TY - THES A1 - You, Zewang T1 - Conformational transition of peptide-functionalized cryogels enabling shape-memory capability Y1 - 2017 ER - TY - JOUR A1 - Schweighöfer, F. A1 - Moreno, J. A1 - Bobone, Sara A1 - Chiantia, Salvatore A1 - Herrmann, A. A1 - Hecht, S. A1 - Wachtveitl, Josef T1 - Connectivity pattern modifies excited state relaxation dynamics of fluorophore-photoswitch molecular dyads JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - In order to modulate the emission of BODIPY fluorophores, they were connected to a diarylethene (DAE) photoswitch via phenylene-ethynylene linkers of different lengths and orientations. The latter allowed for modulation of the electronic coupling in the prepared four BODIPY-DAE dyads, which were compared also to appropriate BODIPY and DAE model compounds by steady state as well as time-resolved spectroscopies. In their open isomers, all dyads show comparable luminescence behavior indicative of an unperturbed BODIPY fluorophore. In strong contrast, in the closed isomers the BODIPY emission is efficiently quenched but the deactivation mechanism depends on the nature of the linker. The most promising dyad was rendered water-soluble by means of micellar encapsulation and aqueous suspensions were investigated by fluorescence spectroscopy and microscopy. Our results (i) illustrate that the electronic communication between the BODIPY and DAE units can indeed be fine-tuned by the nature of the linker to achieve fluorescence modulation while maintaining photoswitchability and (ii) highlight potential applications to image and control biological processes with high spatio-temporal resolution. Y1 - 2016 U6 - https://doi.org/10.1039/c6cp07112k SN - 1463-9076 SN - 1463-9084 VL - 19 SP - 4010 EP - 4018 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Vacogne, Charlotte D. A1 - Schlaad, Helmut T1 - Controlled ring-opening polymerization of alpha-amino acid N-carboxyanhydrides in the presence of tertiary amines JF - Polymer : the international journal for the science and technology of polymers N2 - The mechanism of the primary ammonium/tertiary amine-mediated ring-opening polymerization of gamma-benzyl-L-glutamate N-carboxyanhydride (BLG-NCA) was investigated. Kinetic analyses revealed that the normal amine mechanism (NAM) together with a dormant-active chain end equilibrium were responsible for the controlled nature of this polymerization pathway, but that the polymerization also proceeded via the activated monomer mechanism (AMM). Mixtures of primary amines (1 equiv) and tertiary amines (0-1.5 equiv) were therefore tested to confirm the co-existence of the NAM and AMM and determine the limits for a controlled polymerization. For tertiary amine molar fractions smaller than 0.8 equiv, the reaction times were greatly reduced (compared to primary amine-initiated polymerization) without compromising the control of the reaction. Hence, the polymerization of NCA can proceed in a controlled manner even when the AMM contributes to the overall chain growth mechanism. (C) 2017 Elsevier Ltd. All rights reserved. KW - Ring-opening polymerization KW - Amino acid N-carboxyanhydride KW - NCA KW - Kinetics KW - Mechanism Y1 - 2017 U6 - https://doi.org/10.1016/j.polymer.2017.07.062 SN - 0032-3861 SN - 1873-2291 VL - 124 SP - 203 EP - 209 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Schilde, Uwe A1 - Paz, Christian A1 - Ortiz, Leandro T1 - Crystal structure of erioflorin isolated from Podanthus mitiqui (L.) JF - Acta Crystallographica Section E : Crystallographic Communications N2 - The title compound, erioflorin, C19H24O6 [systematic name: (1aR,3S,4Z,5aR,8aR,9R,10aR)-1a, 2,3,5a, 7,8,8a, 9,10,10a-decahydro-3-hydroxy-4,10a-dimethyl-8-methylidene-7-oxooxireno[5,6] cyclodeca[1,2-b]furan-9-yl methacrylate], is a tricyclic germacrane sesquiterpene lactone, which was isolated from Podanthus mitiqui (L.). The compound crystallizes in the space group P2(1)2(1)2(1), and its molecular structure consists of a methacrylic ester of a ten-membered ring sesquiterpenoid annelated with an epoxide and a butyrolactone. The structure is stabilized by one intramolecular C-H center dot center dot center dot O hydrogen bond. An