@phdthesis{Tukhlina2008, author = {Tukhlina, Natalia}, title = {Feedback control of complex oscillatory systems}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-18546}, school = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {In the present dissertation paper an approach which ensures an efficient control of such diverse systems as noisy or chaotic oscillators and neural ensembles is developed. This approach is implemented by a simple linear feedback loop. The dissertation paper consists of two main parts. One part of the work is dedicated to the application of the suggested technique to a population of neurons with a goal to suppress their synchronous collective dynamics. The other part is aimed at investigating linear feedback control of coherence of a noisy or chaotic self-sustained oscillator. First we start with a problem of suppressing synchronization in a large population of interacting neurons. The importance of this task is based on the hypothesis that emergence of pathological brain activity in the case of Parkinson's disease and other neurological disorders is caused by synchrony of many thousands of neurons. The established therapy for the patients with such disorders is a permanent high-frequency electrical stimulation via the depth microelectrodes, called Deep Brain Stimulation (DBS). In spite of efficiency of such stimulation, it has several side effects and mechanisms underlying DBS remain unclear. In the present work an efficient and simple control technique is suggested. It is designed to ensure suppression of synchrony in a neural ensemble by a minimized stimulation that vanishes as soon as the tremor is suppressed. This vanishing-stimulation technique would be a useful tool of experimental neuroscience; on the other hand, control of collective dynamics in a large population of units represents an interesting physical problem. The main idea of suggested approach is related to the classical problem of oscillation theory, namely the interaction between a self-sustained (active) oscillator and a passive load (resonator). It is known that under certain conditions the passive oscillator can suppress the oscillations of an active one. In this thesis a much more complicated case of active medium, which itself consists of thousands of oscillators is considered. Coupling this medium to a specially designed passive oscillator, one can control the collective motion of the ensemble, specifically can enhance or suppress it. Having in mind a possible application in neuroscience, the problem of suppression is concentrated upon. Second, the efficiency of suggested suppression scheme is illustrated by considering more complex case, i.e. when the population of neurons generating the undesired rhythm consists of two non-overlapping subpopulations: the first one is affected by the stimulation, while the collective activity is registered from the second one. Generally speaking, the second population can be by itself both active and passive; both cases are considered here. The possible applications of suggested technique are discussed. Third, the influence of the external linear feedback on coherence of a noisy or chaotic self-sustained oscillator is considered. Coherence is one of the main properties of self-oscillating systems and plays a key role in the construction of clocks, electronic generators, lasers, etc. The coherence of a noisy limit cycle oscillator in the context of phase dynamics is evaluated by the phase diffusion constant, which is in its turn proportional to the width of the spectral peak of oscillations. Many chaotic oscillators can be described within the framework of phase dynamics, and, therefore, their coherence can be also quantified by the way of the phase diffusion constant. The analytical theory for a general linear feedback, considering noisy systems in the linear and Gaussian approximation is developed and validated by numerical results.}, language = {en} } @phdthesis{Chirvasa2010, author = {Chirvasa, Mihaela}, title = {Finite difference methods for 1st Order in time, 2nd order in space, hyperbolic systems used in numerical relativity}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-42135}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {This thesis is concerned with the development of numerical methods using finite difference techniques for the discretization of initial value problems (IVPs) and initial boundary value problems (IBVPs) of certain hyperbolic systems which are first order in time and second order in space. This type of system appears in some formulations of Einstein equations, such as ADM, BSSN, NOR, and the generalized harmonic formulation. For IVP, the stability method proposed in [14] is extended from second and fourth order centered schemes, to 2n-order accuracy, including also the case when some first order derivatives are approximated with off-centered finite difference operators (FDO) and dissipation is added to the right-hand sides of the equations. For the model problem of the wave equation, special attention is paid to the analysis of Courant limits and numerical speeds. Although off-centered FDOs have larger truncation errors than centered FDOs, it is shown that in certain situations, off-centering by just one point can be beneficial for the overall accuracy of the numerical scheme. The wave equation is also analyzed in respect to its initial boundary value problem. All three types of boundaries - outflow, inflow and completely inflow that can appear in this case, are investigated. Using the ghost-point method, 2n-accurate (n = 1, 4) numerical prescriptions are prescribed for each type of boundary. The inflow boundary is also approached using the SAT-SBP method. In the end of the thesis, a 1-D variant of BSSN formulation is derived and some of its IBVPs are considered. The boundary procedures, based on the ghost-point method, are intended to preserve the interior 2n-accuracy. Numerical tests show that this is the case if sufficient dissipation is added to the rhs of the equations.}, language = {en} } @phdthesis{Kruesemann2016, author = {Kr{\"u}semann, Henning}, title = {First passage phenomena and single-file motion in ageing continuous time random walks and quenched energy landscapes}, school = {Universit{\"a}t Potsdam}, pages = {122}, year = {2016}, abstract = {In der Physik gibt es viele Prozesse, die auf Grund ihrer Komplexit{\"a}t nicht durch physikalische Gleichungen beschrieben werden k{\"o}nnen, beispielsweise die Bewegung eines Staubkorns in der Luft. Durch die vielen St{\"o}ße mit Luftmolek{\"u}len f{\"u}hrt es eine Zufallsbewegung aus, die so genannte Diffusion. Auch Molek{\"u}le in biologischen Zellen diffundieren, jedoch befinden sich in einer solchen Zelle im selben Volumen viel mehr oder viel gr{\"o}ßere Molek{\"u}le. Das beobachtete Teilchen st{\"o}ßt dementsprechend {\"o}fter mit anderen zusammen und die Diffusion wird langsamer, sie wird subdiffusiv. Mit der Zeit kann sich die Charakteristik der Subdiffusion {\"a}ndern; dies wird als (mikroskopisches) Altern bezeichnet. Ich untersuche in der vorliegenden Arbeit zwei mathematische Modelle f{\"u}r eindimensionale Subdiffusion, einmal den continuous time random walk (CTRW) und einmal die Zufallsbewegung in einer eingefrorenen Energielandschaft (QEL=quenched energy landscape). Beide sind Sprungprozesse, das heißt, sie sind Abfolgen von r{\"a}umlichen Spr{\"u}ngen, die durch zufallsverteilte Wartezeiten getrennt sind. Die Wartezeiten in der QEL sind r{\"a}umlich korrelliert, w{\"a}hrend sie im CTRW unkorrelliert sind. Ich untersuche in der vorliegenden Arbeit verschiedene statistische Gr{\"o}ßen in beiden Modellen. Zun{\"a}chst untersuche ich den Einfluss des Alters und den Einfluss der Korrellationen einer QEL auf die Verteilung der Zeiten, die das diffundierendes Teilchen ben{\"o}tigt, um eine (r{\"a}umliche) Schwelle zu {\"u}berqueren. Ausserdem bestimme ich den Effekt des Alters auf Str{\"o}me von (sub)diffundierenden Partikeln, die sich auf eine absorbierende Barriere zubewegen. Zuletzt besch{\"a}ftige ich mich mit der Diffusion einer eindimensionalen Anordnung von Teilchen in einer QEL, in der diese als harte Kugeln miteinander wechselwirken. Dabei vergleiche ich die gemeinsame Bewegung in einer QEL und als individuelle CTRWs miteinander {\"u}ber die Standartabweichung von der Startposition, f{\"u}r die ich das Mittel {\"u}ber mehrere QELs untersuche. Meine Arbeit setzt sich zusammen aus theoretischen {\"U}berlegungen und Berechnungen sowie der Simulation der Zufallsprozesse. Die Ergebnisse der Simulation und, soweit vorhanden, experimentelle Daten werden mit der Theorie verglichen.}, language = {en} } @phdthesis{Haakh2012, author = {Haakh, Harald Richard}, title = {Fluctuation-mediated interactions of atoms and surfaces on a mesoscopic scale}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-61819}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {Thermal and quantum fluctuations of the electromagnetic near field of atoms and macroscopic bodies play a key role in quantum electrodynamics (QED), as in the Lamb shift. They lead, e.g., to atomic level shifts, dispersion interactions (Van der Waals-Casimir-Polder interactions), and state broadening (Purcell effect) because the field is subject to boundary conditions. Such effects can be observed with high precision on the mesoscopic scale which can be accessed in micro-electro-mechanical systems (MEMS) and solid-state-based magnetic microtraps for cold atoms ('atom chips'). A quantum field theory of atoms (molecules) and photons is adapted to nonequilibrium situations. Atoms and photons are described as fully quantized while macroscopic bodies can be included in terms of classical reflection amplitudes, similar to the scattering approach of cavity QED. The formalism is applied to the study of nonequilibrium two-body potentials. We then investigate the impact of the material properties of metals on the electromagnetic surface noise, with applications to atomic trapping in atom-chip setups and quantum computing, and on the magnetic dipole contribution to the Van der Waals-Casimir-Polder potential in and out of thermal equilibrium. In both cases, the particular properties of superconductors are of high interest. Surface-mode contributions, which dominate the near-field fluctuations, are discussed in the context of the (partial) dynamic atomic dressing after a rapid change of a system parameter and in the Casimir interaction between two conducting plates, where nonequilibrium configurations can give rise to repulsion.}, language = {en} } @phdthesis{Faber2014, author = {Faber, Michael}, title = {Folding dynamics of RNA secondary structures}, pages = {85}, year = {2014}, language = {en} } @phdthesis{Goldshteyn2014, author = {Goldshteyn, Jewgenij}, title = {Frequency-resolved ultrafast dynamics of phonon polariton wavepackets in the ferroelectric crystals LiNbO₃ and LiTaO₃}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-71623}, school = {Universit{\"a}t Potsdam}, year = {2014}, abstract = {During this work I built a four wave mixing setup for the time-resolved femtosecond spectroscopy of Raman-active lattice modes. This setup enables to study the selective excitation of phonon polaritons. These quasi-particles arise from the coupling of electro-magnetic waves and transverse optical lattice modes, the so-called phonons. The phonon polaritons were investigated in the optically non-linear, ferroelectric crystals LiNbO₃ and LiTaO₃. The direct observation of the frequency shift of the scattered narrow bandwidth probe pulses proofs the role of the Raman interaction during the probe and excitation process of phonon polaritons. I compare this experimental method with the measurement where ultra-short laser pulses are used. The frequency shift remains obscured by the relative broad bandwidth of these laser pulses. In an experiment with narrow bandwidth probe pulses, the Stokes and anti-Stokes intensities are spectrally separated. They are assigned to the corresponding counter-propagating wavepackets of phonon polaritons. Thus, the dynamics of these wavepackets was separately studied. Based on these findings, I develop the mathematical description of the so-called homodyne detection of light for the case of light scattering from counter propagating phonon polaritons. Further, I modified the broad bandwidth of the ultra-short pump pulses using bandpass filters to generate two pump pulses with non-overlapping spectra. This enables the frequency-selective excitation of polariton modes in the sample, which allows me to observe even very weak polariton modes in LiNbO₃ or LiTaO₃ that belong to the higher branches of the dispersion relation of phonon polaritons. The experimentally determined dispersion relation of the phonon polaritons could therefore be extended and compared to theoretical models. In addition, I determined the frequency-dependent damping of phonon polaritons.}, language = {en} } @phdthesis{Brose2020, author = {Brose, Robert}, title = {From dawn till dusk}, doi = {10.25932/publishup-47086}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-470865}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 146}, year = {2020}, abstract = {Supernova remnants are believed to be the source of cosmic rays with energies up to 10^15 eV that are produced within our Galaxy. The acceleration mechanism associated with the collision-less shocks in supernova remnants - diffusive shock acceleration - predicts a spectral index of the accelerated non-thermal particles of s = 2. However, measurements of non-thermal emission in radio, X-rays and gamma-rays reveal significant deviations of the particles spectral index from the canonical value of s = 2. The youngest Galactic supernova remnant G1.9+0.3 is an interesting target for next-generation gamma-ray observatories. So far, the remnant is only detected in the radio and the X-ray bands, but its young age of ≈100 yrs and inferred shock speed of ≈ 14, 000 km/s could make it an efficient particle accelerator. I performed spherical symmetric 1D simulations with the RATPaC code, in which I simultaneously solved the transport equation for cosmic rays, the transport equation for magnetic turbulence, and the hydro-dynamical equations for the gas flow. Separately computed distributions of the particles accelerated at the forward and the reverse shock were then used to calculate the spectra of synchrotron, inverse Compton, and Pion-decay radiation from the source. The emission from G1.9+0.3 can be self-consistently explained within the test-particle limit. I find that the X-ray flux is dominated by emission from the forward shock while most of the radio emission originates near the reverse shock, which makes G1.9+0.3 the first remnant with non-thermal radiation detected from the reverse shock. The flux of very-high-energy gamma-ray emission from G1.9+0.3 is expected to be close to the sensitivity threshold of the Cherenkov Telescope Array. The limited time available to grow large-scale turbulence limits the maximum energy of particles to values below 100 TeV, hence G1.9+0.3 is not a PeVatron. Although there are many models for the acceleration of cosmic rays in Supernova remnants, the escape of cosmic rays from these sources is yet understudied. I use our time-dependent acceleration code RATPaC to study the acceleration of cosmic rays and their escape in post-adiabatic Supernova remnants and calculate the subsequent gamma-ray emission from inverse-Compton scattering and Pion decay. My simulations span 100,000 years, thus covering the free-expansion, the Sedov-Taylor, and the beginning of the post-adiabatic phase of the remnant's evolution. At later stages of the evolution cosmic rays over a wide range of energy can reside outside of the remnant, creating spectra that are softer than predicted by standard diffusive shock acceleration and feature breaks in the 10 - 100 GeV-range. The total spectrum of cosmic rays released into the interstellar medium has a spectral index of s ≈ 2.4 above roughly 10 GeV which is close to that required by Galactic propagation models. I further find the gamma-ray luminosity to peak around an age of 4,000 years for inverse-Compton-dominated high-energy emission. Remnants expanding in low-density media emit generally more inverse-Compton radiation matching the fact that the brightest known supernova remnants - RCW86, Vela Jr, HESSJ1721-347 and RXJ1713.7-3946 - are all expanding in low density environments. The importance of feedback from the cosmic-rays on the hydrodynamical evolution of the remnants is debated as a possibility to obtain soft cosmic-ray spectra at low energies. I performed spherically symmetric 1-D simulations with a modified version of the RATPaC code, in which I simultaneously solve the transport equation for cosmic rays and the hydrodynamical equations, including the back-reaction of the cosmic-ray pressure on the flow profiles. Besides the known modification of the flow profiles and the consequently curved cosmic-ray spectra, steady-state models for non-linear diffusive shock acceleration overpredict the total compression ratio that can be reached with cosmic-ray feedback, as there is limited time for building these modifications. Further, I find modifications to the downstream flow structure that change the evolutionary behavior of the remnant and trigger a cosmic-ray-induced instability close to the contact discontinuity, if and when the cosmic-ray pressure becomes dominant there.