TY - THES A1 - Behrendt, Felix Nicolas T1 - New bio-based polymers T1 - Neue biobasierte Polymere BT - synthesis and polymerization of cystine-based macrocycles BT - Synthese und Polymerisation von cystinbasierten Makrozyklen N2 - Redox-responsive polymers, such as poly(disulfide)s, are a versatile class of polymers with potential applications including gene- and drug-carrier systems. Their degradability under reductive conditions allows for a controlled response to the different redox states that are present throughout the body. Poly(disulfide)s are typically synthesized by step growth polymerizations. Step growth polymerizations, however, may suffer from low conversions and therefore low molar masses, limiting potential applications. The purpose of this thesis was therefore to find and investigate new synthetic routes towards the synthesis of amino acid-based poly(disulfide)s. The different routes in this thesis include entropy-driven ring opening polymerizations of novel macrocyclic monomers, derived from cystine derivatives. These monomers were obtained with overall yields of up to 77% and were analyzed by mass spectrometry as well as by 1D and 2D NMR spectroscopy. The kinetics of the entropy-driven ring-opening metathesis polymerization (ED-ROMP) were thoroughly investigated in dependence of temperature, monomer concentration, and catalyst concentration. The polymerization was optimized to yield poly(disulfide)s with weight average molar masses of up to 80 kDa and conversions of ~80%, at the thermodynamic equilibrium. Additionally, an alternative metal free polymerization, namely the entropy-driven ring-opening disulfide metathesis polymerization (ED-RODiMP) was established for the polymerization of the macrocyclic monomers. The effect of different solvents, concentrations and catalyst loadings on the polymerization process and its kinetics were studied. Polymers with very high weight average molar masses of up to 177 kDa were obtained. Moreover, various post-polymerization reactions were successfully performed. This work provides the first example of the homopolymerization of endo-cyclic disulfides by ED-ROMP and the first substantial study into the kinetics of the ED-RODiMP process. N2 - Redoxresponsive Polymere, wie etwa Polydisulfide, sind eine vielseitige Klasse von Polymeren, die unter anderem als Gen- und Wirkstoffträgersysteme eingesetzt werden können. Ihre Abbaubarkeit unter reduktiven Bedingungen ermöglicht eine kontrollierte Reaktion auf die verschiedenen Redoxzustände im Körper. Polydisulfide werden jedoch häufig durch Stufenwachstums-polymerisationen synthetisiert. Diese führen oft zu niedrigen Umsätzen und daher zu niedrigen molaren Massen. Das Ziel dieser Arbeit war daher neue Synthesewege für aminosäurebasierte Polydisulfide zu finden und zu untersuchen. Diese Wege beinhalteten entropiegetriebene ringöffnende Polymerisationen von neuen makrozyklischen Monomeren, auf der Basis von Cystin-Derivaten. Diese Monomere konnten mit einer Gesamtausbeute von bis zu 77% synthetisiert werden und wurden mit Massenspektrometrie sowie mit 1D- und 2D-NMR-Spektroskopie analysiert. Die Kinetik der entropiegetriebenen ringöffnenden Metathese Polymerisation (ED-ROMP) wurde im Hinblick auf Temperatur, Monomerkonzentration und Katalysatormenge sorgfältig untersucht. Durch Optimierungen konnten Polydisulfide mit gewichtsmittleren Molmassen von bis zu 80 kDa und Umsätzen von ~80%, im thermodynamischen Gleichgewicht synthetisiert werden. Zusätzlich wurde eine alternative metallfreie Polymerisation, die entropiegetriebene ringöffnende Disulfidmetathese Polymerisation (ED-RODiMP), für die Polymerisation der makrozyklischen Monomere etabliert. Die Auswirkungen verschiedener Lösungsmittel, Konzentrationen und Katalysatorkonzentrationen auf die Kinetik dieses Polymerisationsprozesses wurden untersucht. Hierdurch wurden Polymere mit sehr hohen gewichtsmittleren Molmassen von bis zu 177 kDa erhalten. Darüber hinaus wurden verschiedene Postpolymerisationsreaktionen erfolgreich durchgeführt. Diese Arbeit liefert das erste Beispiel für die Homopolymerisation endo-zyklischer Disulfide durch ROMP und eine erste substanzielle Studie der Kinetik des ED-RODiMP-Prozesses. KW - polymers KW - ADMET KW - ROMP KW - disulfide KW - macrocycles KW - ring-opening polymerization KW - amino acids KW - Polymere KW - ADMET KW - ROMP KW - Disulfide KW - Makrozyklen KW - ringöffnende Polymerisation KW - Aminosäuren Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-418316 ER - TY - JOUR A1 - Blavatska, Viktoria A1 - Metzler, Ralf T1 - Conformational properties of complex polymers: rosette versus star-like structures