TY - THES A1 - Bomm, Jana T1 - Von Gold Plasmonen und Exzitonen : Synthese, Charakterisierung und Applikationen von Gold Nanopartikeln T1 - Of gold plasmons and excitons : synthesis, characterization and applications of gold nanoparticles N2 - In dieser Arbeit wurden sphärische Gold Nanopartikel (NP) mit einem Durchmesser größer ~ 2 nm, Gold Quantenpunkte (QDs) mit einem Durchmesser kleiner ~ 2 nm sowie Gold Nanostäbchen (NRs) unterschiedlicher Länge hergestellt und optisch charakterisiert. Zudem wurden zwei neue Synthesevarianten für die Herstellung thermosensitiver Gold QDs entwickelt werden. Sphärische Gold NP zeigen eine Plasmonenbande bei ~ 520 nm, die auf die kollektive Oszillation von Elektronen zurückzuführen ist. Gold NRs weisen aufgrund ihrer anisotropen Form zwei Plasmonenbanden auf, eine transversale Plasmonenbande bei ~ 520 nm und eine longitudinale Plasmonenbande, die vom Länge-zu-Durchmesser-Verhältnis der Gold NRs abhängig ist. Gold QDs besitzen keine Plasmonenbande, da ihre Elektronen Quantenbeschränkungen unterliegen. Gold QDs zeigen jedoch aufgrund diskreter Energieniveaus und einer Bandlücke Photolumineszenz (PL). Die synthetisierten Gold QDs besitzen eine Breitbandlumineszenz im Bereich von ~ 500-800 nm, wobei die Lumineszenz-eigenschaften (Emissionspeak, Quantenausbeute, Lebenszeiten) stark von den Herstellungs-bedingungen und den Oberflächenliganden abhängen. Die PL in Gold QDs ist ein sehr komplexes Phänomen und rührt vermutlich von Singulett- und Triplett-Zuständen her. Gold NRs und Gold QDs konnten in verschiedene Polymere wie bspw. Cellulosetriacetat eingearbeitet werden. Polymernanokomposite mit Gold NRs wurden erstmals unter definierten Bedingungen mechanisch gezogen, um Filme mit optisch anisotropen (richtungsabhängigen) Eigenschaften zu erhalten. Zudem wurde das Temperaturverhalten von Gold NRs und Gold QDs untersucht. Es konnte gezeigt werden, dass eine lokale Variation der Größe und Form von Gold NRs in Polymernanokompositen durch Temperaturerhöhung auf 225-250 °C erzielt werden kann. Es zeigte sich, dass die PL der Gold QDs stark temperaturabhängig ist, wodurch die PL QY der Proben beim Abkühlen (-7 °C) auf knapp 30 % verdoppelt und beim Erhitzen auf 70 °C nahezu vollständig gelöscht werden konnte. Es konnte demonstriert werden, dass die Länge der Alkylkette des Oberflächenliganden einen Einfluss auf die Temperaturstabilität der Gold QDs hat. Zudem wurden verschiedene neuartige und optisch anisotrope Sicherheitslabels mit Gold NRs sowie thermosensitive Sicherheitslabel mit Gold QDs entwickelt. Ebenso scheinen Gold NRs und QDs für die und die Optoelektronik (bspw. Datenspeicherung) und die Medizin (bspw. Krebsdiagnostik bzw. -therapie) von großem Interesse zu sein. N2 - In this thesis, the synthesis and optical characterization of spherical gold nanoparticles (NP) with diameters larger than ~ 2 nm, gold quantum dots (QDs) with diameters smaller than ~ 2 nm and gold nanorods (NRs) with different lengths are presented. In addition, a novel one-pot synthesis for the preparation of thermosensitive gold QDs is introduced. Gold NP solutions appear red colored due to their strong absorption in the visible range at ~ 520 nm. This absorption band is a result of surface plasmon resonance, which is caused by the coherent oscillation of conduction band electrons induced by an electromagnetic field. In contrast to spherical gold NPs, gold NRs show two surface plasmon bands due to their anisotropic shape, a transverse plasmon band at ~ 520 nm and a longitudinal plasmon band depending on the aspect ratio (length-to-width-ratio) of the gold NRs. If the size of the gold NPs decreases to values below ~ 2 nm, quantum-size confinement occurs and the surface plasmon band disappears. Additionally, the overlap between conduction band and valence band disappears, discrete electronic levels arise and a band gap is created. As a consequence of quantum confinement, the gold QDs show photoluminescence (PL) upon UV-irradiation. The gold QDs synthesized via the one-pot synthesis exhibit a broadband luminescence between 500 nm and 800 nm. The luminescence properties (emission peak, quantum yield, lifetime) strongly depend on the synthetic parameters like reaction temperature, stoichiometry