating this huge amount of experimental data. A mathematical formulation as an optimization problem is presented, taking into account existing knowledge and experimental data as well as the probabilistic predictions of various bioinformatical methods. The reconstructed networks are optimized for having large connected components of high accuracy, hence avoiding fragmentation into small isolated subnetworks. The usefulness of this formalism is exemplified on the reconstruction of the sucrose biosynthesis pathway in Chlamydomonas reinhardtii. The problem is shown to be computationally demanding and therefore necessitates efficient approximation algorithms. The problem of minimal nutrient requirements for genome-scale metabolic networks is analyzed. Given a metabolic network and a set of target metabolites, the inverse scope problem has as it objective determining a minimal set of metabolites that have to be provided in order to produce the target metabolites. These target metabolites might stem from experimental measurements and therefore are known to be produced by the metabolic network under study, or are given as the desired end-products of a biotechological application. The inverse scope problem is shown to be computationally hard to solve. However, I assume that the complexity strongly depends on the number of directed cycles within the metabolic network. This might guide the development of efficient approximation algorithms. Assuming mass-action kinetics, chemical reaction network theory (CRNT) allows for eliciting conclusions about multistability directly from the structure of metabolic networks. Although CRNT is based on mass-action kinetics originally, it is shown how to incorporate further reaction schemes by emulating molecular enzyme mechanisms. CRNT is used to compare several models of the Calvin cycle, which differ in size and level of abstraction. Definite results are obtained for small models, but the available set of theorems and algorithms provided by CRNT can not be applied to larger models due to the computational limitations of the currently available implementations of the provided algorithms. Given the stoichiometry of a metabolic network together with steady-state fluxes and concentrations, structural kinetic modelling allows to analyze the dynamic behavior of the metabolic network, even if the explicit rate equations are not known. In particular, this sampling approach is used to study the stabilizing effects of allosteric regulation in a model of human erythrocytes. Furthermore, the reactions of that model can be ranked according to their impact on stability of the steady state. The most important reactions in that respect are identified as hexokinase, phosphofructokinase and pyruvate kinase, which are known to be highly regulated and almost irreversible. Kinetic modelling approaches using standard rate equations are compared and evaluated against reference models for erythrocytes and hepatocytes. The results from this simplified kinetic models can simulate acceptably the temporal behavior for small changes around a given steady state, but fail to capture important characteristics for larger changes. The aforementioned approach to rank reactions according to their influence on stability is used to identify a small number of key reactions. These reactions are modelled in detail, including knowledge about allosteric regulation, while all other reactions were still described by simplified reaction rates. These so-called hybrid models can capture the characteristics of the reference models significantly better than the simplified models alone. The resulting hybrid models might serve as a good starting point for kinetic modelling of genome-scale metabolic networks, as they provide reasonable results in the absence of experimental data, regarding, for instance, allosteric regulations, for a vast majority of enzymatic reactions. N2 - In dieser Arbeit werden mathematische und informatische Ansätze zur Behandlung diverser Probleme im Zusammenhang mit der Modellierung metabolischer Netzwerke vorgestellt, insbesondere unter Berücksichtigung der eingeschränkten Verfügbarkeit detaillierter Enzymkinetiken. Es wird gezeigt, dass präzise mathematische Formulierungen der Probleme notwendig sind, um erstens angemessene und, falls möglich, effiziente Algorithmen zur Lösung zu entwickeln. Und zweitens, um die Güte der so gefundenen Lösungen zu bewerten. Des weiteren werden Methoden zur Analyse dynamischer Eigenschaften metabolischer Netzwerke eingeführt, welche entweder nur auf der Struktur der Netzwerke basieren oder zusätzlich noch Informationen über stationäre Zustände mit berücksichtigen. Außerdem wird eine Strategie zur Bestimmung von Schlüsselreaktionen eines Netzwerkes vorgestellt, welche die Entwicklung kinetischer Modelle vereinfacht. Der Erfolg neuer Technologien ermöglicht eine immer billigere und schnellere Sequenzierung des Genoms. Dies wird in naher Zukunft die Analyse biologischer Netzwerke nicht nur für Spezies, sondern auch für einzelne Individuen ermöglichen. Die automatische Rekonstruktion metabolischer Netzwerke ist bestens dafür geeignet, diese großen Datenmengen auszuwerten. Eine mathematische Formulierung der Rekonstruktion als Optimierungsproblem wird vorgestellt, die sowohl bereits vorhandenes Wissen als auch theoretische Vorhersagen verschiedenster bioinformatischer Methoden berücksichtigt. Die rekonstruierten Netzwerke sind hinsichtlich möglichst großer und plausibler Zusammenhangskomponenten hin optimiert, um fragmentierte und isolierte Teilnetzwerke zu vermeiden. Als Beispiel dient die Rekonstruktion der Saccharosesynthese in Chlamydomonas reinhardtii. Es wird gezeigt, dass das Problem sehr rechenintensiv ist und somit Approximationsalgorithmen erforderlich macht. Das 'inverse scope' Problem hat als Optimierungsziel, für ein gegebenes metabolisches Netzwerk die minimale Menge notwendiger Metabolite zu bestimmen, um eine ebenfalls gegebene Menge von gewünschten Zielmetaboliten zu produzieren. Diese Zielmetabolite können entweder durch experimentellen Messungen festgelegt werden, oder sie sind die gewünschten Endprodukte einer biotechnologischen Anwendung. Es wird gezeigt, dass das 'inverse scope' Problem rechenintensiv ist. Allerdings wird angenommen, dass die Berechnungskomplexität stark von der Anzahl gerichteter Zyklen innerhalb des metabolischen Netzwerkes abhängt. Dies könnte die Entwicklung effizienter Approximationsalgorithmen ermöglichen. Unter der Annahme von Massenwirkungskinetiken erlaubt es die 'chemical reaction network theory' (CRNT), anhand der Struktur metabolischer Netzwerke Rückschlüsse auf Multistabilität zu ziehen. Auch weitere Kinetiken können durch Modellierung von Enzymmechanismen mit berücksichtigt werden. CRNT wird zum Vergleich von mehreren Modellen des Calvinzyklus, welche sich in Größe und Abstraktionsniveau unterscheiden, verwendet. Obwohl für kleinere Modelle Ergebnisse erzielt werden, erlauben es die verfügbaren Theoreme und Algorithmen der CRNT nicht, Aussagen für größere Modelle zu machen, da die gegenwärtigen Implementierungen der Algorithmen an ihre Berechnungsgrenzen stoßen. Sind sowohl die Stoichiometrie eines metabolischen Netzwerkes, als auch die Metabolitkonzentrationen und Flüsse im stationären Zustand bekannt, so kann 'structural kinetic modelling' angewandt werden, um das dynamische Verhalten des Netzwerkes zu analysieren, selbst wenn die expliziten Ratengleichung unbekannt sind. Dieser Ansatz wird verwendet, um den stabilisierenden Einfluss allosterischer Regulation in menschlichen Erythrozyten zu untersuchen. Des weiteren werden die Reaktionen anhand ihrer Bedeutung hinsichtlich Stabilität im stationären Zustand angeordnet. Die wichtigsten Reaktionen bezüglich dieser Ordnung sind Hexokinase, Phosphofructokinase und Pyruvatkinase, welche bekanntermaßen stark reguliert und irreversibel sind. Kinetische Modelle, die auf generischen Ratengleichung beruhen, werden mit detaillierten Referenzmodellen für Erythrozyten und Hepatozyten verglichen. Die generischen Modelle simulieren das Verhalten nur in der Nähe eines gegebenen stationären Zustandes recht gut. Der zuvor erwähnte Ansatz, wichtige Reaktionen bezüglich Stabilität zu identifizieren, wird zur Bestimmung von Schlüsselreaktionen genutzt. Diese Schlüsselreaktionen werden im Detail modelliert, während für alle anderen Reaktionen weiterhin generische Ratengleichung verwendet werden. Die so entstandenen Hybridmodelle können das Verhalten des Referenzmodells signifikant besser beschreiben. Die Hybridmodelle können als Ausgangspunkt zur Erstellung genomweiter kinetischer Modelle dienen. KW - metabolische Netzwerke KW - Modellierung KW - Struktur KW - Dynamik KW - Bioinformatik KW - metabolic networks KW - modelling KW - structure KW - dynamics KW - bioinformatics Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-32397 ER - TY - JOUR A1 - Moradi, Ahmad B. A1 - Carminati, Andrea A1 - Vetterlein, Doris A1 - Vontobel, Peter A1 - Lehmann, Eberhard A1 - Weller, Ulrich A1 - Hopmans, Jan W. A1 - Vogel, Hans-Jörg A1 - Oswald, Sascha T1 - Three-dimensional visualization and quantification of water content in the rhizosphere JF - New phytologist : international journal of plant science N2 - Despite the importance of rhizosphere properties for water flow from soil to roots, there is limited quantitative information on the distribution of water in the rhizosphere of plants. Here, we used neutron tomography to quantify and visualize the water content in the rhizosphere of the plant species chickpea (Cicer arietinum), white lupin (Lupinus albus), and maize (Zea mays) 12 d after planting. We clearly observed increasing soil water contents (h) towards the root surface for all three plant species, as opposed to the usual assumption of decreasing water content. This was true for tap roots and lateral roots of both upper and lower parts of the root system. Furthermore, water gradients around the lower part of the roots were smaller and extended further into bulk soil compared with the upper part, where the gradients in water content were steeper. Incorporating the hydraulic conductivity and water retention parameters of the rhizosphere into our model, we could simulate the gradual changes of h towards the root surface, in agreement with the observations. The modelling result suggests that roots in their rhizosphere may modify the hydraulic properties of soil in a way that improves uptake under dry conditions. KW - extent of rhizosphere KW - modelling KW - neutron tomography KW - rhizosphere hydraulic properties KW - root water uptake KW - soil moisture profile KW - water distribution Y1 - 2011 U6 - https://doi.org/10.1111/j.1469-8137.2011.03826.x SN - 0028-646X VL - 192 IS - 3 SP - 653 EP - 663 PB - Wiley-Blackwell CY - Hoboken ER - TY - THES A1 - Rodriguez Piceda, Constanza T1 - Thermomechanical state of the southern Central Andes T1 - Thermomechanischer Zustand der südlichen Zentral Anden BT - implications for active deformation patterns in the transition from flat to steep subduction BT - Implikationen für aktive Deformationsmuster beim Übergang von flacher zu steiler Subduktion N2 - The Andes are a ~7000 km long N-S trending mountain range developed along the South American western continental margin. Driven by the subduction of the oceanic Nazca plate beneath the continental South American plate, the formation of the northern and central parts of the orogen is a type case for a non-collisional orogeny. In the southern Central Andes (SCA, 29°S-39°S), the oceanic plate changes the subduction angle between 33°S and 35°S from almost horizontal (< 5° dip) in the north to a steeper angle (~30° dip) in the south. This sector of the Andes also displays remarkable along- and across- strike variations of the tectonic deformation patterns. These include a systematic decrease of topographic elevation, of crustal shortening and foreland and orogenic width, as well as an alternation of the foreland deformation style between thick-skinned and thin-skinned recorded along- and across the strike of the subduction zone. Moreover, the SCA are a very seismically active region. The continental plate is characterized by a relatively shallow seismicity (< 30 km depth) which is mainly focussed at the transition from the orogen to the lowland areas of the foreland and the forearc; in contrast, deeper seismicity occurs below the interiors of the northern foreland. Additionally, frequent seismicity is also recorded in the shallow parts of the oceanic plate and in a sector of the flat slab segment between 31°S and 33°S. The observed spatial heterogeneity in tectonic and seismic deformation in the SCA has been attributed to multiple causes, including variations in sediment thickness, the presence of inherited structures and changes in the subduction angle of the oceanic slab. However, there is no study that inquired the relationship between the long-term rheological configuration of the SCA and the spatial deformation patterns. Moreover, the effects of the density and thickness configuration of the continental plate and of variations in the slab dip angle in the rheological state of the lithosphere have been not thoroughly investigated yet. Since rheology depends on composition, pressure and temperature, a detailed characterization of the compositional, structural and thermal fields of the lithosphere is needed. Therefore, by using multiple geophysical approaches and data sources, I constructed the following 3D models of the SCA lithosphere: (i) a seismically-constrained structural and density model that was tested against the gravity field; (ii) a thermal model integrating the conversion of mantle shear-wave velocities to temperature with steady-state conductive calculations in the uppermost lithosphere (< 50 km depth), validated by temperature and heat-flow measurements; and (iii) a rheological model of the long-term lithospheric strength using as input the previously-generated models. The results of this dissertation indicate that the present-day thermal and rheological fields of the SCA are controlled by different mechanisms at different depths. At shallow depths (< 50 km), the thermomechanical field is modulated by the heterogeneous composition of the continental lithosphere. The overprint of the oceanic slab is detectable where the oceanic plate is shallow (< 85 km depth) and the radiogenic crust is thin, resulting in overall lower temperatures and higher strength compared to regions where the slab is steep and the radiogenic crust is thick. At depths > 50 km, largest temperatures variations occur where the descending slab is detected, which implies that the deep thermal field is mainly affected by the slab dip geometry. The outcomes of this thesis suggests that long-term thermomechanical state of the lithosphere influences the spatial distribution of seismic deformation. Most of the seismicity within the continental plate occurs above the modelled transition from brittle to ductile conditions. Additionally, there is a spatial correlation between the location of these events and the transition from the mechanically strong domains of the forearc and foreland to the weak domain of the orogen. In contrast, seismicity within the oceanic plate is also detected where long-term ductile conditions are expected. I therefore analysed the possible influence of additional mechanisms triggering these earthquakes, including the compaction of sediments in the subduction interface and dehydration reactions in the slab. To that aim, I carried out a qualitative analysis of the state of hydration in the mantle using the ratio between compressional- and shear-wave velocity (vp/vs ratio) from a previous seismic tomography. The results from this analysis indicate that the majority of the seismicity spatially correlates with hydrated areas of the slab and overlying continental mantle, with the exception of the cluster within the flat slab segment. In this region, earthquakes are likely triggered by flexural processes where the slab changes from a flat to a steep subduction angle. First-order variations in the observed tectonic patterns also seem to be influenced by the thermomechanical configuration of the lithosphere. The mechanically strong domains of the forearc and foreland, due to their resistance to deformation, display smaller amounts of shortening than the relatively weak orogenic domain. In addition, the structural and thermomechanical characteristics modelled in this dissertation confirm previous analyses from geodynamic models pointing to the control of the observed heterogeneities in the orogen and foreland deformation style. These characteristics include the lithospheric and crustal thickness, the presence of weak sediments and the variations in gravitational potential energy. Specific conditions occur in the cold and strong northern foreland, which is characterized by active seismicity and thick-skinned structures, although the modelled crustal strength exceeds the typical values of externally-applied tectonic stresses. The additional mechanisms that could explain the strain localization in a region that should resist deformation are: (i) increased tectonic forces coming from the steepening of the slab and (ii) enhanced weakening along inherited structures from pre-Andean deformation events. Finally, the thermomechanical conditions of this sector of the foreland could be a key factor influencing the preservation of the flat subduction angle at these latitudes of the SCA. N2 - Die Anden sind eine ~7000 km lange N-S-verlaufende Hochgebirgskette, die entlang des westlichen südamerikanischen Kontinentalrandes entstanden ist. Aufgrund der Subduktion der ozeanischen Nazca-Platte unter die kontinentale südamerikanische Platte ist die Bildung des nördlichen und zentralen Teils des Gebirges typisch für eine nicht-kollisionale Orogenese. In den südlichen Zentralanden (SZA, 29-39° S) verändert sich der Subduktionswinkel der ozeanischen Platte zwischen 33 ° S und 35 ° S von fast horizontal (< 5° Einfallen) im Norden zu einem steileren Winkel (~ 30 ° Einfallen) im Süden. Begleitet wird dieser Trend von systematischen, Süd-gerichteten Abnahmen der topographischen Erhebung, der Krusteneinengung und der Vorland- und Orogenbreite, sowie von Variationen im Deformationsstil des Vorlandes, wo die Einengung des Deckgebirges in unterschiedlichem Maße von einer entsprechenden Deformation des Grundgebirges begleitet wird. . Darüber hinaus sind die SZA eine seismisch sehr aktive Region. Die Kontinentalplatte zeichnet sich durch eine relativ flache Seismizität (< 30 km Tiefe) aus, die sich hauptsächlich auf die Übergänge vom Orogen zu den Vorlandbereichen konzentriert; im Gegensatz dazu tritt tiefere Seismizität in den zentralen Bereichen des nördlichen Vorlandes auf. Darüber hinaus ist häufig auftretende Seismizität auch in den flachen Teilen der ozeanischen Platte und im Plattensegment mit flach einfallender Subduktion zwischen 31 ° S und 33 ° S festzustellen. Die beobachtete räumliche Heterogenität der tektonischen und seismischen Deformation in den SZA wurde auf mehrere Ursachen zurückgeführt, darunter Schwankungen der Sedimentmächtigkeit, das Vorhandensein vererbter Strukturen und Veränderungen des Subduktionswinkels der ozeanischen Platte. Es gibt jedoch bislang keine Studie, die den Zusammenhang zwischen der langfristigen rheologischen Konfiguration der SZA und den räumlichen Deformationsmustern untersucht hat. Darüber hinaus wurden die Auswirkungen der Dichte- und Mächtigkeitsvariationen in der kontinentalen Oberplatte und der verschiedenen Subduktionswinkel auf den rheologischen Zustand der Lithosphäre noch nicht grundlegend untersucht. Da die Rheologie von der Gesteinsart, dem Druck und der Temperatur abhängt, ist eine detaillierte Charakterisierung der Zusammensetzung, Struktur und des thermischen Feldes der Lithosphäre erforderlich. Daher habe ich unter Verwendung kombinierter