TY - GEN A1 - Gholamrezaie, Ershad A1 - Scheck-Wenderoth, Magdalena A1 - Bott, Judith A1 - Heidbach, Oliver A1 - Strecker, Manfred T1 - 3-D crustal density model of the Sea of Marmara T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Abstract. The Sea of Marmara, in northwestern Turkey, is a transition zone where the dextral North Anatolian Fault zone (NAFZ) propagates westward from the Anatolian Plate to the Aegean Sea Plate. The area is of interest in the context of seismic hazard of Istanbul, a metropolitan area with about 15 million inhabitants. Geophysical observations indicate that the crust is heterogeneous beneath the Marmara basin, but a detailed characterization of the crustal heterogeneities is still missing. To assess if and how crustal heterogeneities are related to the NAFZ segmentation below the Sea of Marmara, we develop new crustal-scale 3-D density models which integrate geological and seismological data and that are additionally constrained by 3-D gravity modeling. For the latter, we use two different gravity datasets including global satellite data and local marine gravity observation. Considering the two different datasets and the general non-uniqueness in potential field modeling, we suggest three possible “end-member” solutions that are all consistent with the observed gravity field and illustrate the spectrum of possible solutions. These models indicate that the observed gravitational anomalies originate from significant density heterogeneities within the crust. Two layers of sediments, one syn-kinematic and one pre-kinematic with respect to the Sea of Marmara formation are underlain by a heterogeneous crystalline crust. A felsic upper crystalline crust (average density of 2720 kgm⁻³) and an intermediate to mafic lower crystalline crust (average density of 2890 kgm⁻³) appear to be cross-cut by two large, dome-shaped mafic highdensity bodies (density of 2890 to 3150 kgm⁻³) of considerable thickness above a rather uniform lithospheric mantle (3300 kgm⁻³). The spatial correlation between two major bends of the main Marmara fault and the location of the highdensity bodies suggests that the distribution of lithological heterogeneities within the crust controls the rheological behavior along the NAFZ and, consequently, maybe influences fault segmentation and thus the seismic hazard assessment in the region. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 737 KW - North Anatolian Fault KW - Shear Zone KW - Northwestern Anatolia KW - Geomechanical Model KW - Tectonic Evolution KW - Slip Distribution KW - Middle Strand KW - Pull-Apart KW - Long-Term KW - NW Turkey Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-434661 SN - 1866-8372 IS - 737 SP - 785 EP - 807 ER - TY - THES A1 - Vranic, Marija T1 - 3D Structure of the biomarker hepcidin-25 in its native state T1 - 3D-Struktur des Biomarkers Hepcidin-25 im eigenen nativen Zustand N2 - Hepcidin-25 (Hep-25) plays a crucial role in the control of iron homeostasis. Since the dysfunction of the hepcidin pathway leads to multiple diseases as a result of iron imbalance, hepcidin represents a potential target for the diagnosis and treatment of disorders of iron metabolism. Despite intense research in the last decade targeted at developing a selective immunoassay for iron disorder diagnosis and treatment and better understanding the ferroportin-hepcidin interaction, questions remain. The key to resolving these underlying questions is acquiring exact knowledge of the 3D structure of native Hep-25. Since it was determined that the N-terminus, which is responsible for the bioactivity of Hep-25, contains a small Cu(II)-binding site known as the ATCUN motif, it was assumed that the Hep-25-Cu(II) complex is the native, bioactive form of the hepcidin. This structure has thus far not been elucidated in detail. Owing to the lack of structural information on metal-bound Hep-25, little is known about its possible biological role in iron metabolism. Therefore, this work is focused on structurally characterizing the metal-bound Hep-25 by NMR spectroscopy and molecular dynamics simulations. For the present work, a protocol was developed to prepare and purify properly folded Hep-25 in high quantities. In order to overcome the low solubility of Hep-25 at neutral pH, we introduced the C-terminal DEDEDE solubility tag. The metal binding was