TY - JOUR A1 - Sanchez, S. A1 - Wicht, J. A1 - Baerenzung, Julien A1 - Holschneider, Matthias T1 - Sequential assimilation of geomagnetic observations BT - perspectives for the reconstruction and prediction of core dynamics JF - Geophysical journal international N2 - High-precision observations of the present-day geomagnetic field by ground-based observatories and satellites provide unprecedented conditions for unveiling the dynamics of the Earth’s core. Combining geomagnetic observations with dynamo simulations in a data assimilation (DA) framework allows the reconstruction of past and present states of the internal core dynamics. The essential information that couples the internal state to the observations is provided by the statistical correlations from a numerical dynamo model in the form of a model covariance matrix. Here we test a sequential DA framework, working through a succession of forecast and analysis steps, that extracts the correlations from an ensemble of dynamo models. The primary correlations couple variables of the same azimuthal wave number, reflecting the predominant axial symmetry of the magnetic field. Synthetic tests show that the scheme becomes unstable when confronted with high-precision geomagnetic observations. Our study has identified spurious secondary correlations as the origin of the problem. Keeping only the primary correlations by localizing the covariance matrix with respect to the azimuthal wave number suffices to stabilize the assimilation. While the first analysis step is fundamental in constraining the large-scale interior state, further assimilation steps refine the smaller and more dynamical scales. This refinement turns out to be critical for long-term geomagnetic predictions. Increasing the assimilation steps from one to 18 roughly doubles the prediction horizon for the dipole from about  tree to six centuries, and from 30 to about  60 yr for smaller observable scales. This improvement is also reflected on the predictability of surface intensity features such as the South Atlantic Anomaly. Intensity prediction errors are decreased roughly by a half when assimilating long observation sequences. KW - Magnetic field variations through time KW - Core dynamics KW - Dynamo: theories and simulations KW - Inverse theory KW - Probabilistic forecasting Y1 - 2019 U6 - https://doi.org/10.1093/gji/ggz090 SN - 0956-540X SN - 1365-246X VL - 217 IS - 2 SP - 1434 EP - 1450 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Guillemoteau, Julien A1 - Simon, Francois-Xavier A1 - Hulin, Guillaume A1 - Dousteyssier, Bertrand A1 - Dacko, Marion A1 - Tronicke, Jens T1 - 3-D imaging of subsurface magnetic permeability/susceptibility with portable frequency domain electromagnetic sensors for near surface exploration JF - Geophysical journal international N2 - The in-phase response collected by portable loop-loop electromagnetic induction (EMI) sensors operating at low and moderate induction numbers (<= 1) is typically used for sensing the magnetic permeability (or susceptibility) of the subsurface. This is due to the fact that the in-phase response contains a small induction fraction and a preponderant induced magnetization fraction. The magnetization fraction follows the magneto-static equations similarly to the magnetic method but with an active magnetic source. The use of an active source offers the possibility to collect data with several loop-loop configurations, which illuminate the subsurface with different sensitivity patterns. Such multiconfiguration soundings thereby allows the imaging of subsurface magnetic permeability/susceptibility variations through an inversion procedure. This method is not affected by the remnant magnetization and theoretically overcomes the classical depth ambiguity generally encountered with passive geomagnetic data. To invert multiconfiguration in-phase data sets, we propose a novel methodology based on a full-grid 3-D multichannel deconvolution (MCD) procedure. This method allows us to invert large data sets (e.g. consisting of more than a hundred thousand of data points) for a dense voxel-based 3-D model of magnetic susceptibility subject to smoothness constraints. In this study, we first present and discuss synthetic examples of our imaging procedure, which aim at simulating realistic conditions. Finally, we demonstrate the applicability of our method to field data collected across an archaeological site in Auvergne (France) to image the foundations of a Gallo-Roman villa built with basalt rock material. Our synthetic and field data examples demonstrate the potential of the proposed inversion procedure offering new and complementary ways to interpret data sets collected with modern EMI instruments. KW - Magnetic properties KW - Controlled source electromagnetics (CSEM) KW - Electromagnetic theory KW - Environmental magnetism KW - Inverse theory Y1 - 2019 U6 - https://doi.org/10.1093/gji/ggz382 SN - 0956-540X SN - 1365-246X VL - 219 IS - 3 SP - 1773 EP - 1785 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Pick, Leonie A1 - Korte, Monika T1 - An annual proxy for the geomagnetic signal of magnetospheric currents on Earth based on observatory data from 1900–2010 JF - Geophysical Journal International N2 - We introduce the Annual Magnetospheric Currents index as long-term proxy for the geomagnetic signal of magnetospheric currents on Earth valid within the time span 1900–2010. Similar to the widely used disturbance storm time and ‘Ring Current’ indices, it is based on geomagnetic observatory data, but provides a