TY - THES A1 - Primus, Philipp-Alexander T1 - High resolution spectroscopy as a tool to unravel structure-reactivity relationships in Eu3+ doped ceria/ceria-zirconia based catalyst nanomaterials Y1 - 2015 ER - TY - THES A1 - Munzke, Dorit T1 - Faseroptische Spektroskopie mit hochfrequent modulierten Diodenlasern zur Analyse kleinster Volumina Y1 - 2015 ER - TY - THES A1 - Feldbusch, Elvira T1 - Geochemische Charakterisierung eines Formationsfluids im Unteren Perm T1 - Geochemical characterization of a formation fluid of Lower Permian reservoir BT - Herkunft, betriebsbedingte Prozesse und Rolle organischer Verbindungen im geothermischen Kreislauf BT - origin, operational processes and role of organic compounds in the geothermal cycle N2 - Diese Arbeit befasst sich mit der ganzheitlichen Betrachtung der Fluideigenschaften eines unterpermischen Reservoirs am Geothermie Forschungsstandort Groß Schönebeck (GrSk) bei Reservoirbedingungen und im Betrieb der Geothermieanlage. Die Untersuchungen zur Fluidherkunft ergeben, dass es sich um ein konnates Wasser meteorischen Ursprungs ohne den Einfluss der darüberliegenden Zechsteinwässer handelt. Die Ionen und Isotopenverhältnisse im Formationswasser gelöster Komponenten in GrSk belegen einen gemeinsamen Genesepfad mit Wässern anderer Rotliegend-Reservoire des Nordostdeutschen Beckens (NEGB). Die Isotopenverhältnisse von ⁸⁷Sr/⁸⁶Sr ≈ 0,7158 und von δ³⁴SV CDT ≈ 4,1 ‰ des Sulfats weisen auf die Anreicherung des Fluids mit schweren Isotopen durch die Fluid Gestein-Wechselwirkung mit Vulkaniten und Rotliegend Sandsteinen des Unteren Perms hin. Das im Formationswasser bei Reservoirbedingungen gelöste Gas (Gas/Wasser ≤ 2 bei STP) enthält Stickstoff (δ¹⁵NAir ≈ 0,6 ‰) und thermogenes Methan (δ¹³CV-PDB ≈ - 18 ‰) aus organischen Karbonablagerungen (Kerogen Typ - III Kohlen) hoher Reife. Die Isotopenverhältnisse der Edelgase belegen eine krustale Herkunft des Gasgemisches. Die berechnete Verweilzeit τ (⁴He) der Gase im Reservoir liegt zwischen 275 und 317 Ma und überschreitet damit bei gegebener Konzentration von Mutternukliden im Reservoirgestein das allgemein angenommene Zeitalter der Sedimentgruppe. Das lässt sich durch eine Zuwanderung von Gasen aus älteren Sedimentfolgen erklären. Die Veränderungen der physikochemischen Fluidparameter während des Anlagenbetriebs sind hauptsächlich temperaturbedingt. Bei stabilen Produktionsbedingungen und einer Temperatur von ca. 100 °C stabilisieren sich auch die Fluideigenschaften. Bei In situ Bedingungen übertage beträgt die Dichte ρ = 1,1325 ± 0,0002 g ∙ mL⁻¹, das Redoxpotential Eh = -105,5 ± 1,3 mV und der pH = 6,61 ± 0,002. Die relative Zusammensetzung der Gasphase bei stabilen Produktionsbedingungen zeigt dagegen eine geringe Erhöhung des Stickstoffanteils sowie des Anteils der Kohlenwasserstoffe (Ethan, Propan, usw.) und Abnahme des relativen Methananteils im Laufe des Betriebs. Die quantitative Untersuchung der sekundären mineralischen Ausfällungen im Fluid mittels sequentieller Extraktion zeigte, dass Schwermetalle als eine Hauptkomponente der Fluidfestphase größtenteils in Verbindung mit organischen Molekülen vorliegen. Experimente zum Einfluss organischer Verbindungen unterschiedlicher Substanzklassen auf eine Mobilisierung der Schwermetalle aus dem Reservoirgestein ergaben, dass die Verbindungen wie Fettsäuren und PAK (polyzyklische aromatische Kohlenwasserstoffe) die Freisetzung von Kupfer, Nickel, Chrom und Blei verhindern bzw. zu derer Immobilisierung beitragen. Im Gegensatz dazu wird die Mobilität von Zink in Anwesenheit von diesen Verbindungen erhöht. Niedermolekulare Monocarbonsäuren und stickstoffhaltige Heteroaromaten tragen, mit Ausnahme von Blei, zur Freisetzung bzw. Mobilisierung von Schwermetallen aus dem Reservoirgestein bei. Die gewonnenen Erkenntnisse dieser Arbeit bestätigen das Risiko massiver Ausfällungen auf der kalten Seite der Geothermieanlage bei Inbetriebnahme des Kraftwerks, wenn keine an den Fluidchemismus angepassten Präventionsmethoden eingesetzt werden. Die Isotopenzusammensetzung der Fluidkomponenten sowie geringfügige Schwankungen der Gaszusammensetzung im kontinuierlichen Anlagenbetrieb lässt eine Kommunikation des unterpermischen Reservoirs mit dem darunter liegenden Oberkarbon vermuten, was eine nachträgliche