and the surface ligand. Gold NRs and gold QDs were incoroporated into different polymers (e.g. cellulose triacetate). Polymer nanocomposite films showing optical anisotropy are obtainded by stretching polymer films containing gold NRs uniaxial in a tensile test machine. In addition to the optical characterization of gold NRs and QDs, their thermal behavior in solution as well as in different nanocomposites is studied. A shortening of the gold NRs or a transformation into spherical gold NP is observed, if the polymer nanocomposites containing gold NRs are heated above a temperature of 200 °C. The PL of the synthesized gold QDs strongly depends on the ambient temperature. An increase of PL quantum yield (QY) and PL lifetime occur, if the solutions are cooled. The best PL QY of 16.6 % was observed for octadecyl mercaptan capped gold QDs at room temperature, which could be improved to 28.6 % when cooling the solutions to -7 °C. Furthermore, optically anisotropic security labels containing gold NRs and thermosensitive security devices containing gold QDs are developed. Due to their unique optical properties, gold NRs and QDs are interesting candidates for optoelectronical as well as data storage devices and medical applications like biomedical imaging or cancer therapy. KW - Gold KW - Nanopartikel KW - Quantenpunkte KW - Nanostäbchen KW - Oberflächenplasmonenlasmonen KW - gold KW - nanoparticles KW - quantum dots KW - nanorods KW - surface plasmons Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66402 ER - TY - THES A1 - Morgner, Frank T1 - Quantenpunktbasiertes spektroskopisches Lineal mit Terbium-Komplexen als Donoren für optische FRET-Multiplexmessungen T1 - Quantum-dot based spectroscopic ruler with terbium-complexes as donors for multiplexed optical FRET measurements N2 - Der Förster-Resonanzenergietransfer (FRET) liefert einen wichtigen Beitrag bei der Untersuchung kleinskaliger biologischer Systeme und Prozesse. Möglich wird dies durch die r-6-Abhängigkeit des FRET, die es erlaubt Abstände und strukturelle Änderungen weit unterhalb der Beugungsgrenze des Lichts mit hoher Sensitivität und geringem Aufwand zu bestimmen. Die besonderen photophysikalischen Eigenschaften von Terbiumkomplexen (LTC) und Quantenpunkten (QD) machen sie zu geeigneten Kandidaten für hochsensitive und störungsarme Multiplex-Abstandsmessungen in biologischen Systemen und Prozessen. Die Abstandsbestimmungen setzen jedoch eine genaueste Kenntnis des Mechanismus des Energietransfers von LTC auf QD ebenso voraus, wie das Wissen um Größe und Gestalt letzterer. Quantenpunkte haben im Vergleich zu biologischen Strukturen ähnliche Dimensionen und können nicht als punktförmig betrachtet werden, wie es bei einfacheren Farbstoffen möglich ist. Durch ihre Form kommt es zu einer Abstandsverteilung innerhalb des Donor-Akzeptorsystems. Dies beeinflusst den Energietransfer und damit die experimentellen Ergebnisse. In dieser Arbeit wurde der Energietransfer von LTC auf QD untersucht, um zu einer Aussage hinsichtlich des Mechanismus der Energieübertragung und der dabei zu berücksichtigenden photophysikalischen und strukturellen Parameter von LTC und QD zu gelangen. Mit der Annahme einer Abstandsverteilung sollten die Größen der Quantenpunkte bestimmt und der Einfluss von Form und Gestalt auf den Energietransfer betrachtet werden. Die notwendigen theoretischen und praktischen Grundlagen wurden eingangs dargestellt. Daran schlossen sich Messungen zur photophysikalischen Charakterisierung der Donoren und Akzeptoren an, die Grundlage der Berechnung der FRET-Parameter waren. Die Förster-Radien zeigten die für den FRET von LTC auf QD typischen extrem hohen Werte von bis zu 11 nm. Zeitaufgelöste Messungen der FRET-induzierten Lumineszenz der Donoren und Akzeptoren in den beiden biomolekularen Modellsystemen Zink-Histidin und Biotin-Streptavidin beschlossen den praktischen Teil. Als Donor wurde Lumi4Tb gebunden an ein Peptid bzw. Streptavidin genutzt, Akzeptoren waren fünf verschiedene, kommerziell erhältliche Quantenpunkte mit Carboxyl- bzw. Biotinfunktionalisierung. Bei allen Donor-Akzeptor-Paarungen konnte FRET beobachtet und ausgewertet werden. Es konnte gezeigt werden, dass die gesamte Emission des Terbiums zum Energietransfer