TY - THES A1 - Kesten, Dagmar T1 - Structural observations at the southern Dead Sea Transform from seismic reflection data and ASTER satellite images N2 - Die folgende Arbeit ist Teil des multidisziplinären Projektes DESERT (DEad SEa Rift Transect), welches seit dem Jahr 2000 im Nahen Osten durchgeführt wird. Dabei geht es primär um die Struktur der südlichen Dead Sea Transform (DST; Tote-Meer-Transformstörung), Plattengrenze zwischen Afrika (Sinai) und der Arabischen Mikroplatte. Seit dem Miozän beträgt der sinistrale Versatz an dieser bedeutenden aktiven Blattverschiebung mehr als 100 km. Das steilwinkelseismische (NVR) Experiment von DESERT querte die DST im Arava Tal zwischen Rotem Meer und Totem Meer, wo die Hauptstörung auch Arava Fault genannt wird. Das 100 km lange Profil erstreckte sich von Sede Boqer/Israel im Nordwesten nach Ma'an/Jordanien im Südosten und fällt mit dem zentralen Teil einer weitwinkelseismischen Profillinie zusammen. Steilwinkelseismische Messungen stellen bei der Bestimmung der Krustenstruktur bis zur Krusten/Mantel-Grenze ein wichtiges Instrument dar. Obwohl es kaum möglich ist, steilstehende Störungszonen direkt abzubilden, geben abrupte Veränderungen des Reflektivitätsmuster oder plötzlich endende Reflektoren indirekte Hinweise auf Transformbewegung. Da bis zum DESERT Experiment keine anderen reflexionsseismischen Messungen über die DST ausgeführt worden waren, waren wichtige Aspekte dieser Transform-Plattengrenze und der damit verbundenen Krustenstruktur nicht bekannt. Mit dem Projekt sollte deshalb untersucht werden, wie sich die DST sowohl in der oberen als auch in der unteren Kruste manifestiert. Zu den Fragestellungen gehörte unter anderem, ob sich die DST bis in den Mantel fortsetzt und ob ein Versatz der Krusten/Mantel-Grenze beobachtet werden kann. So ein Versatz ist von anderen großen Transformstörungen bekannt. In der vorliegenden Arbeit werden zunächst die Methode der Steilwinkelseismik und die Datenverarbeitung kurz erläutert, bevor die Daten geologisch interpretiert werden. Bei der Interpetation werden die Ergebnisse anderer relevanter Studien berücksichtigt. Geologische Geländearbeiten im Gebiet des NVR Profiles ergaben, dass die Arava Fault zum Teil charakterisiert ist durch niedrige Steilstufen in den neogenen Sedimenten, durch kleine Druckrücken oder Rhomb-Gräben. Ein typischer Aufbau der Störungszone mit einem Störungskern, einer störungsbezogenen Deformationszone und einem undeformierten Ausgangsgestein, wie er von anderen großen Störungszonen beschrieben worden ist, konnte nicht gefunden werden. Deshalb wurden zur Ergänzung der Reflexionsseismik, welche vor allem die tieferen Krustenstrukturen abbildet, ASTER (Advanced Spacebourne Thermal Emission and Reflection Radiometer) Satellitendaten herangezogen, um oberflächennahe Deformation und neotektonische Aktivität zu bestimmen. N2 - Following work is embedded in the multidisciplinary study DESERT (DEad SEa Rift Transect) that has been carried out in the Middle East since the beginning of the year 2000. It focuses on the structure of the southern Dead Sea Transform (DST), the transform plate boundary between Africa (Sinai) and the Arabian microplate. The left-lateral displacement along this major active strike-slip fault amounts to more than 100 km since Miocene times. The DESERT near-vertical seismic reflection (NVR) experiment crossed the DST in the Arava Valley between Red Sea and Dead Sea, where its main fault is called Arava Fault. The 100 km long profile extends in a NW—SE direction from Sede Boqer/Israel to Ma'an/Jordan and coincides with the central part of a wide-angle seismic refraction/reflection line. Near-vertical seismic reflection studies are powerful tools to study the crustal architecture down to the crust/mantle boundary. Although they cannot directly image steeply dipping fault zones, they can give indirect evidence for transform motion by offset reflectors or an abrupt change in reflectivity pattern. Since no seismic reflection profile had crossed the DST before DESERT, important aspects of this transform plate boundary and related crustal structures were not known. Thus this study aimed to resolve the DST's manifestation in both the upper and the lower crust. It was to show, whether the DST penetrates into the mantle and whether it is associated with an offset of the crust/mantle boundary, which is observed at other large strike-slip zones. In this work a short description of the seismic reflection method and the various processing steps is followed by a geological interpretation of the seismic data, taking into account relevant information from other studies. Geological investigations in the area of the NVR profile showed, that the Arava Fault can partly be recognized in the field by small scarps in the Neogene sediments, small pressure ridges or rhomb-shaped grabens. A typical fault zone architecture with a fault gauge, fault-related damage zone, and undeformed host rock, that has been reported from other large fault zones, could not be found. Therefore, as a complementary part to the NVR experiment, which was designed to resolve deeper crustal structures, ASTER (Advanced Spacebourne Thermal Emission and Reflection Radiometer) satellite images were used to analyze surface deformation and determine neotectonic activity. T2 - Structural observations at the southern Dead Sea Transform from seismic reflection data and ASTER satellite images KW - Totes Meer Störungssystem KW - Arava-Störung KW - Naher Osten KW - Tektonik KW - Transformstörung KW - Reflexionsseismik KW - ASTER Satellitendaten KW - Dead Sea Transform KW - Arava Fault KW - Middle East KW - tectonics KW - transform fault KW - strike-slip fault KW - near-vertical seismic reflection KW - ASTER satellite images Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001807 ER - TY - THES A1 - Macaulay, Euan Angus T1 - The orogenic evolution of the Central Kyrgyz Tien Shan T1 - Haben die letzten kaenozoischen klimatischen Verӓnderungen zu erhӧhten Abtragungen im kirgisischen