TY - JOUR A1 - Badalyan, Artavazd A1 - Dierich, Marlen A1 - Stiba, Konstanze A1 - Schwuchow, Viola A1 - Leimkühler, Silke A1 - Wollenberger, Ulla T1 - Electrical wiring of the aldehyde oxidoreductase PaoABC with a polymer containing osmium redox centers BT - biosensors for benzaldehyde and GABA JF - Biosensors N2 - Biosensors for the detection of benzaldehyde and g-aminobutyric acid (GABA) are reported using aldehyde oxidoreductase PaoABC from Escherichia coli immobilized in a polymer containing bound low potential osmium redox complexes. The electrically connected enzyme already electrooxidizes benzaldehyde at potentials below −0.15 V (vs. Ag|AgCl, 1 M KCl). The pH-dependence of benzaldehyde oxidation can be strongly influenced by the ionic strength. The effect is similar with the soluble osmium redox complex and therefore indicates a clear electrostatic effect on the bioelectrocatalytic efficiency of PaoABC in the osmium containing redox polymer. At lower ionic strength, the pH-optimum is high and can be switched to low pH-values at high ionic strength. This offers biosensing at high and low pH-values. A “reagentless” biosensor has been formed with enzyme wired onto a screen-printed electrode in a flow cell device. The response time to addition of benzaldehyde is 30 s, and the measuring range is between 10–150 µM and the detection limit of 5 µM (signal to noise ratio 3:1) of benzaldehyde. The relative standard deviation in a series (n = 13) for 200 µM benzaldehyde is 1.9%. For the biosensor, a response to succinic semialdehyde was also identified. Based on this response and the ability to work at high pH a biosensor for GABA is proposed by coimmobilizing GABA-aminotransferase (GABA-T) and PaoABC in the osmium containing redox polymer. KW - redox polymer KW - aldehyde oxidoreductase KW - ionic strength KW - benzaldehyde KW - GABA KW - biosensor Y1 - 2014 U6 - https://doi.org/10.3390/bios4040403 VL - 4 IS - 4 SP - 403 EP - 421 PB - MDPI CY - Basel ER - TY - GEN A1 - Badalyan, Artavazd A1 - Dierich, Marlen A1 - Stiba, Konstanze A1 - Schwuchow, Viola A1 - Leimkühler, Silke A1 - Wollenberger, Ulla T1 - Electrical wiring of the aldehyde oxidoreductase PaoABC with a polymer containing osmium redox centers BT - biosensors for benzaldehyde and GABA T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Biosensors for the detection of benzaldehyde and g-aminobutyric acid (GABA) are reported using aldehyde oxidoreductase PaoABC from Escherichia coli immobilized in a polymer containing bound low potential osmium redox complexes. The electrically connected enzyme already electrooxidizes benzaldehyde at potentials below −0.15 V (vs. Ag|AgCl, 1 M KCl). The pH-dependence of benzaldehyde oxidation can be strongly influenced by the ionic strength. The effect is similar with the soluble osmium redox complex and therefore indicates a clear electrostatic effect on the bioelectrocatalytic efficiency of PaoABC in the osmium containing redox polymer. At lower ionic strength, the pH-optimum is high and can be switched to low pH-values at high ionic strength. This offers biosensing at high and low pH-values. A “reagentless” biosensor has been formed with enzyme wired onto a screen-printed electrode in a flow cell device. The response time to addition of benzaldehyde is 30 s, and the measuring range is between 10–150 µM and the detection limit of 5 µM (signal to noise ratio 3:1) of benzaldehyde. The relative standard deviation in a series (n = 13) for 200 µM benzaldehyde is 1.9%. For the biosensor, a response to succinic semialdehyde was also identified. Based on this response and the ability to work at high pH a biosensor for GABA is proposed by coimmobilizing GABA-aminotransferase (GABA-T) and PaoABC in the osmium containing redox polymer. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1082 KW - redox polymer KW - aldehyde oxidoreductase KW - ionic strength KW - benzaldehyde KW - GABA KW - biosensor Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-475070 SN - 1866-8372 IS - 1082 ER - TY - JOUR A1 - Cywinski, Piotr J. A1 - Hammann, Tommy A1 - Huehn, Dominik A1 - Parak, Wolfgang J. A1 - Hildebrandt, Niko A1 - Löhmannsröben, Hans-Gerd T1 - Europium-quantum dot nanobioconjugates as luminescent probes for time-gated biosensing JF - Journal of biomedical optics N2 - Nanobioconjugates have been synthesized using cadmium selenide quantum dots (QDs), europium complexes (EuCs), and biotin. In those conjugates, long-lived photoluminescence (PL) is provided by the europium complexes, which efficiently transfer energy via Forster resonance energy transfer (FRET) to the QDs in close spatial proximity. As a result, the conjugates have a PL emission spectrum characteristic for QDs combined with the long PL decay time characteristic for EuCs. The nanobioconjugates synthesis strategy and photo-physical properties are described as well as their performance in a time-resolved streptavidin-biotin PL assay. In order to prepare the QD-EuC-biotin conjugates, first an amphiphilic polymer has been functionalized with the EuC and biotin. Then, the polymer has been brought onto the surface of the QDs (either QD655 or QD705) to provide functionality and to make the QDs water dispersible. Due to a short distance between EuC and QD, an efficient FRET can be observed. Additionally, the QD-EuC-biotin conjugates' functionality has been demonstrated in a PL assay yielding good signal discrimination, both from autofluorescence and directly excited QDs. These newly designed QD-EuC-biotin conjugates expand the class of highly sensitive tools for bioanalytical optical detection methods for diagnostic and imaging applications. (C) 2014 Society