@phdthesis{Antonelli2021,
  author    = {Antonelli, Andrea},
  title     = {Accurate waveform models for gravitational-wave astrophysics: synergetic approaches from analytical relativity},
  doi       = {10.25932/publishup-57667},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-576671},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XII, 259, LXXV},
  year      = {2021},
  abstract  = {Gravitational-wave (GW) astrophysics is a field in full blossom. Since the landmark detection of GWs from a binary black hole on September 14th 2015, fifty-two compact-object binaries have been reported by the LIGO-Virgo collaboration. Such events carry astrophysical and cosmological information ranging from an understanding of how black holes and neutron stars are formed, what neutron stars are composed of, how the Universe expands, and allow testing general relativity in the highly-dynamical strong-field regime. It is the goal of GW astrophysics to extract such information as accurately as possible. Yet, this is only possible if the tools and technology used to detect and analyze GWs are advanced enough. A key aspect of GW searches are waveform models, which encapsulate our best predictions for the gravitational radiation under a certain set of parameters, and that need to be cross-correlated with data to extract GW signals. Waveforms must be very accurate to avoid missing important physics in the data, which might be the key to answer the fundamental questions of GW astrophysics. The continuous improvements of the current LIGO-Virgo detectors, the development of next-generation ground-based detectors such as the Einstein Telescope or the Cosmic Explorer, as well as the development of the Laser Interferometer Space Antenna (LISA), demand accurate waveform models. While available models are enough to capture the low spins, comparable-mass binaries routinely detected in LIGO-Virgo searches, those for sources from both current and next-generation ground-based and spaceborne detectors must be accurate enough to detect binaries with large spins and asymmetry in the masses. Moreover, the thousands of sources that we expect to detect with future detectors demand accurate waveforms to mitigate biases in the estimation of signals' parameters due to the presence of a foreground of many sources that overlap in the frequency band. This is recognized as one of the biggest challenges for the analysis of future-detectors' data, since biases might hinder the extraction of important astrophysical and cosmological information from future detectors' data. In the first part of this thesis, we discuss how to improve waveform models for binaries with high spins and asymmetry in the masses. In the second, we present the first generic metrics that have been proposed to predict biases in the presence of a foreground of many overlapping signals in GW data. For the first task, we will focus on several classes of analytical techniques. Current models for LIGO and Virgo studies are based on the post-Newtonian (PN, weak-field, small velocities) approximation that is most natural for the bound orbits that are routinely detected in GW searches. However, two other approximations have risen in prominence, the post-Minkowskian (PM, weak- field only) approximation natural for unbound (scattering) orbits and the small-mass-ratio (SMR) approximation typical of binaries in which the mass of one body is much bigger than the other. These are most appropriate to binaries with high asymmetry in the masses that challenge current waveform models. Moreover, they allow one to "cover" regions of the parameter space of coalescing binaries, thereby improving the interpolation (and faithfulness) of waveform models. The analytical approximations to the relativistic two-body problem can synergically be included within the effective-one-body (EOB) formalism, in which the two-body information from each approximation can be recast into an effective problem of a mass orbiting a deformed Schwarzschild (or Kerr) black hole. The hope is that the resultant models can cover both the low-spin comparable-mass binaries that are routinely detected, and the ones that challenge current models. The first part of this thesis is dedicated to a study about how to best incorporate information from the PN, PM, SMR and EOB approaches in a synergistic way. We also discuss how accurate the resulting waveforms are, as compared against numerical-relativity (NR) simulations. We begin by comparing PM models, whether alone or recast in the EOB framework, against PN models and NR simulations. We will show that PM information has the potential to improve currently-employed models for LIGO and Virgo, especially if recast within the EOB formalism. This is very important, as the PM approximation comes with a host of new computational techniques from particle physics to exploit. Then, we show how a combination of PM and SMR approximations can be employed to access previously-unknown PN orders, deriving the third subleading PN dynamics for spin-orbit and (aligned) spin1-spin2 couplings. Such new results can then be included in the EOB models currently used in GW searches and parameter estimation studies, thereby improving them when the binaries have high spins. Finally, we build an EOB model for quasi-circular nonspinning binaries based on the SMR approximation (rather than the PN one as usually done). We show how this is done in detail without incurring in the divergences that had affected previous attempts, and compare the resultant model against NR simulations. We find that the SMR approximation is an excellent approximation for all (quasi-circular nonspinning) binaries, including both the equal-mass binaries that are routinely detected in GW searches and the ones with highly asymmetric masses. In particular, the SMR-based models compare much better than the PN models, suggesting that SMR-informed EOB models might be the key to model binaries in the future. In the second task of this thesis, we work within the linear-signal ap- proximation and describe generic metrics to predict inference biases on the parameters of a GW source of interest in the presence of confusion noise from unfitted foregrounds and from residuals of other signals that have been incorrectly fitted out. We illustrate the formalism with simple (yet realistic) LISA sources, and demonstrate its validity against Monte-Carlo simulations. The metrics we describe pave the way for more realistic studies to quantify the biases with future ground-based and spaceborne detectors.},
  language  = {en}
}
@phdthesis{Keles2021,
  author    = {Keles, Engin},
  title     = {Atmospheric properties and dynamics of gaseous exoplanets inferred from high-resolution alkali line transmission spectroscopy},
  school      = {Universit{\"a}t Potsdam},
  year      = {2021},
