TY - JOUR A1 - Brosnan, Sarah M. A1 - Schlaad, Helmut A1 - Antonietti, Markus T1 - Aqueous Self-Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Self-assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self-assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500nm) and microsized (>5m) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics. KW - block copolymers KW - polymersomes KW - polysaccharides KW - self-assembly KW - vesicles Y1 - 2015 U6 - https://doi.org/10.1002/anie.201502100 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 33 SP - 9715 EP - 9718 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Börner, Hans Gerhard T1 - Exploiting self-organization and functionality of peptides for polymer science T1 - Peptide im Dienste der Polymerwissenschaften : Kontrolle der Selbstorganisation und der Funktionalität N2 - Controlling interactions in synthetic polymers as precisely as in proteins would have a strong impact on polymer science. Advanced structural and functional control can lead to rational design of, integrated nano- and microstructures. To achieve this, properties of monomer sequence defined oligopeptides were exploited. Through their incorporation as monodisperse segments into synthetic polymers we learned in recent four years how to program the structure formation of polymers, to adjust and exploit interactions in such polymers, to control inorganic-organic interfaces in fiber composites and induce structure in Biomacromolecules like DNA for biomedical applications. N2 - Die Kontrolle von Wechselwirkungen in synthetischen Polymersystemen mit vergleichbarer Präzision wie in Polypeptiden und Proteinen hätte einen dramatischen Einfluss auf die Möglichkeiten in den Polymer- und Materialwissenschaften. Um dies zu erreichen, werden im Rahmen dieser Arbeit Eigenschaften von Oligopeptiden mit definierter Monomersequenz ausgenutzt. Die Integration dieser monodispersen Biosegmente in synthetische Polymere erlaubt z. B. den Aufbau von Peptid-block-Polymer Copolymeren. In solchen sogenannten Peptid-Polymer-Konjugaten sind die Funktionalitäten, die Sekundärwechselwirkungen und die biologische Aktivität des Peptidsegments präzise programmierbar. In den vergangen vier Jahren konnte demonstriert werden, wie in Biokonjugatsystemen die Mikrostrukturbildung gesteuert werden kann, wie definierte Wechselwirkungen in diesen Systemen programmiert und ausgenutzt werden können und wie Grenzflächen zwischen anorganischen und organischen Komponenten in Faserkompositmaterialien kontrolliert werden können. Desweiteren konnten Peptid-Polymer-Konjugate verwendet werden, um für biomedizinische Anwendungen DNS gezielt zu komprimieren oder Zelladhäsion auf Oberflächen zu steuern. KW - Peptid-Polymer-Konjugate KW - Biokonjugate KW - Selbstorganisation KW - peptide-polymer conjugate KW - bioconjugate KW - self-assembly Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29066 ER - TY - THES A1 - Franke, Danielle T1 - Novel surfactants for the production of functional nanostructured materials via the ionic self-assembly (ISA) route = Neuartige Tenside für die Synthese funktioneller nanostrukturierter Materialien durch ionische Selbsorganisation T1 - Neuartige Tenside für die Synthese funktioneller nanostrukturierter Materialien durch ionische Selbsorganisation N2 - In recent years, the aim of supramolecular syntheses is not only the creation of particular structures but also the introduction of specific functions in these supramolecules. The present work describes the use of the ionic self-assembly (ISA) route to generate nanostructured materials with integrated functionality. Since the ISA strategy has proved to be a facile method for the production of liquid-crystalline materials, we investigated the phase behaviour, physical properties and function of a variety of ISA materials comprising a perylene derivative as the employed oligoelectrolyte. Functionality was introduced into the materials through the use of functional surfactants. In order to meet the requirements