TY - JOUR A1 - Roling, Wiebke M. A1 - Grum, Marcus A1 - Gronau, Norbert A1 - Kluge, Annette T1 - The roots of errors in adaptive performance BT - clustering behavioral patterns after the introduction of a change JF - Journal of workplace learning N2 - Purpose The purpose of this study was to investigate work-related adaptive performance from a longitudinal process perspective. This paper clustered specific behavioral patterns following the introduction of a change and related them to retentivity as an individual cognitive ability. In addition, this paper investigated whether the occurrence of adaptation errors varied depending on the type of change content. Design/methodology/approach Data from 35 participants collected in the simulated manufacturing environment of a Research and Application Center Industry 4.0 (RACI) were analyzed. The participants were required to learn and train a manufacturing process in the RACI and through an online training program. At a second measurement point in the RACI, specific manufacturing steps were subject to change and participants had to adapt their task execution. Adaptive performance was evaluated by counting the adaptation errors. Findings The participants showed one of the following behavioral patterns: (1) no adaptation errors, (2) few adaptation errors, (3) repeated adaptation errors regarding the same actions, or (4) many adaptation errors distributed over many different actions. The latter ones had a very low retentivity compared to the other groups. Most of the adaptation errors were made when new actions were added to the manufacturing process. Originality/value Our study adds empirical research on adaptive performance and its underlying processes. It contributes to a detailed understanding of different behaviors in change situations and derives implications for organizational change management. KW - adaptive performance KW - behavioral patterns KW - change KW - process perspective KW - quantitative KW - retentivity KW - rype of change content Y1 - 2024 U6 - https://doi.org/10.1108/JWL-10-2023-0168 SN - 1366-5626 VL - 36 IS - 4 SP - 267 EP - 281 PB - Emerald CY - Bradford ER - TY - BOOK A1 - Grum, Marcus T1 - Construction of a concept of neuronal modeling N2 - The business problem of having inefficient processes, imprecise process analyses and simulations as well as non-transparent artificial neuronal network models can be overcome by an easy-to-use modeling concept. With the aim of developing a flexible and efficient approach to modeling, simulating and optimizing processes, this paper proposes a flexible Concept of Neuronal Modeling (CoNM). The modeling concept, which is described by the modeling language designed and its mathematical formulation and is connected to a technical substantiation, is based on a collection of novel sub-artifacts. As these have been implemented as a computational model, the set of CoNM tools carries out novel kinds of Neuronal Process Modeling (NPM), Neuronal Process Simulations (NPS) and Neuronal Process Optimizations (NPO). The efficacy of the designed artifacts was demonstrated rigorously by means of six experiments and a simulator of real industrial production processes. Y1 - 2022 SN - 978-3-658-35998-0 U6 - https://doi.org/10.1007/978-3-658-35999-7 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - JOUR A1 - Grum, Marcus A1 - Hiessl, Werner A1 - Maresch, Karl A1 - Gronau, Norbert T1 - Design of a neuronal training modeling language BT - exemplified with the AI-based dynamic GUI adaption JF - AIS-Transactions on enterprise systems N2 - As the complexity of learning task requirements, computer infrastruc- tures and knowledge acquisition for artificial neuronal networks (ANN) is in- creasing, it is challenging to talk about ANN without creating misunderstandings. An efficient, transparent and failure-free design of learning tasks by models is not supported by any tool at all. For this purpose, particular the consideration of data, information and knowledge on the base of an integration with knowledge- intensive business process models and a process-oriented knowledge manage- ment are attractive. With the aim of making the design of learning tasks express- ible by models, this paper proposes a graphical modeling language called Neu- ronal Training Modeling Language (NTML), which allows the repetitive use of learning designs. An example ANN project of AI-based dynamic GUI adaptation exemplifies its use as a first demonstration. KW - AI and business informatics KW - development of AI-based systems KW - AI-based decision support system KW - cooperative AI (human-in-the-loop) KW - process-oriented knowledge acquisition KW - modeling language Y1 - 2021 UR - https://www.aes-journal.com/index.php/ais-tes/article/view/20/18 U6 - https://doi.org/10.30844/aistes.v5i1.20 SN - 1867-7134 VL - 5 IS - 1 PB - GITO-Publ., Verl. für Industrielle Informationstechnik und Organisation CY - Berlin ER - TY - CHAP A1 - Klippert, Monika A1 - Stolpmann, Robert A1 - Grum, Marcus A1 - Thim, Christof A1 - Gronau, Norbert A1 - Albers, Albert T1 - Knowledge transfer quality improvement BT - the quality enhancement of knowledge transfers in product engineering T2 - Procedia CIRP N2 - Developing a new product generation requires the transfer of knowledge among various knowledge carriers. Several factors influence knowledge transfer, e.g., the