  abstract  = {The characterization of exoplanets applying high-resolution transmission spectroscopy ini- tiated a new era making it possible to trace atmospheric signature at high altitudes in exoplanet atmospheres and to determine atmospheric properties which enrich our under- standing of the formation and evolution of the solar system. In contrast to what is observed in our solar system, where gaseous planets orbit at wide orbits, Jupiter type exoplanets were detected in foreign stellar systems surrounding their host stars within few days, in close orbits, the so called hot- and ultra-hot Jupiters. The most well studied ones are HD209458b and HD189733b, which are the first exoplanets where absorption is detected in their atmospheres, namely from the alkali line sodium. For hot Jupiters, the resonant alkali lines are the atmospheric species with one of the strongest absorption signatures, due to their large absorption cross-section. However, al- though the alkali lines sodium and potassium were detected in low-resolution observations for various giant exoplanets, potassium was absent in different high-resolution investiga- tions in contrast to sodium. The reason for this is quite puzzling, since both alkalis have very similar physical and chemical properties (e.g. condensation and ionization proper- ties). Obtaining high-resolution transit observations of HD189733b and HD209458b, we were able to detect potassium on HD189733b (Manuscript 1), which was the first high-resolution detection of potassium on an exoplanet. The absence of potassium on HD209458b could be reasoned by depletion processes, such as condensation or photo-ionization or high-altitude clouds. In a further study (Manuscript II), we resolved the potassium line and compared this to a previously detected sodium absorption on this planet. The comparison showed, that the potassium lines are either tracing different altitudes and temperatures compared to the sodium lines, or are depleted so that the planetary Na/K- ratio is way larger than the stellar one. A comparison of the alkali lines with synthetic line profiles showed that the sodium lines were much broader than the potassium lines, probably being induced by winds. To investigate this, the effect of zonal streaming winds on the sodium lines on Jupiter-type planets is investigated in a further study (Manuscript III), showing that such winds can significantly broaden the Na- lines and that high-resolution observations can trace such winds with different properties. Furthermore, investigating the Na-line observations for different exoplanets, I showed that the Na-line broadening follows a trend with cooler planets showing stronger line broadening and so hinting on stronger winds, matching well into theoretical predictions. Each presented manuscript depends on the re- sults published within the previous manuscript, yielding a unitary study of the exoplanet HD189733b. The investigation of the potassium absorption required to account for different effects: The telluric lines removal and the effect of center-to-limb variation (see Manuscript I), the residual Rossiter-Mc-Laughlin effect (see Manuscript II) and the broadening of spectral lines on a translucent atmospheric ring by zonal jet streams (see Manuscript III). This thesis shows that high-resolution transmission spectroscopy is a powerful tool to probe sharp alkali line absorption on giant exoplanet atmospheres and to investigate on the properties and dynamics of hot Jupiter type atmospheres.},
  language  = {en}
}
@phdthesis{Zheng2021,
  author    = {Zheng, Chunming},
  title     = {Bursting and synchronization in noisy oscillatory systems},
  doi       = {10.25932/publishup-50019},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-500199},
  school      = {Universit{\"a}t Potsdam},
  pages     = {iv, 87},
  year      = {2021},
  abstract  = {Noise is ubiquitous in nature and usually results in rich dynamics in stochastic systems such as oscillatory systems, which exist in such various fields as physics, biology and complex networks. The correlation and synchronization of two or many oscillators are widely studied topics in recent years. In this thesis, we mainly investigate two problems, i.e., the stochastic bursting phenomenon in noisy excitable systems and synchronization in a three-dimensional Kuramoto model with noise. Stochastic bursting here refers to a sequence of coherent spike train, where each spike has random number of followers due to the combined effects of both time delay and noise. Synchronization, as a universal phenomenon in nonlinear dynamical systems, is well illustrated in the Kuramoto model, a prominent model in the description of collective motion. In the first part of this thesis, an idealized point process, valid if the characteristic timescales in the problem are well separated, is used to describe statistical properties such as the power spectral density and the interspike interval distribution. We show how the main parameters of the point process, the spontaneous excitation rate, and the probability to induce a spike during the delay action can be calculated from the solutions of a stationary and a forced Fokker-Planck equation. We extend it to the delay-coupled case and derive analytically the statistics of the spikes in each neuron, the pairwise correlations between any two neurons, and the spectrum of the total output from the network. In the second part, we investigate the three-dimensional noisy Kuramoto model, which can be used to describe the synchronization in a swarming model with helical trajectory. In the case without natural frequency, the Kuramoto model can be connected with the Vicsek model, which is widely studied in collective motion and swarming of active matter. We analyze the linear stability of the incoherent state and derive the critical coupling strength above which the incoherent state loses stability. In the limit of no natural frequency, an exact self-consistent equation of the mean field is derived and extended straightforward to any high-dimensional case.},
  language  = {en}
}
@phdthesis{Gengel2021,
  author    = {Gengel, Erik},
  title     = {Direct and inverse problems of network analysis},
  doi       = {10.25932/publishup-51236},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-512367},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VIII, 102},
  year      = {2021},
  abstract  = {Selfsustained oscillations are some of the most commonly observed phenomena in biological systems. They emanate from non-linear systems in a heterogeneous environment and can be described by the theory of dynamical systems. Part of this theory considers reduced models of the oscillator dynamics by means of amplitudes and a phase variable. Such variables are highly attractive for theoretical and experimental studies. Theoretically these variables correspond to an integrable linearization of the generally non-linear system. Experimentally, there exist well established approaches to extract phases from oscillator signals. Notably, one can define phase models also for networks of oscillators. One highly active field examines effects of non-local coupling among oscillators, which is thought to play a key role in networks with strong coupling. The dissertation introduces and expands the knowledge about high-order phase coupling in networks of oscillators. Mathematical calculations consider the Stuart-Landau oscillator. A novel phase estimation scheme for direct observations of an oscillator dynamics is introduced based on numerics. A numerical study of high-order phase coupling applies a Fourier fit for the Stuart-Landau and for the van-der-Pol oscillator. The numerical approach is finally tested on observation-based phase estimates of the Morris-Lecar neuron. A popular approach for the construction of phases from signals is based on phase demodulation by means of the Hilbert transform. Generally, observations of oscillations contain a small and generic variation of their amplitude. The work presents a way to quantify how much the variations of signal amplitude spoil a phase demodulation procedure. For the ideal case of phase modulated signals, amplitude modulations vanish. However, the Hilbert transform produces artificial variations of the reconstructed amplitude even in this case. The work proposes a novel procedure called Iterative Hilbert Transform Embedding to obtain an optimal demodulation of signals. The text presents numerous examples and tests of application for the method, covering multicomponent signals, observables of highly stable limit cycle oscillations and noisy phase dynamics. The numerical results are supported by a spectral theory of convergence for weak phase modulations.},