of Photo-Optical Instrumentation Engineers (SPIE) KW - quantum dots KW - europium complex KW - amphiphilic polymer assembly KW - nanobioconjugate KW - biosensor KW - time-resolved fluorescence Y1 - 2014 U6 - https://doi.org/10.1117/1.JBO.19.10.101506 SN - 1083-3668 SN - 1560-2281 VL - 19 IS - 10 PB - SPIE CY - Bellingham ER - TY - JOUR A1 - Dongmo, Saustin A1 - Leyk, Janina A1 - Dosche, Carsten A1 - Richter-Landsberg, Christiane A1 - Wollenberger, Ursula A1 - Wittstock, Gunther T1 - Electrogeneration of O-2(center dot-) and H2O2 Using Polymer-modified Microelectrodes in the Environment of Living Cells JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis N2 - Microelectrodes modified with electropolymerized plumbagin (PLG) were used for the generation of superoxide radical (O-2(center dot-)) and hydrogen peroxide (H2O2) during oxygen reduction reaction (ORR) in an aqueous medium, specifically in serum-free cell culture media. This is enabled by the specific design of a polymer film on the microelectrode. The generation and diffusion of O-2(center dot-) during electrocatalytic ORR at a positionable PLG polymer-modified microelectrode was followed by fluorescence microscopy with the selective dye 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) and by amperometric detection using a cytochrome c-modified electrode at + 0.13 V. H2O2 production, either by direct oxygen reduction or as product of O-2(center dot-) disproportionation, was monitored by the reaction with Amplex UltraRed. The PLG polymer-modified microelectrodes were used to expose mammalian B6-RPE07 retinal cells to defined local fluxes of reactive oxygen species (ROS), and cellular responses and morphological alterations were observed. The use of a controllable source of ROS opens many possibilities to study how living cells respond to the presence of a certain flux of specific ROS. KW - reactive oxygen species KW - microelectrode KW - scanning electrochemical microscopy KW - biosensor KW - polymer-modified electrode KW - oxygen reduction reaction Y1 - 2016 U6 - https://doi.org/10.1002/elan.201600267 SN - 1040-0397 SN - 1521-4109 VL - 28 SP - 2400 EP - 2407 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Fandrich, Artur T1 - Untersuchung des Verhaltens von thermoresponsiven Polymeren auf Elektroden in Interaktion mit biomolekularen Systemen T1 - Investigation of the behavior of thermoresponsive polymers on electrodes in interaction with biomolecular systems N2 - Diese Arbeit befasst sich mit der Herstellung und Charakterisierung von thermoresponsiven Filmen auf Goldelektroden durch Fixierung eines bereits synthetisierten thermoresponsiven Polymers. Als Basis für die Entwicklung der responsiven Grenzfläche dienten drei unterschiedliche Copolymere (Polymere I, II und III) aus der Gruppe der thermisch schaltbaren Poly(oligo(ethylenglykol)methacrylate). Die turbidimetrischen Messungen der Copolymere in Lösungen haben gezeigt, dass der Trübungspunkt vom pH-Wert, der Gegenwart von Salzen sowie von der Ionenstärke der Lösung abhängig ist. Nach der Charakterisierung der Polymere in Lösung wurden Experimente der kovalenten Kopplung der Polymere I bis III an die Oberfläche der Gold-Elektroden durchgeführt. Während bei Polymeren I und II die Ankopplung auf einer Amidverbrückung basierte, wurde bei Polymer III als alternative Methode zur Immobilisierung eine photoinduzierte Anbindung unter gleichzeitiger Vernetzung gewählt. Der Nachweis der erfolgreichen Ankopplung erfolgte bei allen Polymeren elektrochemisch mittels Cyclovoltammetrie und Impedanzspektroskopie in K3/4[Fe(CN)6]-Lösungen. Wie die Ellipsometrie-Messungen zeigten, waren die erhaltenen Polymer-Filme unterschiedlich dick. Die Ankopplung über Amidverbrückung lieferte dünne Filme (10 – 15 nm), während der photovernetzte Film deutlich dicker war (70-80 nm) und die darunter liegende Oberfläche relativ gut isolierte. Elektrochemische Temperaturexperimente an Polymer-modifizierten Oberflächen in Lösungen in Gegenwart von K3/4[Fe(CN)6] zeigten, dass auch die immobilisierten Polymere I bis III responsives Temperaturverhalten zeigen. Bei Elektroden mit den immobilisierten Polymeren I und II ist der Temperaturverlauf der Parameterwerte diskontinuierlich – ab einem kritischen Punkt (37 °C für Polymer I und 45 °C für Polymer II) wird zunächst langsame Zunahme der Peakströme wird deutlich schneller. Das Temperaturverhalten von Polymer III ist dagegen bis 50 °C kontinuierlich, der Peakstrom sinkt hier durchgehend. Weiterhin wurde mit den auf Polymeren II und III basierten Elektroden deren Anwendung als responsive Matrix für Bioerkennungsreaktionen untersucht. Es wurde die Ankopplung von kleinen Biorezeptoren, TAG-Peptiden, an Polymer II- und Polymer III-modifizierten Elektroden durchgeführt. Das hydrophile FLAG-TAG-Peptid verändert das Temperaturverhalten des Polymer II-Films unwesentlich, da es die Hydrophilie des Netzwerkes nicht beeinflusst. Weiterhin wurde der Effekt der Ankopplung der ANTI-FLAG-TAG-Antikörper an FLAG-TAG-modifizierte Polymer II-Filme untersucht. Es konnte gezeigt werden, dass die Antikörper spezifisch an FLAG-TAG-modifiziertes Polymer II binden. Es wurde keine unspezifische Anbindung von ANTI-FLAG-TAG an Polymer II beobachtet. Die Temperaturexperimente haben gezeigt, dass die thermische Restrukturierung des Polymer II-FLAG-TAG-Filmes auch nach der Antikörper-Ankopplung noch stattfindet. Der Einfluss der ANTI-FLAG-TAG-Ankopplung ist gering, da der Unterschied in der Hydrophilie zwischen Polymer II und FLAG-TAG bzw. ANTI-FLAG-TAG zu gering ist. Für die Untersuchungen mit Polymer III-Elektroden wurde neben dem hydrophilen FLAG-TAG-Peptid das deutlich hydrophobere