Veränderung der Fluidzusammensetzung beim Dauerbetrieb der Anlage bedeuten kann. N2 - This work represents a holistic study of the properties of fluid from the Lower Permian reservoirs of the geothermal research site Gross Schönebeck at reservoir and at wellhead conditions during fluid circulation. Investigations of the fluid origin show that the formation water represents a connate water of meteoric origin without any evidence of influences from overlying Zechstein. The tracers of formation water as well as the isotopic signatures of relevant components reveal a common genesis path with waters of other Rotliegend reservoirs of the Northeast German Basin (NEGB). The isotope ratios of ⁸⁷Sr/⁸⁶Sr ≈ 0,7158 and sulphate δ³⁴SV-CDT ≈ 4,1 ‰ indicate strong water rock interaction with Lower Permian Rotliegend sandstones and volcanic rocks, resulting in an enrichment with 87Sr and 34S. The fluid dissolves about gas/water ≤ 2 (at STP) of formation gas at reservoir conditions. Major components are nitrogen (δ¹⁵NAir ≈ 0,6 ‰) and methane (δ¹³CV PDB ≈ - 18 ‰) of thermogenic origin from carboniferous organic matter with kerogen Type III coals of high maturity. The noble gases represent a gas mixture of crustal origin with a residence time τ (⁴He) in the reservoir of 275 - 317 Ma. This value exceeds commonly accepted age and parent radionuclide content of the stratigraphic group. This indicates migration of gases from older sediment layers. The changes of physico-chemical fluid properties above ground during plant operation are primarily temperature-affected. At steady operating conditions with a stable temperature of ~ 100 °C fluid properties stabilise with an in-situ density ρ = 1,1325 ± 0,0002 g ∙ mL⁻¹, redox potential Eh = -105,5 ± 1,3 mV and pH = 6,61 ± 0,002. The composition of formation gas at steady operating conditions shows a slight increase of nitrogen content and lower concentrated hydrocarbons (ethane, propane, etc.). Methane content decreases during fluid production, which could be an indicator for gas migration from different reservoir sections. A quantitative examination of secondary mineral precipitations in the fluid by means of sequential extractions indicates that heavy metals are largely bonded on the organic matter. Experiments on the impact different classes of organic components on the mobilisation of heavy metals from the reservoir rock demonstrated that the most heavy metals (Cu, Pb, Cr and Ni) can hardly be mobilized by fatty acids and polycyclic aromatic hydrocarbons or can be precipitated from the fluid. Zinc showed the opposite behaviour with these organic compounds. Organic components such as monocarboxylic acids and nitrogen heterocycles contribute to removing of heavy metals from the reservoir rock, with exception of lead. The findings of this work confirm the risk of considerable precipitation on the cold side of the geothermal plant during commissioning of the power station unless prevention methods adapted for the fluid chemistry are applied. The isotopic composition of fluid components as well as a minor fluctuation of gas composition during continuous plant operation indicates a potential communication of the Lower Permian reservoir with the underlying Upper Carboniferous formation. This may lead to a subsequent change of the fluid composition during a long-term operation of the plant in GrSk. KW - Groß Schönebeck KW - Rotliegend KW - Formationsfluid KW - Schwermetalle KW - Herkunft KW - geothermal KW - origin KW - formation fluid KW - heavy metals KW - onsite monitoring Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-87402 ER - TY - THES A1 - Jehannin, Marie T1 - About the role of physico-chemical properties and hydrodynamics on the progress of a precipitation reaction T1 - Über die Rolle physikalisch-chemischer Eigenschaften und Hydrodynamiken auf den Fortschritt einer Fällungsreaktion BT - the case of cerium oxalate particles produced during coalescence of drops BT - Ceroxalat-Partikel, entstanden während der Koaleszenz von Tropfen N2 - The size and morphology control of precipitated solid particles is a major economic issue for numerous industries. For instance, it is interesting for the nuclear industry, concerning the recovery of radioactive species from used nuclear fuel. The precipitates