@article{RinaldiFormisanoKappeletal.2019,
author = {Rinaldi, G. and Formisano, M. and Kappel, David and Capaccioni, F. and Bockelee-Morvan, D. and Cheng, Y-C and Vincent, J-B and Deshapriya, P. and Arnold, G. and Capria, M. T. and Ciarniello, M. and De Sanctis, M. C. and Doose, L. and Erard, S. and Federico, C. and Filacchione, G. and Fink, U. and Leyrat, C. and Longobardo, A. and Magni, G. and Mighorini, A. and Mottola, S. and Naletto, G. and Raponi, A. and Taylor, F. and Tosi, F. and Tozzi, G. P. and Salatti, M.},
title = {Analysis of night-side dust activity on comet 67P observed by VIRTIS-M},
series = {Astronomy and astrophysics : an international weekly journal},
volume = {630},
journal = {Astronomy and astrophysics : an international weekly journal},
publisher = {EDP Sciences},
address = {Les Ulis},
issn = {1432-0746},
doi = {10.1051/0004-6361/201834907},
pages = {16},
year = {2019},
abstract = {On 2015 July 18, near perihelion at a heliocentric distance of 1.28 au, the Visible InfraRed Thermal Imaging Spectrometer (VIRTIS-M) on board the Rosetta spacecraft had the opportunity of observing dust activity in the inner coma with a view of the night side (shadowed side) of comet 67P/Churyumov-Gerasimenko. At the time of the measurements we present here, we observe a dust plume that originates on the far side of the nucleus. We are able to identify the approximate location of its source at the boundary between the Hapi and Anuket regions, and we find that it has been in darkness for some hours before the observation. Assuming that this time span is equal to the conductive time scale, we obtain a thermal inertia in the range 25-36 W K-1 m(-2) s(-1/2). These thermal inertia values can be used to verify with a 3D finite-element method (REM) numerical code whether the surface and subsurface temperatures agree with the values found in the literature. We explored three different configurations: (1) a layer of water ice mixed with dust beneath a dust mantle of 5 mm with thermal inertia of 36 J m(-2) K-1 S-0.5 ; (2) the same structure, but with thermal inertia of 100 J m(-2) K-1 S-0.5; (3) an ice-dust mixture that is directly exposed. Of these three configurations, the first seems to be the most reasonable, both for the low thermal inertia and for the agreement with the surface and subsurface temperatures that have been found for the comet 67P/Churyumov-Gerasimenko. The spectral properties of the plume show that the visible dust color ranged from 16 +/- 4.8\%/100 nm to 13 +/- 2.6\%/100 nm, indicating that this plume has no detectable color gradient. The morphology of the plume can be classified as a narrow jet that has an estimated total ejected mass of between 6 and 19 tons when we assume size distribution indices between -2.5 and -3.},
language = {en}
}
@phdthesis{Zoeller1999,
author = {Z{\"o}ller, Gert},
title = {Analyse raumzeitlicher Muster in Erdbebendaten},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000122},
school = {Universit{\"a}t Potsdam},
year = {1999},
abstract = {Die vorliegende Arbeit besch{\"a}ftigt sich mit der Charakterisierung von Seismizit{\"a}t anhand von Erdbebenkatalogen. Es werden neue Verfahren der Datenanalyse entwickelt, die Aufschluss dar{\"u}ber geben sollen, ob der seismischen Dynamik ein stochastischer oder ein deterministischer Prozess zugrunde liegt und was daraus f{\"u}r die Vorhersagbarkeit starker Erdbeben folgt. Es wird gezeigt, dass seismisch aktive Regionen h{\"a}ufig durch nichtlinearen Determinismus gekennzeichent sind. Dies schließt zumindest die M{\"o}glichkeit einer Kurzzeitvorhersage ein. Das Auftreten seismischer Ruhe wird h{\"a}ufig als Vorl{\"a}uferphaenomen f{\"u}r starke Erdbeben gedeutet. Es wird eine neue Methode pr{\"a}sentiert, die eine systematische raumzeitliche Kartierung seismischer Ruhephasen erm{\"o}glicht. Die statistische Signifikanz wird mit Hilfe des Konzeptes der Ersatzdaten bestimmt. Als Resultat erh{\"a}lt man deutliche Korrelationen zwischen seismischen Ruheperioden und starken Erdbeben. Gleichwohl ist die Signifikanz daf{\"u}r nicht hoch genug, um eine Vorhersage im Sinne einer Aussage {\"u}ber den Ort, die Zeit und die St{\"a}rke eines zu erwartenden Hauptbebens zu erm{\"o}glichen.},
language = {en}
}
@article{HeWangHeetal.2022,
author = {He, Yushuang and Wang, Feipeng and He, Li and Wang, Qiang and Li, Jian and Qian, Yihua and Gerhard, Reimund and Plath, Ronald},
title = {An insight Into the role of Nano-Alumina on DC Flashover-Resistance and surface charge variation of Epoxy Nanocomposites},
series = {IEEE transactions on dielectrics and electrical insulation},
volume = {29},
journal = {IEEE transactions on dielectrics and electrical insulation},
number = {3},
publisher = {Inst. of Electr. and Electronics Engineers},
address = {Piscataway},
issn = {1070-9878},
doi = {10.1109/TDEI.2022.3173510},
pages = {1022 -- 1029},
year = {2022},
abstract = {The addition of nano-Al2O3 has been shown to enhance the breakdown voltage of epoxy resin, but its flashover results appeared with disputation. This work concentrates on the surface charge variation and dc flashover performance of epoxy resin with nano-Al2O3 doping. The dispersion of nano-Al2O3 in epoxy is characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The dc flashover voltages of samples under either positive or negative polarity are measured with a finger-electrode system, and the surface charge variations before and after flashovers were identified from the surface potential mapping. The results evidence that nano-Al2O3 would lead to a 16.9\% voltage drop for the negative flashovers and a 6.8\% drop for positive cases. It is found that one-time flashover clears most of the accumulated surface charges, regardless of positive or negative. As a result, the ground electrode is neighbored by an equipotential zone enclosed with low-density heterocharges. The equipotential zone tends to be broadened after 20 flashovers. The nano-Al2O3 is noticed as beneficial to downsize the equipotential zone due to its capability on charge migration, which is reasonable to maintain flashover voltage at a high level after multiple flashovers. Hence, nano-Al2O3 plays a significant role in improving epoxy with high resistance to multiple flashovers.},
