TY - JOUR A1 - Yadavalli, Nataraja Sekhar A1 - Loebner, Sarah A1 - Papke, Thomas A1 - Sava, Elena A1 - Hurduc, Nicolae A1 - Santer, Svetlana T1 - A comparative study of photoinduced deformation in azobenzene containing polymer films JF - Soft matter N2 - In this paper two groups supporting different views on the mechanism of light induced polymer deformation argue about the respective underlying theoretical conceptions, in order to bring this interesting debate to the attention of the scientific community. The group of Prof. Nicolae Hurduc supports the model claiming that the cyclic isomerization of azobenzenes may cause an athermal transition of the glassy azobenzene containing polymer into a fluid state, the so-called photo-fluidization concept. This concept is quite convenient for an intuitive understanding of the deformation process as an anisotropic flow of the polymer material. The group of Prof. Svetlana Santer supports the re-orientational model where the mass-transport of the polymer material accomplished during polymer deformation is stated to be generated by the light-induced re-orientation of the azobenzene side chains and as a consequence of the polymer backbone that in turn results in local mechanical stress, which is enough to irreversibly deform an azobenzene containing material even in the glassy state. For the debate we chose three polymers differing in the glass transition temperature, 32 degrees C, 87 degrees C and 95 degrees C, representing extreme cases of flexible and rigid materials. Polymer film deformation occurring during irradiation with different interference patterns is recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. We also demonstrated the unique behaviour of azobenzene containing polymeric films to switch the topography in situ and reversibly by changing the irradiation conditions. We discuss the results of reversible deformation of three polymers induced by irradiation with intensity (IIP) and polarization (PIP) interference patterns, and the light of homogeneous intensity in terms of two approaches: the re-orientational and the photo-fluidization concepts. Both agree in that the formation of opto-mechanically induced stresses is a necessary prerequisite for the process of deformation. Using this argument, the deformation process can be characterized either as a flow or mass transport. Y1 - 2016 U6 - https://doi.org/10.1039/c6sm00029k SN - 1744-683X SN - 1744-6848 VL - 12 SP - 2593 EP - 2603 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Kopyshev, Alexey A1 - Galvin, Casey J. A1 - Patil, Rohan R. A1 - Genzer, Jan A1 - Lomadze, Nino A1 - Feldmann, David A1 - Zakrevski, Juri A1 - Santer, Svetlana T1 - Light-Induced Reversible Change of Roughness and Thickness of Photosensitive Polymer Brushes JF - Applied physics : A, Materials science & processing N2 - We investigate light-induced changes in thickness and roughness of photosensitive polymer brushes containing azobenzene cationic surfactants by atomic force microscopy (AFM) in real time during light irradiation. Because the cis-state of azobenzene unit requires more free volume than its trans counterpart, the UV light-induced expansion of polymer thin films associated with the trans-to-cis isomerism of azobenzene groups is expected to occur. This phenomenon is well documented in physisorbed polymer films containing azobenzene groups. In contrast, photosensitive polymer brushes show a decrease in thickness under UV irradiation. We have found that the azobenzene surfactants in their trans-state form aggregates within the brush. Under irradiation, the surfactants undergo photoisomerization to the cis-state, which is more hydrophilic. As a consequence, the aggregates within the brush are disrupted, and the polymer brush contracts. When subsequently irradiated with blue light the polymer brush thickness returns back to its initial value. This behavior is related to isomerization of the surfactant to the more hydrophobic trans-state and subsequent formation of surfactant aggregates within the polymer brush. The photomechanical function of the dry polymer brush, i.e., contraction and expansion, was found to be reversible with repeated irradiation cycles and requires only a few seconds for switching. In addition to the thickness change, the roughness of the brush also changes reversibly between a few Angstroms (blue light) and several nanometers (UV light). Photosensitive polymer brushes represent smart films with light responsive thickness and roughness that could be used for generating dynamic fluctuating surfaces, the function of which can be turned on and off in a controllable manner on a nanometer length scale. KW - photosensitive brushes KW - azobenzene containing surfactants KW - light driven reversible change of surface topography and thickness KW - domain memory in polymer brushes KW - orientation of azobenzenes in polymer brushes Y1 - 2016 U6 - https://doi.org/10.1021/acsami.6b06881 SN - 1944-8244 VL - 8 SP - 19175 EP - 19184 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Feldmann, David A1 - Maduar, Salim R. A1 - Santer, Mark A1 - Lomadze, Nino A1 - Vinogradova, Olga I. A1 - Santer, Svetlana T1 - Manipulation of small particles at solid liquid