investigated through a series of NMR spectroscopic experiments to identify the most affected amino acids that mediate metal coordination. Based on the obtained NMR data, a structural calculation was performed in order to generate a model structure of the Hep-25-Ni(II) complex. The DEDEDE tag was excluded from the structural calculation due to a lack of NMR restraints. The dynamic nature and fast exchange of some of the amide protons with solvent reduced the overall number of NMR restraints needed for a high-quality structure. The NMR data revealed that the 20 Cterminal Hep-25 amino acids experienced no significant conformational changes, compared to published results, as a result of a pH change from pH 3 to pH 7 and metal binding. A 3D model of the Hep-25-Ni(II) complex was constructed from NMR data recorded for the hexapeptideNi(II) complex and Hep-25-DEDEDE-Ni(II) complex in combination with the fixed conformation of 19 C-terminal amino acids. The NMR data of the Hep-25-DEDEDE-Ni(II) complex indicates that the ATCUN motif moves independently from the rest of the structure. The 3D model structure of the metal-bound Hep-25 allows for future works to elucidate hepcidin’s interaction with its receptor ferroportin and should serve as a starting point for the development of antibodies with improved selectivity. N2 - Hepcidin-25 (Hep-25) spielt eine entscheidende Rolle bei der Kontrolle der Eisenhomöostase. Da die Dysfunktion des Hepcidin-Signalweges aufgrund des Eisenungleichgewichts zu mehreren Krankheiten führt, stellt Hepcidin ein potenzielles Ziel für die Diagnose und Behandlung von Störungen des Eisenstoffwechsels dar. Trotz intensiver Forschung in den letzten zehn Jahren, die darauf abzielte, einen selektiven Immunoassay für die Diagnose und Behandlung von Eisenerkrankungen zu entwickeln und die Ferroportin-Hepcidin-Interaktion besser zu verstehen, bleiben Fragen offen. Der Schlüssel zur Lösung dieser grundlegenden Fragen liegt darin, genaue Kenntnisse über die 3D-Struktur des nativen Hep-25 zu erlangen. Da festgestellt wurde, dass der N-Terminus, der für die Bioaktivität von Hep-25 verantwortlich ist, eine kleine Cu(II)-Bindungsstelle enthält, die als ATCUN-Motiv bekannt ist, wurde angenommen, dass der Hep-25- Cu(II)-Komplex die native, bioaktive Form des Hepcidins ist. Diese Struktur ist bisher noch nicht im Detail untersucht worden. Aufgrund fehlender Strukturinformationen über metallgebundenes Hep-25 ist wenig über seine mögliche biologische Rolle im Eisenstoffwechsel bekannt. Daher konzentriert sich diese Arbeit auf die strukturelle Charakterisierung des metallgebundenen Hep-25 mittels NMR-Spektroskopie und Molekulardynamik Simulationen. In der vorliegenden Arbeit wurde ein Protokoll zur Präparation und Reinigung von korrekt gefaltetem Hep-25 in hohen Mengen entwickelt. Um das Problem der geringen Löslichkeit von Hep-25 bei neutralem pH-Wert zu überwinden, haben wir einen C-terminalen DEDEDEDE Löslichkeits-Tag eingeführt. Die Metallbindung wurde durch eine Reihe von NMRspektroskopischen Experimenten untersucht, um die Aminosäuren zu identifizieren, welche an der Metallkoordination beteiligt sind. Basierend auf den erhaltenen NMR-Daten wurde eine Strukturberechnung durchgeführt, um eine Modellstruktur des Hep-25-Ni(II)-Komplexes zu erzeugen. Der DEDEDE-Tag wurde aufgrund fehlender NMR- restraints von der Strukturberechnung ausgeschlossen. Die dynamische Natur und der schnelle Austausch eines Teils der Amid-Protonen mit dem Lösungsmittel reduzierten die Gesamtzahl der NMR- restraints, die für eine hochwertige Struktur erforderlich waren. Die NMR-Daten zeigten, dass die 20 C-terminalen Hep-25-Aminosäuren keine signifikanten Konformationsänderungen als Folge eines pH-Wechsels von pH 3 auf pH 7 und einer Metallbindung erfuhren. Ein 3D-Modell des Hep-25-Ni(II)-Komplexes wurde aus den NMR-Daten des Hexapeptid-Ni(II)-Komplexes und des Hep-25-DEDEDE-Ni(II)-Komplexes in Kombination mit der bekannten Konformation der 19 C-terminalen Aminosäuren erstellt. Die NMR-Daten des Hep-25-DEDEDE-Ni(II)Komplexes zeigen, dass sich das Ni-ATCUN-Motiv unabhängig vom C-Terminus bewegt. Die 3D-Modellstruktur des metallgebundenen Hep-25 ermöglicht es, in Zukunft die Interaktion von Hepcidin mit seinem Rezeptor Ferroportin zu untersuchen und soll als Ausgangspunkt für die Entwicklung von Antikörpern mit verbesserter