features, which are a key parameter from the post-precipitate processing, depend on the process local mixing conditions. So far, the relationship between precipitation features and hydrodynamic conditions have not been investigated. In this study, a new experimental configuration consisting of coalescing drops is set to investigate the link between reactive crystallization and hydrodynamics. Two configurations of aqueous drops are examined. The first one corresponds to high contact angle drops (>90°) in oil, as a model system for flowing drops, the second one correspond to sessile drops in air with low contact angle (<25°). In both cases, one reactive is dissolved in each drop, namely oxalic acid and cerium nitrate. When both drops get into contact, they may coalesce; the dissolved species mix and react to produce insoluble cerium oxalate. The precipitates features and effect on hydrodynamics are investigated depending on the solvent. In the case of sessile drops in air, the surface tension difference between the drops generates a gradient which induces a Marangoni flow from the low surface tension drop over the high surface tension drop. By setting the surface tension difference between the two drops and thus the Marangoni flow, the hydrodynamics conditions during the drop coalescence could be modified. Diols/water mixtures are used as solvent, in order to fix the surface tension difference between the liquids of both drops regardless from the reactant concentration. More precisely, the used diols, 1,2-propanediol and 1,3-propanediol, are isomer with identical density and close viscosity. By keeping the water volume fraction constant and playing with the 1,2-propanediol and 1,3-propanediol volume fractions of the solvents, the mixtures surface tensions differ up to 10 mN/m for identical/constant reactant concentration, density and viscosity. 3 precipitation behaviors were identified for the coalescence of water/diols/recatants drops depending on the oxalic excess. The corresponding precipitates patterns are visualized by optical microscopy and the precipitates are characterized by confocal microscopy SEM, XRD and SAXS measurements. In the intermediate oxalic excess regime, formation of periodic patterns can be observed. These patterns consist in alternating cerium oxalate precipitates with distinct morphologies, namely needles and “microflowers”. Such periodic fringes can be explained by a feedback mechanism between convection, reaction and the diffusion. N2 - Die Kontrolle der Morphologie und Größe fester durch Fällung erzeugter Partikel ist eine wichtige Herausforderung in Industrie und Forschung. Insbesondere gilt dies für die Wiederaufbereitung verbrauchter Brennstäber in der Atomindustrie. Die Eigenschaften der Ausfällungen hängen von den Mischbedingungen der Flüssigkeiten in den Prozessen ab. Dennoch sind die Beziehungen zwischen den physischen Charakteristiken der erzeugten Partikeln und den hydrodynamischen Bedingungen ungewiss. In dieser Arbeit werden Zwei-Tropfen-Koalezenz-Experiment genutzt, um die Verbindungen zwischen Hydrodynamik und Fällungsreaktion besser zu verstehen. Zwei Konfigurationen von ruhenden wässrigen Tropfen wurden untersucht: Zum einen Tropfen mit hohem Kontaktwinkel (> 90°) in Öl und zum anderen Tropfen mit kleinem Kontaktwinkel (< 25°) in Luft. In beiden Fällen wurde Oxalsäure und Ceriumnitrat jeweils in einem Tropfen gelöst. Wenn beide Tropfen einander in Kontakt treten, können sie sich vereinigen. Dabei mischen sich die Reagenzien und erzeugen Ceriumoxalat. In Abhängigkeit von Lösungsmitteln werden die Eigenschaften der Fällung sowie ihr Einfluss auf die Hydrodynamik untersucht. In Experimenten Tropfen in Luft ist es außerdem möglich, mittels Wasser/Diol-Mischungen den Oberflächenspannungsgradienten zwischen beiden Tropfenflüssigkeiten zu ändern. Damit ist es möglich den resultierenden Marangoni-Fluss zu kontrollieren. So werden die hydrodynamischen Bedingungen unabhängig von dem Oxalsäureüberschuss verwirklicht. In diesem Fall werden drei Fällungsverhalten abhängig er Oxalsäure-Konzentration beobachtet. Das Zwischenverhalten zeigt überraschende periodische Strukturen, welche verschiedenen Morphologien bilden, nämlich Nägeln und „Microflower“. Die Strukturen wurden über Optische Mikroskopie