TY - JOUR A1 - Brosnan, Sarah M. A1 - Schlaad, Helmut A1 - Antonietti, Markus T1 - Aqueous Self-Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles JF - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition N2 - Self-assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self-assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500nm) and microsized (>5m) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics. KW - block copolymers KW - polymersomes KW - polysaccharides KW - self-assembly KW - vesicles Y1 - 2015 U6 - https://doi.org/10.1002/anie.201502100 SN - 1433-7851 SN - 1521-3773 VL - 54 IS - 33 SP - 9715 EP - 9718 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Georgiev, Vasil N. A1 - Grafmüller, Andrea A1 - Bléger, David A1 - Hecht, Stefan A1 - Kunstmann, Sonja A1 - Barbirz, Stefanie A1 - Lipowsky, Reinhard A1 - Dimova, Rumiana T1 - Area increase and budding in giant vesicles triggered by light BT - behind the scene JF - Advanced science N2 - Biomembranes are constantly remodeled and in cells, these processes are controlled and modulated by an assortment of membrane proteins. Here, it is shown that such remodeling can also be induced by photoresponsive molecules. The morphological control of giant vesicles in the presence of a water-soluble ortho-tetrafluoroazobenzene photoswitch (F-azo) is demonstrated and it is shown that the shape transformations are based on an increase in membrane area and generation of spontaneous curvature. The vesicles exhibit budding and the buds can be retracted by using light of a different wavelength. In the presence of F-azo, the membrane area can increase by more than 5% as assessed from vesicle electrodeformation. To elucidate the underlying molecular mechanism and the partitioning of F-azo in the membrane, molecular dynamics simulations are employed. Comparison with theoretically calculated shapes reveals that the budded shapes are governed by curvature elasticity, that the spontaneous curvature can be decomposed into a local and a nonlocal contribution, and that the local spontaneous curvature is about 1/(2.5 mu m). The results show that exo- and endocytotic events can be controlled by light and that these photoinduced processes provide an attractive method to change membrane area and morphology. KW - azobenzene KW - lipid membranes KW - molecular dynamics KW - photoswitch KW - vesicles Y1 - 2018 U6 - https://doi.org/10.1002/advs.201800432 SN - 2198-3844 VL - 5 IS - 8 PB - Wiley CY - Hoboken ER - TY - GEN A1 - Georgiev, Vasil N. A1 - Grafmüller, Andrea A1 - Bléger, David A1 - Hecht, Stefan A1 - Kunstmann, Ruth Sonja A1 - Barbirz, Stefanie A1 - Lipowsky, Reinhard A1 - Dimova, Rumiana T1 - Area increase and budding in giant vesicles triggered by light BT - behind the scene T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Biomembranes are constantly remodeled and in cells, these processes are controlled and modulated by an assortment of membrane proteins. Here, it is shown that such remodeling can also be induced by photoresponsive molecules. The morphological control of giant vesicles in the presence of a water-soluble ortho-tetrafluoroazobenzene photoswitch (F-azo) is demonstrated and it is shown that the shape transformations are based on an increase in membrane area and generation of spontaneous curvature. The vesicles exhibit budding and the buds can be retracted by using light of a different wavelength. In the presence of F-azo, the membrane area can increase by more than 5% as assessed from vesicle electrodeformation. To elucidate the underlying molecular mechanism and the partitioning of F-azo in the membrane, molecular dynamics simulations are employed. Comparison with theoretically calculated shapes reveals that the budded shapes are governed by curvature elasticity, that the spontaneous curvature can be decomposed into a local and a nonlocal contribution, and that the local spontaneous curvature is about 1/(2.5 mu m). The results show that exo- and endocytotic events can be controlled by light and that these photoinduced processes provide an attractive method to change membrane area and morphology. