TY - THES A1 - Vijayakrishnan, Balakumar T1 - Solution and solid phase synthesis of N,N'-diacetyl chitotetraoses T1 - Synthese von N,N'-Diacetylchitotetraosen in Lösung und an Fester Phase N2 - The three major biopolymers, proteins, nucleic acids and glycoconjugates are mainly responsible for the information transfer, which is a fundamental process of life. The biological importance of proteins and nucleic acids are well explored and oligosaccharides in the form of glycoconjugates have gained importance recently. The β-(1→4) linked N-acetylglucosamine (GlcNAc) moiety is a frequently occurring structural unit in various naturally and biologically important oligosaccharides and related conjugates. Chitin which is the most abundant polymer of GlcNAc is widely distributed in nature whereas the related polysaccharide chitosan (polymer of GlcN and GlcNAc) occurs in certain fungi. Chitooligosaccharides of mixed acetylation patterns are of interest for the determination of the substrate specificities and mechanism of chitinases. In this report, we describe the chemical synthesis of three chitotetraoses namely GlcNAc-GlcN-GlcNAc-GlcN, GlcN-GlcNAc-GlcNAc-GlcN and GlcN-GlcN-GlcNAc-GlcNAc. Benzyloxycarbonyl (Z) and p-nitrobenzyloxycarbonyl (PNZ) were used for the amino functionality due to their ability to form the β-linkage during the glycosylation reactions through neighboring group participation and the trichloroacetimidate approach was utilized for the donor. Monomeric, dimeric acceptors and donors have been prepared by utilizing the Z and PNZ groups and coupling between the appropriate donor and acceptors in the presence of Lewis acid yielded the protected tetrasaccharides. Finally cleavage of PNZ followed by reacetylation and the deblocking of other protecting groups afforded the N,N’-diacetyl chitotetraoses in good yield. Successful syntheses for the protected diacetyl chitotetraoses by solid phase synthesis have also been described. N2 - Die drei wichtigsten Biopolymere sind Proteine, Nukleinsäuren und Glykokonjugate. Sie sind von fundamentaler Bedeutung für lebenswichtige Prozesse, wie z.B. den Informationstransfer. Die biologische Bedeutung von Proteinen und Nukleinsäuren ist eingehend erforscht, während Oligosaccharide in Form von Glykokonjugaten erst in neuerer Zeit an Bedeutung gewonnen haben. Die β-(1→4) verknüpfte N-Acetylglucosamin (GlcNAc) Einheit kommt häufig als in vielen natürlichen und biologisch wichtigen Oligosacchariden und ihren Konjugaten vor. Chitin, ein Polymer von GlcNAc, ist in der Natur weit verbreitet, während das verwandte Polysaccharid Chitosan (Polymer of GlcN und GlcNAc) in gewissen Pilzen auftritt. Chitooligosaccharide gemischter Acetylierungsmuster sind von Bedeutung für die Bestimmung von Substratwirkungen und für den Mechanismus von Chitinasen. In dieser Arbeit beschreiben wir die chemische Synthese von drei Chitotetraosen, nämlich GlcNAc-GlcN-GlcNAc-GlcN, GlcN-GlcNAc-GlcNAc-GlcN and GlcN-GlcN-GlcNAc-GlcNAc. Benzyloxycarbonyl (Z) und p-Nitrobenzyloxycarbonyl (PNZ) wurden aufgrund ihrer Fähigkeit, die β-Verknüpfung während der Glykosylierung durch die Nachbargruppenbeteiligung zu steuern, als Aminoschutzgruppen verwendet. Zur Aktivierung der Donoren wurde die Trichloracetamidat Methode angewendet. Monomere und dimere Akzeptoren und Donoren wurden unter Verwendung von Z und PNZ Gruppen hergestellt. Die Kupplung von geeigneten Donoren und Akzeptoren in Gegenwart einer Lewis Säure ergaben die Tetrasaccharide. Schließlich ergab die Entschützung von PNZ, gefolgt von der Reacetylierung der Aminogruppe und Abspalten der übrigen Schutzgruppen die N,N’-Diacetylchitotetraosen in guten Ausbeuten. Weiterhin wird die erfolgreiche Synthese der geschützten Diacetylchitotetraosen durch Festphasensynthese beschrieben. KW - Chitooligosaccharide KW - Chemische Synthese KW - Festphasensynthese KW - Glykosylierung KW - Chitooligosaccharides KW - Chemical Synthesis KW - Solution phase synthesis KW - Solid phase synthesis KW - Glycosylation Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-18830 ER - TY - THES A1 - Imran ul-haq, Muhammad T1 - Synthesis of fluorinated polymers in supercritical carbon dioxide (scCO₂) T1 - Synthese von Fluorpolymeren in überkritischem Kohlendioxid (scCO₂) N2 - For the first time stabilizer-free vinylidene fluoride (VDF) polymerizations were carried out in homogeneous phase with supercritical CO₂. Polymerizations were carried out at 140°C, 1500 bar and were initiated with di-tert-butyl peroxide (DTBP). In-line FT-NIR (Fourier Transform- Near Infrared) spectroscopy showed that complete monomer conversion may be obtained. Molecular weights were determined via size-exclusion chromatography (SEC) and polymer end group analysis by 1H-NMR spectroscopy. The number average molecular weights were below 104 g∙mol−1 and polydispersities ranged from 3.1 to 5.7 depending on DTBP and VDF concentration. To allow for isothermal reactions high CO₂ contents ranging from 61 to 83 wt.