TY - JOUR A1 - Al-Naji, Majd A1 - Schlaad, Helmut A1 - Antonietti, Markus T1 - New (and old) monomers from biorefineries to make polymer chemistry more sustainable JF - Macromolecular rapid communications N2 - This opinion article describes recent approaches to use the "biorefinery" concept to lower the carbon footprint of typical mass polymers, by replacing parts of the fossil monomers with similar or even the same monomer made from regrowing dendritic biomass. Herein, the new and green catalytic synthetic routes are for lactic acid (LA), isosorbide (IS), 2,5-furandicarboxylic acid (FDCA), and p-xylene (pXL). Furthermore, the synthesis of two unconventional lignocellulosic biomass derivable monomers, i.e., alpha-methylene-gamma-valerolactone (MeGVL) and levoglucosenol (LG), are presented. All those have the potential to enter in a cost-effective way, also the mass market and thereby recover lost areas for polymer materials. The differences of catalytic unit operations of the biorefinery are also discussed and the challenges that must be addressed along the synthesis path of each monomers. KW - biodegradable polymers KW - biorefineries KW - carbohydrate‐ based KW - monomers KW - green polymers KW - lignocellulosic biomass Y1 - 2020 U6 - https://doi.org/10.1002/marc.202000485 SN - 1022-1336 SN - 1521-3927 VL - 42 IS - 3 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Al-Naji, Majd A1 - Schlaad, Helmut A1 - Antonietti, Markus T1 - New (and old) monomers from biorefineries to make polymer chemistry more sustainable T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - This opinion article describes recent approaches to use the "biorefinery" concept to lower the carbon footprint of typical mass polymers, by replacing parts of the fossil monomers with similar or even the same monomer made from regrowing dendritic biomass. Herein, the new and green catalytic synthetic routes are for lactic acid (LA), isosorbide (IS), 2,5-furandicarboxylic acid (FDCA), and p-xylene (pXL). Furthermore, the synthesis of two unconventional lignocellulosic biomass derivable monomers, i.e., alpha-methylene-gamma-valerolactone (MeGVL) and levoglucosenol (LG), are presented. All those have the potential to enter in a cost-effective way, also the mass market and thereby recover lost areas for polymer materials. The differences of catalytic unit operations of the biorefinery are also discussed and the challenges that must be addressed along the synthesis path of each monomers. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1385 KW - biodegradable polymers KW - biorefineries KW - carbohydrate‐ based KW - monomers KW - green polymers KW - lignocellulosic biomass Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-570614 SN - 1866-8372 IS - 1385 ER - TY - JOUR A1 - Behrendt, Felix Nicolas A1 - Hess, Andreas A1 - Lehmann, Max A1 - Schmidt, Bernd A1 - Schlaad, Helmut T1 - Polymerization of cystine-derived monomers JF - Polymer Chemistry N2 - Cystine was used as a platform chemical to prepare cyclic and acyclic monomers for entropy-driven ringopening polymerization (ED-ROMP) via olefin or disulfide metathesis and for step-growth polymerization. The olefin ED-ROMP of an olefin/disulfide containing 16-atom macrocycle using the 3rd generation Grubbs catalyst was examined in greater detail. Kinetic studies revealed that the catalyst turned inactive during the polymerization, which limited the achievable (apparent) polymer molar mass to similar to 70 kg mol(-1). Such limitation could be overcome with the disulfide ED-ROMP of the same macrocycle to yield polymers with molar masses of up to 180 kg mol(-1). The step-growth polymerizations of acyclic diene and dithiol monomers via olefin metathesis or oxidation were far less effective and yielded just low molar mass polymers or oligomers; photopolymerization of a thiol-ene monomer produced a polyester with a molar mass of 35 kg mol(-1). Y1 - 2019 U6 - https://doi.org/10.1039/c9py00118b SN - 1759-9954 SN - 1759-9962 VL - 10 IS - 13 SP - 1636 EP - 1641 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Behrendt, Felix Nicolas A1 - Schlaad, Helmut T1 - Metathesis polymerization of cystine-based macrocycles N2 - Macrocycles based on L-cystine were synthesized by ring-closing metathesis (RCM) and subsequently polymerized by entropy-driven ring-opening metathesis polymerization (ED-ROMP). Monomer conversion reached ∼80% in equilibrium and the produced poly(ester-amine-disulfide-alkene)s exhibited apparent molar masses (Mappw) of up to 80 kDa and dispersities (Đ) of ∼2. The polymers can be further functionalized with acid anhydrides and degraded by reductive cleavage of the main-chain disulfide. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 329 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-395080 ER - TY - JOUR A1 - Behrendt, Felix Nicolas A1 - Schlaad, Helmut T1 - Entropy-Driven Ring-Opening Disulfide Metathesis Polymerization for the Synthesis of Functional Poly(disulfide)s JF - Macromolecular rapid communications N2 - Metal-free entropy-driven disulfide metathesis polymerization of unsaturated L-cystine based macrocycles produces high-molar-mass heterofunctional poly(disulfide)s, i.e., poly(ester-disulfide-alkene) and poly(amide-disulfide-alkene); M-w(app) = 44-60 kDa, (sic) > 1.7. The polymerization is fast and reaches equilibrium within 1-5 minutes (monomer conversion 70-90%) in polar aprotic solvents such as N,N-dimethylacetamide, dimethylsulfoxide, or y-valerolactone. Thiol-terminated polymers are stable in bulk or when dissolved in weakly polar solvents, but rapidly depolymerize in