@phdthesis{Zeuschner2022,
  author    = {Zeuschner, Steffen Peer},
  title     = {Magnetoacoustics observed with ultrafast x-ray diffraction},
  doi       = {10.25932/publishup-56109},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-561098},
  school      = {Universit{\"a}t Potsdam},
  pages     = {V, 128, IX},
  year      = {2022},
  abstract  = {In the present thesis I investigate the lattice dynamics of thin film hetero structures of magnetically ordered materials upon femtosecond laser excitation as a probing and manipulation scheme for the spin system. The quantitative assessment of laser induced thermal dynamics as well as generated picosecond acoustic pulses and their respective impact on the magnetization dynamics of thin films is a challenging endeavor. All the more, the development and implementation of effective experimental tools and comprehensive models are paramount to propel future academic and technological progress. In all experiments in the scope of this cumulative dissertation, I examine the crystal lattice of nanoscale thin films upon the excitation with femtosecond laser pulses. The relative change of the lattice constant due to thermal expansion or picosecond strain pulses is directly monitored by an ultrafast X-ray diffraction (UXRD) setup with a femtosecond laser-driven plasma X-ray source (PXS). Phonons and spins alike exert stress on the lattice, which responds according to the elastic properties of the material, rendering the lattice a versatile sensor for all sorts of ultrafast interactions. On the one hand, I investigate materials with strong magneto-elastic properties; The highly magnetostrictive rare-earth compound TbFe2, elemental Dysprosium or the technological relevant Invar material FePt. On the other hand I conduct a comprehensive study on the lattice dynamics of Bi1Y2Fe5O12 (Bi:YIG), which exhibits high-frequency coherent spin dynamics upon femtosecond laser excitation according to the literature. Higher order standing spinwaves (SSWs) are triggered by coherent and incoherent motion of atoms, in other words phonons, which I quantified with UXRD. We are able to unite the experimental observations of the lattice and magnetization dynamics qualitatively and quantitatively. This is done with a combination of multi-temperature, elastic, magneto-elastic, anisotropy and micro-magnetic modeling. The collective data from UXRD, to probe the lattice, and time-resolved magneto-optical Kerr effect (tr-MOKE) measurements, to monitor the magnetization, were previously collected at different experimental setups. To improve the precision of the quantitative assessment of lattice and magnetization dynamics alike, our group implemented a combination of UXRD and tr-MOKE in a singular experimental setup, which is to my knowledge, the first of its kind. I helped with the conception and commissioning of this novel experimental station, which allows the simultaneous observation of lattice and magnetization dynamics on an ultrafast timescale under identical excitation conditions. Furthermore, I developed a new X-ray diffraction measurement routine which significantly reduces the measurement time of UXRD experiments by up to an order of magnitude. It is called reciprocal space slicing (RSS) and utilizes an area detector to monitor the angular motion of X-ray diffraction peaks, which is associated with lattice constant changes, without a time-consuming scan of the diffraction angles with the goniometer. RSS is particularly useful for ultrafast diffraction experiments, since measurement time at large scale facilities like synchrotrons and free electron lasers is a scarce and expensive resource. However, RSS is not limited to ultrafast experiments and can even be extended to other diffraction techniques with neutrons or electrons.},
  language  = {en}
}
@phdthesis{Mayer2022,
  author    = {Mayer, Dennis},
  title     = {Time-resolved x-ray spectroscopy of 2-thiouracil},
  doi       = {10.25932/publishup-57163},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-571636},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiv, 169},
  year      = {2022},
  abstract  = {In this thesis, I present my contributions to the field of ultrafast molecular spectroscopy. Using the molecule 2-thiouracil as an example, I use ultrashort x-ray pulses from free- electron lasers to study the relaxation dynamics of gas-phase molecular samples. Taking advantage of the x-ray typical element- and site-selectivity, I investigate the charge flow and geometrical changes in the excited states of 2-thiouracil. In order to understand the photoinduced dynamics of molecules, knowledge about the ground-state structure and the relaxation after photoexcitation is crucial. Therefore, a part of this thesis covers the electronic ground-state spectroscopy of mainly 2-thiouracil to provide the basis for the time-resolved experiments. Many of the previously published studies that focused on the gas-phase time-resolved dynamics of thionated uracils after UV excitation relied on information from solution phase spectroscopy to determine the excitation energies. This is not an optimal strategy as solvents alter the absorption spec- trum and, hence, there is no guarantee that liquid-phase spectra resemble the gas-phase spectra. Therefore, I measured the UV-absorption spectra of all three thionated uracils to provide a gas-phase reference and, in combination with