% were used. The high-temperature, high-pressure conditions were required for homogeneous phase polymerization. These conditions did not alter the amount of defects in VDF chaining. Scanning electron microscopy (SEM) indicated that regular stack-type particles were obtained upon expansion of the homogeneous polymerization mixture. To reduce the required amount of initiator, further VDF polymerizations using chain transfer agents (CTAs) to control molecular weights were carried out in homogeneous phase with supercritical carbon dioxide (scCO₂) at 120 °C and 1500 bar. Using perfluorinated hexyl iodide as CTA, polymers of low polydispersity ranging from 1.5 to 1.2 at the highest iodide concentration of 0.25 mol·L-1 were obtained. Electrospray ionization- mass spectroscopy (ESI-MS) indicates the absence of initiator derived end groups, supporting livingness of the system. The “livingness” is based on the labile C-I bond. However, due to the weakness of the C-I bond perfluorinated hexyl iodide also contributes to initiation. To allow for kinetic analyses of VDF polymerizations the CTA should not contribute to initiation. Therefore, additional CTAs were applied: BrCCl3, C6F13Br and C6F13H. It was found that C6F13H does not contribute to initiation. At 120°C and 1500 bar kp/kt0.5~ 0.64 (L·mol−1·s−1)0.5 was derived. The chain transfer constant (CT) at 120°C has been determined to be 8·10−1, 9·10−2 and 2·10−4 for C6F13I, C6F13Br and C6F13H, respectively. These CT values are associated with the bond energy of the C-X bond. Moreover, the labile C-I bond allows for functionalization of the polymer to triazole end groups applying click reactions. After substitution of the iodide end group by an azide group 1,3 dipolar cycloadditions with alkynes yield polymers with 1,2,3 triazole end groups. Using symmetrical alkynes the reactions may be carried out in the absence of any catalyst. This end-functionalized poly (vinylidene fluoride) (PVDF) has higher thermal stability as compared to the normal PVDF. PVDF samples from homogeneous phase polymerizations in supercritical CO₂ and subsequent expansion to ambient conditions were analyzed with respect to polymer end groups, crystallinity, type of polymorphs and morphology. Upon expansion the polymer was obtained as white powder. Scanning electron microscopy (SEM) showed that DTBP derived polymer end groups led to stack-type particles whereas sponge- or rose-type particles were obtained in case of CTA fragments as end groups. Fourier-Transform Infrared spectroscopy and wide angle X-ray diffraction indicated that the type of polymorph, α or β crystal phase was significantly affected by the type of end group. The content of β-phase material, which is responsible for piezoelectricity of PVDF, is the highest for polymer with DTBP-derived end groups. In addition, the crystallinity of the material, as determined via differential scanning calorimetry is affected by the end groups and polymer molecular weights. For example, crystallinity ranges from around 26 % for DTBP-derived end groups to a maximum of 62 % for end groups originating from perfluorinated hexyl iodide for polymers with Mn ~2200 g·mol–1. Expansion of the homogeneous polymerization mixture results in particle formation by a non-optimized RESS (Rapid Expansion from Supercritical Solution) process. Thus, it was tested how polymer end groups affect the particles size distribution obtained from RESS process under controlled conditions (T = 50°C and P = 200 bar). In all RESS experiments, small primary PVDF with diameters less than 100 nm without the use of liquid solvents, surfactants, or other additives were produced. A strong correlation between particle size and particle size distribution with polymer end groups and molecular weight of the original material was observed. The smallest particles were found for RESS of PVDF with Mn~ 4000 g·mol–1 and PFHI (C6F13I) - derived end groups. N2 - Erstmalig gelang es, stabilisatorfreie Vinylidenfluorid (VDF)-Polymerisationen in homogener Phase mit überkritischem CO₂ (scCO₂) bis zu vollständigem Monomerumsatz durchzuführen. Die Homogenität während der Polymerisation wurde durch in-line Fourier-Transform Nahinfrarot Spektroskopie beobachtet. Für Polymerisationen bei 140 °C und 1500 bar wurde Di-tert-butylperoxid (DTBP) als Initiator verwendet. Es wurden Polymere mit einem Zahlenmittel der Molmasse kleiner 104 g·mol–1 und Polydispersitäten zwischen 3.1 und 5.7. erhalten. Um isotherme Reaktionen zu ermöglichen, wurden CO₂-Gehalte zwischen 61 und 83 wt.% verwendet. Die für die homogene Reaktionsführung erforderlichen hohen Drücke und Temperaturen haben keinen Einfluss auf die Mikrostruktur des Polymers. Zur Verringerung der Initiatorkonzentration wurden weitere Polymerisationen unter Verwendung von Kettentransferreagenzien (CTA) bei 120 °C und 1500 bar in homogener Phase mit scCO₂ durchgeführt. Perfluoriertes Hexyliodid als CTA ermöglicht kontrollierte radikalische Polymerisationen, wobei Polymere mit geringer Polydispersität zwischen 1.5 und 1.2 erhalten wurden. Endgruppenanalyse mit Elektronenspray-Ionisations-Massen¬spektro¬metrie (ESI-MS) zeigte, dass keine Initiatorendgruppen im Polymer enthalten sind. Diese Beobachtung unterstützt den lebenden Charakter der Polymerisationen und basiert auf einer labilen C-I-Bindung im Polymer. Aufgrund der schwachen C-I-Bindung trägt das perfluorierte Hexyliodid (C6F13I) auch zur Initiierung bei. Polymerisationen in Gegenwart von BrCCl3, C6F13Br und C6F13H zeigten, dass nur C6F13H keinen Beitrag zur Initiierung leistet. Bei 120 °C und 1500 bar wurde ein kp/kt0.5 von ~ 0.64 (L·mol−1·s−1)0.5 bestimmt, wobei kp der Wachstums- und kt der Terminierungsgeschwindigkeitskoeffizient sind. Die Kettentransfer¬konstanten (CT) bei 120°C betragen 8·10−1, 9·10−2 und 2·10−4 für C6F13I, C6F13Br und C6F13H. Die Änderung der CT-Werte lässt sich mit der zunehmenden Bindungsenergie in der Reihe C-I, C-Br und C-H erklären. Die labile C-I-Bindung ermöglicht eine Funktionalisierung des Polymers durch Click-Reaktionen. Nach Substitution der Iodid-Endgruppe durch eine Azidgruppe erfolgte eine katalysatorfreie 1,3-dipolare Cyclaoaddition mit Alkinen zu Polymeren mit 1,2,3-Triazol-Endgruppen. Dieses endfunktionalisierte PVDF besitzt im Vergleich zu konventionellem PVDF eine höhere thermische Stabilität. Nach der Expansion der Polymerisationsmischung mit