TY - THES A1 - Ansel, Simon T1 - Die Diffusion von Innovationen in deutschen Kommunen T1 - Diffusion of e-government at the local level BT - eine Untersuchung zu Komponenten des E-Governement BT - empirical evidence from German municipalities N2 - Die fortschreitende Diffusion von E-Government ist ein Phänomen, dem in der internationa-len Forschungsliteratur bereits viel Aufmerksamkeit zu Teil wurde. Erstaunlich wenige Studien widmen sich bislang jedoch dezidiert dem Faktor Interdependenz, der eigentlichen Ursache von Diffusionsprozessen. In dieser Arbeit werden Interdependenzbeziehungen anhand dreier spezifischer Mechanismen der Diffusion, namentlich „Nachahmung“, „Wettbewerb“ und „Lernen“, untersucht. Auf Basis einer empirischen Analyse mit Daten zur Einführung von E-Government-Komponenten in 183 deutschen Städten über den Zeitraum von 1995 bis 2014 konnte ein Einfluss der Mechanismen „Nachahmung“ und „Lernen“ auf das Innovationsverhalten von Kommunen festgestellt werden. Für das Vorliegen von Wettbe-werbsdynamiken ließen sich demgegenüber keine Anhaltspunkte finden. Für zukünftige Forschungen zur Diffusion von Innovationen wird angeregt, verstärkt an die mechanismen- und prozessbasierte Perspektive von Diffusion als theoretischem Rahmenkonzept anzuknüpfen. N2 - The ongoing diffusion of e-government is a phenomenon that has already attracted consid-erable attention in the international research literature. However, few studies have so far focused on the factor of interdependence, the root cause of diffusion processes. This paper deals with interdependence by specifying three causal mechanisms of diffusion, namely "imitation", "competition" and "learning". Drawing upon data collected on the introduction of e-government in 183 German cities over the period from 1995-2014, the empirical analysis identified "imitation" and "learning" as predictors of municipal innovative behavior. Furthermore, no evidence was found supporting the role of “competition”. With regard to future research on innovation diffusion, it is suggested to incorporate the mechanism- and process-based perspective of diffusion as a theoretical framework. T3 - Schriftenreihe für Public und Nonprofit Management - 20 KW - Diffusion KW - E-Government KW - eGovernment KW - öffentlicher Sektor KW - Kommune KW - kommunal KW - diffusion KW - e-government KW - electronic government KW - public sector KW - local KW - municipal KW - Nachahmung KW - Wettbewerb KW - Lernen KW - imitation KW - competition KW - learning Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-80370 SN - 2190-4561 ER - TY - JOUR A1 - Fernandez, Ricardo A1 - Bruno, Giovanni A1 - Garces, Gerardo A1 - Nieto-Luis, H. A1 - Gonzalez-Doncel, Gaspar T1 - Fractional brownian motion of dislocations during creep deformation of metals JF - Materials science & engineering. A, Structural materials N2 - The present work offers an explanation on how the long-range interaction of dislocations influences their movement, and therefore the strain, during creep of metals. It is proposed that collective motion of dislocations can be described as a fractional Brownian motion. This explains the noisy appearance of the creep strain signal as a function of time. Such signal is split into a deterministic and a stochastic part. These terms can be related to two kinds of dislocation motions: individual and collective, respectively. The description is consistent with the fractal nature of strain-induced dislocation structures predicated in previous works. Moreover, it encompasses the evolution of the strain rate during all stages of creep, including the tertiary one. Creep data from Al99.8% and Al3.85%Mg tested at different temperatures and stresses are used to validate the proposed ideas: it is found that different creep stages present different diffusion characters, and therefore different dislocation motion character. KW - Creep KW - Aluminum alloys KW - Dislocation motion KW - Diffusion KW - Fractal KW - structures Y1 - 2020 U6 - https://doi.org/10.1016/j.msea.2020.140013 SN - 0921-5093 SN - 1873-4936 VL - 796 PB - Elsevier CY - Lausanne ER - TY - JOUR A1 - Hannigan, Sara A1 - Nendel, Claas A1 - Krull, Marcos T1 - Effects of temperature on the movement and feeding behaviour of the large lupine beetle, Sitona gressorius JF - Journal of pest science N2 - Even though the effects of insect pests on global agricultural productivity are well recognised, little is known about movement and dispersal of many species, especially in the context of global warming. This work evaluates how temperature and light conditions affect different movement metrics and the feeding rate of the large lupine beetle, an agricultural pest responsible for widespread damage in leguminous crops. By using video recordings, the movement of 384 beetles was digitally analysed under six different temperatures and light conditions in the laboratory. Bayesian linear mixed-effect models were used to analyse the data. Furthermore, the effects of temperature on the daily diffusion coefficient of beetles were estimated by using hidden Markov models and random walk simulations. Results of this work show that temperature, light conditions, and beetles' weight were the main factors affecting the flight probability, displacement, time being active and the speed of beetles. Significant variations were also observed in all evaluated metrics. On average, beetles exposed to light conditions and higher temperatures had higher mean speed and flight probability. However, beetles tended to stay more active at higher temperatures and less active at intermediate temperatures, around 20 degrees C. Therefore, both the diffusion coefficient and displacement of beetles were lower at intermediate temperatures. These results show that the movement behaviour and feeding rates of beetles can present different relationships in the function of temperature. It also shows that using a single diffusion coefficient for insects in spatially explicit models may lead to over- or underestimation of pest spread. KW - Agricultural pests KW - Diffusion KW - Hidden Markov models KW - Movement ecology Y1 - 2022 U6 - https://doi.org/10.1007/s10340-022-01510-7 SN - 1612-4758 SN - 1612-4766 SP - 389 EP - 402 PB - Springer CY - Heidelberg ER - TY - THES A1 - Hennig, Theresa T1 - Uranium migration in the Opalinus Clay quantified on the host rock scale with reactive transport simulations T1 - Uranmigration im Opalinuston quantifiziert für die Wirtsgesteinsskala mit reaktiven Transportsimulationen N2 - Humankind and their environment need to be protected from the harmful effects of spent nuclear fuel, and therefore disposal in deep geological formations is favoured worldwide. Suitability of potential host