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 733 KW - azobenzene KW - lipid membranes KW - molecular dynamics KW - photoswitch KW - vesicles Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-426298 SN - 1866-8372 VL - 5 IS - 733 ER - TY - THES A1 - Linke, Gunnar Torsten T1 - Eigenschaften fluider Vesikeln bei endlichen Temperaturen T1 - Properties of fluid vesicles at finite temperatures N2 - In der vorliegenden Arbeit werden die Eigenschaften geschlossener fluider Membranen, sogenannter Vesikeln, bei endlichen Temperaturen untersucht. Dies beinhaltet Betrachtungen zur Form freier Vesikeln, eine Untersuchung des Adhäsionsverhaltens von Vesikeln an planaren Substraten sowie eine Untersuchung der Eigenschaften fluider Vesikeln in eingeschränkten Geometrien. Diese Untersuchungen fanden mit Hilfe von Monte-Carlo-Simulationen einer triangulierten Vesikeloberfläche statt. Die statistischen Eigenschaften der fluktuierenden fluiden Vesikeln wurden zum Teil mittels Freier-Energie-Profile analysiert. In diesem Zusammenhang wurde eine neuartige Histogrammethode entwickelt.
Die Form für eine freie fluide Vesikel mit frei veränderlichem Volumen, die das Konfigurationsenergie-Funktional minimiert, ist im Falle verschwindender Temperatur eine Kugel. Mit Hilfe von Monte-Carlo-Simulationen sowie einem analytisch behandelbaren Modellsystem konnte gezeigt werden, daß sich dieses Ergebnis nicht auf endliche Temperaturen verallgemeinern lässt und statt dessen leicht prolate und oblate Vesikelformen gegenüber der Kugelgestalt überwiegen. Dabei ist die Wahrscheinlichkeit für eine prolate Form ein wenig gröoßer als für eine oblate. Diese spontane Asphärizität ist entropischen Ursprungs und tritt nicht bei zweidimensionalen Vesikeln auf. Durch osmotische Drücke in der Vesikel, die größer sind als in der umgebenden Flüssigkeit, lässt sich die Asphärizität reduzieren oder sogar kompensieren. Die Übergänge zwischen den beobachteten prolaten und oblaten Formen erfolgen im Bereich von Millisekunden in Abwesenheit osmotisch aktiver Partikel. Bei Vorhandensein derartiger Partikel ergeben sich Übergangszeiten im Bereich von Sekunden. Im Rahmen der Untersuchung des Adhäsionsverhaltens fluider Vesikeln an planaren, homogenen Substraten konnte mit Hilfe von Monte-Carlo-Simulationen festgestellt werden, dass die Eigenschaften der Kontaktfläche der Vesikeln stark davon abhängen, welche Kräfte den Kontakt bewirken. Für eine dominierende attraktive Wechselwirkung zwischen Substrat und Vesikelmembran sowie im Falle eines Massendichteunterschieds der Flüssigkeiten innerhalb und außerhalb der Vesikel, der die Vesikel auf das Substrat sinken lässt, fndet man innerhalb der Kontakt � ache eine ortsunabh� angige Verteilung des Abstands zwischen Vesikelmembran und Substrat. Drückt die Vesikel ohne Berücksichtigung osmotischer Effekte auf Grund einer Differenz der Massendichten der Membran und der umgebenden Flüssigkeit gegen das Substrat, so erhält man eine Abstandsverteilung zwischen Vesikelmembran und Substrat, die mit dem Abstand vom Rand der Kontaktfläche variiert. Dieser Effekt ist zudem temperaturabhängig. Ferner wurde die Adhäsion fluider Vesikeln an chemisch strukturierten planaren Substraten untersucht. Durch das Wechselspiel von entropischen Effekten und Konfigurationsenergien entsteht eine komplexe Abhängigkeit der Vesikelform von Biegesteifigkeit, osmotischen Bedingungen und der Geometrie der attraktiven