scCO₂ auf Umgebungsbedingungen lag das Polymer als weißes Pulver vor, das im Hinblick auf z.B. Polymerendgruppen, Kristallinität, Gestalt und Größe der Partikel untersucht wurde. Rasterelektronenmikroskopie zeigte, dass Polymere mit DTBP-Endgruppen zu stapelförmigen Partikeln führen, während bei CTA-Fragmenten als Endgruppen schwamm- oder rosenartige Partikel erhalten wurden. Ergebnisse der FT-IR Spektroskopie und Weitwinkelröntgenbeugung zeigten, dass der höchste Gehalt an β-phasigem Material, der für die Piezoelektrizität des PVDF verantwortlich ist, für PVDF mit Initiatorendgruppen erhalten wurde. DSC (Differential Scanning Calorimetry) Messungen ergaben zudem, dass der Kristallinitätsgrad durch Endgruppen und Polymermasse beeinflusst wird. Die Expansion der homogenen Polymermischung kann als nicht-optimierter RESS-Prozess (Rapid Expanison from Supercritical Solution,) angesehen werden. Aus RESS Experimenten unter kontrollierten Bedingungen wurden jeweils nanoskalige primäre PVDF-Partikel ohne Verwendung von Lösungsmitteln, Tensiden oder anderen Additiven erhalten. Es besteht ein enger Zusammenhang zwischen einerseits der Partikelgröße und der Partikelgrößenverteilung und andererseits der Polymerkonzentration in scCO₂ vor der Expansion, bestimmt durch Polymerendgruppen und Molmassen der eingesetzten Materialien. KW - Synthese KW - Fluorpolymere KW - überkritisches Kohlendioxid (scCO₂) KW - Synthesis KW - fluorinated polymers KW - supercritical carbon dioxide (scCO₂) Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-19868 ER - TY - THES A1 - Issaree, Arisara T1 - Synthesis of Hetero-chitooligosaccharides T1 - Synthese von Hetero-Chitooligosacchariden N2 - Chitooligosaccharides are composed of linear β-(1→4)-linked 2-acetamido-2-deoxy-β-D-glucopyranose (GlcNAc) and/or 2-amino-2-deoxy-β-D-glucopyranose (GlcN). They are of interest due to their remarkable biological properties including antibacterial, antitumor, antifungal and elicitor activities. They can be obtained from the aminoglucan chitosan by chemical or enzymatic degradation which obviously affords rather heterogenous mixtures. On the other hand, chemical synthesis provides pure compounds with defined sequences of GlcNAc and GlcN monomers. The synthesis of homo- and hetero-chitobioses and hetero-chitotetraoses is described in this thesis. Dimethylmaleoyl and phthaloyl groups were used for protection of the amines. The donor was activated as the trichloroacetimidate in order to form the β-linkages. Glycosylation in the presence of trimethylsilyl trifluoromethanesulfonate, followed by N- and O-deprotection furnished chitobioses and chitotetraoses in good yields. N2 - Chitooligosacchride bestehen aus linear β-(1→4)-verknüpften 2-acetamido-2-deoxy-β-D-glucopyranose (GlcNAc) and/or 2-amino-2-deoxy-β-D-glucopyranose (GlcN) Einheiten. Sie beanspruchen aufgrund ihrer bemerkenswerten biologischen Eigenschaften – u.a. antibakterielle, antitumor, antimykotische und Elicitor Aktivität - grosses Interesse. Sie sind durch chemischen oder enzymatischen Abbau von Chitosan zugänglich, wobei diese Methoden unausweichlich zu komplexen, sehr heterogenen Mischungen von Chiooligosacchariden führen. Chemische Synthesen von Chitooligosacchariden mit definierter Sequenz von GlcNAc und GlcN Einheiten sind daher von erheblichem Interesse. In der vorliegenden Arbeit werden Synthesen von partiell acetylierten Chitobiosen und –tetraosen beschrieben. Die Aminogruppen wurden als N-Dimethylmaleoyl- bzw. Phthaloylimide geschützt. Die Donoren wurden als Trichloacetimidate aktiviert, wobei aufgrund von Nachbargruppeneffekten ausschliesslich die β-Glycoside entstehen. Die Trimethylsilyltrifluoromethansulfonat-promovierte Glycosidierung geeigneter Akzeptoren lieferte schliesslich die Chitobiosen und die Chitotetraosen in guten Ausbeuten. KW - Kohlenhydrate KW - Chitooligosaccharide KW - Glycosylierung KW - Synthesemethoden KW - Trichloracetimidate KW - Carbohydrates KW - Chitooligosaccharides KW - Glycosylation KW - Synthetic methods KW - Trichloroacetimidates Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17069 ER - TY - THES A1 - Nazaran, Pantea T1 - Nucleation in emulsion polymerization : steps towards a non-micellar nucleation theory T1 - Teilchenbildung in der Emulsionspolymerisation N2 - For more than 70 years, understanding of the mechanism of particle nucleation in emulsion polymerization has been one of the most challenging issues in heterophase polymerization research. Within this work a comprehensive experimental study of particle nucleation in emulsion polymerization of styrene at 70 °C and variety of conditions has been performed. To follow the onset of nucleation, on-line conductivity measurements were applied. This technique is highly sensitive to the mobility of conducting species and hence, it can be employed to follow aggregation processes leading to particle formation. On the other hand, by recording the optical transmission (turbidity) of the reaction mixture particle growth was followed. Complementary to the on-line investigations, off-line characterizations of the particle morphology and the molecular weight have been performed. The aim was to achieve a better insight in the processes taking place after starting the reaction via particle nucleation until formation of colloidally stable latex particles. With this experimental protocol the initial period of styrene emulsion polymerization in the absence as well as in the presence of various surfactants (concentrations above and below the critical micellization concentration) and also in the presence of seed particles has been investigated. Ionic and non-ionic initiators (hydrophilic and