TY - THES A1 - Siegmund, Nicole T1 - Wind driven soil particle uptake Quantifying drivers of wind erosion across the particle size spectrum T1 - Partikelaufwirbelung durch Wind - Über die Quantifizierung von Winderosion über das ganze Partikel-Größenspektrum N2 - Among the multitude of geomorphological processes, aeolian shaping processes are of special character, Pedogenic dust is one of the most important sources of atmospheric aerosols and therefore regarded as a key player for atmospheric processes. Soil dust emissions, being complex in composition and properties, influence atmospheric processes and air quality and has impacts on other ecosystems. In this because even though their immediate impact can be considered low (exceptions exist), their constant and large-scale force makes them a powerful player in the earth system. dissertation, we unravel a novel scientific understanding of this complex system based on a holistic dataset acquired during a series of field experiments on arable land in La Pampa, Argentina. The field experiments as well as the generated data provide information about topography, various soil parameters, the atmospheric dynamics in the very lower atmosphere (4m height) as well as measurements regarding aeolian particle movement across a wide range of particle size classes between 0.2μm up to the coarse sand. The investigations focus on three topics: (a) the effects of low-scale landscape structures on aeolian transport processes of the coarse particle fraction, (b) the horizontal and vertical fluxes of the very fine particles and (c) the impact of wind gusts on particle emissions. Among other considerations presented in this thesis, it could in particular be shown, that even though the small-scale topology does have a clear impact on erosion and deposition patterns, also physical soil parameters need to be taken into account for a robust statistical modelling of the latter. Furthermore, specifically the vertical fluxes of particulate matter have different characteristics for the particle size classes. Finally, a novel statistical measure was introduced to quantify the impact of wind gusts on the particle uptake and its application on the provided data set. The aforementioned measure shows significantly increased particle concentrations during points in time defined as gust event. With its holistic approach, this thesis further contributes to the fundamental understanding of how atmosphere and pedosphere are intertwined and affect each other. N2 - Unter der Vielzahl geomorphologischer Prozesse nehmen äolische Formgebungsprozesse eine besondere Stellung ein, denn obwohl ihre unmittelbaren Auswirkungen als gering einzuschätzen sind (Ausnahmen existieren), sind sie aufgrund ihrer konstanten und großen Kraft ein mächtiger Akteur im Erdsystem. Pedogener Staub ist eine der wichtigsten Quellen atmosphärischer Aerosole und kann daher als Schlüsselfaktor für atmosphärische Prozesse angesehen werden. Bodenstaubemissionen, die in Zusammensetzung und Eigenschaften komplex sind, beeinflussen atmosphärische Prozesse und Luftqualität und haben Auswirkungen auf andere Ökosysteme. Um zum wissenschaftlichen Verständnis dieses komplexen Systems beizutragen, dokumentiert diese Arbeit eine Reihe von Veröffentlichungen, die alle auf einem ganzheitlichen Datensatz basieren, die während einer Reihe von Feldexperimenten auf Ackerland in La Pampa, Argentinien, gewonnen wurden. Die Feldexperimente sowie die generierten Daten liefern Informationen über Topographie, verschiedene Bodenparameter, die atmosphärische Dynamik in der unteren Atmosphäre (4 m Höhe) sowie Messungen zur äolischen Partikelbewegung über einen weiten Bereich von Partikelgrößenklassen zwischen 0,2μm und groben Sand. Die Untersuchungen konzentrieren sich auf drei Themen: Die Auswirkungen kleinräumiger Landschaftsstrukturen auf äolische Transportprozesse der groben Partikelfraktion, die horizontalen und vertikalen Strömungen der sehr feinen Partikel und der Einfluss von Windböen auf die Partikelemissionen. Neben anderen in dieser Arbeit vorgestellten Überlegungen konnte insbesondere gezeigt werden, dass, obwohl die kleinräumige Topologie einen deutlichen Einfluss auf Erosions- und Ablagerungsmuster hat, auch physikalische Bodenparameter für eine robuste statistische Modellierung berücksichtigt werden müssen. Darüber hinaus weisen speziell die vertikalen Feinstaubflüsse unterschiedliche Eigenschaften für die Partikelgrößenklassen auf. Schließlich wurde ein neuartiges statistisches Maß eingeführt, um den Einfluss von Windböen auf die Partikelkonzentration der Luft zu quantifizieren, und seine Anwendung auf den bereitgestellten Datensatz zeigt signifikant erhöhte Partikelkonzentrationen zu Zeitpunkten, die als Böen definiert wurden. Mit ihrem ganzheitlichen Ansatz trägt diese Arbeit weiter zum grundlegenden Verständnis bei, wie Atmosphäre und Pedosphäre miteinander verflochten sind und sich gegenseitig beeinflussen. KW - Winderosion KW - winderosion KW - PM10, PM2, PM1 KW - Horizontal flux KW - horizontaler Fluss KW - Vertical flux KW - vertikaler Fluss KW - Argentina KW - Argentinien KW - wind gusts KW - Windböen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-574897 ER - TY - THES A1 - Meeßen, Christian T1 - The thermal and rheological state of the Northern Argentinian foreland basins T1 - Der thermische und rheologische Zustand der Nordargentinischen Vorlandbecken N2 - The foreland of the Andes in South America is characterised by distinct along strike changes in surface deformational styles. These styles are classified into two end-members, the thin-skinned and the thick-skinned style. The superficial expression of thin-skinned deformation is a succession of narrowly spaced hills and valleys, that form laterally continuous ranges on the foreland facing side of the orogen. Each of the hills is defined by a reverse fault that roots in a basal décollement surface within the sedimentary cover, and acted as thrusting ramp to stack the sedimentary pile. Thick-skinned deformation is morphologically characterised by spatially disparate, basement-cored mountain ranges. These mountain ranges are uplifted along reactivated high-angle crustal-scale discontinuities, such as suture zones between different tectonic terranes. Amongst proposed causes for the observed variation are variations in the dip angle of the Nazca plate, variation in sediment thickness, lithospheric thickening, volcanism or compositional differences. The proposed mechanisms are predominantly based on geological observations or numerical thermomechanical modelling, but there has been no attempt to understand the mechanisms from a point of data-integrative 3D modelling. The aim of this dissertation is therefore to understand how lithospheric structure controls the deformational behaviour. The integration of independent data into a consistent model of the lithosphere allows to obtain additional evidence that helps to understand the causes for the different deformational styles. Northern Argentina encompasses the transition from the thin-skinned fold-and-thrust belt in Bolivia, to the thick-skinned Sierras Pampeanas province, which makes this area a well suited location for such a study. The general workflow followed in this study first involves data-constrained structural- and density-modelling in order to obtain a model of the study area. This model was then used to predict the steady-state thermal field, which was then used to assess the present-day rheological state in northern Argentina. The structural configuration of the lithosphere in northern Argentina was determined by means of data-integrative, 3D density modelling verified by Bouguer gravity. The model delineates the first-order density contrasts in the lithosphere in the uppermost 200 km, and discriminates bodies for the sediments, the crystalline crust, the lithospheric mantle and the subducting Nazca plate. To obtain the intra-crustal density structure, an automated inversion approach was developed and applied to a starting structural model that assumed a homogeneously dense crust. The resulting final structural model indicates that the crustal structure can be represented by an upper crust with a density of 2800 kg/m³, and a lower crust of 3100 kg/m³. The Transbrazilian Lineament, which separates the Pampia terrane from the Río de la Plata craton, is expressed as a zone of low average crustal densities. In an excursion, we demonstrate in another study, that the gravity inversion method developed to obtain intra-crustal density structures, is also applicable to obtain density variations in the uppermost lithospheric mantle. Densities in such sub-crustal depths are difficult to constrain from seismic tomographic models due to smearing of crustal velocities. With the application to the uppermost lithospheric mantle in the north Atlantic, we demonstrate in Tan et al. (2018) that lateral density trends of at least 125\,km width are robustly recovered by the inversion method, thereby providing an important tool for the delineation of subcrustal density trends. Due to the genetic link between subduction, orogenesis and retroarc foreland basins the question rises whether the steady-state assumption is valid in such a dynamic setting. To answer this question, I analysed (i) the impact of subduction on the conductive thermal field of the overlying continental plate, (ii) the differences between the transient and steady-state thermal fields of a geodynamic coupled model. Both studies indicate that the assumption of a thermal steady-state is applicable in most parts of the study area. Within the orogenic wedge, where the assumption cannot be applied, I estimated the transient thermal field based on the results of the conducted analyses. Accordingly, the structural model that had been obtained in the first step, could be used to obtain a 3D conductive steady-state thermal field. The rheological assessment based on this thermal field indicates that the lithosphere of the thin-skinned Subandean ranges is characterised by a relatively strong crust and a weak mantle. Contrarily, the adjacent foreland basin consists of a fully coupled, very strong lithosphere. Thus, shortening in northern Argentina can only be accommodated within the weak lithosphere of the orogen and the Subandean ranges. The analysis suggests that the décollements of the fold-and-thrust belt are the shallow continuation of shear zones that reside in the ductile sections of the orogenic crust. Furthermore, the localisation of the faults that provide strain transfer between the deeper ductile crust and the shallower décollement is strongly influenced by crustal weak zones such as foliation. In contrast to the northern foreland, the lithosphere of the thick-skinned Sierras Pampeanas is fully coupled and characterised by a strong crust and mantle. The high overall strength prevents the generation of crustal-scale faults by tectonic stresses. Even inherited crustal-scale discontinuities, such as sutures, cannot sufficiently reduce the strength of the lithosphere in order to be reactivated. Therefore, magmatism that had been identified to be a precursor of basement uplift in the Sierras Pampeanas, is the key factor that leads to the broken foreland of this province. Due to thermal weakening, and potentially lubrication of the inherited discontinuities, the lithosphere is locally weakened