TY - JOUR A1 - Bechthold, Nina A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Friberg, Stig E. T1 - Structure Formation in polymer-modified liquid crystals Y1 - 1999 ER - TY - JOUR A1 - Bertz, Andreas A1 - Wöhl-Bruhn, Stefanie A1 - Miethe, Sebastian A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Hust, Michael A1 - Bunjes, Heike A1 - Menzel, Henning T1 - Encapsulation of proteins in hydrogel carrier systems for controlled drug delivery influence of network structure and drug size on release rate JF - Journal of biotechnology N2 - Novel hydrogels based on hydroxyethyl starch modified with polyethylene glycol methacrylate (HES-P(EG)(6)MA) were developed as delivery system for the controlled release of proteins. Since the drug release behavior is supposed to be related to the pore structure of the hydrogel network the pore sizes were determined by cryo-SEM, which is a mild technique for imaging on a nanometer scale. The results showed a decreasing pore size and an increase in pore homogeneity with increasing polymer concentration. Furthermore, the mesh sizes of the hydrogels were calculated based on swelling data. Pore and mesh size were significantly different which indicates that both structures are present in the hydrogel. The resulting structural model was correlated with release data for bulk hydrogel cylinders loaded with FITC-dextran and hydrogel microspheres loaded with FITC-IgG and FITC-dextran of different molecular size. The initial release depended much on the relation between hydrodynamic diameter and pore size while the long term release of the incorporated substances was predominantly controlled by degradation of the network of the much smaller meshes. KW - Hydrogel KW - Hydrogel microspheres KW - Network structure KW - Release studies KW - Protein delivery KW - Mesh size Y1 - 2013 U6 - https://doi.org/10.1016/j.jbiotec.2012.06.036 SN - 0168-1656 VL - 163 IS - 2 SP - 243 EP - 249 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Bourgat, Yannick A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Menzel, Henning T1 - Enzyme degradable polymersomes from chitosan-g-[poly-l-lysine-block-epsilon-caprolactone] copolymer JF - Macromolecular bioscience N2 - The scope of this study includes the synthesis of chitosan-g-[peptide-poly-epsilon-caprolactone] and its self-assembly into polymeric vesicles employing the solvent shift method. In this way, well-defined core-shell structures suitable for encapsulation of drugs are generated. The hydrophobic polycaprolactone side-chain and the hydrophilic chitosan backbone are linked via an enzyme-cleavable peptide. The synthetic route involves the functionalization of chitosan with maleimide groups and the preparation of polycaprolactone with alkyne end-groups. A peptide functionalized with a thiol group on one side and an azide group on the other side is prepared. Thiol-ene click-chemistry and azide-alkyne Huisgen cycloaddition are then used to link the chitosan and poly-epsilon-caprolactone chains, respectively, with this peptide. For a preliminary study, poly-l-lysin is a readily available and cleavable peptide that is introduced to investigate the feasibility of the system. The size and shape of the polymersomes are studied by dynamic light scattering and cryo-scanning electron microscopy. Furthermore, degradability is studied by incubating the polymersomes with two enzymes, trypsin and chitosanase. A dispersion of polymersomes is used to coat titanium plates and to further test the stability against enzymatic degradation. KW - chitosan KW - click chemistry KW - drug delivery system KW - enzyme KW - polymersomes KW - poly‐ ε ‐ caprolactone Y1 - 2020 U6 - https://doi.org/10.1002/mabi.202000259 SN - 1616-5187 SN - 1616-5195 VL - 21 IS - 1 SP - 1 EP - 9 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Bressel, Katharina A1 - Prevost, Sylvain A1 - Appavou, Marie-Sousai A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Gradzielski, Michael T1 - Phase behaviour and structure of zwitanionic mixtures of perfluorocarboxylates and tetradecyldimethylamine oxide-dependence on chain length of the perfluoro surfactant JF - Soft matter N2 - Phase behaviour and the mesoscopic structure of zwitanionic surfactant mixtures based on the zwitterionic tetradecyldimethylamine oxide (TDMAO) and anionic lithium perfluoroalkyl carboxylates have been investigated for various chain lengths of the perfluoro surfactant with an emphasis on spontaneously forming vesicles. These mixtures were studied at a constant total concentration of 50 mM and characterised by means of dynamic light scattering (DLS), electric conductivity, small-angle neutron scattering (SANS), viscosity, and cryo-scanning electron microscopy (Cryo-SEM). No vesicles are formed for relatively short perfluoro surfactants. The extension of the vesicle phase becomes substantially larger with increasing chain length of the perfluoro surfactant, while at the same time the size of these vesicles increases. Head group interactions in these systems play a central role in the ability to form vesicles, as already protonating 10 mol% of the TDMAO largely enhances the propensity for vesicle formation. The range of vesicle formation in the phase diagram is not only substantially enlarged but also extends to shorter perfluoro surfactants, where without protonation no vesicles would be formed. The size and polydispersity of the vesicles are related to the chain length of the perfluoro surfactant, the vesicles becoming smaller and more monodisperse with increasing perfluoro surfactant chain length. The ability of the mixed systems to form well-defined unilamellar vesicles accordingly can be controlled by the length of the alkyl chain of the perfluorinated surfactant and depends strongly on the charge conditions, which can be tuned easily by pH-variation. Y1 - 2011 U6 - https://doi.org/10.1039/c1sm05618b SN - 1744-683X VL - 7 IS - 23 SP - 11232 EP - 11242 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Couturier, Jean-Philippe A1 - Wischerhoff, Erik A1 - Bernin, Robert A1 - Hettrich, Cornelia A1 - Koetz, Joachim A1 - Sutterlin, Martin A1 - Tiersch, Brigitte A1 - Laschewsky, Andre T1 - Thermoresponsive Polymers and Inverse Opal Hydrogels for the Detection of Diols JF - Langmuir N2 - Responsive inverse opal hydrogels functionalized by boroxole moieties were synthesized and explored as sensor platforms for various low molar mass as well as polymeric diols and polyols, including saccharides, glycopolymers and catechols, by exploiting the diol induced modulation of their structural color. The underlying thermoresponsive water-soluble copolymers and hydrogels exhibit a coil-to-globule or volume phase transition, respectively, of the LCST-type. They were prepared from oligoethylene oxide methacrylate (macro)monomers and functionalized via copolymerization to bear benzoboroxole moieties. The resulting copolymers represent weak polyacids, which can bind specifically to diols within an appropriate pH window. Due to the resulting modulation of the overall hydrophilicity of the systems and the consequent shift of their phase transition temperature, the usefulness of such systems for indicating the presence of catechols, saccharides, and glycopolymers was studied, exploiting the diol/polyol induced shifts of the soluble polymers’ cloud point, or the induced changes of the hydrogels’ swelling. In particular, the increased acidity of benzoboroxoles compared to standard phenylboronic acids allowed performing the studies in PBS buffer (phosphate buffered saline) at the physiologically relevant pH of 7.4. The inverse opals constructed of these thermo- and analyte-responsive hydrogels enabled following the binding of specific diols by the induced shift of the optical stop band. Their highly porous structure enabled the facile and specific optical detection of not only low molar mass but also of high molar mass diol/polyol analytes such as glycopolymers. Accordingly, such thermoresponsive inverse opal systems functionalized with recognition units represent attractive and promising platforms for the facile sensing of even rather big analytes by simple optical means, or even by the bare eye. Y1 - 2016 U6 - https://doi.org/10.1021/acs.langmuir.6b00803 SN - 0743-7463 VL - 32 SP - 4333 EP - 4345 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Diehl, Christina A1 - Cernoch, Peter A1 - Zenke, Ingrid A1 - Runge, Heike A1 - Pitschke, Rona A1 - Hartmann, Juergen A1 - Tiersch, Brigitte A1 - Schlaad, Helmut T1 - Mechanistic study of the phase separation/crystallization process of poly(2-isopropyl-2-oxazoline) in hot water N2 - The kinetics of the crystallization of thermoresponsive poly(2-isopropyl-2-oxazoline) in water and the time- dependent evolution of the morphology were examined using wide-angle X-ray scattering and conventional and cryogenic scanning electron microscopy. Results indicate that a temperature-induced phase separation produces a bicontinuous polymer network-like structure, which with the onset of crystallization collapses into individual particles (1-2 mu m in diameter) composed of a porous fiber mesh. Nanofibers then preferentially form at the particle surface, thus wrapping the