TY - JOUR A1 - Brechun, Katherine Emily A1 - Arndt, Katja Maren A1 - Woolley, G. Andrew T1 - Selection of protein-protein interactions of desired affinities with a bandpass circuit JF - Journal of molecular biology : JMB N2 - We have developed a genetic circuit in Escherichia coli that can be used to select for protein-protein interactions of different strengths by changing antibiotic concentrations in the media. The genetic circuit links protein-protein interaction strength to beta-lactamase activity while simultaneously imposing tuneable positive and negative selection pressure for beta-lactamase activity. Cells only survive if they express interacting proteins with affinities that fall within set high- and low-pass thresholds; i.e. the circuit therefore acts as a bandpass filter for protein-protein interactions. We show that the circuit can be used to recover protein-protein interactions of desired affinity from a mixed population with a range of affinities. The circuit can also be used to select for inhibitors of protein-protein interactions of defined strength. (C) 2018 Elsevier Ltd. All rights reserved. KW - synthetic biology KW - genetic circuit KW - biological engineering KW - protein-protein interactions KW - twin-arginine translocation KW - selection system Y1 - 2018 U6 - https://doi.org/10.1016/j.jmb.2018.11.011 SN - 0022-2836 SN - 1089-8638 VL - 431 IS - 2 SP - 391 EP - 400 PB - Elsevier CY - London ER - TY - THES A1 - Chandrakanth Shetty, Sunidhi T1 - Directed chemical communication in artificial eukaryotic cells T1 - Gezielte chemische Kommunikation in künstlichen eukaryotischen Zellen N2 - Eukaryotic cells can be regarded as complex microreactors capable of performing various biochemical reactions in parallel which are necessary to sustain life. An essential prerequisite for these complex metabolic reactions to occur is the evolution of lipid membrane-bound organelles enabling compartmental- ization of reactions and biomolecules. This allows for a spatiotemporal control over the metabolic reactions within the cellular system. Intracellular organi- zation arising due to compartmentalization is a key feature of all living cells and has inspired synthetic biologists to engineer such systems with bottom-up approaches. Artificial cells provide an ideal platform to isolate and study specific re- actions without the interference from the complex network of biomolecules present in biological cells. To mimic the hierarchical architecture of eukaryotic cells, multi-compartment assemblies with nested liposomal structures also re- ferred to as multi-vesicular vesicles (MVVs) have been widely adopted. Most of the previously reported multi-compartment systems adopt bulk method- ologies which suffer from low yield and poor control over size. Microfluidic strategies help circumvent these issues and facilitate a high-throughput and robust technique to assemble MVVs of uniform size distribution. In this thesis, firstly, the bulk methodologies are explored to build MVVs and implement a synthetic signalling cascade. Next, a polydimethylsiloxane (PDMS)-based microfluidic platform is introduced to build MVVs and the significance of PEGylated lipids for the successful encapsulation of inner com- partments to generate stable multi-compartment systems is highlighted. Next, a novel two-inlet channel PDMS-based microfluidic device to create MVVs encompassing a three-step enzymatic reaction cascade is presented. A directed reaction pathway comprising of the enzymes α-glucosidase (α-Glc), glucose oxidase (GOx), and horseradish peroxidase (HRP) spanning across three compartments via reconstitution of size-selective membrane proteins is described. Furthermore, owing to the monodispersity of our MVVs due to microfluidic strategies, this platform is employed to study the effect of com- partmentalization on reaction kinetics. Further integration of cell-free expression module into the MVVs would allow for gene-mediated signal transduction within artificial eukaryotic cells. Therefore, the chemically inducible cell-free expression of a membrane protein alpha-hemolysin and its further reconstitution into liposomes is carried out. In conclusion, the present thesis aims to build artificial eukaryotic cells to achieve