Selektivität dienen. KW - iron KW - hepcidin KW - peptide KW - metal KW - binding KW - NMR KW - Eisen KW - Hepcidin KW - Peptid KW - Metall KW - Bindung KW - NMR Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-459295 ER - TY - THES A1 - Krentz, Konrad-Felix T1 - A Denial-of-Sleep-Resilient Medium Access Control Layer for IEEE 802.15.4 Networks T1 - Eine Denial-of-Sleep-Resiliente Mediumzugriffsschicht für IEEE-802.15.4-Netzwerke N2 - With the emergence of the Internet of things (IoT), plenty of battery-powered and energy-harvesting devices are being deployed to fulfill sensing and actuation tasks in a variety of application areas, such as smart homes, precision agriculture, smart cities, and industrial automation. In this context, a critical issue is that of denial-of-sleep attacks. Such attacks temporarily or permanently deprive battery-powered, energy-harvesting, or otherwise energy-constrained devices of entering energy-saving sleep modes, thereby draining their charge. At the very least, a successful denial-of-sleep attack causes a long outage of the victim device. Moreover, to put battery-powered devices back into operation, their batteries have to be replaced. This is tedious and may even be infeasible, e.g., if a battery-powered device is deployed at an inaccessible location. While the research community came up with numerous defenses against denial-of-sleep attacks, most present-day IoT protocols include no denial-of-sleep defenses at all, presumably due to a lack of awareness and unsolved integration problems. After all, despite there are many denial-of-sleep defenses, effective defenses against certain kinds of denial-of-sleep attacks are yet to be found. The overall contribution of this dissertation is to propose a denial-of-sleep-resilient medium access control (MAC) layer for IoT devices that communicate over IEEE 802.15.4 links. Internally, our MAC layer comprises two main components. The first main component is a denial-of-sleep-resilient protocol for establishing session keys among neighboring IEEE 802.15.4 nodes. The established session keys serve the dual purpose of implementing (i) basic wireless security and (ii) complementary denial-of-sleep defenses that belong to the second main component. The second main component is a denial-of-sleep-resilient MAC protocol. Notably, this MAC protocol not only incorporates novel denial-of-sleep defenses, but also state-of-the-art mechanisms for achieving low energy consumption, high throughput, and high delivery ratios. Altogether, our MAC layer resists, or at least greatly mitigates, all denial-of-sleep attacks against it we are aware of. Furthermore, our MAC layer is self-contained and thus can act as a drop-in replacement for IEEE 802.15.4-compliant MAC layers. In fact, we implemented our MAC layer in the Contiki-NG operating system, where it seamlessly integrates into an existing protocol stack. N2 - Mit dem Aufkommen des Internets der Dinge (IoT), werden immer mehr batteriebetriebene und energieerntende Geräte in diversen Anwendungsbereichen eingesetzt, etwa in der Heimautomatisierung, Präzisionslandwirtschaft, Industrieautomatisierung oder intelligenten Stadt. In diesem Kontext stellen sogenannte Denial-of-Sleep-Angriffe eine immer kritischer werdende Bedrohung dar. Solche Angriffe halten batteriebetriebene, energieerntende oder anderweitig energiebeschränkte Geräte zeitweise oder chronisch ab, in energiesparende Schlafmodi überzugehen. Erfolgreiche Denial-of-Sleep-Angriffe führen zumindest zu einer langen Ausfallzeit der betroffenen Geräte. Um betroffene batteriebetriebene Geräte wieder in Betrieb zu nehmen, müssen zudem deren Batterien gewechselt werden. Dies ist mühsam oder eventuell sogar unmöglich, z.B. wenn solche Geräte an unzugänglichen Orten installiert sind. Obwohl die Forschungsgemeinschaft bereits viele Denial-of-Sleep-Abwehrmechanismen vorgeschlagen hat, besitzen die meisten aktuellen IoT-Protokolle überhaupt keine Denial-of-Sleep-Abwehrmechanismen. Dies kann zum einen daran liegen, dass man des Problems noch nicht gewahr ist, aber zum anderen auch daran, dass viele Integrationsfragen bislang ungeklärt sind. Des Weiteren existieren bisher sowieso noch keine effektiven Abwehrmechanismen gegen bestimmte Denial-of-Sleep-Angriffe. Der Hauptbeitrag dieser Dissertation ist die Entwicklung einer Denial-of-Sleep-resilienten