JF - Journal of physics : A, Mathematical and theoretical N2 - Multiple loop formation in polymer macromolecules is an important feature of the chromatin organization and DNA compactification in the nuclei. We analyse the size and shape characteristics of complex polymer structures, containing in general f(1) loops (petals) and f(2) linear chains (branches). Within the frames of continuous model of Gaussian macromolecule, we apply the path integration method and obtain the estimates for gyration radius R-g and asphericity (A) over cap of typical conformation as functions of parameters f(1), f(2). In particular, our results qualitatively reveal the extent of anisotropy of star-like topologies as compared to the rosette structures of the same total molecular weight. KW - polymers KW - path integration KW - conformational properties Y1 - 2015 U6 - https://doi.org/10.1088/1751-8113/48/13/135001 SN - 1751-8113 SN - 1751-8121 VL - 48 IS - 13 PB - IOP Publ. Ltd. CY - Bristol ER - TY - JOUR A1 - Cherstvy, Andrey G. T1 - Critical polyelectrolyte adsorption under confinement Planar slit, cylindrical pore, and spherical cavity JF - Biopolymers N2 - We explore the properties of adsorption of flexible polyelectrolyte chains in confined spaces between the oppositely charged surfaces in three basic geometries. A method of approximate uniformly valid solutions for the Green function equation for the eigenfunctions of polymer density distributions is developed to rationalize the critical adsorption conditions. The same approach was implemented in our recent study for the inverse problem of polyelectrolyte adsorption onto a planar surface, and on the outer surface of rod-like and spherical obstacles. For the three adsorption geometries investigated, the theory yields simple scaling relations for the minimal surface charge density that triggers the chain adsorption, as a function of the Debye screening length and surface curvature. The encapsulation of polyelectrolytes is governed by interplay of the electrostatic attraction energy toward the adsorbing surface and entropic repulsion of the chain squeezed into a thin slit or small cavities. Under the conditions of surface-mediated confinement, substantially larger polymer linear charge densities are required to adsorb a polyelectrolyte inside a charged spherical cavity, relative to a cylindrical pore and to a planar slit (at the same interfacial surface charge density). Possible biological implications are discussed briefly in the end. KW - polymers KW - adsorption KW - electrostatics KW - confinement Y1 - 2012 U6 - https://doi.org/10.1002/bip.22023 SN - 0006-3525 VL - 97 IS - 5 SP - 311 EP - 317 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Couturier, Jean-Philippe A1 - Sütterlin, Martin A1 - Laschewsky, André A1 - Hettrich, Cornelia A1 - Wischerhoff, Erik T1 - Responsive Inverse Opal Hydrogels for the Sensing of Macromolecules JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Dual responsive inverse opal hydrogels were designed as autonomous sensor systems for (bio)macromolecules, exploiting the analyte-induced modulation of the opal's structural color. The systems that are based on oligo(ethylene glycol) macromonomers additionally incorporate comonomers with various recognition units. They combine a coil-to-globule collapse transition of the LCST type with sensitivity of the transition temperature toward molecular recognition processes. This enables the specific detection of macromolecular analytes, such as glycopolymers and proteins, by simple optical methods. While the inverse opal structure assists the effective diffusion even of large analytes into the photonic crystal, the stimulus responsiveness gives rise to strong shifts of the optical Bragg peak of more than 100nm upon analyte binding at a given temperature. The systems' design provides a versatile platform for the development of easy-to-use, fast, and low-cost sensors for pathogens. KW - hydrogels KW - photonic crystals KW - polymers KW - responsive materials KW - sensors Y1 - 2015 U6 - https://doi.org/10.1002/anie.201500674 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 22 SP - 6641 EP - 6644 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Fandrich, Artur A1 - Buller, Jens A1 - Wischerhoff, Erik A1 - Laschewsky, André A1 - Lisdat, Fred T1 - Electrochemical detection of the thermally induced phase transition of a thin stimuli-responsive polymer film JF - ChemPhysChem : a European journal of chemical physics and physical chemistry KW - cyclic voltammetry KW - electrochemical impedance spectroscopy KW - polymers KW - surface chemistry KW - surface plasmon resonance