TY - JOUR A1 - Ullrich, André A1 - Teichmann, Malte A1 - Gronau, Norbert T1 - Fast trainable capabilities in software engineering-skill development in learning factories JF - Ji suan ji jiao yu = Computer Education / Qing hua da xue N2 - The increasing demand for software engineers cannot completely be fulfilled by university education and conventional training approaches due to limited capacities. Accordingly, an alternative approach is necessary where potential software engineers are being educated in software engineering skills using new methods. We suggest micro tasks combined with theoretical lessons to overcome existing skill deficits and acquire fast trainable capabilities. This paper addresses the gap between demand and supply of software engineers by introducing an actionoriented and scenario-based didactical approach, which enables non-computer scientists to code. Therein, the learning content is provided in small tasks and embedded in learning factory scenarios. Therefore, different requirements for software engineers from the market side and from an academic viewpoint are analyzed and synthesized into an integrated, yet condensed skills catalogue. This enables the development of training and education units that focus on the most important skills demanded on the market. To achieve this objective, individual learning scenarios are developed. Of course, proper basic skills in coding cannot be learned over night but software programming is also no sorcery. KW - learning factory KW - programming skills KW - software engineering KW - training Y1 - 2021 U6 - https://doi.org/10.16512/j.cnki.jsjjy.2020.12.002 SN - 1672-5913 IS - 12 SP - 2 EP - 10 PB - [Verlag nicht ermittelbar] CY - Bei jing shi ER - TY - JOUR A1 - Teichmann, Malte A1 - Vladova, Gergana A1 - Gronau, Norbert T1 - Conception of subject-oriented learning BT - ameso-didactic design framework for learning scenarios for manufacturing JF - SSRN eLibrary / Social Science Research Network N2 - Competence development must change at all didactic levels to meet the new requirements triggered by digitization. Unlike classic learning theories and the resulting popular approaches (e.g., sender-receiver model), future-oriented vocational training must include new learning theory impulses in the discussion about competence acquisition. On the one hand, these impulses are often very well elaborated on the theoretical side, but the transfer into innovative learning environments - such as learning factories - is often still missing. On the other hand, actual learning factory (design) approaches often concentrate primarily on the technical side. Subject-oriented learning theory enables the design of competence development-oriented vocational training projectsin learning factories in which persons can obtain relevant competencies for digitization. At the same time, such learning theory approaches assume a potentially infinite number of learning interests and reasons. Following this, competence development is always located in an institutional or organizational context. The paper conceptionally answers how this theoryimmanent challenge is synthesizable with the reality of organizationally competence development requirements. KW - subject-oriented learning KW - learning scenario for manufacturing KW - didactic framework KW - action problems KW - didactic concept Y1 - 2023 U6 - https://doi.org/10.2139/ssrn.4457995 SN - 1556-5068 PB - Social Science Electronic Publ. CY - [Erscheinungsort nicht ermittelbar] ER - TY - JOUR A1 - Gronau, Norbert A1 - Teichmann, Malte T1 - ERP-Auswahl für ein Professional Services Unternehmen JF - ERP-Management : Auswahl, Einführung und Betrieb von ERP-Systemen N2 - Die Branche der Dienstleistungsunternehmen (Professional Services) hat einige Anforderungen, die sie von den „klassischen“ ERP-Branchen Industrie und Handel unterscheidet. Dieser Beitrag beschreibt einige der aktuellen Herausforderungen dieses immer wichtiger werdenden Wirtschaftszweigs und geht dann am Beispiel eines mittelständischen Ingenieurdienstleisters auf typische Anforderungen dieser Branche, infrage kommende Systeme und das Vorgehen zur Auswahl ein. KW - ERP-Systeme KW - ERP-Auswahl KW - Auswahlvorgehen KW - Professional Services Unternehmen Y1 - 2020 U6 - https://doi.org/10.30844/ERP_20-2_31-35 SN - 1860-6725 VL - 16 IS - 2 SP - 31 EP - 35 PB - Gito mbh Verlag für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Knost, Dennis A1 - Gronau, Norbert T1 - Serious games in learning factories BT - perpetuating knowledge in learning loops by game-based learning JF - Procedia manufacturing N2 - The usage of gamification in the contexts of commerce, consumption, innovation or eLearning in schools and universities has been extensively researched. However, the potentials of serious games to transfer and perpetuate knowledge and action patterns in learning factories have not been levered so far. The goal of this paper is to introduce a serious game as an instrument for knowledge transfer and perpetuation. Therefore, reqirements towards serious games in the context of learning factories are pointed out. As a result, that builds on these requirements, a serious learning game for the topic of Industry 4.0 is practically designed and evaluated. KW - game-based learning KW - gamification KW - serious game KW - learning factories Y1 - 2020 U6 - https://doi.org/10.1016/j.promfg.2020.04.104 SN - 2351-9789 VL - 45 SP - 259 EP - 264 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Wenz, Julian A1 - Gronau, Norbert T1 - Herausforderungen und Handlungsempfehlungen betrieblicher Weiterbildungspraxis in Zeiten der Digitalisierung T1 - Challenges and recommended actions for in-company vocational training in times of digitization JF - HMD Praxis der Wirtschaftsinformatik N2 - Die Digitalisierung von Produktionsprozessen schreitet mit einer hohen Intensität voran. Weiterbildung hat eine hohe Relevanz für betriebliche Transformationsprozesse. Die betriebliche Weiterbildungspraxis ist den aktuellen Herausforderungen der Digitalisierung jedoch nicht gewachsen. Herausforderungen sind Kompetenzlücken der Mitarbeiter, ungewisse Anforderungsprofile und Tätigkeitstypen, demographischer Wandel sowie veraltete didaktische Ansätze. Zudem wird bestehender inhaltlicher und pädagogischer Freiraum bei der Gestaltung von Weiterbildung oftmals nur unzureichend ausgenutzt. Die skizzierte Situation führt dazu, dass der Mehrwert gegenwärtiger Qualifizierungsangebote sowohl für Unternehmen als auch Beschäftigte nicht ausgeschöpft wird. Ausgehend von Veränderungen durch Digitalisierung in der Produktion und deren Auswirkungen auf die Kompetenzentwicklung diskutiert dieser Beitrag Herausforderungen gegenwärtiger betrieblicher Weiterbildung. Er leitet Handlungsempfehlungen ab, die mithilfe von Beispielen gewerkschaftlich unterstützter Weiterbildungspraxis illustriert werden. Im Ergebnis erhalten Interessierte einen Überblick über gegenwärtige Herausforderungen und Handlungsempfehlungen für die Gestaltung und Durchführung von Weiterbildung in Zeiten der Digitalisierung. N2 - The digital transformation of production processes is constantly progressing. The human workforce is a central success factor, but employees must be prepared for the requirements induced by change, using inter alia competence development. In reality, however, the content-related and pedagogical freedom to design vocational training is often inadequately addressed. Based on the changes trough digitization in production processes, the challenges of current continuing vocational training in enterprises are discussed. Recommendations for action are then derived and illustrated by examples. The recommendations for action can serve as a basis for the design and implementation of their further vocational training practice. KW - betriebliche Weiterbildungspraxis KW - Digitalisierung von Produktionsprozessen KW - gewerkschaftlich unterstützte Weiterbildungspraxis KW - Kompetenzentwicklung KW - vocational training KW - digitization of production processes KW - labour union education KW - competence development Y1 - 2020 U6 - https://doi.org/10.1365/s40702-020-00614-x SN - 1436-3011 SN - 2198-2775 VL - 57 SP - 512 EP - 527 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Teichmann, Malte A1 - Ullrich, André A1 - Kotarski, David A1 - Gronau, Norbert T1 - Facing the demographic change BT - recommendations for designing learning factories as age-appropriate teaching-learning environments for older blue-collar workers JF - SSRN eLibrary / Social Science Research Network N2 - Digitization and demographic change are enormous challenges for companies. Learning factories as innovative learning places can help prepare older