  language  = {en}
}
@phdthesis{Born2021,
  author    = {Born, Artur},
  title     = {Electronic structure, quasi-particle interaction and relaxation in 3d-elements from X-ray spectroscopy},
  school      = {Universit{\"a}t Potsdam},
  year      = {2021},
  language  = {en}
}
@phdthesis{Born2021,
  author    = {Born, Artur},
  title     = {Electronic structure, quasi-particle interaction and relaxation in 3d-elements from X-ray spectroscopy},
  school      = {Universit{\"a}t Potsdam},
  pages     = {123},
  year      = {2021},
  abstract  = {Any physical system can be described on the level of interacting particles, thus it is of fundamental importance to improve the scientific understanding of interacting many-body systems. This thesis experimentally addresses specific quasi-particle interactions, namely interactions be- tween electrons and between electrons and phonons. It describes the consequential effects of those processes on the electronic structure and the core-hole relaxation pathways in 3d metals. Despite the great amount of experimental and theoretical studies of these interactions and their impact on the behavior of solid-state matter, there are still open questions concerning the cor- responding physical, chemical and mechanical properties of solid-state matter. Especially, the study of 3d metals and their compounds is a great experimental challenge, since those exhibit a variety of spectral features originating from many-body effects such as multiplet splitting, shake up/off satellites, vibrationally excited states or more complex effects like superconductivity and ultrafast demagnetization. In X-ray spectroscopy, these effects often produce overlapping fea- tures, complicating the analysis and limiting the understanding. In this thesis, to overcome the limitations set by conventional X-ray spectroscopy, two different experimental approaches were successfully refined, namely Auger electron photoelectron coincidence spectroscopy (APECS) and temperature-dependent X-ray emission spectroscopy (tXES), which enabled the separation of different core-hole relaxation pathways and the isolation of the impact of specific many-body interactions in the experimental spectra. APECS was utilized at the new Coincidence electron spectroscopy for chemical analysis (Co- ESCA) station at BESSY II to study the core-hole decay and electron-correlation effects in single- crystal Ni, Cu and Co. The observation of photoelectrons in coincidence with Auger electrons allows for the separation of the initial and final state effects in the Auger electron spectra. The results show that a Cu LV V Auger spectrum can be represented by broadened atomic multiplets confirming the localized nature of the intermediate core-hole states. In contrast, the Co LV V Auger spectrum is band-like and can be represented by the self-convolution of the valence band. Ni behaves mixed, localized and itinerant. Thus, the Ni Auger spectrum can only be represented by a mixture of atomic multiplet peaks and the self-convoluted valence band. In the case of Ni, the LV V Auger electrons in coincidence with the 6 eV satellite photoelectrons were also stud- ied. Utilizing the core-hole clock method, the lifetime of the localized double-hole intermediate 2 p53d9 states of 1.8 fs could be determined. However, a fraction of these states delocalizes before the Auger decay contributing to the main peak. A similar delocalization was observed for the double-hole states produced by the L2L3M4,5 Coster-Kronig process. Additionally, the influence of surface oxidation on the Ni(111) 3p levels was studied with APECS. The Ni 3p PES spectrum is broad and featureless, due to overlapping many-body effects and gives little chance for exact analysis using conventional photoelectron spectroscopy. Utilizing APECS or precisely the final state selectivity of the method, the spectral width of the 3p levels could be narrowed and their positions and the spin-orbit splitting were determined. Moreover, due to the surface sensitivity of the method, the chemically shifted 3p photoelectron peaks originating from the oxidized surface and the bulk Ni were disentangled. For the study of the atomic electron-phonon spin-flip scattering in 3d metals as a spin-relaxation channel, the tXES method at the SolidFlexRIXS station was developed. The atomic spin-flip scat- tering was studied in single-crystal Ni, Cu, Co and in FeNi alloys, which show considerable dif- ferences in their behavior. The scattering rate in Ni increases with temperature, whereas the rate in Cu and Co remains constant within the measured temperature range up to 1000 K. In FeNi alloys, our results reveal that the spin-flip scattering is restricted by sublattice exchange energies J. The electron-phonon scattering driven spin-flips only appear in the case where the thermal energy ex- ceeds the exchange energy kT > J. This thresholding is an important microscopic process for the description of the sublattice dynamics in alloys, but as shown also relevant for elemental magnetic systems. Overall, the results strongly indicate that the spin-flip probability is correlated with the exchange energy, which might become an important parameter in the ultrafast demagnetization debate. Taken together, the applied experimental approaches allowed to study complex many-body effects in 3d metals. The results show that utilizing APECS enabled the distinction and clear assignment of otherwise overlapping features in AES or PES spectra of Ni, Cu, Co and NiO. This is of fundamental importance for the basic understanding of photoionization and core-hole decay processes but also for the chemical analysis in applied science. The measurement of the atomic electron-phonon spin-flip scattering rate utilizing tXES shows that the electron-phonon spin-flip scattering is a relevant atomic process for the macroscopic demagnetization process. Additionally, a temperature-dependent thresholding mechanism was discovered, which introduces an important dynamic factor into the electron-phonon spin-flip model.},
  language  = {en}
}
@phdthesis{Lepro2021,
  author    = {Lepro, Valentino},
  title     = {Experimental and theoretical study on amoeboid cell-cargo active motion},
  doi       = {10.25932/publishup-49089},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-490890},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xx, 114},
  year      = {2021},