O-H center dot center dot center dot O hydrogen bond and further C-H center dot center dot center dot O interactions can be observed in the packing. KW - crystal structure KW - germacrane sesquiterpene lactone KW - Podanthus mitiqui Y1 - 2017 U6 - https://doi.org/10.1107/S2056989017001700 VL - 73 IS - 3 SP - 334 EP - 337 PB - International Union of Crystallography CY - Chester ER - TY - GEN A1 - Schilde, Uwe A1 - Paz, Christian A1 - Ortiz, Leandro T1 - Crystal structure of erioflorin isolated from Podanthus mitiqui (L.) N2 - The title compound, erioflorin, C19H24O6 [systematic name: (1aR,3S,4Z,5aR,8aR,9R,10aR)-1a, 2,3,5a, 7,8,8a, 9,10,10a-decahydro-3-hydroxy-4,10a-dimethyl-8-methylidene-7-oxooxireno[5,6] cyclodeca[1,2-b]furan-9-yl methacrylate], is a tricyclic germacrane sesquiterpene lactone, which was isolated from Podanthus mitiqui (L.). The compound crystallizes in the space group P2(1)2(1)2(1), and its molecular structure consists of a methacrylic ester of a ten-membered ring sesquiterpenoid annelated with an epoxide and a butyrolactone. The structure is stabilized by one intramolecular C-H center dot center dot center dot O hydrogen bond. An O-H center dot center dot center dot O hydrogen bond and further C-H center dot center dot center dot O interactions can be observed in the packing. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 379 KW - Podanthus mitiqui KW - crystal structure KW - germacrane sesquiterpene lactone Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-401832 ER - TY - THES A1 - Jordan, Thomas T1 - CxNy-materials from supramolecular precursors for “All-Carbon” composite materials T1 - CxNy-Materialien aus supramolekularen Precursoren für „All-Carbon“-Komposit-Materialien N2 - Among modern functional materials, the class of nitrogen-containing carbons combines non-toxicity and sustainability with outstanding properties. The versatility of this materials class is based on the opportunity to tune electronic and catalytic properties via the nitrogen content and –motifs: This ranges from the electronically conducting N-doped carbon, where few carbon atoms in the graphitic lattice are substituted by nitrogen, to the organic semiconductor graphitic carbon nitride (g-C₃N₄), with a structure based on tri-s-triazine units. In general, composites can reveal outstanding catalytic properties due to synergistic behavior, e.g. the formation of electronic heterojunctions. In this thesis, the formation of an “all-carbon” heterojunction was targeted, i.e. differences in the electronic properties of the single components were achieved by the introduction of different nitrogen motives into the carbon lattice. Such composites are promising as metal-free catalysts for the photocatalytic water splitting. Here, hydrogen can be generated from water by light irradiation with the use of a photocatalyst. As first part of the heterojunction, the organic semiconductor g-C₃N₄ was employed, because of its suitable band structure for photocatalytic water splitting, high stability and non-toxicity. The second part was chosen as C₂N, a recently discovered semiconductor. Compared to g-C₃N₄, the less nitrogen containing C₂N has a smaller band gap and a higher absorption coefficient in the visible light range, which is expected to increase the optical absorption in the composite eventually leading to an enhanced charge carrier separation due to the formation of an electronic heterojunction. The aim of preparing an “all-carbon” composite included the research on appropriate precursors for the respective components g-C₃N₄ and C₂N, as well as strategies for appropriate structuring. This was targeted by applying precursors which can form supramolecular pre-organized structures. This allows for more control over morphology and atom patterns during the carbonization process. In the first part of this thesis, it was demonstrated how the photocatalytic activity of g-C₃N₄ can be increased by the targeted introduction of defects or surface terminations. This was achieved by using caffeine as a “growth stopping” additive during the formation of the hydrogen-bonded supramolecular precursor complexes. The increased photocatalytic activity of the