interface BT - light driven diffusioosmosis JF - Scientific reports N2 - The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans- and cis- isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area. KW - genomic DNA conformation KW - photosensitive surfactants KW - optical manipulation KW - photocontrol KW - azobenzene KW - films KW - gradients KW - transport KW - tracking KW - brushes Y1 - 2016 U6 - https://doi.org/10.1038/srep36443 SN - 2045-2322 VL - 6 PB - Nature Publishing Group CY - London ER - TY - GEN A1 - Feldmann, David A1 - Maduar, Salim R. A1 - Santer, Mark A1 - Lomadze, Nino A1 - Vinogradova, Olga I. A1 - Santer, Svetlana T1 - Manipulation of small particles at solid liquid interface BT - light driven diffusioosmosis N2 - The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans- and cis- isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 293 KW - azobenzene KW - brushes KW - films KW - genomic DNA conformation KW - gradients KW - optical manipulation KW - photocontrol KW - photosensitive surfactants KW - tracking KW - transport Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-100338 ER - TY - JOUR A1 - Feldmann, David A1 - Maduar, Salim R. A1 - Santer, Mark A1 - Lomadze, Nino A1 - Vinogradova, Olga I. A1 - Santer, Svetlana T1 - Manipulation of small particles at solid liquid interface: light driven diffusioosmosis JF - Scientific reports N2 - The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans-and cis-isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area. Y1 - 2016 U6 - https://doi.org/10.1038/srep36443 SN - 2045-2322 VL - 6 SP - 25083 EP - 25091 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Loebner, Sarah A1 - Jelken, Joachim A1 - Yadavalli, Nataraja Sekhar A1 - Sava, Elena A1 - Hurduc, Nicolae A1 - Santer, Svetlana T1 - Motion of Adsorbed Nano-Particles on Azobenzene Containing Polymer Films JF - Molecules N2 - We demonstrate in situ recorded motion of nano-objects adsorbed on a photosensitive polymer film. The motion is induced by a mass transport of the underlying photoresponsive polymer material occurring during irradiation with interference pattern. The polymer film contains azobenzene molecules that undergo reversible photoisomerization reaction from trans-to cis-conformation. Through a multi-scale chain of physico-chemical processes, this finally results in the macro-deformations of the film due to the changing elastic properties of polymer. The topographical deformation of the polymer surface is sensitive to a local distribution of the electrical field vector that allows for the generation of dynamic changes in the surface topography during irradiation with different light interference patterns. Polymer film deformation together with the motion of the adsorbed nano-particles are recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the surface deformation. The particles undergo either translational or rotational motion. The direction of particle motion is towards the topography minima and opposite to the mass transport within the polymer film. The ability to relocate particles by photo-induced dynamic topography fluctuation offers a way for a non-contact simultaneous manipulation of a large number of adsorbed particles just in air at ambient conditions. KW - motion of adsorbed nano-particles KW - azobenzene containing polymer films KW - fluctuating surfaces Y1 - 2016 U6 - https://doi.org/10.3390/molecules21121663 SN - 1420-3049 VL - 21 SP - 397 EP - 411 PB - MDPI CY - Basel ER - TY - JOUR A1 - Schimka, Selina A1 - Santer, Svetlana A1 - Mujkic-Ninnemann, Nina M. A1 - Bleger, David A1 - Hartmann, Laura A1 - Wehle, Marko A1 - Lipowsky, Reinhard A1 - Santer, Mark T1 - Photosensitive Peptidomimetic for Light-Controlled, Reversible DNA Compaction JF - Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences N2 - Light-induced DNA compaction as part of nonviral gene delivery was investigated intensively in the past years, although the bridging between the artificial light switchable compacting.agents and biodompatible light insensitive compacting agents was not achieved until now. In this paper, we report on light-induced compaction and decompaction of DNA molecules in the presence of a new typeof agent, a multivalent cationic peptidomimetic molecule containing a photosensitive Azo-group as a branch (Azo-PM). Az-o-PM is synthesized using a solid-phase procedure during Which anrazoberizene unit is attached as a side chain to an Oligo(arnidoamine) backbone. We shoW, that within a-certain Tange,of concentrations and under illumination with light of appropriate-wavelengths, these cationic Molecules induce reversible DNA compaction/decompaction by photo-isomerization of the incorporated azobenzene unit between a hydrophobic trans- and 4 hydrophilic cis-conformation, as characterized by dynamic light scattering and AFM measurements. In contrast to other molecular Species used for invasive DNA compaction, such as-widely used azobenzene containing cationic surfactant (Azo-TAR, C-4-Azo-OCX-TMAB), the presented peptidomimetic agent appears to lead to different compleication/compaction mechanisms., An investigation of Ato-PM in close proximity to a DNA segment by means of a molecular dynamics simulation