  abstract  = {As society paves its way towards device miniaturization and precision medicine, micro-scale actuation and guided transport become increasingly prominent research fields, with high potential impact in both technological and clinical contexts. In order to accomplish directed motion of micron-sized objects, as biosensors and drug-releasing microparticles, towards specific target sites, a promising strategy is the use of living cells as smart biochemically-powered carriers, building the so-called bio-hybrid systems. Inspired by leukocytes, native cells of living organisms efficiently migrating to critical targets as tumor tissue, an emerging concept is to exploit the amoeboid crawling motility of such cells as mean of transport for drug delivery applications. In the research work described in this thesis, I synergistically applied experimental, computational and theoretical modeling approaches to investigate the behaviour and transport mechanism of a novel kind of bio-hybrid system for active transport at the micro-scale, referred to as cellular truck. This system consists of an amoeboid crawling cell, the carrier, attached to a microparticle, the cargo, which may ideally be drug-loaded for specific therapeutic treatments. For the purposes of experimental investigation, I employed the amoeba Dictyostelium discoideum as crawling cellular carrier, being a renowned model organism for leukocyte migration and, in general, for eukaryotic cell motility. The performed experiments revealed a complex recurrent cell-cargo relative motion, together with an intermittent motility of the cellular truck as a whole. The evidence suggests the presence of cargoes on amoeboid cells to act as mechanical stimulus leading cell polarization, thus promoting cell motility and giving rise to the observed intermittent dynamics of the truck. Particularly, bursts in cytoskeletal polarity along the cell-cargo axis have been found to occur in time with a rate dependent on cargo geometrical features, as particle diameter. Overall, the collected experimental evidence pointed out a pivotal role of cell-cargo interactions in the emergent cellular truck motion dynamics. Especially, they can determine the transport capabilities of amoeboid cells, as the cargo size significantly impacts the cytoskeletal activity and repolarization dynamics along the cell-cargo axis, the latter responsible for truck displacement and reorientation. Furthermore, I developed a modeling framework, built upon the experimental evidence on cellular truck behaviour, that connects the relative dynamics and interactions arising at the truck scale with the actual particle transport dynamics. In fact, numerical simulations of the proposed model successfully reproduced the phenomenology of the cell-cargo system, while enabling the prediction of the transport properties of cellular trucks over larger spatial and temporal scales. The theoretical analysis provided a deeper understanding of the role of cell-cargo interaction on mass transport, unveiling in particular how the long-time transport efficiency is governed by the interplay between the persistence time of cell polarity and time scales of the relative dynamics stemming from cell-cargo interaction. Interestingly, the model predicts the existence of an optimal cargo size, enhancing the diffusivity of cellular trucks; this is in line with previous independent experimental data, which appeared rather counterintuitive and had no explanation prior to this study. In conclusion, my research work shed light on the importance of cargo-carrier interactions in the context of crawling cell-mediated particle transport, and provides a prototypical, multifaceted framework for the analysis and modelling of such complex bio-hybrid systems and their perspective optimization.},
  language  = {en}
}
@phdthesis{Petsiuk2021,
  author    = {Petsiuk, Andrei},
  title     = {Investigation of charge carrier transport in metal halide perovskites by THz Spectroscopy},
  doi       = {10.25932/publishup-51544},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-515441},
  school      = {Universit{\"a}t Potsdam},
  pages     = {118},
  year      = {2021},
  abstract  = {Halide perovskites are a class of novel photovoltaic materials that have recently attracted much attention in the photovoltaics research community due to their highly promising optoelectronic properties, including large absorption coefficients and long carrier lifetimes. The charge carrier mobility of halide perovskites is investigated in this thesis by THz spectroscopy, which is a contact-free technique that yields the intra-grain sum mobility of electrons and holes in a thin film. The polycrystalline halide perovskite thin films, provided from Potsdam University, show moderate mobilities in the range from 21.5 to 33.5 cm2V-1s-1. It is shown in this work that the room temperature mobility is limited by charge carrier scattering at polar optical phonons. The mobility at low temperature is likely to be limited by scattering at charged and neutral impurities at impurity concentration N=1017-1018 cm-3. Furthermore, it is shown that exciton formation may decrease the mobility at low temperatures. Scattering at acoustic phonons can be neglected at both low and room temperatures. The analysis of mobility spectra over a broad range of temperatures for perovskites with various cation compounds shows that cations have a minor impact on charge carrier mobility. The low-dimensional thin films of quasi-2D perovskite with different numbers of [PbI6]4-sheets (n=2-4) alternating with long organic spacer molecules were provided by S. Zhang from Potsdam University. They exhibit mobilities in the range from 3.7 to 8 cm2V-1s-1. A clear decrease of mobility is observed with decrease in number of metal-halide sheets n, which likely arises from charge carrier confinement within metal-halide layers. Modelling the measured THz mobility with the modified Drude-Smith model yields localization length from 0.9 to 3.7 nm, which agrees well on the thicknesses of the metal-halide layers. Additionally, the mobilities are found to be dependent on the orientation of the layers. The charge carrier dynamics is also dependent on the number of metal-halide sheets n. For the thin films with n =3-4 the dynamics is similar to the 3D MHPs. However, the thin film with n = 2 shows clearly different dynamics, where the signs of exciton formation are observed within 390 fs timeframe after photoexcitation. Also, the charge carrier dynamics of CsPbI3 perovskite nanocrystals was investigated, in particular the effect of post treatments on the charge carrier transport.},
  language  = {en}
}
@phdthesis{Reppert2021,
  author    = {Reppert, Alexander von},
  title     = {Magnetic strain contributions in laser-excited metals studied by time-resolved X-ray diffraction},
  doi       = {10.25932/publishup-53558},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-535582},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XV, 311},
  year      = {2021},
  abstract  = {In this work I explore the impact of magnetic order on the laser-induced ultrafast strain response of metals. Few experiments with femto- or picosecond time-resolution have so far investigated magnetic stresses. This is contrasted by the industrial usage of magnetic invar materials or magnetostrictive transducers for ultrasound generation, which already utilize magnetostrictive stresses in the low frequency regime. In the reported experiments I investigate how the energy deposition by the absorption of femtosecond laser pulses in thin metal films leads to an ultrafast stress generation. I utilize that this stress drives an expansion that emits nanoscopic strain pulses, so called hypersound, into adjacent layers. Both the expansion and the strain pulses change the average inter-atomic distance in the sample, which can be tracked with sub-picosecond time resolution using an X-ray diffraction setup at a laser-driven Plasma X-ray source. Ultrafast X-ray diffraction can also be applied to buried layers within heterostructures that cannot be accessed by optical methods, which exhibit a limited penetration into metals. The reconstruction of the initial energy transfer processes from the shape of the strain pulse in buried detection layers represents a contribution of this work to the field of picosecond ultrasonics. A central point for the