HA-TAG-Peptid ausgewählt. Wie im Falle der Polymer II Elektrode beeinflusst das gekoppelte FLAG-TAG-Peptid das Temperaturverhalten des Polymer III-Netzwerkes nur geringfügig. Die gemessenen Stromwerte sind geringer als bei der Polymer III-Elektrode. Das Temperaturverhalten der FLAG-TAG-Elektrode ähnelt dem der reinen Polymer III-Elektrode – die Stromwerte sinken kontinuierlich bis die Temperatur von ca. 40 °C erreicht ist, bei der ein Plateau beobachtet wird. Offensichtlich verändert FLAG-TAG auch in diesem Fall nicht wesentlich die Hydrophilie des Polymer III-Netzwerkes. Das an Polymer III-Elektroden gekoppelte hydrophobe HA-TAG-Peptid beeinflusst dagegen im starken Maße den Quellzustand des Netzwerkes. Die Ströme für die HA-TAG-Elektroden sind deutlich geringer als die für die FLAG-TAG-Polymer III-Elektroden, was auf geringeren Wassergehalt und dickeren Film zurückzuführen ist. Bereits ab 30 °C erfolgt der Anstieg von Stromwerten, der bei Polymer III- bzw. bei Polymer III-FLAG-TAG-Elektroden nicht beobachtet werden kann. Das gekoppelte hydrophobe HA-TAG-Peptid verdrängt Wasser aus dem Polymer III-Netzwerk, was in der Stauchung des Films bereits bei Raumtemperatur resultiert. Dies führt dazu, dass der Film im Laufe des Temperaturanstieges kaum noch komprimiert. Die Stromwerte steigen in diesem Fall entsprechend des Anstiegs der temperaturabhängigen Diffusion des Redoxpaares. Diese Untersuchungen zeigen, dass das HA-TAG-Peptid als Ankermolekül deutlich besser für eine potentielle Verwendung der Polymer III-Filme für sensorische Zwecke geeignet ist, da es sich deutlich in der Hydrophilie von Polymer III unterscheidet. N2 - This work describes the immobilization and characterization of thermoresponsive polymer films on gold electrodes. The immobilized films were thermoresponsive copolymers (polymers I, II and III) from the group of poly(oligo(ethylene glycol)methacrylates). After the synthesis, the aqueous solutions of copolymers in presence of (buffering) salts were investigated. The turbidimetry measurements revealed that the responsive behaviour of the polymers strongly depends on the pH and the ionic strength of the solution. After the studies in the solution, experiments on the covalent immobilization of the polymers on gold electrodes were performed. The fixation strategy for the polymers I and II was based on the amide coupling. The polymer III was immobilized by irradiation with UV-light. The successful immobilization was proved by cyclic voltammetry and electrochemical impedance spectroscopy measurements in solutions containing K3/4[Fe(CN)6]. The ellipsometry measurements showed that the obtained films were of different thickness. Polymer I and II films obtained from the amide coupling were thinner (10 – 15 nm) compared to photolytically immobilized polymer III films (70-80 nm). Electrochemical temperature experiments on polymer modified electrodes in K3/4[Fe(CN)6] solutions showed that the polymer I, II and III retain the responsivity after the fixation on the electrode surface. The thermoresponsive behaviour of the thin polymer I and II films is discontinuous – after the achieving of the critical temperature point (37 °C for polymer I and 45 °C for polymer II) the increase of the peak currents changes significantly and becomes faster hinting at the restructuration process. In contrast to this the temperature behaviour of the polymer III films is continuous in the temperature range between 25 and 50 °C. The peak currents for the polymer III electrodes decrease with increasing temperature. Furthermore, the application of polymer II and polymer III surfaces as a responsive platform for bio-recognition reactions was investigated. For this purpose, the coupling of small bioreceptors (tag peptides) on polymer films was performed. It was found that the hydrophilic FLAG-TAG peptide does not significantly alter the temperature behaviour of the polymer II film because it does not affect the hydrophilicity of the network. Additionally, the effect of coupling the ANTI-FLAG-TAG antibodies to FLAG-TAG-modified polymer II films was investigated. It was shown that the antibodies specifically bind to FLAG-TAG-modified polymer II. No nonspecific binding of ANTI-FLAG-TAG to polymer II was observed. The temperature experiments have shown that the thermal restructuring of the polymer II-FLAG-TAG film still takes place after antibody coupling. The influence of ANTI-FLAG-TAG coupling is low, since the difference in the hydrophilicity between polymer II and FLAG-TAG or ANTI-FLAG-TAG is too low. In addition to the hydrophilic FLAG-TAG peptide, the significantly more hydrophobic HA-TAG peptide was selected for the investigations with polymer III electrodes. As in the case of the polymer II electrode, the coupled FLAG-TAG peptide only slightly affects the temperature behaviour of the polymer III network. The measured current values are lower than for the polymer III electrode. The temperature behaviour of the FLAG-TAG electrode resembles that of the pure polymer III electrode - the current values sink continuously until the temperature of approx. 