TY - THES A1 - Kellner, Antje T1 - Different styles of deformation of the fore-arc wedge along the Chilean convergent margin : insights from 3D numerical experiments T1 - Unterschiedliche Deformationsmuster des Fore-Arc Keils entlang des konvergenten chilenischen Plattenrandes : Einblicke aus 3D numerischen Experimenten N2 - The styles of deformation of the fore-arc wedges along the Chilean convergent margin are observed to vary significantly, despite similar plate kinematic conditions. Here, I focus on the analysis of fore-arc deformation on two regions along the Chilean convergent margin at 20°-24°S and 37°-42°S. Although both regions are subjected to the oblique subduction of the oceanic Nazca plate and backstopped by the Andes mountain chain; they display different patterns of deformation. The northern Chilean study area (20° - 24°S) is characterized by an exceptionally thick crust of about 60 km beneath the Altiplano – Puna plateau, lack of an accretionary wedge in the fore-arc due to hyperarid climate, and consequently a sediment starved trench. Two major margin parallel strike slip faults are observed in this area, the Atacama Fault Zone (AFZ) and the Precordilleran Fault System (PFS). Both strike-slip faults do not exhibit significant recent displacement. The southern study area (37° - 42°S), compared to the northern study area, is characterized by lower topography, high precipitation rates (~2000 mm/yr), and a younger subducted oceanic plate. An active strike-slip fault, the Liquiñe-Ofqui-Fault-Zone (LOFZ), shows ~1 cm/yr recent dextral movement and shapes the surface of this area. Thus, the southern Chilean study area exhibits localized strike-slip motion. Within this area the largest earthquake ever recorded, the 1960 Valdivia earthquake, occurred with a moment magnitude of MW=9.5. I have constructed 2D thermal models and 3D mechanical models for both Chilean study areas to study processes related to active subduction. The applied numerical method is the finite element technique by means of the commercial software package ABAQUS. The thermal models are focused on the thermal conditions along the plate interface. The thermal structure along the plate interface reveals the limits of coupling but also the type of transition from coupled to uncoupled and vice versa. The model results show that shear heating at the plate interface is an important mechanism that should be taken into account. The models also show that the thermal condition at the downdip limit of the coupling zone leads to a sharp decrease of friction along the interface. Due to the different geometries of the two Chilean study areas, such as the slab dip and the thickness of the continental crust, the downdip limit of the southern study area is slightly shallower than that of the northern study area. The results of the 2D thermal models are used to constrain the spatial extent of the coupling zone in the 3D mechanical models. 3D numerical simulations are used to investigate how geometry, rheology and mechanical parameters influence strain partitioning and styles of deformation in the Chilean fore-arc. The general outline of the models is based on the fore-arc geometry and boundary conditions as derived from geophysical and geological field data. I examined the influence of different rheological approaches and varying physical properties of the fore-arc to identify and constrain the parameters controlling the difference in surface deformation between the northern and southern study area. The results of numerical studies demonstrate that a small slab dip, a high coefficient of basal friction, a high obliquity of convergence, and a high Young’s modulus favour localisation of deformation in the fore-arc wedge. This parameter study helped me to constrain preferred models for the two Chilean study areas that fit to first order observations. These preferred models explain the difference in styles of deformation as controlled by the angle of obliquity, the dip of subducting slab, and the strength of wedge material. The difference in styles can be even larger if I apply stronger coupling between plates within the southern area; however, several independent observations indicate opposite tendency showing southward decrease of intensity of coupling. The weaker wedge material of the preferred model for the northern study area is associated with advanced development of the adjacent orogen, the Central Andes. Analysis of world-wide examples of oblique subduction zones supports the conclusion that more mature subduction zones demonstrate less pronounced localization of strike-slip motion. N2 - Die Deformationsmuster der Fore-Arc Keile entlang des chilenischen konvergenten Plattenrandes variieren beachtlich, trotz ähnlicher plattenkinematischer Randbedingungen. In dieser Arbeit konzentriere ich mich auf die Analyse der Deformation des Fore-Arcs in zwei Gebieten entlang des chilenischen konvergenten Plattenrandes zwischen 20°-24°S und 37°-42°S. Obwohl beide Gebiete durch schiefe Subduktion der ozeanischen Nazca Platte und der östlichen Begrenzung durch die Andine Gebirgskette gekennzeichnet sind, zeigen sie unterschiedliche Deformationsmuster an der Oberfläche. Das nördliche chilenische Gebiet (20° - 24°S) ist gekennzeichnet durch eine außergewöhnliche Krustendicke von ~ 60 km unterhalb des Altiplano - Puna Plateaus, dem Fehlen eines akkretionären Prismas im Fore-Arc aufgrund des trockenen Klimas und somit einer nahezu sedimentfreien Tiefseerinne. Zwei große Plattenrand-parallele Strike-Slip Störungen werden in diesem Gebiet beobachtet, die Atacama Fault Zone (AFZ) und das Precordilleran Fault System (PFS). Beide Strike-Slip Störungen zeigen keine signifikanten aktuellen Bewegungsraten. Das südliche Gebiet (37° - 42°S) ist im Vergleich zum nördlichen Gebiet durch eine niedrigere Topographie, hohe Niederschlagsraten (~2000 mm/a) und eine jüngere abtauchende ozeanische Platte gekennzeichnet. Die aktive Strike-Slip Störung, Liquiñe-Ofqui-Fault-Zone (LOFZ), ist gekennzeichnet durch aktuelle dextrale Bewegungsraten von 1 cm/a und prägt die Oberflächenstruktur in dieser Region. Folglich ist der südliche Arbeitsbereich durch lokalisierte Strike-Slip Bewegung charakterisiert. Innerhalb dieses Gebietes ereignete sich das größte instrumentell aufgezeichnete Erdbeben, das 1960 Valdivia Erdbeben, mit einer Stärke von MW=9.5. 2D thermische Modelle und 3D mechanische Modelle wurden für die beiden chilenischen Gebiete konstruiert, um Prozesse im Zusammenhang mit aktiver Subduktion zu untersuchen. Als numerisches Verfahren wurde die Finite Elemente Methode mit Hilfe des kommerziellen Softwarepakets ABAQUS angewandt. Die thermischen Modelle sind auf die thermischen Konditionen entlang der Plattengrenzfläche fokussiert. Die thermische Struktur entlang der Plattengrenzfläche zeigt die Grenzen der Kopplung an aber auch die Art des Überganges von gekoppelt zu nicht gekoppelt und umgekehrt. Die Modellergebnisse zeigen, dass Heizen infolge der Scherung an der Plattengrenzfläche ein wichtiger Faktor ist, der in Betracht gezogen werden sollte. Die Modelle zeigen auch, dass die thermische Struktur an der unteren Begrenzung der Koppelzone zu einer deutlichen Abnahme der Reibung entlang der Grenzfläche führt. Aufgrund der unterschiedlichen Geometrien der zwei chilenischen Untersuchungsgebiete, z.B. Abtauchwinkel der ozeanischen Platte und Krustendicke, ist die untere Begrenzung der Koppelzone des südlichen Untersuchungsgebietes in geringerer Tiefe als die des nördlichen Gebietes. Die Ergebnisse der thermischen 2D Modelle werden genutzt, um die räumliche Ausdehnung der Koppelzone in den mechanischen 3D Modellen festzulegen. Numerische 3D Simulationen werden genutzt, um zu verstehen, wie Geometrien, Rheologien und mechanische Parameter die Verformungspartitionierung und das Deformationsmuster im chilenischen Fore-Arc beeinflussen. Ich habe den Einfluss unterschiedlicher rheologischer Ansätze und unterschiedlicher physikalischer Eigenschaften auf den Fore-Arc untersucht, um Parameter zu identifizieren und zu bestimmen, die den Unterschied des Deformationsmusters zwischen dem nördlichen und südlichen Gebiet steuern. Die Ergebnisse der numerischen Studien stellen heraus, dass ein kleinerer Abtauchwinkel der ozeanischen Platte, ein hoher basaler Reibungskoeffizient, eine hohe Konvergenzschiefe und ein großer Elastizitätsmodul die Lokalisierung der Deformation im Fore-Arc Keil begünstigen. Basierend auf dieser Parameterstudie habe ich Modelle für die beiden chilenischen Gebiete ausgewählt, die in Beobachtungen erster Ordnung übereinstimmen. Diese ausgewählten Modelle erklären die unterschiedlichen Deformationsmuster durch eine größere Konvergenzschiefe, einen kleineren Abtauchwinkel der ozeanischen Platte und ein härteres Keilmaterial für das südliche Untersuchungsgebiet. Der Unterschied bezüglich der Deformationsmuster kann sogar größer sein, wenn ich eine größere Reibung zwischen den Platten im südlichen Gebiet anwende; jedoch zeigen einige unabhängige Beobachtungen eine umgekehrte Tendenz: eine Abnahme der Intensität der Koppelung von Nord nach Süd. Das schwächere Keilmaterial des ausgewählten Modells für das nördliche Untersuchungsgebiet steht im Zusammenhang mit der fortgeschrittenen Entwicklung des angrenzenden Orogens, der zentralen Anden. Die Analyse weltweiter Beispiele von schiefen Subduktionzonen unterstützt die Schlussfolgerung, dass ältere Subduktionzonen weniger ausgeprägte Lokalisierung von Strike-Slip Bewegung aufzeigen. KW - Fore-Arc KW - chilenische Anden KW - Subduktionszone KW - numerische Modelle KW - Strike-Slip Störungen KW - fore-arc KW - Chilean Andes KW - subduction zone KW - numerical models KW - strike-slip