}, language = {en} } @phdthesis{Sauter2015, author = {Sauter, Tilman}, title = {Function by structure}, school = {Universit{\"a}t Potsdam}, pages = {166}, year = {2015}, language = {en} } @phdthesis{Schroeder2024, author = {Schr{\"o}der, Jakob}, title = {Fundamentals of diffraction-based residual stress and texture analysis of laser powder bed fused Inconel 718}, doi = {10.25932/publishup-62197}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-621972}, school = {Universit{\"a}t Potsdam}, pages = {XVII, 135}, year = {2024}, abstract = {Additive manufacturing (AM) processes enable the production of metal structures with exceptional design freedom, of which laser powder bed fusion (PBF-LB) is one of the most common. In this process, a laser melts a bed of loose feedstock powder particles layer-by-layer to build a structure with the desired geometry. During fabrication, the repeated melting and rapid, directional solidification create large temperature gradients that generate large thermal stress. This thermal stress can itself lead to cracking or delamination during fabrication. More often, large residual stresses remain in the final part as a footprint of the thermal stress. This residual stress can cause premature distortion or even failure of the part in service. Hence, knowledge of the residual stress field is critical for both process optimization and structural integrity. Diffraction-based techniques allow the non-destructive characterization of the residual stress fields. However, such methods require a good knowledge of the material of interest, as certain assumptions must be made to accurately determine residual stress. First, the measured lattice plane spacings must be converted to lattice strains with the knowledge of a strain-free material state. Second, the measured lattice strains must be related to the macroscopic stress using Hooke's law, which requires knowledge of the stiffness of the material. Since most crystal structures exhibit anisotropic material behavior, the elastic behavior is specific to each lattice plane of the single crystal. Thus, the use of individual lattice planes in monochromatic diffraction residual stress analysis requires knowledge of the lattice plane-specific elastic properties. In addition, knowledge of the microstructure of the material is required for a reliable assessment of residual stress. This work presents a toolbox for reliable diffraction-based residual stress analysis. This is presented for a nickel-based superalloy produced by PBF-LB. First, this work reviews the existing literature in the field of residual stress analysis of laser-based AM using diffraction-based techniques. Second, the elastic and plastic anisotropy of the nickel-based superalloy Inconel 718 produced by PBF-LB is studied using in situ energy dispersive synchrotron X-ray and neutron diffraction techniques. These experiments are complemented by ex situ material characterization techniques. These methods establish the relationship between the microstructure and texture of the material and its elastic and plastic anisotropy. Finally, surface, sub-surface, and bulk residual stress are determined using a texture-based approach. Uncertainties of different methods for obtaining stress-free reference values are discussed. The tensile behavior in the as-built condition is shown to be controlled by texture and cellular sub-grain structure, while in the heat-treated condition the precipitation of strengthening phases and grain morphology dictate the behavior. In fact, the results of this thesis show that the diffraction elastic constants depend on the underlying microstructure, including texture and grain morphology. For columnar microstructures in both as-built and heat-treated conditions, the diffraction elastic constants are best described by the Reuss iso-stress model. Furthermore, the low accumulation of intergranular strains during deformation demonstrates the robustness of using the 311 reflection for the diffraction-based residual stress analysis with columnar textured microstructures. The differences between texture-based and quasi-isotropic approaches for the residual stress analysis are shown to be insignificant in the observed case. However, the analysis of the sub-surface residual stress distributions show, that different scanning strategies result in a change in the orientation of the residual stress tensor. Furthermore, the location of the critical sub-surface tensile residual stress is related to the surface roughness and the microstructure. Finally, recommendations are given for the diffraction-based determination and evaluation of residual stress in textured additively manufactured alloys.}, language = {en} } @phdthesis{Federici2014, author = {Federici, Simone}, title = {Gamma-ray studies of the young shell-type SNR RX J1713.7-3946}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71734}, school = {Universit{\"a}t Potsdam}, year = {2014}, abstract = {One of the most significant current discussions in Astrophysics relates to the origin of high-energy cosmic rays. According to our current knowledge, the abundance distribution of the elements in cosmic rays at their point of origin indicates, within plausible error limits, that they were initially formed by nuclear processes in the interiors of stars. It is also believed that their energy distribution up to 1018 eV has Galactic origins. But even though the knowledge about potential sources of cosmic rays is quite poor above „ 1015 eV, that is the "knee" of the cosmic-ray spectrum, up to the knee there seems to be a wide consensus that supernova remnants are the most likely candidates. Evidence of this comes from observations of non-thermal X-ray radiation, requiring synchrotron electrons with energies up to 1014 eV, exactly in the remnant of supernovae. To date, however, there is not conclusive evidence that they produce nuclei, the dominant component of cosmic rays, in addition to electrons. In light of this dearth of evidence, γ-ray observations from supernova remnants can offer the most promising direct way to confirm whether or not these astrophysical objects are indeed the main source of cosmic-ray nuclei below the knee. Recent observations with space- and ground-based observatories have established shell-type supernova remnants as GeV-to- TeV γ-ray sources. The interpretation of these observations is however complicated by the different radiation processes, leptonic and hadronic, that can produce similar fluxes in this energy band rendering ambiguous the nature of the emission itself. The aim of this work is to develop a deeper understanding of these radiation processes from a particular shell-type supernova remnant, namely RX J1713.7-3946, using observations of the LAT instrument onboard the Fermi Gamma-Ray Space Telescope. Furthermore, to obtain accurate spectra and morphology maps of the emission associated with this supernova remnant, an improved model of the diffuse Galactic γ-ray emission background is developed. The analyses of RX J1713.7-3946 carried out with this improved background show that the hard Fermi-LAT spectrum cannot be ascribed to the hadronic emission, leading thus to the conclusion that the leptonic scenario is instead the most natural picture for the high-energy γ-ray emission of RX J1713.7-3946. The leptonic scenario however does not rule out the possibility that cosmic-ray nuclei are accelerated in this supernova remnant, but it suggests that the ambient density may not be high enough to produce a significant hadronic γ-ray emission. Further investigations involving other supernova remnants using the improved back- ground developed in this work could allow compelling population studies, and hence prove or disprove the origin of Galactic cosmic-ray nuclei in these astrophysical objects. A break- through regarding the identification of the radiation mechanisms could be lastly achieved with a new generation of instruments such as CTA.}, language = {en} } @phdthesis{Damle2023, author = {Damle, Mitali}, title = {Gas distribution around galaxies in cosmological simulations}, doi = {10.25932/publishup-59054}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-590543}, school = {Universit{\"a}t Potsdam}, pages = {ii, xii, 146}, year = {2023}, abstract = {The evolution of a galaxy is pivotally governed by its pattern of star formation over a given period of time. The star formation rate at any given time is strongly dependent on the amount of cold gas available in the galaxy. Accretion of pristine gas from the Intergalactic medium (IGM) is thought to be one of the primary sources for star-forming gas. This gas first passes through the virial regions of the galaxy before reaching the Interstellar medium (ISM), the hub of star formation. On the other hand, owing to the evolutionary course of young and massive stars, energetic winds are ejected from the ISM to the virial regions of the galaxy. A bunch of interlinked, complex astrophysical processes, arising from the concurrent presence of both infalling as well as outbound gas, play out over a range of timescales in the halo region or the Circumgalactic medium (CGM) of a galaxy. It would not be incorrect to say that the CGM has a stronghold over the gas reserves of a galaxy and thus, plays a backhand, yet, rather pivotal role in shaping many galactic properties, some of which are also readily observable. Observing the multi-phase CGM (via spectral-line ion measurements), however, remains a non-trivial effort even today. Low particle densities as well as the CGM's vast spatial extent, coupled with likely deviations from a spherical distribution, marr the possibility of obtaining complete, unbiased, high-quality spectral information tracing the full extent of the gaseous halo. This often incomplete information leads to multiple inferences about the CGM properties that give rise to multiple contradicting models. In this regard, computer simulations offer a neat solution towards testing and, subsequently, falsifying many of these existing CGM models. Thanks to their controlled environments, simulations are able to not only effortlessly transcend several orders of magnitude in time and space, but also get around many of the observational limitations and provide some unique views on many CGM properties. In this thesis, I focus on effectively using different computer simulations to understand the role of CGM in various astrophysical contexts, namely, the effect of Local Group (LG) environment, major merger events and satellite galaxies. In Chapter 2, I discuss the approach used for modeling various phases of the simulated z = 0 LG CGM in Hestia constrained simulations. Each of the three realizations contain a Milky Way (MW)-Andromeda (M31) galaxy pair, along with their corresponding sets of satellite galaxies, all embedded within the larger cosmological context. For characterizing the different temperature-density phases within the CGM, I model five tracer ions with cloudy ionization modeling. The cold and cool-ionized CGM (H i and Si iii respectively) in Hestia is very clumpy and distributed close to the galactic centers, while the warm-hot and hot CGM (O vi, O vii and O viii) is tenuous and volume-filling. On comparing the H i and Si iii column densities for the simulated M31 with observational measurements from Project AMIGA survey and other low-z galaxies, I found that Hestia galaxies produced less gas in the outer CGM, unlike observations. My carefully designed observational bias model subsequently revealed the possibility that some MW gas clouds might be incorrectly associated with the M31 CGM in observations, and hence, may be partly responsible for giving rise to the detected mismatch between simulated data and observations. In Chapter 3, I present results from four zoom-in, major merger, gas-rich simulations and the subsequent role of the gas, originally situated in the CGM, in influencing some of the galactic observables. The progenitor parameters are selected such that the post-merger remnants are MW-mass galaxies. We generally see a very clear gas bridge joining the merging galaxies in case of multiple passage mergers while such a bridge is mostly absent when a direct collision occurs. On the basis of particle-to-galaxy distance computations and tracer particle analysis, I found that about 33-48 percent of the cold gas contributing to the merger-induced star formation in the bridge originated from the CGM regions. In Chapter 4, I used a sample of 234 MW-mass, L* galaxies from the TNG50 cosmological simulations, with an aim of characterizing the impact of their global satellite populations on the extended cold CGM properties of their host L* halos. On the basis of halo mass and number of satellite galaxies (N_sats ), I categorized the sample into low and high mass bins, and subsequently into bottom, inter and top quartiles respectively. After confirming that satellites indeed influence the extended cold halo gas density profiles of the host galaxies, I investigated the effects of different satellite population parameters on the host halo cold CGMs. My analysis showed that there is hardly any cold gas associated with the satellite population of the lowest mass halos. The stellar mass of the most massive satellite (M_*mms ) impacted the cold gas in low mass bin halos the most, while N_sats (followed by M_*mms ) was the most influential factor for the high mass halos. In any case, how easily cold gas was stripped off the most massive satellite did not play much role. The number of massive (Stellar mass, M* > 10^8 M_solar) satellites as well as the M_*mms associated with a galaxy are two of the most crucial parameters determining how much cold gas ultimately finds its way from the satellites to the host halo. Low mass galaxies are found rather lacking on both these fronts unlike their high mass counterparts. This work highlights some aspects of the complex gas physics that constitute the basic essence of a low-z CGM. My analysis proved the importance of a cosmological environment, local surroundings and merger history in defining some key observable properties of a galactic CGM. Furthermore, I found that different satellite properties were responsible for affecting the cold-dense CGM of the low and high-mass parent galaxies. Finally, the LG emerged as an exciting prospect for testing and pinning down several intricate details about the CGM.}, language = {en} } @phdthesis{Dionysopoulou2016, author = {Dionysopoulou, Kyriaki}, title = {General-relativistic magnetohydrodynamics in compact objects}, school = {Universit{\"a}t Potsdam}, pages = {144}, year = {2016}, language = {en} } @phdthesis{Albrecht2014, author = {Albrecht, Steve}, title = {Generation, recombination and extraction of charges in polymer}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-72285}, school = {Universit{\"a}t Potsdam}, pages = {144}, year = {2014}, abstract = {A dramatic efficiency improvement of bulk heterojunction solar cells based on electron-donating conjugated polymers in combination with soluble fullerene derivatives has been achieved over the past years. Certified and reported power conversion efficiencies now reach over 9\% for single junctions and exceed the 10\% benchmark for tandem solar cells. This trend brightens the vision of organic photovoltaics becoming competitive with inorganic solar cells including the realization of low-cost and large-area organic photovoltaics. For the best performing organic materials systems, the yield of charge generation can be very efficient. However, a detailed understanding of the free charge carrier generation mechanisms at the donor acceptor interface and the energy loss associated with it needs to be established. Moreover, organic solar cells are limited by the competition between charge extraction and free charge recombination, accounting for further efficiency losses. A conclusive picture and the development of precise methodologies for investigating the fundamental processes in organic solar cells are crucial for future material design, efficiency optimization, and the implementation of organic solar cells into commercial products. In order to advance the development of organic photovoltaics, my thesis focuses on the comprehensive understanding of charge generation, recombination and extraction in organic bulk heterojunction solar cells summarized in 6 chapters on the cumulative basis of 7 individual publications. The general motivation guiding this work was the realization of an efficient hybrid inorganic/organic tandem solar cell with sub-cells made from amorphous hydrogenated silicon and organic bulk heterojunctions. To realize this project aim, the focus was directed to the low band-gap copolymer PCPDTBT and its derivatives, resulting in the examination of the charge carrier dynamics in PCPDTBT:PC70BM blends in relation to by the blend morphology. The phase separation in this blend can be controlled by the processing additive diiodooctane, enhancing domain purity and size. The quantitative investigation of the free charge formation was realized by utilizing and improving the time delayed collection field technique. Interestingly, a pronounced field dependence of the free carrier generation for all blends is found, with the field dependence being stronger without the additive. Also, the bimolecular recombination coefficient for both blends is rather high and increases with decreasing internal field which we suggest to be caused by a negative field dependence of mobility. The additive speeds up charge extraction which is rationalized by the threefold increase in mobility. By fluorine attachment within the electron deficient subunit of PCPDTBT, a new polymer F-PCPDTBT is designed. This new material is characterized by a stronger tendency to aggregate as compared to non-fluorinated PCPDTBT. Our measurements show that for F-PCPDTBT:PCBM blends the charge carrier generation becomes more efficient and the field-dependence of free charge carrier generation is weakened. The stronger tendency to aggregate induced by the fluorination also leads to increased polymer rich domains, accompanied in a threefold reduction in the non-geminate recombination coefficient at conditions of open circuit. The size of the polymer domains is nicely correlated to the field-dependence of charge generation and the Langevin reduction factor, which highlights the importance of the domain size and domain purity for efficient charge carrier generation. In total, fluorination of PCPDTBT causes the PCE to increase from 3.6 to 6.1\% due to enhanced fill factor, short circuit current and open circuit voltage. Further optimization of the blend ratio, active layer thickness, and polymer molecular weight resulted in 6.6\% efficiency for F-PCPDTBT:PC70BM solar cells. Interestingly, the double fluorinated version 2F-PCPDTBT exhibited poorer FF despite a further reduction of geminate and non-geminate recombination losses. To further analyze this finding, a new technique is developed that measures the effective extraction mobility under charge carrier densities and electrical fields comparable to solar cell operation conditions. This method involves the bias enhanced charge extraction technique. With the knowledge of the carrier density under different electrical field and illumination conditions, a conclusive picture of the changes in charge carrier dynamics leading to differences in the fill factor upon fluorination of PCPDTBT is attained. The more efficient charge generation and reduced recombination with fluorination is counterbalanced by a decreased extraction mobility. Thus, the highest fill factor of 60\% and efficiency of 6.6\% is reached for F-PCPDTBT blends, while 2F-PCPDTBT blends have only moderate fill factors of 54\% caused by the lower effective extraction mobility, limiting the efficiency to 6.5\%. To understand the details of the charge generation mechanism and the related losses, we evaluated the yield and field-dependence of free charge generation using time delayed collection field in combination with sensitive measurements of the external quantum efficiency and absorption coefficients for a variety of blends. Importantly, both the yield and field-dependence of free charge generation is found to be unaffected by excitation energy, including direct charge transfer excitation below the optical band gap. To access the non-detectable absorption at energies of the relaxed charge transfer emission, the absorption was reconstructed from the CT emission, induced via the recombination of thermalized charges in electroluminescence. For a variety of blends, the quantum yield at energies of charge transfer emission was identical to excitations with energies well above the optical band-gap. Thus, the generation proceeds via the split-up of the thermalized charge transfer states in working solar cells. Further measurements were conducted on blends with fine-tuned energy levels and similar blend morphologies by using different fullerene derivatives. A direct correlation between the efficiency of free carrier generation and the energy difference of the relaxed charge transfer state relative to the energy of the charge separated state is found. These findings open up new guidelines for future material design as new high efficiency materials require a minimum energetic offset between charge transfer and the charge separated state while keeping the HOMO level (and LUMO level) difference between donor and acceptor as small as possible.