language = {en}
}
@article{AbdallaAdamAharonianetal.2020,
author = {Abdalla, H. and Adam, R. and Aharonian, Felix A. and Benkhali, F. Ait and Ang{\"u}ner, Ekrem Oǧuzhan and Arcaro, C. and Armand, C. and Armstrong, T. and Ashkar, H. and Backes, M. and Baghmanyan, V. and Martins, V. Barbosa and Barnacka, A. and Barnard, M. and Becherini, Y. and Berge, D. and Bernlohr, K. and Bi, B. and Bottcher, M. and Boisson, C. and Bolmont, J. and de Lavergne, M. de Bony and Bordas, Pol and Breuhaus, M. and Brun, F. and Brun, P. and Bryan, M. and Buchele, M. and Bulik, T. and Bylund, T. and Caroff, S. and Carosi, A. and Casanova, Sabrina and Chand, T. and Chandra, S. and Chen, A. and Cotter, G. and Curylo, M. and Mbarubucyeye, J. Damascene and Davids, I. D. and Davies, J. and Deil, C. and Devin, J. and deWilt, P. and Dirson, L. and Djannati-Atai, A. and Dmytriiev, A. and Donath, A. and Doroshenko, V. and Duffy, C. and Dyks, J. and Egberts, Kathrin and Eichhorn, F. and Einecke, S. and Emery, G. and Ernenwein, J. -P. and Feijen, K. and Fegan, S. and Fiasson, A. and de Clairfontaine, G. Fichet and Fontaine, G. and Funk, S. and Fussling, Matthias and Gabici, S. and Gallant, Y. A. and Giavitto, G. and Giunti, L. and Glawion, D. and Glicenstein, J. F. and Gottschall, D. and Grondin, M. -H. and Hahn, J. and Haupt, M. and Hermann, G. and Hinton, J. A. and Hofmann, W. and Hoischen, Clemens and Holch, T. L. and Holler, M. and Horbe, M. and Horns, D. and Huber, D. and Jamrozy, M. and Jankowsky, D. and Jankowsky, F. and Jardin-Blicq, A. and Joshi, V. and Jung-Richardt, I. and Kasai, E. and Kastendieck, M. A. and Katarzynski, K. and Katz, U. and Khangulyan, D. and Khelifi, B. and Klepser, S. and Kluzniak, W. and Komin, Nu. and Konno, R. and Kosack, K. and Kostunin, D. and Kreter, M. and Lamanna, G. and Lemiere, A. and Lemoine-Goumard, M. and Lenain, J. -P. and Levy, C. and Lohse, T. and Lypova, I. and Mackey, J. and Majumdar, J. and Malyshev, D. and Malyshev, D. and Marandon, V. and Marchegiani, P. and Marcowith, Alexandre and Mares, A. and Marti-Devesa, G. and Marx, R. and Maurin, G. and Meintjes, P. J. and Meyer, M. and Mitchell, A. and Moderski, R. and Mohamed, M. and Mohrmann, L. and Montanari, A. and Moore, C. and Morris, P. and Moulin, Emmanuel and Muller, J. and Murach, T. and Nakashima, K. and Nayerhoda, A. and de Naurois, M. and Ndiyavala, H. and Niederwanger, F. and Niemiec, J. and Oakes, L. and O'Brien, Patrick and Odaka, H. and Ohm, S. and Olivera-Nieto, L. and Wilhelmi, E. de Ona and Ostrowski, M. and Oya, I. and Panter, M. and Panny, S. and Parsons, R. D. and Peron, G. and Peyaud, B. and Piel, Q. and Pita, S. and Poireau, V. and Noel, A. Priyana and Prokhorov, D. A. and Prokoph, H. and Puhlhofer, G. and Punch, M. and Quirrenbach, A. and Raab, S. and Rauth, R. and Reichherzer, P. and Reimer, A. and Reimer, O. and Remy, Q. and Renaud, M. and Rieger, F. and Rinchiuso, L. and Romoli, C. and Rowell, G. and Rudak, B. and Ruiz-Velasco, E. and Sahakian, V. and Sailer, S. and Sanchez, D. A. and Santangelo, Andrea and Sasaki, M. and Scalici, M. and Schussler, F. and Schutte, H. M. and Schwanke, U. and Schwemmer, S. and Seglar-Arroyo, M. and Senniappan, M. and Seyffert, A. S. and Shafi, N. and Shiningayamwe, K. and Simoni, R. and Sinha, A. and Sol, H. and Specovius, A. and Spencer, S. and Spir-Jacob, M. and Stawarz, L. and Sun, L. and Steenkamp, R. and Stegmann, C. and Steinmassl, S. and Steppa, C. and Takahashi, T. and Tavernier, T. and Taylor, A. M. and Terrier, R. and Tiziani, D. and Tluczykont, M. and Tomankova, L. and Trichard, C. and Tsirou, M. and Tuffs, R. and Uchiyama, Y. and van der Walt, D. J. and van Eldik, C. and van Rensburg, C. and van Soelen, B. and Vasileiadis, G. and Veh, J. and Venter, C. and Vincent, P. and Vink, J. and Volk, H. J. and Vuillaume, T. and Wadiasingh, Z. and Wagner, S. J. and Watson, J. and Werner, F. and White, R. and Wierzcholska, A. and Wong, Yu Wun and Yusafzai, A. and Zacharias, M. and Zanin, R. and Zargaryan, D. and Zdziarski, A. A. and Zech, Alraune and Zhu, S. J. and Ziegler, A. and Zorn, J. and Zouari, S. and Zywucka, N.},
title = {An extreme particle accelerator in the Galactic plane},
series = {Astronomy and astrophysics : an international weekly journal},
volume = {644},
journal = {Astronomy and astrophysics : an international weekly journal},
publisher = {EDP Sciences},
address = {Les Ulis},
organization = {HESS Collaboration},
issn = {0004-6361},
doi = {10.1051/0004-6361/202038851},
pages = {8},
year = {2020},
abstract = {The unidentified very-high-energy (VHE; E > 0.1 TeV) gamma -ray source, HESS J1826-130, was discovered with the High Energy Stereoscopic System (HESS) in the Galactic plane. The analysis of 215 h of HESS data has revealed a steady gamma -ray flux from HESS J1826-130, which appears extended with a half-width of 0.21 degrees +/- 0.02
(stat)degrees
stat degrees +/- 0.05
(sys)degrees sys degrees . The source spectrum is best fit with either a power-law function with a spectral index Gamma = 1.78 +/- 0.10(stat) +/- 0.20(sys) and an exponential cut-off at 15.2
(+5.5)(-3.2) -3.2+5.5 TeV, or a broken power-law with Gamma (1) = 1.96 +/- 0.06(stat) +/- 0.20(sys), Gamma (2) = 3.59 +/- 0.69(stat) +/- 0.20(sys) for energies below and above E-br = 11.2 +/- 2.7 TeV, respectively. The VHE flux from HESS J1826-130 is contaminated by the extended emission of the bright, nearby pulsar wind nebula, HESS J1825-137, particularly at the low end of the energy spectrum. Leptonic scenarios for the origin of HESS J1826-130 VHE emission related to PSR J1826-1256 are confronted by our spectral and morphological analysis. In a hadronic framework, taking into account the properties of dense gas regions surrounding HESS J1826-130, the source spectrum would imply an astrophysical object capable of accelerating the parent particle population up to greater than or similar to 200 TeV. Our results are also discussed in a multiwavelength context, accounting for both the presence of nearby supernova remnants, molecular clouds, and counterparts detected in radio, X-rays, and TeV energies.},
language = {en}
}
@article{NakoudiStachlewskaRitter2021,