faults Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15898 ER - TY - THES A1 - Vásquez Parra, Mónica Fernanda T1 - Mafic magmatism in the Eastern Cordillera and Putumayo Basin, Colombia : causes and consequences T1 - Mafischer Magmatismus in der östlichen Kordilliere und des Putumayo Beckens, Kolumbien : Gründe und Folgen N2 - The Eastern Cordillera of Colombia is mainly composed of sedimentary rocks deposited since early Mesozoic times. Magmatic rocks are scarce. They are represented only by a few locally restricted occurrences of dykes and sills of mafic composition presumably emplaced in the Cretaceous and of volcanic rocks of Neogene age. This work is focused on the study of the Cretaceous magmatism with the intention to understand the processes causing the genesis of these rocks and their significance in the regional tectonic setting of the Northern Andes. The magmatic rocks cut the Cretaceous sedimentary succession of black shales and marlstones that crop out in both flanks of the Eastern Cordillera. The studied rocks were classified as gabbros (Cáceres, Pacho, Rodrigoque), tonalites (Cáceres, La Corona), diorites and syenodiorites (La Corona), pyroxene-hornblende gabbros (Pacho), and pyroxene-hornblendites (Pajarito). The gabbroic samples are mainly composed of plagioclase, clinopyroxene, and/or green to brown hornblende, whereas the tonalitic rocks are mainly composed of plagioclase and quartz. The samples are highly variable in crystal sizes from fine- to coarse-grained. Accessory minerals such as biotite, titanite and zircon are present. Some samples are characterized by moderate to strong alteration, and show the presence of epidote, actinolite and chlorite. Major and trace element compositions of the rocks as well as the rock-forming minerals show significant differences in the geochemical and petrological characteristics for the different localities, suggesting that this magmatism does not result from a single melting process. The wide compositional spectrum of trace elements in the intrusions is characteristic for different degrees of mantle melting and enrichment of incompatible elements. MORB- and OIB-like compositions suggest at least two different sources of magma with tholeiitic and alkaline affinity, respectively. Evidence of slab-derived fluids can be recognized in the western part of the basin reflected in higher Ba/Nb and Sr/P ratios and also in the Sr radiogenic isotope ratios, which is possible a consequence of metasomatism in the mantle due to processes related to the presence of a previously subducted slab. The trace element patterns evidence an extensional setting in the Cretaceous basin producing a continental rift, with continental crust being stretched until oceanic crust was generated in the last stages of this extension. Electron microprobe analyses (EMPA) of the major elements and synchrotron radiation micro-X-ray fluorescence (μ-SRXRF) analyses of the trace element composition of the early crystallized minerals of the intrusions (clinopyroxenes and amphiboles) reflect the same dual character that has been found in the bulk-rock analyses. Despite the observed alteration of the rocks, the mineral composition shows evidences for an enriched and a relative depleted magma source. Even the normalization of the trace element concentrations of clinopyroxenes and amphiboles to the whole rock nearly follows the pattern predicted by published partition coefficients, suggesting that the alteration did not change the original trace element compositions of the investigated minerals. Sr-Nd-Pb isotope data reveal a large isotopic variation but still suggest an initial origin of the magmas in the mantle. Samples have moderate to highly radiogenic compositions of 143Nd/144Nd and high 87Sr/86Sr ratios and follow a trend towards enriched mantle compositions, like the local South American Paleozoic crust. The melts experienced variable degrees of contamination by sediments, crust, and seawater. The age corrected Pb isotope ratios show two separated groups of samples. This suggests that the chemical composition of the mantle below the Northern Andes has been modified by the interaction with other components resulting in a heterogeneous combination of materials of diverse origins. Although previous K/Ar age dating have shown that the magmatism took place in the Cretaceous, the high error of the analyses and the altered nature of the investigated minerals did preclude reliable interpretations. In the present work 40Ar/39Ar dating was carried out. The results show a prolonged history of magmatism during the Cretaceous over more than 60 Ma, from ~136 to ~74 Ma (Hauterivian to Campanian). Pre-Cretaceous rifting phases occurred in the Triassic-Jurassic for the western part of the basin and in the Paleozoic for the eastern part. Those previous rifting phases are decisive mechanisms controlling the localization and composition of the Cretaceous magmatism. Therefore, it is the structural position and not the age of the intrusions which preconditions the kind of magmatism and the degree of melting. The divergences on ages are the consequence of the segmentation of the basin in several sub-basins which stretching, thermal evolution and subsidence rate evolved independently. The first hypothesis formulated at the beginning of this investigation was that the Cretaceous gabbroic intrusions identified in northern Ecuador could be correlated with the intrusions described in the Eastern Cordillera. The mafic occurrences should mark the location of the most subsiding places of the large Cretaceous basin in northern South America. For this reason, the gabbroic intrusions cutting the Cretaceous succession in the Putumayo Basin, southern Colombia, were investigated. The results of the studies were quite unexpected. The petrologic and geochemical character of the magmatic rocks indicates subduction-related magmatism. K/Ar dating of amphibole yields a Late Miocene to Pliocene age (6.1 ± 0.7 Ma) for the igneous event in the basin. Although there is no correlation between this magmatic event and the Cretaceous magmatic event, the data obtained has significant tectonic and economic implications. The emplacement of the Neogene gabbroic rocks coincides with the late Miocene/Pliocene Andean orogenic uplift as well as with a significant pulse of hydrocarbon generation and expulsion. N2 - Die östliche Kordilliere Kolumbiens besteht hauptsächlich aus sedimentären Gesteinen, die seit dem frühen Mesozoikum angelagert wurden. Magmatische Gesteine sind rar und zeigen sich nur in Form von mafischen Gängen und Lagen die in kreidezeitliches Gestein intrudierten. Diese Arbeit untersucht den kretazischen Magmatismus um die Prozesse zu verstehen, die die Bildung dieser Gesteine ermöglichte. Die magmatischen Gesteine durchschlagen die kretazischen sedimentären Einheiten aus schwarzen Schiefern und Mergeln, die auf beiden Seiten der östlichen Kordilliere aufgeschlossen sind. Die untersuchten Gesteine wurden als Gabbros (Cáceres, Pacho, Rodrigoque), Tonalite (Cáceres, La Corona), Diorite und syenitische Diorite (La Corona), Pyroxen-Hornblende Gabbros (Pacho) und Pyroxen-Hornblendite eingestuft. Die gabbroiden Proben bestehen hauptsächlich aus Plagioklas, Klinopyroxen und/ oder grüner und brauner Hornblende. Die Tonalite sind aus Plagioklas und Quarz zusammengesetzt. Die Proben sind im Bezug auf ihre Kristallgröße sehr variabel. Biotit, Titanit und Zirkon sind in Form von Akzessorien enthalten. Die Proben sind mäßig bis stark überprägt. Diese enthalten zusätzlich Epidot, Aktinolit und Chlorit. Die Haupt- und Nebenelementzusammensetzung der Gesteine wie die Mineralassoziation an sich zeigen deutliche Unterschiede abhängig von der jeweiligen Lokalität. Das deutet auf mehrere Schmelzprozesse die zur Bildung der magmatischen Gesteine führten. Das breite Spektrum an Spurenelementen in den Intrusionen ist charakteristisch für verschiedene Grade der Mantelaufschmelzung und der Anreicherung dieser Schmelzen mit inkompatiblen Elementen. MORB und OIB Zusammensetzungen deuten auf mindestens zwei verschiedene Quellen des tholeiitischen und alkalinen Magmas hin. Im westlichen Teil des Kreidebeckens weisen höhere Ba/Nd und Sr/P Verhältnisse auf subduktionsinduzierte Fluide hin, die eventuell eine Metasomatose des Mantels nach sich zog. Die Verhältnisse der radiogenen Isotope von Sr spiegeln ebenfalls einen Fluideintrag wieder. Aufgrund der Spurenelementmuster kann davon ausgegangen werden, dass im kretazischen Becken extensionale Bewegungen zu einer Ausdünnung der kontinentalen Kruste führte bis im letzten Stadium ozeanische Kruste generiert wurde. Mikrosondenanalysen (EMPA) der Hauptelemente und Röntgenfluoreszenzanalyse mittels Synchrotonstrahlung (μ-SRXRF) der Spurenelemente von früh kristallisierten Mineralen der Intrusionen (Klinopyroxene und Amphibole) reflektieren den selben dualen Charakter wie die Gesamtgesteinsanalysen. Trotz Überprägung mancher Gesteine zeigen die Mineralkompositionen sowohl eine angereicherte als auch eine relativ verarmte Magmaquelle. Durch die Normalisierung der Spurenelemente von Klinopyroxen und Amphibol zum Gesamtgestein konnte gezeigt werden, dass die Überprägung keine Auswirkung auf die originalen Spurenelementkompositionen hatte. Sr-Nd-Pb Daten zeigen eine große Variationsbreite in den Isotopen, trotzdem ist noch der Mantel als initiale Quelle des Magmas sichtbar. Die Proben zeigen mäßige bis hohe radiogene Mengen an 143Nd/144Nd und hohe Verhältnisse von 87Sr/86Sr. Beides spricht für angereicherten Mantel als Ausgangsmaterial der mafischen Intrusiva. Sedimente, Kruste und Meerwasser kontaminieren das Gestein in variablen Anteilen. Korrigierte Pb Isotopenverhältnisse zeigen