rocks is evaluated, among others, by the retention capacity with respect to radionuclides. Safety assessments are based on the quantification of radionuclide migration lengths with numerical simulations as experiments cannot cover the required temporal (1 Ma) and spatial scales (>100 m). Aim of the present thesis is to assess the migration of uranium, a geochemically complex radionuclide, in the potential host rock Opalinus Clay. Radionuclide migration in clay formations is governed by diffusion due to their low permeability and retarded by sorption. Both processes highly depend on pore water geochemistry and mineralogy that vary between different facies. Diffusion is quantified with the single-component (SC) approach using one diffusion coefficient for all species and the process-based multi-component (MC) option. With this, each species is assigned its own diffusion coefficient and the interaction with the diffuse double layer is taken into account. Sorption is integrated via a bottom-up approach using mechanistic surface complexation models and cation exchange. Therefore, reactive transport simulations are conducted with the geochemical code PHREEQC to quantify uranium migration, i.e. diffusion and sorption, as a function of mineralogical and geochemical heterogeneities on the host rock scale. Sorption processes are facies dependent. Migration lengths vary between the Opalinus Clay facies by up to 10 m. Thereby, the geochemistry of the pore water, in particular the partial pressure of carbon dioxide (pCO2), is more decisive for the sorption capacity than the amount of clay minerals. Nevertheless, higher clay mineral quantities compensate geochemical variations. Consequently, sorption processes must be quantified as a function of pore water geochemistry in contact with the mineral assemblage. Uranium diffusion in the Opalinus Clay is facies independent. Speciation is dominated by aqueous ternary complexes of U(VI) with calcium and carbonate. Differences in the migration lengths between SC and MC diffusion are with +/-5 m negligible. Further, the application of the MC approach highly depends on the quality and availability of the underlying data. Therefore, diffusion processes can be adequately quantified with the SC approach using experimentally determined diffusion coefficients. The hydrogeological system governs pore water geochemistry within the formation rather than the mineralogy. Diffusive exchange with the adjacent aquifers established geochemical gradients over geological time scales that can enhance migration by up to 25 m. Consequently, uranium sorption processes must be quantified following the identified priority: pCO2 > hydrogeology > mineralogy. The presented research provides a workflow and orientation for other potential disposal sites with similar pore water geochemistry due to the identified mechanisms and dependencies. With a maximum migration length of 70 m, the retention capacity of the Opalinus Clay with respect to uranium is sufficient to fulfill the German legal minimum requirement of a thickness of at least 100 m. N2 - Zum Schutz von Mensch und Umwelt vor den schädlichen Auswirkungen abgebrannter Brennelemente, wird weltweit die Endlagerung in tiefen geologischen Formationen favorisiert. Daher ist das Rückhaltevermögen potenzieller Wirtsgesteine gegenüber Radionukliden ein wichtiges Kriterium. Sicherheitsbewertungen basieren auf der Quantifizierung der Migration mit numerischen Simulationen, da Experimente die erforderlichen zeitlichen (1 Ma) und räumlichen Skalen (>100 m) nicht abdecken können. Ziel der Dissertation ist es, die Migration des geochemisch komplexen Radionuklids Uran im potenziellen Wirtsgestein Opalinuston zu bewerten. In Tonformationen wird die Radionuklidmigration aufgrund der geringen Durchlässigkeit von Diffusion bestimmt und durch Sorption verzögert. Beide Prozesse hängen stark von der Porenwassergeochemie und Mineralogie ab, die zwischen verschiedenen Fazies variieren. Die Diffusion wird mit dem Einkomponenten- (SC) und Mehrkomponentenansatz (MC) quantifiziert. Nach dem SC-Ansatz wird ein Diffusionskoeffizient für alle Spezies verwendet, wohingegen mit der MC-Option individuelle Werte zugewiesen und die Interaktion mit der diffusen Doppelschicht berücksichtigt wird. Die Sorption ist mit Hilfe mechanistischer Oberflächenkomplexierungsmodelle und Kationenaustausch integriert. Die Durchführung reaktiver Transportsimulationen mit dem Code PHREEQC ermöglicht die Quantifizierung der Uranmigration, d. h. Diffusion und Sorption, in Abhängigkeit der Mineralogie und Porenwassergeochemie für die Wirtsgesteinsskala. Sorptionsprozesse sind faziesabhängig. Die Migrationslängen variieren um bis zu 10 m zwischen den Fazies aufgrund von Unterschieden in der Porenwassergeochemie. Dabei ist insbesondere der Partialdruck des Kohlendioxids (pCO2) entscheidender für die Sorptionskapazität als die Menge an Tonmineralen. Allerdings kompensieren höhere Tonmineralmengen geochemische Schwankungen. Folglich müssen Sorptionsprozesse in Abhängigkeit der Porenwassergeochemie quantifiziert werden. Urandiffusion ist faziesunabhängig. Die Speziation wird durch aquatische ternäre Komplexe von U(VI) mit Kalzium und Karbonat dominiert. Die Unterschiede in den Migrationslängen zwischen SC- und MC-Diffusion sind mit +/-5 m vernachlässigbar. Die Anwendung des MC-Ansatzes hängt stark von der Qualität und Verfügbarkeit der zugrunde liegenden Daten ab. Diffusionsprozesse können also mit dem SC-Ansatz unter Verwendung experimentell ermittelter Diffusionskoeffizienten quantifiziert werden. Haupteinflussfaktor auf die Porenwassergeochemie ist das hydrogeologische System und nicht die Mineralogie. Der diffusive Austausch mit den angrenzenden Aquiferen hat über geologische Zeiträume geochemische Gradienten geschaffen, die die Migration um bis zu 25 m verlängern können. Folglich müssen Sorptionsprozesse nach der identifizierten Priorität quantifiziert werden: pCO2 > Hydrogeologie > Mineralogie. Die ermittelten Abhängigkeiten dienen als Orientierung für andere potenzielle Endlagerstandorte mit ähnlicher Porenwassergeochemie. Mit einer maximalen Migration von 70 m reicht das Rückhaltevermögen des Opalinustons gegenüber Uran aus, um die deutsche gesetzliche Mindestanforderung von 100 m Mächtigkeit zu erfüllen. KW - uranium KW - Opalinus Clay KW - PHREEQC KW - diffusion KW - sorption KW - nuclear waste disposal KW - reactive transport simulation KW - host rock scale KW - Opalinuston KW - PHREEQC KW - Diffusion KW - Wirtsgesteinsskala KW - Endlagerung nuklearer Abfälle KW - reaktive Transportsimulation KW - Sorption KW - Uran Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-552700 ER - TY - THES A1 - Klumpp, Stefan T1 - Movements of molecular motors : diffusion and directed walks N2 - Bewegungen von prozessiven molekularen Motoren des Zytoskeletts sind durch ein Wechselspiel von gerichteter Bewegung entlang von Filamenten und Diffusion in der umgebenden Lösung gekennzeichnet. Diese eigentümlichen Bewegungen werden in der vorliegenden Arbeit untersucht, indem sie als Random Walks auf einem Gitter modelliert werden. Ein weiterer Gegenstand der Untersuchung sind Effekte von Wechselwirkungen zwischen den Motoren auf diese Bewegungen. Im einzelnen werden vier Transportphänomene untersucht: (i) Random Walks von einzelnen Motoren in Kompartimenten verschiedener Geometrien, (ii) stationäre Konzentrationsprofile, die sich in geschlossenen Kompartimenten infolge dieser Bewegungen einstellen, (iii) randinduzierte Phasenübergänge in offenen röhrenartigen Kompartimenten, die an Motorenreservoirs gekoppelt sind, und (iv) der Einfluß von kooperativen Effekten bei der Motor-Filament-Bindung auf die Bewegung. Alle diese Phänomene sind experimentell zugänglich, und mögliche experimentelle Realisierungen werden diskutiert. N2 - Movements of processive cytoskeletal motors are characterized by an interplay between directed motion along filament and diffusion in the surrounding solution. In the present work, these peculiar movements are studied by modeling them as random walks on a lattice. An additional subject of our studies is the effect of motor-motor interactions on these movements. In detail, four transport phenomena are studied: (i) Random walks of single motors in compartments of various geometries, (ii) stationary concentration profiles which build up as a result of these movements in closed compartments, (iii) boundary-induced phase transitions in open tube-like compartments coupled to reservoirs of motors, and (iv) the influence of cooperative effects in motor-filament binding on the movements. All these phenomena are experimentally accessible and possible experimental realizations are discussed. KW - molekulare Motoren KW - aktive Prozesse KW - Diffusion KW - Random Walks KW - Gittermodelle KW - Phasenübergänge KW - Staus KW - kooperative Phänomene KW - molecular motors KW - active processes KW - diffusion KW - random walks KW - lattice models KW - phase transitions KW - traffic jams KW - cooperative phenomena Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000806 ER - TY - THES A1 - Kneier, Fabian T1 - Subsea permafrost in the Laptev Sea BT - Influences on degradation, state and distribution BT - Einflüsse auf Degradation, Zustand und Verbreitung N2 - During lower sea levels in glacial periods, deep permafrost formed on large continental shelf areas of the Arctic Ocean. Subsequent sea level rise and coastal erosion created subsea permafrost, which generally degrades after inundation under the influence of a complex suite of marine, near-shore processes. Global warming is especially pronounced in the Arctic, and will increase the transition to and the degradation of subsea permafrost, with implications for atmospheric climate forcing, offshore infrastructure, and aquatic ecosystems. This thesis combines new geophysical, borehole observational and modelling approaches to enhance our understanding of subsea permafrost dynamics. Three specific areas for advancement were identified: (I) sparsity of observational data, (II) lacking implementation of salt infiltration mechanisms in models, and (III) poor understanding of the regional differences in key driving parameters. This study tested the combination of spectral ratios of the ambient vibration seismic wavefield, together with estimated shear wave velocity from seismic interferometry analysis, for estimating the thickness of the unfrozen sediment overlying the ice-bonded permafrost offshore. Mesoscale numerical calculations (10^1 to 10^2 m, thousands of years) were employed to develop and solve the coupled heat diffusion and salt transport equations including phase change effects. Model soil parameters were constrained by borehole data, and the impact of a variety of influences during the transgression was tested in modelling studies. In addition, two inversion schemes (particle swarm optimization and a least-square method) were used to reconstruct temperature histories for the past 200-300 years in the Laptev Sea region in Siberia from two permafrost borehole temperature records. These data were evaluated against larger scale reconstructions from the region. It was found (I) that peaks in spectral ratios modelled for three-layer, one-dimensional systems corresponded with thaw depths. Around Muostakh Island in the central Laptev Sea seismic receivers were deployed on the seabed. Derived depths of the ice-bonded permafrost table were between 3.7-20.7 m ± 15 %, increasing with distance from the coast. (II) Temperatures modelled during the transition to subsea permafrost resembled isothermal conditions after about 2000 years of inundation at Cape Mamontov Klyk, consistent with observations from offshore boreholes. Stratigraphic scenarios showed that salt distribution and infiltration had a large impact on the ice saturation in the sediments. Three key factors were identified that, when changed, shifted the modelled permafrost thaw depth most strongly: bottom water temperatures, shoreline retreat rate and initial temperature before inundation. Salt transport based on diffusion and contribution from arbitrary density-driven mechanisms only accounted for about 50 % of observed thaw depths at offshore sites hundreds to thousands of years after inundation. This bias was found consistently at all three sites in the Laptev Sea region. (III) In the temperature reconstructions, distinct differences in the local temperature histories between the western Laptev Sea and the Lena Delta sites were recognized, such as a transition to warmer temperatures a century later in the western Laptev Sea as well as a peak in warming three decades later. The local permafrost surface temperature history at Sardakh Island in the Lena Delta was reminiscent of the circum-Arctic regional average trends. However, Mamontov Klyk in the western Laptev Sea was consistent to Arctic trends only in the most recent decade and was more similar to northern hemispheric mean trends. Both sites were consistent with a rapid synoptic recent warming. In conclusion, the consistency between modelled response, expected permafrost distribution, and observational data suggests that the passive seismic method is promising for the determination of the thickness of unfrozen sediment on the continental Arctic shelf. The quantified gap between currently modelled and observed thaw depths means that the impact of degradation on climate forcing, ecosystems, and