Y1 - 2012 U6 - https://doi.org/10.1002/cphc.201100924 SN - 1439-4235 VL - 13 IS - 8 SP - 2020 EP - 2023 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Groth, Thomas T1 - Die Bedeutung der Volumen- und Oberflächeneigenschaften von Biomaterialien für die Adsorption von Proteinen und nachfolgende zelluläre Reaktionen N2 - Es ist schon seit längerer Zeit bekannt, dass nach Kontakt des Biomaterials mit der biologischen Umgebung bei Implantation oder extrakorporaler Wechselwirkung zunächst Proteine aus dem umgebenden Milieu adsorbiert werden, wobei die Oberflächeneigenschaften des Materials die Zusammensetzung der Proteinschicht und die Konformation der darin enthaltenden Proteine determinieren. Die nachfolgende Wechselwirkung von Zellen mit dem Material wird deshalb i.d.R. von der Adsorbatschicht vermittelt. Der Einfluss der Oberflächen auf die Zusammensetzung und Konformation der Proteine und die nachfolgende Wechselwirkung mit Zellen ist von besonderem Interesse, da einerseits eine Aussage über die Anwendbarkeit ermöglicht wird, andererseits Erkenntnisse über diese Zusammenhänge für die Entwicklung neuer Materialien mit verbesserter Biokompatibilität genutzt werden können. In der vorliegenden Habilitationsschrift wurde deshalb der Einfluss der Zusammensetzung von Polymeren bzw. von deren Oberflächeneigenschaften auf die Adsorption von Proteinen, den Aktivitätszustand der plasmatischen Gerinnung und die Adhäsion von Zellen untersucht. Dabei wurden auch Möglichkeiten zur Beeinflussung dieser Vorgänge über eine Veränderung der Volumenzusammensetzung oder durch Oberflächenmodifikationen von Biomaterialien vorgestellt. Erkenntnisse aus diesen Arbeiten konnten für die Entwicklung von Membranen für Biohybrid-Organe genutzt werden. N2 - The implantation of biomaterials or the contact of blood with extracorporal devices leads to the rapid adsorption of proteins from the surrounding biological fluids. The surface properties of materials determine the composition of the adsorption layer and the conformation of adsorbed proteins. Hence, the subsequent interaction of cells with biomaterials is dependent on the adsorption layer of proteins. The detailed knowledge on the role of surface properties in protein adsorption and cellular interactions is a useful means to learn about the biomedical applicability of materials and to develop novel materials with improved biocompatibility. The thesis describes the influence of polymer composition and surface properties on protein adsorption, the activation of blood clotting and adhesion of cells. The thesis presents options to modify the reactions of the biological system by the modification of bulk or surface composition of polymers. Results of these studies have been used to develop polymer membranes for biohybrid organs. KW - Biomaterialien KW - Polymere KW - Protein Adsorption KW - Zelladhäsion KW - Biohybride Organe KW - biomaterials KW - polymers KW - protein adsorption KW - cell adhesion KW - biohybrid organs Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001022 ER - TY - THES A1 - Gutjahr, Petra T1 - Conformations of semiflexible polymers and filaments T1 - Konformationen von semiflexiblen Polymeren und Filamenten N2 - The biological function and the technological applications of semiflexible polymers, such as DNA, actin filaments and carbon nanotubes, strongly depend on their rigidity. Semiflexible polymers are characterized by their persistence length, the definition of which is the subject of the first part of this thesis. Attractive interactions, that arise e.g.~in the adsorption, the condensation and the bundling of filaments, can change the conformation of a semiflexible polymer. The conformation depends on the relative magnitude of the material parameters and can be influenced by them in a systematic manner. In particular, the morphologies of semiflexible polymer rings, such as circular nanotubes or DNA, which are adsorbed onto substrates with three types of structures, are studied: (i) A topographical channel, (ii) a chemically modified stripe and (iii) a periodic pattern of topographical steps. The results are compared with the condensation of rings by attractive interactions. Furthermore, the bundling of two individual actin filaments, whose ends are anchored, is analyzed. This system geometry is shown to provide a systematic and quantitative method to extract the magnitude of the attraction between the filaments from experimentally observable conformations of the filaments. N2 - Die biologische Funktion und die technologischen Anwendungen semiflexibler Polymere, wie DNA, Aktinfilamente und Nanoröhren aus Kohlenstoff, werden