40 ° C is reached, at which a plateau is observed. Obviously, FLAG-TAG does not significantly alter the hydrophilicity of the polymer III network even in this case. The hydrophobic HA-TAG peptide coupled to polymer III electrodes, on the other hand, strongly influences the swelling state of the network. The currents for the HA-TAG electrodes are significantly lower than those for the FLAG-TAG polymer III electrodes, which is due to lower water content and thicker film. The increase in current values occurs at temperatures as low as 30 ° C, which cannot be observed with polymer III or with polymer III FLAG TAG electrodes. The coupled hydrophobic HA-TAG peptide displaces water from the polymer III network, resulting in the compression of the film even at room temperature. As a result, the film hardly compresses during the temperature rise. The current values increase in this case according to the increase in the temperature-dependent diffusion of the redox pair. These studies show that the HA-TAG peptide as an anchoring molecule is much better suited for a potential use of the polymer III films for sensory purposes since it is clearly different in the hydrophilicity of polymer III. KW - thermoresponsiv KW - Polymer KW - Biosensor KW - Cyclovoltammetrie KW - Elektrochemie KW - thermoresponsive KW - polymer KW - biosensor KW - cyclic voltammetry KW - electrochemistry Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-396551 ER - TY - THES A1 - Frasca, Stefano T1 - Biocatalysis on nanostructured surfaces : investigation and application of redox proteins using spectro-electrochemical methods T1 - Biokatalyse auf nanostrukturierten Oberflächen : Untersuchung und Anwendung von Redox-Proteinen unter Verwendung von Spektro-Elektrochemischen Verfahren N2 - In this thesis, different aspects within the research field of protein spectro- and electro-chemistry on nanostructured materials are addressed. On the one hand, this work is related to the investigation of nanostructured transparent and conductive metal oxides as platform for the immobilization of electroactive enzymes. On the other hand the second part of this work is related to the immobilization of sulfite oxidase on gold nanoparticles modified electrode. Finally direct and mediated spectroelectrochemistry protein with high structure complexity such as the xanthine dehydrogenase from Rhodobacter capsulatus and its high homologues the mouse aldehyde oxidase homolog 1. Stable immobilization and reversible electrochemistry of cytochrome c in a transparent and conductive tin-doped and tin-rich indium oxide film with a well-defined mesoporosity is reported. The transparency and good conductivity, in combination with the large surface area of these materials, allow the incorporation of a high amount of electroactive biomolecules (between 250 and 2500 pmol cm-2) and their electrochemical and spectroscopic investigation. Both, the electrochemical behavior and the immobilization of proteins are influenced by the geometric parameters of the porous material, such as the structure and pore shape, the surface chemistry, as well as the protein size and charge. UV-Vis and resonance Raman spectroscopy, in combination with direct protein voltammetry, are employed for the characterization of cytochrome c immobilized in the mesoporous indium tin oxide and reveal no perturbation of the structural integrity of the redox protein. A long term protein immobilization is reached using these unmodified mesoporous indium oxide based materials, i.e. more than two weeks even at high ionic strength. The potential of this modified material as an amperometric biosensor for the detection of superoxide anions is demonstrated. A sensitivity of about 100 A M-1 m-2, in a linear measuring range of the superoxide concentration between 0.13 and 0.67 μM, is estimated. In addition an electrochemical switchable protein-based optical device is designed with the core part composed of cytochrome c immobilized on a mesoporous indium tin oxide film. A color developing redox sensitive dye is used as switchable component of the system. The cytochrome c-catalyzed oxidation of the dye by hydrogen peroxide is spectroscopically investigated. When the dye is co-immobilized with the protein, its redox state is easily controlled by application of an electrical potential at the supporting material. This enables to electrochemical reset the system to the initial state and repetitive signal generation. The case of negative charged proteins, which does not have a good interaction with the negative charged indium oxide based films, is also explored. The modification of an indium tin oxide film with a positive charged polymer and the employment of a antimony doped tin oxide film were investigated in this work in order to overcome the repulsion induced by similar charges of the protein and electrode. Human sulfite oxidase and its separated heme-containing domain are able to direct exchange electrons with the supporting material. A study of a new approach for sulfite biosensing, based on enhanced direct electron transfer of a human sulfite oxidase immobilized on a gold nanoparticles modified electrode is reported. The spherical gold nanoparticles were prepared via a novel method by reduction of HAuCl4 with branched poly(ethyleneimine) in an ionic liquid resulting in particles of about 10 nm in hydrodynamic diameter. These nanoparticles were covalently attached to a mercaptoundecanoic acid modified Au-electrode and act as platform where human sulfite oxidase is adsorbed. An enhanced interfacial electron transfer and electrocatalysis is therefore achieved. UV-Vis and resonance Raman spectroscopy, in combination with direct protein voltammetry, were employed for the characterization of the system and reveal no perturbation of the structural integrity of the redox protein. The proposed biosensor exhibited a quick steady-state current response, within 2 s and a linear detection range between 0.5 and 5.4 μM with high sensitivity (1.85 nA μM-1). The investigated system provides remarkable advantages, since it works at low applied potential and at very high ionic strength. Therefore these properties could make the proposed system useful in the development of bioelectronic