TY - JOUR A1 - Mullan, Thomas A1 - Maschio, Lorenzo A1 - Saalfrank, Peter A1 - Usvyat, Denis T1 - Reaction barriers on non-conducting surfaces beyond periodic local MP2 BT - Diffusion of hydrogen on alpha-Al2O3 (0001) as a test case JF - The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr N2 - The quest for "chemical accuracy" is becoming more and more demanded in the field of structure and kinetics of molecules at solid surfaces. In this paper, as an example, we focus on the barrier for hydrogen diffusion on a alpha-Al2O3 (0001) surface, aiming for a couple cluster singles, doubles, and perturbative triples [CCSD(T)]-level benchmark. We employ the density functional theory (DFT) optimized minimum and transition state structures reported by Heiden, Usvyat, and Saalfrank [J. Phys. Chem. C 123, 6675 (2019)]. The barrier is first evaluated at the periodic Hartree-Fock and local Moller-Plesset second-order perturbation (MP2) level of theory. The possible sources of errors are then analyzed, which includes basis set incompleteness error, frozen core, density fitting, local approximation errors, as well as the MP2 method error. Using periodic and embedded fragment models, corrections to these errors are evaluated. In particular, two corrections are found to be non-negligible (both from the chemical accuracy perspective and at the scale of the barrier value of 0.72 eV): the correction to the frozen core-approximation of 0.06 eV and the CCSD(T) correction of 0.07 eV. Our correlated wave function results are compared to barriers obtained from DFT. Among the tested DFT functionals, the best performing for this barrier is B3LYP-D3. Y1 - 2022 U6 - https://doi.org/10.1063/5.0082805 SN - 0021-9606 SN - 1089-7690 VL - 156 IS - 7 PB - AIP Publishing CY - Melville ER - TY - JOUR A1 - Yue, Yanhua A1 - Melani, Giacomo A1 - Kirsch, Harald A1 - Paarmann, Alexander A1 - Saalfrank, Peter A1 - Campen, Richard Kramer A1 - Tong, Yujin T1 - Structure and Reactivity of a-Al2O3(0001) Surfaces: How Do Al-I and Gibbsite-like Terminations Interconvert? JF - The journal of physical chemistry / publ. weekly by the American Chemical Society. C, Energy, materials, and catalysis N2 - The alpha-Al2O3(0001) surface has been extensively studied because of its significance in both fundamental research and application. Prior work suggests that in ultra-high-vacuum (UHV), in the absence of water, the so-called Al-I termination is thermodynamically favored, while in ambient, in contact with liquid water, a Gibbsite-like layer is created. While the view of the alpha- Al2O3(0001)/H2O(l) interface appears relatively clear in theory, experimental characterization of this system has resulted in estimates of surface acidity, i.e., isoelectric points, that differ by 4 pH units and surface structure that in some reports has non-hydrogen-bonded surface aluminol (Al-OH) groups and in others does not. In this study, we employed vibrational sum frequency spectroscopy (VSFS) and density functional theory (DFT) simulation to study the surface phonon modes of the differently terminated alpha-Al2O3(0001) surfaces in both UHV and ambient. We find that, on either water dosing of the Al-I in UHV or heat-induced dehydroxylation of the Gibbsite-like in ambient, the surfaces do not interconvert. This observation offers a new explanation for disagreements in prior work on the alpha-Al2O3(0001)/liquid water interface -different preparation methods may create surfaces that do not interconvert-and shows that the surface phonon spectral response offers a novel probe of interfacial hydrogen bonding structure. Y1 - 2022 U6 - https://doi.org/10.1021/acs.jpcc.2c03743 SN - 1932-7447 SN - 1932-7455 VL - 126 IS - 31 SP - 13467 EP - 13476 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Tarazona Lizcano, Natalia Andrea A1 - Machatschek, Rainhard Gabriel A1 - Balcucho, Jennifer A1 - Castro-Mayorga, Jinneth Lorena A1 - Saldarriaga, Juan Francisco A1 - Lendlein, Andreas