hydrophobic types) have been applied to start the polymerizations. Following the above algorithm, experimental evidence has been obtained showing the possibility of performing surfactant-free emulsion polymerization of styrene with oil-soluble initiators. The duration of the pre-nucleation period (that is the time between starting the polymerization and nucleation) can be precisely adjusted with the initiator hydrophobicity, the equilibration time of styrene in water, and the surfactant concentration. Spontaneous emulsification of monomer in water, as soon as both phases are brought into contact, is a key factor to explain the experimental results. The equilibration time of monomer in water as well as the type and concentration of other materials in water (surfactants, seed particles, etc.) control the formation rate and the size of the emulsified droplets and thus, have a strong influence on the particle nucleation and the particle morphology. One of the main tasks was to investigate the effect of surfactant molecules and especially micelles on the nucleation mechanism. Experimental results revealed that in the presence of emulsifier micelles the conductivity pattern does not change essentially. This means that the presence of emulsifiers does not change the mechanism of particle formation qualitatively. However, surfactants assist in the nucleation process as they lower the activation free energy of particle formation. Contrary, seed particles influence particle nucleation, substantially. In the presence of seed particles above a critical volume fraction the formation of new particles can be suppressed. However, micelles and seed particles as absorbers exhibit a common behavior under conditions where monomer equilibration is not allowed. Results prove that the nucleation mechanism comprises the initiation of water soluble oligomers in the aqueous phase followed by their aggregation. The process is heterogeneous in nature due to the presence of monomer droplets. N2 - Polymere dominieren unsere Welt. Die natürlich vorkommenden Polymeren, wie Proteine, Polynukleotide, und Polysaccharide, sind nötig um das Leben zu erhalten. Ebenso wichtig sind die kommerziell erhältlichen Makromoleküle. Beides sind Bausteine, um Materialien zu konstruieren, welche man in beiden Welten finden kann- der natürlichen und der „Mensch-gemachten“ Welt. Unter den verschiedenen Polymerisationsmethoden hat sich die Emulsions-polymerisation zu einem weit verbreiteten Prozess entwickelt. Die Emulsionspolymerisation ist ein einzigartiger Polymerisationsprozess, bei dem ein Monomer oder ein Gemisch von Monomeren in einem wässrigen Medium polymerisiert wird. Dabei entsteht eine Dispersion von Polymeren, welche auch als Latex bezeichnet wird. Derzeit werden mehrere Millionen Tonnen von synthetischen Latices mit Hilfe der Emulsionspolymerisation hergestellt. Diese finden zum Beispiel Verwendung als synthetische Gummi, Latexschaum, Latexfarben, Papierbeschichtungen und Klebstoffen. Außerdem findet man sie auch bei Spezialanwendungen, wie Diagnosetests, Pharmakotherapien und chromatographischen Trennmethoden. Trotz der Vielzahl von industriellen Anwendungen, sollten all jenen, die sich mit Emulsionspolymerisation beschäftigen, den wissenschaftlichen und technologischen Herausforderungen, die sich stellen, bewusst sein. Die wichtigsten Fragen beim Umgang mit der Emulsionspolymerisation beinhalten das Verständnis des Prozesses der Partikelbildung und des Partikelwachstums. Die vorliegende Dissertation beschäftigt sich mit der Frage der Keimbildungs-etappe in Emulsionspolymerisationen. Die Untersuchungen wurden mit Hilfe eines on-line Leitfähigkeitsmessverfahren sowie einigen off-line analytischen Experimenten durchgeführt. Basierend auf den klaren experimentellen Daten, wurde ein besserer Einblick in die tatsächlichen Zustände des Polymerisationssystems, von der Zeit der neu geboren Kerne bis zu endgültig stabilisierten Teilchen, gewonnen. KW - Emulsionspolymerisation KW - Teilchenbildung KW - Nukleierung KW - Mizellen KW - emulsion polymerization KW - nucleation KW - particle formation KW - surfactant KW - micelles Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17521 ER - TY - THES A1 - Klaumünzer, Bastian T1 - Stickstoffinversion in Azacyclen : Modellsimulationen für einen molekularen Schalter T1 - Nitrogen inversion in azacycles : model simulations for a molecular switch N2 - In dieser Arbeit wird durch Modellrechnungen gezeigt, wie die Stickstoffinversion in Azacyclen als molekularer Schalter genutzt werden könnte. Hierzu werden ein Fluorazetidin- und ein Fluorazacyclopentanderviat quantenchemisch untersucht. Das letztere Molekül wird auch quantendynamisch untersucht. Jedes der beiden Moleküle besitzt zwei stabile Konformationen. Es wird gezeigt, dass das Azabicyclopentanderivat von der einen Konformation mittels zweier linear polarisierter IR-Laserpulse durch sogenanntes “ladder climbing” in die andere überführt werden kann. N2 - In this work it is shown by model simulation, how the nitrogon inversion in azacycles could be used as a molecular switch. For this a azetidine derivative and a fluoroazabicyclopentane derivative have been investigated quantumchemically. Both of the molecules have two stable conformers. The latter molecule is also investigated quantumdynamically. Its is shown that the azabicyclopentanederivative can be switched from one conformer to the other by using two linear polarised IR laser pulses via ladder climbing. KW - Stickstoffinversion KW - Azacyclen KW - Laserkontrolle KW - molekularer Schalter KW - nitrogen inversion KW - azacycles KW - laser control KW - molecular switch Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17482 