devices and its application in real samples. Finally protein with high structure complexity such as the xanthine dehydrogenase from Rhodobacter capsulatus and the mouse aldehyde oxidase homolog 1 were spectroelectrochemically studied. It could be demonstrated that different cofactors present in the protein structure, like the FAD and the molybdenum cofactor, are able to directly exchange electrons with an electrode and are displayed as a single peak in a square wave voltammogram. Protein mutants bearing a serine substituted to the cysteines, bounding to the most exposed iron sulfur cluster additionally showed direct electron transfer which can be attributable to this cluster. On the other hand a mediated spectroelectrochemical titration of the protein bound FAD cofactor was performed in presence of transparent iron and cobalt complex mediators. The results showed the formation of the stable semiquinone and the fully reduced flavin. Two formal potentials for each single electron exchange step were then determined. N2 - In dieser Arbeit werden verschiedenen Aspekte im Forschungsfeld der Protein-Spekro- und Elektro-Chemie an nanostrukturierte Materialien behandelt. Zum einen werden in dieser Arbeit nanostrukturierte, transparente und leitfähige Metalloxide als Basis für die Immobilisierung von elektroaktiven Enzym untersucht. Des Weiteren behandelt diese Arbeit die Immobilisierung von humaner Sulfitoxidase auf einer Gold-Nanopartikel-modifizierten Elektrode. Schließlich wird die direkte und die vermittelte Elektrochemie von Xanthindehydrogenase aus Rhodobacter capsulatus und Aldehydoxidase Homolog 1, aus Mause, vorgestellt. Im ersten Teil der Arbeit wird über die stabile Immobilisierung und reversible Elektrochemie von Cytochrom c in einem transparenten und leitfähigen Zinn-dotierten und Zinn-reichen Indiumoxid Film mit einer gut definierten Mesoporosität berichtet. Die Transparenz und gute Leitfähigkeit in Kombination mit der großen Oberfläche dieser Materialien erlauben die Inkorporation einer große Menge elektroaktiver Biomoleküle (zwischen 250 und 2500 pmol cm-2) und deren elektrochemische und spektroskopische Untersuchung. Das elektrochemische Verhalten und die Proteinimmobilisierung sind durch die geometrischen Parameter des porösen Materials, wie die Struktur und Porenform, die Oberflächenchemie, sowie die Größe und Ladung des Proteins beeinflusst. UV-Vis und Resonanz-Raman-Spektroskopie in Kombination mit direkter Protein-Voltammetrie werden für die Charakterisierung von Cytochrom c eingesetzt und zeigen keine Störung der strukturellen Integrität des Redox-Proteins durch die Immobilisierung. Eine langfristige Immobilisierung des Proteins von mehr als zwei Wochen auch bei hoher Ionenstärke wurde unter Verwendung dieser unmodifizierten mesoporösen Indiumoxid-basierten Materialien erreicht. Das Potential dieses modifizierten Materials für die Verwendung in einem amperometrischen Biosensor zum Nachweis von Superoxid-Anionen wurde aufgezeigt. Es wurde eine Empfindlichkeit von etwa 100 A M-1 m-2, in einem linearen Messbereich der Superoxidkonzentration zwischen 0,13 und 0,67 µM, erreicht. Außerdem wurde ein elektrochemisch umschaltbares Protein-basiertes optisches Gerät konzipiert mit Cytochrom c und der mesoporösen Indiumzinnoxidschicht. Ein redox-sensitiver Farbstoff wurde als schaltbare Komponente des Systems verwendet. Die Cytochrom c Oxidation des Farbstoffs durch Wasserstoffperoxid wurde spektroskopisch untersucht. Der Redox-Zustand des Farbstoffs, co-immobilisiert mit dem Protein, ist leicht durch das Anlegen eines elektrischen Potentials an das Trägermaterial kontrollierbar. Dadurch wird die elektrochemische Zurücksetzung des Systems auf den Anfangszustand und eine repetitive Signalerzeugung ermöglicht. Für negativ geladene Proteine, die keine gute Interaktion mit dem negativ geladenen Indiumoxid-basierten Film zeigen wurden die Modifikation der Indiumzinnoxidschicht mit einem positiv geladenen Polymer sowie die Verwendung eines Antimon-dotierten Zinnoxid Films vorgeschlagen. Dadurch konnte die Abstoßung induziert durch die ähnliche Ladung des Proteins und der Elektrode überwunden werden. Es gelang für die humane Sulfit-Oxidase und die separate Häm-haltige Domäne der Austausch von Elektronen mit dem Trägermaterial. Im zweiten Teil der Arbeit wird über eine neue Methode für die Biosensorik von Sulfit berichtet, bei der direkte Elektronentransfer von humaner Sulfitoxidase immobilisierten auf einer mit Gold-Nanopartikeln modifizierten Elektrode verstärkt wurde. Die sphärischen Gold-Nanopartikeln, von etwa 10 nm im Durchmesser, wurden über eine neue Methode durch Reduktion von HAuCl4 mit verzweigtem Polyethylenimin in einer ionischen Flüssigkeit synthetisiert. Diese Nanopartikel wurden kovalent an eine mit Mercaptoundecansäure modifizierten Gold-Elektrode immobilisiert und dienen als Basis für die Adsorption von Sulfitoxidase adsorbiert wurde. Dadurch wurde ein schneller heterogener Elektronen-Transfer und verbesserte Elektrokatalyse erreicht. Für die Charakterisierung des verwendeten Systems eingesetzt wurden UV-Vis und Resonanz-Raman-Spektroskopie in Kombination mit direkter Protein-Voltammetrie. Es wurde keine Störung der strukturellen Integrität des Redox-Proteins beobachtet. Der vorgeschlagene Biosensor zeigte eine schnelle steady-state Stromantwort innerhalb von 2 s, eine lineare Detektion im Bereich zwischen 0,5 und 5,4 µM Sulfit mit einer hohen Empfindlichkeit (1,85 nA µM-1). Das untersuchte System bietet bemerkenswerte Vorteile da es ermöglicht bei niedriger angelegter Spannung und bei sehr hoher Ionenstärke zu arbeiten. Aufgrund dieser Eigenschaften hat das vorgeschlagene