obtained materials was demonstrated with dye degradation experiments. The second part of this thesis was focused on the synthesis of the second component C₂N. Here, a deep eutectic mixture from hexaketocyclohexane and urea was structured using the biopolymer chitosan. This scaffolding resulted in mesoporous nitrogen-doped carbon monoliths and beads. CO₂- and dye-adsorption experiments with the obtained monolith material revealed a high isosteric heat of CO₂-adsorption and showed the accessibility of the monolithic pore system to larger dye molecules. Furthermore, a novel precursor system for C₂N was explored, based on organic crystals from squaric acid and urea. The respective C₂N carbon with an unusual sheet-like morphology could be synthesized by carbonization of the crystals at 550 °C. With this precursor system, also microporous C₂N carbon with a BET surface area of 865 m²/g was obtained by “salt-templating” with ZnCl₂. Finally, the preparation of a g-C₃N₄/C₂N “all carbon” composite heterojunction was attempted by the self-assembly of g-C₃N₄ and C₂N nanosheets and tested for photocatalytic water splitting. Indeed, the composites revealed high rates of hydrogen evolution when compared to bulk g-C₃N₄. However, the increased catalytic activity was mainly attributed to the high surface area of the nanocomposites rather than to the composition. With regard to alternative composite synthesis ways, first experiments indicated N-Methyl-2-pyrrolidon to be suitable for higher concentrated dispersion of C₂N nanosheets. Eventually, the results obtained in this thesis provide precious synthetic contributions towards the preparation and processing of carbon/nitrogen compounds for energy applications. N2 - Eine interessante Materialklasse für technologische Anwendungen sind Kohlenstoff/Stickstoff-Materialien, die sich durch Ungiftigkeit und Umweltfreundlichkeit bei gleichzeitig interessanten katalytischen Eigenschaften auszeichnen. Die Vielseitigkeit dieser Materialkasse basiert auf der Möglichkeit ihre katalytischen und elektronischen Eigenschaften über Stickstoff-Anteil und –Funktionalitäten zu beeinflussen. Die vorliegende Arbeit fokussierte sich auf Komposite zwischen verschiedenen Kohlenstoff/Stickstoff-Derivaten, für welche aufgrund ihrer unterschiedlichen elektronischen Eigenschaften die Bildung elektronischer Heteroübergänge erwartet werden kann. Solche Komposite sind vielversprechende Materialien für die Erzeugung von Wasserstoff durch die photokatalytische Spaltung von Wasser. Für die eine Komponente des Komposits wurde das graphitische Kohlenstoffnitrid g-C₃N₄ eingesetzt, welches durch seine elektronische Struktur und Stabilität ein geeignetes Material für die photokatalytische Wasserspaltung ist. Für die andere Komponente des Komposits wurde eine erst kürzlich erstmalig beschriebene Kohlenstoff/Stickstoff Verbindung eingesetzt, das Kohlenstoffnitrid C₂N. Für dieses Komposit ist eine im Vergleich zu den einzelnen Komponenten stark erhöhte photokatalytische Aktivität zu erwarten. Neben dem Ziel der Herstellung eines solchen Komposits, fokussierte sich diese Arbeit auch darauf, neue Wege zur Synthese und Strukturierung der einzelnen Komponenten zu entwickeln. Dies sollte über supramolekulare Präkursor-Komplexe erfolgen, mit welchen eine erhöhte Einflussnahme auf Karbonisierungsprozesse erlangt werden kann. Im ersten Teil der Arbeit, welcher auf das graphitische Kohlenstoffnitrid g-C₃N₄ fokussiert war, wurde gezeigt wie die photokatalytische Aktivität dieser Komponente durch den gezielten Einbau von Defekten erhöht werden kann. Dies wurde über einen durch Koffein modifizierten supramolekularen Komplex als Präkursor erreicht. Die erhöhte photokatalytische Aktivität wurde über Farbstoff-Zersetzung nachgewiesen. Der zweite Teil der Arbeit war auf die Herstellung und Strukturierung der neuartigen Verbindung C₂N fokussiert. Hier wurde gezeigt, wie eine eutektische Mischung zwischen Hexaketocyclohexan und Harnstoff als C₂N-Präkursor mit dem Polysaccharid Chitosan strukturiert werden kann. Hierbei wurden poröse Stickstoffhaltige Kohlenstoff-Monolithen und -Perlen erhalten, die eine hohe Adsorptionswärme für die CO₂-Adsorption zeigten. Weiterhin