size-selective chemical communication that also show potential for applications as micro reactors and as vehicles for drug delivery. N2 - Eukaryontische Zellen können als komplexe Mikroreaktoren betrachtet werden, die in der Lage sind, verschiedene biochemische Reaktionen parallel durchzuführen, die für die Aufrechterhaltung des Lebens notwendig sind. Eine wesentliche Voraussetzung für die Durchführung dieser komplexen Stoffwechselreaktionen ist die Entwicklung von Organellen mit Lipidmembranen, die eine Kompartimentierung von Reaktionen und Biomolekülen ermöglichen. Dies ermöglicht eine räumlich-zeitliche Kontrolle über die Stoffwechselreaktionen innerhalb des zellulären Systems. Die durch die Kompartimentierung entstehende intrazelluläre Organisation ist ein Schlüsselmerkmal aller lebenden Zellen und hat synthetische Biologen dazu inspiriert, solche Systeme mit Bottom-up-Ansätzen zu entwickeln. Künstliche Zellen bieten eine ideale Plattform, um spezifische Reaktionen zu isolieren und zu untersuchen, ohne dass das komplexe Netzwerk von Biomolekülen, das in biologischen Zellen vorhanden ist, stört. Um die hierarchische Architektur eukaryontischer Zellen zu imitieren, haben sich Multikompartiment-Anordnungen mit verschachtelten liposomalen Strukturen, die auch als multivesikuläre Vesikel (MVV) bezeichnet werden, durchgesetzt. Die meisten der bisher vorgestellten Multikompartiment-Systeme basieren auf Bulk-Methoden, die eine geringe Ausbeute und eine schlechte Kontrolle über die Größe aufweisen. Mikrofluidische Strategien helfen, diese Probleme zu umgehen und ermöglichen eine robuste Technik mit hohem Durchsatz, um MVVs mit einheitlicher Größenverteilung herzustellen. In dieser Dissertation werden zunächst die Bulk-Methoden zum Aufbau von MVVs und zur Implementierung einer synthetischen Signalkaskade untersucht. Anschließend wird eine auf Polydimethylsiloxan (PDMS) basierende mikrofluidische Plattform zur Herstellung von MVVs vorgestellt und die Bedeutung von PEGylierten Lipiden für die erfolgreiche Verkapselung der inneren Kompartimente zur Erzeugung stabiler Multikompartiment-Systeme hervorgehoben. Es wird ein neuartiges mikrofluidisches Gerät mit zwei Einlasskanälen auf PDMS-Basis zur Herstellung von MVVs vorgestellt, das eine dreistufige enzymatische Reaktionskaskade umfasst. Es wird ein gerichteter Reaktionsweg beschrieben, der die Enzyme α-Glucosidase (α-Glc), Glucoseoxidase (GOx) und Meerrettichperoxidase (HRP) umfasst und sich über drei Kompartimente erstreckt, die durch die Rekonstitution von größenselektiven Membranproteinen entstehen. Aufgrund der Monodispersität unserer MVVs durch mikrofluidische Strategien nutze ich diese Plattform außerdem, um die Auswirkungen der Kompartimentierung auf die Reaktionskinetik zu untersuchen. Eine weitere Integration von zellfreien Expressionsmodulen in MVVs würde eine genvermittelte Signaltransduktion in künstlichen eukaryotischen Zellen ermöglichen. Daher wird die chemisch induzierbare zellfreie Expression eines Membranproteins alpha-Hämolysin und seine weitere Rekonstitution in Liposomen durchgeführt. Zusammenfassend lässt sich sagen, dass die vorliegende Arbeit darauf abzielt, künstliche eukaryotische Zellen zu bauen, um eine größenselektive chemische Kommunikation zu erreichen, und das Potenzial für Anwendungen als Mikroreaktoren und als Vehikel für die Verabreichung von Medikamenten aufweisen. KW - microfluidics KW - synthetic biology KW - Mikrofluidik KW - synthetische Biologie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-533642 ER - TY - JOUR A1 - de la Cruz, Jorge Gonzalez A1 - Machens, Fabian A1 - Messerschmidt, Katrin A1 - Bar-Even, Arren T1 - Core Catalysis of the Reductive Glycine Pathway Demonstrated in Yeast JF - ACS synthetic biology N2 - One-carbon (C1) compounds are attractive microbial feedstocks as they can be efficiently produced from widely available resources. Formate, in particular, represents a promising growth substrate, as it can be generated from electrochemical reduction of CO2 and fed to microorganisms in a soluble form. We previously identified the synthetic reductive glycine pathway as the most efficient route for aerobic growth on formate. We further demonstrated pathway activity in Escherichia coli after