System großes Potential für die Entwicklung von bioelektronischen Geräten und der Anwendung in realen Proben. Schließlich werden im letzten Teil der Arbeit die komplexeren Enzymen Xanthindehydrogenase aus Rhodobacter capsulatus und Maus Aldehydoxidase Homolog 1 spektro- und elektrochemisch untersucht. Es konnte gezeigt werden, dass verschiedene Kofaktoren in der Proteinstruktur, wie FAD und der Molybdän Kofaktor direkt Elektronen mit einer Elektrode austauschen können, was durch einzelne Peaks im Square Wave Voltammogramm angezeigt wird. Es konnte eine zusätzliche redoxaktive Gruppe mit direktem Elektronen-Transfer nach Austausch eines Cysteins durch Serin am exponierten Eisen-Schwefel-Cluster gezeigt werden. Außerdem wurde eine vermittelte spektroelektrochemische Titration des FAD-Kofaktors in Anwesenheit von Mediatoren der Klasse der Eisen und Kobalt-Komplexe durchgeführt. Die Ergebnisse zeigen, dass FAD in R. capsulatus XDH zu einem stabilen Semichinone reduziert werden kann. Es gelang die formalen Potentiale für die zwei einzigen Elektrontransferprozesse zu bestimmen. KW - Protein Spektroelektrochemie KW - nanostrukturierte Materialien KW - Sulfitoxidase KW - Xanthindehydrogenase KW - Biosensor KW - Protein spectroelectrochemistry KW - nanostructured materials KW - sulfite oxidase KW - xanthine dehydrogenase KW - biosensor Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-58131 ER - TY - JOUR A1 - Hovestaedt, Marc A1 - Memczak, Henry A1 - Pleiner, Dennis A1 - Zhang, Xin A1 - Rappich, Joerg A1 - Bier, Frank Fabian A1 - Stöcklein, Walter F. M. T1 - Characterization of a new maleimido functionalization of gold for surface plasmon resonance spectroscopy JF - Journal of molecular recognition : an international journal devoted to research on specific molecular recognition in chemistry, biology, biotechnology and medicine N2 - Para-maleimidophenyl (p-MP) modified gold surfaces have been prepared by one-step electrochemical deposition and used in surface plasmon resonance (SPR) studies. Therefore, a FITC mimotope peptide (MP1, 12 aa), a human mucin 1 epitope peptide (MUC, 9 aa) and a protein with their specific antibodies were used as model systems. The peptides were modified with an N-terminal cysteine for covalent and directed coupling to the maleimido functionalized surface by means of Michael addition. The coupling yield of the peptide, the binding characteristics of antibody and the unspecific adsorption of the analytes were investigated. The results expand the spectrum of biosensors usable with p-MP by widely used SPR and support its potential to be versatile for several electrochemical and optical biosensors. This allows the combination of an electrochemical and optical read-out for a broad variety of biomolecular interactions on the same chip. Copyright (c) 2014 John Wiley & Sons, Ltd. KW - biosensor KW - surface plasmon resonance KW - diazonium coupling KW - maleimidophenyl KW - cys-peptide KW - aryl diazonium salts Y1 - 2014 U6 - https://doi.org/10.1002/jmr.2396 SN - 0952-3499 SN - 1099-1352 VL - 27 IS - 12 SP - 707 EP - 713 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Krylov, Andrey. V. A1 - Adamzig, H. A1 - Walter, A. D. A1 - Loechel, B. A1 - Kurth, E. A1 - Pulz, O. A1 - Szeponik, Jan A1 - Wegerich, Franziska A1 - Lisdat, Fred T1 - Parallel generation and detection of superoxide and hydrogen peroxide in a fluidic chip JF - Sensors and actuators : B, Chemical N2 - A fluidic chip system was developed, which combines a stable generation of superoxide radicals and hydrogen peroxide with their sensorial detection. The generation of both reactive oxygen species was achieved by immobilization of xanthine oxidase on controlled pore glass in a reaction chamber. Antioxidants can be introduced into the fluidic chip system by means of mixing chamber. The detection of both species is based on the amperometric principle using a biosensor chip with two working electrodes. As sensing protein for both electrodes cytochrome c was used. The novel system was designed for the quantification of the antioxidant efficiency of different potential scavengers of the respective reactive species in an aqueous medium. Several model antioxidants such as ascorbic acid or catalase have been tested under flow conditions. KW - biosensor KW - cytochrome c KW - flow system KW - reactive oxygen species KW - antioxidant Y1 - 2006 U6 - https://doi.org/10.1016/j.snb.2005.11.062 SN - 0925-4005 VL - 119 IS - 1 SP - 118 EP - 126 PB - Elsevier CY - Lausanne ER - TY - THES A1 - Memczak, Henry T1 - Entwicklung influenzabindender Peptide für die Biosensorik T1 - Engineering of influenza-binding peptides for biosensing N2 - Das Influenzavirus infiziert Säugetiere und Vögel. Der erste Schritt im Infektionszyklus ist die Anbindung des Viruses über sein Oberflächenprotein Hämagglutinin (HA) an Zuckerstrukturen auf Epithelzellen des respiratorischen Traktes im Wirtsorganismus. Aus den drei komplementaritätsbestimmenden Regionen (complementarity determining regions, CDRs) der schweren Kette eines monoklonalen Hämagglutinin-bindenden Antikörpers wurden drei lineare Peptide abgeleitet. Die Bindungseigenschaften der drei Peptide wurden experimentell mittels Oberflächenplasmonenresonanzspektroskopie untersucht. Es zeigte sich, dass in Übereinstimmung mit begleitenden Molekulardynamik-Simulationen zwei der drei Peptide (PeB und PeC) analog zur Bindefähigkeit des Antikörpers in der Lage sind, Influenzaviren vom Stamm X31 (H3N2 A/Aichi/2/1968) zu binden. Die Interaktion des Peptids PeB, welches potentiell mit der konservierten Rezeptorbindestelle im HA interagiert, wurde anschließend näher charakterisiert. Die Detektion der