calculations, we determined the excited states involved in the transitions. In contrast to the UV absorption, the literature on the x-ray spectroscopy of thionated uracil is sparse. Thus, we measured static photoelectron, Auger-Meitner and x-ray absorption spectra on the sulfur L edge before or parallel to the time-resolved experiments we performed at FLASH (DESY, Hamburg). In addition, (so far unpublished) measurements were performed at the synchrotron SOLEIL (France) which have been included in this thesis and show the spin-orbit splitting of the S 2p photoline and its satellite which was not observed at the free-electron laser. The relaxation of 2-thiouracil has been studied extensively in recent years with ultrafast visible and ultraviolet methods showing the ultrafast nature of the molecular process after photoexcitation. Ultrafast spectroscopy probing the core-level electrons provides a complementary approach to common optical ultrafast techniques. The method inherits its local sensitivity from the strongly localised core electrons. The core energies and core-valence transitions are strongly affected by local valence charge and geometry changes, and past studies have utilised this sensitivity to investigate the molecular process reflected by the ultrafast dynamics. We have built an apparatus that provides the requirements to perform time-resolved x-ray spectroscopy on molecules in the gas phase. With the apparatus, we performed UV-pump x-ray-probe electron spectroscopy on the S 2p edge of 2-thiouracil using the free-electron laser FLASH2. While the UV triggers the relaxation dynamics, the x-ray probes the single sulfur atom inside the molecule. I implemented photoline self-referencing for the photoelectron spectral analysis. This minimises the spectral jitter of the FEL, which is due to the underlying self-amplified spontaneous emission (SASE) process. With this approach, we were not only able to study dynamical changes in the binding energy of the electrons but also to detect an oscillatory behaviour in the shift of the observed photoline, which we associate with non-adiabatic dynamics involving several electronic states. Moreover, we were able to link the UV-induced shift in binding energy to the local charge flow at the sulfur which is directly connected to the electronic state. Furthermore, the analysis of the Auger-Meitner electrons shows that energy shifts observed at early stages of the photoinduced relaxation are related to the geometry change in the molecule. More specifically, the observed increase in kinetic energy of the Auger-Meitner electrons correlates with a previously predicted C=S bond stretch.},
  language  = {en}
}
@phdthesis{Vu2022,
  author    = {Vu, Nils Leif},
  title     = {A task-based parallel elliptic solver for numerical relativity with discontinuous Galerkin methods},
  doi       = {10.25932/publishup-56226},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-562265},
  school      = {Universit{\"a}t Potsdam},
  pages     = {172},
  year      = {2022},
  abstract  = {Elliptic partial differential equations are ubiquitous in physics. In numerical relativity---the study of computational solutions to the Einstein field equations of general relativity---elliptic equations govern the initial data that seed every simulation of merging black holes and neutron stars. In the quest to produce detailed numerical simulations of these most cataclysmic astrophysical events in our Universe, numerical relativists resort to the vast computing power offered by current and future supercomputers. To leverage these computational resources, numerical codes for the time evolution of general-relativistic initial value problems are being developed with a renewed focus on parallelization and computational efficiency. Their capability to solve elliptic problems for accurate initial data must keep pace with the increasing detail of the simulations, but elliptic problems are traditionally hard to parallelize effectively. In this thesis, I develop new numerical methods to solve elliptic partial differential equations on computing clusters, with a focus on initial data for orbiting black holes and neutron stars. I develop a discontinuous Galerkin scheme for a wide range of elliptic equations, and a stack of task-based parallel algorithms for their iterative solution. The resulting multigrid-Schwarz preconditioned Newton-Krylov elliptic solver proves capable of parallelizing over 200 million degrees of freedom to at least a few thousand cores, and already solves initial data for a black hole binary about ten times faster than the numerical relativity code SpEC. I also demonstrate the applicability of the new elliptic solver across physical disciplines, simulating the thermal noise in thin mirror coatings of interferometric gravitational-wave detectors to unprecedented accuracy. The elliptic solver is implemented in the new open-source SpECTRE numerical relativity code, and set up to support simulations of astrophysical scenarios for the emerging era of gravitational-wave and multimessenger astronomy.},
  language  = {en}
}
@article{Regenstein2022,
  author    = {Regenstein, Wolfgang},
  title     = {Statistische Beschreibung des Resonanzenergietransfers in L{\"o}sungen},
  doi       = {10.25932/publishup-56500},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-565009},
  pages     = {23},
  year      = {2022},