complexity of engineering tasks or the competence of employees, which can decrease the efficiency and effectiveness of knowledge transfers in product engineering. Hence, improving those knowledge transfers obtains great potential, especially against the backdrop of experienced employees leaving the company due to retirement, so far, research results show, that the knowledge transfer velocity can be raised by following the Knowledge Transfer Velocity Model and implementing so-called interventions in a product engineering context. In most cases, the implemented interventions have a positive effect on knowledge transfer speed improvement. In addition to that, initial theoretical findings describe factors influencing the quality of knowledge transfers and outline a setting to empirically investigate how the quality can be improved by introducing a general description of knowledge transfer reference situations and principles to measure the quality of knowledge artifacts. To assess the quality of knowledge transfers in a product engineering context, the Knowledge Transfer Quality Model (KTQM) is created, which serves as a basis to develop and implement quality-dependent interventions for different knowledge transfer situations. As a result, this paper introduces the specifications of eight situation-adequate interventions to improve the quality of knowledge transfers in product engineering following an intervention template. Those interventions are intended to be implemented in an industrial setting to measure the quality of knowledge transfers and validate their effect. KW - knowledge transfer KW - product generation engineering KW - improvement KW - quality KW - intervention Y1 - 2023 U6 - https://doi.org/10.1016/j.procir.2023.02.171 SN - 2212-8271 VL - 119 SP - 919 EP - 925 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Grum, Marcus A1 - Blunk, Oliver A1 - Rojahn, Marcel A1 - Fettke, Peter A1 - Gronau, Norbert T1 - Research challenges of knowledge modelling and the outline of a research agenda T2 - Knowledge in digital age : IFKAD 2020 KW - knowledge management KW - process modelling KW - research challenges Y1 - 2020 SN - 978-88-96687-13-0 SN - 2280-787X PB - The Arts of Business Institute CY - Matera, Italy ER - TY - CHAP A1 - Grum, Marcus A1 - Klippert, Monika A1 - Albers, Albert A1 - Gronau, Norbert A1 - Thim, Christof T1 - Examining the quality of knowledge transfers BT - the draft of an empirical research T2 - Proceedings of the Design Society N2 - Already successfully used products or designs, past projects or our own experiences can be the basis for the development of new products. As reference products or existing knowledge, it is reused in the development process and across generations of products. Since further, products are developed in cooperation, the development of new product generations is characterized by knowledge-intensive processes in which information and knowledge are exchanged between different kinds of knowledge carriers. The particular knowledge transfer here describes the identification of knowledge, its transmission from the knowledge carrier to the knowledge receiver, and its application by the knowledge receiver, which includes embodied knowledge of physical products. Initial empirical findings of the quantitative effects regarding the speed of knowledge transfers already have been examined. However, the factors influencing the quality of knowledge transfer to increase the efficiency and effectiveness of knowledge transfer in product development have not yet been examined empirically. Therefore, this paper prepares an experimental setting for the empirical investigation of the quality of knowledge transfers. KW - knowledge management KW - new product development KW - evaluation Y1 - 2021 U6 - https://doi.org/10.1017/pds.2021.404 SN - 2732-527X VL - 1 SP - 1431 EP - 1440 PB - Cambridge University Press CY - Cambridge ER - TY - CHAP A1 - Grum, Marcus ED - Rutkowski, Leszek ED - Scherer, Rafał ED - Korytkowski, Marcin ED - Pedrycz, Witold ED - Tadeusiewicz, Ryszard ED - Zurada, Jacek M. T1 - Learning representations by crystallized back-propagating errors T2 - Artificial intelligence and soft computing N2 - With larger artificial neural networks (ANN) and deeper neural architectures, common methods for training ANN, such as backpropagation, are key to learning success. Their role becomes particularly important when interpreting and controlling structures that evolve through machine learning. This work aims to extend previous research on backpropagation-based methods by presenting a modified, full-gradient version of the backpropagation learning algorithm that preserves (or rather crystallizes) selected neural weights while leaving other weights adaptable (or rather fluid). In a design-science-oriented manner, a prototype of a feedforward ANN is demonstrated and refined using the new learning method. The results show that the so-called crystallizing backpropagation increases the control possibilities of neural structures and interpretation chances, while learning can be carried out as usual. Since neural hierarchies are established because of the algorithm, ANN compartments start to function in terms of cognitive levels. This study shows the importance of dealing with ANN in hierarchies through backpropagation and brings in learning methods as novel ways