Tien Shan geführt? N2 - Intra-continental mountain belts typically form as a result of tectonic forces associated with distant plate collisions. In general, each mountain belt has a distinctive morphology and orogenic evolution that is highly dependent on the unique distribution and geometries of inherited structures and other crustal weaknesses. In this thesis, I have investigated the complex and irregular Cenozoic orogenic evolution of the Central Kyrgyz Tien Shan in Central Asia, which is presently one of the most active intra-continental mountain belts in the world. This work involved combining a broad array of datasets, including thermochronologic, magnetostratigraphic, sediment provenance and stable isotope data, to identify and date various changes in tectonic deformation, climate and surface processes. Many of these changes are linked and can ultimately be related to regional-scale processes that altered the orogenic evolution of the Central Kyrgyz Tien Shan. The Central Kyrgyz Tien Shan contains a sub-parallel series of structures that were reactivated in the late Cenozoic in response to the tectonic forces associated with the distant India-Eurasia collision. Over time, slip on the various reactivated structures created the succession of mountain ranges and intermontane basins which characterises the modern morphology of the region. In this thesis, new quantitative constraints on the exhumation histories of several mountain ranges have been obtained by using low temperature thermochronological data from 95 samples (zircon (U-Th)/He, apatite fission track and (U-Th)/He). Time-temperature histories derived by modelling the thermochronologic data of individual samples identify at least two stages of Cenozoic cooling in most of the region’s mountain ranges: (1) initially low cooling rates (<1°C/Myr) during the tectonic quiescent period and (2) increased cooling in the late Cenozoic, which occurred diachronously and with variable magnitude in different ranges. This second cooling stage is interpreted to represent increased erosion caused by active deformation, and in many of the sampled mountain ranges, provides the first available constraints on the timing of late Cenozoic deformation. New constraints on the timing of deformation have also been derived from the sedimentary record of intermontane basins. In the intermontane Issyk Kul basin, new magnetostratigraphic data from two sedimentary sections suggests that deposition of the first Cenozoic syn-tectonic sediments commenced at ~26 Ma. Zircon U-Pb provenance data, paleocurrent and conglomerate clast analysis reveals that these sediments were sourced from the Terskey Range to the south of the basin, suggesting that the onset of the late Cenozoic deformation occurred >26 Ma in that particular range. Elsewhere, growth strata relationships are used to identify syn-tecotnic deposition and constrain the timing of nearby deformation. Collectively, these new constraints obtained from thermochronologic and sedimentary data have allowed me to infer the spatiotemporal distribution of deformation in a transect through the Central Kyrgyz Tien Shan, and determine the order in which mountain ranges started deforming. These data suggest that deformation began in a few widely-spaced mountain ranges in the late Oligocene and early Miocene. Typically, these earlier mountain ranges are bounded on at least one side by a reactivated structure, which probably corresponds to the frictionally weakest and most suitably orientated inherited structures for accommodating the roughly north-south directed horizontal crustal shortening of the late Cenozoic. Moreover, tectonically-induced rock uplift in the Terskey Range, following the reactivation of the bounding structure before 26 Ma, likely caused significant surface uplift across the range, which in turn lead to enhanced orographic precipitation. These wetter conditions have been inferred from stable isotope data collected in the two magnetostratigraphically-dated sections in the Issyk Kul basin. Subsequently, in the late Miocene (~12‒5 Ma), more mountain ranges and inherited structures appear to have started actively deforming. Importantly, the onset of deformation at these locations in the late Miocene coincides with an increase in exhumation of ranges that had started deforming earlier in the late Oligocene‒early Miocene. Based on this observation, I have suggested that there must have been an overall increase in the rate of horizontal crustal shortening across the Central Kyrgyz Tien Shan, which likely relates to regional tectonic changes that affected much of Central Asia. Many of the mountain ranges that started deforming in the late Miocene were associated with out-of-sequence tectonic reactivation and initiation, which lead to the partitioning of larger intermontane basins. Moreover, within most of the intermontane basins in the Central Kyrgyz Tien Shan, this inferred late Miocene increase in horizontal crustal shortening occurs roughly at the same time as an increase in sedimentation rates and a significant change sediment composition. Therefore, I have suggested that the overall magnitude of deformational processes increased in the late Miocene, promoting more flexural subsidence in the intermontane basins of the Central Kyrgyz Tien Shan. N2 - Intrakontinentale Gebirge sind typischerweise das Ergebnis tektonischer Kräfte, die auf entfernte Plattenkollisionen beruhen. Im Allgemeinen hat jedes Gebirge sein charakteristisches morphologisches Erscheinungsbild und seine eigene und einzigartige Entstehungsgeschichte, die zum Großteil von der Verteilung und der Geometrie vorgeprägter Strukturen und anderer Schwächzonen innerhalb der Erdkruste abhängt. In der vorliegenden Arbeit habe ich die komplexe känozoische Gebirgsbildung des zentral-kirgisischen Tian Shan Gebirges, eines der weltweit aktivsten intrakontinentalen Gebirge, untersucht. Diese Arbeit kombiniert verschiedenste Datensätze, darunter thermochronologische und magnetostratigraphische Daten, Sedimentprovenienzen