@phdthesis{Nguyen2019,
  author    = {Nguyen, Quyet Doan},
  title     = {Electro-acoustical probing of space-charge and dipole-polarization profiles in polymer dielectrics for electret and electrical-insulation applications},
  doi       = {10.25932/publishup-44562},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-445629},
  school      = {Universit{\"a}t Potsdam},
  pages     = {105},
  year      = {2019},
  abstract  = {Electrets are dielectrics with quasi-permanent electric charge and/or dipoles, sometimes can be regarded as an electric analogy to a magnet. Since the discovery of the excellent charge retention capacity of poly(tetrafluoro ethylene) and the invention of the electret microphone, electrets have grown out of a scientific curiosity to an important application both in science and technology. The history of electret research goes hand in hand with the quest for new materials with better capacity at charge and/or dipole retention. To be useful, electrets normally have to be charged/poled to render them electro-active. This process involves electric-charge deposition and/or electric dipole orientation within the dielectrics ` surfaces and bulk. Knowledge of the spatial distribution of electric charge and/or dipole polarization after their deposition and subsequent decay is crucial in the task to improve their stability in the dielectrics. Likewise, for dielectrics used in electrical insulation applications, there are also needs for accumulated space-charge and polarization spatial profiling. Traditionally, space-charge accumulation and large dipole polarization within insulating dielectrics is considered undesirable and harmful to the insulating dielectrics as they might cause dielectric loss and could lead to internal electric field distortion and local field enhancement. High local electric field could trigger several aging processes and reduce the insulating dielectrics' lifetime. However, with the advent of high-voltage DC transmission and high-voltage capacitor for energy storage, these are no longer the case. There are some overlapped between the two fields of electrets and electric insulation. While quasi-permanently trapped electric-charge and/or large remanent dipole polarization are the requisites for electret operation, stably trapped electric charge in electric insulation helps reduce electric charge transport and overall reduced electric conductivity. Controlled charge trapping can help in preventing further charge injection and accumulation as well as serving as field grading purpose in insulating dielectrics whereas large dipole polarization can be utilized in energy storage applications. In this thesis, the Piezoelectrically-generated Pressure Steps (PPSs) were employed as a nondestructive method to probe the electric-charge and dipole polarization distribution in a range of thin film (several hundred micron) polymer-based materials, namely polypropylene (PP), low-density polyethylene/magnesium oxide (LDPE/MgO) nanocomposites and poly(vinylidene fluoride-co- trifluoro ethylene) (P(VDF-TrFE)) copolymer. PP film surface-treated with phosphoric acid to introduce surfacial isolated nanostructures serves as example of 2-dimensional nano-composites whereas LDPE/MgO serves as the case of 3-dimensional nano-composites with MgO nano-particles dispersed in LDPE polymer matrix. It is evidenced that the nanoparticles on the surface of acid-treated PP and in the bulk of LDPE/MgO nanocomposites improve charge trapping capacity of the respective material and prevent further charge injection and transport and that the enhanced charge trapping capacity makes PP and LDPE/MgO nanocomposites potential materials for both electret and electrical insulation applications. As for PVDF and VDF-based copolymers, the remanent spatial polarization distribution depends critically on poling method as well as specific parameters used in the respective poling method. In this work, homogeneous polarization poling of P(VDF-TrFE) copolymers with different VDF-contents have been attempted with hysteresis cyclical poling. The behaviour of remanent polarization growth and spatial polarization distribution are reported and discussed. The Piezoelectrically-generated Pressure Steps (PPSs) method has proven as a powerful method for the charge storage and transport characterization of a wide range of polymer material from nonpolar, to polar, to polymer nanocomposites category.},
  language  = {en}
}
@phdthesis{Sborikas2015,
  author    = {Sborikas, Martynas},
  title     = {Preparation and characterization of acoustic electret and electromechanical properties of polypropylene ferroelectrets},
  pages     = {129},
  year      = {2015},
  language  = {en}
}
@phdthesis{RamanVenkatesan2022,
  author    = {Raman Venkatesan, Thulasinath},
  title     = {Tailoring applications-relevant properties in poly(vinylidene fluoride)-based homo-, co- and ter-polymers through modification of their three-phase structure},
  doi       = {10.25932/publishup-54966},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-549667},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xx, 218},
  year      = {2022},
  abstract  = {Poly(vinylidene fluoride) (PVDF)-based homo-, co- and ter-polymers are well-known for their ferroelectric and relaxor-ferroelectric properties. Their semi-crystalline morphology consists of crystalline and amorphous phases, plus interface regions in between, and governs the relevant electro-active properties. In this work, the influence of chemical, thermal and mechanical treatments on the structure and morphology of PVDF-based polymers and on the related ferroelectric/relaxor-ferroelectric properties is investigated. Polymer films were prepared in different ways and subjected to various treatments such as annealing, quenching and stretching. The resulting changes in the transitions and relaxations of the polymer samples were studied by means of dielectric, thermal, mechanical and optical techniques. In particular, the origin(s) behind the mysterious mid-temperature transition (T_{mid}) that is observed in all PVDF-based polymers was assessed. A new hypothesis is proposed to describe the T_{mid} transition as a result of multiple processes taking place within the temperature range of the transition. The contribution of the individual processes to the observed overall transition depends on both the chemical structure of the monomer units and the processing conditions which also affect the melting transition. Quenching results in a decrease of the overall crystallinity and in smaller crystallites. On samples quenched after annealing, notable differences in the fractions of different crystalline phases have been observed when compared to samples that had been slowly cooled. Stretching of poly(vinylidene fluoride-tetrafluoroethylene) (P(VDF-TFE)) films causes an increase in the fraction of the ferroelectric β-phase with simultaneous increments in the melting point (T_m) and the crystallinity (\chi_c) of the copolymer. While an increase in the stretching temperature does not have a profound effect on the amount of the ferroelectric phase, its stability appears to improve. Measurements of the non-linear dielectric permittivity \varepsilon_2^\prime in a poly(vinylidenefluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE- CFE)) relaxor-ferroelectric (R-F) terpolymer reveal peaks at 30 and 80 °C that cannot be identified in conventional dielectric spectroscopy. The former peak is associated with T_{mid}\ and may help to understand the non-zero \varepsilon_2^\prime values that are found for the paraelectric terpolymer phase. The latter peak can also be observed during cooling of P(VDF-TrFE) copolymer samples at 100 °C and is due to conduction processes and space-charge polarization as a result of the accumulation of real charges at the electrode-sample interface. Annealing lowers the Curie-transition temperature of the terpolymer as a consequence of its smaller ferroelectric-phase fraction, which by default exists even in terpolymers with relatively high CFE content. Changes in the transition temperatures are in turn related to the behavior of the hysteresis curves observed on differently heat-treated samples. Upon heating, the hysteresis curves evolve from those known for a ferroelectric to those of a typical relaxor-ferroelectric material. Comparing dielectric-hysteresis loops obtained at various temperatures, we find that annealed terpolymer films show higher electric-displacement values and lower coercive fields than the non-annealed samples - irrespective of the measurement temperature - and also exhibit ideal relaxor-ferroelectric behavior at ambient temperatures, which makes them excellent candidates for related applications at or near room temperature. However, non-annealed films - by virtue of their higher ferroelectric activity - show a larger and more stable remanent polarization at room temperature, while annealed samples need to be poled below 0 °C to induce a well-defined polarization. Overall, by modifying the three phases in PVDF-based polymers, it has been demonstrated how the preparation steps and processing conditions can be tailored to achieve the desired properties that are optimal for specific applications.},
  language  = {en}
}
@phdthesis{Kornhuber2017,
  author    = {Kornhuber, Kai},
  title     = {Rossby wave dynamics and changes in summertime weather extremes},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xii, 222},
  year      = {2017},
  abstract  = {Extreme weather events like heatwaves and floods severely affect societies with impacts ranging from economic damages to losses in human lifes. Global warming caused by anthropogenic greenhouse gas emissions is expected to increase their frequency and intensity, particularly in the warm season. Next to these thermodynamic changes, climate change might also impact the large scale atmospheric circulation.Such dynamic changes might additionally act on the occurence of extreme weather events, but involved mechanisms are often highly non-linear. Therefore, large uncertainty exists on the exact nature of these changes and the related risks to society. Particularly in the densely populated mid-latitudes weather patterns are governed by the large scale circulation like the jet-streams and storm tracks. Extreme weather in this region is often related to persistent weather systems associated with a strongly meandering jet-stream. Such meanders are called Rossby waves. Under specific conditions they can become slow moving, stretched around the entire hemisphere and generate simultaneaous heat- and rainfall extremes in far-away regions. This thesis aims at enhancing the understanding of synoptic-scale, circumglobal Rossby waves and the associated risks of dynamical changes to society. More specific, the analyses investigate their relation to extreme weather, regions at risk, under which conditions they are generated, and the influence of anthropogenic climate change on those conditions now, in the past and in the future. I find that circumglobal Rossby waves promoted simultaneous occuring weather extremes across the northern hemisphere in several recent summers. Further, I present evidence that they are often linked to quasiresonant-amplification of planetary waves. These events include the 2003 European heatwave and the Moscow heatwave of 2010. This non-linear mechanism acts on the upper level flow through trapping and amplification of stationary synoptic scale waves. I show that this resonance mechanism acts in both hemispheres and is related to extreme weather. A main finding is that circumglobal Rossby waves primarily occur as two specific teleconnection patterns associated with a wave 5 and wave 7 pattern in the northern hemisphere, likely due to the favourable longitudinal distance of prominent mountain ridges here. Furthermore, I identify those regions which are particularly at risk: The central United States, western Europe and the Ukraine/Russian region. Moreover, I present evidence that the wave 7 pattern has and extreme weather in these regions. My results suggest that the increase in frequency can be linked to favourable changes in large scale temperature gradients, which I show to be largely underestimated by model simulations. Using surface temperature fingerprint as proxy for investigating historic and future model ensembles, evidence is presented that anthropogenic warming has likely increased the probability for the occurence of circumglobal Rossby waves. Further it is shown that this might lead to a doubling of such events until the end of the century under a high-emission scenario. Overall, this thesis establishes several atmosphere-dynamical pathways by which changes in large scale temperature gradients might link to persistent boreal summer weather. It highlights the societal risks associated with the increasing occurence of a newly discovered Rossby wave teleconnection pattern, which has the potential to cause simultaneaous heat-extremes in the mid-latitudinal bread-basket regions. In addition, it provides further evidence that the traditional picture by which quasi-stationary Rossby waves occur only in the low wavenumber regime, should be reconsidered.},
  language  = {en}
}
@phdthesis{Graetz2020,
  author    = {Gr{\"a}tz, Fabio M.},
  title     = {Nonlinear diffusion in granular gases and dense planetary rings},
  school      = {Universit{\"a}t Potsdam},
  pages     = {101},
  year      = {2020},
  abstract  = {Small moonlets or moons embedded in dense planetary rings create S-shaped density modulations called propellers if their masses are smaller than a certain threshold, alternatively they create a circumferential gap in the disk if the embedded body's mass exceeds this threshold (Spahn and Sremčević, 2000). The gravitational perturber scatters the ring particles, depletes the disk's density, and, thus, clears a gap, whereas counteracting viscous diffusion of the ring material has the tendency to close the created gap, thereby forming a propeller. Propeller objects were predicted by Spahn and Sremčević (2000) and Sremčević et al. (2002) and were later discovered by the Cassini space probe (Tiscareno et al., 2006, Sremčević et al., 2007, Tiscareno et al., 2008, and Tiscareno et al., 2010). The ring moons Pan and Daphnis are massive enough to maintain the circumferential Encke and Keeler gaps in Saturn's A ring and were detected by Showalter (1991) and Porco (2005) in Voyager and Cassini images, respectively. In this thesis, a nonlinear axisymmetric diffusion model is developed to describe radial density profiles of circumferential gaps in planetary rings created by embedded moons (Grätz et al., 2018). The model accounts for the gravitational scattering of the ring particles by the embedded moon and for the counteracting viscous diffusion of the ring matter back into the gap. With test particle simulations it is shown that the scattering of the ring particles passing the moon is larger for small impact parameters than estimated by Goldreich and Tremaine (1980). This is especially significant for the modeling of the Keeler gap. The model is applied to the Encke and Keeler gaps with the aim to estimate the shear viscosity of the ring in their vicinities. In addition, the model is used to analyze whether tiny icy moons whose dimensions lie below Cassini's resolution capabilities would be able to cause the poorly understood gap structure of the C ring and the Cassini Division. One of the most intriguing facets of Saturn's rings are the extremely sharp edges of the Encke and Keeler gaps: UVIS-scans of their gap edges show that the optical depth drops from order unity to zero over a range of far less than 100 m, a spatial scale comparable to the ring's vertical extent. This occurs despite the fact that the range over which a moon transfers angular momentum onto the ring material is much larger. Borderies et al. (1982, 1989) have shown that this striking feature is likely related to the local reversal of the usually outward-directed viscous transport of angular momentum in strongly perturbed regions. We have revised the Borderies et al. (1989) model using a granular flow model to define the shear and bulk viscosities, ν and ζ, in order to incorporate the angular momentum flux reversal effect into the axisymmetric diffusion model for circumferential gaps presented in this thesis (Grätz et al., 2019). The sharp Encke and Keeler gap edges are modeled and conclusions regarding the shear and bulk viscosities of the ring are discussed. Finally, we explore the question of whether the radial density profile of the central and outer A ring, recently measured by Tiscareno and Harris (2018) in the highest resolution to date, and in particular, the sharp outer A ring edge can be modeled consistently from the balance of gravitational scattering by several outer moons and the mass and momentum transport. To this aim, the developed model is extended to account for the inward drifts caused by multiple discrete and overlapping resonances with multiple outer satellites and is then used to hydrodynamically simulate the normalized surface mass density profile of the A ring. This section of the thesis is based on studies by Tajeddine et al. (2017a) who recently discussed the common misconception that the 7:6 resonance with Janus alone maintains the outer A ring edge, showing that the combined effort of several resonances with several outer moons is required to confine the A ring as observed by the Cassini spacecraft.},
  language  = {en}
}
@phdthesis{vonNordheim2018,
  author    = {von Nordheim, Danny},
  title     = {Dielectric non-linearities of P(VDF-TrFE) single and multilayers for memory applications},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-421778},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XVI, 109},
  year      = {2018},