Mediumzugriffsschicht für IoT-Geräte, die via IEEE-802.15.4-Funkverbindungen kommunizieren. Die entwickelte Mediumzugriffsschicht besitzt zwei Hauptkomponenten. Die erste Hauptkomponente ist ein Denial-of-Sleep-resilientes Protokoll zur Etablierung von Sitzungsschlüsseln zwischen benachbarten IEEE-802.15.4-Knoten. Diese Sitzungsschlüssel dienen einerseits der grundlegenden Absicherung des Funkverkehrs und andererseits der Implementierung zusätzlicher Denial-of-Sleep-Abwehrmechanismen in der zweiten Hauptkomponente. Die zweite Hauptkomponente ist ein Denial-of-Sleep-resilientes Mediumzugriffsprotokoll. Bemerkenswert an diesem Mediumzugriffsprotokoll ist, dass es nicht nur neuartige Denial-of-Sleep-Abwehrmechanismen enthält, sondern auch dem Stand der Technik entsprechende Mechanismen zur Verringerung des Energieverbrauchs, zur Steigerung des Durchsatzes sowie zur Erhöhung der Zuverlässigkeit. Zusammenfassend widersteht bzw. mildert unsere Denial-of-Sleep-resiliente Mediumzugriffsschicht alle uns bekannten Denial-of-Sleep-Angriffe, die gegen sie gefahren werden können. Außerdem kann unsere Denial-of-Sleep-resiliente Mediumzugriffsschicht ohne Weiteres an Stelle von IEEE-802.15.4-konformen Mediumzugriffsschichten eingesetzt werden. Dies zeigen wir durch die nahtlose Integration unserer Mediumzugriffsschicht in den Netzwerk-Stack des Betriebssystems Contiki-NG. KW - medium access control KW - denial of sleep KW - internet of things KW - Mediumzugriffskontrolle KW - Schlafentzugsangriffe KW - Internet der Dinge Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-439301 ER - TY - JOUR A1 - Alexiadou, Artemis T1 - A form-function mismatch? BT - The case of Greek deponents JF - Of trees and birds. A Festschrift for Gisbert Fanselow KW - Festschrift KW - Informationsstruktur KW - Linguistik KW - Morphologie KW - Syntax KW - festschrift KW - information structure KW - linguistics KW - morphology KW - syntax Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-432235 SN - 978-3-86956-457-9 SP - 107 EP - 117 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - GEN A1 - Jantzen, Friederike A1 - Wozniak, Natalia Joanna A1 - Kappel, Christian A1 - Sicard, Adrien A1 - Lenhard, Michael T1 - A high‑throughput amplicon‑based method for estimating outcrossing rates T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Background: The outcrossing rate is a key determinant of the population-genetic structure of species and their long-term evolutionary trajectories. However, determining the outcrossing rate using current methods based on PCRgenotyping individual offspring of focal plants for multiple polymorphic markers is laborious and time-consuming. Results: We have developed an amplicon-based, high-throughput enabled method for estimating the outcrossing rate and have applied this to an example of scented versus non-scented Capsella (Shepherd’s Purse) genotypes. Our results show that the method is able to robustly capture differences in outcrossing rates. They also highlight potential biases in the estimates resulting from differential haplotype sharing of the focal plants with the pollen-donor population at individual amplicons. Conclusions: This novel method for estimating outcrossing rates will allow determining this key population-genetic parameter with high-throughput across many genotypes in a population, enabling studies into the genetic determinants of successful pollinator attraction and outcrossing. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 745 KW - Outcrossing KW - Mixed mating KW - Outcrossing rate KW - Capsella KW - Amplicon sequencing Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-435657 SN - 1866-8372 IS - 745 ER - TY - BOOK A1 - Schneider, Sven A1 - Lambers, Leen A1 - Orejas, Fernando T1 - A logic-based incremental approach to graph repair T1 - Ein logikbasierter inkrementeller Ansatz für Graphreparatur N2 - Graph repair, restoring consistency of a graph, plays a prominent role in several areas of computer science and beyond: For example, in model-driven engineering, the abstract syntax of models is usually encoded using graphs. Flexible edit operations temporarily create inconsistent graphs not representing a valid model, thus requiring graph repair. Similarly, in graph databases—managing the storage and manipulation of graph data—updates may cause that a given database does not