}, language = {en} } @phdthesis{Willner2018, author = {Willner, Sven N.}, title = {Global economic response to flood damages under climate change}, school = {Universit{\"a}t Potsdam}, pages = {v, 247}, year = {2018}, abstract = {Climate change affects societies across the globe in various ways. In addition to gradual changes in temperature and other climatic variables, global warming is likely to increase intensity and frequency of extreme weather events. Beyond biophysical impacts, these also directly affect societal and economic activity. Additionally, indirect effects can occur; spatially, economic losses can spread along global supply-chains; temporally, climate impacts can change the economic development trajectory of countries. This thesis first examines how climate change alters river flood risk and its local socio-economic implications. Then, it studies the global economic response to river floods in particular, and to climate change in general. Changes in high-end river flood risk are calculated for the next three decades on a global scale with high spatial resolution. In order to account for uncertainties, this assessment makes use of an ensemble of climate and hydrological models as well as a river routing model, that is found to perform well regarding peak river discharge. The results show an increase in high-end flood risk in many parts of the world, which require profound adaptation efforts. This pressure to adapt is measured as the enhancement in protection level necessary to stay at historical high-end risk. In developing countries as well as in industrialized regions, a high pressure to adapt is observed - the former to increase low protection levels, the latter to maintain the low risk levels perceived in the past. Further in this thesis, the global agent-based dynamic supply-chain model acclimate is developed. It models the cascading of indirect losses in the global supply network. As an anomaly model its agents - firms and consumers - maximize their profit locally to respond optimally to local perturbations. Incorporating quantities as well as prices on a daily basis, it is suitable to dynamically resolve the impacts of unanticipated climate extremes. The model is further complemented by a static measure, which captures the inter-dependencies between sectors across regions that are only connected indirectly. These higher-order dependencies are shown to be important for a comprehensive assessment of loss-propagation and overall costs of local disasters. In order to study the economic response to river floods, the acclimate model is driven by flood simulations. Within the next two decades, the increase in direct losses can only partially be compensated by market adjustments, and total losses are projected to increase by 17\% without further adaptation efforts. The US and the EU are both shown to receive indirect losses from China, which is strongly affected directly. However, recent trends in the trade relations leave the EU in a better position to compensate for these losses. Finally, this thesis takes a broader perspective when determining the investment response to the climate change damages employing the integrated assessment model DICE. On an optimal economic development path, the increase in damages is anticipated as emissions and consequently temperatures increase. This leads to a significant devaluation of investment returns and the income losses from climate damages almost double. Overall, the results highlight the need to adapt to extreme weather events - local physical adaptation measures have to be combined with regional and global policy measures to prepare the global supply-chain network to climate change.}, language = {en} } @phdthesis{Kondic2015, author = {Kondic, Todor}, title = {Hall-MHD Instabilities of Shear Flows in Neutron Stars}, school = {Universit{\"a}t Potsdam}, pages = {80}, year = {2015}, language = {en} } @phdthesis{Szklarski2007, author = {Szklarski, Jacek T.}, title = {Helical magnetorotational instability in MHD Taylor-Couette flow}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-16002}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {Magnetorotational instability (MRI) is one of the most important and most common instabilities in astrophysics. Today it is widely accepted that it serves as a major source of turbulent viscosity in accretion disks, the most energy efficient objects in the universe. The importance of the MRI for astrophysics has been realized only in recent fifteen years. However, originally it was discovered much earlier, in 1959, in a very different context. Theoretical flow of a conducting liquid confined between differentially rotating cylinders in the presence of an external magnetic field was analyzed. The central conclusion is that the additional magnetic field parallel to the axis of rotation can destabilize otherwise stable flow. Theory of non-magnetized fluid motion between rotating cylinders has much longer history, though. It has been studied already in 1888 and today such setup is usually referred as a Taylor-Couette flow. To prove experimentally the existence of MRI in a magnetized Taylor-Couette flow is a demanding task and different MHD groups around the world try to achieve it. The main problem lies in the fact that laboratory liquid metals which are used in such experiments are characterized by small magnetic Prandtl number. Consequently rotation rates of the cylinders must be extremely large and vast amount of technical problems emerge. One of the most important difficulties is an influence of plates enclosing the cylinders in any experiment. For fast rotation the plates tend to dominate the whole flow and the MRI can not be observed. In this thesis we discuss a special helical configuration of the applied magnetic field which allows the critical rotation rates to be much smaller. If only the axial magnetic field is present, the cylinders must rotate with angular velocities corresponding to Reynolds numbers of order Re ≈ 10^6. With the helical field this number is dramatically reduced to Re ≈ 10^3. The azimuthal component of the magnetic field can be easily generated by letting an electric current through the axis of rotation, In a Taylor-Couette flow the (primary) instability manifests itself as Taylor vortices. The specific geometry of the helical magnetic field leads to a traveling wave solution and the vortices are drifting in a direction determined by rotation and the magnetic field. In an idealized study for infinitely long cylinders this is not a problem. However, if the cylinders have finite length and are bounded vertically by the plates the situation is different. In this dissertation it is shown, with use of numerical methods, that the traveling wave solution also exists for MHD Taylor-Couette flow at finite aspect ratio H/D, H being height of the cylinders, D width of the gap between them. The nonlinear simulations provide amplitudes of fluid velocity which are helpful in designing an experiment. Although the plates disturb the flow, parameters like the drift velocity indicate that the helical MRI operates in this case. The idea of the helical MRI was implemented in a very recent experiment PROMISE. The results provided, for the first time, an evidence that the (helical) MRI indeed exists. Nevertheless, the influence of the vertical endplates was evident and the experiment can be, in principle, improved. Exemplary methods of reduction of the end-effect are here proposed. Near the vertical boundaries develops an Ekman-Hartmann layer. Study of this layer for the MHD Taylor-Couette system as well as its impact on the global flow properties is presented. It is shown that the plates, especially if they are conducting, can disturb the flow far more then previously thought also for relatively slow rotation rates.}, language = {en} } @phdthesis{Prokhorov2015, author = {Prokhorov, Boris E.}, title = {High-latitude coupling processes between thermospheric circulation and solar wind driven magnetospheric currents and plasma convection}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-92353}, school = {Universit{\"a}t Potsdam}, pages = {117}, year = {2015}, abstract = {The high-latitudinal thermospheric processes driven by the solar wind and Interplanetary Magnetic Field (IMF) interaction with the Earth magnetosphere are highly variable parts of the complex dynamic plasma environment, which represent the coupled Magnetosphere - Ionosphere - Thermosphere (MIT) system. The solar wind and IMF interactions transfer energy to the MIT system via reconnection processes at the magnetopause. The Field Aligned Currents (FACs) constitute the energetic links between the magnetosphere and the Earth ionosphere. The MIT system depends on the highly variable solar wind conditions, in particular on changes of the strength and orientation of the IMF. In my thesis, I perform an investigation on the physical background of the complex MIT system using the global physical - numerical, three-dimensional, time-dependent and self-consistent Upper Atmosphere Model (UAM). This model describes the thermosphere, ionosphere, plasmasphere and inner magnetosphere as well as the electrodynamics of the coupled MIT system for the altitudinal range from 80 (60) km up to the 15 Earth radii. In the present study, I developed and investigated several variants of the high-latitudinal electrodynamic coupling by including the IMF dependence of FACs into the UAM model. For testing, the various variants were applied to simulations of the coupled MIT system for different seasons, geomagnetic activities, various solar wind and IMF conditions. Additionally, these variants of the theoretical model with the IMF dependence were compared with global empirical models. The modelling results for the most important thermospheric parameters like neutral wind and mass density were compared with satellite measurements. The variants of the UAM model with IMF dependence show a good agreement with the satellite observations. In comparison with the empirical models, the improved variants of the UAM model reproduce a more realistic meso-scale structures and dynamics of the coupled MIT system than the empirical models, in particular at high latitudes. The new configurations of the UAM model with IMF dependence contribute to the improvement of space weather prediction.}, language = {en} } @phdthesis{FernandesGuimaraes2012, author = {Fernandes Guimar{\~a}es, Ana Helena}, title = {How does adhesion influence the small aggregates in Saturn's rings}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-61846}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {Particles in Saturn's main rings range in size from dust to even kilometer-sized objects. Their size distribution is thought to be a result of competing accretion and fragmentation processes. While growth is naturally limited in tidal environments, frequent collisions among these objects may contribute to both accretion and fragmentation. As ring particles are primarily made of water ice attractive surface forces like adhesion could significantly influence these processes, finally determining the resulting size distribution. Here, we derive analytic expressions for the specific self-energy Q and related specific break-up energy Q⋆ of aggregates. These expressions can be used for any aggregate type composed of monomeric constituents. We compare these expressions to numerical experiments where we create aggregates of various types including: regular packings like the face-centered cubic (fcc), Ballistic Particle Cluster Aggregates (BPCA), and modified BPCAs including e.g. different constituent size distributions. We show that accounting for attractive surface forces such as adhesion a simple approach is able to: a) generally account for the size dependence of the specific break-up energy for fragmentation to occur reported in the literature, namely the division into "strength" and "gravity" regimes, and b) estimate the maximum aggregate size in a collisional ensemble to be on the order of a few meters, consistent with the maximum aggregate size observed in Saturn's rings of about 10m.}, language = {en} } @phdthesis{Stechemesser2023, author = {Stechemesser, Annika}, title = {Human behaviour in a warming world}, school = {Universit{\"a}t Potsdam}, pages = {339}, year = {2023}, language = {en} } @phdthesis{Pavlenko2016, author = {Pavlenko, Elena}, title = {Hybrid nanolayer architectures for ultrafast acousto-plasmonics in soft matter}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-99544}, school = {Universit{\"a}t Potsdam}, pages = {85}, year = {2016}, abstract = {The goal of the presented work is to explore the interaction between gold nanorods (GNRs) and hyper-sound waves. For the generation of the hyper-sound I have used Azobenzene-containing polymer transducers. Multilayer polymer structures with well-defined thicknesses and smooth interfaces were built via layer-by-layer deposition. Anionic polyelectrolytes with Azobenzene side groups (PAzo) were alternated with cationic polymer PAH, for the creation of transducer films. PSS/PAH multilayer were built for spacer layers, which do not absorb in the visible light range. The properties of the PAzo/PAH film as a transducer are carefully characterized by static and transient optical spectroscopy. The optical and mechanical properties of the transducer are studied on the picosecond time scale. In particular the relative change of the refractive index of the photo-excited and expanded PAH/PAzo is Δn/n = - 2.6*10-4. Calibration of the generated strain is performed by ultrafast X-ray diffraction calibrated the strain in a Mica substrate, into which the hyper-sound is transduced. By simulating the X-ray data with a linear-chain-model the strain in the transducer under the excitation is derived to be Δd/d ~ 5*10-4. Additional to the investigation of the properties of the transducer itself, I have performed a series of experiments to study the penetration of the generated strain into various adjacent materials. By depositing the PAzo/PAH film onto a PAH/PSS structure with gold nanorods incorporated in it, I have shown that nanoscale impurities can be detected via the scattering of hyper-sound. Prior to the investigation of complex structures containing GNRs and the transducer, I have performed several sets of experiments on GNRs deposited on a small buffer of PSS/PAH. The static and transient response of GNRs is investigated for different fluence of the pump beam and for different dielectric environments (GNRs covered by PSS/PAH). A systematic analysis of sample architectures is performed in order to construct a sample with the desired effect of GNRs responding to the hyper-sound strain wave. The observed shift of a feature related to the longitudinal plasmon resonance in the transient reflection spectra is interpreted as the event of GNRs sensing the strain wave. We argue that the shift of the longitudinal plasmon resonance is caused by the viscoelastic deformation of the polymer around the nanoparticle. The deformation is induced by the out of plane difference in strain in the area directly under a particle and next to it. Simulations based on the linear chain model support this assumption. Experimentally this assumption is proven by investigating the same structure, with GNRs embedded in a PSS/PAH polymer layer. The response of GNRs to the hyper-sound wave is also observed for the sample structure with GNRs embedded in PAzo/PAH films. The response of GNRs in this case is explained to be driven by the change of the refractive index of PAzo during the strain propagation.}, language = {en} } @phdthesis{Bojahr2016, author = {Bojahr, Andre}, title = {Hypersound interaction studied by time-resolved inelastic light and x-ray scattering}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-93860}, school = {Universit{\"a}t Potsdam}, pages = {xxiii, 201}, year = {2016}, abstract = {This publications-based thesis summarizes my contribution to the scientific field of ultrafast structural dynamics. It consists of 16 publications, about the generation, detection and coupling of coherent gigahertz longitudinal acoustic phonons, also called hypersonic waves. To generate such high frequency phonons, femtosecond near infrared laser pulses were used to heat nanostructures composed of perovskite oxides on an ultrashort timescale. As a consequence the heated regions of such a nanostructure expand and a high frequency acoustic phonon pulse is generated. To detect such coherent acoustic sound pulses I use ultrafast variants of optical Brillouin and x-ray scattering. Here an incident optical or x-ray photon is scattered by the excited sound wave in the sample. The scattered light intensity measures the occupation of the phonon modes. The central part of this work is the investigation of coherent high amplitude phonon wave packets which can behave nonlinearly, quite similar to shallow water waves which show a steepening of wave fronts or solitons well known as tsunamis. Due to the high amplitude of the acoustic wave packets in the solid, the acoustic properties can change significantly in the vicinity of the sound pulse. This may lead to a shape change of the pulse. I have observed by time-resolved Brillouin scattering, that a single cycle hypersound pulse shows a wavefront steepening. I excited hypersound pulses with strain amplitudes until 1\% which I have calibrated by ultrafast x-ray diffraction (UXRD). On the basis of this first experiment we developed the idea of the nonlinear mixing of narrowband phonon wave packets which we call "nonlinear phononics" in analogy with the nonlinear optics, which summarizes a kaleidoscope of surprising optical phenomena showing up at very high electric fields. Such phenomena are for instance Second Harmonic Generation, four-wave-mixing or solitons. But in case of excited coherent phonons the wave packets have usually very broad spectra which make it nearly impossible to look at elementary scattering processes between phonons with certain momentum and energy. For that purpose I tested different techniques to excite narrowband phonon wave packets which mainly consist of phonons with a certain momentum and frequency. To this end epitaxially grown metal films on a dielectric substrate were excited with a train of laser pulses. These excitation pulses drive the metal film to oscillate with the frequency given by their inverse temporal displacement and send a hypersonic wave of this frequency into the substrate. The monochromaticity of these wave packets was proven by ultrafast optical Brillouin and x-ray scattering. Using the excitation of such narrowband phonon wave packets I was able to observe the Second Harmonic Generation (SHG) of coherent phonons as a first example of nonlinear wave mixing of nanometric phonon wave packets.