wesentlich von deren Biegesteifigkeit bestimmt. Semiflexible Polymere werden charakterisiert durch ihre Persistenzlänge, mit deren Definition sich der erste Teil dieser Arbeit befasst. Anziehende Wechselwirkungen, wie sie z.B. bei der Adsorption, der Kondensation und der Bündelung von Filamenten auftreten, können die Konformation eines semiflexiblen Polymers verändern. Die Konformation ist dabei abhängig von der relativen Größe der Materialparameter und kann durch diese gezielt beeinflusst werden. Im Einzelnen werden hier die Morphologien semiflexibler Polymerringe, wie z.B. DNA oder ringförmiger Nanoröhren, untersucht, die auf drei verschieden strukturierten Substraten adsorbieren: (i) Ein topographischer Kanal, (ii) ein chemisch modifizierter Streifen und (iii) ein periodisches Muster topographischer Oberflächenstufen. Die Ergebnisse werden mit der Kondensation von Ringen durch anziehende Wechselwirkungen verglichen. Des Weiteren wird die Bündelung zweier Aktinfilamente, deren Enden verankert sind, untersucht. Diese Systemgeometrie liefert eine systematische Methode, um die Stärke der Anziehung zwischen den Filamenten aus experimentell beobachtbaren Konformationen zu berechnen. KW - Polymere KW - Filamente KW - Persistenzlänge KW - Adsorption KW - Filament-Bündel KW - polymers KW - filaments KW - persistence length KW - adsorption KW - filament bundles Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-15918 ER - TY - THES A1 - Heinz, Markus T1 - Synthese von Monomeren auf der Basis nachwachsender Rohstoffe und ihre Polymerisation T1 - Synthesis of Monomers based on Renewable Resources and their Polymerization N2 - Die vorliegende Arbeit thematisiert die Synthese und die Polymerisation von Monomeren auf der Basis nachwachsender Rohstoffe wie zum Beispiel in Gewürzen und ätherischen Ölen enthaltenen kommerziell verfügbaren Phenylpropanoiden (Eugenol, Isoeugenol, Zimtalkohol, Anethol und Estragol) und des Terpenoids Myrtenol sowie ausgehend von der Rinde einer Birke (Betula pendula) und der Korkeiche (Quercus suber). Ausgewählte Phenylpropanoide (Eugenol, Isoeugenol und Zimtalkohol) und das Terpenoid Myrtenol wurden zunächst in den jeweiligen Laurylester überführt und anschließend das olefinische Strukturelement epoxidiert, wobei 4 neue (2-Methoxy-4-(oxiran-2-ylmethyl)phenyldodecanoat, 2-Methoxy-4-(3-methyl-oxiran-2-yl)phenyldodecanoat, (3-Phenyloxiran-2-yl)methyldodecanoat, (7,7-Dimethyl-3-oxatricyclo[4.1.1.02,4]octan-2-yl)methyldodecanoat) und 2 bereits bekannte monofunktionelle Epoxide (2-(4-Methoxybenzyl)oxiran und 2-(4-Methoxyphenyl)-3-methyloxiran) erhalten wurden, die mittels 1H-NMR-, 13C-NMR- und FT-IR-Spektroskopie sowie mit DSC untersucht wurden. Die Photo-DSC Untersuchung der Epoxidmonomere in einer kationischen Photopolymerisation bei 40 °C ergab die maximale Polymerisationsgeschwindigkeit (Rpmax: 0,005 s-1 bis 0,038 s-1) sowie die Zeit (tmax: 13 s bis 26 s) bis zum Erreichen des Rpmax-Wertes und führte zu flüssigen Oligomeren, deren zahlenmittlerer Polymerisationsgrad mit 3 bis 6 mittels GPC bestimmt wurde. Die Umsetzung von 2-Methoxy-4-(oxiran-2-ylmethyl)phenyldodecanoat mit Methacrylsäure ergab ein Isomerengemisch (2-Methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyldodecanoat und 2-Methoxy-4-(2-(methacryl-oyloxy)-3-hydroxypropyl)phenyldodecanoat), das mittels Photo-DSC in einer freien radikalischen Photopolymerisation untersucht wurde (Rpmax: 0,105 s-1 und tmax: 5 s), die zu festen in Chloroform unlöslichen Polymeren führte. Aus Korkpulver und gemahlener Birkenrinde wurden selektiv 2 kristalline ω-Hydroxyfettsäuren (9,10-Epoxy-18-hydroxyoctadecansäure und 22-Hydroxydocosansäure) isoliert. Die kationische Photopolymerisation der 9,10-Epoxy-18-hydroxyoctadecansäure ergab einen nahezu farblosen transparenten und bei Raumtemperatur elastischen Film, welcher ein Anwendungspotential für Oberflächenbeschichtungen hat. Aus der Reaktion von 9,10-Epoxy-18-hydroxyoctadecansäure mit Methacrylsäure wurde ein bei Raumtemperatur flüssiges Gemisch aus zwei Konstitutionsisomeren (9,18-Dihydroxy-10-(methacryloyloxy)octadecansäure und 9-(Methacryloyloxy)-10,18-dihydroxyoctadecansäure) erhalten (Tg: -60 °C). Die radikalische Photopolymerisation dieser Konstitutionsisomere wurde ebenfalls mittels Photo-DSC untersucht (Rpmax: 0,098 s-1 und tmax: 3,8 s). Die Reaktion von 22-Hydroxydocosansäure mit Methacryloylchlorid ergab die kristalline 22-(Methacryloyloxy)docosansäure, welche ebenfalls in einer radikalischen Photopolymerisation mittels Photo-DSC untersucht wurde (Rpmax: 0,023 s-1 und tmax: 9,6 s). Die mittels AIBN in Dimethylsulfoxid initiierte Homopolymerisation der 