TY - JOUR A1 - Müller, Steffen A1 - Mayer, Patrizia A1 - Baur, Heiner A1 - Mayer, Frank T1 - Higher velocities in isokinetic dynamometry a pilot study of new test mode with active compensation of inertia JF - Isokinetics and exercise science : official journal of the European Isokinetic Society N2 - Isokinetic dynamometry is a standard technique for strength testing and training. Nevertheless reliability and validity is limited due to inertia effects, especially for high velocities. Therefore in a first methodological approach the purpose was to evaluate a new isokinetic measurement mode including inertia compensation compared to a classic isokinetic measurement mode for single and multijoint movements at different velocities. Isokinetic maximum strength measurements were carried out in 26 healthy active subjects. Tests were performed using classic isokinetic and new isokinetic mode in random order. Maximum torque/force, maximum movement velocity and time for acceleration were calculated. For inter-instrument agreement Bland and Altman analysis, systematic and random error was quantified. Differences between both methods were assessed (ANOVA alpha = 0.05). Bland and Altman analysis showed the highest agreement between the two modes for strength and velocity measurements (bias: < +/- 1.1%; LOA: < 14.2%) in knee flexion/extension at slow isokinetic velocity (60 degrees/s). Least agreement (range: bias: -67.6% +/- 119.0%; LOA: 53.4% 69.3%) was observed for shoulder/arm test at high isokinetic velocity (360 degrees/s). The Isokin(new) mode showed higher maximum movement velocities (p < 0.05). For low isokinetic velocities the new mode agrees with the classic mode. Especially at high isokinetic velocities the new isokinetic mode shows relevant benefits coupled with a possible trade-off with the force/torque measurement. In conclusion, this study offers for the first time a comparison between the 'classical' and inertia-compensated isokinetic dynamometers indicating the advantages and disadvantages associated with each individual approach, particularly as they relate to medium or high velocities in testing and training. KW - Strength testing KW - concentric KW - validity KW - trunk KW - knee KW - shoulder Y1 - 2011 U6 - https://doi.org/10.3233/IES-2011-0398 SN - 0959-3020 VL - 19 IS - 2 SP - 63 EP - 70 PB - IOS Press CY - Amsterdam ER - TY - JOUR A1 - Grüne, Stefanie T1 - Is there a Gap in Kant's B Deduction? JF - International journal of philosophical studies N2 - In 'Beyond the Myth of the Myth: A Kantian Theory of Non-Conceptual Content', Robert Hanna argues for a very strong kind of non-conceptualism, and claims that this kind of non-conceptualism originally has been developed by Kant. But according to 'Kant's Non-Conceptualism, Rogue Objects and the Gap in the B Deduction', Kant's non-conceptualism poses a serious problem for his argument for the objective validity of the categories, namely the problem that there is a gap in the B Deduction. This gap is that the B Deduction goes through only if conceptualism is true, but Kant is a non-conceptualist. In this paper, I will argue, contrary to what Hanna claims, that there is not a gap in the B Deduction. KW - Kant KW - concepts KW - non-conceptualism KW - intuition KW - synthesis Y1 - 2011 U6 - https://doi.org/10.1080/09672559.2011.595196 SN - 0967-2559 VL - 19 IS - 3 SP - 465 EP - 490 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - CHAP A1 - Laucht, Manfred A1 - Blomeyer, Dorothea A1 - El-Faddagh, Mahha A1 - Esser, Günter A1 - Schmidt, Martin A1 - Banaschewski, Tobias A1 - Becker, Katja T1 - Are regulatory problems in infancy precursors of ADHD in childhood? a moderating role for the dopamine D4 receptor gene T2 - Infant mental health journal Y1 - 2011 SN - 0163-9641 VL - 32 IS - 3 SP - 212 EP - 212 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Rivera Villarreyes, C. A. A1 - Baroni, Gabriele A1 - Oswald, Sascha T1 - Integral quantification of seasonal soil moisture changes in farmland by cosmic-ray neutrons JF - Hydrology and earth system sciences : HESS N2 - Soil moisture at the plot or hill-slope scale is an important link between local vadose zone hydrology and catchment hydrology. However, so far only a few methods are on the way to close this gap between point measurements and remote sensing. One new measurement methodology that could determine integral soil moisture at this scale is the aboveground sensing of cosmic-ray neutrons, more precisely of ground albedo neutrons. The present study performed ground albedo neutron