}, language = {en} } @phdthesis{Wolff2020, author = {Wolff, Christian Michael}, title = {Identification and reduction of losses in perovskite solar cells}, doi = {10.25932/publishup-47930}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-479301}, school = {Universit{\"a}t Potsdam}, pages = {x, 158}, year = {2020}, abstract = {Perovskite solar cells have become one of the most studied systems in the quest for new, cheap and efficient solar cell materials. Within a decade device efficiencies have risen to >25\% in single-junction and >29\% in tandem devices on top of silicon. This rapid improvement was in many ways fortunate, as e. g. the energy levels of commonly used halide perovskites are compatible with already existing materials from other photovoltaic technologies such as dye-sensitized or organic solar cells. Despite this rapid success, fundamental working principles must be understood to allow concerted further improvements. This thesis focuses on a comprehensive understanding of recombination processes in functioning devices. First the impact the energy level alignment between the perovskite and the electron transport layer based on fullerenes is investigated. This controversial topic is comprehensively addressed and recombination is mitigated through reducing the energy difference between the perovskite conduction band minimum and the LUMO of the fullerene. Additionally, an insulating blocking layer is introduced, which is even more effective in reducing this recombination, without compromising carrier collection and thus efficiency. With the rapid efficiency development (certified efficiencies have broken through the 20\% ceiling) and thousands of researchers working on perovskite-based optoelectronic devices, reliable protocols on how to reach these efficiencies are lacking. Having established robust methods for >20\% devices, while keeping track of possible pitfalls, a detailed description of the fabrication of perovskite solar cells at the highest efficiency level (>20\%) is provided. The fabrication of low-temperature p-i-n structured devices is described, commenting on important factors such as practical experience, processing atmosphere \& temperature, material purity and solution age. Analogous to reliable fabrication methods, a method to identify recombination losses is needed to further improve efficiencies. Thus, absolute photoluminescence is identified as a direct way to quantify the Quasi-Fermi level splitting of the perovskite absorber (1.21eV) and interfacial recombination losses the transport layers impose, reducing the latter to ~1.1eV. Implementing very thin interlayers at both the p- and n-interface (PFN-P2 and LiF, respectively), these losses are suppressed, enabling a VOC of up to 1.17eV. Optimizing the device dimensions and the bandgap, 20\% devices with 1cm2 active area are demonstrated. Another important consideration is the solar cells' stability if subjected to field-relevant stressors during operation. In particular these are heat, light, bias or a combination thereof. Perovskite layers - especially those incorporating organic cations - have been shown to degrade if subjected to these stressors. Keeping in mind that several interlayers have been successfully used to mitigate recombination losses, a family of perfluorinated self-assembled monolayers (X-PFCn, where X denotes I/Br and n = 7-12) are introduced as interlayers at the n-interface. Indeed, they reduce interfacial recombination losses enabling device efficiencies up to 21.3\%. Even more importantly they improve the stability of the devices. The solar cells with IPFC10 are stable over 3000h stored in the ambient and withstand a harsh 250h of MPP at 85◦C without appreciable efficiency losses. To advance further and improve device efficiencies, a sound understanding of the photophysics of a device is imperative. Many experimental observations in recent years have however drawn an inconclusive picture, often suffering from technical of physical impediments, disguising e. g. capacitive discharge as recombination dynamics. To circumvent these obstacles, fully operational, highly efficient perovskites solar cells are investigated by a combination of multiple optical and optoelectronic probes, allowing to draw a conclusive picture of the recombination dynamics in operation. Supported by drift-diffusion simulations, the device recombination dynamics can be fully described by a combination of first-, second- and third-order recombination and JV curves as well as luminescence efficiencies over multiple illumination intensities are well described within the model. On this basis steady state carrier densities, effective recombination constants, densities-of-states and effective masses are calculated, putting the devices at the brink of the radiative regime. Moreover, a comprehensive review of recombination in state-of-the-art devices is given, highlighting the importance of interfaces in nonradiative recombination. Different strategies to assess these are discussed, before emphasizing successful strategies to reduce interfacial recombination and pointing towards the necessary steps to further improve device efficiency and stability. Overall, the main findings represent an advancement in understanding loss mechanisms in highly efficient solar cells. Different reliable optoelectronic techniques are used and interfacial losses are found to be of grave importance for both efficiency and stability. Addressing the interfaces, several interlayers are introduced, which mitigate recombination losses and degradation.}, language = {en} } @phdthesis{Kuhla2022, author = {Kuhla, Kilian}, title = {Impact, distribution, and adaptation}, doi = {10.25932/publishup-55266}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-552668}, school = {Universit{\"a}t Potsdam}, pages = {vii, 309}, year = {2022}, abstract = {Weather extremes pose a persistent threat to society on multiple layers. Besides an average of ~37,000 deaths per year, climate-related disasters cause destroyed properties and impaired economic activities, eroding people's livelihoods and prosperity. While global temperature rises - caused by anthropogenic greenhouse gas emissions - the direct impacts of climatic extreme events increase and will further intensify without proper adaptation measures. Additionally, weather extremes do not only have local direct effects. Resulting economic repercussions can propagate either upstream or downstream along trade chains causing indirect effects. One approach to analyze these indirect effects within the complex global supply network is the agent-based model Acclimate. Using and extending this loss-propagation model, I focus in this thesis on three aspects of the relation between weather extremes and economic repercussions. First, extreme weather events cause direct impacts on local economic performance. I compute daily local direct output loss time series of heat stress, river floods, tropical cyclones, and their consecutive occurrence using (near-future) climate projection ensembles. These regional impacts are estimated based on physical drivers and local productivity distribution. Direct effects of the aforementioned disaster categories are widely heterogeneous concerning regional and temporal distribution. As well, their intensity changes differently under future warming. Focusing on the hurricane-impacted capital, I find that long-term growth losses increase with higher heterogeneity of a shock ensemble. Second, repercussions are sectorally and regionally distributed via economic ripples within the trading network, causing higher-order effects. I use Acclimate to identify three phases of those economic ripples. Furthermore, I compute indirect impacts and analyze overall regional and global production and consumption changes. Regarding heat stress, global consumer losses double while direct output losses increase by a factor 1.5 between 2000 - 2039. In my research I identify the effect of economic ripple resonance and introduce it to climate impact research. This effect occurs if economic ripples of consecutive disasters overlap, which increases economic responses such as an enhancement of consumption losses. These loss enhancements can even be more amplified with increasing direct output losses, e.g. caused by climate crises. Transport disruptions can cause economic repercussions as well. For this, I extend the model Acclimate with a geographical transportation route and expand the decision horizon of economic agents. Using this, I show that policy-induced sudden trade restrictions (e.g. a no-deal Brexit) can significantly reduce the longer-term economic prosperity of affected regions. Analyses of transportation disruptions in typhoon seasons indicate that severely affected regions must reduce production as demand falls during a storm. Substituting suppliers may compensate for fluctuations at the beginning of the storm, which fails for prolonged disruptions. Third, possible coping mechanisms and adaptation strategies arise from direct and indirect economic responses to weather extremes. Analyzing annual trade changes due to typhoon-induced transport disruptions depict that overall exports rise. This trade resilience increases with higher network node diversification. Further, my research shows that a basic insurance scheme may diminish hurricane-induced long-term growth losses due to faster reconstruction in disasters aftermaths. I find that insurance coverage could be an economically reasonable coping scheme towards higher losses caused by the climate crisis. Indirect effects within the global economic network from weather extremes indicate further adaptation possibilities. For one, diversifying linkages reduce the hazard of sharp price increases. Next to this, close economic interconnections with regions that do not share the same extreme weather season can be economically beneficial in the medium run. Furthermore, economic ripple resonance effects should be considered while computing costs. Overall, an increase in local adaptation measures reduces economic ripples within the trade network and possible losses elsewhere. In conclusion, adaptation measures are necessary and potential present, but it seems rather not possible to avoid all direct or indirect losses. As I show in this thesis, dynamical modeling gives valuable insights into how direct and indirect economic impacts arise from different categories of weather extremes. Further, it highlights the importance of resolving individual extremes and reflecting amplifying effects caused by incomplete recovery or consecutive disasters.}, language = {en} } @phdthesis{Fuessel2003, author = {F{\"u}ssel, Hans-Martin}, title = {Impacts analysis for inverse integrated assessments of climate change}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001089}, school = {Universit{\"a}t Potsdam}, year = {2003}, abstract = {Diese Dissertation beschreibt die Entwicklung und Anwendung des Klimawirkungsmoduls des ICLIPS-Modells, eines integrierten Modells des Klimawandels ('Integrated Assessment'-Modell). Vorangestellt ist eine Diskussion des gesellschaftspolitischen Kontexts, in dem modellbasiertes 'Integrated Assessment' stattfindet, aus der wichtige Anforderungen an die Spezifikation des Klimawirkungsmoduls abgeleitet werden. Das 'Integrated Assessment' des Klimawandels umfasst eine weiten Bereich von Aktivit{\"a}ten zur wissenschaftsbasierten Unterst{\"u}tzung klimapolitischer Entscheidungen. Hierbei wird eine Vielzahl von Ans{\"a}tzen verfolgt, um politikrelevante Informationen {\"u}ber die erwarteten Auswirkungen des Klimawandels zu ber{\"u}cksichtigen. Wichtige Herausforderungen in diesem Bereich sind die große Bandbreite der relevanten r{\"a}umlichen und zeitlichen Skalen, die multifaktorielle Verursachung vieler 'Klimafolgen', erhebliche wissenschaftliche Unsicherheiten sowie die Mehrdeutigkeit unvermeidlicher Werturteile. Die Entwicklung eines hierarchischen Konzeptmodells erlaubt die Strukturierung der verschiedenen Ans{\"a}tze sowie die Darstellung eines mehrstufigen Entwicklungsprozesses, der sich in der Praxis und der zu Grunde liegenden Theorie von Studien zur Vulnerabilit{\"a}t hinsichtlich des Klimawandels wiederspiegelt. 'Integrated Assessment'-Modelle des Klimawandels sind wissenschaftliche Werkzeuge, welche eine vereinfachte Beschreibung des gekoppelten Mensch-Klima-Systems enthalten. Die wichtigsten entscheidungstheoretischen Ans{\"a}tze im Bereich des modellbasierten 'Integrated Assessment' werden im Hinblick auf ihre F{\"a}higkeit zur ad{\"a}quaten Darstellung klimapolitischer Entscheidungsprobleme bewertet. Dabei stellt der 'Leitplankenansatz' eine 'inverse' Herangehensweise zur Unterst{\"u}tzung klimapolitischer Entscheidungen dar, bei der versucht wird, die Gesamtheit der klimapolitischen Strategien zu bestimmen, die mit einer Reihe von zuvor normativ bestimmten Mindestkriterien (den sogenannten 'Leitplanken') vertr{\"a}glich sind. Dieser Ansatz verbindet bis zu einem gewissen Grad die wissenschaftliche Strenge und Objektivit{\"a}t simulationsbasierter Ans{\"a}tze mit der F{\"a}higkeit von Optimierungsans{\"a}tzen, die Gesamtheit aller Entscheidungsoptionen zu ber{\"u}cksichtigen. Das ICLIPS-Modell ist das erste 'Integrated Assessment'-Modell des Klimawandels, welches den Leitplankenansatz implementiert. Die Darstellung von Klimafolgen ist eine wichtige Herausforderung f{\"u}r 'Integrated Assessment'-Modelle des Klimawandels. Eine Betrachtung bestehender 'Integrated Assessment'-Modelle offenbart große Unterschiede in der Ber{\"u}cksichtigung verschiedener vom Klimawandel betroffenen Sektoren, in der Wahl des bzw. der Indikatoren zur Darstellung von Klimafolgen, in der Ber{\"u}cksichtigung nicht-klimatischer Entwicklungen einschließlich gezielter Anpassungsmaßnahmen an den Klimawandel, in der Behandlung von Unsicherheiten und in der Ber{\"u}cksichtigung von 'singul{\"a}ren' Ereignissen. 'Integrated Assessment'-Modelle, die auf einem Inversansatz beruhen, stellen besondere Anforderungen an die Darstellung von Klimafolgen. Einerseits muss der Detaillierungsgrad hinreichend sein, um Leitplanken f{\"u}r Klimafolgen sinnvoll definieren zu k{\"o}nnen; andererseits muss die Darstellung effizient genug sein, um die Gesamtheit der m{\"o}glichen klimapolitischen Strategien erkunden zu k{\"o}nnen. Großr{\"a}umige Singularit{\"a}ten k{\"o}nnen h{\"a}ufig durch vereinfachte dynamische Modelle abgebildet werden. Diese Methode ist jedoch weniger geeignet f{\"u}r regul{\"a}re Klimafolgen, bei denen die Bestimmung relevanter Ergebnisse in der Regel die Ber{\"u}cksichtigung der Heterogenit{\"a}t von klimatischen, naturr{\"a}umlichen und sozialen Faktoren auf der lokalen oder regionalen Ebene erfordert. Klimawirkungsfunktionen stellen sich als die geeignetste Darstellung regul{\"a}rer Klimafolgen im ICLIPS-Modell heraus. Eine Klimawirkungsfunktion beschreibt in aggregierter Form die Reaktion eines klimasensitiven Systems, wie sie von einem geographisch expliziten Klimawirkungsmodell f{\"u}r eine repr{\"a}sentative Teilmenge m{\"o}glicher zuk{\"u}nftiger Entwicklungen simuliert wurde. Die in dieser Arbeit vorgestellten Klimawirkungsfunktionen nutzen die globale Mitteltemperatur sowie die atmosph{\"a}rische CO2-Konzentration als Pr{\"a}diktoren f{\"u}r global und regional aggregierte Auswirkungen des Klimawandels auf nat{\"u}rliche {\"O}kosysteme, die landwirtschaftliche Produktion und die Wasserverf{\"u}gbarkeit. Die Anwendung einer 'Musterskalierungstechnik' erm{\"o}glicht hierbei die Ber{\"u}cksichtigung der regionalen und saisonalen Muster des Klima{\"a}nderungssignals aus allgemeinen Zirkulationsmodellen, ohne die Effizienz der dynamischen Modellkomponenten zu beeintr{\"a}chtigen. Bem{\"u}hungen zur quantitativen Absch{\"a}tzung zuk{\"u}nftiger Klimafolgen sehen sich bei der Wahl geeigneter Indikatoren in der Regel einem Zielkonflikt zwischen der Relevanz eines Indikators f{\"u}r Entscheidungstr{\"a}ger und der Zuverl{\"a}ssigkeit, mit der dieser bestimmt werden kann, gegen{\"u}ber. Eine Reihe von nichtmonet{\"a}ren Indikatoren zur aggregierten Darstellung von Klimafolgen in Klimawirkungsfunktionen wird pr{\"a}sentiert, welche eine Balance zwischen diesen beiden Zielen anstreben und gleichzeitig die Beschr{\"a}nkungen ber{\"u}cksichtigen, die sich aus anderen Komponenten des ICLIPS-Modells ergeben. Klimawirkungsfunktionen werden durch verschiedene Typen von Diagrammen visualisiert, welche jeweils unterschiedliche Perspektiven auf die Ergebnismenge der Klimawirkungssimulationen erlauben. Die schiere Anzahl von Klimawirkungsfunktionen verhindert ihre umfassende Darstellung in dieser Arbeit. Ausgew{\"a}hlte Ergebnisse zu Ver{\"a}nderungen in der r{\"a}umlichen Ausdehnung von Biomen, im landwirtschaftlichen Potential verschiedener L{\"a}nder und in der Wasserverf{\"u}gbarkeit in mehreren großen Einzugsgebieten werden diskutiert. Die Gesamtheit der Klimawirkungsfunktionen wird zug{\"a}nglich gemacht durch das 'ICLIPS Impacts Tool', eine graphische Benutzeroberfl{\"a}che, die einen bequemen Zugriff auf {\"u}ber 100.000 Klimawirkungsdiagramme erm{\"o}glicht. Die technischen Aspekte der Software sowie die zugeh{\"o}rige Datenbasis wird beschrieben. Die wichtigste Anwendung von Klimawirkungsfunktionen ist im 'Inversmodus', wo sie genutzt werden, um Leitplanken zur Begrenzung von Klimafolgen in gleichzeitige Randbedingungen f{\"u}r Variablen aus dem optimierenden ICLIPS-Klima-Weltwirtschafts-Modell zu {\"u}bersetzen. Diese {\"U}bersetzung wird erm{\"o}glicht durch Algorithmen zur Bestimmung von Mengen erreichbarer Klimazust{\"a}nde ('reachable climate domains') sowie zur parametrisierten Approximation zul{\"a}ssiger Klimafenster ('admissible climate windows'), die aus Klimawirkungsfunktionen abgeleitet werden. Der umfassende Bestand an Klimawirkungsfunktionen zusammen mit diesen Algorithmen erm{\"o}glicht es dem integrierten ICLIPS-Modell, in flexibler Weise diejenigen klimapolitischen Strategien zu bestimmen, welche bestimmte in biophysikalischen Einheiten ausgedr{\"u}ckte Begrenzungen von Klimafolgen explizit ber{\"u}cksichtigen. Diese M{\"o}glichkeit bietet kein anderes intertemporal optimierendes 'Integrated Assessment'-Modell. Eine Leitplankenanalyse mit dem integrierten ICLIPS-Modell unter Anwendung ausgew{\"a}hlter Klimawirkungsfunktionen f{\"u}r Ver{\"a}nderungen nat{\"u}rlicher {\"O}kosysteme wird beschrieben. In dieser Analyse werden so genannte 'notwendige Emissionskorridore' berechnet, die vorgegebene Beschr{\"a}nkungen hinsichtlich der maximal zul{\"a}ssigen globalen Vegetationsver{\"a}nderungen und der regionalen Klimaschutzkosten ber{\"u}cksichtigen. Dies geschieht sowohl f{\"u}r eine 'Standardkombination' der drei gew{\"a}hlten Kriterien als auch f{\"u}r deren systematische Variation. Eine abschließende Diskussion aktueller Entwicklungen in der 'Integrated Assessment'-Modellierung stellt diese Arbeit mit anderen einschl{\"a}gigen Bem{\"u}hungen in Beziehung.