TY - THES A1 - Öztürk, Ugur T1 - Learning more to predict landslides T1 - Ein verbessertes Wissen zur Prognose von Hangrutschungen N2 - Landslides are frequent natural hazards in rugged terrain, when the resisting frictional force of the surface of rupture yields to the gravitational force. These forces are functions of geological and morphological factors, such as angle of internal friction, local slope gradient or curvature, which remain static over hundreds of years; whereas more dynamic triggering events, such as rainfall and earthquakes, compromise the force balance by temporarily reducing resisting forces or adding transient loads. This thesis investigates landslide distribution and orientation due to landslide triggers (e.g. rainfall) at different scales (6-4∙10^5 km^2) and aims to link rainfall movement with the landslide distribution. It additionally explores the local impacts of the extreme rainstorms on landsliding and the role of precursory stability conditions that could be induced by an earlier trigger, such as an earthquake. Extreme rainfall is a common landslide trigger. Although several studies assessed rainfall intensity and duration to study the distribution of thus triggered landslides, only a few case studies quantified spatial rainfall patterns (i.e. orographic effect). Quantifying the regional trajectories of extreme rainfall could aid predicting landslide prone regions in Japan. To this end, I combined a non-linear correlation metric, namely event synchronization, and radial statistics to assess the general pattern of extreme rainfall tracks over distances of hundreds of kilometers using satellite based rainfall estimates. Results showed that, although the increase in rainfall intensity and duration positively correlates with landslide occurrence, the trajectories of typhoons and frontal storms were insufficient to explain landslide distribution in Japan. Extreme rainfall trajectories inclined northwestwards and were concentrated along some certain locations, such as coastlines of southern Japan, which was unnoticed in the landslide distribution of about 5000 rainfall-triggered landslides. These landslides seemed to respond to the mean annual rainfall rates. Above mentioned findings suggest further investigation on a more local scale to better understand the mechanistic response of landscape to extreme rainfall in terms of landslides. On May 2016 intense rainfall struck southern Germany triggering high waters and landslides. The highest damage was reported at the Braunsbach, which is located on the tributary-mouth fan formed by the Orlacher Bach. Orlacher Bach is a ~3 km long creek that drains a catchment of about ~6 km^2. I visited this catchment in June 2016 and mapped 48 landslides along the creek. Such high landslide activity was not reported in the nearby catchments within ~3300 km^2, despite similar rainfall intensity and duration based on weather radar estimates. My hypothesis was that several landslides were triggered by rainfall-triggered flash floods that undercut hillslope toes along the Orlacher Bach. I found that morphometric features such as slope and curvature play an important role in landslide distribution on this micro scale study site (<10 km^2). In addition, the high number of landslides along the Orlacher Bach could also be boosted by accumulated damages on hillslopes due karst weathering over longer time scales. Precursory damages on hillslopes could also be induced by past triggering events that effect landscape evolution, but this interaction is hard to assess independently from the latest trigger. For example, an earthquake might influence the evolution of a landscape decades long, besides its direct impacts, such as landslides that follow the earthquake. Here I studied the consequences of the 2016 Kumamoto Earthquake (MW 7.1) that triggered some 1500 landslides in an area of ~4000 km^2 in central Kyushu, Japan. Topography, i.e. local slope and curvature, both amplified and attenuated seismic waves, thus controlling the failure mechanism of those landslides (e.g. progressive). I found that topography fails in explaining the distribution and the preferred orientation of the landslides after the earthquake; instead the landslides were concentrated around the northeast of the rupture area and faced mostly normal to the rupture plane. This preferred location of the landslides was dominated mainly by the directivity effect of the strike-slip earthquake, which is the propagation of wave energy along the fault in the rupture direction; whereas amplitude variations of the seismic radiation altered the preferred orientation. I suspect that the earthquake directivity and the asymmetry of seismic radiation damaged hillslopes at those preferred locations increasing landslide susceptibility. Hence a future weak triggering event, e.g. scattered rainfall, could further trigger landslides at those damaged hillslopes. N2 - Hangrutschungen treten häufig in steilem Gelände auf, wenn die Erdanziehungskraft die Scherkräfte an der Oberfläche übersteigt. Diese Kräfte beinhalten geologische und geomorphologische Faktoren wie den Reibungswinkel oder die Neigung und Krümmung von Hängen, die über Jahrhunderte statisch bleiben können. Dynamische Ereignisse wie Regenfälle und Erdbeben können hingegen das Kräftegleichgewicht beeinträchtigen, indem sie Widerstandskräfte vorübergehend reduzieren oder Lasten temporär hinzufügen. Diese Arbeit untersucht die Verteilung und Orientierung von Hangrutschungen in Abhängigkeit von Auslösern (z.B. Niederschlag) auf verschiedenen Skalenebenen (6-4∙10^5 km^2) und verknüpft die Bewegung des Niederschlagssystems mit der Hangrutschungsverteilung. Zudem werden lokale Auswirkungen von extremen Gewittern auf Hangrutschungen untersucht, sowie vorausgehende Stabilitätsbedingungen, die durch ein früheres Ereignis, beispielsweise ein Erdbeben, verändert werden können. Extremer Niederschlag ist ein weithin bekannter Auslöser für Hangrutschungen. Obwohl mehrere Studien die Verteilung von Hangrutschungen mit der Niederschlagsintensität und -dauer verglichen haben, beachteten nur wenige Fallstudien das räumliche Bewegungsmuster des Niederschlags, i.e. den orographischen Effekt. Eine solche Quantifizierung könnte die Vorhersage von hangrutschungsgefährdete Regionen in Japan verbessern. Hierfür habe ich ein nicht-lineares Korrelationsmaß (event synchronization) auf regionale Sturmbahnen in Japan angewendet, um deren räumliche Verteilung durch satellitengestützen Regenschätzungen nachzuvollziehen. Die durchgeführten Untersuchungen zeigten, dass sich die Verteilung von Hangrutschungen nur unzureichend mit den Zugbahnen von Taifunen und Sturmtiefen erklären lässt. Die Stabilität von Hängen scheint mehr durch mittlere Jahresniederschlagsmengen beeinflusst zu werden. Erzielte Ergebnisse zeigen, dass weitere Untersuchungen auf lokaler Ebene nötig sind, um die unmittelbare Auswirkungen von Extremniederschlägen auf Hangstabilität und -rutschungen besser zu verstehen. Im Mai 2016 kam es in Süddeutschland zu einem heftigen Gewitter, das Hochwasser und Hangrutschungen ausgelöst hat. Der höchste Schaden wurde in Braunsbach, dessen Zentrum sich am Zufluss des Orlacher Bachs befindet, gemeldet. Der Orlacher Bach ist ~3 lang und hat ein Einzugsgebiet von etwa ~6 km^2. Ich habe dieses Einzugsgebiet im Juni 2016 besucht und 48 Hangrutschungen entlang des Baches kartiert. Ich vermutete, dass mehrere Hangrutschungen durch Sturzfluten ausgelöst wurden, welche die Hänge entlang des Orlacher Baches unterspülten. Ich stellte fest, dass morphometrische Merkmale wie die lokale Hangneigung und -krümmung eine wichtige Rolle bei der Hangrutschungsverteilung auf dieser Mikroskala spielen (<10 km^2). Darüber hinaus könnte die hohe Anzahl von Hangrutschungen am Orlacher Bach auch durch Karstverwitterung über längere Zeiträume verstärkt werden. Zahlreiche in der Vergangenheit liegende Ereignisse können die Stabilität eines Hanges beeinflussen. Der Einfluss solcher Ereignisse ist nur sehr schwer unabhängig voneinander