dilute polar solution. KW - disulfide KW - macrocycles KW - metathesis KW - ring-opening polymerization Y1 - 2018 U6 - https://doi.org/10.1002/marc.201700735 SN - 1022-1336 SN - 1521-3927 VL - 39 IS - 6 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Behrendt, Felix Nicolas A1 - Schlaad, Helmut T1 - Metathesis polymerization of cystine-based macrocycles JF - Polymer Chemistry N2 - Macrocycles based on L-cystine were synthesized by ring-closing metathesis (RCM) and subsequently polymerized by entropy-driven ring-opening metathesis polymerization (ED-ROMP). Monomer conversion reached similar to 80% in equilibrium and the produced poly (ester-amine-disulfide-alkene)s exhibited apparent molar masses (M-w(app)) of up to 80 kDa and dispersities (D) of similar to 2. The polymers can be further functionalized with acid anhydrides and degraded by reductive cleavage of the main-chain disulfide. Y1 - 2016 U6 - https://doi.org/10.1039/c6py01864e SN - 1759-9954 SN - 1759-9962 VL - 8 IS - 2 SP - 366 EP - 369 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Bogomolova, Anna A1 - Secker, Christian A1 - Koetz, Joachim A1 - Schlaad, Helmut T1 - Thermo-induced multistep assembly of double-hydrophilic block copolypeptoids in water JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - The aqueous solution behavior of thermoresponsive-hydrophilic block copolypeptoids, i.e., poly(N-(n-propyl)glycine) (x) -block-poly(N-methylglycine) (y) (x = 70; y = 23, 42, 76), in the temperature range of 20-45 A degrees C is studied. Turbidimetric analyses of the 0.1 wt% aqueous solutions reveal two cloud points at T (cp)similar to 30 and 45 A degrees C and a clearing point in between at T (cl)similar to 42 A degrees C. Temperature-dependent dynamic light scattering (DLS) suggest that right above the first collapse temperature, single polymer molecules assemble into large structures which upon further heating, i.e., at the clearing point temperature, disassemble into micelle-like structures. Upon further heating, the aggregates start to grow again in size, as recognized by the second cloud point, through a crystallization process. KW - Polypeptoids KW - Block copolymers KW - Thermoresponsive KW - Self-assembly Y1 - 2017 U6 - https://doi.org/10.1007/s00396-017-4044-6 SN - 0303-402X SN - 1435-1536 VL - 295 SP - 1305 EP - 1312 PB - Springer CY - New York ER - TY - JOUR A1 - Brosnan, Sarah M. A1 - Schlaad, Helmut T1 - Modification of polypeptide materials by Thiol-X chemistry JF - Polymer : the international journal for the science and technology of polymers N2 - Thiol-X chemistry has proven to be a valuable toolbox for modification of peptides, proteins, monomers, and polymers. Recently, this has become especially true for the modification of polypeptides (monomers or polymers), which has resulted in a plethora of novel polymers and materials. With this in mind, this highlight focuses on the recent literature concerning the modification of polypeptides by the use of thiol-X chemistry, in particular to synthetic polypeptides either at the monomer or polymer stage modified by thiol-ene, -Michael addition, and -yne chemistries. (C) 2014 Published by Elsevier Ltd. KW - Polypeptide KW - Thiol-X KW - Click chemistry Y1 - 2014 U6 - https://doi.org/10.1016/j.polymer.2014.08.067 SN - 0032-3861 SN - 1873-2291 VL - 55 IS - 22 SP - 5511 EP - 5516 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Brosnan, Sarah M. A1 - Schlaad, Helmut A1 - Antonietti, Markus T1 - Aqueous Self-Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Self-assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self-assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500nm) and microsized (>5m) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics. KW - block copolymers KW - polymersomes KW - polysaccharides KW - self-assembly KW - vesicles Y1 - 2015 U6 - https://doi.org/10.1002/anie.201502100 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 33 SP - 9715 EP - 9718 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Casse, Olivier A1 - Shkilnyy, Andriy A1 - Linders, Jürgen A1 - Mayer, Christian A1 - Häussinger, Daniel A1 - Völkel, Antje A1 - Thünemann, Andreas F. A1 - Dimova, Rumiana A1 - Cölfen, Helmut A1 - Meier, Wolfgang P. A1 - Schlaad, Helmut A1 - Taubert, Andreas T1 - Solution behavior of double-hydrophilic block copolymers in dilute aqueous solution JF - Macromolecules : a publication of the American Chemical Society N2 - The self-assembly of double-hydrophilic poly(ethylene oxide)-poly(2-methyl-2-oxazoline) diblock copolymers in water has been studied. Isothermal titration calorimetry, small-angle X-ray scattering, and analytical ultracentrifugation suggest that only single polymer chains are present in solution. In contrast, light scattering and transmission electron microscopy detect aggregates with radii of ca. 100 nm. Pulsed field gradient NMR spectroscopy confirms the presence of aggregates, although only 2% of the polymer chains undergo aggregation. Water uptake experiments indicate differences in the hydrophilicity of the two blocks, which is believed to be the origin of the unexpected aggregation behavior (in accordance with an earlier study by Ke et al. [Macromolecules 2009, 42, 5339-5344]). The data therefore suggest that even in double-hydrophilic block copolymers, differences in hydrophilicity are sufficient to drive polymer aggregation, a phenomenon that has largely been overlooked or ignored so far. Y1 - 2012 U6 - https://doi.org/10.1021/ma300621g SN - 0024-9297 VL - 45 IS - 11 SP - 4772 EP - 4777 PB - American Chemical Society CY - Washington ER -