Identifiziert und charakterisiert mit Hilfe von Konfokaler Mikroskopie, SEM, XRD und SAXS. Die Entstehung solcher Strukturen könnte durch eine Konvektion- Diffusion- Reaktion-Rückkopplung erklärt werden. N2 - Réussir à contrôler la morphologie et la taille de particules solides obtenues par précipitation est un enjeu industriel majeur. C’est notamment le cas dans l’industrie nucléaire pour le recyclage du combustible usé. Les caractéristiques des précipités sont liées aux conditions de mélange des phases liquides dans les procédés. Les corrélations entre les paramètres physiques des particules obtenues et les conditions hydrodynamiques n’ont pas été examinées jusqu’à présent. Dans cette étude, des systèmes expérimentaux originaux, basés sur la coalescence de deux gouttes, sont utilisés afin de mieux comprendre les liens entre hydrodynamique et réaction de précipitation. Deux configurations de gouttes aqueuses ont été investiguées, la première consiste en deux goutes posées à fort angle de contact (>90°) dans l’huile, il s’agit d’un système modèle pour les gouttes en émulsion, la second configuration correspond à deux gouttes posées à faible angle de contact (>25°) dans l’air. Dans chaque cas, une espèce réactive est dissoute dans chaque goutte, à savoir de l’acide oxalique ou du nitrate de cérium dans la seconde. Lorsque les deux gouttes se touchent, elles peuvent éventuellement coalescer, alors les espèces chimiques se mélangent et réagissent pour produire un précipité d’oxalate de cérium. Les caractéristiques de ce précipité et ses effets sur l’hydrodynamique sont examinés en fonction du solvant utilisé. De plus, dans le cas des gouttes posées sur une surface de silice dans l’air, une différence de tension de surface entre deux gouttes crée un gradient qui génère un flux de Marangoni dirigé de la goutte de faible tension de surface au-dessus de la goutte de forte tension de surface. En jouant sur la différence de tension de surface entre les deux gouttes, et ainsi sur le flux de Marangoni, il est possible de modifier les conditions hydrodynamiques lors de la coalescence des gouttes. Des mélanges eau/diols ont été utilisés comme solvant afin de pouvoir modifier la différence de tension de surface entre les liquides des deux gouttes indépendamment de leur concentration en réactif. Les diols utilisés, le 1,2-propanediol et le 1,3-propanediol sont des isomères, ils sont la même densité, des viscosités semblables mais des tensions de surface différentes. En fixant la fraction volumique d’eau dans le solvant, et en jouant sur les fractions volumiques de chaque diols, il est possible de contrôler la tension de surface des mélanges sur une gamme de 10 mN/m pour une concentration en réactifs donnée, et en conservant la densité et viscosité des solvants. Trois régimes de précipitation ont été identifiés dans le cas de la coalescence de gouttes d’eau/diols/réactifs en fonction de l’excès oxalique. Les motifs de précipitation en découlant ont été imagés par microscopie optique et les différents précipités ont été caractérisés à l’aide de microscopie confocale, MEB, DRX et SAXS. Le régime intermédiaire présente des motifs périodiques surprenants. Ces motifs correspondent à des domaines nettement délimités d’oxalate de cérium de différentes morphologies, à savoir des aiguilles et des « microflowers ». L’obtention de tels motifs peut s’expliquer par un mécanisme de rétroaction entre convection, réaction et diffusion. KW - Marangoni flow KW - coalescence KW - periodic pattern KW - oxalic precipitation KW - drop KW - Marangoni-Fluss KW - Koaleszenz KW - Tropfen KW - Fällungsreaktion KW - periodisches Muster KW - Oxalat-Fällung KW - flux de Marangoni KW - coalescence KW - gouttes KW - précipitation KW - motif périodique KW - précipitation oxalique Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-88364 ER - TY - THES A1 - Enzenberg, Anne T1 - Neue fluoreszierende Copolymere für sensitive Detektionssysteme in Wasser T1 - New fluorescent copolymers for sensitive detection systems in water N2 - Ziel dieser Arbeit war die Synthese und Charakterisierung von neuartigen fluoreszierenden Copolymeren zur Analytdetektion in wässrigen Systemen. Das Detektionssystem sollte ein einfaches Schalten der Fluoreszenz bei Analytbindung „Aus“ bzw. Verdrängung „An“ ermöglichen. Dafür wurde die Synthese eines funktionalisierten Monomers so geplant, dass sich Fluorophor und Analyt innerhalb derselben Monomereinheit in direkter Nachbarschaft zueinander befinden. So sollten bei Erkennung des Analyten durch eine mit einem Fluoreszenzlöscher funktionalisierte Erkennungsstruktur Fluorophor und Löscher in einen vorgegebenen Abstand zueinander gezwungen und die Fluoreszenz des Fluorophors effizient gelöscht werden. Bei anschließender Verdrängung der Erkennungseinheit durch einen stärker bindenden Analyten sollte die Fluoreszenz wieder „angeschaltet“ werden. Eine weitere Zielstellung für das Detektionssystem war eine hohe Löslichkeit und Fluoreszenzintensität in Wasser. Da die Anwendung solcher Sensoren besonders in der Medizin und Biologie, z.B. für Schnellerkennungstest von Pathogenen, von Interesse ist, ist die Kompatibilität mit wässrigen Medien essentiell. Die funktionalisierten Monomere wurden frei radikalisch mit N Vinyl-pyrrolidon bzw. N Vinyl¬caprolactam zu wasserlöslichen, fluoreszierenden Copolymeren umgesetzt. In den N-Vinyl¬pyrrolidon-Polymeren (PNVP) wurde RhodaminB, in den thermoresponsiven N Vinyl¬caprolactam-Polymeren (PNVCL) ein Naphthalsäureimid als Fluorophor verwendet. Während Rhodamine eine hohe Fluoreszenzintensität, gute Quantenausbeuten und hohen Extinktionskoeffizienten in Wasser zeigen, sind Naphthalsäure¬imide umgebungssensitive Chromophore, die bei Änderung ihrer Lösungsmittelumgebung, wie z.B. beim Kollaps eines thermoresponsiven Polymers in Wasser, ihre Fluoreszenzintensität und Quantenausbeute drastisch ändern können. Der Vorteil der hier verwendeten Strategie der Monomersynthese liegt darin, dass bei jeder spezifischen Analytdetektion durch eine Erkennungseinheit die Fluoreszenz effizient gelöscht bzw. bei Verdrängung durch einen stärker bindenden Analyten wieder „angeschaltet“ wird. Dieses Prinzip wird bereits vielfach in der Biologie in sogenannten „Molecular Beacons“ ausgenutzt, wobei ein Fluorophor und ein Löscher durch spezifische DNA Basenpaarung in einen vorgegebenen Abstand zueinander gezwungen werden und so ein „Schalten“ der Fluoreszenz ermöglichen. Aufgrund der vorgegebenen Struktur der DNA Basensequenzen ist es jedoch nicht direkt auf andere Erkennungsreaktionen übertragbar. Daher wurde ein Modellsystem entwickelt, welches die Möglichkeit bietet Analyt, Erkennungseinheit und Signalgeber variabel, je nach Anforderungen des Systems, auszutauschen. So soll es möglich sein, den Sensor a priori für jede Erkennungs¬reaktion zu verwenden. Als Modell Bindungs¬paare wurden ß Cyclodextrin/Adamantan und Con¬cana¬valinA/Mannose ausgewählt. Adamantan bzw. Mannose wurde als Analyt zusammen mit dem Fluorophor in das Polymer eingebunden. ß Cyclo¬dextrin (ß CD) bzw. ConcanavalinA (ConA) wurde als Erkennungsstruktur an einem Fluoreszenzlöscher immobilisiert. Polymer-basierte Fluoreszenzsensoren sind in der Fachliteratur gut dokumentiert. In der Regel sind Signalgeber und Analyt jedoch statistisch im Polymer verteilt, da sie sich entweder in unterschiedlichen Monomereinheiten befinden oder die Funktionalisierung durch eine polymeranaloge Umsetzung erfolgt. Der gewählte Ansatz Fluorophor und Analyt innerhalb derselben Monomereinheit einzubinden, soll bei jeder Erkennungsreaktion des Analyten zu einer Änderung der Signalintensität des Fluorophors führen. Eine hohe Signalintensität bei Analytdetektion ist wünschenswert, insbesondere für Erkennungsreaktionen, die mit möglichst geringem apparativem Aufwand, am besten mit dem bloßen Auge zu verfolgen sein sollen. Des Weiteren ist es möglich den Fluorophorgehalt im Polymer genau einzustellen und so Selbstlöschung zu vermeiden. Die synthetisierten Polymere haben einen Fluorophorgehalt von 0,01 mol% bis 0,5 mol%. Für die RhodaminB haltigen Polymere zeigte sich, dass ein Fluorophorgehalt unterhalb 0,1 mol% im Polymer die höchsten Ausbeuten, Molmassen und Quantenausbeuten liefert. Für die Naphthalsäureimid haltigen Polymere hingegen wurden auch für einen Fluorophorgehalt von bis zu 1 mol% hohe Ausbeuten und Molmassen erreicht. Die Naphthalsäureimid haltigen Polymere haben jedoch in wässriger Lösungsmittelumgebung nur geringe Quantenausbeuten. Als Fluoreszenzlöscher wurden Goldnanopartikel synthetisiert, die