Modellierungsansätze und geophysikalischer Daten die folgenden 3D Modelle für die Lithosphäre der SZA konstruiert: (i) ein auf seismischen Daten basierendes Struktur- und Dichtemodell, das anhand des beobachteten Schwerefeldes validiert wurde; (ii) ein thermisches Modell, das die Umwandlung von Mantelscherwellengeschwindigkeiten in Temperaturen mit Berechnungen des konduktiven Wärmetransports für stationäre Bedingungen in der obersten Lithosphäre (<50 km Tiefe) integriert und durch Temperatur- und Wärmeflussmessungen validiert wurde; und (iii) ein rheologisches Modell der langfristig bedingten Lithosphärenfestigkeit, das auf den zuvor erzeugten Modellen gründet. Die Ergebnisse dieser Dissertation zeigen, dass die thermischen und rheologischen Bedingungen in den heutigen SZA durch verschiedene Mechanismen in unterschiedlichen Tiefen gesteuert werden. In flachen Tiefen (< 50 km) wird das thermomechanische Feld durch die heterogene Zusammensetzung der kontinentalen Lithosphäre differenziert. Eine Überprägung durch die ozeanische Platte ist dort nachweisbar, wo die ozeanische Platte flach (< 85 km tief) und die radiogene Kruste dünn ist, was insgesamt zu niedrigeren Temperaturen und einer höheren Festigkeit im Vergleich zu Bereichen führt, in denen die Platte steil einfällt und die radiogene Kruste dick ist. In Tiefen > 50 km treten die größten Temperaturschwankungen dort auf, wo die subduzierten Platte nachgewiesen wurde, was bedeutet, dass das tiefe thermische Feld den Subduktionswinkel gesteuert wird. Die Ergebnisse dieser Doktorarbeit legen nahe, dass der langfristige thermomechanische Zustand der Lithosphäre die räumliche Verteilung rezenter Seismizität beeinflusst. Der größte Anteil innerhalb der Kontinentalplatte registrierter Erdbebentätigkeit tritt oberhalb des modellierten Übergangs von spröden zu duktilen Bedingungen auf. Außerdem besteht eine räumliche Korrelation zwischen Erdbebenclustern und den Übergängen von den mechanisch rigideren Vorlandbereichen (Forearc und Foreland) zum mechanisch schwächeren Orogen. Demgegenüber wird vermehrte Seismizität innerhalb der ozeanischen Platte auch dort nachgewiesen, wo entsprechend der Modellierung langfristig duktile Bedingungen erwartet werden. Ich habe daher den möglichen Einfluss zusätzlicher Mechanismen untersucht, die ein Auslösen dieser Erdbeben begünstigen könnten, darunter die Kompaktion von Sedimenten an der Subduktionsgrenzfläche und Dehydrationsreaktionen innerhalb der Platte. Dazu habe ich eine qualitative Analyse des Hydratationszustandes des Mantels unter Verwendung des Verhältnisses zwischen Kompressions- und Scherwellengeschwindigkeit (Vp/Vs-Verhältnis aus einemseismischen Tomographiemodell) durchgeführt. Die Ergebnisse dieser Analyse zeigen, dass der Großteil der Seismizität räumlich mit hydratisierten Bereichen in der subduzierten Platte und im darüber liegenden kontinentalen Mantel korreliert, mit Ausnahme eines Erdbebenclusters, das innerhalb des flachen Plattensegments auftritt. In diesem Bereich wechselt die subduzierte Platte von einem flachen in einen steilen Subduktionswinkel und Erdbeben werden wahrscheinlich durch Biegevorgänge in der Platte ausgelöst. Auch die wichtigsten Variationen in den beobachteten tektonischen Mustern scheinen durch die thermomechanische Konfiguration der Lithosphäre beeinflusst zu sein. Die mechanisch starken Bereiche von Forearc und Foreland zeigen aufgrund ihrer Verformungsbeständigkeit geringere Verkürzungsraten als der relativ schwache Bereich des Orogens. Darüber hinaus bestätigen die in dieser Dissertation modellierten strukturellen und thermomechanischen Eigenschaften der Lithosphäre auch frühere Analysen geodynamischer Simulationen, denen zufolge der Deformationsstil im Orogen- und Vorlandbereich jeweils von Variationen in der Lithosphären- und Krustendicke, im Vorhandensein schwacher Sedimente und in der gravitativen potentiellen Energie kontrolliert wird. Eine Sonderstellung nimmt der nordöstliche Vorlandbereich der SZA ein, wo eine verstärkte Seismizität und eine das Deck-und Grundgebirge erfassende Deformation zu beobachten sind, obwohl die modellierte Krustenfestigkeit dort Werte übersteigt, die für die in diesem Gebiet anzunehmenden tektonischen Spannungen typisch wären. . Mechanismen zur Lokalisierung verstärkter Deformation in einem Gebiet beitragen können, das nach den vorliegenden Modellen einer tektonischen Verformung widerstehen sollte, sind: (i) erhöhte tektonische Kräfte durch ein steileres Abtauchen der Platte und (ii) Schwächezonen in der Kruste, die auf prä-andine Deformationsereignisse zurückgehen. Schließlich könnten die thermomechanischen Bedingungen in diesem Teil des Vorlands einchlüsselfaktor für die Erhaltung des flachen Subduktionswinkels in diesen Breiten der SZA sein. KW - Andes KW - Anden KW - subduction KW - Subduktion KW - lithosphere KW - Lithosphäre KW - earthquakes KW - Erdbeben KW - modelling KW - Modellierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-549275 ER - TY - JOUR A1 - Ayzel, Georgy A1 - Heistermann, Maik T1 - The effect of calibration data length on the performance of a conceptual hydrological model versus LSTM and GRU BT - a case study for six basins from the CAMELS dataset JF - Computers & geosciences : an international journal devoted to the publication of papers on all aspects of geocomputation and to the distribution of computer programs and test data sets ; an official journal of the International Association for Mathematical Geology N2 - We systematically explore the effect of calibration data length on the performance of a conceptual hydrological model, GR4H, in comparison to two Artificial Neural Network (ANN) architectures: Long Short-Term Memory Networks (LSTM) and Gated Recurrent Units (GRU), which have just recently been introduced to the field of hydrology. We implemented a case study for six river basins across the contiguous United States, with 25 years of meteorological and discharge data. Nine years were reserved for independent validation; two years were used as a warm-up period, one year for each of the calibration and validation periods, respectively; from the remaining 14 years, we sampled increasing amounts of data for model calibration, and found pronounced differences in model performance. While GR4H required less data to converge, LSTM and GRU caught up at a remarkable rate, considering their number of parameters. Also, LSTM and GRU exhibited the higher calibration instability in comparison to GR4H. These findings confirm the potential of modern deep-learning architectures in rainfall runoff modelling, but also highlight the noticeable differences between them in regard to the effect of calibration data length. KW - Artificial neural networks KW - Calibration KW - Deep learning KW - Rainfall-runoff KW - modelling Y1 - 2021 U6 - https://doi.org/10.1016/j.cageo.2021.104708 SN - 0098-3004 SN - 1873-7803 VL - 149 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Raatz, Michael T1 - Strategies within predator-prey interactions – from individuals to ecosystems T1 - Strategien in Räuber-Beute Interaktionen – vom Individuum bis zum Ökosystem N2 - Predator-prey interactions provide central links in food webs. These interaction are directly or indirectly impacted by a number of factors. These factors range from physiological characteristics of individual organisms, over specifics of their interaction to impacts of the environment. They may generate the potential for the application of different strategies by predators and prey. Within this thesis, I modelled predator-prey interactions and investigated a broad range of different factors driving the application of certain strategies, that affect the individuals or their populations. In doing so, I focused on phytoplankton-zooplankton systems as established model systems of predator-prey interactions. At the level of predator physiology I proposed, and partly confirmed, adaptations to fluctuating availability of co-limiting nutrients as beneficial strategies. These may allow to store ingested nutrients or to regulate the effort put into nutrient assimilation. We found that these two strategies are beneficial at different fluctuation frequencies of the nutrients, but may positively interact at intermediate frequencies. The corresponding experiments supported our model results. We found that the temporal structure of nutrient fluctuations indeed has strong effects on the juvenile somatic growth rate of {\itshape Daphnia}. Predator colimitation by energy and essential biochemical nutrients gave rise to another physiological strategy. High-quality prey species may render themselves indispensable in a scenario of predator-mediated coexistence by being the only source of essential biochemical nutrients, such as cholesterol. Thereby, the high-quality prey may even compensate for a lacking defense and ensure its persistence in competition with other more defended prey species. We found a similar effect in a model where algae and bacteria compete for nutrients. Now, being the only source of a compound that is required by the competitor (bacteria) prevented the competitive exclusion of the algae. In this case, the essential compounds were the organic carbon provided by the algae. Here again, being indispensable served as a prey strategy that ensured its coexistence. The latter scenario also gave rise to the application of the two metabolic strategies of autotrophy and heterotrophy by algae and bacteria, respectively. We found that their coexistence allowed the recycling of resources in a microbial loop that would otherwise be lost. Instead, these resources were made available to higher trophic levels, increasing the trophic transfer efficiency in food webs. The predation process comprises the next higher level of factors shaping the predator-prey interaction, besides these factors that originated from the functioning or composition of individuals. Here, I focused on defensive mechanisms and investigated multiple scenarios of static or adaptive combinations of prey defense and predator offense. I confirmed and extended earlier reports on the coexistence-promoting effects of partially lower palatability of the prey community. When bacteria and algae are coexisting, a higher palatability of bacteria may increase the average predator biomass, with the side effect of making the population dynamics more regular. This may facilitate experimental investigations and interpretations. If defense and offense are adaptive, this allows organisms to maximize their growth rate. Besides this fitness-enhancing effect, I found that co-adaptation may provide the predator-prey system with the flexibility to buffer external perturbations. On top of these rather internal factors, environmental drivers also affect predator-prey interactions. I showed that environmental nutrient fluctuations may create a spatio-temporal resource heterogeneity that selects for different predator strategies. I hypothesized that this might favour either storage or acclimation specialists, depending on the frequency of the environmental fluctuations. We found that many of these factors promote the coexistence of different strategies and may therefore support and sustain biodiversity. Thus, they might be relevant for the maintenance of crucial ecosystem functions that also affect us humans. Besides this, the richness of factors that impact predator-prey interactions might explain why so many species, especially in the planktonic regime, are able to coexist. N2 - Organismen interagieren miteinander und mit ihrer Umwelt. Innerhalb dieses Netzwerks von Interaktionen sind Fraßbeziehungen zwischen Räubern und ihrer Beute von zentraler Bedeutung. Sie werden auf verschiedenen Ebenen von unterschiedlichen Faktoren beeinflusst, was zur Ausprägung von diversen Strategien von Räuber oder Beute führen kann. Diese Faktoren und die Strategien die sie hervor bringen sind Gegenstand dieser Doktorarbeit. In mehreren Modellierungsstudien habe ich vielseitige Faktoren untersucht, die sich dem Aufbau einzelner Organismen, Verteidigungs- und Angriffsmechanismen sowie Umwelteinflüssen zuordnen lassen. Dabei konzentrierte ich mich auf ein etabliertes Modellsystem zur Erforschung von Räuber-Beute-Dynamiken und untersuchte die Fraßbeziehung zwischen Phytoplankton als Beute und Zooplankton als Räuber. Ich fand heraus, dass die Bereitstellung von essentiellen Ressourcen für Konkurrenten oder Räuber eine Strategie sein kann, mit der Beutearten sich vor dem Aussterben schützen können. Auch die direkte Verteidigung gegen den Räuber ist eine häufige Strategie zur Verringerung des Fraßdrucks und kann ebenfalls Koexistenz fördern. Für anpassungsfähige Verteidigung der Beute und Angriffsstärke des Räubers konnte ich zeigen, dass dies sowohl die Fitness erhöhen, als auch die Robustheit der Räuber-Beute-Dynamiken gegen äußere Störungen erhöhen kann. Weiterhin fand ich heraus, dass physiologische Anpassungsmechanismen wie Speicherung oder anpassungsfähige Aufnahme von Nährstoffen die Wachstumsrate des Räubers verbessern können, wenn die Qualität der verfügbaren Beute in der Umwelt des Räubers fluktuiert. Viele der Strategien, die ich in dieser Arbeit herausgestellt habe, können die Koexistenz von verschiedenen Arten fördern und damit zu erhöhter Biodiversität beitragen, welche wiederum entscheidend ist für die Stabilität von Ökosystemen und deren Nutzbarkeit. KW - predator-prey KW - biodiversity KW - modelling KW - Räuber-Beute KW - Biodiversität KW - Modellierung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426587 ER - TY - THES A1 - Mamede, George Leite T1 - Reservoir sedimentation in dryland catchments : modelling and management N2 - Semi-arid environments are mainly characterized by scarce water resources and are usually subject to risks of water stress. In these regions, water supply for drinking and irrigation purposes depends strongly on storage in surface reservoirs and sediment deposition in these reservoirs affects adversely the water storage. In order to reproduce the complex behaviour of sediment deposition in reservoirs located in semi-arid environments and the effects of using sediment management techniques, a reservoir sedimentation model is developed and coupled within the WASA-SED model, which simulates rainfall-runoff processes and sediment transport at the hillslope and river network. The reservoir sedimentation model consists of two modelling approaches, which may be applied according to reservoir size and data availability. For reservoirs with information about their geometric features (reservoir topography, stage-area and stage-volume curves) and physical properties of sediment deposits, such as deposition thickness, grain size distribution of sediment deposits and sediment densities, a detailed modelling approach of reservoir sedimentation may be applied. For reservoirs without those characteristics, a simplified modelling approach is used. The detailed modelling approach of reservoir sedimentation enables the assessment of sediment deposition pattern in reservoirs and the evaluation of sediment release efficiency of sediment management techniques. It simulates sediment transport along the longitudinal profile of a reservoir. The reservoir is divided into cross sections to elaborate the sediment budget. The sediment transport component is calculated using a non-uniform sediment transport approach based on the concept of sediment carrying capacity. Four different sediment-transport equations can be selected for the simulations. The simplified modelling approach of reservoir sedimentation is suitable to simulate water and sediment transfer in dense reservoirs network. Nevertheless, it allows simulating neither sediment management techniques, nor spatial distribution of sedimentation. In this approach, the reservoirs are classified into small and strategic reservoirs according to their location and size. Strategic reservoirs are medium and large-sized reservoirs located on main rivers at the sub-basin’s outlet or reservoirs of particular interest. The small reservoirs are located at tributary streams and represented in the model in an aggregate manner by grouping them into size classes according to their storage capacity. A cascade routing scheme is used to describe the upstream-downstream position of the reservoir classes. The water and sediment balances of small reservoirs are computed for one hypothetical representative reservoir of mean characteristics. Sediment trapping efficiency and effluent grain size distribution are estimated using the overflow rate concept. Three model applications are carried out within this research, as follows: • The detailed modelling approach of reservoir sedimentation is applied to the 92.2 Mm³ Barasona Reservoir, located in the foothills of the Central Pyrenees (Aragon, Spain). A two-stage calibration was performed to account for changes on the sediment deposition pattern caused by sediment management. The reservoir sedimentation model is then validated for another simulation period which confirms that the processes related to reservoir sedimentation are well represented by the model. • An application is carried out to the 933-km² Benguê catchment, located in the semi-arid region of Northeast Brazil. The catchment is characterized by a dense reservoir network, covering almost 45% of the catchment area, with a significant lack of data. Water and sediment balances of those reservoirs are computed using the simplified modelling approach. Three spatial configurations describing the cascade routing scheme are tested. • The reservoir sedimentation model is applied again to the Barasona reservoir to evaluate the sediment release efficiency of sediment management strategies. Cost analysis is presented to help in the choice of the most promising sediment management technique for that situation. Thus, the model enables the assessment of technical features of the sediment management strategies. Overall, simulation results are characterized by large uncertainties, partly due to low data availability and also due to uncertainties of the model structure to adequately represent the processes related to reservoir sedimentation. N2 - Semiaride Gebiete sind hauptsächlich durch geringe Wasserressourcen gekennzeichnet und unterliegen häufig dem Risiko der Wasserknappheit. In diesen Gebieten ist die Wasserbereitstellung für Bewässerung und Trinkwasserversorgung stark von der oberflächlichen Speicherung in Stauseen abhängig, deren Wasserverfügbarkeit nachteilig durch Sedimentablagerung beeinflusst wird. Zur Wiedergabe des komplexen Sedimentablagerungsverhaltens in Stauseen von semiariden Gebieten und die Auswirkungen von Sedimentmanagementmaßnahmen wird ein Sedimentationsmodell entwickelt und mit dem WASA-SED Modell gekoppelt, das für die Modellierung der Abflussbildung und des Sedimenttransportes in Einzugsgebieten geeignet ist. Das Sedimentationsmodell beinhaltet zwei Ansätze, die unter der Berücksichtigung verschiedener Stauseengrößenklassen und Datenverfügbarkeit eingesetzt werden können. Für die Stauseen mit verfügbaren Informationen über ihre geometrischen Eigenschaften (wie Stauseetopographie und Höhe-Fläche-Volumen-Beziehung) und weitere Kenngrößen wie Ablagerungsmächtigkeit, Korngrößenverteilung und Sedimentdichte, kann ein detaillierter Modellansatz für die Sedimentablagerung verwendet werden. Wo diese Informationen nicht verfügbar sind, wird auf einen vereinfachten Ansatz zurückgegriffen. Der detaillierte Modellansatz ermöglicht die Betrachtung von Ablagerungsmustern im Stausee und Einschätzungen über die Effektivität von Sedimentmanagementmaßnahmen hinsichtlich der Sedimententlastung. Dieser Ansatz beruht auf der Simulation des Sedimenttransportes entlang eines Stauseelängsprofils. Für die Berechnung des Sedimenttransfers wird der Stauseekörper in einer Folge von Querprofilen repräsentiert. Der Sedimenttransport wird dabei korngrößenspezifisch entsprechend der Transportkapazität