expression of both native and foreign genes. Here, we explore whether the reductive glycine pathway could be established in a model microorganism using only native enzymes. We used the yeast Saccharomyces cerevisiae as host and show that overexpression of only endogenous enzymes enables glycine biosynthesis from formate and CO2 in a strain that is otherwise auxotrophic for glycine. We find the pathway to be highly active in this host, where 0.125 mM formate is sufficient to support growth. Notably, the formate-dependent growth rate of the engineered S. cerevisiae strain remained roughly constant over a very wide range of formate concentrations, 1-500 mM, indicating both high affinity for formate use and high tolerance toward elevated concentration of this C1 feedstock. Our results, as well the availability of endogenous NAD-dependent formate dehydrogenase, indicate that yeast might be an especially suitable host for engineering growth on formate. KW - metabolic engineering KW - synthetic biology KW - one-carbon metabolism KW - carbon labeling KW - tetrahydrofolate KW - glycine cleavage system Y1 - 2019 U6 - https://doi.org/10.1021/acssynbio.8b00464 SN - 2161-5063 VL - 8 IS - 5 SP - 911 EP - 917 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Demin, Paul T1 - Blaulicht-aktivierbares Proteinexpressionssystem in Saccharomyces cerevisiae T1 - Blue light-inducible protein expression system in Saccharomyces cerevisiae N2 - Synthetische Transkriptionsfaktoren bestehen wie natürliche Transkriptionsfaktoren aus einer DNA-Bindedomäne, die sich spezifisch an die Bindestellensequenz vor dem Ziel-Gen anlagert, und einer Aktivierungsdomäne, die die Transkriptionsmaschinerie rekrutiert, sodass das Zielgen exprimiert wird. Der Unterschied zu den natürlichen Transkriptionsfaktoren ist, sowohl dass die DNA-Bindedomäne als auch die Aktivierungsdomäne wirtsfremd sein können und dadurch künstliche Stoffwechselwege im Wirt, größtenteils chemisch, induziert werden können. Optogenetische synthetische Transkriptionsfaktoren, die hier entwickelt wurden, gehen einen Schritt weiter. Dabei ist die DNA-Bindedomäne nicht mehr an die Aktivierungsdomäne, sondern mit dem Blaulicht-Photorezeptor CRY2 gekoppelt. Die Aktivierungsdomäne wurde mit dem Interaktionspartner CIB1 fusioniert. Unter Blaulichtbestrahlung dimerisieren CRY2 und CIB1 und damit einhergehend die beiden Domänen, sodass ein funktionsfähiger Transkriptionsfaktor entsteht. Dieses System wurde in die Saccharomyces cerevisiae genomisch integriert. Verifiziert wurde das konstruierte System mit Hilfe des Reporters yEGFP, welcher durchflusszytometrisch detektiert werden konnte. Es konnte gezeigt werden, dass die yEGFP Expression variabel gestaltet werden kann, indem unterschiedlich lange Blaulichtimpulse ausgesendet wurden, die DNA-Bindedomäne, die Aktivierungsdomäne oder die Anzahl der Bindestellen, an dem sich die DNA-Bindedomäne anlagert, verändert wurden. Um das System für industrielle Anwendungen attraktiv zu gestalten, wurde das System vom Deepwell-Maßstab auf Photobioreaktor-Maßstab hochskaliert. Außerdem erwies sich das Blaulichtsystem sowohl im Laborstamm YPH500 als auch im industriell oft verwendeten Hefestamm CEN.PK als funktional. Des Weiteren konnte ein industrierelevante Protein ebenso mit Hilfe des verifizierten Systems exprimiert werden. Schlussendlich konnte in dieser Arbeit das etablierte Blaulicht-System erfolgreich mit einem Rotlichtsystem kombiniert werden, was zuvor noch nicht beschrieben wurde. N2 - Like natural transcription factors, synthetic transcription factors consist of a DNA-binding domain that attaches specifically to the binding site sequence in front of the target gene, and an activation domain that recruits the transcription machinery so that the target gene is expressed. The difference to natural transcription factors is that both the DNA binding domain and the activation domain can be host foreign and artificial metabolic pathways, mostly chemically, can be induced in the host. In this work, new optogenetic synthetic transcription factors were developed so that chemical induction becomes obsolete. The DNA binding domain is no longer linked to the activation domain but to the blue light photoreceptor CRY2. The activation domain