such that tectonic stresses can uplift the basement blocks. This hypothesis explains both the spatially disparate character of the broken foreland, as well as the observed temporal delay between volcanism and basement block uplift. This dissertation provides for the first time a data-driven 3D model that is consistent with geophysical data and geological observations, and that is able to causally link the thermo-rheological structure of the lithosphere to the observed variation of surface deformation styles in the retroarc foreland of northern Argentina. N2 - Das Vorland der südamerikanischen Anden ist durch lateral variierende Deformationsregimes des östlichen Vorlands geprägt. Dabei treten zwei grundlegend verschiedene Endglieder mit charakteristischer Architektur auf: flach abgescherte Falten- und Überschiebungsgürtel einerseits und Vorland-Sockelüberschiebungen ("zerbrochenes Vorland") andererseits. Das morphologische Erscheinungsbild der Falten- und Überschiebungsgürtel entspricht lateral ausgedehnten, dicht aneinander gereihten Abfolgen von Hügeln und Tälern. Die Hügel werden durch eine darunter liegende Überschiebung definiert, die in einem subhorizontalen Abscherhorizont in 10 bis 20 km Tiefe endet. Sockelüberschiebungen hingegen sind in Gebieten mit geringer Sedimentmächtigkeit zu finden und sind durch weit auseinander liegende Erhebungen charakterisiert, welche von steil einfallenden, reaktivierten krustenskaligen Verwerfungen begrenzt werden. Als Ursachen der beobachteten Deformationsvariationen wurden präexistente Schwächezonen, Sedimentmächtigkeiten, Lithosphärenverdickung, Vulkanismus oder kompositionelle Eigenschaften aufgeführt. Diese Vorschläge waren überwiegend konzeptuell und meist auf Grundlage von Feldbeobachtungen oder synthetischen numerischen, thermo-mechanischen Modelle abgeleitet. Die vorliegende Dissertation beleuchtet zum ersten mal die Ursachen der beobachteten Deformationsstile aus der Perspektive von dreidimensionaler, Daten-integrativer Modellierung. Durch die Integration voneinander unabhängiger Daten erlaubt diese Art der Beschreibung des physikalischen Zustands der Lithosphäre die Erlangung zusätzliche Hinweise auf die zugrundeliegenden Ursachen der verschiedenen Derformationsregimes. Für eine solche Studie bietet sich Nord-Argentinien an, da dort beide Vorland-Endglieder vorzufinden sind. Die dafür im wesentlichen durchgeführten Arbeitsschritte beinhalten die Erstellung eines strukturellen Dichtemodells des Untersuchungsgebiets, die Berechnung des 3D stationären thermischen Feldes, sowie die Analyse der rheologischen Eigenschaften der Lithosphäre. Das datenbasierte strukturelle Dichtemodell ist mit verschiedenen geologischen und geophysikalischen Beobachtungen sowie dem Bouguer-Schwerefeld konsistent. Dieses Modell bildet die primären Dichtekontraste der oberen 200 km der Lithosphäre ab und differenziert Körper für die Sedimente, die kristalline Kruste, den lithosphärischen Mantel, und die subduzierende Nazca-Platte. Um die krusteninterne Dichteverteilung zu erhalten wurde ein automatisierter Inversionsprozess entworfen der es erlaubt eine leichtere Oberkruste und eine schwerere Unterkruste geometrisch zu definieren. Die Modellierung zeigt, dass die Kruste in Nord-Argentinien durch eine leichtere Oberkruste (2800 kg/m³) und eine dichtere Unterkruste (3100 kg/m³) repräsentiert werden kann. Das Transbrasilianische Linement, welches das Pampia Terran im Westen vom Río de La Plata Kraton im Osten trennt, ist durch eine im Vergleich zur Umgebung geringere durchschnittliche Krustendichte charakterisiert. In einem Exkurs wird anschließend demonstriert, dass die hier entwickelte Inversionsmethodik zur Ermittlung von intrakrustalen Dichtekontrasten auch im obersten lithosphärischen Mantel angewandt werden kann. Dichten zwischen der Kruste-Mantel-Grenze und etwa 50\,km Tiefe sind besonders schwer zu bestimmen, da tomographische Modelle die Geschwindigkeitsvariationen von seismischen Wellen in diesen Bereichen nicht auflösen. In Tan u.a. (2018) demonstrieren wir, dass die Inversionsmethode Dichteverläufe mit einer lateralen Ausdehnung von 125 km oder weniger ermitteln kann, und somit einen wichtigen Beitrag zur Bestimmung von subkrustalen Dichteverteilungen im Mantel liefert. Wegen der genetischen Verbindung zwischen Subduktion, Orogenese und Retroarc Vorlandbecken stellt sich die Frage, ob die Annahme eines stationären thermischen Feldes für solch ein dynamisches Modelliergebiet zulässig ist. Um diese Frage zu beantworten wurde zum einen der Einfluss von Subduktion auf das konduktive thermische Feld auf die kontinentale Lithosphäre untersucht. Zum anderen wurde die Abweichung zwischen transientem und stationären thermischen Feld eines gekoppelten geodynamischen Modells untersucht. Beide Untersuchungen weisen darauf hin, dass die Annahme eines stationären thermischen Felds für den Großteil des Modelliergebiets zulässig ist. Im orogenen Keil, in dem diese Annahme nicht gilt, wurde das transiente thermische Feld mithilfe der erfolgten Untersuchungen abgeschätzt. Entsprechend kann für das Arbeitsgebiet im Vorland das strukturelle Modell aus dem ersten Schritt zur Berechnung des stationären 3D konduktiven thermischen Feldes herangezogen werden. Basierend auf der ermittelten Dichte- und Temperatur-Konfigurationen konnte anschließend die rheologische Konfiguration berechnet werden. Die rheologischen Analysen zeigen, dass die Lithosphäre in Falten- und Überschiebungsgürteln nur eine gerine Festigkeit besitzt und die Kruste Großteil zur integrierten Festigkeit beiträgt. Das benachbarte Vorlandbecken jedoch weist eine vollständig gekoppelte und starke Lithosphäre auf, weshalb Krustenverkürzung nur im vergleichsweise schwachen orogenen Keil aufgenommen werden kann. Daher komme ich zu der Schlussfolgerung, dass die Abscherhorizonte der Falten- und Überschiebungsgürtel die oberflächennahe Fortsetzung von Scherzonen in der duktilen Kruste unterhalb des Orogens sind. Die Lokalisation der Transferzonen zwischen der duktilen Kruste und dem Abscherhorizont sind dabei maßgeblich durch präexistente Schwächezonen in der Kruste beeinflusst. Im zerbrochenen Vorland der Sierras Pampeanas ist die Lithosphäre vollständig gekoppelt und durch einen Mantel hoher Festigkeit charakterisiert. Die sehr hohe integrierte lithosphärische Festigkeit des zerbrochenen Vorlands verhindert die Bildung von Störungen durch tektonische Kräfte. Selbst krustenskalige Schwächezonen können die Festigkeit nicht ausreichend reduzieren, weshalb eine thermische Schwächung benötigt wird. Daher spielt der Magmatismus, der in direkter Nachbarschaft zu den Schwächezonen in der Sierras Pampeanas nachgewiesen wurde, eine Schlüsselrolle in der Entstehung des zerbrochenen Vorlands. Diese Hypothese erklärt die große räumliche Distanz zwischen den Vorlandsockelüberschiebungen, sowie die beobachtete zeitliche Verzögerung zwischen Magmatismus und Hebung der Gebirgskämme. Die vorliegende Studie kann somit aufgrund Daten-integrativer Modellierung einen kausalen Zusammenhang zwischen der Lithosphärenstruktur, den beobachteten Deformationsmechanismen und unabhängigen geologischen Beobachtungen herstellen. KW - Argentina KW - Rheology KW - Foreland basin KW - Foreland basins KW - Density modelling KW - Chaco-Paraná basin KW - Andes KW - Argentinien KW - Rheologie KW - Vorlandbecken KW - Dichtemodellierung KW - Chaco-Paraná Becken KW - Anden Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439945 ER - TY - THES A1 - Ibarra, Federico T1 - The thermal and rheological state of the Central Andes and its relationship to active deformation processes T1 - Der thermische und rheologische Zustand der Zentralanden und seine Beziehung zu aktiven Deformationsprozessen N2 - The Central Andes region in South America is characterized by a complex and heterogeneous deformation system. Recorded seismic activity and mapped neotectonic structures indicate that most of the intraplate deformation is located along the margins of the orogen, in the transitions to the foreland and the forearc. Furthermore, the actively deforming provinces of the foreland exhibit distinct deformation styles that vary along strike, as well as characteristic distributions of seismicity with depth. The style of deformation transitions from thin-skinned in the north to thick-skinned in the south, and the thickness of the seismogenic layer increases to the south. Based on geological/geophysical observations and numerical modelling, the most commonly invoked causes for the observed heterogeneity are the variations in sediment thickness and composition, the presence of inherited structures, and changes in the dip of the subducting Nazca plate. However, there are still no comprehensive investigations on the relationship between the lithospheric composition of the Central Andes, its rheological state and the observed deformation processes. The central aim of this dissertation is therefore to explore the link between the nature of the lithosphere in the region and the location of active deformation. The study of the lithospheric composition by means of independent-data integration establishes a strong base to assess the thermal and rheological state of the Central Andes and its adjacent lowlands, which alternatively provide new foundations to understand the complex deformation of the region. In this line, the general workflow of the dissertation consists in the construction of a 3D data-derived and gravity-constrained density model of the Central Andean lithosphere, followed by the simulation of the steady-state conductive thermal field and the calculation of strength distribution. Additionally, the dynamic response of the orogen-foreland system to intraplate compression is evaluated by means of 3D geodynamic modelling. The results of the modelling approach suggest that the inherited heterogeneous composition of the lithosphere controls the present-day thermal and rheological state of the Central Andes, which in turn influence the location and depth of active deformation processes. Most of the seismic activity and neo--tectonic structures are spatially correlated to regions of modelled high strength gradients, in the transition from the felsic, hot and weak orogenic lithosphere to the more mafic, cooler and stronger lithosphere beneath the forearc and the foreland. Moreover, the results of the dynamic simulation show a strong localization of deviatoric strain rate second invariants in the same region suggesting that shortening is accommodated at the transition zones between weak and strong domains. The vertical distribution of seismic activity appears to be influenced by the rheological state of the lithosphere as well. The depth at which the frequency distribution of hypocenters starts to decrease in the different morphotectonic units correlates with the position of the modelled brittle-ductile transitions; accordingly, a fraction of the seismic activity is located within the ductile part of the crust. An exhaustive analysis shows that practically all the seismicity in the region is restricted above the 600°C isotherm, in coincidence with the upper temperature limit for brittle behavior of olivine. Therefore, the occurrence of earthquakes below the modelled brittle-ductile could be explained by the presence of strong residual mafic rocks from past tectonic events. Another potential cause of deep earthquakes is the