TY - JOUR A1 - Fudickar, Werner A1 - Linker, Torsten T1 - Why triple bonds protect acenes from oxidation and decomposition JF - Journal of the American Chemical Society N2 - An experimental and computational study on the impact of functional groups on the oxidation stability of higher acenes is presented. We synthesized anthracenes, tetracenes, and pentacenes with various substituents at the periphery, identified their photooxygenation products, and measured the kinetics. Furthermore, the products obtained from thermolysis and the kinetics of the thermolysis are investigated. Density functional theory is applied in order to predict reaction energies, frontier molecular orbital interactions, and radical stabilization energies. The combined results allow us to describe the mechanisms of the oxidations and the subsequent thermolysis. We found that the alkynyl group not only enhances the oxidation stability of acenes but also protects the resulting endoperoxides from thermal decomposition. Additionally, such substituents increase the regioselectivity of the photooxygenation of tetracenes and pentacenes. For the first time, we oxidized alkynylpentacenes by using chemically generated singlet oxygen (O-1(2)) without irradiation and identified a 6,13-endoperoxide as the sole regioisomer. The bimolecular rate constant of this oxidation amounts to only 1 X 10(5) s(-1) M-1. This unexpectedly slow reaction is a result of a physical deactivation of O-1(2). In contrast to unsubstituted or aryl-substituted acenes, photooxygenation of alkynyl-substituted acenes proceeds most likely by a concerted mechanism, while the thermolysis is well explained by the formation of radical intermediates. Our results should be important for the future design of oxidation stable acene-based semiconductors. Y1 - 2012 U6 - https://doi.org/10.1021/ja306056x SN - 0002-7863 VL - 134 IS - 36 SP - 15071 EP - 15082 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Weiss, Jan A1 - Li, Ang A1 - Wischerhoff, Erik A1 - Laschewsky, André T1 - Water-soluble random and alternating copolymers of styrene monomers with adjustable lower critical solution temperature JF - Polymer Chemistry N2 - Random copolymers of 4-vinylbenzyl tri(oxyethylene) and tetra(oxyethylene) ethers, as well as alternating copolymers of 4-vinylbenzyl methoxytetra(oxyethylene) ether and a series of N-substituted maleimides, were synthesised by conventional free radical polymerisation, reversible addition fragmentation chain transfer (RAFT) and atom transfer radical polymerisation (ATRP). Their thermosensitive behaviour in aqueous solution was studied by turbidimetry and dynamic light scattering. Depending on the copolymer composition, a LCST type phase transition was observed in water. The transition temperature of the obtained random as well as alternating copolymers could be varied within a broad temperature window. In the case of the random copolymers, transition temperatures could be easily fine-tuned, as they showed a linear dependence on the copolymer composition, and were additionally modified by the nature of the polymer end-groups. Alternating copolymers were extremely versatile for implementing a broad range of variations of the phase transition temperatures. Further, while alternating copolymers derived from 4-vinylbenzyl methoxytetra(oxyethylene) ether and maleimides with small hydrophobic side chains underwent macroscopic phase separation when dissolved in water and heated above their cloud point, the incorporation of maleimides bearing larger hydrophobic substituents resulted in the formation of mesoglobules above the phase transition temperature, with hydrodynamic diameters of less than 100 nm. Y1 - 2012 U6 - https://doi.org/10.1039/c1py00422k SN - 1759-9954 VL - 3 IS - 2 SP - 352 EP - 361 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Bomm, Jana T1 - Von Gold Plasmonen und Exzitonen : Synthese, Charakterisierung und Applikationen von Gold Nanopartikeln T1 - Of gold plasmons and excitons : synthesis, characterization and applications of gold nanoparticles N2 - In dieser Arbeit wurden sphärische Gold Nanopartikel (NP) mit einem Durchmesser größer ~ 2 nm, Gold Quantenpunkte (QDs) mit einem Durchmesser kleiner ~ 2 nm sowie Gold Nanostäbchen (NRs) unterschiedlicher Länge hergestellt und optisch charakterisiert. Zudem wurden zwei neue Synthesevarianten für die Herstellung thermosensitiver Gold QDs entwickelt