was fused to the interaction partner CIB1. Upon blue light irradiation, CRY2 and CIB1 dimerize and thus the two domains, resulting in a functional transcription factor. Six different prokaryotic DNA-binding domains and a total of two different activation domains, viral and fungal, were recombined with CRY2 and CIB1, respectively, and genomically integrated into the eukaryotic cell factory Saccharomyces cerevisiae. Since the blue light dimerization is based on the chromophore FAD, which the yeast can synthesize itself, only the blue light had to be switched on for the induction. The constructed system was verified with the help of the reporter yEGFP, which could be detected by flow cytometry. It could be shown that the yEGFP expression could be made variable by emitting blue light pulses of different lengths, changing the DNA binding domain, the activation domain or the copy number of binding sites at which the DNA binding domain attaches. To make the system attractive for industrial applications, the system was scaled up from deepwell scale to photobioreactor scale. In addition, the blue light system proved to be functional both in the laboratory strain YPH500 and in the yeast strain CEN.PK, which is often used industrially. Furthermore, the industrially relevant protein VP1 could also be expressed using the verified system. Due to its great flexibility, the blue light system established here was christened/named FLIRT (Flexible Blue Light Induced Transcription). Finally, in this work, the established flirt system could be successfully combined with a red light system, which has not been described before. KW - Synthetische Biologie KW - Hefe KW - Saccharomyces cerevisiae KW - Blaulicht KW - Transkriptionsfaktoren KW - Bioreaktor KW - bioreactor KW - blue light KW - budding yeast KW - Saccharomyces cerevisiae KW - synthetic biology KW - transcription factors Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-559696 ER - TY - JOUR A1 - Gorochowski, Thomas E. A1 - Aycilar-Kucukgoze, Irem A1 - Bovenberg, Roel A. L. A1 - Roubos, Johannes A. A1 - Ignatova, Zoya T1 - A Minimal Model of Ribosome Allocation Dynamics Captures Trade-offs in Expression between Endogenous and Synthetic Genes JF - ACS synthetic biology N2 - Cells contain a finite set of resources that must be distributed across many processes to ensure survival. Among them, the largest proportion of cellular resources is dedicated to protein translation. Synthetic biology often exploits these resources in executing orthogonal genetic circuits, yet the burden this places on the cell is rarely considered. Here, we develop a minimal model of ribosome allocation dynamics capturing the demands on translation when expressing a synthetic construct together with endogenous genes required for the maintenance of cell physiology. Critically, it contains three key variables related to design parameters of the synthetic construct covering transcript abundance, translation initiation rate, and elongation time. We show that model-predicted changes in ribosome allocation closely match experimental shifts in synthetic protein expression rate and cellular growth. Intriguingly, the model is also able to accurately infer transcript levels and translation times after further exposure to additional ambient stress. Our results demonstrate that a simple model of resource allocation faithfully captures the redistribution of protein synthesis resources when faced with the burden of synthetic gene expression and environmental stress. The tractable nature of the model makes it a versatile tool for exploring the guiding principles of efficient heterologous expression and the indirect interactions that can arise between synthetic circuits and their host chassis because of competition for shared translational resources. KW - protein biosynthesis KW - translation KW - synthetic biology KW - systems biology Y1 - 2016 U6 - https://doi.org/10.1021/acssynbio.6b00040 SN - 2161-5063 VL - 5 SP - 710 EP - 720 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Hochrein, Lena T1 - Development of a new DNA-assembly method and its application for the establishment of a red light-sensing regulation system T1 - Entwicklung einer neuartigen DNS-Assemblierungsmethode und ihre