existence of inherited shear zones in which brittle behavior is favored through a decrease in the friction coefficient. This hypothesis is particularly suitable for the broken foreland provinces of the Santa Barbara System and the Pampean Ranges, where geological studies indicate successive reactivation of structures through time. Particularly in the Santa Barbara System, the results indicate that both mafic rocks and a reduction in friction are required to account for the observed deep seismic events. N2 - Die südamerikanischen Zentralanden zeichnen sich durch eine komplexe und heterogene Deformationsstruktur aus. Erdbebenaufzeichnungen und geologisch-tektonische Kartierungen zeigen, dass innerhalb der Südamerikanischen Platte die Hauptdeformation entlang beider Gebirgsränder stattfindet. Zusätzlich variiert die Art der aktiven Deformation und die Tiefenverteilung von Erdbeben im östlichen Vorland von Nord nach Süd. Dabei erstreckt sich das Auftreten von Erdbeben, auch seismogene Zone genannt, über einen zunehmend größeren Tiefenbereich. Die tektonische Deformation schließt ebenso, nach Süden hin zunehmend, größere Tiefenbereiche der Erdkruste mit ein. Erklärungen dieses Verhaltens auf der Grundlage von geologisch-geophysikalischen Untersuchungen sowie von numerischen Modellen legten bisher nahe, dass die Unterschiede der Sedimentmächtigkeiten, das Vorhandensein ererbter tektonischer Strukturen und die Variation des Eintauchwinkels der unter Südamerika abtauschenden Nazca-platte als Gründe dafür in Frage kommen. Allerdings gab es bislang keine Untersuchungen dazu, welche Rolle die lokale Zusammensetzung der Lithosphäre sowie ihr Fließverhalten dabei spielen. Das Hauptziel dieser Dissertation ist daher, den Zusammenhang zwischen Lithosphäreneigenschaften in der Region und dem Auftreten gewisser Deformationstypen an der Erdoberfläche zu untersuchen. Die Zuhilfenahme voneinander unabhängiger, geophysikalischer Beobachtungsparameter ermöglicht eine Beurteilung des thermischen und rheologischen Zustands der Zentralanden und angrenzender Vorlandgebiete, und damit eine bessere Einschätzung der komplexen Deformation. Der Workflow dieser Dissertation startet zunächst mit der Erstellung eines 3D-Dichtemodells auf der Grundlage von geologischen und seismologischen Beobachtungen, das zusätzlich mit Schweredaten untermauert wird. Dies ermöglicht die Simulation der räumlichen variierenden, stationären Wärmeleitung in der Lithosphäre und die Berechnung der mechanischen Stabilität. Schlussendlich werden diese Erkenntnisse in ein dreidimensionales geodynamisches Modell übertragen, welches Aufschluss über die Kompressionsdeformation zwischen dem Gebirge und dessen Vorland Auskunft gibt. Die Modellergebnisse zeigen, dass die ungleichmäßige Zusammensetzung der Lithosphäre der Schlüssel für den heute beobachtbaren thermischen und rheologischen Zustand der Zentralanden ist und damit auch der wichtigste Faktor zur Erklärung der räumlichen Variation und Tiefenverteilung aktiver Deformationsprozesse. Die meisten Erdbeben und neotektonischen Strukturen sind in Bereichen zu finden, für die der stärkste Festigkeitskontrast modelliert wurde. Dies betrifft den Übergang von felsischer, heißer und daher weicher Gebirgslithosphäre des Hauptkamms zu der eher mafischen, kalten und festeren Lithosphäre des Vorlands. Außerdem ergab die dynamische Simulation eine räumliche Zentrierung der zweiten Invariante der Rate des deviatorischen Spannungstensors in der gleichen Region. Damit kann davon ausgegangen werden, dass die stärkste Stauchung genau in diesem Übergang zwischen weichem und festen Material abläuft. Die Erdbebenverteilung in der Vertikalen scheint ebenso vom rheologischen Zustand der Lithosphäre abzuhängen. Für die verschiedenen morphotektonischen Provinzen korreliert die Tiefe, ab der die Erdbebenhäufigkeit abnimmt, jeweils mit der Lage der Übergangszone zwischen Sprödbruchdeformation und duktiler Verformung. Dadurch tritt ein Teil der Erdbeben im duktil verformten Bereich der Erdkruste auf. Weitere Untersuchungen zeigen, dass praktisch die gesamte Seismizität oberhalb der 600°C Isotherme abläuft, welche das obere Temperaturlimit für das Sprödbruchverhalten von Olivin darstellt. Daher kann das Auftreten von Erdbeben unterhalb der modellierten Übergangszone von Sprödbruch zu duktiler Deformation mit dem Vorhandensein von mafischen Gesteinsanteilen erklärt werden, welche als Überbleibsel aus vorangegangenen tektonischen Ereignissen installiert wurden. Eine weitere mögliche Erklärung für solche tiefen Erdbeben ist die Existenz von internen Scherzonen, entlang welcher Sprödbruchdeformation durch herabsetzen des Reibungswiderstandes erleichtert wird. Diese Hypothese lässt sich insbesondere im Santa Barbara System und den Sierras Pampeanas anwenden, da geologische Studien bereits die sukzessive Reaktivierung von Strukturen über einen längeren Zeitraum identifizierten. Insbesondere für das Santa Barbara System zeigen die hier vorgestellten Ergebnisse, dass beide Faktoren, mafische Gesteinsanteile und die Reduzierung des Reibungswiderstandes, nötig sind, um das Auftreten der zu beobachtenden größeren Erdbebentiefe zu erklären. KW - Andes KW - Argentina KW - density modeling KW - thermal field KW - rheology KW - deformation KW - Anden KW - Argentinien KW - Dichtemodellierung KW - thermisches Feld KW - Rheologie KW - Deformation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-506226 ER - TY - THES A1 - Kooten, Willemijn Sarah Maria Theresia van T1 - Structural inheritance of the Salta Rift basin and its control on exhumation patterns of the Eastern Cordillera between 23 and 24°S T1 - Strukturelle Vererbung des Salta Riftbeckens und deren Einfluss auf die Heraushebungsmuster der Östlichen Kordillere zwischen 23 und 24°S N2 - The deformation style of mountain belts is greatly influenced by the upper plate architecture created during preceding deformation phases. The Mesozoic Salta Rift extensional phase has created a dominant structural and lithological framework that controls Cenozoic deformation and exhumation patterns in the Central Andes. Studying the nature of these pre-existing anisotropies is a key to understanding the spatiotemporal distribution of exhumation and its controlling factors. The Eastern Cordillera in particular, has a structural grain that is in part controlled by Salta Rift structures and their orientation relative to Andean shortening. As a result, there are areas in which Andean deformation prevails and areas where the influence of the Salta Rift is the main control on deformation patterns. Between 23 and 24°S, lithological and structural heterogeneities imposed by the Lomas de Olmedo sub-basin (Salta Rift basin) affect the development of the Eastern Cordillera fold-and-thrust belt. The inverted northern margin of the sub-basin now forms the southern boundary of the intermontane Cianzo basin. The former western margin of the sub-basin is located at the confluence of the Subandean Zone, the Santa Barbara System and the Eastern Cordillera. Here, the Salta Rift basin architecture is responsible for the distribution of these morphotectonic provinces. In this study we use a multi-method approach consisting of low-temperature (U-Th-Sm)/He and apatite fission track thermochronology, detrital geochronology, structural and sedimentological analyses to investigate the Mesozoic structural inheritance of the Lomas de Olmedo sub-basin and Cenozoic exhumation patterns. Characterization of the extension-related Tacurú Group as an intermediate succession between Paleozoic basement and the syn-rift infill of the Lomas de Olmedo sub-basin reveals a Jurassic maximum depositional age. Zircon (U-Th-Sm)/He cooling ages record a pre-Cretaceous onset of exhumation for the rift shoulders in the northern part of the sub-basin, whereas the western shoulder shows a more recent onset (140–115 Ma). Variations in the sedimentary thickness of syn- and post-rift strata document the evolution of accommodation space in the sub-basin. While the thickness of syn-rift strata increases rapidly toward the northern basin margin, the post-rift strata thickness decreases toward the margin and forms a condensed section on the rift shoulder. Inversion of Salta Rift structures commenced between the late Oligocene and Miocene (24–15 Ma) in the ranges surrounding the Cianzo basin. The eastern and western limbs of the Cianzo syncline, located in the hanging wall of the basin-bounding Hornocal fault, show diachronous exhumation. At the same time, western fault blocks of Tilcara Range, south of the Cianzo basin, began exhuming in the late Oligocene to early Miocene (26–16 Ma). Eastward propagation to the frontal thrust and to the Paleozoic strata east of the Tilcara Range occurred in the middle Miocene (22–10 Ma) and the late Miocene–early Pliocene (10–4 Ma), respectively. N2 - Der Deformationsstil von Gebirgsgürteln wird stark von der Architektur der oberen Platte beeinflusst, die während vorheriger Verformungsphasen entstanden ist. Die mesozoische Salta Rift Extensionsphase hat einen strukturellen und lithologischen Rahmen geschaffen, der die känozoischen Heraushebungsmuster in den Zentralanden kontrolliert. Die Charakterisierung dieser Anisotropien ist daher entscheidend, um die räumlich-zeitliche Verteilung der Heraushebung und ihrer kontrollierenden Faktoren zu verstehen. Insbesondere die Östliche Kordillere weist einen strukturellen Rahmen auf, der teilweise von Salta Rift-Strukturen und ihrer Orientierung in Bezug auf die Verkürzung im Zuge der Gebirgsbildung der Anden kontrolliert wird. Dadurch wurden Gebiete geschaffen, in denen die jüngere Anden-Deformation überwiegt, und Gebiete, in denen der Einfluss des Salta Rifts die Deformationsmuster prägt. Zwischen 23 und 24°S beeinflussen lithologische und strukturelle Heterogenitäten des Lomas de Olmedo Beckens (Teil des Salta Rift Beckens) die Entwicklung des Faltengürtels der Östlichen Kordillere. Der invertierte nördliche Rand des Beckens bildet dabei die südliche Grenze des Cianzo Beckens, welches während der andinen Orogenese angelegt wurde. Der ehemalige westliche Rand des Lomas de Olmedo Beckens befindet sich am Übergang der Subandinen Zone, des Santa Barbara Systems und der Östlichen Kordillere. Hier ist die Architektur des Salta Rift-Beckens für die räumliche Verteilung dieser morphotektonischen Provinzen verantwortlich. In dieser Studie verwenden wir einen multi-methodischen Ansatz, bestehend aus Niedertemperatur (U-Th-Sm)/He und Apatit Spaltspur Thermochronologie, detritische Geochronologie sowie strukturelle und sedimentologische Analyse, um das mesozoische strukturelle Erbe des Lomas de Olmedo Beckens und die känozoischen Heraushebungsmuster zu untersuchen. Die mit Extension verbundene Tacurú-Gruppe bildet eine Einheit, die dem paläozoischen Grundgebirge und der syn-rift Auffüllung des Lomas de Olmedo Beckens zwischengeschaltet ist. Sie hat ein Jurassisches maximales Ablagerungsalter. Zirkon (U-Th-Sm)/He Abkühlungsalter zeigen einen präkretazischen Beginn der Heraushebung für die Riftschulter im nördlichen Teil des Beckens, während die westliche Schulter einen jüngeren Beginn aufweist (140–115 Ma). Variationen in der stratigraphischen Mächtigkeit von Syn- und Postrift-Gesteinen dokumentieren die Entwicklung des Akommodationsraums. Während die Mächtigkeit der Synrift-Gesteine zum nördlichen Beckenrand hin zunimmt, schwindet