beiträgt und der Orientierungsfaktor ² den Wert 2/3 annimmt. Die Charakterisierung der Bindungsverhältnisse innerhalb der FRET-Paare von LTC und QD über Verteilungsfunktionen bietet über die Form der Verteilungskurve die Möglichkeit Aussagen über die Gestalt der FRET-Partner zu treffen. So war es möglich, die mittlere Form der Quantenpunkte als Sphäre zu bestimmen. Dies entsprach, insbesondere bei den in z-Richtung des Kristallgitters elongierten Quantenpunkten, nicht den Erwartungen. Dieser Befund ermöglicht daher bei zukünftigen Messungen eine Verbesserung der Genauigkeit bei Abstandsbestimmungen mit Quantenpunkten. Neben der Ermittlung der die FRET-Verteilung bestimmenden Gestalt der Quantenpunkte konnte im Rahmen dieser Arbeit anhand vergleichender Messungen die Dicke der Polymerhülle der QD bestimmt und so gezeigt werden, dass FRET-Paare aus lumineszenten Terbiumkomplexen und Quantenpunkten in der Lage sind, Abstände im Nano- bis Sub-Nanometerbereich aufzulösen. N2 - Förster resonance energy transfer (FRET) plays an important role in the study of small-scale biological systems and processes. This is made possible by the r-6-dependence of FRET, which allows for determination of distances and structural changes far below the diffraction limit of light with high sensitivity and low costs. The unique photophysical properties of terbium complexes (LTC) and quantum dots (QDs) make them suitable candidates for high-sensitivity, low-noise multiplex distance measurements in biological systems and processes. Estimating distances with these FRET-pairs requires a precise knowledge of the mechanism of energy transfer from LTC to QD as well as the knowledge of size and shape of the latter. Quantum dots have, compared to biological structures, similar dimensions and therefore can not be considered as point-like, as it is possible with smaller dyes. Due to their shape, there is a distance distribution within the donor-acceptor system. This influences the energy transfer and hence the experimental results. In this work, the energy transfer from LTC to QD was examined to come to a conclusion regarding the mechanism of energy transfer and the photophysical and structural parameters of LTC and QD to be considered. The adoption of a FRET-distance distribution due to a size distribution of quantum dots should yield to a size estimation of the nanoparticles as well as a conclusion of the influence of shape and form on energy transfer. The necessary theoretical and practical principles were described at the outset of this work. This description of the basic concepts was followed by the photophysical characterization of the donors and acceptors and the calculation of FRET parameters. The calculated Förster radii were typical for the FRET from LTC to QD and showed extremely high values of up to 11 nm. Time-resolved measurements of the FRET-induced luminescence of donors and acceptors in two biomolecular model binding systems namely zinc-histidine and biotin-streptavidin binding rounded the practical part. FRET-donors used were commercially available Lumi4Tb complexes bound to streptavidin or a peptide, respectively. As FRET-acceptors five different commercially available quantum dots with carboxyl- or biotin-functionalisation were used. For all donor-acceptor pairs FRET could be observed and evaluated. It could be shown that the whole emission of terbium contributes to energy transfer. Furthermore the orientation factor ² was estimated to have a value of 2/3 when using LTC as FRET-donors and QD as FRET-acceptors. The characterization of the bonding within the FRET pairs of LTC and QD with distribution functions allows for statements about the shape of the FRET partners via shape of the distribution curves. It was possible to determine the average shape of the quantum dots as a sphere. This outcome was, especially for (in z-direction of the crystal lattice) elongated quantum dots, in the contrary to the expectations. This finding therefore allows for improving the accuracy of distance determinations with quantum dots. Based on comparative measurements it was also possible to determine the thickness of the polymer shell of the QD demonstrating that FRET pairs of luminescent terbium complexes and quantum dots