TY - THES A1 - Lemke, Karina T1 - Abtrennung und Charakterisierung von Polyelektrolyt-modifizierten Nanopartikeln T1 - Separation and characterization of polyelectrolyte-modified nanoparticles N2 - Gegenstand der Dissertation ist die größen- und eigenschaftsoptimierte Synthese und Charakterisierung von anorganischen Nanopartikeln in einer geeigneten Polyelektrolytmodifizierten Mikroemulsion. Das Hauptziel bildet dabei die Auswahl einer geeigneten Mikroemulsion, zur Synthese von kleinen, stabilen, reproduzierbaren Nanopartikeln mit besonderen Eigenschaften. Die vorliegende Arbeit wurde in zwei Haupteile gegliedert. Der erste Teil befasst sich mit der Einmischung von unterschiedlichen Polykationen (lineares Poly (diallyldimethylammoniumchlorid) (PDADMAC) und verzweigtes Poly (ethylenimin) (PEI)) in verschiedene, auf unterschiedlichen Tensiden (CTAB - kationisch, SDS - anionisch, SB - zwitterionisch) basierenden, Mikroemulsionssysteme. Dabei zeigt sich, dass das Einmischen der Polykationen in die Wassertröpfchen der Wasser-in-Öl (W/O) Mikroemulsion prinzipiell möglich ist. Der Einfluss der verschiedenen Polykationen auf das Phasenverhalten der W/O Mikroemulsion ist jedoch sehr unterschiedlich. In Gegenwart des kationischen Tensids führen die repulsiven Wechselwirkungen mit den Polykationen zu einer Destabilisierung des Systems, während die ausgeprägten Wechselwirkungen mit dem anionischen Tensid in einer deutlichen Stabilisierung des Systems resultieren. Für das zwitterionische Tensid führen die moderaten Wechselwirkungen mit den Polykationen zu einer partiellen Stabilisierung. Der zweite Teil der Arbeit beschäftigt sich mit dem Einsatz der unterschiedlichen, Polyelektrolyt- modifizierten Mikroemulsionen als Templatphase für die Herstellung verschiedener, anorganischer Nanopartikel. Die CTAB-basierte Mikroemulsion erweist sich dabei als ungeeignet für die Herstellung von CdS Nanopartikeln, da zum einen nur eine geringe Toleranz gegenüber den Reaktanden vorhanden ist (Destabilisierungseffekt) und zum anderen das Partikelwachstum durch den Polyelektrolyt-Tensid-Film nicht ausreichend begrenzt wird. Zudem zeigt sich, dass eine Abtrennung der Partikel aus der Mikroemulsion nicht möglich ist. Die SDS-basierten Mikroemulsionen, erweisen sich als geeignete Templatphase zur Synthese kleiner anorganischer Nanopartikel (3 – 20 nm). Sowohl CdS Quantum Dots, als auch Gold Nanopartikel konnten erfolgreich in der Mikroemulsion synthetisiert werden, wobei das verzweigte PEI einen interessanten Templat-Effekt in der Mikroemulsion hervorruft. Als deutlicher Nachteil der SDS-basierten Mikroemulsionen offenbaren sich die starken Wechselwirkungen zwischen dem Tensid und den Polyelektrolyten während der Aufarbeitung der Nanopartikel aus der Mikroemulsion. Dabei erweist sich die Polyelektrolyt-Tensid-Komplexbildung als hinderlich für die Redispergierung der CdS Quantum Dots in Wasser, so dass Partikelaggregation einsetzt. Die SB-basierten Mikroemulsionen erweisen sich als günstige Templatphase für die Bildung von größen- und eigenschaftenoptimierten Nanopartikeln (< 4 nm), wobei insbesondere eine Modifizierung mit PEI als ideal betrachtet werden kann. In Gegenwart des verzweigten PEI gelang es erstmals ultrakleine, fluoreszierende Gold Cluster (< 2 nm) in einer SB-basierten Mikroemulsion als Templatphase herzustellen. Als besonderer Vorteil der SB-basierten Mikroemulsion zeigen sich die moderaten Wechselwirkungen zwischen dem zwitterionischen Tensid und den Polyelektrolyten, welche eine anschließende Abtrennung der Partikel aus der Mikroemulsion unter Erhalt der Größe und ihrer optischen Eigenschaften ermöglichen. In der redispergierten wässrigen Lösung gelang somit eine Auftrennung der PEI-modifizierten Partikel mit Hilfe der asymmetrischer Fluss Feldflussfraktionierung (aF FFF). Die gebildeten Nanopartikel zeigen interessante optische Eigenschaften und können zum Beispiel erfolgreich zur Modifizierung von Biosensoren eingesetzt werden. N2 - This work is focused on the formation, recovery and characterisation of inorganic nanoparticles in a tailor-made polycation-modified reverse microemulsion. The main aim is the choice of an adequate microemulsion for the synthesis of small, uniform, reproducible nanoparticles with specialn