satisfy some integrity constraints, requiring also graph repair. We present a logic-based incremental approach to graph repair, generating a sound and complete (upon termination) overview of least-changing repairs. In our context, we formalize consistency by so-called graph conditions being equivalent to first-order logic on graphs. We present two kind of repair algorithms: State-based repair restores consistency independent of the graph update history, whereas deltabased (or incremental) repair takes this history explicitly into account. Technically, our algorithms rely on an existing model generation algorithm for graph conditions implemented in AutoGraph. Moreover, the delta-based approach uses the new concept of satisfaction (ST) trees for encoding if and how a graph satisfies a graph condition. We then demonstrate how to manipulate these STs incrementally with respect to a graph update. N2 - Die Reparatur von Graphen, die Wiederherstellung der Konsistenz eines Graphen, spielt in mehreren Bereichen der Informatik und darüber hinaus eine herausragende Rolle: Beispielsweise wird in der modellgetriebenen Konstruktion die abstrakte Syntax von Modellen in der Regel mithilfe von Graphen kodiert. Flexible Bearbeitungsvorgänge erstellen vorübergehend inkonsistente Diagramme, die kein gültiges Modell darstellen, und erfordern daher eine Reparatur des Diagramms. Auf ähnliche Weise können Aktualisierungen in Graphendatenbanken - die das Speichern und Bearbeiten von Graphendaten verwalten - dazu führen, dass eine bestimmte Datenbank einige Integritätsbeschränkungen nicht erfüllt und auch eine Graphreparatur erforderlich macht. Wir präsentieren einen logikbasierten inkrementellen Ansatz für die Graphreparatur, der eine solide und vollständige (nach Beendigung) Übersicht über die am wenigsten verändernden Reparaturen erstellt. In unserem Kontext formalisieren wir die Konsistenz mittels sogenannten Graphbedingungen die der Logik erster Ordnung in Graphen entsprechen. Wir stellen zwei Arten von Reparaturalgorithmen vor: Die zustandsbasierte Reparatur stellt die Konsistenz unabhängig vom Verlauf der Graphänderung wieder her, während die deltabasierte (oder inkrementelle) Reparatur diesen Verlauf explizit berücksichtigt. Technisch stützen sich unsere Algorithmen auf einen vorhandenen Modellgenerierungsalgorithmus für in AutoGraph implementierte Graphbedingungen. Darüber hinaus verwendet der deltabasierte Ansatz das neue Konzept der Erfüllungsbäume (STs) zum Kodieren, ob und wie ein Graph eine Graphbedingung erfüllt. Wir zeigen dann, wie diese STs in Bezug auf eine Graphaktualisierung inkrementell manipuliert werden. T3 - Technische Berichte des Hasso-Plattner-Instituts für Digital Engineering an der Universität Potsdam - 126 KW - nested graph conditions KW - graph repair KW - model repair KW - consistency restoration KW - verschachtelte Graphbedingungen KW - Graphreparatur KW - Modellreparatur KW - Konsistenzrestauration Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-427517 SN - 978-3-86956-462-3 SN - 1613-5652 SN - 2191-1665 IS - 126 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - RPRT A1 - Krieger, Heike A1 - Liese, Andrea Margit T1 - A Metamorphosis of International Law? BT - Value changes in the international legal order from the perspectives of legal and political science T2 - KFG Working Paper Series N2 - The paper aims to lay out a framework for evaluating value shifts in the international legal order for the purposes of a forthcoming book. In view of current contestations it asks whether we are observing yet another period of norm change (Wandel) or even a more fundamental transformation of international law – a metamorphosis (Verwandlung). For this purpose it suggests to look into the mechanisms of how norms change from the perspective of legal and political science and also to approximate a reference point where change turns into metamorphosis. It submits that such a point may be reached where specific legally protected values are indeed changing (change of legal values) or where the very idea of protecting certain values through law is renounced (delegalizing of values). The paper discusses the benefits of such an interdisciplinary exchange and tries to identify differences and commonalities among both disciplinary perspectives. T3 - KFG Working Paper Series - 27 