@phdthesis{Avila2011,
  author    = {Avila, Gast{\´o}n},
  title     = {Asymptotic staticity and tensor decompositions with fast decay conditions},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-54046},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Corvino, Corvino and Schoen, Chruściel and Delay have shown the existence of a large class of asymptotically flat vacuum initial data for Einstein's field equations which are static or stationary in a neighborhood of space-like infinity, yet quite general in the interior. The proof relies on some abstract, non-constructive arguments which makes it difficult to calculate such data numerically by using similar arguments. A quasilinear elliptic system of equations is presented of which we expect that it can be used to construct vacuum initial data which are asymptotically flat, time-reflection symmetric, and asymptotic to static data up to a prescribed order at space-like infinity. A perturbation argument is used to show the existence of solutions. It is valid when the order at which the solutions approach staticity is restricted to a certain range. Difficulties appear when trying to improve this result to show the existence of solutions that are asymptotically static at higher order. The problems arise from the lack of surjectivity of a certain operator. Some tensor decompositions in asymptotically flat manifolds exhibit some of the difficulties encountered above. The Helmholtz decomposition, which plays a role in the preparation of initial data for the Maxwell equations, is discussed as a model problem. A method to circumvent the difficulties that arise when fast decay rates are required is discussed. This is done in a way that opens the possibility to perform numerical computations. The insights from the analysis of the Helmholtz decomposition are applied to the York decomposition, which is related to that part of the quasilinear system which gives rise to the difficulties. For this decomposition analogous results are obtained. It turns out, however, that in this case the presence of symmetries of the underlying metric leads to certain complications. The question, whether the results obtained so far can be used again to show by a perturbation argument the existence of vacuum initial data which approach static solutions at infinity at any given order, thus remains open. The answer requires further analysis and perhaps new methods.},
  language  = {en}
}
@phdthesis{Bergner2011,
  author    = {Bergner, Andr{\´e}},
  title     = {Synchronization in complex systems with multiple time scales},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53407},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In the present work synchronization phenomena in complex dynamical systems exhibiting multiple time scales have been analyzed. Multiple time scales can be active in different manners. Three different systems have been analyzed with different methods from data analysis. The first system studied is a large heterogenous network of bursting neurons, that is a system with two predominant time scales, the fast firing of action potentials (spikes) and the burst of repetitive spikes followed by a quiescent phase. This system has been integrated numerically and analyzed with methods based on recurrence in phase space. An interesting result are the different transitions to synchrony found in the two distinct time scales. Moreover, an anomalous synchronization effect can be observed in the fast time scale, i.e. there is range of the coupling strength where desynchronization occurs. The second system analyzed, numerically as well as experimentally, is a pair of coupled CO₂ lasers in a chaotic bursting regime. This system is interesting due to its similarity with epidemic models. We explain the bursts by different time scales generated from unstable periodic orbits embedded in the chaotic attractor and perform a synchronization analysis of these different orbits utilizing the continuous wavelet transform. We find a diverse route to synchrony of these different observed time scales. The last system studied is a small network motif of limit cycle oscillators. Precisely, we have studied a hub motif, which serves as elementary building block for scale-free networks, a type of network found in many real world applications. These hubs are of special importance for communication and information transfer in complex networks. Here, a detailed study on the mechanism of synchronization in oscillatory networks with a broad frequency distribution has been carried out. In particular, we find a remote synchronization of nodes in the network which are not directly coupled. We also explain the responsible mechanism and its limitations and constraints. Further we derive an analytic expression for it and show that information transmission in pure phase oscillators, such as the Kuramoto type, is limited. In addition to the numerical and analytic analysis an experiment consisting of electrical circuits has been designed. The obtained results confirm the former findings.},
  language  = {en}
