TY - JOUR A1 - Lukan, Tjaša A1 - Machens, Fabian A1 - Coll, Anna A1 - Baebler, Špela A1 - Messerschmidt, Katrin A1 - Gruden, Kristina T1 - Plant X-tender BT - an extension of the AssemblX system for the assembly and expression of multigene constructs in plants JF - PLOS ONE N2 - Cloning multiple DNA fragments for delivery of several genes of interest into the plant genome is one of the main technological challenges in plant synthetic biology. Despite several modular assembly methods developed in recent years, the plant biotechnology community has not widely adopted them yet, probably due to the lack of appropriate vectors and software tools. Here we present Plant X-tender, an extension of the highly efficient, scar-free and sequence-independent multigene assembly strategy AssemblX, based on overlap-depended cloning methods and rare-cutting restriction enzymes. Plant X-tender consists of a set of plant expression vectors and the protocols for most efficient cloning into the novel vector set needed for plant expression and thus introduces advantages of AssemblX into plant synthetic biology. The novel vector set covers different backbones and selection markers to allow full design flexibility. We have included ccdB counterselection, thereby allowing the transfer of multigene constructs into the novel vector set in a straightforward and highly efficient way. Vectors are available as empty backbones and are fully flexible regarding the orientation of expression cassettes and addition of linkers between them, if required. We optimised the assembly and subcloning protocol by testing different scar-less assembly approaches: the noncommercial SLiCE and TAR methods and the commercial Gibson assembly and NEBuilder HiFi DNA assembly kits. Plant X-tender was applicable even in combination with low efficient homemade chemically competent or electrocompetent Escherichia coli. We have further validated the developed procedure for plant protein expression by cloning two cassettes into the newly developed vectors and subsequently transferred them to Nicotiana benthamiana in a transient expression setup. Thereby we show that multigene constructs can be delivered into plant cells in a streamlined and highly efficient way. Our results will support faster introduction of synthetic biology into plant science. Y1 - 2018 U6 - https://doi.org/10.1371/journal.pone.0190526 SN - 1932-6203 VL - 13 IS - 1 PB - Public Library of Science CY - San Fransisco ER - TY - JOUR A1 - Hochrein, Lena A1 - Mitchell, Leslie A. A1 - Schulz, Karina A1 - Messerschmidt, Katrin A1 - Müller-Röber, Bernd T1 - L-SCRaMbLE as a tool for light-controlled Cre-mediated recombination in yeast JF - Nature Communications N2 - The synthetic yeast genome constructed by the International Synthetic Yeast Sc2.0 consortium adds thousands of loxPsym recombination sites to all 16 redesigned chromosomes, allowing the shuffling of Sc2.0 chromosome parts by the Cre-loxP recombination system thereby enabling genome evolution experiments. Here, we present L-SCRaMbLE, a lightcontrolled Cre recombinase for use in the yeast Saccharomyces cerevisiae. L-SCRaMbLE allows tight regulation of recombinase activity with up to 179-fold induction upon exposure to red light. The extent of recombination depends on induction time and concentration of the chromophore phycocyanobilin (PCB), which can be easily adjusted. The tool presented here provides improved recombination control over the previously reported estradiol-dependent SCRaMbLE induction system, mediating a larger variety of possible recombination events in SCRaMbLE-ing a reporter plasmid. Thereby, L-SCRaMbLE boosts the potential for further customization and provides a facile application for use in the S. cerevisiae genome reengineering project Sc2.0 or in other recombination-based systems. Y1 - 2018 U6 - https://doi.org/10.1038/s41467-017-02208-6 SN - 2041-1723 VL - 9 PB - Nature Publ. Group CY - London ER - TY - JOUR A1 - Göthel, Markus A1 - Listek, Martin A1 - Messerschmidt, Katrin A1 - Schlör, Anja A1 - Hönow, Anja A1 - Hanack, Katja T1 - A New Workflow to Generate Monoclonal Antibodies against Microorganisms JF - Applied Sciences N2 - Monoclonal antibodies are used worldwide as highly potent and efficient detection reagents for research and diagnostic applications. Nevertheless, the specific targeting of complex antigens