author = {Nakoudi, Konstantina and Stachlewska, Iwona S. and Ritter, Christoph},
title = {An extended lidar-based cirrus cloud retrieval scheme},
series = {Optics express : the international electronic journal of optics / Optica},
volume = {29},
journal = {Optics express : the international electronic journal of optics / Optica},
number = {6},
publisher = {Optical Society of America},
address = {Washington},
issn = {1094-4087},
doi = {10.1364/OE.414770},
pages = {8553 -- 8580},
year = {2021},
abstract = {Accurate and precise characterization of cirrus cloud geometrical and optical properties is essential for better constraining their radiative footprint. A lidar-based retrieval scheme is proposed here, with its performance assessed on fine spatio-temporal observations over the Arctic site of Ny-Alesund, Svalbard. Two contributions related to cirrus geometrical (dynamic Wavelet Covariance Transform (WCT)) and optical properties (constrained Klett) are reported. The dynamic WCT rendered cirrus detection more robust, especially for thin cirrus layers that frequently remained undetected by the classical WCT method. Regarding optical characterization, we developed an iterative scheme for determining the cirrus lidar ratio (LRci) that is a crucial parameter for aerosol - cloud discrimination. Building upon the Klett-Fernald method, the LRci was constrained by an additional reference value. In established methods, such as the double-ended Klett, an aerosol-free reference value is applied. In the proposed constrained Klett, however, the reference value was approximated from cloud-free or low cloud optical depth (COD up to 0.2) profiles and proved to agree with independent Raman estimates. For optically thin cirrus, the constrained Klett inherent uncertainties reached 50\% (60-74\%) in terms of COD (LRci). However, for opaque cirrus COD (LRci) uncertainties were lower than 10\% (15\%). The detection method discrepancies (dynamic versus static WCT) had a higher impact on the optical properties of low COD layers (up to 90\%) compared to optically thicker ones (less than 10\%). The constrained Klett presented high agreement with two established retrievals. For an exemplary cirrus cloud, the constrained Klett estimated the COD355 (LRci355) at 0.28 +/- 0.17 (29 +/- 4 sr), the double-ended Klett at 0.27 +/- 0.15 (32 +/- 4 sr) and the Raman retrievals at 0.22 +/- 0.12 (26 +/- 11 sr). Our approach to determine the necessary reference value can also be applied in established methods and increase their accuracy. In contrast, the classical aerosol-free assumption led to 44 sr LRci overestimation in optically thin layers and 2-8 sr in thicker ones. The multiple scattering effect was corrected using Eloranta (1998) and accounted for 50-60\% extinction underestimation near the cloud base and 20-30\% within the cirrus layers.},
language = {en}
}
@article{Grebenkov2022,
author = {Grebenkov, Denis S.},
title = {An encounter-based approach for restricted diffusion with a gradient drift},
series = {Journal of physics : A, Mathematical and theoretical},
volume = {55},
journal = {Journal of physics : A, Mathematical and theoretical},
number = {4},
publisher = {IOP Publ. Ltd.},
address = {Bristol},
issn = {1751-8113},
doi = {10.1088/1751-8121/ac411a},
pages = {34},
year = {2022},
abstract = {We develop an encounter-based approach for describing restricted diffusion with a gradient drift toward a partially reactive boundary. For this purpose, we introduce an extension of the Dirichlet-to-Neumann operator and use its eigenbasis to derive a spectral decomposition for the full propagator, i.e. the joint probability density function for the particle position and its boundary local time. This is the central quantity that determines various characteristics of diffusion-influenced reactions such as conventional propagators, survival probability, first-passage time distribution, boundary local time distribution, and reaction rate. As an illustration, we investigate the impact of a constant drift onto the boundary local time for restricted diffusion on an interval. More generally, this approach accesses how external forces may influence the statistics of encounters of a diffusing particle with the reactive boundary.},
language = {en}
}
@article{SmirnovShpritsAllisonetal.2022,
author = {Smirnov, Artem and Shprits, Yuri and Allison, Hayley and Aseev, Nikita and Drozdov, Alexander and Kollmann, Peter and Wang, Dedong and Saikin, Anthony},
title = {An empirical model of the equatorial electron pitch angle distributions in earth's outer radiation belt},
series = {Space Weather: the International Journal of Research and Applications},
volume = {20},
journal = {Space Weather: the International Journal of Research and Applications},
number = {9},
publisher = {American Geophysical Union},
address = {Washington, DC},
issn = {1542-7390},
doi = {10.1029/2022SW003053},
pages = {17},
year = {2022},
abstract = {In this study, we present an empirical model of the equatorial electron pitch angle distributions (PADs) in the outer radiation belt based on the full data set collected by the Magnetic Electron Ion Spectrometer (MagEIS) instrument onboard the Van Allen Probes in 2012-2019. The PADs are fitted with a combination of the first, third and fifth sine harmonics. The resulting equation resolves all PAD types found in the outer radiation belt (pancake, flat-top, butterfly and cap PADs) and can be analytically integrated to derive omnidirectional flux. We introduce a two-step modeling procedure that for the first time ensures a continuous dependence on L, magnetic local time and activity, parametrized by the solar wind dynamic pressure. We propose two methods to reconstruct equatorial electron flux using the model. The first approach requires two uni-directional flux observations and is applicable to low-PA data. The second method can be used to reconstruct the full equatorial PADs from a single uni- or omnidirectional measurement at off-equatorial latitudes. The model can be used for converting the long-term data sets of electron fluxes to phase space density in terms of adiabatic invariants, for physics-based modeling in the form of boundary conditions, and for data assimilation purposes.},