die Mächtigkeit der Postrift-Gesteine in Richtung des Beckenrandes und bildet dort eine kondensierte Abfolge. Die Inversion der Salta Rift Strukturen begann im Cianzo Becken zwischen dem späten Oligozän und Miozän (24–15 Ma) mit einer diachronen Heraushebung des östlichen und westlichen Schenkels der Cianzo Synklinale, welche sich im Hangenden der Hornocal Störung befindet. Gleichzeitig begann im Tilcara Gebirge, südlich des Cianzo Beckens, im späten Oligozän bis frühen Miozän (26–16 Ma) die Heraushebung westlicher Störungsblöcke. Die ostwärtige Ausbreitung zur frontalen Überschiebung erfolgte im mittleren Miozän (22–10 Ma) und zum San Lucas Block im späten Miozän bis frühen Pliozän (10–4 Ma). KW - Argentina KW - Argentinien KW - thermochronology KW - Thermochronologie KW - exhumation KW - structural inheritance KW - thermal modeling KW - Eastern Cordillera KW - östliche Kordillere KW - Modellierung KW - Salta Rift KW - Salta Rift Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-617983 ER - TY - THES A1 - Zeckra, Martin T1 - Seismological and seismotectonic analysis of the northwestern Argentine Central Andean foreland N2 - After a severe M W 5.7 earthquake on October 17, 2015 in El Galpón in the province of Salta NW Argentina, I installed a local seismological network around the estimated epicenter. The network covered an area characterized by inherited Cretaceous normal faults and neotectonic faults with unknown recurrence intervals, some of which may have been reactivated normal faults. The 13 three-component seismic stations recorded data continuously for 15 months. The 2015 earthquake took place in the Santa Bárbara System of the Andean foreland, at about 17km depth. This region is the easternmost morphostructural region of the central Andes. As a part of the broken foreland, it is bounded to the north by the Subandes fold-and-thrust belt and the Sierras Pampeanas to the south; to the east lies the Chaco-Paraná basin. A multi-stage morphotectonic evolution with thick-skinned basement uplift and coeval thin-skinned deformation in the intermontane basins is suggested for the study area. The release of stresses associated with the foreland deformation can result in strong earthquakes, as the study area is known for recurrent and historical, destructive earthquakes. The available continuous record reaches back in time, when the strongest event in 1692 (magnitude 7 or intensity IX) destroyed the city of Esteco. Destructive earthquakes and surface deformation are thus a hallmark of this part of the Andean foreland. With state-of-the-art Python packages (e.g. pyrocko, ObsPy), a semi-automatic approach is followed to analyze the collected continuous data of the seismological network. The resulting 1435 hypocenter locations consist of three different groups: 1.) local crustal earthquakes (nearly half of the events belong to this group), 2.) interplate activity, of regional distance in the slab of the Nazca-plate, and 3.) very deep earthquakes at about 600km depth. My major interest focused on the first event class. Those crustal events are partly aftershock events of the El Galpón earthquake and a second earthquake, in the south of the same fault. Further events can be considered as background seismicity of other faults within the study area. Strikingly, the seismogenic zone encompass the whole crust and propagates brittle deformation down, close to the Moho. From the collected seismological data, a local seismic velocity model is estimated, using VELEST. After the execution of various stability tests, the robust minimum 1D-velocity model implies guiding values for the composition of the local, subsurface structure of the crust. Afterwards, performing a hypocenter relocation enables the assignment of individual earthquakes to aftershock clusters or extended seismotectonic structures. This allows the mapping of previously unknown seismogenic faults. Finally, focal mechanisms are modeled for events with acurately located hypocenters, using the newly derived local velocity model. A compressive regime is attested by the majority of focal mechanisms, while the strike direction of the individual seismogenic structures is in agreement with the overall north – south orientation of the Central Andes, its mountain front, and individual mountain ranges in the southern Santa-Bárbara-System. N2 - Nach einem schweren Erdbeben der Magnitude M W 5.7 am 17. Oktober 2015 in El Galpón, in der Provinz Salta im Nordwesten Argentiniens, habe ich ein lokales seismologisches Netzwerk, um das vermutete Epizentrum herum, aufgebaut. Dabei haben 13 Stationen kontinuierlich für 15 Monate gemessen. Das Netzwerk wurde in einem Gebiet installiert, welches durch tektonische Störungen charakterisiert ist, die entweder in der Kreidezeit zunächst als Abschiebungen initiiert und später als Aufschiebungen reaktiviert wurden oder in der geologischen jüngeren Vergangenheit erst entstanden sind. Die Intervallzeiten zwischen zwei Erdbeben sind dabei häufig unbekannt. Das Erdbeben von 2015 trat im Santa-Barbara-System im Argentinischen Vorland, 17 km unter der Erdoberfläche auf. Diese Region ist die östlichste strukturgeologische Provinz der Zentralanden und dem broken-foreland-Typus zuzuordnen. Im Norden schließt sich der Bolivianische Faltengürtel (Sierras Subandinas) und im Süden die Sierras Pampeanas an; im Osten liegt das Chaco-Paraná Becken. Eine mehrstufige morphotektonische Entwicklung wird hier vermutet, bei der das Grundgebirge durch als thick-skinned bezeichnete Deformation herausgehoben wurde und die dazwischen liegenden Intermontanbecken gleichzeitig Deformation des Typs thin-skinned erfahren haben. Die plötzliche Spannungsfreisetzung, die mit dieser Vorlanddeformation einhergeht, kann zu starken Erdbeben führen. Das Untersuchungsgebiet ist für wiederkehrende und historische, zerstörerische Erdbeben bekannt. Der zur Verfügung stehenden Aufzeichnungen reichen bis in das Jahr 1692 zurück, als ein Erdbeben der Magnitude M 7 (oder Intensität IX) die Stadt Esteco zerstörte. Daher sind zerstörerische Erdbeben ein besonderes Kennzeichen in diesem Teil des Andenvorlands. Für die Analyse der im seismologischen Netzwerk aufgezeichneten kontinuierlichen Daten wurde ein semiautomatischer Ansatz verfolgt, der mittels hochmoderner Python-Bibliotheken informationstechnisch umgesetzt wurde. Die resultierenden 1435 Erdbeben bestehen aus drei verschiedenen Gruppen: 1.) lokale Erdbeben in der Erdkruste (die etwa die Hälfte aller Events ausmachen), 2.) weiter entfernte Interplattenaktivität, die durch die Subduktion der Nazca-Platte unter den Südamerikanischen Kontinent hervorgerufen wird und 3.) sehr tiefen Erdbeben in etwa 600 km Tiefe. Mein Hauptaugenmerk lag dabei auf der ersten Gruppe. Diese krustalen Ereignisse sind teilweise Nachbeben des El Galpón Erdbebens und eines weiteren Bebens, welches sich weiter im Süden an der gleichen Störung ereignete. Die restlichen Beben können der allgemeinen Hintergrundaktivität entlang weiterer Störungen im Untersuchungsgebiet zugeschrieben werden. Beachtenswert ist dabei der Umstand, dass die Erdbebenaktivität in der gesamten Kruste beobachtet werden kann und sich dadurch die Deformation bis a fast an den Erdmantel ausbreitet. Mit den gesammelten Daten kann, unter der Verwendung der VELEST Software, ein lokales seismisches Geschwindigkeitsmodell bestimmt werden. Nach der Durchführung verschiedener Stabilitätstests, können aus dem robusten eindimensionalen Modell Richtwerte für die Zusammensetzung und den Aufbau der Erdkruste gewonnen werden. Dieanschließende Relokalisierung von Erdbebenherden erlaubt die Zuordnung einzelner Erdbeben zu Erdbebenclustern oder ausgedehnten seismotektonischen Strukturen. Dadurch können sogar zuvor unbekannte seismogene Störungen kartiert werden. Schlussendlich, werden Herdflächenlösungen für Beben mit präzise lokalisierten Erdbebenherden und unter der Einbeziehung des neu bestimmten lokalen Geschwindigkeitsmodells modelliert. Der Großteil der resultierenden Lösungen bestätigt das vorherrschende kompressive Regime. Das Streichen der einzelnen seismogenen Strukturen stimmt größtenteils mit der allgemeinen Nord – Süd Ausrichtugn der Zentralanden, ihrer Gebirgsfront und den einzelnen Höhenzügen im Santa-Barbará-System überein. T2 - Seismologische und Seismotektonische Analyse des Vorlandsystems der nordwestargentinischen Zentralanden KW - Seismology KW - Seismotektonik KW - Geophysics KW - Andes KW - Geosciences KW - Argentina KW - Anden KW - Seismologie KW - Geophysik KW - Geowissenschaften KW - Argentinien Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473240 ER - TY - THES A1 - Ruiz-Monroy, Ricardo T1 - Organic geochemical characterization of the Yacoraite Formation (NW-Argentina)-paleoenvironment and petroleum potential T1 - Organische geochemische Charakterisierung der Yacoraite-Formation (NW-Argentinien) – Paläoumgebung und Erdölpotenzial T1 - Caracterización geoquímica orgánica de la Formación Yacoraite (NO-Argentina) -paleoambiente y potencial petrolero N2 - This dissertation was carried out as part of the international and interdisciplinary graduate school StRATEGy. This group has set itself the goal of investigating geological processes that take place on different temporal and spatial scales and have shaped the southern central Andes. This study focuses on claystones and carbonates of the Yacoraite Fm. that were deposited between Maastricht and Dan in the Cretaceous Salta Rift Basin. The former rift basin is located in northwest Argentina and is divided into the sub-basins Tres Cruces, Metán-Alemanía and Lomas de Olmedo. The overall motivation for this study was to gain new knowledge about the evolution of marine and lacustrine conditions during the Yacoraite Fm. Deposit in the Tres Cruces and Metán-Alemanía sub-basins. Other important aspects that were examined within the scope of this dissertation are the conversion of organic matter from Yacoraite Fm. into oil and its genetic relationship to selected oils produced and natural oil spills. The results of my study show that the Yacoraite Fm. began to be deposited under marine conditions and that a lacustrine environment developed by the end of the deposition in the Tres Cruces and Metán-Alemanía Basins. In general, the kerogen of Yacoraite Fm. consists mainly of the kerogen types II, III and II / III mixtures. Kerogen type III is mainly found in samples from the Yacoraite Fm., whose TOC values are low. Due to the adsorption of hydrocarbons on the mineral surfaces (mineral matrix effect), the content of type III kerogen with Rock-Eval pyrolysis in these samples could be overestimated. Investigations using organic petrography show that the organic particles of Yacoraite Fm. mainly consist of alginites and some vitrinite-like particles. The pyrolysis GC of the rock samples showed that the Yacoraite Fm. generates low-sulfur oils with a predominantly low-wax, paraffinic-naphthenic-aromatic composition and paraffinic wax-rich oils. Small proportions of paraffinic, low-wax oils and a gas condensate-generating facies are also predicted. Here, too, mineral matrix effects were taken into account, which can lead to a quantitative overestimation of the gas-forming character. The results of an additional 1D tank modeling carried out show that the beginning (10% TR) of the oil genesis took place between ≈10 Ma and ≈4 Ma. Most of the oil (from ≈50% to 