und stabile Isotopenzusammensetzungen, um Änderungen der tektonischen Deformationsprozesse sowie Klima- und Oberflächenveränderungen zu erkennen und gegebenenfalls zu datieren. Viele dieser Veränderungen sind eng miteinander verknüpft und können letztendlich auf regionale Prozesse zurückgeführt werden, die die Entwicklung des zentral-kirgisischen Tian Shan beeinflussen. Das Tian Shan Gebirge besteht aus einer subparallelen Folge einzelner Gebirgsrücken und deren Strukturen, welche im späten Känozoikum als Reaktion auf die entfernt stattfindende Indo-Eurasische Kollision reaktiviert wurden. Im Laufe der Zeit haben Deformation und Versatz entlang dieser reaktivierten Strukturen eine Abfolge von individuellen Gebirgszügen und dazwischen liegenden Sedimentbecken geschaffen deren Morphologie prägend für die heutige Region ist. In dieser Arbeit wurden neue quantitative Altersbestimmungen zur Exhumationsgeschichte mehrerer Gebirgszüge durch thermochronologische Auswertungen an 95 Gesteinsproben durchgeführt (ZHe, AFT und AHe). Die aus Modellierungen einzelner thermochronologischer Datensätze gewonnenen Temperaturgeschichten lassen für die meisten untersuchten Gebirgszüge mindestens zwei Abschnitte känozoischer Abkühlung erkennen: (1) anfänglich niedrige Abkühlungsraten (<1°C/Myr) während einer tektonische Ruhephase und (2) stärkere Abkühlung im späten Känozoikum, die in den verschiedenen Gebirgsketten diachron und mit unterschiedlicher Intensität einsetzt. Diese zweite Abkühlungsphase kann durch einen Anstieg der Erosionsraten durch aktive Deformation interpretiert werden und stellt für viele der untersuchten Gebirgszüge die erste verfügbare Alterabschätzung spätkänozoischer Deformation dar. Neue Deformationsalter wurden weiterhin aus den Sedimenten intermontaner Becken gewonnen. Im intermontanen Issyk Kul Becken lassen neue magnetostratigraphische Daten zweier Sedimentabschnitte vermuten, dass die Ablagerung der ersten syntektonischen Sedimente im Känozoikum um ca. 26 Ma begann. Weiterhin zeigen Zirkon-Provenienzen, Paläoströmungsrichtungen sowie Klastenanalysen konglomeratischer Sedimente, dass diese Sedimente aus der Terskey Range südlich des Beckens stammen, was vermuten lässt, dass der Beginn der spätkänozoischen Deformation in diesem Teil des Gebirgszuges älter als 26 Ma ist. In anderen Bereichen wurden sedimentäre Wachstumsstrukturen zur Identifikation syntektonischer Ablagerung herangezogen, um somit den Zeitpunkt nahe gelegener Deformation zu bestimmen. Zusammengenommen haben meine Beobachtungen und Auswertungen ermöglicht, die räumlichen und zeitlichen Deformationsmuster quer durch das zentral-kirgisischen Tian Shan Gebirge zu erschließen um eine zeitliche Abfolge in der Entstehung und Entwicklung einzelner Gebirgszüge zu entwickeln. Meine Daten lassen vermuten, dass die Deformation in einigen wenigen, weit auseinander liegenden Bergketten im Spätoligozän bis Frühmiozän begann. Typischerweise sind diese frühen Gebirgsketten auf mindestens einer Seite an eine reaktivierte Struktur gebunden. Diese sind die wahrscheinlich schwächsten oder am besten orientierten Strukturen, um die annähernd Nord-Süd gerichtete Einengung im späten Känozoikum aufzunehmen. Darüber hinaus ist es sehr wahrscheinlich, dass die tektonische Gesteinshebung innerhalb der Terskey Range, entlang reaktivierter Störungen vor 26 Ma, eine signifikante Topographiezunahme zur Folge hatte. Dies führte höchstwahrscheinlich zur Ausbildung einer orographischen Barriere und der damit verbundenen Verstärkung der Regenfälle im Becken nördlich des Rückens. Diese Bedingungen konnten mithilfe stabiler Isotopenzusammensetzungen entlang der zwei magnetostratigraphisch datierten Sedimentprofile im Issyk Kul Becken nachgewiesen werden. Während des späten Miozäns (~12‒5 Ma) begann zeitnah die aktive Deformation und Heraushebung mehrerer neuer Gebirgsrücken. Wichtig dabei erscheint, dass der Zeitpunkt dieser spätmiozänen Deformation mit einem Exhumationsschub derer Gebirgszüge zusammenfällt, die schon viel früher (Spätoligozän bis Frühmiozän) mit der Deformation begannen. Aufgrund dieser Beobachtungen habe ich vorgeschlagen, dass es einen generellen Anstieg der Einengungsraten im Tian Shan gegeben haben muss, welcher auf regionale tektonische Veränderungen zurückzuführen ist die große Teile Zentralasiens betrafen. Viele der Gebirgsrücken, die initial im späten Miozän herausgehoben wurden, sind durch unsystematische, tektonische Prozesse der Reaktivierung und Initialisierung von Strukturen (out-of-sequence) entstanden, die zur Teilung vormals großer, zusammenhängender Sedimentbecken führte. Darüber hinaus weisen die meisten intermontanen Becken im zentral-kirgisischen Tian Shan, in etwa zur Zeit der beobachteten, verstärkten Einengung im Spätmiozän, ebenfalls erhöhte Sedimentationsraten und eine signifikante Änderung der Sedimentzusammensetzung. Daher vermute ich, dass die allgemeine Intensität der Deformation im Spätmiozän zunahm, was eine tektonische Absenkung (flexural subsidence) in den intermontane Becken des zentral-kirgisischen Tian Shan Gebirges zur Folge hatte. KW - orogenic evolution KW - thermochronology KW - Tien Shan KW - tectonics KW - climate Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-68985 ER - TY - JOUR A1 - Scherler, Dirk A1 - Bookhagen, Bodo A1 - Strecker, Manfred T1 - Tectonic control on Be-10-derived erosion rates in the Garhwal Himalaya, India JF - Journal of geophysical research : Earth surface N2 - Erosion in the Himalaya is responsible for one of the greatest mass redistributions on Earth and has fueled models of feedback loops between climate and tectonics. Although the general trends of erosion across the Himalaya are reasonably well known, the relative importance of factors controlling erosion is less well constrained. Here we present 25 Be-10-derived catchment-averaged erosion rates from the Yamuna catchment in the Garhwal Himalaya, northern India. Tributary erosion rates range between similar to 0.1 and 0.5mmyr(-1) in the Lesser Himalaya and similar to 1 and 