werden. Sphärische Gold NP zeigen eine Plasmonenbande bei ~ 520 nm, die auf die kollektive Oszillation von Elektronen zurückzuführen ist. Gold NRs weisen aufgrund ihrer anisotropen Form zwei Plasmonenbanden auf, eine transversale Plasmonenbande bei ~ 520 nm und eine longitudinale Plasmonenbande, die vom Länge-zu-Durchmesser-Verhältnis der Gold NRs abhängig ist. Gold QDs besitzen keine Plasmonenbande, da ihre Elektronen Quantenbeschränkungen unterliegen. Gold QDs zeigen jedoch aufgrund diskreter Energieniveaus und einer Bandlücke Photolumineszenz (PL). Die synthetisierten Gold QDs besitzen eine Breitbandlumineszenz im Bereich von ~ 500-800 nm, wobei die Lumineszenz-eigenschaften (Emissionspeak, Quantenausbeute, Lebenszeiten) stark von den Herstellungs-bedingungen und den Oberflächenliganden abhängen. Die PL in Gold QDs ist ein sehr komplexes Phänomen und rührt vermutlich von Singulett- und Triplett-Zuständen her. Gold NRs und Gold QDs konnten in verschiedene Polymere wie bspw. Cellulosetriacetat eingearbeitet werden. Polymernanokomposite mit Gold NRs wurden erstmals unter definierten Bedingungen mechanisch gezogen, um Filme mit optisch anisotropen (richtungsabhängigen) Eigenschaften zu erhalten. Zudem wurde das Temperaturverhalten von Gold NRs und Gold QDs untersucht. Es konnte gezeigt werden, dass eine lokale Variation der Größe und Form von Gold NRs in Polymernanokompositen durch Temperaturerhöhung auf 225-250 °C erzielt werden kann. Es zeigte sich, dass die PL der Gold QDs stark temperaturabhängig ist, wodurch die PL QY der Proben beim Abkühlen (-7 °C) auf knapp 30 % verdoppelt und beim Erhitzen auf 70 °C nahezu vollständig gelöscht werden konnte. Es konnte demonstriert werden, dass die Länge der Alkylkette des Oberflächenliganden einen Einfluss auf die Temperaturstabilität der Gold QDs hat. Zudem wurden verschiedene neuartige und optisch anisotrope Sicherheitslabels mit Gold NRs sowie thermosensitive Sicherheitslabel mit Gold QDs entwickelt. Ebenso scheinen Gold NRs und QDs für die und die Optoelektronik (bspw. Datenspeicherung) und die Medizin (bspw. Krebsdiagnostik bzw. -therapie) von großem Interesse zu sein. N2 - In this thesis, the synthesis and optical characterization of spherical gold nanoparticles (NP) with diameters larger than ~ 2 nm, gold quantum dots (QDs) with diameters smaller than ~ 2 nm and gold nanorods (NRs) with different lengths are presented. In addition, a novel one-pot synthesis for the preparation of thermosensitive gold QDs is introduced. Gold NP solutions appear red colored due to their strong absorption in the visible range at ~ 520 nm. This absorption band is a result of surface plasmon resonance, which is caused by the coherent oscillation of conduction band electrons induced by an electromagnetic field. In contrast to spherical gold NPs, gold NRs show two surface plasmon bands due to their anisotropic shape, a transverse plasmon band at ~ 520 nm and a longitudinal plasmon band depending on the aspect ratio (length-to-width-ratio) of the gold NRs. If the size of the gold NPs decreases to values below ~ 2 nm, quantum-size confinement occurs and the surface plasmon band disappears. Additionally, the overlap between conduction band and valence band disappears, discrete electronic levels arise and a band gap is created. As a consequence of quantum confinement, the gold QDs show photoluminescence (PL) upon UV-irradiation. The gold QDs synthesized via the one-pot synthesis exhibit a broadband luminescence between 500 nm and 800 nm. The luminescence properties (emission peak, quantum yield, lifetime) strongly depend on the synthetic parameters like reaction temperature, stoichiometry and the surface ligand. Gold NRs and gold QDs were incoroporated into different polymers (e.g. cellulose triacetate). Polymer nanocomposite films showing optical anisotropy are obtainded by stretching polymer films containing gold NRs uniaxial in a tensile test machine. In addition to the optical characterization of gold NRs and QDs, their thermal behavior in solution as well as in different nanocomposites is studied. A shortening of the gold NRs or a transformation into spherical gold NP is observed, if the polymer nanocomposites containing gold NRs are heated above a temperature of 200 °C. The PL of the synthesized gold QDs strongly depends on the ambient temperature. An increase of PL quantum yield (QY) and PL lifetime occur, if the solutions