  abstract  = {Poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) ferroelectric thin films of different molar ratio have been studied with regard to data memory applications. Therefore, films with thicknesses of 200 nm and less have been spin coated from solution. Observations gained from single layers have been extended to multilayer capacitors and three terminal transistor devices. Besides conventional hysteresis measurements, the measurement of dielectric non-linearities has been used as a main tool of characterisation. Being a very sensitive and non-destructive method, non-linearity measurements are well suited for polarisation readout and property studies. Samples have been excited using a high quality, single-frequency sinusoidal voltage with an amplitude significantly smaller than the coercive field of the samples. The response was then measured at the excitation frequency and its higher harmonics. Using the measurement results, the linear and non-linear dielectric permittivities ɛ₁, ɛ₂ and ɛ₃ have been determined. The permittivities have been used to derive the temperature-dependent polarisation behaviour as well as the polarisation state and the order of the phase transitions. The coercive field in VDF-TrFE copolymers is high if compared to their ceramic competitors. Therefore, the film thickness had to be reduced significantly. Considering a switching voltage of 5 V and a coercive field of 50 MV/m, the film thickness has to be 100 nm and below. If the thickness becomes substantially smaller than the other dimensions, surface and interface layer effects become more pronounced. For thicker films of P(VDF-TrFE) with a molar fraction of 56/44 a second-order phase transition without a thermal hysteresis for an ɛ₁(T) temperature cycle has been predicted and observed. This however, could not be confirmed by the measurements of thinner films. A shift of transition temperatures as well as a temperature independent, non-switchable polarisation and a thermal hysteresis for P(VDF-TrFE) 56/44 have been observed. The impact of static electric fields on the polarisation and the phase transition has therefore been studied and simulated, showing that all aforementioned phenomena including a linear temperature dependence of the polarisation might originate from intrinsic electric fields. In further experiments the knowledge gained from single layer capacitors has been extended to bilayer copolymer thin films of different molar composition. Bilayers have been deposited by succeeding cycles of spin coating from solution. Single layers and their bilayer combination have been studied individually in order to prove the layers stability. The individual layers have been found to be physically stable. But while the bilayers reproduced the main ɛ₁(T) properties of the single layers qualitatively, quantitative numbers could not be explained by a simple serial connection of capacitors. Furthermore, a linear behaviour of the polarisation throughout the measured temperature range has been observed. This was found to match the behaviour predicted considering a constant electric field. Retention time is an important quantity for memory applications. Hence, the retention behaviour of VDF-TrFE copolymer thin films has been determined using dielectric non-linearities. The polarisation loss in P(VDF-TrFE) poled samples has been found to be less than 20\% if recorded over several days. The loss increases significantly if the samples have been poled with lower amplitudes, causing an unsaturated polarisation. The main loss was attributed to injected charges. Additionally, measurements of dielectric non-linearities have been proven to be a sensitive and non-destructive tool to measure the retention behaviour. Finally, a ferroelectric field effect transistor using mainly organic materials (FerrOFET) has been successfully studied. DiNaphtho[2,3-b:2',3'-f]Thieno[3,2-b]Thiophene (DNTT) has proven to be a stable, suitable organic semiconductor to build up ferroelectric memory devices. Furthermore, an oxidised aluminium bottom electrode and additional dielectric layers, i.e. parylene C, have proven to reduce the leakage current and therefore enhance the performance significantly.},
  language  = {en}
}
@phdthesis{Rikani2023,
  author    = {Rikani, Albano},
  title     = {Modeling global human migration dynamics under climate change},
  doi       = {10.25932/publishup-58321},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-583212},
  school      = {Universit{\"a}t Potsdam},
  pages     = {x, 133},
  year      = {2023},
  abstract  = {International migration has been an increasing phenomenon during the past decades and has involved all the regions of the globe. Together with fertility and mortality rates, net migration rates represent the components that fully define the demographic evolution of the population in a country. Therefore, being able to capture the patterns of international migration flows and to produce projections of how they might change in the future is of relevant importance for demographic studies and for designing policies informed on the potential scenarios. Existing forecasting methods do not account explicitly for the main drivers and processes shaping international migration flows: existing migrant communities at the destination country, termed diasporas, would reduce the costs of migration and facilitate the settling for new migrants, ultimately producing a positive feedback; accounting for the heterogeneity in the type of migration flows, e.g. return and transit Ćows, becomes critical in some specific bilateral migration channels; in low- to middle- income countries economic development could relax poverty constraint and result in an increase of emigration rates. Economic conditions at both origin and destination are identified as major drivers of international migration. At the same time, climate change impacts have already appeared on natural and human-made systems such as the economic productivity. These economic impacts might have already produced a measurable effect on international migration flows. Studies that provide a quantification of the number of migration moves that might have been affected by climate change are usually specific to small regions, do not provide a mechanistic understanding of the pathway leading from climate change to migration and restrict their focus to the effective induced flows, disregarding the impact that climate change might have had in inhibiting other flows. Global climate change is likely to produce impacts on the economic development of the countries during the next decades too. Understanding how these impacts might alter future global migration patterns is relevant for preparing future societies and understanding whether the response in migration flows would reduce or increase population's exposure to climate change impacts. This doctoral research aims at investigating these questions and fill the research gaps outlined above. First, I have built a global bilateral international migration model which accounts explicitly for the diaspora feedback, distinguishes between transit and return flows, and accounts for the observed non-linear effects that link emigration rates to income levels in the country of origin. I have used this migration model within a population dynamic model where I account also for fertility and mortality rates, producing hindcasts and future projections of international migration flows, covering more than 170 countries. Results show that the model reproduces past patterns and trends well. Future projections highlight the fact that,depending on the assumptions regarding future evolution of income levels and between-country inequality, migration at the end of the century might approach net zero or be still high in many countries. The model, parsimonious in the explanatory variables that includes, represents a versatile tool for assessing the impacts of different socioeconomic scenarios on international migration. I consider then a counterfactual past without climate change impacts on the economic productivity. By prescribing these counterfactual economic conditions to the migration model I produce counterfactual migration flows for the past 30 years. I compare the counterfactual migration flows to factual ones, where historical economic conditions are used to produce migration flows. This provides an estimation of the recent international migration flows attributed to climate change impacts. Results show that a counterfactual world without climate change would have seen less migration globally. This effect becomes larger if I consider separately the increase and decrease in migration moves: a Ągure of net change in the migration flows is not representative of the effective magnitude of the climate change impact on migration. Indeed, in my results climate change produces a divergent effect on richer and poorer countries: by slowing down the economic development, climate change might have reduced international mobility from and to countries of the Global South, and increased it from and to richer countries in the Global North. I apply the same methodology to a scenario of future 3℃ global warming above pre-industrial conditions. I Ąnd that climate change impacts, acting by reorganizing the relative economic attractiveness of destination countries or by affecting the economic growth in the origin, might produce a substantial effect in international migration flows, inhibiting some moves and inducing others. Overall my results suggest that climate change might have had and might have in the future a significant effect on global patterns of international migration. It also emerges clearly that, for a comprehensive understanding of the effects of climate change on international migration, we need to go beyond net effects and consider separately induced and inhibited flows.},
  language  = {en}
}
@phdthesis{Dixit2023,
  author    = {Dixit, Sneha},
  title     = {Tension-induced conformational changes of the Piezo protein-membrane nano-dome},
  school      = {Universit{\"a}t Potsdam},
  pages     = {94},
  year      = {2023},
  abstract  = {Mechanosensation is a fundamental biological process that provides the basis for sensing touch and pain as well as for hearing and proprioception. A special class of ion-channel proteins known as mechanosensitive proteins convert the mechanical stimuli into electrochemical signals to mediate this process. Mechanosensitive proteins undergo conformational changes in response to mechanical force, which eventually leads to the opening of the proteins' ion channel. Mammalian mechanosensitive proteins remained a long sought-after mystery until 2010 when a family of two proteins - Piezo1 and Piezo2 - was identifed as mechanosensors [1]. The cryo-EM structures of Piezo1 and Piezo2 protein were resolved in the last years and reveal a propeller-shaped homotrimer with 114 transmembrane helices [2, 3, 4, 5]. The protein structures are curved and have been suggested to deform the surrounding membrane into a nano-dome, which mechanically responds to membrane tension resulting from external forces [2]. In this thesis, the conformations of membrane-embedded Piezo1 and Piezo2 proteins and their tension-induced conformational changes are investigated using molecular dynamics simulations. Our coarse-grained molecular dynamics simulations show that the Piezo proteins induce curvature in the surrounding membrane and form a stable protein-membrane nano-dome in the tensionless membrane. These membrane-embedded Piezo proteins, however, adopt substantially less curved conformations in our simulations compared to the cryo-EM structures solved in detergent micelles, which agrees with recent experimental investigations of the overall Piezo nano-dome shape in membrane vesicles [6, 7, 8]. At high membrane tension, the Piezo proteins attain nearly planar conformations in our simulations. Our systematic investigation of Piezo proteins under different membrane tensions indicates a half-maximal conformational response at membrane tension values rather close to the experimentally suggested values of Piezo activation [9, 10]. In addition, our simulations indicate a widening of the Piezo1 ion channel at high membrane tension, which agrees with the channel widening observed in recent nearly flattened cryo-EM structures of Piezo1 in small membrane vesicles [11]. In contrast, the Piezo2 ion channel does not respond to membrane tension in our simulations. These different responses of the Piezo1 and Piezo2 ion channels in our simulations are in line with patch-clamp experiments, in which Piezo1, but not Piezo2, was shown to be activated by membrane tension alone [12].},
  language  = {en}
}
@phdthesis{Kairaliyeva2023,
  author    = {Kairaliyeva, Talmira},
  title     = {Surfactant adorption at liquid interfaces measured by drop and bubble experiments},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VII, 117},
  year      = {2023},
  language  = {en}
}
@phdthesis{Kriegler2005,
  author    = {Kriegler, Elmar},
  title     = {Imprecise probability analysis for integrated assessment of climate change},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5611},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {We present an application of imprecise probability theory to the quantification of uncertainty in the integrated assessment of climate change. Our work is motivated by the fact that uncertainty about climate change is pervasive, and therefore requires a thorough treatment in the integrated assessment process. Classical probability theory faces some severe difficulties in this respect, since it cannot capture very poor states of information in a satisfactory manner. A more general framework is provided by imprecise probability theory, which offers a similarly firm evidential and behavioural foundation, while at the same time allowing to capture more diverse states of information. An imprecise probability describes the information in terms of lower and upper bounds on probability. For the purpose of our imprecise probability analysis, we construct a diffusion ocean energy balance climate model that parameterises the global mean temperature response to secular trends in the radiative forcing in terms of climate sensitivity and effective vertical ocean heat diffusivity. We compare the model behaviour to the 20th century temperature record in order to derive a likelihood function for these two parameters and the forcing strength of anthropogenic sulphate aerosols. Results show a strong positive correlation between climate sensitivity and ocean heat diffusivity, and between climate sensitivity and absolute strength of the sulphate forcing. We identify two suitable imprecise probability classes for an efficient representation of the uncertainty about the climate model parameters and provide an algorithm to construct a belief function for the prior parameter uncertainty from a set of probability constraints that can be deduced from the literature or observational data. For the purpose of updating the prior with the likelihood function, we establish a methodological framework that allows us to perform the updating procedure efficiently for two different updating rules: Dempster's rule of conditioning and the Generalised Bayes' rule. Dempster's rule yields a posterior belief function in good qualitative agreement with previous studies that tried to constrain climate sensitivity and sulphate aerosol cooling. In contrast, we are not able to produce meaningful imprecise posterior probability bounds from the application of the Generalised Bayes' Rule. We can attribute this result mainly to our choice of representing the prior uncertainty by a belief function. We project the Dempster-updated belief function for the climate model parameters onto estimates of future global mean temperature change under several emissions scenarios for the 21st century, and several long-term stabilisation policies. Within the limitations of our analysis we find that it requires a stringent stabilisation level of around 450 ppm carbon dioxide equivalent concentration to obtain a non-negligible lower probability of limiting the warming to 2 degrees Celsius. We discuss several frameworks of decision-making under ambiguity and show that they can lead to a variety of, possibly imprecise, climate policy recommendations. We find, however, that poor states of information do not necessarily impede a useful policy advice. We conclude that imprecise probabilities constitute indeed a promising candidate for the adequate treatment of uncertainty in the integrated assessment of climate change. We have constructed prior belief functions that allow much weaker assumptions on the prior state of information than a prior probability would require and, nevertheless, can be propagated through the entire assessment process. As a caveat, the updating issue needs further investigation. Belief functions constitute only a sensible choice for the prior uncertainty representation if more restrictive updating rules than the Generalised Bayes'Rule are available.},
  subject      = {Anthropogene Klima{\"a}nderung},
  language  = {en}
}
@phdthesis{FloresSuarez2011,
  author    = {Flores Su{\´a}rez, Rosaura},
  title     = {Three-dimensional polarization probing in polymer ferroelectrics, polymer-dispersed liquid crystals, and polymer ferroelectrets},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60173},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {A key non-destructive technique for analysis, optimization and developing of new functional materials such as sensors, transducers, electro-optical and memory devices is presented. The Thermal-Pulse Tomography (TPT) provides high-resolution three-dimensional images of electric field and polarization distribution in a material. This thermal technique use a pulsed heating by means of focused laser light which is absorbed by opaque electrodes. The diffusion of the heat causes changes in the sample geometry, generating a short-circuit current or change in surface potential, which contains information about the spatial distribution of electric dipoles or space charges. Afterwards, a reconstruction of the internal electric field and polarization distribution in the material is possible via Scale Transformation or Regularization methods. In this way, the TPT was used for the first time to image the inhomogeneous ferroelectric switching in polymer ferroelectric films (candidates to memory devices). The results shows the typical pinning of electric dipoles in the ferroelectric polymer under study and support the previous hypotheses of a ferroelectric reversal at a grain level via nucleation and growth. In order to obtain more information about the impact of the lateral and depth resolution of the thermal techniques, the TPT and its counterpart called Focused Laser Intensity Modulation Method (FLIMM) were implemented in ferroelectric films with grid-shaped electrodes. The results from both techniques, after the data analysis with different regularization and scale methods, are in total agreement. It was also revealed a possible overestimated lateral resolution of the FLIMM and highlights the TPT method as the most efficient and reliable thermal technique. After an improvement in the optics, the Thermal-Pulse Tomography method was implemented in polymer-dispersed liquid crystals (PDLCs) films, which are used in electro-optical applications. The results indicated a possible electrostatic interaction between the COH group in the liquid crystals and the fluorinate atoms of the used ferroelectric matrix. The geometrical parameters of the LC droplets were partially reproduced as they were compared with Scanning Electron Microscopy (SEM) images. For further applications, it is suggested the use of a non-strong-ferroelectric polymer matrix. In an effort to develop new polymerferroelectrets and for optimizing their properties, new multilayer systems were inspected. The results of the TPT method showed the non-uniformity of the internal electric-field distribution in the shaped-macrodipoles and thus suggested the instability of the sample. Further investigation on multilayers ferroelectrets was suggested and the implementation of less conductive polymers layers too.},
  language  = {en}
}
@phdthesis{Fang2010,
  author    = {Fang, Peng},
  title     = {Preparation and investigation of polymer-foam films and polymer-layer systems for ferroelectrets},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-48412},
  school      = {Universit{\"a}t Potsdam},
  year      = {2010},