berechnet. Dafür stehen vier verschiedenen Sedimenttransportgleichungen zur Verfügung. Der vereinfachte Modellansatz ist für die Simulation des Sedimenttransfers in Gebieten mit hoher Stauseedichte geeignet, jedoch können weder Sedimentmanagementmaßnahmen noch die räumliche Verteilung der Ablagerungen berücksichtigt werden. Dafür werden die Stauseen in Abhängigkeit von ihrer Größe und Position in kleine und strategische Stauseen unterteilt. Dabei sind strategische Stausseen solche mit mittlerem bis großem Volumen sowie einer Lage im Hauptgerinne oder solche mit sonstiger besonderer Bedeutung. Kleine Stauseen hingegen befinden sich an den Nebenflüssen und werden im Modell in aggregierter Form durch ihre Einteilung in Stauseegrößenklassen repräsentiert. Ein Kaskadenverfahren wird für den Wasser- und Sedimentlauf zwischen den Stauseeklassen verwendet. Dabei werden für jede Stauseeklasse der Wasser- sowie Sedimenthaushalt für einen hypothetischen repräsentativen Stausee mit mittleren Eigenschaften berechnet. Die Sedimentaufnahme und die Korngrößenverteilung des abgegebenen Sediments werden mit dem Überlaufanteil-Ansatz berechnet. In dieser Studie werden drei Modellanwendungen vorgestellt: • Für den 92,2 Mio.m³-großen Barasona-Stausee (Vorland der Zentralpyrenäen, Aragon, Spanien) wird die Modellierung der Sedimentablagerung mit dem detaillierten Modellansatz vorgenommen. Die Kalibrierung dafür wurde in zwei Schritten durchgeführt, um Änderungen im Stauseemanagement Rechnung zu tragen. Die ModellValidierung wird schließlich für eine andere Simulationsperiode vorgenommen. Dabei wird ersichtlich, dass die Prozesse der Sedimentablagerung gut durch das Modell wiedergegeben werden. • Das Modell wird auf das 933 km²-große Benguê-Einzugsgebiet, das sich im semiariden Nordosten Brasiliens befindet, angewendet. Dieses Einzugsgebiet ist durch eine hohe Dichte an kleinen Stauseen, charakterisiert, die fast 45% des Gebietes umfasst, wofür jedoch wenige Messdaten verfügbar sind. Deshalb werden der Wasser- und Sedimenttransport mit dem vereinfachten Modellansatz berechnet. Dabei werden drei Konfigurationen des Kaskadenverfahrens getestet. • Die Modellanwendung erfolgt erneut für den Barasona-Stausee bezüglich der Effektivität der Sedimentmanagementmaßnahmen. Eine Kostenanalyse ermöglicht die Auswahl geeigneter Maßnahmen für den Stausee. Dadurch wird eine Beurteilung der verschiedenen Sedimentmanagementstrategien ermöglicht. Im Allgemeinen unterliegen die Simulationsergebnisse großen Unsicherheiten, teilweise wegen der geringen Datenverfügbarkeit, andererseits durch die Unsicherheiten in der Modellstruktur zur korrekten Wiedergabe der Sedimentablagerungsprozesse. T2 - Verlandung von Stauseen in semiariden Gebieten : Modellierung und Management KW - Sedimentation KW - semiarides Gebiet KW - Sedimenttransport KW - reservoir sedimentation KW - sediment management KW - modelling KW - dryland catchments KW - sediment transport Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17047 ER - TY - JOUR A1 - van Schaik, N. Loes M. B. A1 - Bronstert, Axel A1 - de Jong, S. M. A1 - Jetten, V. G. A1 - van Dam, J. C. A1 - Ritsema, C. J. A1 - Schnabel, Susanne T1 - Process-based modelling of a headwater catchment in a semi-arid area: the influence of macropore flow JF - Hydrological processes N2 - Subsurface stormflow is thought to occur mainly in humid environments with steep terrains. However, in semi-arid areas, preferential flow through macropores can also result in a significant contribution of subsurface stormflow to catchment runoff for varying catchment conditions. Most hydrological models neglect this important subsurface preferential flow. Here, we use the process-oriented hydrological model Hillflow-3D, which includes a macropore flow approach, to simulate rainfall-runoff in the semi-arid Parapunos catchment in Spain, where macropore flow was observed in previous research. The model was extended for this study to account for sorptivity under very dry soil conditions. The results of the model simulations with and without macropore flow are compared. Both model versions give reasonable results for average rainfall situations, although the approach with the macropore concept provides slightly better results. The model results for scenarios of extreme rainfall events (>13.3mm30min(-1)) however show large differences between the versions with and without macropores. These model results compared with measured rainfall-runoff data show that the model with the macropore concept is better. Our conclusion is that preferential flow is important in controlling surface runoff in case of specific, high intensity rainfall events. Therefore, preferential flow processes must be included in hydrological models where we know that preferential flow occurs. Hydrological process models with a less detailed process description may fit observed average events reasonably well but can result in erroneous predictions for more extreme events. Copyright (c) 2013 John Wiley & Sons, Ltd. KW - process based KW - macropore flow KW - catchment scale KW - modelling KW - semi-arid area Y1 - 2014 U6 - https://doi.org/10.1002/hyp.10086 SN - 0885-6087 SN - 1099-1085 VL - 28 IS - 24 SP - 5805 EP - 5816 PB - Wiley-Blackwell CY - Hoboken ER - TY - THES A1 - Fuhrmann, Saskia T1 - Physiologically-based pharmacokinetic and mechanism-based pharmacodynamic modelling of monoclonal antibodies with a focus on tumour targeting T1 - Physiologie-basierte pharmakokinetische und mechanistische pharmakodynamische Modellierung von monoklonalen Antikörpern mit Fokus auf zielgerichtete Tumortherapie N2 - Monoclonal antibodies (mAbs) are an innovative group of drugs with increasing clinical importance in oncology, combining high specificity with generally low toxicity. There are, however, numerous challenges associated with the development of mAbs as therapeutics. Mechanistic understanding of factors that govern the pharmacokinetics (PK) of mAbs is critical for drug development and the optimisation of effective therapies; in particular, adequate dosing strategies can improve patient quality life and lower drug cost. Physiologically-based PK (PBPK) models offer a physiological and mechanistic framework, which is of advantage in the context of animal to human extrapolation. Unlike for small molecule drugs, however, there is no consensus on how to model mAb disposition in a PBPK context. Current PBPK models for mAb PK hugely vary in their representation of physiology and parameterisation. Their complexity poses a challenge for their applications, e.g., translating knowledge from animal species to humans. In this thesis, we developed and validated a consensus PBPK model for mAb disposition taking into account recent insights into mAb distribution (antibody biodistribution coefficients and interstitial immunoglobulin G (IgG) pharmacokinetics) to predict tissue PK across several pre-clinical species and humans based on plasma data only. The model allows to a priori predict target-independent (unspecific) mAb disposition processes as well as mAb disposition in concentration ranges, for which the unspecific clearance (CL) dominates target-mediated CL processes. This is often the case for mAb therapies at steady state dosing. The consensus PBPK model was then used and refined to address two important problems: 1) Immunodeficient mice are crucial models to evaluate mAb efficacy in cancer therapy. Protection from elimination by binding to the neonatal Fc receptor is known to be a major pathway influencing the unspecific CL of both, endogenous and therapeutic IgG. The concentration of endogenous IgG, however, is reduced in immunodeficient mouse models, and this effect on unspecific mAb CL is unknown, yet of great importance for the extrapolation to human in the context of mAb cancer therapy. 2) The distribution of mAbs into solid tumours is of great interest. To comprehensively investigate mAb distribution within tumour tissue and its implications for therapeutic efficacy, we extended the consensus PBPK model by a detailed tumour distribution model incorporating a cell-level model for mAb-target interaction. We studied the impact of variations in tumour microenvironment on therapeutic efficacy and explored the plausibility of different mechanisms of action in mAb cancer therapy. The mathematical findings and observed phenomena shed new light on therapeutic utility and dosing regimens in mAb cancer treatment. N2 - Monoklonale Antikörper (mAK) stellen durch ihre hohe Spezifität und geringe Toxizität eine innovative Arzneistoffklasse mit großer klinischer Bedeutung in der Krebstherapie dar. Es gibt jedoch eine Vielzahl an Herausforderungen, die mit der Entwicklung von mAK als Krebstherapeutika verbunden sind. Mechanistisches Verständnis der Pharmakokinetik (PK) von mAK ist wichtig für die Arzneimittelentwicklung sowie für die Therapieoptimierung. Adäquate Dosierungsstrategien können die Lebensqualität der Patienten erhöhen und die Gesundheitskosten senken. Physiologie-basierte PK (PBPK) Modelle bieten einen physiologischen und mechanistischen Rahmen für die Extrapolation von Tiermodellen auf den Menschen. Im Gegensatz zu kleinen chemischen Molekülen besteht für die PBPK Modellierung von mAK kein Konsens: Aktuelle Modelle unterscheiden sich stark hinsichtlich Physiologie und deren Parameterisierung. Die Komplexität dieser Modelle stellt eine große Herausforderung für ihre Anwendung dar. In der vorliegenden Arbeit entwickelten und validierten wir ein Konsens-PBPK-Modell für die mAK Disposition. Dabei wurden aktuelle Erkenntnisse zur mAK Verteilung berücksichtigt, um basierend auf Plasmadaten Vorhersagen für die PK im Gewebe verschiedener präklinischer sowie klinischer Spezies zu treffen. Das Modell erlaubt a priori Vorhersagen für die unspezifische (target-unabhängige) mAK Disposition als auch für die mAK Disposition in einem Konzentrationsbereich, für den die unspezifische Clearance (CL) die target-abhängige CL dominiert. Dies ist oft der Fall für mAK Therapien bei Steady-state-Dosierung. Anschließend wurde das Konsens-PBPK-Modell genutzt und verfeinert, um zwei wichtige Aspekte näher zu untersuchen: 1) Immundefiziente Mäuse sind wichtige Tiermodelle für die Evaluierung der mAK Wirksamkeit in der Tumortherapie. Die Bindung von Antikörpern an den neonatalen Fc Rezeptor schützt diese vor dem Abbau und beeinflusst somit maßgeblich die unspezifische CL von endogenen sowie therapeutischen Antikörpern. Die Konzentration von endogenem IgG in immundefizienten Mäusen ist reduziert. Dieser Effekt auf die unspezifische mAK CL ist unbekannt, jedoch wichtig für die Extrapolation auf den Menschen in der mAK Tumortherapie. 2) Die Verteilung von mAK innerhalb eines soliden Tumors ist von großer Bedeutung. Für die umfassende Untersuchung der mAK Verteilung innerhalb des Tumorgewebes wurde das Konsens-PBPK-Modell um ein detailliertes Tumor-Verteilungsmodell, welches die mAK-Target Interaktion auf Zellebene berücksichtigt, erweitert. Wir untersuchten den Einfluss von Variationen in der Tumor-Mikroumgebung auf die klinische Wirksamkeit von mAK und untersuchten die Plausibilität verschiedener Wirkmechanismen in der mAK Tumortherapie. Die mathematischen Ergebnisse sowie beobachteten Phänomene werfen ein neues Licht auf den therapeutischen Nutzen sowie Dosierungsschemata in der mAK Krebstherapie. KW - PBPK KW - monoclonal antibodies KW - modelling KW - PBPK KW - monoklonale Antikörper KW - Modellierung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418861 ER - TY - THES A1 - Hudjetz, Annekatrin T1 - Modelllernen im Ernährungskontext : mütterlicher und väterlicher Einfluss auf die Ernährung adipöser Kinder T1 - Observational learning and diet : maternal and paternal influence on the diet of obese children N2 - Adipositas ist eine chronische Erkrankung mit erheblichen Komorbiditäten und Folgeschäden, die bereits im Kindes- und Jugendalter weit verbreitet ist. Unterschiedliche Faktoren sind an der Ätiologie dieser Störung beteiligt. Die Ernährung stellt dabei eine der Hauptsäulen dar, auf welche immer wieder Bezug genommen wird. Der Einfluss der Eltern auf die kindliche Ernährung spielt unbestritten eine zentrale Rolle – hinsichtlich genetischer Dispositionen, aber auch als Gestalter der Lebensumwelten und Vorbilder im Ernährungsbereich. Die vorliegende Arbeit hat zum Ziel, Übereinstimmungen elterlicher und kindlicher Ernährung zu untersuchen und dabei zu prüfen, inwiefern Prozesse des Modelllernens für die Zusammenhänge verantwortlich zeichnen. Grundlage ist die sozial-kognitive Theorie Albert Banduras mit dem Fokus auf seinen Ausführungen zum Beobachtungs- oder Modelllernen. Die Zusammenhänge elterlicher und kindlicher Ernährung wurden anhand einer Stichprobe 7 – 13-jähriger adipöser Kinder und ihrer Eltern in Beziehung gesetzt zu den Bedingungen des Modelllernens, die zuvor auch in anderen Studien gefunden worden waren. Eine hohe Ähnlichkeit oder gute Beziehung zwischen Modell (Mutter bzw. Vater) und Lernendem (Kind) sollte demnach moderierend auf die Stärke des Zusammenhangs wirken. Aus Banduras Ausführungen zu den Phasen des Modelllernens ergibt sich zudem ein dritter Aspekt, der in das Untersuchungsmodell einbezogen wurde. Die von Bandura postulierte Aneignungsphase setzt voraus, dass das zu lernende Verhalten auch beobachtet werden kann. Aus diesem Grund sollte die Analyse von Zusammenhängen im Verhalten nicht losgelöst von der Zeit betrachtet werden, die Modell und Beobachter miteinander verbringen bzw. verbracht haben. Zudem wurde die Wahrnehmung eines Elternteils als Vorbild beim Kind erfragt und als Moderator aufgenommen. In die Analysen eingeschlossen wurden vollständige Mutter-Vater-Kind-Triaden. Im Querschnitt der Fragebogenerhebung waren die Daten von 171 Mädchen und 176 Jungen, in einem 7 Monate darauf folgenden Längsschnitt insgesamt 75 Triaden (davon 38 Mädchen) enthalten. Es zeigte sich ein positiver Zusammenhang zwischen der kindlichen und mütterlichen Ernährung ebenso wie zwischen der kindlichen und väterlichen Ernährung. Die Übereinstimmungen zwischen Mutter und Kind waren größer als zwischen Vater und Kind. Überwiegend bestätigt werden konnten der moderierende Einfluss der Beziehungsqualität und der Vorbildwahrnehmung auf die Zusammenhänge elterlicher und kindlicher gesunder Ernährung und der Einfluss gemeinsam verbrachter Zeit vor allem in Bezug auf Vater-Kind-Zusammenhänge problematischer Ernährung. Der väterliche Einfluss, der sowohl in Studien als auch in präventiven oder therapeutischen Angeboten oft noch vernachlässigt wird und in vorliegender Arbeit besondere bzw. gleichberechtigte Beachtung fand, zeigte sich durch den Einbezug moderierender Variablen verstärkt. Eine Ansprache von Müttern und Vätern gleichermaßen ist somit unbedingtes Ziel bei der Prävention und Therapie kindlicher Adipositas. Auch jenseits des Adipositaskontextes sollten Eltern für die Bedeutung elterlicher Vorbildwirkung sensibilisiert werden, um eine gesunde Ernährungsweise ihrer Kinder zu fördern. N2 - Obesity is a chronic illness common even in childhood and adolescence. It increases the risk of severe mental and physical conditions. The aetiology of the illness is diverse. Diet is one of the main factors linked to obesity. Parental influence on children’s diet has been frequently demonstrated. Parents play a crucial role, not only with regard to genetic disposition, but also by influencing the availability and accessibility of food and by serving as role models. This thesis focuses on the parent-child-correlations for diet. In a sample of obese children between the ages of 7 and 13 years, these correlations were applied to modelling processes based on the social-cognitive theory of Albert Bandura. Former studies have found the similarity or quality of the relationship between a model (mother or father) and an observer (child) to be among the factors influencing modelling. These factors are said to moderate the correlation between parents’ and children’s diet. Moreover, since behaviour has to be observed in what Bandura calls the ‘attention stage’, time spent together between model and observer is likewise considered important. The children’s perception of the parent acting as a role model was used as another potential moderator. Only complete sets of mother-father-child-triads were used for the analyses. Cross-sectional questionnaire data was gathered from 171 girl triads and 176 boy triads. A follow-up study, conducted 7 months after the first interview, resulted in 75 triads (of which 38 girl triads). Positive correlations were found between both child and mother and child and father. The mother-child-correlations were stronger than those between father and child. Moderator analyses predominantly revealed that the parent-child relationship and the perceived role model had a moderating effect on these correlations. In father-child-correlations where diet was problematic, the influence of the time parent and child spent together was found to be particularly strong. The father’s role, frequently neglected in obesity prevention and therapy, was clearly demonstrated when moderating factors were taken into account. Hence, addressing mothers and fathers and sensitising them to their function as models is essential – not only in the context of obesity, but also when targeting healthy nutrition in all children. KW - Adipositas KW - Ernährung KW - Eltern KW - Kinder KW - Modelllernen KW - obesity KW - diet KW - parents KW - children KW - modelling Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72336 ER - TY - JOUR A1 - Markowska, Monika A1 - Fohlmeister, Jens Bernd A1 - Treble, Pauline C. A1 - Baker, Andy A1 - Andersen, Martin S. A1 - Hua, Quan T1 - Modelling the C-14 bomb-pulse in young speleothems using a soil carbon continuum model JF - Geochimica et cosmochimica acta : journal of the Geochemical Society and the Meteoritical Society N2 - The ‘bomb-pulse’ method is a chronological approach to further constrain the age of speleothems that grew between 1950 CE – present. Establishing dependable chronological constraints is crucial for modern calibration studies of speleothems to instrumental climate records, which provides the basis for paleoclimate interpretations. However, a large unknown is how 14C is transferred from the atmosphere to any individual speleothem owing to the site-specific residence times of organic matter above cave systems. Here, we employ the bomb-pulse method to build chronologies from 14C measurements in combination with a new unsaturated zone C model which considers C decomposition as a continuum, to better understand unsaturated zone 14C dynamics. The bomb-pulse curves of eight speleothems from southern Australia in three contrasting climatic regions; the semi-arid Wellington Caves site, the mediterranean Golgotha Cave site and the montane Yarrangobilly Caves site, are investigated. Overall, the modelled 14C bomb-pulse curves produce excellent fits with measured 14C speleothem data (r2 = 0.82–0.99). The C modelling reveals that unsaturated zone C is predominately young at the semi-arid site, with a weighted-mean residence time of 32 years and that tree root respiration is likely an important source of vadose CO2. At the montane site, ∼39% of C is young (<1 years), but the weighted-mean C ages are older (145–220 years). The mediterranean site has very little contribution from young C (<12%: 0–1 years), with weighted-mean ages between 157 and 245 years, likely due to greater adsorption of organic matter in the upper vadose zone during matrix flow, and remobilisation of C from young syngenetic karst. New end members for low speleothem Dead Carbon Proportion (DCP) are identified (2.19% and 1.65%, respectively) for Australian montane and semi-arid zone speleothems, where oversupply of modern CO2 in the vadose zone leads to lower DCP. It is also demonstrated that DCP can be quite variable over small time scales, that processes may be difficult