ER - TY - GEN A1 - Oliveira Jr, E. N. A1 - Gueddari, Nour E. El A1 - Moerschbacher, Bruno M. A1 - Peter, Martin A1 - Franco, Telma T1 - Growth of phytopathogenic fungi in the presence of partially acetylated chitooligosaccharides N2 - Four phytopathogenic fungi were cultivated up to six days in media containing chitooligosaccharide mixtures differing in average DP and FA. The three different mixtures were named Q3 (which contained oligosaccharides ofDP2–DP10, withDP2–DP7 asmain components), Q2 (which contained oligosaccharides of DP2–DP12, with DP2–DP10 as main components) and Q1 (which derived from Q2 and contained oligomers of DP5–DP8 with hexamer and a heptamer as the main components). The novel aspect of this work is the description of the effect of mixtures of oligosaccharides with different and known composition on fungal growth rates. The growth rate of Alternaria alternata and Rhizopus stolonifer was initially inhibited by Q3 and Q2 at higher concentrations. Q1 had a growth stimulating effect on these two fungi. Growth of Botrytis cinerea was inhibited by Q3 and Q2, while Q1 had no effect on the growth of this fungus. Growth of Penicillium expansum was only slightly inhibited by higher concentrations of sample Q3, while Q2 and Q1 had no effect. The inhibition of growth rates or their resistance toward chitooligosaccharides correlated with the absence or presence of chitinolytic enzymes in the culture media, respectively. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 105 KW - Chitosan KW - Chitinase KW - Fungi KW - Oligosaccharides KW - Phytopathogens Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-42646 ER - TY - GEN A1 - Bringmann, Gerhard A1 - Mutanyatta-Comar, Joan A1 - Maksimenka, Katja A1 - Wanjohi, John M. A1 - Heydenreich, Matthias A1 - Brun, Reto A1 - Müller, Werner E. G. A1 - Peter, Martin A1 - Midiwo, Jacob O. A1 - Yenesew, Abiy T1 - Joziknipholones A and B : the First Dimeric Phenylanthraquinones, from the Roots of Bulbine frutescens N2 - From the roots of the African plant Bulbine frutescens (Asphodelaceae), two unprecedented novel dimeric phenylanthraquinones, named joziknipholones A and B, possessing axial and centrochirality, were isolated, together with six known compounds. Structural elucidation of the new metabolites was achieved by spectroscopic and chiroptical methods, by reductive cleavage of the central bond between the monomeric phenylanthraquinone and -anthrone portions with sodium dithionite, and by quantum chemical CD calculations. Based on the recently revised absolute axial configuration of the parent phenylanthraquinones, knipholone and knipholone anthrone, the new dimers were attributed to possess the P-configuration (i.e., with the acetyl portions below the anthraquinone plane) at both axes in the case of joziknipholone A, whereas in joziknipholone B, the knipholone part was found to be M-configured. Joziknipholones A and B are active against the chloroquine resistant strain K1 of the malaria pathogen, Plasmodium falciparum, and show moderate activity against murine leukemic lymphoma L5178y cells. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 104 KW - antimalarial activity KW - chirality KW - joziknipholones KW - natural products KW - structure elucidation Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-42638 ER - TY - THES A1 - Skrabania, Katja T1 - The multifarious self-assembly of triblock copolymers : from multi-responsive polymers and multi-compartment micelles T1 - Die Vielfalt der Selbstorganisation von Triblockcopolymeren : von mehrfach schaltbaren Polymeren und Multi-Kompartiment Mizellen N2 - New ABC triblock copolymers were synthesized by controlled free-radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT). Compared to amphiphilic diblock copolymers, the prepared materials formed more complex self-assembled structures in water due to three different functional units. Two strategies were followed: The first approach relied on double-thermoresponsive triblock copolymers exhibiting Lower Critical Solution Temperature (LCST) behavior in water. While the first phase transition triggers the self-assembly of triblock copolymers upon heating, the second one allows to modify the self-assembled state. The stepwise self-assembly was followed by turbidimetry, dynamic light scattering (DLS) and 1H NMR spectroscopy as these methods reflect the behavior on the macroscopic, mesoscopic and molecular scale. Although the first phase transition could be easily monitored due to the onset of self-assembly, it was difficult to identify the second phase transition unambiguously as the changes are either marginal or coincide with the slow response of the self-assembled system to relatively fast changes of temperature. The second approach towards advanced polymeric micelles exploited the thermodynamic incompatibility of “triphilic” block copolymers – namely polymers bearing a hydrophilic, a lipophilic and a fluorophilic block – as the driving force for self-assembly in water. The self-assembly of these polymers in water produced polymeric micelles comprising a hydrophilic corona and a microphase-separated micellar core with lipophilic and fluorophilic domains – so called multi-compartment micelles. The association of triblock copolymers in water was studied by 1H NMR spectroscopy, DLS and cryogenic transmission electron microscopy (cryo-TEM). Direct imaging of the polymeric micelles in solution by cryo-TEM revealed different morphologies depending on the block sequence and the preparation conditions. While polymers with the sequence hydrophilic-lipophilic-fluorophilic built core-shell-corona micelles with