2mmyr(-1) in the High Himalaya, despite uniform hillslope angles. The erosion-rate data correlate with catchment-averaged values of 5 km radius relief, channel steepness indices, and specific stream power but to varying degrees of nonlinearity. Similar nonlinear relationships and coefficients of determination suggest that topographic steepness is the major control on the spatial variability of erosion and that twofold to threefold differences in annual runoff are of minor importance in this area. Instead, the spatial distribution of erosion in the study area is consistent with a tectonic model in which the rock uplift pattern is largely controlled by the shortening rate and the geometry of the Main Himalayan Thrust fault (MHT). Our data support a shallow dip of the MHT underneath the Lesser Himalaya, followed by a midcrustal ramp underneath the High Himalaya, as indicated by geophysical data. Finally, analysis of sample results from larger main stem rivers indicates significant variability of Be-10-derived erosion rates, possibly related to nonproportional sediment supply from different tributaries and incomplete mixing in main stem channels. KW - Himalaya KW - erosion KW - tectonics KW - cosmogenic nuclides KW - channel steepness KW - stream power Y1 - 2014 U6 - https://doi.org/10.1002/2013JF002955 SN - 2169-9003 SN - 2169-9011 VL - 119 IS - 2 SP - 83 EP - 105 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Hoke, Gregory D. A1 - Giambiagi, Laura B. A1 - Garzione, Carmala N. A1 - Mahoney, J. Brian A1 - Strecker, Manfred T1 - Neogene paleoelevation of intermontane basins in a narrow, compressional mountain range, southern Central Andes of Argentina JF - Earth & planetary science letters KW - Neogene KW - Andes KW - surface uplift KW - tectonics KW - paleoelevation Y1 - 2014 U6 - https://doi.org/10.1016/j.epsl.2014.08.032 SN - 0012-821X SN - 1385-013X VL - 406 SP - 153 EP - 164 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Schröder, Sarah T1 - Modelling surface evolution coupled with tectonics T1 - Modellierung von Oberflächenprozessen gekoppelt mit Tektonik BT - A case study for the Pamir BT - Eine Fallstudie zum Pamir N2 - This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west. N2 - Im Rahmen dieser Studie werden 1D und 2D Erosionsmodelle im Gebirgsmaßstab implementiert und mit Modellen für tektonische Deformation gekoppelt. Die Kopplungsmethode erlaubt unterschiedlich räumliche und zeitliche Auflösungen im tektonischen und im Erosionsmodell. Es werden sowohl vertikale als auch horizontale Bewegungen zwischen den Modellen transferiert. Darüber hinaus enthält die Kopplungsmethode ein Glättungsverfahren, um eventuelle Instabilitäten des tektonischen Modelles zu kompensieren. Beide Erosionsmodelle beziehen Hangerosion, Flusseinschneidung und Sedimentation ein. Der 1D Code nutzt Hack's Law, um die Wassermengen zu berechnen. Er garantiert Massenerhaltung, indem er Sedimente in Senken speichert. Das 2D Erosionsmodell DANSER basiert auf einem zellulären Automaten. Ein zusätzlicher steigungsabhängiger Faktor erweitert lineare zu nichtlinearer Diffusion. Wassermengen werden mit Hilfe des D8-Algorithmus und einer veränderten Form von O'Callaghans (1984) Algorithmus akkumuliert. Laterale Einschneidung, berechnet durch einen neuen Verteilungs-Algorithmus, verbessert die Modellierung von Flusssystemen. Flüsse sind dabei repräsentiert durch eine unterschiedliche Anzahl an Zellen orthogonal zur Fließrichtung. Ihre Breite wird nach empirischen Gesetzen ermittelt. Die präsentierten Anwendungen dienen der Studie des Pamirgebirges. Zunächst werden die Modellparameter anhand von Einschneidungs- und Erosionsraten sowie Sedimentdurchflüssen kalibriert. Ein digitales Höhenmodell dient als Anfangstopographie und zur Extraktion von Flussprofilen. Laterale Einschneidung zeigt eine deutliche Verbesserung zu bisher vorhandenen Modellen. Sie ermöglicht die Erhaltung der Flussbreite und zeigt hohe Einschneidungsraten in engen Flusspassagen. Modelle von Flussanzapfungen in einem System paralleler Verwerfungen bestätigen die Wichtigkeit von lateraler Einschneidung für Flussanzapfungsmodelle, die Hangerosion einbeziehen. Während die Modelle eine geringe Wahrscheinlichkeit von Flussanzapfungen mit hohem Ablenkungswinkel zeigen, belegen sie auch, dass deren (allgemeine) Wahrscheinlichkeit direkt von der Hebungsrate der Verwerfungen abhängt. Die Erodibilität beschleunigt lediglich die Geschwindigkeit von Flussanzapfungen. Ein Modell, das die Codes SLIM 3D und DANSER koppelt, dokumentiert die vielseitige Verwendbarkeit des neuen Codes: Es zeigt einen geringen Einfluss von Oberflächenprozessen auf die Lithosphärendeformation, während die Sedimentationsroutine erheblich auf spröde Oberflächendeformationen einwirkt. Das Modell legt nahe, dass Sedimentation ein zwischen zwei entstehenden Gebirgen gelegenes Becken weitet. Außerdem weitet sich der südlich von der interkontinentalen Kollisionszone gelegene Teil des Gebirge-Models ebenfalls durch Sedimentation. KW - erosion KW - coupling KW - SEC KW - surface evolution KW - thermo-mechanics KW - surface processes KW - DANSER KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - tectonics KW - modelling KW - modeling KW - numerical model KW - simulation KW - surface KW - fluvial incision KW - hillslope diffusion KW - finite differences KW - finite elements KW - Eulerian grid KW - DANSER KW - DANSER KW - Erosion KW - Modellierung KW - Tektonik KW - Koppelung KW - SEC KW - numerische Modellierung KW - Oberflächenprozesse KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - Tiefendeformation KW - Software KW - Simulation KW - Oberfläche KW - fluviale Einschneidung KW - Hangerosion KW - finite Differenzen KW - finite Elemente KW - Eulerische Gitter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90385 ER - TY - JOUR A1 - Forte, Adam M. A1 - Whipple, Kelin X. A1 - Bookhagen, Bodo A1 - Rossi, Matthew W. T1 - Decoupling of modern shortening rates, climate, and topography in the Caucasus JF - Earth & planetary science