mit den entsprechenden Erkennungsstrukturen (ß-CD oder ConA) für den verwendeten Analyten funktionalisiert wurden. Goldnanopartikel als Löscher bieten den Vorteil, dass ihre Dispergierbarkeit in einem Lösemittel durch Funktionalisierung ihrer Hülle gezielt gesteuert werden kann. Durch die hohe Affinität von Goldnanopartikeln zu Thiolen und Aminen konnten sie mit Hilfe einfacher Syntheseschritte mit Thio ß CD Derivaten bzw. ConA funktionalisiert werden. In der hier vorgelegten Arbeit sollte ein Modellsystem für einen solches fluoreszenz-basiertes Detektionssystem in Wasser entwickelt werden. Nachfolgend werden die zu erfüllenden strukturellen Voraussetzungen für die Synthese eines solchen Sensors nochmals zusammengefasst: 1. Verwendung eines Fluorophors, der eine hohe Signalintensität zeigt. 2. Analyt bzw. Erkennungseinheit soll sich im Abstand von wenigen Nanometern zum Signalgeber befinden, um bei jeder Detektionsreaktion die Signalintensität des Signalgebers beeinflussen zu können. 3. Die Detektionseinheit benötigt eine funktionelle Gruppe zur Immobilisierung. Immobilisierung kann z.B. durch Einbindung in ein Polymer erfolgen. 4. Der Fluorophor soll bei Änderung seiner lokalen Umgebung, durch Binden eines Löschers oder Änderung seiner Lösemittelumgebung seine Fluoreszenzeigenschaften drastisch ändern. 5. Die Reaktion sollte schnell und mit möglichst geringem apparativem Aufwand, am besten mit bloßem Auge zu verfolgen sein. Für das ß-CD/Adamantan Modellsystem wurde ein Fluoreszenz Aus/An Sensor entwickelt, der bei Binden ß CD funktionalisierter Goldnanopartikel an das polymergebundene Adamantan die Fluoreszenz des RhodaminB Fluorophors effizient löscht und bei Verdrängung der Goldnanopartikel wieder zurück gewinnt. Dies konnte auch mit bloßem Auge verfolgt werden. Für die Naphthalsäureimid Monomere, die mit NVCL copolymerisiert wurden, wurde abhängig von der lokalen Umgebung des Fluorophors eine unterschiedliche Verstärkung der Fluoreszenzintensität bei Überschreiten des Trübungspunktes des Polymers gefunden. Dabei zeigte sich, dass die Einführung eines Abstandshalters zwischen Polymerrückgrat und Fluorophor zu einer großen Fluoreszenz¬verstärkung führt, während sich ohne Abstandshalter die Fluoreszenzintensität bei Über¬schreiten des Trübungspunktes kaum ändert. N2 - Novel fluorescent copolymers for analyte detection in aqueous media have been synthesized and characterized. The detection system is designed to switch fluorescence between an “Off” state for analyte binding and an “On” state for analyte displacement. A functional monomer was synthesized in which fluorophore and analyte are placed close to each other within the same monomer unit. If the fluorescence quencher labeled recognition unit detects an analyte, fluorophore and quencher are forced in a very short distance to each other and fluorescence is quenched efficiently. The recognition unit is afterwards replaced through a stronger binding analyte and fluorescence should be “turned on” again. Another requirement for the detection system was high solubility and fluorescence intensity in water. Water compatibility is essential for implementation of such sensor systems especially in medicine and biology, e.g. for fast testing systems of pathogens. The synthesized monomers have been copolymerized in a free radical polymerization with N vinyl¬pyrrolidone or N vinylcaprolactame to give fluorescent, water soluble copolymers. For the N vinyl-pyrrolidone polymers (PNVP) a rhodamineB fluorophore was used whereas for the thermoresponsive N vinyl-caprolactame polymers (PNVCL) a naphthalimide fluorophore was used in the comonomer. While rhodamines are well known for their high fluorescence intensity, quantum yield and extinction coefficient in water, naphthalimides are known to be environment sensitive fluorophores who can change their fluorescence intensity drastically depending on their local solvent vicinity. Such a functional monomer design should give the advantage of efficient fluorescence quenching during analyte binding and fluorescence enhancement when the recognition unit is afterwards displaced. This principle is often used in systems like molecular beacons. Fluorophore and quencher are forced in a given distance through specific DNA base pairing and fluorescence