Domänen. Für die Bestimmung der Biegesteifigkeit der Vesikelmembranen liefern die existierenden Verfahren stark voneinander abweichende Ergebnisse. In der vorliegenden Arbeit konnte mittels Monte-Carlo-Simulationen zur Bestimmung der Biegesteifigkeit anhand des Mikropipettenverfahrens von Evans gezeigt werden, dass dieses Verfahren die a priori für die Simulation vorgegebene Biegesteifigkeit im wesentlichen reproduzieren kann. Im Hinblick auf medizinisch-pharmazeutische Anwendungen ist der Durchgang fluider Vesikeln durch enge Poren relevant. In Monte-Carlo-Simulationen konnte gezeigt werden, dass ein spontaner Transport der Vesikel durch ein Konzentrationsgefälle osmotisch aktiver Substanzen, das den physiologischen Bedingungen entspricht, induziert werden kann. Es konnten die hierfür notwendigen osmotischen Bedingungen sowie die charakteristischen Zeitskalen abgeschätzt werden. Im realen Experiment sind Eindringzeiten in eine enge Pore im Bereich weniger Minuten zu erwarten. Ferner konnte beobachtet werden, dass bei Vesikeln mit einer homogenen, positiven spontanen Krümmung Deformationen hin zu prolaten Formen leichter erfolgen als bei Vesikeln ohne spontane Krümmung. Mit diesem Effekt ist eine Verringerung der Energiebarriere für das Eindringen in eine Pore verbunden, deren Radius nur wenig kleiner als der Vesikelradius ist. N2 - In this thesis, the properties of closed fluid membranes or vesicles are studied at finite temperatures. The work contains investigations of the shape of free vesicles, studies of the adhesion behavior of vesicles to planar substrates, and investigations of the properties of fluid vesicles in confined geometries. The investigations have been performed with Monte Carlo simulations of triangulated vesicles. The statistical properties of fluctuating vesicles have been analyzed in detail by means of free energy profiles. In this context, a new histogram method was developed. The shape of minimum configurational energy for a free vesicle without volume constraint at zero temperature is a sphere. It is shown by means of Monte Carlo simulations and a model which can be analyzed analytically, that this result does not apply to finite temperatures. Instead, prolate and oblate shapes prevail and the probability for a prolate shape is slightly larger than that for an oblate shape. This spontaneous asphericity is of entropic origin and cannot be observed in two dimensions. Osmotic pressures inside the vesicle that are larger than in the surrounding liquid may reduce or even compensate the asphericity. The transitions between the observed prolate and oblate states occur on the time scale of milliseconds in the absence of osmotically active particles and on the time scale of seconds in the presence of osmotically active particles. As far as the adhesion behavior of fluid vesicles to planar homogeneous substrates is concerned, Monte Carlo simulations reveal a strong dependence of the properties of the contact area on its driving force. In the case of a dominating attractive interaction between vesicle membran and substrate as well as for a mass density difference of the liquids inside and outside the vesicle, which push the vesicle against the substrate, the distribution of the distance between the vesicle membrane and the substrate is homogenous. If the vesicle is pushed against the substrate by a difference of the mass densities of the membrane and the surrounding liquid, neglecting all osmotic effects, one gets a distance distribution between the vesicle membrane and the substrate which varies with the distance from the rim of the contact area. Moreover, this effect is temperature-dependent. Furthermore, the adhesion of fluid vesicles to chemically structured planar substrates has been studied. The interplay