to produce functional ISA materials through the use of functional surfactants, we designed and synthesized pyrrole-derived monomers as surfactant building blocks. Owing to the presence of the pyrrole moiety, these surfactants are not only polymerizable but are also potentially conductive when polymerized. We adopted single-tailed and double-tailed N-substituted pyrrole monomers as target molecules. Since routine characterization analysis of the double-tailed pyrrole-containing surfactant indicated very interesting, complex phase behaviour, a comprehensive investigation of its interfacial properties and mesophase behavior was conducted. The synthesized pyrrole-derived surfactants were then employed in the synthesis of ISA complexes. The self-assembled materials were characterized and subsequently polymerized by both chemical and electrochemical methods. The changes in the structure and properties of the materials caused by the in-situ polymerization were addressed. In the second part of this work, the motif investigated was a property rather than a function. Since chiral superstructures have obtained much attention during the last few years, we investigated the possibility of chiral ISA materials through the use of chiral surfactants. Thus, the work involved synthesis of novel chiral surfactants and their incorporation in ISA materials with the aim of obtaining ionically self-assembled chiral superstructures. The results and insights presented here suggest that the presented synthesis strategy can be easily extended to incorporate any kind of charged tectonic unit with desired optical, electrical, or magnetic properties into supramolecular assemblies for practical applications. N2 - Supramolekulare Chemie zielt auf den Aufbau großer Moleküle und neuer Materialien aus kleineren Einheiten. Durch supramolekulare Wechselwirkungen d.h. nicht-kovalente Bindungen, können definierte Ordnungen von Molekülverbänden in Größen von mehreren 100 Mikrometern hergestellt werden. Diese Wechselwirkungen und die daraus resultierenden Anordnungen von Molekülen bestimmen die für Anwendungen relevanten makroskopischen Materialeigenschaften. Es gibt viele verschiedene Wechselwirkungen, die in der Supramolekularen Chemie angewendet werden können. Eine davon ist die ionische Wechselwirkung, die in dieser Arbeit als Triebkraft für die Herstellung supramolekularer Materialien verwendet wird. Diese Strategie wurde vor kurzem ISA (Ionic-Self-Assembly, d.h. Ionische Selbsorganisation) genannt. Die vorliegende Arbeit beschäftigt sich mit der Herstellung funktioneller Nanomaterialen durch die Anwendung der ISA-Strategie. Da sich die ISA-Strategie als einfache Methode für die Produktion von Flüssigkristallen herausstellte, untersuchten wir die Eigenschaften vieler ISA-Materialen, die einen Farbstoffbaustein integriert haben. Die Funktion der Materialien wurde hierbei durch die Verwendung funktioneller Tenside geschaffen. Um die Anforderungen für die Produktion funktioneller ISA-Materialen durch die Nutzung funktioneller Tenside sicherzustellen, wurden Pyrrol-Monomere als Tenside hergestellt. Durch die Pyrrol-Einheiten sind die Tenside polymerisierbar und zeigen danach Potential für Leitfähigkeit. Es wurden Pyrrol-Tenside sowohl mit Einzel- als auch mit Doppelketten synthetisiert. Da die Standardcharakterisierung des Doppelketten-Tensids ein interessantes Phasenverhalten zeigte, wurden umfassende Untersuchungen der Grenzflächeneigenschaften und des mesophasen Verhaltens durchgeführt. Beide Tenside wurden dann in der Produktion von ISA-Materialien verwendet. Die hergestellten Materialen wurden charakterisiert und konnten durch die Pyrrol-Einheit sowohl chemisch als auch elektrochemisch polymerisiert werden. Die aus dieser Polymerisierung resultierenden Änderungen der Eigenschaften, Struktur und Function der Materialen wurden ebenfalls untersucht. Der zweite Teil dieser Arbeit klärt Nutzungsmöglichkeiten chiraler Tenside für die Herstellung chiraler ISA-Strukturen. Obwohl Chiralität keine eigentliche