characteristics. The first part is focused on the incorporation of two different polycations, low molecular weight linear poly(diallyldimethylammonium chloride) (PDADMAC) and low molecular weight branched poly(ethyleneimine) (PEI) in different surfactant-based (CTAB – cationic, SDS – anionic, SB - zwitterionic) w/o microemulsions. In principle the incorporation of the polycations in the small water droplets is possible, but the influence of the polycations on the phase behaviour is different. Repulsive interactions induce a destabilisation of the w/o microemulsion for cationic surfactant CTAB, while the distinctive interactions between the anionic surfactant SDS and the polycations induce an extension of the phase range and a considerable stabilisation. In case of zwitterionic surfactant SB a partial destabilisation can be observed, according to the lower interactions with the polycations. The second part is focused on the formation of different, inorganic nanoparticles in these polyelectrolyte-modified reverse microemulsions as a template phase. The CTAB-based microemulsion is not adequate for the formation of CdS nanoparticles, according to the low tolerance towards the reactants (destabilisation effect). Furthermore the particle growth cannot be limited by the surfactant-polycation-film and a recovery of the nanoparticles from the microemulsion is not possible. The results show that the SDS-based quaternary template phase consisting of water, toluene-pentanol (1:1), and the anionic surfactant SDS in presence of PEI or PDADMAC can be successfully used for the synthesis of polymer capped inorganic nanoparticles (3 – 20 nm). CdS quantum dots, as well as gold nanoparticles are successfully synthesised in the microemulsion droplets. Especially PEI acts as a reducing and stabilizing agent and shows an additional, interesting template effect in the microemulsion. Unfortunately a recovery of the nanoparticles without a particle aggregation is not possible due to the strong surfactant polycation interactions, which lead to polycation-surfactant complexes. The SB-based microemulsion can be successfully used as a tailor-made polycation-modifiedreverse microemulsion for the formation of small, uniform nanoparticles (< 4 nm) with special characteristics. Especially a modification with PEI is optimal and for the first time small, fluorescent gold cluster (< 2 nm) can be synthesised in a SB-based microemulsion as template phase. The results show that the electrostatic interactions between the polycation and the surfactant are of high relevance especially in the solvent evaporation and redispersion process. That means only in the case of moderate polycation-surfactant interactions a redispersion of the polymer capped particles without problems of aggregation is possible and the size and characteristics are unchanged in the redispersed solution. By means of asymmetric flow field flow fractionation (af-fff) it becomes possible to separate the two cluster fractions from each other as well as from the nanoparticle fraction with diameter > 5 nm. This opens a way to use the nanoparticles with their interesting, optical characteristics in different new fields of application for example for modification of biosensors. KW - Mikroemulsion KW - Gold Cluster KW - Quantum Dots KW - Feldflussfraktionierung KW - Nanopartikel KW - Microemulsion KW - Gold Cluster KW - Quantum Dots KW - Field Flow Fractionation KW - Nanoparticles Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-68133 ER - TY - THES A1 - Note, Carine T1 - Influence of hydrophobically modified polyelectrolytes on nanoparticle synthesis in self-organized systems and in water T1 - Einfluss von hydrophob modifizierten Polyelektrolyten auf die Nanopartikelsynthese in selbst-organisierten Systemen und in Wasser N2 - The formation of colloids by the controlled reduction, nucleation, and growth of inorganic precursor salts in different media has been investigated for more than a century. Recently, the preparation of ultrafine particles has received much attention since they can offer highly promising and novel options for a wide range of technical applications (nanotechnology, electrooptical devices, pharmaceutics, etc). The interest derives from the well-known fact