22-(Methacryloyloxy)docosansäure und der Isomerengemische bestehend aus 2-Methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyldodecanoat und 2-Methoxy-4-(2-(methacryl-oyloxy)-3-hydroxypropyl)phenyldodecanoat sowie aus 9,18-Dihydroxy-10-(methacryloy-loxy)octadecansäure und 9-(Methacryloyloxy)-10,18-dihydroxyoctadecansäure ergab feste lösliche Polymere, die mittels 1H-NMR- und FT-IR-Spektroskopie, GPC (Poly(2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyldodecanoat / 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)phenyldodecanoat): Pn = 94) und DSC (Poly(2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyldodecanoat / 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)phenyldodecanoat): Tg: 52 °C; Poly(9,18-dihydroxy-10-(methacryloyloxy)-octadecansäure / 9-(methacryloyloxy)-10,18-dihydroxyoctadecansäure): Tg: 10 °C; Poly(22-(methacryloyloxy)docosansäure): Tm: 74,1 °C, wobei der Schmelzpunkt mit dem des Photopolymers (Tm = 76,8 °C) vergleichbar ist) charakterisiert wurden. Das bereits bekannte Monomer 4-(4-Methacryloyloxyphenyl)butan-2-on wurde ausgehend von 4-(4-Hydroxyphenyl)butan-2-on hergestellt, welches aus Birkenrinde gewonnen werden kann, und unter identischen Bedingungen für einen Vergleich mit den neuen Monomeren polymerisiert. Die freie radikalische Polymerisation führte zu Poly(4-(4-methacryloyloxyphenyl)butan-2-on) (Pn: 214 und Tg: 83 °C). Neben der Homopolymerisation wurde eine statistische Copolymerisation des Isomerengemisches 2-Methoxy-4-(2-hydroxy-3-(methacryl-oyloxy)propyl)phenyldodecanoat / 2-Methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)-phenyldodecanoat mit 4-(4-Methacryloyloxyphenyl)butan-2-on untersucht, wobei ein äquimolarer Einsatz der Ausgangsmonomere zu einem Anstieg der Ausbeute, der Molmassenverteilung und der Dispersität des Copolymers (Tg: 44 °C) führte. Die unter Verwendung von Diethylcarbonat als „grünes“ Lösungsmittel mittels AIBN initiierten freien radikalischen Homopolymerisationen von 4-(4-Methacryloyloxyphenyl)butan-2-on und von Laurylmethacrylat ergaben vergleichbare Polymerisationsgrade der Homopolymere (Pn: 150), welche jedoch aufgrund ihrer Strukturunterschiede deutlich unterschiedliche Glasübergangstemperaturen hatten (Poly(4-(4-methacryloyloxyphenyl)butan-2-on): Tg: 70 °C, Poly(laurylmethacrylat) Tg: -49 °C. Eine statistische Copolymerisation äquimolarer Stoffmengen der beiden Monomere in Diethylcarbonat führte bei einer Polymerisationszeit von 60 Minuten zu einem leicht bevorzugten Einbau des 4-(4-Methacryloyloxyphenyl)butan-2-on in das Copolymer (Tg: 17 °C). Copolymerisationsdiagramme für die freien radikalischen Copolymerisationen von 4-(4-Methacryloyloxyphenyl)butan-2-on mit n-Butylmethacrylat beziehungsweise 2-(Dimethylamino)ethylmethacrylat (t: 20 min bis 60 min; Molenbrüche (X) für 4-(4-Methacryloyloxyphenyl)butan-2-on: 0,2; 0,4; 0,6 und 0,8) zeigten ein nahezu ideales azeotropes Copolymerisationsverhalten, obwohl ein leicht bevorzugter Einbau von 4-(4-Methacryloyloxyphenyl)butan-2-on in das jeweilige Copolymer beobachtet wurde. Dabei korreliert ein Anstieg der Ausbeute und der Glasübergangstemperatur der erhaltenen Copolymere mit einem zunehmenden Gehalt an 4-(4-Methacryloyloxyphenyl)butan-2-on im Reaktionsgemisch. Die unter Einsatz der modifizierten Gibbs-DiMarzio-Gleichung berechneten Glasübergangstemperaturen der Copolymere stimmten mit den gemessenen Werten gut überein. Das ist eine gute Ausgangsbasis für die Bestimmung der Glasübergangstemperatur eines Copolymers mit einer beliebigen Zusammensetzung. N2 - The subject of this work is the synthesis and polymerization of monomers based on renewable material e. g. commercially available phenylpropanoides (eugenol, iso-eugenol, cinnamyl alcohol, anethol, and estragol) containing in spices and essential oils, the terpenoid myrtenol, as well as material derived from the bark of a birch (Betula pendula) and cork oak (Quercus suber). Selected phenylpropanoides (eugenol, iso-eugenol and cinnamyl alcohol) and the terpenoid myrtenol were first transferred to the lauryl ester followed by epoxidation of the olefinic structure to yield 4 new (2-methoxy-4-(oxiran-2-ylmethyl)-phenyl dodecanoate, 2-methoxy-4-(3-methyloxiran-2-yl)phenyl dodecanoate, (3-phenyloxiran-2-yl)methyl dodecanoate, (7,7-dimethyl-3-oxatricyclo[4.1.1.02,4]octan-2-yl)methyl dodecanoate) and 2 already known monofunctional epoxides (2-(4-methoxybenzyl)oxirane and 2-(4-methoxy-phenyl)-3-methyloxirane), which were investigated using 1H-NMR-, 13C-NMR- and FT-IR- spectroscopy, and DSC. Photo-DSC investigation of the cationic polymerization of the epoxy monomers at 40 °C revealed the maximum