  abstract  = {Piezoelectric materials are very useful for applications in sensors and actuators. In addition to traditional ferroelectric ceramics and ferroelectric polymers, ferroelectrets have recently become a new group of piezoelectrics. Ferroelectrets are functional polymer systems for electromechanical transduction, with elastically heterogeneous cellular structures and internal quasi-permanent dipole moments. The piezoelectricity of ferroelectrets stems from linear changes of the dipole moments in response to external mechanical or electrical stress. Over the past two decades, polypropylene (PP) foams have been investigated with the aim of ferroelectret applications, and some products are already on the market. PP-foam ferroelectrets may exhibit piezoelectric d33 coefficients of 600 pC/N and more. Their operating temperature can, however, not be much higher than 60 °C. Recently developed polyethylene-terephthalate (PET) and cyclo-olefin copolymer (COC) foam ferroelectrets show slightly better d33 thermal stabilities, but usually at the price of smaller d33 values. Therefore, the main aim of this work is the development of new thermally stable ferroelectrets with appreciable piezoelectricity. Physical foaming is a promising technique for generating polymer foams from solid films without any pollution or impurity. Supercritical carbon dioxide (CO2) or nitrogen (N2) are usually employed as foaming agents due to their good solubility in several polymers. Polyethylene propylene (PEN) is a polyester with slightly better properties than PET. A "voiding + inflation + stretching" process has been specifically developed to prepare PEN foams. Solid PEN films are saturated with supercritical CO2 at high pressure and then thermally voided at high temperatures. Controlled inflation (Gas-Diffusion Expansion or GDE) is applied in order to adjust the void dimensions. Additional biaxial stretching decreases the void heights, since it is known lens-shaped voids lead to lower elastic moduli and therefore also to stronger piezoelectricity. Both, contact and corona charging are suitable for the electric charging of PEN foams. The light emission from the dielectric-barrier discharges (DBDs) can be clearly observed. Corona charging in a gas of high dielectric strength such as sulfur hexafluoride (SF6) results in higher gas-breakdown strength in the voids and therefore increases the piezoelectricity. PEN foams can exhibit piezoelectric d33 coefficients as high as 500 pC/N. Dielectric-resonance spectra show elastic moduli c33 of 1 - 12 MPa, anti-resonance frequencies of 0.2 - 0.8 MHz, and electromechanical coupling factors of 0.016 - 0.069. As expected, it is found that PEN foams show better thermal stability than PP and PET. Samples charged at room temperature can be utilized up to 80 - 100 °C. Annealing after charging or charging at elevated temperatures may improve thermal stabilities. Samples charged at suitable elevated temperatures show working temperatures as high as 110 - 120 °C. Acoustic measurements at frequencies of 2 Hz - 20 kHz show that PEN foams can be well applied in this frequency range. Fluorinated ethylene-propylene (FEP) copolymers are fluoropolymers with very good physical, chemical and electrical properties. The charge-storage ability of solid FEP films can be significantly improved by adding boron nitride (BN) filler particles. FEP foams are prepared by means of a one-step procedure consisting of CO2 saturation and subsequent in-situ high-temperature voiding. Piezoelectric d33 coefficients up to 40 pC/N are measured on such FEP foams. Mechanical fatigue tests show that the as-prepared PEN and FEP foams are mechanically stable for long periods of time. Although polymer-foam ferroelectrets have a high application potential, their piezoelectric properties strongly depend on the cellular morphology, i.e. on size, shape, and distribution of the voids. On the other hand, controlled preparation of optimized cellular structures is still a technical challenge. Consequently, new ferroelectrets based on polymer-layer system (sandwiches) have been prepared from FEP. By sandwiching an FEP mesh between two solid FEP films and fusing the polymer system with a laser beam, a well-designed uniform macroscopic cellular structure can be formed. Dielectric resonance spectroscopy reveals piezoelectric d33 coefficients as high as 350 pC/N, elastic moduli of about 0.3 MPa, anti-resonance frequencies of about 30 kHz, and electromechanical coupling factors of about 0.05. Samples charged at elevated temperatures show better thermal stabilities than those charged at room temperature, and the higher the charging temperature, the better is the stability. After proper charging at 140 °C, the working temperatures can be as high as 110 - 120 °C. Acoustic measurements at frequencies of 200 Hz - 20 kHz indicate that the FEP layer systems are suitable for applications at least in this range.},
  language  = {en}
}
@phdthesis{Stoyanov2011,
  author    = {Stoyanov, Hristiyan},
  title     = {Soft nanocomposites with enhanced electromechanical response for dielectric elastomer actuators},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-51194},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Electromechanical transducers based on elastomer capacitors are presently considered for many soft actuation applications, due to their large reversible deformation in response to electric field induced electrostatic pressure. The high operating voltage of such devices is currently a large drawback, hindering their use in applications such as biomedical devices and biomimetic robots, however, they could be improved with a careful design of their material properties. The main targets for improving their properties are increasing the relative permittivity of the active material, while maintaining high electric breakdown strength and low stiffness, which would lead to enhanced electrostatic storage ability and hence, reduced operating voltage. Improvement of the functional properties is possible through the use of nanocomposites. These exploit the high surface-to-volume ratio of the nanoscale filler, resulting in large effects on macroscale properties. This thesis explores several strategies for nanomaterials design. The resulting nanocomposites are fully characterized with respect to their electrical and mechanical properties, by use of dielectric spectroscopy, tensile mechanical analysis, and electric breakdown tests. First, nanocomposites consisting of high permittivity rutile TiO2 nanoparticles dispersed in thermoplastic block copolymer SEBS (poly-styrene-coethylene-co-butylene-co-styrene) are shown to exhibit permittivity increases of up to 3.7 times, leading to 5.6 times improvement in electrostatic energy density, but with a trade-off in mechanical properties (an 8-fold increase in stiffness). The variation in both electrical and mechanical properties still allows for electromechanical improvement, such that a 27 \% reduction of the electric field is found compared to the pure elastomer. Second, it is shown that the use of nanofiller conductive particles (carbon black (CB)) can lead to a strong increase of relative permittivity through percolation, however, with detrimental side effects. These are due to localized enhancement of the electric field within the composite, which leads to sharp reductions in electric field strength. Hence, the increase in permittivity does not make up for the reduction in breakdown strength in relation to stored electrical energy, which may prohibit their practical use. Third, a completely new approach for increasing the relative permittivity and electrostatic energy density of a polymer based on 'molecular composites' is presented, relying on chemically grafting soft π-conjugated macromolecules to a flexible elastomer backbone. Polarization caused by charge displacement along the conjugated backbone is found to induce a large and controlled permittivity enhancement (470 \% over the elastomer matrix), while chemical bonding, encapsulates the PANI chains manifesting in hardly any reduction in electric breakdown strength, and hence resulting in a large increase in stored electrostatic energy. This is shown to lead to an improvement in the sensitivity of the measured electromechanical response (83 \% reduction of the driving electric field) as well as in the maximum actuation strain (250 \%). These results represent a large step forward in the understanding of the strategies which can be employed to obtain high permittivity polymer materials with practical use for electro-elastomer actuation.},
  language  = {en}
}
@phdthesis{CamachoGonzalez2006,
  author    = {Camacho Gonz{\´a}lez, Francisco},
  title     = {Charge-Storage mechanisms in polymer electrets},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-8756},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {In view of the importance of charge storage in polymer electrets for electromechanical transducer applications, the aim of this work is to contribute to the understanding of the charge-retention mechanisms. Furthermore, we will try to explain how the long-term storage of charge carriers in polymeric electrets works and to identify the probable trap sites. Charge trapping and de-trapping processes were investigated in order to obtain evidence of the trap sites in polymeric electrets. The charge de-trapping behavior of two particular polymer electrets was studied by means of thermal and optical techniques. In order to obtain evidence of trapping or de-trapping, charge and dipole profiles in the thickness direction were also monitored. In this work, the study was performed on polyethylene terephthalate (PETP) and on cyclic-olefin copolymers (COCs). PETP is a photo-electret and contains a net dipole moment that is located in the carbonyl group (C = O). The electret behavior of PETP arises from both the dipole orientation and the charge storage. In contrast to PETP, COCs are not photo-electrets and do not exhibit a net dipole moment. The electret behavior of COCs arises from the storage of charges only. COC samples were doped with dyes in order to probe their internal electric field. COCs show shallow charge traps at 0.6 and 0.11 eV, characteristic for thermally activated processes. In addition, deep charge traps are present at 4 eV, characteristic for optically stimulated processes. PETP films exhibit a photo-current transient with a maximum that depends on the temperature with an activation energy of 0.106 eV. The pair thermalization length (rc) calculated from this activation energy for the photo-carrier generation in PETP was estimated to be approx. 4.5 nm. The generated photo-charge carriers can recombine, interact with the trapped charge, escape through the electrodes or occupy an empty trap. PETP possesses a small quasi-static pyroelectric coefficient (QPC): ~0.6 nC/(m²K) for unpoled samples, ~60 nC/(m²K) for poled samples and ~60 nC/(m²K) for unpoled samples under an electric bias (E ~10 V/µm). When stored charges generate an internal electric field of approx. 10 V/µm, they are able to induce a QPC comparable to that of the oriented dipoles. Moreover, we observe charge-dipole interaction. Since the raw data of the QPC-experiments on PETP samples is noisy, a numerical Fourier-filtering procedure was applied. Simulations show that the data analysis is reliable when the noise level is up to 3 times larger than the calculated pyroelectric current for the QPC. PETP films revealed shallow traps at approx. 0.36 eV during thermally-stimulated current measurements. These energy traps are associated with molecular dipole relaxations (C = O). On the other hand, photo-activated measurements yield deep charge traps at 4.1 and 5.2 eV. The observed wavelengths belong to the transitions in PETP that are analogous to the π - π* benzene transitions. The observed charge de-trapping selectivity in the photocharge decay indicates that the charge detrapping is from a direct photon-charge interaction. Additionally, the charge de-trapping can be facilitated by photo-exciton generation and the interaction of the photo-excitons with trapped charge carriers. These results indicate that the benzene rings (C6H4) and the dipolar groups (C = O) can stabilize and share an extra charge carrier in a chemical resonance. In this way, this charge could be de-trapped in connection with the photo-transitions of the benzene ring and with the dipole relaxations. The thermally-activated charge release shows a difference in the trap depth to its optical counterpart. This difference indicates that the trap levels depend on the de-trapping process and on the chemical nature of the trap site. That is, the processes of charge detrapping from shallow traps are related to secondary forces. The processes of charge de-trapping from deep traps are related to primary forces. Furthermore, the presence of deep trap levels causes the stability of the charge for long periods of time.},
  subject      = {Charge-Storage},
  language  = {en}
}
@phdthesis{Kappel2012,
  author    = {Kappel, Marcel},
  title     = {Scattering effects in the sound wave propagation of instrument soundboards},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-62676},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {In the western hemisphere, the piano is one of the most important instruments. While its evolution lasted for more than three centuries, and the most important physical aspects have already been investigated, some parts in the characterization of the piano remain not well understood. Considering the pivotal piano soundboard, the effect of ribs mounted on the board exerted on the sound radiation and propagation in particular, is mostly neglected in the literature. The present investigation deals exactly with the sound wave propagation effects that emerge in the presence of an array of equally-distant mounted ribs at a soundboard. Solid-state theory proposes particular eigenmodes and -frequencies for such arrangements, which are comparable to single units in a crystal. Following this 'linear chain model' (LCM), differences in the frequency spectrum are observable as a distinct band structure. Also, the amplitudes of the modes are changed, due to differences of the damping factor. These scattering effects were not only investigated for a well-understood conceptional rectangular soundboard (multichord), but also for a genuine piano resonance board manufactured by the piano maker company 'C. Bechstein Pianofortefabrik'. To obtain the possibility to distinguish between the characterizing spectra both with and without mounted ribs, the typical assembly plan for the Bechstein instrument was specially customized. Spectral similarities and differences between both boards are found in terms of damping and tone. Furthermore, specially prepared minimal-invasive piezoelectric polymer sensors made from polyvinylidene fluoride (PVDF) were used to record solid-state vibrations of the investigated system. The essential calibration and characterization of these polymer sensors was performed by determining the electromechanical conversion, which is represented by the piezoelectric coefficient. Therefore, the robust 'sinusoidally varying external force' method was applied, where a dynamic force perpendicular to the sensor's surface, generates movable charge carriers. Crucial parameters were monitored, with the frequency response function as the most important one for acousticians. Along with conventional condenser microphones, the sound was measured as solid-state vibration as well as airborne wave. On this basis, statements can be made about emergence, propagation, and also the overall radiation of the generated modes of the vibrating system. Ultimately, these results acoustically characterize the entire system.},
  language  = {en}
}
@phdthesis{Ganesan2010,
  author    = {Ganesan, Lakshmi Meena},
  title     = {Coupling of the electrical, mechanical and optical response in polymer/liquid-crystal composites},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41572},
  school      = {Universit{\"a}t Potsdam},
  year      = {2010},
  abstract  = {Micrometer-sized liquid-crystal (LC) droplets embedded in a polymer matrix may enable optical switching in the composite film through the alignment of the LC director along an external electric field. When a ferroelectric material is used as host polymer, the electric field generated by the piezoelectric effect can orient the director of the LC under an applied mechanical stress, making these materials interesting candidates for piezo-optical devices. In this work, polymer-dispersed liquid crystals (PDLCs) are prepared from poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) and a nematic liquid crystal (LC). The anchoring effect is studied by means of dielectric relaxation spectroscopy. Two dispersion regions are observed in the dielectric spectra of the pure P(VDF-TrFE) film. They are related to the glass transition and to a charge-carrier relaxation, respectively. In PDLC films containing 10 and 60 wt\% LC, an additional, bias-field-dependent relaxation peak is found that can be attributed to the motion of LC molecules. Due to the anchoring effect of the LC molecules, this relaxation process is slowed down considerably, when compared with the related process in the pure LC. The electro-optical and piezo-optical behavior of PDLC films containing 10 and 60 wt\% LCs is investigated. In addition to the refractive-index mismatch between the polymer matrix and the LC molecules, the interaction between the polymer dipoles and the LC molecules at the droplet interface influences the light-scattering behavior of the PDLC films. For the first time, it was shown that the electric field generated by the application of a mechanical stress may lead to changes in the transmittance of a PDLC film. Such a piezo-optical PDLC material may be useful e.g. in sensing and visualization applications. Compared to a non-polar matrix polymer, the polar matrix polymer exhibits a strong interaction with the LC molecules at the polymer/LC interface which affects the electro-optical effect of the PDLC films and prevents a larger increase in optical transmission.},
  language  = {en}
}
@phdthesis{Kalbitz2011,
  author    = {Kalbitz, Ren{\´e}},
  title     = {Stability of polarization in organic ferroelectric metal-insulator-semiconductor structures},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-57276},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Organic thin film transistors (TFT) are an attractive option for low cost electronic applications and may be used for active matrix displays and for RFID applications. To extend the range of applications there is a need to develop and optimise the performance of non-volatile memory devices that are compatible with the solution-processing fabrication procedures used in plastic electronics. A possible candidate is an organic TFT incorporating the ferroelectric co-polymer poly(vinylidenefluoride-trifluoroethylene)(P(VDF-TrFE)) as the gate insulator. Dielectric measurements have been carried out on all-organic metal-insulator-semiconductor structures with the ferroelectric polymer poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) as the gate insu-lator. The capacitance spectra of MIS devices, were measured under different biases, showing the effect of charge accumulation and depletion on the Maxwell-Wagner peak. The position and height of this peak clearly indicates the lack of stable depletion behavior and the decrease of mobility when increasing the depletion zone width, i.e. upon moving into the P3HT bulk. The lack of stable depletion was further investigated with capacitance-voltage (C-V) measurements. When the structure was driven into depletion, C-V plots showed a positive flat-band voltage shift, arising from the change in polarization state of the ferroelectric insulator. When biased into accumulation, the polarization was reversed. It is shown that the two polarization states are stable i.e. no depolarization occurs below the coercive field. However, negative charge trapped at the semiconductor-insulator interface during the depletion cycle masks the negative shift in flat-band voltage expected during the sweep to accumulation voltages. The measured output characteristics of the studied ferroelectric-field-effect transistors confirmed the results of the C-V plots. Furthermore, the results indicated a trapping of electrons at the positively charged surfaces of the ferroelectrically polarized P(VDF-TrFE) crystallites near the insulator/semiconductor in-terface during the first poling cycles. The study of the MIS structure by means of thermally stimulated current (TSC) revealed further evidence for the stability of the polarization under depletion voltages. It was shown, that the lack of stable depletion behavior is caused by the compensation of the orientational polarization by fixed electrons at the interface and not by the depolarization of the insulator, as proposed in several publications. The above results suggest a performance improvement of non-volatile memory devices by the optimization of the interface.},
