TY - JOUR A1 - Hentrich, Doreen A1 - Taabache, Soraya A1 - Brezesinski, Gerald A1 - Lange, Nele A1 - Unger, Wolfgang A1 - Kuebel, Christian A1 - Bertin, Annabelle A1 - Taubert, Andreas T1 - A Dendritic Amphiphile for Efficient Control of Biomimetic Calcium Phosphate Mineralization JF - Macromolecular bioscience N2 - The phase behavior of a dendritic amphiphile containing a Newkome-type dendron as the hydrophilic moiety and a cholesterol unit as the hydrophobic segment is investigated at the air-liquid interface. The amphiphile forms stable monomolecular films at the airliquid interface on different subphases. Furthermore, the mineralization of calcium phosphate beneath the monolayer at different calcium and phosphate concentrations versus mineralization time shows that at low calcium and phosphate concentrations needles form, whereas flakes and spheres dominate at higher concentrations. Energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and electron diffraction confirm the formation of calcium phosphate. High-resolution transmission electron microscopy and electron diffraction confirm the predominant formation of octacalcium phosphate and hydroxyapatite. The data also indicate that the final products form via a complex multistep reaction, including an association step, where nano-needles aggregate into larger flake-like objects. Y1 - 2017 U6 - https://doi.org/10.1002/mabi.201600524 SN - 1616-5187 SN - 1616-5195 VL - 17 SP - 2541 EP - 2548 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Hentrich, Doreen A1 - Brezesinski, Gerald A1 - Kuebel, Christian A1 - Bruns, Michael A1 - Taubert, Andreas T1 - Cholesteryl Hemisuccinate Monolayers Efficiently Control Calcium Phosphate Nucleation and Growth JF - Crystal growth & design : integrating the fields of crystal engineering and crystal growth for the synthesis and applications of new materials N2 - The article describes the phase behavior of cholesteryl hemisuccinate at the air-liquid interface and its effect on calcium phosphate (CP) mineralization. The amphiphile forms stable monolayers with phase transitions at the air-liquid interface from a gas to a tilted liquid-condensed (TLC) and finally to an untilted liquid-condensed (ULC) phase. CP mineralization beneath these monolayers leads to crumpled CP layers made from individual plates. The main crystal phase is octacalcium phosphate (OCP) along with a minor fraction of hydroxyapatite (HAP), as confirmed by X-ray photoelectron spectroscopy, energy dispersive X-ray spectroscopy, bright field transmission electron microscopy, and electron diffraction. Y1 - 2017 U6 - https://doi.org/10.1021/acs.cgd.7b00753 SN - 1528-7483 SN - 1528-7505 VL - 17 SP - 5764 EP - 5774 PB - American Chemical Society CY - Washington ER - TY - GEN A1 - Hentrich, Doreen A1 - Tauer, Klaus A1 - Espanol, Montserrat A1 - Ginebra, Maria-Pau A1 - Taubert, Andreas T1 - EDTA and NTA effectively tune the mineralization of calcium phosphate from bulk aqueous solution T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - This study describes the effects of nitrilotriacetic acid (NTA) and ethylenediaminotetraacetic acid (EDTA) on themineralization of calciumphosphate from bulk aqueous solution. Mineralization was performed between pH 6 and 9 and with NTA or EDTA concentrations of 0, 5, 10, and 15 mM. X-ray diffraction and infrared spectroscopy show that at low pH, mainly brushite precipitates and at higher pH, mostly hydroxyapatite forms. Both additives alter the morphology of the precipitates. Without additive, brushite precipitates as large plates. With NTA, the morphology changes to an unusual rod-like shape. With EDTA, the edges of the particles are rounded and disk-like particles form. Conductivity and pH measurements suggest that the final products form through several intermediate steps. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1095 KW - biomineralization KW - biomimetic mineralization KW - calcium phosphate KW - NTA KW - EDTA KW - precipitation KW - brushite KW - hydroxyapatite Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-469186 SN - 1866-8372 IS - 1095 ER - TY - JOUR A1 - Hentrich, Doreen A1 - Tauer, Klaus A1 - Espanol, Montserrat A1 - Ginebra, Maria-Pau A1 - Taubert, Andreas T1 - EDTA and NTA effectively tune the mineralization of calcium phosphate from bulk aqueous solution JF - Biomimetics N2 - This study describes the effects of nitrilotriacetic acid (NTA) and ethylenediaminotetraacetic acid (EDTA) on themineralization of calciumphosphate from bulk aqueous solution. Mineralization was performed between pH 6 and 9 and with NTA or EDTA concentrations of 0, 5, 10, and 15 mM. X-ray diffraction and infrared spectroscopy show that at low pH, mainly brushite precipitates and at higher pH, mostly hydroxyapatite forms. Both additives alter