wurde ein neuartiger Präkursor für C₂N vorgestellt, eine organisch-kristalline Verbindung zwischen Quadratsäure und Harnstoff. Durch Karbonisation dieser Verbindung bei 550 °C wurde ein Material mit einer Zusammensetzung von C₂N und einer ungewöhnlichen, schichtartigen Morphologie erhalten. Über eine eutektische Salzschmelze mit Zinkchlorid, konnte mit diesem Präkursor-System auch mikroporöser C₂N-Kohlenstoff mit einer BET-Oberfläche von 865 m²/g hergestellt werden. Im letzten Teil dieser Arbeit wurde die Herstellung des g-C₃N₄/C₂N-Komposits versucht, über die Selbstassemblierung von kolloidal dispergierten g-C₃N₄- und C₂N-Nanopartikeln. Die Nanopartikel wurden über Ultraschall-Behandlungen von Dispersionen dieser Komponenten hergestellt. Die erhaltenen Komposite zeigten eine hohe Aktivität zur photokatalytischen Wasserspaltung, wobei dies eher auf die hohe Oberfläche der Nanopartikel als auf ihre Zusammensetzung zurückgeführt wurde. Im Hinblick auf mögliche Alternativen zur Kompositherstellung, wurden erste Experimente zu höher konzentrierten kolloidalen Dispersionen von C₂N in dem organischen Lösungsmittel N-Methyl-2-pyrrolidon durchgeführt. Zusammenfassend, die Ergebnisse die in dieser Arbeit erhalten wurden, liefern einen wertvollen Beitrag zur Synthese und Strukturierung von Kohlenstoff/Stickstoff-Materialien sowie deren Anwendungen im Bereich alternative Energien. KW - carbon nitrides KW - supramolecular chemistry KW - porous materials KW - composite materials KW - photocatalysis KW - Kohlenstoffnitride KW - supramolekulare Chemie KW - poröse Materialien KW - Komposite KW - Photokatalyse Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398855 ER - TY - JOUR A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Sander, Mathias A1 - Koopman, Wouter-Willem Adriaan A1 - Schuetz, Roman A1 - Bargheer, Matias A1 - Koetz, Joachim T1 - Deposition of Gold Nanotriangles in Large Scale Close-Packed Monolayers for X-ray-Based Temperature Calibration and SERS Monitoring of Plasmon-Driven Catalytic Reactions JF - ACS applied materials & interfaces KW - gold nanotriangles KW - monolayer formation KW - SERS KW - dimerization KW - heat measurement Y1 - 2017 U6 - https://doi.org/10.1021/acsami.7b07231 SN - 1944-8244 VL - 9 SP - 20247 EP - 20253 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Schwarze, Thomas A1 - Mueller, Holger A1 - Schmidt, Darya A1 - Riemer, Janine A1 - Holdt, Hans-Jürgen T1 - Design of Na+-Selective Fluorescent Probes: A Systematic Study of the Na+-Complex Stability and the Na+/K+ Selectivity in Acetonitrile and Water JF - Chemistry - a European journal N2 - There is a tremendous demand for highly Na+-selective fluoroionophores to monitor the top analyte Na+ in life science. Here, we report a systematic route to develop highly Na+/K+ selective fluorescent probes. Thus, we synthesized a set of fluoroionophores 1, 3, 4, 5, 8 and 9 (see Scheme 1) to investigate the Na+/K+ selectivity and Na(+-)complex stability in CH3CN and H2O. These Na+-probes bear different 15-crown-5 moieties to bind Na+ stronger than K+. In the set of the diethylaminocoumarin-substituted fluoroionophores 1-5, the following trend of fluorescence quenching 1 > 3 > 2 > 4 > 5 in CH3CN was observed. Therefore, the flexibility of the aza-15-crown-5 moieties in 1-4 determines the conjugation of the nitrogen lone pair with the aromatic ring. As a consequence, 1 showed in CH3CN the highest Na+-induced fluorescence enhancement (FE) by a factor of 46.5 and a weaker K+ induced FE of 3.7. The Na+-complex stability of 1-4 in CH3CN is enhanced in the following order of 2 > 4 > 3 > 1, assuming that the O-atom of the methoxy group in the ortho-position, as shown in 2, strengthened the Na+-complex formation. Furthermore, we found for the N( o-methoxyphenyl) aza-15-crown-5 substituted fluoroionophores 2, 8 and 9 in H2O, an enhanced Na+-complex stability in the following order 8 > 2 > 9 and an increased Na+/K+ selectivity in the reverse order 9 > 2 > 8. Notably, the Na+-induced FE of 8 (FEF = 10.9), 2 (FEF = 5.0) and 9 (FEF = 2.0) showed a similar trend associated with a decreased K+-induced FE [8 (FEF = 2.7) > 2 (FEF = 1.5) > 9 (FEF = 1.1)]. Here, the Na+-complex