abschätzbar. Beispielseise könnte ein Erdbeben die Entwicklung einer Landschaft über Jahrzehnte hin beeinflussen. Hier erforsche ich die Folgen des Kumamoto-Erdbebens 2016 (MW 7.1) das im Zentrum von Kyushu, Japan, ca. 1500 Hangrutschungen in einem Gebiet von ~4000 km^2 ausgelöst hat. Die Topographie (Hangneigung und -krümmung) verstärkte schwächte seismische Wellen gleichermaßen ab, wodurch der Auslösemechanismus dieser Hangrutschungen (z.B. progressiv) gesteuert wird. Ich konnte belegen, dass die Topographie die Verteilung und die bevorzugte Ausrichtung der Hangrutsche nach dem Erdbeben nicht erklären kann; stattdessen waren die Hangrutschungen um den Nordosten des Bruchgebiets herum konzentriert und standen meist senkrecht zur Bruchfläche. Diese bevorzugte Lage der Erdrutsche wurde hauptsächlich durch den Richtwirkungseffekt des Blattverschiebung-Erdbebens dominiert. Bei diesem handelt es sich um die Ausbreitung der Wellenenergie entlang des Bruches in Bruchrichtung, während Amplitudenvariationen der seismischen Strahlung die bevorzugte Orientierung ändern. Ich vermute, dass die Richtwirkung des Erdbebens und die Asymmetrie der seismischen Strahlung die Hangneigung an diesen bevorzugten Stellen schädigten und die Anfälligkeit für Hangrutschungen erhöhten. Daher könnte ein zukünftiges schwaches Ereignis wie z.B. ein unbedeutender Niederschlag an diesen beschädigten Hängen weitere Hangrutschungen auslösen. KW - landslides KW - complex networks KW - event synchronization KW - typhoons KW - Kumamoto earthquake KW - Braunsbach flash flood KW - Hangrutschungen KW - komplexes Netzwerk KW - Synchronisation von Ereignissen KW - Taifune KW - Kumamoto Erdbeben KW - Braunsbach Sturzflut Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426439 ER - TY - THES A1 - Zuhr, Alexandra T1 - Proxy signal formation in palaeoclimate archives T1 - Proxy-Signalbildung in Paläoklimaarchiven BT - a characterisation of climate signal deposition and modification in marine sediments and polar ice BT - eine Charakterisierung der Ablagerung und Veränderung von Klimasignalen in Meeressedimenten und Polarem Ei N2 - Throughout the last ~3 million years, the Earth's climate system was characterised by cycles of glacial and interglacial periods. The current warm period, the Holocene, is comparably stable and stands out from this long-term cyclicality. However, since the industrial revolution, the climate has been increasingly affected by a human-induced increase in greenhouse gas concentrations. While instrumental observations are used to describe changes over the past ~200 years, indirect observations via proxy data are the main source of information beyond this instrumental era. These data are indicators of past climatic conditions, stored in palaeoclimate archives around the Earth. The proxy signal is affected by processes independent of the prevailing climatic conditions. In particular, for sedimentary archives such as marine sediments and polar ice sheets, material may be redistributed during or after the initial deposition and subsequent formation of the archive. This leads to noise in the records challenging reliable reconstructions on local or short time scales. This dissertation characterises the initial deposition of the climatic signal and quantifies the resulting archive-internal heterogeneity and its influence on the observed proxy signal to improve the representativity and interpretation of climate reconstructions from marine sediments and ice cores. To this end, the horizontal and vertical variation in radiocarbon content of a box-core from the South China Sea is investigated. The three-dimensional resolution is used to quantify the true uncertainty in radiocarbon age estimates from planktonic foraminifera with an extensive sampling scheme, including different sample volumes and replicated measurements of batches of small and large numbers of specimen. An assessment on the variability stemming from sediment mixing by benthic organisms reveals strong internal heterogeneity. Hence, sediment mixing leads to substantial time uncertainty of proxy-based reconstructions with error terms two to five times larger than previously assumed. A second three-dimensional analysis of the upper snowpack provides insights into the heterogeneous signal deposition and imprint in snow and firn. A new study design which combines a structure-from-motion photogrammetry approach with two-dimensional isotopic data is performed at a study site in the accumulation zone of the Greenland Ice Sheet. The photogrammetry method reveals an intermittent character of snowfall, a layer-wise snow deposition with substantial contributions by wind-driven erosion and redistribution to the final spatially variable accumulation and illustrated the evolution of stratigraphic noise at the surface. The isotopic data show the preservation of stratigraphic noise within the upper firn column, leading to a spatially variable climate signal imprint and heterogeneous layer thicknesses. Additional post-depositional modifications due to snow-air exchange are also investigated, but without a conclusive quantification of the contribution to the final isotopic signature. Finally, this characterisation and quantification of the complex signal formation in marine sediments and polar ice contributes to a better understanding of the signal content in proxy data which is needed to assess the natural climate variability during the Holocene. N2 - Während der letzten ~3 Millionen Jahre war das Klimasystem der Erde durch Zyklen von Glazialen und Interglazialen gekennzeichnet. Die aktuelle Warmperiode, das Holozän, ist vergleichsweise stabil und hebt sich von dieser langen Zyklizität ab. Seit der industriellen Revolution wird das Klima jedoch zunehmend durch einen vom Menschen verursachten Anstieg der Treibhausgaskonzentrationen beeinflusst. Während instrumentelle Beobachtungen die Veränderungen der letzten ~200 Jahre beschreiben können, liefern Proxydaten die meisten klimatischen Informationen für den Zeitraum vor diesen Beobachtungen. Proxies zeichnen vergangene Klimabedingungen auf und sind in Paläoklimaarchiven rund um die Erde gespeichert. Das Proxysignal wird durch eine Vielzahl an Prozessen beeinflusst, die unabhängig von den vorherrschenden klimatischen Bedingungen sind. Insbesondere bei sedimentären Archiven wie Meeressedimenten und Eisschilden kann es während oder nach der Ablagerung zu einer Umverteilung des Materials und einer Änderung des Signals kommen. Dies führt zu nicht-klimatischen Unsicherheiten in den Daten, was zuverlässige Rekonstruktionen auf lokalen oder kurzen zeitlichen Skalen erschwert. Diese Dissertation charakterisiert die Ablagerung des Klimasignals und quantifiziert die daraus resultierende archiv-interne Heterogenität und ihren Einfluss auf das beobachtete Proxysignal, um die Repräsentativität und Interpretation von Klimarekonstruktionen aus marinen Sedimenten und Eiskernen zu verbessern. Zu diesem Zweck wird die horizontale und vertikale Variabilität des Radiokarbongehalts in einem Sedimentkern aus dem Südchinesischen Meer untersucht. Die dreidimensionale Auflösung des Kastenbohrers wird genutzt, um die tatsächliche Unsicherheit in Alterabschätzung von planktonische Foraminiferen mittels der Radiokarbonmethode zu quantifizieren. Mit Hilfe von verschiedene Probenvolumina und wiederholten Messungen von kleinen und großen Anzahlen an Lebewesen wird eine Quantifizierung der Variabilität, die auf die Durchmischung des Sediments durch benthische Organismen zurückzuführen ist, durchgeführt. Die Durchmischung der Sedimente verursacht eine starke interne Heterogenität, was zu Fehlertermen, die zwei bis fünf Mal größer sind als bisher angenommen, und einer erheblichen zeitlichen Unsicherheit von Rekonstruktionen basierend auf Proxydaten führt. Eine zweite dreidimensionale Analyse liefert Einblicke in die heterogene Signalablagerung in Schnee und Firn. Hierzu wird ein neues Studiendesign in der Akkumulationszone des grönländischen Eisschilds angewandt, wobei ein Structure-from-Motion Photogrammetrie