Anwendung für die Etablierung eines Rotlicht-responsiven Regulierungssystems N2 - In der hier vorgelegten Doktorarbeit wurde eine Strategie zur schnellen, einfachen und zuverlässigen Assemblierung von DNS-Fragmenten, genannt AssemblX, entwickelt. Diese kann genutzt werden, um komplexe DNS-Konstrukte, wie beispielsweise komplette Biosynthesewege, aufzubauen. Dies dient der Produktion von technisch oder medizinisch relevanten Produkten in biotechnologisch nutzbaren Organismen. Die Vorteile der Klonierungsstrategie liegen in der Schnelligkeit der Klonierung, der Flexibilität bezüglich des Wirtsorganismus, sowie der hohen Effektivität, die durch gezielte Optimierung erreicht wurde. Die entwickelte Technik erlaubt die nahtlose Assemblierung von Genfragmenten und bietet eine Komplettlösung von der Software-gestützten Planung bis zur Fertigstellung von DNS-Konstrukten, welche die Größe von Mini-Chromosomen erreichen können. Mit Hilfe der oben beschriebenen AssemblX Strategie wurde eine optogenetische Plattform für die Bäckerhefe Saccharomyces cerevisiae etabliert. Diese besteht aus einem Rotlicht-sensitiven Photorezeptor und seinem interagierenden Partner aus Arabidopsis thaliana, welche in lichtabhängiger Weise miteinander agieren. Diese Interaktion wurde genutzt, um zwei Rotlicht-aktivierbare Proteine zu erstellen: Einen Transkriptionsfaktor, der nach Applikation eines Lichtpulses die Produktion eines frei wählbaren Proteins stimuliert, sowie eine Cre Rekombinase, die ebenfalls nach Bestrahlung mit einer bestimmten Wellenlänge die zufallsbasierte Reorganisation bestimmter DNS-Konstrukte ermöglicht. Zusammenfassend wurden damit drei Werkzeuge für die synthetische Biologie etabliert. Diese ermöglichen den Aufbau von komplexen Biosynthesewegen, deren Licht-abhängige Regulation, sowie die zufallsbasierte Rekombination zu Optimierungszwecken. N2 - With Saccharomyces cerevisiae being a commonly used host organism for synthetic biology and biotechnology approaches, the work presented here aims at the development of novel tools to improve and facilitate pathway engineering and heterologous protein production in yeast. Initially, the multi-part assembly strategy AssemblX was established, which allows the fast, user-friendly and highly efficient construction of up to 25 units, e.g. genes, into a single DNA construct. To speed up complex assembly projects, starting from sub-gene fragments and resulting in mini-chromosome sized constructs, AssemblX follows a level-based approach: Level 0 stands for the assembly of genes from multiple sub-gene fragments; Level 1 for the combination of up to five Level 0 units into one Level 1 module; Level 2 for linkages of up to five Level 1 modules into one Level 2 module. This way, all Level 0 and subsequently all Level 1 assemblies can be carried out simultaneously. Individually planned, overlap-based Level 0 assemblies enable scar-free and sequence-independent assemblies of transcriptional units, without limitations in fragment number, size or content. Level 1 and Level 2 assemblies, which are carried out via predefined, computationally optimized homology regions, follow a standardized, highly efficient and PCR-free scheme. AssemblX follows a virtually sequence-independent scheme with no need for time-consuming domestication of assembly parts. To minimize the risk of human error and to facilitate the planning of assembly projects, especially for individually designed Level 0 constructs, the whole AssemblX process is accompanied by a user-friendly webtool. This webtool provides the user with an easy-to-use operating surface and returns a bench-protocol including all cloning steps. The efficiency of the assembly process is further boosted through the implementation of different features, e.g. ccdB counter selection and marker switching/reconstitution. Due to the design of homology regions and vector backbones the user can flexibly choose between various overlap-based cloning methods, enabling cost-efficient assemblies which can be carried out either in E. coli or yeast. Protein production in yeast is additionally supported by a characterized library of 40 constitutive promoters, fully integrated into the AssemblX toolbox. This provides the user with a starting point for protein