  language  = {en}
}
@phdthesis{RodriguezLoureiro2018,
  author    = {Rodriguez Loureiro, Ignacio},
  title     = {Structural characterization of single and interacting soft interfaces displaying brushes of synthetic or biomolecular polymers},
  doi       = {10.25932/publishup-42367},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-423675},
  school      = {Universit{\"a}t Potsdam},
  pages     = {132},
  year      = {2018},
  abstract  = {The interaction between surfaces displaying end-grafted hydrophilic polymer brushes plays important roles in biology and in many wet-technological applications. The outer surfaces of Gram-negative bacteria, for example, are composed of lipopolysaccharide (LPS) molecules exposing oligo- and polysaccharides to the aqueous environment. This unique, structurally complex biological interface is of great scientific interest as it mediates the interaction of bacteria with neighboring bacteria in colonies and biofilms. The interaction between polymer-decorated surfaces is generally coupled to the distance-dependent conformation of the polymer chains. Therefore, structural insight into the interacting surfaces is a prerequisite to understand the interaction characteristics as well as the underlying physical mechanisms. This problem has been addressed by theory, but accurate experimental data on polymer conformations under confinement are rare, because obtaining perturbation-free structural insight into buried soft interfaces is inherently difficult. In this thesis, lipid membrane surfaces decorated with hydrophilic polymers of technological and biological relevance are investigated under controlled interaction conditions, i.e., at defined surface separations. For this purpose, dedicated sample architectures and experimental tools are developed. Via ellipsometry and neutron reflectometry pressure-distance curves and distance-dependent polymer conformations in terms of brush compression and reciprocative interpenetration are determined. Additional element-specific structural insight into the end-point distribution of interacting brushes is obtained by standing-wave x-ray fluorescence (SWXF). The methodology is first established for poly[ethylene glycol] (PEG) brushes of defined length and grafting density. For this system, neutron reflectometry revealed pronounced brush interpenetration, which is not captured in common brush theories and therefore motivates rigorous simulation-based treatments. In the second step the same approach is applied to realistic mimics of the outer surfaces of Gram-negative bacteria: monolayers of wild type LPSs extracted from E. Coli O55:B5 displaying strain-specific O-side chains. The neutron reflectometry experiments yield unprecedented structural insight into bacterial interactions, which are of great relevance for the properties of biofilms.},
  language  = {en}
}
@phdthesis{Nagel2019,
  author    = {Nagel, Oliver},
  title     = {Amoeboid cells as a transport system for micro-objects},
  doi       = {10.25932/publishup-44219},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-442192},
  school      = {Universit{\"a}t Potsdam},
  pages     = {x, 84},
  year      = {2019},
  abstract  = {Due to advances in science and technology towards smaller and more powerful processing units, the fabrication of micrometer sized machines for different tasks becomes more and more possible. Such micro-robots could revolutionize medical treatment of diseases and shall support to work on other small machines. Nevertheless, scaling down robots and other devices is a challenging task and will probably remain limited in near future. Over the past decade the concept of bio-hybrid systems has proved to be a promising approach in order to advance the further development of micro-robots. Bio-hybrid systems combine biological cells with artificial components, thereby benefiting from the functionality of living biological cells. Cell-driven micro-transport is one of the most prominent applications in the emerging field of these systems. So far, micrometer sized cargo has been successfully transported by means of swimming bacterial cells. The potential of motile adherent cells as transport systems has largely remained unexplored. This thesis concentrates on the social amoeba Dictyostelium discoideum as a potential candidate for an amoeboid bio-hybrid transport system. The use of this model organism comes with several advantages. Due to the unspecific properties of Dictyostelium adhesion, a wide range of different cargo materials can be used for transport. As amoeboid cells exceed bacterial cells in size by one order of magnitude, also the size of an object carried by a single cell can also be much larger for an amoeba. Finally it is possible to guide the cell-driven transport based on the chemotactic behavior of the amoeba. Since cells undergo a developmentally induced chemotactic aggregation, cargo could be assembled in a self-organized manner into a cluster. It is also possible to impose an external chemical gradient to guide the amoeboid transport system to a desired location. To establish Dictyostelium discoideum as a possible candidate for bio-hybrid transport systems, this thesis will first investigate the movement of single cells. Secondly, the interaction of cargo and cells will be studied. Eventually, a conceptional proof will be conducted, that the cheomtactic behavior can be exploited either to transport a cargo self-organized or through an external chemical source.},
  language  = {en}
}
@phdthesis{Sharma2023,
  author    = {Sharma, Anjali},
  title     = {Optical manipulation of multi-responsive microgels},
  school      = {Universit{\"a}t Potsdam},
  pages     = {207},
  year      = {2023},
  abstract  = {This dissertation focuses on the understanding of the optical manipulation of microgels dispersed in aqueous solution of azobenzene containing surfactant. The work consists of three parts where each part is a systematic investigation of the (1) photo-isomerization kinetics of the surfactant in complex with the microgel polymer matrix, (2) light driven diffusiosmosis (LDDO) in microgels and (3) photo-responsivity of microgel on complexation with spiropyran. The first part comprises three publications where the first one [P1] investigates the photo-isomerization kinetics and corresponding isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged polymers or micro sized polymer networks to understand the structural response of such photo-sensitive complexes. We report that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in an aqueous solution. The surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration. This, along with the inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates, pushes the isomer-ratio to a higher trans-isomer concentration for all irradiation wavelengths. The second publication [P2] combines experimental results and non-adiabatic dynamic simulations for the same surfactant molecules embedded in the micelles with absorption spectroscopy measurements of micellar solutions to uncover the reasons responsible for the slowdown in photo induced trans → cis azobenzene isomerization at concentrations higher than the critical micelle concentration (CMC). The simulations reveal a decrease of isomerization quantum yields for molecules inside the micelles and observes a reduction of extinction coefficients upon micellization. These findings explain the deceleration of the trans → cis switching in micelles of the azobenzene-containing surfactants. Finally, the third publication [P3] focusses on the kinetics of adsorption and desorption of the same surfactant within anionic microgels in the dark and under continuous irradiation. Experimental data demonstrate, that microgels can serve as a selective absorber of the trans isomers. The interaction of the isomers with the gel matrix induces a remotely controllable collapse or swelling on appropriate irradiation wavelengths. Measuring the kinetics of the microgel size response and knowing the exact isomer composition under light exposure, we calculate the adsorption rate of the trans-isomers. The second part comprises two publications. The first publication [P4] reports on the phenomenon of light-driven diffusioosmotic (DO) long-range attractive and repulsive interactions between micro-sized objects, whose range extends several times the size of microparticles and can be adjusted to point towards or away from the particle by varying irradiation parameters such as intensity or wavelength of light. The phenomenon is fueled by the aforementioned photosensitive surfactant. The complex interaction of dynamic exchange of isomers and photo-isomerization rate yields to relative concentrations gradients of the isomers in the vicinity of micro-sized object inducing a local diffusioosmotic (DO) flow thereby making a surface act as a micropump. The second publication [P5] exclusively aims the visualization and investigation of the DO flows generated from microgels by using small tracer particles. Similar to micro sized objects, the flow is able to push adjacent tracers over distances several times larger than microgel size. Here we report that the direction and the strength of the l-LDDO depends on the intensity, irradiation wavelength and the amount of surfactant adsorbed by the microgel. For example, the flow pattern around a microgel is directed radially outward and can be maintained quasi-indefinitely under exposure at 455 nm when the trans:cis ratio is 2:1, whereas irradiation at 365 nm, generates a radially transient flow pattern, which inverts at lower intensities. Lastly, the third part consists of one publication [P6] which, unlike the previous works, reports on the study of the kinetics of photo- and thermo-switching of a new surfactant namely, spiropyran, upon exposure with light of different wavelengths and its interaction with p(NIPAM-AA) microgels. The surfactant being an amphiphile, switches between its ring closed spiropyran (SP) form and ring open merocyanine (MC) form which results in a change in the hydrophilic-hydrophobic balance of the surfactant as MC being a zwitterionic form along with the charged head group, generates three charges on the molecule. Therefore, the MC form of the surfactant is more hydrophilic than in the case of the neutral SP state. Here, we investigate the initial shrinkage of the gel particles via charge compensation on first exposure to SP molecules which results from the complex formation of the molecules with the gel matrix, triggering them to become photo responsive. The size and VPTT of the microgels during irradiation is shown to be a combination of heating up of the solution during light absorption by the surfactant (more pronounced in the case of UV irradiation) and the change in the hydrophobicity of the surfactant.},
  language  = {en}
}
@phdthesis{Eckert2019,
  author    = {Eckert, Sebastian},
  title     = {Accessing active sites of molecular proton dynamics},
  doi       = {10.25932/publishup-42587},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-425870},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xviii, 193},
  year      = {2019},
  abstract  = {The unceasing impact of intense sunlight on earth constitutes a continuous source of energy fueling countless natural processes. On a molecular level, the energy contained in the electromagnetic radiation is transferred through photochemical processes into chemical or thermal energy. In the course of such processes, photo-excitations promote molecules into thermally inaccessible excited states. This induces adaptations of their molecular geometry according to the properties of the excited state. Decay processes towards energetically lower lying states in transient molecular geometries result in the formation of excited state relaxation pathways. The photo-chemical relaxation mechanisms depend on the studied system itself, the interactions with its chemical environment and the character of the involved states. This thesis focuses on systems in which photo-induced deprotonation processes occur at specific atomic sites. To detect these excited-state proton dynamics at the affected atoms, a local probe of molecular electronic structure is required. Therefore, site-selective and orbital-specific K-edge soft X-ray spectroscopy techniques are used here to detect photo-induced proton dynamics in gaseous and liquid sample environments. The protonation of nitrogen (N) sites in organic molecules and the oxygen (O) atom in the water molecule are probed locally through transitions between 1s orbitals and the p-derived molecular valence electronic structure. The used techniques are X-ray absorption spectroscopy (XAS) and resonant inelastic X-ray scattering (RIXS). Both yield access to the unoccupied local valence electronic structure, whereas the latter additionally probes occupied states. We apply these probes in optical pump X-ray probe experiments to investigate valence excited-state proton transfer capabilities of aqueous 2-thiopyridone. A characteristic shift of N K-edge X-ray absorption resonances as well as a distinct X-ray emission line are established by us as spectral fingerprints of N deprotonation in the system. We utilize them to identify photo-induced N deprotonation of 2-thiopyridone on femtosecond timescales, in optical pump N K-edge RIXS probe measurements. We further establish excited state proton transfer mechanisms on picosecond and nanosecond timescales along the dominant relaxation pathways of 2-thiopyridone using transient N K-edge XAS. Despite being an excellent probe mechanism for valence excited-state proton dynamics, the K-edge core-excitation itself also disturbs the electronic structure at specific sites of a molecule. The rapid reaction of protons to 1s photo-excitations can yield directional structural distortions within the femtosecond core-excited state lifetime. These directional proton dynamics can change the energetic separation of eigenstates of the system and alter probabilities for radiative decay between them. Both effects yield spectral signatures of the dynamics in RIXS spectra. Using these signatures of RIXS transitions into electronically excited states, we investigate proton dynamics induced by N K-edge excitation in the amino-acid histidine. The minor core-excited state dynamics of histidine in basic and neutral chemical environments allow us to establish XAS and RIXS spectral signatures of different N protonation states at its imidazole N sites. Based on these signatures, we identify an excitation-site-independent N-H dissociation for N K-edge excitation under acidic conditions. Such directional structural deformations, induced by core-excitations, also make proton dynamics in electronic ground states accessible through RIXS transitions into vibrationally excited states. In that context, we interpret high resolution RIXS spectra of the water molecule for three O K-edge resonances based on quantum-chemical wave packet propagation simulations. We show that highly oriented ground state vibrational modes of coupled nuclear motion can be populated through RIXS processes by preparation of core-excited state nuclear wave packets with the same directionality. Based on that, we analytically derive the possibility to extract one-dimensional directional cuts through potential energy surfaces of molecular systems from the corresponding RIXS spectra. We further verify this concept through the extraction of the gas-phase water ground state potential along three coordinates from experimental data in comparison to quantum-chemical simulations of the potential energy surface. This thesis also contains contributions to instrumentation development for investigations of photo-induced molecular dynamics at high brilliance X-ray light sources. We characterize the setup used for the transient valence-excited state XAS measurements of 2-thiopyridone. Therein, a sub-micrometer thin liquid sample environment is established employing in-vacuum flat-jet technology, which enables a transmission experimental geometry. In combination with a MHz-laser system, we achieve a high detection sensitivity for photo-induced X-ray absorption changes. Additionally, we present conceptual improvements for temporal X-ray optical cross-correlation techniques based on transient changes of multilayer optical properties, which are crucial for the realization of femtosecond time-resolved studies at synchrotrons and free-electron lasers.},
  language  = {en}
}
@phdthesis{Ruppert2016,
  author    = {Ruppert, Jan},
  title     = {The Low-Mass Young Stellar Content in the Extended Environment of the Galactic Starburst Region NGC3603},
  school      = {Universit{\"a}t Potsdam},
  pages     = {148},
  year      = {2016},
  language  = {en}
}
@phdthesis{Sommerfeld2015,
  author    = {Sommerfeld, Anja},
  title     = {Quantification of internal variability of the arctic summer atmosphere based on HIRHAM5 ensemble simulations},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85347},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VII, 110, vi},
  year      = {2015},
  abstract  = {The non-linear behaviour of the atmospheric dynamics is not well understood and makes the evaluation and usage of regional climate models (RCMs) difficult. Due to these non-linearities, chaos and internal variability (IV) within the RCMs are induced, leading to a sensitivity of RCMs to their initial conditions (IC). The IV is the ability of RCMs to realise different solutions of simulations that differ in their IC, but have the same lower and lateral boundary conditions (LBC), hence can be defined as the across-member spread between the ensemble members. For the investigation of the IV and the dynamical and diabatic contributions generating the IV four ensembles of RCM simulations are performed with the atmospheric regional model HIRHAM5. The integration area is the Arctic and each ensemble consists of 20 members. The ensembles cover the time period from July to September for the years 2006, 2007, 2009 and 2012. The ensemble members have the same LBC and differ in their IC only. The different IC are arranged by an initialisation time that shifts successively by six hours. Within each ensemble the first simulation starts on 1st July at 00 UTC and the last simulation starts on 5th July at 18 UTC and each simulation runs until 30th September. The analysed time period ranges from 6th July to 30th September, the time period that is covered by all ensemble members. The model runs without any nudging to allow a free development of each simulation to get the full internal variability within the HIRHAM5. As a measure of the model generated IV, the across-member standard deviation and the across-member variance is used and the dynamical and diabatic processes influencing the IV are estimated by applying a diagnostic budget study for the IV tendency of the potential temperature developed by Nikiema and Laprise [2010] and Nikiema and Laprise [2011]. The diagnostic budget study is based on the first law of thermodynamics for potential temperature and the mass-continuity equation. The resulting budget equation reveals seven contributions to the potential temperature IV tendency. As a first study, this work analyses the IV within the HIRHAM5. Therefore, atmospheric circulation parameters and the potential temperature for all four ensemble years are investigated. Similar to previous studies, the IV fluctuates strongly in time. Further, due to the fact that all ensemble members are forced with the same LBC, the IV depends on the vertical level within the troposphere, with high values in the lower troposphere and at 500 hPa and low values in the upper troposphere and at the surface. By the same reason, the spatial distribution shows low values of IV at the boundaries of the model domain. The diagnostic budget study for the IV tendency of potential temperature reveals that the seven contributions fluctuate in time like the IV. However, the individual terms reach different absolute magnitudes. The budget study identifies the horizontal and vertical 'baroclinic' terms as the main contributors to the IV tendency, with the horizontal 'baroclinic' term producing and the vertical 'baroclinic' term reducing the IV. The other terms fluctuate around zero, because they are small in general or are balanced due to the domain average. The comparison of the results obtained for the four different ensembles (summers 2006, 2007, 2009 and 2012) reveals that on average the findings for each ensemble are quite similar concerning the magnitude and the general pattern of IV and its contributions. However, near the surface a weaker IV is produced with decreasing sea ice extent. This is caused by a smaller impact of the horizontal 'baroclinic' term over some regions and by the changing diabatic processes, particularly a more intense reducing tendency of the IV due to condensative heating. However, it has to be emphasised that the behaviour of the IV and its dynamical and diabatic contributions are influenced mainly by complex atmospheric feedbacks and large-scale processes and not by the sea ice distribution. Additionally, a comparison with a second RCM covering the Arctic and using the same LBCs and IC is performed. For both models very similar results concerning the IV and its dynamical and diabatic contributions are found. Hence, this investigation leads to the conclusion that the IV is a natural phenomenon and is independent from the applied RCM.},