between entropic effects and configurational energies causes a complex dependence of the vesicle shape on the bending rigidity, osmotic conditions, and the geometry of the attractive domains. There are several experimental methods for measuring the bending rigidity of vesicle membranes which lead to rather different results for the numerical value. Monte Carlo simulations of Evans' micropipette method show that the difference between the measured bending rigidity and the a priori chosen bending rigidity is small. The passage of fluid vesicles through narrow pores has some relevance to medical/pharmaceutical applications. In Monte Carlo simulations it is shown that a spontaneous transport of vesicles can be induced by a concentration gradient of osmotically active particles which corresponds to the physiological conditions. The necessary osmotic conditions and the charateristic time scales are calculated. For real experiments, penetration into the pore should occur within a few minutes. Moreover, it was observed that vesicles with a homogeneous positive spontaneous curvature can be deformed more easily into prolate shapes than vesicles with zero spontaneous curvature. This effect leads to a decrease of the energy barrier for the penetration into a wide pore, which has a radius slightly smaller than that of the vesicle. KW - Membran KW - Simulation KW - Vesikeln KW - Fluktuationen KW - Monte-Carlo-Simulationen KW - vesicles KW - fluctuations KW - Monte Carlo simulations Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5835 ER - TY - THES A1 - Kukula, Hildegard T1 - Lineare und verzweigte Blockcopolymere aus Polypeptiden und synthetischen Polymeren N2 - Die vorliegende Arbeit beschäftigt sich mit der Synthese und den Eigenschaften von linearen und verzweigten amphiphilen Polypeptid-Blockcopolymeren. Die Frage nach dem Einfluss der Topologie und Konformation der Blockcopolymere auf die supramolekularen und kolloidalen Eigenschaften bildete einen wichtigen Aspekt bei den Untersuchungen. Die Blockcopolymere wurden nach einem mehrstufigen Reaktionsschema durch Kombination von anionischer und ringöffnender Polymerisation von Aminosäuren-N-Carboxyanhydriden (NCA) synthetisiert. Die Untersuchung der Polypeptid-Blockcopolymere hinsichtlich ihres Aggregationsverhaltens in fester Phase sowie in verdünnter wässriger Lösung erfolgte mittels Streumethoden (SAXS, WAXS, DLS) sowie abbildender Methoden (TEM). Durch Einsatz der Blockcopolymere als polymere Stabilisatoren in der Emulsionspolymerisation wurden Oberflächen funktionalisierte Latizes erhalten. Als Beispiel für eine pharmazeutische Anwendung wurden bioverträgliche Polypeptid-Blockcopolymere als Wirkstoff-Trägersysteme in der Krebstherapie eingesetzt. N2 - This work describes the synthesis and characterization of linear and branched polypeptide block copolymers having amphiphilic character. The studies focused on the impact of the block copolymers' conformation and architecture on the supramolecular and colloidal properties. The polypeptide block copolymers were prepared in a multi-step process involving the anionic synthesis of (poly)amino-functional polymers (polystyrene and polybutadiene) which where used as macroinitiators for the ring-opening polymerization of N-carboxyanhydrides (NCA) of protected a-aminoacids. Supramolecular structures of the block copolymers in the solid state as well as in diluted aqueous solution were investigated using scattering (SAXS, WAXS, DLS) and microscopic (TEM) methods. Both linear and branched polypeptide block copolymers were used as polymeric stabilizers in the emulsion polymerization of styrene to yield polypeptide-decorated latexes. Biocompatible block copolymers were used as drug-delivery systems in lymphatic cancer therapy. KW - amphiphile