infrastructure is larger than current models predict. This discrepancy suggests the importance of further mechanisms of salt penetration and thaw that have not been considered – either pre-inundation or post-inundation, or both. In addition, any meaningful modelling of subsea permafrost would have to constrain the identified key factors and their regional differences well. The shallow permafrost boreholes provide missing well-resolved short-scale temperature information in the coastal permafrost tundra of the Arctic. As local differences from circum-Arctic reconstructions, such as later warming and higher warming magnitude, were shown to exist in this region, these results provide a basis for local surface temperature record parameterization of climate and, in particular, permafrost models. The results of this work bring us one step further to understanding the full picture of the transition from terrestrial to subsea permafrost. N2 - Als zu glazialen Zeiten der Meeresspiegel niedriger lag, konnte sich tiefer Permafrost (Dauerfrostboden) in weiten Teilen der Kontinentalschelfgebiete des arktischen Ozeans bilden. Durch den darauf folgenden Meeresspiegelanstieg und Küstenerosion wurde dieser überflutet und es entstand submariner Permafrost. Seit der Überflutung wird dieser durch eine Reihe komplexer mariner Prozesse in der küstennahen Zone degradiert. Die Klimaerwärmung ist in der Arktis besonders ausgeprägt, wodurch sich die Überflutung durch Küstenerosion sowie diese Degradationsprozesse in Zukunft weiter intensivieren werden. Dies wird weitreichende Konsequenzen für das Klimasystem (Freisetzung von Treibhausgasen), Offshore-Infrastruktur als auch aquatische Ökosysteme haben. Diese Dissertation kombiniert neue geophysikalische, Bohrlochbeobachtungs-basierte und Modellierungsansätze, um unser Verständnis der speziellen Dynamik des submarinen Permafrosts zu verbessern. Drei spezifische Bereiche wurden identifiziert, welche das derzeitige Verständnis zum submarinen Permafrost maßgeblich einschränken, und in dieser Arbeit gezielt weiterentwickelt wurden: (I) Die spärliche Verfügbarkeit von Beobachtungsdaten, (II) die fehlende Implementation von Salzinfiltrationsmechanismen in Modelbeschreibungen und (III) das mangelnde Verständnis der regionalen Unterschiede von treibenden Einflußparametern. Hierfür wurde die Kombination spektraler Amplitudenverhältnisse der Umgebungsschwingungen im seismischen Wellenfeld (seismisches Hintergrundrauschen) mit der aus seismischer Interferometrie abgeschätzten Scherwellengeschwindigkeit zur Bestimmung der Mächtigkeit der aufgetauten Sedimentschicht oberhalb des eisgebundenen Permafrosts im Meeresboden getestet. Numerische Simulationen (auf der Skala von 10^1 bis 10^2 m, tausende Jahre) wurden zur Entwicklung und Lösung der gekoppelten Wärmeleitungs- und Salztransportgleichungen unter Berücksichtigung von Phasenübergängen angewandt. Hierbei wurden die Modelparameter zur Untergrundbeschaffenheit aus Bohrlochdaten bestimmt und die Auswirkungen verschiedener Parameter während der Meeresüberflutung untersucht. Zusätzlich wurden zwei Inversionsalgorithmen (Partikelschwarmoptimierung und ein Verfahren der kleinsten Quadrate) verwendet, um die Temperaturen der letzten 200-300 Jahre in der Laptewsee-Region in Sibirien anhand zweier Temperaturdatensätze aus Permafrostbohrlöchern zu rekonstruieren. Diese Daten wurden im Vergleich zu größerskaligen Rekonstruktionen aus der Region ausgewertet. Es konnte gezeigt werden, (I) dass die Höchstwerte im spektralen Amplitudenverhältnis, die für den eindimensionalen Fall eines 3-Schicht-Systems modelliert wurden, mit der Auftautiefe zusammenhingen. Seismische Instrumente wurden auf dem Meeresboden um die Insel Muostakh, in der zentralen Laptewsee gelegen, ausgebracht. Die gefundenen Tiefen der eisgebundenen Permafrosttafel lagen zwischen 3.7-20.7 m ± 15 %, und nahmen mit zunehmender Entfernung zur Küste zu. (II) Die modellierten Temperaturen während des Übergangs zum submarinen Permafrost entsprachen ab etwa 2000 Jahren nach der Überflutung isothermischen Bedingungen bei Cape Mamontov Klyk, in Übereinstimmung zu den Beobachtungen in den Bohrlöchern. Stratigrafische Szenarien zeigten, dass die Salzverteilung und -infiltration großen Einfluß auf den Sättigungszustand des Poreneises im Sediment hatte. Drei Schlüsselfaktoren wurden identifiziert, welche, wenn diese verändert wurden, die modellierte Auftautiefe des Permafrosts am stärksten beeinflussten: Die Temperaturen am Meeresboden, die Küstenerosionsrate und die Anfangstemperatur zum Zeitpunkt der Überflutung. Salztransport unter Berücksichtigung von Diffusion und beliebigen dichte-getriebenen Mechanismen unterschätzte die beobachteten Auftautiefen um circa 50 % über hunderte bis tausende von Jahren nach der Überflutung. Diese Abweichung wurde konsistent an allen drei Untersuchungsstandorten in der Laptewsee-Region gefunden. (III) In den Temperaturrekonstruktionen wurden deutliche Unterschiede im lokalen Temperaturverlauf zwischen den Standorten in der westlichen Laptewsee und im Lena Delta festgestellt. Dazu gehörte ein Übergang zu wärmeren Temperaturen ein Jahrhundert später in der westlichen Laptewsee, sowie ein Maximum der Erwärmung drei Jahrzehnte später als im Lena Delta. Die lokale Permafrost-Oberflächentemperaturhistorie auf der Insel Sardakh im Lena Delta glich den zirkumarktischen mittleren Trends. Im Gegensatz dazu stimmte Mamontov Klyk in der westlichen Laptewsee nur im jüngsten Jahrzehnt mit den arktischen Trends überein und glich vielmehr dem mittleren Trend der Nordhemisphäre. Beide Standorte stimmten mit einer schnellen, synoptischen und kürzlichen Erwärmung überein. Abschließend lässt sich festhalten, dass auf Grund der Übereinstimmung zwischen modelliertem Verhalten, erwarteter Permafrostverteilung und Beobachtungsdaten die passiv-seismische Methode vielversprechend für die Dickebestimmung der ungefrorenen Sedimente im arktischen Meeresboden ist. Durch die hier quantifizierte Diskrepanz zwischen aktuell modellierter und beobachteter Auftautiefen wird klar, dass die Auswirkung der Degradation auf Klimaantrieb, Ökosysteme und Infrastruktur größer ist als dies von aktuellen Modellen vorhergesagt wird. Um diese Diskrepanz zu eliminieren, müssen weitere bisher unberücksichtigte Mechanismen der Salzeindringung und des Auftauens vor oder nach der Überflutung in zukünftigen Modellen mit einbezogen werden. Des weiteren folgt aus dieser Arbeit, dass Modellierungen des submarinen Permafrosts die hier identifizierten Schlüsselfaktoren und ihre regionalen Unterschiede berücksichtigen müssen, um ihre Aussagekraft sicher zu stellen. Die Permafrostbohrlöcher liefern bisher fehlende, auf kurzer Zeitskala gut-aufgelöste