can be switched. Because of the given DNA base sequence this detection system cannot be directly implemented to other recognition reactions. Here a model system was developed which gives the possibility to vary analyte, recognition unit and fluorophore. This way it should be possible to adopt the sensor a priori to every recognition reaction. ß-cyclodextrin/adamantane and concana¬valinA/mannose were chosen as model binding pairs. Adamantane or mannose and the fluorophore are attached to the polymer backbone. The ß cyclodextrin (ß-CD) or concanavalinA (ConA) recognition unit is immobilized on a fluorescence quencher. Polymer based fluorescence sensors are well known in literature. Usually fluorophore and analyte are statistically spread in the polymer because they are independently incorporated via different monomer units or functionalization is done polymer analog. To place fluorophore and analyte in the same monomer unit should have the benefit that every recognition event also leads to a change of signal intensity of the fluorophore. High signal intensity is crucial especially for recog¬nition reactions which should be tracked with only simple equipment or even with the naked eye. Even more it is possible to adjust the fluorophore content in the polymer. The synthesized polymers have a fluorophore content between 0.01 mol% and 0.5 mol%. For the rhodamineB containing polymers a fluorophore content below 0.1 mol% gives the highest yields, molecular weight and quantum yields. The polymers which contain naphthalimide as fluorophore give high yields and molecular weight up to 1 mol% of fluorophore content in the polymer but the quantum yields are in general low in aqueous media. Gold nano¬particles (Au NP) are synthesized as fluorescence quencher and functionalized with the recognition units (ß-CD or ConA) for analyte detection. Gold nanoparticles as fluorescence quencher have the advantage that their dispersibility in a solvent can be controlled by the choice of ligand used for the stabilization of the particles. Because of their high affinity to thiols and amines it was possible to synthesize thio-ß-CD and ConA functionalized gold nanoparticles in only a few synthetic steps.   Here a model system for fluorescent detection in water is presented. The structural requirements that have to be fulfilled for the synthesis of such a detection system are summarized: 1. The fluorophore needs to have high signal intensity. 2. Analyte or recognition unit have to be only a few nanometer apart from the signaling unit so every recognition reaction leads to a change of signal intensity. 3. The detection unit needs a functional group for immobilization. Immobilization can be done for example in a polymer matrix. 4. The fluorophore should change its fluorescence properties drastically through change of its local environment for example when binding a fluorescence quencher. 5. Reaction should be fast and detection should be possible with only little equipment or even with the naked eye It was possible to synthesis a fluorescence Off/On sensor for a ß-CD/adamantane model system. Fluorescence of the rhodamineB fluorophore is quenched during binding of ß-CD-Au-NPs and efficiently enhanced when the ß-CD-Au-NPs are displaced through a better binding analyte which can be even followed by the naked eye (Scheme 1). For the naphthalimide containing thermoresponsive N-vinylcaprolactame polymers a dependence of the fluorescence enhancement at polymer collapse is found depending on the local vicinity of the fluorophore. Introducing a spacer between fluorophore and polymer backbone leads to a high fluorescence enhancement while polymers without a spacer show almost no fluorescence enhancement during the collapse. KW - Fluoreszenzsensor KW - fluorescence sensor KW - thermoresponsiv KW - thermoresponsive KW - ß-Cyclodextrin KW - ß-cyclodextrine KW - Rhodamin B KW - rhodamine b KW - Naphthalimid KW - naphthalimide KW - Solvatochromie KW - solvatochrome KW - N-Vinylpyrrolidon KW - N-vinylpyrrolidone KW - N-Vinylcaprolactam KW - N-vinylcaprolactame Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82325 ER - TY - THES A1 - Jahn, Karolina T1 - Multiparameter-Detektion von biologisch relevanten Analyten mittels moderner Verfahren der Fluoreszenzmikroskopie