Blockcopolymere KW - Polypeptide KW - N-Carboxyanhydrid KW - NCA KW - polymerer Stabilisator KW - Morphologie KW - Vesikel KW - amphiphilic block copolymer KW - polypeptide KW - N-carboxyanhydride KW - NCA KW - polymeric stabilizer KW - morphology KW - vesicles Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000040 ER - TY - THES A1 - Xie, Dongjiu T1 - Nanostructured Iron-based compounds as sulfur host material for lithium-sulfur batteries T1 - Nanostrukturierte Eisenverbindungen als Schwefel-Wirtsmaterial für Lithium-Schwefel-Batterien N2 - The present thesis focuses on the synthesis of nanostructured iron-based compounds by using β-FeOOH nanospindles and poly(ionic liquid)s (PILs) vesicles as hard and soft templates, respectively, to suppress the shuttle effect of lithium polysulfides (LiPSs) in Li-S batteries. Three types of composites with different nanostructures (mesoporous nanospindle, yolk-shell nanospindle, and nanocapsule) have been synthesized and applied as sulfur host material for Li-S batteries. Their interactions with LiPSs and effects on the electrochemical performance of Li-S batteries have been systematically studied. In the first part of the thesis, carbon-coated mesoporous Fe3O4 (C@M-Fe3O4) nanospindles have been synthesized to suppress the shuttle effect of LiPSs. First, β-FeOOH nanospindles have been synthesized via the hydrolysis of iron (III) chloride in aqueous solution and after silica coating and subsequent calcination, mesoporous Fe2O3 (M-Fe2O3) have been obtained inside the confined silica layer through pyrolysis of β-FeOOH. After the removal of the silica layer, electron tomography (ET) has been applied to rebuild the 3D structure of the M-Fe2O3 nanospindles. After coating a thin layer of polydopamine (PDA) as carbon source, the PDA-coated M-Fe2O3 particles have been calcinated to synthesize C@M-Fe3O4 nanospindles. With the chemisorption of Fe3O4 and confinement of mesoporous structure to anchor LiPSs, the composite C@M-Fe3O4/S electrode delivers a remaining capacity of 507.7 mAh g-1 at 1 C after 600 cycles. In the second part of the thesis, a series of iron-based compounds (Fe3O4, FeS2, and FeS) with the same yolk-shell nanospindle morphology have been synthesized, which allows for the direct comparison of the effects of compositions on the electrochemical performance of Li-S batteries. The Fe3O4-carbon yolk-shell nanospindles have been synthesized by using the β-FeOOH nanospindles as hard template. Afterwards, Fe3O4-carbon yolk-shell nanospindles have been used as precursors to obtain iron sulfides (FeS and FeS2)-carbon yolk-shell nanospindles through sulfidation at different temperatures. Using the three types of yolk-shell nanospindles as sulfur host, the effects of compositions on interactions with LiPSs and electrochemical performance in Li-S batteries have been systematically investigated and compared. Benefiting from the chemisorption and catalytic effect of FeS2 particles and the physical confinement of the carbon shell, the FeS2-C/S electrode exhibits the best electrochemical performance with an initial specific discharge capacity of 877.6 mAh g-1 at 0.5 C and a retention ratio of 86.7% after 350 cycles. In the third part, PILs vesicles have been used as soft template to synthesize carbon nanocapsules embedded with iron nitride particles to immobilize and catalyze LiPSs in Li-S batteries. First, 3-n-decyl-1-vinylimidazolium bromide has been used as monomer to synthesize PILs nanovesicles by free radical polymerization. Assisted by PDA coating route and ion exchange, PIL nanovesicles have been successfully applied as soft template in morphology-maintaining carbonization to prepare carbon nanocapsules embedded with iron nitride nanoparticles (FexN@C). The well-dispersed iron