to untangle and a constant DCP assumption is likely invalid. DCP variability over time is mainly controlled by the changes vadose zone CO2, where vegetation regeneration, wild-fires and karst hydrology play an important role. KW - Carbon 14 KW - speleothems KW - vadose zone KW - modelling Y1 - 2019 U6 - https://doi.org/10.1016/j.gca.2019.04.029 SN - 0016-7037 SN - 1872-9533 VL - 261 SP - 342 EP - 367 PB - Elsevier CY - Oxford ER - TY - THES A1 - Schröder, Sarah T1 - Modelling surface evolution coupled with tectonics T1 - Modellierung von Oberflächenprozessen gekoppelt mit Tektonik BT - A case study for the Pamir BT - Eine Fallstudie zum Pamir N2 - This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west. N2 - Im Rahmen dieser Studie werden 1D und 2D Erosionsmodelle im Gebirgsmaßstab implementiert und mit Modellen für tektonische Deformation gekoppelt. Die Kopplungsmethode erlaubt unterschiedlich räumliche und zeitliche Auflösungen im tektonischen und im Erosionsmodell. Es werden sowohl vertikale als auch horizontale Bewegungen zwischen den Modellen transferiert. Darüber hinaus enthält die Kopplungsmethode ein Glättungsverfahren, um eventuelle Instabilitäten des tektonischen Modelles zu kompensieren. Beide Erosionsmodelle beziehen Hangerosion, Flusseinschneidung und Sedimentation ein. Der 1D Code nutzt Hack's Law, um die Wassermengen zu berechnen. Er garantiert Massenerhaltung, indem er Sedimente in Senken speichert. Das 2D Erosionsmodell DANSER basiert auf einem zellulären Automaten. Ein zusätzlicher steigungsabhängiger Faktor erweitert lineare zu nichtlinearer Diffusion. Wassermengen werden mit Hilfe des D8-Algorithmus und einer veränderten Form von O'Callaghans (1984) Algorithmus akkumuliert. Laterale Einschneidung, berechnet durch einen neuen Verteilungs-Algorithmus, verbessert die Modellierung von Flusssystemen. Flüsse sind dabei repräsentiert durch eine unterschiedliche Anzahl an Zellen orthogonal zur Fließrichtung. Ihre Breite wird nach empirischen Gesetzen ermittelt. Die präsentierten Anwendungen dienen der Studie des Pamirgebirges. Zunächst werden die Modellparameter anhand von Einschneidungs- und Erosionsraten sowie Sedimentdurchflüssen kalibriert. Ein digitales Höhenmodell dient als Anfangstopographie und zur Extraktion von Flussprofilen. Laterale Einschneidung zeigt eine deutliche Verbesserung zu bisher vorhandenen Modellen. Sie ermöglicht die Erhaltung der Flussbreite und zeigt hohe Einschneidungsraten in engen Flusspassagen. Modelle von Flussanzapfungen in einem System paralleler Verwerfungen bestätigen die Wichtigkeit von lateraler Einschneidung für Flussanzapfungsmodelle, die Hangerosion einbeziehen. Während die Modelle eine geringe Wahrscheinlichkeit von Flussanzapfungen mit hohem Ablenkungswinkel zeigen, belegen sie auch, dass deren (allgemeine) Wahrscheinlichkeit direkt von der Hebungsrate der Verwerfungen abhängt. Die Erodibilität beschleunigt lediglich die Geschwindigkeit von Flussanzapfungen. Ein Modell, das die Codes SLIM 3D und DANSER koppelt, dokumentiert die vielseitige Verwendbarkeit des neuen Codes: Es zeigt einen geringen Einfluss von Oberflächenprozessen auf die Lithosphärendeformation, während die Sedimentationsroutine erheblich auf spröde Oberflächendeformationen einwirkt. Das Modell legt nahe, dass Sedimentation ein zwischen zwei entstehenden Gebirgen gelegenes Becken weitet. Außerdem weitet sich der südlich von der interkontinentalen Kollisionszone gelegene Teil des Gebirge-Models ebenfalls durch Sedimentation. KW - erosion KW - coupling KW - SEC KW - surface evolution KW - thermo-mechanics KW - surface processes KW - DANSER KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - tectonics KW - modelling KW - modeling KW - numerical model KW - simulation KW - surface KW - fluvial incision KW - hillslope diffusion KW - finite differences KW - finite elements KW - Eulerian grid KW - DANSER KW - DANSER KW - Erosion KW - Modellierung KW - Tektonik KW - Koppelung KW - SEC KW - numerische Modellierung KW - Oberflächenprozesse KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - Tiefendeformation KW - Software KW - Simulation KW - Oberfläche KW - fluviale Einschneidung KW - Hangerosion KW - finite Differenzen KW - finite Elemente KW - Eulerische Gitter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90385 ER - TY - THES A1 - Wriedt, Gunter T1 - Modelling of nitrogen transport and turnover during soil and groundwater passage in a small lowland catchment of Northern Germany N2 - Stoffumsatzreaktionen und hydraulische Prozesse im Boden und Grundwasser können in Tieflandeinzugsgebieten zu einer Nitratretention führen. Die Untersuchung dieser Prozesse in Raum und Zeit kann mit Hilfe geeigneter Modelle erfolgen. Ziele dieser Arbeit sind: i) die Entwicklung eines geeigneten Modellansatzes durch Kombination von Teilmodellen zur Simulation des N-Transportes im Boden und Grundwasser von Tieflandeinzugsgebieten und ii) die Untersuchung von Wechselwirkungen zwischen Gebietseigenschaften und N-Transport unter besonderer Berücksichtigung der potentiellen N-Zufuhr in die Oberflächengewässer. Der Modellansatz basiert auf der Kombination verschiedener Teilmodelle: das Bodenwasser- und -stickstoffmodell mRISK-N, das Grundwassermodell MODFLOW und das Stofftransportmodell RT3D. Zur Untersuchung der Wechselwirkungen mit den Gebietseigenschaften muss die Verteilung und Verfügbarkeit von Reaktionspartnern berücksichtigt werden. Dazu wurde ein Reaktionsmodul entwickelt, welches chemische Prozesse im Grundwasser simuliert. Hierzu gehören die Mineralisation organischer Substanz durch Sauerstoff, Nitrat und Sulfat sowie die Pyritoxidation durch Sauerstoff und Nitrat. Der Modellansatz wurde in verschiedenen Einzelstudien angewandt, wobei jeweils bestimmte Teilmodelle im Vordergrund stehen. Alle Modellstudien basieren auf Daten aus dem Schaugrabeneinzugsgebiet (ca. 25 km²), in der Nähe von Osterburg(Altmark) im Norden Sachsen-Anhalts. Die folgenden Einzelstudien wurden durchgeführt: i) Evaluation des Bodenmodells anhand von Lysimeterdaten, ii) Modellierung eines Tracerexperimentes im Feldmaßstab als eine erste Anwendung des Reaktionsmoduls, iii) Untersuchung hydraulisch-chemischer Wechselwirkungen an einem 2D-Grundwassertransekt, iv) Flächenverteilte Modellierung von Grundwasserneubildung und Bodenstickstoffaustrag im Untersuchungsgebiet als Eingangsdaten für nachfolgende Grundwassersimulationen, und v) Untersuchung der Ausbreitung von Nitrat im Grundwasser und des Durchbruchs in die Oberflächengewässer im Untersuchungsgebiet auf Basis einer 3D-Modellierung von Grundwasserströmung und reaktivem Stofftransport. Die Modellstudien zeigen, dass der Modellansatz geeignet ist, die Wechselwirkungen zwischen Stofftransport und –umsatz und den hydraulisch-chemischen Gebietseigenschaften zu modellieren. Die Ausbreitung von Nitrat im Sediment wird wesentlich von der Verfügbarkeit reaktiver Substanzen sowie der Verweilzeit im Grundwasserleiter bestimmt. Bei der Simulation des Untersuchungsgebietes wurde erst nach 70 Jahren eine der gegebenen Eintragssitutation entsprechende Nitratkonzentration im Grundwasserzustrom zum Grabensystem erreicht (konservativer Transport). Die Berücksichtigung von reaktivem Stofftransport führt zu einer deutlichen Reduktion der Nitratkonzentrationen. Die Modellergebnisse zeigen, dass der Grundwasserzustrom die beobachtete Nitratbelastung im Grabensystem nicht erklären kann, da der Großteil des Nitrates durch Denitrifikation verloren geht. Andere Quellen, wie direkte Einträge oder Dränagenzuflüsse müssen ebenfalls in Betracht gezogen werden. Die Prognosefähigkeit des Modells für das Untersuchungsgebiet wird durch die Datenunsicherheiten und die Schätzung der Modellparameter eingeschränkt. Dennoch ist der Modellansatz eine wertvolle Hilfe bei der Identifizierung von belastungsrelevanten Teilflächen (Stoffquellen und -senken) sowie bei der Modellierung der Auswirkungen von Managementmaßnahmen oder Landnutzungsveränderungen auf Grundlage von Szenario-Simulationen. Der Modellansatz unterstützt auch die Interpretation von Beobachtungsdaten, da so die lokalen Informationen in einen räumlichen und zeitlichen Zusammenhang gestellt werden können. N2 - Chemical transformations and hydraulic processes in soil and groundwater often lead to an apparent retention of nitrate in lowland catchments. Models are needed to evaluate the interaction of these processes in space and time. The objectives of this study are i) to develop a specific modelling approach by combining selected modelling tools simulating N-transport and turnover in soils and groundwater of lowland catchments, ii) to study interactions between catchment properties and nitrogen transport. Special attention was paid to potential N-loads to surface waters. The modelling approach combines various submodels for water flow and solute transport in soil and groundwater: The soil-water- and nitrogen-model mRISK-N, the groundwater flow model MODFLOW and the solute transport model RT3D. In order to investigate interactions of N-transport and catchment characteristics, the distribution and availability of reaction partners have to be taken into account. Therefore, a special reaction-module is developed, which simulates various chemical processes in groundwater, such as the degradation of organic matter by oxygen, nitrate, sulphate or pyrite oxidation by oxygen and nitrate. The model approach is applied to different simulation, focussing on specific submodels. All simulation studies are based on field data from the Schaugraben catchment, a pleistocene catchment of approximately 25 km², close to Osterburg(Altmark) in the North of Saxony-Anhalt. The following modelling studies have been carried out: i) evaluation of the soil-water- and nitrogen-model based on lysimeter data, ii) modelling of a field scale tracer experiment on nitrate transport and turnover in the groundwater as a first application of the reaction module, iii) evaluation of interactions between hydraulic and chemical aquifer properties in a two-dimensional groundwater transect, iv) modelling of distributed groundwater recharge and soil nitrogen leaching in the study area, to be used as input data for subsequent groundwater simulations, v) study of groundwater nitrate distribution and nitrate breakthrough to the surface water system in the Schaugraben catchment area and a subcatchment, using three-dimensional modelling of reactive groundwater transport. The various model applications prove the model to be capable of simulating interactions between transport, turnover and hydraulic and chemical catchment properties. The distribution of nitrate in the sediment and the resulting loads to surface waters are strongly affected by the amount of reactive substances and by the residence time within the aquifer. In the Schaugraben catchment simulations, it is found that a period of 70 years is needed to raise the average seepage concentrations of nitrate to a level corresponding to the given input situation, if no reactions are considered. Under reactive transport conditions, nitrate concentrations are reduced effectively. Simulation results show that groundwater exfiltration does not contribute considerably to the nitrate pollution of surface waters, as most nitrate entering soils and groundwater is lost by denitrification. Additional sources, such as direct inputs or tile drains have to be taken into account to explain surface water loads. The prognostic value of the models for the study site is limited by uncertainties of input data and estimation of model parameters. Nevertheless, the modelling approach is a useful aid for the identification of source and sink areas of nitrate pollution as well as the investigation of system response to management measures or landuse changes with scenario simulations. The modelling approach assists in the interpretation of observed data, as it allows to integrate local observations into a spatial and temporal framework. KW - Stickstoff KW - Nitrat KW - Modellierung KW - Grundwasser KW - Einzugsgebiet KW - Reaktiver Stofftransport KW - Denitrifikation KW - Nitrogen KW - Nitrate KW - modelling KW - groundwater KW - catchment KW - reactive transport KW - denitrification Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001307 ER - TY - THES A1 - Brune, Sascha T1 - Modelling continental rift dynamics T1 - Modellierung kontinentaler Riftdynamik N2 - Continental rift systems open up unique possibilities to study the geodynamic system of our planet: geodynamic localization processes are imprinted in the morphology of the rift by governing the time-dependent activity of faults, the topographic evolution of the rift or by controlling whether a rift is symmetric or asymmetric. Since lithospheric necking localizes strain towards the rift centre, deformation structures of previous rift phases are often well preserved and passive margins, the end product of continental rifting, retain key information about the tectonic history from rift inception to continental rupture. Current understanding of continental rift evolution is based on combining observations from active rifts with data collected at rifted margins. Connecting these isolated data sets is often accomplished in a conceptual way and leaves room for subjective interpretation. Geodynamic forward models, however, have the potential to link individual data sets in a quantitative manner, using additional constraints from rock mechanics and rheology, which allows to transcend previous conceptual models of rift evolution. By quantifying geodynamic processes within continental rifts, numerical modelling allows key insight to tectonic processes that operate also in other plate boundary settings, such as mid ocean ridges, collisional mountain chains or subduction zones. In this thesis, I combine numerical, plate-tectonic, analytical, and analogue modelling approaches, whereas numerical thermomechanical modelling constitutes the primary tool. This method advanced rapidly during the last two decades owing to dedicated software development and the availability of massively parallel computer facilities. Nevertheless, only recently the geodynamical modelling community was able to capture 3D lithospheric-scale rift dynamics from onset of extension to final continental rupture. The first chapter of this thesis provides a broad introduction to continental rifting, a summary of the applied rift modelling methods and a short overview of previews studies. The following chapters, which constitute the main part of this thesis feature studies on plate boundary dynamics in two and three dimension followed by global scale analyses (Fig. 1). Chapter II focuses on 2D geodynamic modelling of rifted margin formation. It highlights the formation of wide areas of hyperextended crustal slivers via rift migration as a key process that affected many rifted margins worldwide. This chapter also contains a study of rift velocity evolution, showing that rift strength loss and extension velocity are linked through a dynamic feed-back. This process results in abrupt accelerations of the involved plates during rifting illustrating for the first time that rift dynamics plays a role in changing global-scale plate motions. Since rift velocity affects key processes like faulting, melting and lower crustal flow, this study also implies that the slow-fast velocity evolution should be imprinted in rifted margin structures. Chapter III relies on 3D Cartesian rift models in order to investigate various aspects of rift obliquity. Oblique rifting occurs if the extension direction is not orthogonal to the rift trend. Using 3D lithospheric-scale models from rift initialisation to breakup I could isolate a characteristic evolution of dominant fault orientations. Further work in Chapter III addresses the impact of rift obliquity on the strength of the rift system. We illustrate that oblique rifting is mechanically preferred over orthogonal rifting, because the brittle yielding requires a lower tectonic force. This mechanism elucidates rift competition during South Atlantic rifting, where the more oblique Equatorial Atlantic Rift proceeded to breakup while the simultaneously active but less oblique West African rift system became a failed rift. Finally this Chapter also investigates the impact of a previous rift phase on current tectonic activity in the linkage area of the Kenyan with Ethiopian rift. We show that the along strike changes in rift style are not caused by changes in crustal rheology. Instead the rift linkage pattern in this area can be explained when accounting for the thinned crust and lithosphere of a Mesozoic rift event. Chapter IV investigates rifting from the global perspective. A first study extends the oblique rift topic of the previous chapter to global scale by investigating the frequency of oblique rifting during the last 230 million years. We find that approximately 70% of all ocean-forming rift segments involved an oblique component of extension where obliquities exceed 20°. This highlights the relevance of 3D approaches in modelling, surveying, and interpretation of many rifted margins. In a final study, we propose a link between continental rift activity, diffuse CO2 degassing and Mesozoic/Cenozoic climate changes. We used recent CO2 flux measurements in continental rifts to estimate worldwide rift-related CO2 release, which we based on the global extent of rifts through time. The first-order correlation to paleo-atmospheric CO2 proxy data suggests that rifts constitute a major element of the global carbon cycle. N2 - Kontinentale Grabensysteme eröffnen einzigartige Einsichten in das geodynamische System unseres Planeten: Geodynamische Lokalisierungs-prozesse prägen die Morphologie von Riftsystemen, indem sie die zeitabhängige Aktivität von Störungen, die topographische Entwicklung des Rifts oder dessen Symmetrieentwicklung kontrollieren. Da die Verformung oft in Richtung des Riftzentrums lokalisiert, sind die Deformationsstrukturen früherer Riftphasen meist gut erhalten und passive Ränder, die Endprodukte kontinentalen Riftings, beinhalten wichtige Informationen über die tektonische Geschichte vom Riftbeginn bis zum kontinentalen Zerbrechen. Unser gegenwärtiges Verständnis der Riftentwicklung basiert auf der Kombination von Beobachtungen in aktiven Rifts mit Informationen, die an passiven Kontinental-rändern gesammelt wurden. Die Einbindung dieser isolierten Datensätze erfolgt oft konzeptionell und lässt Raum für subjektive Interpretationen. Geodynamische Vorwärtsmodelle haben jedoch das Potenzial, einzelne Datensätze quantitativ zu verknüpfen, wobei zusätzliche Informationen aus der Gesteinsmechanik und Rheologie verwendet werden, die es ermöglichen, frühere konzeptionelle Riftmodelle weiter zu entwickeln. In dieser Arbeit kombiniere ich numerische, plattentektonische, analytische und analoge Modellierungsansätze, wobei die numerische thermomechanische Modellierung das primäre Werkzeug darstellt. Diese Methode hat sich in den letzten zwei Jahrzehnten aufgrund dedizierter Softwareentwicklung und der Verfügbarkeit von massiv parallelisierten Supercomputern sehr schnell entwickelt. Dennoch gelang es der geodynamischen Modellierungsgemeinschaft erst vor kurzem, die dreidimensionale lithosphärenskalige Riftentwicklung vom Beginn der Dehnung bis zum endgültigen Zerbrechen eines Kontinents zu erfassen. Meine Habilitationsschrift beinhaltet eine Einführung in kontinentale Rifttektonik, eine Zusammenfassung der angewendeten Modellierungsmethoden und einen kurzen Überblick über Vorstudien. In dem Hauptteil dieser Arbeit werden Untersuchungen auf Plattenrandskala in zwei und drei Dimensionen durchgeführt, gefolgt von globalen Analysen der Riftentwicklung. Dabei beschreibe ich die Bildung extrem ausgedehnter kontinentaler Kruste, die an vielen gerifteten Kontinentalrändern beobachtet wurde, die Rückkopplung zwischen Riftdynamik und Plattenbewegungen, der Wirkung von Riftschrägheit