Ansatz mit zweidimensionalen Isotopendaten kombiniert wird. Die photogrammetrische Methode zeigt, dass die Akkumulation von Schnee sehr variable ist. Die Entwicklung der Schneeablagerung an der Oberfläche erfolgt primär schichtweise mit erheblichen Veränderungen durch eine windgestriebene Erosion und Umverteilung des Schnees. Diese Dynamik führt zu einer räumlich variablen Akkumulation und sratigraphischem Rauschens an der Oberfläche. Die heterogene Akkumulation bestimmt die räumliche Ablagerung der klimatischen Informationen, die in der Isotopenzusammensetzung des Schness enthalten ist. Stratigraphische Rauschen der Oberfläche bleibt in der oberen Firnsäule erhalten, was zu einem räumlich variablen Signaleindruck führt. Weiterhin werden zusätzliche Veränderungen nach der Ablagerung durch Austauschprozesse zwischen dem Schnee und der Atmosphäre untersucht, jedoch ohne eine schlüssige Quantifizierung dieses Beitrags zur endgültigen Isotopensignatur. Die Charakterisierung und Quantifizierung der komplexen und heterogenen Signalbildung in marinen Sedimenten und Gletschereis verbessert letztlich das Verständnis des Signalgehalts in Proxydaten und trägt dazu bei, die natürliche Klimavariabilität des Holozäns besser abzuschätzen. KW - polar ice KW - marine sediments KW - palaeoclimatology KW - signal formation KW - climatolgoy KW - Klimatologie KW - Meeressedimente KW - Paläoklimatologie KW - polares Eis KW - Signalbildung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-582864 ER - TY - THES A1 - Zorn, Edgar Ulrich T1 - Monitoring lava dome growth and deformation with photogrammetric methods and modelling N2 - Lava domes are severely hazardous, mound-shaped extrusions of highly viscous lava and commonly erupt at many active stratovolcanoes around the world. Due to gradual growth and flank oversteepening, such lava domes regularly experience partial or full collapses, resulting in destructive and far-reaching pyroclastic density currents. They are also associated with cyclic explosive activity as the complex interplay of cooling, degassing, and solidification of dome lavas regularly causes gas pressurizations on the dome or the underlying volcano conduit. Lava dome extrusions can last from days to decades, further highlighting the need for accurate and reliable monitoring data. This thesis aims to improve our understanding of lava dome processes and to contribute to the monitoring and prediction of hazards posed by these domes. The recent rise and sophistication of photogrammetric techniques allows for the extraction of observational data in unprecedented detail and creates ideal tools for accomplishing this purpose. Here, I study natural lava dome extrusions as well as laboratory-based analogue models of lava dome extrusions and employ photogrammetric monitoring by Structure-from-Motion (SfM) and Particle-Image-Velocimetry (PIV) techniques. I primarily use aerial photography data obtained by helicopter, airplanes, Unoccupied Aircraft Systems (UAS) or ground-based timelapse cameras. Firstly, by combining a long time-series of overflight data at Volcán de Colima, México, with seismic and satellite radar data, I construct a detailed timeline of lava dome and crater evolution. Using numerical model, the impact of the extrusion on dome morphology and loading stress is further evaluated and an impact on the growth direction is identified, bearing important implications for the location of collapse hazards. Secondly, sequential overflight surveys at the Santiaguito lava dome, Guatemala, reveal surface motion data in high detail. I quantify the growth of the lava dome and the movement of a lava flow, showing complex motions that occur on different timescales and I provide insight into rock properties relevant for hazard assessment inferred purely by photogrammetric processing of remote sensing data. Lastly, I recreate artificial lava dome and spine growth using analogue modelling under controlled conditions, providing new insights into lava extrusion processes and structures as well as the conditions in which they form. These findings demonstrate the capabilities of photogrammetric data analyses to successfully monitor lava dome growth and evolution while highlighting the advantages of complementary modelling methods to explain the observed phenomena. The results presented herein further bear important new insights and implications for the hazards posed by lava domes. N2 - Lavadome sind kuppelförmige Aufstauungen aus zähflüssiger Lava und bilden sich häufig bei Eruptionen an aktiven Stratovulkanen. Sie stellen dabei oft eine erhebliche Gefahr für Menschen und Infrastruktur dar, weil Lavadome instabil werden können und bei einem Kollaps pyroklastische Ströme (auch Glutlawinen) erzeugen können. Diese können innerhalb von Minuten weite Flächen verwüsten, daher ist die Überwachung von Lavadomen und deren Wachstum mit genauen und zuverlässigen Daten von großer Bedeutung. In dieser Arbeit werden das Wachstum und die Bewegungen von Lavadomen mit fotogrammetrischen Methoden (Vermessungen anhand von Fotos) und mit Modellierungen in drei Teilstudien getestet und untersucht. Dazu wurden Daten sowohl an Lavadomen von Vulkanen in Mexiko und Guatemala als auch mittels künstlich erzeugter Dome im Labor erhoben. Hierbei wurden insbesondere das Structure-from-Motion-Verfahren, bei dem mithilfe einer Serie von Luftaufnahmen ein hochauflösendes 3D-Modell des Lavadoms und des Vulkans erstellt wird, und das Particle-Image-Velocimetry-Verfahren, bei dem aus einer Zeitreihe von Fotos kleinste Bewegungen detailliert gemessen werden können, verwendet. In der ersten Teilstudie wird aus einer Kombination von Überflugsbildern, Radardaten eines Satelliten, und seismischen Daten eine detaillierte Zeitreihe des Lavadom-Wachstums und der Kraterentwickelung am Volcán de Colima, Méxiko, erstellt. Anschließend werden die dabei erfassten Richtungen des Domwachstums mit numerischen Modellen auf Basis der fotogrammetrischen 3D-Modelle simuliert, welche zeigen, dass sich lokale Änderungen der Topografie auf die Wachstumsrichtung auswirken können. In der zweiten Teilstudie werden Drohnen in verschiedenen Zeitintervallen über einen Lavadom am Santa Maria Vulkan, Guatemala, geflogen. Die Überflugsdaten zeigen dabei Bewegungen sowohl an einem Lavastrom als auch ein Anschwellen des Doms mit jeweils unterschiedlichen Geschwindigkeiten. Ferner können die Daten genutzt werden um Oberflächentemperatur und die Viskosität (Zähflüssigkeit) der Lava zu vermessen, welche für die Gefahrenanalyse eine wichtige Rolle spielen. In der dritten Teilstudie werden künstliche Dom-Modelle mithilfe von Sand-Gips-Gemischen erzeugt. Diese können sowohl den Aufbau und Morphologie als auch die internen Strukturen von Lavadomen simulieren und anhand von Zeitraffer-Aufnahmen im Detail nachstellen. Die Ergebnisse zeigen, dass Fotogrammetrie und Modellierungen geeignete Mittel sind um Lavadome sowie deren Entstehungsprozesse und Gefahren zu verfolgen und neue Erkenntnisse zu gewinnen. T2 - Überwachung von Wachstum und Deformation an Lavadomen mit fotogrammetrischen Methoden und Modellierungen KW - Lava dome KW - Lavadom KW - Photogrammetry KW - Fotogrammetrie KW - Volcano KW - Vulkan KW - Analogue Model KW - Analogmodell Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-483600 ER - TY - THES A1 - Ziegler, Moritz O. T1 - The 3D in-situ stress field and its changes in geothermal reservoirs T1 - Das 3D in-situ Spannungsfeld und seine Änderungen in Geothermiereservoiren N2 - Information on the contemporary in-situ stress state of the earth’s crust is essential for geotechnical applications and physics-based seismic hazard assessment. Yet, stress data records for a data point are incomplete and their availability is usually not dense enough to allow conclusive statements. This demands a thorough examination of the in-situ stress field which is achieved by 3D geomechanicalnumerical models. However, the models spatial resolution is limited and the resulting local stress state is subject to large uncertainties