T1 - Opportunities and challenges for integrating the development of sustainable polymer materials within an international circular (bio)economy concept JF - MRS energy & sustainability : science & technology & socio-economics & policy N2 - The production and consumption of commodity polymers have been an indispensable part of the development of our modern society. Owing to their adjustable properties and variety of functions, polymer-based materials will continue playing important roles in achieving the Sustainable Development Goals (SDG)s, defined by the United Nations, in key areas such as healthcare, transport, food preservation, construction, electronics, and water management. Considering the serious environmental crisis, generated by increasing consumption of plastics, leading-edge polymers need to incorporate two types of functions: Those that directly arise from the demands of the application (e.g. selective gas and liquid permeation, actuation or charge transport) and those that enable minimization of environmental harm, e.g., through prolongation of the functional lifetime, minimization of material usage, or through predictable disintegration into non-toxic fragments. Here, we give examples of how the incorporation of a thoughtful combination of properties/functions can enhance the sustainability of plastics ranging from material design to waste management. We focus on tools to measure and reduce the negative impacts of plastics on the environment throughout their life cycle, the use of renewable sources for their synthesis, the design of biodegradable and/or recyclable materials, and the use of biotechnological strategies for enzymatic recycling of plastics that fits into a circular bioeconomy. Finally, we discuss future applications for sustainable plastics with the aim to achieve the SDGs through international cooperation.
Leading-edge polymer-based materials for consumer and advanced applications are necessary to achieve sustainable development at a global scale. It is essential to understand how sustainability can be incorporated in these materials via green chemistry, the integration of bio-based building blocks from biorefineries, circular bioeconomy strategies, and combined smart and functional capabilities. KW - biomaterial KW - degradable KW - functional KW - life cycle assessment KW - renewable KW - sustainability Y1 - 2022 U6 - https://doi.org/10.1557/s43581-021-00015-7 SN - 2329-2229 SN - 2329-2237 VL - 9 IS - 1 SP - 28 EP - 34 PB - Springer Nature CY - London ER - TY - JOUR A1 - Halbrügge, Lena A1 - Banerji, Amitabh A1 - Meerholz, Klaus T1 - Hallo Zukunft! BT - gedruckte Elektronik als Hands-on-Experiment für die Lehre in den Naturwissenschaften an (Hoch-)Schulen JF - Chemie konkret : CHEMKON ; Forum für Unterricht und Didaktik N2 - Gedruckte Elektronik ist nicht nur ein aufstrebendes Forschungsfeld, sie wird in naher Zukunft auch eine wesentliche Rolle in unserem Alltag spielen. Gedruckte, elektronische Bauteile können sehr dünn und flexibel sein und somit vielfältig eingesetzt werden. Für die Implementation in der (Hoch-)Schule haben die Autoren eine flexible, lichtemittierende Folie entwickelt, die mit einfachen Materialien und Methoden manuell gedruckt werden kann. N2 - Printed electronics is an emerging research field and is going to play a vital role in our everyday-life in the near future. Printed electronic devices can be very thin and flexible, which makes them feasible for various applications. For the implementation in High Schools and Universities the authors developed a flexible, light emitting foil, which can be printed manually using simple materials and methods. T2 - Hello future! Printed electronics as a hands-on-experiment for teaching science in high schools and universities KW - curriculum innovation KW - experiment KW - electroluminescence KW - semiconductor KW - curriculare Innovation KW - Experiment KW - Elektrolumineszenz KW - Halbleiter Y1 - 2022 U6 - https://doi.org/10.1002/ckon.202200030 SN - 0944-5846 SN - 1521-3730 VL - 29 IS - 51 SP - 355 EP - 361 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Stefancu, Andrei A1 - Nan, Lin A1 - Zhu, Li A1 - Chis, Vasile A1 - Bald, Ilko A1 - Liu, Min A1 - Leopold, Nicolae A1 - Maier, Stefan A. A1 - Cortes, Emiliano T1 - Controlling plasmonic chemistry pathways through specific ion effects JF - Advanced optical materials N2 - Plasmon-driven dehalogenation of brominated purines has been recently explored as a model system to understand fundamental aspects of plasmon-assisted chemical reactions. Here, it is shown that divalent Ca2+ ions strongly bridge the adsorption of bromoadenine (Br-Ade) to Ag surfaces. Such ion-mediated binding increases the molecule's adsorption energy leading to an overlap of the metal energy states and the molecular states, enabling the chemical interface damping (CID) of the plasmon modes of the Ag nanostructures (i.e., direct electron transfer from the metal to Br-Ade). Consequently, the conversion of Br-Ade to adenine almost doubles following the addition of Ca2+. These experimental results, supported by theoretical calculations of the local density of states of the Ag/Br-Ade complex, indicate a change of the charge transfer pathway driving the dehalogenation reaction, from Landau damping (in the lack of Ca2+ ions) to CID (after the addition of Ca2+). The results show that the surface dynamics of chemical species (including water molecules) play an essential role in charge transfer at plasmonic interfaces and cannot be ignored. It is envisioned that these results will help in designing more efficient nanoreactors, harnessing the full potential of plasmon-assisted chemistry. KW - chemical interface damping KW - Hofmeister effect KW - hydration layer KW - plasmonic chemistry KW - specific ion effects KW - surface-enhanced Raman scattering Y1 - 2022 U6 - https://doi.org/10.1002/adom.202200397 SN - 2195-1071 VL - 10 IS - 14 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Schürmann, Robin A1 - Titov, Evgenii A1 - Ebel, Kenny A1 - Kogikoski Junior, Sergio A1 - Mostafa, Amr A1 - Saalfrank, Peter A1 - Milosavljević, Aleksandar R. A1 - Bald, Ilko T1 - The electronic structure of the metal-organic interface of isolated ligand coated gold nanoparticles JF - Nanoscale Advances N2 - Light induced electron transfer reactions of molecules on the surface of noble metal nanoparticles (NPs) depend significantly on the electronic properties of the metal-organic interface. Hybridized metal-molecule states and dipoles at the interface alter the work function and facilitate or hinder electron transfer between the NPs and ligand. X-ray photoelectron spectroscopy (XPS) measurements of isolated AuNPs coated with thiolated ligands in a vacuum have been performed as a function of photon energy, and the depth dependent information of the metal-organic interface has been obtained. The role of surface dipoles in the XPS measurements of isolated ligand coated NPs is discussed and the binding energy of the Au 4f states is shifted by around 0.8 eV in the outer atomic layers of 4-nitrothiophenol coated AuNPs, facilitating electron transport towards the molecules. Moreover, the influence of the interface dipole depends significantly on the adsorbed ligand molecules. The present study paves the way towards the engineering of the electronic properties of the nanoparticle surface, which is of utmost importance for the application of plasmonic nanoparticles in the fields of heterogeneous catalysis and solar energy conversion. Y1 - 2022 U6 - https://doi.org/10.1039/d1na00737h SN - 2516-0230 VL - 4 IS - 6 SP - 1599 EP - 1607 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Michaelis, Vivien A1 - Aengenheister, Leonie A1 - Tuchtenhagen, Max A1 - Rinklebe, Jörg A1 - Ebert, Franziska A1 - Schwerdtle, Tanja A1 - Buerki-Thurnherr, Tina A1 - Bornhorst, Julia T1 - Differences and interactions in placental manganese and