Funktion sondern eine Eigenschaft ist, haben chirale Strukturen in den letzten Jahren viel Aufmerksamkeit bekommen. Deshalb wurden, mit dem Ziel chirale ISA-Strukturen zu erhalten, neue chirale Tenside hergestellt und diese als Bausteine in ISA-Materialien benutzt. Die mit dieser Arbeit gewonnenen Ergebnisse und neuen Einsichten zeigen, dass die ISA-Strategie leicht erweitert werden kann, um jede Art von Bausteine zu integrieren. Dadurch können nanostukturierte Materialien mit gewünschten spezifischen optischen, elektrischen oder elektromagnetischen Eigenschaften für praktische Anwendungen geschaffen werden. KW - Nanotechnologie KW - Tenside KW - ISA KW - Surfactant KW - Nanotechnology KW - self-assembly Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6922 ER - TY - THES A1 - Heck, Christian T1 - Gold and silver nanolenses self-assembled by DNA origami T1 - Gold- und Silbernanolinsen, selbstassembliert durch DNA-Origami N2 - Nanolenses are linear chains of differently-sized metal nanoparticles, which can theoretically provide extremely high field enhancements. The complex structure renders their synthesis challenging and has hampered closer analyses so far. Here, the technique of DNA origami was used to self-assemble DNA-coated 10 nm, 20 nm, and 60 nm gold or silver nanoparticles into gold or silver nanolenses. Three different geometrical arrangements of gold nanolenses were assembled, and for each of the three, sets of single gold nanolenses were investigated in detail by atomic force microscopy, scanning electron microscopy, dark-field scattering and Raman spectroscopy. The surface-enhanced Raman scattering (SERS) capabilities of the single nanolenses were assessed by labelling the 10 nm gold nanoparticle selectively with dye molecules. The experimental data was complemented by finite-difference time-domain simulations. For those gold nanolenses which showed the strongest field enhancement, SERS signals from the two different internal gaps were compared by selectively placing probe dyes on the 20 nm or 60 nm gold particles. The highest enhancement was found for the gap between the 20 nm and 10 nm nanoparticle, which is indicative of a cascaded field enhancement. The protein streptavidin was labelled with alkyne groups and served as a biological model analyte, bound between the 20 nm and 10 nm particle of silver nanolenses. Thereby, a SERS signal from a single streptavidin could be detected. Background peaks observed in SERS measurements on single silver nanolenses could be attributed to amorphous carbon. It was shown that the amorphous carbon is generated in situ. N2 - Nanolinsen sind Strukturen aus linear angeordneten, unterschiedlich großen metallischen Nanopartikeln. Elektromagnetische Felder können durch sie theoretisch extrem verstärkt werden, aufgrund ihres komplexen Aufbaus sind sie bislang aber wenig erforscht. Im Rahmen dieser Dissertation wurden Nanolinsen mit Hilfe der DNA-Origami-Technik aus DNA-beschichteten 10 nm-, 20 nm- und 60 nm-Gold- oder Silbernanopartikeln hergestellt. Für Goldnanolinsen sind die Partikel dabei in drei unterschiedlichen Geometrien angeordnet worden. Einzelne Goldnanolinsen wurden mittels Rasterkraftmikroskopie, Rasterelektronenmikroskopie, Dunkelfeld- und Ramanspektroskopie untersucht. Um die Raman-Verstärkung quantifizieren zu können, trugen dabei jeweils die 10 nm-Goldpartikel Farbstoffmoleküle in ihrer Beschichtung. Die Interpretation der Messdaten wurde durch numerische Simulationen unterstützt. Nanolinsen zeichnen sich durch eine stufenweise Feldverstärkung aus. Dieser Effekt konnte experimentell bestätigt werden, indem selektiv die 20 nm- oder 60 nm-Partikel von Goldnanolinsen mit Farbstoffen markiert und die resultierenden Raman-Signale verglichen wurden. Ein mit Alkingruppen markiertes Protein ist ortsselektiv in Silbernanolinsen integriert worden. Es war möglich, das für das Alkin charakteristische oberflächenverstärkte Raman-Signal im Spektrum einer einzelnen Nanolinse und damit eines einzelnen Proteins zu