that properties of advanced materials are critically dependent on the microstructure of the sample. Control of size, size distribution and morphology of the individual grains or crystallites is of the utmost importance in order to obtain the material characteristics desired. Several methods can be employed for the synthesis of nanoparticles. On the one hand, the reduction can occur in diluted aqueous or alcoholic solutions. On the other hand, the reduction process can be realized in a template phase, e.g. in well-defined microemulsion droplets. However, the stability of the nanoparticles formed mainly depends on their surface charge and it can be influenced with some added protective components. Quite different types of polymers, including polyelectrolytes and amphiphilic block copolymers, can for instance be used as protecting agents. The reduction and stabilization of metal colloids in aqueous solution by adding self-synthesized hydrophobically modified polyelectrolytes were studied in much more details. The polymers used are hydrophobically modified derivatives of poly(sodium acrylate) and of maleamic acid copolymers as well as the commercially available branched poly(ethyleneimine). The first notable result is that the polyelectrolytes used can act alone as both reducing and stabilizing agent for the preparation of gold nanoparticles. The investigation was then focused on the influence of the hydrophobic substitution of the polymer backbone on the reduction and stabilization processes. First of all, the polymers were added at room temperature and the reduction process was investigated over a longer time period (up to 8 days). In comparison, the reduction process was realized faster at higher temperature, i.e. 100°C. In both cases metal nanoparticles of colloidal dimensions can be produced. However, the size and shape of the individual nanoparticles mainly depends on the polymer added and the temperature procedure used. In a second part, the influence of the prior mentioned polyelectrolytes was investigated on the phase behaviour as well as on the properties of the inverse micellar region (L2 phase) of quaternary systems consisting of a surfactant, toluene-pentanol (1:1) and water. The majority of the present work has been made with the anionic surfactant sodium dodecylsulfate (SDS) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) since they can interact with the oppositely charged polyelectrolytes and the microemulsions formed using these surfactants present a large water-in-oil region. Subsequently, the polymer-modified microemulsions were used as new templates for the synthesis of inorganic particles, ranging from metals to complex crystallites, of very small size. The water droplets can indeed act as nanoreactors for the nucleation and growth of the particles, and the added polymer can influence the droplet size, the droplet-droplet interactions, as well as the stability of the surfactant film by the formation of polymer-surfactant complexes. One further advantage of the polymer-modified microemulsions is the possibility to stabilize the primary formed nanoparticles via a polymer adsorption (steric and/or electrostatic stabilization). Thus, the polyelectrolyte-modified nanoparticles formed can be redispersed without flocculation after solvent evaporation. N2 - Die Bildung von Kolloiden durch kontrollierte Reduktion, durch Keimbildung und durch Wachstum anorganischer Precurser in unterschiedlichen Medien wird seit mehr als einem Jahrhundert intensiv beforscht. Vor kurzem hat die Herstellung ultrafeiner Partikel viel Aufmerksamkeit errungen, da sich hieraus vielversprechende neue Möglichkeiten für ein breites Spektrum an technischen Anwendungen (Nanotechnologie, elektrooptische Materialen, Pharmazeutik, usw.) ergeben. Das Interesse leitet sich von der weithin bekannten Tatsache ab, dass die Eigenschaften der „advanced materials“ von der Mikrostruktur der Probe deutlich abhängig sind. Die gezielte Steuerung der Größe, der Größenverteilung und der Morphologie der einzelnen Keime oder Kristallite ist von größter Wichtigkeit, um die gewünschten Eigenschaften zu erreichen. Verschiedene Methoden können für die Synthese von Nanopartikel verwendet werden. Einerseits kann eine Reduktion in verdünnten