}
@phdthesis{Bierbaum2011,
  author    = {Bierbaum, Veronika},
  title     = {Chemomechanical coupling and motor cycles of the molecular motor myosin V},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53614},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {In the living cell, the organization of the complex internal structure relies to a large extent on molecular motors. Molecular motors are proteins that are able to convert chemical energy from the hydrolysis of adenosine triphosphate (ATP) into mechanical work. Being about 10 to 100 nanometers in size, the molecules act on a length scale, for which thermal collisions have a considerable impact onto their motion. In this way, they constitute paradigmatic examples of thermodynamic machines out of equilibrium. This study develops a theoretical description for the energy conversion by the molecular motor myosin V, using many different aspects of theoretical physics. Myosin V has been studied extensively in both bulk and single molecule experiments. Its stepping velocity has been characterized as a function of external control parameters such as nucleotide concentration and applied forces. In addition, numerous kinetic rates involved in the enzymatic reaction of the molecule have been determined. For forces that exceed the stall force of the motor, myosin V exhibits a 'ratcheting' behaviour: For loads in the direction of forward stepping, the velocity depends on the concentration of ATP, while for backward loads there is no such influence. Based on the chemical states of the motor, we construct a general network theory that incorporates experimental observations about the stepping behaviour of myosin V. The motor's motion is captured through the network description supplemented by a Markov process to describe the motor dynamics. This approach has the advantage of directly addressing the chemical kinetics of the molecule, and treating the mechanical and chemical processes on equal grounds. We utilize constraints arising from nonequilibrium thermodynamics to determine motor parameters and demonstrate that the motor behaviour is governed by several chemomechanical motor cycles. In addition, we investigate the functional dependence of stepping rates on force by deducing the motor's response to external loads via an appropriate Fokker-Planck equation. For substall forces, the dominant pathway of the motor network is profoundly different from the one for superstall forces, which leads to a stepping behaviour that is in agreement with the experimental observations. The extension of our analysis to Markov processes with absorbing boundaries allows for the calculation of the motor's dwell time distributions. These reveal aspects of the coordination of the motor's heads and contain direct information about the backsteps of the motor. Our theory provides a unified description for the myosin V motor as studied in single motor experiments.},
  language  = {en}
}
@phdthesis{Doering2011,
  author    = {D{\"o}ring, Sebastian},
  title     = {Oberfl{\"a}chengitter in azobenzenhaltigen Schichten f{\"u}r organische DFB-Laser},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59211},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Ein neuentwickeltes azobenzenhaltiges Material, das auf einem supramolekularen Konzept basiert, wird bez{\"u}glich seiner Strukturbildung w{\"a}hrend einer holografischen Belichtung bei 488 nm untersucht. Im Mittelpunkt stehen dabei eindimensionale, sinusf{\"o}rmige Reliefs mit Periodizit{\"a}ten kleiner 500 nm. Es wird gezeigt, wie der Grad der Vernetzung der photosensitiven Schicht die Strukturbildung in diesem Gr{\"o}ßenbereich beeinflusst. Zur Maximierung der Strukturtiefe werden gezielt Prozessparameter der Belichtung sowie Materialparameter variiert. Unter Standardbedingungen und moderaten Belichtungsintensit{\"a}ten von ca. 200 mW/cm² bilden sich innerhalb weniger Minuten bei einer Periode von 400 nm Strukturtiefen von bis zu 80nm aus. Durch die Beeinflussung von Materialparametern, wie Oberfl{\"a}chenspannung und Viskosit{\"a}t, wird die maximale Strukturtiefe auf 160nm verdoppelt. Durch Mehrfachbelichtungen wird auch die Bildung von zweidimensionalen Gittern untersucht. Die Originalstrukturen werden in einem Abformverfahren kopiert und in Schichten von unter UV-Licht aush{\"a}rtenden Polymeren {\"u}bertragen. Durch das Abformen kommt es zu einer geringf{\"u}gigen Verschlechterung der Oberfl{\"a}chenqualit{\"a}t sowie Abnahme der Strukturtiefe. Dieser Verlust wird durch eine Verringerung der Prozesstemperatur verringert. Mithilfe kopierter Oberfl{\"a}chengitter werden organische Distributed Feedback-(DFB)-Laser zweiter Ordnung hergestellt, um den Einfluss von Gitterparametern auf die Emissionseigenschaften dieser Laser zu untersuchen. Dazu erfolgt zun{\"a}chst die Charakterisierung der optischen Verst{\"a}rkungseigenschaften ausgew{\"a}hlter organischer Emittermaterialien mittels der Variablen Strichl{\"a}ngenmethode. Das mit dem Laserfarbstoff Pyrromthen567 (PM567) dotierte Polystyrol (PS) zeigt dabei trotz konzentrationsbedingter