TY - GEN A1 - Löhmannsröben, Hans-Gerd A1 - Beck, Michael A1 - Hildebrandt, Niko A1 - Schmälzlin, Elmar A1 - van Dongen, Joost T. T1 - New challenges in biophotonics : laser-based fluoroimmuno analysis and in-vivo optical oxygen monitoring N2 - Two examples of our biophotonic research utilizing nanoparticles are presented, namely laser-based fluoroimmuno analysis and in-vivo optical oxygen monitoring. Results of the work include significantly enhanced sensitivity of a homogeneous fluorescence immunoassay and markedly improved spatial resolution of oxygen gradients in root nodules of a legume species. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 018 KW - Sauerstoff KW - Quantenpunkt KW - Lumineszenz KW - Immunoassay KW - Energietransfer KW - Fluoreszenz-Resonanz-Energie-Transfer KW - Nanopartikel KW - Lanthanoide KW - Optode KW - Förster Resonanz Energie Transfer KW - Biophotonik KW - biophotonics KW - nanoparticles KW - immunoassay KW - oxygen KW - optode Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10120 ER - TY - GEN A1 - Niederkrüger, Matthias A1 - Salb, Christian A1 - Beck, Michael A1 - Hildebrandt, Niko A1 - Löhmannsröben, Hans-Gerd A1 - Marowsky, Gerd T1 - Improvement of a fluorescence immunoassay with a compact diode-pumped solid state laser at 315 nm N2 - We demonstrate the improvement of fluorescence immunoassay (FIA) diagnostics in deploying a newly developed compact diode-pumped solid state (DPSS) laser with emission at 315 nm. The laser is based on the quasi-three-level transition in Nd:YAG at 946 nm. The pulsed operation is either realized by an active Q-switch using an electro-optical device or by introduction of a Cr4+:YAG saturable absorber as passive Q-switch element. By extra-cavity second harmonic generation in different nonlinear crystal media we obtained blue light at 473 nm. Subsequent mixing of the fundamental and the second harmonic in a β-barium-borate crystal provided pulsed emission at 315 nm with up to 20 μJ maximum pulse energy and 17 ns pulse duration. Substitution of a nitrogen laser in a FIA diagnostics system by the DPSS laser succeeded in considerable improvement of the detection limit. Despite significantly lower pulse energies (7 μJ DPSS laser versus 150 μJ nitrogen laser), in preliminary investigations the limit of detection was reduced by a factor of three for a typical FIA. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 016 KW - Immunoassay KW - Fluoreszenz-Resonanz-Energie-Transfer KW - Neodym-YAG-Laser KW - 946 nm KW - 473 nm KW - 315 nm KW - gepulster DPSS Laser KW - sättigbarer Absorber KW - fluorescence immunoassay KW - 946 nm KW - 473 nm KW - 315 nm KW - pulsed DPSS laser Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10150 ER - TY - GEN A1 - Beck, Michael A1 - Hildebrandt, Niko A1 - Löhmannsröben, Hans-Gerd T1 - Quantum dots as acceptors in FRET-assays containing serum N2 - Quantum dots (QDs) are common as luminescing markers for imaging in biological applications because their optical properties seem to be inert against their surrounding solvent. This, together with broad and strong absorption bands and intense, sharp tuneable luminescence bands, makes them interesting candidates for methods utilizing Förster Resonance Energy Transfer (FRET), e. g. for sensitive homogeneous fluoroimmunoassays (FIA). In this work we demonstrate energy transfer from Eu3+-trisbipyridin (Eu-TBP) donors to CdSe-ZnS-QD acceptors in solutions with and without serum. The QDs are commercially available CdSe-ZnS core-shell particles emitting at 655 nm (QD655). The FRET system was achieved by the binding of the streptavidin conjugated donors with the biotin conjugated acceptors. After excitation of Eu-TBP and as result of the energy transfer, the luminescence of the QD655 acceptors also showed lengthened decay times like the donors. The energy transfer efficiency, as calculated from the decay times of the bound and the unbound components, amounted to 37%. The Förster-radius, estimated from the absorption and emission bands, was ca. 77 Å. The effective binding ratio, which not only depends on the ratio of binding pairs but also on unspecific binding, was obtained from the donor emission dependent on the concentration. As serum promotes unspecific binding, the overall FRET efficiency of the assay was reduced. We conclude that QDs are good substitutes for acceptors in FRET if combined with slow decay donors like Europium. The investigation of the influence of the serum provides guidance towards improving binding properties of QD assays. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 019 KW - Quantenpunkt KW - Lumineszenz KW - Serum KW - Europium KW - Immunoassay KW - Energietransfer KW - Fluoreszenz-Resonanz-Energie-Transfer KW - Förster-Resonanz-Energie-Transfer KW - Quantum Dot KW - Luminescence KW - Serum KW - Europium KW - Immunoassay KW - Energy Transfer KW - FRET Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-9504 ER - TY - JOUR A1 - Ettlinger, Julia A1 - Schenk, Jörg A. A1 - Micheel, Burkhard A1 - Ehrentreich-Förster, Eva A1 - Gajovic-Eichelmann, Nenad T1 - A direct competitive homogeneous immunoassay for progesterone - the Redox Quenching Immunoassay JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis N2 - A direct competitive amperometric immunoassay format for the detection of haptens and proteins was developed. The method is based on the quenching of electroactivity of ferrocenium, which is coupled to the antigen and used as the primary reporter, upon binding to a monoclonal anti-ferrocenium antibody, which is coupled to the detection antibody and used as a secondary reporter. A separation-free progesterone immunoassay with a lower detection limit of 1 ng?mL-1 (3.18 nmol?L-1) in 1?:?2 diluted blood serum was realised by combining two bifunctional conjugates, a ferrocenium-PEG-progesterone tracer and a bioconjugate of one anti-progesterone and one anti-ferrocenium antibody. The immune complex is formed within 30 s upon addition of progesterone, resulting in a total analysis time of 1.5 min. KW - Immunoassay KW - Amperometry KW - Ferrocene KW - Progesterone Y1 - 2012 U6 - https://doi.org/10.1002/elan.201200107 SN - 1040-0397 VL - 24 IS - 7 SP - 1567 EP - 1575 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Riedel, Soraya Lisanne T1 - Development of electrochemical antibody-based and enzymatic assays for mycotoxin analysis in food T1 - Entwicklung elektrochemischer Antikörper- und Enzym-basierter Assays für die Analyse von Mykotoxinen in Lebensmitteln N2 - Electrochemical methods are promising to meet the demand for easy-to-use devices monitoring key parameters in the food industry. Many companies run own lab procedures for mycotoxin analysis, but it is a major goal to simplify the analysis. The enzyme-linked immunosorbent assay using horseradish peroxidase as enzymatic label, together with 3,3',5,5' tetramethylbenzidine (TMB)/H2O2 as substrates allows sensitive mycotoxin detection with optical detection methods. For the miniaturization of the detection step, an electrochemical system for mycotoxin analysis was developed. To this end, the electrochemical detection of TMB was studied by cyclic voltammetry on different screen-printed electrodes (carbon and gold) and at different pH values (pH 1 and pH 4). A stable electrode reaction, which is the basis for the further construction of the electrochemical detection system, could be achieved at pH 1 on gold electrodes. An amperometric detection method for oxidized TMB, using a custom-made flow cell for screen-printed electrodes, was established and applied for a competitive magnetic bead-based immunoassay for the mycotoxin ochratoxin A. A limit of detection of 150 pM (60 ng/L) could be obtained and the results were verified with optical detection. The applicability of the magnetic bead-based immunoassay was tested in spiked beer using a handheld potentiostat connected via Bluetooth to a smartphone for amperometric detection allowing to quantify ochratoxin A down to 