zwei unterschiedliche Probengruppen. Damit kann vermutet werden, dass die Chemie des Mantels unter den nördlichen Anden durch Interaktionen mit anderen Komponenten modifiziert wurde und so ein heterogenes Material entstand. Frühere K/Ar Datierungen zeigen, dass die Intrusionen der mafischen Gesteine in der Kreide erfolgten. Aufgrund des hohen Fehlers in den Analysen und den Alterationen an den untersuchten Mineralien, sollten derartige Interpretationen mit Vorsicht betrachtet werden. Diese Arbeit zeigt anhand von Ar/Ar Daten, dass sich der Zeitraum der magmatischen Ereignisse über 60Ma hinzieht. Es wurden Alter von 136 Ma bis 74 Ma ermittelt (Hauterivium/Campanium). Extensionsprozesse traten im östlichen Teil des Kreidebeckens bereits im Paleozoikum auf, der westliche Teil wurde an der Trias-Jura-Grenze von der Entwicklung erfasst. Diese frühen Riftprozesse haben maßgeblichen Einfluss auf die Lokalität und Komposition des kretazischen Magmatismus. Daher ist die strukturelle Position und nicht das Alter ausschlaggebend, wenn es um die Art des Magmatismus und den Grad der Aufschmelzung des Mantels geht. Die Spannbreite der ermittelten Alter steht im Zusammenhang mit der Segmentierung des Beckens. Diese Subbecken zeigen eine unterschiedliche thermische Entwicklung sowie eine unabhängige Evolution in Extension und Subsidenz. Eine erste Hypothese die zu Beginn der Arbeit formuliert wurde, ging davon aus, dass die kretazischen gabbroiden Intrusionen im nördlichen Equador mit den Intrusionen in der östlichen Kordilliere korrelierbar sind. Die mafischen Gesteine definieren ein Areal des nördlichen Südamerika, dass wohl die größte Subsidenz erfahren hat. Darum wurden die gabbroiden Gänge in den kretazischen Abfolgen des Putumayo Beckens, Süd-Kolumbien, erforscht. Diese Arbeit zeigt neue Resultate und Ergebnisse, die so nicht erwartet wurden. Der petrologische und geochemische Charakter der Magmatite zeigt subduktionsbezogenen Magmatismus. K/Ar Datierungen von Amphibolen zeigen ein spates Miozänes bis Pliozänes Alter (6.1 ± 0.7 Ma) für das Intrusionsereignis im Kreidebecken. Obwohl es keine Korrelation zwischen diesem magmatischen Ereignis und dem Kretazischen gibt, zeigen die Daten doch tektonische und ökonomische Zusammenhänge auf. Die Intrusion der neogenen Gabbroide überschneidet sich mit der späten miozänen/pliozänen andinen Hebung ebenso wie mit der signifikanten Bildung von Kohlenwasserstoffen und deren Einlagerung. KW - Kolumbien KW - Magmatismus KW - Kreide KW - Geochemie KW - Anden KW - Colombia KW - magmatism KW - Cretaceous KW - geochemistry KW - Andes Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-13183 ER - TY - THES A1 - Melnick, Daniel T1 - Neogene seismotectonics of the south-central Chile margin : subduction-related processes over various temporal and spatial scales T1 - Neogene Seismotektonik des süd-zentralen chilenischen aktiven Plattenrandes : Subduktionsprozesse in unterschiedlichen Zeit- und Raumskalen N2 - The Andean orogen is the most outstanding example of mountain building caused by the subduction of oceanic below continental lithosphere. The Andes formed by the subduction of the Nazca and Antarctic oceanic plates under the South American continent over at least ~200 million years. Tectonic and climatic conditions vary markedly along this north-south–oriented plate boundary, which thus represents an ideal natural laboratory to study tectonic and climatic segmentation processes and their possible feedbacks. Most of the seismic energy on Earth is released by earthquakes in subduction zones, like the giant 1960, Mw 9.5 event in south-central Chile. However, the segmentation mechanisms of surface deformation during and between these giant events have remained poorly understood. The Andean margin is a key area to study seismotectonic processes because of its along-strike variability under similar plate kinematic boundary conditions. Active deformation has been widely studied in the central part of the Andes, but the south-central sector of the orogen has gathered less research efforts. This study focuses on tectonics at the Neogene and late Quaternary time scales in the Main Cordillera and coastal forearc of the south-central Andes. For both domains I document the existence of previously unrecognized active faults and present estimates of deformation rates and fault kinematics. Furthermore these data are correlated to address fundamental mountain building processes like strain partitioning and large-scale segmentation. In the Main Cordillera domain and at the Neogene timescale, I integrate structural and stratigraphic field observations with published isotopic ages to propose four main phases of coupled styles of tectonics and distribution of volcanism and magmatism. These phases can be related to the geometry and kinematics of plate convergence. At the late Pleistocene timescale, I integrate field observations with lake seismic and bathymetric profiles from the Lago Laja region, located near the Andean drainage divide. These data reveal Holocene extensional faults, which define the Lago Laja fault system. This fault system has no significant strike-slip component, contrasting with the Liquiñe-Ofqui dextral intra-arc system to the south, where Holocene strike-slip markers are ubiquitous. This contrast in structural style along the arc is coincident with a marked change in along-strike fault geometries in the forearc, across the Arauco Peninsula. Thereon I propose that a net gradient in the degree of partitioning of oblique subduction occurs across the Arauco transition zone. To the north, the margin parallel component of oblique convergence is distributed in a wide zone of diffuse deformation, while to the south it is partitioned along an intra-arc, margin-parallel strike-slip fault zone. In the coastal forearc domain and at the Neogene timescale, I integrate structural and stratigraphic data from field observations, industry reflection-seismic profiles and boreholes to emphasize the influence of climate-driven filling of the trench on the mechanics and kinematics of the margin. I show that forearc basins in the 34-45°S segment record Eocene to early Pliocene extension and subsidence followed by ongoing uplift and contraction since the late Pliocene. I interpret the first stage as caused by tectonic erosion due to high plate convergence rates and reduced trench fill. The subsequent stage, in turn, is related to accretion caused by low convergence rates and the rapid increase in trench fill after the onset of Patagonian glaciations and climate-driven exhumation at ~6-5 Ma. On the late Quaternary timescale, I integrate off-shore seismic profiles with the distribution of deformed marine terraces from Isla Santa María, dated by the radiocarbon method, to show that inverted reverse faulting controls the coastal geomorphology and segmentation of surface deformation. There, a cluster of microearthquakes illuminates one of these reverse faults, which presumingly reaches the plate interface. Furthermore, I use accounts of coseismic uplift during the 1835 M>8 earthquake made by Charles Darwin, to propose that this active reverse fault has been mechanically coupled to the megathrust. This has important implications on the assessment of seismic hazards in this, and other similar regions. These results underscore the need to study plate-boundary deformation processes at various temporal and spatial scales and to integrate geomorphologic, structural, stratigraphic, and geophysical data sets in order to understand the present distribution and causes of tectonic segmentation. N2 - Die Anden sind eine einzigartige Gebirgskette entstanden aus der Subduktion von ozeanischer unter kontinentale Lithosphäre. Seit mehr als 200 Millionen Jahren bewirkt die Subduktion der ozeanischen Nazca- und Antarktisplatte unter den Südamerikanischen Kontinent eine stete Entwicklung des aktiven Plattenrandsystems. Entlang der Plattengrenze ändern sich die tektonischen und klimatischen Bedingungen in markanter Weise und machen dieses Orogen zu einem idealen natürlichen Laboratorium für das Studium tektonischer und klimatischer Prozesse und deren rückgekoppelte Wechselwirkungen. Der grösste Teil der seismischen Energie auf der Erde wird durch Erdbeben an Subduktionszonen freigesetzt, wie das spektakulärste Beispiel des Valdivia-Bebebens von 1960 im süd-zentral chilenischen Küstenbereich – mit Mw 9,5 das stärkste je gemessene seismische Ereignis, unterstreicht. Die Verteilungsmechanismen der Oberflächendeformation während und zwischen solchen gewaltigen Vorgängen blieben jedoch weitgehend unverstanden. Wegen seiner im Streichen veränderlichen Eigenschaften bei ähnlich bleibenden plattenkinematischen Randbedingungen nimmt die Subduktionszone des Anden-Orogens eine Schlüsselstellung für das Studium seismotektonischer Segmentationsprozesse ein. Aktive Deformationsprozesse sind im zentralen Teil der Anden in grösserem Umfang untersucht worden, während der mittlere bis südliche Abschnitt des Orogens bisher weniger Bearbeitung fand. Die vorliegende Arbeit ist auf die seismotektonischen Prozesse des Neogen und Spätquartärs in der Hauptkordillere und dem Küstenbereich der südlichen Zentralanden konzentriert. In beiden Strukturzonen kann die Existenz bisher nicht bekannter aktiver Störungen belegt werden und es werden Abschätzungen der Deformationsraten sowie der Kinematik präsentiert. Diese Daten bilden desweiteren die Basis, um Aussagen zu grundlegenden gebirgsbildenden Prozessen, der Verformungsverteilung und der gross-skaligen Segmentation zu treffen. Für das Neogen im untersuchten Abschnitt der Hauptkordillere sind strukturelle und stratigraphische Geländebeobachtungen durch publizierte