are capable of determining distances in the nanometer to sub-nanometer range. KW - Quantenpunkte KW - Lanthanoidkomplexe KW - FRET KW - Abstandsverteilungen KW - spektroskopisches Lineal KW - quantum dots KW - lanthanide complexes KW - FRET KW - distance distribution KW - spectroscopic ruler Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-63576 ER - TY - THES A1 - Kärgell, Martin T1 - Layer formation from perovskite nanoparticles with tunable optical and electronic properties N2 - Hybrid organic-inorganic perovskites have attracted attention in recent years, caused by the incomparable increase in efficiency in energy convergence, which implies the application as an absorber material for solar cells. A disadvantage of these materials is, among others, the instability to moisture and UV-radiation. One possible solution for these problems is the reduction of the size towards the nano world. With that nanosized perovskites are showing superior stability in comparison to e.g. perovskite layers. Additionally to this the nanosize even enables stable perovskite structures, which could not be achieved otherwise at room temperature. This thesis is separated into two major parts. The separation is done by the composition and the band gap of the material and at the same time the shape and size of the nanoparticles. Here the division is made by the methylammonium lead tribromide nanoplatelets and the caesium lead triiodide nanocubes. The first part is focusing on the hybrid organic-inorganic perovskite (methylammonium lead tribromide) nanoplatelets with a band gap of 2.35 eV and their thermal behaviour. Due to the challenging character of this material, several analysis methods are used to investigate the sub nano and nanostructures under the influence of temperature. As a result, a shift of phase-transition temperatures towards higher temperatures is observed. This unusual behaviour can be explained by the ligand, which is incorporated in the perovskite outer structure and adds phase-stability into the system. The second part of this thesis is focusing on the inorganic caesium lead triiodide nanocubes with a band gap of 1.83 eV. These nanocrystals are first investigated and compared by TEM, XRD and other optical methods. Within these methods, a cuboid and orthorhombic structure are revealed instead of the in literature described cubic shape and structure. Furthermore, these cuboids are investigated towards their self-assembly on a substrate. Here a high degree in self-assembly is shown. As a next step, the ligands of the nanocuboids are exchanged against other ligands to increase the charge carrier mobility. This is further investigated by the above-mentioned methods. The last section is dealing with the enhancement of the CsPbI3 structure, by incorporating potassium in the crystal structure. The results are suggesting here an increase in stability. N2 - Hybrid organisch-anorganisch Perowskite zeigten sich in den letzten Jahren, durch ihren unvergleichbaren Anstieg an Effizienz in der Energiekonversion, als herausragendes Material für die Anwendung als Solarzellen Absorbermaterial. Ein Nachteil dieser Materialien ist allerdings unteranderem ihre Instabilität gegenüber Feuchtigkeit und UV-Strahlung. Eine Möglichkeit, diese Herausforderungen zu meistern, bietet die Nanowelt. So zeigen Perowskitstrukturen in Nanogröße eine dem Schichten überlegene Stabilität. Des Weiteren sind durch die Nanogröße auch Verbindungen bei Raumtemperatur stabil, die als Schicht oder Einkristall nicht darzustellen sind. Diese Arbeit ist unterteilt in zwei Teile. Unterteilt nach Zusammensetzung, Bandlücke und Form der Nanopartikel, in Methylammonium Blei Tribromid Nanoplättchen und Cäsium Blei Triiodid Nanokuben. Im ersten Teil werden hybrid organisch-anorganische Perowskite (Methylammonium Blei tribromid) Nanoplättchen mit einer Bandlücke von 2.35 eV auf ihr thermisches Verhalten untersucht. Aufgrund der herausfordernden Eigenschaften der Nanomaterialien, werden mehrere Analysemethoden verwendet und sowohl die Subnanostruktur als auch die Nanostruktur unter Veränderung der Temperatur beobachtet. Dabei wird ein Verschub der Phasenübergangstemperatur zu höheren Temperaturen beobachtet. Erklärt werden kann dieses ungewöhnliche