und tektonischer Vererbung auf die Riftarchitektur sowie den Einfluss von Riftsystemen auf CO2-Entgasung in Bezug auf die paläoklimatische Entwicklung der Erde seit dem Zerbrechen Pangäas. KW - rifting KW - modelling KW - plate tectonics KW - geodynamics KW - Grabenbruch KW - Modellierung KW - Plattentektonik KW - Geodynamik Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432364 ER - TY - THES A1 - Francke, Till T1 - Measurement and modelling of water and sediment fluxes in meso-scale dryland catchments T1 - Messung und Modellierung von Wasser- und Sedimentflüssen in mesoskaligen Trockeneinzugsgebieten N2 - Water shortage is a serious threat for many societies worldwide. In drylands, water management measures like the construction of reservoirs are affected by eroded sediments transported in the rivers. Thus, the capability of assessing water and sediment fluxes at the river basin scale is of vital importance to support management decisions and policy making. This subject was addressed by the DFG-funded SESAM-project (Sediment Export from large Semi-Arid catchments: Measurements and Modelling). As a part of this project, this thesis focuses on (1) the development and implementation of an erosion module for a meso-scale catchment model, (2) the development of upscaling and generalization methods for the parameterization of such model, (3) the execution of measurements to obtain data required for the modelling and (4) the application of the model to different study areas and its evaluation. The research was carried out in two meso-scale dryland catchments in NE-Spain: Ribera Salada (200 km²) and Isábena (450 km²). Adressing objective 1, WASA-SED, a spatially semi-distributed model for water and sediment transport at the meso-scale was developed. The model simulates runoff and erosion processes at the hillslope scale, transport processes of suspended and bedload fluxes in the river reaches, and retention and remobilisation processes of sediments in reservoirs. This thesis introduces the model concept, presents current model applications and discusses its capabilities and limitations. Modelling at larger scales faces the dilemma of describing relevant processes while maintaining a manageable demand for input data and computation time. WASA-SED addresses this challenge by employing an innovative catena-based upscaling approach: the landscape is represented by characteristic toposequences. For deriving these toposequences with regard to multiple attributes (eg. topography, soils, vegetation) the LUMP-algorithm (Landscape Unit Mapping Program) was developed and related to objective 2. It incorporates an algorithm to retrieve representative catenas and their attributes, based on a Digital Elevation Model and supplemental spatial data. These catenas are classified to provide the discretization for the WASA-SED model. For objective 3, water and sediment fluxes were monitored at the catchment outlet of the Isábena and some of its sub-catchments. For sediment yield estimation, the intermittent measurements of suspended sediment concentration (SSC) had to be interpolated. This thesis presents a comparison of traditional sediment rating curves (SRCs), generalized linear models (GLMs) and non-parametric regression using Random Forests (RF) and Quantile Regression Forests (QRF). The observed SSCs are highly variable and range over six orders of magnitude. For these data, traditional SRCs performed poorly, as did GLMs, despite including other relevant process variables (e.g. rainfall intensities, discharge characteristics). RF and QRF proved to be very robust and performed favourably for reproducing sediment dynamics. QRF additionally excels in providing estimates on the accuracy of the predictions. Subsequent analysis showed that most of the sediment was exported during intense storms of late summer. Later floods yielded successively less sediment. Comparing sediment generation to yield at the outlet suggested considerable storage effects within the river channel. Addressing objective 4, the WASA-SED model was parameterized for the two study areas in NE Spain and applied with different foci. For Ribera Salada, the uncalibrated model yielded reasonable results for runoff and sediment. It provided quantitative measures of the change in runoff and sediment yield for different land-uses. Additional land management scenarios were presented and compared to impacts caused by climate change projections. In contrast, the application for the Isábena focussed on exploring the full potential of the model's predictive capabilities. The calibrated model achieved an acceptable performance for the validation period in terms of water and sediment fluxes. The inadequate representation of the lower sub-catchments inflicted considerable reductions on model performance, while results for the headwater catchments showed good agreement despite stark contrasts in sediment yield. In summary, the application of WASA-SED to three catchments proved the model framework to be a practicable multi-scale approach. It successfully links the hillslope to the catchment scale and integrates the three components hillslope, river and reservoir in one model. Thus, it provides a feasible approach for tackling issues of water and sediment yield at the meso-scale. The crucial role of processes like transmission losses and sediment storage in the river has been identified. Further advances can be expected when the representation of connectivity of water and sediment fluxes (intra-hillslope, hillslope-river, intra-river) is refined and input data improves. N2 - In vielen Regionen der Erde stellt Wassermangel ein Problem für die menschliche Gesellschaft dar. Insbesondere in Trockengebieten werden jedoch Maßnahmen des Wassermanagements, wie die Wasserspeicherung in Stauseen, durch die im Fluss transportierten Sedimentfrachten negativ beeinflusst. Somit stellen eine adäquate Beurteilung von Wasser- und Sedimentflüssen eine wichtige Voraussetzung für Entscheidungen in Wassermanagement und -planung dar. Dieser Problematik widmete sich das SESAM-Projekt (Sediment Export from large Semi-Arid catchments: Measurements and Modelling). Im Rahmen dieses Projektes befasste sich diese Dissertation mit (1) der Entwicklung und Umsetzung eines Erosions-Moduls für ein Einzugsgebietsmodell auf der Meso-Skala, (2) der Entwicklung von Skalierungs- und Generalisierungsmethoden für die Parametrisierung eines solchen Modells, (3) der Durchführung von Messungen, um die notwendigen Daten für das Modell zu gewinnen und (4) die Anwendung des Modells für verschiedene Einzugsgebiete und seiner Bewertung. Die Studie umfasste zwei mesoskalige Trockeneinzugsgebiete in NO-Spanien: Ribera Salada (200 km²) und Isábena (450 km²). Im Hinblick auf Zielstellung 1 wurde WASA-SED, ein räumlich semi-distribuiertes Modell für Wasserflüsse und Sedimenttransport, entwickelt. Das Modell simuliert Abfluss- und Erosionsprozesse auf der Hangskala, den Transport von suspendierten und Geschiebesedimenten auf der Skala von Flussabschnitten sowie Rückhalt- und Remobilisierungsprozesse von Sedimenten in Stauseen. Die vorliegende Arbeit stellt das Modellkonzept und Modellanwendungen vor und beschreibt Fähigkeiten und Grenzen des Modells. Die Modellierung auf größeren Skalen beinhaltet das Dilemma, dass relevante Prozesse beschrieben werden müssen, gleichzeitig aber die Anforderungen an Eingabedaten und Rechenzeit realisierbar bleiben. In WASA-SED wird diesem durch die Anwendung eines innovativen Hangprofil-basierten Skalierungsansatzes Rechnung getragen, indem die Landschaft durch charakteristische Toposequenzen repräsentiert wird. Um derartige Toposequenzen hinsichtlich verschiedener Landschaftseigenschaften (z.B. Relief, Böden, Vegetation) abzuleiten, wurde in Bezug zur Zielstellung 2 der LUMP-Algorithmus (Landscape Unit Mapping Program) entwickelt. LUMP beinhaltet ein Verfahren zur Berechnung repräsentativer Hangprofile und ihrer Attribute aus einem digitalen Geländemodell und optionalen Zusatzdaten. Durch die Klassifikation dieser Hangprofile wird die Grundlage der räumlichen Diskretisierung des WASA-SED Modells bereitgestellt. Im Zusammenhang mit Zielstellung 3 wurden Abfluss und Sedimentkonzentration (SSC) am Auslass und in einigen Teileinzugsgebieten des Isábena-Einzugsgebietes gemessen. Um den Sedimentaustrag zu bestimmen, mussten die Einzelmessung der Sedimentkonzentration interpoliert werden. Diese Arbeit vergleicht die Eignung traditioneller Eichkurvenansätze (SRCs), Generalized Linear Models (GLMs) und der nichtparametrischen Regressionstechniken Random Forests (RF) und Quantile Regression Forests (QRF). Da die beobachteten SSC-Werte stark über sechs Größenordnungen variieren, erwiesen sich die traditionellen SRCs als unzureichend. Gleichfalls versagten GLMs trotz der Einbeziehung weiterer relevanter Prozessgrößen wie Niederschlagsintensitäten und Abflusscharakteristika. RF und QRF stellten sich hingegen als sehr robust und für die Rekonstruktion der Sedimentdynamik geeignet dar. QRF liefert darüber hinaus auch Informationen zur Genauigkeit dieser Schätzungen. Die darauf aufbauende Analyse ergab, dass der Großteil der Sedimentfracht während der Starkregenereignisse des Spätsommers transportiert wurde. Spätere Niederschlagsereignisse erzeugten deutlich geringeren Austrag. Durch den Vergleich von Sedimentfrachten im Oberlauf mit Austragsmengen am Gebietsauslass konnte die Bedeutung der Sedimentspeicherung im Flussbett identifiziert werden. Zielstellung 4 wurde bearbeitet, indem das WASA-SED-Modell für zwei Untersuchungsgebiete in NO-Spanien unter unterschiedlichen Gesichtspunkten angewendet wurde. Für das Ribera-Salada-Einzugsgebiet lieferte das unkalibrierte Modell plausible Ergebnisse hinsichtlich der Wasser- und Sedimentflüsse. Damit war es möglich, die potentiellen Änderungen dieser Größen durch verschiedene Landnutzungsszenarien zu quantifizieren. Diese wurden den prognostizierten Veränderungen, die durch Klimaänderungen hervorgerufen würden, gegenübergestellt. Im Gegensatz dazu konzentrierte sich die Anwendung im Isábena-Einzugsgebiet auf die Untersuchung der bestmöglichen Modellanpassung. Im Validierungszeitraum ergab sich eine befriedigende Modellgüte für Wasser- und Sedimentflüsse. Diese Gesamtgüte wurde maßgeblich durch die unzureichende Abbildung der Unterliegergebiete beeinflusst, wohingegen die Gebiete des Oberlaufs, trotz ihrer stark kontrastierenden Sedimentausträge, gut dargestellt wurden. Die Anwendung des WASA-SED-Modells auf drei verschiedene Untersuchungsgebiete bestätigt die generelle Eignung des Modellkonzepts als einen sinnvollen multiskaligen Ansatz, der in einem Modell effektiv die Hangskala mit der Einzugsgebietsskala sowie den Einfluss von Flüssen und Stauseen vereint. Er stellt somit eine mögliche Grundlage für die Bearbeitung von wasser- und sedimentbezogenen Fragestellungen auf der Meso-Skala dar. Die besondere Bedeutung der Prozesse der Sickerverluste und Sedimentspeicherung im Gerinne konnten herausgearbeitet werden. Mögliche Verbesserungen betreffen die Berücksichtigung der Konnektivität von Wasser- und Sedimentflüssen (auf dem Hang, zwischen Hang und Fluss, innerhalb des Flusses) und die Qualität der Eingangsdaten für das Modell. KW - Erosion KW - Sediment KW - Modellierung KW - Spanien KW - Brasilien KW - erosion KW - sediment KW - modelling KW - Spain KW - Brazil Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-31525 ER - TY - GEN A1 - Rodriguez Piceda, Constanza A1 - Scheck Wenderoth, Magdalena A1 - Gomez Dacal, Maria Laura A1 - Bott, Judith A1 - Prezzi, Claudia Beatriz A1 - Strecker, Manfred T1 - Lithospheric density structure of the southern Central Andes constrained by 3D data-integrative gravity modelling T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The southern Central Andes (SCA) (between 27 degrees S and 40 degrees S) is bordered to the west by the convergent margin between the continental South American Plate and the oceanic Nazca Plate. The subduction angle along this margin is variable, as is the deformation of the upper plate. Between 33 degrees S and 35 degrees S, the subduction angle of the Nazca plate increases from sub-horizontal (< 5 degrees) in the north to relatively steep (similar to 30 degrees) in the south. The SCA contain inherited lithological and structural heterogeneities within the crust that have been reactivated and overprinted since the onset of subduction and associated Cenozoic deformation within the Andean orogen. The distribution of the deformation within the SCA has often been attributed to the variations in the subduction angle and the reactivation of these inherited heterogeneities. However, the possible influence that the thickness and composition of the continental crust have had on both short-term and long-term deformation of the SCA is yet to be thoroughly investigated. For our investigations, we have derived density distributions and thicknesses for various layers that make up the lithosphere and evaluated their relationships with tectonic events that occurred over the history of the Andean orogeny and, in particular, investigated the short- and long-term nature of the present-day deformation processes. We established a 3D model of lithosphere beneath the orogen and its foreland (29 degrees S-39 degrees S) that is consistent with currently available geological and geophysical data, including the gravity data. The modelled crustal configuration and density distribution reveal spatial relationships with different tectonic domains: the crystalline crust in the orogen (the magmatic arc and the main orogenic wedge) is thicker (similar to 55 km) and less dense (similar to 2900 kg/m(3)) than in the forearc (similar to 35 km, similar to 2975 kg/m(3)) and foreland (similar to 30 km, similar to 3000 kg/m(3)). Crustal thickening in the orogen probably occurred as a result of stacking of low-density domains, while density and thickness variations beneath the forearc and foreland most likely reflect differences in the tectonic evolution of each area following crustal accretion. No clear spatial relationship exists between the density distribution within the lithosphere and previously proposed boundaries of crustal terranes accreted during the early Paleozoic. Areas with ongoing deformation show a spatial correlation with those areas that have the highest topographic gradients and where there are abrupt changes in the average crustal-density contrast. This suggests that the short-term deformation within the interior of the Andean orogen and its foreland is fundamentally influenced by the crustal composition and the relative thickness of different crustal layers. A thicker, denser, and potentially stronger lithosphere beneath the northern part of the SCA foreland is interpreted to have favoured a strong coupling between the Nazca and South American plates, facilitating the development of a sub-horizontal slab. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1369 KW - Central andes KW - Lithospheric structure KW - Crustal density KW - Gravity KW - modelling KW - Subduction Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-562628 SN - 1866-8372 IS - 7 ER - TY - JOUR A1 - Rodriguez Piceda, Constanza A1 - Scheck Wenderoth, Magdalena A1 - Gomez Dacal, Maria Laura A1 - Bott, Judith A1 - Prezzi, Claudia Beatriz A1 - Strecker, Manfred T1 - Lithospheric density structure of the southern Central Andes constrained by 3D data-integrative gravity modelling JF - International journal of earth sciences N2 - The southern Central Andes (SCA) (between 27 degrees S and 40 degrees S) is bordered to the west by the convergent margin between the continental South American Plate and the oceanic Nazca Plate. The subduction angle along this margin is variable, as is the deformation of the upper plate. Between 33 degrees S and 35 degrees S, the subduction angle of the Nazca plate increases from sub-horizontal (< 5 degrees) in the north to relatively steep (similar to 30 degrees) in the south. The SCA contain inherited lithological and structural heterogeneities within the crust that have been reactivated and overprinted since the onset of subduction and associated Cenozoic deformation within the Andean orogen. The distribution of the deformation within the SCA has often been attributed to the variations in the subduction angle and the reactivation of these inherited heterogeneities. However, the possible influence that the thickness and composition of the continental crust have had on both short-term and long-term deformation of the SCA is yet to be thoroughly investigated. For our investigations, we have derived density distributions and thicknesses for various layers that make up the lithosphere and evaluated their relationships with tectonic events that occurred over the history of the Andean orogeny and, in particular, investigated the short- and long-term nature of the present-day deformation processes. We established a 3D model of lithosphere beneath the orogen and its foreland (29 degrees S-39 degrees S) that is consistent with currently available geological and geophysical data, including the gravity data. The modelled crustal configuration and density distribution reveal spatial relationships with different tectonic domains: the crystalline crust in the orogen (the magmatic arc and the main orogenic wedge) is thicker (similar to 55 km) and less dense (similar to 2900 kg/m(3)) than in the forearc (similar to 35 km, similar to 2975 kg/m(3)) and foreland (similar to 30 km, similar to 3000 kg/m(3)). Crustal thickening in the orogen probably occurred as a result of stacking of low-density domains, while density and thickness variations beneath the forearc and foreland most likely reflect differences in the tectonic evolution of each area following crustal accretion. No clear spatial relationship exists between the density distribution within the lithosphere and previously proposed boundaries of crustal terranes accreted during the early Paleozoic. Areas with ongoing deformation show a spatial correlation with those areas that have the highest topographic gradients and where there are abrupt changes in the average crustal-density contrast. This suggests that the short-term deformation within the interior of the Andean orogen and its foreland is fundamentally influenced by the crustal composition and the relative thickness of different crustal layers. A thicker, denser, and potentially stronger lithosphere beneath the northern part of the SCA foreland is interpreted to have favoured a strong coupling between the Nazca and South American plates, facilitating the development of a sub-horizontal slab. KW - Central andes KW - Lithospheric structure KW - Crustal density KW - Gravity KW - modelling KW - Subduction Y1 - 2020 U6 - https://doi.org/10.1007/s00531-020-01962-1 SN - 1437-3254 SN - 1437-3262 VL - 110 IS - 7 SP - 2333 EP - 2359 PB - Springer CY - New York ER - TY - THES A1 - Wagner, Anja T1 - Konzeption und Aufbau eines Geoinformationssystems zur Modellierung und Simulation von Offenlandschaften N2 - Zwischen 1990 und 1994 wurden rund 1000 Liegenschaften, die in der ehemaligen DDR von der Sowjetarmee und der NVA für militärische Übungen genutzt wurden, an Bund und Länder übergeben. Die größten Truppenübungsplätze liegen in Brandenburg und sind heute teilweise in Großschutzgebiete integriert, andere Plätze werden von der Bundeswehr weiterhin aktiv genutzt. Aufgrund des militärischen Betriebs sind die Böden dieser Truppenübungsplätze oft durch Blindgänger, Munitionsreste, Treibstoff- und Schmierölreste bis hin zu chemischen Kampfstoffen belastet. Allerdings existieren auf fast allen Liegenschaften neben diesen durch Munition und militärische Übungen belasteten Bereichen auch naturschutzfachlich wertvolle Flächen; gerade in den Offenlandbereichen kann dies durchaus mit einer Belastung durch Kampfmittel einhergehen. Charakteristisch für diese offenen Flächen, zu denen