such as whole microorganisms remains a challenge. To provide a comprehensive workflow, we combined bioinformatic analyses with novel immunization and selection tools to design monoclonal antibodies for the detection of whole microorganisms. In our initial study, we used the human pathogenic strain E. coli O157:H7 as a model target and identified 53 potential protein candidates by using reverse vaccinology methodology. Five different peptide epitopes were selected for immunization using epitope-engineered viral proteins. The identification of antibody-producing hybridomas was performed by using a novel screening technology based on transgenic fusion cell lines. Using an artificial cell surface receptor expressed by all hybridomas, the desired antigen-specific cells can be sorted fast and efficiently out of the fusion cell pool. Selected antibody candidates were characterized and showed strong binding to the target strain E. coli O157:H7 with minor or no cross-reactivity to other relevant microorganisms such as Legionella pneumophila and Bacillus ssp. This approach could be useful as a highly efficient workflow for the generation of antibodies against microorganisms. KW - monoclonal antibody KW - antibody producing cell selection KW - hybridoma KW - epitope prediction Y1 - 2021 U6 - https://doi.org/10.3390/app11209359 SN - 1454-5101 VL - 11 IS - 20 PB - MDPI CY - Basel ER - TY - GEN A1 - Göthel, Markus A1 - Listek, Martin A1 - Messerschmidt, Katrin A1 - Schlör, Anja A1 - Hönow, Anja A1 - Hanack, Katja T1 - A New Workflow to Generate Monoclonal Antibodies against Microorganisms T2 - Mathematisch-Naturwissenschaftliche Reihe N2 - Monoclonal antibodies are used worldwide as highly potent and efficient detection reagents for research and diagnostic applications. Nevertheless, the specific targeting of complex antigens such as whole microorganisms remains a challenge. To provide a comprehensive workflow, we combined bioinformatic analyses with novel immunization and selection tools to design monoclonal antibodies for the detection of whole microorganisms. In our initial study, we used the human pathogenic strain E. coli O157:H7 as a model target and identified 53 potential protein candidates by using reverse vaccinology methodology. Five different peptide epitopes were selected for immunization using epitope-engineered viral proteins. The identification of antibody-producing hybridomas was performed by using a novel screening technology based on transgenic fusion cell lines. Using an artificial cell surface receptor expressed by all hybridomas, the desired antigen-specific cells can be sorted fast and efficiently out of the fusion cell pool. Selected antibody candidates were characterized and showed strong binding to the target strain E. coli O157:H7 with minor or no cross-reactivity to other relevant microorganisms such as Legionella pneumophila and Bacillus ssp. This approach could be useful as a highly efficient workflow for the generation of antibodies against microorganisms. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1174 KW - monoclonal antibody KW - antibody producing cell selection KW - hybridoma KW - epitope prediction Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-523341 SN - 1866-8372 IS - 20 ER - TY - GEN A1 - Messerschmidt, Katrin A1 - Machens, Fabian A1 - Hochrein, Lena A1 - Naseri, Gita T1 - Orthogonal, light-inducible protein expression platform in yeast Sacchararomyces cerevisiae T2 - New biotechnology Y1 - 2018 U6 - https://doi.org/10.1016/j.nbt.2018.05.153 SN - 1871-6784 SN - 1876-4347 VL - 44 SP - S19 EP - S19 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - de la Cruz, Jorge Gonzalez A1 - Machens, Fabian A1 - Messerschmidt, Katrin A1 - Bar-Even, Arren T1 - Core Catalysis of the Reductive Glycine Pathway Demonstrated in Yeast JF - ACS synthetic biology N2 - One-carbon (C1) compounds are attractive microbial feedstocks as they can be efficiently produced from widely available resources. Formate, in particular, represents a promising growth substrate, as it can be generated from electrochemical reduction of CO2 and fed to microorganisms in a soluble form. We previously identified the synthetic reductive glycine pathway as the most efficient route for aerobic growth on formate. We further demonstrated pathway activity in Escherichia coli after expression of both