  language  = {en}
}
@phdthesis{Steinhaus2014,
  author    = {Steinhaus, Sebastian Peter},
  title     = {Constructing quantum spacetime},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72558},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Despite remarkable progress made in the past century, which has revolutionized our understanding of the universe, there are numerous open questions left in theoretical physics. Particularly important is the fact that the theories describing the fundamental interactions of nature are incompatible. Einstein's theory of general relative describes gravity as a dynamical spacetime, which is curved by matter and whose curvature determines the motion of matter. On the other hand we have quantum field theory, in form of the standard model of particle physics, where particles interact via the remaining interactions - electromagnetic, weak and strong interaction - on a flat, static spacetime without gravity. A theory of quantum gravity is hoped to cure this incompatibility by heuristically replacing classical spacetime by quantum spacetime'. Several approaches exist attempting to define such a theory with differing underlying premises and ideas, where it is not clear which is to be preferred. Yet a minimal requirement is the compatibility with the classical theory, they attempt to generalize. Interestingly many of these models rely on discrete structures in their definition or postulate discreteness of spacetime to be fundamental. Besides the direct advantages discretisations provide, e.g. permitting numerical simulations, they come with serious caveats requiring thorough investigation: In general discretisations break fundamental diffeomorphism symmetry of gravity and are generically not unique. Both complicates establishing the connection to the classical continuum theory. The main focus of this thesis lies in the investigation of this relation for spin foam models. This is done on different levels of the discretisation / triangulation, ranging from few simplices up to the continuum limit. In the regime of very few simplices we confirm and deepen the connection of spin foam models to discrete gravity. Moreover, we discuss dynamical, e.g. diffeomorphism invariance in the discrete, to fix the ambiguities of the models. In order to satisfy these conditions, the discrete models have to be improved in a renormalisation procedure, which also allows us to study their continuum dynamics. Applied to simplified spin foam models, we uncover a rich, non--trivial fixed point structure, which we summarize in a phase diagram. Inspired by these methods, we propose a method to consistently construct the continuum theory, which comes with a unique vacuum state.},
  language  = {en}
}
@phdthesis{Cecchini2019,
  author    = {Cecchini, Gloria},
  title     = {Improving network inference by overcoming statistical limitations},
  doi       = {10.25932/publishup-42670},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426705},
  school      = {Universit{\"a}t Potsdam},
  pages     = {124},
  year      = {2019},
  abstract  = {A reliable inference of networks from data is of key interest in many scientific fields. Several methods have been suggested in the literature to reliably determine links in a network. These techniques rely on statistical methods, typically controlling the number of false positive links, but not considering false negative links. In this thesis new methodologies to improve network inference are suggested. Initial analyses demonstrate the impact of falsepositive and false negative conclusions about the presence or absence of links on the resulting inferred network. Consequently, revealing the importance of making well-considered choices leads to suggest new approaches to enhance existing network reconstruction methods. A simulation study, presented in Chapter 3, shows that different values to balance false positive and false negative conclusions about links should be used in order to reliably estimate network characteristics. The existence of type I and type II errors in the reconstructed network, also called biased network, is accepted. Consequently, an analytic method that describes the influence of these two errors on the network structure is explored. As a result of this analysis, an analytic formula of the density of the biased vertex degree distribution is found (Chapter 4). In the inverse problem, the vertex degree distribution of the true underlying network is analytically reconstructed, assuming the probabilities of type I and type II errors. Chapters 4-5 show that the method is robust to incorrect estimates of α and β within reasonable limits. In Chapter 6, an iterative procedure to enhance this method is presented in the case of large errors on the estimates of α and β. The investigations presented so far focus on the influence of false positive and false negative links on the network characteristics. In Chapter 7, the analysis is reversed - the study focuses on the influence of network characteristics on the probability of type I and type II errors, in the case of networks of coupled oscillators. The probabilities of α and β are influenced by the shortest path length and the detour degree, respectively. These results have been used to improve the network reconstruction, when the true underlying network is not known a priori, introducing a novel and advanced concept of threshold.},
  language  = {en}
}
@phdthesis{Leonhardt2017,
  author    = {Leonhardt, Helmar},
  title     = {Chemotaxis, shape and adhesion dynamics of amoeboid cells studied by impedance fluctuations in open and confined spaces},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-405016},
  school      = {Universit{\"a}t Potsdam},
  pages     = {98},
  year      = {2017},
  abstract  = {Die vorliegende Arbeit befasst sich mit elektrischen Impedanzmessungen von ameoboiden Zellen auf Mikroelektroden. Der Modellorganismus Dictyostelium discoideum zeigt unter der Bedingung des Nahrungsentzugs einen {\"U}bergang zum kollektiven Verhalten, bei dem sich chemotaktische Zellen zu einem multizellul{\"a}ren Aggregat zusammenschliessen. Wir zeigen wie Impedanzaufnahmen {\"u}ber die Dynamik der Zell-substrat Adh{\"a}sion ein pr{\"a}zises Bild der Phasen der Aggregation liefern. Dar{\"u}berhinaus zeigen wir zum ersten mal systematische Einzelzellmessungen von Wildtyp-Zellen und vier Mutanten, die sich in der St{\"a}rke der Substratadh {\"a}sion unterscheiden. Wir zeichneten die projizierte Zellfl{\"a}che durch Zeitverlaufsmikroskopie auf und fanden eine Korrelation zwischen den quasi-periodischen Oszillationen in der Kinetik der projizierten Fl{\"a}che - der Zellform-Oszillation - und dem Langzeittrend des Impedanzsignals. Amoeboidale Motilit{\"a}t offenbart sich typischerweise durch einen Zyklus von Membranausst{\"u}lpung, Substratadh{\"a}sion, Vorw{\"a}rtsziehen des Zellk{\"o}rpers und Einziehen des hinteren Teils der Zelle. Dieser Motilit{\"a}tszyklus resultiert in quasi-periodischen Oszillationen der projizierten Zellfl{\"a}che und der Impedanz. In allen gemessenen Zelllinien wurden f{\"u}r diesen Zyklus {\"a}hnliche Periodendauern beobachtet trotz der Unterschiede in der Anhaftungsst{\"a}rke. Wir beobachteten, dass die St{\"a}rke der Zell-substrat Anhaftung die Impedanz stark beeinflusst, indem die Abweichungen vom Mittelwert (die Gr{\"o}sse der Fluktuationen) vergr{\"o}ssert sind bei Zellen, die die vom Zytoskelett generierten Kr{\"a}fte effektiv auf das Substrat {\"u}bertragen. Zum Beispiel sind bei talA- Zellen, in welchen das Actin verankernde Protein Talin fehlt, die Fluktuationen stark reduziert. Einzelzellkraft-Spektroskopie und Ergebnisse eines Abl{\"o}sungsassays, bei dem Adh{\"a}sionskraft gemessen wird indem Zellen einer Scherspannung ausgesetzt werden, best{\"a}tigen, dass die Gr{\"o}sse der Impedanz-fluktuationen ein korrektes Mass f{\"u}r die St{\"a}rke der Substratadh{\"a}sion ist. Schliesslich haben wir uns auch mit dem Einbau von Zell-substrat-Impedanz-Sensoren in mikro-fluidische Apparaturen befasst. Ein chip-basierter elektrischer Chemotaxis Assay wurde entwickelt, der die Geschwindigkeit chemotaktischer Zellen misst, welche entlang eines chemischen Konzentrationsgradienten {\"u}ber Mikroelektroden wandern.},
  language  = {en}
}
@phdthesis{Ata2016,
  author    = {Ata, Metin},
  title     = {Phase-space reconstructions of cosmic velocities and the cosmic web},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-403565},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 155},
  year      = {2016},
  abstract  = {In the current paradigm of cosmology, the formation of large-scale structures is mainly driven by non-radiating dark matter, making up the dominant part of the matter budget of the Universe. Cosmological observations however, rely on the detection of luminous galaxies, which are biased tracers of the underlying dark matter. In this thesis I present cosmological reconstructions of both, the dark matter density field that forms the cosmic web, and cosmic velocities, for which both aspects of my work are delved into, the theoretical formalism and the results of its applications to cosmological simulations and also to a galaxy redshift survey.The foundation of our method is relying on a statistical approach, in which a given galaxy catalogue is interpreted as a biased realization of the underlying dark matter density field. The inference is computationally performed on a mesh grid by sampling from a probability density function, which describes the joint posterior distribution of matter density and the three dimensional velocity field. The statistical background of our method is described in Chapter "Implementation of argo", where the introduction in sampling methods is given, paying special attention to Markov Chain Monte-Carlo techniques. In Chapter "Phase-Space Reconstructions with N-body Simulations", I introduce and implement a novel biasing scheme to relate the galaxy number density to the underlying dark matter, which I decompose into a deterministic part, described by a non-linear and scale-dependent analytic expression, and a stochastic part, by presenting a negative binomial (NB) likelihood function that models deviations from Poissonity. Both bias components had already been studied theoretically, but were so far never tested in a reconstruction algorithm. I test these new contributions againstN-body simulations to quantify improvements and show that, compared to state-of-the-art methods, the stochastic bias is inevitable at wave numbers of k≥0.15h Mpc^-1 in the power spectrum in order to obtain unbiased results from the reconstructions. In the second part of Chapter "Phase-Space Reconstructions with N-body Simulations" I describe and validate our approach to infer the three dimensional cosmic velocity field jointly with the dark matter density. I use linear perturbation theory for the large-scale bulk flows and a dispersion term to model virialized galaxy motions, showing that our method is accurately recovering the real-space positions of the redshift-space distorted galaxies. I analyze the results with the isotropic and also the two-dimensional power spectrum.Finally, in Chapter "Phase-space Reconstructions with Galaxy Redshift Surveys", I show how I combine all findings and results and apply the method to the CMASS (for Constant (stellar) Mass) galaxy catalogue of the Baryon Oscillation Spectroscopic Survey (BOSS). I describe how our method is accounting for the observational selection effects inside our reconstruction algorithm. Also, I demonstrate that the renormalization of the prior distribution function is mandatory to account for higher order contributions in the structure formation model, and finally a redshift-dependent bias factor is theoretically motivated and implemented into our method. The various refinements yield unbiased results of the dark matter until scales of k≤0.2 h Mpc^-1in the power spectrum and isotropize the galaxy catalogue down to distances of r∼20h^-1 Mpc in the correlation function. We further test the results of our cosmic velocity field reconstruction by comparing them to a synthetic mock galaxy catalogue, finding a strong correlation between the mock and the reconstructed velocities. The applications of both, the density field without redshift-space distortions, and the velocity reconstructions, are very broad and can be used for improved analyses of the baryonic acoustic oscillations, environmental studies of the cosmic web, the kinematic Sunyaev-Zel'dovic or integrated Sachs-Wolfe effect.},
  language  = {en}
}
@phdthesis{FernandesGuimaraes2012,
  author    = {Fernandes Guimar{\~a}es, Ana Helena},
  title     = {How does adhesion influence the small aggregates in Saturn's rings},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-61846},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {Particles in Saturn's main rings range in size from dust to even kilometer-sized objects. Their size distribution is thought to be a result of competing accretion and fragmentation processes. While growth is naturally limited in tidal environments, frequent collisions among these objects may contribute to both accretion and fragmentation. As ring particles are primarily made of water ice attractive surface forces like adhesion could significantly influence these processes, finally determining the resulting size distribution. Here, we derive analytic expressions for the specific self-energy Q and related specific break-up energy Q⋆ of aggregates. These expressions can be used for any aggregate type composed of monomeric constituents. We compare these expressions to numerical experiments where we create aggregates of various types including: regular packings like the face-centered cubic (fcc), Ballistic Particle Cluster Aggregates (BPCA), and modified BPCAs including e.g. different constituent size distributions. We show that accounting for attractive surface forces such as adhesion a simple approach is able to: a) generally account for the size dependence of the specific break-up energy for fragmentation to occur reported in the literature, namely the division into "strength" and "gravity" regimes, and b) estimate the maximum aggregate size in a collisional ensemble to be on the order of a few meters, consistent with the maximum aggregate size observed in Saturn's rings of about 10m.},
  language  = {en}
}
@phdthesis{Makarava2012,
  author    = {Makarava, Natallia},
  title     = {Bayesian estimation of self-similarity exponent},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64099},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {Estimation of the self-similarity exponent has attracted growing interest in recent decades and became a research subject in various fields and disciplines. Real-world data exhibiting self-similar behavior and/or parametrized by self-similarity exponent (in particular Hurst exponent) have been collected in different fields ranging from finance and human sciencies to hydrologic and traffic networks. Such rich classes of possible applications obligates researchers to investigate qualitatively new methods for estimation of the self-similarity exponent as well as identification of long-range dependencies (or long memory). In this thesis I present the Bayesian estimation of the Hurst exponent. In contrast to previous methods, the Bayesian approach allows the possibility to calculate the point estimator and confidence intervals at the same time, bringing significant advantages in data-analysis as discussed in this thesis. Moreover, it is also applicable to short data and unevenly sampled data, thus broadening the range of systems where the estimation of the Hurst exponent is possible. Taking into account that one of the substantial classes of great interest in modeling is the class of Gaussian self-similar processes, this thesis considers the realizations of the processes of fractional Brownian motion and fractional Gaussian noise. Additionally, applications to real-world data, such as the data of water level of the Nile River and fixational eye movements are also discussed.},
  language  = {en}
}
@phdthesis{Eschenlohr2012,
  author    = {Eschenlohr, Andrea},
  title     = {Element-resolved ultrafast magnetization dynamics in ferromagnetic alloys and multilayers},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-62846},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {The microscopic origin of ultrafast demagnetization, i.e. the quenching of the magnetization of a ferromagnetic metal on a sub-picosecond timescale after laser excitation, is still only incompletely understood, despite a large body of experimental and theoretical work performed since the discovery of the effect more than 15 years ago. Time- and element-resolved x-ray magnetic circular dichroism measurements can provide insight into the microscopic processes behind ultrafast demagnetization as well as its dependence on materials properties. Using the BESSY II Femtoslicing facility, a storage ring based source of 100 fs short soft x-ray pulses, ultrafast magnetization dynamics of ferromagnetic NiFe and GdTb alloys as well as a Au/Ni layered structure were investigated in laser pump - x-ray probe experiments. After laser excitation, the constituents of Ni50Fe50 and Ni80Fe20 exhibit distinctly different time constants of demagnetization, leading to decoupled dynamics, despite the strong exchange interaction that couples the Ni and Fe sublattices under equilibrium conditions. Furthermore, the time constants of demagnetization for Ni and Fe are different in Ni50Fe50 and Ni80Fe20, and also different from the values for the respective pure elements. These variations are explained by taking the magnetic moments of the Ni and Fe sublattices, which are changed from the pure element values due to alloying, as well as the strength of the intersublattice exchange interaction into account. GdTb exhibits demagnetization in two steps, typical for rare earths. The time constant of the second, slower magnetization decay was previously linked to the strength of spin-lattice coupling in pure Gd and Tb, with the stronger, direct spin-lattice coupling in Tb leading to a faster demagnetization. In GdTb, the demagnetization of Gd follows Tb on all timescales. This is due to the opening of an additional channel for the dissipation of spin angular momentum to the lattice, since Gd magnetic moments in the alloy are coupled via indirect exchange interaction to neighboring Tb magnetic moments, which are in turn strongly coupled to the lattice. Time-resolved measurements of the ultrafast demagnetization of a Ni layer buried under a Au cap layer, thick enough to absorb nearly all of the incident pump laser light, showed a somewhat slower but still sub-picosecond demagnetization of the buried Ni layer in Au/Ni compared to a Ni reference sample. Supported by simulations, I conclude that demagnetization can thus be induced by transport of hot electrons excited in the Au layer into the Ni layer, without the need for direct interaction between photons and spins.},