that confine the significance of the findings. In addition, temporal variations of the in-situ stress field are naturally or anthropogenically induced. In my thesis I address these challenges in three manuscripts that investigate (1) the current crustal stress field orientation, (2) the 3D geomechanical-numerical modelling of the in-situ stress state, and (3) the phenomenon of injection induced temporal stress tensor rotations. In the first manuscript I present the first comprehensive stress data compilation of Iceland with 495 data records. Therefore, I analysed image logs from 57 boreholes in Iceland for indicators of the orientation of the maximum horizontal stress component. The study is the first stress survey from different kinds of stress indicators in a geologically very young and tectonically active area of an onshore spreading ridge. It reveals a distinct stress field with a depth independent stress orientation even very close to the spreading centre. In the second manuscript I present a calibrated 3D geomechanical-numerical modelling approach of the in-situ stress state of the Bavarian Molasse Basin that investigates the regional (70x70x10km³) and local (10x10x10km³) stress state. To link these two models I develop a multi-stage modelling approach that provides a reliable and efficient method to derive from the larger scale model initial and boundary conditions for the smaller scale model. Furthermore, I quantify the uncertainties in the models results which are inherent to geomechanical-numerical modelling in general and the multi-stage approach in particular. I show that the significance of the models results is mainly reduced due to the uncertainties in the material properties and the low number of available stress magnitude data records for calibration. In the third manuscript I investigate the phenomenon of injection induced temporal stress tensor rotation and its controlling factors. I conduct a sensitivity study with a 3D generic thermo-hydro-mechanical model. I show that the key control factors for the stress tensor rotation are the permeability as the decisive factor, the injection rate, and the initial differential stress. In particular for enhanced geothermal systems with a low permeability large rotations of the stress tensor are indicated. According to these findings the estimation of the initial differential stress in a reservoir is possible provided the permeability is known and the angle of stress rotation is observed. I propose that the stress tensor rotations can be a key factor in terms of the potential for induced seismicity on pre-existing faults due to the reorientation of the stress field that changes the optimal orientation of faults. N2 - Kenntnis des derzeitigen in-situ Spannungszustandes der Erdkruste ist essenziell für geotechnische Anwendungen und seismische Gefährdungsabschätzungen, welche auf physikalischen Beobachtungen basieren. Jedoch sind die Spannungsinformationen jedes Datenpunktes unvollständig und die Menge an vorhandenen Datenpunkten ist normalerweise nicht groß genug, um schlüssige Ergebnisse zu erzielen. Daher ist eine eingehende Untersuchung des in-situ Spannungsfeldes, welche durch 3D geomechanisch-numerische Modellierung geleistet wird, erforderlich. Jedoch ist die räumliche Auflösung der Modelle begrenzt und der resultierende Spannungszustand ist großen Unsicherheiten unterworfen, welche die Aussagekraft der Ergebnisse beschränken. Zusätzlich gibt es zeitliche Änderungen des Spannungsfeldes, welche durch natürliche Prozesse bedingt oder menschengemacht sind. In meiner Dissertation behandle ich diese Herausforderungen in drei Manuskripten, welche (1) die Orientierung des derzeitigen Spannungszustandes, (2) die 3D geomechanisch-numerische Modellierung des in-situ Spannungszustandes und (3) das Phänomen injektionsinduzierter zeitlicher Rotationen des Spannungstensors zum Thema haben. In dem ersten Manuskript präsentiere ich die erste umfassende Spannungsdatensammlung von Island mit insgesamt 495 Einträgen. Dafür habe ich Bilddatenlogs aus 57 Bohrlöchern in Island auf Indikatoren der maximalen horizontalen Spannungsorientierung hin untersucht. Diese Studie ist die erste ganzheitliche Spannungsuntersuchung, welche sich auf verschiedene Indikatoren der Spannungsorientierung stützt und in einem geologisch sehr jungen und tektonisch aktiven Gebiet auf einem Mittelozeanischen Rücken an Land liegt. Es zeigt sich, dass selbst sehr nahe an der Plattengrenze eine tiefenunabhängige, eindeutige Spannungsorientierung existiert. In dem zweiten Manuskript präsentiere ich einen kalibrierten 3D geomechanisch-numerischen Modellierungsansatz des in-situ Spannungszustandes des bayrischen Molassebeckens welches den regionalen (70x70x10km³) und den lokalen (10x10x10km³) Spannungszustand untersucht. Um diese zwei Modelle zu verbinden, habe ich ein mehrstufigen Modellansatz entworfen, welcher eine zuverlässige und effiziente Methode darstellt um Randbedingungen und Initialbedingungen für das kleinere Modell aus dem größeren Modell abzuleiten. Des Weiteren quantifiziere ich die Unsicherheiten in den Modellergebnissen, welche im Allgemeinen durch geomechanisch-numerische Modellierung und im Speziellen durch den Mehrstufenansatz entstehen. Ich zeige, dass die Signifikanz der Modellergebnisse hauptsächlich durch die Unsicherheiten in den Materialeigenschaften sowie der geringen Anzahl vorhandener Spannungsmagnitudendaten zur Kalibrierung reduziert wird. In dem dritten Manuskript untersuche ich das Phänomen injektionsinduzierter zeitlicher Rotationen des Spannungstensors und deren kontrollierende Parameter. Ich führe eine Sensitivitätsanalyse mit einem generischen 3D thermo-hydro-mechanischen Modell durch. Darin zeige ich, dass die Schlüsselparameter, welche die Rotationen des Spannungstensors kontrollieren, die Permeabilität des Reservoirgesteins als der entscheidende Faktor, die Injektionsrate und die initiale Differenzspannung sind. Insbesondere für geothermische Systeme nach dem Hot-Dry-Rock-Verfahren mit einer geringen Permeabilität weisen die Ergebnisse auf große Rotationen des Spannungstensors hin. Gemäß diesen Ergebnissen kann die initiale Differenzspannung in einem Reservoir abgeschätzt werden, sollte die Permeabilität bekannt sein und der Winkel der Spannungsrotation beobachtet werden. Ich schlage vor, dass Spannungsrotationen ein Schlüsselfaktor in Bezug auf das Potenzial für induzierte Seismizität sind, welche auf prä-existierenden Störungen entsteht, die durch die Reorientierung des Spannungsfeldes optimal orientiert werden. KW - stress KW - stress changes KW - induced seismicity KW - geothermal KW - geomechanical modelling KW - Spannung KW - Spannungsänderungen KW - induzierte Seismizität KW - Geothermie KW - geomechanische Modellierung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-403838 ER - TY - THES A1 - Zhou, Bin T1 - On the assessment of surface urban heat island T1 - Bewertung des urbanen Hitzeinseleffekts BT - size, urban form, and seasonality BT - Stadtgröße, Stadtform, und Seasonalität N2 - Inwiefern Städte unter den Megatrends der Urbanisierung und des Klimawandels nachhaltig gestaltet werden können, bleibt umstritten. Dies ist zum Teil auf unzureichende Kenntnisse der Mensch-Umwelt-Interaktionen zurückzuführen. Als die am vollständigsten dokumentierte anthropogene Klimamodifikation ruft der Urbane Hitzeinsel (UHI) Effekt weltweit Sorgen hinsichtlich der Gesundheit der Bevölkerung hervor. Dazu kommt noch ein immer häufigeres und intensiveres Auftreten von Hitzewellen, wodurch das Wohlbefinden der Stadtbewohner weiter beeinträchtigt wird. Trotz eines deutlichen Anstiegs der Zahl der UHI-bezogenen Veröffentlichungen in den letzten Jahrzehnten haben die unterschiedlichen Definitionen von städtischen und ländlichen Gebieten in bisherigen Studien die allgemeine Vergleichbarkeit der Resultate stark erschwert. Darüber hinaus haben nur wenige Studien den UHI-Effekt und seine Einflussfaktoren anhand einer Kombination der Landnutzungsdaten und der thermischen Fernerkundung systematisch