native and foreign genes. Here, we explore whether the reductive glycine pathway could be established in a model microorganism using only native enzymes. We used the yeast Saccharomyces cerevisiae as host and show that overexpression of only endogenous enzymes enables glycine biosynthesis from formate and CO2 in a strain that is otherwise auxotrophic for glycine. We find the pathway to be highly active in this host, where 0.125 mM formate is sufficient to support growth. Notably, the formate-dependent growth rate of the engineered S. cerevisiae strain remained roughly constant over a very wide range of formate concentrations, 1-500 mM, indicating both high affinity for formate use and high tolerance toward elevated concentration of this C1 feedstock. Our results, as well the availability of endogenous NAD-dependent formate dehydrogenase, indicate that yeast might be an especially suitable host for engineering growth on formate. KW - metabolic engineering KW - synthetic biology KW - one-carbon metabolism KW - carbon labeling KW - tetrahydrofolate KW - glycine cleavage system Y1 - 2019 U6 - https://doi.org/10.1021/acssynbio.8b00464 SN - 2161-5063 VL - 8 IS - 5 SP - 911 EP - 917 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Rieck, Christoph Paul Kurt A1 - Geiger, Daniel A1 - Munkert, Jennifer A1 - Messerschmidt, Katrin A1 - Petersen, Jan A1 - Strasser, Juliane A1 - Meitinger, Nadine A1 - Kreis, Wolfgang T1 - Biosynthetic approach to combine the first steps of cardenolide formation in Saccharomyces cerevisiae JF - Microbiologyopen N2 - A yeast expression plasmid was constructed containing a cardenolide biosynthetic module, referred to as CARD II, using the AssemblX toolkit, which enables the assembly of large DNA constructs. The genes cloned into the vector were (a) a Δ5‐3β‐hydroxysteroid dehydrogenase gene from Digitalis lanata, (b) a steroid Δ5‐isomerase gene from Comamonas testosteronii, (c) a mutated steroid‐5β‐reductase gene from Arabidopsis thaliana, and (d) a steroid 21‐hydroxylase gene from Mus musculus. A second plasmid bearing an ADR/ADX fusion gene from Bos taurus was also constructed. A Saccharomyces cerevisiae strain bearing these two plasmids was generated. This strain, termed “CARD II yeast”, was capable of producing 5β‐pregnane‐3β,21‐diol‐20‐one, a central intermediate in 5β‐cardenolide biosynthesis, starting from pregnenolone which was added to the culture medium. Using this approach, five consecutive steps in cardenolide biosynthesis were realized in baker's yeast. Y1 - 2019 U6 - https://doi.org/10.1002/mbo3.925 SN - 2045-8827 VL - 8 IS - 12 PB - Wiley CY - Hoboken ER - TY - GEN A1 - Lukan, Tjaša A1 - Machens, Fabian A1 - Coll, Anna A1 - Baebler, Špela A1 - Messerschmidt, Katrin A1 - Gruden, Kristina T1 - Plant X-tender BT - an extension of the AssemblX system for the assembly and expression of multigene constructs in plants T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Cloning multiple DNA fragments for delivery of several genes of interest into the plant genome is one of the main technological challenges in plant synthetic biology. Despite several modular assembly methods developed in recent years, the plant biotechnology community has not widely adopted them yet, probably due to the lack of appropriate vectors and software tools. Here we present Plant X-tender, an extension of the highly efficient, scarfree and sequence-independent multigene assembly strategy AssemblX,based on overlapdepended cloning methods and rare-cutting restriction enzymes. Plant X-tender consists of a set of plant expression vectors and the protocols for most efficient cloning into the novel vector set needed for plant expression and thus introduces advantages of AssemblX into plant synthetic biology. The novel vector set covers different backbones and selection markers to allow full design flexibility. We have included ccdB counterselection, thereby allowing the transfer of multigene constructs into the novel vector set in a straightforward and highly efficient way. Vectors are available as empty backbones and are fully flexible regarding the orientation of expression cassettes and addition of linkers between them, if required. We optimised the assembly and subcloning protocol by testing different scar-less assembly approaches: the noncommercial SLiCE and TAR methods and the commercial Gibson assembly and NEBuilder HiFi DNA assembly kits. Plant X-tender was applicable even in combination with low efficient homemade chemically competent or electrocompetent Escherichia coli. We have further validated the developed procedure for plant protein expression by cloning two cassettes into the newly developed vectors and subsequently transferred them to Nicotiana benthamiana in a transient expression setup. Thereby we show that multigene constructs can be delivered into plant cells in a streamlined and highly efficient way. Our results will support faster introduction of synthetic biology into plant science. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 990 KW - ligation cloning extract KW - DNA cloning KW - synthetic biology KW - multiple genes KW - vector system KW - transformation KW - recombination KW - protein KW - RNA KW - Methylation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-446281 SN - 1866-8372 IS - 990 ER - TY - JOUR A1 - Hochrein, Lena A1 - Machens, Fabian A1 - Gremmels, Juergen A1 - Schulz, Karina A1 - Messerschmidt, Katrin A1 - Mueller-Roeber, Bernd T1 - AssemblX: a user-friendly toolkit for rapid and reliable multi-gene assemblies JF - Nucleic acids research N2 - The assembly of large DNA constructs coding for entire pathways poses a major challenge in the field of synthetic biology. Here, we present AssemblX, a novel, user-friendly and highly efficient multi-gene assembly strategy. The software-assisted AssemblX process allows even unexperienced users to rapidly design, build and test DNA constructs with currently up to 25 functional units, from 75 or more subunits. At the gene level, AssemblX uses scar-free, overlap-based and sequence-independent methods, allowing the unrestricted design of transcriptional units without laborious parts domestication. The assembly into multi-gene modules is enabled via a standardized, highly efficient, polymerase chain reaction-free and virtually sequence-independent scheme, which relies on rare cutting restriction enzymes and optimized adapter sequences. Selection and marker switching strategies render the whole process reliable, rapid and very effective. The assembly product can be easily transferred to any desired expression host, making AssemblX useful for researchers from various fields. Y1 - 2017 U6 - https://doi.org/10.1093/nar/gkx034 SN - 0305-1048 SN - 1362-4962 VL - 45 PB - Oxford Univ. Press CY - Oxford ER - TY - JOUR A1 - Naseri, Gita A1 - Balazadeh, Salma A1 - Machens, Fabian A1 - Kamranfar, Iman A1 - Messerschmidt, Katrin A1 - Müller-Röber, Bernd T1 - Plant-Derived Transcription Factors for Orthologous Regulation of Gene Expression in the Yeast Saccharomyces cerevisiae JF - ACS synthetic biology N2 - Control of gene expression by transcription factors (TFs) is central in many synthetic biology projects for which a tailored expression of one or multiple genes is often needed. As TFs from evolutionary distant organisms are unlikely to affect gene expression in a host of choice, they represent excellent candidates for establishing orthogonal control systems. To establish orthogonal regulators for use in yeast (Saccharomyces cerevisiae), we chose TFs from the plant Arabidopsis thaliana. We established a library of 106 different combinations of chromosomally integrated TFs, activation domains (yeast GAL4 AD, herpes simplex virus VP64, and plant EDLL) and synthetic promoters harboring cognate cis regulatory motifs driving a yEGFP reporter. Transcriptional output of the different driver/reporter combinations varied over a wide spectrum, with EDLL being a considerably stronger transcription activation domain in yeast than the GAL4 activation domain, in particular when fused to Arabidopsis NAC TFs. Notably, the strength of several NAC-EDLL fusions exceeded that of the strong yeast TDH3 promoter by 6- to 10-fold. We furthermore show that plant TFs can be used to build regulatory systems encoded by centromeric or episomal plasmids. Our library of TF-DNA binding site combinations offers an excellent tool for diverse synthetic biology applications in yeast. KW - Arabidopsis thaliana KW - artificial transcription factor KW - NAC transcription factor KW - synthetic biology KW - plant Y1 - 2017 U6 - https://doi.org/10.1021/acssynbio.7b00094 SN - 2161-5063 VL - 6 SP - 1742 EP - 1756 PB - American Chemical Society CY - Washington ER -