iron transfer across an in vitro model of human villous trophoblasts JF - International journal of molecular sciences N2 - Manganese (Mn) as well as iron (Fe) are essential trace elements (TE) important for the maintenance of physiological functions including fetal development. However, in the case of Mn, evidence suggests that excess levels of intrauterine Mn are associated with adverse pregnancy outcomes. Although Mn is known to cross the placenta, the fundamentals of Mn transfer kinetics and mechanisms are largely unknown. Moreover, exposure to combinations of TEs should be considered in mechanistic transfer studies, in particular for TEs expected to share similar transfer pathways. Here, we performed a mechanistic in vitro study on the placental transfer of Mn across a BeWo b30 trophoblast layer. Our data revealed distinct differences in the placental transfer of Mn and Fe. While placental permeability to Fe showed a clear inverse dose-dependency, Mn transfer was largely independent of the applied doses. Concurrent exposure of Mn and Fe revealed transfer interactions of Fe and Mn, indicating that they share common transfer mechanisms. In general, mRNA and protein expression of discussed transporters like DMT1, TfR, or FPN were only marginally altered in BeWo cells despite the different exposure scenarios highlighting that Mn transfer across the trophoblast layer likely involves a combination of active and passive transport processes. KW - manganese KW - iron KW - placental transfer KW - TE interactions KW - BeWo b30 KW - trophoblasts Y1 - 2022 U6 - https://doi.org/10.3390/ijms23063296 SN - 1422-0067 VL - 23 IS - 6 PB - MDPI CY - Basel ER - TY - JOUR A1 - Crovetto, Andrea A1 - Kojda, Danny A1 - Yi, Feng A1 - Heinselman, Karen N. A1 - LaVan, David A. A1 - Habicht, Klaus A1 - Unold, Thomas A1 - Zakutayev, Andriy T1 - Crystallize It before It diffuses BT - kinetic stabilization of thin-film phosphorus-rich semiconductor CuP2 JF - Journal of the american chemical society N2 - Numerous phosphorus-rich metal phosphides containing both P-P bonds and metal-P bonds are known from the solid-state chemistry literature. A method to grow these materials in thin-film form would be desirable, as thin films are required in many applications and they are an ideal platform for high-throughput studies. In addition, the high density and smooth surfaces achievable in thin films are a significant advantage for characterization of transport and optical properties. Despite these benefits, there is hardly any published work on even the simplest binary phosphorus-rich phosphide films. Here, we demonstrate growth of single-phase CuP2 films by a two-step process involving reactive sputtering of amorphous CuP2+x and rapid annealing in an inert atmosphere. At the crystallization temperature, CuP2 is thermodynamically unstable with respect to Cu3P and P-4. However, CuP2 can be stabilized if the amorphous precursors are mixed on the atomic scale and are sufficiently close to the desired composition (neither too P poor nor too P rich). Fast formation of polycrystalline CuP2, combined with a short annealing time, makes it possible to bypass the diffusion processes responsible for decomposition. We find that thin-film CuP2 is a 1.5 eV band gap semiconductor with interesting properties, such as a high optical absorption coefficient (above 10(5) cm(-1)), low thermal conductivity (1.1 W/(K m)), and composition-insensitive electrical conductivity (around 1 S/cm). We anticipate that our processing route can be extended to other phosphorus-rich phosphides that are still awaiting thin-film synthesis and will lead to a more complete understanding of these materials and of their potential applications. Y1 - 2022 U6 - https://doi.org/10.1021/jacs.2c04868 SN - 0002-7863 SN - 1520-5126 VL - 144 IS - 29 SP - 13334 EP - 13343 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Lepre, Enrico A1 - Heske, Julian A1 - Nowakowski, Michal A1 - Scoppola, Ernesto