Temperaturinformationen in der arktischen Küstentundra. Da lokale Abweichungen von zirkumarktischen Rekonstruktionen in dieser Region nachgewiesen werden konnten, stellen die Ergebnisse eine Grundlage für lokale Temperaturverlaufs-Parametrisierungen in Klima- und insbesondere Permafrostmodellen zur Verfügung. Die Ergebnisse dieser Arbeit weisen die Richtung für zukünftige Forschungs- und Modellierungsvorhaben und stellen einen wichtigen Schritt dar, um den Übergang von terrestrischem zu submarinem Permafrost zu verstehen. T2 - Submariner Permafrost in der Laptewsee KW - Subsea permafrost KW - Submarine permafrost KW - Inundation KW - Ambient noise KW - Passive seismic interferometry KW - H/V ratio KW - Coupled heat and mass transport KW - Salt transport KW - Diffusion KW - Temperature reconstruction KW - Borehole reconstruction KW - GST KW - Submariner Permafrost KW - Überflutung KW - seismisches Hintergrundrauschen KW - Passiv-seismische Interferometrie KW - H/V Verhältnis KW - Gekoppelter Wärme- und Massetransport KW - Salztransport KW - Diffusion KW - Temperaturerekonstruktion KW - Bohrloch-Rekonstruktion KW - GST Y1 - 2019 ER - TY - THES A1 - Krüsemann, Henning T1 - First passage phenomena and single-file motion in ageing continuous time random walks and quenched energy landscapes N2 - In der Physik gibt es viele Prozesse, die auf Grund ihrer Komplexität nicht durch physikalische Gleichungen beschrieben werden können, beispielsweise die Bewegung eines Staubkorns in der Luft. Durch die vielen Stöße mit Luftmolekülen führt es eine Zufallsbewegung aus, die so genannte Diffusion. Auch Moleküle in biologischen Zellen diffundieren, jedoch befinden sich in einer solchen Zelle im selben Volumen viel mehr oder viel größere Moleküle. Das beobachtete Teilchen stößt dementsprechend öfter mit anderen zusammen und die Diffusion wird langsamer, sie wird subdiffusiv. Mit der Zeit kann sich die Charakteristik der Subdiffusion ändern; dies wird als (mikroskopisches) Altern bezeichnet. Ich untersuche in der vorliegenden Arbeit zwei mathematische Modelle für eindimensionale Subdiffusion, einmal den continuous time random walk (CTRW) und einmal die Zufallsbewegung in einer eingefrorenen Energielandschaft (QEL=quenched energy landscape). Beide sind Sprungprozesse, das heißt, sie sind Abfolgen von räumlichen Sprüngen, die durch zufallsverteilte Wartezeiten getrennt sind. Die Wartezeiten in der QEL sind räumlich korrelliert, während sie im CTRW unkorrelliert sind. Ich untersuche in der vorliegenden Arbeit verschiedene statistische Größen in beiden Modellen. Zunächst untersuche ich den Einfluss des Alters und den Einfluss der Korrellationen einer QEL auf die Verteilung der Zeiten, die das diffundierendes Teilchen benötigt, um eine (räumliche) Schwelle zu überqueren. Ausserdem bestimme ich den Effekt des Alters auf Ströme von (sub)diffundierenden Partikeln, die sich auf eine absorbierende Barriere zubewegen. Zuletzt beschäftige ich mich mit der Diffusion einer eindimensionalen Anordnung von Teilchen in einer QEL, in der diese als harte Kugeln miteinander wechselwirken. Dabei vergleiche ich die gemeinsame Bewegung in einer QEL und als individuelle CTRWs miteinander über die Standartabweichung von der Startposition, für die ich das Mittel über mehrere QELs untersuche. Meine Arbeit setzt sich zusammen aus theoretischen Überlegungen und Berechnungen sowie der Simulation der Zufallsprozesse. Die Ergebnisse der Simulation und, soweit vorhanden, experimentelle Daten werden mit der Theorie verglichen. N2 - In the first part of my work I have investigated the ageing properties of the first passage time distributions in a one-dimensional subdiffusive continuous time random walk with power law distributed waiting times of the form $\psi(\tau) \sim \tau^{-1-\alpha}$ with $0<\alpha<1$ and $1<\alpha<2$. The age or ageing time $t_a$ is the time span from the start of the stochastic process to the start of the observation of this process (at $t=0$). I have calculated the results for a single target and two targets, also including the biased case, where the walker is driven towards the boundary by a constant force. I have furthermore refined the previously derived results for the non-ageing case and investigated the changes that occur when the walk is performed in a discrete quenched energy landscape, where the waiting times are fixed for every site. The results include the exact Laplace space densities and infinite (converging) series as exact results in the time space. The main results are the dominating long time power law behavior regimes, which depend on the ageing time. For the case of unbiased subdiffusion ($\alpha < 1$) in the presence of one target, I find three different dominant terms for ranges of $t$ separated by $t_a$ and another crossover time $t^{\star}$, which depends on $t_a$ as well as on the anomalous exponent $\alpha$ and the anomalous diffusion coefficient $K_{\alpha}$. In all three regimes ($t \ll t_a$, $t_a \ll t \ll t^{\star}$, $t \gg t^{\star}$) one finds power law decay with exponents depending on $\alpha$. The middle regime only exists for $t_a \ll t^{\star}$. The dominant terms in the first two regimes (ageing regimes) come from the probability distribution of the forward waiting time, the time one has to wait for the stochastic process to make the first step during the observation. When the observation time is larger than the second crossover time $t^{\star}$, the first passage time density does not show ageing and the non-ageing first passage time dominates. The power law exponents in the respective regimes are $-\alpha$ for strong ageing, $-1-\alpha$ in the intermediate regime, and $-1-\alpha/2$ in the final non-ageing regime. A similar split into three regimes can be found for $1<\alpha<2$, only with a different second crossover time $t^*$. In this regime the diffusion is normal but also age-dependent. For the diffusion in quenched energy landscapes one cannot detect ageing. The first passage time density shows a quenched power law $^\sim t^{-(1+2\alpha)/(1+\alpha)}$. For diffusion between two target sites and the biased diffusion towards a target only two scaling regimes emerge, separated by the ageing time. In the ageing case $t \ll t_a$ the forward waiting time is again dominant with power law exponent $-\alpha$, while the non-ageing power law $-1-\alpha$ is found for all times $t \gg t_a$. An intermediate regime does not exist. The bias and the confinement have similar effects on the first passage time density. For quenched diffusion, the biased case is interesting, as the bias reduces correlations due to revisiting of the same waiting time. As a result, CTRW like behavior is observed, including ageing. Extensive computer