employees for the digital change but must be designed and configured based on their specific learning requirements. To date, however, there are no particular recommendations to ensure effective age-appropriate training of bluecollar workers in learning factories. Therefore, based on a literature review, design characteristics and attributes of learning factories and learning requirements of older employees are presented. Furthermore, didactical recommendations for realizing age-appropriate learning designs in learning factories and a conceptualized scenario are outlined by synthesizing the findings. KW - learning factory KW - vocational training KW - learning environment KW - age-appropriate competence development KW - demographic change Y1 - 2021 U6 - https://doi.org/10.2139/ssrn.3858716 SN - 1556-5068 PB - Social Science Electronic Publ. CY - [Erscheinungsort nicht ermittelbar] ER - TY - JOUR A1 - Vladova, Gergana A1 - Heuts, Alexander A1 - Teichmann, Malte T1 - Dem Mitarbeiter zu Diensten T1 - At the Service of the Employee BT - Weiterbildung und Qualifizierung als Personennahe Dienstleistung BT - Further Training and Qualification as a Personal Service JF - HMD : Praxis der Wirtschaftsinformatik N2 - Die Weiterbildung und Qualifizierung der Mitarbeiter sind zentrale Erfolgsfaktoren des digitalen Wandels. Die zentrale Herausforderung besteht darin, diese maßgeschnitten anzubieten sowie notwendige Akzeptanz nicht vorauszusetzen, sondern ebenso als Zielgröße anzusehen. Dies geschieht jedoch nur, wenn die Mitarbeiter als Partner gesehen werden, deren Bedürfnisse und Verständnis nachhaltig berücksichtigt werden. Dieser Beitrag schlägt vor diesem Hintergrund einen Ansatz vor, Weiterbildung als Personennahe Dienstleistung zu realisieren. Dafür wird zuerst ein skizzenhafter Überblick über grundlegende Kompetenzanforderungen des digitalen Wandels gegeben. Danach wird die aktuelle Situation betrieblicher Weiterbildung in der digitalen Transformation beleuchtet. Hierzu wurde in einem Zeitraum von sechs Monaten im Rahmen einer quantitativen Untersuchung erhoben, wie Beschäftigte die digitale Transformation ihres Unternehmens und daraus resultierende Bedarfe betrieblicher Weiterbildung wahrnehmen. Darauf basierend werden drei aktuelle Paradoxe abgeleitet, die mit einer Durchführung von Weiterbildung als Personennahe Dienstleistung verhindert werden können. Empfehlungen und Lösungsansätze werden hierzu diskutiert und weiterer Forschungsbedarf abgeleitet. N2 - The further training and qualification of employees are central success factors of digital change. The central challenge is to offer these customized services and not to presuppose acceptance, but rather to regard it as a target value. However, this will only happen if the employees are seen as partners and their needs and understanding are taken into account in the long term. Against this background, this article proposes an approach to realize further education as a personal service. For this purpose, a brief outline of the basic competence requirements of digital change is given first. Afterwards, the current situation of in-company continuing training in the digital transformation will be examined. A quantitative survey was conducted over a period of six months to determine how employees perceive the digital transformation of their company and the resulting needs for continuing vocational training. Based on this, three current paradoxes are derived, which can be prevented by conducting continuing education as personal service. Recommendations and solutions will be discussed and further research is needed. KW - Digitale Transformation KW - Kompetenzentwicklung KW - Weiterbildung KW - Industrie 4.0 KW - Personalisierung KW - Personennahe Dienstleistungen KW - Digital transformation KW - Competence development KW - Further education KW - Industry 4.0 KW - Personalization KW - Personal service Y1 - 2021 U6 - https://doi.org/doi.org/10.1365/s40702-020-00626-7 SN - 1436-3011 SN - 2198-2775 IS - 57 SP - 710 EP - 721 PB - Springer CY - Wiesbaden ER - TY - JOUR A1 - Bender, Benedict A1 - Teichmann, Malte A1 - Ullrich, Andre T1 - Mobile IIoT-Technologien als Erfolgsfaktor für Fertigung und Lernszenarien JF - Industrial Internet of Things in der Arbeits- und Betriebsorganisation Y1 - 2017 SN - 978-3-95545-225-4 SP - 235 EP - 257 PB - Gito CY - Berlin ER -