65%) was generated prior to the development of structural traps formed during the Plio-Pleistocene Diaguita deformation phase. Only ≈10% of the total oil generated was formed and potentially trapped after the formation of structural traps. Important factors in the risk assessment of this petroleum system, which can determine the small amounts of generated and migrated oil, are the generally low TOC contents and the variable thickness of the Yacoraite Fm. Additional risks are associated with a low density of information about potentially existing reservoir structures and the quality of the overburden. N2 - Diese Dissertation wurde im Rahmen des internationalen und interdisziplinären Graduiertenkollegs StRATEGy durchgeführt. Diese Gruppe hat sich zum Ziel gesetzt, geologische Prozesse zu untersuchen, die auf unterschiedlichen zeitlichen und räumlichen Skalen ablaufen und die südlichen Zentralanden geprägt haben. Diese Studie konzentriert sich auf die Tonsteine und Karbonate der Yacoraite Fm., die zwischen Maastricht und Dan im kreidezeitlichen Salta-Grabenbecken abgelagert wurden. Das ehemalige Riftbecken liegt im Nordwesten Argentiniens und gliedert sich in die Teilbecken Tres Cruces, Metán-Alemanía und Lomas de Olmedo. Die übergreifende Motivation für diese Studie war es, neue Erkenntnisse über die Entwicklung der marinen und lakustrinen Bedingungen während der Ablagerung der Yacoraite Fm. in den Tres Cruces und Metán-Alemanía Sub-Becken zu gewinnen. Weitere wichtige Aspekte, die im Rahmen dieser Dissertation untersucht wurden, sind die Umwandlung von organischer Materie der Yacoraite Fm. in Öl sowie deren genetische Beziehung zu ausgewählten produzierten Ölen und natürlichen Ölaustritten. Die Ergebnisse meiner Studie zeigen, dass die Ablagerung der Yacoraite Fm. unter marinen Bedingungen begann und sich bis zum Ende der Ablagerung in den Tres Cruces- und Metán-Alemanía-Becken ein lakustrines Milieu entwickelte. Im Allgemeinen besteht das Kerogen der Yacoraite Fm. überwiegend aus den Kerogentypen II, III und II/III-Mischungen. Der Kerogentyp III findet sich vor allem in Proben aus der Yacoraite Fm., deren TOC-Werte niedrig sind. Aufgrund der Adsorption von Kohlenwasserstoffen an den Mineraloberflächen (Mineralmatrixeffekt) könnte der Gehalt an Typ-III-Kerogen mit der Rock-Eval-Pyrolyse in diesen Proben überschätzt werden. Untersuchungen mittels organischer Petrographie zeigen, dass die organischen Partikel der Yacoraite Fm. hauptsächlich aus Alginiten und einigen Vitrinit-artigen Partikeln bestehen. Die Pyrolyse-GC der Gesteinsproben zeigte, dass die Yacoraite Fm. schwefelarme Öle mit einer überwiegend Wachs-armen paraffinisch-naphthenisch-aromatischen Zusammensetzung und paraffinische Wachs-reiche Öle generiert. Geringe Anteile paraffinischer, Wachs-armer Öle und einer Gaskondensat-generierenden Fazies werden ebenfalls vorausgesagt. Auch hier wurden Mineralmatrixeffekte berücksichtigt, die zu einer quantitativen Überschätzung des gasbildenden Charakters führen können. Die Ergebnisse einer zusätzlich durchgeführten 1D-Beckenmodellierung zeigen, dass der Beginn (10 %TR) der Ölgenese zwischen ≈10 Ma und ≈4 Ma stattfand. Der größte Teil des Öls (von ≈50 % bis 65 %) wurde vor der Entwicklung struktureller Fallen gebildet, die während der plio-pleistozänen Diaguita Deformatiosphase gebildet wurden. Nur ≈10 % des insgesamt generierten Öls wurde nach der Entstehung struktureller Fallen gebildet und potentiell darin gefangen. Wichtige Faktoren in der Risikobewertung dieses Erdölsystems, welche die geringen Mengen an generiertem und migriertem Öl bestimmen können, stellen die allgemein niedrigen TOC-Gehalte und die variable Mächtigkeit der Yacoraite Fm. dar. Weitere Risiken sind mit einer niedrigen Informationsdichte über potentiell vorhandene Reservoirstrukturen und die Qualität der Deckgesteine verbunden. N2 - This dissertation was carried out within the framework of the international and interdisciplinary research training group StRATEGy whose aim is to study geological processes occurring at different times and spatial scales that have shaped the southern Central Andes. The study focuses on the shales and carbonates of the Yacoraite Fm. deposited in the Salta rift basin (NW Argentina) during the Maastrichtian to Danian, and is divided into the Tres Cruces, Metán-Alemanía, and Lomas de Olmedo sub-basins. The Yacoraite Fm. is considered the potential source rock for most oil fields in NW Argentina. The overall motivation for this research was to provide new insights into the occurrence of marine and lacustrine settings during the deposition of the Yacoraite Fm. in the Tres Cruces and Metán-Alemanía sub-basins. Other important aspects assessed in this research are the likely transformation of organic matter of the Yacoraite Fm. into oil as well as its genetic relation to selected produced oils and natural oil seep samples. Fifty-two outcropping samples from the Yacoraite Fm. collected in the Tres Cruces and Metán-Alemanía sub-basins, seven oil seep samples from the Tres Cruces and Lomas de Olmedo sub-basins and eight produced oils from the latter sub-basin were evaluated. Characterization of the depositional environment and kerogen types of the Yacoraite Fm. was performed using various geochemical analyses encompassing pyrolysis, chromatography, spectrometry and petrography. Minerals were analyzed by X-ray diffraction. The elemental composition of rock samples was determined by X-ray fluorescence and more precise quantification was done by ICP-MS analysis. The study of the hydrocarbon potential of the Yacoraite Fm. was addressed by the following analyses of its organic matter and modeling procedures: • The assessment of the amount, quality, and thermal maturity of the organic matter; • Measurement of the rate of thermal cracking (bulk kinetics) of the organic matter into oil; • The extrapolation of high heating rate kinetics to low heating rates at geological conditions using the first-order kinetic approach provided by the Arrhenius equation; • The prediction of the composition (compositional kinetics) and the phase behavior of its first-formed petroleum; • The specific activation energy distribution of the bulk kinetics of representative samples collected in the Tres Cruces sub-basin were used in the 1D-basin modeling, enabling a comparison between the timing of oil generation and the timing of the formation of structural traps. Subsequently, the implications of these variables on the accumulation of oil in the Tres Cruces sub-basin were assessed. The characterization of produced oils and oil seep samples was carried out by chromatographic and spectrometric techniques. Genetic relationships (source rock-oil correlation) of the oil seep samples in the Tres Cruces sub-basin was studied by comparing their compositional affinities to rock extracts from outcropping samples of the Yacoraite Fm. in the same sub-basin. Since no rock samples were available from the Lomas de Olmedo sub-basin, the source-rock correlation for the oil seep samples and the produced oils assume that the Yacoraite Fm. in this sub-basin has similar organofacies as in the Tres Cruces and Metán-Alemanía sub-basins. The results of this research indicate that the deposition of the Yacoraite Fm. began in marine environments. Lacustrine settings developed during the middle part and predominated towards the end of the deposition in the Tres Cruces and Metán-Alemanía sub-basins. In general, the kerogen of the Yacoraite Fm. is predominantly composed of Type II, II/III, and Type III kerogens. The latter is largely found in samples from the Yacoraite Fm. whose TOC values were low. In these samples, the content of Type III kerogen could be overestimated with Rock-Eval pyrolysis due to hydrocarbon adsorption on mineral surfaces (mineral-matrix effect). Organic petrography showed that the organic particles of the Yacoraite Fm. correspond mainly to alginites and some vitrinite-like particles. Pyrolysis-GC of whole-rock samples indicated that the Yacoraite Fm. generates low sulphur oils with a mainly Paraffinic-Naphthenic-Aromatic Low Wax composition and Paraffinic High Wax oils. Minor contributions of Paraffinic Low Wax Oil and Gas condensate-generating facies are also predicted. Mineral-matrix effects can lead to an overestimation of the gas-prone character and were considered. Extrapolation of bulk kinetics experiments to a geological heating rate of 3 K/Myr reveals that the oil generation from the Yacoraite Fm. in the Tres Cruces sub-basin occurs in a range of approximately 60 °C. The onset (10%TR) of oil generation occurs at geological temperatures from 108 °C to 132 °C. The complete transformation of the organic matter into oil (90%TR) is reached at temperatures between 142 °C and 169 °C. The gas exsolution from the oil occurs at pressures below 200 bar as predicted from PVT-compatible compositional kinetics with subsequent separation of two phases and the increase in liquid viscosity at depths <1.8 km. The analysis of outcrop samples of the Yacoraite Fm. collected in the Metán-Alemanía and Tres Cruces sub-basins document that their maturity is at least at the onset of oil generation. The formation is more mature in the deeper buried centers of the basins being in the main oil window, as indicated by the presence of genetically related oil seep samples and supported by predictions of thermal modeling. The results of 1D-basin modeling indicate that the onset (10%TR) of oil generation occurred between ≈10 Ma and ≈4 Ma. Most of the oil (from ≈50% to 65%) was generated before the structural traps associated with the Diaguita tectonic phase (c.a. 2.5 Ma) formed. The amount of oil generated after the formation of structural traps and potentially accumulated in them accounts for ≈10%. The petroleum system risk assessment identifies the generally low TOC content and variable thickness of Yacoraite Fm. as important factors that may determine the low volumes of generated and migrated oil. Additional risks are associated with the lack of information regarding the existence of reservoirs and the quality of the seals. Oil-source rock correlations based on depositional-, age- and maturity-related biomarkers show that the oil samples of the Caimancito oil field and from Well-10 of the Martinez del Tineo oil field were generated from the Yacoraite Fm., while partial correlations are determined between this formation and the oil samples from Well-18 and Chirete x100-1. The oil samples from well-11 and Río Pescado show no correlation and were sourced from a different rock. According to the project partners, it is most likely the Devonian Los Monos Fm. The oil-oil correlations reflect the source oil-source rock correlations mentioned above and were supported by the ratios of light hydrocarbons using the classical approach of Halpern (1995). The Río Pescado and well-11 oil samples lack most of the biomarkers, which distinguishes them from the rest of the oils. The sample from well-11 was found to be a mixture of oils of varying thermal maturity. The least mature oil in this mixture contains stigmastane and correlates with the oil sample from the Caimancito-21 well. The most mature sample is characterized by higher concentrations of diamantanes and adamantanes. An anomalously high uranium content was measured in one sample at the base of the Yacoraite Fm. in the west sector of the Metán-Alemanía