sensing (GANS) at an agricultural field in northern Germany. To test the method it was accompanied by other soil moisture measurements for a summer period with corn crops growing on the field and a later autumn-winter period without crops and a longer period of snow cover. Additionally, meteorological data and aboveground crop biomass were included in the evaluation. Hourly values of ground albedo neutron sensing showed a high statistical variability. Six-hourly values corresponded well with classical soil moisture measurements, after calibration based on one reference dry period and three wet periods of a few days each. Crop biomass seemed to influence the measurements only to minor degree, opposed to snow cover which has a more substantial impact on the measurements. The latter could be quantitatively related to a newly introduced field neutron ratio estimated from neutron counting rates of two energy ranges. Overall, our study outlines a procedure to apply the ground albedo neutron sensing method based on devices now commercially available, without the need for accompanying numerical simulations and suited for longer monitoring periods after initial calibration. Y1 - 2011 U6 - https://doi.org/10.5194/hess-15-3843-2011 SN - 1027-5606 VL - 15 IS - 12 SP - 3843 EP - 3859 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Munz, Matthias A1 - Oswald, Sascha A1 - Schmidt, C. T1 - Sand box experiments to evaluate the influence of subsurface temperature probe design on temperature based water flux calculation JF - Hydrology and earth system sciences : HESS N2 - Quantification of subsurface water fluxes based on the one dimensional solution to the heat transport equation depends on the accuracy of measured subsurface temperatures. The influence of temperature probe setup on the accuracy of vertical water flux calculation was systematically evaluated in this experimental study. Four temperature probe setups were installed into a sand box experiment to measure temporal highly resolved vertical temperature profiles under controlled water fluxes in the range of +/- 1.3 md(-1). Pass band filtering provided amplitude differences and phase shifts of the diurnal temperature signal varying with depth depending on water flux. Amplitude ratios of setups directly installed into the saturated sediment significantly varied with sand box hydraulic gradients. Amplitude ratios provided an accurate basis for the analytical calculation of water flow velocities, which matched measured flow velocities. Calculated flow velocities were sensitive to thermal properties of saturated sediment and to temperature sensor spacing, but insensitive to thermal dispersivity equal to solute dispersivity. Amplitude ratios of temperature probe setups indirectly installed into piezometer pipes were influenced by thermal exchange processes within the pipes and significantly varied with water flux direction only. Temperature time lags of small sensor distances of all setups were found to be insensitive to vertical water flux. Y1 - 2011 U6 - https://doi.org/10.5194/hess-15-3495-2011 SN - 1027-5606 VL - 15 IS - 11 SP - 3495 EP - 3510 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Fader, Marianelle A1 - Gerten, Dieter A1 - Thammer, M. A1 - Heinke, J. A1 - Lotze-Campen, Hermann A1 - Lucht, Wolfgang A1 - Cramer, Wolfgang T1 - Internal and external green-blue agricultural water footprints of nations, and related water and land savings through trade JF - Hydrology and earth system sciences : HESS N2 - The need to increase food production for a growing world population makes an assessment of global agricultural water productivities and virtual water flows important. Using the hydrology and agro-biosphere model LPJmL, we quantify at 0.5 degrees resolution the amount of blue and green water (irrigation and precipitation water) needed to produce one unit of crop yield, for 11 of the world's major crop types. Based on these, we also quantify the agricultural water footprints (WFP) of all countries, for the period 1998-2002, distinguishing internal and external WFP (virtual water imported from other countries) and their blue and green components, respectively. Moreover, we calculate water savings and losses, and for the first time also land savings and losses, through international trade with these products. The consistent separation of blue and green water flows and footprints shows that green water globally dominates both the internal and external WFP (84% of the global WFP and 94% of the external WFP rely on green water). While no country