language = {en}
}
@phdthesis{Bastian2023,
author = {Bastian, Martin},
title = {An emergent machine learning approach for seasonal cyclone activity forecasts},
school = {Universit{\"a}t Potsdam},
pages = {135},
year = {2023},
abstract = {Seasonal forecasts are of great interest in many areas. Knowing the amount of precipitation for the upcoming season in regions of water scarcity would facilitate a better water management. If farmers knew the weather conditions of the upcoming summer at sowing time, they could select those cereal species that are best adapted to these conditions. This would allow farmers to improve the harvest and potentially even reduce the amount of pesticides used. However, the undoubted advantages of seasonal forecasts are often opposed by their high degree of uncertainty. The great challenge of generating seasonal forecasts with lead times of several months mainly originates from the chaotic nature of the earth system. In a chaotic system, even tiny differences in the initial conditions can lead to strong deviations in the system's state in the long run. In this dissertation we propose an emergent machine learning approach for seasonal forecasting, called the AnlgModel. The AnlgModel combines the analogue method with myopic feature selection and bootstrapping. To benchmark the abilities of the AnlgModel we apply it to seasonal cyclone activity forecasts in the North Atlantic and Northwest Pacific. The AnlgModel demonstrates competitive hindcast skills with two operational forecasts and even outperforms these for long lead times. In the second chapter we comprehend the forecasting strategy of the Anlg-Model. We thereby analyse the analogue selection process for the 2017 North Atlantic and the 2018 Northwest Pacific seasonal cyclone activity. The analysis shows that those climate indices which are known to influence the seasonal cyclone activity, such as the Ni{\~n}o 3.4 SST, are correctly represented among the selected analogues. Furthermore the selected analogues reflect large-scale climate patterns that were identified by expert reports as being determinative for these particular seasons. In the third chapter we analyse the features that are used by the AnlgModel for its predictions. We therefore inspect the feature relevance (FR). The FR patterns learned by the AnlgModel show a high congruence with the predictor regions used by the operational forecasts. However, the AnlgModel also discovered new features, such as the SST anomaly in the Gulf of Guinea during November. This SST pattern exhibits a remarkably high predictive potential for the upcoming Atlantic hurricane activity. In the final chapter we investigate potential mechanisms, that link two of these regions with high feature relevance to the Atlantic hurricane activity. We mainly focus on ocean surface transport. The ocean surface flow paths are calculated using Lagrangian particle analysis. We demonstrate that the FR patterns in the region of the Canary islands do not correspond with ocean surface transport. It is instead likely that these FR patterns fingerprint a wind transport of latent heat. The second region to be studied is situated in the Gulf of Guinea. Our analysis shows that the FR patterns seen there do fingerprint ocean surface transport. However, our simulations also show that at least one other mechanism is involved in linking the Gulf of Guinea SST anomaly in November to the hurricane activity of the upcoming season. In this work the AnlgModel does not only demonstrate its outstanding forecast skills but also shows its capabilities as research tool for detecting oceanic and atmospheric mechanisms.},
language = {en}
}
@misc{CiemerRehmKurthsetal.2020,
author = {Ciemer, Catrin and Rehm, Lars and Kurths, J{\"u}rgen and Donner, Reik Volker and Winkelmann, Ricarda and Boers, Niklas},
title = {An early-warning indicator for Amazon droughts exclusively based on tropical Atlantic sea surface temperatures},
series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
number = {9},
issn = {1866-8372},
doi = {10.25932/publishup-52586},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-525863},
pages = {12},
year = {2020},
abstract = {Droughts in tropical South America have an imminent and severe impact on the Amazon rainforest and affect the livelihoods of millions of people. Extremely dry conditions in Amazonia have been previously linked to sea surface temperature (SST) anomalies in the adjacent tropical oceans. Although the sources and impacts of such droughts have been widely studied, establishing reliable multi-year lead statistical forecasts of their occurrence is still an ongoing challenge. Here, we further investigate the relationship between SST and rainfall anomalies using a complex network approach. We identify four ocean regions which exhibit the strongest overall SST correlations with central Amazon rainfall, including two particularly prominent regions in the northern and southern tropical Atlantic. Based on the time-dependent correlation between SST anomalies in these two regions alone, we establish a new early-warning method for droughts in the central Amazon basin and demonstrate its robustness in hindcasting past major drought events with lead-times up to 18 months.},
language = {en}
}
@article{CiemerRehmKurthsetal.2020,
author = {Ciemer, Catrin and Rehm, Lars and Kurths, J{\"u}rgen and Donner, Reik Volker and Winkelmann, Ricarda and Boers, Niklas},
title = {An early-warning indicator for Amazon droughts exclusively based on tropical Atlantic sea surface temperatures},
series = {Environmental Research Letters},
volume = {15},
journal = {Environmental Research Letters},
number = {9},
publisher = {IOP - Institute of Physics Publishing},
address = {Bristol},
pages = {10},
year = {2020},