nitride nanoparticles effectively catalyze the conversion of LiPSs to Li2S, owing to their high electrical conductivity and strong chemical binding to LiPSs. The constructed FexN@C/S cathode demonstrates a high initial discharge capacity of 1085.0 mAh g-1 at 0.5 C with a remaining value of 930.0 mAh g-1 after 200 cycles. The results in the present thesis demonstrate the facile synthetic routes of nanostructured iron-based compounds with controllable morphologies and compositions using soft and hard colloidal templates, which can be applied as sulfur host to suppress the shuttle behavior of LiPSs. The synthesis approaches developed in this thesis are also applicable to fabricating other transition metal-based compounds with porous nanostructures for other applications. N2 - Die vorliegende Arbeit beschreibt die Synthese von nanostrukturierten Verbindungen auf Eisenbasis unter Verwendung von β-FeOOH-Nanospindeln und Vesikeln aus Poly(ionischen Flüssigkeiten) (PILs) als harte bzw. weiche Vorlagen, um den Shuttle-Effekt von Lithiumpolysulfiden (LiPSs) in Li-S-Batterien zu unterdrücken. Drei Arten von Verbundstoffen mit unterschiedlichen Nanostrukturen (mesoporöse Nanospindel, Dotterschalen-Nanospindel und Nanokapsel) wurden synthetisiert und als Schwefel-Wirtsmaterial für Li-S-Batterien eingesetzt. Ihre Wechselwirkungen mit LiPS und ihre Auswirkungen auf die elektrochemische Leistung von Li-S-Batterien wurden systematisch untersucht. Im ersten Teil der Arbeit wurden kohlenstoffbeschichtete mesoporöse Fe3O4 (C@M-Fe3O4) Nanospindeln synthetisiert, um den Shuttle-Effekt von LiPSs zu unterdrücken. Zunächst wurden β-FeOOH-Nanospindeln durch Hydrolyse von Eisen(III)-chlorid in wässriger Lösung synthetisiert. Nach der Beschichtung mit Siliziumdioxid und anschließender Kalzinierung wurde mesoporöses Fe2O3 (M-Fe2O3) innerhalb der begrenzten Siliziumdioxidschicht durch Pyrolyse von β-FeOOH erhalten. Nach der Entfernung der Siliziumdioxidschicht wurde Elektronentomographie (ET) eingesetzt, um die 3D-Struktur der M-Fe2O3-Nanospindeln zu rekonstruieren. Nach der Beschichtung mit einer dünnen Schicht Polydopamin (PDA) als Kohlenstoffquelle wurden die PDA-beschichteten M-Fe2O3-Partikel kalziniert, um C@M-Fe3O4-Nanospindeln zu synthetisieren. Durch die Chemisorption von Fe3O4 und die Einschließung der mesoporösen Struktur zur Verankerung der LiPSs liefert die zusammengesetzte C@M-Fe3O4/S-Elektrode nach 600 Zyklen eine Restkapazität von 507,7 mAh g-1 bei 1 C. Im zweiten Teil der Arbeit wurde eine Reihe von eisenbasierten Verbindungen (Fe3O4, FeS2, und FeS) mit der gleichen Dotterschalen-Nanospindel-Morphologie synthetisiert, was einen direkten Vergleich der Auswirkungen der Zusammensetzungen auf die elektrochemische Leistung von Li S-Batterien ermöglicht. Die Fe3O4-Kohlenstoff-Dotterschalen-Nanospindeln wurden unter Verwendung der β-FeOOH-Nanospindeln als harte Vorlage synthetisiert. Anschließend wurden Fe3O4-Kohlenstoff-Dotterschalen-Nanospindeln als Vorläufer verwendet, um Eisensulfide (FeS und FeS2) - Kohlenstoff-Dotterschalen-Nanospindeln durch Sulfidierung bei verschiedenen Temperaturen zu erhalten. Durch Verwendung der drei Arten von Dotterschalen-Nanospindeln als Schwefelwirt wurden die Auswirkungen der Zusammensetzungen auf die Wechselwirkungen mit LiPS und die elektrochemische Leistung in Li-S-Batterien systematisch untersucht und verglichen. Die FeS2-C/S-Elektrode, die von der Chemisorption und der katalytischen Wirkung der FeS2-Teilchen und dem physikalischen Einschluss der Kohlenstoffschale profitiert, zeigt die beste elektrochemische Leistung mit einer anfänglichen spezifischen Entladekapazität von 877,6 mAh g-1 bei 0,5 C und einem Kapazitätserhalt von 86,7 % nach 350 Zyklen. Im dritten Teil wurden PILs-Vesikel als weiche Vorlage