untersucht. Diese Arbeit stellt einen allgemeinen Rahmen zur Quantifizierung von UHI-Intensitäten mittels eines automatisierten Algorithmus vor, wobei Städte als Agglomerationen maximal räumlicher Kontinuität basierend auf Landnutzungsdaten identifiziert, sowie deren ländliche Umfelder analog definiert werden. Durch Verknüpfung der Landnutzungsdaten mit Landoberflächentemperaturen von Satelliten kann die UHI-Intensität robust und konsistent berechnet werden. Anhand dieser Innovation wurde nicht nur der Zusammenhang zwischen Stadtgröße und UHI-Intensität erneut untersucht, sondern auch die Auswirkungen der Stadtform auf die UHI-Intensität quantifiziert. Diese Arbeit leistet vielfältige Beiträge zum tieferen Verständnis des UHI-Phänomens. Erstens wurde eine log-lineare Beziehung zwischen UHI-Intensität und Stadtgröße unter Berücksichtigung der 5,000 europäischen Städte bestätigt. Werden kleinere Städte auch berücksichtigt, ergibt sich eine log-logistische Beziehung. Zweitens besteht ein komplexes Zusammenspiel zwischen der Stadtform und der UHI-Intensität: die Stadtgröße stellt den stärksten Einfluss auf die UHI-Intensität dar, gefolgt von der fraktalen Dimension und der Anisometrie. Allerdings zeigen ihre relativen Beiträge zur UHI-Intensität eine regionale Heterogenität, welche die Bedeutung räumlicher Muster während der Umsetzung von UHI-Anpassungsmaßnahmen hervorhebt. Des Weiteren ergibt sich eine neue Saisonalität der UHI-Intensität für individuelle Städte in Form von Hysteresekurven, die eine Phasenverschiebung zwischen den Zeitreihen der UHI-Intensität und der Hintergrundtemperatur andeutet. Diese Saisonalität wurde anhand von Luft- und Landoberflächentemperaturen untersucht, indem die Satellitenbeobachtung und die Modellierung der urbanen Grenzschicht mittels des UrbClim-Modells kombiniert wurden. Am Beispiel von London ist die Diskrepanz der Saisonalitäten zwischen den beiden Temperaturen vor allem auf die mit der einfallenden Sonnenstrahlung verbundene Besonderheit der Landoberflächentemperatur zurückzuführen. Darüber hinaus spielt das regionale Klima eine wichtige Rolle bei der Entwicklung der UHI. Diese Arbeit ist eine der ersten Studien dieser Art, die eine systematische und statistische Untersuchung des UHI-Effektes ermöglicht. Die Ergebnisse sind von besonderer Bedeutung für die allgemeine räumliche Planung und Regulierung auf Meso- und Makroebenen, damit sich Vorteile der rapiden Urbanisierung nutzbar machen und zeitgleich die folgende Hitzebelastung proaktiv vermindern lassen. N2 - To what extent cities can be made sustainable under the mega-trends of urbanization and climate change remains a matter of unresolved scientific debate. Our inability in answering this question lies partly in the deficient knowledge regarding pivotal humanenvironment interactions. Regarded as the most well documented anthropogenic climate modification, the urban heat island (UHI) effect – the warmth of urban areas relative to the rural hinterland – has raised great public health concerns globally. Worse still, heat waves are being observed and are projected to increase in both frequency and intensity, which further impairs the well-being of urban dwellers. Albeit with a substantial increase in the number of publications on UHI in the recent decades, the diverse urban-rural definitions applied in previous studies have remarkably hampered the general comparability of results achieved. In addition, few studies have attempted to synergize the land use data and thermal remote sensing to systematically assess UHI and its contributing factors. Given these research gaps, this work presents a general framework to systematically quantify the UHI effect based on an automated algorithm, whereby cities are defined as clusters of maximum spatial continuity on the basis of land use data, with their rural hinterland being defined analogously. By combining land use data with spatially explicit surface skin temperatures from satellites, the surface UHI intensity can be calculated in a consistent and robust manner. This facilitates monitoring, benchmarking, and categorizing UHI intensities for cities across scales. In light of this innovation, the relationship between city size and UHI intensity has been investigated, as well as the contributions of urban form indicators to the UHI intensity. This work delivers manifold contributions to the understanding of the UHI, which have complemented and advanced a number of previous studies. Firstly, a log-linear relationship between surface UHI intensity and city size has been confirmed among the 5,000 European cities. The relationship can be extended to a log-logistic one, when taking a wider range of small-sized cities into account. Secondly, this work reveals a complex interplay between UHI intensity and urban form. City size is found to have the strongest influence on the UHI intensity, followed by the fractality and the anisometry. However, their relative contributions to the surface UHI intensity depict a pronounced regional heterogeneity, indicating the importance of considering spatial patterns of UHI while implementing UHI adaptation measures. Lastly, this work presents a novel seasonality of the UHI intensity for individual clusters in the form of hysteresis-like curves, implying a phase shift between the time series of UHI intensity and background temperatures. Combining satellite observation and urban boundary layer simulation, the seasonal variations of UHI are assessed from both screen and skin levels. Taking London as an example, this work ascribes the discrepancies between the seasonality observed at different levels mainly to the peculiarities of surface skin temperatures associated with the incoming solar radiation. In addition, the efforts in classifying cities according to their UHI characteristics highlight the important role of regional climates in determining the UHI. This work serves as one of the first studies conducted to systematically and statistically scrutinize the UHI. The outcomes of this work are of particular relevance for the overall spatial planning and regulation at meso- and macro levels in order to harness the benefits of rapid urbanization, while proactively minimizing its ensuing thermal stress. KW - urban heat island effect KW - surface urban heat island effect KW - UHI KW - urban form KW - der Urbane Hitzeinsel Effekt KW - der Städtische Wärmeinseleffekt KW - der Urbane Hitzeinsel Effekt basierend auf Landoberflächentemperatur KW - UHI KW - die Stadtform Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-404383 ER - TY - CHAP A1 - Zeilinger, Gerold A1 - Mutti, Maria A1 - Strecker, Manfred A1 - Rehak, Katrin A1 - Bookhagen, Bodo A1 - Schwab, Marco T1 - Integration of digital elevation models and satellite images to investigate geological processes. N2 - In order to better understand the geological boundary conditions for ongoing or past surface processes geologists face two important questions: 1) How can we gain additional knowledge about geological processes by analyzing digital elevation models (DEM) and satellite images and 2) Do these efforts present a viable approach for more efficient research. Here, we will present case studies at a variety of scales and levels of resolution to illustrate how we can substantially complement and enhance classical geological approaches with remote sensing techniques. Commonly, satellite and DEM based studies are being used in a first step of assessing areas of geologic interest. While in the past the analysis of satellite imagery (e.g. Landsat TM) and aerial photographs was carried out to characterize the regional geologic characteristics, particularly structure and lithology, geologists have increasingly ventured into a process-oriented approach. This entails assessing structures and geomorphic features with a concept that includes active tectonics or tectonic activity on time scales relevant to humans. In addition, these efforts involve analyzing and quantifying the processes acting at the surface by integrating different remote