letters N2 - The Greater and Lesser Caucasus mountains and their associated foreland basins contain similar rock types, experience a similar two-fold, along-strike variation in mean annual precipitation, and were affected by extreme base-level drops of the neighboring Caspian Sea. However, the two Caucasus ranges are characterized by decidedly different tectonic regimes and rates of deformation that are subject to moderate (less than an order of magnitude) gradients in climate, and thus allow for a unique opportunity to isolate the effects of climate and tectonics in the evolution of topography within active orogens. There is an apparent disconnect between modern climate, shortening rates, and topography of both the Greater Caucasus and Lesser Caucasus which exhibit remarkably similar topography along-strike despite the gradients in forcing. By combining multiple datasets, we examine plausible causes for this disconnect by presenting a detailed analysis of the topography of both ranges utilizing established relationships between catchment-mean erosion rates and topography (local relief, hillslope gradients, and channel steepness) and combining it with a synthesis of previously published low-temperature thermochronologic data. Modern climate of the Caucasus region is assessed through an analysis of remotely-sensed data (TRMM and MODIS) and historical streamflow data. Because along-strike variation in either erosional efficiency or thickness of accreted material fail to explain our observations, we suggest that the topography of both the western Lesser and Greater Caucasus are partially supported by different geodynamic forces. In the western Lesser Caucasus, high relief portions of the landscape likely reflect uplift related to ongoing mantle lithosphere delamination beneath the neighboring East Anatolian Plateau. In the Greater Caucasus, maintenance of high topography in the western portion of the range despite extremely low (<2-4 mm/y) modern convergence rates may be related to dynamic topography from detachment of the north-directed Greater Caucasus slab or to a recent slowing of convergence rates. Large-scale spatial gradients in climate are not reflected in the topography of the Caucasus and do not seem to exert any significant control on the tectonics or structure of either range. (C) 2016 Elsevier B.V. All rights reserved. KW - tectonics KW - erosion KW - climate KW - dynamic topography KW - orogenic processes Y1 - 2016 U6 - https://doi.org/10.1016/j.epsl.2016.06.013 SN - 0012-821X SN - 1385-013X VL - 449 SP - 282 EP - 294 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Bande, Alejandro T1 - The tectonic evolution of the western Tien Shan T1 - Die tektonische Entwicklung des westlichen Tien Shan N2 - Intracontinental deformation usually is a result of tectonic forces associated with distant plate collisions. In general, the evolution of mountain ranges and basins in this environment is strongly controlled by the distribution and geometries of preexisting structures. Thus, predictive models usually fail in forecasting the deformation evolution in these kinds of settings. Detailed information on each range and basin-fill is vital to comprehend the evolution of intracontinental mountain belts and basins. In this dissertation, I have investigated the complex Cenozoic tectonic evolution of the western Tien Shan in Central Asia, which is one of the most active intracontinental ranges in the world. The work presented here combines a broad array of datasets, including thermo- and geochronology, paleoenvironmental interpretations, sediment provenance and subsurface interpretations in order to track changes in tectonic deformation. Most of the identified changes are connected and can be related to regional-scale processes that governed the evolution of the western Tien Shan. The NW-SE trending Talas-Fergana fault (TFF) separates the western from the central Tien Shan and constitutes a world-class example of the influence of preexisting anisotropies on the subsequent structural development of a contractile orogen. While to the east most of ranges and basins have a sub-parallel E-W trend, the triangular-shaped Fergana basin forms a substantial feature in the western Tien Shan morphology with ranges on all three sides. In this thesis, I present 55 new thermochronologic ages (apatite fission track and zircon (U-Th)/He)) used to constrain exhumation histories of several mountain ranges in the western Tien Shan. At the same time, I analyzed the Fergana basin-fill looking for progressive changes in sedimentary paleoenvironments, source areas and stratal geometrical configurations in the subsurface and outcrops. The data presented in this thesis suggests that low cooling rates (<1°C Myr-1), calm depositional environments, and low depositional rates (<10 m Myr-1) were widely distributed across the western Tien Shan, describing a quiescent tectonic period throughout the Paleogene. Increased cooling rates in the late Cenozoic occurred diachronously and with variable magnitudes in different ranges. This rapid cooling stage is interpreted to represent increased erosion caused by active deformation and constrains the onset of Cenozoic deformation in the western Tien Shan. Time-temperature histories derived from the northwestern Tien Shan samples show an increase in cooling rates by ~25 Ma. This event is correlated with a synchronous pulse iv in the South Tien Shan. I suggest that strike-slip motion along the TFF commenced at the Oligo-Miocene boundary, facilitating CCW rotation of the Fergana basin and enabling exhumation of the linked horsetail splays. Higher depositional rates (~150 m Myr-1) in the Oligo-Miocene section (Massaget Fm.) of the Fergana basin suggest synchronous deformation in the surrounding ranges. The central Alai Range also experienced rapid cooling around this time, suggesting that the onset of intramontane basin fragmentation and isolation is coeval. These results point to deformation starting simultaneously in the late Oligocene – early Miocene