u.a. Zwergstrauchheiden, Trockenrasen, wüstenähnliche Sandflächen und andere nährstoffarme baumlose Lebensräume gehören, sind Großflächigkeit, Abgeschiedenheit sowie ihre besondere Nutzung und Bewirtschaftung, d.h. die Abwesenheit von land- und forstwirtschaftlichem Betrieb sowie von Siedlungsflächen. Diese Charakteristik war die Grundlage für die Entwicklung einer speziell angepassten Flora und Fauna. Nach Beendigung des Militärbetriebs setzte dann in weiten Teilen eine großflächige Sukzession – die allmähliche Veränderung der Zusammensetzung von Pflanzen- und Tiergesellschaften – ein, die diese offenen Bereiche teilweise bereits in Wald verwandelte und somit verschwinden ließ. Dies wiederum führte zum Verlust der an diese Offenlandflächen gebundenen Tier- und Pflanzenarten. Zur Erhaltung, Gestaltung und Entwicklung dieser offenen Flächen wurden daher von einer interdisziplinären Gruppe von Naturwissenschaftlern verschiedene Methoden und Konzepte auf ihre jeweilige Wirksamkeit untersucht. So konnten schließlich die für die jeweiligen Standortbedingungen geeigneten Maßnahmen eingeleitet werden. Voraussetzung für die Einleitung der Maßnahmen sind zum einen Kenntnisse zu diesen jeweiligen Standortbedingungen, d.h. zum Ist-Zustand, sowie zur Entwicklung der Flächen, d.h. zur Dynamik. So kann eine Abschätzung über die zukünftige Flächenentwicklung getroffen werden, damit ein effizienter Maßnahmeneinsatz stattfinden kann. Geoinformationssysteme (GIS) spielen dabei eine entscheidende Rolle zur digitalen Dokumentation der Biotop- und Nutzungstypen, da sie die Möglichkeit bieten, raum- und zeitbezogene Geometrie- und Sachdaten in großen Mengen zu verarbeiten. Daher wurde ein fachspezifisches GIS für Truppenübungsplätze entwickelt und implementiert. Die Aufgaben umfassten die Konzeption der Datenbank und des Objektmodells sowie fachspezifischer Modellierungs-, Analyse- und Präsentationsfunktionen. Für die Integration von Fachdaten in die GIS-Datenbank wurde zudem ein Metadatenkatalog entwickelt, der in Form eines zusätzlichen GIS-Tools verfügbar ist. Die Basisdaten für das GIS wurden aus Fernerkundungsdaten, topographischen Karten sowie Geländekartierungen gewonnen. Als Instrument für die Abschätzung der zukünftigen Entwicklung wurde das Simulationstool AST4D entwickelt, in dem sowohl die Nutzung der (Raster-)Daten des GIS als Ausgangsdaten für die Simulationen als auch die Nutzung der Simulationsergebnisse im GIS möglich ist. Zudem können die Daten in AST4D raumbezogen visualisiert werden. Das mathematische Konstrukt für das Tool war ein so genannter Zellulärer Automat, mit dem die Flächenentwicklung unter verschiedenen Voraussetzungen simuliert werden kann. So war die Bildung verschiedener Szenarien möglich, d.h. die Simulation der Flächenentwicklung mit verschiedenen (bekannten) Eingangsparametern und den daraus resultierenden unterschiedlichen (unbekannten) Endzuständen. Vor der Durchführung einer der drei in AST4D möglichen Simulationsstufen können angepasst an das jeweilige Untersuchungsgebiet benutzerspezifische Festlegungen getroffen werden. N2 - Between 1990 and 1994 more than a thousand military properties in East Germany used for military exercise by the Soviet army and the East German forces were handed over to government institutions of the national state and federal states (Laender), respectively. The largest military training areas are located in the federal state of Brandenburg. Some of these are, by now, part of environmentally protected areas, others are still being used by the German forces. As a result of long-lasting military operations the soils of these areas are heavily polluted by ammunition, duds, fuel and lubricants as well as a range of chemicals. Due to these special environmental conditions specifically adapted vegetation and fauna developed in these environments which make these areas valuable from an environmental protection perspective. Unlike other environments in North West Germany these former military training areas are characterised by wideness, separateness as well as the absence of agricultural, forest and settlement land use. This allowed for the development of a characteristic vegetation cover composed of dwarf bush heaths, drying lawns, desert-like sand surfaces and other nutrient-poor treeless habitats. Following the end of military use the process of succession – a gradual change of flora and fauna over space and time – set in. More a than a decade later the former open plains have, in part, developed into forests. The loss of open range land effected the disappearance of adapted animal and plant populations. To retain, preserve and develop these environmentally valuable areas different methods and concepts were examined for the respective effectiveness by multi-disciplinary group of scientists. Prerequisites of the application of methods to preserve the open plains are up-to-date knowledge of local conditions as well as in-depth understanding of the land surface developments and their dynamics, in particular. Based on this expertise the future surface development of these areas can be estimated which, in term, is a prerequisite for selecting the appropriate methods. Geo information systems (GIS) play an important role for the digital documentation and monitoring of biotopes, land use etc as they provide for acquisition, processing and storage of mass geo data including their locational and feature attributes. To make this GIS functionality available for the management and development of former military training areas a dedicated GIS has been developed and implemented. Tasks tackled included a database concept and object model as well as application-specific modelling, analysis and map presentation functions. Integration of relevant spatial and attribute data into this system required a meta data catalogue made available as an add-on GIS tool. Topographic base data for GIS input were taken from remote sensing imagery, topographic maps and additional field surveys. To simulate the development of the former military areas over space and time a specific simulation tool had to be developed as conventional GIS lack dynamic functionalities. The AST4D tool enables the user to utilise existing GIS data. Processed results, in term, can then be used within the GIS application. Additionally AST4D data may be visualised in map form. The AST4D GIS tool is based on the mathematical model of cellular automata. This model allows for the user-defined setting of status quo and simulation of future developments under different input parameters and target conditions. KW - Truppenübungsplatz KW - Offenland KW - Modellierung KW - Analyse KW - Landscape Metrics KW - Simulation KW - Szenarienbildung KW - Zellulärer Automat KW - military plains KW - open range KW - modelling KW - analysis KW - landscape metrics KW - simulation KW - scenarios KW - cellular automata Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001411 ER - TY - JOUR A1 - Aichner, Bernhard A1 - Makhmudov, Zafar A1 - Rajabov, Iljomjon A1 - Zhang, Qiong A1 - Pausata, Francesco Salvatore R. A1 - Werner, Martin A1 - Heinecke, Liv A1 - Kuessner, Marie L. A1 - Feakins, Sarah J. A1 - Sachse, Dirk A1 - Mischke, Steffen T1 - Hydroclimate in the Pamirs Was Driven by Changes in Precipitation-Evaporation Seasonality Since theLast Glacial Period JF - Geophysical research letters N2 - The Central Asian Pamir Mountains (Pamirs) are a high-altitude region sensitive to climatic change, with only few paleoclimatic records available. To examine the glacial-interglacial hydrological changes in the region, we analyzed the geochemical parameters of a 31-kyr record from Lake Karakul and performed a set of experiments with climate models to interpret the results. delta D values of terrestrial biomarkers showed insolation-driven trends reflecting major shifts of water vapor sources. For aquatic biomarkers, positive delta D shifts driven by changes in precipitation seasonality were observed at ca. 31-30, 28-26, and 17-14 kyr BP. Multiproxy paleoecological data and modelling results suggest that increased water availability, induced by decreased summer evaporation, triggered higher lake levels during those episodes, possibly synchronous to northern hemispheric rapid climate events. We conclude that seasonal changes in precipitation-evaporation balance significantly influenced the hydrological state of a large waterbody such as Lake Karakul, while annual precipitation amount and inflows remained fairly constant. KW - climate KW - biomarker KW - geochemistry KW - modelling KW - paleoclimate KW - hydrology Y1 - 2019 U6 - https://doi.org/10.1029/2019GL085202 SN - 0094-8276 SN - 1944-8007 VL - 46 IS - 23 SP - 13972 EP - 13983 PB - American Geophysical Union CY - Washington ER - TY - THES A1 - Kath, Nadja Jeanette T1 - Functional traits determine biomass dynamics, coexistence and energetics in plankton food webs N2 - Plankton food webs are the basis of marine and limnetic ecosystems. Especially aquatic ecosystems of high biodiversity provide important ecosystem services for humankind as providers of food, coastal protection, climate regulation, and tourism. Understanding the dynamics of biomass and coexistence in these food webs is a first step to understanding the ecosystems. It also lays the foundation for the development of management strategies for the maintenance of the marine and freshwater biodiversity despite anthropogenic influences. Natural food webs are highly complex, and thus often equally complex methods are needed to analyse and understand them well. Models can help to do so as they depict simplified parts of reality. In the attempt to get a broader understanding of the complex food webs, diverse methods are used to investigate different questions. In my first project, we compared the energetics of a food chain in two versions of an allometric trophic network model. In particular, we solved the problem of unrealistically high trophic transfer efficiencies (up to 70%) by accounting for both basal respiration and activity respiration, which decreased the trophic transfer efficiency to realistic values of ≤30%. Next in my second project I turned to plankton food webs and especially phytoplankton traits. Investigating a long-term data set from Lake Constance we found evidence for a trade-off between defence and growth rate in this natural phytoplankton community. I continued working with this data set in my third project focusing on ciliates, the main grazer of phytoplankton in spring. Boosted regression trees revealed that temperature and predators have the highest influence on net growth rates of ciliates. We finally investigated in my fourth project a food web model inspired by ciliates to explore the coexistence of plastic competitors and to study the new concept of maladaptive switching, which revealed some drawbacks of plasticity: faster adaptation led to higher maladaptive switching towards undefended phenotypes which reduced autotroph biomass and coexistence and increased consumer biomass. It became obvious that even well-established models should be critically questioned as it is important not to forget reality on the way to a simplistic model. The results showed furthermore that long-term data sets are necessary as they can help to disentangle complex natural processes. Last, one should keep in mind that the interplay between models and experiments/ field data can deliver fruitful insights about our complex world. N2 - Plankton-Nahrungsnetze sind die Grundlage mariner und limnischer Ökosysteme. Besonders die aquatischen Ökosysteme mit hoher Biodiversität erbringen wichtige Ökosystemdienstleistungen für uns Menschen wie beispielsweise die Bereitstellung von Nahrung, Küstenschutz, Klimaregulation sowie Tourismus. Die Dynamiken und die Koexistenz der Arten in diesen Ökosystemen zu verstehen, ist ein erster Schritt für die Entwicklung von Möglichkeiten zum Schutz ihrer Biodiversität. Aufgrund der hohen Komplexität natürlicher Nahrungsnetze braucht es oft ebenso komplexe Methoden um sie zu analysieren und zu verstehen. Modelle können dabei unterstützen, da sie Teile der Realität vereinfacht abbilden. In meiner Dissertation arbeitete ich mit verschiedenen Nahrungsnetzmodellen, um die Dynamiken in Nahrungsnetzen zu verstehen. In meinem ersten Projekt haben wir die Energieflüsse einer Nahrungskette in zwei Versionen eines allometrisch skalierten Nahrungsnetzmodells untersucht. Wenn nur die klassische basale Respiration einbezogen wird, steigt die trophische Transfereffizienz auf bis zu unrealistische 70 %. Durch die Einbeziehung der aktivitätsbezogenen Respiration sank die trophische Transfereffizienz auf realistische Werte von maximal 30 %. Danach wandte ich mich in meinem zweiten Projekt Plankton-Nahrungsnetzen und den Eigenschaften des Phytoplanktons zu. Bei der Untersuchung eines Langzeitdatensatzes von 21 Jahren aus dem Bodensee fanden wir einen Beweis für einen Trade-off zwischen Verteidigung und Wachstumsrate in einer natürlichen Phytoplankton-gemeinschaft. In diesem Datensatz konzentrierte ich mich anschließend in meinem dritten Projket auf Ciliaten, welche die wichtigsten Fraßfeinde von Phytoplankton im Frühjahr darstellen. Die Methode der boosted regression trees zeigte, dass Temperatur und Räuber den größten Einfluss auf die Nettowachstumsraten der Ciliaten haben. Schließlich nutzten wir in meinem vierten Projekt ein von Ciliaten inspiriertes Nahrungsnetzmodell, um die Koexistenz von Konkurrenten mit veränderlichen Eigenschaften und das neue Konzept des maladaptive switching zu untersuchen, welches Nachteile der Plastizität zeigt: höhere Wechselraten zwischen den Phänotypen führten zu höherem maladaptive switching in Richtung der unverteidigten Phänotypen, was die Biomasse und Koexistenz der Autotrophen reduziert und die Biomasse des Konsumenten erhöht. Es wurde offensichtlich, dass auch etablierte Modelle kritisch hinterfragt werden müssen, da es wichtig ist, die Realität auf dem Weg zu einem einfachen Modell nicht zu vergessen. Meine Ergebnisse zeigten des Weiteren, wie wichtig Langzeitdatensätze sind, da sie helfen können, komplexe natürliche Prozesse zu beleuchten. Dieses Wechselspiel zwischen Modellen und Daten aus Experimenten oder Felduntersuchungen kann fruchtbare Ergebnisse liefern und zu einem größeren Verständnis unserer komplexen Welt beitragen. KW - functional traits KW - plankton food web KW - coexistence KW - modelling KW - Modellierung KW - Planktonnahrungsnetz KW - Koexistenz Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-551239 ER - TY - GEN A1 - Eldridge, Tilly A1 - Łangowski, Łukasz A1 - Stacey, Nicola A1 - Jantzen, Friederike A1 - Moubayidin, Laila A1 - Sicard, Adrien A1 - Southam, Paul A1 - Kennaway, Richard A1 - Lenhard, Michael A1 - Coen, Enrico S. A1 - Østergaard, Lars T1 - Fruit shape diversity in the Brassicaceae is generated by varying patterns of anisotropy T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Fruits exhibit a vast array of different 3D shapes, from simple spheres and cylinders to more complex curved forms; however, the mechanism by which growth is oriented and coordinated to generate this diversity of forms is unclear. Here, we compare the growth patterns and orientations for two very different fruit shapes in the Brassicaceae: the heart-shaped Capsella rubella silicle and the near-cylindrical Arabidopsis thaliana silique. We show, through a combination of clonal and morphological analyses, that the different shapes involve different patterns of anisotropic growth during three phases. These experimental data can be accounted for by a tissue level model in which specified growth rates vary in space and time and are oriented by a proximodistal polarity field. The resulting tissue conflicts lead to deformation of the tissue as it grows. The model allows us to identify tissue-specific and temporally specific activities required to obtain the individual shapes. One such activity may be provided by the valve-identity gene FRUITFULL, which we show through comparative mutant analysis to modulate fruit shape during post-fertilisation growth of both species. Simple modulations of the model presented here can also broadly account for the variety of shapes in other Brassicaceae species, thus providing a simplified framework for fruit development and shape diversity. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 986 KW - Brassicaceae KW - Capsella KW - arabidopsis KW - fruit shape KW - modelling KW - anisotropic growth Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-438041 SN - 1866-8372 IS - 986 SP - 3394 EP - 3406 ER - TY - JOUR A1 - Klose, Tim A1 - Chaparro, M. Carme A1 - Schilling, Frank A1 - Butscher, Christoph A1 - Klumbach, Steffen A1 - Blum, Philipp T1 - Fluid flow simulations of a large-scale borehole leakage experiment JF - Transport in Porous Media N2 - Borehole leakage is a common and complex issue. Understanding the fluid flow characteristics of a cemented area inside a borehole is crucial to monitor and quantify the wellbore integrity as well as to find solutions to minimise existing leakages. In order to improve our understanding of the flow behaviour of cemented boreholes, we investigated experimental data of a large-scale borehole leakage tests by means of numerical modelling using three different conceptual models. The experiment was performed with an autoclave system consisting of two vessels bridged by a cement-filled casing. After a partial bleed-off at the well-head, a sustained casing pressure was observed due to fluid flow through the cementsteel composite. The aim of our simulations is to investigate and quantify the permeability of the cement-steel composite. From our model results, we conclude that the flow occurred along a preferential flow path at the cement-steel interface. Thus, the inner part of the cement core was impermeable during the duration of the experiment. The preferential flow path can be described as a highly permeable and highly porous area with an aperture of about 5 mu m and a permeability of 3 . 10(-12) m(2) (3 Darcy). It follows that the fluid flow characteristics of a cemented area inside a borehole cannot be described using one permeability value for the entire cement-steel composite. Furthermore, it can be concluded that the quality of the cement and the filling process regarding the cement-steel interface is crucial to minimize possible well leakages. KW - borehole leakage KW - sustained casing pressure KW - permeability test KW - cement KW - modelling Y1 - 2020 U6 - https://doi.org/10.1007/s11242-020-01504-y SN - 0169-3913 SN - 1573-1634 VL - 136 IS - 1 SP - 125 EP - 145 PB - Springer CY - New York ER - TY - GEN A1 - Klose, Tim A1 - Chaparro, M. Carme A1 - Schilling, Frank A1 - Butscher, Christoph A1 - Klumbach, Steffen A1 - Blum, Philipp T1 - Fluid flow simulations of a large-scale borehole leakage experiment T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Borehole leakage is a common and complex issue. Understanding the fluid flow characteristics of a cemented area inside a borehole is crucial to monitor and quantify the wellbore integrity as well as to find solutions to minimise existing leakages. In order to improve our understanding of the flow behaviour of cemented boreholes, we investigated experimental data of a large-scale borehole leakage tests by means of numerical modelling using three different conceptual models. The experiment was performed with an autoclave system consisting of two vessels bridged by a cement-filled casing. After a partial bleed-off at the well-head, a sustained casing pressure was observed due to fluid flow through the cementsteel composite. The aim of our simulations is to investigate and quantify the permeability of the cement-steel composite. From our model results, we conclude that the flow occurred along a preferential flow path at the cement-steel interface. Thus, the inner part of the cement core was impermeable during the duration of the experiment. The preferential flow path can be described as a highly permeable and highly porous area with an aperture of about 5 mu m and a permeability of 3 . 