polymerization rate (Rpmax: 0,005 s-1 to 0,038 s-1) and the time (tmax: 13 s to 26 s) to obtain the Rpmax value. Liquid oligomers were obtained with a number average degree of polymerization between 3 and 6, as determined by GPC. The reaction of 2-methoxy-4-(oxiran-2-ylmethyl)phenyl dodecanoate with methacrylic acid resulted in a mixture of isomers (2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)-phenyl dodecanoate and 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)phenyl dodecanoate). Free radical photopolymerization of this isomeric mixture, studied by photo-DSC (Rpmax: 0,105 s-1 and tmax: 5 s), resulted in solid polymers that were insoluble in chloroform. Two crystalline ω-hydroxy fatty acids (9,10-epoxy-18-hydroxyoctadecanoic acid and 22-hydroxydocosanoic acid) were selectively isolated from cork powder and powdered birch bark. The cationic photopolymerization of 9,10-epoxy-18-hydroxyoctadecanoic acid resulted in a nearly colorless transparent film that was elastic at room temperature. Therefore, it has an application potential in the manufacture of coatings. The reaction of 9,10-epoxy-18-hydroxyoctadecanoic acid with methacrylic acid resulted in a mixture of two constitutional isomers (9,18-dihydroxy-10-(methacryloyloxy)octadecanoic acid and 9-(methacryloyloxy)-10,18-dihydroxyoctadecanoic acid), which is liquid at room temperature (Tg: -60 °C). The radical photopolymerization of these constitutional isomers was also studied by photo-DSC (Rpmax: 0,098 s-1 and tmax: 3,8 s). The reaction of 22-hydroxydocosanoic acid with methacryloyl chloride yielded crystalline 22-(methacryloyloxy)docosanoic acid, which was studied by photo-DSC in a radical photopolymerization (Rpmax: 0,023 s-1 and tmax: 9,6 s). The homopolymerization of both 22-(methacryloyloxy)docosanoic acid and the isomeric mixtures consisting of 2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyl dodecanoate and 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxypropyl)phenyl dodecanoat as well as 9,18-dihydroxy-10-(methacryloyloxy)octadecanoic acid and 9-(methacryloyloxy)-10,18-dihydroxyoctadecanoic acid resulted in solid soluble polymers, which were characterized by 1H-NMR- and FT-IR-spectroscopy, GPC (poly(2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyl dodecanoat / 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxy-propyl)phenyl dodecanoate): Pn = 94), and DSC (poly(2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyl dodecanoate / 2-methoxy-4-(2-(methacryloyloxy)-3-hydroxy-propyl)phenyl dodecanoate): Tg: 52 °C; poly(9,18-dihydroxy-10-(methacryloyloxy)-octadecanoic acid / 9-(methacryloyloxy)-10,18-dihydroxyoctadecanoic acid): Tg: 10 °C; poly(22-(methacryloyloxy)docosanoic acid): Tm: 74,1 °C, this melting temperature is comparable to that of the photopolymer (Tm = 76,8 °C)). The already known monomer 4-(4-methacryloyloxyphenyl)butane-2-one was synthesized from 4-(4-hydroxyphenyl)butan-2-one obtained from birch bark and polymerized under identical conditions for comparison with the new monomers. The free radical polymerization resulted in poly(4-(4-methacryloyloxyphenyl)butan-2-one) (Pn: 214 and Tg: 83 °C). Besides the homopolymerization, a random copolymerization of the 2-methoxy-4-(2-hydroxy-3-(methacryloyloxy)propyl)phenyl dodecanoate / 2-methoxy-4-(2-(methacryloyl-oxy)-3-hydroxypropyl)phenyl dodecanoate isomer mixture with 4-(4-methacryloyloxyphenyl)butan-2-one was also investigated, which resulted in an increase in the yield, molecular weight distribution and dispersity of the copolymer (Tg: 44 °C) at a stoichiometric ratio of the monomers. The application of diethyl carbonate as „green“ solvent in the free radical homopolymerization of both 4-(4-methacryloyloxyphenyl)butan-2-one and lauryl methacrylate initiated with AIBN resulted in a comparable degree of polymerization of the homopolymers obtained (Pn: 150). However, due to the structural differences of the monomer segments, different glass transition temperatures were obtained for poly(4-(4-methacryloyloxyphenyl)butan-2-one) (Tg: 70 °C) and poly(lauryl methacrylate) (Tg: -49 °C). A random copolymerization of a stoichiometric ratio of the monomers in diethyl carbonate resulted in a slightly preferential incorporation of the 4-(4-methacryloyloxyphenyl)butan-2-one in the copolymer (Tg: 17 °C) after a polymerization time of 60 min. Copolymerization diagrams for free radical copolymerizations of 4-(4-methacryloyloxyphenyl)butan-2-one with either n-butyl methacrylate or 2-(dimethylamino)ethyl methacrylate (t: 20 min to 60 min; molar fraction (X) for 4-(4-methacryloyloxyphenyl)butan-2-one: 0,2; 0,4; 0,6 and 0,8) showed an almost