sustains a picture in which Azo-PM acts as a multivalent counterion, with its rather large cationic oligo(amidoamine) backbone dominating the interaction with the double helix, fine-tuned or assisted by the presence" andisomerization state of the Azo-moiety. However, due to its peptidomimetic backbone, Azo-PM should be far less toxic than photosensitive surfactants and might represent a starting point for a conscious design of photoswitchable, biocompatible vectors for gene delivery. Y1 - 2016 U6 - https://doi.org/10.1021/acs.biomac.6b00052 SN - 1525-7797 SN - 1526-4602 VL - 17 SP - 1959 EP - 1968 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kopyshev, Alexey A1 - Galvin, Casey J. A1 - Genzer, Jan A1 - Lomadze, Nino A1 - Santer, Svetlana T1 - Polymer brushes modified by photosensitive azobenzene containing polyamines JF - Polymer : the international journal for the science and technology of polymers N2 - This paper describes a strategy for preparing photosensitive polymeric grafts on flat solid surfaces by loading diblock-copolymer or homopolymer brushes with cationic azobenzene-containing surfactants. In contrast to previous work, we utilize photosensitive surfactants that bear positively-charged polyamine head groups whose charge varies between 1(+) and 3(+). Poly(methylmethacrylate-b-methacrylic acid) (PMMA-b-PMAA) brushes were prepared by employing atom transfer radical polymerization, where the bottom poly(methyl methacrylate) block was grown first followed by the synthesis of t-butyl methacrylate block that after de-protection yielded poly(methacrylic acid). We used PMMA-b-PMAA brushes with constant grafting density and length of the PMMA block, and three different lengths of the PMAA block. The azobenzene-based surfactants attached only to the PMAA block. The degree of binding (i.e., the number of surfactant molecules per binding site on the brush backbone) of the surfactants to the brush depends strongly on the valence of the surfactant head-group; within the brushes the concentration of the surfactant carrying unit charge is larger than that of multivalent surfactants. We detect pronounced response of the brush topography on irradiation with UV interference pattern even at very low degree of binding (as small as 0.08) of multi-valence surfactant. Areas on the sample that receive the highest UV dose exhibit chain scission. By removing the ruptured chains from the substrate via good solvent, one uncovers a surface topographical relief grating, whose spatial arrangement follows the intensity distribution of the UV light on the sample during irradiation. Due to strong coupling of the multi-valence surfactants to the polymer brush, it was possible in some cases to completely remove the polyelectrolyte block from the PMMA layer. The application of multi-valence azobenzene surfactants for triggering brush photosensitive has important advantage over usage of surfactant with unit charge because relative to single-valence surfactants much lower concentrations of the multivalent surfactant are needed to achieve comparable response upon UV irradiation. (C) 2016 Elsevier Ltd. All rights reserved. KW - Photosensitive brushes KW - Photosensitive azobenzene containing polyamines Y1 - 2016 U6 - https://doi.org/10.1016/j.polymer.2016.03.050 SN - 0032-3861 SN - 1873-2291 VL - 98 SP - 421 EP - 428 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Moradi, N. A1 - Zakrevskyy, Yuriy A1 - Javadi, A. A1 - Aksenenko, E. V. A1 - Fainerman, V. B. A1 - Lomadze, Nino A1 - Santer, Svetlana A1 - Miller, R. T1 - Surface tension and dilation rheology of DNA solutions in mixtures with azobenzene-containing cationic surfactant JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - The surface tension and dilational surface visco-elasticity of the individual solutions of the biopolymer DNA and the azobenzene-containing cationic surfactant AzoTAB, as well as their mixtures were measured using the drop profile analysis tensiometry. The negatively charged DNA molecules form complexes with the cationic surfactant AzoTAB. Mixed DNA + AzoTAB solutions exhibit high surface activity and surface layer elasticity. Extremes in the dependence of these characteristics on the AzoTAB concentration exist within the concentration range of 3 x 10(-6)-5 x 10(-5) M. The surface tension of the mixture shows a minimum with a subsequent maximum. In the same concentration range the elasticity shows first a maximum and then a subsequent minimum. A recently developed thermodynamic model was modified to account for the dependence of the adsorption equilibrium constant of the adsorbed complex on the cationic surfactant concentration. This modified theory shows good agreement with the experimental data both for the surface tension and the elasticity values over the entire range of studied AzoTAB concentrations. (C) 2016 Elsevier B.V. All rights reserved. KW - Mixed adsorption layers KW - Polymer/surfactant interaction KW - Water/air interface KW - Thermodynamics of adsorption KW - Dilational rheology KW - Drop profile analysis tensiometry Y1 - 2016 U6 - https://doi.org/10.1016/j.colsurfa.2016.04.021 SN - 0927-7757 SN - 1873-4359 VL - 505 SP - 186 EP - 192 PB - Elsevier CY - Amsterdam ER -