beobachten. Bei den Messungen mit Silbernanolinsen sind für amorphe Kohlenstoffspezies charakterstische Hintergrundsignale beobachtet worden. Durch zeitabhängige Messungen konnte gezeigt werden, dass diese Spezies erst in situ gebildet werden. KW - DNA origami KW - gold nanoparticles KW - silver nanoparticles KW - SERS KW - self-assembly KW - plasmonics KW - nanolenses KW - DNA-Origami KW - Goldnanopartikel KW - Silbernanopartikel KW - SERS KW - Selbstassemblierung KW - Plasmonik KW - Nanolinsen Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-409002 ER - TY - JOUR A1 - Kapernaum, Nadia A1 - Lange, Alyna A1 - Ebert, Max A1 - Grunwald, Marco A. A1 - Häge, Christian A1 - Marino, Sebastian A1 - Zens, Anna A1 - Taubert, Andreas A1 - Gießelmann, Frank A1 - Laschat, Sabine T1 - Current topics in ionic liquid crystals JF - ChemPlusChem N2 - Ionic liquid crystals (ILCs), that is, ionic liquids exhibiting mesomorphism, liquid crystalline phases, and anisotropic properties, have received intense attention in the past years. Among others, this is due to their special properties arising from the combination of properties stemming from ionic liquids and from liquid crystalline arrangements. Besides interesting fundamental aspects, ILCs have been claimed to have tremendous application potential that again arises from the combination of properties and architectures that are not accessible otherwise, or at least not accessible easily by other strategies. The current review highlights recent developments in ILC research, starting with some key fundamental aspects. Further subjects covered include the synthesis and variations of modern ILCs, including the specific tuning of their mesomorphic behavior. The review concludes with reflections on some applications that may be within reach for ILCs and finally highlights a few key challenges that must be overcome prior and during true commercialization of ILCs. KW - electrochemistry KW - ionic liquid crystals KW - mesogen mesophases KW - self-assembly KW - X-ray diffraction Y1 - 2021 U6 - https://doi.org/10.1002/cplu.202100397 SN - 2192-6506 VL - 87 IS - 1 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Kedracki, Dawid A1 - Filippov, Sergey K. A1 - Gour, Nidhi A1 - Schlaad, Helmut A1 - Nardin, Corinne T1 - Formation of DNA-Copolymer Fibrils Through an Amyloid-Like Nucleation Polymerization Mechanism JF - Macromolecular rapid communications N2 - Conjugation of a hydrophobic poly(2-oxazoline) bearing tertiary amide groups along its backbone with a short single stranded nucleotide sequence results in an amphiphilic comb/graft copolymer, which organizes in fibrils upon direct dissolution in water. Supported by circular dichroism, atomic force microscopy, transmission electron microscopy, and scattering data, fibrils are formed through inter- and intramolecular hydrogen bonding between hydrogen accepting amide groups along the polymer backbone and hydrogen donating nucleic acid grafts leading to the formation of hollow tubes. KW - DNA copolymers KW - fibers KW - hydrogen bonding KW - nucleation polymerization KW - self-assembly Y1 - 2015 U6 - https://doi.org/10.1002/marc.201400728 SN - 1022-1336 SN - 1521-3927 VL - 36 IS - 8 SP - 768 EP - 773 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Kochovski, Zdravko A1 - Chen, Guosong A1 - Yuan, Jiayin A1 - Lu, Yan T1 - Cryo-Electron microscopy for the study of self-assembled poly(ionic liquid) nanoparticles and protein supramolecular structures JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - Cryo-electron microscopy (cryo-EM) is a powerful structure determination technique that is well-suited to the study of protein and polymer self-assembly in solution. In contrast to conventional transmission electron microscopy (TEM) sample preparation, which often times involves drying and staining, the frozen-hydrated sample preparation allows the specimens to be kept and imaged in a state closest to their native one. Here, we give a short overview of the basic principles of Cryo-EM and