sub-basin. High radiation doses appear to be the cause for the very low hydrocarbon generation during Rock-Eval pyrolysis. The sample is composed mainly of alginites with minor amounts of terrigenous material and plots in the field of Type IV kerogen in a pseudo-Van Krevelen diagram. Since radiation induces aromatization in the kerogen structure, it potentially mimics higher thermal maturity as determined by vitrinite reflectance. The higher Tmax is caused by the high adsorption of hydrocarbons on the highly-aromatized kerogen and the contribution of hydrocarbons adsorption on mineral surfaces. The lack of biomarkers in the solvent-extracted portion (bitumen) of the same highly-irradiated sample prevents the characterization of kerogen type and the depositional environment. However, unlike Py-GC results for kerogen, GC-FID analysis on extracted bitumen still shows n-alkanes, pristane, and phytane. This may not only indicate a different response of bitumen and kerogen to radiation, at least in the magnitude, but also offers an alternative for kerogen typing in samples where the kerogen is highly affected by radiation which makes its classification unreliable. In this example, the ratios of pristane/n-C17 and phytane/n-C18 in bitumen indicate that a Type II/III kerogen composes this sample, which is consistent with the presence of alginite as the main organic component and some vitrinite-like particles. In conclusion, molecular geochemical analyses have documented the presence of gammacerane in extracts of the Yacoraite Fm. which indicate the development of hypersaline conditions as well as the changing depositional environment of the Yacoraite Fm. from marine towards lacustrine settings. The variability of organofacies of this formation in the Tres Cruces and Metán-Alemanía sub-basins is a consequence of the changes in the depositional environment. Future work may provide insights into the evolution of paleosalinity during Yacoraite Fm. deposition by using specific proxies e.g., methyltrimethyltridecylchromans. Future research may include characterizing the NSO fraction of these oils as well as elucidating possible fractionation during expulsion, migration, and accumulation. A regional study is needed to clarify the uncertainties associated with the existence of the reservoir, the quality of the seals and to improve the data-input for thermal modeling for the Tres Cruces sub-basin. Studies that aim to increase the database of the concentration of methyldiamantanes (3- + 4-) and methyladamantanes (1- + 2-) in produced oils will provide a threshold for the assessment of oil cracking. Further research is aimed at helping to understand how the distribution of uranium can affect the different responses of bitumen and kerogen to radiation. KW - Yacoraite Formation KW - Argentina KW - Caimancito oil field KW - Salta basin KW - Cretaceous basin KW - Martinez del Tineo KW - Chirete KW - Ramos X-11 KW - Río Pescado KW - radiolysis KW - kerogen kinetics KW - PhaseKinetics KW - radiation and chemical properties KW - oil seeps KW - organofacies KW - organofacies KW - mineral matrix KW - age-related biomarkers KW - maturity-related biomarkers KW - biodegradation KW - Diaguita KW - Argentinien KW - Caimancito-Ölfeld KW - Chirete KW - Kreidebecken KW - Diaguita KW - Martinez del Tineo KW - Phasenkinetik KW - Ramos X-11 KW - Río Pescado KW - Salta-Becken KW - Yacoraite Formation KW - biologischer Abbau KW - Kerogenkinetik KW - Reifegradbezogene Biomarker KW - mineralische Matrix KW - natürlichen Ölaustritten KW - Organofazies KW - radiolyse KW - Strahlung und chemische Eigenschaften KW - Argentina KW - Campo petrolero Caimancito KW - Chirete KW - Cuenca Cretácica KW - Diaguita KW - Martinez del Tineo KW - Cinética de fases KW - Formación Yacoraite KW - biomarcadores diagnósticos de edad KW - biodegradación KW - Cinética del querógeno KW - biomarcadores diagnósticos de madurez KW - matríz mineral KW - manaderos de petróleo KW - radiólisis KW - radiación y propiedades químicas Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-518697 ER - TY - THES A1 - Pingel, Heiko T1 - Mountain-range uplift & climate-system interactions in the Southern Central Andes T1 - Wechselwirkungen zwischen Gebirgsbildung und Klima in den südlichen Zentralanden N2 - Zwei häufig diskutierte Aspekte der spätkänozoischen Gebirgsbildung der Anden sind der Zeitpunkt sowie die Art und Weise der Heraushebung des Puna-Plateaus und seiner Randgebiete innerhalb der Ostkordillere und die damit verbundenen klimatischen Änderungen in NW Argentinien. Die Ostkordillere trennt die Bereiche des endorheischen, ariden Plateaus von semiariden und extern entwässerten intermontanen Becken sowie dem humiden Andenvorland im Osten. Diese Unterschiede verdeutlichen die Bedeutung der östlichen Flanken der Anden als orografische Barrieren gegenüber feuchten Luftmassen aus dem Osten und spiegelt sich auch in ausgeprägten Relief- und Topografiegradienten, der Niederschlagsverteilung, und der Effizienz von Oberflächenprozessen wider. Obwohl das übergeordnete Deformationsmuster in diesem Teil der Anden eine ostwärts gerichtete Wanderung der Deformationsprozesse im Gebirge indiziert, gibt es hier keine klar definierte Deformationsfront. Hebungsvorgänge und die damit im Zusammenhang stehenden Sedimentprozesse setzen räumlich und zeitlich sehr unterschiedlich ein. Zudem gestalten periodisch wiederkehrende Deformationsereignisse innerhalb intermontaner Becken und diachrone Hebungsvorgänge, durch Reaktivierung älterer Sockelstrukturen im Vorland, eine detaillierte Auswertung der räumlich-zeitlichen Hebungsmuster zusätzlich schwierig. Die vorliegende Arbeit konzentriert sich hauptsächlich auf die tektonische Entwicklung der Ostkordillere im Nordwesten Argentiniens, die Ablagerungsgeschichte ihrer intermontanen Sedimentbecken und die topografische Entwicklung der Ostflanke des andinen Puna-Plateaus. Im Allgemeinen sind sich die Sedimentbecken der Ostkordillere und der angrenzenden Provinzen, den Sierras Pampeanas und der Santa Bárbara Region, den durch Störungen begrenzten und mit Sedimenten verfüllten Becken der hochandinen Plateauregion sehr ähnlich. Deutliche Unterschiede zur Puna bestehen aber dennoch, denn wiederholte Deformations-, Erosions- und Sedimentationsprozesse haben in den intermontanen Becken zu einer vielfältigen Stratigrafie, Überlagerungsprozessen und einer durch tektonische Prozesse und klimatischen Wandel charakterisierten Landschaft beigetragen. Je nach Erhaltungsgrad können in einigen Fällen Spuren dieser sedimentären und tektonischen Entwicklung bis in die Zeit zurückreichen, als diese Bereiche des Gebirges noch Teil eines zusammenhängenden und unverformten Vorlandbeckens waren. Im Nordwesten Argentiniens enthalten känozoische Sedimente zahlreiche datierbare und geochemisch korrelierbare Vulkanaschen, die nicht nur als wichtige Leithorizonte zur Entschlüsselung tektonischer und sedimentärer Ereignisse dienen. Die vulkanischen Gläser dieser Aschen archivieren außerdem Wasserstoff-Isotopenverhältnisse früherer Oberflächenwasser, mit deren Hilfe - im Vergleich mit den Isotopenverhältnissen rezenter meteorischer Wässer - die räumliche und zeitliche Entstehung orografischer Barrieren und tektonisch erzwungene Klima- und Umweltveränderungen verfolgt werden können. Uran-Blei-Datierungen an Zirkonen aus den vulkanischen Aschelagen und die Rekonstruktion sedimentärer Paläotransportrichtungen im intermontanen Humahuaca-Becken in der Ostkordillere (23.5° S) deuten an, dass das heutige Becken bis vor etwa 4.2 Ma Bestandteil eines größtenteils uneingeschränkten Ablagerungsbereichs war, der sich bis ins Vorland erstreckt haben muss. Deformation und Hebung östlich des heutigen Beckens sorgten dabei für eine fortschreitende Entkopplung des Entwässerungsnetzes vom Vorland und eine Umlenkung der Flussläufe nach Süden. In der Folge erzwang die weitere Hebung der Gebirgsblöcke das Abregnen östlicher Luftmassen in immer östlicher gelegene Bereiche. Zudem können periodische Schwankungen der hydrologischen Verbindung des Beckens mit dem Vorland im Zusammenhang mit der Ablagerung und Erosion mächtiger Beckenfüllungen identifiziert werden. Systematische Beziehungen zwischen Verwerfungen, regionalen Diskontinuitäten und verstellten Terrassenflächen verweisen außerdem auf ein generelles Muster beckeninterner Deformation, vermutlich als Folge umfangreicher Beckenerosion und damit verbundenen Änderungen im tektonischen Spannungsfeld der Region. Einige dieser Beobachtungen können anhand veränderter Wasserstoff-Isotopenkonzentrationen vulkanischer Gläser aus der känozoischen Stratigrafie untermauert werden. Die δDg-Werte zeigen zwei wesentliche Trends, die einerseits in Verbindung mit Oberflächenhebung innerhalb des Einzugsgebiets zwischen 6.0 und 3.5 Ma stehen und andererseits mit dem Einsetzen semiarider Bedingungen durch Erreichen eines Schwellenwertes der Topografie der östlich gelegenen Gebirgszüge nach 3.5 Ma erklärt werden können. Tektonisch bedingte Unterbrechung der Sedimentzufuhr aus westlich gelegenen Liefergebieten um 4.2 Ma und die folgende Hinterland-Aridifizierung deuten weiterhin auf die Möglichkeit hin, dass diese Prozesse die Folge eines lateralen Wachstums des Puna-Plateaus sind. Diese Aridifizierung im Bereich der Puna resultierte in einem ineffizienten, endorheischen Entwässerungssystem, das dazu beigetragen hat, das Plateau vor Einschneidung und externer Entwässerung zu bewahren und Reliefgegensätze aufgrund fortgesetzter Beckensedimentation reduzierte. Die diachrone Natur der Hebungen und Beckenbildungen sowie deren Auswirkungen auf das Flusssystem im angrenzenden Vorland wird sowohl durch detaillierte Analysen der Sedimentherkunft und Transportrichtungen als auch Uran-Blei-Datierungen im Lerma- und Metán-Becken (25° S) weiterhin unterstrichen. Das wird besonders deutlich am Beispiel der isolierten Hebung der Sierra de Metán vor etwa 10 Ma, die mehr als 50 km von der aktiven orogenen Front im Westen entfernt liegt. Ab 5 Ma sind typische Lithologien der Puna nicht mehr in den Vorlandsedimenten nachweisbar, welches die weitere Hebung innerhalb der Ostkordillere und die hydrologische Isolation des Angastaco-Beckens in dieser Region dokumentiert. Im Spätpliozän und Quartär ist die Deformation letztlich über das gesamte Vorland verteilt und bis heute aktiv. Um die Beziehungen zwischen tektonisch kontrollierten Veränderungen der Topografie und deren Einfluss auf atmosphärische Prozesse besser zu verstehen, werden in dieser Arbeit weitere altersspezifische Wasserstoff-Isotopendaten vulkanischer Gläser aus dem zerbrochenen Vorland, dem Angastaco-Becken in der Übergangsregion zwischen Ostkordillere und Punarand und anderer intermontaner Becken weiter südlich vorgestellt. Die Resultate dokumentieren ähnliche Höhenlagen der untersuchten Regionen bis ca. 7 Ma, gefolgt von Hebungsprozessen im Bereich des Angastaco-Beckens. Ein Vergleich mit Isotopendaten vom benachbarten Puna-Plateau hilft abrupte δDg-Schwankungen in den intermontanen Daten zu erklären und untermauert die Existenz wiederkehrender Phasen verstärkt konvektiver Wetterlagen im Pliozän, ähnlich heutigen Bedingungen. In dieser Arbeit werden geländeorientierte und geochemische Methoden kombiniert, um Erkenntnisse über die Abläufe von topografiebildenden Deformations- und Hebungsprozessen zu gewinnen und Wechselwirkungen mit der daraus