geringer Absorption eine vergleichsweise geringe Gewinnschwelle von 50µJ/cm² bei ca. 575 nm. Das aktive Gast-Wirt-System der konjugierten Polymere MEH-PPV und F8BT* weist eine hohe Absorption und eine kleine Gewinnschwelle von 2,5 µJ/cm² bei 630 nm auf. Dieses Verhalten spiegelt sich auch in den Emissionseigenschaften der damit hergestellten DFB-Laser wieder. Die Dicke der aktiven Schichten liegen im Bereich hunderter Nanometer und wird so eingestellt, dass sich nur die transversalen Grundmoden im Wellenleiter ausbreiten k{\"o}nnen. Die Gitterperiode sind so gew{\"a}hlt, dass ein Lichtmode im Verst{\"a}rkungsbereich des Emittermaterials liegt. Die Emissionslinien der Laser sind mit FWHM-Werten von bis zu 0,3 nm spektral sehr schmalbandig und weisen auf eine sehr gute Gitterqualit{\"a}t hin. Die Untersuchungen liefern minimale Laserschwellen und maximale differentielle Effizienzen von 4,0µJ/cm² und 8,4\% f{\"u}r MEH-PPV in F8BT* (bei ca. 640nm) sowie 80 µJ/cm² und 0,9\% f{\"u}r PM567 in PS (bei ca. 575 nm). Die Vergr{\"o}ßerung der Strukturtiefe von 40nm auf 80nm in mit MEH-PPV dotierten F8BT*-Lasern zu einem deutlichen Anstieg der ausgekoppelten Energie sowie der differentiellen Effizienz und einem geringen Absinken der Laserschwelle. Dies ist ein Resultat der erh{\"o}hten Kopplung von Lasermode und Gitter. Die Emission von DFB-Lasern mit zweidimensionalen Oberfl{\"a}chengittern zeigen eine Verringerung der Divergenz aber kein Einfluss auf die Laserschwelle. Abschließend erfolgt eine Vermessung der Photostabilit{\"a}t von DFB-Lasern unter verschiedenen Bedingungen. Das Einbringen eines konjugierten Polymers in eine aktive Matrix sowie der Betrieb in einer Stickstoffatmosph{\"a}re f{\"u}hren dabei zu einer Erh{\"o}hung der Lebensdauer auf {\"u}ber eine Million Pulse. Durch die Kombination von Oberfl{\"a}chengittern in PDMS-Filmen mit elektroaktiven Substraten wird eine elektrisch steuerbare Deformation des Beugungsgitters erreicht und auf einen DFB-Laser {\"u}bertragen. Die spannungsinduzierte Verformung wird zun{\"a}chst in Beugungsexperimenten charakterisiert und ein optimaler Arbeitspunkt bestimmt. Mit den beiden Elastomeren SEBS12 und VHB4910 werden in den Gittern maximale Perioden{\"a}nderungen von 1,3\% bzw. 3,4\% bei einer Steuerspannung von 2 kV erreicht. Der Unterschied resultiert aus den verschiedenen Elastizit{\"a}tsmoduln der Materialien. {\"U}bertragen auf DFB-Laser resultiert eine Variation der Gitterperiode senkrecht zu den Gitterlinien in einer kontinuierlichen Verschiebung der Emissionswellenl{\"a}nge. Mit einem Spannungssignal von 3,25 kV wird die schmalbandige Emission eines elastischen DFB-Lasers kontinuierlich um fast 50nm von 604 nm zu 557 nm hin verschoben. Aus dem Deformationsverhalten sowohl der reinen Beugungsgitter als auch der Laser werden R{\"u}ckschl{\"u}sse auf die Elastizit{\"a}t der verwendeten Materialien gezogen und erlauben Verbesserungen der Bauteile.},
  language  = {de}
}
@misc{FedericiPohlRuppeletal.2011,
  author    = {Federici, S. and Pohl, Martin and Ruppel, J. and Telezhinsky, Igor O. and Hofmann, Werner and Martinez, M. and Knapp, J.},
  title     = {Design concepts for the Cherenkov Telescope Array CTA},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  volume    = {32},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1325},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-43014},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-430149},
  pages     = {124},
  year      = {2011},
  abstract  = {Ground-based gamma-ray astronomy has had a major breakthrough with the impressive results obtained using systems of imaging atmospheric Cherenkov telescopes. Ground-based gamma-ray astronomy has a huge potential in astrophysics, particle physics and cosmology. CTA is an international initiative to build the next generation instrument, with a factor of 5-10 improvement in sensitivity in the 100 GeV-10 TeV range and the extension to energies well below 100 GeV and above 100 TeV. CTA will consist of two arrays (one in the north, one in the south) for full sky coverage and will be operated as open observatory. The design of CTA is based on currently available technology. This document reports on the status and presents the major design concepts of CTA.},
  language  = {en}
}
@phdthesis{FloresSuarez2011,
  author    = {Flores Su{\´a}rez, Rosaura},