review our results on applying it to the study of different protein and polymer self-assembled nanostructures. More specifically, we show how we have applied cryo-electron tomography (cryo-ET) to visualize the internal morphology of self-assembled poly(ionic liquid) nanoparticles and cryo-EM single particle analysis (SPA) to determine the three-dimensional (3D) structures of artificial protein microtubules. KW - self-assembly KW - poly(ionic liquid) nanoparticles KW - protein self-assembly KW - cryo-electron microscopy KW - single particle analysis KW - cryo-electron KW - tomography Y1 - 2020 U6 - https://doi.org/10.1007/s00396-020-04657-w SN - 0303-402X SN - 1435-1536 VL - 298 IS - 7 SP - 707 EP - 717 PB - Springer CY - New York ER - TY - JOUR A1 - Lange, Birger A1 - Wagner, Jürgen A1 - Zentel, Rudolf T1 - Fabrication of robust high-quality ORMOCER (R) inverse opals JF - Macromolecular rapid communications N2 - The nanostructuring of ORMOCER (R) to form inverse opals is described. For this purpose a polymer opal is used as a template and infiltrated with liquid ORMOCER (R). After photopolymerization of the resin the host opal is dissolved in tetrahydrofuran and an ORMOCER (R) inverse opal is obtained. It shows excellent periodicity (by SEM) and optical properties to reveal a high degree of face centered cubic order. This replication process leads to a nanostructured photonic crystal with the outstanding mechanical properties of ORMOCER (R) and high temperature stability up to 350 degrees C. KW - colloids KW - inverse opals KW - ORMOCER (R) KW - photonic crystal KW - self-assembly Y1 - 2006 U6 - https://doi.org/10.1002/marc.200600429 SN - 1022-1336 VL - 27 SP - 1746 EP - 1751 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Mehr, Fatemeh Naderi A1 - Grigoriev, Dmitry A1 - Heaton, Rebecca A1 - Baptiste, Joshua A1 - Stace, Anthony J. A1 - Puretskiy, Nikolay A1 - Besley, Elena A1 - Böker, Alexander T1 - Self-assembly behavior of oppositely charged inverse bipatchy microcolloids JF - Small : nano micro N2 - A directed attractive interaction between predefined "patchy" sites on the surfaces of anisotropic microcolloids can provide them with the ability to self-assemble in a controlled manner to build target structures of increased complexity. An important step toward the controlled formation of a desired superstructure is to identify reversible electrostatic interactions between patches which allow them to align with one another. The formation of bipatchy particles with two oppositely charged patches fabricated using sandwich microcontact printing is reported. These particles spontaneously self-aggregate in solution, where a diversity of short and long chains of bipatchy particles with different shapes, such as branched, bent, and linear, are formed. Calculations show that chain formation is driven by a combination of attractive electrostatic interactions between oppositely charged patches and the charge-induced polarization of interacting particles. KW - electrostatic interactions KW - patchy particles KW - polyelectrolyte inks KW - sandwich microcontact printing KW - self-assembly Y1 - 2020 U6 - https://doi.org/10.1002/smll.202000442 SN - 1613-6810 SN - 1613-6829 VL - 16 IS - 14 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Miasnikova, Anna T1 - New hydrogel forming thermo-responsive block copolymers of increasing structural complexity T1 - Neue Hydrogel-bildende thermisch schaltbare Blockcopolymere von zunehmender struktureller Komplexität N2 - This work describes the synthesis and characterization of stimuli-responsive polymers made by reversible addition-fragmentation chain transfer (RAFT) polymerization and the investigation of their self-assembly into “smart” hydrogels. In particular the hydrogels were designed to swell at low temperature and could be reversibly switched to a collapsed hydrophobic state by rising the temperature. Starting from two constituents, a short permanently hydrophobic polystyrene (PS) block and a thermo-responsive poly(methoxy