Verhalten durch die Berücksichtigung des organischen Liganden der Nanoplättchen, welcher einen Einfluß auf den Phasenübergang hat. Im zweiten Teil der Arbeit werden anorganische Perowskit (Cäsium Blei triodid) Nanokuben mit einer Bandlücke von 1.83 eV untersucht. Diese werden als Erstes mittels TEM, XRD und optischen Analysemethoden untersucht und verglichen. Als Resultat stellen sich die Kuben, als Quader einer orthorhombischen Phase heraus. Anschließend erfolgt eine Untersuchung der Selbstanordnung der Schichten auf einem Substrat, welche einen hohen Grad der Selbstanordnung zeigt. Um die Ladungsträgermobilität in den Schichten zu erhöhen, werden verschiedene Ligandenaustauschreaktionen durchgeführt und diese mittels der oben genannten Methoden untersucht. Dabei konnte ein Anstieg der Ladungsträgermobilität um das Sechsfache im Vergleich zur Literatur beobachtet werden. Im letzten Teil wird versucht die Stabilität der Nanokristalle, durch das Einbinden von Kalium in die Perowskitstruktur, zu erhöhen. Die hier vorliegenden Ergebnisse deuten eine Erhöhung der Stabilität an. T2 - Schichtbildung von Perowskit Nanopartikeln mit einstellbaren optischen und elektronischen Eigenschaften KW - Perovskite KW - Nanoparticle KW - Quantumdots KW - Perowskit KW - Nanopartikel KW - Nanoplättchen KW - Quantenpunkte Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-475667 ER - TY - THES A1 - Hildebrandt, Niko T1 - Lanthanides and quantum dots : time-resolved laser spectroscopy of biochemical Förster Resonance Energy Transfer (FRET) systems T1 - Lanthanide und Quantenpunkte : zeitaufgelöste Laserspektroskopie an biochemischen Förster-Resonanzenergietransfer (FRET) Systemen N2 - Förster Resonance Energy Transfer (FRET) plays an important role for biochemical applications such as DNA sequencing, intracellular protein-protein interactions, molecular binding studies, in vitro diagnostics and many others. For qualitative and quantitative analysis, FRET systems are usually assembled through molecular recognition of biomolecules conjugated with donor and acceptor luminophores. Lanthanide (Ln) complexes, as well as semiconductor quantum dot nanocrystals (QD), possess unique photophysical properties that make them especially suitable for applied FRET. In this work the possibility of using QD as very efficient FRET acceptors in combination with Ln complexes as donors in biochemical systems is demonstrated. The necessary theoretical and practical background of FRET, Ln complexes, QD and the applied biochemical models is outlined. In addition, scientific as well as commercial applications are presented. FRET can be used to measure structural changes or dynamics at distances ranging from approximately 1 to 10 nm. The very strong and well characterized binding process between streptavidin (Strep) and biotin (Biot) is used as a biomolecular model system. A FRET system is established by Strep conjugation with the Ln complexes and QD biotinylation. Three Ln complexes (one with Tb3+ and two with Eu3+ as central ion) are used as FRET donors. Besides the QD two further acceptors, the luminescent crosslinked protein allophycocyanin (APC) and a commercial fluorescence dye (DY633), are investigated for direct comparison. FRET is demonstrated for all donor-acceptor pairs by acceptor emission sensitization and a more than 1000-fold increase of the luminescence decay time in the case of QD reaching the hundred microsecond regime. Detailed photophysical characterization of donors and acceptors permits analysis of the bioconjugates and calculation of the FRET parameters. Extremely large Förster radii of more than 100 Å are achieved for QD as acceptors, considerably larger than for APC and DY633 (ca. 80 and 60 Å). Special attention is paid to interactions with different additives in aqueous solutions, namely borate buffer, bovine serum albumin (BSA), sodium azide and potassium fluoride (KF). A more than 10-fold limit of detection (LOD) decrease compared to the extensively characterized and frequently used donor-acceptor pair of Europium tris(bipyridine) (Eu-TBP) and APC is demonstrated for the FRET system, consisting of the Tb complex and QD. A sub-picomolar LOD for QD is achieved with this system in azide free borate buffer (pH 8.3) containing 2 % BSA and 0.5 M KF. In order to transfer the Strep-Biot model system to a real-life in vitro diagnostic application, two kinds of imunnoassays are investigated using human chorionic gonadotropin (HCG) as analyte. HCG itself, as well as two monoclonal anti-HCG mouse-IgG (immunoglobulin G) antibodies are labeled with the Tb complex and QD, respectively. Although no sufficient evidence for FRET can be found for a sandwich assay, FRET becomes obvious in a direct HCG-IgG assay showing the feasibility of using the Ln-QD donor-acceptor pair as highly sensitive analytical tool for in vitro diagnostics. N2 - Förster Resonanzenergietransfer (FRET) spielt eine wichtige Rolle in biochemischen Anwendungen, wie z.B. DNA-Sequenzierung, intrazellulären Protein-Protein-Wechselwirkungen, molekularen Bindungsstudien, in-vitro-Diagnostik und vielen anderen. Zur quantitativen und qualitativen Analyse werden FRET Systeme normalerweise durch molekulare Erkennung von Biomolekülen, die mit Donator- und Acceptorluminophoren markiert sind, ermöglicht. Durch die besonderen photophysikalischen Eigenschaften sowohl von Lanthanidkomplexen (Ln-Komplexen), als auch Halbleiternanokristallen (sog. Quantenpunkten oder Quantumdots - QD), sind diese besonders für FRET Anwendungen geeignet. In der vorliegenden Arbeit wird effizienter FRET zwischen Ln-Komplexen und QD in biochemischen Systemen demonstriert. Die notwendigen theoretischen und praktischen Grundlagen über FRET, Ln-Komplexe, QD und die verwendeten biochemischen Modelle werden dargestellt, und wissenschaftliche als auch kommerzielle Anwendungen werden präsentiert. FRET kann zur Messung von strukturellen Veränderungen und Dynamiken im Bereich von ca. 1 bis 10 nm verwendet werden. Der sehr starke und gut charakterisierte Bindungsprozess zwischen Streptavidin (Strep) und Biotin (Biot) wird als biomolekulares Modellsystem eingesetzt. Ein FRET System wird durch Streptavidinkonjugation mit Ln-Komplexen und QD-Biotinylierung etabliert. Drei Ln-Komplexe (einer mit Tb3+ und zwei mit Eu3+ als Zentralion) werden als Donatoren verwendet, und neben QD werden zwei weitere Acceptoren, das lumineszierende, quervernetzte Protein Allophycocyanin (APC) und ein kommerzieller Fluoreszenzfarbstoff (DY633), untersucht. FRET kann für alle Donator-Acceptor Paare nachgewiesen werden, zum einen durch sensibilisierte Acceptorlumineszenz und zum anderen durch eine über 1000-fach erhöhte Lumineszenzabklingzeit der QD mit über 100 Mikrosekunden. Mittels detailierter photophysikalischer Charakterisierung der Donatoren und Acceptoren können die Biokonjugate analysiert und die FRET Parameter berechnet werden. Für die QD FRET Systeme ergeben sich extrem große Försterradien von über 100 Å, die wesentlich größer sind als für APC und DY633 (ca. 80 bzw. 60 Å). Besondere Aufmerksamkeit gilt der Wechselwirkung mit den Zusatzreagenzien Boratpuffer, Bovines Serumalbumin (BSA), Natriumazid und Kaliumfluorid (KF) in den wässrigen Lösungen. Im Vergleich zum ausgiebig charakterisierten und vielfach verwendeten Donator-Acceptor Paar aus Europium-tris(Bipyridin) (Eu-TBP) und APC wird eine mehr als 10-fache Senkung der Nachweisgrenze für das FRET-System, bestehend aus Tb-Komplex und QD, erreicht. In azidfreiem Boratpuffer (pH 8,3) mit 2 % BSA und 0,5 M KF wird eine subpicomolare QD-Nachweisgrenze für dieses System aufgezeigt. Um den Transfer des Strep-Biot Modellsystems in eine echte in-vitro-diagnostische Anwendung zu demonstrieren, werden zwei Immuntests zum HCG-(Humanes Choriongonadotropin)-Nachweis untersucht. Sowohl HCG als auch monoklonale anti-HCG Maus-IgG-(Immunoglobulin G)-Antikörper werden mit dem Tb-Komplex bzw. mit QD markiert. Obwohl kein ausreichender Nachweis für FRET in einem immunometrischen Assay (oder Sandwichassay) erbracht werden kann, wird FRET in einem direkten HCG-IgG Assay erzielt, wodurch die Realisierbarkeit von Ln-QD Donator-Acceptor Paaren zur hochsensitiven Anwendung in der in-vitro-Diagnostik gezeigt werden kann. KW - FRET KW - Lanthanide KW - Quantenpunkte KW - Zeitaufgelöster Immunoassay KW - Spektroskopie KW - FRET KW - Lanthanides KW - Quantum Dots KW - Time-resolved Immunoassay KW - Spectroscopy Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12686 ER -