  abstract  = {In resonance energy transfer, photons are transferred from an excited donor to an acceptor over an interaction distance. According to F{\"o}rster's quantum mechanical theory, this distance can be calculated using the overlap integral of the fluorescence spectrum of the donor and the absorption spectrum of the acceptor. Another possibility of determination is obtained with the help of statistical models, which are compiled in an overview. The distance can be determined by evaluating the extinction curve. In this work, a further statistical variant of the determination of the interaction radius is added and demonstrated in detail using an example.},
  language  = {de}
}
@misc{XuZhouMetzleretal.2022,
  author    = {Xu, Pengbo and Zhou, Tian and Metzler, Ralf and Deng, Weihua},
  title     = {Stochastic harmonic trapping of a L{\´e}vy walk: transport and first-passage dynamics under soft resetting strategies},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-56040},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-560402},
  pages     = {1 -- 28},
  year      = {2022},
  abstract  = {We introduce and study a L{\´e}vy walk (LW) model of particle spreading with a finite propagation speed combined with soft resets, stochastically occurring periods in which an harmonic external potential is switched on and forces the particle towards a specific position. Soft resets avoid instantaneous relocation of particles that in certain physical settings may be considered unphysical. Moreover, soft resets do not have a specific resetting point but lead the particle towards a resetting point by a restoring Hookean force. Depending on the exact choice for the LW waiting time density and the probability density of the periods when the harmonic potential is switched on, we demonstrate a rich emerging response behaviour including ballistic motion and superdiffusion. When the confinement periods of the soft-reset events are dominant, we observe a particle localisation with an associated non-equilibrium steady state. In this case the stationary particle probability density function turns out to acquire multimodal states. Our derivations are based on Markov chain ideas and LWs with multiple internal states, an approach that may be useful and flexible for the investigation of other generalised random walks with soft and hard resets. The spreading efficiency of soft-rest LWs is characterised by the first-passage time statistic.},
  language  = {en}
}
@misc{TeichmannLewandowskiAlemani2022,
  author    = {Teichmann, Erik and Lewandowski, Heather J. and Alemani, Micol},
  title     = {Investigating students' views of experimental physics in German laboratory classes},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-56042},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-560429},
  pages     = {010135-1 -- 010135-17},
  year      = {2022},
  abstract  = {There is a large variety of goals instructors have for laboratory courses, with different courses focusing on different subsets of goals. An often implicit, but crucial, goal is to develop students' attitudes, views, and expectations about experimental physics to align with practicing experimental physicists. The assessment of laboratory courses upon this one dimension of learning has been intensively studied in U.S. institutions using the Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS). However, there is no such an instrument available to use in Germany, and the influence of laboratory courses on students views about the nature of experimental physics is still unexplored at German-speaking institutions. Motivated by the lack of an assessment tool to investigate this goal in laboratory courses at German-speaking institutions, we present a translated version of the E-CLASS adapted to the context at German-speaking institutions. We call the German version of the E-CLASS, the GE-CLASS. We describe the translation process and the creation of an automated web-based system for instructors to assess their laboratory courses. We also present first results using GE-CLASS obtained at the University of Potsdam. A first comparison between E-CLASS and GE-CLASS results shows clear differences between University of Potsdam and U.S. students' views and beliefs about experimental physics.},
  language  = {en}
}
@phdthesis{Schemenz2022,
  author    = {Schemenz, Victoria},
  title     = {Correlations between osteocyte lacuno-canalicular network and material characteristics in bone adaptation and regeneration},
  doi       = {10.25932/publishup-55959},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-559593},
  school      = {Universit{\"a}t Potsdam},
  pages     = {3, xii, 146},
  year      = {2022},