ranks among the top ten with respect to all water footprints calculated here, Pakistan and Iran demonstrate high absolute and per capita blue WFP, and the US and India demonstrate high absolute green and blue WFPs. The external WFPs are relatively small (6% of the total global blue WFP, 16% of the total global green WFP). Nevertheless, current trade of the products considered here saves significant water volumes and land areas (similar to 263 km(3) and similar to 41 Mha, respectively, equivalent to 5% of the sowing area of the considered crops and 3.5% of the annual precipitation on this area). Relating the proportions of external to internal blue/green WFP to the per capita WFPs allows recognizing that only a few countries consume more water from abroad than from their own territory and have at the same time above-average WFPs. Thus, countries with high per capita water consumption affect mainly the water availability in their own country. Finally, this study finds that flows/savings of both virtual water and virtual land need to be analysed together, since they are intrinsically related. Y1 - 2011 U6 - https://doi.org/10.5194/hess-15-1641-2011 SN - 1027-5606 VL - 15 IS - 5 SP - 1641 EP - 1660 PB - Copernicus CY - Göttingen ER - TY - JOUR A1 - Ballato, Paolo A1 - Uba, Cornelius Eji A1 - Landgraf, Angela A1 - Strecker, Manfred A1 - Sudo, Masafumi A1 - Stockli, Daniel F. A1 - Friedrich, Anke M. A1 - Tabatabaei, Saeid H. T1 - Arabia-Eurasia continental collision insights from late Tertiary foreland-basin evolution in the Alborz Mountains, northern Iran JF - Geological Society of America bulletin N2 - A poorly understood lag time of 15-20 m.y. exists between the initial Arabia-Eurasia continental collision in late Eocene to early Oligocene time and the acceleration of tectonic and sedimentary processes across the collision zone in the early to late Miocene. The late Eocene to Miocene-Pliocene clastic and shallow-marine sedimentary rocks of the Kond, Eyvanekey, and Semnan Basins in the Alborz Mountains (northern Iran) offer the possibility to track the evolution of this orogen in the framework of collision processes. A transition from volcaniclastic submarine deposits to shallow-marine evaporites and terrestrial sediments occurred shortly after 36 Ma in association with reversals in sediment provenance, strata tilting, and erosional unroofing. These events followed the termination of subduction arc magmatism and marked a changeover from an extensional to a contractional regime in response to initiation of continental collision with the subduction of stretched Arabian lithosphere. This early stage of collision produced topographic relief associated with shallow foreland basins, suggesting that shortening and tectonic loading occurred at low rates. Starting from the early Miocene (17.5 Ma), flexural subsidence in response to foreland basin initiation occurred. Fast sediment accumulation rates and erosional unroofing trends point to acceleration of shortening by the early Miocene. We suggest that the lag time between the initiation of continental collision (36 Ma) and the acceleration of regional deformation (20-17.5 Ma) reflects a two-stage collision process, involving the "soft" collision of stretched lithosphere at first and "hard" collision following the arrival of unstretched Arabian continental litho sphere in the subduction zone. Y1 - 2011 U6 - https://doi.org/10.1130/B30091.1 SN - 0016-7606 VL - 123 IS - 1-2 SP - 106 EP - 131 PB - American Institute of Physics CY - Boulder ER - TY - JOUR A1 - Lai, Alvina G. A1 - Denton-Giles, Matthew A1 - Müller-Röber, Bernd A1 - Schippers, Jos H. M. A1 - Dijkwel, Paul P. T1 - Positional information resolves structural variations and uncovers an evolutionarily divergent genetic locus in accessions of arabidopsis thaliana JF - Genome biology and evolution N2 - Genome sequencing of closely related individuals has yielded valuable insights that link genome evolution to phenotypic variations. However, advancement in sequencing technology has also led to an escalation in the number of poor quality-drafted genomes assembled based on reference genomes that can have highly divergent or haplotypic regions. The self-fertilizing nature of Arabidopsis thaliana poses an advantage to sequencing projects because its genome is mostly homozygous. To determine the accuracy of an Arabidopsis drafted genome in less conserved regions, we performed a resequencing experiment on a similar to 371-kb genomic interval in the Landsberg erecta (Ler-0) accession. We identified