stability and Na+/K+ selectivity is also influenced by the fluorophore moiety. Thus, fluorescent probe 8 (K-d = 48 mm) allows high-contrast, sensitive, and selective Na+ measurements over extracellular K+ levels. A higher Na+/K+ selectivity showed fluorescent probe 9, but also a higher Kd value of 223 mm. Therefore, 9 is a suitable tool to measure Na+ concentrations up to 300 mm at a fluorescence emission of 614 nm. KW - crown compounds KW - fluorescence KW - fluorescent probes KW - potassium KW - sodium Y1 - 2017 U6 - https://doi.org/10.1002/chem.201605986 SN - 0947-6539 SN - 1521-3765 VL - 23 SP - 7255 EP - 7263 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Meiling, Till Thomas T1 - Development of a reliable and environmentally friendly synthesis for fluorescence carbon nanodots T1 - Entwicklung einer zuverlässigen und umweltfreundlichen Synthese für fluoreszierende Kohlenstoff-Nanopunkte BT - preparation and characterisation of excellent and well-defined carbon nanodots by a fast, simple and cost-efficient synthesis method; with special focus on future exploration and large scale applications BT - Herstellung und Charakterisierung von hochwertigen und klar definierten Kohlenstoff-Nanopunkten mit Hilfe einer schnellen, einfachen, und kosteneffizienten Synthesemethode; mit speziellem Fokus auf ihre zukünftige Erforschung und breite Anwendung N2 - Carbon nanodots (CNDs) have generated considerable attention due to their promising properties, e.g. high water solubility, chemical inertness, resistance to photobleaching, high biocompatibility and ease of functionalization. These properties render them ideal for a wide range of functions, e.g. electrochemical applications, waste water treatment, (photo)catalysis, bio-imaging and bio-technology, as well as chemical sensing, and optoelectronic devices like LEDs. In particular, the ability to prepare CNDs from a wide range of accessible organic materials makes them a potential alternative for conventional organic dyes and semiconductor quantum dots (QDs) in various applications. However, current synthesis methods are typically expensive and depend on complex and time-consuming processes or severe synthesis conditions and toxic chemicals. One way to reduce overall preparation costs is the use of biological waste as starting material. Hence, natural carbon sources such as pomelo peal, egg white and egg yolk, orange juice, and even eggshells, to name a few; have been used for the preparation of CNDs. While the use of waste is desirable, especially to avoid competition with essential food production, most starting-materials lack the essential purity and structural homogeneity to obtain homogeneous carbon dots. Furthermore, most synthesis approaches reported to date require extensive purification steps and have resulted in carbon dots with heterogeneous photoluminescent properties and indefinite composition. For this reason, among others, the relationship between CND structure (e.g. size, edge shape, functional groups and overall composition) and photophysical properties is yet not fully understood. This is particularly true for carbon dots displaying selective luminescence (one of their most intriguing properties), i.e. their PL emission wavelength can be tuned by varying the excitation wavelength. In this work, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain CNDs with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch, carboxylic acids and Tris-EDTA (TE) buffer as carbon- and nitrogen source, respectively. The presented microwave-assisted hydrothermal precursor carbonization (MW-hPC) is characterized by its cost-efficiency, simplicity, short reaction times, low environmental footprint, and high yields of approx. 80% (w/w). Furthermore, only a single synthesis step is necessary to obtain homogeneous water-soluble CNDs with no need for further purification. Depending on starting materials and reaction conditions different types of CNDs have been prepared. The as-prepared CNDs exhibit reproducible, highly homogeneous and favourable PL properties with narrow emission bands (approx. 