  abstract  = {The complex hierarchical structure of bone undergoes a lifelong remodeling process, where it adapts to mechanical needs. Hereby, bone resorption by osteoclasts and bone formation by osteoblasts have to be balanced to sustain a healthy and stable organ. Osteocytes orchestrate this interplay by sensing mechanical strains and translating them into biochemical signals. The osteocytes are located in lacunae and are connected to one another and other bone cells via cell processes through small channels, the canaliculi. Lacunae and canaliculi form a network (LCN) of extracellular spaces that is able to transport ions and enables cell-to-cell communication. Osteocytes might also contribute to mineral homeostasis by direct interactions with the surrounding matrix. If the LCN is acting as a transport system, this should be reflected in the mineralization pattern. The central hypothesis of this thesis is that osteocytes are actively changing their material environment. Characterization methods of material science are used to achieve the aim of detecting traces of this interaction between osteocytes and the extracellular matrix. First, healthy murine bones were characterized. The properties analyzed were then compared with three murine model systems: 1) a loading model, where a bone of the mouse was loaded during its life time; 2) a healing model, where a bone of the mouse was cut to induce a healing response; and 3) a disease model, where the Fbn1 gene is dysfunctional causing defects in the formation of the extracellular tissue. The measurement strategy included routines that make it possible to analyze the organization of the LCN and the material components (i.e., the organic collagen matrix and the mineral particles) in the same bone volumes and compare the spatial distribution of different data sets. The three-dimensional network architecture of the LCN is visualized by confocal laser scanning microscopy (CLSM) after rhodamine staining and is then subsequently quantified. The calcium content is determined via quantitative backscattered electron imaging (qBEI), while small- and wide-angle X-ray scattering (SAXS and WAXS) are employed to determine the thickness and length of local mineral particles. First, tibiae cortices of healthy mice were characterized to investigate how changes in LCN architecture can be attributed to interactions of osteocytes with the surrounding bone matrix. The tibial mid-shaft cross-sections showed two main regions, consisting of a band with unordered LCN surrounded by a region with ordered LCN. The unordered region is a remnant of early bone formation and exhibited short and thin mineral particles. The surrounding, more aligned bone showed ordered and dense LCN as well as thicker and longer mineral particles. The calcium content was unchanged between the two regions. In the mouse loading model, the left tibia underwent two weeks of mechanical stimulation, which results in increased bone formation and decreased resorption in skeletally mature mice. Here the specific research question addressed was how do bone material characteristics change at (re)modeling sites? The new bone formed in response to mechanical stimulation showed similar properties in terms of the mineral particles, like the ordered calcium region but lower calcium content compared to the right, non-loaded control bone of the same mice. There was a clear, recognizable border between mature and newly formed bone. Nevertheless, some canaliculi went through this border connecting the LCN of mature and newly formed bone. Additionally, the question should be answered whether the LCN topology and the bone matrix material properties adapt to loading. Although, mechanically stimulated bones did not show differences in calcium content compared to controls, different correlations were found between the local LCN density and the local Ca content depending on whether the bone was loaded or not. These results suggest that the LCN may serve as a mineral reservoir. For the healing model, the femurs of mice underwent an osteotomy, stabilized with an external fixator and were allowed to heal for 21 days. Thus, the spatial variations in the LCN topology with mineral properties within different tissue types and their interfaces, namely calcified cartilage, bony callus and cortex, could be simultaneously visualized and compared in this model. All tissue types showed structural differences across multiple length scales. Calcium content increased and became more homogeneous from calcified cartilage to bony callus to lamellar cortical bone. The degree of LCN organization increased as well, while the lacunae became smaller, as did the lacunar density between these different tissue types that make up the callus. In the calcified cartilage, the mineral particles were short and thin. The newly formed callus exhibited thicker mineral particles, which still had a low degree of orientation. While most of the callus had a woven-like structure, it also served as a scaffold for more lamellar tissue at the edges. The lamelar bone callus showed thinner mineral particles, but a higher degree of alignment in both, mineral particles and the LCN. The cortex showed the highest values for mineral length, thickness and degree of orientation. At the same time, the lacunae number density was 34\% lower and the lacunar volume 40\% smaller compared to bony callus. The transition zone between cortical and callus regions showed a continuous convergence of bone mineral properties and lacunae shape. Although only a few canaliculi connected callus and the cortical region, this indicates that communication between osteocytes of both tissues should be possible. The presented correlations between LCN architecture and mineral properties across tissue types may suggest that osteocytes have an active role in mineralization processes of healing. A mouse model for the disease marfan syndrome, which includes a genetic defect in the fibrillin-1 gene, was investigated. In humans, Marfan syndrome is characterized by a range of clinical symptoms such as long bone overgrowth, loose joints, reduced bone