1.2 nM (0.5 µg/L). Based on the developed electrochemical detection system for TMB, the applicability of the approach was demonstrated with a magnetic bead-based immunoassay for the ergot alkaloid, ergometrine. Under optimized assay conditions a limit of detection of 3 nM (1 µg/L) was achieved and in spiked rye flour samples ergometrine levels in a range from 25 to 250 µg/kg could be quantified. All results were verified with optical detection. The developed electrochemical detection method for TMB gives great promise for the detection of TMB in many other HRP-based assays. A new sensing approach, based on an enzymatic electrochemical detection system for the mycotoxin fumonisin B1 was established using an Aspergillus niger fumonisin amine oxidase (AnFAO). AnFAO was produced recombinantly in E. coli as maltose-binding protein fusion protein and catalyzes the oxidative deamination of fumonisins, producing hydrogen peroxide. It was found that AnFAO has a high storage and temperature stability. The enzyme was coupled covalently to magnetic particles, and the enzymatically produced H2O2 in the reaction with fumonisin B1 was detected amperometrically in a flow injection system using Prussian blue/carbon electrodes and the custom-made wall-jet flow cell. Fumonisin B1 could be quantified down to 1.5 µM (≈ 1 mg/L). The developed system represents a new approach to detect mycotoxins using enzymes and electrochemical methods. N2 - Zur Entwicklung von einfach zu bedienenden Vor-Ort-Geräten, welche für die Analytik von wichtigen Parametern in der Lebensmittelindustrie eingesetzt werden können, sind elektrochemische Methoden besonders vielversprechend. Viele Unternehmen führen bereits Mykotoxinanalytik in eigenen Laboren am Produktionsstandort durch, dennoch gibt es große Bestrebungen Analysenmethoden weiter zu vereinfachen. Der Enzyme-linked Immunosorbent Assay (ELISA), welcher häufig mit der Meerrettichperoxidase als enzymatischem Label und 3,3',5,5'-Tetramethylbenzidine (TMB)/H2O2 als Enzymsubstraten arbeitet, ermöglicht den sensitiven Mykotoxinnachweis mithilfe optischer Detektionsmethoden. Zur Miniaturisierung des Detektionsschrittes wurde in dieser Arbeit der Aufbau von elektrochemischen Detektionssystemen für die Mykotoxinanalytik untersucht. Dazu wurde zunächst die elektrochemische Reaktion von TMB an verschiedenen Materialien siebgedruckter Elektroden (Kohlenstoff und Gold) sowie bei verschiedenen pH-Werten (pH 1 und pH 4) untersucht. Eine stabile Elektrodenreaktion, welche die Grundlage für den weiteren Aufbau des elektrochemischen Detektionssystems darstellt, konnte bei pH 1 an Goldelektroden erzielt werden. Basierend darauf wurde eine amperometrische Detektionsmethode für oxidiertes TMB entwickelt, wofür eine maßgefertigte Durchflusszelle verwendet wurde. Die amperometrische TMB-Detektion wurde für einen kompetitiven Magnetpartikel-basierten Immunoassay für Ochratoxin A eingesetzt. Mit diesem Assay wurde eine Nachweisgrenze von 150 pM (60 ng L-1) erreicht und die Ergebnisse konnten durch optische Detektion verifiziert werden. Die Anwendbarkeit des Assays konnte in Ochratoxin A dotiertem Bier demonstriert werden, wobei für die Detektion ein tragbarer Potentiostat verwendet wurde, welcher über Bluetooth mit einem Smartphone verbunden war. Hiermit konnten niedrige Ochratoxin A Konzentration von bis zu 1.2 nM (0.5 µg L-1) bestimmt werden. Aufbauend auf dem entwickelten elektrochemischen Detektionssystem für TMB wurde die Anwendbarkeit des Ansatzes auf einen Magnetpartikel-basierten Immunoassay für das Ergotalkaloid Ergometrine, evaluiert. Unter optimierten Bedingungen konnte mit dem Assay eine Nachweisgrenze von 3 nM (1 µg L-1) erreicht werden. In mit Ergometrin versetztem Roggenmehl konnten Konzentrationen von 25 bis 250 µg kg-1 nachgewiesen werden. Die entwickelte elektrochemische Nachweismethode für TMB bietet einen vielversprechenden Ansatz für den Einsatz in vielen anderen Meerrettichperoxidase-basierten Assays. Für das Mykotoxin Fumonisin B1, wurde