  language  = {en}
}
@phdthesis{Ma2018,
  author    = {Ma, Siyuan},
  title     = {Analysis of Teukolsky equations on slowly rotating Kerr spacetimes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414781},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vi, 89},
  year      = {2018},
  abstract  = {In this thesis, we treat the extreme Newman-Penrose components of both the Maxwell field (s=±1) and the linearized gravitational perturbations (or "linearized gravity" for short) (s=±2) in the exterior of a slowly rotating Kerr black hole. Upon different rescalings, we can obtain spin s components which satisfy the separable Teukolsky master equation (TME). For each of these spin s components defined in Kinnersley tetrad, the resulting equations by performing some first-order differential operator on it once and twice (twice only for s=±2), together with the TME, are in the form of an "inhomogeneous spin-weighted wave equation" (ISWWE) with different potentials and constitute a linear spin-weighted wave system. We then prove energy and integrated local energy decay (Morawetz) estimates for this type of ISWWE, and utilize them to achieve both a uniform bound of a positive definite energy and a Morawetz estimate for the regular extreme Newman-Penrose components defined in the regular Hawking-Hartle tetrad. We also present some brief discussions on mode stability for TME for the case of real frequencies. This says that in a fixed subextremal Kerr spacetime, there is no nontrivial separated mode solutions to TME which are purely ingoing at horizon and purely outgoing at infinity. This yields a representation formula for solutions to inhomogeneous Teukolsky equations, and will play a crucial role in generalizing the above energy and Morawetz estimates results to the full subextremal Kerr case.},
  language  = {en}
}
@phdthesis{Schuermann2017,
  author    = {Sch{\"u}rmann, Robin Mathis},
  title     = {Interaction of the potential DNA-radiosensitizer 8-bromoadenine with free and plasmonically generated electrons},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407017},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 120},
  year      = {2017},
  abstract  = {In Germany more than 200.000 persons die of cancer every year, which makes it the second most common cause of death. Chemotherapy and radiation therapy are often combined to exploit a supra-additive effect, as some chemotherapeutic agents like halogenated nucleobases sensitize the cancerous tissue to radiation. The radiosensitizing action of certain therapeutic agents can be at least partly assigned to their interaction with secondary low energy electrons (LEEs) that are generated along the track of the ionizing radiation. In the therapy of cancer DNA is an important target, as severe DNA damage like double strand breaks induce the cell death. As there is only a limited number of radiosensitizing agents in clinical practice, which are often strongly cytotoxic, it would be beneficial to get a deeper understanding of the interaction of less toxic potential radiosensitizers with secondary reactive species like LEEs. Beyond that LEEs can be generated by laser illuminated nanoparticles that are applied in photothermal therapy (PTT) of cancer, which is an attempt to treat cancer by an increase of temperature in the cells. However, the application of halogenated nucleobases in PTT has not been taken into account so far. In this thesis the interaction of the potential radiosensitizer 8-bromoadenine (8BrA) with LEEs was studied. In a first step the dissociative electron attachment (DEA) in the gas phase was studied in a crossed electron-molecular beam setup. The main fragmentation pathway was revealed as the cleavage of the C-Br bond. The formation of a stable parent anion was observed for electron energies around 0 eV. Furthermore, DNA origami nanostructures were used as platformed to determine electron induced strand break cross sections of 8BrA sensitized oligonucleotides and the corresponding nonsensitized sequence as a function of the electron energy. In this way the influence of the DEA resonances observed for the free molecules on the DNA strand breaks was examined. As the surrounding medium influences the DEA, pulsed laser illuminated gold nanoparticles (AuNPs) were used as a nanoscale electron source in an aqueous environment. The dissociation of brominated and native nucleobases was tracked with UV-Vis absorption spectroscopy and the generated fragments were identified with surface enhanced Raman scattering (SERS). Beside the electron induced damage, nucleobase analogues are decomposed in the vicinity of the laser illuminatednanoparticles due to the high temperatures. In order to get a deeper understanding of the different dissociation mechanisms, the thermal decomposition of the nucleobases in these systems was studied and the influence of the adsorption kinetics of the molecules was elucidated. In addition to the pulsed laser experiments, a dissociative electron transfer from plasmonically generated "hot electrons" to 8BrA was observed under low energy continuous wave laser illumination and tracked with SERS. The reaction was studied on AgNPs and AuNPs as a function of the laser intensity and wavelength. On dried samples the dissociation of the molecule was described by fractal like kinetics. In solution, the dissociative electron transfer was observed as well. It turned out that the timescale of the reaction rates were slightly below typical integration times of Raman spectra. In consequence such reactions need to be taken into account in the interpretation of SERS spectra of electrophilic molecules. The findings in this thesis help to understand the interaction of brominated nucleobases with plasmonically generated electrons and free electrons. This might help to evaluate the potential radiosensitizing action of such molecules in cancer radiation therapy and PTT.},
  language  = {en}
}
@phdthesis{Wenz2016,
  author    = {Wenz, Leonie},
  title     = {Climate change impacts in an increasingly connected world},
  school      = {Universit{\"a}t Potsdam},
  pages     = {279},
  year      = {2016},
  language  = {en}
}
@phdthesis{Willner2018,
  author    = {Willner, Sven N.},
  title     = {Global economic response to flood damages under climate change},
  school      = {Universit{\"a}t Potsdam},
  pages     = {v, 247},
  year      = {2018},
  abstract  = {Climate change affects societies across the globe in various ways. In addition to gradual changes in temperature and other climatic variables, global warming is likely to increase intensity and frequency of extreme weather events. Beyond biophysical impacts, these also directly affect societal and economic activity. Additionally, indirect effects can occur; spatially, economic losses can spread along global supply-chains; temporally, climate impacts can change the economic development trajectory of countries. This thesis first examines how climate change alters river flood risk and its local socio-economic implications. Then, it studies the global economic response to river floods in particular, and to climate change in general. Changes in high-end river flood risk are calculated for the next three decades on a global scale with high spatial resolution. In order to account for uncertainties, this assessment makes use of an ensemble of climate and hydrological models as well as a river routing model, that is found to perform well regarding peak river discharge. The results show an increase in high-end flood risk in many parts of the world, which require profound adaptation efforts. This pressure to adapt is measured as the enhancement in protection level necessary to stay at historical high-end risk. In developing countries as well as in industrialized regions, a high pressure to adapt is observed - the former to increase low protection levels, the latter to maintain the low risk levels perceived in the past. Further in this thesis, the global agent-based dynamic supply-chain model acclimate is developed. It models the cascading of indirect losses in the global supply network. As an anomaly model its agents - firms and consumers - maximize their profit locally to respond optimally to local perturbations. Incorporating quantities as well as prices on a daily basis, it is suitable to dynamically resolve the impacts of unanticipated climate extremes. The model is further complemented by a static measure, which captures the inter-dependencies between sectors across regions that are only connected indirectly. These higher-order dependencies are shown to be important for a comprehensive assessment of loss-propagation and overall costs of local disasters. In order to study the economic response to river floods, the acclimate model is driven by flood simulations. Within the next two decades, the increase in direct losses can only partially be compensated by market adjustments, and total losses are projected to increase by 17\% without further adaptation efforts. The US and the EU are both shown to receive indirect losses from China, which is strongly affected directly. However, recent trends in the trade relations leave the EU in a better position to compensate for these losses. Finally, this thesis takes a broader perspective when determining the investment response to the climate change damages employing the integrated assessment model DICE. On an optimal economic development path, the increase in damages is anticipated as emissions and consequently temperatures increase. This leads to a significant devaluation of investment returns and the income losses from climate damages almost double. Overall, the results highlight the need to adapt to extreme weather events - local physical adaptation measures have to be combined with regional and global policy measures to prepare the global supply-chain network to climate change.},
  language  = {en}
}
@phdthesis{Littmann2024,
  author    = {Littmann, Daniela-Christin},
  title     = {Large eddy simulations of the Arctic boundary layer around the MOSAiC drift track},
  doi       = {10.25932/publishup-62437},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-624374},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xii, 110},
  year      = {2024},
  abstract  = {The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km. The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term. The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions. The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models.},
  language  = {en}
}
@phdthesis{Stechemesser2023,
  author    = {Stechemesser, Annika},
  title     = {Human behaviour in a warming world},
  school      = {Universit{\"a}t Potsdam},
  pages     = {339},
  year      = {2023},
  language  = {en}
}
@phdthesis{Sauter2016,
  author    = {Sauter, J{\"o}rg},
  title     = {The molecular origin of plant cell wall swelling},
  school      = {Universit{\"a}t Potsdam},
  pages     = {iii, 127 S.},
  year      = {2016},
  abstract  = {In dieser Arbeit werden die Eigenschaften von hydratisierten Hemicellulose Polysacchariden mittels Computersimulation untersucht. Die hohe Quellfähigkeit von Materialien die aus diesen Molek{\"u}len bestehen, erlaubt die Erzeugung von zielgerichteter Bewegung in Planzenmaterialien, ausschließlich gesteuert durch Wasseraufnahme. Um den molekularen Ursprung dieses Quellvermögens zu untersuchen wird, im Vergleich mit Experimenten, ein atomistisches Modell f{\"u}r Hemicellulose Polysaccharide entwickelt und getestet. Unter Verwendung dieses Modells werden Simulationen von kleinen Polysacchariden benutzt um die Wechselwirkungen mit Wasser, den Einfluss von Wasser auf die Konformationsfreiheit der Molek{\"u}le, und die Quellfähigkeit, quantifiziert durch den osmotischen Druck, zu verstehen. Es wird gezeigt, dass verzweigte und lineare Polysaccharide unterschiedliche Hydratisierungseingenschaften im Vergleich zu lineare Polysacchariden aufweisen. Um das Quellverhalten auf Längen- und Zeitskalen untersuchen zu können die {\"u}ber die Begrenzungen atomistischer Simulationen hinausgehen, wurde eine Prozedur entwickelt um {\"u}bertragbare vergröberte Modelle herzuleiten. Die Übertragbarkeit der vegröberten Modelle wird gezeigt, sowohl {\"u}ber unterschiedliche Polysaccharidkonzentrationen als auch {\"u}ber unterschiedliche Polymerlängen. Daher erlaubt die Prozedur die Konstruktion von großen vergröberter Systemen ausgehend von kleinen atomistischen Referenzsystemen. Abschließend wird das vergröberte Modell verwendet um zu zeigen, dass lineare und verzweigte Polysaccharide ein unterschiedliches Quellverhalten aufweisen, wenn sie mit einem Wasserbad gekoppelt werden.},
  language  = {en}
}
@phdthesis{Marwan2003,
  author    = {Marwan, Norbert},
  title     = {Encounters with neighbours},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000856},
  school      = {Universit{\"a}t Potsdam},
  year      = {2003},
  abstract  = {Diese Arbeit besch{\"a}ftigt sich mit verschiedenen Aspekten und Anwendungen von Recurrence Plots. Nach einer {\"U}bersicht {\"u}ber Methoden, die auf Recurrence Plots basieren, werden neue Komplexit{\"a}tsmaße eingef{\"u}hrt, die geometrische Strukturen in den Recurrence Plots beschreiben. Diese neuen Maße erlauben die Identifikation von Chaos-Chaos-{\"U}berg{\"a}ngen in dynamischen Prozessen. In einem weiteren Schritt werden Cross Recurrence Plots eingef{\"u}hrt, mit denen zwei verschiedene Prozesse untersucht werden. Diese bivariate Analyse erm{\"o}glicht die Bewertung von Unterschieden zwischen zwei Prozessen oder das Anpassen der Zeitskalen von zwei Zeitreihen. Diese Technik kann auch genutzt werden, um {\"a}hnliche Abschnitte in zwei verschiedenen Datenreihen zu finden. Im Anschluß werden diese neuen Entwicklungen auf Daten verschiedener Art angewendet. Methoden, die auf Recurrence Plots basieren, k{\"o}nnen an die speziellen Probleme angepaßt werden, so daß viele weitere Anwendungen m{\"o}glich sind. Durch die Anwendung der neu eingef{\"u}hrten Komplexit{\"a}tsmaße k{\"o}nnen Chaos-Chaos-{\"U}berg{\"a}nge in Herzschlagdaten vor dem Auftreten einer lebensbedrohlichen Herzrhythmusst{\"o}rung festgestellt werden, was f{\"u}r die Entwicklung neuer Therapien dieser Herzrhythmusst{\"o}rungen von Bedeutung sein k{\"o}nnte. In einem weiteren Beispiel, in dem EEG-Daten aus einem kognitiv orientierten Experiment untersucht werden, erm{\"o}glichen diese Komplexit{\"a}tsmaße das Erkennen von spezifischen Reaktionen im Gehirn bereits in Einzeltests. Normalerweise k{\"o}nnen diese Reaktionen erst durch die Auswertung von vielen Einzeltests erkannt werden. Mit der Hilfe von Cross Recurrence Plots wird die Existenz einer klimatischen Zirkulation, die der heutigen El Ni{\~n}o/ Southern Oscillation sehr {\"a}hnlich ist, im Nordwesten Argentiniens vor etwa 34000 Jahren nachgewiesen. Außerdem k{\"o}nnen mit Cross Recurrence Plots die Zeitskalen verschiedener Bohrlochdaten aufeinander abgeglichen werden. Diese Methode kann auch dazu genutzt werden, ein geologisches Profil mit Hilfe eines Referenzprofiles mit bekannter Zeitskala zu datieren. Weitere Beispiele aus den Gebieten der Molekularbiologie und der Spracherkennung unterstreichen das Potential dieser Methode.},
  language  = {en}
}
@phdthesis{Schroen2016,
  author    = {Schr{\"o}n, Martin},
  title     = {Cosmic-ray neutron sensing and its applications to soil and land surface hydrology},
  publisher = {Verlag Dr. Hut GmbH},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8439-3139-7},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-395433},
  school      = {Universit{\"a}t Potsdam},
  pages     = {223},
  year      = {2016},
  abstract  = {Water scarcity, adaption on climate change, and risk assessment of droughts and floods are critical topics for science and society these days. Monitoring and modeling of the hydrological cycle are a prerequisite to understand and predict the consequences for weather and agriculture. As soil water storage plays a key role for partitioning of water fluxes between the atmosphere, biosphere, and lithosphere, measurement techniques are required to estimate soil moisture states from small to large scales. The method of cosmic-ray neutron sensing (CRNS) promises to close the gap between point-scale and remote-sensing observations, as its footprint was reported to be 30 ha. However, the methodology is rather young and requires highly interdisciplinary research to understand and interpret the response of neutrons to soil moisture. In this work, the signal of nine detectors has been systematically compared, and correction approaches have been revised to account for meteorological and geomagnetic variations. Neutron transport simulations have been consulted to precisely characterize the sensitive footprint area, which turned out to be 6--18 ha, highly local, and temporally dynamic. These results have been experimentally confirmed by the significant influence of water bodies and dry roads. Furthermore, mobile measurements on agricultural fields and across different land use types were able to accurately capture the various soil moisture states. It has been further demonstrated that the corresponding spatial and temporal neutron data can be beneficial for mesoscale hydrological modeling. Finally, first tests with a gyrocopter have proven the concept of airborne neutron sensing, where increased footprints are able to overcome local effects. This dissertation not only bridges the gap between scales of soil moisture measurements. It also establishes a close connection between the two worlds of observers and modelers, and further aims to combine the disciplines of particle physics, geophysics, and soil hydrology to thoroughly explore the potential and limits of the CRNS method.},
  language  = {en}
}
@phdthesis{Stachlewska2005,
  author    = {Stachlewska, Iwona Sylwia},