70nm FWHM), are non-blinking, and are ready to use without need for further purification, modification or surface passivation agents. Furthermore, the CNDs are comparatively small (approx. 2.0nm to 2.4nm) with narrow size distributions; are stable over a long period of time (at least one year), either in solution or as a dried solid; and maintain their PL properties when re-dispersed in solution. Depending on CND type, the PL quantum yield (PLQY) can be adjusted from as low as 1% to as high as 90%; one of the highest reported PLQY values (for CNDs) so far. An essential part of this work was the utilization of a microwave synthesis reactor, allowing various batch sizes and precise control over reaction temperature and -time, pressure, and heating- and cooling rate, while also being safe to operate at elevated reaction conditions (e.g. 230 ±C and 30 bar). The hereby-achieved high sample throughput allowed, for the first time, the thorough investigation of a wide range of synthesis parameters, providing valuable insight into the CND formation. The influence of carbon- and nitrogen source, precursor concentration and -combination, reaction time and -temperature, batch size, and post-synthesis purification steps were carefully investigated regarding their influence on the optical properties of as-synthesized CNDs. In addition, the change in photophysical properties resulting from the conversion of CND solution into solid and back into the solution was investigated. Remarkably, upon freeze-drying the initial brown CND-solution turns into a non-fluorescent white/slightly yellow to brown solid which recovers PL in aqueous solution. Selected CND samples were also subject to EDX, FTIR, NMR, PL lifetime (TCSPC), particle size (TEM), TGA and XRD analysis. Besides structural characterization, the pH- and excitation dependent PL characteristics (i.e. selective luminescence) were examined; giving inside into the origin of photophysical properties and excitation dependent behaviour of CNDs. The obtained results support the notion that for CNDs the nature of the surface states determines the PL properties and that excitation dependent behaviour is caused by the “Giant Red-Edge Excitation Shift” (GREES). N2 - Kohlenstoff-Nanopunkte (CNDs, engl. carbon nanodots) haben im letzten Jahrzehnt insbesondere durch ihre vielversprechenden Eigenschaften immer mehr an Popularität gewonnen. CNDs zeichnen sich insbesondere durch ihre Wasserlöslichkeit, hohe chemische Stabilität, Biokompatibilität, hohe Resistenz gegen Photobleichen, und die Möglichkeit zur Oberflächenfunktionalisierung aus. Diese Eigenschaften machen sie somit ideal für eine breite Palette von Anwendungen: z.B. Abwasserbehandlung, (Foto-) Katalyse, Bioimaging und Biotechnologie, chemische Sensorik, sowie elektrochemische- und optoelektronische Anwendungen (z.B. LEDs). Insbesondere die Möglichkeit, CNDs aus einer Vielzahl organischer Materialien herzustellen, machen sie zu einer möglichen Alternative für herkömmliche organische Farbstoffe und Halbleiter-Quantenpunkte (QDs). Derzeitigen Synthesestrategien erweisen sich jedoch häufig als teuer, komplex und zeitaufwändig; bzw. benötigen toxischen Chemikalien und/oder drastische Reaktionsbedingungen. Eine Möglichkeit, die Herstellungskosten von CNDs zu reduzieren, ist die Verwendung von biologischem Abfall als Ausgangsmaterial. So wurden bereits eine Vielzahl an natürlichen Kohlenstoffquellen, z.B. Pomelo-Schale, Eiweiß und Eigelb, Orangensaft und sogar Eierschalen, für die Darstellung von CNDs verwendet. Während die Verwendung von biologischem Abfall wünschenswert ist, insbesondere um Wettbewerb mit der Nahrungsmittelproduktion zu vermeiden, fehlt den meisten Ausgangsmaterialien jedoch die notwendige Reinheit und strukturelle Homogenität um einheitliche CNDs zu erhalten. So führen bisherige Syntheseansätze oft zu CNDs mit heterogenen photophysikalischen Eigenschaften und unbestimmter Zusammensetzung. Für die Untersuchung des Zusammenhangs zwischen CND Struktur und photophysikalischen Eigenschaften werden aber möglichst homogene und vergleichbare Proben benötigt. In dieser Arbeit wird daher eine neue, zuverlässige, ökonomische und umweltfreundliche Einstufen-Synthese zur Darstellung von CNDs mit klar definierten und reproduzierbaren