}, language = {en} } @phdthesis{Kriegler2005, author = {Kriegler, Elmar}, title = {Imprecise probability analysis for integrated assessment of climate change}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5611}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {We present an application of imprecise probability theory to the quantification of uncertainty in the integrated assessment of climate change. Our work is motivated by the fact that uncertainty about climate change is pervasive, and therefore requires a thorough treatment in the integrated assessment process. Classical probability theory faces some severe difficulties in this respect, since it cannot capture very poor states of information in a satisfactory manner. A more general framework is provided by imprecise probability theory, which offers a similarly firm evidential and behavioural foundation, while at the same time allowing to capture more diverse states of information. An imprecise probability describes the information in terms of lower and upper bounds on probability. For the purpose of our imprecise probability analysis, we construct a diffusion ocean energy balance climate model that parameterises the global mean temperature response to secular trends in the radiative forcing in terms of climate sensitivity and effective vertical ocean heat diffusivity. We compare the model behaviour to the 20th century temperature record in order to derive a likelihood function for these two parameters and the forcing strength of anthropogenic sulphate aerosols. Results show a strong positive correlation between climate sensitivity and ocean heat diffusivity, and between climate sensitivity and absolute strength of the sulphate forcing. We identify two suitable imprecise probability classes for an efficient representation of the uncertainty about the climate model parameters and provide an algorithm to construct a belief function for the prior parameter uncertainty from a set of probability constraints that can be deduced from the literature or observational data. For the purpose of updating the prior with the likelihood function, we establish a methodological framework that allows us to perform the updating procedure efficiently for two different updating rules: Dempster's rule of conditioning and the Generalised Bayes' rule. Dempster's rule yields a posterior belief function in good qualitative agreement with previous studies that tried to constrain climate sensitivity and sulphate aerosol cooling. In contrast, we are not able to produce meaningful imprecise posterior probability bounds from the application of the Generalised Bayes' Rule. We can attribute this result mainly to our choice of representing the prior uncertainty by a belief function. We project the Dempster-updated belief function for the climate model parameters onto estimates of future global mean temperature change under several emissions scenarios for the 21st century, and several long-term stabilisation policies. Within the limitations of our analysis we find that it requires a stringent stabilisation level of around 450 ppm carbon dioxide equivalent concentration to obtain a non-negligible lower probability of limiting the warming to 2 degrees Celsius. We discuss several frameworks of decision-making under ambiguity and show that they can lead to a variety of, possibly imprecise, climate policy recommendations. We find, however, that poor states of information do not necessarily impede a useful policy advice. We conclude that imprecise probabilities constitute indeed a promising candidate for the adequate treatment of uncertainty in the integrated assessment of climate change. We have constructed prior belief functions that allow much weaker assumptions on the prior state of information than a prior probability would require and, nevertheless, can be propagated through the entire assessment process. As a caveat, the updating issue needs further investigation. Belief functions constitute only a sensible choice for the prior uncertainty representation if more restrictive updating rules than the Generalised Bayes'Rule are available.}, subject = {Anthropogene Klima{\"a}nderung}, language = {en} } @phdthesis{Cecchini2019, author = {Cecchini, Gloria}, title = {Improving network inference by overcoming statistical limitations}, doi = {10.25932/publishup-42670}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426705}, school = {Universit{\"a}t Potsdam}, pages = {124}, year = {2019}, abstract = {A reliable inference of networks from data is of key interest in many scientific fields. Several methods have been suggested in the literature to reliably determine links in a network. These techniques rely on statistical methods, typically controlling the number of false positive links, but not considering false negative links. In this thesis new methodologies to improve network inference are suggested. Initial analyses demonstrate the impact of falsepositive and false negative conclusions about the presence or absence of links on the resulting inferred network. Consequently, revealing the importance of making well-considered choices leads to suggest new approaches to enhance existing network reconstruction methods. A simulation study, presented in Chapter 3, shows that different values to balance false positive and false negative conclusions about links should be used in order to reliably estimate network characteristics. The existence of type I and type II errors in the reconstructed network, also called biased network, is accepted. Consequently, an analytic method that describes the influence of these two errors on the network structure is explored. As a result of this analysis, an analytic formula of the density of the biased vertex degree distribution is found (Chapter 4). In the inverse problem, the vertex degree distribution of the true underlying network is analytically reconstructed, assuming the probabilities of type I and type II errors. Chapters 4-5 show that the method is robust to incorrect estimates of α and β within reasonable limits. In Chapter 6, an iterative procedure to enhance this method is presented in the case of large errors on the estimates of α and β. The investigations presented so far focus on the influence of false positive and false negative links on the network characteristics. In Chapter 7, the analysis is reversed - the study focuses on the influence of network characteristics on the probability of type I and type II errors, in the case of networks of coupled oscillators. The probabilities of α and β are influenced by the shortest path length and the detour degree, respectively. These results have been used to improve the network reconstruction, when the true underlying network is not known a priori, introducing a novel and advanced concept of threshold.}, language = {en} } @phdthesis{Damseaux2024, author = {Damseaux, Adrien}, title = {Improving permafrost dynamics in land surface models: insights from dual sensitivity experiments}, doi = {10.25932/publishup-63945}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-639450}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 143}, year = {2024}, abstract = {The thawing of permafrost and the subsequent release of greenhouse gases constitute one of the most significant and uncertain positive feedback loops in the context of climate change, making predictions regarding changes in permafrost coverage of paramount importance. To address these critical questions, climate scientists have developed Land Surface Models (LSMs) that encompass a multitude of physical soil processes. This thesis is committed to advancing our understanding and refining precise representations of permafrost dynamics within LSMs, with a specific focus on the accurate modeling of heat fluxes, an essential component for simulating permafrost physics. The first research question overviews fundamental model prerequisites for the representation of permafrost soils within land surface modeling. It includes a first-of-its-kind comparison between LSMs in CMIP6 to reveal their differences and shortcomings in key permafrost physics parameters. Overall, each of these LSMs represents a unique approach to simulating soil processes and their interactions with the climate system. Choosing the most appropriate model for a particular application depends on factors such as the spatial and temporal scale of the simulation, the specific research question, and available computational resources. The second research question evaluates the performance of the state-of-the-art Community Land Model (CLM5) in simulating Arctic permafrost regions. Our approach overcomes traditional evaluation limitations by individually addressing depth, seasonality, and regional variations, providing a comprehensive assessment of permafrost and soil temperature dynamics. I compare CLM5's results with three extensive datasets: (1) soil temperatures from 295 borehole stations, (2) active layer thickness (ALT) data from the Circumpolar Active Layer Monitoring Network (CALM), and (3) soil temperatures, ALT, and permafrost extent from the ESA Climate Change Initiative (ESA-CCI). The results show that CLM5 aligns well with ESA-CCI and CALM for permafrost extent and ALT but reveals a significant global cold temperature bias, notably over Siberia. These results echo a persistent challenge identified in numerous studies: the existence of a systematic 'cold bias' in soil temperature over permafrost regions. To address this challenge, the following research questions propose dual sensitivity experiments. The third research question represents the first study to apply a Plant Functional Type (PFT)-based approach to derive soil texture and soil organic matter (SOM), departing from the conventional use of coarse-resolution global data in LSMs. This novel method results in a more uniform distribution of soil organic matter density (OMD) across the domain, characterized by reduced OMD values in most regions. However, changes in soil texture exhibit a more intricate spatial pattern. Comparing the results to observations reveals a significant reduction in the cold bias observed in the control run. This method shows noticeable improvements in permafrost extent, but at the cost of an overestimation in ALT. These findings emphasize the model's high sensitivity to variations in soil texture and SOM content, highlighting the crucial role of soil composition in governing heat transfer processes and shaping the seasonal variation of soil temperatures in permafrost regions. Expanding upon a site experiment conducted in Trail Valley Creek by \citet{dutch_impact_2022}, the fourth research question extends the application of the snow scheme proposed by \citet{sturm_thermal_1997} to cover the entire Arctic domain. By employing a snow scheme better suited to the snow density profile observed over permafrost regions, this thesis seeks to assess its influence on simulated soil temperatures. Comparing this method to observational datasets reveals a significant reduction in the cold bias that was present in the control run. In most regions, the Sturm run exhibits a substantial decrease in the cold bias. However, there is a distinctive overshoot with a warm bias observed in mountainous areas. The Sturm experiment effectively addressed the overestimation of permafrost extent in the control run, albeit resulting in a substantial reduction in permafrost extent over mountainous areas. ALT results remain relatively consistent compared to the control run. These outcomes align with our initial hypothesis, which anticipated that the reduced snow insulation in the Sturm run would lead to higher winter soil temperatures and a more accurate representation of permafrost physics. In summary, this thesis demonstrates significant advancements in understanding permafrost dynamics and its integration into LSMs. It has meticulously unraveled the intricacies involved in the interplay between heat transfer, soil properties, and snow dynamics in permafrost regions. These insights offer novel perspectives on model representation and performance.}, language = {en} } @phdthesis{Lysyakova2017, author = {Lysyakova, Liudmila}, title = {Interaction of azobenzene containing surfactants with plasmonic nanoparticles}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-403359}, school = {Universit{\"a}t Potsdam}, pages = {viii, 155}, year = {2017}, abstract = {The goal of this thesis is related to the question how to introduce and combine simultaneously plasmonic and photoswitching properties to different nano-objects. In this thesis I investigate the complexes between noble metal nanoparticles and cationic surfactants containing azobenzene units in their hydrophobic tail, employing absorption spectroscopy, surface zeta-potential, and electron microscopy. In the first part of the thesis, the formation of complexes between negatively charged laser ablated spherical gold nanoparticles and cationic azobenzene surfactants in trans- conformation is explored. It is shown that the constitution of the complexes strongly depends on a surfactant-to-gold molar ratio. At certain molar ratios, particle self-assembly into nanochains and their aggregation have been registered. At higher surfactant concentrations, the surface charge of nanoparticles turned positive, attributed to the formation of the stabilizing double layer of azobenzene surfactants on gold nanoparticle surfaces. These gold-surfactant complexes remained colloidally stable. UV light induced trans-cis isomerization of azobenzene surfactant molecules and thus perturbed the stabilizing surfactant shell, causing nanoparticle aggregation. The results obtained with silver and silicon nanoparticles mimick those for the comprehensively studied gold nanoparticles, corroborating the proposed model of complex formation. In the second part, the interaction between plasmonic metal nanoparticles (Au, Ag, Pd, alloy Au-Ag, Au-Pd), as well as silicon nanoparticles, and cis-isomers of azobenzene containing compounds is addressed. Cis-trans thermal isomerization of azobenzenes was enhanced in the presence of gold, palladium, and alloy gold-palladium nanoparticles. The influence of the surfactant structure and nanoparticle material on the azobenzene isomerization rate is expounded. Gold nanoparticles showed superior catalytic activity for thermal cis-trans isomerization of azobenzenes. In a joint project with theoretical chemists, we demonstrated that the possible physical origin of this phenomenon is the electron transfer between azobenzene moieties and nanoparticle surfaces. In the third part, complexes between gold nanorods and azobenzene surfactants with different tail length were exposed to UV and blue light, inducing trans-cis and cis-trans isomerization of surfactant, respectively. At the same time, the position of longitudinal plasmonic absorption maximum of gold nanorods experienced reversible shift responding to the changes in local dielectric environment. Surface plasmon resonance condition allowed the estimation of the refractive index of azobenzene containing surfactants in solution.}, language = {en} } @phdthesis{Schuermann2017, author = {Sch{\"u}rmann, Robin Mathis}, title = {Interaction of the potential DNA-radiosensitizer 8-bromoadenine with free and plasmonically generated electrons}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407017}, school = {Universit{\"a}t Potsdam}, pages = {xi, 120}, year = {2017}, abstract = {In Germany more than 200.000 persons die of cancer every year, which makes it the second most common cause of death. Chemotherapy and radiation therapy are often combined to exploit a supra-additive effect, as some chemotherapeutic agents like halogenated nucleobases sensitize the cancerous tissue to radiation. The radiosensitizing action of certain therapeutic agents can be at least partly assigned to their interaction with secondary low energy electrons (LEEs) that are generated along the track of the ionizing radiation. In the therapy of cancer DNA is an important target, as severe DNA damage like double strand breaks induce the cell death. As there is only a limited number of radiosensitizing agents in clinical practice, which are often strongly cytotoxic, it would be beneficial to get a deeper understanding of the interaction of less toxic potential radiosensitizers with secondary reactive species like LEEs. Beyond that LEEs can be generated by laser illuminated nanoparticles that are applied in photothermal therapy (PTT) of cancer, which is an attempt to treat cancer by an increase of temperature in the cells. However, the application of halogenated nucleobases in PTT has not been taken into account so far. In this thesis the interaction of the potential radiosensitizer 8-bromoadenine (8BrA) with LEEs was studied. In a first step the dissociative electron attachment (DEA) in the gas phase was studied in a crossed electron-molecular beam setup. The main fragmentation pathway was revealed as the cleavage of the C-Br bond. The formation of a stable parent anion was observed for electron energies around 0 eV. Furthermore, DNA origami nanostructures were used as platformed to determine electron induced strand break cross sections of 8BrA sensitized oligonucleotides and the corresponding nonsensitized sequence as a function of the electron energy. In this way the influence of the DEA resonances observed for the free molecules on the DNA strand breaks was examined. As the surrounding medium influences the DEA, pulsed laser illuminated gold nanoparticles (AuNPs) were used as a nanoscale electron source in an aqueous environment. The dissociation of brominated and native nucleobases was tracked with UV-Vis absorption spectroscopy and the generated fragments were identified with surface enhanced Raman scattering (SERS). Beside the electron induced damage, nucleobase analogues are decomposed in the vicinity of the laser illuminatednanoparticles due to the high temperatures. In order to get a deeper understanding of the different dissociation mechanisms, the thermal decomposition of the nucleobases in these systems was studied and the influence of the adsorption kinetics of the molecules was elucidated. In addition to the pulsed laser experiments, a dissociative electron transfer from plasmonically generated "hot electrons" to 8BrA was observed under low energy continuous wave laser illumination and tracked with SERS. The reaction was studied on AgNPs and AuNPs as a function of the laser intensity and wavelength. On dried samples the dissociation of the molecule was described by fractal like kinetics. In solution, the dissociative electron transfer was observed as well. It turned out that the timescale of the reaction rates were slightly below typical integration times of Raman spectra. In consequence such reactions need to be taken into account in the interpretation of SERS spectra of electrophilic molecules. The findings in this thesis help to understand the interaction of brominated nucleobases with plasmonically generated electrons and free electrons. This might help to evaluate the potential radiosensitizing action of such molecules in cancer radiation therapy and PTT.