  title     = {Investigation of tropospheric arctic aerosol and mixed-phase clouds using airborne lidar technique},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6984},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {An Airborne Mobile Aerosol Lidar (AMALi) was constructed and built at Alfred-Wegener-Institute for Polar and Marine Research (AWI) in Potsdam, Germany for the lower tropospheric aerosol and cloud research under tough arctic conditions. The system was successfully used during two AWI airborne field campaigns, ASTAR 2004 and SVALEX 2005, performed in vicinity of Spitsbergen in the Arctic. The novel evaluation schemes, the Two-Stream Inversion and the Iterative Airborne Inversion, were applied to the obtained lidar data. Thereby, calculation of the particle extinction and backscatter coefficient profiles with corresponding lidar ratio profiles characteristic for the arctic air was possible. The comparison of these lidar results with the results of other in-situ and remote instrumentation (ground based Koldewey Aerosol Raman Lidar (KARL), sunphotometer, radiosounding, satellite imagery) allowed to provided clean contra polluted (Arctic Haze) characteristics of the arctic aerosols. Moreover, the data interpretation by means of the ECMWF Operational Analyses and small-scale dispersion model EULAG allowed studying the effects of the Spitsbergens orography on the aerosol load in the Planetary Boundary Layer. With respect to the cloud studies a new methodology of alternated remote AMALi measurements with the airborne in-situ cloud optical and microphysical parameters measurements was proved feasible for the low density mixed-phase cloud studies. An example of such approach during observation of the natural cloud seeding (feeder-seeder phenomenon) with ice crystals precipitating into the lower supercooled stratocumulus deck were discussed in terms of the lidar signal intensity profiles and corresponding depolarisation ratio profiles. For parts of the cloud system characterised by almost negligible multiple scattering the calculation of the particle backscatter coefficient profiles was possible using the lidar ratio information obtained from the in-situ measurements in ice-crystal cloud and water cloud.},
  subject      = {Aerosol},
  language  = {en}
}
@phdthesis{Federici2014,
  author    = {Federici, Simone},
  title     = {Gamma-ray studies of the young shell-type SNR RX J1713.7-3946},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71734},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {One of the most significant current discussions in Astrophysics relates to the origin of high-energy cosmic rays. According to our current knowledge, the abundance distribution of the elements in cosmic rays at their point of origin indicates, within plausible error limits, that they were initially formed by nuclear processes in the interiors of stars. It is also believed that their energy distribution up to 1018 eV has Galactic origins. But even though the knowledge about potential sources of cosmic rays is quite poor above „ 1015 eV, that is the "knee" of the cosmic-ray spectrum, up to the knee there seems to be a wide consensus that supernova remnants are the most likely candidates. Evidence of this comes from observations of non-thermal X-ray radiation, requiring synchrotron electrons with energies up to 1014 eV, exactly in the remnant of supernovae. To date, however, there is not conclusive evidence that they produce nuclei, the dominant component of cosmic rays, in addition to electrons. In light of this dearth of evidence, γ-ray observations from supernova remnants can offer the most promising direct way to confirm whether or not these astrophysical objects are indeed the main source of cosmic-ray nuclei below the knee. Recent observations with space- and ground-based observatories have established shell-type supernova remnants as GeV-to- TeV γ-ray sources. The interpretation of these observations is however complicated by the different radiation processes, leptonic and hadronic, that can produce similar fluxes in this energy band rendering ambiguous the nature of the emission itself. The aim of this work is to develop a deeper understanding of these radiation processes from a particular shell-type supernova remnant, namely RX J1713.7-3946, using observations of the LAT instrument onboard the Fermi Gamma-Ray Space Telescope. Furthermore, to obtain accurate spectra and morphology maps of the emission associated with this supernova remnant, an improved model of the diffuse Galactic γ-ray emission background is developed. The analyses of RX J1713.7-3946 carried out with this improved background show that the hard Fermi-LAT spectrum cannot be ascribed to the hadronic emission, leading thus to the conclusion that the leptonic scenario is instead the most natural picture for the high-energy γ-ray emission of RX J1713.7-3946. The leptonic scenario however does not rule out the possibility that cosmic-ray nuclei are accelerated in this supernova remnant, but it suggests that the ambient density may not be high enough to produce a significant hadronic γ-ray emission. Further investigations involving other supernova remnants using the improved back- ground developed in this work could allow compelling population studies, and hence prove or disprove the origin of Galactic cosmic-ray nuclei in these astrophysical objects. A break- through regarding the identification of the radiation mechanisms could be lastly achieved with a new generation of instruments such as CTA.},
  language  = {en}
}
@phdthesis{Wieland2015,
  author    = {Wieland, Volkmar},
  title     = {Particle-in-cell simulations of perpendicular supernova shock fronts},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-74532},
  school      = {Universit{\"a}t Potsdam},
  pages     = {v, 89},
  year      = {2015},
  abstract  = {The origin of cosmic rays was the subject of several studies for over a century. The investigations done within this dissertation are one small step to shed some more light on this mystery. Locating the sources of cosmic rays is not trivial due to the interstellar magnetic field. However, the Hillas criterion allows us to arrive at the conclusion that supernova remnants are our main suspect for the origin of galactic cosmic rays. The mechanism by which they are accelerating particles is found within the field of shock physics as diffusive shock acceleration. To allow particles to enter this process also known as Fermi acceleration pre-acceleration processes like shock surfing acceleration and shock drift acceleration are necessary. Investigating the processes happening in the plasma shocks of supernova remnants is possible by utilising a simplified model which can be simulated on a computer using Particle-in-Cell simulations. We developed a new and clean setup to simulate the formation of a double shock, i.e., consisting of a forward and a reverse shock and a contact discontinuity, by the collision of two counter-streaming plasmas, in which a magnetic field can be woven into. In a previous work, we investigated the processes at unmagnetised and at magnetised parallel shocks, whereas in the current work, we move our investigation on to magnetised perpendicular shocks. Due to a much stronger confinement of the particles to the collision region the perpendicular shock develops much faster than the parallel shock. On the other hand, this leads to much weaker turbulence. We are able to find indications for shock surfing acceleration and shock drift acceleration happening at the two shocks leading to populations of pre-accelerated particles that are suitable as a seed population to be injected into further diffusive shock acceleration to be accelerated to even higher energies. We observe the development of filamentary structures in the shock ramp of the forward shock, but not at the reverse shock. This leads to the conclusion that the development of such structures in the shock ramp of quasi-perpendicular collisionless shocks might not necessarily be determined by the existence of a critical sonic Mach number but by a critical shock speed. The results of the investigations done within this dissertation might be useful for further studies of oblique shocks and for studies using hybrid or magnetohydrodynamic simulations. Together with more sophisticated observational methods, these studies will help to bring us closer to an answer as to how particles can be accelerated in supernova remnants and eventually become cosmic rays that can be detected on Earth.},
  language  = {en}
}
@phdthesis{Shaw2024,
  author    = {Shaw, Vasundhara},
  title     = {Cosmic-ray transport and signatures in their local environment},
  doi       = {10.25932/publishup-62019},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-620198},
  school      = {Universit{\"a}t Potsdam},
  pages     = {143},
  year      = {2024},
  abstract  = {The origin and structure of magnetic fields in the Galaxy are largely unknown. What is known is that they are essential for several astrophysical processes, in particular the propagation of cosmic rays. Our ability to describe the propagation of cosmic rays through the Galaxy is severely limited by the lack of observational data needed to probe the structure of the Galactic magnetic field on many different length scales. This is particularly true for modelling the propagation of cosmic rays into the Galactic halo, where our knowledge of the magnetic field is particularly poor. In the last decade, observations of the Galactic halo in different frequency regimes have revealed the existence of out-of-plane bubble emission in the Galactic halo. In gamma rays these bubbles have been termed Fermi bubbles with a radial extent of ≈ 3 kpc and an azimuthal height of ≈ 6 kpc. The radio counterparts of the Fermi bubbles were seen by both the S-PASS telescopes and the Planck satellite, and showed a clear spatial overlap. The X-ray counterparts of the Fermi bubbles were named eROSITA bubbles after the eROSITA satellite, with a radial width of ≈ 7 kpc and an azimuthal height of ≈ 14 kpc. Taken together, these observations suggest the presence of large extended Galactic Halo Bubbles (GHB) and have stimulated interest in exploring the less explored Galactic halo. In this thesis, a new toy model (GHB model) for the magnetic field and non-thermal electron distribution in the Galactic halo has been proposed. The new toy model has been used to produce polarised synchrotron emission sky maps. Chi-square analysis was used to compare the synthetic skymaps with the Planck 30 GHz polarised skymaps. The obtained constraints on the strength and azimuthal height were found to be in agreement with the S-PASS radio observations. The upper, lower and best-fit values obtained from the above chi-squared analysis were used to generate three separate toy models. These three models were used to propagate ultra-high energy cosmic rays. This study was carried out for two potential sources, Centaurus A and NGC 253, to produce magnification maps and arrival direction skymaps. The simulated arrival direction skymaps were found to be consistent with the hotspots of Centaurus A and NGC 253 as seen in the observed arrival direction skymaps provided by the Pierre Auger Observatory (PAO). The turbulent magnetic field component of the GHB model was also used to investigate the extragalactic dipole suppression seen by PAO. UHECRs with an extragalactic dipole were forward-tracked through the turbulent GHB model at different field strengths. The suppression in the dipole due to the varying diffusion coefficient from the simulations was noted. The results could also be compared with an analytical analogy of electrostatics. The simulations of the extragalactic dipole suppression were in agreement with similar studies carried out for galactic cosmic rays.},
  language  = {en}
}
@phdthesis{Steppa2022,
  author    = {Steppa, Constantin Beverly},
  title     = {Modelling the galactic population of very-high-energy gamma-ray sources},
  doi       = {10.25932/publishup-54947},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-549478},
  school      = {Universit{\"a}t Potsdam},
  pages     = {106},
  year      = {2022},
  abstract  = {The current generation of ground-based instruments has rapidly extended the limits of the range accessible to us with very-high-energy (VHE) gamma-rays, and more than a hundred sources have now been detected in the Milky Way. These sources represent only the tip of the iceberg, but their number has reached a level that allows population studies. In this work, a model of the global population of VHE gamma-ray sources based on the most comprehensive census of Galactic sources in this energy regime, the H.E.S.S. Galactic plane survey (HGPS), will be presented. A population synthesis approach was followed in the construction of the model. Particular attention was paid to correcting for the strong observational bias inherent in the sample of detected sources. The methods developed for estimating the model parameters have been validated with extensive Monte Carlo simulations and will be shown to provide unbiased estimates of the model parameters. With these methods, five models for different spatial distributions of sources have been constructed. To test the validity of these models, their predictions for the composition of sources within the sensitivity range of the HGPS are compared with the observed sample. With one exception, similar results are obtained for all spatial distributions, showing that the observed longitude profile and the source distribution over photon flux are in fair agreement with observation. Regarding the latitude profile and the source distribution over angular extent, it becomes apparent that the model needs to be further adjusted to bring its predictions in agreement with observation. Based on the model, predictions of the global properties of the Galactic population of VHE gamma-ray sources and the prospects of the Cherenkov Telescope Array (CTA) will be presented. CTA will significantly increase our knowledge of VHE gamma-ray sources by lowering the threshold for source detection, primarily through a larger detection area compared to current-generation instruments. In ground-based gamma-ray astronomy, the sensitivity of an instrument depends strongly, in addition to the detection area, on the ability to distinguish images of air showers produced by gamma-rays from those produced by cosmic rays, which are a strong background. This means that the number of detectable sources depends on the background rejection algorithm used and therefore may also be increased by improving the performance of such algorithms. In this context, in addition to the population model, this work presents a study on the application of deep-learning techniques to the task of gamma-hadron separation in the analysis of data from ground-based gamma-ray instruments. Based on a systematic survey of different neural-network architectures, it is shown that robust classifiers can be constructed with competitive performance compared to the best existing algorithms. Despite the broad coverage of neural-network architectures discussed, only part of the potential offered by the application of deep-learning techniques to the analysis of gamma-ray data is exploited in the context of this study. Nevertheless, it provides an important basis for further research on this topic.},
  language  = {en}
}
@phdthesis{KranjcHorvat2022,
  author    = {Kranjc Horvat, Anja},
  title     = {Particle physics in high-school education},
  doi       = {10.25932/publishup-56026},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-560260},
  school      = {Universit{\"a}t Potsdam},
  pages     = {137},
  year      = {2022},
  abstract  = {Elementary particle physics is a contemporary topic in science that is slowly being integrated into high-school education. These new implementations are challenging teachers' professional knowledge worldwide. Therefore, physics education research is faced with two important questions, namely, how can particle physics be integrated in high-school physics curricula and how best to support teachers in enhancing their professional knowledge on particle physics. This doctoral research project set up to provide better guidelines for answering these two questions by conducting three studies on high-school particle physics education. First, an expert concept mapping study was conducted to elicit experts' expectations on what high-school students should learn about particle physics. Overall, 13 experts in particle physics, computing, and physics education participated in 9 concept mapping rounds. The broad knowledge base of the experts ensured that the final expert concept map covers all major particle physics aspects. Specifically, the final expert concept map includes 180 concepts and examples, connected with 266 links and crosslinks. Among them are also several links to students' prior knowledge in topics such as mechanics and thermodynamics. The high interconnectedness of the concepts shows possible opportunities for including particle physics as a context for other curricular topics. As such, the resulting expert concept map is showcased as a well-suited tool for teachers to scaffold their instructional practice. Second, a review of 27 high-school physics curricula was conducted. The review uncovered which concepts related to particle physics can be identified in most curricula. Each curriculum was reviewed by two reviewers that followed a codebook with 60 concepts related to particle physics. The analysis showed that most curricula mention cosmology, elementary particles, and charges, all of which are considered theoretical particle physics concepts. None of the experimental particle physics concepts appeared in more than half of the reviewed curricula. Additional analysis was done on two curricular subsets, namely curricula with and curricula without an explicit particle physics chapter. Curricula with an explicit particle physics chapter mention several additional explicit particle physics concepts, namely the Standard Model of particle physics, fundamental interactions, antimatter research, and particle accelerators. The latter is an example of experimental particle physics concepts. Additionally, the analysis revealed that, overall, most curricula include Nature of Science and history of physics, albeit both are typically used as context or as a tool for teaching, respectively. Third, a Delphi study was conducted to investigate stakeholders' expectations regarding what teachers should learn in particle physics professional development programmes. Over 100 stakeholders from 41 countries represented four stakeholder groups, namely physics education researchers, research scientists, government representatives, and high-school teachers. The study resulted in a ranked list of the 13 most important topics to be included in particle physics professional development programmes. The highest-ranked topics are cosmology, the Standard Model, and real-life applications of particle physics. All stakeholder groups agreed on the overall ranking of the topics. While the highest-ranked topics are again more theoretical, stakeholders also expect teachers to learn about experimental particle physics topics, which are ranked as medium importance topics. The three studies addressed two research aims of this doctoral project. The first research aim was to explore to what extent particle physics is featured in high-school physics curricula. The comparison of the outcomes of the curricular review and the expert concept map showed that curricula cover significantly less than what experts expect high-school students to learn about particle physics. For example, most curricula do not include concepts that could be classified as experimental particle physics. However, the strong connections between the different concept show that experimental particle physics can be used as context for theoretical particle physics concepts, Nature of Science, and other curricular topics. In doing so, particle physics can be introduced in classrooms even though it is not (yet) explicitly mentioned in the respective curriculum. The second research aim was to identify which aspects of content knowledge teachers are expected to learn about particle physics. The comparison of the Delphi study results to the outcomes of the curricular review and the expert concept map showed that stakeholders generally expect teachers to enhance their school knowledge as defined by the curricula. Furthermore, teachers are also expected to enhance their deeper school knowledge by learning how to connect concepts from their school knowledge to other concepts in particle physics and beyond. As such, professional development programmes that focus on enhancing teachers' school knowledge and deeper school knowledge best support teachers in building relevant context in their instruction. Overall, this doctoral research project reviewed the current state of high-school particle physics education and provided guidelines for future enhancements of the particle physics content in high-school student and teacher education. The outcomes of the project support further implementations of particle physics in high-school education both as explicit content and as context for other curricular topics. Furthermore, the mixed-methods approach and the outcomes of this research project lead to several implications for professional development programmes and science education research, that are discussed in the final chapters of this dissertation.},