Isotopendaten ergänzt worden, so dass vier Hauptphasen mit jeweils spezifischem tektonischen Stil und Verteilungsmustern von Vulkanismus und Magmatismus unterschieden werden können. Auf der spätpleistozänen Zeitskala sind die Geländebeobachtungen mit seismischen und bathymetrischen Seeprofilen aus der Lago-Laja-Region kombiniert worden, die sich nahe der Wasserscheide der Anden befinden. Diese Daten belegen extensionale holozäne Störungen, die das Lago-Laja-Störungssystem bestimmen. Im Gegensatz zum dextralen Liquiñe-Ofqui-System im Süden, wo holozäne, dextrale Blattverschiebungen allgegenwärtig sind, besitzt dieses Störungssystem keine signifikante Blattverschiebungskomponente. Dieser Kontrast entlang der Kordilliere fällt mit einer markanten Änderung der Störungsmuster im Forearc zusammen. Im Norden verteilt sich die randparallele Komponente der schrägen Subduktion auf eine breite Zone diffuser Verformung, während sie im Süden entlang einer Intra-arc- und randparallelen Blattverschiebungszone partitioniert auftritt. Im Küstenbereich werden Struktur- und stratigraphische Daten aus Geländebeobachtungen mit reflektionsseismischen Profilen und Bohrlochmessdaten verbunden, um Information zum Einfluss einer klimatisch-gesteuerten Auffüllung des Grabens auf die Mechanismen und die Kinematik des Randes während des Neogen zu erhalten. Es zeigt sich, dass Forearc-Becken im Segment bei 34–45° S eozäne bis frühpliozäne Dehnung und Subsidenz aufzeigen, denen spätpliozäne und noch aktive Hebung und Verkürzung folgten. Das erste Stadium kann mit tektonischer Erosion infolge hoher Plattenkonvergenzraten und geringerer Grabenfüllung erklärt werden. Das nachfolgende Stadium hingegen ist mit Akkretionsprozessen zu erklären, die durch geringe Konvergenzraten und gesteigerte Grabenauffüllung nach dem Einsetzen der Patagonischen Vereisung und klimagesteuerter Exhumierung vor etwa 6–5 Ma verursacht wurden. Auf der spätpleistozänen Zeitebene werden seismische Profile mit der Oberflächenentwicklung aus deformierten, 14C-datierten, marinen Terrassen der Isla Santa María integriert und gezeigt dass die Küstenmorphologie und die Segmentation der Oberflächendeformation von Aufschiebungen kontrolliert werden. In diesem Gebiet zeichnet ein Cluster von Mikrobeben eine dieser Störungen, die vermutlich die Plattengrenzfläche erreicht, deutlich nach. Desweiteren zeigen Berechnungen der koseismischen Hebung während des Erdbebens von 1835 mit M>8 nach Aufzeichnungen von Charles Darwin, dass diese aktive Verwerfung mechanisch an die Subduktionszone gekoppelt war und durch das Ereignis von 1835 aktiviert wurde. Diese Erkenntnisse haben grosse Bedeutung für die Abschätzung der seismischen Gefährdung in der Region. Die gewonnenen Ergebnisse dieser Arbeit unterstreichen den Bedarf an integrierten Untersuchungen der Deformationsprozesse an aktiven Plattenrändern in verschiedenen Zeit- und Raumskalen, ebenso wie die Notwendigkeit, diese mit geomorphologischen, strukturellen und geophysikalischen Datensätzen zu verknüpfen, um einen Beitrag zum Verständnis der gegenwärtigen Verteilung und Ursachen der tektonischen Segmentation sowie der Gefährdungsabschätzung zu leisten. KW - Seismotektonik KW - Chile KW - neogene KW - seismotectonics KW - Chile Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12091 ER - TY - THES A1 - Rößler, Dirk T1 - Retrieval of earthquake source parameters in inhomogeneous anisotropic mediawith application to swarm events in West Bohemia in 2000 T1 - Bestimmung von Erdbebenparametern in inhomogenen anisotropen Medien mit Anwendung auf Schwarmbeben im Vogtland im Jahr 2000 N2 - Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting. N2 - Erdbeben entstehen durch plötzlichen Sprödbruch des Gesteins, meist als Scherbruch entlang einer Bruchfläche. Daneben werden für einige Beben v.a. in vulkanischen Gebieten auch Mechanismen beobachtet, die scheinbar vom Modell des Scherbruches abweichen. Ursachen dafür beinhalten komplexe Bruchgeometrien und tensile Erdbeben. Bei tensilen Erdbeben kommt es während des Bruchs zum Öffnen oder Schließen der Bruchfläche und damit zu Volumenänderungen. Erdbeben mit tensilen Anteilen stehen wahrscheinlich oft im Zusammenhang mit Fluiden, welche zur Durckänderung im Porenraum von Gesteinen und damit zum Auslösen des Bebens führen. Sie wurden auch im Vogtland während eines Erdbebenschwarms im Jahr 1997 beobachtet. Die Beurteilung und sichere Bestimmung tensiler Anteile von Erdbeben sind Ziel und Gegenstand dieser Arbeit. Bei Standardverfahren zur Bestimmung von Erdbebenmechanismen werden isotrope Gesteinseigenschaften angenommen. Momententensoren beschreiben dabei Kräfte, die das abgestrahlte Wellenfeld erklären. Allerdings wird seismische Anisotropie, d.h. Richtungsabhängigkeit elastischer Eigenschaften, in der Erdkruste und im Mantel wie z.B. im Vogtland beobachtet. Anisotropie bewirkt im Vergleich zu isotropen Medien Veränderungen der Wellenamplituden und -polariserungen sowie das Aufspalten von Scherwellen. In der vorliegenden Arbeit werden daher der Einfluss seismischer Anisotropie auf wahre oder scheinbar auftretende tensile Quellanteile untersucht und Erdbebenmechanismen unter Berücksichtigung seismischer Anisotropie bestimmt. Es wird gezeigt, dass Momententensoren und Abstrahlmuster von Scherbrüchen in anisotropen Medien denen von tensilen Brüchen in isotropen Medien ähneln können. Umgekehrt treten Ähnlichkeiten tensiler Beben in anisotropen Gesteinen mit Scherbrüchen in isotropen Medien auf. Damit existieren Mehrdeutigkeiten beobachteter tensiler Quellanteile. Die Effekte von Anisotropie hängen von der Orientierung des Bruches und vom Grad der Anisotropie ab. Außerdem beeinflusst Anisotropie das Moment eines Bebens. Herdflächenorientierungen können auch dann verlässlich bestimmt werden, wenn man Isotropie statt Anisotropie annimmt und die Spektren von Kompressionswellen verwendet. Bei Hinzunahme der Spektren von Scherwellen können Uneindeutigkeiten auftreten. Abgeleitete Momententensoren zeigen systematische Artefakte. Beobachtungen tensiler Quellanteile von Beben im Vogtland im Jahr 1997 können nicht allein durch moderate Anisotropie erklärt werden. Weiterhin wurden früher bestimmte Momententensoren induzierter Beben nahe der Kontinentalen Tiefbohrung, Bayern, unter Annahme anisotroper Parameter reinterpretiert. Die Beben werden einheitlich als Scherbrüche charakterisiert, obwohl deren Momententensoren tensile Bestandteile enthalten, die als scheinbar angesehen werden. Die Resultate unterstreichen die Notwendigkeit, seismische Anisotropie zu berücksichtigen, um tensile Komponenten von Erdbeben eindeutig zu bestimmen. Ein daher neu entwickelter Inversionsalgorithmus wurde getestet und erfolgreich auf 112 Erdbeben der letzten intensiven Schwarmepisode im Jahr 2000 im Vogtland an der deutsch-tschechischen Grenze angewandt. Die Herdparameter wurden unter Verwendung isotroper und anisotroper Geschwindigkeitsmodelle ermittelt. Die Beben zeigen Lokalmagnituden zwischen 1,6 und 3,2. Sie weisen zueinander ähnliche Herdflächenlösungen mit linkslateralem Versatz auf steil einfallenden, etwa Nord-Süd orientierten Bruchflächen auf. Die Fallwinkel nehmen oberhalb 8,4km Tiefe ab. Für über 60% der betrachteten Erdbeben werden tensile Quellanteile mit Volumenvergrößerung beobachtet. Die tensilen Komponenten zeigen Abhängigkeiten von Herdzeit und -ort. Sie sind zu Beginn des Schwarms sowie in Tiefen unterhalb 8,4km besonders signifikant und nehmen später an Bedeutung ab. Abgeleitete Hauptspannungsachsen enthalten P Achsen mit nordwestlicher und T Achsen mit südwestlicher Streichrichtung. Sie ähneln denen in Mitteleuropa. Es werden tiefenabhängige Fallwinkel beobachtet. Die Änderungen erfolgen für die P Achsen graduell von 50° hin zu flacheren Fallwinkeln bei tieferen Beben. Sie erfolgen jedoch abrupt für die T Achsen von etwa 8° oberhalb einer Tiefe von etwa 8,4km zu 21° einfallend unterhalb dessen. Mit dieser Arbeit werden erstmals zeitliche und räumliche Veränderungen tensiler Quellanteile und Spannungszustände im Vogtland für Erdbeben im Jahr 2000 beobachtet. Diese haben auch dann Bestand, wenn seismische Anisotropie berücksichtigt wird. Sie können durch Fluide erklärt werden, die in die Bruchflächen eindringen. KW - Seismologie KW - Momententensor KW - Anisotropie KW - Erdbeben KW - Wellenausbreitung KW - Vogtland KW - Schwarmbeben KW - tensile Anteile KW - Hauptspannungsachse KW - earthquake swarm KW - anisotropy KW - tensile earthquakes KW - moment tensor KW - West Bohemia Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7758 ER - TY - THES A1 - Hultzsch, Nadja T1 - Lakustrine Sedimente als Archive des spätquartären Umweltwandels in der Amery-Oase, Ostantarktis T1 - The Late Quaternary climatic and environmental history of Amery Oasis, East Antarctica N2 - Im Rahmen einer deutsch-australischen Forschungskooperation erfolgte im Südsommer 2001/2002 eine Expedition in die Amery-Oase (70°50’S, 68°00’E), die im Einzugsgebiet des Lambert-Gletscher/Amery-Schelfeis-Systems, dem größten ostantarktischen Eis-Drainagesystem, liegt. Von deutscher Seite wurden im Zuge der Geländekampagne erstmals lakustrine Sedimentsequenzen gewonnen, um die bislang wenig erforschte spätquartäre Klima- und Umweltgeschichte dieser rund 1800 km2 großen eisfreien Region zu rekonstruieren. Die drei untersuchten Glazialseen Beaver, Radok und Terrasovoje unterscheiden sich sowohl deutlich in ihrer Größe, Bathymetrie und den hydrologischen Merkmalen sowie in ihren Sedimentabfolgen. Einen Schwerpunkte dieser Doktorarbeit bildet die Rekonstruktion der Sedimentationsprozesse und des Ablagerungsmilieus sowie Untersuchungen zur Herkunft des detritischen Sedimentmaterials in den Seebecken. Der methodische