TY - THES A1 - Gentsch, Rafael T1 - Complex bioactive fiber systems by means of electrospinning T1 - Komplexe Bioaktive Fasersysteme mittels Elektrospinnen N2 - Nanofibrous mats are interesting scaffold materials for biomedical applications like tissue engineering due to their interconnectivity and their size dimension which mimics the native cell environment. Electrospinning provides a simple route to access such fiber meshes. This thesis addresses the structural and functional control of electrospun fiber mats. In the first section, it is shown that fiber meshes with bimodal size distribution could be obtained in a single-step process by electrospinning. A standard single syringe set-up was used to spin concentrated poly(ε-caprolactone) (PCL) and poly(lactic-co-glycolic acid) (PLGA) solutions in chloroform and meshes with bimodal-sized fiber distribution could be directly obtained by reducing the spinning rate at elevated humidity. Scanning electron microscopy (SEM) and mercury porosity of the meshes suggested a suitable pore size distribution for effective cell infiltration. The bimodal fiber meshes together with unimodal fiber meshes were evaluated for cellular infiltration. While the micrometer fibers in the mixed meshes generate an open pore structure, the submicrometer fibers support cell adhesion and facilitate cell bridging on the large pores. This was revealed by initial cell penetration studies, showing superior ingrowth of epithelial cells into the bimodal meshes compared to a mesh composed of unimodal 1.5 μm fibers. The bimodal fiber meshes together with electrospun nano- and microfiber meshes were further used for the inorganic/organic hybrid fabrication of PCL with calcium carbonate or calcium phosphate, two biorelevant minerals. Such composite structures are attractive for the potential improvement of properties such as stiffness or bioactivity. It was possible to encapsulate nano and mixed sized plasma-treated PCL meshes to areas > 1 mm2 with calcium carbonate using three different mineralization methods including the use of poly(acrylic acid). The additive seemed to be useful in stabilizing amorphous calcium carbonate to effectively fill the space between the electrospun fibers resulting in composite structures. Micro-, nano- and mixed sized fiber meshes were successfully coated within hours by fiber directed crystallization of calcium phosphate using a ten-times concentrated simulated body fluid. It was shown that nanofibers accelerated the calcium phosphate crystallization, as compared to microfibers. In addition, crystallizations performed at static conditions led to hydroxyapatite formations whereas in dynamic conditions brushite coexisted. In the second section, nanofiber functionalization strategies are investigated. First, a one-step process was introduced where a peptide-polymer-conjugate (PLLA-b-CGGRGDS) was co-spun with PLGA in such a way that the peptide is enriched on the surface. It was shown that by adding methanol to the chloroform/blend solution, a dramatic increase of the peptide concentration at the fiber surface could be achieved as determined by X-ray photoelectron spectroscopy (XPS). Peptide accessibility was demonstrated via a contact angle comparison of pure PLGA and RGD-functionalized fiber meshes. In addition, the electrostatic attraction between a RGD-functionalized fiber and a silica bead at pH ~ 4 confirmed the accessibility of the peptide. The bioactivity of these RGD-functionalized fiber meshes was demonstrated using blends containing 18 wt% bioconjugate. These meshes promoted adhesion behavior of fibroblast compared to pure PLGA meshes. In a second functionalization approach, a modular strategy was investigated. In a single step, reactive fiber meshes were fabricated and then functionalized with bioactive molecules. While the electrospinning of the pure reactive polymer poly(pentafluorophenyl