10(-12) m(2) (3 Darcy). It follows that the fluid flow characteristics of a cemented area inside a borehole cannot be described using one permeability value for the entire cement-steel composite. Furthermore, it can be concluded that the quality of the cement and the filling process regarding the cement-steel interface is crucial to minimize possible well leakages. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1372 KW - borehole leakage KW - sustained casing pressure KW - permeability test KW - cement KW - modelling Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-573539 SN - 1866-8372 IS - 1 ER - TY - JOUR A1 - Koç, Gamze A1 - Natho, Stephanie A1 - Thieken, Annegret T1 - Estimating direct economic impacts of severe flood events in Turkey (2015-2020) JF - International journal of disaster risk reduction : IJDRR N2 - Over the past decades, floods have caused significant financial losses in Turkey, amounting to US$ 800 million between 1960 and 2014. With the Sendai Framework for Disaster Risk Reduction 2015-2030 (SFDRR), it is aimed to reduce the direct economic loss from disasters in relation to the global gross domestic product (GDP) by 2030. Accordingly, a methodology based on experiences from developing countries was proposed by the United Nations Office for Disaster Risk Reduction (UNDRR) to estimate direct economic losses on the macro-scale. Since Turkey also signed the SFDRR, we aimed to adapt, validate and apply the loss estimation model proposed by the UNDRR in Turkey for the first time. To do so, the well-documented flood event in Mersin of 2016 was used to calibrate the damage ratios for the agricultural, commercial and residential sectors, as well as educational facilities. Case studies between 2015 and 2020 with documented losses were further used to validate the model. Finally, model applications provided initial loss estimates for floods occurred recently in Turkey. Despite the limited event documentation for each sector, the calibrated model yielded good results when compared to documented losses. Thus, by implementing the UNDRR method, this study provides an approach to estimate the direct economic losses in Turkey on the macro-scale, which can be used to fill gaps in event databases, support the coordination of financial aid after flood events and facilitate monitoring of the progress toward and achievement of Global Target C of the Sendai Framework for Disaster Risk Reduction 2015-2030. KW - Direct economic loss KW - Flood KW - Turkey KW - Event documentation KW - UNISDR KW - Loss KW - modelling Y1 - 2021 U6 - https://doi.org/10.1016/j.ijdrr.2021.102222 SN - 2212-4209 VL - 58 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Senftleben, Robin T1 - Earth's magnetic field over the last 1000 years N2 - To investigate the reliability and stability of spherical harmonic models based on archeo/-paleomagnetic data, 2000 Geomagnetic models were calculated. All models are based on the same data set but with randomized uncertainties. Comparison of these models to the geomagnetic field model gufm1 showed that large scale magnetic field structures up to spherical harmonic degree 4 are stable throughout all models. Through a ranking of all models by comparing the dipole coefficients to gufm1 more realistic uncertainty estimates were derived than the authors of the data provide. The derived uncertainty estimates were used in further modelling, which combines archeo/-paleomagnetic and historical data. The huge difference in data count, accuracy and coverage of these two very different data sources made it necessary to introduce a time dependent spatial damping, which was constructed to constrain the spatial complexity of the model. Finally 501 models were calculated by considering that each data point is a Gaussian random variable, whose mean is the original value and whose standard deviation is its uncertainty. The final model arhimag1k is calculated by taking the mean of the 501 sets of Gauss coefficients. arhimag1k fits different dependent and independent data sets well. It shows an early reverse flux patch at the core-mantle boundary between 1000 AD and 1200 AD at the location of the South Atlantic Anomaly today. Another interesting feature is a high latitude flux patch over Greenland between 1200 and 1400 AD. The dipole moment shows a constant behaviour between 1600 and 1840 AD. In the second part of the thesis 4 new paleointensities from 4 different flows of the island Fogo, which is part of Cape Verde, are presented. The data is fitted well by arhimag1k with the exception of the value at 1663 of 28.3 microtesla, which is approximately 10 microtesla lower than the model suggest. N2 - Um die Stabilität und Zuverlässigkeit von sphärisch harmonischen Erdmagnetfeldmodellen, die auf paleomagnetischen und archeomagnetischen Daten basieren zu untersuchen wurden 2000 Erdmagnetfeldmodelle berechnet. Jedes dieser Modelle berechnet sich aus Daten, die mit zufälligen Unsicherheiten in die Inversion eingehen. Ein Vergleich dieser Modelle zum historischen Erdmagnetfeldmodell gufm1 zeigt, dass großflächige magnetische Strukturen bis zum sphärischen harmonischen Grad 4 stabil in allen Modellen sind. Ein Ranking der 2000 Modelle wurde verwendet, um realistischere Fehlerabschätzungen der Daten zu bekommen, als die, die von den Autoren angebeben werden. Diese Fehlerabschätzungen werden für die weitere Modellierung benutzt, welche historische und paleo-/archeomagnetiche Daten kombiniert. Der große Unterschied in der Anzahl der Daten und der räumlichen Verteilung dieser sehr verschiedenen Datenquellen machte es notwendig, eine zeitabhängige räumliche Dämpfung einzuführen. Diese ist so konstruiert, dass die räumlich Komplexität des Modelles in einem bestimmten Zeitintervall festgelegt wird. 501 Modelle wurde berechnet, indem jeder Datenpunkt als gaußsche Zufallsvariable gesehen wird mit dem Originalwert als Mittelwert und die Fehlerabschätzung als Standardabweichung. Das finale Modell arhimag1k berechnet sich aus dem Mittelwert der Gaußkoeffizienten aller 501 Modelle. arhimag1k fittet verschiedene abhängige und unabhängige Datensätze gut. Es zeigt eine frühe Anomaly an der Kern-Mantel Grenze zwischen 1000 und 1200 AD an der Lokation, wo auch die heutige Südatlantische Anomaly liegt. Eine andere interessante Auffälligkeit ist eine starke radiale Magnetfeldkomponente an der Kern-Mantel Grenze zwischen 1200 und 1400 AD über Grönland. Das Dipolmoment zeigt ein konstantes Verhalten von 1600 bis 1840 AD. Im zweiten Teil der Arbeit werden 4 neue Paleointensitäten der Insel Fogo, welches Teil von Kap Verde ist, presentiert. Diese neuen Daten werden gut von dem Modell arhimag1k gefittet, außer der Wert von 1663 AD mit 28.3 mikrotesla , welcher etwa 10 mikrotesla niedriger ist, als das Modell zeigt. T2 - Erdmagnetfeld der letzten 1000 Jahre KW - Earth's magnetic field KW - archeomagnetism KW - paleomagnetism KW - modelling KW - spherical harmonics KW - Erdmagnetfeld KW - Archäomagnetismus KW - Paläomagnetismus KW - Modellierung KW - Kugelflächenfunktionen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473150 ER - TY - THES A1 - Bäckemo, Johan Dag Valentin T1 - Digital tools and bioinspiration for the implementation in science and medicine T1 - Digitale Werkzeuge und Bioinspiration für die Umsetzung in der Wissenschaft und der Medizin N2 - Diese Doktorarbeit untersucht anhand dreier Beispiele, wie digitale Werkzeuge wie Programmierung, Modellierung, 3D-Konstruktions-Werkzeuge und additive Fertigung in Verbindung mit einer auf Biomimetik basierenden Design\-strategie zu neuen Analysemethoden und Produkten führen können, die in Wissenschaft und Medizin Anwendung finden. Das Verfahren der Funkenerosion (EDM) wird häufig angewandt, um harte Metalle zu verformen oder zu formen, die mit normalen Maschinen nur schwer zu bearbeiten sind. In dieser Arbeit wird eine neuartige Krümmungsanalysemethode als Alternative zur Rauheitsanalyse vorgestellt. Um besser zu verstehen, wie sich die Oberfläche während der Bearbeitungszeit des EDM-Prozesses verändert, wurde außerdem ein digitales Schlagmodell erstellt, das auf einem ursprünglich flachen Substrat Krater auf Erhebungen erzeugte. Es wurde festgestellt, dass ein Substrat bei etwa 10.000 Stößen ein Gleichgewicht erreicht. Die vorgeschlagene Krümmungsanalysemethode hat das Potenzial, bei der Entwicklung neuer Zellkultursubstrate für die Stammzellenforschung eingesetzt zu werden. Zwei Arten, die in dieser Arbeit aufgrund ihrer interessanten Mechanismen analysiert wurden, sind die Venusfliegenfalle und der Bandwurm. Die Venusfliegenfalle kann ihr Maul mit einer erstaunlichen Geschwindigkeit schließen. Der Schließmechanismus kann für die Wissenschaft interessant sein und ist ein Beispiel für ein so genanntes mechanisch bi-stabiles System - es gibt zwei stabile Zustände. Der Bandwurm ist bei Säugetieren meist im unteren Darm zu finden und heftet sich mit seinen Saugnäpfen an die Darmwände. Wenn der Bandwurm eine geeignete Stelle gefunden hat, stößt er seine Haken aus und heftet sich dauerhaft an die Wand. Diese Funktion könnte in der minimalinvasiven Medizin genutzt werden, um eine bessere Kontrolle der Implantate während des Implantationsprozesses zu ermöglichen. Für beide Projekte wurde ein mathematisches Modell, das so genannte Chained Beam Constraint Model (CBCM), verwendet, um das nichtlineare Biegeverhalten zu modellieren und somit vorherzusagen, welche Strukturen ein mechanisch bi-stabiles Verhalten aufweisen könnten. Daraufhin konnten zwei Prototypen mit einem 3D-Drucker gedruckt und durch Experimente veranschaulicht werden, dass sie beide ein bi-stabiles Verhalten aufweisen. Diese Arbeit verdeutlicht das hohe Anwendungspotenzial für neue Analysenmethoden in der Wissenschaft und für neue Medizinprodukte in der minimalinvasiven Medizin. N2 - Biomimicry is the art of mimicking nature to overcome a particular technical or scientific challenge. The approach studies how evolution has found solutions to the most complex problems in nature. This makes it a powerful method for science. In combination with the rapid development of manufacturing and information technologies into the digital age, structures and material that were before thought to be unrealizable can now be created with simple sketch and the touch of a button. This doctoral thesis had as its primary goal to investigate how digital tools, such as programming, modelling, 3D-Design tools and 3D-Printing, with the help from biomimicry, could lead to new analysis methods in science and new medical devices in medicine. The Electrical Discharge Machining (EDM) process is applied commonly to deform or mold hard metals that are difficult to work using normal machinery. A workpiece submerged in an electrolyte is deformed while being in close vicinity to an electrode. When high voltage is put between the workpiece and the electrode it will cause sparks that create cavitations on the substrate which in turn removes material and is flushed away by the electrolyte. Usually, such surfaces are analysed based on roughness, in this work another method using a novel curvature analysis method is presented as an alternative. In addition, to better understand how the surface changes during process time of the EDM process, a digital impact model was created which created craters on ridges on an originally flat substrate. These substrates were then analysed using the curvature analysis method at different processing times of the modelling. It was found that a substrate reaches an equilibrium at around 10000 impacts. The proposed curvature analysis method has potential to be used in the design of new cell culture substrates for stem cell. The Venus flytrap can shut its jaws at an amazing speed. The shutting mechanism may be interesting to use in science and is an example of a so-called mechanical bi-stable system – there are two stable states. In this work two truncated pyramid structures were modelled using a non-linear mechanical model called the Chained Beam Constraint Model (CBCM). The structure with a slope angle of 30 degrees is not bi-stable and the structure with a slope angle of 45 degrees is bi-stable. Developing this idea further by using PEVA, which has a shape-memory effect, the structure which is not bi-stable could be programmed to be bi-stable and then turned off again. This could be used as an energy storage system. Another species which has interesting mechanism is the tapeworm. Some species of this animal has a crown of hooks and suckers located on its side. The parasite commonly is found in mammals in the lower intestine and attaches to the walls by using its suckers. When the tapeworm has found a suitable spot, it ejects its hooks and permanently attaches to the wall. This function could be used in minimally invasive medicine to have better control of implants during the implantation process. By using the CBCM model and a 3D-printer capable of tuning how hard or soft a printed part is, a design strategy was developed to investigate how one could create a device that mimics the tapeworm. In the end a prototype was created which was able attach to a pork loin at an under pressure of 20 kPa and to ejects its hooks at an under pressure of 50 kPa or above. These three projects is an exhibit of how digital tools and biomimicry can be used together to come up with applicable solutions in science and in medicine. KW - bioinspiration KW - non-linear mechanics KW - modelling KW - shape-memory KW - additive manufacturing KW - Bioinspiration KW - nichtlineare Mechanik KW - Modellierung KW - Formgedächtnis KW - additive Fertigung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-571458 ER - TY - JOUR A1 - Marschall, Raphael A1 - Skorov, Yuri A1 - Zakharov, Vladimir A1 - Rezac, Ladislav A1 - Gerig, Selina-Barbara A1 - Christou, Chariton A1 - Dadzie, S. Kokou A1 - Migliorini, Alessandra A1 - Rinaldi, Giovanna A1 - Agarwal, Jessica A1 - Vincent, Jean-Baptiste A1 - Kappel, David T1 - Cometary comae-surface links the physics of gas and dust from the surface to a spacecraft JF - Space science reviews N2 - A comet is a highly dynamic object, undergoing a permanent state of change. These changes have to be carefully classified and considered according to their intrinsic temporal and spatial scales. The Rosetta mission has, through its contiguous in-situ and remote sensing coverage of comet 67P/Churyumov-Gerasimenko (hereafter 67P) over the time span of August 2014 to September 2016, monitored the emergence, culmination, and winding down of the gas and dust comae. This provided an unprecedented data set and has spurred a large effort to connect in-situ and remote sensing measurements to the surface. In this review, we address our current understanding of cometary activity and the challenges involved when linking comae data to the surface. We give the current state of research by describing what we know about the physical processes involved from the surface to a few tens of kilometres above it with respect to the gas and dust emission from cometary nuclei. Further, we describe how complex multidimensional cometary gas and dust models have developed from the Halley encounter of 1986 to today. This includes the study of inhomogeneous outgassing and determination of the gas and dust production rates. Additionally, the different approaches used and results obtained to link coma data to the surface will be discussed. We discuss forward and inversion models and we describe the limitations of the respective approaches. The current literature suggests that there does not seem to be a single uniform process behind cometary activity. Rather, activity seems to be the consequence of a variety of erosion processes, including the sublimation of both water ice and more volatile material, but possibly also more exotic processes such as fracture and cliff erosion under thermal and mechanical stress, sub-surface heat storage, and a complex interplay of these processes. Seasons and the nucleus shape are key factors for the distribution and temporal evolution of activity and imply that the heliocentric evolution of activity can be highly individual for every comet, and generalisations can be misleading. KW - comets KW - coma KW - gas KW - dust KW - dynamics KW - modelling KW - inversion Y1 - 2020 U6 - https://doi.org/10.1007/s11214-020-00744-0 SN - 0038-6308 SN - 1572-9672 VL - 216 IS - 8 PB - Springer CY - Dordrecht ER - TY - THES A1 - Reusser, Dominik Edwin T1 - Combining smart model diagnostics and effective data collection for snow catchments T1 - Zeitlich aufgelöste Modelldiagnose und kosteneffektive Messungen für Schneeeinzugsgebiete N2 - Complete protection against flood risks by structural measures is impossible. Therefore flood prediction is important for flood risk management. Good explanatory power of flood models requires a meaningful representation of bio-physical processes. Therefore great interest exists to improve the process representation. Progress in hydrological process understanding is achieved through a learning cycle including critical assessment of an existing model for a given catchment as a first step. The assessment will highlight deficiencies of the model, from which useful additional data requirements are derived, giving a guideline for new measurements. These new measurements may in turn lead to improved process concepts. The improved process concepts are finally summarized in an updated hydrological model. In this thesis I demonstrate such a learning cycle, focusing on the advancement of model evaluation methods and more cost effective measurements. For a successful model evaluation, I propose that three questions should be answered: 1) when is a model reproducing observations in a satisfactory way? 2) If model results deviate, of what nature is the difference? And 3) what are most likely the relevant model components affecting these differences? To answer the first two questions, I developed a new method to assess the temporal dynamics of model performance (or TIGER - TIme series of Grouped Errors). This method is powerful in highlighting recurrent patterns of insufficient model behaviour for long simulation periods. I answered the third question with the analysis of the temporal dynamics of parameter sensitivity (TEDPAS). For calculating TEDPAS, an efficient method for sensitivity analysis is necessary. I used such an efficient method called Fourier Amplitude Sensitivity Test, which has a smart sampling scheme. Combining the two methods TIGER and TEDPAS provided a powerful tool for model assessment. With WaSiM-ETH applied to the Weisseritz catchment as a case study, I found insufficient process descriptions for the snow dynamics and for the recession during dry periods in late summer and fall. Focusing on snow dynamics, reasons for poor model performance can either be a poor representation of snow processes in the model, or poor data on snow cover, or both. To obtain an improved data set on snow cover, time series of snow height and temperatures were collected with a cost efficient method based on temperature measurements on multiple levels at each location. An algorithm was developed to simultaneously estimate snow height and cold content from these measurements. Both, snow height and cold content are relevant quantities for spring flood forecasting. Spatial variability was observed at the local and the catchment scale with an adjusted sampling design. At the local scale, samples were collected on two perpendicular transects of 60 m length and analysed with geostatistical methods. The range determined from fitted theoretical variograms was within the range of the sampling design for 80% of the plots. No patterns were found, that would explain the random variability and spatial correlation at the local scale. At the watershed scale, locations of the extensive field campaign were selected according to a stratified sample design to capture the combined effects of elevation, aspect and land use. The snow height is mainly affected by the plot elevation. The expected influence of aspect and land use was not observed. To better understand the deficiencies of the snow module in WaSiM-ETH, the same approach, a simple degree day model was checked for its capability to reproduce the data. The degree day model was capable to explain the temporal variability for plots with a continuous snow pack over the entire snow season, if parameters were estimated for single plots. However, processes described in the simple model are not sufficient to represent multiple accumulation-melt-cycles, as observed for the lower catchment. Thus, the combined spatio-temporal variability at the watershed scale is not captured by the model. Further tests on improved concepts for the representation of snow dynamics at the Weißeritz are required. From the data I suggest to include at least rain on snow and redistribution by wind as additional processes to better describe spatio-temporal variability. Alternatively an energy balance snow model could be tested. Overall, the proposed learning cycle is a useful framework for targeted model improvement. The advanced model diagnostics is valuable to identify model deficiencies and to guide field measurements. The additional data collected throughout this work helps to get a deepened understanding of the processes in the Weisseritz catchment. N2 - Modelle zur Hochwasservorhersage und –warnung basieren auf einer bio-physikalisch Repräsentation der relevanten hydrologischen Prozesse. Eine Verbesserungen der Beschreibung dieser Prozesse kann zuverlässigere Vorhersagen ermöglichen. Dazu wird die Benutzung eines Lernzykluses bestehend aus einer kritische Beurteilung eines existierenden Modells, der Erhebung zusätzlicher Daten, der Bildung eines vertieften Verständnis und einer Überarbeitung des Modells vorgeschlagen. In dieser Arbeit wird ein solcher Lernzyklus aufgegriffen, wobei der Schwerpunkt auf einer verbesserten Modellanalyse und kosteneffizientere Messungen liegt. Für eine erfolgreiche Modellbeurteilung sind drei Fragen zu beantworten: 1) Wann reproduziert ein Modell die beobachteten Werte in einer zufriedenstellenden Weise (nicht)? 