Ansatz verfolgt die Charakterisierung der klastischen Sedimentfazies an Hand lithologisch-granulometrischer Merkmale sowie mineralogisch-geochemischer Analysen der Sedimentherkunft. Ein weiterer Schwerpunkt ist die Rekonstruktion der holozänen biogen gesteuerten Ablagerungsbedingungen im Terrasovoje-See, die Rückschlüsse auf den kurzfristigen postglazialen Klima- und Umweltwandel in der Amery-Oase gestattet. Dabei wurden mikrofazielle Untersuchungsmethoden und hochauflösende Elementscannermessungen angewandt. Die klastische Sedimentherkunft in den drei Seen unterscheidet sich räumlich deutlich voneinander und spiegelt den komplexen geologischen Aufbau der Amery-Oase wider. Als Sedimentquellen konnten präkambrische Metamorphite, permotriassische Sedimentgesteine und tertiäre Lockersedimente identifiziert werden. Die Varibilität der Herkunftssignale ist zeitlich weniger deutlich als räumlich ausgeprägt und deutet auf relativ konstante Liefergebiete in den einzelnen Seen hin. Das glaziolakustrine Ablagerungsmilieu der drei untersuchten Seen zeigt klare räumliche und zeitliche Unterschiede. In allen drei Seen setzen sich die älteren Sedimente aus grobkörnigem, häufig diamiktischem Material zusammen, während die jüngeren Sedimente aus feinkörnigen Laminiten bestehen. Die lithofazielle Zweiteilung in den Sedimentabfolgen deutet auf einen Rückzug der Gletscher und/oder einen Anstieg der Wassertiefen im Übergang von den grobkörnigen zu den feinkörnigen Ablagerungseinheiten hin. Die oberen feinkörnigen Kernabschnitte spiegeln in allen drei Seen die postglaziale lakustrine Sedimentation wider. Im Beaver-See wird die postglaziale Fazies durch laminierte klastische Stillwassersedimente repräsentiert, im Radok-See durch Turbiditsequenzen und im Terrasovoje-See durch Algenlaminite. Abgesehen vom Terrasovoje-See ist die zeitliche Einordnung der Fazieswechsel auf Grund mangelnder Altersinformationen schwer erfassbar. Im Terrasovoje-See setzte die postglaziale Sedimentation um rund 12,4 cal. ka ein. Somit weisen die darunterliegenden glazigenen Klastika mindestens ein spätpleistozänes Alter auf. Die sedimentologischen Eigenschaften, Änderungen der Sedimentationsraten und organogene Zusammensetzung der postglazialen Biogenlaminite des Terrasovoje-Sees deuten auf Variationen der paläolimnologischen Bedingungen hinsichtlich Eisbedeckung, biologischer Produktivität, Wasserstand, Redoxbedingungen und Salinität hin, die mit regionalen holozänen Klimaänderungen in Verbindung gebracht werden können. Weitere Anhaltspunkte ergeben sich aus der Zusammensetzung und den Mächtigkeitsvariationen der Laminae, die generell aus Wechsellagerungen von Cyanobakterienmatten mit feinklastischen Lagen bestehen. Lagenzählungen der Laminae belegen Änderungen des Ablagerungsmilieus auf subdekadischen Zeitskalen, wobei zeitweilige jährliche Signale nicht ausgeschlossen werden können. Unter Berücksichtigung aller faziellen Indikatoren lässt sich aus der Sedimentabfolge des Terrasovoje-Sees ein frühholozänes Klimaoptimum zwischen 9 und 7 cal. ka sowie weitere Wärmephasen zwischen 3,2 und 2,3 cal. ka sowie 1,5 und 1,0 cal. ka ableiten. Im Vergleich mit Eiskernarchiven und anderen Seesedimentabfolgen aus ostantarktischen Oasen zeigt sich, dass das Auftreten postglazialer Warmphasen nicht allenorts einem allgemein gültigen räumlich-zeitlichen Muster folgt. Die Ursachen hierfür liegen vermutlich in den lokalen geographischen Gegebenheiten. Es lässt sich daraus schliessen, dass die bisher vorliegenden Klimarekonstruktionen eher das Lokalklima an einem Untersuchungsstandort als das Großklima der Ostantarktis reflektieren. Daraus ergibt sich die Notwendigkeit weiterer Untersuchungen von antarktischen Klimaarchiven und Untersuchungsstandorten, um örtliche von überregionalen Klimasignalen besser unterscheiden zu können. N2 - In the scope of a German-Australian research cooperation field work was conducted in the Amery Oasis (70°50’S, 68°00’E), situated in the Lambert Glacier/Amery Ice Shelf region, the largest East Antarctic ice drainage system. The German part comprised the retrieval of lacustrine sediment cores for the reconstruction of the late Quaternary development of the palaeoenvironment in the 1800 km2 large ice-free region. The three studied glacial lakes Beaver, Radok, and Terrasovoje reveal marked differences in size, hydrology and their sedimentary inventory. The goals of this thesis were to infer the onset of depostion in the lacustrine basins and to characterize changes in the depositional environment in the course of glacial retreat and the postglacial climate development. The methodic approach followed the recognition of sedimentary facies variability and sediment sources by means of facies analysis and mineralogical-geochemical provenance analysis. Another aspect was the high-resolution reconstruction of postglacial biogenic sedimentary modes in Lake Terrasovoje that provide insights into the short-term Holocene palaeo-climatic and palaeoenvironmental development. The origin of siliciclastics shows marked spatial differences between the lakes, reflecting the complex geological setting of the Amery Oasis. The main detrital sources comprise crystalline rocks of the East Antarctic craton, Permotriassic and Tertiary sedimentary rocks. The temporal variability of sediment provenance is less developed than the spatial pattern, pointing to relatively constant sediment sources through time in the respective lakes. The glaciolacustrine depositional environment of the three lakes shows clear spatial and temporal contrasts. In all lakes, the older sediments are composed of coarse, partly diamictic lithologies, while the younger materials consist of fine-grained laminites. The twofold lithofacial pattern is related to regional glacial retreat at the boundary between both sedimentary units that reduced direct glacigenic sediment input. In the epishelf Lake Beaver, in addition, the effect of postglacial sea-level rise led also to the rise of lake level and shifted the study site towards a more distal position from the shore, away from the influence of coarse clastic sediment input. The upper sedimentary units of the three lakes are dominated by fine-grained sediments, which only occasionally include ice-rafted dropstones. The postglacial sediments comprise clastic stillwater laminites at Lake Beaver, finely laminated turbidites in Lake Radok, and algal laminites in Lake Terrasovoje. Apart from Lake Terrasovoje the timing of the lithological change is hard to determine, because of missing age constraints. At Lake Terrasovoje, the postglacial sequence started at approximately 12.4 cal. ka BP, suggesting an late Pleistocene age for the underlying glacial sediments. Sedimentological features, changes in sedimentation rates, and the compositional variability of the organic-rich postglacial laminites in Lake Terrasovoje point to variations in the palaeolimnic environment in terms of ice cover, biological productivity, lake level, redox conditions, and salinity that can be related to the regional Holocene climate history. Further evidence arises from the structure, composition, and thickness variations of the laminae, which basically consist of alternations of algal mats (cyanobacteria) and fine-clastic layers. The counting of laminae couplets reveal changes in the depositional enviroment at sub-decadal time scales that partly might include annual layering. Under the consideration of all sedimentological facies indicators, the postglacial laminite sequence of Lake Terrasovoje documents an early Holocene climate optimum between 9 and 7 cal. ka as well as two warm spells between 3.2 and 2.3 cal. ka and 1.5 and 1.0 cal. ka, respectively. In comparison with ice-core records and lake records from other East Antarctic ice-free regions, it becomes evident that the appearence of warm episodes does not follow a consistent spatial-temporal pattern. Common trends comprise the existence of an early Holocene climate optimum, as seen in the ice-core records and in the Amery Oasis, and several warm episodes in the middle to late Holocene that are often time-transgressive. The cause of this inconsistent pattern probably can be explained by local boundary conditions that affect the study sites, such as topography, maritime influences and the distance to glacial ice. Therefore, many climate reconstructions basically document local climate rather than overregional Antarctic climate. In conclusion, there is need for ongoing palaeoclimatic studies in East Antarctica and the establishment of a dense network of study sites to distinguish and validate local from overregional palaeoclimatic fingerprints. KW - Antarktis KW - Sedimentologie KW - Limnologie KW - Geochemie KW - Mineralogie KW - Amery-Oase KW - Ostantarktis KW - Spätquartär KW - Paläolimnologie KW - Amery Oasis KW - East Antarctica KW - Late Quaternary KW - Paleolimnology Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7980 ER - TY - THES A1 - Sorrel, Philippe T1 - The Aral Sea : a palaeoclimate archive T1 - Der Aralsee : ein Paläoklimaarchiv N2 - The intracontinental endorheic Aral Sea, remote from oceanic influences, represents an excellent sedimentary archive in Central Asia that can be used for high-resolution palaeoclimate studies. We performed palynological, microfacies and geochemical analyses on sediment cores retrieved from Chernyshov Bay, in the NW part of the modern Large Aral Sea. The most complete sedimentary sequence, whose total length is 11 m, covers approximately the past 2000 years of the late Holocene. High-resolution palynological analyses, conducted on both dinoflagellate cysts assemblages and pollen grains, evidenced prominent environmental change in the