abstract = {Droughts in tropical South America have an imminent and severe impact on the Amazon rainforest and affect the livelihoods of millions of people. Extremely dry conditions in Amazonia have been previously linked to sea surface temperature (SST) anomalies in the adjacent tropical oceans. Although the sources and impacts of such droughts have been widely studied, establishing reliable multi-year lead statistical forecasts of their occurrence is still an ongoing challenge. Here, we further investigate the relationship between SST and rainfall anomalies using a complex network approach. We identify four ocean regions which exhibit the strongest overall SST correlations with central Amazon rainfall, including two particularly prominent regions in the northern and southern tropical Atlantic. Based on the time-dependent correlation between SST anomalies in these two regions alone, we establish a new early-warning method for droughts in the central Amazon basin and demonstrate its robustness in hindcasting past major drought events with lead-times up to 18 months.},
language = {en}
}
@misc{AllefeldKurths2004,
author = {Allefeld, Carsten and Kurths, J{\"u}rgen},
title = {An approach to multivariate phase synchronization analysis and its application to event-related potentials},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-20106},
year = {2004},
abstract = {A method for the multivariate analysis of statistical phase synchronization phenomena in empirical data is presented. A first statistical approach is complemented by a stochastic dynamic model, to result in a data analysis algorithm which can in a specific sense be shown to be a generic multivariate statistical phase synchronization analysis. The method is applied to EEG data from a psychological experiment, obtaining results which indicate the relevance of this method in the context of cognitive science as well as in other fields.},
language = {en}
}
@article{DavidzonIlbertFaisstetal.2018,
author = {Davidzon, Iary and Ilbert, Olivier and Faisst, Andreas L. and Sparre, Martin and Capak, Peter L.},
title = {An Alternate Approach to Measure Specific Star Formation Rates at 2 < z < 7},
series = {The astrophysical journal : an international review of spectroscopy and astronomical physics},
volume = {852},
journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics},
number = {2},
publisher = {IOP Publ. Ltd.},
address = {Bristol},
issn = {0004-637X},
doi = {10.3847/1538-4357/aaa19e},
pages = {11},
year = {2018},
abstract = {We trace the specific star formation rate (sSFR) of massive star-forming galaxies (greater than or similar to 10(10)M(circle dot)) from z similar to 2 to 7. Our method is substantially different from previous analyses, as it does not rely on direct estimates of star formation rate, but on the differential evolution of the galaxy stellar mass function (SMF). We show the reliability of this approach by means of semianalytical and hydrodynamical cosmological simulations. We then apply it to real data, using the SMFs derived in the COSMOS and CANDELS fields. We find that the sSFR is proportional to (1 + z)(1.1) (+/-) (0.2) at z > 2, in agreement with other observations but in tension with the steeper evolution predicted by simulations from z similar to 4 to 2. We investigate the impact of several sources of observational bias, which, however, cannot account for this discrepancy. Although the SMF of high-redshift galaxies is still affected by significant errors, we show that future large-area surveys will substantially reduce them, making our method an effective tool to probe the massive end of the main sequence of star-forming galaxies.},
language = {en}
}
@unpublished{MaassPereverzevRamlauetal.1998,
author = {Maaß, Peter and Pereverzev, Sergei V. and Ramlau, Ronny and Solodky, Sergei G.},
title = {An adaptive discretization for Tikhonov-Phillips regularization with a posteriori parameter selection},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-14739},
year = {1998},
abstract = {The aim of this paper is to describe an efficient strategy for descritizing ill-posed linear operator equations of the first kind: we consider Tikhonov-Phillips-regularization χ^δ α = (a * a + α I)^-1 A * y ^δ with a finite dimensional approximation A n instead of A. We propose a sparse matrix structure which still leads to optimal convergences rates but requires substantially less scalar products for computing A n compared with standard methods.},
language = {en}
}
@phdthesis{Nagel2019,
author = {Nagel, Oliver},
title = {Amoeboid cells as a transport system for micro-objects},
doi = {10.25932/publishup-44219},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-442192},
school = {Universit{\"a}t Potsdam},
pages = {x, 84},
year = {2019},
abstract = {Due to advances in science and technology towards smaller and more powerful processing units, the fabrication of micrometer sized machines for different tasks becomes more and more possible. Such micro-robots could revolutionize medical treatment of diseases and shall support to work on other small machines. Nevertheless, scaling down robots and other devices is a challenging task and will probably remain limited in near future. Over the past decade the concept of bio-hybrid systems has proved to be a promising approach in order to advance the further development of micro-robots. Bio-hybrid systems combine biological cells with artificial components, thereby benefiting from the functionality of living biological cells. Cell-driven micro-transport is one of the most prominent applications in the emerging field of these systems. So far, micrometer sized cargo has been successfully transported by means of swimming bacterial cells. The potential of motile adherent cells as transport systems has largely remained unexplored. This thesis concentrates on the social amoeba Dictyostelium discoideum as a potential candidate for an amoeboid bio-hybrid transport system. The use of this model organism comes with several advantages. Due to the unspecific properties of Dictyostelium adhesion, a wide range of different cargo materials can be used for transport. As amoeboid cells exceed bacterial cells in size by one order of magnitude, also the size of an object carried by a single cell can also be much larger for an amoeba. Finally it is possible to guide the cell-driven transport based on the chemotactic behavior of the amoeba. Since cells undergo a developmentally induced chemotactic aggregation, cargo could be assembled in a self-organized manner into a cluster. It is also possible to impose an external chemical gradient to guide the amoeboid transport system to a desired location. To establish Dictyostelium discoideum as a possible candidate for bio-hybrid transport systems, this thesis will first investigate the movement of single cells. Secondly, the interaction of cargo and cells will be studied. Eventually, a conceptional proof will be conducted, that the cheomtactic behavior can be exploited either to transport a cargo self-organized or through an external chemical source.},