}, language = {en} } @phdthesis{Latza2020, author = {Latza, Victoria Maria}, title = {Interactions involving lipid-based surfaces}, doi = {10.25932/publishup-44559}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-445593}, school = {Universit{\"a}t Potsdam}, pages = {217}, year = {2020}, abstract = {Interactions involving biological interfaces such as lipid-based membranes are of paramount importance for all life processes. The same also applies to artificial interfaces to which biological matter is exposed, for example the surfaces of drug delivery systems or implants. This thesis deals with the two main types of interface interactions, namely (i) interactions between a single interface and the molecular components of the surrounding aqueous medium and (ii) interactions between two interfaces. Each type is investigated with regard to an important scientific problem in the fields of biotechnology and biology: 1.) The adsorption of proteins to surfaces functionalized with hydrophilic polymer brushes; a process of great biomedical relevance in context with harmful foreign-body-response to implants and drug delivery systems. 2.) The influence of glycolipids on the interaction between lipid membranes; a hitherto largely unexplored phenomenon with potentially great biological relevance. Both problems are addressed with the help of (quasi-)planar, lipid-based model surfaces in combination with x-ray and neutron scattering techniques which yield detailed structural insights into the interaction processes. Regarding the adsorption of proteins to brush-functionalized surfaces, the first scenario considered is the exposure of the surfaces to human blood serum containing a multitude of protein species. Significant blood protein adsorption was observed despite the functionalization, which is commonly believed to act as a protein repellent. The adsorption consists of two distinct modes, namely strong adsorption to the brush grafting surface and weak adsorption to the brush itself. The second aspect investigated was the fate of the brush-functionalized surfaces when exposed to aqueous media containing immune proteins (antibodies) against the brush polymer, an emerging problem in current biomedical applications. To this end, it was found that antibody binding cannot be prevented by variation of the brush grafting density or the polymer length. This result motivates the search for alternative, strictly non-antigenic brush chemistries. With respect to the influence of glycolipids on the interaction between lipid membranes, this thesis focused on the glycolipids' ability to crosslink and thereby to tightly attract adjacent membranes. This adherence is due to preferential saccharide-saccharide interactions occurring among the glycolipid headgroups. This phenomenon had previously been described for lipids with special oligo-saccharide motifs. Here, it was investigated how common this phenomenon is among glycolipids with a variety of more abundant saccharide-headgroups. It was found that glycolipid-induced membrane crosslinking is equally observed for some of these abundant glycolipid types, strongly suggesting that this under-explored phenomenon is potentially of great biological relevance.}, language = {en} } @phdthesis{Muench2018, author = {M{\"u}nch, Thomas}, title = {Interpretation of temperature signals from ice cores}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414963}, school = {Universit{\"a}t Potsdam}, pages = {xxi, 197}, year = {2018}, abstract = {Earth's climate varies continuously across space and time, but humankind has witnessed only a small snapshot of its entire history, and instrumentally documented it for a mere 200 years. Our knowledge of past climate changes is therefore almost exclusively based on indirect proxy data, i.e. on indicators which are sensitive to changes in climatic variables and stored in environmental archives. Extracting the data from these archives allows retrieval of the information from earlier times. Obtaining accurate proxy information is a key means to test model predictions of the past climate, and only after such validation can the models be used to reliably forecast future changes in our warming world. The polar ice sheets of Greenland and Antarctica are one major climate archive, which record information about local air temperatures by means of the isotopic composition of the water molecules embedded in the ice. However, this temperature proxy is, as any indirect climate data, not a perfect recorder of past climatic variations. Apart from local air temperatures, a multitude of other processes affect the mean and variability of the isotopic data, which hinders their direct interpretation in terms of climate variations. This applies especially to regions with little annual accumulation of snow, such as the Antarctic Plateau. While these areas in principle allow for the extraction of isotope records reaching far back in time, a strong corruption of the temperature signal originally encoded in the isotopic data of the snow is expected. This dissertation uses observational isotope data from Antarctica, focussing especially on the East Antarctic low-accumulation area around the Kohnen Station ice-core drilling site, together with statistical and physical methods, to improve our understanding of the spatial and temporal isotope variability across different scales, and thus to enhance the applicability of the proxy for estimating past temperature variability. The presented results lead to a quantitative explanation of the local-scale (1-500 m) spatial variability in the form of a statistical noise model, and reveal the main source of the temporal variability to be the mixture of a climatic seasonal cycle in temperature and the effect of diffusional smoothing acting on temporally uncorrelated noise. These findings put significant limits on the representativity of single isotope records in terms of local air temperature, and impact the interpretation of apparent cyclicalities in the records. Furthermore, to extend the analyses to larger scales, the timescale-dependency of observed Holocene isotope variability is studied. This offers a deeper understanding of the nature of the variations, and is crucial for unravelling the embedded true temperature variability over a wide range of timescales.}, language = {en} } @phdthesis{Dziourkevitch2005, author = {Dziourkevitch, Natalia}, title = {Interstellar turbulence driven by magneto-rotational instability}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5306}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {Origin and symmetry of the observed global magnetic fields in galaxies are not fully understood. We intend to clarify the question of the magnetic field origin and investigate the global action of the magneto-rotational instability (MRI) in galactic disks with the help of 3D global magneto-hydrodynamical (MHD) simulations. The calculations were done with the time-stepping ZEUS 3D code using massive parallelization. The alpha-Omega dynamo is known to be one of the most efficient mechanisms to reproduce the observed global galactic fields. The presence of strong turbulence is a pre-requisite for the alpha-Omega dynamo generation of the regular magnetic fields. The observed magnitude and spatial distribution of turbulence in galaxies present unsolved problems to theoreticians. The MRI is known to be a fast and powerful mechanism to generate MHD turbulence and to amplify magnetic fields. We find that the critical wavelength increases with the increasing of magnetic fields during the simulation, transporting the energy from critical to larger scales. The final structure, if not disrupted by supernovae explosions, is the structure of `thin layers' of thickness of about 100 pcs. An important outcome of all simulations is the magnitude of the horizontal components of the Reynolds and Maxwell stresses. The result is that the MRI-driven turbulence is magnetic-dominated: its magnetic energy exceeds the kinetic energy by a factor of 4. The Reynolds stress is small and less than 1\% of the Maxwell stress. The angular momentum transport is thus completely dominated by the magnetic field fluctuations. The volume-averaged pitch angle is always negative with a magnitude of about -30. The non-saturated MRI regime is lasting sufficiently long to fill the time between the galactic encounters, independently of strength and geometry of the initial field. Therefore, we may claim the observed pitch angles can be due to MRI action in the gaseous galactic disks. The MRI is also shown to be a very fast instability with e-folding time proportional to the time of one rotation. Steep rotation curves imply a stronger growth for the magnetic energy due to MRI. The global e-folding time is from 44 Myr to 100 Myr depending on the rotation profile. Therefore, MRI can explain the existence of rather large magnetic field in very young galaxies. We also have reproduced the observed rms values of velocities in the interstellar turbulence as it was observed in NGC 1058. We have shown with the simulations that the averaged velocity dispersion of about 5 km/s is a typical number for the MRI-driven turbulence in galaxies, which agrees with observations. The dispersion increases outside of the disk plane, whereas supernovae-driven turbulence is found to be concentrated within the disk. In our simulations the velocity dispersion increases a few times with the heights. An additional support to the dynamo alpha-effect in the galaxies is the ability of the MRI to produce a mix of quadrupole and dipole symmetries from the purely vertical seed fields, so it also solves the seed-fields problem of the galactic dynamo theory. The interaction of magneto-rotational instability and random supernovae explosions remains an open question. It would be desirable to run the simulation with the supernovae explosions included. They would disrupt the calm ring structure produced by global MRI, may be even to the level when we can no longer blame MRI to be responsible for the turbulence.}, subject = {Magnetohydrodynamik}, language = {en} } @phdthesis{Prevot2006, author = {Prevot, Michelle Elizabeth}, title = {Introduction of a thermo-sensitive non-polar species into polyelectrolyte multilayer capsules for drug delivery}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7785}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {The layer-by-layer assembly (LBL) of polyelectrolytes has been extensively studied for the preparation of ultrathin films due to the versatility of the build-up process. The control of the permeability of these layers is particularly important as there are potential drug delivery applications. Multilayered polyelectrolyte microcapsules are also of great interest due to their possible use as microcontainers. This work will present two methods that can be used as employable drug delivery systems, both of which can encapsulate an active molecule and tune the release properties of the active species. Poly-(N-isopropyl acrylamide), (PNIPAM) is known to be a thermo-sensitive polymer that has a Lower Critical Solution Temperature (LCST) around 32oC; above this temperature PNIPAM is insoluble in water and collapses. It is also known that with the addition of salt, the LCST decreases. This work shows Differential Scanning Calorimetry (DSC) and Confocal Laser Scanning Microscopy (CLSM) evidence that the LCST of the PNIPAM can be tuned with salt type and concentration. Microcapsules were used to encapsulate this thermo-sensitive polymer, resulting in a reversible and tunable stimuli- responsive system. The encapsulation of the PNIPAM inside of the capsule was proven with Raman spectroscopy, DSC (bulk LCST measurements), AFM (thickness change), SEM (morphology change) and CLSM (in situ LCST measurement inside of the capsules). The exploitation of the capsules as a microcontainer is advantageous not only because of the protection the capsules give to the active molecules, but also because it facilitates easier transport. The second system investigated demonstrates the ability to reduce the permeability of polyelectrolyte multilayer films by the addition of charged wax particles. The incorporation of this hydrophobic coating leads to a reduced water sensitivity particularly after heating, which melts the wax, forming a barrier layer. This conclusion was proven with Neutron Reflectivity by showing the decreased presence of D2O in planar polyelectrolyte films after annealing creating a barrier layer. The permeability of capsules could also be decreased by the addition of a wax layer. This was proved by the increase in recovery time measured by Florescence Recovery After Photobleaching, (FRAP) measurements. In general two advanced methods, potentially suitable for drug delivery systems, have been proposed. In both cases, if biocompatible elements are used to fabricate the capsule wall, these systems provide a stable method of encapsulating active molecules. Stable encapsulation coupled with the ability to tune the wall thickness gives the ability to control the release profile of the molecule of interest.}, subject = {Mikrokapsel}, language = {en} } @phdthesis{Rezanezhad2016, author = {Rezanezhad, Vahid}, title = {Inversion of the 2004 M6.0 Parkfield Earthquake Coseismic Offsets by Partition Model}, school = {Universit{\"a}t Potsdam}, pages = {83}, year = {2016}, language = {en} } @phdthesis{TchoumbaKwamen2018, author = {Tchoumba Kwamen, Christelle Larodia}, title = {Investigating the dynamics of polarization reversal in ferroelectric thin films by time-resolved X-ray diffraction}, doi = {10.25932/publishup-42781}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427815}, school = {Universit{\"a}t Potsdam}, pages = {xvii, 126, xxiii}, year = {2018}, abstract = {Ferroic materials have attracted a lot of attention over the years due to their wide range of applications in sensors, actuators, and memory devices. Their technological applications originate from their unique properties such as ferroelectricity and piezoelectricity. In order to optimize these materials, it is necessary to understand the coupling between their nanoscale structure and transient response, which are related to the atomic structure of the unit cell. In this thesis, synchrotron X-ray diffraction is used to investigate the structure of ferroelectric thin film capacitors during application of a periodic electric field. Combining electrical measurements with time-resolved X-ray diffraction on a working device allows for visualization of the interplay between charge flow and structural motion. This constitutes the core of this work. The first part of this thesis discusses the electrical and structural dynamics of a ferroelectric Pt/Pb(Zr0.2,Ti0.8)O3/SrRuO3 heterostructure during charging, discharging, and polarization reversal. After polarization reversal a non-linear piezoelectric response develops on a much longer time scale than the RC time constant of the device. The reversal process is inhomogeneous and induces a transient disordered domain state. The structural dynamics under sub-coercive field conditions show that this disordered domain state can be remanent and can be erased with an appropriate voltage pulse sequence. The frequency-dependent dynamic characterization of a Pb(Zr0.52,Ti0.48)O3 layer, at the morphotropic phase boundary, shows that at high frequency, the limited domain wall velocity causes a phase lag between the applied field and both the structural and electrical responses. An external modification of the RC time constant of the measurement delays the switching current and widens the electromechanical hysteresis loop while achieving a higher compressive piezoelectric strain within the crystal. In the second part of this thesis, time-resolved reciprocal space maps of multiferroic BiFeO3 thin films were measured to identify the domain structure and investigate the development of an inhomogeneous piezoelectric response during the polarization reversal. The presence of 109° domains is evidenced by the splitting of the Bragg peak. The last part of this work investigates the effect of an optically excited ultrafast strain or heat pulse propagating through a ferroelectric BaTiO3 layer, where we observed an additional current response due to the laser pulse excitation of the metallic bottom electrode of the heterostructure.}, language = {en} } @phdthesis{Petsiuk2021, author = {Petsiuk, Andrei}, title = {Investigation of charge carrier transport in metal halide perovskites by THz Spectroscopy}, doi = {10.25932/publishup-51544}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-515441}, school = {Universit{\"a}t Potsdam}, pages = {118}, year = {2021}, abstract = {Halide perovskites are a class of novel photovoltaic materials that have recently attracted much attention in the photovoltaics research community due to their highly promising optoelectronic properties, including large absorption coefficients and long carrier lifetimes. The charge carrier mobility of halide perovskites is investigated in this thesis by THz spectroscopy, which is a contact-free technique that yields the intra-grain sum mobility of electrons and holes in a thin film. The polycrystalline halide perovskite thin films, provided from Potsdam University, show moderate mobilities in the range from 21.5 to 33.5 cm2V-1s-1. It is shown in this work that the room temperature mobility is limited by charge carrier scattering at polar optical phonons. The mobility at low temperature is likely to be limited by scattering at charged and neutral impurities at impurity concentration N=1017-1018 cm-3. Furthermore, it is shown that exciton formation may decrease the mobility at low temperatures. Scattering at acoustic phonons can be neglected at both low and room temperatures. The analysis of mobility spectra over a broad range of temperatures for perovskites with various cation compounds shows that cations have a minor impact on charge carrier mobility. The low-dimensional thin films of quasi-2D perovskite with different numbers of [PbI6]4-sheets (n=2-4) alternating with long organic spacer molecules were provided by S. Zhang from Potsdam University. They exhibit mobilities in the range from 3.7 to 8 cm2V-1s-1. A clear decrease of mobility is observed with decrease in number of metal-halide sheets n, which likely arises from charge carrier confinement within metal-halide layers. Modelling the measured THz mobility with the modified Drude-Smith model yields localization length from 0.9 to 3.7 nm, which agrees well on the thicknesses of the metal-halide layers. Additionally, the mobilities are found to be dependent on the orientation of the layers. The charge carrier dynamics is also dependent on the number of metal-halide sheets n. For the thin films with n =3-4 the dynamics is similar to the 3D MHPs. However, the thin film with n = 2 shows clearly different dynamics, where the signs of exciton formation are observed within 390 fs timeframe after photoexcitation. Also, the charge carrier dynamics of CsPbI3 perovskite nanocrystals was investigated, in particular the effect of post treatments on the charge carrier transport.