Aral Sea and in the catchment area. The diversity and the distribution of dinoflagellate cysts within the assemblages characterized the sequence of salinity and lake-level changes during the past 2000 years. Due to the strong dependence of the Aral Sea hydrology to inputs from its tributaries, the lake levels are ultimately linked to fluctuations in meltwater discharges during spring. As the amplitude of glacial meltwater inputs is largely controlled by temperature variations in the Tien Shan and Pamir Mountains during the melting season, salinity and lake-level changes of the Aral Sea reflect temperature fluctuations in the high catchment area during the past 2000 years. Dinoflagellate cyst assemblages document lake lowstands and hypersaline conditions during ca. 0–425 AD, 920–1230 AD, 1500 AD, 1600–1650 AD, 1800 AD and since the 1960s, whereas oligosaline conditions and higher lake levels prevailed during the intervening periods. Besides, reworked dinoflagellate cysts from Palaeogene and Neogene deposits happened to be a valuable proxy for extreme sheet-wash events, when precipitation is enhanced over the Aral Sea Basin as during 1230–1450 AD. We propose that the recorded environmental changes are related primarily to climate, but may have been possibly amplified during extreme conditions by human-controlled irrigation activities or military conflicts. Additionally, salinity levels and variations in solar activity show striking similarities over the past millennium, as during 1000–1300 AD, 1450–1550 and 1600–1700 AD when low lake levels match well with an increase in solar activity thus suggesting that an increase in the net radiative forcing reinforced past Aral Sea’s regressions. On the other hand, we used pollen analyses to quantify changes in moisture conditions in the Aral Sea Basin. High-resolution reconstruction of precipitation (mean annual) and temperature (mean annual, coldest versus warmest month) parameters are performed using the “probability mutual climatic spheres” method, providing the sequence of climate change for the past 2000 years in western Central Asia. Cold and arid conditions prevailed during ca. 0–400 AD, 900–1150 AD and 1500–1650 AD with the extension of xeric vegetation dominated by steppe elements. Conversely, warmer and less arid conditions occurred during ca. 400–900 AD and 1150–1450 AD, where steppe vegetation was enriched in plants requiring moister conditions. Change in the precipitation pattern over the Aral Sea Basin is shown to be predominantly controlled by the Eastern Mediterranean (EM) cyclonic system, which provides humidity to the Middle East and western Central Asia during winter and early spring. As the EM is significantly regulated by pressure modulations of the North Atlantic Oscillation (NAO) when the system is in a negative phase, a relationship between humidity over western Central Asia and the NAO is proposed. Besides, laminated sediments record shifts in sedimentary processes during the late Holocene that reflect pronounced changes in taphonomic dynamics. In Central Asia, the frequency of dust storms occurring during spring when the continent is heating up is mostly controlled by the intensity and the position of the Siberian High (SH) Pressure System. Using titanium (Ti) content in laminated sediments as a proxy for aeolian detrital inputs, changes in wind dynamics over Central Asia is documented for the past 1500 years, offering the longest reconstruction of SH variability to date. Based on high Ti content, stronger wind dynamics are reported from 450–700 AD, 1210–1265 AD, 1350–1750 AD and 1800–1975 AD, reporting a stronger SH during spring. In contrast, lower Ti content from 1750–1800 AD and 1980–1985 AD reflect a diminished influence of the SH and a reduced atmospheric circulation. During 1180–1210 AD and 1265–1310 AD, considerably weakened atmospheric circulation is evidenced. As a whole, though climate dynamics controlled environmental changes and ultimately modulated changes in the western Central Asia’s climate system, it is likely that changes in solar activity also had an impact by influencing to some extent the Aral Sea’s hydrology balance and also regional temperature patterns in the past.
The appendix of the thesis is provided via the HTML document as ZIP download. N2 - Der Aralsee ist ein intrakontinental gelegenes endorheisches Gewässer fernab von ozeanischen Einflüssen, welches ein exzellentes sedimentäres Archiv für hochauflösende Paläoklimastudien in Zentralasien darstellt. In der vorliegenden Studie wurden umfangreiche palynologische, mikrofazielle und geochemische Analysen anhand von mehreren Bohrkernen aus der Chernyshov-Bucht im NW des heutigen Großen Aralsees durchgeführt. Die vollständigste der erbohrten Sequenzen weist dabei eine Länge von 11 m auf und beinhaltet näherungsweise die letzten 2000 Jahre des Holozän. Die hochauflösenden palynologischen Analysen der Studie, welche sowohl die Untersuchung von Dinoflagellatenzysten als auch Pollen beinhaltet, zeugen von einschneidenden Umweltveränderungen im Aralsee und seinem Einzugsgebiet. Die Untersuchung von Diversität und räumlicher Verbreitung der fossilen Dinoflagellatenzysten vermittelt dabei ein genaues Bild von den Salinitäts- und Seespiegeländerungen der letzten 2000 Jahre. Aufgrund der weitgehenden Abhängigkeit der hydrologischen Verhältnisse des Aralsees von der Wasserführung seinen tributären Flüsse, hängt sein Seespiegel unmittelbar von den Schmelzwasserzuflüssen im Frühjahr ab. Da der Schmelzwasserzufluss seinerseits mit den Temperaturveränderungen im Tien Shan und Pamir während der Schneeschmelze in Verbindung steht, spiegeln die Paläo-Salinität und der Paläo-Seespiegel des Aralsees folglich die Temperaturveränderungen im hochgelegenen Einzugsgebiet des Aralsees wider. Die Untersuchung der fossilen Dinoflagellatenzysten belegt besonders niedrige Seestände und hypersaline Bedingungen während der Perioden 0–425 AD, 920–1230 AD, 1500 AD, 1600 AD, 1800 AD und seit 1960, wohingegen oligohaline Bedingungen und höhere Seestände zwischen diesen Phasen dokumentiert sind. Ferner stellen umgelagerte Dinoflagellatenzysten aus Paläogenen und Neogenen Ablagerungen wertvolle Proxies für den Beleg von extremen Flächenspülereignissen dar, wie sie beispielsweise 1230–1450 AD aufgetreten und durch sehr hohe Niederschläge dokumentiert sind. Anhand der in der Studie erarbeiteten Daten ist davon auszugehen, dass die am Aralsee nachgewiesenen Umweltveränderungen im Wesentlichen von klimatischen Änderungen induziert wurden, durch historischen Bewässerungsfeldbau oder militärischen Konflikten jedoch noch verstärkt werden konnten. Darüber hinaus zeigen die Seestandsveränderungen eine sehr hohe Korrelation mit der Sonnenaktivität im letzten Jahrtausend, wie etwa während den Perioden 1000–1300 AD, 1450–1550 und 1600–1700 AD. Komplementär zu der Untersuchung von Dinoflagellatenzysten liefert die Pollenanalyse wertvolle Klimadaten für das Becken des Aralsees. Verschiedene Temperatur- (Jahresmittel, kältester gegen wärmster Monat) und Niederschlagsparameter wurden mit Hilfe der Methode der „probability mutual climatic spheres“ quantitative ausgewertet, womit die Klimaentwicklung im westlichen Zentralasien der letzten 2000 Jahre nachvollzogen werden konnte. Kalte und aride Bedingungen wiesen demnach die durch trockenangepasste Vegetation und Steppenelementen geprägten Perioden 0–400 AD, 900–1150 AD und 1500–1650 AD auf. Andererseits traten warme und weniger aride Klimabedingungen in den durch niederschlagsbedürftigere Pflanzen gekennzeichneten Zeiträumen 400–900 AD and 1150–1450 AD in den Vordergrund. Die Studie zeigt für das Becken des Aralsees, dass die Veränderungen im Niederschlagsmuster hauptsächlich vom zyklonalen System des östlichen Mittelmeergebietes (EM) gesteuert werden, welches den nahen Osten und das westliche Zentralasien mit Feuchtigkeit im Winter und Frühjahr versorgt. Da seinerseits das EM maßgeblich von Luftdruckänderungen der Nordatlantischen Oszillation (NAO) während seiner negativen Phase reguliert wird, ist ein Zusammenhang zwischen der Feuchtigkeit im westlichen Zentralasien und dem NAO anzunehmen. Außerdem belegen die laminierten Sedimente Veränderungen in den Sedimentationsprozessen während des späten Holozän, sowie ausgeprägte Änderungen im taphonomischen Verhalten. In Zentralasien hängt die Häufigkeit der im Frühjahr auftretenden Staubstürme hauptsächlich von der Intensität und der Position des Sibirienhochs (SH) ab. Der Gehalt an Titanium (Ti) als Proxy für äolischen Eintrag in den laminierten Sedimenten erlaubt die Rekonstruktion von winddynamischen Veränderungen in Zentralasien in den letzten 1500 Jahren. Die Studie beinhaltet daher die bislang längste Analyse der Variabilität des SH. Hohe Titaniumwerte sprechen für eine stärkere Winddynamik während den Perioden 450–700 AD, 1210–1265 AD, 1350–1750 AD und 1800–1975 AD, und dokumentieren demzufolge eine stärker ausgeprägtes SH während des Frühjahrs. Umgekehrt belegen geringe Titaniumwerte für die Zeit von 1180–1210 AD, 1265–1310 AD, 1750–1800 AD und 1980–1985 AD einen reduzierten Einfluss des SH. T2 - The Aral Sea : a palaeoclimate archive KW - Aralsee KW - spätes Holozän KW - Klimaveränderung KW - Seestandsänderung KW - Dinoflagellatenzyste KW - Pollenanalyse KW - Winddynamik KW - Zentralasien KW - Mediterranes Tiefdrucksystem KW - Sibirienhoch KW - Vegetation KW - NAO KW - Aral Sea KW - late holocene KW - climatic change KW - lake-level change KW - Central Asia Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7807 ER - TY - CHAP A1 - Rehak, Katrin A1 - Strecker, Manfred A1 - Echtler, Helmut Peter T1 - DEM supported tectonic geomorphology : the Coastal Cordillera of the South-Central