language = {en}
}
@article{PelisoliVosGeieretal.2020,
author = {Pelisoli, Ingrid and Vos, Joris and Geier, Stephan and Schaffenroth, Veronika and Baran, Andrzej S.},
title = {Alone but not lonely},
series = {Astronomy and astrophysics : an international weekly journal},
volume = {642},
journal = {Astronomy and astrophysics : an international weekly journal},
publisher = {EDP Sciences},
address = {Les Ulis},
issn = {0004-6361},
doi = {10.1051/0004-6361/202038473},
pages = {14},
year = {2020},
abstract = {Context. Hot subdwarfs are core-helium burning stars that show lower masses and higher temperatures than canonical horizontal branch stars. They are believed to be formed when a red giant suffers an extreme mass-loss episode. Binary interaction is suggested to be the main formation channel, but the high fraction of apparently single hot subdwarfs (up to 30\%) has prompted single star formation scenarios to be proposed.Aims. We investigate the possibility that hot subdwarfs could form without interaction by studying wide binary systems. If single formation scenarios were possible, there should be hot subdwarfs in wide binaries that have undergone no interaction.Methods. Angular momentum accretion during interaction is predicted to cause the hot subdwarf companion to spin up to the critical velocity. The effect of this should still be observable given the timescales of the hot subdwarf phase. To study the rotation rates of companions, we have analysed light curves from the Transiting Exoplanet Survey Satellite for all known hot subdwarfs showing composite spectral energy distributions indicating the presence of a main sequence wide binary companion. If formation without interaction were possible, that would also imply the existence of hot subdwarfs in very wide binaries that are not predicted to interact. To identify such systems, we have searched for common proper motion companions with projected orbital distances of up to 0.1 pc to all known spectroscopically confirmed hot subdwarfs using Gaia DR2 astrometry.Results. We find that the companions in composite hot subdwarfs show short rotation periods when compared to field main sequence stars. They display a triangular-shaped distribution with a peak around 2.5 days, similar to what is observed for young open clusters. We also report a shortage of hot subdwarfs with candidate common proper motion companions. We identify only 16 candidates after probing 2938 hot subdwarfs with good astrometry. Out of those, at least six seem to be hierarchical triple systems, in which the hot subdwarf is part of an inner binary.Conclusions. The observed distribution of rotation rates for the companions in known wide hot subdwarf binaries provides evidence of previous interaction causing spin-up. Additionally, there is a shortage of hot subdwarfs in common proper motion pairs, considering the frequency of such systems among progenitors. These results suggest that binary interaction is always required for the formation of hot subdwarfs.},
language = {en}
}
@article{StolterfohtLang2022,
author = {Stolterfoht, Martin and Lang, Felix},
title = {All-perovskite tandems get flexible},
series = {Nature energy},
volume = {7},
journal = {Nature energy},
number = {8},
publisher = {Nature Publishing Group},
address = {London},
issn = {2058-7546},
doi = {10.1038/s41560-022-01087-6},
pages = {688 -- 689},
year = {2022},
abstract = {Flexible all-perovskite tandem photovoltaics open up new opportunities for application compared to rigid devices, yet their performance lags behind. Now, researchers show that molecule-bridged interfaces mitigate charge recombination and crack formation, improving the efficiency and mechanical reliability of flexible devices.},
language = {en}
}
@article{ShivhareErdmannHoermannetal.2018,
author = {Shivhare, Rishi and Erdmann, Tim and Hoermann, Ulrich and Collado-Fregoso, Elisa and Zeiske, Stefan and Benduhn, Johannes and Ullbrich, Sascha and Huebner, Rene and Hambsch, Mike and Kiriy, Anton and Voit, Brigitte and Neher, Dieter and Vandewal, Koen and Mannsfeld, Stefan C. B.},
title = {Alkyl Branching Position in Diketopyrrolopyrrole Polymers},
series = {Chemistry of materials : a publication of the American Chemical Society},
volume = {30},
journal = {Chemistry of materials : a publication of the American Chemical Society},
number = {19},
publisher = {American Chemical Society},
address = {Washington},
issn = {0897-4756},
doi = {10.1021/acs.chemmater.8b02739},
pages = {6801 -- 6809},
year = {2018},
abstract = {Diketopyrrolopyrrole (DPP)-based donor acceptor copolymers have gained a significant amount of research interest in the organic electronics community because of their high charge carrier mobilities in organic field-effect transistors (OFETs) and their ability to harvest near-infrared (NIR) photons in solar cells. In this study, we have synthesized four DPP based donor-acceptor copolymers with variations in the donor unit and the branching point of the solubilizing alkyl chains (at the second or sixth carbon position). Grazing incidence wide-angle X-ray scattering (GIWAXS) results suggest that moving the branching point further away from the polymer backbone increases the tendency for aggregation and yields polymer phases with a higher degree of crystallinity (DoC). The polymers were blended with PC70BM and used as active layers in solar cells. A careful analysis of the energetics of the neat polymer and blend films reveals that the charge-transfer state energy (E-CT) of the blend films lies exceptionally close to the singlet energy of the donor (E-D*), indicating near zero electron transfer losses. The difference between the optical gap and open-circuit voltage (V-OC) is therefore determined to be due to rather high nonradiative 418 +/- 13 mV) and unavoidable radiative voltage losses (approximate to 255 +/- 8 mV). Even though the four materials have similar optical gaps, the short-circuit current density (J(SC)) covers a vast span from 7 to 18 mA cm(-2) for the best performing system. Using photoluminescence (PL) quenching and transient charge extraction techniques, we quantify geminate and nongeminate losses and find that fewer excitons reach the donor-acceptor interface in polymers with further away branching points due to larger aggregate sizes. In these material systems, the photogeneration is therefore mainly limited by exciton harvesting efficiency.},