}, language = {en} } @phdthesis{Sajedi2023, author = {Sajedi, Maryam}, title = {Investigation of metal-halide-perovskites by state-of-the-art synchrotron-radiation methods}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 149}, year = {2023}, abstract = {My thesis chiefly aims to shed light on the favourable properties of LHP semiconductors from the point of view of their electronic structure. Currently, various hypotheses are circulating to explain the exceptionally favourable transport properties of LHPs. Seeking an explanation for the low non-radiative recombination rates and long carrier lifetimes is particularly interesting to the halide perovskites research community. The first part of this work investigates the two main hypotheses that are believed to play a significant role: the existence of a giant Rashba effect and large polarons. The experimental method of ARPES is mainly applied to verify their credibility. The first hypothesis presumes that a giant Rashba effect restricts the recombination losses of the charge carriers by making the band gap slightly indirect. The Rashba effect is based on a strong SOC that could appear in LHPs thanks to incorporating the heavy element Pb in their structure. Earlier experimental work had pointed out this effect at the VBM of a hybrid LHP as a viable explanation for the long lifetimes of the charge carriers. My systematic ARPES studies on hybrid MAPbBr3 and spin-resolved ARPES studies on the inorganic CsPbBr3 disprove the presence of any Rashba effect in the VBM of the reported order of magnitude. Therefore, neither the spin texture nor an indirect band gap character at the VBM in the bulk or at the surface can explain the high efficiency of LHP. In case of existence, this effect is in terms of the Rashba parameter at least a factor of a hundred smaller than previously assumed. The second hypothesis proposes large polaron formation in the electronic structure of LHPs and attributes it to their high defect tolerance and low non-radiative recombination rate. Because the perovskite structure consists of negative and positive ions, polarons of this kind can be expected due to the Coulomb interaction between carriers and the polar lattice at intermediate electron-phonon coupling strength. Their existence is proposed to screen the carriers and defects to avoid recombination and trapping, thus leading to long carrier lifetimes. ARPES results by one group supported this assumption, reporting a 50\% effective mass enhancement over the theoretical effective mass for CsPbBr3 in the orthorhombic structure. The current thesis examines this hypothesis experimentally by photon-energy-dependent ARPES spectra and theoretically by GW band calculations of CsPbBr3 perovskites. The investigation is based on the fact that a polaron contribution in charge transport can become evident by an increase of the effective mass as measured by ARPES over the calculated one without polaron effects. However, my experiments on crystalline CsPbBr3 did not imply a larger effective mass for which one could postulate large polarons. In fact, the effective masses determined from ARPES agree with that of theoretical predictions. The second part of my thesis thoroughly investigates the possibility of spontaneously magnetizing LHPs by introducing Mn2+ ions. Mn doping was reported to cause ferromagnetism in one of the most common LHPs, MAPbI3, mediated by super-exchange. The current work investigates the magnetic properties of a wide concentration range of Mn-doped MAPbI3 and triple-cation films by XAS, XMCD, and SQUID measurements. Based on the XAS line shape and a sum-rule analysis of the XMCD spectra, a pure Mn2+ configuration has been confirmed. Negative Curie temperatures are extracted from fitting the magnetization with a Curie-Weiss law. However, a remanent magnetization, which would be an indication of the absence of ferromagnetism down to 2K. As far as the double exchange is concerned, the element-specific XAS excludes a sufficient amount of Mn3+ as a prerequisite for this mechanism. All the findings show no evidence of significant double exchange or ferromagnetism in Mn-doped LHPs. The magnetic behavior is paramagnetic rather than ferromagnetic. In the dissertation's last chapter, orthorhombic features of CsPbBr3 are revealed by ARPES, including an extra VBM at the Γ-point. The VBM of CsPbBr3 shows a temperature-dependent splitting, which decreases by 190 meV between 38K and 300K and tracks a shift of a saddle point at the cubic M-point. It is possible to reproduce the energy shift using an atomic model with a larger unit cell for room temperature, allowing local inversion symmetry breaking. This indicates the importance of electric dipoles for the inorganic LHPs, which may contribute to their high efficiency by breaking inversion symmetry and a Berry-phase effect.}, language = {en} } @phdthesis{Velk2022, author = {Velk, Natalia}, title = {Investigation of the interaction of lysozyme with poly(l-lysine)/hyaluronic acid multilayers}, school = {Universit{\"a}t Potsdam}, pages = {85}, year = {2022}, language = {en} } @phdthesis{Stachlewska2005, author = {Stachlewska, Iwona Sylwia}, title = {Investigation of tropospheric arctic aerosol and mixed-phase clouds using airborne lidar technique}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6984}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {An Airborne Mobile Aerosol Lidar (AMALi) was constructed and built at Alfred-Wegener-Institute for Polar and Marine Research (AWI) in Potsdam, Germany for the lower tropospheric aerosol and cloud research under tough arctic conditions. The system was successfully used during two AWI airborne field campaigns, ASTAR 2004 and SVALEX 2005, performed in vicinity of Spitsbergen in the Arctic. The novel evaluation schemes, the Two-Stream Inversion and the Iterative Airborne Inversion, were applied to the obtained lidar data. Thereby, calculation of the particle extinction and backscatter coefficient profiles with corresponding lidar ratio profiles characteristic for the arctic air was possible. The comparison of these lidar results with the results of other in-situ and remote instrumentation (ground based Koldewey Aerosol Raman Lidar (KARL), sunphotometer, radiosounding, satellite imagery) allowed to provided clean contra polluted (Arctic Haze) characteristics of the arctic aerosols. Moreover, the data interpretation by means of the ECMWF Operational Analyses and small-scale dispersion model EULAG allowed studying the effects of the Spitsbergens orography on the aerosol load in the Planetary Boundary Layer. With respect to the cloud studies a new methodology of alternated remote AMALi measurements with the airborne in-situ cloud optical and microphysical parameters measurements was proved feasible for the low density mixed-phase cloud studies. An example of such approach during observation of the natural cloud seeding (feeder-seeder phenomenon) with ice crystals precipitating into the lower supercooled stratocumulus deck were discussed in terms of the lidar signal intensity profiles and corresponding depolarisation ratio profiles. For parts of the cloud system characterised by almost negligible multiple scattering the calculation of the particle backscatter coefficient profiles was possible using the lidar ratio information obtained from the in-situ measurements in ice-crystal cloud and water cloud.}, subject = {Aerosol}, language = {en} } @phdthesis{Magkos2023, author = {Magkos, Sotirios}, title = {Iterative reconstruction from under-sampled Computed Tomography data}, doi = {10.25932/publishup-57278}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-572789}, school = {Universit{\"a}t Potsdam}, pages = {xxii, 74}, year = {2023}, abstract = {In X-ray computed tomography (XCT), an X-ray beam of intensity I0 is transmitted through an object and its attenuated intensity I is measured when it exits the object. The attenuation of the beam depends on the attenuation coefficients along its path. The attenuation coefficients provide information about the structure and composition of the object and can be determined through mathematical operations that are referred to as reconstruction. The standard reconstruction algorithms are based on the filtered backprojection (FBP) of the measured data. While these algorithms are fast and relatively simple, they do not always succeed in computing a precise reconstruction, especially from under-sampled data. Alternatively, an image or volume can be reconstructed by solving a system of linear equations. Typically, the system of equations is too large to be solved but its solution can be approximated by iterative methods, such as the Simultaneous Iterative Reconstruction Technique (SIRT) and the Conjugate Gradient Least Squares (CGLS). This dissertation focuses on the development of a novel iterative algorithm, the Direct Iterative Reconstruction of Computed Tomography Trajectories (DIRECTT). After its reconstruction principle is explained, its performance is assessed for real parallel- and cone-beam CT (including under-sampled) data and compared to that of other established algorithms. Finally, it is demonstrated how the shape of the measured object can be modelled into DIRECTT to achieve even better reconstruction results.}, language = {en} } @phdthesis{Littmann2024, author = {Littmann, Daniela-Christin}, title = {Large eddy simulations of the Arctic boundary layer around the MOSAiC drift track}, doi = {10.25932/publishup-62437}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-624374}, school = {Universit{\"a}t Potsdam}, pages = {xii, 110}, year = {2024}, abstract = {The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km. The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term. The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions. The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models.}, language = {en} } @phdthesis{Feldmann2018, author = {Feldmann, David}, title = {Light-driven diffusioosmosis}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-417184}, school = {Universit{\"a}t Potsdam}, pages = {viii, 150}, year = {2018}, abstract = {The emergence of microfluidics created the need for precise and remote control of micron-sized objects. I demonstrate how light-sensitive motion can be induced at the micrometer scale by a simple addition of a photosensitive surfactant, which makes it possible to trigger hydrophobicity with light. With point-like laser irradiation, radial inward and outward hydrodynamic surface flows are remotely switched on and off. In this way, ensembles of microparticles can be moved toward or away from the irradiation center. Particle motion is analyzed according to varying parameters, such as surfactant and salt concentration, illumination condition, surface hydrophobicity, and surface structure. The physical origin of this process is the so-called light-driven diffusioosmosis (LDDO), a phenomenon that was discovered in the framework of this thesis and is described experimentally and theoretically in this work. To give a brief explanation, a focused light irradiation induces a local photoisomerization that creates a concentration gradient at the solid-liquid interface. To compensate for the change in osmotic pressure near the surface, a hydrodynamic flow along the surface is generated. Surface-surfactant interaction largely governs LDDO. It is shown that surfactant adsorption depends on the isomerization state of the surfactant. Photoisomerization, therefore, triggers a surfactant attachment or detachment from the surface. This change is considered to be one of the reasons for the formation of LDDO flow. These flows are introduced not only by a focused laser source but also by global irradiation. Porous particles show reversible repulsive and attractive interactions when dispersed in the solution of photosensitive surfactant. Repulsion and attraction is controlled by the irradiation wavelength. Illumination with red light leads to formation of aggregates, while illumination with blue light leads to the formation of a well-separated grid with equal interparticle distances, between 2µm and 80µm, depending on the particle surface density. These long-range interactions are considered to be a result of an increase or decrease of surfactant concentration around each particle, depending on the irradiation wavelength. Surfactant molecules adsorb inside the pores of the particles. A light-induced photoisomerization changes adsorption to the pores and drives surfactant molecules to the outside. The concentration gradients generate symmetric flows around each single particle resulting in local LDDO. With a break of the symmetry (i.e., by closing one side of the particle with a metal cap), one can achieve active self-propelled particle motion.}, language = {en} } @phdthesis{ZamoraLopez2009, author = {Zamora-L{\´o}pez, Gorka}, title = {Linking structure and function of complex cortical networks}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52257}, school = {Universit{\"a}t Potsdam}, year = {2009}, abstract = {The recent discovery of an intricate and nontrivial interaction topology among the elements of a wide range of natural systems has altered the manner we understand complexity. For example, the axonal fibres transmitting electrical information between cortical regions form a network which is neither regular nor completely random. Their structure seems to follow functional principles to balance between segregation (functional specialisation) and integration. Cortical regions are clustered into modules specialised in processing different kinds of information, e.g. visual or auditory. However, in order to generate a global perception of the real world, the brain needs to integrate the distinct types of information. Where this integration happens, nobody knows. We have performed an extensive and detailed graph theoretical analysis of the cortico-cortical organisation in the brain of cats, trying to relate the individual and collective topological properties of the cortical areas to their function. We conclude that the cortex possesses a very rich communication structure, composed of a mixture of parallel and serial processing paths capable of accommodating dynamical processes with a wide variety of time scales. The communication paths between the sensory systems are not random, but largely mediated by a small set of areas. Far from acting as mere transmitters of information, these central areas are densely connected to each other, strongly indicating their functional role as integrators of the multisensory information. In the quest of uncovering the structure-function relationship of cortical networks, the peculiarities of this network have led us to continuously reconsider the stablished graph measures. For example, a normalised formalism to identify the "functional roles" of vertices in networks with community structure is proposed. The tools developed for this purpose open the door to novel community detection techniques which may also characterise the overlap between modules. The concept of integration has been revisited and adapted to the necessities of the network under study. Additionally, analytical and numerical methods have been introduced to facilitate understanding of the complicated statistical interrelations between the distinct network measures. These methods are helpful to construct new significance tests which may help to discriminate the relevant properties of real networks from side-effects of the evolutionary-growth processes.}, language = {en} } @phdthesis{Zakrevskyy2006, author = {Zakrevskyy, Yuriy}, title = {Liquid crystallinity and alignment of ionic self-assembly complexes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-10048}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {In this work the first observation of new type of liquid crystals is presented. This is ionic self-assembly (ISA) liquid crystals formed by introduction of oppositely charged ions between different low molecular tectonic units. As practically all conventional liquid crystals consist of rigid core and alkyl chains the attention is focused to the simplest case where oppositely charged ions are placed between a rigid core and alkyl tails. The aim of this work is to investigate and understand liquid crystalline and alignment properties of these materials. It was found that ionic interactions within complexes play the main role. Presence of these interactions restricts transition to isotropic phase. In addition, these interactions hold the system (like network) allowing crystallization into a single domain from aligned LC state. Alignment of these simple ISA complexes was spontaneous on a glass substrate. In order to show potentials for application perylenediimide and azobenzene containing ISA complexes have been investigated for correlations between phase behavior and their alignment properties. The best results of macroscopic alignment of perylenediimide-based ISA complexes have been obtained by zone-casting method. In the aligned films the columns of the complex align perpendicular to the phase-transition front. The obtained anisotropy (DR = 18) is thermally stable. The investigated photosensitive (azobenzene-based) ISA complexes show formation of columnar LC phases. It was demonstrated that photo alignment of such complexes was very effective (DR = 50 has been obtained). It was shown that photo-reorientation in the photosensitive ISA complexes is cooperative process. The size of domains has direct influence on efficiency of the photo-reorientation process. In the case of small domains the photo-alignment is the most effective. Under irradiation with linearly polarized light domains reorient in the plane of the film leading to macroscopic alignment of columns parallel to the light polarization and joining of small domains into big ones. Finally, the additional distinguishable properties of the ISA liquid crystalline complexes should be noted: (I) the complexes do not solve in water but readily solve in organic solvents; (II) the complexes have good film-forming properties when cast or spin-coated from organic solvent; (III) alignment of the complexes depends on their structure and secondary interactions between tectonic units.