the core being the fluorinated compartment, block copolymers with the hydrophilic block in the middle formed spherical micelles where single or multiple fluorinated domains “float” as disks on the surface of the lipophilic core. Increasing the temperature during micelle preparation or annealing of the aqueous solutions after preparation at higher temperatures induced occasionally a change of the micelle morphology or the particle size distribution. By RAFT polymerization not only the desired polymeric architectures could be realized, but the technique provided in addition a precious tool for molar mass characterization. The thiocarbonylthio moieties, which are present at the chain ends of polymers prepared by RAFT, absorb light in the UV and visible range and were employed for end-group analysis by UV-vis spectroscopy. A variety of dithiobenzoate and trithiocarbonate RAFT agents with differently substituted initiating R groups were synthesized. The investigation of their absorption characteristics showed that the intensity of the absorptions depends sensitively on the substitution pattern next to the thiocarbonylthio moiety and on the solvent polarity. According to these results, the conditions for a reliable and convenient end-group analysis by UV-vis spectroscopy were optimized. As end-group analysis by UV-vis spectroscopy is insensitive to the potential association of polymers in solution, it was advantageously exploited for the molar mass characterization of the prepared amphiphilic block copolymers. N2 - Die Arbeit widmet sich der Synthese von neuen amphiphilen ternären "ABC" Block-Copolymeren und der Untersuchung ihrer Selbstorganisation zu mizellaren Überstrukturen in wässriger Lösung. Die Block-Copolymere wurden durch kontrollierte radikalische Polymerisation mittels des sogenannten „RAFT“ Prozesses (radical addition fragmentation chain transfer) hergestellt. Neben der Realisierung der gewünschten Polymerarchitekturen erlaubte es die Methode, die Molmassen der Polymere durch Endgruppenanalyse zu bestimmen. Die Kettenenden der Polymere tragen infolge des Polymerisationsmechanismus’ definierte Funktionalitäten, welche UV- und sichtbares Licht absorbieren und somit durch UV-vis-Spektroskopie quantifizierbar sind. Das Absorptionsverhalten der Endgruppen wurde untersucht und die UV-vis-Endgruppenanalyse optimiert. Es zeigte sich, dass die Vorteile der Methode ihre generelle Anwendbarkeit und ihre Unempfindlichkeit gegenüber der Assoziation von Polymeren in Lösung sind. Aufgrund ihrer drei unterschiedlichen Blöcke bilden die synthetisierten ABC Triblockcopolymere komplexere selbstorganisierte Strukturen als die bisher üblichen Diblockcopolymere. Die Triebkraft für ihre Selbstorganisation in wässriger Lösung ist im wesentlichen der hydrophobe Effekt. Es wurden zwei unterschiedliche Ansätze verfolgt: Zum einen wurden doppelt-schaltbare Triblockcopolymere hergestellt, von denen ein Block permanent wasserlöslich ist, während die anderen Blöcke jeweils eine untere Entmischungstemperatur in wässriger Lösung aufweisen. Diese Blöcke „schalten“ beim Erwärmen von hydrophil auf hydrophob. Oberhalb des ersten Phasenübergangs - bei der niedrigeren Entmischungstemperatur - assoziieren die Makromoleküle und bilden Polymermizellen im Nanometerbereich. Beim weiteren Erwärmen „schaltet“ auch der zweite Block und modifiziert den selbstorganisierten Zustand, während der permanent wasserlösliche Block für die Stabilisierung der Aggregate sorgt. Die Assoziation der Block-Copolymere ist nach Abkühlen der wässrigen Lösung vollständig reversibel. Die stufenweise Selbstorganisation wurde mit Hilfe von Turbidimetrie, Dynamischer Lichtstreuung (DLS) und 1H-NMR-Spektroskopie untersucht, da diese Methoden das Verhalten auf der makroskopischen, mesoskopischen und molekularen Skala widerspiegeln. Obwohl der einsetzende Selbstorganisationsprozess problemlos zu detektieren war, konnten die Veränderungen infolge des zweiten Phasenübergang nicht immer eindeutig identifiziert werden, da sie zum Teil mit der langsamen Reaktion des Systems auf relativ schnelle Temperaturänderungen zusammenfielen. Außerdem hängt die Aggregatbildung nicht nur sensibel von der detaillierten Polymerarchitektur ab, sondern unterliegt auch teilweise einer kinetischen Kontrolle. Der zweite Ansatz zu komplexeren Polymermizellen basierte auf der Inkompatibilität „triphiler“ Blockcopolymere als Triebkraft für die Selbstorganisation. Das heißt, die Block-Copolymere bestehen aus einem hydrophilen, einen lipophilen und einen fluorophilen (Fluorkohlenwasserstoff-liebenden) Teil, die jeweils miteinander unverträglich sind. Die Polymere assoziierten in Wasser zu Polymermizellen mit einer hydrophilen Korona und einem unterstrukturierten Mizellkern mit separaten Kohlenwasserstoff- und Fluorkohlenwasserstoff-Domänen – sogenannten Multi-Kompartiment-Mizellen. Die Assoziation der Triblock-Copolymere wurde mit 1H-NMR-Spektroskopie, DLS und cryogener Transmissionselektronenmikroskopie (cryo-TEM) untersucht. Die unmittelbare Abbildung der Polymermizellen in Lösung mittels cryo-TEM enthüllte unterschiedliche Morphologien in Abhängigkeit von der Blocksequenz und den Präparationsbedingungen. Während Polymere mit der Blocksequenz hydrophil-lipophil-fluorophil Kern-Schale-Korona-Mizellen mit der Fluor-Domäne als Kern bildeten, wurde eine neue, unerwartete Mizellmorphologie für die Polymere mit dem hydrophilen Block in der Mitte gefunden: Einzelne oder mehrere Fluordomänen “schwimmen” als Scheiben auf dem lipophilen Kern. Die beobachteten Morphologien sind weitgehend stabil, unterliegen aber ebenfalls - zumindest teilweise - einer kinetischen Kontrolle. So führten erhöhte