diethylene glycol acrylate) (PMDEGA) block, various gelation behaviors and switching temperatures were achieved. New RAFT agents bearing tert-butyl benzoate or benzoic acid groups, were developed for the synthesis of diblock, symmetrical triblock and 3-arm star block copolymers. Thus, specific end groups were attached to the polymers that facilitate efficient macromolecular characterization, e.g by routine 1H-NMR spectroscopy. Further, the carboxyl end-groups allowed functionalizing the various polymers by a fluorophore. Because reports on PMDEGA have been extremely rare, at first, the thermo-responsive behavior of the polymer was investigated and the influence of factors such as molar mass, nature of the end-groups, and architecture, was studied. The use of special RAFT agents enabled the design of polymer with specific hydrophobic and hydrophilic end-groups. Cloud points (CP) of the polymers proved to be sensitive to all molecular variables studied, namely molar mass, nature and number of the end-groups, up to relatively high molar masses. Thus, by changing molecular parameters, CPs of the PMDEGA could be easily adjusted within the physiological interesting range of 20 to 40°C. A second responsivity, namely to light, was added to the PMDEGA system via random copolymerization of MDEGA with a specifically designed photo-switchable azobenzene acrylate. The composition of the copolymers was varied in order to determine the optimal conditions for an isothermal cloud point variation triggered by light. Though reversible light-induced solubility changes were achieved, the differences between the cloud points before and after the irradiation were small. Remarkably, the response to light differed from common observations for azobenzene-based systems, as CPs decreased after UV-irradiation, i.e with increasing content of cis-azobenzene units. The viscosifying and gelling abilities of the various block copolymers made from PS and PMDEGA blocks were studied by rheology. Important differences were observed between diblock copolymers, containing one hydrophobic PS block only, the telechelic symmetrical triblock copolymers made of two associating PS termini, and the star block copolymers having three associating end blocks. Regardless of their hydrophilic block length, diblock copolymers PS11 PMDEGAn were freely flowing even at concentrations as high as 40 wt. %. In contrast, all studied symmetrical triblock copolymers PS8-PMDEGAn-PS8 formed gels at low temperatures and at concentrations as low as 3.5 wt. % at best. When heated, these gels underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurs. The gel-sol transition shifted to markedly higher transition temperatures with increasing length of the hydrophilic inner block. This effect increased also with the number of arms, and with the length of the hydrophobic end blocks. The mechanical properties of the gels were significantly altered at the cloud point and liquid-like dispersions were formed. These could be reversibly transformed into hydrogels by cooling. This thesis demonstrates that high molar mass PMDEGA is an easily accessible, presumably also biocompatible and at ambient temperature well water-soluble, non-ionic thermo-responsive polymer. PMDEGA can be easily molecularly engineered via the RAFT method, implementing defined end-groups, and producing different, also complex, architectures, such as amphiphilic triblock and star block copolymers, having an analogous structure to associative telechelics. With appropriate design, such amphiphilic copolymers give way to efficient, “smart” viscosifiers and gelators displaying tunable gelling and mechanical properties. N2 - Diese Arbeit befasst sich mit der RAFT-vermittelten Synthese und Charakterisierung von stimuli-empfindlichen Polymeren und ihrer Selbstorganisation zu „intelligenten” Hydrogelen. Die Hydrogele wurden so entwickelt, dass sie bei niedrigen Temperaturen stark quellen, bei Temperaturerhöhung jedoch reversibel in einem hydrophoben, kollabierten Zustand