}, subject = {Fl{\"u}ssigkristall}, language = {en} } @phdthesis{Imperia2002, author = {Imperia, Paolo}, title = {Localised states in organic semiconductors and their detection}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000477}, school = {Universit{\"a}t Potsdam}, year = {2002}, abstract = {In den letzten Jahren ist eine Vielzahl neuer organischer Polymere und niedermolekularer Verbindungen synthetisiert worden, die sich als aktive Komponente f{\"u}r Elektrolumineszenz-Bauelemente und andere elektronische Anwendungen eignen. Trotz der großen technologischen Bedeutung und des erheblichen Fortschrittes, der bei der Herstellung solcher Materialien erzielt worden ist, sind grundlegende physikalische Eigenschaften dieser Materialklassen noch nicht ausreichend erforscht. Insbesondere das Auftreten lokalisierter Zust{\"a}nde innerhalb der Bandl{\"u}cke hat besondere Bedeutung f{\"u}r ihre elektronischen Eigenschaften. Sowohl die Pr{\"a}senz dieser flachen traps (Fallen, L{\"o}cher) als auch der Einfluß der Herstellungsbedingungen auf die tiefen und flachen lokalisierten Zust{\"a}nde wurden bisher nicht systematisch untersucht. Thermische Techniken sind wichtige Methoden, um lokalisierte Niveaus in organischen und anorganischen Materialien zu erforschen. Themisch-Stimulierte Lumineszenz (TSL), Thermisch-Stimulierte Str{\"o}me (TSC) und Thermisch-Stimulierte Depolarisierte Str{\"o}me (TSDC) erm{\"o}glichen die Untersuchung flacher und tiefer traps; in Verbindung mit DiElektrischer Spektroskopie (DES) k{\"o}nnen außerdem Polarisations- und Depolarisationseffekte studiert werden. Mit Hilfe numerischer Simulationen haben wir die kinetischen Gleichungen erster und zweiter Ordnung untersucht, die sich durch schwaches bzw. starkes Wieder-Fangen beschreiben lassen. In diesen Gleichungen haben wir Gaussian-, exponentielle und quasi-kontinuierliche Verteilungen von lokalisierten Zust{\"a}nde ber{\"u}cksichtigt. Durch Ver{\"a}nderung der beiden wichtigsten Parameter (Tiefe der traps E und H{\"a}ufigkeit) konnte die Form der thermischen Maxima untersucht werden. Auch die die Gaussian-Verteilung bestimmenden Faktoren wurden ver{\"a}ndert. Diese theoretischen Ergebnisse wurden auf die experimentellen Glow-Kurven angewandt. D{\"u}nne Filme aus polymeren und niedermolekularen Verbindungen (Polyphenylquinoxaline, Trisphenylquinoxaline und Oxadiazole), die wegen ihrer technologischen Bedeutung ausgew{\"a}hlt wurden, zeigen komplexes thermisches Verhalten. Insbesondere hoch geordnete Filme eines amphiphil substituierten 2-(p-nitrophenyl)-5-(p-undecylamidophenyl)-1,3,4-oxadiazols (NADPO) zeichnen sich durch komplexe TSL-Diagramme aus. Im Bereich von Em = 4 meV wurde eine Region flacher traps gefunden. Zwei weitere TSL-Maxima treten bei Tm = 221.5 K bzw. Tm = 254.2 K auf. Sie besitzen Aktivierungsenergien von Em= 0.63 eV bzw. Em = 0.66 eV, ihre Frequenzfaktoren betragen s = 2.4x1012 s-1 bzw. s = 1.85x1011 s-1, sie zeigen Breiten der Verteilung von s = 0.045 eV bzw. s = 0.088 eV. Des weiteren zeigt diese Arbeit, daß die Form der Glow-Kurven stark von der Anregungstemperatur und vom thermischen Kreislauf beeinflußt wird.}, language = {en} } @phdthesis{Hintsche2018, author = {Hintsche, Marius}, title = {Locomotion of a bacterium with a polar bundle of flagella}, doi = {10.25932/publishup-42697}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426972}, school = {Universit{\"a}t Potsdam}, pages = {xi, 108}, year = {2018}, abstract = {Movement and navigation are essential for many organisms during some parts of their lives. This is also true for bacteria, which can move along surfaces and swim though liquid environments. They are able to sense their environment, and move towards environmental cues in a directed fashion. These abilities enable microbial lifecyles in biofilms, improved food uptake, host infection, and many more. In this thesis we study aspects of the swimming movement - or motility - of the soil bacterium (P. putida). Like most bacteria, P. putida swims by rotating its helical flagella, but their arrangement differs from the main model organism in bacterial motility research: (E. coli). P. putida is known for its intriguing motility strategy, where fast and slow episodes can occur after each other. Up until now, it was not known how these two speeds can be produced, and what advantages they might confer to this bacterium. Normally the flagella, the main component of thrust generation in bacteria, are not observable by ordinary light microscopy. In order to elucidate this behavior, we therefore used a fluorescent staining technique on a mutant strain of this species to specifically label the flagella, while leaving the cell body only faintly stained. This allowed us to image the flagella of the swimming bacteria with high spacial and temporal resolution with a customized high speed fluorescence microscopy setup. Our observations show that P. putida can swim in three different modes. First, It can swim with the flagella pushing the cell body, which is the main mode of swimming motility previously known from other bacteria. Second, it can swim with the flagella pulling the cell body, which was thought not to be possible in situations with multiple flagella. Lastly, it can wrap its flagellar bundle around the cell body, which results in a speed wich is slower by a factor of two. In this mode, the flagella are in a different physical conformation with a larger radius so the cell body can fit inside. These three swimming modes explain the previous observation of two speeds, as well as the non strict alternation of the different speeds. Because most bacterial swimming in nature does not occur in smoothly walled glass enclosures under a microscope, we used an artificial, microfluidic, structured system of obstacles to study the motion of our model organism in a structured environment. Bacteria were observed in microchannels with cylindrical obstacles of different sizes and with different distances with video microscopy and cell tracking. We analyzed turning angles, run times, and run length, which we compared to a minimal model for movement in structured geometries. Our findings show that hydrodynamic interactions with the walls lead to a guiding of the bacteria along obstacles. When comparing the observed behavior with the statics of a particle that is deflected with every obstacle contact, we find that cells run for longer distances than that model. Navigation in chemical gradients is one of the main applications of motility in bacteria. We studied the swimming response of P. putida cells to chemical stimuli (chemotaxis) of the common food preservative sodium benzoate. Using a microfluidic gradient generation device, we created gradients of varying strength, and observed the motion of cells with a video microscope and subsequent cell tracking. Analysis of different motility parameters like run lengths and times, shows that P. putida employs the classical chemotaxis strategy of E. coli: runs up the gradient are biased to be longer than those down the gradient. Using the two different run speeds we observed due to the different swimming modes, we classify runs into `fast' and `slow' modes with a Gaussian mixture model (GMM). We find no evidence that P. putida's uses its swimming modes to perform chemotaxis. In most studies of bacterial motility, cell tracking is used to gather trajectories of individual swimming cells. These trajectories then have to be decomposed into run sections and tumble sections. Several algorithms have been developed to this end, but most require manual tuning of a number of parameters, or extensive measurements with chemotaxis mutant strains. Together with our collaborators, we developed a novel motility analysis scheme, based on generalized Kramers-Moyal-coefficients. From the underlying stochastic model, many parameters like run length etc., can be inferred by an optimization procedure without the need for explicit run and tumble classification. The method can, however, be extended to a fully fledged tumble classifier. Using this method, we analyze E. coli chemotaxis measurements in an aspartate analog, and find evidence for a chemotactic bias in the tumble angles.}, language = {en} } @phdthesis{Bostroem2004, author = {Bostr{\"o}m, Kim}, title = {Lossless quantum data compression and secure direct communication}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001383}, school = {Universit{\"a}t Potsdam}, year = {2004}, abstract = {Diese Dissertation behandelt die Kodierung und Verschickung von Information durch einen Quantenkanal. Ein Quantenkanal besteht aus einem quantenmechanischen System, welches vom Sender manipuliert und vom Empf{\"a}nger ausgelesen werden kann. Dabei repr{\"a}sentiert der individuelle Zustand des Kanals die Nachricht. Die zwei Themen der Dissertation umfassen 1) die M{\"o}glichkeit, eine Nachricht in einem Quantenkanal verlustfrei zu komprimieren und 2) die M{\"o}glichkeit eine Nachricht von einer Partei zu einer einer anderen direkt und auf sichere Weise zu {\"u}bermitteln, d.h. ohne dass es einer dritte Partei m{\"o}glich ist, die Nachricht abzuh{\"o}ren und dabei unerkannt zu bleiben. Die wesentlichen Ergebnisse der Dissertation sind die folgenden. Ein allgemeiner Formalismus f{\"u}r Quantencodes mit variabler L{\"a}nge wird ausgearbeitet. Diese Codes sind notwendig um verlustfreie Kompression zu erm{\"o}glichen. Wegen der Quantennatur des Kanals sind die codierten Nachrichten allgemein in einer Superposition von verschiedenen L{\"a}ngen. Es zeigt sich, daß es unm{\"o}glich ist eine Quantennachricht verlustfrei zu komprimieren, wenn diese dem Sender nicht apriori bekannt ist. Im anderen Falle wird die M{\"o}glichkeit verlustfreier Quantenkompression gezeigt und eine untere Schranke f{\"u}r die Kompressionsrate abgeleitet. Des weiteren wird ein expliziter Kompressionsalgorithmus konstruiert, der f{\"u}r beliebig vorgegebene Ensembles aus Quantennachrichten funktioniert. Ein quantenkryptografisches Prokoll - das \“Ping-Pong Protokoll\” - wird vorgestellt, welches die sichere direkte {\"u}bertragung von klassischen Nachrichten durch einen Quantenkanal erm{\"o}glicht. Die Sicherheit des Protokolls gegen beliebige Abh{\"o}rangriffe wird bewiesen f{\"u}r den Fall eines idealen Quantenkanals. Im Gegensatz zu anderen quantenkryptografischen Verfahren ist das Ping-Pong Protokoll deterministisch und kann somit sowohl f{\"u}r die {\"U}bermittlung eines zuf{\"a}lligen Schl{\"u}ssels als auch einer komponierten Nachricht verwendet werden. Das Protokoll is perfekt sicher f{\"u}r die {\"U}bertragung eines Schl{\"u}ssels und quasi-sicher f{\"u}r die direkte {\"U}bermittlung einer Nachricht. Letzteres bedeutet, dass die Wahrscheinlichkeit eines erfolgreichen Abh{\"o}rangriffs exponenziell mit der L{\"a}nge der Nachricht abnimmt.}, language = {en} } @phdthesis{Ghaisari2017, author = {Ghaisari, Sara}, title = {Magnetic anisotropy analysis of magnetic nanoparticles in magnetotactic bacteria}, school = {Universit{\"a}t Potsdam}, pages = {115}, year = {2017}, language = {en} } @phdthesis{Zhang2008, author = {Zhang, Bo}, title = {Magnetic fields near microstructured surfaces : application to atom chips}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-28984}, school = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {Microfabricated solid-state surfaces, also called atom chip', have become a well-established technique to trap and manipulate atoms. This has simplified applications in atom interferometry, quantum information processing, and studies of many-body systems. Magnetic trapping potentials with arbitrary geommetries are generated with atom chip by miniaturized current-carrying conductors integrated on a solid substrate. Atoms can be trapped and cooled to microKelvin and even nanoKelvin temperatures in such microchip trap. However, cold atoms can be significantly perturbed by the chip surface, typically held at room temperature. The magnetic field fluctuations generated by thermal currents in the chip elements may induce spin flips of atoms and result in loss, heating and decoherence. In this thesis, we extend previous work on spin flip rates induced by magnetic noise and consider the more complex geometries that are typically encountered in atom chips: layered structures and metallic wires of finite cross-section. We also discuss a few aspects of atom chips traps built with superconducting structures that have been suggested as a means to suppress magnetic field fluctuations. The thesis describes calculations of spin flip rates based on magnetic Green functions that are computed analytically and numerically. For a chip with a top metallic layer, the magnetic noise depends essentially on the thickness of that layer, as long as the layers below have a much smaller conductivity. Based on this result, scaling laws for loss rates above a thin metallic layer are derived. A good agreement with experiments is obtained in the regime where the atom-surface distance is comparable to the skin depth of metal. Since in the experiments, metallic layers are always etched to separate wires carrying different currents, the impact of the finite lateral wire size on the magnetic noise has been taken into account. The local spectrum of the magnetic field near a metallic microstructure has been investigated numerically with the help of boundary integral equations. The magnetic noise significantly depends on polarizations above flat wires with finite lateral width, in stark contrast to an infinitely wide wire. Correlations between multiple wires are also taken into account. In the last part, superconducting atom chips are considered. Magnetic traps generated by superconducting wires in the Meissner state and the mixed state are studied analytically by a conformal mapping method and also numerically. The properties of the traps created by superconducting wires are investigated and compared to normal conducting wires: they behave qualitatively quite similar and open a route to further trap miniaturization, due to the advantage of low magnetic noise. We discuss critical currents and fields for several geometries.}, language = {en} } @phdthesis{Memola2002, author = {Memola, Elisabetta}, title = {Magnetic jets from accretion disks : field structure and X-ray emission}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000458}, school = {Universit{\"a}t Potsdam}, year = {2002}, abstract = {Astrophysikalische Jets sind stark kollimierte Materiestr{\"o}mungen hoher Geschwindigkeit. Sie stehen im Zusammenhang mit einer F{\"u}lle verschiedener astrophysikalischer Objekte wie jungen Sternen, stellaren schwarzen L{\"o}chern ('Mikro-Quasare'), Galaxien mit aktivem Kern (AGN) und wahrscheinlich auch mit dem beobachteten intensiven Aufblitzen von Gamma-Strahlung (Gamma Ray Bursts). Insbesondere hat sich gezeigt, dass die Jets der Mikro-Quasare wahrscheinlich als kleinskalige Version der Jets der AGN anzusehen sind. Neben den Beobachtungen haben vor allem auch theoretische {\"U}berlegungen gezeigt, dass Magnetfelder bei der Jetentstehung, -beschleunigung und -kollimation eine wichtige Rolle spielen. Weiterhin scheinen Jets systematisch verkn{\"u}pft zu sein mit dem Vorhandensein einer Akkretionsscheibe um das zentrale Objekt. Insbesondere wenn ein schwarzes Loch den Zentralk{\"o}rper darstellt, ist die umgebende Akkretionsscheibe der einzig m{\"o}gliche Ort um Magnetfeld erzeugen zu k{\"o}nnen. Wir sind speziell interessiert am Entstehungsprozess hoch relativistischer Jets wie sie bei Mikro-Quasaren und AGN beobachtet werden. Insbesondere untersuchen wir die Region, in der der Jet kollimiert, eine Region, deren r{\"a}umliche Ausdehnung extrem klein ist selbst im Vergleich zur Aufl{\"o}sung der Radioteleskope. Dies ist ein Grund, wieso zum heutigen Zeitpunkt f{\"u}r die meisten Quellen die theoretische Modellierung die einzige M{\"o}glichkeit darstellt, um Information {\"u}ber die physikalischen Prozesse in der innersten Region der Jetentstehung zu erhalten. Uns ist es zum ersten Mal gelungen, die globale zwei-dimensionale Magnetfeldstruktur station{\"a}rer, axialsymmetrischer, relativistischer und stark magnetisierter (kr{\"a}fte-freier) Jets zu berechnen, die zum einen asymptotisch in einen zylindrischen Jet kollimieren, zum anderen aber in einer differential rotierenden Akkretionsscheibe verankert sind. Damit erlaubt dieser Ansatz eine physikalische Verkn\&\#168;upfung zwischen Akkretionsscheibe und dem asymptotischen Jet. Nimmt man also an, dass die Fußpunkte der Magnetfeldlinien mit Keplergeschwindigkeit rotieren, so kann man eine direkte Skalierung der Jetmagnetosphere mit der Gr{\"o}ße des Zentralobjektes erhalten. Unsere Resultate zeigen eine gute {\"U}bereinstimmung zwischen unserem Modell und Beobachtungen des Jets von M87. F{\"u}r das Beispiel eines relativistischen Mikroquasarjets haben wir die R{\"o}ntgenemission im Bereich von 0.2-10.1 keV berechnet. Daf{\"u}r haben wir in der Literatur aus den relativistischen magnetohydrodynamischen Gleichungen berechnete Jetgr{\"o}ßen (Dichte-, Geschwindigkeits-, und Temperaturprofil) verwendet und das Spektrum f{\"u}r jeden Punkt entlang der Jetstr{\"o}mung abgeleitet. Das theoretische thermische R{\"o}ntgenspektrum des innersten, heißen Teils des Jets erhalten wir zusammengesetzt aus den spektralen Anteilen der einzelnen Volumenelemente entlang des Jets. Um relativistische Effekte wie Dopplerverschiebung und -verst{\"a}rkung (boosting) aufgrund der Jetbewegung zu untersuchen, haben wir f{\"u}r verschiedene Inklinationswinkel des Jets zur Sichtlinie berechnet, wie die erhaltenen Spektren davon beeinflusst werden. Unsere Spektren zeigen deutlich die hochionisierten Eisen-Emissionslinien, die in den galaktischen Mikroquasaren GRS 1915+105 und XTE J1748-288 andeutungsweise beobachtet wurden. Eine Dopplerverschiebung dieser Linien ist in unseren Spektren deutlichzu sehen. Da die innerste, R{\"o}ntgenstrahlung emittierende Region des magnetohydrodynamischen Jets allerdings noch unkollimiert ist, spielt Dopplerboosting in unseren Spektren, abh{\"a}ngig vom Sichtwinkel, keine große Rolle. Mit unseren Resultaten konnte zum ersten Mal ein R{\"o}ntgenspektrum gewonnen werden, das auf der numerischen L{\"o}sung eines magnetohydrodynamischen Jets beruht.}, language = {en} }