analysis of the experiments is the direct link between the deposited energy density in the nano-structures and the resulting stress on the crystal lattice. The underlying thermodynamical concept of a Gr{\"u}neisen parameter provides the theoretical framework for my work. I demonstrate how the Gr{\"u}neisen principle can be used for the interpretation of the strain response on ultrafast timescales in various materials and that it can be extended to describe magnetic stresses. The class of heavy rare-earth elements exhibits especially large magnetostriction effects, which can even lead to an unconventional contraction of the laser-excited transducer material. Such a dominant contribution of the magnetic stress to the motion of atoms has not been demonstrated previously. The observed rise time of the magnetic stress contribution in Dysprosium is identical to the decrease in the helical spin-order, that has been found previously using time-resolved resonant X-ray diffraction. This indicates that the strength of the magnetic stress can be used as a proxy of the underlying magnetic order. Such magnetostriction measurements are applicable even in case of antiparallel or non-collinear alignment of the magnetic moments and a vanishing magnetization. The strain response of metal films is usually determined by the pressure of electrons and lattice vibrations. I have developed a versatile two-pulse excitation routine that can be used to extract the magnetic contribution to the strain response even if systematic measurements above and below the magnetic ordering temperature are not feasible. A first laser pulse leads to a partial ultrafast demagnetization so that the amplitude and shape of the strain response triggered by the second pulse depends on the remaining magnetic order. With this method I could identify a strongly anisotropic magnetic stress contribution in the magnetic data storage material iron-platinum and identify the recovery of the magnetic order by the variation of the pulse-to-pulse delay. The stark contrast of the expansion of iron-platinum nanograins and thin films shows that the different constraints for the in-plane expansion have a strong influence on the out-of-plane expansion, due to the Poisson effect. I show how such transverse strain contributions need to be accounted for when interpreting the ultrafast out-of-plane strain response using thermal expansion coefficients obtained in near equilibrium conditions. This work contributes an investigation of magnetostriction on ultrafast timescales to the literature of magnetic effects in materials. It develops a method to extract spatial and temporal varying stress contributions based on a model for the amplitude and shape of the emitted strain pulses. Energy transfer processes result in a change of the stress profile with respect to the initial absorption of the laser pulses. One interesting example occurs in nanoscopic gold-nickel heterostructures, where excited electrons rapidly transport energy into a distant nickel layer, that takes up much more energy and expands faster and stronger than the laser-excited gold capping layer. Magnetic excitations in rare earth materials represent a large energy reservoir that delays the energy transfer into adjacent layers. Such magneto-caloric effects are known in thermodynamics but not extensively covered on ultrafast timescales. The combination of ultrafast X-ray diffraction and time-resolved techniques with direct access to the magnetization has a large potential to uncover and quantify such energy transfer processes.},
  language  = {en}
}
@phdthesis{Brugger2021,
  author    = {Brugger, Julia},
  title     = {Modeling changes in climate during past mass extinctions},
  doi       = {10.25932/publishup-53246},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-532468},
  school      = {Universit{\"a}t Potsdam},
  pages     = {V, 217},
  year      = {2021},
  abstract  = {The evolution of life on Earth has been driven by disturbances of different types and magnitudes over the 4.6 million years of Earth's history (Raup, 1994, Alroy, 2008). One example for such disturbances are mass extinctions which are characterized by an exceptional increase in the extinction rate affecting a great number of taxa in a short interval of geologic time (Sepkoski, 1986). During the 541 million years of the Phanerozoic, life on Earth suffered five exceptionally severe mass extinctions named the "Big Five Extinctions". Many mass extinctions are linked to changes in climate (Feulner, 2009). Hence, the study of past mass extinctions is not only intriguing, but can also provide insights into the complex nature of the Earth system. This thesis aims at deepening our understanding of the triggers of mass extinctions and how they affected life. To accomplish this, I investigate changes in climate during two of the Big Five extinctions using a coupled climate model. During the Devonian (419.2-358.9 million years ago) the first vascular plants and vertebrates evolved on land while extinction events occurred in the ocean (Algeo et al., 1995). The causes of these formative changes, their interactions and their links to changes in climate are still poorly understood. Therefore, we explore the sensitivity of the Devonian climate to various boundary conditions using an intermediate-complexity climate model (Brugger et al., 2019). In contrast to Le Hir et al. (2011), we find only a minor biogeophysical effect of changes in vegetation cover due to unrealistically high soil albedo values used in the earlier study. In addition, our results cannot support the strong influence of orbital parameters on the Devonian climate, as simulated with a climate model with a strongly simplified ocean model (De Vleeschouwer et al., 2013, 2014, 2017). We can only reproduce the changes in Devonian climate suggested by proxy data by decreasing atmospheric CO2. Still, finding agreement between the evolution of sea surface temperatures reconstructed from proxy data (Joachimski et al., 2009) and our simulations remains challenging and suggests a lower δ18O ratio of Devonian seawater. Furthermore, our study of the sensitivity of the Devonian climate reveals a prevailing mode of climate variability on a timescale of decades to centuries. The quasi-periodic ocean temperature fluctuations are linked to a physical mechanism of changing sea-ice cover, ocean convection and overturning in high northern latitudes. In the second study of this thesis (Dahl et al., under review) a new reconstruction of atmospheric CO2 for the Devonian, which is based on CO2-sensitive carbon isotope fractionation in the earliest vascular plant fossils, suggests a much earlier drop of atmo- spheric CO2 concentration than previously reconstructed, followed by nearly constant CO2 concentrations during the Middle and Late Devonian. Our simulations for the Early Devonian with identical boundary conditions as in our Devonian sensitivity study (Brugger et al., 2019), but with a low atmospheric CO2 concentration of 500 ppm, show no direct conflict with available proxy and paleobotanical data and confirm that under the simulated climatic conditions carbon isotope fractionation represents a robust proxy for atmospheric CO2. To explain the earlier CO2 drop we suggest that early forms of vascular land plants have already strongly influenced weathering. This new perspective on the Devonian questions previous ideas about the climatic conditions and earlier explanations for the Devonian mass extinctions. The second mass extinction investigated in this thesis is the end-Cretaceous mass