sensing and topographic data (e.g. SRTM-DEM, SSM/I, GPS, Landsat 7 ETM, Aster, Ikonos…). A combined structural and geomorphic study in the hyperarid Atacama desert demonstrates the use of satellite and digital elevation data for assessing geological structures formed by long-term (millions of years) feedback mechanisms between erosion and crustal bending (Zeilinger et al., 2005). The medium-term change of landscapes during hundred thousands to millions years in a more humid setting is shown in an example from southern Chile. Based on an analysis of rivers/watersheds combined with landscapes parameterization by using digital elevation models, the geomorphic evolution and change in drainage pattern in the coastal Cordillera can be quantified and put into the context of seismotectonic segmentation of a tectonically active region. This has far-reaching implications for earthquake rupture scenarios and hazard mitigation (K. Rehak, see poster on IMAF Workshop). Two examples illustrate short-term processes on decadal, centennial and millennial time scales: One study uses orogen scale precipitation gradients derived from remotely sensed passive microwave data (Bookhagen et al., 2005a). They demonstrate how debris flows were triggered as a response of slopes to abnormally strong rainfall in the interior parts of the Himalaya during intensified monsoons. The area of the orogen that receives high amounts of precipitation during intensified monsoons also constitutes numerous landslide deposits of up to 1km3 volume that were generated during intensified monsoon phase at about 27 and 9 ka (Bookhagen et al., 2005b). Another project in the Swiss Alps compared sets of aerial photographs recorded in different years. By calculating high resolution surfaces the mass transport in a landslide could be reconstructed (M. Schwab, Universität Bern). All these examples, although representing only a short and limited selection of projects using remote sense data in geology, have as a common approach the goal to quantify geological processes. With increasing data resolution and new sensors future projects will even enable us to recognize more patterns and / or structures indicative of geological processes in tectonically active areas. This is crucial for the analysis of natural hazards like earthquakes, tsunamis and landslides, as well as those hazards that are related to climatic variability. The integration of remotely sensed data at different spatial and temporal scales with field observations becomes increasingly important. Many of presently highly populated places and increasingly utilized regions are subject to significant environmental pressure and often constitute areas of concentrated economic value. Combined remote sensing and ground-truthing in these regions is particularly important as geologic, seismicity and hydrologic data may be limited here due to the recency of infrastructural development. Monitoring ongoing processes and evaluating the remotely sensed data in terms of recurrence of events will greatly enhance our ability to assess and mitigate natural hazards.
Dokument 1: Foliensatz | Dokument 2: Abstract
Interdisziplinäres Zentrum für Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7063 ER - TY - GEN A1 - Zeeden, Christian A1 - Obreht, Igor A1 - Veres, Daniel A1 - Kaboth-Bahr, Stefanie A1 - Hošek, Jan A1 - Marković, Slobodan B. A1 - Bösken, Janina A1 - Lehmkuhl, Frank A1 - Rolf, Christian A1 - Hambach, Ulrich T1 - Smoothed millennial-scale palaeoclimatic reference data as unconventional comparison targets: Application to European loess records T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Millennial-scale palaeoclimate variability has been documented in various terrestrial and marine palaeoclimate proxy records throughout the Northern Hemisphere for the last glacial cycle. Its clear expression and rapid shifts between different states of climate (Greenland Interstadials and Stadials) represents a correlation tool beyond the resolution of e.g. luminescence dating, especially relevant for terrestrial deposits. Usually, comparison of terrestrial proxy datasets and the Greenland ice cores indicates a complex expression of millennial-scale climate variability as recorded in terrestrial geoarchives including loess. Loess is the most widespread terrestrial geoarchive of the Quaternary and especially widespread over Eurasia. However, loess often records a smoothed representation of millennial-scale variability without all fidelity when compared to the Greenland data, this being a relevant limiting feature in integrating loess with other palaeoclimate records. To better understand the loess proxy-response to millennial-scale climate variability, we simulate a proxy signal smoothing by natural processes through application of low-pass filters of delta O-18 data from Greenland, a high-resolution palaeoclimate reference record, alongside speleothem isotope records from the Black Sea-Mediterranean region. We show that low-pass filters represent rather simple models for better constraining the expression of millennial-scale climate variability in low sedimentation environments, and in sediments where proxy-response signals are most likely affected by natural smoothing (by e.g. bioturbation). Interestingly, smoothed datasets from Greenland and the Black Sea-Mediterranean region are most similar in the last similar to 15 ka and between similar to 50-30 ka. Between similar to 30-15 ka, roughly corresponding to the Last Glacial Maximum and the deglaciation, the records show dissimilarities, challenging the construction of robust correlative time-scales in this age range. From our analysis it becomes apparent that patterns of palaeoclimate signals in loess-palaeosol sequences often might be better explained by smoothed Greenland reference data than the original high-resolution Greenland dataset, or other reference data. This opens the possibility to better assess the temporal resolution and palaeoclimate potential of loess-palaeosol sequences in recording supra-regional climate patterns, as well as to securely integrate loess with other chronologically better-resolved palaeoclimate records. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1187 KW - last glacial period KW - Western Interior Basin KW - high-resolution record KW - Greenland ice cores KW - paleosol sequence KW - time-scale KW - Chinese loess KW - astronomical calibration KW - chronology (AICC2012) KW - Antarctic ice Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-524271 SN - 1866-8372 IS - 1 ER - TY - THES A1 - Zeckra, Martin T1 - Seismological and seismotectonic analysis of the northwestern Argentine Central Andean foreland N2 - After a severe M W 5.7 earthquake on October 17, 2015 in El Galpón in the province of Salta NW Argentina, I installed a local seismological network around the estimated epicenter. The network covered an area characterized by inherited Cretaceous normal faults and neotectonic faults with unknown recurrence intervals, some of which may have been reactivated normal faults. The 13 three-component seismic stations recorded data continuously for 15 months. The 2015 earthquake took place in the Santa Bárbara System of the Andean foreland, at about 17km depth. This region is the easternmost morphostructural region of the central Andes. As a part of the broken foreland, it is bounded to the north by the Subandes fold-and-thrust belt and the Sierras Pampeanas to the south; to the east lies the Chaco-Paraná basin. A multi-stage morphotectonic evolution with thick-skinned basement uplift and coeval thin-skinned deformation in the intermontane basins is suggested for the study area. The release of stresses associated with the foreland deformation can result in strong earthquakes, as the study area is known for recurrent and historical, destructive earthquakes. The available continuous record reaches back in time, when the strongest event in 1692 (magnitude 7 or intensity IX) destroyed the city of Esteco. Destructive earthquakes and surface deformation are thus