methacrylate) (PPFPMA) was feasible, the inherent brittleness of PPFPMA required to spin a PCL blend. Blends and pure PPFPMA showed a two-step functionalization kinetics. An initial fast reaction of the pentafluorophenyl esters with aminoethanol as a model substance was followed by a slow conversion upon further hydrophilization. This was analysed by UV/Vis-spectroscopy of the pentaflurorophenol release upon nucleophilic substitution with the amines. The conversion was confirmed by increased hydrophilicity of the resulting meshes. The PCL/PPFPMA fiber meshes were then used for functionalization with more complex molecules such as saccharides. Aminofunctionalized D-Mannose or D-Galactose was reacted with the active pentafluorophenyl esters as followed by UV/Vis spectroscopy and XPS. The functionality was shown to be bioactive using macrophage cell culture. The meshes functionalized with D-Mannose specifically stimulated the cytokine production of macrophages when lipopolysaccharides were added. This was in contrast to D-Galactose- or aminoethanol-functionalized and unfunctionalized PCL/PPFPMA fiber mats. N2 - Biofunktionale Materialien gewinnen immer größere Bedeutung in biomedizinischen Anwendungen wie dem künstlichen Ersatz von Knochen oder Blutgefässe. Weiterhin können diese Stoffe nützlich sein, um die Wechselwirkung zwischen Biomaterialien und biologischen Systemen wie Zellen oder Organismen weiter zu erforschen. In diversen Studien konnten Größen wie dreidimensionaler Strukturaufbau, Oberflächentopographie, Mechanik und die Funktionalisierung mit bioaktiven Substanzen als Einflussfaktoren identifiziert werden, welche auf verschiedenen Größenskalen von makroskopisch bis nanoskopisch untersucht wurden und gegenwärtig erforscht werden. Bioinspiriert von Kollagenfasern, die als Strukturmotiv an verschieden Orten im menschlichen Körper vorkommen (z.B. extrazelluläre Matrix) konnte gezeigt werden, dass Fasermatten, die eine ähnliche Größendimensionen wie die vorher erwähnten Kollagenfasern (Ø ~ 500 nm) aufweisen, eine aussichtsreiche Gerüstmatrix darstellen. Eine einfache Methode Fasermatten in diesen Dimensionen herzustellen ist Elektrospinning, wobei typischerweise eine viskose Polymerlösung durch anlegen eines Hochspannungsfeldes verstreckt wird. Obwohl auf diese Weise hergestellte Fasermatten für gewisse Zelllinien eine ideale Zellwechselwirkung aufweisen, ist die Zellbesiedelung solcher Netzwerke, bedingt auch durch die kleinen Porendurchmesser, problematisch und bedarf meistens weiterer Prozessierungsschritte. Diese Arbeit beschäftigt sich mit der einfachen Herstellung von strukturel und funktional kontrollierten Fasersystem mittels Elektrospinning. Der erste Teil behandelt ein Einschrittverfahren zum Elektrospinnen von bimodalen Fasermatten bestehend aus Nano- und Mikrofasern. In Zellstudien mit Epithelzellen konnte gezeigt werden, dass solche Netzwerke tiefer besiedelt werden als Matten bestehend aus unimodalen 1.5 μm dicken Fasern. Des Weiteren wurden diese Fasermatten für fasergerichtete Kristallisation von Kalziumcarbonat und – phosphat benutzt. In einem zweiten Teil wurden 2 Strategien für die Faserfunktionalisierung mit Peptiden und Zuckermolekülen entwickelt. Zum einen wurde gezeigt, dass funktionale Peptidfasern durch Verspinnung einer Mischung von einem Peptid-Polymer-Konjugat mit einem kommerziellen Polymer hergestellt werden konnten. Zusätzlich wurde ein modularer Ansatz für die Herstellung von reaktiven Fasern ausgearbeitet, die anschließend mit Peptiden oder Zuckern funktionalisiert wurden. Die Bioaktivität der Zucker funktionalisierten Fasern konnte durch Zellversuche erfolgreich bestätigt werden. KW - Elektrospinnen KW - Faser KW - bioaktiv KW - funktional KW - Struktur KW - electrospinning KW - fiber KW - bioactive KW - functional KW - structure Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-44900 ER - TY - THES A1 - Sinn, Cornelia G. T1 - Ion binding to polymers and lipid membranes in aqueous solutions : Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen N2 - Ziel dieser Arbeit ist die Untersuchung der Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen. Im ersten Teil dieser Arbeit wurde der Einfluss verschiedener anorganischer Salze und Polyelektrolyte auf die Struktur des Wassers mit Hilfe Isothermer Mikrotitrationskalorimetrie (ITC) erforscht. Die Verdünnungswärme der Salze wurde als Maß für die Fähigkeit der Ionen, die geordnete Struktur des Wassers zu stabilisieren oder zu zerstören, verwendet. Die Verdünnungswärmen konnten auf Hofmeister Effekte zurückgeführt werden. Im Anschluss daran wurde die Bindung von Ca2+ an Natrium- Poly(acrylsäure) (NaPAA) untersucht. Mit Hilfe von ITC und einer Ca2+- selektiven Elektrode wurde die Reaktionsenthalpie und Bindungsisotherme gemessen. Es wurde gezeigt, dass die Binding von Ca2+ - Ionen an NaPAA stark endotherm und daher entropiegetrieben ist. Anschließend wurde die Bindung von Ca2+ an die eindimensionale Polymerkette mit der an ein Lipidvesikel mit denselben funktioniellen Gruppen verglichen. Es wurde beobachtet, dass die Ionenbindung –wie auch im Fall des Polymers- endotherm ist. Ein Vergleich der Ca2+- Bindung an die Lipidmembran mit der an das Polymer konnte zeigen, dass das Ion schwächer an die Membran bindet. Im Zusammenhang mit diesen Experimenten wurde auch beobachtet, dass Ca2+ nicht nur an geladene, sondern auch an zwitterionische Lipidvesikel bindet. Schließlich wurde die Wechselwirkung zweier Salze, KCl and NaCl, mit einem neutralen Polymergel, PNIPAAM, und dem geladenen Polymer PAA untersucht. Mit Hilfe von Kalorimetrie und einer kaliumselektiven Elektrode wurde beobachtet, dass die Ionen mit beiden Polymeren wechselwirken, unabhängig davon, ob diese Ladungen tragen, oder nicht. N2 - The goal of this work was to study the binding of ions to polymers and lipid bilayer membranes in aqueous solutions. In the first part of this work, the influence of various inorganic salts and polyelectrolytes on the structure of water was studied using Isothermal Titration Calorimetry (ITC). The heat of dilution of the salts was used as a scale of water structure making and breaking of the ions. The heats of dilution could be attributed to the Hofmeister Series. Following this, the binding of Ca2+ to poly(sodium acrylate) (NaPAA) was studied. ITC and a Ca2+ Ion Selective Electrode were used to measure the reaction enthalpy and binding isotherm. Binding of Ca2+ ions to PAA, was found to be highly endothermic and therefore solely driven by entropy. We then compared the binding of ions to the one-dimensional PAA polymer chain to the binding to lipid vesicles with the same functional groups. As for the polymer, Ca2+ binding was found to be endothermic. Binding of calcium to the lipid bilayer was found to be weaker than to the polymer. In the context of these experiments, it was shown that Ca2+ not only binds to charged but also to zwitterionic lipid vesicles. Finally, we studied the interaction of two salts, KCl and NaCl, to a neutral polymer gel, PNIPAAM, and to the ionic polymer PAA. Combining calorimetry and a potassium selective electrode we observed that the ions interact with both polymers, whether containing charges or not. T2 - Ion binding to polymers and lipid membranes in aqueous solutions : Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen KW - Ionen KW - Bindung KW - Salz KW - Wasser KW - Struktur KW - Hofmeister KW - Polyelektrolyt KW - Isotherme Titrationskalorimetrie KW - ionenselektive Elektrode KW - Vesikel KW - Calcium KW - Micr KW - ions KW - binding KW - salt KW - water KW - structure KW - Hofmeister KW - polyelectrolyte KW - Isothermal Titration Calorimetry KW - ion selective electrode KW - vesicle KW - calcium KW - micro Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001778 ER -