in geographically distant mountain ranges. I suggest that these early uplifts are controlled by reactivated structures (like the TFF), which are probably the frictionally weakest and most-suitably oriented for accommodating and transferring N-S horizontal shortening along the western Tien Shan. Afterwards, in the late Miocene (~10 Ma), a period of renewed rapid cooling affected the Tien Shan and most mountain ranges and inherited structures started to actively deform. This episode is widely distributed and an increase in exhumation is interpreted in most of the sampled ranges. Moreover, the Pliocene section in the basin subsurface shows the higher depositional rates (>180 m Myr-1) and higher energy facies. The deformation and exhumation increase further contributed to intramontane basin partitioning. Overall, the interpretation is that the Tien Shan and much of Central Asia suffered a global increase in the rate of horizontal crustal shortening. Previously, stress transfer along the rigid Tarim block or Pamir indentation has been proposed to account for Himalayan hinterland deformation. However, the extent of the episode requires a different and broader geodynamic driver. N2 - Intra-kontinentale Deformation der Erdkruste ist in der Regel das Ergebnis weitreichender tektonischer Kräfte, die durch Interaktion der Erdplatten an entfernten Kontinentalrändern entstehen. Eine entscheidende Rolle bei der Entwicklungsgeschichte der so entstehenden Gebirge, spielt das Vorhandensein und die Orientierung präexistierender Strukturen in der Kruste. Diese Komplexität lässt bekannte Vorhersagemodelle zur Bestimmung der Deformationsgeschichte häufig scheitern. Um die Deformationsprozesse intra-kontinentaler Gebiete dennoch besser zu verstehen, sind detaillierte Informationen über die Entstehungsgeschichte einzelner Bergketten und benachbarter Becken von essentieller Bedeutung. Die vorliegende Arbeit beschäftigt sich mit der känozoischen Entwicklung tektonischer Prozesse in einer der aktivsten intra-kontinentalen Gebirgsketten der Welt, dem westlichen Tian Shan Gebirge in Zentralasien. Um räumliche und zeitliche Veränderungen der tektonischen Deformation besser nachvollziehen zu können, wird in dieser Arbeit ein breites Spektrum an Datensätzen, aus Thermo- und Geochronologie, Paläoumwelt-Interpretation, Sediment-Provenienz und der Interpretationen seismischer Profile, kombiniert. Die somit identifizierten Prozesse deuten auf einen engen Bezug und können mit regional übergreifenden Prozessen in Beziehung gesetzt werden, die für die Entwicklung des westlichen Tian Shan Gebirges verantwortlich sind. Ein Paradebeispiel des Einflusses präexistierender Krustenanomalien auf die strukturelle Entstehung eines intra-kontinentalen Gebirges wie dem Tian Shan ist die NW-SE streichende Talas-Fergana-Störung, die den westlichen vom zentralen Tian Shan trennt. Während der östlich gelegene Zentralbereich des Orogens durch subparallele, E-W streichende Gebirgszüge und Becken charakterisiert ist, ist das markant dreieckförmige Fergana-Becken im westlichen Tian Shan von allen Seiten durch hohe Gebirgsrücken flankiert. Kern dieser Arbeit sind 55 neue thermochronologische Altersdatierungen (aus Apatit-Spaltspuren-Analyse und U-Th/He an Zirkonen), mit deren Hilfe die Exhumationsgeschichte mehrerer Gebirgszüge im westlichen Tian Shan untersucht wurde. Des Weiteren wurde die sedimentäre Beckenfüllung des benachbarten Fergana-Beckens auf sukzessive Veränderungen der Paläoumweltbedingungen, der Sediment-Provenienz und der geometrischen Konfiguration der Sedimente, am Aufschluss und im Untergrund untersucht. Ergebnisse dieser Arbeit zeigen niedrige Abkühlungs- (<1°C Myr-1) und Sedimentationsraten (<10 m Myr-1) im Gebiet des westlichen Tian Shan im Paläogen und deuten auf eine tektonisch ruhige und relativ stabile Region. Demgegenüber stehen erhöhte Abkühlungsraten im späten Känozoikum, die in den verschiedenen Gebirgsketten diachron und mit unterschiedlicher Intensität einsetzen. Diese zweite Phase deutet auf erhöhte Erosionsprozesse, hervorgerufen durch aktive Deformation, und markiert den Beginn der känozoischen Deformation im westlichen Tian Shan Gebirge. Temperaturgeschichten im Gebiet des NW Tian Shan zeigen erhöhte Abkühlungsraten vor ~25 Ma und korrelieren zeitlich mit ähnlichen Ereignissen im südlichen Tian Shan. Ich vermute, dass Horizontalverschiebungen entlang der Talas-Fergana-Störung an der Oligozän-Miozän-Grenze zur Rotation des Fergana-Beckens gegen den Uhrzeigersinn, und darüber hinaus zur Exhumation entlang diverser Nebenstörungen führten. Erhöhte Sedimentationsraten (~150 m Myr-1) der Oligo-Miozänen Einheiten im Fergana Becken (Massaget Fm.) deuten ebenfalls auf eine synchrone Deformationsphase umliegender Gebieten zu dieser Zeit. Dies ist durch erhöhte Abkühlungsraten im zentralen Alai (südlich des Fergana Beckens) gut dokumentiert und impliziert, dass die intra-montane Fragmentierung und Isolierung, der ehemals zusammenhängenden Sedimentbecken, zur gleichen Zeit erfolgte. Diese Beobachtungen deuten auf eine Deformationsgeschichte hin, die zeitgleich ihren Ursprung in zwei voneinander entfernten Regionen hat. Diese frühen Hebungen scheinen durch reaktivierte Strukturen (wie der Talas-Fergana-Störung) gesteuert worden zu sein, deren Orientierung optimal für eine N-S Einengung im Bereich des westlichen Tian Shan geeignet ist. Eine erneute Phase schneller Abkühlung im späten Miozän (~10 Ma) führte zur Aktivierung der meisten heutigen Gebirgszüge und der Reaktivierung prä-existierender Strukturen. Diese Deformationsphase zeigt eine weite Verbreitung und einen Anstieg der Exhumationsraten in den meisten beprobten Bereichen. Darüberhinaus steigen die pliozänen Sedimentationsraten (>180 m Myr-1) im Fergana-Becken und die Faziesanalyse der Sedimente zeigt hoch-energetische Ablagerungsbedingungen. Fazit dieser Arbeit ist, dass der Tian Shan und ein Großteil Zentralasiens durch erhöhte Verkürzungsraten der Kruste stark beeinflusst wurden. Früher ging man davon aus, dass Stresstransfer