extinction (66 million years ago) which differs from the Devonian mass extinctions in terms of the processes involved and the timescale on which the extinctions occurred. In the two studies presented here (Brugger et al., 2017, 2021), we model the climatic effects of the Chicxulub impact, one of the proposed causes of the end-Cretaceous extinction, for the first millennium after the impact. The light-dimming effect of stratospheric sulfate aerosols causes severe cooling, with a decrease of global annual mean surface air temperature of at least 26◦C and a recovery to pre-impact temperatures after more than 30 years. The sudden surface cooling of the ocean induces deep convection which brings nutrients from the deep ocean via upwelling to the surface ocean. Using an ocean biogeochemistry model we explore the combined effect of ocean mixing and iron-rich dust originating from the impactor on the marine biosphere. As soon as light levels have recovered, we find a short, but prominent peak in marine net primary productivity. This newly discovered mechanism could result in toxic effects for marine near-surface ecosystems. Comparison of our model results to proxy data (Vellekoop et al., 2014, 2016, Hull et al., 2020) suggests that carbon release from the terrestrial biosphere is required in addition to the carbon dioxide which can be attributed to the target material. Surface ocean acidification caused by the addition of carbon dioxide and sulfur is only moderate. Taken together, the results indicate a significant contribution of the Chicxulub impact to the end-Cretaceous mass extinction by triggering multiple stressors for the Earth system. Although the sixth extinction we face today is characterized by human intervention in nature, this thesis shows that we can gain many insights into future extinctions from studying past mass extinctions, such as the importance of the rate of change (Rothman, 2017), the interplay of multiple stressors (Gunderson et al., 2016), and changes in the carbon cycle (Rothman, 2017, Tierney et al., 2020).},
  language  = {en}
}
@phdthesis{Diercke2021,
  author    = {Diercke, Andrea},
  title     = {Physical environment of large-scale high-latitude and polar crown filaments},
  doi       = {10.25932/publishup-51130},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-511301},
  school      = {Universit{\"a}t Potsdam},
  pages     = {133},
  year      = {2021},
  abstract  = {Filaments are omnipresent features in the solar chromosphere, one of the atmospheric layers of the Sun, which is located above the photosphere, the visible surface of the Sun. They are clouds of plasma reaching from the photosphere to the chromosphere, and even to the outer-most atmospheric layer, the corona. They are stabalized by the magnetic field. If the magnetic field is disturbed, filaments can erupt as coronal mass ejections (CME), releasing plasma into space, which can also hit the Earth. A special type of filaments are polar crown filaments, which form at the interface of the unipolar field of the poles and flux of opposite magnetic polarity, which was transported towards the poles. This flux transport is related to the global dynamo of the Sun and can therefore be analyzed indirectly with polar crown filaments. The main objective of this thesis is to better understand the physical properties and environment of high-latitude and polar crown filaments, which can be approached from two perspectives: (1) analyzing the large-scale properties of high-latitude and polar crown filaments with full-disk Hα observations from the Chromospheric Telescope (ChroTel) and (2) determining the relation of polar crown and high-latitude filaments from the chromosphere to the lower-lying photosphere with high-spatial resolution observations of the Vacuum Tower Telescope (VTT), which reveal the smallest details. The Chromospheric Telescope (ChroTel) is a small 10-cm robotic telescope at Observatorio del Teide on Tenerife (Spain), which observes the entire Sun in Hα, Ca IIK, and He I 10830 {\AA}. We present a new calibration method that includes limb-darkening correction, removal of non-uniform filter transmission, and determination of He I Doppler velocities. Chromospheric full-disk filtergrams are often obtained with Lyot filters, which may display non-uniform transmission causing large-scale intensity variations across the solar disk. Removal of a 2D symmetric limb-darkening function from full-disk images results in a flat background. However, transmission artifacts remain and are even more distinct in these contrast-enhanced images. Zernike polynomials are uniquely appropriate to fit these large-scale intensity variations of the background. The Zernike coefficients show a distinct temporal evolution for ChroTel data, which is likely related to the telescope's alt-azimuth mount that introduces image rotation. In addition, applying this calibration to sets of seven filtergrams that cover the He I triplet facilitates determining chromospheric Doppler velocities. To validate the method, we use three datasets with varying levels of solar activity. The Doppler velocities are benchmarked with respect to co-temporal high-resolution spectroscopic data of the GREGOR Infrared Spectrograph (GRIS). Furthermore, this technique can be applied to ChroTel Hα and Ca IIK data. The calibration method for ChroTel filtergrams can be easily adapted to other full-disk data exhibiting unwanted large-scale variations. The spectral region of the He I triplet is a primary choice for high-resolution near-infrared spectropolarimetry. Here, the improved calibration of ChroTel data will provide valuable context data. Polar crown filaments form above the polarity inversion line between the old magnetic flux of the previous cycle and the new magnetic flux of the current cycle. Studying their appearance and their properties can lead to a better understanding of the solar cycle. We use full-disk data of the ChroTel at Observatorio del Teide, Tenerife, Spain, which were taken in three different chromospheric absorption lines (Hα 6563 {\AA}, Ca IIK 3933 {\AA}, and He I 10830 {\AA}), and we create synoptic maps. In addition, the spectroscopic He I data allow us to compute Doppler velocities and to create synoptic Doppler maps. ChroTel data cover the rising and decaying phase of Solar Cycle 24 on about 1000 days between 2012 and 2018. Based on these data, we automatically extract polar crown filaments with image-processing tools and study their properties. We compare contrast maps of polar crown filaments with those of quiet-Sun filaments. Furthermore, we present a super-synoptic map summarizing the entire ChroTel database. In summary, we provide statistical properties, i.e. number and location of filaments, area, and tilt angle for both the maximum and declining phase of Solar Cycle 24. This demonstrates that ChroTel provides a promising dataset to study the solar cycle. The cyclic behavior of polar crown filaments can be monitored by regular full-disk Hα observations. ChroTel provides such regular observations of the Sun in three chromospheric wavelengths. To analyze the cyclic behavior and the statistical properties of polar crown filaments, we have to extract the filaments from the images. Manual extraction is tedious, and extraction with morphological image processing tools produces a large number of false positive detections and the manual extraction of these takes too much time. Automatic object detection and extraction in a reliable manner allows us to process more data in a shorter time. We will present an overview of the