are cooled. The best PL QY of 16.6 % was observed for octadecyl mercaptan capped gold QDs at room temperature, which could be improved to 28.6 % when cooling the solutions to -7 °C. Furthermore, optically anisotropic security labels containing gold NRs and thermosensitive security devices containing gold QDs are developed. Due to their unique optical properties, gold NRs and QDs are interesting candidates for optoelectronical as well as data storage devices and medical applications like biomedical imaging or cancer therapy. KW - Gold KW - Nanopartikel KW - Quantenpunkte KW - Nanostäbchen KW - Oberflächenplasmonenlasmonen KW - gold KW - nanoparticles KW - quantum dots KW - nanorods KW - surface plasmons Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66402 ER - TY - THES A1 - Rojas Carillo, Oscar Mario T1 - Versatile uses of halogen-free Ionic Liquids for the formulation of non-aqueous microemulsion and synthesis of gold nanoparticles Y1 - 2012 CY - Potsdam ER - TY - JOUR A1 - Kienzler, Andrea Altevogt Nee A1 - Flehr, Roman A1 - Gehne, Sören A1 - Kumke, Michael Uwe A1 - Bannwarth, Willi T1 - Verification and biophysical characterization of a New Three-Color Forster Resonance-Energy-Transfer (FRET) System in DNA JF - Helvetica chimica acta N2 - We report on a new three-color FRET system consisting of three fluorescent dyes, i.e., of a carbostyril (=quinolin-2(1H)-one)-derived donor D, a (bathophenanthroline)ruthenium complex as a relay chromophore A1, and a Cy dye as A2 (FRET=Forster resonance-energy-transfer) (cf. Fig. 1). With their widely matching spectroscopic properties (cf. Fig. 2), the combination of these dyes yielded excellent FRET efficiencies. Furthermore, fluorescence lifetime measurements revealed that the long fluorescence lifetime of the Ru complex was transferred to the Cy dye offering the possibility to measure the whole system in a time-resolved mode. The FRET system was established on double-stranded DNA (cf. Fig. 3) but it should also be generally applicable to other biomolecules. KW - Forster resonance energy transfer (FRET) system KW - DNA KW - Fluorescence KW - Ruthenium complexes Y1 - 2012 U6 - https://doi.org/10.1002/hlca.201100460 SN - 0018-019X VL - 95 IS - 4 SP - 543 EP - 555 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Kirpichenko, Svetlana V. A1 - Shainyan, Bagrat A. A1 - Kleinpeter, Erich T1 - Unusual conformational preferences of 1,3-dimethyl-3-isopropoxy-3-silapiperidine JF - Journal of physical organic chemistry N2 - The conformational analysis of the first representative of the Si-alkoxy substituted six-membered Si,N-heterocycles, 1,3-dimethyl-3-isopropoxy-3-silapiperidine, was performed by low-temperature 1H and 13C NMR spectroscopy and DFT theoretical calculations. In contrast to the expectations from the conformational energies of methyl and alkoxy substituents, the Meaxi-PrOeq conformer was found to predominate in the conformational equilibrium in the ratio Meaxi-PrOeq : Meeqi-PrOax of ca. 2 : 1 as from the 1H and 13C NMR study. The thermodynamic parameters obtained by the complete line shape analysis showed that the main contribution to the barrier to ring inversion originates from the entropy term of the free energy of activation. KW - barrier to ring inversion KW - conformational equilibrium KW - DFT theoretical calculations KW - dynamic NMR KW - silapiperidines Y1 - 2012 U6 - https://doi.org/10.1002/poc.3028 SN - 0894-3230 VL - 25 IS - 12 SP - 1321 EP - 1327 PB - Wiley-Blackwell CY - Hoboken ER - TY - THES A1 - Traeger, Juliane T1 - Ungesättigte Dithioetherliganden : selektive Extraktionsmittel für die Gewinnung von Palladium(II) aus Sekundärrohstoffen T1 - Unsaturated dithioether ligands : selective extractants for the recovery of Palladium(II) from secondary sources N2 - Die Entwicklung neuer Verfahren für die Rückführung von Palladium aus Altmaterialien, wie gebrauchten Autoabgaskatalysatoren, in den Stoffstromkreislauf ist sowohl aus ökologischer als auch ökonomischer Sicht erstrebenswert. In dieser Arbeit wurden neue Flüssig-Flüssig- und Fest-Flüssig-Extraktionsmittel entwickelt, mit denen Palladium(II) aus einer oxidierenden, salzsauren Laugungslösung, die neben Palladium auch Platin und Rhodium sowie zahlreiche unedle Metalle enthält, zurückgewonnen werden kann. Die neuen Extraktionsmittel ungesättigte monomere 1,2-Dithioether und oligomere Ligandenmischungen mit vicinalen Dithioether-Einheiten – sind im Gegensatz zu vielen in der Literatur aufgeführten Extraktionsmitteln hochselektiv. Aufgrund ihrer geometrischen und elektronischen Präorganisation bilden sie mit Palladium(II) stabile quadratisch-planare Chelatkomplexe. Für die Entwicklung des Flüssig-Flüssig-Extraktionsmittels wurde eine Reihe von ungesättigten 1,2-Dithioetherliganden dargestellt, welche auf einer starren 1,2-Dithioethen-Einheit, die in ein variierendes elektronenziehendes Grundgerüst eingebettet ist, basieren und polare Seitenketten besitzen. Neben der Bestimmung der Kristallstrukturen der Liganden und ihrer Palladiumdichlorid-Komplexe wurden die elektro- und photochemischen Eigenschaften, die Komplexstabilität und das Verhalten in Lösung untersucht. In Flüssig-Flüssig-Extraktionsuntersuchungen konnte gezeigt werden, dass einige der neuen Liganden industriell genutzten Extraktionsmitteln durch eine schnellere Einstellung des Extraktionsgleichgewichts überlegen sind. Anhand von Kriterien, die für eine industrielle Nutzbarkeit entscheidend sind, wie: guter Oxidationsbeständigkeit, einer hohen Extraktionsausbeute (auch bei hohen Salzsäurekonzentrationen der Speiselösung), schneller Extraktionskinetik und einer hohen Selektivität für Palladium(II) wurde aus der Reihe der sechs Liganden ein geeignetes Flüssig-Flüssig-Extraktionsmittel ausgewählt: 1,2-Bis(2-methoxyethylthio)benzen. Mit diesem wurde ein praxisnahes Flüssig-Flüssig-Extraktionssystem entwickelt. Nach der schrittweisen Adaption der wässrigen Phase von einer Modelllösung hin zu der oxidierenden, salzsauren Laugungslösung erfolgte die Auswahl eines geeigneten großtechnisch, einsetzbaren Lösemittels (1,2-Dichlorbenzen) und eines effizienten Reextraktionsmittels (0,5 M Thioharnstoff in 0,1 M HCl). Die hohe Palladium(II)-Selektivität dieses Flüssig-Flüssig-Extraktionssystems konnte verifiziert und seine Wiederverwendbarkeit und Praxistauglichkeit unter Beweis gestellt werden. Weiterhin wurde gezeigt, dass sich beim Kontakt mit oxidierenden Medien aus dem Dithioether 1,2-Bis(2-methoxyethylthio)benzen geringe Mengen des Thioethersulfoxids 1-(2-Methoxyethylsulfinyl)-2-(2-methoxyethylthio)benzen bilden. Dieses wird im sauren Milieu protoniert und beschleunigt die Extraktion wie ein Phasentransferkatalysator, ohne jedoch die Palladium(II)-Selektivität herabzusetzen. Die Kristallstruktur des Palladiumdichlorid-Komplexes des Tioethersulfoxids zeigt, dass der unprotonierte Ligand Palladium(II), analog zum Dithioether, über die chelatisierenden Schwefelatome koordiniert. Verschiedene Mischungen von Oligo(dithioether)-Liganden und der monomere Ligand 1,2-Bis(2-methoxyethylthio)benzen dienten als Extraktionsmittel für Fest-Flüssig-Extraktionsversuche mit SIRs (solvent impregnated resins) und wurden zu diesem Zweck auf hydrophilem Kieselgel und organophilem Amberlite® XAD 2 adsorbiert. Die Oligo(dithioether)-Liganden basieren auf 1,2-Dithiobenzen oder 1,2-Dithiomaleonitril-Einheiten, welche über Tris(oxyethylen)ethylen- oder Trimethylen-Brücken miteinander verknüpft sind. Mit Hilfe von Batch-Versuchen konnte gezeigt werden, dass sich strukturelle Unterschiede - wie die Art der chelatisierenden Einheit, die Art der verbrückenden Ketten und das Trägermaterial - auf die Extraktionsausbeuten, die Extraktionskinetik und die Beladungskapazität auswirken. Die kieselgelhaltigen SIRs stellen das Extraktionsgleichgewicht viel schneller ein als die Amberlite® XAD 2-haltigen. Jedoch bleiben die Extraktionsmittel auf Amberlite® XAD 2, im Gegensatz zu Kieselgel, dauerhaft haften. Im salzsauren Milieu sind die 1,2-Dithiobenzen-derivate besser als Extraktionsmittel geeignet als die 1,2-Dithiomaleonitrilderivate. In Säulenversuchen mit der oxidierenden, salzsauren Laugungslösung und wiederverwendbaren, mit 1,2-Dithiobenzenderivaten imprägnierten, Amberlite® XAD 2-haltigen SIRs zeigte sich, dass für die Realisierung hoher Beladungskapazitäten sehr geringe Pumpraten benötigt werden. Trotzdem konnte die gute Palladium(II)-Selektivität dieser Festphasenmaterialien demonstriert werden. Allerdings wurden in den Eluaten im Gegensatz zu den Eluaten, die aus Flüssig-Flüssig-Extraktion resultierten neben dem Palladium auch geringe Mengen an Platin, Aluminium, Eisen und Blei gefunden. N2 - The development of new processes for the recovery of palladium from recycling materials like spent automotive catalysts is of economic and ecologic interest. In this