entlang des stabilen Tarim-Blocks oder die Indentation des Pamir-Gebirges zur Deformation im Hinterland des Himalaya führten. Die beobachteten Deformationsmuster deuten jedoch auf einen anderen, viel weitreichenderen geodynamischen Prozess hin. KW - tectonics KW - Tien Shan KW - thermochronology KW - Tektonik KW - Tien Shan KW - Thermochronologie Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398933 ER - TY - JOUR A1 - von Specht, Sebastian A1 - Heidbach, Oliver A1 - Cotton, Fabrice Pierre A1 - Zang, Arno T1 - Uncertainty reduction of stress tensor inversion with data-driven catalogue selection JF - Geophysical journal international N2 - The selection of earthquake focal mechanisms (FMs) for stress tensor inversion (STI) is commonly done on a spatial basis, that is, hypocentres. However, this selection approach may include data that are undesired, for example, by mixing events that are caused by different stress tensors when for the STI a single stress tensor is assumed. Due to the significant increase of FM data in the past decades, objective data-driven data selection is feasible, allowing more refined FM catalogues that avoid these issues and provide data weights for the STI routines. We present the application of angular classification with expectation-maximization (ACE) as a tool for data selection. ACE identifies clusters of FM without a priori information. The identified clusters can be used for the classification of the style-of-faulting and as weights of the FM data. We demonstrate that ACE effectively selects data that can be associated with a single stress tensor. Two application examples are given for weighted STI from South America. We use the resulting clusters and weights as a priori information for an STI for these regions and show that uncertainties of the stress tensor estimates are reduced significantly. KW - Inverse Theory KW - Statistical Methods KW - Seismicity KW - tectonics KW - Kinematics of crustal KW - mantle deformation Y1 - 2018 U6 - https://doi.org/10.1093/gji/ggy240 SN - 0956-540X SN - 1365-246X VL - 214 IS - 3 SP - 2250 EP - 2263 PB - Oxford Univ. Press CY - Oxford ER - TY - THES A1 - Zapata, Sebastian Henao T1 - Paleozoic to Pliocene evolution of the Andean retroarc between 26 and 28°S: interactions between tectonics, climate, and upper plate architecture T1 - Paläozoische bis pliozäne Entwicklung des andinen Randbeckens zwischen 26 und 28° Süd: Interaktion von Tektonik, Klima und Architektur der kontinentalen Kruste BT - interactions between tectonics, climate, and upper plate architecture N2 - Interactions and feedbacks between tectonics, climate, and upper plate architecture control basin geometry, relief, and depositional systems. The Andes is part of a longlived continental margin characterized by multiple tectonic cycles which have strongly modified the Andean upper plate architecture. In the Andean retroarc, spatiotemporal variations in the structure of the upper plate and tectonic regimes have resulted in marked along-strike variations in basin geometry, stratigraphy, deformational style, and mountain belt morphology. These along-strike variations include high-elevation plateaus (Altiplano and Puna) associated with a thin-skin fold-and-thrust-belt and thick-skin deformation in broken foreland basins such as the Santa Barbara system and the Sierras Pampeanas. At the confluence of the Puna Plateau, the Santa Barbara system and the Sierras Pampeanas, major along-strike changes in upper plate architecture, mountain belt morphology, basement exhumation, and deformation style can be recognized. I have used a source to sink approach to unravel the spatiotemporal tectonic evolution of the Andean retroarc between 26 and 28°S. I obtained a large low-temperature thermochronology data set from basement units which includes apatite fission track, apatite U-Th-Sm/He, and zircon U-Th/He (ZHe) cooling ages. Stratigraphic descriptions of Miocene units were temporally constrained by U-Pb LA-ICP-MS zircon ages from interbedded pyroclastic material. Modeled ZHe ages suggest that the basement of the study area was exhumed during the Famatinian orogeny (550-450 Ma), followed by a period of relative tectonic quiescence during the Paleozoic and the Triassic. The basement experienced horst exhumation during the Cretaceous development of the Salta rift. After initial exhumation, deposition of thick Cretaceous syn-rift strata caused reheating of several basement blocks within the Santa Barbara system. During the Eocene-Oligocene, the Andean compressional setting was responsible for the exhumation of several disconnected basement blocks. These exhumed blocks were separated by areas of low relief, in which humid climate and low erosion rates facilitated the development of etchplains on the crystalline basement. The exhumed basement blocks formed an Eocene to Oligocene broken foreland basin in the back-bulge depozone of the Andean foreland. During the Early Miocene, foreland basin strata filled up the preexisting Paleogene topography. The basement blocks in lower relief positions were reheated; associated geothermal gradients were higher than 25°C/km. Miocene volcanism was responsible for lateral variations on the amount of reheating along the Campo-Arenal basin. Around 12 Ma, a new deformational phase modified the drainage network and fragmented the lacustrine system. As deformation and rock uplift continued, the easily eroded sedimentary cover was efficiently removed and reworked by an ephemeral fluvial system, preventing the development of significant relief. After ~6 Ma, the low erodibility of the basement blocks which began to be exposed caused relief increase, leading to the development of stable fluvial systems. Progressive relief development modified atmospheric circulation, creating a rainfall gradient. After 3 Ma, orographic rainfall and high relief lead to the development of proximal fluvial-gravitational depositional systems in the surrounding basins. N2 - Die Wechselwirkungen zwischen Tektonik, Klima und dem Aufbau