ein neues sensorisches System entwickelt, welches auf einem enzymatischen elektrochemischen Nachweis basiert. Hierfür wurde eine Aspergillus niger Fumonisin Aminoxidase (AnFAO) rekombinant als Fusionsprotein mit dem Maltose-bindenden Protein exprimiert. AnFAO katalysiert die oxidative Deaminierung von Fumonisinen, wobei H2O2 gebildet wird. Es konnte gezeigt werden, dass AnFAO eine hohe Lagerungs- und Temperaturstabilität hat. Für den Nachweis von Fumonisin B1 wurde das Enzym kovalent an Magnetpartikel gekoppelt. Das enzymatisch produzierte H2O2 konnte anschließend amperometrisch mithilfe von Preußisch Blau/Kohlenstoff-Elektroden in der maßgefertigten Durchflusszelle detektiert werden. Fumonisin B1 konnte bis zu einer Konzentration von 1,5 µM (≈ 1 mg L-1) quantifiziert werden. Das entwickelte System stellt einen neuen Ansatz dar, um Mykotoxine unter Nutzung von Enzymen und elektrochemischen Methoden zu detektieren. KW - mycotoxins KW - Mykotoxine KW - immunoassay KW - Immunoassay KW - food analysis KW - Lebensmittelanalytik KW - enzyme KW - Enzym KW - amperometry KW - Amperometrie Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-607477 ER - TY - THES A1 - Stanke, Sandra T1 - AC electrokinetic immobilization of influenza viruses and antibodies on nanoelectrode arrays for on-chip immunoassays T1 - AC elektrokinetische Immobilisierung von Influenzaviren und Antikörpern auf Nanoelektrodenarrays für on-Chip Immunoassays N2 - In the present thesis, AC electrokinetic forces, like dielectrophoresis and AC electroosmosis, were demonstrated as a simple and fast method to functionalize the surface of nanoelectrodes with submicrometer sized biological objects. These nanoelectrodes have a cylindrical shape with a diameter of 500 nm arranged in an array of 6256 electrodes. Due to its medical relevance influenza virus as well as anti-influenza antibodies were chosen as a model organism. Common methods to bring antibodies or proteins to biosensor surfaces are complex and time-consuming. In the present work, it was demonstrated that by applying AC electric fields influenza viruses and antibodies can be immobilized onto the nanoelectrodes within seconds without any prior chemical modification of neither the surface nor the immobilized biological object. The distribution of these immobilized objects is not uniform over the entire array, it exhibits a decreasing gradient from the outer row to the inner ones. Different causes for this gradient have been discussed, such as the vortex-shaped fluid motion above the nanoelectrodes generated by, among others, electrothermal fluid flow. It was demonstrated that parts of the accumulated material are permanently immobilized to the electrodes. This is a unique characteristic of the presented system since in the literature the AC electrokinetic immobilization is almost entirely presented as a method just for temporary immobilization. The spatial distribution of the immobilized viral material or the anti-influenza antibodies at the electrodes was observed by either the combination of fluorescence microscopy and deconvolution or by super-resolution microscopy (STED). On-chip immunoassays were performed to examine the suitability of the functionalized electrodes as a potential affinity-based biosensor. Two approaches were pursued: A) the influenza virus as the bio-receptor or B) the influenza virus as the analyte. Different sources of error were eliminated by ELISA and passivation experiments. Hence, the activity of the immobilized object was inspected by incubation with the analyte. This resulted in the successful detection of anti-influenza antibodies by the immobilized viral material. On the other hand, a detection of influenza virus particles by the immobilized anti-influenza antibodies was not possible. The latter might be due to lost activity or wrong orientation of the antibodies. Thus, further examinations on the activity of by AC electric fields immobilized antibodies should follow. When combined with microfluidics