verwendet, um Kohlenstoff-Nanokapseln zu synthetisieren, die mit Eisennitridpartikeln durchsetzt sind, um LiPSs in Li-S-Batterien zu immobilisieren und deren Umwandlung zu katalysieren. Zunächst wurde 3-n-Decyl-1-Vinylimidazoliumbromid als Monomer für die Synthese von PIL-Nanovesikeln durch radikalische Polymerisation verwendet. Mit Hilfe der PDA-Beschichtung und des Ionenaustauschs wurden die PIL-Nanomoleküle erfolgreich als weiche Vorlage bei der morphologieerhaltenden Karbonisierung eingesetzt, um Kohlenstoff-Nanokapseln mit eingebetteten Eisennitrid-Nanopartikeln (FexN@C) herzustellen. Die gut dispergierten Eisennitrid-Nanopartikel katalysieren die Umwandlung von LiPS in Li2S aufgrund ihrer hohen elektrischen Leitfähigkeit und starken chemischen Bindung an LiPS effektiv. Die konstruierte FexN@C/S-Kathode zeigt eine hohe anfängliche Entladekapazität von 1085,0 mAh g-1 bei 0,5 C mit einer verbleibenden Kapazität von 930,0 mAh g-1 nach 200 Zyklen. Die Ergebnisse dieser Arbeit zeigen, dass sich nanostrukturierte eisenbasierte Verbindungen mit kontrollierbarer Morphologie und Zusammensetzung leicht synthetisieren lassen, indem weiche und harte kolloidale Template verwendet werden, die als Schwefelwirt eingesetzt werden können, um das Shuttle-Verhalten von LiPS zu unterdrücken. Die in dieser Arbeit entwickelten Syntheseansätze sind auch für die Herstellung anderer Verbindungen auf Übergangsmetallbasis mit porösen Nanostrukturen für andere Anwendungen einsetzbar. KW - sulfur host KW - Schwefelwirt KW - Li-S batteries KW - Li-S-Batterien KW - iron-based compounds KW - Verbindungen auf Eisenbasis KW - nanospindles KW - Nanospindeln KW - vesicles KW - Vesikel KW - nanocapsules KW - Nanokapseln KW - poly(ionic liquid)s KW - poly(ionische Flüssigkeiten) KW - electron tomography KW - Elektronentomographie KW - cryo-electron microscopy KW - Kryo-Elektronenmikroskopie Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-610369 ER - TY - GEN A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Reinecke, Antje A1 - Koetz, Joachim T1 - “Green” gold nanotriangles: synthesis, purification by polyelectrolyte/micelle depletion flocculation and performance in surface-enhanced Raman scattering N2 - The aim of this study was to develop a one-step synthesis of gold nanotriangles (NTs) in the presence of mixed phospholipid vesicles followed by a separation process to isolate purified NTs. Negatively charged vesicles containing AOT and phospholipids, in the absence and presence of additional reducing agents (polyampholytes, polyanions or low molecular weight compounds), were used as a template phase to form anisotropic gold nanoparticles. Upon addition of the gold chloride solution, the nucleation process is initiated and both types of particles, i.e., isotropic spherical and anisotropic gold nanotriangles, are formed simultaneously. As it was not possible to produce monodisperse nanotriangles with such a one-step procedure, the anisotropic nanoparticles needed to be separated from the spherical ones. Therefore, a new type of separation procedure using combined polyelectrolyte/micelle depletion flocculation was successfully applied. As a result of the different purification steps, a green colored aqueous dispersion was obtained containing highly purified, well-defined negatively charged flat nanocrystals with a platelet thickness of 10 nm and an edge length of about 175 nm. The NTs produce promising results in surface-enhanced Raman scattering. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 317 KW - morphological transformation KW - halide-ions KW - nanoparticles KW - shape KW - size KW - nanoprisms KW - vesicles KW - nanorods KW - silver KW - poly(ethyleneimine) Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394430 SP - 33561 EP - 33568 ER -