ideal azeotropic copolymerization behavior, although a slightly preferential incorporation of the 4-(4-methacryloyloxyphenyl)butan-2-one was observed in the copolymers. An increase in both yield and glass transition temperature of the copolymers obtained correlated with an increasing content on 4-(4-methacryloyloxyphenyl)butan-2-one in the reaction mixture. Good agreement was found between the glass transition temperatures calculated using the modified Gibbs-DiMarzio equation and the measured values for the copolymers. This is a good basis for determining the glass transition temperature of a copolymer of any composition. KW - photoinitiierte kationische Polymerisation KW - Epoxide KW - epoxidierte Phenylpropanoide KW - epoxidierte Terpene KW - Copolymerisationsdiagramme KW - freie radikalische Polymerisation KW - Glasübergangstemperaturen KW - Methacrylate KW - Molmassen KW - statistische Copolymere KW - 9,10-Epoxy-18-hydroxyoctadecansäure KW - biobasierte Methacrylate KW - biobasierte Monomere KW - nachwachsende Rohstoffe KW - 22-Hydroxydocosansäure KW - photoinitiierte Polymerisation KW - Polymerisation KW - Betula pendula KW - Quercus suber KW - Birke KW - Korkeiche KW - Biomasse KW - Birkenrinde KW - grüne Chemie KW - Polymere KW - photoinitiierte freie radikalische Polymerisation KW - 22-hydroxydocosanoic acid KW - 9,10-epoxy-18-hydroxyoctadecanoic acid KW - Betula pendula KW - biomass KW - birch KW - birch bark KW - copolymerization diagrams KW - Epoxides KW - Glass transition temperatures KW - Cork oak KW - Methacrylates KW - Molar masses KW - polymers KW - polymerization KW - Quercus suber KW - bio-based methacrylates KW - bio-based monomers KW - epoxidized phenylpropanoids KW - epoxidized terpenes KW - free radical polymerization KW - green chemistry KW - renewable raw materials KW - photoinitiated polymerization KW - photoinitiated free radical KW - photoinitiated cationic polymerization KW - random copolymers KW - photopolymerization KW - Baumrinde KW - Rinde KW - tree bark KW - bark KW - Photopolymerisation Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-637943 ER - TY - THES A1 - Ilic, Ivan T1 - Design of sustainable cathodes for Li-ion batteries T1 - Design nachhaltiger Kathoden für Li-Ionen-Batterien BT - understanding the redox behaviour of guaiacyl and catecholic groups in lithium organic system N2 - In recent years people have realised non-renewability of our modern society which relays on spending huge amounts of energy mostly produced from fosil fuels, such as oil and coal, and the shift towards more sustainable energy sources has started. However, sustainable sources of energy, such as wind-, solar- and hydro-energy, produce primarily electrical energy and can not just be poured in canister like many fosil fuels, creating necessity for rechragable batteries. However, modern Li-ion batteries are made from toxic heavy metals and sustainable alternatives are needed. Here we show that naturally abundant catecholic and guaiacyl groups can be utilised to replace heavy metals in Li-ion batteries. Foremost vanillin, a naturally occurring food additive that can be sustainably synthesised from industrial biowaste, lignin, was utilised to synthesise materials that showed extraordinary performance as cathodes in Li-ion batteries. Furthermore, behaviour of catecholic and guiacyl groups in Li-ion system was compared, confirming usability of guiacayl containing biopolymers as cathodes in Li-ion batteries. Lastly, naturally occurring polyphenol, tannic acid, was incorporated in fully bioderived hybrid material that shows performance comparable to commercial Li-ion batteries and good stability. This thesis presents an important advancement in understanding of biowaste derived cathode materials for Li-ion batteries. Further research should be conducted to better understand behaviour of guaiacyl groups during Li-ion battery cycling. Lastly, challenges of incorporation of lignin, an industrial biowaste, have to be addressed and lignin should be incorporated as a cathode material in Li-ion batteries. N2 - Diese Dissertation untersucht, wie nachhaltige Kathoden (Kathodenmaterialien) für Lithium-Ionen-Batterien aus Holzabfällen hergestellt werden können. In den letzten Jahren hat die Menschheit erkannt, wie wenig nachhaltig unsere moderne Gesellschaft ist und große Mengen an Energie verbraucht, welche zum größten Teil aus fossilen Brennstoffen gewonnen werden. Daher versucht man jetzt die Energie aus hauptsächlich erneuerbaren Quellen wie Sonne und Wind zu gewinnen. Allerdings kann elektrische Energie nicht einfach wie Öl in einen Kanister gegossen werden, sondern muss in wieder