thesis new solvent and solid phase extractants have been designed, which are suitable for the recovery of palladium(II) from an oxidising hydrochloric leach liquor that does not only additionally contain platinum and rhodium but also a number of base metals. In contrast to many extractants described in the literature these new extractants – unsaturated monomeric dithioethers as well as oligomeric mixtures of ligands with vicinal dithioether units – are highly selective for palladium(II). Due to their geometric and electronic preorganisation they form stable square-planar chelate complexes with palladium(II). For the development of the solvent extractant a series of unsaturated dithioethers, which are based on a rigid 1,2-dithioethene unit that is imbedded in an electron-withdrawing backbone, with polar end-groups has been synthesised. In addition to the determination of the crystal structures of the ligands and their dichloridopalladium complexes, the electro- and photochemical properties, the complex stabilities and the behaviour in solution have been investigated. Solvent extraction experiments showed the superiority of some of our ligands over conventionally used extractants in terms of their very fast reaction rates. Considering criteria that are essential for industrial utilisation like: robustness towards oxidation, achieving of high extraction yields (even at a high hydrochloric acid content of the leach liquor), fast extraction kinetics and a high selectivity for palladium(II), 1,2-bis(2-methoxyethylthio)benzene was selected as the extractant of choice. Building on this a solvent extraction system close to industrial practice was devised. After stepwise adaption of the aqueous phase from a model solution to the oxidising hydrochloric leach liquor, the selection of a diluent suitable for commercial operations (1,2-dichlorobenzene) and of an efficient stripping agent (0.5 M thiourea in 0.1 M HCl) has been accomplished. The high selectivity of that solvent extraction system for palladium(II) could be verified and its reusability and suitability for practical application have been proven. Further it was shown that small amounts of the thioether sulfoxide 1-[(2-methoxyethyl)sulfanyl]-2-[(2-methoxyethyl)sulfinyl]benzene form when the dithioether ligand 1,2-bis(2-methoxyethylthio)benzene gets in contact with oxidising media. Under acidic conditions this thioether sulfoxide gets protonated and accelerates the extraction like a phase transfer catalyst; without decreasing the selectivity for palladium(II). The molecular structure of the corresponding dichloridopalladium complex reveals that the nonprotonated ligand coordinates palladium(II) in a similar manner to the dithioether via the chelating sulfur atoms. Mixtures of oligo(dithioether) ligands and the monomeric 1,2-bis(2-methoxyethylthio)benzene have been adsorbed on silica gel and amberlite® XAD 2. These SIRs (solvent impregnated resins) have been used for solid phase extraction experiments. The oligo(dithioether) ligands are based on 1,2- dithiobenzene or 1,2-dithiomaleonitrile units, which are connected via tris(oxyethylene)ethylene or trimethylene chains. With the help of batch experiments it could be shown how structural differences, like the chelating unit, the kind of linking chain and the type of supporting material, impact the extraction yield, kinetics and loading capacity. The SIRs containing silica gel establish the extraction equilibrium much faster than those containing amberlite® XAD 2. On the other hand, the extractants permanently remain on amberlite® XAD 2, in contrast to silica gel. In a hydrochloric medium 1,2-dithiobenzene derivatives are better extractants than 1,2-dithiomaleonitrile derivatives. In column experiments with the oxidising hydrochloric leach liquor and reusable SIRs based on 1,2-dithiobenzene derivatives impregnated into amberlite® XAD 2, it appeared that for the implementation of high loading capacities very low flow rates are required. The selectivity for palladium(II) of these solid phase extractants could be demonstrated, although the eluates, in contrast to the eluates gained from the solvent extraction experiments, contained not only palladium but also small amounts of platinum, aluminium, iron and lead. KW - Palladium KW - Schwefel-Ligand KW - Chelate KW - Ligandendesign KW - Flüssig-Flüssig-Extraktion KW - Fest-Flüssig-Extraktion KW - palladium KW - sulfur