  title     = {Three-dimensional polarization probing in polymer ferroelectrics, polymer-dispersed liquid crystals, and polymer ferroelectrets},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60173},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {A key non-destructive technique for analysis, optimization and developing of new functional materials such as sensors, transducers, electro-optical and memory devices is presented. The Thermal-Pulse Tomography (TPT) provides high-resolution three-dimensional images of electric field and polarization distribution in a material. This thermal technique use a pulsed heating by means of focused laser light which is absorbed by opaque electrodes. The diffusion of the heat causes changes in the sample geometry, generating a short-circuit current or change in surface potential, which contains information about the spatial distribution of electric dipoles or space charges. Afterwards, a reconstruction of the internal electric field and polarization distribution in the material is possible via Scale Transformation or Regularization methods. In this way, the TPT was used for the first time to image the inhomogeneous ferroelectric switching in polymer ferroelectric films (candidates to memory devices). The results shows the typical pinning of electric dipoles in the ferroelectric polymer under study and support the previous hypotheses of a ferroelectric reversal at a grain level via nucleation and growth. In order to obtain more information about the impact of the lateral and depth resolution of the thermal techniques, the TPT and its counterpart called Focused Laser Intensity Modulation Method (FLIMM) were implemented in ferroelectric films with grid-shaped electrodes. The results from both techniques, after the data analysis with different regularization and scale methods, are in total agreement. It was also revealed a possible overestimated lateral resolution of the FLIMM and highlights the TPT method as the most efficient and reliable thermal technique. After an improvement in the optics, the Thermal-Pulse Tomography method was implemented in polymer-dispersed liquid crystals (PDLCs) films, which are used in electro-optical applications. The results indicated a possible electrostatic interaction between the COH group in the liquid crystals and the fluorinate atoms of the used ferroelectric matrix. The geometrical parameters of the LC droplets were partially reproduced as they were compared with Scanning Electron Microscopy (SEM) images. For further applications, it is suggested the use of a non-strong-ferroelectric polymer matrix. In an effort to develop new polymerferroelectrets and for optimizing their properties, new multilayer systems were inspected. The results of the TPT method showed the non-uniformity of the internal electric-field distribution in the shaped-macrodipoles and thus suggested the instability of the sample. Further investigation on multilayers ferroelectrets was suggested and the implementation of less conductive polymers layers too.},
  language  = {en}
}
@phdthesis{Kalbitz2011,
  author    = {Kalbitz, Ren{\´e}},
  title     = {Stability of polarization in organic ferroelectric metal-insulator-semiconductor structures},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-57276},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Organic thin film transistors (TFT) are an attractive option for low cost electronic applications and may be used for active matrix displays and for RFID applications. To extend the range of applications there is a need to develop and optimise the performance of non-volatile memory devices that are compatible with the solution-processing fabrication procedures used in plastic electronics. A possible candidate is an organic TFT incorporating the ferroelectric co-polymer poly(vinylidenefluoride-trifluoroethylene)(P(VDF-TrFE)) as the gate insulator. Dielectric measurements have been carried out on all-organic metal-insulator-semiconductor structures with the ferroelectric polymer poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) as the gate insu-lator. The capacitance spectra of MIS devices, were measured under different biases, showing the effect of charge accumulation and depletion on the Maxwell-Wagner peak. The position and height of this peak clearly indicates the lack of stable depletion behavior and the decrease of mobility when increasing the depletion zone width, i.e. upon moving into the P3HT bulk. The lack of stable depletion was further investigated with capacitance-voltage (C-V) measurements. When the structure was driven into depletion, C-V plots showed a positive flat-band voltage shift, arising from the change in polarization state of the ferroelectric insulator. When biased into accumulation, the polarization was reversed. It is shown that the two polarization states are stable i.e. no depolarization occurs below the coercive field. However, negative charge trapped at the semiconductor-insulator interface during the depletion cycle masks the negative shift in flat-band voltage expected during the sweep to accumulation voltages. The measured output characteristics of the studied ferroelectric-field-effect transistors confirmed the results of the C-V plots. Furthermore, the results indicated a trapping of electrons at the positively charged surfaces of the ferroelectrically polarized P(VDF-TrFE) crystallites near the insulator/semiconductor in-terface during the first poling cycles. The study of the MIS structure by means of thermally stimulated current (TSC) revealed further evidence for the stability of the polarization under depletion voltages. It was shown, that the lack of stable depletion behavior is caused by the compensation of the orientational polarization by fixed electrons at the interface and not by the depolarization of the insulator, as proposed in several publications. The above results suggest a performance improvement of non-volatile memory devices by the optimization of the interface.},