Temperaturen während der Mizellpräparation gelegentlich zu einer Veränderung der Mizellmorphologie oder Partikelgröße. KW - ABC triblock copolymer KW - reversible addition fragmentation chain transfer (RAFT) KW - thermoresponsive polymer KW - multicompartment micelle Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-30764 ER - TY - THES A1 - Hernandez Garcia, Hugo Fernando T1 - Multiscale simulation of heterophase polymerization : application to the synthesis of multicomponent colloidal polymer particles T1 - Multidimensionale Simulation von Heterophasenpolymerisationen : Anwendungen zur Synthese von kolloidalen Kompositpolymerteilchen N2 - Heterophase polymerization is a technique widely used for the synthesis of high performance polymeric materials with applications including paints, inks, adhesives, synthetic rubber, biomedical applications and many others. Due to the heterogeneous nature of the process, many different relevant length and time scales can be identified. Each of these scales has a direct influence on the kinetics of polymerization and on the physicochemical and performance properties of the final product. Therefore, from the point of view of product and process design and optimization, the understanding of each of these relevant scales and their integration into one single model is a very promising route for reducing the time-to-market in the development of new products, for increasing the productivity and profitability of existing processes, and for designing products with improved performance or cost/performance ratio. The process considered is the synthesis of structured or composite polymer particles by multi-stage seeded emulsion polymerization. This type of process is used for the preparation of high performance materials where a synergistic behavior of two or more different types of polymers is obtained. Some examples include the synthesis of core-shell or multilayered particles for improved impact strength materials and for high resistance coatings and adhesives. The kinetics of the most relevant events taking place in an emulsion polymerization process has been investigated using suitable numerical simulation techniques at their corresponding time and length scales. These methods, which include Molecular Dynamics (MD) simulation, Brownian Dynamics (BD) simulation and kinetic Monte Carlo (kMC) simulation, have been found to be very powerful and highly useful for gaining a deeper insight and achieving a better understanding and a more accurate description of all phenomena involved in emulsion polymerization processes, and can be potentially extended to investigate any type of heterogeneous process. The novel approach of using these kinetic-based numerical simulation methods can be regarded as a complement to the traditional thermodynamic-based macroscopic description of emulsion polymerization. The particular events investigated include molecular diffusion, diffusion-controlled polymerization reactions, particle formation, absorption/desorption of radicals and monomer, and the colloidal aggregation of polymer particles. Using BD simulation it was possible to precisely determine the kinetics of absorption/desorption of molecular species by polymer particles, and to simulate the colloidal aggregation of polymer particles. For diluted systems, a very good agreement between BD simulation and the classical theory developed by Smoluchowski was obtained. However, for concentrated systems, significant deviations from the ideal behavior predicted by Smoluchowski were evidenced. BD simulation was found to be a very valuable tool for the investigation of emulsion polymerization processes especially when the spatial and geometrical complexity of the system cannot be neglected, as is the case of concentrated dispersions, non-spherical particles, structured polymer particles, particles with non-uniform monomer concentration, and so on. In addition, BD simulation was used to describe non-equilibrium monomer swelling kinetics, which is not possible using the traditional thermodynamic approach because it is only valid for systems at equilibrium. The description of diffusion-controlled polymerization reactions was successfully achieved using a new stochastic algorithm for the kMC simulation of imperfectly mixed systems (SSA-IM). In contrast to the traditional stochastic simulation algorithm (SSA) and the deterministic rate of reaction equations, instead of assuming perfect mixing in the whole reactor, the new SSA-IM determines the volume perfectly mixed between two consecutive reactions as a function of the diffusion coefficient of the reacting species. Using this approach it was possible to describe, using a single set of kinetic parameters, typical mass transfer limitations effects during a free radical batch polymerization such as the cage effect, the gel effect and the glass effect. Using multiscale integration it was possible to investigate the formation of secondary particles during the seeded emulsion polymerization of vinyl acetate over a polystyrene seed. Three different cases of radical generation were considered: generation of radicals by thermal decomposition of water-soluble initiating compounds, generation of radicals by a redox reaction at the surface of the particles, and generation of radicals by thermal decomposition of surface-active initiators "inisurfs" attached to the surface of the particles. The simulation results demonstrated the satisfactory reduction in secondary particles formation achieved when the locus of radical generation is controlled close to the particles surface. N2 - Eine der industriell am meisten verwendeten Methoden zur Herstellung von