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426088 IS - 27 ER - TY - GEN A1 - Pornsawad, Pornsarp A1 - Sapsakul, Nantawan A1 - Böckmann, Christine T1 - A modified asymptotical regularization of nonlinear ill-posed problems T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - In this paper, we investigate the continuous version of modified iterative Runge–Kutta-type methods for nonlinear inverse ill-posed problems proposed in a previous work. The convergence analysis is proved under the tangential cone condition, a modified discrepancy principle, i.e., the stopping time T is a solution of ∥𝐹(𝑥𝛿(𝑇))−𝑦𝛿∥=𝜏𝛿+ for some 𝛿+>𝛿, and an appropriate source condition. We yield the optimal rate of convergence. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1335 KW - nonlinear operator KW - regularization KW - discrepancy principle KW - asymptotic method KW - optimal rate Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-473433 SN - 1866-8372 IS - 1335 ER - TY - THES A1 - Thiede, Tobias T1 - A multiscale analysis of additively manufactured lattice structures T1 - Multiskalige Analyse von Additiv Gefertigten Gitterstrukturen N2 - Additive Manufacturing (AM) in terms of laser powder-bed fusion (L-PBF) offers new prospects regarding the design of parts and enables therefore the production of lattice structures. These lattice structures shall be implemented in various industrial applications (e.g. gas turbines) for reasons of material savings or cooling channels. However, internal defects, residual stress, and structural deviations from the nominal geometry are unavoidable. In this work, the structural integrity of lattice structures manufactured by means of L-PBF was non-destructively investigated on a multiscale approach. A workflow for quantitative 3D powder analysis in terms of particle size, particle shape, particle porosity, inter-particle distance and packing density was established. Synchrotron computed tomography (CT) was used to correlate the packing density with the particle size and particle shape. It was also observed that at least about 50% of the powder porosity was released during production of the struts. Struts are the component of lattice structures and were investigated by means of laboratory CT. The focus was on the influence of the build angle on part porosity and surface quality. The surface topography analysis was advanced by the quantitative characterisation of re-entrant surface features. This characterisation was compared with conventional surface parameters showing their complementary information, but also the need for AM specific surface parameters. The mechanical behaviour of the lattice structure was investigated with in-situ CT under compression and successive digital volume correlation (DVC). The deformation was found to be knot-dominated, and therefore the lattice folds unit cell layer wise. The residual stress was determined experimentally for the first time in such lattice structures. Neutron diffraction was used for the non-destructive 3D stress investigation. The principal stress directions and values were determined in dependence of the number of measured directions. While a significant uni-axial stress state was found in the strut, a more hydrostatic stress state was found in the knot. In both cases, strut and knot, seven directions were at least needed to find reliable principal stress directions. N2 - Das Laserstrahlschmelzen (L-PBF) als Prozess im Bereich der Additiven Fertigung (AM) ermöglicht ein neuartiges Bauteildesign und somit auch die Produktion von komplexen Gitterstrukturen, welche Materialeinsparungen und effizientere Kühlsysteme erlauben und daher für verschiedene industrielle Anwendungen (z.B. Gasturbinen) geeignet sind. Interne Defekte, Eigenspannungen und geometrische Abweichungen von der Soll-Geometrie sind jedoch unvermeidbar. Im Rahmen dieser Arbeit wird die strukturelle Integrität von L-PBF gefertigten Gitterstrukturen zerstörungsfrei auf verschiedenen Größenskalen untersucht. Eine Auswerteroutine für dreidimensionale quantitative Pulvercharakterisierung hinsichtlich der Partikelgröße, der -form, der -porosität, des Interpartikelabstands und der Packungsdichte wurde entwickelt. Synchrotron Computertomographie (CT) wurde für die Korrelation der Packungsdichte mit der Partikelgröße und -form genutzt. Darüber hinaus konnte festgestellt werden, dass mindestens 