novel structural variations (SVs) between Ler-0 and the reference accession Col-0 using a long-range polymerase chain reaction approach to generate an Illumina data set that has positional information, that is, a data set with reads that map to a known location. Positional information is important for accurate genome assembly and the resolution of SVs particularly in highly duplicated or repetitive regions. Sixty-one regions with misassembly signatures were identified from the Ler-0 draft, suggesting the presence of novel SVs that are not represented in the draft sequence. Sixty of those were resolved by iterative mapping using our data set. Fifteen large indels (> 100 bp) identified from this study were found to be located either within protein-coding regions or upstream regulatory regions, suggesting the formation of novel alleles or altered regulation of existing genes in Ler-0. We propose future genome-sequencing experiments to follow a clone-based approach that incorporates positional information to ultimately reveal haplotype-specific differences between accessions. KW - haplotype KW - allelic variants KW - drafted genomes KW - genome partitioning KW - comparative genomics Y1 - 2011 U6 - https://doi.org/10.1093/gbe/evr038 SN - 1759-6653 VL - 3 IS - 1-2 SP - 627 EP - 640 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Weidlich, Matthias A1 - Polyvyanyy, Artem A1 - Mendling, Jan A1 - Weske, Mathias T1 - Causal behavioural profiles - efficient computation, applications, and evaluation JF - Fundamenta informaticae N2 - Analysis of behavioural consistency is an important aspect of software engineering. In process and service management, consistency verification of behavioural models has manifold applications. For instance, a business process model used as system specification and a corresponding workflow model used as implementation have to be consistent. Another example would be the analysis to what degree a process log of executed business operations is consistent with the corresponding normative process model. Typically, existing notions of behaviour equivalence, such as bisimulation and trace equivalence, are applied as consistency notions. Still, these notions are exponential in computation and yield a Boolean result. In many cases, however, a quantification of behavioural deviation is needed along with concepts to isolate the source of deviation. In this article, we propose causal behavioural profiles as the basis for a consistency notion. These profiles capture essential behavioural information, such as order, exclusiveness, and causality between pairs of activities of a process model. Consistency based on these profiles is weaker than trace equivalence, but can be computed efficiently for a broad class of models. In this article, we introduce techniques for the computation of causal behavioural profiles using structural decomposition techniques for sound free-choice workflow systems if unstructured net fragments are acyclic or can be traced back to S-or T-nets. We also elaborate on the findings of applying our technique to three industry model collections. KW - Causal Behavioural Profiles KW - Formal Methods KW - Behavioural Abstraction KW - Structural Decomposition KW - Exclusiveness KW - Concurrency KW - Order Relations KW - Causality KW - Optionality Y1 - 2011 U6 - https://doi.org/10.3233/FI-2011-614 SN - 0169-2968 VL - 113 IS - 3-4 SP - 399 EP - 435 PB - IOS Press CY - Amsterdam ER - TY - JOUR A1 - Cilia, Elisa A1 - Landwehr, Niels A1 - Passerini, Andrea T1 - Relational feature mining with hierarchical multitask kFOIL JF - Fundamenta informaticae N2 - We introduce hierarchical kFOIL as a simple extension of the multitask kFOIL learning algorithm. The algorithm first learns a core logic representation common to all tasks, and then refines it by specialization on a per-task basis. The approach can be easily generalized to a deeper hierarchy of tasks. A task clustering algorithm is also proposed in order to automatically generate the task hierarchy. The approach is validated on problems of drug-resistance mutation prediction and protein structural classification. Experimental results show the advantage of the hierarchical version over both single and multi task alternatives and its potential usefulness in providing explanatory features for the domain. Task clustering allows to further improve performance when a deeper hierarchy is considered. Y1 - 2011 U6 - https://doi.org/10.3233/FI-2011-604 SN - 0169-2968 VL - 113 IS - 2 SP - 151 EP - 177 PB - IOS Press CY - Amsterdam ER -