  language  = {en}
}
@phdthesis{Kellermann2011,
  author    = {Kellermann, Thorsten},
  title     = {Accurate numerical relativity simulations of non-vacuumspace-times in two dimensions and applications to critical collapse},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59578},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {This Thesis puts its focus on the physics of neutron stars and its description with methods of numerical relativity. In the first step, a new numerical framework the Whisky2D code will be developed, which solves the relativistic equations of hydrodynamics in axisymmetry. Therefore we consider an improved formulation of the conserved form of these equations. The second part will use the new code to investigate the critical behaviour of two colliding neutron stars. Considering the analogy to phase transitions in statistical physics, we will investigate the evolution of the entropy of the neutron stars during the whole process. A better understanding of the evolution of thermodynamical quantities, like the entropy in critical process, should provide deeper understanding of thermodynamics in relativity. More specifically, we have written the Whisky2D code, which solves the general-relativistic hydrodynamics equations in a flux-conservative form and in cylindrical coordinates. This of course brings in 1/r singular terms, where r is the radial cylindrical coordinate, which must be dealt with appropriately. In the above-referenced works, the flux operator is expanded and the 1/r terms, not containing derivatives, are moved to the right-hand-side of the equation (the source term), so that the left hand side assumes a form identical to the one of the three-dimensional (3D) Cartesian formulation. We call this the standard formulation. Another possibility is not to split the flux operator and to redefine the conserved variables, via a multiplication by r. We call this the new formulation. The new equations are solved with the same methods as in the Cartesian case. From a mathematical point of view, one would not expect differences between the two ways of writing the differential operator, but, of course, a difference is present at the numerical level. Our tests show that the new formulation yields results with a global truncation error which is one or more orders of magnitude smaller than those of alternative and commonly used formulations. The second part of the Thesis uses the new code for investigations of critical phenomena in general relativity. In particular, we consider the head-on-collision of two neutron stars in a region of the parameter space where two final states a new stable neutron star or a black hole, lay close to each other. In 1993, Choptuik considered one-parameter families of solutions, S[P], of the Einstein-Klein-Gordon equations for a massless scalar field in spherical symmetry, such that for every P > P⋆, S[P] contains a black hole and for every P < P⋆, S[P] is a solution not containing singularities. He studied numerically the behavior of S[P] as P → P⋆ and found that the critical solution, S[P⋆], is universal, in the sense that it is approached by all nearly-critical solutions regardless of the particular family of initial data considered. All these phenomena have the common property that, as P approaches P⋆, S[P] approaches a universal solution S[P⋆] and that all the physical quantities of S[P] depend only on |P - P⋆|. The first study of critical phenomena concerning the head-on collision of NSs was carried out by Jin and Suen in 2007. In particular, they considered a series of families of equal-mass NSs, modeled with an ideal-gas EOS, boosted towards each other and varied the mass of the stars, their separation, velocity and the polytropic index in the EOS. In this way they could observe a critical phenomenon of type I near the threshold of black-hole formation, with the putative solution being a nonlinearly oscillating star. In a successive work, they performed similar simulations but considering the head-on collision of Gaussian distributions of matter. Also in this case they found the appearance of type-I critical behaviour, but also performed a perturbative analysis of the initial distributions of matter and of the merged object. Because of the considerable difference found in the eigenfrequencies in the two cases, they concluded that the critical solution does not represent a system near equilibrium and in particular not a perturbed Tolmann-Oppenheimer-Volkoff (TOV) solution. In this Thesis we study the dynamics of the head-on collision of two equal-mass NSs using a setup which is as similar as possible to the one considered above. While we confirm that the merged object exhibits a type-I critical behaviour, we also argue against the conclusion that the critical solution cannot be described in terms of equilibrium solution. Indeed, we show that, in analogy with what is found in, the critical solution is effectively a perturbed unstable solution of the TOV equations. Our analysis also considers fine-structure of the scaling relation of type-I critical phenomena and we show that it exhibits oscillations in a similar way to the one studied in the context of scalar-field critical collapse.},