umgewandelt werden. Mit dem permanent hydrophoben Polystyrol (PS) und dem hydrophilen, thermisch schaltbaren Poly(methoxy-diethylen¬glycol-acrylat) (PMDEGA) als Bausteine, wurden unterschiedliche Gelierungsverhalten und thermische Übergangstemperaturen erreicht. Zur Synthese von Diblock-, symmetrischen Triblock- und dreiarmigen Sternblock-Copolymeren wurden neue funktionelle Kettenüberträger entwickelt. Diese gestatteten es, tert-butyl Benzoeester und Benzoesäure Endgruppen in die Polymere einzubauen, die einerseits eine effiziente Analyse mittels Routine 1H-NMR und darüber hinaus eine spätere Funktionalisierung der Endgruppen mit einer Fluoreszenzsonde ermöglichten. Da über PMDEGA kaum Daten vorlagen, wurde der Einfluss von Molekulargewicht, Endgruppen und Architektur auf das thermo-responsive Verhalten untersucht. Die speziellen Kettenüberträger ermöglichten es, gezielt hydrophobe wie hydrophile Endgruppen in die Polymere einzuführen. Die Trübungspunkte der wässerigen Lösungen von PMDEGA zeigten sich bis zu relativ hohen molaren Massen abhängig gegenüber allen untersuchten Variablen, nämlich dem Molekulargewicht, der Art und Zahl von Endgruppen. Durch Variation der diversen Parameter ließ sich die Schalttemperatur von PMDEGA in physiologisch relevanten Temperaturbereich von 20 bis 40 °C einstellen. Um die Polymere für einen zweiten Stimulus, nämlich Licht, empfindlich zu machen, wurden Azobenzol-funktionalisierte Acrylate synthetisiert und statistisch mit MDEGA copolymerisiert. Die Zusammensetzung der Polymeren wurde variiert und das isotherme Schalten der Löslichkeit durch Licht untersucht. Obwohl ein reversibles Schalten erreicht wurde, waren die Unterschiede zwischen den Trübungstemperaturen von UV-Licht bestrahlten und unbestrahlten Proben nur gering. Interessanterweise senkte die UV-Bestrahlung, d.h. ein erhöhter Gehalt von cis-Azobenzol-Gruppen, die Trübungstemperaturen herab. Dies ist genau umgekehrt als für azobenzolbasierten Systeme klassisch beschrieben. Die Gelbildung der verschiedenen Blockcopolymere von PS und PMDEGA wurde mittels Rheologie untersucht. Dabei traten deutliche Unterschiede auf, zwischen dem Gelierungsverhalten der Diblockcopolymere, die nur einen PS Block enthalten, dem der symmetrischen Triblockcopolymere, die zwei assoziative PS Endblöcken besitzen, und dem der Sternpolymere, die drei assoziative PS Blöcke aufweisen. Unabhängig von der Länge des hydrophilen Blockes, bilden Diblockcopolymere des Typs PS11-PMDEGAn keine Gele, sondern selbst bei hohen Konzentrationen von 40 Gew. % Lösungen. Im Gegensatz dazu bildeten die Triblockcopolymere des Typs PS8-PMDEGAn-PS8 Gele bei niedrigen Temperaturen, vereinzelt schon ab 3.5 wt. %. Mit steigender Temperatur, tritt bereits unterhalb des Trübungspunktes für diese Systeme ein Gel-Sol Übergang auf. Der Gel-Sol Übergang bewegt sich zu höheren Temperaturen mit steigende Länge des hydrophilen inneren Blocks. Dieser Trend verstärkt sich mit zunehmender Anzahl von Endblöcken und deren Länge. An der Trübungstemperatur veränderten sich die mechanischen Eigenschaften aller Gele signifikant und die gebildeten flüssigen Dispersionen ließen sich reversibel beim Abkühlen wieder zu Gel schalten. Diese Arbeit, zeigt dass PMDEGA ein bei niedrigen Temperaturen gut wasserlösliches, nicht-ionisches, thermisch-schaltbares und wahrscheinlich biokompatibles Polymer ist. PMDEGA liest sich einfach mittels den RAFT-Verfahren molekular maßschneiden, mit spezifischen Endgruppen und komplexen Polymerarchitekturen. Solche amphiphilen Triblock- und Sternblock-Copolymeren hoher Molmasse, wirken als assoziative Telechele. Daher eigenen sich bei entsprechendem Design diese amphiphilen Blockcopolymere als effiziente Verdicker und Gelbildner mit einstellbaren mechanischen und thermischen Eigenschaften. KW - Blockcopolymere KW - Selbstorganisation KW - thermisch schaltbar KW - LCST KW - RAFT KW - block copolymers KW - self-assembly KW - thermoresponsive KW - LCST KW - RAFT Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59953 ER -