and an electrical read-out system, the functionalized chips possess the potential to serve as a rapid, portable, and cost-effective point-of-care (POC) device. This device can be utilized as a basis for diverse applications in diagnosing and treating influenza, as well as various other pathogens. N2 - In der vorliegenden Arbeit wurden AC elektrokinetische Kräfte, wie die Dielektrophorese und die AC Elektroosmose, als einfache und schnelle Methode zur Funktionalisierung der Oberfläche von Nanoelektroden mit biologischen Objekten in Submikrometergröße demonstriert. Diese Nanoelektroden haben eine zylindrische Form mit einem Durchmesser von 500 nm und sind in einem Array aus 6256 Elektroden angeordnet. Aufgrund ihrer medizinischen Relevanz wurden Influenzaviren sowie anti-Influenza Antikörper als Modellorganismus ausgewählt. Gängige Methoden, um Antikörper oder Proteine auf Biosensoroberflächen zu bringen, sind komplex und zeitaufwändig. In der vorliegenden Arbeit wurde gezeigt, dass durch die Anwendung elektrischer Wechselfelder Influenzaviren und Antikörper innerhalb von Sekunden auf den Nanoelektroden immobilisiert werden können, ohne dass zuvor eine chemische Modifikation der Oberfläche noch des immobilisierten biologischen Objekts erforderlich ist. Die Verteilung dieser immobilisierten Objekte ist über das gesamte Array ungleichmäßig. Es kommt zur Ausbildung eines Gradienten, welcher von der äußeren zur den inneren Reihen hin abnimmt. Verschiedene Ursachen für diesen Gradienten wurden diskutiert, beispielsweise der Vortex-förmige Flüssigkeitsstrom über den Nanoelektroden, der unter anderem durch elektrothermische Flüssigkeitsbewegung erzeugt wird. Es wurde gezeigt, dass Teile des akkumulierten Materials dauerhaft an den Elektroden immobilisiert sind. Dies ist ein Alleinstellungsmerkmal des vorgestellten Systems, da in der Literatur die AC elektrokinetische Immobilisierung fast ausschließlich als Methode nur zur temporären Immobilisierung dargestellt wird. Die räumliche Verteilung des immobilisierten Virusmaterials bzw. der anti-Influenza Antikörper an den Elektroden wurde entweder durch die Kombination aus Fluoreszenzmikroskopie und Dekonvolution oder durch super-resolution Mikroskopie (STED) betrachtet. Es wurden On-Chip-Immunoassays durchgeführt, um die Eignung der funktionalisierten Elektroden für einen potenziellen affinitätsbasierten Biosensor zu untersuchen. Dabei wurden zwei Ansätze verfolgt: A) Influenzaviren als Biorezeptor oder B) Influenzavirus als Analyt. Verschiedene Fehlerquellen wurden mittels ELISA und Passivierungsexperimente eliminiert. Infolgedessen wurde die Aktivität der immobilisierten Objekte durch Inkubation mit dem Analyten überprüft. Dies führte zum erfolgreichen Nachweis von anti-Influenza Antikörpern mittels immobilisiertem Virusmaterial. Andererseits war ein Nachweis von Influenzaviruspartikeln durch die immobilisierten anti-Influenza Antikörper nicht möglich. Letzteres könnte auf einen Aktivitätsverlust oder eine falsche Ausrichtung der Antikörper zurückzuführen sein. Daher sollten weitere Untersuchungen zur Aktivität von durch elektrische Wechselfelder immobilisierte Antikörper folgen. In Kombination mit Mikrofluidik und einem elektrischen Auslesesystem besitzen die funktionalisierten Chips das Potenzial, als schnelle, tragbare und kostengünstige Point-of-Care-Einheit (POC) zu dienen. Dieses Einheit kann als Grundlage für vielfältige Anwendungen bei der Diagnose und Behandlung von Influenza und verschiedenen anderen Krankheitserregern genutzt werden. KW - AC electrokinetics KW - AC Elektrokinetik KW - AC electroosmosis KW - AC Elektroosmosis KW - dielectrophoresis KW - Dielektrophorese KW - virus KW - Virus KW - influenza KW - Influenza KW - antibody KW - Antikörper KW - nanoelectrodes KW - Nanoelektroden KW - lab-on-chip KW - lab-on-chip KW - LOC KW - LOC KW - point-of-care KW - point-of-care KW - POC KW - POC KW - immunoassay KW - Immunoassay Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-617165 ER -