Influenzaviren war unter geeigneten Immobilisationsbedingungen im diagnostisch relevanten Bereich möglich. Die Spezifität der PeB-Virus-Bindung wurde mittels geeigneter Kontrollen auf der Seite des Analyten und des Liganden nachgewiesen. Des Weiteren war das Peptid PeB in der Lage die Bindung von X31-Viren an Mimetika seines natürlichen Rezeptors zu inhibieren, was die spezifische Interaktion mit der Rezeptorbindungsstelle im Hämagglutinin belegt. Anschließend wurde die Primärsequenz von PeB durch eine vollständige Substitutionsanalyse im Microarray-Format hinsichtlich der Struktur-Aktivitäts-Beziehungen charakterisiert. Dies führte außerdem zu verbesserten Peptidvarianten mit erhöhter Affinität und breiterer Spezifität gegen aktuelle Influenzastämme verschiedener Serotypen (z.B. H1N1/2009, H5N1/2004, H7N1/2013). Schließlich konnte durch Verwendung einer in der Primärsequenz angepassten höher affinen Peptidvariante die Influenzainfektion in vitro inhibiert werden. Damit stellen die vom ursprünglichen Peptid PeB abgeleiteten Varianten Rezeptormoleküle in biosensorischen Testsystemen sowie potentielle Wirkstoffe dar. N2 - The influenza virus infects mammals and birds. The first step of the infection cycle comprises the attachment of the viral surface protein hemagglutinin (HA) on glycan structures on epithelial cells within the respiratory tract of the host organism. Starting from the complementarity determining regions (CDRs) of the heavy chain of a monoclonal hemagglutinin-binding antibody three linear peptides were derived. The binding properties of these peptides was characterized experimentally using surface plasmon resonance spectroscopy. In accordance with accompanying molecular dynamics simulation it was shown, that two of the three peptides (PeB and PeC) were able to bind the influenza virus of the strain X31 (H3N2 A/Aichi/2/1968) comparably to the antibody itself. The interaction of peptide PeB, which was supposed to bind to the conserved receptor binding site at the HA, was then characterized more in detail. The detection of influenza viruses was achieved within the diagnostically relevant concentration range using defined immobilization conditions. The specificity of the peptide-virus-binding was proven by appropriate control experiments. Additionally, peptide PeB was able to inhibit the binding of X31 viruses to mimics of its natural receptor. Furthermore the structure-activity-relationship within all the amino acids of peptide PeB was characterized using a full substitutional analysis in a microarray format. This led to improved peptidic variants, which were able to bind different influenza serotypes and inhibit the influenza infection in vitro. The found peptides and their variants can now be used as receptor molecules in biosensors and also represent potential drug candidates. KW - Influenza KW - Peptid KW - Biosensor KW - Virus KW - Interaktionsstudie KW - influenza KW - peptide KW - biosensor KW - virus KW - interaction analysis Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72470 ER - TY - THES A1 - Naseri, Gita T1 - Plant-derived transcription factors and their application for synthetic biology approaches in Saccharomyces cerevisiae T1 - Pflanzenbasierte Transkriptionsfaktoren und ihre Anwendungen in der synthetischen Biologie in Saccharomyces cerevisiae N2 - Bereits seit 9000 Jahren verwendet die Menschheit die Bäckerhefe Saccharomyces cerevisiae für das Brauen von Bier, aber erst seit 150 Jahren wissen wir, dass es sich bei diesem unermüdlichen Helfer im Brauprozess um einzellige, lebende Organismen handelt. Und die Bäckerhefe kann noch viel mehr. Im Rahmen des Forschungsgebietes der Synthetischen Biologie soll unter anderem die Bäckerhefe als innovatives Werkzeug für die biobasierte Herstellung verschiedenster Substanzen etabliert werden. Zu diesen Substanzen zählen unter anderem Feinchemikalien, Biokraftstoffe und Biopolymere sowie pharmakologisch und medizinisch interessante Pflanzenstoffe. Damit diese verschiedensten Substanzen in der Bäckerhefe hergestellt werden können, müssen große Mengen an Produktionsinformationen zum Beispiel aus Pflanzen in die Hefezellen übertragen werden. Darüber hinaus müssen die neu eingebrachten Biosynthesewege reguliert und kontrolliert in den Zellen ablaufen. Auch Optimierungsprozesse zur Erhöhung der Produktivität sind notwendig. Für alle diese Arbeitsschritte mangelt es bis heute an anwendungsbereiten Technologien und umfassenden Plattformen. Daher wurden im Rahmen dieser Doktorarbeit verschiedene Technologien und Plattformen zur Informationsübertragung, Regulation und Prozessoptimierung geplant und erzeugt. Für die Konstruktion von Biosynthesewegen in der Bäckerhefe wurde als erstes eine Plattform aus neuartigen Regulatoren und Kontrollelementen auf der Basis pflanzlicher Kontrollelemente generiert und charakterisiert. Im zweiten Schritt erfolgte die Entwicklung einer Technologie zur kombinatorischen Verwendung der Regulatoren in der Planung und Optimierung von Biosynthesewegen (COMPASS). Abschließend wurde eine Technologie für die Prozessoptimierung der veränderten Hefezellen entwickelt (CapRedit). Die Leistungsfähigkeit der entwickelten Plattformen und Technologien wurde durch eine Optimierung der Produktion von Carotenoiden (Beta-Carotin und Beta-Ionon) und Flavonoiden (Naringenin) in Hefezellen nachgewiesen. Die im Rahmen der Arbeit etablierten neuartigen Plattformen und innovativen Technologien sind ein wertvoller Grundbaustein für die Erweiterung der Nutzbarkeit der Bäckerhefe. Sie ermöglichen den Einsatz der Hefezellen in kosteneffizienten Produktionswegen und alternativen chemischen Wertschöpfungsketten. Dadurch können zum