wässrigen oder alkoholischen Lösungen stattfinden, andererseits kann der Reduktionsprozess in einer Templatphase, z.B. in definierten Mikroemulsionströpfchen stattfinden. Die Stabilität der produzierten Nanopartikel hängt hauptsächlich von ihrer Oberflächenladung ab, welche durch schützende Komponenten zusätzlich beeinflusst werden kann. Verschiedene Arten von Polymeren, einschließlich Polyelektrolyte und amphiphile Blockcopolymere, können als solche Komponenten benutzt werden. Die Reduktion und Stabilisierung von Metallkolloiden in der wässrigen Lösung durch Addition von hydrophob modifizierten Polyelektrolyten werden bereits ausführlich studiert. Die verwendeten Polymere sind hydrophob modifizierte Derivate des Natrium-Polyacrylat, der Maleinsäure Copolymere sowie das verzweigte Poly(ethylenimin). Erstaunlicherweise genügt bereits die Anwesenheit die verwendeten Polyelektrolyte zu Reduzierung und Stabilisierung der Goldnanopartikel. Darüber hinaus wurde der Einfluss der hydrophoben Seitenkette des Polymer auf den Reduktions- und Stabilisierungsprozess bei unterschiedliche Reaktionstemperatur untersucht. In beiden Fällen können Metallnanopartikel kolloidaler Größe hergestellt werden, jedoch hängt die Größe und die Form der einzelnen Nanopartikel hauptsächlich vom dem zugefügten Polymer und vom verwendeten Temperaturverfahren ab. Im zweiten Teil wurde der Einfluss der vorher erwähnten Polyelektrolyte auf das Phaseverhalten sowie auf die Eigenschaften der inversen mizellaren Region (L2 Phase) der quaternären Systeme untersucht, die aus einem Tensid, Toluol-Pentanol – Gemisch (1:1) sowie Wasser bestehen. Dabei wurden hauptsächlich ionische Tenside, wie z.B. das anionische Natriumdodecylsulfate (SDS) und das kationische Cetyltrimethylammonium-bromid (CTAB) verwendet, da sie mit den geladenen Polyelektrolyten wechselwirken können. Darüber hinaus wurden die polymer-modifizierten Mikroemulsionen als neue Template für die Synthese von anorganischen Nanopartikeln verwendet. Die Wassertröpfchen können in der Tat als Nanoreaktoren für die Keimbildung und das Wachstum der Partikel dienen, und das zugefügte Polymer kann die Tröpfchengröße, die Tröpfchen-Tröpfchen Wechselwirkungen, sowie die Stabilität des Tensidfilms durch Polyelektrolyt-Tensid Komplexbildung beeinflussen. Ein weiterer Vorteil der polymer-modifizierten Mikroemulsionen ist die Stabilizierung der produzierten Primärteilchen über eine Polymeradsorption (durch sterische bzw. elektrostatische Stabilisierung), welche eine Redispergierung der Polyelektrolyte-modifiziert Nanopartikel, nach Lösungsmittel-verdampfung, ohne Aggregation der Partikel erlaubt. KW - Mikroemulsion KW - Nanopartikel KW - Polyelektrolyte KW - microemulsion KW - polyelectrolyte KW - nanoparticle Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-11670 ER - TY - THES A1 - Wolf, Gunter T1 - Diffusionsuntersuchungen an (polymer-modifizierten) Mikroemulsionen mittels Feldgradientenimpuls-NMR-Spektroskopie T1 - Diffusion studies in (polymer-modified) microemulsions using pulsed field gradient NMR spectroscopy N2 - Aufgrund des großen Verhältnisses von Oberfläche zu Volumen zeigen Nanopartikel interessante, größenabhängige Eigenschaften, die man im ausgedehnten Festkörper nicht beobachtet. Sie sind daher von großem wissenschaftlichem und technologischem Interesse. Die Herstellung kleinster Partikel ist aus diesem Grund überaus wünschenswert. Dieses Ziel kann mit Hilfe von Mikroemulsionen als Templatphasen bei der Herstellung von Nanopartikeln erreicht werden. Mikroemulsionen sind thermodynamisch stabile, transparente und isotrope Mischungen von Wasser und Öl, die durch einen Emulgator stabilisiert sind. Sie können eine Vielzahl verschiedener Mikrostrukturen bilden. Die Kenntnis der einer Mikroemulsion zugrunde liegenden Struktur und Dynamik ist daher von außerordentlicher Bedeutung, um ein gewähltes System potentiell als Templatphase zur Nanopartikelherstellung einsetzen zu können. In der vorliegenden Arbeit wurden komplexe Mehrkomponentensysteme auf der Basis einer natürlich vorkommenden Sojabohnenlecithin-Mischung, eines gereinigten Lecithins und eines Sulfobetains als Emulgatoren mit Hilfe der diffusionsgewichteten 1H-NMR-Spektroskopie unter Verwendung gepulster Feldgradienten (PFG) in Abhängigkeit des Zusatzes des Polykations Poly-(diallyl-dimethyl-ammoniumchlorid) (PDADMAC) untersucht. Der zentrale Gegenstand dieser Untersuchungen war die strukturelle und dynamische Charakterisierung der verwendeten Mikroemulsionen hinsichtlich ihrer potentiellen Anwendbarkeit als Templatphasen für die Herstellung möglichst kleiner Nanopartikel. Die konzentrations- und zeit-abhängige NMR-Diffusionsmessung stellte sich dabei als hervorragend geeignete und genaue Methode zur Untersuchung der Mikrostruktur und Dynamik in den vorliegenden Systemen heraus. Die beobachtete geschlossene Wasser-in-Öl- (W/O-) Mikrostruktur der Mikroemulsionen zeigt deutlich deren potentielle Anwendbarkeit in der Nanopartikelsynthese. Das Gesamtdiffusionsverhalten des Tensides wird durch variierende Anteile aus der Verschiebung gesamter Aggregate, der Monomerdiffusion im Medium bzw. der medium-vermittelten Oberflächendiffusion bestimmt. Dies resultierte in einigen Fällen in einer anormalen Diffusionscharakteristik. In allen Systemen liegen hydrodynamische und direkte Wechselwirkungen zwischen den Tensidaggregaten vor. Der Zusatz von PDADMAC zu den Mikroemulsionen resultiert in einer Stabilisierung der flüssigen Grenzfläche der Tensidaggregate aufgrund der Adsorption des Polykations auf den entgegengesetzt geladenen Tensidfilm und kann potentiell zu Nanopartikeln mit kleineren Dimensionen und schmaleren Größenverteilungen führen. N2 - Owing to their large surface-to-volume ratio nanoparticles show interesting size-dependent properties that are not observable in bulk materials. Thus, they are of great scientific and technological interest. Thereby, the highly desirable preparation of as small particles as possible might be easily achieved using microemulsions as template phases. Microemulsions are thermodynamically stable, transparent and isotropic mixtures of water and oil stabilized by an emulsifying agent. However, microemulsions may form a great variety of different microstructures. Thus, it is of utmost importance to know the underlying microstructure and microdynamics of a chosen microemulsion system in order to use it as a template phase for nanoparticle formation. In the present study complex multi-component microemulsion systems based on a naturally occurring soybean lecithin mixture, purified lecithin and sulfobetaine as emulsifiers were investigated by diffusion-weighted pulsed field gradient (PFG) 1H NMR spectroscopy in the presence and absence of the polycation poly-(diallyldimethylammonium chloride) (PDADMAC). The central topic of this study was to structurally and dynamically characterize the present microemulsions with respect to their potential use in nanoparticle formation. The concentration- and time-dependent NMR diffusion measurements turned out to be a suitable and accurate tool to investigate the microstructure and microdynamics of the systems under investigation. They reveal closed water-in-oil (W/O) microemulsion microstructures which prove the potential suitability of the respective systems as template phases for the preparation of nano-sized particles. The overall diffusion behavior of surfactants were found to be governed by varying contributions from displacements of entire aggregates, monomer diffusion in the medium and bulk-mediated surface diffusion, respectively. In some cases this led to a marked anomalous diffusion characteristics. In all systems interactions between aggregates are dominated by hydrodynamic and direct forces. The addition of PDADMAC to the microemulsion systems results in a stabilization of the liquid interface of surfactant aggregates due to the adsorption of the polycation at the oppositely charged surfactant film and may potentially lead to nanoparticles of smaller dimensions and narrower size distributions. KW - Mikroemulsion KW - Mikrostruktur KW - Magnetische Kernresonanz KW - PFG-NMR-Spektroskopie KW - Selbstdiffusion KW - Anomale Diffusion KW - Polykation KW - Inverse Micelle KW - Wasser-in-Öl-Mikroemulsion KW - Tensiddynamik KW - medium-vermittelte Oberflächendiffusion KW - Levy-Bewegung KW - water-in-oil microemulsion KW - surfactant dynamics KW - bulk-mediated surface diffusion KW - Levy walk Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6259 ER -