TY - JOUR A1 - Nakoudi, Konstantina A1 - Ritter, Christoph A1 - Stachlewska, Iwona Sylwia T1 - Properties of cirrus clouds over the European Arctic (Ny-Alesund, Svalbard) JF - Remote sensing / Molecular Diversity Preservation International (MDPI) N2 - Cirrus is the only cloud type capable of inducing daytime cooling or heating at the top of the atmosphere (TOA) and the sign of its radiative effect highly depends on its optical depth. However, the investigation of its geometrical and optical properties over the Arctic is limited. In this work the long-term properties of cirrus clouds are explored for the first time over an Arctic site (Ny-Alesund, Svalbard) using lidar and radiosonde measurements from 2011 to 2020. The optical properties were quality assured, taking into account the effects of specular reflections and multiple-scattering. Cirrus clouds were generally associated with colder and calmer wind conditions compared to the 2011-2020 climatology. However, the dependence of cirrus properties on temperature and wind speed was not strong. Even though the seasonal cycle was not pronounced, the winter-time cirrus appeared under lower temperatures and stronger wind conditions. Moreover, in winter, geometrically- and optically-thicker cirrus were found and their ice particles tended to be more spherical. The majority of cirrus was associated with westerly flow and westerly cirrus tended to be geometrically-thicker. Overall, optically-thinner layers tended to comprise smaller and less spherical ice crystals, most likely due to reduced water vapor deposition on the particle surface. Compared to lower latitudes, the cirrus layers over Ny-Alesund were more absorbing in the visible spectral region and they consisted of more spherical ice particles. KW - Arctic clouds KW - cirrus clouds KW - ice clouds KW - lidar Y1 - 2021 U6 - https://doi.org/10.3390/rs13224555 SN - 2072-4292 VL - 13 IS - 22 PB - MDPI CY - Basel ER - TY - JOUR A1 - Dube, Jonas A1 - Böckmann, Christine A1 - Ritter, Christoph T1 - Lidar-Derived Aerosol Properties from Ny-Ålesund, Svalbard during the MOSAiC Spring 2020 JF - Remote sensing / Molecular Diversity Preservation International (MDPI) N2 - In this work, we present Raman lidar data (from a Nd:YAG operating at 355 nm, 532 nm and 1064 nm) from the international research village Ny-Alesund for the time period of January to April 2020 during the Arctic haze season of the MOSAiC winter. We present values of the aerosol backscatter, the lidar ratio and the backscatter Angstrom exponent, though the latter depends on wavelength. The aerosol polarization was generally below 2%, indicating mostly spherical particles. We observed that events with high backscatter and high lidar ratio did not coincide. In fact, the highest lidar ratios (LR > 75 sr at 532 nm) were already found by January and may have been caused by hygroscopic growth, rather than by advection of more continental aerosol. Further, we performed an inversion of the lidar data to retrieve a refractive index and a size distribution of the aerosol. Our results suggest that in the free troposphere (above approximate to 2500 m) the aerosol size distribution is quite constant in time, with dominance of small particles with a modal radius well below 100 nm. On the contrary, below approximate to 2000 m in altitude, we frequently found gradients in aerosol backscatter and even size distribution, sometimes in accordance with gradients of wind speed, humidity or elevated temperature inversions, as if the aerosol was strongly modified by vertical displacement in what we call the "mechanical boundary layer". Finally, we present an indication that additional meteorological soundings during MOSAiC campaign did not necessarily improve the fidelity of air backtrajectories. KW - aerosol KW - Arctic haze KW - lidar KW - microphysical properties KW - backtrajectories; KW - Ny-Alesund KW - Svalbard KW - MOSAiC KW - aerosol-boundary layer interactions Y1 - 2022 U6 - https://doi.org/10.3390/rs14112578 SN - 2072-4292 VL - 14 IS - 11 PB - MDPI CY - Basel ER - TY - JOUR A1 - Atmani, Farid A1 - Bookhagen, Bodo A1 - Smith, Taylor T1 - Measuring vegetation heights and their seasonal changes in the Western Namibian Savanna using spaceborne lidars JF - Remote sensing / Molecular Diversity Preservation International (MDPI) N2 - The Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) with its land and vegetation height data product (ATL08), and Global Ecosystem Dynamics Investigation (GEDI) with its terrain elevation and height metrics data product (GEDI Level 2A) missions have great potential to globally map ground and canopy heights. Canopy height is a key factor in estimating above-ground biomass and its seasonal changes; these satellite missions can also improve estimated above-ground carbon stocks. This study presents a novel Sparse Vegetation Detection Algorithm (SVDA) which uses ICESat-2 (ATL03, geolocated photons) data to map tree and vegetation heights in a sparsely vegetated savanna ecosystem. The SVDA consists of three main steps: First, noise photons are filtered using the signal confidence flag from ATL03 data and local point statistics. Second, we classify ground photons based on photon height percentiles. Third, tree and grass photons are classified based on the number of neighbors. We validated tree heights with field measurements (n = 55), finding a root-mean-square error (RMSE) of 1.82 m using SVDA, GEDI Level 2A (Geolocated Elevation and Height Metrics product): 1.33 m, and ATL08: 5.59 m. Our results indicate that the SVDA is effective in identifying canopy photons in savanna ecosystems, where ATL08 performs poorly. We further identify seasonal vegetation height changes with an emphasis on vegetation below 3 m; widespread height changes in this class from two wet-dry cycles show maximum seasonal changes of 1 m, possibly related to seasonal grass-height differences. Our study shows the difficulties of vegetation measurements in savanna ecosystems but provides the first estimates of seasonal biomass changes. KW - ICESat-2 KW - GEDI KW - canopy height KW - lidar KW - savanna Y1 - 2022 U6 - https://doi.org/10.3390/rs14122928 SN - 2072-4292 VL - 14 IS - 12 SP - 1 EP - 20 PB - MDPI CY - Basel, Schweiz ET - 12 ER - TY - JOUR A1 - Rheinwahlt, Aljoscha A1 - Goswami, Bedartha A1 - Bookhagen, Bodo T1 - A network-based flow accumulation algorithm for point clouds BT - Facet-Flow Networks (FFNs) JF - Journal of geophysical research : Earth surface N2 - Flow accumulation algorithms estimate the steady state of flow on real or modeled topographic surfaces and are crucial for hydrological and geomorphological assessments, including delineation of river networks, drainage basins, and sediment transport processes. Existing flow accumulation algorithms are typically designed to compute flows on regular grids and are not directly applicable to arbitrarily sampled topographic data such as lidar point clouds. In this study we present a random sampling scheme that generates homogeneous point densities, in combination with a novel flow path tracing approach-the Facet-Flow Network (FFN)-that estimates flow accumulation in terms of specific catchment area (SCA) on triangulated surfaces. The random sampling minimizes biases due to spatial sampling and the FFN allows for direct flow estimation from point clouds. We validate our approach on a Gaussian hill surface and study the convergence of its SCA compared to the analytical solution. Here, our algorithm outperforms the multiple flow direction algorithm, which is optimized for divergent surfaces. We also compute the SCA of a 6-km(2)-steep, vegetated catchment on Santa Cruz Island, California, based on airborne lidar point-cloud data. Point-cloud-based SCA values estimated by our method compare well with those estimated by the D-infinity or multiple flow direction algorithm on gridded data. The advantage of computing SCA from point clouds becomes relevant especially for divergent topography and for small drainage areas: These are depicted with much more detail due to the higher sampling density of point clouds. KW - point clouds KW - drainage networks KW - lidar KW - tin KW - surface runoff KW - spatial sampling Y1 - 2019 U6 - https://doi.org/10.1029/2018JF004827 SN - 2169-9003 SN - 2169-9011 VL - 124 IS - 7 SP - 2013 EP - 2033 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Grieve, Stuart W. D. A1 - Hales, Tristram C. A1 - Parker, Robert N. A1 - Mudd, Simon M. A1 - Clubb, Fiona J. T1 - Controls on Zero-Order Basin Morphology JF - Journal of geophysical research : Earth surface N2 - Zero-order basins are common features of soil-mantled landscapes, defined as unchanneled basins at the head of a drainage network. Their geometry and volume control how quickly sediment may reaccumulate after landslide evacuation and, more broadly, zero order basins govern the movement of water and sediment from hillslopes to the fluvial network. They also deliver water and sediment to the uppermost portions of the fluvial network. Despite this role as the moderator between hillslope and fluvial processes, little analysis on their morphology has been conducted at the landscape scale. We present a method to identify zero-order basins in landscapes and subsequently quantify their geometric properties using elliptical Fourier analysis. We deploy this method across the Coweeta Hydrologic Laboratory, USA. Properties such as length, relief, width, and concavity follow distinct probability distributions, which may serve as a basis for testing predictions of future landscape evolution models. Surprisingly, in a landscape with an orographic precipitation gradient and large hillslope to channel relief, we observe no correlation between elevation or spatial location and basin geometry. However, we find that two physiographic units in Coweeta have distinct zero-order basin morphologies. These are the steep, thin soiled, high-elevation Nantahala Escarpment and the lower-gradient, lower-elevation, thick soiled remainder of the basin. Our results indicate that basin slope and area negatively covary, producing the distinct forms observed between the two physiographic units, which we suggest arise through competition between spatially variable soil creep and stochastic landsliding. KW - zero-order basin KW - landslide KW - hillslope geomorphology KW - landscape evolution modeling KW - lidar KW - hillslope sediment transport Y1 - 2018 U6 - https://doi.org/10.1029/2017JF004453 SN - 2169-9003 SN - 2169-9011 VL - 123 IS - 12 SP - 3269 EP - 3291 PB - American Geophysical Union CY - Washington ER - TY - JOUR A1 - Ritter, Christoph A1 - Ángeles Burgos, María A1 - Böckmann, Christine A1 - Mateos, David A1 - Lisok, Justyna A1 - Markowicz, Krzysztof M. A1 - Moroni, Beatrice A1 - Cappelletti, David A1 - Udisti, Roberto A1 - Maturilli, Marion A1 - Neuber, Roland T1 - Microphysical properties and radiative impact of an intense biomass burning aerosol event measured over Ny-angstrom lesund, Spitsbergen in July 2015 JF - Tellus - Series B, Chemical and Physical Meteorology N2 - In this work, an evaluation of an intense biomass burning event observed over Ny-angstrom lesund (Spitsbergen, European Arctic) in July 2015 is presented. Data from the multi-wavelengths Raman-lidar KARL, a sun photometer and radiosonde measurements are used to derive some microphysical properties of the biomass burning aerosol as size distribution, refractive index and single scattering albedo at different relative humidities. Predominantly particles in the accumulation mode have been found with a bi-modal distribution and dominance of the smaller mode. Above 80% relative humidity, hygroscopic growth in terms of an increase of particle diameter and a slight decrease of the index of refraction (real and imaginary part) has been found. Values of the single scattering albedo around 0.9 both at 355nm and 532nm indicate some absorption by the aerosol. Values of the lidar ratio are around 26sr for 355nm and around 50sr for 532nm, almost independent of the relative humidity. Further, data from the photometer and surface radiation values from the local baseline surface radiation network (BSRN) have been applied to derive the radiative impact of the biomass burning event purely from observational data by comparison with a clear background day. We found a strong cooling for the visible radiation and a slight warming in the infra-red. The net aerosol forcing, derived by comparison with a clear background day purely from observational data, obtained a value of -95 W/m(2) per unit AOD500. KW - aerosol KW - lidar KW - retrieval of aerosol properties KW - radiative forcing KW - Arctic aerosol Y1 - 2018 U6 - https://doi.org/10.1080/16000889.2018.1539618 SN - 1600-0889 VL - 70 PB - Routledge, Taylor & Francis Group CY - Abingdon ER -