Chilean active margin ; [Poster] N2 - Fluvial systems are one of the major features shaping a landscape. They adjust to the prevailing tectonic and climatic setting and therefore are very sensitive markers of changes in these systems. If their response to tectonic and climatic forcing is quantified and if the climatic signal is excluded, it is possible to derive a local deformation history. Here, we investigate fluvial terraces and erosional surfaces in the southern Chilean forearc to assess a long-term geomorphic and hence tectonic evolution. Remote sensing and field studies of the Nahuelbuta Range show that the long-term deformation of the Chilean forearc is manifested by breaks in topography, sequences of differentially uplifted marine, alluvial and strath terraces as well as tectonically modified river courses and drainage basins. We used SRTM-90-data as basic elevation information for extracting and delineating drainage networks. We calculated hypsometric curves as an indicator for basin uplift, stream-length gradient indices to identify stream segments with anomalous slopes, and longitudinal river profiles as well as DS-plots to identify knickpoints and other anomalies. In addition, we investigated topography with elevation-slope graphs, profiles, and DEMs to reveal erosional surfaces. During the first field trip we already measured palaeoflow directions, performed pebble counting and sampled the fluvial terraces in order to apply cosmogenic nuclide dating (10Be, 26Al) as well as provenance analyses. Our preliminary analysis of the Coastal Cordillera indicates a clear segmentation between the northern and southern parts of the Nahuelbuta Range. The Lanalhue Fault, a NW-SE striking fault zone oblique to the plate boundary, defines the segment boundary. Furthermore, we find a complex drainage re-organisation including a drainage reversal and wind gap on the divide between the Tirúa and Pellahuén basins east of the town Tirúa. The coastal basins lost most of their Andean sediment supply areas that existed in Tertiary and in part during early Pleistocene time. Between the Bío-Bío and Imperial rivers no Andean river is recently capable to traverse the Coastal Cordillera, suggesting ongoing Quaternary uplift of the entire range. From the spatial distribution of geomorphic surfaces in this region two uplift signals may be derived: (1) a long-term differential uplift process, active since the Miocene and possibly caused by underplating of subducted trench sediments, (2) a younger, local uplift affecting only the northern part of the Nahuelbuta Range that may be caused by the interaction of the forearc with the subduction of the Mocha Fracture Zone at the latitude of the Arauco peninsula. Our approach thus provides results in our attempt to decipher the characteristics of forearc development of active convergent margins using long-term geomorphic indicators. Furthermore, it is expected that our ongoing assessment will constrain repeatedly active zones of deformation.
Interdisziplinäres Zentrum für Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7224 ER - TY - THES A1 - Heim, Birgit T1 - Qualitative and quantitative analyses of Lake Baikal's surface-waters using ocean colour satellite data (SeaWiFS) T1 - Qualitative und quantitative Analysen des Baikalsee Oberflächenwassers auf der Grundlage von Ocean Colour Satellitendaten (SeaWiFS) N2 - One of the most difficult issues when dealing with optical water remote-sensing is its acceptance as a useful application for environmental research. This problem is, on the one hand, concerned with the optical complexity and variability of the investigated natural media, and therefore the question arises as to the plausibility of the parameters derived from remote-sensing techniques. Detailed knowledge about the regional bio- and chemico-optical properties is required for such studies, however such information is seldom available for the sites of interest. On the other hand, the primary advantage of remote-sensing information, which is the provision of a spatial overview, may not be exploited fully by the disciplines that would benefit most from such information. It is often seen in a variety of disciplines that scientists have been primarily trained to look at discrete data sets, and therefore have no experience of incorporating information dealing with spatial heterogeneity. In this thesis, the opportunity was made available to assess the potential of Ocean Colour data to provide spatial and seasonal information about the surface waters of Lake Baikal (Siberia). While discrete limnological field data is available, the spatial extension of Lake Baikal is enormous (ca. 600 km), while the field data are limited to selected sites and expedition time windows. Therefore, this remote-sensing investigation aimed to support a multi-disciplinary limnological investigation within the framework of the paleoclimate EU-project ‘High Resolution CONTINENTal Paleoclimate Record in Lake Baikal, Siberia (CONTINENT)’ using spatial and seasonal information from the SeaWiFS satellite (NASA). From this, the SeaWiFS study evolved to become the first efficient bio-optical satellite study of Lake Baikal. During the course of three years, field work including spectral field measurements and water sampling, was carried out at Lake Baikal in Southern Siberia, and at the Mecklenburg and Brandenburg lake districts in Germany. The first step in processing the SeaWiFS satellite data involved adapting the SeaDAS (NASA) atmospheric-correction processing to match as close as possible the specific conditions of Lake Baikal. Next, various Chl-a algorithms were tested on the atmospherically-corrected optimized SeaWiFS data set (years 2001 to 2002), comparing the CONTINENT pigment ground-truth data with the Chl-a concentrations derived from the satellite data. This showed the high performance of the global Chl-a products OC2 and OC4 for the oligotrophic, transparent waters (bio-optical Case 1) of Lake Baikal. However, considerable Chl-a overestimation prevailed in bio-optical Case 2 areas for the case of discharge events. High-organic terrigenous input into Lake Baikal could be traced and information extracted using the SeaWiFS spectral data. Suspended Particulate Matter (SPM) was quantified by the regression of the SeaDAS attenuation coefficient as the optical parameter with SPM field data. Finally, the Chl-a and terrigenous input maps derived from the remote sensing data were used to assist with analyzing the relationships between the various discrete data obtained during the CONTINENT field work. Hence, plausible spatial and seasonal information describing autochthonous and allochthonous material in Lake Baikal could be provided by satellite data.Lake Baikal, with its bio-optical complexity and its different areas of Case 1 and Case 2 waters, is a very interesting case study for Ocean Colour analyses. Proposals for future Ocean Colour studies of Lake Baikal are discussed, including which bio-optical parameters for analytical models still need to be clarified by field investigations. N2 - Die Gewässerfernerkundung entwickelte sich seit den 70ern vor allem aus der Ozeanographie und der Atmosphärenforschung, und wird inzwischen als anerkannte Methode genutzt, um global die Phytoplanktonverteilung in den Weltmeeren erfassen zu können, u.a. für CO2-Haushaltsmodellierungen. Atmosphärenkorrigierte Multi- und Hyperspektralscannerdaten ermöglichen die Qualifizierung bio-optischer Gewässertypen und die Quantifizierung optisch sichtbarer Wasserinhaltsstoffe und bieten gerade auch für dynamische und heterogene Küsten- und Binnengewässer das große Potential des räumlichen Informationsgewinnes.Im Rahmen des Paläoklimaprojektes CONTINENT wurde in dieser Arbeit das Oberflächenwasser des Baikalsees mit Gewässerfernerkungsmethoden analysiert. Wichtig für die Interpretation von Klima-Proxies sind v.a. auch Hinweise auf die Verteilung des autochthonen Materials im Baikalsee (Fernerkundungsparameter: Chlorophyll-a), ebenso wie Hinweise auf allochthone Einträge an den Bohrungsstellen (Fernerkundungsparameter ‚Terrigener Eintrag’). Auf den Geländekampagnen in den Sommern 2001, 2002, 2003 in Sibirien und in Deutschland wurden Feldspektrometermessungen mit gleichzeitiger Wasserprobenahme auf die optisch sichtbaren Wasserinhaltsstoffe Phytoplankton, Schwebstoff, und DOC durchgeführt. Dabei konnten Messtechniken für Geländespektrometer evaluiert, und grundlegende Aussagen über die spektrale Verteilung des In-Wasser Lichtfeldes im Baikalsee gemacht werden. Die Ocean Colour Satellitendaten des NASA-Instrumentes SeaWiFS und die Möglichkeiten der komplexen NASA Software SeaDAS wurden genutzt. Für die Ableitung des am Baikalsee anzutreffenden organikreichen terrigenen Eintrages, wurde ein vorläufiger Algorithmus aus den Geländedaten generiert. Verschiedene Algorithmen für den Parameter ‚Chlorophyll-a’ wurden mit dem Geländedatensatz der Projektpartnerin S. Fietz (Institut für Gewässerökologie und Binnenfischerei, IGB) evaluiert. Als geeignetester etablierte sich der auf oligotrophe Gewässer optimierte NASA Chlorophyll Algorithmus ‚Ocean Colour (OC) 2’. Die Quantifizierungen und Ergebnisse werden diskutiert. Als Endergebnis wird der Überblick über Sedimenteintrag und Phytoplanktondynamik im Baikalsee für den Zeitraum 2001-2002 zur Verfügung gestellt und die autochthonen versus allochthonen Einflüsse an den Projektlokationen werden beschrieben. Der Baikalsee erwies sich als bio-optisch ein sehr komplexes und interessantes Studienobjekt. Ein wichtiger Punkt, der in dieser Arbeit angesprochen wird, ist die Atmosphärenkorrektur, die wesentliche Einflüsse auf die Qualifizierungen und Quantifizierungen hat, aber als Standardprogramm nur für den pelagialen Wasserkörper in Meeresspiegelhöhe mit marinen, bzw. Küstenatmosphären konditioniert ist. Ein weiterer bedeutender Punkt, der in dieser Arbeit diskutiert wird, ist der relevante spektrale Einfluss des organikreichen terrigenen Eintrages auf die Gewässerfarbe und dadurch auf die Qualität der Chlorophyll-Ableitung. Somit boten sich die Möglichkeiten, das räumliche Ausmaß und die Dynamik rezenter terrigener Einträge zu erfassen. Auch die Entwicklung des Phytoplankton von Frühsommer bis Spätsommer im Baikalsee konnte mit den SeaWiFS Daten nachvollzogen werden. Die hier vorgestellte Studie stellte sich als die erste grundlegende optische Gewässerfernerkundungsstudie mit Satellitendaten am Baikalsee heraus, und konnte erfolgreich abgeschlossen werden. KW - Baikalsee KW - Optische Fernerkundung KW - Phytoplankton KW - Sedimenttransport KW - Palaeoklima KW - SeaWiFS Ocean-Colour Satellitendaten KW - autochthon KW - allochthon KW - Gewässerfernerkundung KW - Lake Baikal KW - Ocean Colour satellite data KW - terrigenous input KW - phytoplankton distribution Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7182 ER - TY - CHAP A1 - Lück, Erika T1 - Geophysik für den oberflächennahen Bereich (Landwirtschaft, Bodenkunde, Archäologie, Umwelt usw.) N2 - Dokument 1: Foliensatz | Dokument 2: Animation