language = {en}
}
@phdthesis{Kegeles2018,
author = {Kegeles, Alexander},
title = {Algebraic foundation of Group Field Theory},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-421014},
school = {Universit{\"a}t Potsdam},
pages = {124},
year = {2018},
abstract = {In this thesis we provide a construction of the operator framework starting from the functional formulation of group field theory (GFT). We define operator algebras on Hilbert spaces whose expectation values in specific states provide correlation functions of the functional formulation. Our construction allows us to give a direct relation between the ingredients of the functional GFT and its operator formulation in a perturbative regime. Using this construction we provide an example of GFT states that can not be formulated as states in a Fock space and lead to math- ematically inequivalent representations of the operator algebra. We show that such inequivalent representations can be grouped together by their symmetry properties and sometimes break the left translation symmetry of the GFT action. We interpret these groups of inequivalent representations as phases of GFT, similar to the classification of phases that we use in QFT's on space-time.},
language = {en}
}
@phdthesis{Gidion2018,
author = {Gidion, Gunnar},
title = {Akustische Resonatoren zur Analyse und Kontrolle von schwingungsf{\"a}higen Systemen am Beispiel von Streichinstrumenten und Dielektrischen Elastomeraktoren},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-411772},
school = {Universit{\"a}t Potsdam},
pages = {190},
year = {2018},
abstract = {Die Klangeigenschaften von Musikinstrumenten werden durch das Zusammenwirken der auf ihnen anregbaren akustischen Schwingungsmoden bestimmt, welche sich wiederum aus der geometrischen Struktur des Resonators in Kombination mit den verwendeten Materialien ergeben. In dieser Arbeit wurde das Schwingungsverhalten von Streichinstrumenten durch den Einsatz minimal-invasiver piezoelektrischer Polymerfilmsensoren untersucht. Die studierten Kopplungsph{\"a}nomene umfassen den sogenannten Wolfton und Schwingungstilger, die zu dessen Abschw{\"a}chung verwendet werden, sowie die gegenseitige Beeinflussung von Bogen und Instrument beim Spielvorgang. An Dielektrischen Elastomeraktormembranen wurde dagegen der Einfluss der elastischen Eigenschaften des Membranmaterials auf das akustische und elektromechanische Schwingungsverhalten gezeigt. Die Dissertation gliedert sich in drei Teile, deren wesentliche Ergebnisse im Folgenden zusammengefasst werden. In Teil I wurde die Funktionsweise eines abstimmbaren Schwingungstilgers zur D{\"a}mpfung von Wolft{\"o}nen auf Streichinstrumenten untersucht. Durch Abstimmung der Resonanzfrequenz des Schwingungstilgers auf die Wolftonfrequenz kann ein Teil der Saitenschwingungen absorbiert werden, so dass die zu starke Anregung der Korpusresonanz vermieden wird, die den Wolfton verursacht. Der Schwingungstilger besteht aus einem „Wolft{\"o}ter", einem Massest{\"u}ck, welches auf der Nachl{\"a}nge der betroffenen Saite (zwischen Steg und Saitenhalter) installiert wird. Hier wurde gezeigt, wie die Resonanzen dieses Schwingungstilgers von der Masse des Wolft{\"o}ters und von dessen Position auf der Nachl{\"a}nge abh{\"a}ngen. Aber auch die Geometrie des Wolft{\"o}ters stellte sich als ausschlaggebend heraus, insbesondere bei einem nicht-rotationssymmetrischen Wolft{\"o}ter: In diesem Fall entsteht - basierend auf den zu erwartenden nicht-harmonischen Moden einer massebelasteten Saite - eine zus{\"a}tzliche Mode, die von der Polarisationsrichtung der Saitenschwingung abh{\"a}ngt. Teil II der Dissertation befasst sich mit Elastomermembranen, die als Basis von Dielektrischen Elastomeraktoren dienen, und die wegen der Membranspannung auch akustische Resonanzen aufweisen. Die Ansprache von Elastomeraktoren h{\"a}ngt unter anderem von der Geschwindigkeit der elektrischen Anregung ab. Die damit zusammenh{\"a}ngenden viskoelastischen Eigenschaften der hier verwendeten Elastomere, Silikon und Acrylat, wurden einerseits in einer frequenzabh{\"a}ngigen dynamisch-mechanischen Analyse des Elastomers erfasst, andererseits auch optisch an vollst{\"a}ndigen Aktoren selbst gemessen. Die h{\"o}here Viskosit{\"a}t des Acrylats, das bei tieferen Frequenzen h{\"o}here Aktuationsdehnungen als das Silikon zeigt, f{\"u}hrt zu einer Verminderung der Dehnungen bei h{\"o}heren Frequenzen, so dass {\"u}ber etwa 40 Hertz mit Silikon gr{\"o}ßere Aktuationsdehnungen erreicht werden. Mit den untersuchten Aktoren konnte die Gitterkonstante weicher optischer Beugungsgitter kontrolliert werden, die als zus{\"a}tzlicher Film auf der Membran installiert wurden. {\"U}ber eine Messung der akustischen Resonanzfrequenz von Elastomermebranen aus Acrylat in 1Abh{\"a}ngigkeit von ihrer Vorstreckung konnte in Verbindung mit einer Modellierung des hyperelastischen Verhaltens des Elastomers (Ogden-Modell) der Schermodul bestimmt werden. Schließlich wird in Teil III die Untersuchung von Geigen und ihrer Streichanregung mit Hilfe minimal-invasiver piezoelektrischer Polymerfilme geschildert. Es konnten am Bogen und am Steg von Geigen - unter den beiden F{\"u}ßen des Stegs - jeweils zwei Filmsensoren installiert werden. Mit den beiden Sensoren am Steg wurden Frequenzg{\"a}nge von Geigen gemessen, welche eine Bestimmung der frequenzabh{\"a}ngigen Stegbewegung erlaubten. Diese Methode erm{\"o}glicht damit auch eine umfassende Charakterisierung der Signaturmoden in Bezug auf die Stegdynamik. Die Ergebnisse der komplement{\"a}ren Methoden von Impulsanregung und nat{\"u}rlichem