Beispiel Biokraftstoffe und pharmakologisch interessante Pflanzenstoffe unter Verwendung von nachwachsenden Rohstoffen, Reststoffen und Nebenprodukten hergestellt werden. Darüber hinaus ergeben sich Anwendungsmöglichkeiten zur Bodensanierung und Wasseraufbereitung. N2 - Plant-derived Transcription Factors for Orthologous Regulation of Gene Expression in the Yeast Saccharomyces cerevisiae Control of gene expression by transcription factors (TFs) is central in many synthetic biology projects where tailored expression of one or multiple genes is often needed. As TFs from evolutionary distant organisms are unlikely to affect gene expression in a host of choice, they represent excellent candidates for establishing orthogonal control systems. To establish orthogonal regulators for use in yeast (Saccharomyces cerevisiae), we chose TFs from the plant Arabidopsis thaliana. We established a library of 106 different combinations of chromosomally integrated TFs, activation domains (yeast GAL4 AD, herpes simplex virus VP64, and plant EDLL) and synthetic promoters harbouring cognate cis-regulatory motifs driving a yEGFP reporter. Transcriptional output of the different driver / reporter combinations varied over a wide spectrum, with EDLL being a considerably stronger transcription activation domain in yeast, than the GAL4 activation domain, in particular when fused to Arabidopsis NAC TFs. Notably, the strength of several NAC - EDLL fusions exceeded that of the strong yeast TDH3 promoter by 6- to 10-fold. We furthermore show that plant TFs can be used to build regulatory systems encoded by centromeric or episomal plasmids. Our library of TF – DNA-binding site combinations offers an excellent tool for diverse synthetic biology applications in yeast. COMPASS: Rapid combinatorial optimization of biochemical pathways based on artificial transcription factors We established a high-throughput cloning method, called COMPASS for COMbinatorial Pathway ASSembly, for the balanced expression of multiple genes in Saccharomyces cerevisiae. COMPASS employs orthogonal, plant-derived artificial transcription factors (ATFs) for controlling the expression of pathway genes, and homologous recombination-based cloning for the generation of thousands of individual DNA constructs in parallel. The method relies on a positive selection of correctly assembled pathway variants from both, in vivo and in vitro cloning procedures. To decrease the turnaround time in genomic engineering, we equipped COMPASS with multi-locus CRISPR/Cas9-mediated modification capacity. In its current realization, COMPASS allows combinatorial optimization of up to ten pathway genes, each transcriptionally controlled by nine different ATFs spanning a 10-fold difference in expression strength. The application of COMPASS was demonstrated by generating cell libraries producing beta-carotene and co-producing beta-ionone and biosensor-responsive naringenin. COMPASS will have many applications in other synthetic biology projects that require gene expression balancing. CaPRedit: Genome editing using CRISPR-Cas9 and plant-derived transcriptional regulators for the redirection of flux through the FPP branch-point in yeast. Technologies developed over the past decade have made Saccharomyces cerevisiae a promising platform for production of different natural products. We developed CRISPR/Ca9- and plant derived regulator-mediated genome editing approach (CaPRedit) to greatly accelerate strain modification and to facilitate very low to very high expression of key enzymes using inducible regulators. CaPRedit can be implemented to enhance the production of yeast endogenous or heterologous metabolites in the yeast S. cerevisiae. The CaPRedit system aims to faciltiate modification of multiple targets within a complex metabolic pathway through providing new tools for increased expression of genes encoding rate-limiting enzymes, decreased expression of essential genes, and removed expression of competing pathways. This approach is based on CRISPR/Cas9-mediated one-step double-strand breaks to integrate modules containing IPTG-inducible plant-derived artificial transcription factor and promoter pair(s) in a desired locus or loci. Here, we used CaPRedit to redirect the yeast endogenous metabolic flux toward production of farnesyl diphosphate (FPP), a central precursor of nearly all yeast isoprenoid products, by overexpression of the enzymes lead to produce FPP from glutamate. We found significantly higher beta-carotene accumulation in the CaPRedit-mediated modified strain than in the wild type (WT) strain. More specifically, CaPRedit_FPP 1.0 strain was generated, in which three genes involved in FPP synthesis, tHMG1, ERG20, and GDH2, were inducibly overexpressed under the control of strong plant-derived ATFPs. The beta–carotene accumulated in CaPRedit_FPP 1.0 strain to a level 1.3-fold higher than the previously reported optimized strain that carries the same overexpressed genes (as well as additional genetic modifications to redirect yeast endogenous metabolism toward FPP production). Furthermore, the genetic modifications implemented in CaPRedit_FPP 1.0 strain resulted in only a very small growth defect (growth rate relative to the WT is ~ -0.03). KW - synthetic biology KW - Saccharomyces cerevisiae KW - artificial transcription factor KW - combinatorial optimization KW - biosensor KW - DNA assembly KW - pathway engineering KW - artifizielle Transkriptionsfaktoren KW - Biosensor KW - kombinatorische Optimierung KW - DNA assembly KW - Saccharomyces cerevisiae KW - synthetische Biologie KW - pathway engineering Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-421514 ER -