realistic absolute level and uncertainty estimates. Crucial aspects to this end are the revision of observatory crustal biases as well as the implementation of a Bayesian inversion accounting for uncertainties in the main field estimate, both required for the index derivation. The observatory choice is based on a minimization of index variance during a reference period spanning 1960–2010. The new index is capable of correcting observatory time series from large-scale external signals in a user-friendly manner. At present the index is only available as annual mean values. An extension to hourly values for the same time span is in progress. KW - Magnetic field variations through time KW - Satellite magnetics KW - Inverse theory KW - Statistical methods KW - Time-series analysis Y1 - 2017 U6 - https://doi.org/10.1093/gji/ggx367 SN - 1365-246X SN - 0956-540X VL - 211 IS - 2 SP - 1223 EP - 1236 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Lontsi, Agostiny Marrios A1 - Jose Sanchez-Sesma, Francisco A1 - Camillo Molina-Villegas, Juan A1 - Ohrnberger, Matthias A1 - Krüger, Frank T1 - Full microtremor H/V(z,f) inversion for shallow subsurface characterization JF - Geophysical journal international N2 - The H/V spectral ratio has emerged as a single station method within the seismic ambient noise analysis field by its capability to quickly estimate the frequency of resonance at a site and through inversion the average profile information. Although it is easy to compute from experimental data, its counter theoretical part is not obvious when building a forward model which can help in reconstructing the derived H/V spectrum. This has led to the simplified assumption that the noise wavefield is mainly composed of Rayleigh waves and the derived H/V often used without further correction. Furthermore, only the right (and left) flank around the H/V peak frequency is considered in the inversion for the subsurface 1-D shear wave velocity profile. A new theoretical approach for the interpretation of the H/V spectral ratio has been presented by Sanchez-Sesmaet al. In this paper, the fundamental idea behind their theory is presented as it applies to receivers at depth. A smooth H/V(z, f) spectral curve on a broad frequency range is obtained by considering a fine integration step which is in turn time consuming. We show that for practical purposes and in the context of inversion, this can be considerably optimized by using a coarse integration step combined with the smoothing of the corresponding directional energy density (DED) spectrum. Further analysis shows that the obtained H/V(z, f) spectrum computed by the mean of the imaginary part of Green's function method could also be recovered using the reflectivity method for a medium well illuminated by seismic sources. Inversion of synthetic H/V(z, f) spectral curve is performed for a single layer over a half space. The striking results allow to potentially use the new theory as a forward computation of the H/V(z, f) to fully invert the experimental H/V spectral ratio at the corresponding depth for the shear velocity profile (Vs) and additionally the compressional velocity profile (Vp) using receivers both at the surface and in depth. We use seismic ambient noise data in the frequency range of 0.2-50 Hz recorded at two selected sites in Germany where borehole information is also available. The obtained 1-D Vs and Vp profiles are correlated with geological log information. Results from shallow geophysical experiment are also used for comparison. KW - Inverse theory KW - Interferometry KW - Site effects Y1 - 2015 U6 - https://doi.org/10.1093/gji/ggv132 SN - 0956-540X SN - 1365-246X VL - 202 IS - 1 SP - 298 EP - 312 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Grigoli, Francesco A1 - Cesca, Simone A1 - Amoroso, Ortensia A1 - Emolo, Antonio A1 - Zollo, Aldo A1 - Dahm, Torsten T1 - Automated seismic event location by waveform coherence analysis JF - Geophysical journal international N2 - Automated location of seismic events is a very important task in microseismic monitoring operations as well for local and regional seismic monitoring. Since microseismic records are generally characterized by low signal-to-noise ratio, automated location methods are requested to be noise robust and sufficiently accurate. Most of the standard automated location routines are based on the automated picking, identification and association of the first arrivals of P and S waves and on the minimization of the residuals between theoretical and observed arrival times of the considered seismic phases. Although current methods can accurately pick P onsets, the automatic picking of the S onset is still problematic, especially when the P coda overlaps the S wave onset. In this paper, we propose a picking free earthquake location method based on the use of the short-term-average/long-term-average (STA/LTA) traces at different stations as observed data. For the P phases, we use the STA/LTA traces of the vertical energy function, whereas for the S phases, we use the STA/LTA traces of a second characteristic function, which is obtained using the principal component analysis technique. In order to locate the seismic event, we scan the space of possible hypocentral locations and origin times, and stack the STA/LTA traces along the theoretical arrival time surface for both P and S phases. Iterating this procedure on a 3-D grid, we retrieve a multidimensional matrix whose absolute maximum corresponds to the spatial coordinates of the seismic event. A pilot application was