simulations support my findings. The second part of my research was done on the subject of ageing Scher-Montroll transport, which is in parts closely related to the first passage densities. It explains the electrical current in an amorphous material. I have investigated the effect of the width of a given initial distribution of charge carriers on the transport coefficients as well as the ageing effect on the emerging power law regimes and a constant initial regime. While a spread out initial distribution has only little impact on the Scher-Montroll current, ageing alters the behavior drastically. Instead of the two classical power laws one finds four current regimes, up to three of which can appear in a single experiment. The dominant power laws differ for $t \ll t_a, t_c$, $t_a \ll t \ll t_c$, $t_c \ll t \ll t_a$, and $t \gg t_a,t_c$. Here, $t_c$ is the crossover time of the non-aged Scher-Montroll current. For strongly aged systems one can observe a constant current in the first regime while the others are dominated by decaying power laws with exponents $\alpha -1$, $-\alpha$, and $-1-\alpha$. The ageing regimes are the 1st and 3rd one, while the classical regimes are the 2nd and the 4th. I have verified the theory using numerical integration of the exact integrals and applied the new results to experimental data. In the third part I considered a single file of subdiffusing particles in an energy landscape. Every occupied site of the landscape acts as a boundary, from which a particle is immediately reflected to its previous site, if it tries to jump there. I have analysed the effects single-file diffusion a quenched landscape compared to an annealed landscape and I have related these results to the number of steps and related quantities. The diffusion changes from ultraslow logarithmic diffusion in the annealed or CTRW case to subdiffusion with an anomalous exponent $\alpha/(1+\alpha)$ in the quenched landscape. The behavior is caused by the forward waiting time, which changes drastically from the quenched to the annealed case. Single-file effects in the quenched landscape are even more complicated to consider in the ensemble average, since the diffusion in individual landscapes shows extremely diverse behavior. Extensive simulations support my theoretical arguments, which consider mainly the long time evolution of the mean square displacement of a bulk particle. KW - continuous time random walk KW - quenched energy landscape KW - first passage time KW - Scher-Montroll transport KW - single-file motion KW - Zufallsbewegung KW - Diffusion KW - eingefrorene Energielandschaft KW - Scher-Montroll Transport KW - Wartezeitverteilung Y1 - 2016 ER - TY - THES A1 - Mulansky, Mario T1 - Chaotic diffusion in nonlinear Hamiltonian systems T1 - Chaotische Diffusion in nichtlinearen Hamiltonschen Systemen N2 - This work investigates diffusion in nonlinear Hamiltonian systems. The diffusion, more precisely subdiffusion, in such systems is induced by the intrinsic chaotic behavior of trajectories and thus is called chaotic diffusion''. Its properties are studied on the example of one- or two-dimensional lattices of harmonic or nonlinear oscillators with nearest neighbor couplings. The fundamental observation is the spreading of energy for localized initial conditions. Methods of quantifying this spreading behavior are presented, including a new quantity called excitation time. This new quantity allows for a more precise analysis of the spreading than traditional methods. Furthermore, the nonlinear diffusion equation is introduced as a phenomenologic description of the spreading process and a number of predictions on the density dependence of the spreading are drawn from this equation. Two mathematical techniques for analyzing nonlinear Hamiltonian systems are introduced. The first one is based on a scaling analysis of the Hamiltonian equations and the results are related to similar scaling properties of the NDE. From this relation, exact spreading predictions are deduced. Secondly, the microscopic dynamics at the edge of spreading states are thoroughly analyzed, which again suggests a scaling behavior that can be related to the NDE. Such a microscopic treatment of chaotically spreading states in nonlinear Hamiltonian systems has not been done before and the results present a new technique of connecting microscopic dynamics with macroscopic descriptions like the nonlinear diffusion equation. All theoretical results are supported by heavy numerical simulations, partly obtained on one of Europe's fastest supercomputers located in Bologna, Italy. In the end, the highly interesting case of harmonic oscillators with random frequencies and nonlinear coupling is studied, which resembles to some extent the famous Discrete Anderson Nonlinear Schroedinger Equation. For this model, a deviation from the widely believed power-law spreading is observed in numerical experiments. Some ideas on a theoretical explanation for this deviation are presented, but a conclusive theory could not be found due to the complicated phase space structure in this case. Nevertheless, it is hoped that the techniques and results presented in this work will help to eventually understand this controversely discussed case as well. N2 - Diese Arbeit beschäftigt sich mit dem Phänomen der Diffusion in nichtlinearen Systemen. Unter Diffusion versteht man normalerweise die zufallsmä\ss ige Bewegung von Partikeln durch den stochastischen Einfluss einer thermodynamisch beschreibbaren Umgebung. Dieser Prozess ist mathematisch beschrieben durch die Diffusionsgleichung. In dieser Arbeit werden jedoch abgeschlossene Systeme ohne Einfluss der Umgebung betrachtet. Dennoch wird eine Art von Diffusion, üblicherweise bezeichnet als Subdiffusion, beobachtet. Die Ursache dafür liegt im chaotischen Verhalten des Systems. Vereinfacht gesagt, erzeugt das Chaos eine intrinsische Pseudo-Zufälligkeit, die zu einem gewissen Grad mit dem Einfluss einer thermodynamischen Umgebung vergleichbar ist und somit auch diffusives Verhalten provoziert. Zur quantitativen Beschreibung dieses subdiffusiven Prozesses wird eine Verallgemeinerung der Diffusionsgleichung herangezogen, die Nichtlineare Diffusionsgleichung. Desweiteren wird die mikroskopische Dynamik des Systems mit analytischen Methoden untersucht, und Schlussfolgerungen für den makroskopischen Diffusionsprozess abgeleitet. Die Technik der Verbindung von mikroskopischer Dynamik und makroskopischen Beobachtungen, die in dieser Arbeit entwickelt wird und detailliert beschrieben ist, führt zu einem tieferen Verständnis von hochdimensionalen chaotischen Systemen. Die mit mathematischen Mitteln abgeleiteten Ergebnisse sind darüber hinaus durch ausführliche