ligands KW - chelates KW - ligand design KW - solvent extraction KW - solid phase extraction Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64753 ER - TY - JOUR A1 - Schmidt, Bernd A1 - Kunz, Oliver A1 - Petersen, Monib H. T1 - Total syntheses of naturally occurring seimatopolide a and its enantiomer from chiral pool starting materials using a bidirectional strategy JF - The journal of organic chemistry N2 - Enantioselective total syntheses of both enantiomers of the recently isolated decanolide natural product seimatopolide A are described. The C-2-symmetric building blocks (R,R)-hexa-1,5-diene-3,4-diol (derived from D-mannitol) and its enantiomer (derived from L-(+)-tartrate) serve as key starting materials, which are elaborated in a bidirectional way using a selective mono-cross-metathesis, regio- and stereoselective epoxidation, and regioselective reductive epoxide opening to furnish the first fragment. Both enantiomers of the second fragment, 3-hydroxypent-4-enoic acid, were conveniently obtained through a lipase-catalyzed kinetic resolution and merged with the first fragment via Shiina esterification. An E-selective ring-closing metathesis was used to access the 10-membered lactone. A comparison of the specific optical rotations of synthetic seimatopolides with those reported for the natural product suggests that the originally assigned (3R,6R,7R,9S)-configuration should be corrected to (3S,6S,7S,9R). Y1 - 2012 U6 - https://doi.org/10.1021/jo302359h SN - 0022-3263 VL - 77 IS - 23 SP - 10897 EP - 10906 PB - American Chemical Society CY - Washington ER - TY - THES A1 - Bilkay, Taybet T1 - Thiophen und Benzodithiophen basierte organische Halbleiter für aus Lösung prozessierbare Feldeffekttransistoren T1 - Thiophene and benzodithiophene based organic semiconductors for solution processable field effect transistors N2 - Diese Arbeit befasst sich mit der Synthese und Charakterisierung von organolöslichen Thiophen und Benzodithiophen basierten Materialien und ihrer Anwendung als aktive lochleitende Halbleiterschichten in Feldeffekttransistoren. Im ersten Teil der Arbeit wird durch eine gezielte Modifikation des Thiophengrundgerüstes eine neue Comonomer-Einheit für die Synthese von Thiophen basierten Copolymeren erfolgreich dargestellt. Die hydrophoben Hexylgruppen in der 3-Position des Thiophens werden teilweise durch hydrophile 3,6-Dioxaheptylgruppen ersetzt. Über die Grignard-Metathese nach McCullough werden statistische Copolymere mit unterschiedlichen molaren Anteilen vom hydrophoben Hexyl- und hydrophilem 3,6-Dioxaheptylgruppen 1:1 (P-1), 1:2 (P-2) und 2:1 (P-3) erfolgreich hergestellt. Auch die Synthese eines definierten Blockcopolymers BP-1 durch sequentielle Addition der Comonomere wird realisiert. Optische und elektrochemische Eigenschaften der neuartigen Copolymere sind vergleichbar mit P3HT. Mit allen Copolymeren wird ein charakteristisches Transistorverhalten in einem Top-Gate/Bottom-Kontakt-Aufbau erhalten. Dabei werden mit P-1 als die aktive Halbleiterschicht im Bauteil, PMMA als Dielektrikum und Silber als Gate-Elektrode Mobilitäten von bis zu 10-2 cm2/Vs erzielt. Als Folge der optimierten Grenzfläche zwischen Dielektrikum und Halbleiter wird eine Verbesserung der Luftstabilität der Transistoren über mehrere Monate festgestellt. Im zweiten Teil der Arbeit werden Benzodithiophen basierte organische Materialien hergestellt. Für die Synthese der neuartigen Benzodithiophen-Derivate wird die Schlüsselverbindung TIPS-BDT in guter Ausbeute dargestellt. Die Difunktionalisierung von TIPS-BDT in den 2,6-Positionen über eine elektrophile Substitution liefert die gewünschten Dibrom- und Distannylmonomere. Zunächst werden über die Stille-Reaktion alternierende Copolymere mit alkylierten Fluoren- und Chinoxalin-Einheiten realisiert. Alle Copolymere zeichnen sich durch eine gute Löslichkeit in gängigen organischen Lösungsmitteln, hohe thermische Stabilität und durch gute Filmbildungseigenschaften aus. Des Weiteren sind alle Copolymere mit HOMO Lagen höher als -6.3 eV, verglichen mit den Thiophen basierten Copolymeren (P-1 bis P-3), sehr oxidationsstabil. Diese Copolymere zeigen amorphes Verhalten in den Halbleiterschichten in OFETs auf und es werden Mobilitäten bis zu 10-4 cm2/Vs erreicht. Eine Abhängigkeit der Bauteil-Leistung von dem Zinngehalt-Rest im Polymer wird nachgewiesen. Ein Zinngehalt von über 0.6 % kann enormen Einfluss auf die