ChroTel database and a proof of concept of a machine learning application, which allows us a unified extraction of, for example, filaments from ChroTel data. The chromospheric Hα spectral line dominates the spectrum of the Sun and other stars. In the stellar regime, this spectral line is already used as a powerful tracer of magnetic activity. For the Sun, other tracers are typically used to monitor solar activity. Nonetheless, the Sun is observed constantly in Hα with globally distributed ground-based full-disk imagers. The aim of this study is to introduce Hα as a tracer of solar activity and compare it to other established indicators. We discuss the newly created imaging Hα excess in the perspective of possible application for modelling of stellar atmospheres. In particular, we try to determine how constant is the mean intensity of the Hα excess and number density of low-activity regions between solar maximum and minimum. Furthermore, we investigate whether the active region coverage fraction or the changing emission strength in the active regions dominates time variability in solar Hα observations. We use ChroTel observations of full-disk Hα filtergrams and morphological image processing techniques to extract the positive and negative imaging Hα excess, for bright features (plage regions) and dark absorption features (filaments and sunspots), respectively. We describe the evolution of the Hα excess during Solar Cycle 24 and compare it to other well established tracers: the relative sunspot number, the F10.7 cm radio flux, and the Mg II index. Moreover, we discuss possible applications of the Hα excess for stellar activity diagnostics and the contamination of exoplanet transmission spectra. The positive and negative Hα excess follow the behavior of the solar activity over the course of the cycle. Thereby, positive Hα excess is closely correlated to the chromospheric Mg II index. On the other hand, the negative Hα excess, created from dark features like filaments and sunspots, is introduced as a tracer of solar activity for the first time. We investigated the mean intensity distribution for active regions for solar minimum and maximum and found that the shape of both distributions is very similar but with different amplitudes. This might be related with the relatively stable coronal temperature component during the solar cycle. Furthermore, we found that the coverage fraction of Hα excess and the Hα excess of bright features are strongly correlated, which will influence modelling of stellar and exoplanet atmospheres. High-resolution observations of polar crown and high-latitude filaments are scarce. We present a unique sample of such filaments observed in high-resolution Hα narrow-band filtergrams and broad-band images, which were obtained with a new fast camera system at the VTT. ChroTel provided full-disk context observations in Hα, Ca IIK, and He I 10830 {\AA}. The Helioseismic and Magnetic Imager (HMI) and the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) provided line-of-sight magnetograms and ultraviolet (UV) 1700 {\AA} filtergrams, respectively. We study filigree in the vicinity of polar crown and high-latitude filaments and relate their locations to magnetic concentrations at the filaments' footpoints. Bright points are a well studied phenomenon in the photosphere at low latitudes, but they were not yet studied in the quiet network close to the poles. We examine size, area, and eccentricity of bright points and find that their morphology is very similar to their counterparts at lower latitudes, but their sizes and areas are larger. Bright points at the footpoints of polar crown filaments are preferentially located at stronger magnetic flux concentrations, which are related to bright regions at the border of supergranules as observed in UV filtergrams. Examining the evolution of bright points on three consecutive days reveals that their amount increases while the filament decays, which indicates they impact the equilibrium of the cool plasma contained in filaments.},
  language  = {en}
}
@phdthesis{Kraemer2021,
  author    = {Kr{\"a}mer, Kai Hauke},
  title     = {Towards a robust framework for recurrence analysis},
  doi       = {10.25932/publishup-53874},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-538743},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xlii, 217},
  year      = {2021},
  abstract  = {In our daily life, recurrence plays an important role on many spatial and temporal scales and in different contexts. It is the foundation of learning, be it in an evolutionary or in a neural context. It therefore seems natural that recurrence is also a fundamental concept in theoretical dynamical systems science. The way in which states of a system recur or develop in a similar way from similar initial states makes it possible to infer information about the underlying dynamics of the system. The mathematical space in which we define the state of a system (state space) is often high dimensional, especially in complex systems that can also exhibit chaotic dynamics. The recurrence plot (RP) enables us to visualize the recurrences of any high-dimensional systems in a two-dimensional, binary representation. Certain patterns in RPs can be related to physical properties of the underlying system, making the qualitative and quantitative analysis of RPs an integral part of nonlinear systems science. The presented work has a methodological focus and further develops recurrence analysis (RA) by addressing current research questions related to an increasing amount of available data and advances in machine learning techniques. By automatizing a central step in RA, namely the reconstruction of the state space from measured experimental time series, and by investigating the impact of important free parameters this thesis aims to make RA more accessible to researchers outside of physics. The first part of this dissertation is concerned with the reconstruction of the state space from time series. To this end, a novel idea is proposed which automates the reconstruction problem in the sense that there is no need to preprocesse the data or estimate parameters a priori. The key idea is that the goodness of a reconstruction can be evaluated by a suitable objective function and that this function is minimized in the embedding process. In addition, the new method can process multivariate time series input data. This is particularly important because multi-channel sensor-based observations are ubiquitous in many research areas and continue to increase. Building on this, the described minimization problem of the objective function is then processed using a machine learning approach. In the second part technical and methodological aspects of RA are discussed. First, we mathematically justify the idea of setting the most influential free parameter in RA, the recurrence threshold ε, in relation to the distribution of all pairwise distances in the data. This is especially important when comparing different RPs and their quantification statistics and is fundamental to any comparative study. Second, some aspects of recurrence quantification analysis (RQA) are examined. As correction schemes for biased RQA statistics, which are based on diagonal lines, we propose a simple method for dealing with border effects of an RP in RQA and a skeletonization algorithm for RPs. This results in less biased (diagonal line based) RQA statistics for flow-like data. Third, a novel type of RQA characteristic is developed, which can be viewed as a generalized non-linear powerspectrum of high dimensional