aufladbaren Batterien gespeichert werden. In den letzten Jahren wurden Lithium-Ionen-Batterien entwickelt, die leistungsstark und allgegenwärtig sind, da sie zum Beispiel in Handys und sogar Autos Verwendung finden. Lithium-Ionen-Batterien verwenden jedoch Trägermaterialien aus giftigen Schwermetallen, die abgebaut werden müssen, was sich negativ auf die Umwelt auswirkt. In diesem Zusammenhang ist insbesondere das Schwermetall Kobalt zu erwähnen, welches in den meisten modernen Kathoden verwendet wird. Nach dem Bekanntwerden von Sklaverei und Kinderarbeit beim Kobaltabbau im Kongo, folgten große Kontroversen, da Kobalt praktisch in jedem Gerät führender Unternehmen wie zum Beispiel Apple und Microsoft zu finden ist. Idealerweise müssen wir von nicht erneuerbaren Schwermetallen zu erneuerbaren organischen Molekülen wechseln. Daher verwende ich in meiner Forschung Vanillin, ein Molekül, das hinsichtlich der Elektronenspeicherung ähnliche Eigenschaften wie Schwermetalle aufweist, jedoch viele Vorteile bietet. Erstens erkennt man Vanillin am spezifischen Geruch, da es einer der Hauptbestandteile von Vanille und daher ein natürlich vorkommendes Molekül ist. Zweitens kann es aus Holzabfällen oder aus Abfällen vieler Industrien hergestellt werden, die Holz als Rohstoff verwenden, wie beispielsweise der Papierindustrie. Durch milde chemische Reaktionen in Lösemitteln wie Wasser, Essig und Alkohol haben wir Vanillin zu einem Material modifiziert, welches hervorragende Eigenschaften zur Verwendung in Lithium-Ionen-Batterien hat und die bisher verwendeten Schwermetelle ersetzen kann. Diese Batterien wären somit erneuerbar und können uns der nachhaltigen Welt einen Schritt näher bringen. Darüber hinaus wurde Tanninsäure, ein natürlich vorkommendes Polymer in Holzrinde, verwendet, um vollständig aus Bioabfällen bestehende Batterien herzustellen. KW - biomass KW - electrochemistry KW - energy conversion KW - polymers KW - redox chemistry KW - Biomasse KW - Elektrochemie KW - Energieumwandlung KW - Polymere KW - Redoxchemie Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-483689 ER - TY - JOUR A1 - Kappel, Marcel A1 - Abel, Markus A1 - Gerhard, Reimund T1 - Characterization and calibration of piezoelectric polymers in situ measurements of body vibrations JF - Review of scientific instruments : a monthly journal devoted to scientific instruments, apparatus, and techniques N2 - Piezoelectric polymers are known for their flexibility in applications, mainly due to their bending ability, robustness, and variable sensor geometry. It is an optimal material for minimal-invasive investigations in vibrational systems, e.g., for wood, where acoustical impedance matches particularly well. Many applications may be imagined, e. g., monitoring of buildings, vehicles, machinery, alarm systems, such that our investigations may have a large impact on technology. Longitudinal piezoelectricity converts mechanical vibrations normal to the polymer-film plane into an electrical signal, and the respective piezoelectric coefficient needs to be carefully determined in dependence on the relevant material parameters. In order to evaluate efficiency and durability for piezopolymers, we use polyvinylidene fluoride and measure the piezoelectric coefficient with respect to static pressure, amplitude of the dynamically applied force, and long-term stability. A known problem is the slow relaxation of the material towards equilibrium, if the external pressure changes; here, we demonstrate how to counter this problem with careful calibration. Since our focus is on acoustical measurements, we determine accurately the frequency response curve - for acoustics probably the most important characteristic. Eventually, we show that our piezopolymer transducers can be used as a calibrated acoustical sensors for body vibration measurements on a wooden musical instrument, where it is important to perform minimal-invasive measurements. A comparison with the simultaneously recorded airborne sound yields important insight of the mechanism of sound radiation in comparison with the sound propagating in the material. This is especially important for transient signals, where not only the long-living eigenmodes contribute to the sound radiation. Our analyses support that piezopolymer sensors can be employed as a general tool for the determination of the internal dynamics of vibrating systems. KW - acoustic transducers KW - calibration KW - durability KW - electric sensing devices KW - piezoelectricity KW - polymers Y1 - 2011 U6 - https://doi.org/10.1063/1.3607435 SN - 0034-6748 VL - 82 IS - 7 PB - American Institute of Physics CY - Melville ER -