mineral density, compromised bone microarchitecture, and increased fracture rates. Thus, fibrillin-1 seems to play a role in the skeletal homeostasis. Therefore, the present work studied how marfan syndrome alters LCN architecture and the surrounding bone matrix. The mice with marfan syndrome showed longer tibiae than their healthy littermates from an age of seven weeks onwards. In contrast, the cortical development appeared retarded, which was observed across all measured characteristics, i. e. lower endocortical bone formation, looser and less organized lacuno-canalicular network, less collagen orientation, thinner and shorter mineral particles. In each of the three model systems, this study found that changes in the LCN architecture spatially correlated with bone matrix material parameters. While not knowing the exact mechanism, these results provide indications that osteocytes can actively manipulate a mineral reservoir located around the canaliculi to make a quickly accessible contribution to mineral homeostasis. However, this interaction is most likely not one-sided, but could be understood as an interplay between osteocytes and extra-cellular matrix, since the bone matrix contains biochemical signaling molecules (e.g. non-collagenous proteins) that can change osteocyte behavior. Bone (re)modeling can therefore not only be understood as a method for removing defects or adapting to external mechanical stimuli, but also for increasing the efficiency of possible osteocyte-mineral interactions during bone homeostasis. With these findings, it seems reasonable to consider osteocytes as a target for drug development related to bone diseases that cause changes in bone composition and mechanical properties. It will most likely require the combined effort of materials scientists, cell biologists, and molecular biologists to gain a deeper understanding of how bone cells respond to their material environment.},
  language  = {en}
}
@phdthesis{Nayak2022,
  author    = {Nayak, Abani Shankar},
  title     = {Design, Characterization and On-sky Testing of an Integrated Optics Device for Stellar Interferometry: from Pupil Remappers to Discrete Beam Combiner},
  doi       = {10.25932/publishup-55874},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-558743},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xl, 175},
  year      = {2022},
  abstract  = {Stellar interferometry is the only method in observational astronomy for obtaining the highest resolution images of astronomical targets. This method is based on combining light from two or more separate telescopes to obtain the complex visibility that contains information about the brightness distribution of an astronomical source. The applications of stellar interferometry have made significant contributions in the exciting research areas of astronomy and astrophysics, including the precise measurement of stellar diameters, imaging of stellar surfaces, observations of circumstellar disks around young stellar objects, predictions of Einstein's General relativity at the galactic center, and the direct search for exoplanets to name a few. One important related technique is aperture masking interferometry, pioneered in the 1960s, which uses a mask with holes at the re-imaged pupil of the telescope, where the light from the holes is combined using the principle of stellar interferometry. While this can increase the resolution, it comes with a disadvantage. Due to the finite size of the holes, the majority of the starlight (typically > 80 \%) is lost at the mask, thus limiting the signal-to-noise ratio (SNR) of the output images. This restriction of aperture masking only to the bright targets can be avoided using pupil remapping interferometry - a technique combining aperture masking interferometry and advances in photonic technologies using single-mode fibers. Due to the inherent spatial filtering properties, the single-mode fibers can be placed at the focal plane of the re-imaged pupil, allowing the utilization of the whole pupil of the telescope to produce a high-dynamic range along with high-resolution images. Thus, pupil remapping interferometry is one of the most promising application areas in the emerging field of astrophotonics. At the heart of an interferometric facility, a beam combiner exists whose primary function is to combine light to obtain high-contrast fringes. A beam combiner can be as simple as a beam splitter or an anamorphic lens to combine light from 2 apertures (or telescopes) or as complex as a cascade of beam splitters and lenses to combine light for > 2 apertures. However, with the field of astrophotonics, interferometric facilities across the globe are increasingly employing some form of photonics technologies by using single-mode fibers or integrated optics (IO) chips as an efficient way to combine light from several apertures. The state-of-the-art instrument - GRAVITY at the very large telescope interferometer (VLTI) facility uses an IO-based beam combiner device reaching visibilities accuracy of better than < 0.25 \%, which is roughly 50× as precise as a few decades back. Therefore, in the context of IO-based components for applications in stellar interferometry, this Thesis describes the work towards the development of a 3-dimensional (3-D) IO device - a monolithic astrophotonics component containing both the pupil remappers and a discrete beam combiner (DBC). In