the morphology of the precipitates. Without additive, brushite precipitates as large plates. With NTA, the morphology changes to an unusual rod-like shape. With EDTA, the edges of the particles are rounded and disk-like particles form. Conductivity and pH measurements suggest that the final products form through several intermediate steps. KW - biomineralization KW - biomimetic mineralization KW - calcium phosphate KW - NTA KW - EDTA KW - precipitation KW - brushite KW - hydroxyapatite Y1 - 2017 U6 - https://doi.org/10.3390/biomimetics2040024 SN - 2313-7673 VL - 2 IS - 4 PB - MDPI CY - Basel ER - TY - THES A1 - Hentrich, Doreen T1 - Grenzflächen-kontrollierte Mineralisation von Calciumphosphat T1 - Interface-controlled mineralization of calcium phosphate N2 - In der vorliegenden Arbeit konnte gezeigt werden, dass die beiden verwendeten Amphiphile mit Cholesterol als hydrophoben Block, gute Template für die Mineralisation von Calciumphosphat an der Wasser/Luft-Grenzfläche sind. Mittels Infrarot-Reflexions-Absorptions-Spektroskopie (IRRAS), Röntgenphotoelektronenspektroskopie (XPS), Energie dispersiver Röntgenspektroskopie (EDXS), Elektronenbeugung (SAED) und hochauflösende Transmissionselektronenmikroskopie (HRTEM) konnte die erfolgreiche Mineralisation von Calciumphosphat für beide Amphiphile an der Wasser/Luft-Grenzfläche nachgewiesen werden. Es konnte auch gezeigt werden, dass das Phasenverhalten der beiden Amphiphile und die bei der Mineralisation von Calciumphosphat gebildeten Kristallphasen nicht identisch sind. Beide Amphiphile üben demnach einen unterschiedlichen Einfluss auf den Mineralisationsverlauf aus. Beim CHOL-HEM konnte sowohl nach 3 h als auch nach 5 h Octacalciumphosphat (OCP) als einzige Kristallphase mittels XPS, SAED, HRTEM und EDXS nachgewiesen werden. Das A-CHOL hingegen zeigte bei der Mineralisation von Calciumphosphat nach 1 h zunächst eine nicht eindeutig identifizierbare Vorläuferphase aus amorphen Calciumphosphat, Brushit (DCPD) oder OCP. Diese wandelte sich dann nach 3 h und 5 h in ein Gemisch, bestehend aus OCP und ein wenig Hydroxylapatit (HAP) um. Die Schlussfolgerung daraus ist, dass das CHOL-HEM in der Lage ist, dass während der Mineralisation entstandene OCP zu stabilisieren. Dies geschieht vermutlich durch die Adsorption des Amphiphils bevorzugt an der OCP Oberfläche in [100] Orientierung. Dadurch wird die Spaltung entlang der c-Achse unterdrückt und die Hydrolyse zum HAP verhindert. Das A-CHOL ist hingegen sterisch anspruchsvoller und kann wahrscheinlich aufgrund seiner Größe nicht so gut an der OCP Kristalloberfläche adsorbieren verglichen zum CHOL HEM. Das CHOL-HEM kann also die Hydrolyse von OCP zu HAP besser unterdrücken als das A-CHOL. Da jedoch auch beim A-CHOL nach einer Mineralisationszeit von 5 h nur wenig HAP zu finden ist, wäre auch hier ein Stabilisierungseffekt der OCP Kristalle möglich. Um eine genaue Aussage darüber treffen zu können, sind jedoch zusätzliche Kontrollexperimente notwendig. Es wäre zum einen denkbar, die Mineralisationsexperimente über einen längeren Zeitraum durchzuführen. Diese könnten zeigen, ob das CHOL-HEM die Hydrolyse vom OCP zum HAP komplett unterdrückt. Außerdem könnte nachgewiesen werden, ob beim A-CHOL das OCP weiter zum HAP umgesetzt wird oder ob ein Gemisch beider Kristallphasen erhalten bleibt. Um die Mineralisation an der Wasser/Luft-Grenzfläche mit der Mineralisation in Bulklösung zu vergleichen, wurden zusätzlich Mineralisationsexperimente in Bulklösung durchgeführt. Dazu wurden Nitrilotriessigsäure (NTA) und Ethylendiamintetraessigsäure (EDTA) als Mineralisationsadditive verwendet, da NTA unter anderem der Struktur der hydrophilen Kopfgruppe des A-CHOLs ähnelt. Es konnte gezeigt werden, dass ein Vergleich der Mineralisation an der Grenzfläche mit der Mineralisation in Bulklösung nicht ohne weiteres möglich ist. Bei der Mineralisation in Bulklösung wird bei tiefen pH-Werten DCPD und bei höheren pH-Werten HAP gebildet. Diese wurde mittels Röntgenpulverdiffraktometrie Messungen nachgewiesen und durch Infrarotspektroskopie bekräftigt. Die Bildung von OCP wie an der Wasser/Luft-Grenzfläche konnte nicht beobachtet werden. Es konnte auch gezeigt werden, dass beide Additive NTA und EDTA einen unterschiedlichen Einfluss auf den Verlauf der Mineralisation nehmen. So unterscheiden sich zum einen die Morphologien des gebildeten DCPDs und zum anderen wurde beispielsweise in Anwesenheit von 10 und 15 mM NTA neben DCPD auch HAP bei einem Ausgangs-pH-Wert von 7 nachgewiesen. Da unser Augenmerk speziell auf der Mineralisation von Calciumphosphat an der Wasser/Luft-Grenzfläche liegt, könnten Folgeexperimente wie beispielsweise GIXD Messungen durchgeführt werden. Dadurch wäre es möglich, einen Überblick über die gebildeten Kristallphasen nach unterschiedlichen