50% der Porosität aus den Pulverpartikel während der Herstellung der Streben mittels L-PBF gelöst wurde. Streben sind die Grundbausteine der Gitterstrukturen und wurden mit industrieller CT untersucht. Dabei lag der Fokus auf dem Einfluss des Bauwinkels auf die Strebenporosität und -oberflächenqualität. Die Analyse der Oberflächentopographie wurde hinsichtlich einer quantitativen Analyse von sogenannten re-entrant features erweitert. Der Vergleich dieser Auswertung mit konventionellen Oberflächenparametern offenbarte sowohl deren Komplementarität also auch den Bedarf an neuen AM-spezifischen Oberflächenparametern. In-situ CT Versuche mit anschließender digitaler Volumenkorrelation (DVC) erlaubte die Gitterstruktur bezüglich des mechanischen Verhaltens unter Druckspannung zu bewerten. Aufgrund einer schichtweisen Faltung der Einheitszellen konnte dabei das Versagensverhalten als knoten-dominiert identifiziert werden. Mittels Neutronenbeugung konnten Eigenspannungen in solchen Gitterstrukturen erstmalig experimentell bestimmt werden. Dabei wurden sowohl die Hauptspannungsrichtungen als auch die -beträge in Abhängigkeit von der Anzahl der gemessenen Spannungsrichtungen bestimmt. Während in der Strebe ein signifikanter uni-axialer Spannungszustand nachgewiesen wurde, zeigte der Knotenpunkt einen hydrostatischeren Spannungszustand. Sowohl im Falle der Strebe als auch des Knotenpunkts waren mindestens sieben gemessene Spannungsrichtungen nötig, um die Hauptspannungsrichtungen verlässlich zu ermitteln. KW - additive manufacturing KW - laser powder bed fusion KW - computed tomography KW - neutron diffraction KW - in-situ testing KW - residual stress KW - roughness KW - powder particle analysis KW - additive Fertigung KW - Laserstrahlschmelzen KW - Computertomographie KW - Neutronendiffraktion KW - In-situ Experimente KW - Eigenspannung KW - Rauheit KW - Pulverpartikelanalyse Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-470418 ER - TY - GEN A1 - Sagu Tchewonpi, Sorel A1 - Huschek, Gerd A1 - Bönick, Josephine A1 - Homann, Thomas A1 - Rawel, Harshadrai Manilal T1 - A New Approach of Extraction of α-Amylase/trypsin Inhibitors from Wheat (Triticum aestivum L.), Based on Optimization Using Plackett–Burman and Box–Behnken Designs T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Wheat is one of the most consumed foods in the world and unfortunately causes allergic reactions which have important health effects. The α-amylase/trypsin inhibitors (ATIs) have been identified as potentially allergen components of wheat. Due to a lack of data on optimization of ATI extraction, a new wheat ATIs extraction approach combining solvent extraction and selective precipitation is proposed in this work. Two types of wheat cultivars (Triticum aestivum L.), Julius and Ponticus were used and parameters such as solvent type, extraction time, temperature, stirring speed, salt type, salt concentration, buffer pH and centrifugation speed were analyzed using the Plackett-Burman design. Salt concentration, extraction time and pH appeared to have significant effects on the recovery of ATIs (p < 0.01). In both wheat cultivars, Julius and Ponticus, ammonium sulfate substantially reduced protein concentration and inhibition of amylase activity (IAA) compared to sodium chloride. The optimal conditions with desirability levels of 0.94 and 0.91 according to the Doehlert design were: salt concentrations of 1.67 and 1.22 M, extraction times of 53 and 118 min, and pHs of 7.1 and 7.9 for Julius and Ponticus, respectively. The corresponding responses were: protein concentrations of 0.31 and 0.35 mg and IAAs of 91.6 and 83.3%. Electrophoresis and MALDI-TOF/MS analysis showed that the extracted ATIs masses were between 10 and 20 kDa. Based on the initial LC-MS/MS analysis, up to 10 individual ATIs were identified in the extracted proteins under the optimal conditions. The positive implication of the present study lies in the quick assessment of their content in different varieties especially while considering their allergenic potential. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 805 KW - wheat KW - α-amylase/trypsin inhibitors KW - extraction KW - Plackett–Burman design KW - Doehlert design KW - SDS-PAGE KW - MALDI-TOF/MS KW - LC-MS/MS Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-442229 SN - 1866-8372 IS - 805 ER -