  language  = {en}
}
@phdthesis{Krey2011,
  author    = {Krey, Olaf},
  title     = {Zur Rolle der Mathematik in der Physik : Wissenschaftstheoretische Aspekte und Vorstellungen Physiklernender},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59412},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Mathematik spielt im Physikunterricht eine nicht unerhebliche Rolle - wenn auch eine zwiesp{\"a}ltige. Oft wird sie sogar zum Hindernis beim Lernen von Physik und kann ihr emanzipatorisches Potenzial nicht entfalten. Die vorliegende Arbeit stellt zwei Bausteine f{\"u}r eine begr{\"u}ndete Konzeption zum Umgang mit Mathematik beim Lernen von Physik zur Verf{\"u}gung. Im Theorieteil der Arbeit werden zum Einen wissenschaftstheoretische Aspekte der Rolle der Mathematik in der Physik aufgearbeitet und der physikdidaktischen Forschungsgemeinschaft im Zusammenhang zug{\"a}nglich gemacht. Zum anderen werden Forschungsergebnisse zu Vorstellungen Lernender {\"u}ber Physik und Mathematik sowie im Bereich der Epistemologie zusammengestellt. Im empirischen Teil der Arbeit werden Vorstellungen zur Rolle der Mathematik in der Physik von Sch{\"u}lerinnen und Sch{\"u}lern der Klassenstufen 10 und 12 sowie Physik-Lehramtstudierenden im Grundstudium mit Hilfe eines Fragebogens erhoben und unter Verwendung inhaltsanalytischer bzw. statistischer Methoden ausgewertet. Die Ergebnisse zeigen unter Anderem, dass Mathematik im Physikunterricht entgegen g{\"a}ngiger Meinungen bei den Lernenden nicht negativ, aber zumindest bei j{\"u}ngeren Lernenden formal und algorithmisch konnotiert ist.},
  language  = {de}
}
@phdthesis{Malik2011,
  author    = {Malik, Nishant},
  title     = {Extremes in events and dynamics : a nonlinear data analysis perspective on the past and present dynamics of the Indian summer monsoon},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-58016},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {To identify extreme changes in the dynamics of the Indian Summer Monsoon (ISM) in the past, I propose a new approach based on the quantification of fluctuations of a nonlinear similarity measure, to identify regimes of distinct dynamical complexity in short time series. I provide an analytical derivation for the relationship of the new measure with the dynamical invariants such as dimension and Lyapunov exponents of the underlying system. A statistical test is also developed to estimate the significance of the identified transitions. Our method is justified by uncovering bifurcation structures in several paradigmatic models, providing more complex transitions compared with traditional Lyapunov exponents. In a real world situation, we apply the method to identify millennial-scale dynamical transitions in Pleistocene proxy records of the south Asian summer monsoon system. We infer that many of these transitions are induced by the external forcing of solar insolation and are also affected by internal forcing on Monsoonal dynamics, i.e., the glaciation cycles of the Northern Hemisphere and the onset of the tropical Walker circulation. Although this new method has general applicability, it is particularly useful in analysing short palaeo-climate records. Rainfall during the ISM over the Indian subcontinent occurs in form of enormously complex spatiotemporal patterns due to the underlying dynamics of atmospheric circulation and varying topography. I present a detailed analysis of summer monsoon rainfall over the Indian peninsular using Event Synchronization (ES), a measure of nonlinear correlation for point processes such as rainfall. First, using hierarchical clustering I identify principle regions where the dynamics of monsoonal rainfall is more coherent or homogenous. I also provide a method to reconstruct the time delay patterns of rain events. Moreover, further analysis is carried out employing the tools of complex network theory. This study provides valuable insights into the spatial organization, scales, and structure of the 90th and 94th percentile rainfall events during the ISM (June to September). I furthermore analyse the influence of different critical synoptic atmospheric systems and the impact of the steep Himalayan topography on rainfall patterns. The presented method not only helps in visualising the structure of the extremeevent rainfall fields, but also identifies the water vapor pathways and decadal-scale moisture sinks over the region. Furthermore a simple scheme based on complex networks is presented to decipher the spatial intricacies and temporal evolution of monsoonal rainfall patterns over the last six decades. Some supplementary results on the evolution of monsoonal rainfall extremes over the last sixty years are also presented.},
  language  = {de}
}