microspheres like a ball of wool. The particle morphology is severely affected by changes in temperature and less by the initial polymer concentration. Y1 - 2010 UR - http://www.rsc.org/Publishing/Journals/sm/index.asp U6 - https://doi.org/10.1039/C0sm00114g SN - 1744-683X ER - TY - JOUR A1 - Dolya, Natalya A1 - Rojas, Oscar A1 - Kosmella, Sabine A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Kudaibergenov, Sarkyt T1 - "One-Pot" in situ frmation of Gold Nanoparticles within Poly(acrylamide) Hydrogels JF - Macromolecular chemistry and physics N2 - This paper focuses on two different strategies to incorporate gold nanoparticles (AuNPs) into the matrix of polyacrylamide (PAAm) hydrogels. Poly(ethyleneimine) (PEI) is used as both reducing and stabilizing agent for the formation of AuNPs. In addition, the influence of an ionic liquid (IL) (i.e., 1-ethyl-3-methylimidazolium ethylsulfate) on the stability of the nanoparticles and their immobilization in the hydrogel is investigated The results show that AuNPs surrounded by a shell containing PEI and IL, synthesized according to the one-pot approach, are much better immobilized within the PAAm hydrogel. Hereby, the IL is responsible for structural changes in the hydrogel as well as the improved stabilization and embedding of the AuNPs into the polymer gel matrix. KW - gold nanoparticles KW - immobilization KW - ionic liquids KW - poly(acrylamide) hydrogels Y1 - 2013 U6 - https://doi.org/10.1002/macp.201200727 SN - 1022-1352 VL - 214 IS - 10 SP - 1114 EP - 1121 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Grobosch, Thomas A1 - Schilde, Uwe A1 - Tiersch, Brigitte T1 - Abtrennung von Arsen und anderer Schwermetalle mit imprägnierten Adsorberpolymeren - teil 2: Abtrennung von Blei, Kupfer, Nickel und Zink Y1 - 2006 UR - http://www3.interscience.wiley.com/cgi-bin/jhome/60500203/ U6 - https://doi.org/10.1002/cite.200500171 SN - 0009-286X ER - TY - JOUR A1 - Großkopf, Sören A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Mix, Andreas A1 - Hellweg, Thomas T1 - Shear-Induced Transformation of Polymer-Rich Lamellar Phases to Micron-Sized Vesicles JF - Langmuir N2 - In the present work, we study the shear-induced transformation of polymer-rich lamellar phases into vesicles. The evolution of vesicle size is studied by different scattering techniques, rheology, and microscopy methods. The lamellar phase found in the system D2O/o-xylene/Pluronic PE9400/C(8)TAB can be fully transformed to multilamellar vesicles (MLVs) by applying shear. The size of the MLVs is proportional to the inverse square root of the shear rate. Hence, the polymer based quaternary system behaves similar to lamellar phases based on small surfactant molecules. Additionally, we found a growth effect leading to a size increase of the vesicles after shearing was stopped. Y1 - 2019 U6 - https://doi.org/10.1021/acs.langmuir.8602786 SN - 0743-7463 VL - 35 IS - 8 SP - 3048 EP - 3057 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Haase, Martin F. A1 - Grigoriev, Dmitry A1 - Moehwald, Helmuth A1 - Tiersch, Brigitte A1 - Shchukin, Dmitry G. T1 - Encapsulation of amphoteric substances in a pH-sensitive pickering emulsion N2 - Oil-in-water (o/w) Pickering emulsions stabilized with silica nanoparticles were prepared. Droplets of diethyl phthalate (oil phase) act as reservoirs for 8-hydroxyquinoline (8-HQ), which is used as (a) the hydrophobizing agent for the silica particles and (b) an encapsulated corrosion inhibitor for application in active feedback coatings. The hydrophobization of silica nanoparticles with 8-HQ is determined by the amount of this agent adsorbed on the nanoparticle surface. The latter is governed by the 8-HQ concentration in the aqueous phase, which in turn depends on the degree of protonation and fir ally on the pH. We observe three ranges of 8-HQ adsorption value with respect to nanoparticle hydophobization: (I) insufficient, (2) sufficient, and (3) excessive adsorption by the formation of an 8-HQ bilayer, where only case 2 leads to the necessary nanoparticle hydrophobization. Hence emulsions stable in a narrow pH window between pH 5.5 and 4.4 follow. Here functional molecules are sufficiently charged to compensate for the charges on silica nanoparticles to make them interfacially active and thus able to stabilize an emulsion but they are still to a large extent uncharged and thereby remain in the oil phase. The emulsification is reversible upon changing the pH to a value beyond the stability region. Y1 - 2010 UR - http://pubs.acs.org/journal/jpccck U6 - https://doi.org/10.1021/Jp104052s SN - 1932-7447 ER -