  language  = {en}
}
@phdthesis{Das2023,
  author    = {Das, Samata},
  title     = {Modelling particle acceleration in core-collapse supernova remnants inside circumstellar wind-blown bubbles},
  doi       = {10.25932/publishup-61414},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-614140},
  school      = {Universit{\"a}t Potsdam},
  pages     = {142},
  year      = {2023},
  abstract  = {Supernova remnants are considered to be the primary sources of galactic cosmic rays. These cosmic rays are assumed to be accelerated by the diffusive shock acceleration mechanism, specifically at shocks in the remnants. Particularly in the core-collapse scenario, these supernova remnant shocks expand inside the wind-blown bubbles structured by massive progenitors during their lifetime. Therefore, the complex environment of wind bubbles can influence the particle acceleration and radiation from the remnants. Further, the evolution of massive stars depends on their Zero Age Main Sequence mass, rotation, and metallicity. Consequently, the structures of the wind bubbles generated during the lifetime of massive stars should be considerably different. Hence, the particle acceleration in the core-collapse supernova remnants should vary, not only from the remnants evolving in the uniform environment but also from one another, depending on their progenitor stars. A core-collapse supernova remnant with a very massive 60 𝑀 ⊙ progenitor star has been considered to study the particle acceleration at the shock considering Bohm-like diffusion. This dissertation demonstrates the modification in particle acceleration and radiation while the remnant propagates through different regions of the wind bubble by impacts from the profiles of gas density, the temperature of the bubble and the magnetic field structure. Subsequently, in this thesis, I discuss the impacts of the non-identical ambient environment of core-collapse supernova remnants on particle spectra and the non-thermal emissions, considering 20 𝑀 ⊙ and 60 𝑀⊙ massive progenitors having different evolutionary tracks. Additionally, I also analyse the effect of cosmic ray streaming instabilities on particle spectra. To model the particle acceleration in the remnants, I have performed simulations in one-dimensional spherical symmetry using RATPaC code. The transport equation for cosmic rays and magnetic turbulence in test-particle approximation, along with the induction equation for the evolution of the large-scale magnetic field, have been solved simultaneously with the hydrodynamic equations for the expansion of remnants inside the pre-supernova circumstellar medium. The results from simulations describe that the spectra of accelerated particles in supernova remnants are regulated by density fluctuations, temperature variations, the large-scale magnetic field configuration and scattering turbulence. Although the diffusive shock acceleration mechanism at supernova remnant shock predicts the spectral index of 2 for the accelerated non-thermal particles, I have obtained the particle spectra that deviate from this prediction, in the core-collapse scenario. I have found that the particle spectral index reaches 2.5 for the supernova remnant with 60 𝑀 ⊙ progenitor when the remnant resides inside the shocked wind region of the wind bubble, and this softness persists at later evolutionary stages even with Bohm-like diffusion for accelerated particles. However, the supernova remnant with 20 𝑀 ⊙ progenitor does not demonstrate persistent softness in particle spectra from the influence of the hydrodynamics of the corresponding wind bubble. At later stages of evolution, the particle spectra illustrate softness at higher energies for both remnants as the consequence of the escape of high-energy particles from the remnants while considering the cosmic ray streaming instabilities. Finally, I have probed the emission morphology of remnants that varies depending on the progenitors, particularly in earlier evolutionary stages. This dissertation provides insight into different core-collapse remnants expanding inside wind bubbles, for instance, the calculated gamma-ray spectral index from the supernova remnant with 60 𝑀 ⊙ progenitor at later evolutionary stages is consistent with that of the observed supernova remnants expanding in dense molecular clouds.},
  language  = {en}
}
@phdthesis{Pfrang2023,
  author    = {Pfrang, Konstantin Johannes},
  title     = {Search for light primordial black holes with VERITAS using gamma γ-ray and optical observations},
  doi       = {10.25932/publishup-58726},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-587266},
  school      = {Universit{\"a}t Potsdam},
  pages     = {139},
  year      = {2023},
  abstract  = {The Very Energetic Radiation Imaging Telescope Array System (VERITAS) is an array of four imaging atmospheric Cherenkov telescopes (IACTs). VERITAS is sensitive to very-high-energy gamma-rays in the range of 100 GeV to >30 TeV. Hypothesized primordial black holes (PBHs) are attractive targets for IACTs. If they exist, their potential cosmological impact reaches beyond the candidacy for constituents of dark matter. The sublunar mass window is the largest unconstrained range of PBH masses. This thesis aims to develop novel concepts searching for light PBHs with VERITAS. PBHs below the sublunar window lose mass due to Hawking radiation. They would evaporate at the end of their lifetime, leading to a short burst of gamma-rays. If PBHs formed at about 10^15 g, the evaporation would occur nowadays. Detecting these signals might not only confirm the existence of PBHs but also prove the theory of Hawking radiation. This thesis probes archival VERITAS data recorded between 2012 and 2021 for possible PBH signals. This work presents a new automatic approach to assess the quality of the VERITAS data. The array-trigger rate and far infrared temperature are well suited to identify periods with poor data quality. These are masked by time cuts to obtain a consistent and clean dataset which contains about 4222 hours. The PBH evaporations could occur at any location in the field of view or time within this data. Only a blind search can be performed to identify these short signals. This thesis implements a data-driven deep learning based method to search for short transient signals with VERITAS. It does not depend on the modelling of the effective area and radial acceptance. This work presents the first application of this method to actual observational IACT data. This thesis develops new concepts dealing with the specifics of the data and the transient detection method. These are reflected in the developed data preparation pipeline and search strategies. After correction for trial factors, no candidate PBH evaporation is found in the data. Thus, new constraints of the local rate of PBH evaporations are derived. At the 99\% confidence limit it is below <1.07 * 10^5 pc^-3 yr^-1. This constraint with the new, independent analysis approach is in the range of existing limits for the evaporation rate. This thesis also investigates an alternative novel approach to searching for PBHs with IACTs. Above the sublunar window, the PBH abundance is constrained by optical microlensing studies. The sampling speed, which is of order of minutes to hours for traditional optical telescopes, is a limiting factor in expanding the limits to lower masses. IACTs are also powerful instruments for fast transient optical astronomy with up to O(ns) sampling. This thesis investigates whether IACTs might constrain the sublunar window with optical microlensing observations. This study confirms that, in principle, the fast sampling speed might allow extending microlensing searches into the sublunar mass window. However, the limiting factor for IACTs is the modest sensitivity to detect changes in optical fluxes. This thesis presents the expected rate of detectable events for VERITAS as well as prospects of possible future next-generation IACTs. For VERITAS, the rate of detectable microlensing events in the sublunar range is ~10^-6 per year of observation time. The future prospects for a 100 times more sensitive instrument are at ~0.05 events per year.},
  language  = {en}
}
@phdthesis{Brose2020,
  author    = {Brose, Robert},
  title     = {From dawn till dusk},
  doi       = {10.25932/publishup-47086},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-470865},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 146},
  year      = {2020},
  abstract  = {Supernova remnants are believed to be the source of cosmic rays with energies up to 10^15 eV that are produced within our Galaxy. The acceleration mechanism associated with the collision-less shocks in supernova remnants - diffusive shock acceleration - predicts a spectral index of the accelerated non-thermal particles of s = 2. However, measurements of non-thermal emission in radio, X-rays and gamma-rays reveal significant deviations of the particles spectral index from the canonical value of s = 2. The youngest Galactic supernova remnant G1.9+0.3 is an interesting target for next-generation gamma-ray observatories. So far, the remnant is only detected in the radio and the X-ray bands, but its young age of ≈100 yrs and inferred shock speed of ≈ 14, 000 km/s could make it an efficient particle accelerator. I performed spherical symmetric 1D simulations with the RATPaC code, in which I simultaneously solved the transport equation for cosmic rays, the transport equation for magnetic turbulence, and the hydro-dynamical equations for the gas flow. Separately computed distributions of the particles accelerated at the forward and the reverse shock were then used to calculate the spectra of synchrotron, inverse Compton, and Pion-decay radiation from the source. The emission from G1.9+0.3 can be self-consistently explained within the test-particle limit. I find that the X-ray flux is dominated by emission from the forward shock while most of the radio emission originates near the reverse shock, which makes G1.9+0.3 the first remnant with non-thermal radiation detected from the reverse shock. The flux of very-high-energy gamma-ray emission from G1.9+0.3 is expected to be close to the sensitivity threshold of the Cherenkov Telescope Array. The limited time available to grow large-scale turbulence limits the maximum energy of particles to values below 100 TeV, hence G1.9+0.3 is not a PeVatron. Although there are many models for the acceleration of cosmic rays in Supernova remnants, the escape of cosmic rays from these sources is yet understudied. I use our time-dependent acceleration code RATPaC to study the acceleration of cosmic rays and their escape in post-adiabatic Supernova remnants and calculate the subsequent gamma-ray emission from inverse-Compton scattering and Pion decay. My simulations span 100,000 years, thus covering the free-expansion, the Sedov-Taylor, and the beginning of the post-adiabatic phase of the remnant's evolution. At later stages of the evolution cosmic rays over a wide range of energy can reside outside of the remnant, creating spectra that are softer than predicted by standard diffusive shock acceleration and feature breaks in the 10 - 100 GeV-range. The total spectrum of cosmic rays released into the interstellar medium has a spectral index of s ≈ 2.4 above roughly 10 GeV which is close to that required by Galactic propagation models. I further find the gamma-ray luminosity to peak around an age of 4,000 years for inverse-Compton-dominated high-energy emission. Remnants expanding in low-density media emit generally more inverse-Compton radiation matching the fact that the brightest known supernova remnants - RCW86, Vela Jr, HESSJ1721-347 and RXJ1713.7-3946 - are all expanding in low density environments. The importance of feedback from the cosmic-rays on the hydrodynamical evolution of the remnants is debated as a possibility to obtain soft cosmic-ray spectra at low energies. I performed spherically symmetric 1-D simulations with a modified version of the RATPaC code, in which I simultaneously solve the transport equation for cosmic rays and the hydrodynamical equations, including the back-reaction of the cosmic-ray pressure on the flow profiles. Besides the known modification of the flow profiles and the consequently curved cosmic-ray spectra, steady-state models for non-linear diffusive shock acceleration overpredict the total compression ratio that can be reached with cosmic-ray feedback, as there is limited time for building these modifications. Further, I find modifications to the downstream flow structure that change the evolutionary behavior of the remnant and trigger a cosmic-ray-induced instability close to the contact discontinuity, if and when the cosmic-ray pressure becomes dominant there.},
  language  = {en}
}
@phdthesis{Hakansson2017,
  author    = {H{\aa}kansson, Nils},
  title     = {A Dark Matter line search using 3D-modeling of Cherenkov showers below 10 TeV with VERITAS},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-397670},
  school      = {Universit{\"a}t Potsdam},
  pages     = {107, xxxvi},
  year      = {2017},
  abstract  = {Dark matter, DM, has not yet been directly observed, but it has a very solid theoretical basis. There are observations that provide indirect evidence, like galactic rotation curves that show that the galaxies are rotating too fast to keep their constituent parts, and galaxy clusters that bends the light coming from behind-lying galaxies more than expected with respect to the mass that can be calculated from what can be visibly seen. These observations, among many others, can be explained with theories that include DM. The missing piece is to detect something that can exclusively be explained by DM. Direct observation in a particle accelerator is one way and indirect detection using telescopes is another. This thesis is focused on the latter method. The Very Energetic Radiation Imaging Telescope Array System, V ERITAS, is a telescope array that detects Cherenkov radiation. Theory predicts that DM particles annihilate into, e.g., a γγ pair and create a distinctive energy spectrum when detected by such telescopes, e.i., a monoenergetic line at the same energy as the particle mass. This so called "smoking-gun" signature is sought with a sliding window line search within the sub-range ∼ 0.3 - 10 TeV of the VERITAS energy range, ∼ 0.01 - 30 TeV. Standard analysis within the VERITAS collaboration uses Hillas analysis and look-up tables, acquired by analysing particle simulations, to calculate the energy of the particle causing the Cherenkov shower. In this thesis, an improved analysis method has been used. Modelling each shower as a 3Dgaussian should increase the energy recreation quality. Five dwarf spheroidal galaxies were chosen as targets with a total of ∼ 224 hours of data. The targets were analysed individually and stacked. Particle simulations were based on two simulation packages, CARE and GrISU. Improvements have been made to the energy resolution and bias correction, up to a few percent each, in comparison to standard analysis. Nevertheless, no line with a relevant significance has been detected. The most promising line is at an energy of ∼ 422 GeV with an upper limit cross section of 8.10 · 10^-24 cm^3 s^-1 and a significance of ∼ 2.73 σ, before trials correction and ∼ 1.56 σ after. Upper limit cross sections have also been calculated for the γγ annihilation process and four other outcomes. The limits are in line with current limits using other methods, from ∼ 8.56 · 10^-26 - 6.61 · 10^-23 cm^3s^-1. Future larger telescope arrays, like the upcoming Cherenkov Telescope Array, CTA, will provide better results with the help of this analysis method.},
  language  = {en}
}
@phdthesis{Imperia2002,
  author    = {Imperia, Paolo},
  title     = {Localised states in organic semiconductors and their detection},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000477},
  school      = {Universit{\"a}t Potsdam},
  year      = {2002},
  abstract  = {In den letzten Jahren ist eine Vielzahl neuer organischer Polymere und niedermolekularer Verbindungen synthetisiert worden, die sich als aktive Komponente f{\"u}r Elektrolumineszenz-Bauelemente und andere elektronische Anwendungen eignen. Trotz der großen technologischen Bedeutung und des erheblichen Fortschrittes, der bei der Herstellung solcher Materialien erzielt worden ist, sind grundlegende physikalische Eigenschaften dieser Materialklassen noch nicht ausreichend erforscht. Insbesondere das Auftreten lokalisierter Zust{\"a}nde innerhalb der Bandl{\"u}cke hat besondere Bedeutung f{\"u}r ihre elektronischen Eigenschaften. Sowohl die Pr{\"a}senz dieser flachen traps (Fallen, L{\"o}cher) als auch der Einfluß der Herstellungsbedingungen auf die tiefen und flachen lokalisierten Zust{\"a}nde wurden bisher nicht systematisch untersucht. Thermische Techniken sind wichtige Methoden, um lokalisierte Niveaus in organischen und anorganischen Materialien zu erforschen. Themisch-Stimulierte Lumineszenz (TSL), Thermisch-Stimulierte Str{\"o}me (TSC) und Thermisch-Stimulierte Depolarisierte Str{\"o}me (TSDC) erm{\"o}glichen die Untersuchung flacher und tiefer traps; in Verbindung mit DiElektrischer Spektroskopie (DES) k{\"o}nnen außerdem Polarisations- und Depolarisationseffekte studiert werden. Mit Hilfe numerischer Simulationen haben wir die kinetischen Gleichungen erster und zweiter Ordnung untersucht, die sich durch schwaches bzw. starkes Wieder-Fangen beschreiben lassen. In diesen Gleichungen haben wir Gaussian-, exponentielle und quasi-kontinuierliche Verteilungen von lokalisierten Zust{\"a}nde ber{\"u}cksichtigt. Durch Ver{\"a}nderung der beiden wichtigsten Parameter (Tiefe der traps E und H{\"a}ufigkeit) konnte die Form der thermischen Maxima untersucht werden. Auch die die Gaussian-Verteilung bestimmenden Faktoren wurden ver{\"a}ndert. Diese theoretischen Ergebnisse wurden auf die experimentellen Glow-Kurven angewandt. D{\"u}nne Filme aus polymeren und niedermolekularen Verbindungen (Polyphenylquinoxaline, Trisphenylquinoxaline und Oxadiazole), die wegen ihrer technologischen Bedeutung ausgew{\"a}hlt wurden, zeigen komplexes thermisches Verhalten. Insbesondere hoch geordnete Filme eines amphiphil substituierten 2-(p-nitrophenyl)-5-(p-undecylamidophenyl)-1,3,4-oxadiazols (NADPO) zeichnen sich durch komplexe TSL-Diagramme aus. Im Bereich von Em = 4 meV wurde eine Region flacher traps gefunden. Zwei weitere TSL-Maxima treten bei Tm = 221.5 K bzw. Tm = 254.2 K auf. Sie besitzen Aktivierungsenergien von Em= 0.63 eV bzw. Em = 0.66 eV, ihre Frequenzfaktoren betragen s = 2.4x1012 s-1 bzw. s = 1.85x1011 s-1, sie zeigen Breiten der Verteilung von s = 0.045 eV bzw. s = 0.088 eV. Des weiteren zeigt diese Arbeit, daß die Form der Glow-Kurven stark von der Anregungstemperatur und vom thermischen Kreislauf beeinflußt wird.},
  language  = {en}
}