Simulationen verifiziert, welche teilweise auf einem der leistungsfähigsten Supercomputer Europas durchgeführt wurden, dem sp6 in Bologna, Italien. Desweiteren können die in dieser Arbeit vorgestellten Erkenntnisse und Techniken mit Sicherheit auch in anderen Fällen bei der Untersuchung chaotischer Systeme Anwendung finden. KW - Chaos KW - Diffusion KW - Thermalisierung KW - Energieausbreitung KW - chaos KW - diffusion KW - thermalization KW - energy spreading Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-63180 ER - TY - THES A1 - Roder, Phillip T1 - Kombination von Fluoreszenzmikroskopie und Rasterkraftmikroskopie zur Aufklärung physiologischer Prozesse in lebenden Zellen T1 - Combination of fluorescence microscopy and atomic force microscopy for the investigation of physiological processes in living cells BT - Charakterisierung und Anwendung einer neuartigen lokalen Mikromanipulationstechnik BT - characterisation and application of a novel local micromanipulation technique N2 - Innerhalb dieser Doktorarbeit wurde eine neuartige Mikromanipulationstechnik für die lokale Flüssigkeitsabgabe am komplexen Drüsengewebe der Schabe P. americana charakterisiert und für die damit verbundene gezielte Manipulation von einzelnen Zellen in einem Zellkomplex (Gewebe) angewandt. Bei dieser Mikromanipulationstechnik handelt es sich um die seit 2009 bekannte nanofluidische Rasterkraftmikroskopie (FluidFM = fluidic force microscopy). Dabei werden sehr kleine mikrokanälige Rasterkraftspitzen bzw. Mikro-/Nanopipetten mit einer Öffnung zwischen 300 nm und 2 µm verwendet, mit denen es möglich ist, sehr kleine Volumina im Pikoliter- bis Femtoliter-Bereich (10-12 L – 10-15 L) gezielt und ortsgenau abzugeben. Das Ziel dieser Arbeit war die Analyse zellulärer Prozesse, wie z. B. Zell-Zell-Kommunikation oder Signalweiterleitung, zwischen benachbarten Zellen unter Zuhilfenahme der Fluoreszenzmikroskopie. Mit dieser Methode können die Zellen und ihre Bestandteile mittels vorheriger Farbstoffbeladung unter einem Mikroskop mit hohem Kontrast optisch dargestellt werden. Mit Hilfe der Fluoreszenzmikroskopie sollten schlussendlich die zellulären Reaktionen innerhalb des Gewebes nach der lokalen Manipulation visualisiert werden. Zunächst wurde die Anwendung des Systems an Luft und wässriger Umgebung beschrieben. In diesem Zusammenhang wurde eine Reinigungs- und Beladungsmethode entwickelt, mit der es möglich war, die kostspieligen Mikro-/Nanopipetten zu reinigen und anschließend mehrmals wiederzuverwenden. Hierzu wurde eine alternative Methode getestet, mit der das Diffusionsverhalten von Farbstoffmolekülen in unterschiedlichen Medien untersucht werden kann. Des Weiteren wurden die Systemparameter optimiert, welche nötig sind, um zwischen der Probenoberfläche und der Pipette einen guten Pipettenöffnungs-abschluss zu erhalten. Dieser Abschluss ist essentiell, damit die abgegebene Flüssigkeit ausschließlich in der Abgaberegion mit der Probe wechselwirkt und die darauffolgenden Reaktionen nur innerhalb des Gewebes erfolgen, da ansonsten die Zell-Zell-Signalweiterleitung zwischen den Zellen nicht eindeutig nachvollzogen werden kann. Diese interzelluläre Kommunikation wurde anhand zweier sekundärer Botenstoffe (Ca2+ und NO) untersucht. Hierbei war es möglich einzelne lokale Reaktionen zu detektieren, welche sich über weitere Zellen ausbreiteten. Schlussendlich wurde die Fertigung einer speziellen Injektionspipette beschrieben, welche an zwei biologischen Systemen getestet wurde. N2 - Within this thesis, a novel micromanipulation technique was characterised for the local liquid delivery at the complex salivary glands tissue of the cockroach P. americana and was applied for the associated targeted manipulation of single cells in a cell complex (tissue). This micromanipulation technique is known since 2009 as the fluidic force microscopy (FluidFM) technique. In this case, very small microchanneled AFM tips or rather micro-/nanopipettes with an opening between 300 nm and 2 μm are used to deliver very small volumes in the picoliter to femtoliter range (10-12 L - 10-15 L) targeted and accurate. The aim of this work was the analysis of cellular processes, such as cell-cell communication or signal transduction, between adjacent cells using fluorescence microscopy. Using this method, the cells and their components can be optically visualised by prior dye loading under a microscope with high contrast. Using fluorescence microscopy, the cellular responses within the tissue were finally visualised after local manipulation. First, the application of the system in air and aqueous environment was described. In this context, a cleaning and loading method was developed which allows the cleaning and the repeated reuse of the expensive micro-/nanopipettes. For this purpose, an alternative method has been tested, with which the diffusion of dye molecules in different media can be examined. Furthermore, the system parameters needed to obtain a good pipette opening sealing between the sample surface and the pipette have been optimised. This sealing is essential to ensure that the delivered liquid interacts only with the sample in the delivery region and that subsequent reactions occur only within the tissue, otherwise cell-cell signaling between the cells can not be clearly understood. This intercellular communication was studied by means of two secondary messengers (Ca2+ and NO). Here it was possible to detect individual local reactions that spread over more cells. Finally, the production of a special injection pipette was described, which was tested on two biological systems. KW - Rasterkraftmikroskopie KW - Fluoreszenzmikroskopie KW - Mikromanipulation KW - Zellgewebe KW - Diffusion KW - atomic force microscopy KW - fluorescence microscopy KW - micromanipulation KW - cellular tissue KW - diffusion Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419806 ER - TY - THES A1 - Spallanzani, Roberta T1 - Li and B in ascending magmas: an experimental study on their mobility and isotopic fractionation T1 - Li und B in aufsteigenden Magmen: eine experimentelle Studie über ihre Mobilität und Isotopenfraktionierung N2 - This research study focuses on the behaviour of Li and B during magmatic ascent, and decompression-driven degassing related to volcanic systems. The main objective of this dissertation is to determine whether it is possible to use the diffusion properties of the two trace elements as a tool to trace magmatic ascent rate. With this objective, diffusion-couple and decompression experiments have been performed in order to study Li and B mobility in intra-melt conditions first, and then in an evolving system during decompression-driven degassing. Synthetic glasses were