Hochleistungspolymeren ist die Heterophasenpolymerisation. Industriell von besonderer Bedeutung ist die sogenannte Saatemulsionspolymerisation bei der kleine Saatteilchen durch die sequentielle Zugabe von weiteren Monomeren gezielt modifiziert werden, um Kompositpolymerteilchen mit den gewünschten mechanischen und chemischen Gebrauchseigenschaften herzustellen. Ein häufig auftretendes Problem während dieser Art der Heterophasenpolymerisation ist die Bildung von neuen, kleinen Teilchen im Polymerisationsverlauf. Diese sogenannte sekundäre Teilchenbildung muss vermieden werden, da sie die Herstellung der gewünschten Teilchen mit den angestrebten Eigenschaften verhindert. Ein spezieller Fall der Saatemulsionspolymerisation ist die Kombination von Vinylacetat als Monomer, das auf Saatteilchen aus Polystyrol polymerisieren soll. Die Unterdrückung der Teilchenneubildung ist in diesem Beispiel besonders schwierig, da Vinylacetat eine sehr hohe Wasserlöslichkeit besitzt. In der vorliegenden Arbeit wurden zur Lösung der Aufgabenstellung verschiedene numerische Simulierungsalgorithmen verwendet, die entsprechend den charakteristischen Längen- und Zeitskalen der im Verlauf der Polymerisation ablaufenden Prozesse ausgewählt wurden, um die passenden Bedingungen für die Unterdrückung der sekundären Teilchenbildung zu finden. Die verwendeten numerischen Methoden umfassen Molekulare Dynamik Simulationen, die benutzt werden, um molekulare Bewegungen zu berechnen; Brownsche Dynamik Simulationen, die benutzt werden, um die zufälligen Bewegungen der kolloidalen Teilchen und der molekularen Spezies zu beschreiben, und kinetische Monte Carlo Simulationen, die das zufällige Auftreten von individuellen physikalischen oder chemischen Ereignissen modellieren. Durch die Kombination dieser Methoden ist es möglich, alle für die Beschreibung der Polymerisation relevanten Phänomene zu berücksichtigen. Damit können nicht nur die Reaktionsgeschwindigkeit und die Produktivität des Prozesses simuliert werden sondern auch Aussagen bezüglich der physikalischen und chemischen Eigenschaften des Produktes sowie den Applikationseigenschaften getroffen werden. In dieser Arbeit wurden zum ersten Mal Modelle für die unterschiedlichen Längen- und Zeitskalen bei Heterophasenpolymerisationen entwickelt und erfolgreich zur Modellierung des Prozesses angewendet. Die Ergebnisse führten zu bedeutenden Verbesserungen der Theorie von Emulsionspolymerisationen insbesondere für die Beschreibung des Massenaustausches zwischen den Phasen (bspw. Radikaleintritt in und Radikalaustritt aus die Polymerteilchen), der Bildung von neuen Teilchen, und der Polymerisationskinetik unter den heterogenen Reaktionsbedingungen mit uneinheitlicher Durchmischung. KW - Heterophase Polymerization KW - Emulsion Polymerization KW - Simulation KW - Kinetics KW - Brownian motion Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-25036 ER - TY - THES A1 - Bahrke, Sven T1 - Mass spectrometric analysis of chitooligosaccharides and their interaction with proteins T1 - Massenspektrometrische Analyse von Chitooligosacchariden und ihre Wechselwirkungen mit Proteinen N2 - Chitooligosaccharides are composed of glycosamin and N-acetylglycisamin residues. Gel permeations chromatography is employed for the separation of oligomers, cation exchange chromatography is used for the separation of homologes and isomers. Trideuterioacetylation of the chitooligosaccharides followed by MALDI-TOF mass spectrometry allowes for the quantitation of mixtures of homologes. vMALDI LTQ multiple-stage MS is employed for quantitative sequencing of complex mixtures of heterochitooligosaccharides. Pure homologes and isomers are applied to biological assays. Chitooligosaccahrides form high-affinity non-covalent complexes with HC gp-39 (human cartilage glycoprotein of 39 kDa). The affinity of the chitooligosaccharides depends on DP, FA and the sequence of glycosamin and N-acetylglycosamin moieties. (+)nanoESI Q TOF MS/MS is used for identification of a high-affinity binding chitooligosaccharide of a non-covalent chitinase B - chitooligosaccharide complex. DADAA is identified as the heterochitoisomer binding with highest affinity and biostability to HC gp-39. Fluorescence based enzyme assays confirm the results. N2 - Chitooligosaccharide sind aus Glycosamin und N-Acetylglycosamun aufgebaut. Gelpermeationschromatographie wird für die Trennung von Oligomeren verwendet, die Kationenaustauschchromatographie wird zur Trennung von homologen- und Isomerengemischen angewendet. Trideuterioacetylierung der Chitooligosaccharide gefolgt von einer Analyse mittels MALDI-TOF MS erlaubt die quantitative Analyse von Homologengemischen. vMALDI LTQ multiple-stage MS wird angewendet zur Sequenzanalyse und Quantifizierung komplexer Gemische von Heterochitooligosacchariden. Reine Homologe und Isomere werden für biologische Assays verwendet. Dabei zeigt sich, dass Chitooligosaccharide mit HC gp-39 hochaffine Komplexe bilden. Die Affinität der Chitooligosaccharide hängt vom DP, FA und der Sequenz der Chitooligosaccharide ab. (+)nanoESI Q TOF MS/MS wird erfolgreich angewendet zur Identifizierung eines Chitooligosaccharides, das mit hoher Affinität an Chitinase B (Serratia marcescens) bindet. DADAA wurde als die Sequenz des Isomers identifiziert, das mit höchster Affinität und Biostabilität an aktive Chitinase B bindet. Fluoreszenz basierte Enzymassays konnten dieses Ergebnis bestätigen. KW - Chitooligosaccharide KW - HPLC KW - Massenspektrometrie KW - Chitolektine KW - Chitinase KW - Chitooligosaccharides KW - HPLC KW - Mass Spectrometry KW - Chitolectins KW - Chitinase Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-20179 ER -