Mobilität ausüben, da die funktionellen SnMe3-Gruppen als Fallenzustände wirken können. Alternativ wird das alternierende TIPS-BDT/Fluoren-Copolymer P-5-Stille nach der Suzuki-Methode polymerisiert. Mit P-5-Suzuki als die aktive organische Halbleiterschicht im OFET wird die höchste Mobilität von 10-2 cm2/Vs erzielt. Diese Mobilität ist somit um zwei Größenordnungen höher als bei P-5-Stille, da die Fallenzustände in diesem Fall minimiert werden und folglich der Ladungstransport verbessert wird. Sowohl das Homopolymer P-12 als auch das Copolymer mit dem aromatischen Akzeptor Benzothiadiazol P-9 führen zu schwerlöslichen Polymeren. Aus diesem Grund werden einerseits Terpolymere aus TIPS-BDT/Fluoren/BTD-Einheiten P-10 und P-11 aufgebaut und andererseits wird versucht die TIPS-BDT-Einheit in die Seitenkette des Styrols einzubringen. Mit der Einführung von BTD in die Hauptpolymerkette werden insbesondere die Absorptions- und die elektrochemischen Eigenschaften beeinflusst. Im Vergleich zu dem TIPS-BDT/Fluoren-Copolymer reicht die Absorption bis in den sichtbaren Bereich und die LUMO Lage wird zu niederen Werten verschoben. Eine Verbesserung der Leistung in den Bauteilen wird jedoch nicht festgestellt. Die erfolgreiche erstmalige Synthese von TIPS-BDT als Seitenkettenpolymer an Styrol P-13 führt zu einem löslichen und amorphen Polymer mit vergleichbaren Mobilitäten von Styrol basierten Polymeren (µ = 10-5 cm2/Vs) im OFET. Ein weiteres Ziel dieser Arbeit ist die Synthese von niedermolekularen organolöslichen Benzodithiophen-Derivaten. Über Suzuki- und Stille-Reaktionen ist es erstmals möglich, verschiedenartige Aromaten über eine σ-Bindung an TIPS-BDT in den 2,6-Positionen zu knüpfen. Die UV/VIS-Untersuchungen zeigen, dass die Absorption durch die Verlängerung der π-Konjugationslänge zu höheren Wellenlängen verschoben wird. Darüber hinaus ist es möglich, thermisch vernetzbare Gruppen wie Allyloxy in das Molekülgerüst einzubauen. Das Einführen von F-Atomen in das Molekülgerüst resultiert in einer verstärkten Packungsordnung im Fluorbenzen funktionalisiertem TIPS-BDT (SM-4) im Festkörper mit sehr guten elektronischen Eigenschaften im OFET, wobei Mobilitäten bis zu 0.09 cm2/Vs erreicht werden. N2 - This work describes the synthesis and characterization of organo-soluble thiophene and benzodithiophene based materials and their application as hole-transporting active semiconductor layers in field effect transistors. The first part of this work introduces the targeted modification of the thiophene base unit, obtaining new comonomers for the corresponding copolymers. The hydrophobic hexyl groups in the 3-position of thiophene are partially replaced by hydrophilic 3,6-Dioxaheptyl groups. Using the Grignard metathesis developed by McCullough, statistical copolymers with different molar ratios of hydrophobic and hydrophilic side groups 1:1 (P-1), 1:2 (P-2) and 2:1 (P-3) are synthesized. Furthermore a defined blockcopolymer is synthesized by a sequential comonomer addition. Optical and electrochemical properties of the novel copolymers are comparable to the homopolymer P3HT. All copolymers show clearly transistor characteristics in a top-gate/bottom-contact configuration. Devices with P-1 as active semiconductor layer, PMMA as dielectric and silver as the gate electrode show mobilities up to 10-2 cm2/Vs. As a result of the optimized semiconductor and dielectric interface an improvement of the air stability of the transistors is observed for several months. The second part describes the synthesis of benzodithiophene based organic materials. For the synthesis of the novel benzodithiophene-derivatives the key intermediate TIPS-BDT is obtained in high yields. A difunctionalization of TIPS-BDT in 2,6-position is observed by electrophilic substitution reactions and provided the desired dibromo- and distannyl-monomers. Via Stille-reaction alternated copolymers with alkylated fluorene and quinoxaline groups are synthesized. All copolymers are soluble in common organic solvents, show high thermal stability and good film forming properties. Furthermore all copolymers have HOMO values above -6.3 eV and are more oxidation stable compared to the thiophene based copolymers (P-1 up to P-3). These copolymers show an amorphous behavior as semiconductor layer in OFETs and mobilities up to 10-4 cm2/Vs are observed. A correlation between the device performance and the tin amount in the