TY - JOUR A1 - Adelsberger, Joseph A1 - Bivigou Koumba, Achille Mayelle A1 - Miasnikova, Anna A1 - Busch, Peter A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter A1 - Papadakis, Christine M. T1 - Polystyrene-block-poly (methoxy diethylene glycol acrylate)-block-polystyrene triblock copolymers in aqueous solution-a SANS study of the temperature-induced switching behavior JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - A concentrated solution of a symmetric triblock copolymer with a thermoresponsive poly(methoxy diethylene glycol acrylate) (PMDEGA) middle block and short hydrophobic, fully deuterated polystyrene end blocks is investigated in D2O where it undergoes a lower critical solution temperature-type phase transition at ca. 36 A degrees C. Small-angle neutron scattering (SANS) in a wide temperature range (15-50 A degrees C) is used to characterize the size and inner structure of the micelles as well as the correlation between the micelles and the formation of aggregates by the micelles above the cloud point (CP). A model featuring spherical core-shell micelles, which are correlated by a hard-sphere potential or a sticky hard-sphere potential together with a Guinier form factor describing aggregates formed by the micelles above the CP, fits the SANS curves well in the entire temperature range. The thickness of the thermoresponsive micellar PMDEGA shell as well as the hard-sphere radius increase slightly already below the cloud point. Whereas the thickness of the thermoresponsive micellar shell hardly shrinks when heating through the CP and up to 50 A degrees C, the hard-sphere radius decreases within 3.5 K at the CP. The volume fraction decreases already significantly below the CP, which may be at the origin of the previously observed gel-sol transition far below the CP (Miasnikova et al., Langmuir 28: 4479-4490, 2012). Above the CP, small, and at higher temperatures, large aggregates are formed by the micelles. KW - Hydrogel KW - Thermoresponsive KW - LCST behavior KW - SANS Y1 - 2015 U6 - https://doi.org/10.1007/s00396-015-3535-6 SN - 0303-402X SN - 1435-1536 VL - 293 IS - 5 SP - 1515 EP - 1523 PB - Springer CY - New York ER - TY - JOUR A1 - Couturier, Jean-Philippe A1 - Sütterlin, Martin A1 - Laschewsky, André A1 - Hettrich, Cornelia A1 - Wischerhoff, Erik T1 - Responsive Inverse Opal Hydrogels for the Sensing of Macromolecules JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Dual responsive inverse opal hydrogels were designed as autonomous sensor systems for (bio)macromolecules, exploiting the analyte-induced modulation of the opal's structural color. The systems that are based on oligo(ethylene glycol) macromonomers additionally incorporate comonomers with various recognition units. They combine a coil-to-globule collapse transition of the LCST type with sensitivity of the transition temperature toward molecular recognition processes. This enables the specific detection of macromolecular analytes, such as glycopolymers and proteins, by simple optical methods. While the inverse opal structure assists the effective diffusion even of large analytes into the photonic crystal, the stimulus responsiveness gives rise to strong shifts of the optical Bragg peak of more than 100nm upon analyte binding at a given temperature. The systems' design provides a versatile platform for the development of easy-to-use, fast, and low-cost sensors for pathogens. KW - hydrogels KW - photonic crystals KW - polymers KW - responsive materials KW - sensors Y1 - 2015 U6 - https://doi.org/10.1002/anie.201500674 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 22 SP - 6641 EP - 6644 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Cramer, Ashley D. A1 - Gambinossi, Filippo A1 - Wischerhoff, Erik A1 - Laschewsky, André A1 - Miller, Reinhard A1 - Ferri, James K. T1 - Flexible thermoresponsive nanomembranes at the aqueous-air interface JF - Chemical communications N2 - A synthetic pathway is described to construct thermoresponsive freestanding nanomembranes at the aqueous-air interface of a pendant drop. Dynamic control of the reaction kinetics allows formation of viscoelastic interfaces supporting anisotropic stresses and mechanical stability, which can be tuned by external