performed in the Campania-Lucania region (southern Italy) using a seismic network (Irpinia Seismic Network) with an aperture of about 150 km. We located 196 crustal earthquakes (depth < 20 km) with magnitude range 1.1 < M-L < 2.7. A subset of these locations were compared with accurate manual locations refined by using a double-difference technique. Our results indicate a good agreement with manual locations. Moreover, our method is noise robust and performs better than classical location methods based on the automatic picking of the P and S waves first arrivals. KW - Time-series analysis KW - Inverse theory KW - Earthquake source observations KW - Seismicity and tectonics KW - Early warning Y1 - 2014 U6 - https://doi.org/10.1093/gji/ggt477 SN - 0956-540X SN - 1365-246X VL - 196 IS - 3 SP - 1742 EP - 1753 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Wang, Lifeng A1 - Hainzl, Sebastian A1 - Zöller, Gert T1 - Assessment of stress coupling among the inter-, co- and post-seismic phases related to the 2004 M6 Parkfield earthquake JF - Geophysical journal international N2 - Due to large uncertainties and non-uniqueness in fault slip inversion, the investigation of stress coupling based on the direct comparison of independent slip inversions, for example, between the coseismic slip distribution and the interseismic slip deficit, may lead to ambiguous conclusions. In this study, we therefore adopt the stress-constrained joint inversion in the Bayesian approach of Wang et al., and implement the physical hypothesis of stress coupling as a prior. We test the hypothesis that interseismic locking is coupled with the coseismic rupture, and the early post-seismic deformation is a stress relaxation process in response to the coseismic stress perturbation. We characterize the role of stress coupling in the seismic cycle by evaluating the efficiency of the model to explain the available data. Taking the 2004 M6 Parkfield earthquake as a study case, we find that the stress coupling hypothesis is in agreement with the data. The coseismic rupture zone is found to be strongly locked during the interseismic phase and the post-seismic slip zone is indicated to be weakly creeping. The post-seismic deformation plays an important role to rebuild stress in the coseismic rupture zone. Based on our results for the stress accumulation during both inter- and post-seismic phase in the coseismic rupture zone, together with the coseismic stress drop, we estimate a recurrence time of M6 earthquake in Parkfield around 23-41 yr, suggesting that the duration of 38 yr between the two recent M6 events in Parkfield is not a surprise. KW - Inverse theory KW - Seismic cycle KW - Dynamics and mechanics of faulting Y1 - 2014 U6 - https://doi.org/10.1093/gji/ggu102 SN - 0956-540X SN - 1365-246X VL - 197 IS - 3 SP - 1858 EP - 1868 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Hobiger, M. A1 - Cornou, C. A1 - Wathelet, M. A1 - Di Giulio, G. A1 - Knapmeyer-Endrun, B. A1 - Renalier, F. A1 - Bard, Pierre-Yves A1 - Savvaidis, Alexandros A1 - Hailemikael, S. A1 - Le Bihan, N. A1 - Ohrnberger, Matthias A1 - Theodoulidis, N. T1 - Ground structure imaging by inversions of Rayleigh wave ellipticity sensitivity analysis and application to European strong-motion sites JF - Geophysical journal international N2 - The knowledge of the local soil structure is important for the assessment of seismic hazards. A widespread, but time-consuming technique to retrieve the parameters of the local underground is the drilling of boreholes. Another way to obtain the shear wave velocity profile at a given location is the inversion of surface wave dispersion curves. To ensure a good resolution for both superficial and deeper layers, the used dispersion curves need to cover a wide frequency range. This wide frequency range can be obtained using several arrays of seismic sensors or a single array comprising a large number of sensors. Consequently, these measurements are time-consuming. A simpler alternative is provided by the use of the ellipticity of Rayleigh waves. The frequency dependence of the ellipticity is tightly linked to the shear wave velocity profile. Furthermore, it can be measured using a single seismic sensor. As soil structures obtained by scaling of a given model exhibit the same ellipticity curve, any inversion of the ellipticity curve alone will be ambiguous. Therefore, additional measurements which fix the absolute value of the shear wave velocity profile at some points have to be included in the inversion process. Small-scale spatial autocorrelation measurements or MASW measurements can provide the needed data. Using a theoretical soil structure, we show which parts of the ellipticity curve have to be included in the inversion process to get a reliable result and which parts can be omitted. Furthermore, the use of autocorrelation or high-frequency dispersion curves will be highlighted. The resulting guidelines for inversions including ellipticity data are then applied to real data measurements collected at 14 different sites during the European NERIES project. It is found that the results are in good agreement with dispersion curve measurements. Furthermore, the method can help in identifying the mode of Rayleigh waves in dispersion curve measurements. KW - Inverse theory KW - Surface waves and free oscillations KW - Site effects KW - Computational seismology KW - Wave propagation Y1 - 2013 U6 - https://doi.org/10.1093/gji/ggs005 SN - 0956-540X VL - 192 IS - 1 SP - 207 EP - 229 PB - Oxford Univ. Press CY - Oxford ER -