Photolumineszenz- (PL) -Eigenschaften vorgestellt. Die vorgestellte Methode basiert auf der mikrowellenunterstützten, hydrothermischen Behandlung (MW-hPC, engl. microwaveassisted hydrothermal precursor carbonization) wässriger Lösungen aus Stärke, Carbonsäuren (als Kohlenstoffquelle) und Tris-EDTA (TE) -Puffer (als Stickstoffquelle). Die MW-hPC zeichnet sich insbesondere durch die hohe Reproduzierbarkeit, einfache Handhabung, geringen Reaktionszeiten, geringe Umweltbelastung, Kosteneffizienz und die hohen Ausbeuten von ca. 80% (w/w) aus. Darüber hinaus wird nur ein einziger Syntheseschritt (ohne weitere Aufreinigung) benötigt um homogene, wasserlösliche CNDs zu erhalten. In Abhängig der gewählten Ausgangsmaterialen und Reaktionsbedingungen können verschiedene Typen an CNDs gewonnen werden. Die so gewonnen CNDs sind verhältnismäßig klein (ca. 2.0nm- 2.4nm); besitzen eine geringe Größenverteilung, hochgradig homogenen PL-Eigenschaften, und geringen Halbwertsbreiten (FWHM) von ca. 70nm. Darüber hinaus erwiesen sie sich als nicht blinkend; sind langzeitstabil (min. ein Jahr) sowohl in Lösung als auch als Feststoff; und sind direkt gebrauchsfertig, d.h. benötigen keine weitere Aufreinigung oder Oberflächenpassivierung. In Abhängigkeit vom CND-Typ kann die PL-Quantenausbeute zwischen 1% bis 90% betragen; einer der höchsten Werte der je (für CNDs) erreicht wurde. Ein wesentlicher Bestandteil dieser Arbeit war die Verwendung eines Mikrowellensynthese- Reaktors (MiWR) und die damit einhergehende präzise Kontrolle über die Reaktionstemperatur und -zeit, den Druck, und die Heiz- und Abkühlgeschwindigkeit. Des Weiteren ermöglichte der MiWR unterschiedliche Ansatzgrößen und das sichere Arbeiten bei erhöhten Reaktionsbedingungen (z.B. 230 ±C und 30 bar). Der hierdurch erreichte hohe Probendurchsatz ermöglichte somit erstmals die sorgfältige Untersuchung einer Vielzahl an Syntheseparametern hinsichtlich ihres Einflusses auf die photophysikalischen Eigenschaften der dargestellten CNDs. Die untersuchten Parameter reichen hierbei von der Reaktionstemperatur und -zeit über die Edukt-Konzentration und -Kombination (Kohlenstoff- und Stickstoffquelle) bis hin zur Ansatzgröße. Bemerkenswerterweise, und unabhängig vom CND-Typ, transformieren die ursprünglich braunen CND-Lösungen während der Trocknung zu einem nicht fluoreszierenden, weißen/leicht gelblich bis bräunlichen Feststoff; und regenerieren ihre photophysikalischen Eigenschaften verlustfrei in wässriger Lösung. Im Rahmen dieser Arbeit wurden ausgewählte CND-Proben der EDX-, FTIR-, NMR-, TCSPC-, Partikelgrößen (TEM)-, TGA- und XRD-Analyse unterzogen. Die hierbei gewonnenen Erkenntnisse stützen die Theorie, dass die photophysikalischen Eigenschaften der CNDs durch ihre Oberflächenzustände bestimmt werden und dass die s.g. ”Riesen-Rotkanten-Anregungsverschiebung” (GREES, engl. Giant Red Edge Excitation Shift) eine mögliche Ursache für die häufig beobachtete Anregungswellenlängenabhängigkeit der Emissionswellenlänge (bzw. selektive Lumineszenz) in CNDs ist. KW - carbon dots KW - carbon nanodots KW - fluorescence KW - high quantum yield KW - microwave synthesis KW - white carbon KW - Kohlenstoff-Punkte KW - Kohlenstoff-Nanopunkte KW - Fluoreszenz KW - hohe Quantenausbeute KW - mikrowellengestützte Synthese KW - weißer Kohlenstoff Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-410160 ER - TY - THES A1 - Dippel, Sandor T1 - Development of functional hydrogels for sensor applications T1 - Entwicklung funktionalisierter Hydrogele für Sensor Anwendungen N2 - In this work, a sensor system based on thermoresponsive materials is developed by utilizing a modular approach. By synthesizing three different key monomers containing either a carboxyl, alkene or alkyne end group connected with a spacer to the methacrylic polymerizable unit, a flexible copolymerization strategy has been set up with oligo ethylene glycol methacrylates. This allows to tune the lower critical solution temperature (LCST) of the polymers in aqueous media. The molar masses are variable thanks to the excurse taken in polymerization in ionic liquids thus stretching molar masses from 25 to over 1000 kDa. The systems that were shown shown to be