stimuli. Y1 - 2015 U6 - https://doi.org/10.1039/c4cc07359b SN - 1359-7345 SN - 1364-548X VL - 51 IS - 5 SP - 877 EP - 880 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - de Molina, Paula Malo A1 - Ihlefeldt, Franziska Stefanie A1 - Prevost, Sylvain A1 - Herfurth, Christoph A1 - Appavou, Marie-Sousai A1 - Laschewsky, André A1 - Gradzielski, Michael T1 - Phase Behavior of Nonionic Microemulsions with Multi-end-capped Polymers and Its Relation to the Mesoscopic Structure JF - Langmuir N2 - The polymer architecture of telechelic or associative polymers has a large impact on the bridging of self-assembled structures. This Work presents: the phase behavior, small angle neutron scattering (SANS), dynamic light scattering (DLS), and fluorescence correlation spectroscopy (FCS) of a nonionic oil-in-water (O/W) microemulsion with hydrophobically end-capped multiarm polymers With functionalities f = 2, 3, and 4. For high polymer concentrations and large average interdroplet distance relative to the end-to-end distance of the polymer, d/R-ee; the system phase separates into a dense, highly connected droplet network phase, in equilibrium with a dilute phase. The extent of the two-phase region is larger for polymers With similar length but higher f. The Interaction potential between the droplets in the presence of polymer has both a repulsive and an attractive contribution as a result of the counterbalancing effects of the exclusion by polymer chains and bridging between droplets. This study experimentally demonstrates that higher polymer functionalities induce a stronger attractive force between droplets, which is responsible for a more extended phase separation region., and correlate with lower Collective droplet diffusivities and higher amplitude of the second relaxation time in DLS. The viscosity and the droplet self-diffusion obtained from FCS, however, are dominated by the end-capped chain concentration. Y1 - 2015 U6 - https://doi.org/10.1021/acs.langmuir.5b00817 SN - 0743-7463 VL - 31 IS - 18 SP - 5198 EP - 5209 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Fandrich, Artur A1 - Buller, Jens A1 - Schäfer, Daniel A1 - Wischerhoff, Erik A1 - Laschewsky, André A1 - Lisdat, Fred T1 - Electrochemical characterization of a responsive macromolecular interface on gold JF - Physica status solidi : A, Applications and materials science N2 - This study reports on the investigation of a thermoresponsive polymer as a thin film on electrodes and the influence of coupling a peptide and an antibody to the film. The utilized polymer from the class of poly(oligoethylene glycol)-methacrylate polymers (poly(OEGMA)) with carboxy functions containing side chains was synthesized and properly characterized in aqueous solutions. The dependence of the cloud point on the pH of the surrounding media is discussed. The responsive polymer was immobilized on gold electrodes as shown by electrochemical, quartz crystal microbalance (QCM), and atomic force microscopy (AFM) techniques. The temperature dependent behavior of the polymer covalently grafted to gold substrates is investigated using cyclic voltammetry (CV) in ferro-/ferricyanide solution. Significant changes in the slope of the temperature-dependence of the voltammetric peak current and the peak separation values clearly indicate the thermally induced conformational change on the surface. Finally, a biorecognition reaction between a short FLAG peptide (N-Asp-Tyr-Lys-Asp-Asp-Asp-Asp-Lys-C) covalently immobilized on the polymer interface and the corresponding IgG antibody was performed. The study shows that the responsiveness of the electrode is retained after peptide coupling and antibody binding, although the response is diminished. KW - biorecognition reactions KW - cyclic voltammetry KW - electrodes KW - gold KW - interfaces KW - responsive polymers Y1 - 2015 U6 - https://doi.org/10.1002/pssa.201431698 SN - 1862-6300 SN - 1862-6319 VL - 212 IS - 6 SP - 1359 EP - 1367 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Gambinossi, Filippo A1 - Sefcik, Lauren S. A1 - Wischerhoff, Erik A1 - Laschewsky, André A1 - Ferri, James K. T1 - Engineering Adhesion to Thermoresponsive Substrates: Effect of Polymer Composition on Liquid-Liquid-Solid Wetting JF - ACS applied materials & interfaces N2 - Adhesion control in liquidliquidsolid systems represents a challenge for applications ranging from self-cleaning to biocompatibility of engineered materials. By using responsive polymer chemistry and molecular self-assembly, adhesion at solid/liquid interfaces can be achieved and modulated by external stimuli. Here, we utilize thermosensitive polymeric materials based on random copolymers of di(ethylene glycol) methyl ether methacrylate (x = MEO(2)MA) and oligo(ethylene glycol) methyl ether methacrylate (y = OEGMA), that is, P(MEO(2)MA(x)-co-OEGMA(y)), to investigate the role of hydrophobicity on the phenomenon of adhesion. The copolymer ratio (x/y) dictates macromolecular changes enabling control of the hydrophilic-to-lipophilic balance (HBL) of the polymer brushes through external triggers such as ionic strength and temperature. We discuss the HBL of the thermobrushes in terms of the surface energy of the substrate by measuring the contact angle at waterdecaneP(MEO(2)MA(x)-co-OEGMA(y)) brush contact line as a function of polymer composition and temperature. Solid supported polyelectrolyte layers grafted with P(MEO(2)MA(x)-co-OEGMA(y)) display a transition in the wettability that is related to the lower critical solution temperature of the polymer brushes. Using experimental observation of the hydrophilic to hydrophobic transition by the contact angle, we extract the underlying energetics associated with liquidliquidsolid adhesion as a function of the copolymer ratio. The change in cellular attachment on P(MEO(2)MA(x)-co-OEGMA(y)) substrates of variable (x/y) composition demonstrates the subtle role of compositional tuning on the ability to control liquidliquidsolid adhesion in biological applications. KW - water/decane contact angle KW - thermoresponsive substrates KW - di(ethylene glycol) methy ether methacrylate KW - oligo(ethylene glycol) methyl ether methacrylate KW - hydrophilic-to-lipophilic balance KW - programmable adhesion Y1 - 2015 U6 - https://doi.org/10.1021/am507418m SN - 1944-8244 VL - 7 IS - 4 SP - 2518 EP - 2528 PB - American Chemical Society CY - Washington ER - TY - GEN A1 - Hildebrand, Viet A1 - Laschewsky, André A1 - Wischerhoff, Erik T1 - Modulating the solubility of zwitterionic poly((3- methacrylamidopropyl)ammonioalkane sulfonate)s in water and aqueous salt solutions via the spacer group separating the cationic and the anionic moieties N2 - Complementary to the well-established zwitterionic monomer 3-((3-methacrylamidopropyl)dimethylammonio) propane-1-sulfonate (SPP), the closely related monomers 2-hydroxy-3-((3-methacrylamidopropyl) dimethylammonio)propane-1-sulfonate (SHPP) and 4-((3-methacrylamidopropyl)dimethylammonio)-butane-1-sulfonate (SBP) were synthesised and polymerised by reversible addition–fragmentation chain transfer (RAFT) polymerisation, using a fluorophore labeled RAFT agent. The polyzwitterions of systematically varied molar masses were characterised with respect to their solubility in water and aqueous salt solutions. Both poly(sulfobetaine)s show thermoresponsive behaviour in water, exhibiting phase separation at low temperatures and upper critical solution temperatures (UCST). For both polySHPP and polySBP, cloud points depend notably on the molar mass, and are much higher in D2O than in H2O. Also, the cloud points are effectively modulated by the addition of salts. The individual effects can be in parts correlated to the Hofmeister series for the anions studied. Still, they depend in a complex way on the concentration and the nature of the added electrolytes, on the one hand, and on the detailed nature of the spacer group separating the anionic and the cationic charges of the betaine moiety, on the other hand. As anticipated, the cloud points of polySBP are much higher than the ones of the analogous polySPP of identical molar mass. Surprisingly, the cloud points of polySHPP are also somewhat higher than the ones of their polySPP analogues, despite the additional hydrophilic hydroxyl group present in the spacer separating the ammonium and the sulfonate moieties. These findings point to a complicated interplay of the various hydrophilic components in polyzwitterions with respect to their overall hydrophilicity. Thus, the spacer group in the betaine moiety proves to be an effective additional molecular design parameter, apparently small variations of which strongly influence the phase behaviour of the polyzwitterions in specific aqueous environments. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 309 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-103040 SP - 731 EP - 740 ER - TY - JOUR A1 - Zerball, Maximilian A1 - Laschewsky, André A1 - von Klitzing, Regine T1 - Swelling of Polyelectrolyte Multilayers: The Relation Between, Surface and Bulk Characteristics JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - The odd even effect, i.e., the influence of the outermost layer of polyelectrolyte multilayers (PEMs) on their swelling behavior, is investigated. For that purpose poly(styrene sodium sulfonate) (PSS)/poly(diallyl-dimethylammonium chloride) (PDADMAC) polyelectrolyte multilayers are studied in air with 1% relative humidity (RH), 30% RH, 95% RH, and in liquid water by ellipsometry, atomic force microscopy (AFM), and X-ray reflectometry (XRR). Since the total amount of water uptake in swollen PEMs is divided into two fractions, the void water and the swelling water, a correct evaluation of the odd even effect is only possible if both fractions are examined separately. In order to allow measuring samples over a larger thickness regime the investigation of a larger amount of samples is required. Therefore, the concept of separating void water from swelling water using neutron reflectometry is for the first time transferred to ellipsometry. The subsequent analysis of swelling water, void water, and roughness revealed the existence of two types of odd even effects: an odd even effect which addresses only the surface of the PEM (surface-odd even effect) and an odd even effect which addresses also the bulk of the PEM (bulk-odd even effect). The appearance of both effects is dependent on the environment; the surface-odd even effect is only detectable in humid air while the bulk-odd even effect is only detectable in liquid water. The bulk-odd even effect is related to the osmotic pressure between the PEM and the surrounding water. A correlation between the amount of void water and both odd even effects is not found. The amount of void water is independent of the terminated layer and the thickness of PEMs. Y1 - 2015 U6 - https://doi.org/10.1021/acs.jpcb.5b04350 SN - 1520-6106 VL - 119 IS - 35 SP - 11879 EP - 11886 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Zhong, Qi A1 - Metwalli, Ezzeldin A1 - Rawolle, Monika A1 - Kaune, Gunar A1 - Bivigou Koumba, Achille Mayelle A1 - Laschewsky, André A1 - Papadakis, Christine M. A1 - Cubitt, Robert A1 - Müller-Buschbaum, Peter T1 - Rehydration of Thermoresponsive Poly(monomethoxydiethylene glycol acrylate) Films Probed in Situ by Real-Time Neutron Reflectivity JF - Macromolecules : a publication of the American Chemical Society N2 - The rehydration of thermoresponsive poly(monomethoxydiethylene glycol acrylate) (PMDEGA) films exhibiting a lower critical solution temperature (LCST) type demixing phase transition in aqueous environments, induced by a decrease in temperature, is investigated in situ with real-time neutron reflectivity. Two different starting conditions (collapsed versus partially swollen chain conformation) are compared. In one experiment, the temperature is reduced from above the demixing temperature to well below the demixing temperature. In a second experiment, the starting temperature is below the demixing temperature, but within the transition regime, and reduced to the same final temperature. In both cases, the observed rehydration process can be divided into three stages: first condensation of water from the surrounding atmosphere, then absorption of water by the PMDEGA film and evaporation of excess water, and finally, rearrangement of the PMDEGA chains. The final rehydrated film is thicker and contains more absorbed water as compared with the initially swollen film at the same temperature well below the demixing temperature. Y1 - 2015 U6 - https://doi.org/10.1021/acs.macromol.5b00645 SN - 0024-9297 SN - 1520-5835 VL - 48 IS - 11 SP - 3604 EP - 3612 PB - American Chemical Society CY - Washington ER -