Interdisziplinäres Zentrum für Musterdynamik und Angewandte Fernerkundung Workshop vom 9. - 10. Februar 2006 Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7045 ER - TY - THES A1 - Martin, Sebastian T1 - Subduction zone wave guides : deciphering slab structure using intraslab seismicity at the Chile-Peru subduction zone T1 - Wellenleiter in Subduktionszonen : Bestimmung der Struktur der Chile-Peru Subduktionszone mit Hilfe von intra-platten Seismizität N2 - Subduction zones are regions of intense earthquake activity up to great depth. Sources are located inside the subducting lithosphere and, as a consequence, seismic radiation from subduction zone earthquakes is strongly affected by the interior slab structure. The wave field of these intraslab events observed in the forearc region is profoundly influenced by a seismically slow layer atop the slab surface. This several kilometer thick low-velocity channel (wave guide) causes the entrapment of seismic energy producing strong guided wave phases that appear in P onsets in certain regions of the forearc. Observations at the Chile-Peru subduction zone presented here, as well as observations at several other circum-pacific subduction zones show such signals. Guided wave analysis contributes details of immense value regarding the processes near the slab surface, such as layering of subducted lithosphere, source locations of intraslab seismicity and most of all, range and manner of mineralogical phase transitions. Seismological data stem from intermediate depth events (depth range 70 km - 300 km) recorded in northern Chile near 21 Grad S during the collaborative research initiative " Deformation Processes in the Andes" (SFB 267). A subset of stations - all located within a slab-parallel transect close to 69 Grad W - show low-frequency first arrivals (2 Hz), sometimes followed by a second high-frequency phase. We employ 2-dimensional finite-difference simulations of complete P-SV wave propagation to explore the parameter space of subduction zone wave guides and explain the observations. Key processes underlying the guided wave propagation are studied: Two distinct mechanisms of decoupling of trapped energy from the wave guide are analyzed - a prerequisite to observe the phases at stations located at large distances from the wave guide (up to 100 km). Variations of guided wave effects perpendicular to the strike of the subduction zone are investigated, such as the influence of phases traveling in the fast slab. Further, the merits and limits of guided wave analysis are assessed. Frequency spectra of the guided wave onsets prove to be a robust quantity that captures guided wave characteristics at subduction zones including higher mode excitation. They facilitate the inference of wave guide structure and source positioning: The peak frequency of the guided wave fundamental mode is associated with a certain combination of layer width and velocity contrast. The excitation strength of the guided wave fundamental mode and higher modes is associated with source position and orientation relative to the low-velocity layer. The guided wave signals at the Chile-Peru subduction zone are caused by energy that leaks from the subduction zone wave guide. On the one hand, the bend shape of the slab allows for leakage at a depth of 100 km. On the other, equalization of velocities between the wave guide and the host rocks causes further energy leakage at the contact zone between continental and oceanic crust (70 km depth). Guided waves bearing information on deep slab structure can therefore be recorded at specific regions in the forearc. These regions are determined based on slab geometry, and their locations coincide with the observations. A number of strong constraints on the structure of the Chile-Peru slab are inferred: The deep wave guide for intraslab events is formed by a layer of 2 km average width that remains seismically slow (7 percent velocity reduction compared to surrounding mantle). This low-velocity layer at the top of the Chile-Peru slab is imaged from a depth of 100 km down to at least 160 km. Intermediate depth events causing the observed phases are located inside the layer or directly beneath it in the slab mantle. The layer is interpreted as partially eclogized lower oceanic crust persisting to depth beyond the volcanic arc. N2 - Subduktionszonen sind bis in große Tiefen von intensiver Erdbebentätigkeit geprägt. Die Erdbebenquellen befinden sich in der subduzierten Lithosphäre (Slab), ihr Wellenfeld wird deshalb stark von der internen Slab-Struktur beeinflusst. Eine Schicht mit reduzierter seismischer Geschwindigkeit im oberen Bereich der Platte kann als Wellenleiter für diese Signale fungieren. In der nur wenige Kilometer dicken Schicht entstehen sogenannte geführte Wellen, die in Teilen des Forearc beobachtet werden. Diese Phasen bergen wertvolle Informationen über die Struktur nahe der Slab-Oberfläche, wie zum Beispiel Dicke der Schichtung, Herdlokationen und vor allem Tiefe und Art mineralogischer Umsetzungen. Die Beobachtungen stammen von mitteltiefen Beben (70 km - 300 km) im Untersuchungsgebiet in Nord-Chile und wurden im Rahmen des Sonderforschungsbereich 267 " Deformationsprozesse in den Anden" aufgezeichnet. Stationen in einem Streifen um 69 Grad W, der sich parallel zum Streichen der Subduktionszone erstreckt, zeigen niederfrequente Ersteinsätze, denen teilweise höherfrequente Phasen folgen. Mit Hilfe eines 2-dimensionalen Finite-Differenzen-Algorithmus werden die P-SV Wellenausbreitung simuliert, und die Beobachtungen erklärt. Zentrale Fragestellungen zu Wellenleitern in Subduktionszonen werden untersucht: Es werden zwei Mechanismen, die das Auskoppeln seismischer Energie aus dem Wellenleiter ermöglichen beschrieben - eine Grundvoraussetzung für das Auftreten von geführten Wellen in großen Entfernungen vom Wellenleiter (bis zu 100 km). Des weiteren werden Stärken und Grenzen der Analyse von geführten Wellen erörtert. Die Spektren der geführten Wellenzüge erweisen sich als robuste Messgröße, um die Charakteristika des Wellenleiters zu bestimmt. Struktur des Wellenleiters und Quellpositionen können so für festgelegte Quell-Empfänger-Geometrien abgeleitet werden. Die Peak-Frequenz der Grundmode wird durch eine Kombination aus Dicke der Schicht und Geschwindigkeitskontrast bestimmt. Die Stärke der Anregung der Grundmode und höherer Moden lässt auf die Lage und Orientierung der Erdbebenquelle relativ zur Schicht schließen. Geschwindigkeitskontrast, Schichtdicke und Quellposition sind von herausragender Bedeutung, um mineralogische Interpretationen des Wellenleiters zu überprüfen. Aufbauend auf die Simulationen werden die Beobachtungen interpretiert und Auskunft über die Struktur der Chile-Peru Subduktionszone erhalten: Eine dünne Schicht an der Slab-Oberfläche (durchschnittlich 2 km dick) trägt geringere seismische Geschwindigkeiten als der umgebende Mantel und fungiert als Wellenleiter für intra-platten Ereignisse in Tiefen von 100 bis mindestens 160 km. Ereignisse, die geführte Wellen hervorrufen, liegen in dieser Schicht oder direkt darunter im subduzierten Mantel. Um zu den Stationen in der Forearc-Region zu gelangen, entkoppelt ein Teil der geführten Wellen in einer Tiefe von circa 100 km aus der Niedergeschwindigkeitsschicht. Die Krümmung des Slab erlaubt das Austreten der Wellen und nimmt auch Einfluss auf die Pulsformen. Der Wellenleiter in der Chile-Peru Subduktionszone ergibt sich als unregelmäßige Schicht mit reduzierter seismischer Geschwindigkeit, in der geführte Wellen entstehen, in unterschiedlichen Tiefen wieder austreten, und an die freie Oberfläche gelangen. Die Beobachtungsgebiete befinden sich im Forearc und werden durch die Geometrie und Struktur der subduzierten Platte festgelegt. Die nur wenige Kilometer dicke, seismisch langsame Schicht an der Oberfläche des Chile-Peru Slab legt nahe, dass die Unterkruste der subduzierten Platte bis in große Tiefen besteht und nicht vollständig eklogitisiert ist. Abgeleitete Schichtdicke, Geschwindigkeitskontrast KW - Anden KW - Subduktion KW - Wellenleiter KW - Erdbeben KW - ozeanische Kruste KW - Gabbro-Eklogit KW - Transformation KW - geführte Wellen KW - subduction KW - guided waves KW - oceanic crust KW - Andes KW - finite difference simulation Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5820 ER -