systems. The spike powerspectrum transforms a spike-train like signal into its frequency domain. When transforming the diagonal line-dependent recurrence rate (τ-RR) of a RP in this way, characteristic periods, which can be seen in the state space representation of the system can be unraveled. This is not the case, when Fourier transforming τ-RR. Finally, RA and RQA are applied to climate science in the third part and neuroscience in the fourth part. To the best of our knowledge, this is the first time RPs and RQA have been used to analyze lake sediment data in a paleoclimate context. Therefore, we first elaborate on the basic formalism and the interpretation of visually visible patterns in RPs in relation to the underlying proxy data. We show that these patterns can be used to classify certain types of variability and transitions in the Potassium record from six short (< 17m) sediment cores collected during the Chew Bahir Drilling Project. Building on this, the long core (∼ m composite) from the same site is analyzed and two types of variability and transitions are identified and compared with ODP Site  wetness index from the eastern Mediterranean. Type  variability likely reflects the influence of precessional forcing in the lower latitudes at times of maximum values of the long eccentricity cycle ( kyr) of the earth's orbit around the sun, with a tendency towards extreme events. Type  variability appears to be related to the minimum values of this cycle and corresponds to fairly rapid transitions between relatively dry and relatively wet conditions. In contrast, RQA has been applied in the neuroscientific context for almost two decades. In the final part, RQA statistics are used to quantify the complexity in a specific frequency band of multivariate EEG (electroencephalography) data. By analyzing experimental data, it can be shown that the complexity of the signal measured in this way across the sensorimotor cortex decreases as motor tasks are performed. The results are consistent with and comple- ment the well known concepts of motor-related brain processes. We assume that the thus discovered features of neuronal dynamics in the sensorimotor cortex together with the robust RQA methods for identifying and classifying these contribute to the non-invasive EEG-based development of brain-computer interfaces (BCI) for motor control and rehabilitation. The present work is an important step towards a robust analysis of complex systems based on recurrence.},
  language  = {en}
}
@phdthesis{Canil2021,
  author    = {Canil, Laura},
  title     = {Tuning Interfacial Properties in Perovskite Solar Cells through Defined Molecular Assemblies},
  doi       = {10.25932/publishup-54633},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-546333},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vii, 157},
  year      = {2021},
  abstract  = {In the frame of a world fighting a dramatic global warming caused by human-related activities, research towards the development of renewable energies plays a crucial role. Solar energy is one of the most important clean energy sources and its role in the satisfaction of the global energy demand is set to increase. In this context, a particular class of materials captured the attention of the scientific community for its attractive properties: halide perovskites. Devices with perovskite as light-absorber saw an impressive development within the last decade, reaching nowadays efficiencies comparable to mature photovoltaic technologies like silicon solar cells. Yet, there are still several roadblocks to overcome before a wide-spread commercialization of this kind of devices is enabled. One of the critical points lies at the interfaces: perovskite solar cells (PSCs) are made of several layers with different chemical and physical features. In order for the device to function properly, these properties have to be well-matched. This dissertation deals with some of the challenges related to interfaces in PSCs, with a focus on the interface between the perovskite material itself and the subsequent charge transport layer. In particular, molecular assemblies with specific properties are deposited on the perovskite surface to functionalize it. The functionalization results in energy level alignment adjustment, interfacial losses reduction, and stability improvement. First, a strategy to tune the perovskite's energy levels is introduced: self-assembled monolayers of dipolar molecules are used to functionalize the surface, obtaining simultaneously a shift in the vacuum level position and a saturation of the dangling bonds at the surface. A shift in the vacuum level corresponds to an equal change in work function, ionization energy, and electron affinity. The direction of the shift depends on the direction of the collective interfacial dipole. The magnitude of the shift can be tailored by controlling the deposition parameters, such as the concentration of the solution used for the deposition. The shift for different molecules is characterized by several non-invasive techniques, including in particular Kelvin probe. Overall, it is shown that it is possible to shift the perovskite energy levels in both directions by several hundreds of meV. Moreover, interesting insights on the molecules deposition dynamics are revealed. Secondly, the application of this strategy in perovskite solar cells is explored. Devices with different perovskite compositions ("triple cation perovskite" and MAPbBr3) are prepared. The two resulting model systems present different energetic offsets at the perovskite/hole-transport layer interface. Upon tailored perovskite surface functionalization, the devices show a stabilized open circuit voltage (Voc) enhancement of approximately 60 meV on average for devices with MAPbBr3, while the impact is limited on triple-cation solar cells. This suggests that the proposed energy level tuning method is valid, but its effectiveness depends on factors such as the significance of the energetic offset compared to the other losses in the devices. Finally, the above presented method is further developed by incorporating the ability to interact with the perovskite surface directly into a novel hole-transport material (HTM), named PFI. The HTM can anchor to the perovskite halide ions via halogen bonding (XB). Its behaviour is compared to that of another HTM (PF) with same chemical structure and properties, except for the ability of forming XB. The interaction of perovskite with PFI and PF is characterized through UV-Vis, atomic force microscopy and Kelvin probe measurements combined with simulations. Compared to PF, PFI exhibits enhanced resilience against solvent exposure and improved energy level alignment with the perovskite layer. As a consequence, devices comprising PFI show enhanced Voc and operational stability during maximum-power-point tracking, in addition to hysteresis reduction. XB promotes the formation of a high-quality interface by anchoring to the halide ions and forming a stable and ordered interfacial layer, showing to be a particularly interesting candidate for the development of tailored charge transport materials in PSCs. Overall, the results exposed in this dissertation introduce and discuss a versatile tool to functionalize the perovskite surface and tune its energy levels. The application of this method in devices is explored and insights on its challenges and advantages are given. Within this frame, the results shed light on XB as ideal interaction for enhancing stability and efficiency in perovskite-based devices.},
  language  = {en}
}