a hallmark of this part of the Andean foreland. With state-of-the-art Python packages (e.g. pyrocko, ObsPy), a semi-automatic approach is followed to analyze the collected continuous data of the seismological network. The resulting 1435 hypocenter locations consist of three different groups: 1.) local crustal earthquakes (nearly half of the events belong to this group), 2.) interplate activity, of regional distance in the slab of the Nazca-plate, and 3.) very deep earthquakes at about 600km depth. My major interest focused on the first event class. Those crustal events are partly aftershock events of the El Galpón earthquake and a second earthquake, in the south of the same fault. Further events can be considered as background seismicity of other faults within the study area. Strikingly, the seismogenic zone encompass the whole crust and propagates brittle deformation down, close to the Moho. From the collected seismological data, a local seismic velocity model is estimated, using VELEST. After the execution of various stability tests, the robust minimum 1D-velocity model implies guiding values for the composition of the local, subsurface structure of the crust. Afterwards, performing a hypocenter relocation enables the assignment of individual earthquakes to aftershock clusters or extended seismotectonic structures. This allows the mapping of previously unknown seismogenic faults. Finally, focal mechanisms are modeled for events with acurately located hypocenters, using the newly derived local velocity model. A compressive regime is attested by the majority of focal mechanisms, while the strike direction of the individual seismogenic structures is in agreement with the overall north – south orientation of the Central Andes, its mountain front, and individual mountain ranges in the southern Santa-Bárbara-System. N2 - Nach einem schweren Erdbeben der Magnitude M W 5.7 am 17. Oktober 2015 in El Galpón, in der Provinz Salta im Nordwesten Argentiniens, habe ich ein lokales seismologisches Netzwerk, um das vermutete Epizentrum herum, aufgebaut. Dabei haben 13 Stationen kontinuierlich für 15 Monate gemessen. Das Netzwerk wurde in einem Gebiet installiert, welches durch tektonische Störungen charakterisiert ist, die entweder in der Kreidezeit zunächst als Abschiebungen initiiert und später als Aufschiebungen reaktiviert wurden oder in der geologischen jüngeren Vergangenheit erst entstanden sind. Die Intervallzeiten zwischen zwei Erdbeben sind dabei häufig unbekannt. Das Erdbeben von 2015 trat im Santa-Barbara-System im Argentinischen Vorland, 17 km unter der Erdoberfläche auf. Diese Region ist die östlichste strukturgeologische Provinz der Zentralanden und dem broken-foreland-Typus zuzuordnen. Im Norden schließt sich der Bolivianische Faltengürtel (Sierras Subandinas) und im Süden die Sierras Pampeanas an; im Osten liegt das Chaco-Paraná Becken. Eine mehrstufige morphotektonische Entwicklung wird hier vermutet, bei der das Grundgebirge durch als thick-skinned bezeichnete Deformation herausgehoben wurde und die dazwischen liegenden Intermontanbecken gleichzeitig Deformation des Typs thin-skinned erfahren haben. Die plötzliche Spannungsfreisetzung, die mit dieser Vorlanddeformation einhergeht, kann zu starken Erdbeben führen. Das Untersuchungsgebiet ist für wiederkehrende und historische, zerstörerische Erdbeben bekannt. Der zur Verfügung stehenden Aufzeichnungen reichen bis in das Jahr 1692 zurück, als ein Erdbeben der Magnitude M 7 (oder Intensität IX) die Stadt Esteco zerstörte. Daher sind zerstörerische Erdbeben ein besonderes Kennzeichen in diesem Teil des Andenvorlands. Für die Analyse der im seismologischen Netzwerk aufgezeichneten kontinuierlichen Daten wurde ein semiautomatischer Ansatz verfolgt, der mittels hochmoderner Python-Bibliotheken informationstechnisch umgesetzt wurde. Die resultierenden 1435 Erdbeben bestehen aus drei verschiedenen Gruppen: 1.) lokale Erdbeben in der Erdkruste (die etwa die Hälfte aller Events ausmachen), 2.) weiter entfernte Interplattenaktivität, die durch die Subduktion der Nazca-Platte unter den Südamerikanischen Kontinent hervorgerufen wird und 3.) sehr tiefen Erdbeben in etwa 600 km Tiefe. Mein Hauptaugenmerk lag dabei auf der ersten Gruppe. Diese krustalen Ereignisse sind teilweise Nachbeben des El Galpón Erdbebens und eines weiteren Bebens, welches sich weiter im Süden an der gleichen Störung ereignete. Die restlichen Beben können der allgemeinen Hintergrundaktivität entlang weiterer Störungen im Untersuchungsgebiet zugeschrieben werden. Beachtenswert ist dabei der Umstand, dass die Erdbebenaktivität in der gesamten Kruste beobachtet werden kann und sich dadurch die Deformation bis a fast an den Erdmantel ausbreitet. Mit den gesammelten Daten kann, unter der Verwendung der VELEST Software, ein lokales seismisches Geschwindigkeitsmodell bestimmt werden. Nach der Durchführung verschiedener Stabilitätstests, können aus dem robusten eindimensionalen Modell Richtwerte für die Zusammensetzung und den Aufbau der Erdkruste gewonnen werden. Dieanschließende Relokalisierung von Erdbebenherden erlaubt die Zuordnung einzelner Erdbeben zu Erdbebenclustern oder ausgedehnten seismotektonischen Strukturen. Dadurch können sogar zuvor unbekannte seismogene Störungen kartiert werden. Schlussendlich, werden Herdflächenlösungen für Beben mit präzise lokalisierten Erdbebenherden und unter der Einbeziehung des neu bestimmten lokalen Geschwindigkeitsmodells modelliert. Der Großteil der resultierenden Lösungen bestätigt das vorherrschende kompressive Regime. Das Streichen der einzelnen seismogenen Strukturen stimmt größtenteils mit der allgemeinen Nord – Süd Ausrichtugn der Zentralanden, ihrer Gebirgsfront und den einzelnen Höhenzügen im Santa-Barbará-System überein. T2 - Seismologische und Seismotektonische Analyse des Vorlandsystems der nordwestargentinischen Zentralanden KW - Seismology KW - Seismotektonik KW - Geophysics KW - Andes KW - Geosciences KW - Argentina KW - Anden KW - Seismologie KW - Geophysik KW - Geowissenschaften KW - Argentinien Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473240 ER - TY - GEN A1 - Zapata, Sebastian A1 - Sobel, Edward A1 - Del Papa, Cecilia A1 - Glodny, Johannes T1 - Upper Plate Controls on the Formation of Broken Foreland Basins in the Andean Retroarc Between 26°S and 28°S BT - From Cretaceous Rifting to Paleogene and Miocene Broken Foreland Basins T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Marked along-strike changes in stratigraphy, mountain belt morphology, basement exhumation, and deformation styles characterize the Andean retroarc; these changes have previously been related to spatiotemporal variations in the subduction angle. We modeled new apatite fission track and apatite (U-Th-Sm)/He data from nine ranges located between 26 degrees S and 28 degrees S. Using new and previously published data, we constructed a Cretaceous to Pliocene paleogeographic model that delineates a four-stage tectonic evolution: extensional tectonics during the Cretaceous (120-75 Ma), the formation of a broken foreland basin between 55 and 30 Ma, reheating due to burial beneath sedimentary rocks (18-13 Ma), and deformation, exhumation, and surface uplift during the Late Miocene and the Pliocene (13-3 Ma). Our model highlights how preexisting upper plate structures control the deformation patterns of broken foreland basins. Because retroarc deformation predates flat-slab subduction, we propose that slab anchoring may have been the precursor of Eocene-Oligocene compression in the Andean retroarc. Our model challenges models which consider broken foreland basins and retroarc deformation in the NW Argentinian Andes to be directly related to Miocene flat subduction. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1215 KW - Northern Sierras Pampeanas KW - Fission-track thermochronology KW - Middle Eocene deformation KW - Santa-Barbara system KW - flat-slab subduction KW - tectonic inversion KW - Apatite (U-TH)/HE KW - Puna Plateau KW - radiation-damage KW - length measurements Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-523823 SN - 1866-8372 IS - 7 ER - TY - THES A1 - Zapata, Sebastian Henao T1 - Paleozoic to Pliocene evolution of the Andean retroarc between 26 and 28°S: interactions between tectonics, climate, and upper plate architecture T1 - Paläozoische bis pliozäne Entwicklung des andinen Randbeckens zwischen 26 und 28° Süd: Interaktion von Tektonik, Klima und Architektur der kontinentalen Kruste BT - interactions between tectonics, climate, and upper plate architecture N2 - Interactions and feedbacks between tectonics, climate, and upper plate architecture control basin geometry, relief, and depositional systems. The Andes is part of a longlived continental margin characterized by multiple tectonic cycles which have strongly modified the Andean upper plate architecture. In the Andean retroarc, spatiotemporal variations in the structure of the upper plate and tectonic regimes have resulted in marked along-strike variations in basin geometry, stratigraphy, deformational style, and mountain belt morphology. These along-strike variations include high-elevation plateaus (Altiplano and Puna) associated with a thin-skin fold-and-thrust-belt and thick-skin deformation in broken foreland basins such as the Santa Barbara system and the Sierras Pampeanas. At the confluence of the Puna Plateau, the Santa Barbara system and the Sierras Pampeanas, major along-strike changes in upper plate architecture, mountain belt morphology, basement exhumation, and deformation style can be recognized. I have used a source to sink approach to unravel the spatiotemporal tectonic evolution of the Andean retroarc between 26 and 28°S. I obtained a large low-temperature thermochronology data set from basement units which includes apatite fission track, apatite U-Th-Sm/He, and zircon U-Th/He (ZHe) cooling ages. Stratigraphic descriptions of Miocene units were temporally constrained by U-Pb LA-ICP-MS zircon ages from interbedded pyroclastic material. Modeled ZHe ages suggest that the basement of the study area was exhumed during the Famatinian orogeny (550-450 Ma), followed by a period of relative tectonic quiescence during the Paleozoic and the Triassic. The basement experienced horst exhumation during the Cretaceous development of the Salta rift. After initial exhumation, deposition of thick Cretaceous syn-rift strata caused reheating of several basement blocks within the Santa Barbara system. During the Eocene-Oligocene, the Andean compressional setting was responsible for the exhumation of several disconnected basement blocks. These exhumed blocks were separated by areas of low relief, in which humid climate and low erosion rates facilitated the development of etchplains on the crystalline basement. The exhumed basement blocks formed an Eocene to Oligocene broken foreland basin in the back-bulge depozone of the Andean foreland. During the Early Miocene, foreland basin strata filled up the preexisting Paleogene topography. The basement blocks in lower relief positions were reheated; associated geothermal gradients were higher than 25°C/km. Miocene volcanism was responsible for lateral variations on the amount of reheating along the Campo-Arenal basin. Around 12 Ma, a new deformational phase modified the drainage network and fragmented the lacustrine system. As deformation and rock uplift continued, the easily eroded sedimentary cover was efficiently removed and reworked by an ephemeral fluvial system, preventing the development of significant relief. After ~6 Ma, the low erodibility of the basement blocks which began to be exposed caused relief increase, leading to the development of stable fluvial systems. Progressive relief development modified atmospheric circulation, creating a rainfall gradient. After 3 Ma, orographic rainfall and high relief lead to the development of proximal fluvial-gravitational depositional systems in the surrounding basins. N2 - Die Wechselwirkungen zwischen Tektonik, Klima und dem Aufbau der Oberkruste beeinflussen Relief, Beckengeometrien und sedimentäre Systeme. Die geologische Geschichte der Anden ist durch wiederkehrende tektonische Zyklen gekennzeichnet, die nachhaltig den Aufbau der umliegenden Oberkruste geprägt haben. Im Vorlandbecken der Anden (Retro-Arc Typus) führten räumlich und zeitlich variierende strukturgeologische Prozesse in der Oberkruste zu diversen Beckengeometrien, Deformationsvorgängen, sowie stratigraphische und geomorphologische Markern entlang des Streichens des Hochgebirgszuges. Die räumliche Variation beinhaltet unter anderem Hochgebirgsplateaus wie dem Altiplano oder der Puna, die jeweils mit dem thin-skin Aufschiebungsgürtel oder der thick-skin Deformation des zerbrochenen Vorlands im Santa-Barbara-System, bzw. der Sierras Pampeanas assoziiert werden. Besonders am Tripelpunkt zwischen der Puna Plateau, dem Santa-Barbara-System und der Sierras Pampeanas werden deutliche Veränderungen in der Oberkrustenarchitektur, der Oberflächenbeschaffenheit, der dominierenden Deformationsprozesse und der Heraushebung des Grundgebirges ersichtlich. Ich habe einen Quelle-zu-Senke Ansatz genutzt, um die räumliche und zeitliche tektonische Entwicklung der zentralen Ostanden zwischen 26° und 28°S aufzudecken. Dabei habe ich einen umfangreichen Niedertemperaturdatensatz aus Gesteinen des Grundgebirges gewonnen, welche folgende Methoden mit einschließen: Apatit Spaltspur Methode (apatite fission Track, AFT), Apatit U-Th-Sm/He (AHe), und Zirkon U-Th/He (Zhe) Abkühlalter. Für die stratigraphische Besprechung und die exakte Altersbestimmung der Einheiten des Miozäns wurden U-Pb ICP-MS-LA Zirkonalter aus pyroklastisch zwischengelagerten Materialien genutzt. Die modellierten ZHe Altersdatierungen legen den Schluss nahe, dass das Grundgebirge im Untersuchungsgebiet während der Famatinischen Orogenese (vor 550-450 Ma) herausgehoben wurde, woraufhin im Paläozoikum und dem Trias eine Phase von tektonischer Ruhe folgte. Während der Kreide und dem einsetzenden Salta Rift wurde das Grundgebirge in Form von Horststrukturen freigelegt. Nach der ersten Freilegung wurden einige Grundgebirgsblöcke wieder erwärmt durch die rift-parallele Grabenverfüllung im Santa-Barbara-System. Während dem Eozän und dem Oligozän ist der Übergang in ein kompressives Stressregime verantwortlich für die Heraushebung mehrerer losgelöster Grundgebirgszüge. Diese freigelegten Blöcke entstanden zeitgleich wie Gebiete mit flachem Relief, wo feuchtes Klima und geringe Erosionsraten die Herausbildung von „etchplains“ im kristallinem Grundgebirge ermöglichen. Weiterhin durchbrechen diese Gebirgsblöcke das Vorlandbecken, welches sich im Depozentrum des back-bulges der Anden herausgebildet hat. Während des frühen Miozäns füllten Vorlandbeckensedimente die vorher vorhandene paläogene Topographie. Die Grundgebirgsblöcke mit niedrigem Relief wurden wieder erwärmt und wiesen einen Temperaturgradienten von mehr als 25°C/km auf. Der Vulkanismus im Miozän war verantwortlich für laterale Variationen der Intensität der erneuten Erwärmung innerhalb des Campo-Arenal Beckens. Vor etwa 12 Ma modifizierte eine neue Deformationsphase das Abflussnetz und zerstückelte das lakustrische System. Während die Deformation und die Gebirgsbildung anhielt, wurden überlagernde Sedimentschichten einfach erodiert, effizient beseitigt und durch fluviale Prozesse umgelagert, die die weitere Herausbildung von Relief verhinderten. Nach ~6 Ma ermöglichte die geringe Erodierbarkeit des Grundgebirges deren Reliefzunahme, wodurch sich stabile fluviale Systeme herausbildeten. Möglicherweise unterbrach die fortschreitende Reliefzunahme atmosphärische Zirkulationsprozesse, sodass sich laterale Niederschlagsgradienten ausbildeten. Nach 3 Ma führten orographische Niederschlagsbarrieren zu der Entwicklung von nahe liegenden fluvial-gravitationalen Ablagerungssystemen in den umliegenden Becken. KW - climate KW - tectonics KW - Andes KW - inherited structures KW - Klima KW - Tektonik KW - Anden KW - ererbte Strukturen Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439036 ER -