A1 - Zizak, Ivo A1 - Heil, Tobias A1 - Kühne, Thomas D. A1 - Antonietti, Markus A1 - Lopez-Salas, Nieves A1 - Albero, Josep T1 - Ni-based electrocatalysts for unconventional CO2 reduction reaction to formic acid JF - Nano energy N2 - Electrochemical reduction stands as an alternative to revalorize CO2. Among the different alternatives, Ni single atoms supported on carbonaceous materials are an appealing catalytic solution due to the low cost and versatility of the support and the optimal usage of Ni and its predicted selectivity and efficiency (ca. 100% towards CO). Herein, we have used noble carbonaceous support derived from cytosine to load Ni subnanometric sites. The large heteroatom content of the support allows the stabilization of up to 11 wt% of Ni without the formation of nanoparticles through a simple impregnation plus calcination approach, where nickel promotes the stabilization of C3NOx frameworks and the oxidative support promotes a high oxidation state of nickel. EXAFS analysis points at nickel single atoms or subnanometric clusters coordinated by oxygen in the material surface. Unlike the wellknown N-coordinated Ni single sites selectivity towards CO2 reduction, O-coordinated-Ni single sites (ca. 7 wt% of Ni) reduced CO2 to CO, but subnanometric clusters (11 wt% of Ni) foster the unprecedented formation of HCOOH with 27% Faradaic efficiency at - 1.4 V. Larger Ni amounts ended up on the formation of NiO nanoparticles and almost 100% selectivity towards hydrogen evolution. KW - CO 2 reduction reaction KW - Noble carbon KW - Ni-O4 electrocatalysts KW - Formic acid Y1 - 2022 U6 - https://doi.org/10.1016/j.nanoen.2022.107191 SN - 2211-2855 SN - 2211-3282 VL - 97 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Mei, Shilin A1 - Siebert, Andreas A1 - Xu, Yaolin A1 - Quan, Ting A1 - Garcia-Diez, Raul A1 - Bär, Marcus A1 - Härtel, Paul A1 - Abendroth, Thomas A1 - Dörfler, Susanne A1 - Kaskel, Stefan A1 - Lu, Yan T1 - Large-Scale Synthesis of Nanostructured Carbon-Ti4O7 Hollow Particles as Efficient Sulfur Host Materials for Multilayer Lithium-Sulfur Pouch Cells JF - Batteries & supercaps N2 - Applications of advanced cathode materials with well-designed chemical components and/or optimized nanostructures promoting the sulfur redox kinetics and suppressing the shuttle effect of polysulfides are highly valued. However, in the case of actual lithium-sulfur (Li-S) batteries under practical working conditions, one long-term obstacle still exists, which is mainly due to the difficulties in massive synthesis of such nanomaterials with low cost and ease of control on the nanostructure. Herein, we develop a facile synthesis of carbon coated Ti4O7 hollow nanoparticles (Ti4O7) using spherical polymer electrolyte brush as soft template, which is scalable via utilizing a minipilot reactor. The C Ti4O7 hollow nanoparticles provide strong chemical adsorption to polysulfides through the large polar surface and additional physical confinement by rich micro- & mesopores and have successfully been employed as an efficient sulfur host for multilayer pouch cells. Besides, the sluggish kinetics of the sulfur and lithium sulfide redox mechanism can be improved by the highly conductive Ti4O7 via catalyzation of the conversion of polysulfides. Consequently, the C-Ti4O7 based pouch cell endows a high discharge capacity of 1003 mAhg(-1) at 0.05 C, a high-capacity retention of 83.7% after 100 cycles at 0.1 C, and a high Coulombic efficiency of 97.5% at the 100th cycle. This work proposes an effective approach to transfer the synthesis of hollow Ti4O7 nanoparticles from lab- to large-scale production, paving the way to explore a wide range of advanced nanomaterials for multilayer Li-S pouch cells. KW - lithium-sulfur batteries KW - pouch cell KW - spherical polyelectrolyte brushes (SPB) KW - Ti4O7 Y1 - 2022 U6 - https://doi.org/10.1002/batt.202100398 SN - 2566-6223 VL - 5 IS - 6 PB - Wiley-VCH CY - Weinheim ER -