der Oberkruste beeinflussen Relief, Beckengeometrien und sedimentäre Systeme. Die geologische Geschichte der Anden ist durch wiederkehrende tektonische Zyklen gekennzeichnet, die nachhaltig den Aufbau der umliegenden Oberkruste geprägt haben. Im Vorlandbecken der Anden (Retro-Arc Typus) führten räumlich und zeitlich variierende strukturgeologische Prozesse in der Oberkruste zu diversen Beckengeometrien, Deformationsvorgängen, sowie stratigraphische und geomorphologische Markern entlang des Streichens des Hochgebirgszuges. Die räumliche Variation beinhaltet unter anderem Hochgebirgsplateaus wie dem Altiplano oder der Puna, die jeweils mit dem thin-skin Aufschiebungsgürtel oder der thick-skin Deformation des zerbrochenen Vorlands im Santa-Barbara-System, bzw. der Sierras Pampeanas assoziiert werden. Besonders am Tripelpunkt zwischen der Puna Plateau, dem Santa-Barbara-System und der Sierras Pampeanas werden deutliche Veränderungen in der Oberkrustenarchitektur, der Oberflächenbeschaffenheit, der dominierenden Deformationsprozesse und der Heraushebung des Grundgebirges ersichtlich. Ich habe einen Quelle-zu-Senke Ansatz genutzt, um die räumliche und zeitliche tektonische Entwicklung der zentralen Ostanden zwischen 26° und 28°S aufzudecken. Dabei habe ich einen umfangreichen Niedertemperaturdatensatz aus Gesteinen des Grundgebirges gewonnen, welche folgende Methoden mit einschließen: Apatit Spaltspur Methode (apatite fission Track, AFT), Apatit U-Th-Sm/He (AHe), und Zirkon U-Th/He (Zhe) Abkühlalter. Für die stratigraphische Besprechung und die exakte Altersbestimmung der Einheiten des Miozäns wurden U-Pb ICP-MS-LA Zirkonalter aus pyroklastisch zwischengelagerten Materialien genutzt. Die modellierten ZHe Altersdatierungen legen den Schluss nahe, dass das Grundgebirge im Untersuchungsgebiet während der Famatinischen Orogenese (vor 550-450 Ma) herausgehoben wurde, woraufhin im Paläozoikum und dem Trias eine Phase von tektonischer Ruhe folgte. Während der Kreide und dem einsetzenden Salta Rift wurde das Grundgebirge in Form von Horststrukturen freigelegt. Nach der ersten Freilegung wurden einige Grundgebirgsblöcke wieder erwärmt durch die rift-parallele Grabenverfüllung im Santa-Barbara-System. Während dem Eozän und dem Oligozän ist der Übergang in ein kompressives Stressregime verantwortlich für die Heraushebung mehrerer losgelöster Grundgebirgszüge. Diese freigelegten Blöcke entstanden zeitgleich wie Gebiete mit flachem Relief, wo feuchtes Klima und geringe Erosionsraten die Herausbildung von „etchplains“ im kristallinem Grundgebirge ermöglichen. Weiterhin durchbrechen diese Gebirgsblöcke das Vorlandbecken, welches sich im Depozentrum des back-bulges der Anden herausgebildet hat. Während des frühen Miozäns füllten Vorlandbeckensedimente die vorher vorhandene paläogene Topographie. Die Grundgebirgsblöcke mit niedrigem Relief wurden wieder erwärmt und wiesen einen Temperaturgradienten von mehr als 25°C/km auf. Der Vulkanismus im Miozän war verantwortlich für laterale Variationen der Intensität der erneuten Erwärmung innerhalb des Campo-Arenal Beckens. Vor etwa 12 Ma modifizierte eine neue Deformationsphase das Abflussnetz und zerstückelte das lakustrische System. Während die Deformation und die Gebirgsbildung anhielt, wurden überlagernde Sedimentschichten einfach erodiert, effizient beseitigt und durch fluviale Prozesse umgelagert, die die weitere Herausbildung von Relief verhinderten. Nach ~6 Ma ermöglichte die geringe Erodierbarkeit des Grundgebirges deren Reliefzunahme, wodurch sich stabile fluviale Systeme herausbildeten. Möglicherweise unterbrach die fortschreitende Reliefzunahme atmosphärische Zirkulationsprozesse, sodass sich laterale Niederschlagsgradienten ausbildeten. Nach 3 Ma führten orographische Niederschlagsbarrieren zu der Entwicklung von nahe liegenden fluvial-gravitationalen Ablagerungssystemen in den umliegenden Becken. KW - climate KW - tectonics KW - Andes KW - inherited structures KW - Klima KW - Tektonik KW - Anden KW - ererbte Strukturen Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439036 ER - TY - JOUR A1 - Scherler, Dirk A1 - Schwanghart, Wolfgang T1 - Drainage divide networks BT - Part 2: Response to perturbations JF - Earth surface dynamics N2 - Drainage divides are organized into tree-like networks that may record information about drainage divide mobility. However, views diverge about how to best assess divide mobility. Here, we apply a new approach of automatically extracting and ordering drainage divide networks from digital elevation models to results from landscape evolution model experiments. We compared landscapes perturbed by strike-slip faulting and spatiotemporal variations in erodibility to a reference model to assess which topographic metrics (hillslope relief, flow distance, and chi) are diagnostic of divide mobility. Results show that divide segments that are a minimum distance of similar to 5 km from river confluences strive to attain constant values of hillslope relief and flow distance to the nearest stream. Disruptions of such patterns can be related to mobile divides that are lower than stable divides, closer to streams, and often asymmetric in shape. In general, we observe that drainage divides high up in the network, i.e., at great distances from river confluences, are more susceptible to disruptions than divides closer to these confluences and are thus more likely to record disturbance for a longer time period. We found that across-divide differences in hillslope relief proved more useful for assessing divide migration than other tested metrics. However, even stable drainage divide networks exhibit across-divide differences in any of the studied topographic metrics. Finally, we propose a new metric to quantify the connectivity of divide junctions. KW - dynamics KW - landscape evolution KW - low-relief KW - patterns KW - river KW - scale KW - tectonics Y1 - 2020 U6 - https://doi.org/10.5194/esurf-8-261-2020 SN - 2196-6311 SN - 2196-632X VL - 8 IS - 2 SP - 261 EP - 274 PB - Copernicus CY - Göttingen ER -