of interacting with ANN. Practitioners will benefit from this interactive process because they can restrict neural learning to specific architectural components of ANN and can focus further development on specific areas of higher cognitive levels without the risk of destroying valuable ANN structures. KW - artificial neural networks KW - backpropagation KW - knowledge crystallization KW - second-order conditioning KW - cognitive levels KW - NMDL Y1 - 2023 SN - 978-3-031-42504-2 SN - 978-3-031-42505-9 U6 - https://doi.org/10.1007/978-3-031-42505-9_8 SP - 78 EP - 100 PB - Springer CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Thim, Christof A1 - Roling, Wiebke A1 - Schüffler, Arnulf A1 - Kluge, Annette A1 - Gronau, Norbert ED - Masrour, Tawfik ED - El Hassani, Ibtissam ED - Barka, Noureddine T1 - AI case-based reasoning for artificial neural networks T2 - Artificial intelligence and industrial applications N2 - Faced with the triad of time-cost-quality, the realization of production tasks under economic conditions is not trivial. Since the number of Artificial-Intelligence-(AI)-based applications in business processes is increasing more and more nowadays, the efficient design of AI cases for production processes as well as their target-oriented improvement is essential, so that production outcomes satisfy high quality criteria and economic requirements. Both challenge production management and data scientists, aiming to assign ideal manifestations of artificial neural networks (ANNs) to a certain task. Faced with new attempts of ANN-based production process improvements [8], this paper continues research about the optimal creation, provision and utilization of ANNs. Moreover, it presents a mechanism for AI case-based reasoning for ANNs. Experiments clarify continuously improving ANN knowledge bases by this mechanism empirically. Its proof-of-concept is demonstrated by the example of four production simulation scenarios, which cover the most relevant use cases and will be the basis for examining AI cases on a quantitative level. KW - case-based reasoning KW - neural networks KW - industry 4.0 Y1 - 2023 SN - 978-3-031-43523-2 SN - 978-3-031-43524-9 U6 - https://doi.org/10.1007/978-3-031-43524-9_2 VL - 771 SP - 17 EP - 35 PB - Springer CY - Cham ER - TY - CHAP A1 - Grum, Marcus A1 - Rapp, Simon A1 - Gronau, Norbert A1 - Albers, Albert ED - Shishkov, Boris T1 - Accelerating knowledge BT - the speed optimization of knowledge transfers T2 - Business modeling and software design N2 - As knowledge-intensive processes are often carried out in teams and demand for knowledge transfers among various knowledge carriers, any optimization in regard to the acceleration of knowledge transfers obtains a great economic potential. Exemplified with product development projects, knowledge transfers focus on knowledge acquired in former situations and product generations. An adjustment in the manifestation of knowledge transfers in its concrete situation, here called intervention, therefore can directly be connected to the adequate speed optimization of knowledge-intensive process steps. This contribution presents the specification of seven concrete interventions following an intervention template. Further, it describes the design and results of a workshop with experts as a descriptive study. The workshop was used to assess the practical relevance of interventions designed as well as the identification of practical success factors and barriers of their implementation. KW - knowledge transfers KW - business process optimization KW - interventions KW - product development KW - product generation engineering KW - empirical evaluation Y1 - 2019 SN - 978-3-030-24853-6 SN - 978-3-030-24854-3 U6 - https://doi.org/10.1007/978-3-030-24854-3_7 VL - 356 SP - 95 EP - 113 PB - Springer CY - Cham ER - TY - CHAP A1 - Grum, Marcus ED - Shishkov, Boris T1 - Context-aware, intelligent musical instruments for improving knowledge-intensive business processes T2 - Business modeling and software design N2 - With shorter song publication cycles in music industries and a reduced number of physical contact opportunities because of disruptions that may be an obstacle for musicians to cooperate, collaborative time consumption is a highly relevant target factor providing a chance for feedback in contemporary music production processes. This work aims to extend prior research on knowledge transfer velocity by augmenting traditional designs of musical instruments with (I) Digital Twins, (II) Internet of Things and (III) Cyber-Physical System capabilities and consider a new type of musical instrument as a tool to improve knowledge transfers at knowledge-intensive forms of business processes. In a design-science-oriented way, a prototype of a sensitive guitar is constructed as information and cyber-physical system. Findings show that this intelligent SensGuitar increases feedback opportunities. This study establishes the importance of conversion-specific music production processes and novel forms of interactions at guitar playing as drivers of high knowledge transfer velocities in teams and among individuals. KW - business process KW - knowledge transfer KW - CPS KW - prototype Y1 - 2022 SN - 978-3-031-11509-7 SN - 978-3-031-11510-3 U6 - https://doi.org/10.1007/978-3-031-11510-3_5 VL - 453 SP - 69 EP - 88 PB - Springer CY - Cham ER -