2) Wie lassen sich die Abweichungen charakterisieren? und 3) welches sind die Modellkomponenten, die diese Abweichungen bedingen? Um die ersten beiden Fragen zu beantworten, wird eine neue Methode zur Beurteilung des zeitlichen Verlaufs der Modellgüte vorgestellt. Eine wichtige Stärke ist, dass wiederholende Muster ungenügender Modellgüte auch für lange Simulationsläufe einfach identifiziert werden können. Die dritte Frage wird durch die Analyse des zeitlichen Verlaufs der Parametersensitivität beantwortet. Eine Kombination der beiden Methoden zur Beantwortung aller drei Fragen stellt ein umfangreiches Werkzeug für die Analyse hydrologischer Modelle zur Verfügung. Als Fallstudie wurde WaSiM-ETH verwendet, um das Einzugsgebiet der wilden Weißeritz zu modellieren. Die Modellanalyse von WaSiM-ETH hat ergeben, dass die Schneedynamik und die Rezession während trockener Perioden im Spätsommer und Herbst, für eine Beschreibung der Prozesse an der Weißeritz nicht geeignet sind. Die Erhebung zusätzlicher Daten zum besseren Verständnis der Schneedynamik bildet den nächste Schritt im Lernzyklus. Daten über Schneetemperaturen und Schneehöhen wurden mit Hilfe eines neuen, preisgünstigen Verfahrens erhoben. Dazu wurde die Temperatur an jedem Standort mit unterschiedlichen Abständen zum Boden gemessen und mit einem neuen Algorithmus in Schneehöhe und Kältegehalt umgerechnet. Die Schneehöhe und Kältegehalt sind wichtige Größen für die Vorhersage von Frühjahrshochwassern. Die räumliche Variabilität der Schneedecke auf der Einzugsgebietsskala wurde entsprechend der Landnutzung, der Höhenzone und der Ausrichtung stratifiziert untersucht, wobei lediglich der Einfluss der Höhe nachgewiesen werden konnte, während Ausrichtung und Landnutzung keinen statistisch signifikanten Einfluss hatten. Um die Defizite des WaSiM-ETH Schneemodules für die Beschreibung der Prozesse im Weißeritzeinzugsgebiets besser zu verstehen, wurde der gleiche konzeptionelle Ansatz als eigenständiges, kleines Modell benutzt, um die Dynamik in den Schneedaten zu reproduzieren. Während dieses Grad-Tag-Modell in der Lage war, den zeitlichen Verlauf für Flächen mit einer kontinuierlichen Schneedecke zu reproduzieren, konnte die Dynamik für Flächen mit mehreren Akkumulations- und Schmelzzyklen im unteren Einzugsgebiet vom Modell nicht abgebildet werden. Vorschläge zur Verbesserung des Modells werden in der Arbeit gemacht. Zusammenfassend hat sich das Lernzyklus-Konzept als nützlich erwiesen, um gezielt an einer Modellverbesserung zu arbeiten. Die differenzierte Modelldiagnose ist wertvoll, um Defizite im Modellkonzept zu identifizieren. Die während dieser Studie erhobenen Daten sind geeignet, um ein verbessertes Verständnis der Schnee-Prozesse an der Weißeritz zu erlangen. KW - Hydrologie KW - Modellierung KW - Modell Diagnose KW - Schnee KW - Sensitivitätsanalyse KW - hydrology KW - modelling KW - model diagnostics KW - snow KW - sensitivity analysis Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52574 ER - TY - THES A1 - Huber, Veronika Emilie Charlotte T1 - Climate impact on phytoplankton blooms in shallow lakes T1 - Der Einfluss des Klimas auf Algenblüten in Flachseen N2 - Lake ecosystems across the globe have responded to climate warming of recent decades. However, correctly attributing observed changes to altered climatic conditions is complicated by multiple anthropogenic influences on lakes. This thesis contributes to a better understanding of climate impacts on freshwater phytoplankton, which forms the basis of the food chain and decisively influences water quality. The analyses were, for the most part, based on a long-term data set of physical, chemical and biological variables of a shallow, polymictic lake in north-eastern Germany (Müggelsee), which was subject to a simultaneous change in climate and trophic state during the past three decades. Data analysis included constructing a dynamic simulation model, implementing a genetic algorithm to parameterize models, and applying statistical techniques of classification tree and time-series analysis. Model results indicated that climatic factors and trophic state interactively determine the timing of the phytoplankton spring bloom (phenology) in shallow lakes. Under equally mild spring conditions, the phytoplankton spring bloom collapsed earlier under high than under low nutrient availability, due to a switch from a bottom-up driven to a top-down driven collapse. A novel approach to model phenology proved useful to assess the timings of population peaks in an artificially forced zooplankton-phytoplankton system. Mimicking climate warming by lengthening the growing period advanced algal blooms and consequently also peaks in zooplankton abundance. Investigating the reasons for the contrasting development of cyanobacteria during two recent summer heat wave events revealed that anomalously hot weather did not always, as often hypothesized, promote cyanobacteria in the nutrient-rich lake studied. The seasonal timing and duration of heat waves determined whether critical thresholds of thermal stratification, decisive for cyanobacterial bloom formation, were crossed. In addition, the temporal patterns of heat wave events influenced the summer abundance of some zooplankton species, which as predators may serve as a buffer by suppressing phytoplankton bloom formation. This thesis adds to the growing body of evidence that lake ecosystems have strongly responded to climatic changes of recent decades. It reaches beyond many previous studies of climate impacts on lakes by focusing on underlying mechanisms and explicitly considering multiple environmental changes. Key findings show that climate impacts are more severe in nutrient-rich than in nutrient-poor lakes. Hence, to develop lake management plans for the future, limnologists need to seek a comprehensive, mechanistic understanding of overlapping effects of the multi-faceted human footprint on aquatic ecosystems. N2 - Weltweit haben Seeökosysteme auf den Klimawandel der letzten Jahrzehnte reagiert. Beobachtete Veränderungen eindeutig dem Klimawandel zuzuordnen, wird jedoch häufig dadurch erschwert, dass Seen gleichzeitig vielfachen anthropogenen Einflüssen ausgesetzt sind. Diese Arbeit trägt zu einem besseren Verständnis des Klimaeinflusses auf Algen bei, die am Anfang der Nahrungskette stehen und maßgeblich die Wasserqualität eines Sees beeinflussen können. Zum größten Teil stützt sich die Arbeit auf eine dreißigjährige Datenreihe eines unregelmäßig geschichteten Flachsees im Nordosten von Deutschland (Müggelsee), in dem sowohl steigende Wassertemperaturen als auch sinkende Nährstoffeinträge zu verzeichnen waren. Bei der Datenanalyse wurde ein neu erstelltes dynamisches Simulationsmodell, genetische Algorithmen zur Parametrisierung von Modellen, und statistische Methoden der Klassifizierung und Zeitreihenanalyse genutzt. Ergebnisse dieser Arbeit zeigen, dass nicht nur klimatische Faktoren sondern auch die Nährstoffverfügbarkeit im See den Zeitpunkt der Algenfrühjahrsblüte (Phänologie) beeinflussen. Durch eine Veränderung der Mechanismen, die zum Kollaps der Blüte führen, trat diese trotz ähnlich milder Winterbedingungen bei hoher Nährstoffverfügbarkeit früher auf als bei niedriger. Ein neuentwickelter Ansatz zur Modellierung von Phänologie erwies sich als geeignet, um vorherzusagen, wann Algen und ihre Räuber in einem künstlich periodisch angetriebenen Laborsystem ihre Populationshöhepunkte erreichten. Eine Verlängerung der Wachstumsperiode führte dazu, dass diese früher auftraten. Die Untersuchung, warum sich Blaualgen im betrachteten See während jüngster Hitzewellenereignisse überraschend unterschiedlich entwickelt hatten, ergab, dass ungewöhnlich warmes Wetter nicht wie häufig vermutet generell förderlich für ihre Entwicklung ist. Der Zeitpunkt und die Dauer der Hitzewellen waren entscheidend dafür, ob für Blaualgen kritische Schwellenwerte der thermischen Schichtung im See überschritten wurden. Zudem zeigte sich, dass saisonale Erwärmungsmuster einen bedeutenden Einfluss auf Räuber nahmen, die das Auftreten von Algenblüten verhindern können. Diese Arbeit reiht sich in eine wachsende Anzahl von Studien ein, die zeigen, dass Seeökosysteme bereits stark auf die Klimaveränderungen der letzen Jahrzehnte reagiert haben. Mit ihrem Fokus auf Mechanismen und der expliziten Berücksichtigung simultaner anthropogener Einflüsse geht diese Arbeit gleichzeitig über viele bisherige Studien hinaus, die sich auf reine Beobachtung und die Betrachtung klimatischer Faktoren beschränkten. Kernergebnisse deuten daraufhin, dass Klimafolgen in nährstoffreichen Seen stärker ausfallen als in nährstoffarmen Seen. Nur mit einem umfassenden, mechanistischen Verständnis des vielfältigen anthropogenen Einflusses wird eine hohe Wasserqualität in Seen auch in Zukunft aufrechtzuerhalten sein. KW - Klimawandel KW - Gewässer KW - Phytoplankton KW - Phänologie KW - Modellierung KW - climate change KW - freshwater KW - phytoplankton KW - phenology KW - modelling Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-42346 ER - TY - JOUR A1 - Becher, Matthias A. A1 - Grimm, Volker A1 - Thorbek, Pernille A1 - Horn, Juliane A1 - Kennedy, Peter J. A1 - Osborne, Juliet L. T1 - BEEHAVE: a systems model of honeybee colony dynamics and foraging to explore multifactorial causes of colony failure JF - Journal of applied ecology : an official journal of the British Ecological Society N2 - BEEHAVE offers a valuable tool for researchers to design and focus field experiments, for regulators to explore the relative importance of stressors to devise management and policy advice and for beekeepers to understand and predict varroa dynamics and effects of management interventions. We expect that scientists and stakeholders will find a variety of applications for BEEHAVE, stimulating further model development and the possible inclusion of other stressors of potential importance to honeybee colony dynamics. KW - Apis mellifera KW - colony decline KW - cross-level interactions KW - feedbacks KW - foraging KW - modelling KW - multiple stressors KW - multi-agent simulation KW - predictive systems ecology KW - Varroa destructor Y1 - 2014 U6 - https://doi.org/10.1111/1365-2664.12222 SN - 0021-8901 SN - 1365-2664 VL - 51 IS - 2 SP - 470 EP - 482 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Rolph, Rebecca A1 - Overduin, Pier Paul A1 - Ravens, Thomas A1 - Lantuit, Hugues A1 - Langer, Moritz T1 - ArcticBeach v1.0 BT - a physics-based parameterization of pan-Arctic coastline erosion JF - Frontiers in Earth Science N2 - In the Arctic, air temperatures are increasing and sea ice is declining, resulting in larger waves and a longer open water season, all of which intensify the thaw and erosion of ice-rich coasts. Climate change has been shown to increase the rate of Arctic coastal erosion, causing problems for Arctic cultural heritage, existing industrial, military, and civil infrastructure, as well as changes in nearshore biogeochemistry. Numerical models that reproduce historical and project future Arctic erosion rates are necessary to understand how further climate change will affect these problems, and no such model yet exists to simulate the physics of erosion on a pan-Arctic scale. We have coupled a bathystrophic storm surge model to a simplified physical erosion model of a permafrost coastline. This Arctic erosion model, called ArcticBeach v1.0, is a first step toward a physical parameterization of Arctic shoreline erosion for larger-scale models. It is forced by wind speed and direction, wave period and height, sea surface temperature, all of which are masked during times of sea ice cover near the coastline. Model tuning requires observed historical retreat rates (at least one value), as well as rough nearshore bathymetry. These parameters are already available on a pan-Arctic scale. The model is validated at three study sites at 1) Drew Point (DP), Alaska, 2) Mamontovy Khayata (MK), Siberia, and 3) Veslebogen Cliffs, Svalbard. Simulated cumulative retreat rates for DP and MK respectively (169 and 170 m) over the time periods studied at each site (2007-2016, and 1995-2018) are found to the same order of magnitude as observed cumulative retreat (172 and 120 m). The rocky Veslebogen cliffs have small observed cumulative retreat rates (0.05 m over 2014-2016), and our model was also able to reproduce this same order of magnitude of retreat (0.08 m). Given the large differences in geomorphology between the study sites, this study provides a proof-of-concept that ArcticBeach v1.0 can be applied on very different permafrost coastlines. ArcticBeach v1.0 provides a promising starting point to project retreat of Arctic shorelines, or to evaluate historical retreat in places that have had few observations. KW - permafrost KW - erosion KW - modelling KW - arctic KW - climate change Y1 - 2022 U6 - https://doi.org/10.3389/feart.2022.962208 SN - 2296-6463 VL - 10 PB - Frontiers Media CY - Lausanne ER - TY - THES A1 - Becker, Basil T1 - Architectural modelling and verification of open service-oriented systems of systems T1 - Architekturmodellierung und Verifikation von offenen und service-orientierten Systems of Systems N2 - Systems of Systems (SoS) have received a lot of attention recently. In this thesis we will focus on SoS that are built atop the techniques of Service-Oriented Architectures and thus combine the benefits and challenges of both paradigms. For this thesis we will understand SoS as ensembles of single autonomous systems that are integrated to a larger system, the SoS. The interesting fact about these systems is that the previously isolated systems are still maintained, improved and developed on their own. Structural dynamics is an issue in SoS, as at every point in time systems can join and leave the ensemble. This and the fact that the cooperation among the constituent systems is not necessarily observable means that we will consider these systems as open systems. Of course, the system has a clear boundary at each point in time, but this can only be identified by halting the complete SoS. However, halting a system of that size is practically impossible. Often SoS are combinations of software systems and physical systems. Hence a failure in the software system can have a serious physical impact what makes an SoS of this kind easily a safety-critical system. The contribution of this thesis is a modelling approach that extends OMG's SoaML and basically relies on collaborations and roles as an abstraction layer above the components. This will allow us to describe SoS at an architectural level. We will also give a formal semantics for our modelling approach which employs hybrid graph-transformation systems. The modelling approach is accompanied by a modular verification scheme that will be able to cope with the complexity constraints implied by the SoS' structural dynamics and size. Building such autonomous systems as SoS without evolution at the architectural level --- i. e. adding and removing of components and services --- is inadequate. Therefore our approach directly supports the modelling and verification of evolution. N2 - Systems of Systems (SoS) sind ein seit längerem bekanntes Konzept, das jedoch in letzter Zeit vermehrt Aufmerksamkeit erhielt. Das Hauptaugenmerk dieser Arbeit wird auf SoS liegen, die mit Hilfe von Techniken aus Service-Orientierten Architekturen erstellt werden. Somit vereinen die hier betrachteten SoS die Vorteile und Herausforderungen beider Paradigmen. SoS können definiert werden als Zusammenschlüsse einzelner, autonomer Systeme, die zu einem größeren System integriert werden. In diesem Zusammenhang interessant ist, dass die ehemals isolierten Systeme nach wie vor isoliert voneinander weiterentwickelt und gewartet werden. Desweiteren kommt der Strukturdynamik innerhalb des SoS eine beachtliche Bedeutung zu, da jederzeit Systeme dem SoS beitreten und es verlassen können. Zusammen mit der Tatsache, dass die Kooperationen zwischen den konstituierenden Systemen nicht immer beobachtbar sind, führt dies dazu, dass wir diese Systeme als offene Systeme bezeichnen. Wobei das System natürlich jederzeit eine klar definierte Grenze besitzt, diese aber nur durch ein Anhalten des Systems zu bestimmen ist. Dies jedoch ist, von einer praktischen Perspektive aus betrachtet, unmöglich. Häufig stellen SoS eine Kombination aus Softwaresystemen und pyhsikalischen Systemen dar mit der Folge, dass ein Fehler in der Software eine SoS schnell eine immense physikalische Wirkung entwickeln kann. Von daher fallen SoS leicht in die Klasse der sicherheitskritischen Systeme. In dieser Arbeit werden wir einen Modellierungsansatz vorstellen, der die Sprache SoaML der OMG erweitert. Die grundlegenden Konzepte dieses Ansatzes sind die Modellierung mit Kollaborationen und Rollen als Abstraktionsebene über Komponenten. Der vorgestellte Ansatz erlaubt es uns SoS auf einer architekturellen Ebene zu betrachten. Die formale Semantik unseres Modellierungsansatzes ist durch hybride Graphtransformationssysteme gegeben. Abgestimmt auf die Modellierung werden wir ebenfalls ein Verfahren zu Verifikation von SoS vorstellen, welches trotz der inhärenten Komplexität von SoS, diese zu verifizieren. Die Modellierung und Verifikation von Evolution wird von unserem Ansatz direkt unterstützt. KW - Modellierung KW - Verifikation KW - Evolution KW - Systems of Systems KW - Service-orientierte Systeme KW - modelling KW - verification KW - evolution KW - systems of systems KW - service-oriented systems Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-70158 ER -