Y1 - 2015 ER - TY - THES A1 - Soulié, Virginie T1 - Sessile droplets of salt solutions on inert and metallic surfaces T1 - Gouttes sessiles de solutions salines sur des surfaces inertes et métalliques BT - influence of salt concentration gradients on evaporation and corrosion behaviour BT - influence des gradients de concentration en sel sur la dynamique d’Evaporation et le processus de corrosion N2 - In this thesis we investigate the evaporation behaviour of sessile droplets of aqueous saline solutions on planar inert and metallic surfaces and characterise the corrosion phenomenon for iron surfaces. First we study the evaporation behaviour of sessile salty droplets on inert surfaces for a wide range of salt concentrations, relative humidities, droplet sizes and contact angles. Our study reveals the range of validity of the well-accepted diffusion-controlled evaporation model and highlights the impact of salt concentration (surface tension) gradients driven Marangoni flows on the evaporation behaviour and the subsequent salty deposit patterns. Furthermore we study the spatial-temporal evolution of sessile droplets from saline solutions on metallic surfaces. In contrast to the simple, generally accepted Evans droplet model, we show that the corrosion spreads ahead of the macroscopic contact line with a peripheral film. The three-phase contact line is destabilized by surface tension gradients induced by ionic composition changes during the course of the corrosion process and migration of cations towards the droplet perimeter. Finally we investigate the corrosion behaviour under drying salty sessile droplets on metallic surfaces. The corrosion process, in particular the location of anodic and cathodic activities over the footprint droplet area is correlated to the spatial distribution of the salt inside the drying droplet. N2 - Dans cette thèse, la dynamique d’évaporation de gouttes sessiles de solutions salines sur des surfaces planes inertes et métalliques a été étudiée et le phénomène de corrosion pour les surfaces ferriques caractérisé. En premier lieu, nous nous sommes intéressés à la dynamique d’évaporation de gouttes sessiles salées sur des surfaces inertes pour une large gamme de concentrations en sel, d’humidité relatives, de tailles de goutte et d’angles de contact. Notre étude révèle les domaines de validité du modèle classique d’évaporation, processus contrôlé par la diffusion de la vapeur dans l’air et met en évidence l’impact de flux (de Marangoni) induits par des gradients de concentration (tension de surface) en sel sur la dynamique d’évaporation et les dépôts salins obtenus après évaporation de la goutte. De plus, nous nous sommes consacrés à l’évolution spatio-temporelle de gouttes sessiles de solutions salines sur des surfaces métalliques. Contrairement au modèle simplifié de la goutte d’Evans, nous avons montré que le processus de corrosion s’étend aux abords de la ligne de contact, avec la formation d’un film périphérique. La ligne triple est déstabilisée par des gradients de tension de surface induits par des variations de composition ionique au cours du processus de corrosion et la migration des cations vers la périphérie de la goutte. Enfin nous avons étudié le phénomène de corrosion du métal induit par l’évaporation de gouttes sessiles salées. Le processus de corrosion, en particulier la localisation des réactions anodiques et cathodiques sur la surface métallique en contact avec la goutte est corrélée à la distribution spatiale du sel au sein de la goutte s’évaporant. KW - sessile droplet KW - salt KW - evaporation KW - corrosion KW - liegende Tropfen KW - Salz KW - Verdunstung KW - Korrosion KW - gouttes sessiles KW - sel KW - evaporation KW - corrosion Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90329 ER - TY - THES A1 - Chen, Zupeng T1 - Novel strategies to improve (photo)catalytic performance of carbon nitride-based composites Y1 - 2015 ER - TY - THES A1 - Schwarz, Dana T1 - Nanoporous melamine resin materials BT - synthetic strategies, shape control and adsorption proberties Y1 - 2015 ER - TY - THES A1 - Taßler, Stephanie T1 - Physical-Chemical Investigation of newly-synthesised Lysine-Based Amino-Functionalised Lipids for gene transfection in 2D and 3D model systems Y1 - 2015 ER -