Reaktionszeiten direkt auf dem Trog zu erhalten. Es konnte weiterhin gezeigt werden, dass auch einfache Amphiphile in der Lage sind, die Mineralisation von Calciumphosphat zu steuern. Amphiphile mit Cholesterol als hydrophoben Block bilden offensichtlich besonders stabile Monolagen an der Wasser/Luft-Grenzfläche. Eine Untersuchung des Einflusses ähnlicher Amphiphile mit unterschiedlichen hydrophilen Kopfgruppen auf das Mineralisationsverhalten von Calciumphosphat wäre durchaus interessant. N2 - In the current thesis two amphiphiles were used as templates for the mineralization of calcium phosphate at the air-water interface. Both amphiphiles have a cholesteryl group as hydrophobic block and only differ in their hydrophilic unit. The amphiphile CHOL-HEM has one carboxylic acid as the hydrophilic unit and the amphiphile A-CHOL contains a Newkome type dendron as hydrophilic block. The successful mineralization of calcium phosphate at the air-water interface could be prove by infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, selected area electron diffraction and high resolution transmission electron microscopy. Furthermore, the study shows that the two amphiphiles have a different influence on the mineralization leading to different calcium phosphate phases. The crystal phase formed in case of the CHOL-HEM is octacalcium phosphate (OCP). For the A-CHOL a precursor phase after 1 h mineralization time was formed which could not be identified clearly. The precursor phase could be amorphous calcium phosphate, dicalcium hydrogen phosphate dihydrate (DCPD) or OCP. This phase transformed into a mixture of OCP and a small amount of hydroxyapatite (HAP). In conclusion, it can be demonstrated that the CHOL-HEM is able to stabilize the OCP. This could happen by the adsorption of the amphiphile at the OCP crystal surface in [100] direction and therefore the splitting along the c-axis is hampered and the hydrolysis into HAP will be prevented. The hydrophilic block of the A-CHOL is much bigger and sterically more demanding. For that reason, the A-CHOL cannot adsorb at the OCP crystal surface as good as the CHOL-HEM. The CHOL-HEM can prevent the hydrolysis from OCP into HAP much more efficiently. Due to the fact, that after 5 h mineralization time using A-CHOL as template just a small amount of HAP could be identified suggests that also this amphiphile shows a stabilizing effect on the OCP crystals. To prove this, additional control experiments would be necessary. The A-CHOL shows a better control in terms of the orientation of the mineralized crystals, which could be mostly identified as OCP crystals in [110] and HAP crystals in [-110] orientation. For the CHOL-HEM no preferred orientation could be determined for the formed OCP crystals. Additional mineralization experiments in bulk solution using ethylenediaminetetraacetic acid disodium salt dihydrate (EDTA) and nitrilotriacetic acid (NTA) as mineralization additives were performed. The structure of the NTA is similar to the hydrophilic unit of the A-CHOL. The study shows that the comparison of the mineralization at the air-water interface with the mineralization in bulk solution is not easily possible. For the mineralization in bulk solution at low pH values DCPD and at high pH values HAP is formed. These two phases could be identified using X-ray powder diffraction and infrared spectroscopy. The formation of OCP like for the mineralization at the air-water interface could not be observed. Both additives, EDTA and NTA show a different influence on the mineralization progress and show for example different morphologies of the precipitated DCPD. KW - Calciumphosphat KW - Mineralisation KW - Wasser-Luft-Grenzfläche KW - calcium phosphate KW - mineralization KW - air-water interface Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-398236 ER - TY - JOUR A1 - Hentrich, Doreen A1 - Junginger, Mathias A1 - Bruns, Michael A1 - Börner, Hans Gerhard A1 - Brandt, Jessica A1 - Brezesinski, Gerald A1 - Taubert, Andreas T1 - Interface-controlled calcium phosphate mineralization BT - effect of oligo(aspartic acid)-rich interfaces JF - CrystEngComm N2 - The phase behavior of an amphiphilic block copolymer based on a poly(aspartic acid) hydrophilic block and a poly(n-butyl acrylate) hydrophobic block was investigated at the air–water and air–buffer interface. The polymer forms stable monomolecular films on both subphases. At low pH, the isotherms exhibit a plateau. Compression–expansion experiments and infrared reflection absorption spectroscopy suggest that the plateau is likely due to the formation of polymer bi- or multilayers. At high pH the films remain intact upon compression and no multilayer formation is observed. Furthermore, the mineralization of calcium phosphate beneath the monolayer was studied at different pH. The pH of the subphase and thus the polymer charge strongly affects the phase behavior of the film and the mineral formation. After 4 h of mineralization at low pH, atomic force microscopy shows smooth mineral films with a low roughness. With increasing pH the mineral films become inhomogeneous and the roughness increases. Transmission electron microscopy confirms this: at low pH a few small but uniform particles form whereas particles grown at higher pH are larger and highly agglomerated. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirm the formation of calcium phosphate. The levels of mineralization are higher in samples grown at high pH. Y1 - 2015 U6 - https://doi.org/10.1039/C4CE02274B SN - 1466-8033 IS - 17 SP - 6901 EP - 6913 PB - Royal Society of Chemistry CY - London ER - TY - GEN A1 - Hentrich, Doreen A1 - Junginger, Mathias A1 - Bruns, Michael A1 - Börner, Hans Gerhard A1 - Brandt, Jessica A1 - Brezesinski, Gerald A1 - Taubert, Andreas T1 - Interface-controlled calcium phosphate mineralization BT - effect of oligo(aspartic acid)-rich interfaces N2 - The phase behavior of an amphiphilic block copolymer based on a poly(aspartic acid) hydrophilic block and a poly(n-butyl acrylate) hydrophobic block was investigated at the air–water and air–buffer interface. The polymer forms stable monomolecular films on both subphases. At low pH, the isotherms exhibit a plateau. Compression–expansion experiments and infrared reflection absorption spectroscopy suggest that the plateau is likely due to the formation of polymer bi- or multilayers. At high pH the films remain intact upon compression and no multilayer formation is observed. Furthermore, the mineralization of calcium phosphate beneath the monolayer was studied at different pH. The pH of the subphase and thus the polymer charge strongly affects the phase behavior of the film and the mineral formation. After 4 h of mineralization at low pH, atomic force microscopy shows smooth mineral films with a low roughness. With increasing pH the mineral films become inhomogeneous and the roughness increases. Transmission electron microscopy confirms this: at low pH a few small but uniform particles form whereas particles grown at higher pH are larger and highly agglomerated. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirm the formation of calcium phosphate. The levels of mineralization are higher in samples grown at high pH. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 213 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-89540 SP - 6901 EP - 6913 ER - TY - JOUR A1 - Hentrich, Doreen A1 - Junginger, Mathias A1 - Bruns, Michael A1 - Boerner, Hans G. A1 - Brandt, Jessica A1 - Brezesinski, Gerald A1 - Taubert, Andreas T1 - Interface-controlled calcium phosphate mineralization: effect of oligo(aspartic acid)-rich interfaces JF - CrystEngComm N2 - The phase behavior of an amphiphilic block copolymer based on a poly(aspartic acid) hydrophilic block and a poly(n-butyl acrylate) hydrophobic block was investigated at the air-water and air-buffer interface. The polymer forms stable monomolecular films on both subphases. At low pH, the isotherms exhibit a plateau. Compression-expansion experiments and infrared reflection absorption spectroscopy suggest that the plateau is likely due to the formation of polymer bi- or multilayers. At high pH the films remain intact upon compression and no multilayer formation is observed. Furthermore, the mineralization of calcium phosphate beneath the monolayer was studied at different pH. The pH of the subphase and thus the polymer charge strongly affects the phase behavior of the film and the mineral formation. After 4 h of mineralization at low pH, atomic force microscopy shows smooth mineral films with a low roughness. With increasing pH the mineral films become inhomogeneous and the roughness increases. Transmission electron microscopy confirms this: at low pH a few small but uniform particles form whereas particles grown at higher pH are larger and highly agglomerated. Energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirm the formation of calcium phosphate. The levels of mineralization are higher in samples grown at high pH. Y1 - 2015 U6 - https://doi.org/10.1039/c4ce02274b SN - 1466-8033 VL - 17 IS - 36 SP - 6901 EP - 6913 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 354 KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400453 ER - TY - JOUR A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-Soluble Cellulose Derivatives Are Sustainable Additives for Biomimetic Calcium Phosphate Mineralization JF - Inorganics : open access journal N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2016 U6 - https://doi.org/10.3390/inorganics4040033 SN - 2304-6740 VL - 4 PB - MDPI CY - Basel ER -