balancing and pathway engineering. Furthermore, the final assembly cassette can be subcloned into any vector, giving the user the flexibility to transfer the individual construct into any host organism different from yeast. As successful production of heterologous compounds generally requires a precise adjustment of protein levels or even manipulation of the host genome to e.g. inhibit unwanted feedback regulations, the optogenetic transcriptional regulation tool PhiReX was designed. In recent years, light induction was reported to enable easy, reversible, fast, non-toxic and nearly gratuitous regulation, thereby providing manifold advantages compared to conventional chemical inducers. The optogenetic interface established in this study is based on the photoreceptor PhyB and its interacting protein PIF3. Both proteins, derived from Arabidopsis thaliana, dimerize in a red/far-red light-responsive manner. This interaction depends on a chromophore, naturally not available in yeast. By fusing split proteins to both components of the optical dimerizer, active enzymes can be reconstituted in a light-dependent manner. For the construction of the red/far-red light sensing gene expression system PhiReX, a customizable synTALE-DNA binding domain was fused to PhyB, and a VP64 activation domain to PIF3. The synTALE-based transcription factor allows programmable targeting of any desired promoter region. The first, plasmid-based PhiReX version mediates chromophore- and light-dependent expression of the reporter gene, but required further optimization regarding its robustness, basal expression and maximum output. This was achieved by genome-integration of the optical regulator pair, by cloning the reporter cassette on a high-copy plasmid and by additional molecular modifications of the fusion proteins regarding their cellular localization. In combination, this results in a robust and efficient activation of cells over an incubation time of at least 48 h. Finally, to boost the potential of PhiReX for biotechnological applications, yeast was engineered to produce the chromophore. This overcomes the need to supply the expensive and photo-labile compound exogenously. The expression output mediated through PhiReX is comparable to the strong constitutive yeast TDH3 promoter and - in the experiments described here - clearly exceeds the commonly used galactose inducible GAL1 promoter. The fast-developing field of synthetic biology enables the construction of complete synthetic genomes. The upcoming Synthetic Yeast Sc2.0 Project is currently underway to redesign and synthesize the S. cerevisiae genome. As a prerequisite for the so-called “SCRaMbLE” system, all Sc2.0 chromosomes incorporate symmetrical target sites for Cre recombinase (loxPsym sites), enabling rearrangement of the yeast genome after induction of Cre with the toxic hormonal substance beta-estradiol. To overcome the safety concern linked to the use of beta-estradiol, a red light-inducible Cre recombinase, dubbed L-SCRaMbLE, was established in this study. L-SCRaMbLE was demonstrated to allow a time- and chromophore-dependent recombination with reliable off-states when applied to a plasmid containing four genes of the beta-carotene pathway, each flanked with loxPsym sites. When directly compared to the original induction system, L-SCRaMbLE generates a larger variety of recombination events and lower basal activity. In conclusion, L-SCRaMbLE provides a promising and powerful tool for genome rearrangement. The three tools developed in this study provide so far unmatched possibilities to tackle complex synthetic biology projects in yeast by addressing three different stages: fast and reliable biosynthetic pathway assembly; highly specific, orthogonal gene regulation; and tightly controlled synthetic evolution of loxPsym-containing DNA constructs. KW - synthetic biology KW - pathway engineering KW - DNA assembly KW - transcription factor KW - Cre recombinase KW - optogenetics KW - synthetische Biologie KW - Optimierung von Biosynthesewegen KW - DNS Assemblierung KW - Transkriptionsfaktor KW - Cre Rekombinase KW - Optogenetik Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-404441 ER - TY - THES A1 - Kirchhofer, Tabea T1 - The development of multi - compartmentalised systems for the directed organisation of artificial cells N2 - Membrane contact sites are of particular interest in the field of synthetic biology and biophysics. They are involved in a great variety of cellular functions. They form in between two cellular organelles or an organelle and the plasma membrane in order to establish a communication path for molecule transport or signal transmission. The development of an artificial membrane system which can mimic membrane contact sites using bottom up synthetic biology was the goal of this research study. For this, a multi - compartmentalised giant unilamellar vesicle (GUV) system was created with the membrane of the outer vesicle mimicking the plasma membrane and the inner GUVs posing as cellular organelles. In the following steps, three different strategies were used to achieve an internal membrane - membrane adhesion. N2 - Viele bedeutende Prozesse einer Zelle spielen sich an den Berührungsstellen zwischen Zellmembranen und auch zwischen Zellmembranen und der Plasmamembran ab. An diesen, aus spezifischen Lipiden und Proteinen aufgebauten Kontaktstellen, können auf Grund der geringen Entfernung Signale und auch Moleküle ausgetauscht werden. Ziel dieses Forschungsprojektes war die Entwicklung eines künstlichen Zellmembransystems, das in der Lage ist diese Kontaktstellen nachzubilden. Dafür wurden multikompartmentalisierte riesige unilamellare Vesikel (GUVs) aufgebaut. Dies bedeutet, dass sich ein GUV innerhalb eines anderen GUVs befindet. Das äußere Vesikel bildet in diesem System die Plasma Membran, während das Innere als Zellorganelle fungiert. Dieses System wird auch als Vesosom bezeichnet. Im Folgenden wurden drei verschiedene Strategien entwickelt, um interne Haftung (Adhäsion) zwischen den Membranen zu erzeugen. KW - vesicle studies KW - membrane science KW - synthetic biology KW - internal membrane-membrane adhesion KW - artificial cells KW - multi-compartmentalised vesicles KW - künstliche Zellen KW - interne Membran-Membran Adhäsion KW - Membranforschung bzw. Membranwissenschaften KW - multi-kompartmentalisierte Vesikel KW - Synthetische Biologie KW - Vesikel Forschung/Vesikel Studien Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-528428 ER - TY - GEN A1 - Lukan, Tjaša A1 - Machens, Fabian A1 - Coll, Anna A1 - Baebler, Špela A1 - Messerschmidt, Katrin A1 - Gruden, Kristina T1 - Plant X-tender BT - an extension of the AssemblX system for the assembly and expression of multigene constructs in plants T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Cloning multiple DNA fragments for delivery of several genes of interest into the plant genome is one of the main technological challenges in plant synthetic biology. Despite several modular assembly methods developed in recent years, the plant biotechnology community has not widely adopted them yet, probably due to the lack of appropriate vectors and software tools. Here we present Plant X-tender, an extension of the highly efficient, scarfree and sequence-independent multigene assembly strategy AssemblX,based on overlapdepended cloning methods and rare-cutting restriction enzymes. Plant X-tender consists of a set of plant expression vectors and the protocols for most efficient cloning into the novel vector set needed for plant expression and thus introduces advantages of AssemblX into plant synthetic biology. The novel vector set covers different backbones and selection markers to allow full design flexibility. We have included ccdB counterselection, thereby allowing the transfer of multigene constructs into the novel vector set in a straightforward and highly efficient way. Vectors are available as empty backbones and are fully flexible regarding the orientation of expression cassettes and addition of linkers between them, if required. We optimised the assembly and subcloning protocol by testing different scar-less assembly approaches: the noncommercial SLiCE and TAR methods and the commercial Gibson assembly and NEBuilder HiFi DNA assembly kits. Plant X-tender was applicable even in combination with low efficient homemade chemically competent or electrocompetent Escherichia coli. We have further validated the developed procedure for plant protein expression by cloning two cassettes into the newly developed vectors and subsequently transferred them to Nicotiana benthamiana in a transient expression setup. Thereby we show that multigene constructs can be delivered into plant cells in a streamlined and highly efficient way. Our results will support faster introduction of synthetic biology into plant science. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 990 KW - ligation cloning extract KW - DNA cloning KW - synthetic biology KW - multiple genes KW - vector system KW - transformation KW - recombination KW - protein KW - RNA KW - Methylation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-446281 SN - 1866-8372 IS - 990 ER - TY - GEN A1 - Machens, Fabian A1 - Balazadeh, Salma A1 - Müller-Röber, Bernd A1 - Messerschmidt, Katrin T1 - Synthetic Promoters and Transcription Factors for Heterologous Protein Expression in Saccharomyces cerevisiae N2 - Orthogonal systems for heterologous protein expression as well as for the engineering of synthetic gene regulatory circuits in hosts like Saccharomyces cerevisiae depend on synthetic transcription factors (synTFs) and corresponding cis-regulatory binding sites. We have constructed and characterized a set of synTFs based on either transcription activator-like effectors or CRISPR/Cas9, and corresponding small synthetic promoters (synPs) with minimal sequence identity to the host’s endogenous promoters. The resulting collection of functional synTF/synP pairs confers very low background expression under uninduced conditions, while expression output upon induction of the various synTFs covers a wide range and reaches induction factors of up to 400. The broad spectrum of expression strengths that is achieved will be useful for various experimental setups, e.g., the transcriptional balancing of expression levels within heterologous pathways or the construction of artificial regulatory networks. Furthermore, our analyses reveal simple rules that enable the tuning of synTF expression output, thereby allowing easy modification of a given synTF/synP pair. This will make it easier for researchers to construct tailored transcriptional control systems. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 393 KW - JUB1 KW - chimeric transcription factors KW - dead Cas9 KW - gene expression KW - synthetic biology KW - synthetic circuits KW - transcriptional regulation Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-403804 ER - TY - JOUR A1 - Machens, Fabian A1 - Balazadeh, Salma A1 - Müller-Röber, Bernd A1 - Messerschmidt, Katrin T1 - Synthetic Promoters and Transcription Factors for Heterologous Protein Expression in Saccharomyces cerevisiae JF - Frontiers in Bioengineering and Biotechnology N2 - Orthogonal systems for heterologous protein expression as well as for the engineering of synthetic gene regulatory circuits in hosts like Saccharomyces cerevisiae depend on synthetic transcription factors (synTFs) and corresponding cis-regulatory binding sites. We have constructed and characterized a set of synTFs based on either transcription activator-like effectors or CRISPR/Cas9, and corresponding small synthetic promoters (synPs) with minimal sequence identity to the host’s endogenous promoters. The resulting collection of functional synTF/synP pairs confers very low background expression under uninduced conditions, while expression output upon induction of the various synTFs covers a wide range and reaches induction factors of up to 400. The broad spectrum of expression strengths that is achieved will be useful for various experimental setups, e.g., the transcriptional balancing of expression levels within heterologous pathways or the construction of artificial regulatory networks. Furthermore, our analyses reveal simple rules that enable the tuning of synTF expression output, thereby allowing easy modification of a given synTF/synP pair. This will make it easier for researchers to construct tailored transcriptional control systems. KW - JUB1 KW - synthetic biology KW - transcriptional regulation KW - gene expression KW - synthetic circuits KW - dead Cas9 KW - chimeric transcription factors Y1 - 2017 U6 - https://doi.org/10.3389/fbioe.2017.00063 SN - 2296-4185 VL - 5 SP - 1 EP - 11 PB - Frontiers CY - Lausanne ER -