Spielen der Geigen konnten dank der Sensoren verglichen werden. F{\"u}r die Nutzung der Sensoren am Bogen - insbesondere f{\"u}r eine Messung des Bogendrucks - wurde eine Kalibrierung des Bogen-Sensor-Systems mit Hilfe einer Materialpr{\"u}fmaschine durchgef{\"u}hrt. Bei einer Messung w{\"a}hrend des nat{\"u}rlichen Spielens wurde mit den Sensoren am Bogen einerseits die {\"U}bertragung der Saitenschwingung auf den Bogen festgestellt. Dabei konnten außerdem longitudinale Bogenhaarresonanzen identifiziert werden, die von der Position der Saite auf dem Bogen abh{\"a}ngen. Aus der Analyse dieses Ph{\"a}nomens konnte die longitudinale Wellengeschwindigkeit der Bogenhaare bestimmt werden, die eine wichtige Gr{\"o}ße f{\"u}r die Kopplung zwischen Saite und Bogen ist. Mit Hilfe des Systems aus Sensoren an Bogen und Steg werden auf Grundlage der vorliegenden Arbeit Studien an Streichinstrumenten vorgeschlagen, in denen die Bespielbarkeit der Instrumente zu den jeweils angeregten Steg- und Bogenschwingungen in Beziehung gesetzt werden kann. Damit k{\"o}nnte nicht zuletzt auch die bisher nicht vollst{\"a}ndig gekl{\"a}rte Rolle des Bogens f{\"u}r Klang und Bespielbarkeit besser beurteilt werden},
language = {de}
}
@phdthesis{Lampert2009,
author = {Lampert, Astrid},
title = {Airborne lidar observations of tropospheric arctic clouds},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41211},
school = {Universit{\"a}t Potsdam},
year = {2009},
abstract = {Due to the unique environmental conditions and different feedback mechanisms, the Arctic region is especially sensitive to climate changes. The influence of clouds on the radiation budget is substantial, but difficult to quantify and parameterize in models. In the framework of the PhD, elastic backscatter and depolarization lidar observations of Arctic clouds were performed during the international Arctic Study of Tropospheric Aerosol, Clouds and Radiation (ASTAR) from Svalbard in March and April 2007. Clouds were probed above the inaccessible Arctic Ocean with a combination of airborne instruments: The Airborne Mobile Aerosol Lidar (AMALi) of the Alfred Wegener Institute for Polar and Marine Research provided information on the vertical and horizontal extent of clouds along the flight track, optical properties (backscatter coefficient), and cloud thermodynamic phase. From the data obtained by the spectral albedometer (University of Mainz), the cloud phase and cloud optical thickness was deduced. Furthermore, in situ observations with the Polar Nephelometer, Cloud Particle Imager and Forward Scattering Spectrometer Probe (Laboratoire de M{\´e}t{\´e}orologie Physique, France) provided information on the microphysical properties, cloud particle size and shape, concentration, extinction, liquid and ice water content. In the thesis, a data set of four flights is analyzed and interpreted. The lidar observations served to detect atmospheric structures of interest, which were then probed by in situ technique. With this method, an optically subvisible ice cloud was characterized by the ensemble of instruments (10 April 2007). Radiative transfer simulations based on the lidar, radiation and in situ measurements allowed the calculation of the cloud forcing, amounting to -0.4 W m-2. This slight surface cooling is negligible on a local scale. However, thin Arctic clouds have been reported more frequently in winter time, when the clouds' effect on longwave radiation (a surface warming of 2.8 W m-2) is not balanced by the reduced shortwave radiation (surface cooling). Boundary layer mixed-phase clouds were analyzed for two days (8 and 9 April 2007). The typical structure consisting of a predominantly liquid water layer on cloud top and ice crystals below were confirmed by all instruments. The lidar observations were compared to European Centre for Medium-Range Weather Forecasts (ECMWF) meteorological analyses. A change of air masses along the flight track was evidenced in the airborne data by a small completely glaciated cloud part within the mixed-phase cloud system. This indicates that the updraft necessary for the formation of new cloud droplets at cloud top is disturbed by the mixing processes. The measurements served to quantify the shortcomings of the ECMWF model to describe mixed-phase clouds. As the partitioning of cloud condensate into liquid and ice water is done by a diagnostic equation based on temperature, the cloud structures consisting of a liquid cloud top layer and ice below could not be reproduced correctly. A small amount of liquid water was calculated for the lowest (and warmest) part of the cloud only. Further, the liquid water content was underestimated by an order of magnitude compared to in situ observations. The airborne lidar observations of 9 April 2007 were compared to space borne lidar data on board of the satellite Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO). The systems agreed about the increase of cloud top height along the same flight track. However, during the time delay of 1 h between the lidar measurements, advection and cloud processing took place, and a detailed comparison of small-scale cloud structures was not possible. A double layer cloud at an altitude of 4 km was observed with lidar at the West coast in the direct vicinity of Svalbard (14 April 2007). The cloud system consisted of two geometrically thin liquid cloud layers (each 150 m thick) with ice below each layer. While the upper one was possibly formed by orographic lifting under the influence of westerly winds, or by the vertical wind shear shown by ECMWF analyses, the lower one might be the result of evaporating precipitation out of the upper layer. The existence of ice precipitation between the two layers supports the hypothesis that humidity released from evaporating precipitation was cooled and consequently condensed as it experienced the radiative cooling from the upper layer. In summary, a unique data set characterizing tropospheric Arctic clouds was collected with lidar, in situ and radiation instruments. The joint evaluation with meteorological analyses allowed a detailed insight in cloud properties, cloud evolution processes and radiative effects.},
language = {en}
}