this work, the pupil remappers are 3-D single-mode waveguides in a glass substrate collecting light from the re-imaged pupil of the telescope and feeding the light to a DBC, where the combination takes place. The DBC is a lattice of 3-D single-mode waveguides, which interact through evanescent coupling. By observing the output power of single-mode waveguides of the DBC, the visibilities are retrieved by using a calibrated transfer matrix ({U}) of the device. The feasibility of the DBC in retrieving the visibilities theoretically and experimentally had already been studied in the literature but was only limited to laboratory tests with monochromatic light sources. Thus, a part of this work extends these studies by investigating the response of a 4-input DBC to a broad-band light source. Hence, the objectives of this Thesis are the following: 1) Design an IO device for broad-band light operation such that accurate and precise visibilities could be retrieved experimentally at astronomical H-band (1.5-1.65 μm), and 2) Validation of the DBC as a possible beam combination scheme for future interferometric facilities through on-sky testing at the William Herschel Telescope (WHT). This work consisted of designing three different 3-D IO devices. One of the popular methods for fabricating 3-D photonic components in a glass substrate is ultra-fast laser inscription (ULI). Thus, manufacturing of the designed devices was outsourced to Politecnico di Milano as part of an iterative fabrication process using their state-of-the-art ULI facility. The devices were then characterized using a 2-beam Michelson interferometric setup obtaining both the monochromatic and polychromatic visibilities. The retrieved visibilities for all devices were in good agreement as predicted by the simulation results of a DBC, which confirms both the repeatability of the ULI process and the stability of the Michelson setup, thus fulfilling the first objective. The best-performing device was then selected for the pupil-remapping of the WHT using a different optical setup consisting of a deformable mirror and a microlens array. The device successfully collected stellar photons from Vega and Altair. The visibilities were retrieved using a previously calibrated {U} but showed significant deviations from the expected results. Based on the analysis of comparable simulations, it was found that such deviations were primarily caused by the limited SNR of the stellar observations, thus constituting a first step towards the fulfillment of the second objective.},
  language  = {en}
}
@misc{SarabadaniMetzlerAlaNissila2022,
  author    = {Sarabadani, Jalal and Metzler, Ralf and Ala-Nissila, Tapio},
  title     = {Driven polymer translocation into a channel: Isoflux tension propagation theory and Langevin dynamics simulations},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1292},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-57438},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-574387},
  pages     = {033003-1 -- 033003-14},
  year      = {2022},
  abstract  = {Isoflux tension propagation (IFTP) theory and Langevin dynamics (LD) simulations are employed to study the dynamics of channel-driven polymer translocation in which a polymer translocates into a narrow channel and the monomers in the channel experience a driving force fc. In the high driving force limit, regardless of the channel width, IFTP theory predicts τ ∝ f βc for the translocation time, where β = -1 is the force scaling exponent. Moreover, LD data show that for a very narrow channel fitting only a single file of monomers, the entropic force due to the subchain inside the channel does not play a significant role in the translocation dynamics and the force exponent β = -1 regardless of the force magnitude. As the channel width increases the number of possible spatial configurations of the subchain inside the channel becomes significant and the resulting entropic force causes the force exponent to drop below unity.},
  language  = {en}
}
@misc{SmirnovBolotovBolotovetal.2022,
  author    = {Smirnov, Lev A. and Bolotov, Maxim and Bolotov, Dmitri and Osipov, Grigory V. and Pikovsky, Arkady},
  title     = {Finite-density-induced motility and turbulence of chimera solitons},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1291},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-57428},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-574281},
  pages     = {15},
  year      = {2022},
  abstract  = {We consider a one-dimensional oscillatory medium with a coupling through a diffusive linear field. In the limit of fast diffusion this setup reduces to the classical Kuramoto-Battogtokh model. We demonstrate that for a finite diffusion stable chimera solitons, namely localized synchronous domain in an infinite asynchronous environment, are possible. The solitons are stable also for finite density of oscillators, but in this case they sway with a nearly constant speed. This finite-density-induced motility disappears in the continuum limit, as the velocity of the solitons is inverse proportional to the density. A long-wave instability of the homogeneous asynchronous state causes soliton turbulence, which appears as a sequence of soliton mergings and creations. As the instability of the asynchronous state becomes stronger, this turbulence develops into a spatio-temporal intermittency.},
  language  = {en}
}