prepared with rhyolitic composition and an initial water content of 4.2 wt%, and all the experiments were performed using an internally heated pressure vessel, in order to ensure a precise control on the experimental parameters such as temperature and pressure. Diffusion-couple experiments were performed with a fix pressure 300 MPa. The temperature was varied in the range of 700-1250 °C with durations between 0 seconds and 24 hours. The diffusion-couple results show that Li diffusivity is very fast and starts already at very low temperature. Significant isotopic fractionation occurs due to the faster mobility of 6Li compared to 7Li. Boron diffusion is also accelerated by the presence of water, but the results of the isotopic ratios are unclear, and further investigation would be necessary to well constrain the isotopic fractionation process of boron in hydrous silicate melts. The isotopic ratios results show that boron isotopic fractionation might be affected by the speciation of boron in the silicate melt structure, as 10B and 11B tend to have tetrahedral and trigonal coordination, respectively. Several decompression experiments were performed at 900 °C and 1000 °C, with pressures going from 300 MPa to 71-77 MPa and durations of 30 minutes, two, five and ten hours, in order to trigger water exsolution and the formation of vesicles in the sample. Textural observations and the calculation of the bubble number density confirmed that the bubble size and distribution after decompression is directly proportional to the decompression rate. The overall SIMS results of Li and B show that the two trace elements tend to progressively decrease their concentration with decreasing decompression rates. This is explained because for longer decompression times, the diffusion of Li and B into the bubbles has more time to progress and the melt continuously loses volatiles as the bubbles expand their volumes. For fast decompression, Li and B results show a concentration increase with a δ7Li and δ11B decrease close to the bubble interface, related to the sudden formation of the gas bubble, and the occurrence of a diffusion process in the opposite direction, from the bubble meniscus to the unaltered melt. When the bubble growth becomes dominant and Li and B start to exsolve into the gas phase, the silicate melt close to the bubble gets depleted in Li and B, because of a stronger diffusion of the trace elements into the bubble. Our data are being applied to different models, aiming to combine the dynamics of bubble nucleation and growth with the evolution of trace elements concentration and isotopic ratios. Here, first considerations on these models will be presented, giving concluding remarks on this research study. All in all, the final remarks constitute a good starting point for further investigations. These results are a promising base to continue to study this process, and Li and B can indeed show clear dependences on decompression-related magma ascent rates in volcanic systems. N2 - Diese Forschungsstudie konzentriert sich auf das Verhalten von Li und B während des magmatischen Aufstiegs und der Druckentlastungsbedingten Entgasung im Zusammenhang mit vulkanischen Systemen. Das Hauptziel dieser Dissertation besteht darin, festzustellen, ob es möglich ist, die Diffusionseigenschaften der beiden Spurenelemente als Instrument zur Verfolgung der magmatischen Aufstiegsgeschwindigkeit zu nutzen. Unter Verwendung von synthetischen Gläsern mit rhyolitischer Zusammensetzung und einem Wassergehalt von 4,2 Gew.-% wurden Diffusionspaar- und Druckentlastungsexperimente durchgeführt, um die Mobilität von Li und B zunächst in der Schmelze und dann in einem sich entwickelnden System während der Druckentlastungsgetriebenen Entgasung zu untersuchen. Diffusionspaar wurden mit einem festen Druck von 300 MPa durchgeführt. Die Temperatur wurde im Bereich von 700-1250 °C variiert, wobei die Dauer zwischen 0 Sekunden und 24 Stunden lag. Unsere Ergebnisse zeigen, dass die Diffusionsfähigkeit von Li sehr schnell ist und bei sehr niedrigen Temperaturen auftritt. Eine Isotopenfraktionierung findet aufgrund der schnelleren Mobilität von 6Li im Vergleich zu 7Li statt. Die Diffusion von Bor wird durch die Anwesenheit von Wasser ebenfalls beschleunigt, bleibt aber langsamer als die von Li. Die Ergebnisse der Isotopenverhältnisse zeigen, dass die Bor-Isotopenfraktionierung durch die Speziation von Bor in der Silikatschmelze beeinflusst werden könnte, da 10B und 11B tendenziell eine tetraedrische bzw. trigonale Koordination aufweisen. Druckentlastungsversuche wurden bei 900 °C und 1000 °C mit Drücken von 300 MPa bis 71-77 MPa und einer Dauer von 30 Minuten, zwei, fünf und zehn Stunden durchgeführt, um die Wasserauflösung und die Bildung von Gasblasen in der Probe auszulösen. Texturbeobachtungen und die Berechnung der Blasenanzahldichte bestätigten, dass die Blasengröße und -verteilung nach der Druckentlastung direkt proportional zur Druckentlastungsrate ist. Generell zeigen die SIMS-Analysergebnisse von Li und B, dass die Konzentration der beiden Spurenelemente mit abnehmender Druckentlastungsgeschwindigkeit allmählich abnimmt. Dies ist darauf zurückzuführen, dass bei längeren Druckentlastungszeiten mehr Zeit für die Diffusion von Li und B in die Blasen zur Verfügung steht und die Schmelze kontinuierlich flüchtige Bestandteile verliert, während die Blasen ihr Volumen ausdehnen. Bei schnellen Druckentlastungen zeigen die Li- und B-Ergebnisse einen Konzentrationsanstieg mit einer δ7Li- und δ11B-Abnahme in der Nähe der Blasengrenzfläche, was mit der plötzlichen Bildung der Glasbläser und dem Auftreten eines Diffusionsprozesses in der entgegengesetzten Richtung, vom Blasenmeniskus zur unveränderten Schmelze, zusammenhängt. Wenn das Blasenwachstum dominiert und Li und B in die Gasphase übergehen, verarmt die Silikat Schmelze in der Nähe der Blase an Li und B, da die Spurenelemente stärker in die Blase diffundieren. Unsere Daten werden auf verschiedene Modelle angewandt, die darauf abzielen, die Dynamik der Blasenkernbildung und des Blasenwachstums mit der Entwicklung der Spurenelementkonzentration und des Isotopenverhältnisses zu kombinieren. Hier werden erste Überlegungen zu diesen Modellen vorgestellt und abschließende Bemerkungen zu dieser Forschungsstudie gemacht. Diese Ergebnisse sind eine vielversprechende Grundlage für die weitere Untersuchung von Li und B, um dekompressionsbedingte Magma-Aufstiegsraten in vulkanischen Systemen zu ermitteln. KW - magma degassing KW - diffusion KW - stable isotopes KW - isotopic fractionation KW - Diffusion KW - Isotopenfraktionierung KW - Magma-Entgasung KW - stabile Isotope Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-560619 ER -