resultierenden Niederschlagsverteilung, Erosion und Sedimentation innerhalb tektonisch aktiver Gebirge zu erforschen. Diese Erkenntnisse sind für ein besseres Verständnis von Subduktionsgebirgen essentiell, besonders hinsichtlich des Deformationsstils und der zeitlich-räumlichen Beziehungen bei der Hebung und Sedimentbeckenbildung. Diese Arbeit weist darüberhinaus auf die Bedeutung stabiler Isotopensysteme zur Beantwortung paläoaltimetrischer Fragestellungen und zur Erforschung von Paläoumweltbedingungen hin und liefert wichtige Erkenntnisse für einen kritischen Umgang mit solchen Daten in anderen Regionen. N2 - Two of the most controversial issues concerning the late Cenozoic evolution of the Andean orogen are the timing of uplift of the intraorogenic Puna plateau and its eastern border, the Eastern Cordillera, and ensuing changes in climatic and surface-process conditions in the intermontane basins of the NW-Argentine Andes. The Eastern Cordillera separates the internally drained, arid Puna from semi-arid intermontane basins and the humid sectors of the Andean broken foreland and the Subandean fold-and-thrust belt to the east. With elevations between 4,000 and 6,000 m the eastern flanks of the Andes form an efficient orographic barrier with westward-increasing elevation and asymmetric rainfall distribution and amount with respect to easterly moisture-bearing winds. This is mirrored by pronounced gradients in the efficiency of surface processes that erode and re-distribute sediment from the uplifting ranges. Although the overall pattern of deformation and uplift in this sector of the southern central Andes shows an eastward migration of deformation, a well-developed deformation front does not exist and uplift and associated erosion and sedimentary processes are highly disparate in space and time. In addition, periodic deformation within intermontane basins, and continued diachronous foreland uplifts associated with the reactivation of inherited basement structures furthermore make a rigorous assessment of the spatiotemporal uplift patterns difficult. This thesis focuses on the tectonic evolution of the Eastern Cordillera of NW Argentina, the depositional history of its intermontane sedimentary basins, and the regional topographic evolution of the eastern flank of the Puna Plateau. The intermontane basins of the Eastern Cordillera and the adjacent morphotectonic provinces of the Sierras Pampeanas and the Santa Bárbara System are akin to reverse fault bounded, filled, and partly coalesced sedimentary basins of the Puna Plateau. In contrast to the Puna basins, however, which still form intact morphologic entities, repeated deformation, erosion, and re-filling have impacted the basins in the Eastern Cordillera. This has resulted in a rich stratigraphy of repeated basin fills, but many of these basins have retained vestiges of their early depositional history that may reach back in time when these areas were still part of a contiguous and undeformed foreland basin. Fortunately, these strata also contain abundant volcanic ashes that are not only important horizons to decipher tectono-sedimentary events through U-Pb geochronology and geochemical correlation, but they also represent terrestrial recorders of the hydrogen-isotope composition of ancient meteoric waters that can be compared to the isotopic composition of modern meteoric water. The ash horizons are thus unique recorders of past environmental conditions and lend themselves to tracking the development of rainfall barriers and tectonically forced climate and environmental change through time. U-Pb zircon geochronology and paleocurrent reconstructions of conglomerate sequences in the Humahuaca Basin of the Eastern Cordillera at 23.5° S suggest that the basin was an integral part of a largely unrestricted depositional system until 4.2 Ma, which subsequently became progressively decoupled from the foreland by range uplifts to the east that forced easterly moisture-bearing winds to precipitate in increasingly eastward locations. Multiple cycles of severed hydrological conditions and drainage re-capture are identified together with these processes that were associated with basin filling and sediment evacuation, respectively. Moreover, systematic relationships among faults, regional unconformities and deformed landforms reveal a general pattern of intra-basin deformation that appears to be linked with basin-internal deformation during or subsequent to episodes of large-scale sediment removal. Some of these observations are supported by variations in the hydrogen stable isotope composition of volcanic glass from the Neogene to Quaternary sedimentary record, which can be related to spatiotemporal changes in topography and associated orographic effects. δDg values in the basin strata reveal two main trends associated with surface uplift in the catchment area between 6.0 and 3.5 Ma and the onset of semiarid conditions in the basin following the attainment of threshold elevations for effective orographic barriers to the east after 3.5 Ma. The disruption of sediment supply from western sources after 4.2 Ma and subsequent hinterland aridification, moreover, emphasize the possibility that these processes were related to lateral orogenic growth of the adjacent Puna Plateau. As a result of the hinterland aridification the regions in the orogen interior have been characterized by an inefficient fluvial system, which in turn has helped maintaining internal drainage conditions, sediment storage, and relief reduction within high-elevation basins. The diachronous nature of basin formation and impacts on the fluvial system in the adjacent broken foreland is underscored by the results of detailed sediment provenance and paleocurrent analyses, as well as U-Pb zircon geochronology in the Lerma and Metán basins at ca. 25° S. This is particularly demonstrated by the isolated uplift of the Metán range at ~10 Ma, which is more than 50 km away from the presently active orogenic front along the eastern Puna margin and the Eastern Cordillera to the west. At about 5 Ma, Puna-sourced sediments disappear from the foreland record, documenting further range uplifts in the Eastern Cordillera and hydrological isolation of the neighboring Angastaco Basin from the foreland. Finally, during the late Pliocene and Quaternary, deformation has been accommodated across the entire foreland and is still active. To elucidate the interactions between tectonically controlled changes in elevation and their impact on atmospheric circulation processes in this region, this thesis provides additional, temporally well-constrained hydrogen stable isotope results of volcanic glass samples from the broken foreland, including the Angastaco Basin, and other intermontane basins farther south. The results suggest similar elevations of intermontane basins and the foreland sectors prior to ca. 7 Ma. In case of the Angastaco Basin the region was affected by km-scale surface uplift of the basin. A comparison with coeval isotope data collected from sedimentary sequences in the Puna plateau explains rapid shifts in the intermontane δDg record and supports the notion of recurring phases of enhanced deep convection during the Pliocene, and thus climatic conditions during the middle to late Pliocene similar to the present day. Combined, field-based and isotope geochemical methods used in this study of the NW-Argentine Andes have thus helped to gain insight into the systematics, rate changes, interactions, and temporal characteristics among tectonically controlled deformation patterns, the build-up of topography impacting atmospheric processes, the distribution of rainfall, and resulting surface processes in a tectonically active mountain belt. Ultimately, this information is essential for a better understanding of the style and the rates at which non-collisional mountain belts evolve, including the development orogenic plateaus and their bordering flanks. The results presented in this study emphasize the importance of stable isotope records for paleoaltimetric and paleoenvironmental studies in mountain belts and furnishes important data for a rigorous interpretation of such records. KW - geology KW - Argentina KW - Eastern Cordillera KW - Puna KW - neotectonics KW - paleoaltimetry KW - stable isotopes KW - volcanic glass KW - U-Pb geochronology KW - Geologie KW - Argentinien KW - Ostkordillere KW - Puna KW - Neotektonik KW - Paläoaltimetrie KW - stabile Isotope KW - vulkanischer Gläser KW - U-Pb Geochronologie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-82301 ER - TY - THES A1 - Stoltnow, Malte T1 - Magmatic-hydrothermal processes along the porphyry to epithermal transition T1 - Magmatisch-hydrothermale Prozesse entlang des porphyrisch-epithermalen Übergangs N2 - Magmatic-hydrothermal systems form a variety of ore deposits at different proximities to upper-crustal hydrous magma chambers, ranging from greisenization in the roof zone of the intrusion, porphyry mineralization at intermediate depths to epithermal vein deposits near the surface. The physical transport processes and chemical precipitation mechanisms vary between deposit types and are often still debated. The majority of magmatic-hydrothermal ore deposits are located along the Pacific Ring of Fire, whose eastern part is characterized by the Mesozoic to Cenozoic orogenic belts of the western North and South Americas, namely the American Cordillera. Major magmatic-hydrothermal ore deposits along the American Cordillera include (i) porphyry Cu(-Mo-Au) deposits (along the western cordilleras of Mexico, the western U.S., Canada, Chile, Peru, and Argentina); (ii) Climax- (and sub−) type Mo deposits (Colorado Mineral Belt and northern New Mexico); and (iii) porphyry and IS-type epithermal Sn(-W-Ag) deposits of the Central Andean Tin Belt (Bolivia, Peru and northern Argentina). The individual studies presented in this thesis primarily focus on the formation of different styles of mineralization located at different proximities to the intrusion in magmatic-hydrothermal systems along the American Cordillera. This includes (i) two individual geochemical studies on the Sweet Home Mine in the Colorado Mineral Belt (potential endmember of peripheral Climax-type mineralization); (ii) one numerical modeling study setup in a generic porphyry Cu-environment; and (iii) a numerical modeling study on the Central Andean Tin Belt-type Pirquitas Mine in NW Argentina. Microthermometric data of fluid inclusions trapped in greisen quartz and fluorite from the Sweet Home Mine (Detroit City Portal) suggest that the early-stage mineralization precipitated from low- to medium-salinity (1.5-11.5 wt.