polymer could be demonstrated. Hence the functional SnMe3 groups can act as traps, a tin amount higher than 0.6 % can negatively influence the mobility. Alternatively the alternated TIPS-BDT/Fluoren-copolymer P-5-Stille is polymerized by the Suzuki-Method. The highest mobility of 10-2 cm2/Vs is obtained with P-5-Suzuki as active semiconductor layer in OFET. In comparison to P-5-Stille this mobility is two orders of magnitude higher, because in P-5-Suzuki traps are minimized and the charge transfer is improved. The synthesis of homopolymer P-12 as well as the copolymer with aromatic benzothiadiazole P-9 resulted in insoluble polymers. For this reason terpolymers containing TIPS-BDT/Fluoren/BTD units are designed. Additionally an attempt has been made to introduce the TIPS-BDT unit in the side chain of styrene. The introduction of BTD in the conjugated main chain influences especially the absorption and electrochemical properties. Compared to TIPS-BDT/Fluoren-copolymer the absorption of the terpolymer is shifted to the visible region and the LUMO values decreased. An improvement in the device performance is not observed. A side chain polystyrene containing TIPS-BDT P-13 is synthesized successfully. The amorphous and soluble P-13 showed comparable mobilities (µ = 10-5 cm2/Vs) as known styrene based polymers. A further aim of this work is the synthesis of organo-soluble benzodithiophene based small molecules. Using Suzuki- and Stille-reactions different aromatic cores as endcappers are connected by σ-bonds at the 2,6-position of TIPS-BDT. UV/VIS-measurements show a red-shift of the absorption maxima with extension of the π-conjugated system. Furthermore it is possible to introduce thermal cross linkable allyloxy-groups. The F-atoms in the molecule lead to stronger intermolecular interactions in the solid state, which improves the electronic properties and lead to high mobilities up to 0.09 cm2/Vs for TIPS-BDT (SM-4). KW - Thiophen und Benzodithiophen Copolymere KW - konjugierte kleine Moleküle KW - organische Halbleiter KW - OFET KW - Ladungstransport KW - Thiophene and Benzodithiophene copolymers KW - conjugated small molecules KW - organic semiconductors KW - OFET KW - charge transfer Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-66164 ER - TY - JOUR A1 - Miasnikova, Anna A1 - Laschewsky, André A1 - De Paoli, Gabriele A1 - Papadakis, Christine M. A1 - Müller-Buschbaum, Peter A1 - Funari, Sergio S. T1 - Thermoresponsive Hydrogels from Symmetrical Triblock Copolymers Poly(styrene-block-(methoxy diethylene glycol acrylate)-block-styrene) JF - Langmuir N2 - A series of symmetrical, thermo-responsive triblock copolymers was prepared by reversible addition fragmentation chain transfer (RAFT) polymerization, and studied in aqueous solution with respect to their ability to form hydrogels. Triblock copolymers were composed of two identical, permanently hydrophobic outer blocks, made of low molar mass polystyrene, and of a hydrophilic inner block of variable length, consisting of poly(methoxy diethylene glycol acrylate) PMDEGA. The polymers exhibited a LCST-type phase transition in the range of 20-40 degrees C, which markedly depended on molar mass and concentration. Accordingly, the triblock copolymers behaved as amphiphiles at low temperatures, but became water-insoluble at high temperatures. The temperature dependent self-assembly of the amphiphilic block copolymers in aqueous solution was studied by turbidimetry and rheology at concentrations up to 30 wt %, to elucidate the impact of the inner thermoresponsive block on the gel properties. Additionally, small-angle X-ray scattering (SAXS) was performed to access the structural changes in the gel with temperature. For all polymers a gel phase was obtained at low temperatures, which underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurred. With increasing length of the PMDEGA inner block, the gel-sol transition shifts to markedly lower concentrations, as well as to higher transition temperatures. For the longest PMDEGA block studied (DPn about 450), gels had already formed at 3.5 wt % at low temperatures. The gel-sol transition of the hydrogels and the LCST-type phase transition of the hydrophilic inner block were found to be independent of each other. Y1 - 2012 U6 - https://doi.org/10.1021/la204665q SN - 0743-7463 VL - 28 IS - 9 SP - 4479 EP - 4490 PB - American Chemical Society CY - Washington ER -