effective in aqueous solution could be immobilized on surfaces by copolymerizing photo crosslinkable units. The immobilized systems were formulated to give different layer thicknesses, swelling ratios and mesh sizes depending on the demand of the coupling reaction. The coupling of detector units or model molecules is approached via reactions of the click chemistry pool, and the reactions are evaluated on their efficiency under those aspects, too. These coupling reactions are followed by surface plasmon resonance spectroscopy (SPR) to judge efficiency. With these tools at hand, Salmonella saccharides could be selectively detected by SPR. Influenza viruses were detected in solution by turbidimetry in solution as well as by a copolymerized solvatochromic dye to track binding via the changes of the polymers’ fluorescence by said binding event. This effect could also be achieved by utilizing the thermoresponsive behavior. Another demonstrator consists of the detection system bound to a quartz surface, thus allowing the virus detection on a solid carrier. The experiments show the great potential of combining the concepts of thermoresponsive materials and click chemistry to develop technically simple sensors for large biomolecules and viruses. N2 - Diese Arbeit befasst sich mit der Entwicklung von Sensorsystemen für biologische Analyten wie Bakterien und Viren. Die Sensoren beruhen auf thermoresponsiven Polymeren und die Entwicklung wird Schritt für Schritt ausgehend von der Monomersynthese dargelegt. Die Grundidee ist es alle Einzelschritte so modular wie möglich zu halten. Die Kopplungseinheiten für die späteren Erkennungsgruppen bestehen aus Carboxyl, Alken und Alkinfunktionalitäten, die zuerst mit einem Ethylenglycolspacer mit variabler Länge verknüpft werden und dann mit der polymerisierbaren Methylmethacrylatgruppe versehen werden. Diese koppelbaren Monomere werden mit Di- oder (Oligoethylenglycol)methacrylaten copolymerisiert. Je nach Verhältnis ist so auch die untere kritische Entmischungstemperatur (LCST) einstellbar. Mit der Erweiterung der Polymerisationstechnik um ionische Flüssigkeiten als Lösemittel lassen sich Molmassen von 25 bis über 1000 kDa einstellen. Um die Polymere funktionell zu erweitern, lassen sich auch benzophenonhaltige Monomere zur Vernetzung oder Immobilisierung copolymerisieren. Naphthalsäureimidhaltige Monomere wiederum dienen als Signaleinheit, da sie durch Verändern der Polarität ihrer Umgebung solvatochrom reagieren. Durch Aufschleudern und UV-Vernetzen lassen sich Gelschichten mit guter Schichtdickenkontrolle herstellen. Dabei sind die Substrate nur auf den jeweiligen Zweck beschränkt. Dank des Baukastenprinzips kann auch die Maschenweite oder der Quellgrad der Gele eingestellt werden. Die Polymere oder Hydrogele werden mit Hilfe von effizienten Reaktionen swe sogenannten „Click Chemie“ umgesetzt und die Reaktionen werden durchleuchtet, ob sie diesen Ansprüchen gerecht werden. Je nach Möglichkeit wird das Anknüpfen mittels Oberflächenplasmonenresonanzspektroskopie(SPR) verfolgt, so wie zum Beispiel die Kopplung eines Phagen-Oberflächenproteins und das selektive Binden eines Membransaccharids des Salmonellen Bakteriums. Influenza Viren werden selektiv mit Hilfe eines Erkennungspeptids gebunden und mit Hilfe von Trübungsspektroskopie bzw. dem thermoresponsiven Verhalten des Trägerpolymers nachgewiesen. Ein weiterer dargelegter Ansatz ist das Nachweisen von geringen Virenkonzentrationen mit Hilfe eines Hydrogels oder von Polymeren in Lösung, die jeweils mit einem solvatochromen Farbstoff ausgestattet sind, der auf die Umgebungsänderung durch den Virus reagiert. Die Experimente zeigen das große Potential von geschickt kombinierten thermoresponsiven Materialien, die mittels Funktionalisierung durch Click-Chemie zu technisch einfachen Nachweissystemen für Biomoleküle und sogar ganze Zellen entwickelt werden können. KW - biosensors KW - polymer synthesis KW - lower critical solution temperature KW - surface modification KW - smart materials KW - Biosensoren KW - Polymersynthese KW - untere kritische Entmischungstemperatur KW - schaltbare Materialien Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398252 ER -