% equiv. NaCl), CO2-bearing fluids at temperatures between 360 and 415°C and at depths of at least 3.5 km. Stable isotope and noble gas isotope data indicate that greisen formation and base metal mineralization at the Sweet Home Mine was related to fluids of different origins. Early magmatic fluids were the principal source for mantle-derived volatiles (CO2, H2S/SO2, noble gases), which subsequently mixed with significant amounts of heated meteoric water. Mixing of magmatic fluids with meteoric water is constrained by δ2Hw-δ18Ow relationships of fluid inclusions. The deep hydrothermal mineralization at the Sweet Home Mine shows features similar to deep hydrothermal vein mineralization at Climax-type Mo deposits or on their periphery. This suggests that fluid migration and the deposition of ore and gangue minerals in the Sweet Home Mine was triggered by a deep-seated magmatic intrusion. The second study on the Sweet Home Mine presents Re-Os molybdenite ages of 65.86±0.30 Ma from a Mo-mineralized major normal fault, namely the Contact Structure, and multimineral Rb-Sr isochron ages of 26.26±0.38 Ma and 25.3±3.0 Ma from gangue minerals in greisen assemblages. The age data imply that mineralization at the Sweet Home Mine formed in two separate events: Late Cretaceous (Laramide-related) and Oligocene (Rio Grande Rift-related). Thus, the age of Mo mineralization at the Sweet Home Mine clearly predates that of the Oligocene Climax-type deposits elsewhere in the Colorado Mineral Belt. The Re-Os and Rb-Sr ages also constrain the age of the latest deformation along the Contact Structure to between 62.77±0.50 Ma and 26.26±0.38 Ma, which was employed and/or crosscut by Late Cretaceous and Oligocene fluids. Along the Contact Structure Late Cretaceous molybdenite is spatially associated with Oligocene minerals in the same vein system, a feature that precludes molybdenite recrystallization or reprecipitation by Oligocene ore fluids. Ore precipitation in porphyry copper systems is generally characterized by metal zoning (Cu-Mo to Zn-Pb-Ag), which is suggested to be variably related to solubility decreases during fluid cooling, fluid-rock interactions, partitioning during fluid phase separation and mixing with external fluids. The numerical modeling study setup in a generic porphyry Cu-environment presents new advances of a numerical process model by considering published constraints on the temperature- and salinity-dependent solubility of Cu, Pb and Zn in the ore fluid. This study investigates the roles of vapor-brine separation, halite saturation, initial metal contents, fluid mixing, and remobilization as first-order controls of the physical hydrology on ore formation. The results show that the magmatic vapor and brine phases ascend with different residence times but as miscible fluid mixtures, with salinity increases generating metal-undersaturated bulk fluids. The release rates of magmatic fluids affect the location of the thermohaline fronts, leading to contrasting mechanisms for ore precipitation: higher rates result in halite saturation without significant metal zoning, lower rates produce zoned ore shells due to mixing with meteoric water. Varying metal contents can affect the order of the final metal precipitation sequence. Redissolution of precipitated metals results in zoned ore shell patterns in more peripheral locations and also decouples halite saturation from ore precipitation. The epithermal Pirquitas Sn-Ag-Pb-Zn mine in NW Argentina is hosted in a domain of metamorphosed sediments without geological evidence for volcanic activity within a distance of about 10 km from the deposit. However, recent geochemical studies of ore-stage fluid inclusions indicate a significant contribution of magmatic volatiles. This study tested different formation models by applying an existing numerical process model for porphyry-epithermal systems with a magmatic intrusion located either at a distance of about 10 km underneath the nearest active volcano or hidden underneath the deposit. The results show that the migration of the ore fluid over a 10-km distance results in metal precipitation by cooling before the deposit site is reached. In contrast, simulations with a hidden magmatic intrusion beneath the Pirquitas deposit are in line with field observations, which include mineralized hydrothermal breccias in the deposit area. N2 - Magmatisch-hydrothermale Systeme bilden eine Vielzahl von Erzlagerstätten in unterschiedlicher Entfernung zu wasserhaltigen Magmakammern in der oberen Erdkruste, von der Greisenbildung in der Dachzone der Intrusion über die Porphyrmineralisierung in mittleren Tiefen bis hin zu epithermalen Ganglagerstätten nahe der Erdoberfläche. Die physikalischen Transportprozesse und chemischen Ausfällungsmechanismen variieren zwischen den verschiedenen Lagerstättentypen und werden immer noch häufig diskutiert. Die meisten magmatisch-hydrothermalen Erzlagerstätten befinden sich entlang des Pazifischen Feuerrings, dessen östlicher Teil durch die mesozoischen bis känozoischen orogenen Gürtel des westlichen Nord- und Südamerikas, zusammen die Amerikanische Kordillere, vertreten ist. Zu den wichtigsten magmatisch-hydrothermalen Erzlagerstätten entlang der Amerikanischen Kordillere gehören (i) Cu(-Mo-Au)-Porphyrlagerstätten (entlang der westlichen Kordilleren Mexikos, der westlichen USA, Kanadas, Chiles, Perus und Argentiniens); (ii) Mo-Lagerstätten vom Climax- (und Sub-)Typ (Colorado Mineral Belt und nördliches New Mexico); und (iii) porphyrische und epithermale Sn(-W-Ag)-Lagerstätten vom IS-Typ des Zentralandinen-Zinngürtels (Bolivien, Peru und Nordargentinien). Die einzelnen Studien dieser Arbeit konzentrieren sich in erster Linie auf die Bildung verschiedener Vererzungsstypen, die sich in unterschiedlicher Entfernung zur Intrusion in magmatisch-hydrothermalen Systemen entlang der amerikanischen Kordillere befinden. Dazu gehören (i) zwei geochemische Einzelstudien über die Sweet Home-Mine im Colorado Mineral Belt (potenzielles Endglied der peripheren Mineralisierung des Climax-Typs); (ii) eine numerische Modellierungsstudie in einem generischen Cu-Porphyr-Setup; und (iii) eine numerische Modellierungsstudie über die Pirquitas-Mine des Zentralandinen-Zinn-Typs in Nordwest-Argentinien. Mikrothermometrische Daten von Fluideinschlüssen, die in Greisenquarz und -fluorit aus der Sweet Home-Mine (Detroit City Portal) eingeschlossen sind, deuten darauf hin, dass die Mineralisierung im Frühstadium aus CO2-haltigen Fluiden mit niedrigem bis mittlerem Salzgehalt (1,5-11,5 Gew.-% NaCl-Äquivalent) bei Temperaturen zwischen 360 und 415 °C und in einer Tiefe von mindestens 3,5 km ausgefällt wurde. Daten zu stabilen Isotopen und Edelgasisotopen zeigen, dass die Greisenbildung und die Buntmetallvererzung in der Sweet Home-Mine mit Fluiden unterschiedlichen Ursprungs in Verbindung stehen. Frühe magmatische Fluide waren die Hauptquelle für aus dem Mantel stammende Volatile (CO2, H2S/SO2, Edelgase), die sich anschließend mit erheblichen Mengen erhitzten meteorischen Wassers vermischten. Die Vermischung von magmatischen Fluiden mit meteorischem Wasser wird durch die Zusammenhänge von δ2Hw-δ18Ow der Fluideinschlüsse belegt. Die tiefe hydrothermale Vererzung in der Sweet Home-Mine weist ähnliche Merkmale auf wie die tiefe hydrothermale Gangvererzung in Mo-Lagerstätten vom Climax-Typ oder in deren Peripherie. Dies deutet darauf hin, dass die Fluidmigration und die Ausfällung von Erz und Gangmineralen in der Sweet Home-Mine durch eine tief sitzende magmatische Intrusion angeregt wurde. Die zweite Studie über die Sweet Home Mine präsentiert ein Re-Os-Molybdänit-Alter von 65,86±0,30 Ma aus einer Mo-vererzten Abschiebung, namentlich der Contact Structure, und ein multimineralisches Rb-Sr-Isochronen-Alter von 26,26±0,38 Ma und 25,3±3,0 Ma von Gangmineralen in Greisenvergesellschaftungen. Die Altersdaten deuten darauf hin, dass die Vererzungen in der Sweet Home Mine während zweier separater Ereignisse entstand: In der späten Kreidezeit (im Zusammenhang mit der Laramidischen Orogenese) und im Oligozän (im Zusammenhang mit dem Rio Grande Rift). Das Alter der Mo-Vererzung in der Sweet Home Mine liegt demnach eindeutig vor dem der oligozänen Climax-Lagerstätten anderswo im Colorado Mineral Belt. Die Re-Os- und Rb-Sr-Alter grenzen auch das Alter der jüngsten Deformation entlang der Contact Structure, die von spätkreidezeitlichen und oligozänen Fluiden genutzt und/oder geschnitten wurde, auf 62,77±0,50 Ma und 26,26±0,38 Ma ein. Entlang der Contact Structure ist spätkreidezeitlicher Molybdänit räumlich mit Mineralen aus dem Oligozän in demselben Gangsystem vergesellschaftet, was eine Rekristallisierung oder Ausfällung von Molybdänit durch oligozäne Fluide ausschließt. Die Erzausfällung in porphyrischen Kupfersystemen ist im Allgemeinen durch eine Metallzonierung (Cu-Mo bis Zn-Pb-Ag) gekennzeichnet, die vermutlich mit der Abnahme der Löslichkeit während der Fluidabkühlung, den Wechselwirkungen zwischen Fluid und Gestein, der Partitionierung während der Phasenseparation des Fluids und der Mischung mit externen Fluiden in Zusammenhang steht. Die numerische Modellierung, die in einer generischen Porphyr-Cu-Umgebung durchgeführt wurde, stellt neue Fortschritte eines numerischen Prozessmodells dar, indem sie veröffentlichte Randbedingungen für die temperatur- und salinitätsabhängige Löslichkeit von Cu, Pb und Zn im Erzfluid berücksichtigt. Diese Studie untersucht die Rolle der Dampf-Sole-Separation, der Halitsättigung, des anfänglichen Metallgehalts, der Fluidmischung und der Remobilisierung als Einflussfaktoren erster Ordnung der physikalischen Hydrologie auf die Erzbildung. Die Ergebnisse zeigen, dass die magmatischen Dampf- und Solephasen mit unterschiedlichen Verweilzeiten, aber als mischbare Fluide aufsteigen, wobei eine Erhöhung des Salzgehalts zu einem metall-ungesättigten Gesamtfluid führt. Die Freisetzungsraten der magmatischen Fluide wirken sich auf die Lage der thermohalinen Fronten aus, was zu widersprüchlichen Mechanismen für die Erzausfällung führt: Höhere Raten führen zu einer Halitsättigung ohne signifikante Metallzonierung, niedrigere Raten erzeugen zonierte Erzschalen aufgrund der Mischung mit meteorischem Wasser. Unterschiedliche Metallgehalte können sich auf die Reihenfolge der endgültigen Metallausfällung auswirken. Die Wiederauflösung bereits ausgefällter Metalle führt zu zonierten Erzschalenmustern in periphereren Bereichen und entkoppelt auch die Halitsättigung von der Erzausfällung. Die epithermale Pirquitas Sn-Ag-Pb-Zn-Mine im Nordwesten Argentiniens befindet sich in einem Bereich metamorphisierter Sedimente ohne geologische Hinweise auf vulkanische Aktivitäten in einer Entfernung von etwa 10 km zur Lagerstätte. Jüngste geochemische Untersuchungen von Fluideinschlüssen im Erzstadium deuten jedoch auf einen bedeutenden Beitrag von magmatischen Volatilen hin. In dieser Studie wurden verschiedene Entstehungsmodelle getestet, indem ein bestehendes numerisches Prozessmodell für porphyrisch-epithermale Systeme mit einer magmatischen Intrusion angewandt wurde, die sich entweder in einer Entfernung von etwa 10 km unterhalb des nächstgelegenen aktiven Vulkans oder verborgen unterhalb der Lagerstätte befindet. Die Ergebnisse zeigen, dass die Migration der Erzflüssigkeit über eine Entfernung von 10 km zu einer Metallausfällung durch Abkühlung führt, bevor die Lagerstätte erreicht wird. Im Gegensatz dazu stimmen die Simulationen mit einer verborgenen magmatischen Intrusion unter der Pirquitas-Lagerstätte mit den Feldbeobachtungen überein, die mineralisierte hydrothermale Brekzien im Lagerstättenbereich umfassen. KW - magmatic KW - hydrothermal KW - ore KW - deposits KW - copper KW - lead KW - zinc KW - molybdenum KW - numerical KW - modeling KW - Sweet KW - Home KW - Pirquitas KW - Colorado KW - Argentina KW - Argentinien KW - Colorado KW - Home KW - Pirquitas KW - Sweet KW - Kupfer KW - Lagerstätte KW - hydrothermal KW - Blei KW - magmatisch KW - Modellierung KW - Molybdän KW - numerisch KW - Erz KW - Zink Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-611402 ER -